Samsung SGH E640 User Manual

* Depending on the software installed or your service provider or county,

some of the descriptions in this manual may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this manual.

Printed in Korea

Code No.:GH68-07335A

English. 06/2005. Rev 1.0

World Wide Web

http://www.samsungmobile.com

Drive safely at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 92.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

•

MP3 player

Play MP3 music files using your

phone as a MP3 player.

Indicates that you can get more information

on the referenced page.

ꢀ

→

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

•

Bluetooth

Send photos, images, videos, and

other personal data, and connect

to other devices using free,

wireless Bluetooth technology.

[

]

Indicates a key on the phone. For example,

[

]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For example,

<Menu>

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

E-mail

Name card

Send and receive e-mails with image, video, and

audio attachments.

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

•

Java

Enjoy Java™-based embedded

games and download new games.

•

Web browser

Access the wireless web and access

various services and up-to-the-

minute information.

•

Calendar

Keep track of your daily, weekly,

and monthly schedule.

•

Voice clarity

•

Voice recorder

Record memos or sounds.

Use the voice clarity feature to increase the

volume and clarity of an incoming call, even in the

midst of a crowd.

Browse the web ................................................... 17

Use Phonebook .................................................... 17

Send messages.................................................... 18

View messages .................................................... 20

Use Bluetooth...................................................... 21

Contents

Unpack

Make sure you have each item

Your phone

Enter text

T9, ABC, Number, and Symbol mode

Call functions

Buttons, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operating your phone

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone.......................................... 12

Make/Answer calls................................................ 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Index

100

Begin with your camera, music, and other special features

Use camera......................................................... 15

Play MP3s ........................................................... 16

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call records

ꢀ

p.29

Applications

ꢀ

p.36

5 Messages

ꢀ

p.47

7 Calendar

8 Camera

9 Settings

ꢀ

p.66

p.70

p.78

Current contacts

Missed calls

Dialled calls

Received calls

Delete all

ꢀp.29

ꢀp.30

ꢀp.31

MP3 player

Voice recorder

Java world

World time

Alarm

Calculator

Converter

Timer

ꢀp.36

ꢀp.38

ꢀp.40

ꢀp.41

ꢀp.42

ꢀp.43

Create new message

My messages

Templates

Delete all

Settings

Broadcast messages

Memory status

ꢀp.47

ꢀp.50

ꢀp.56

ꢀp.62

Call time

Time & Date

Phone settings

Display settings

Sound settings

Network services

Bluetooth

Security

Memory status

Reset settings

ꢀp.78

ꢀp.79

ꢀp.81

ꢀp.82

ꢀp.85

ꢀp.88

ꢀp.89

Call costs^*

2 Phonebook

ꢀp.31

6 File manager

ꢀp.63

Stopwatch

SIM AT*

Contact list

FDN list

Add new contact

Group

Speed dial

My name card

Own number

Management

Service number*

ꢀp.31

ꢀp.32

ꢀp.33

ꢀp.34

ꢀp.35

ꢀp.36

Images

Videos

Music

Sounds

Other files

Memory status

ꢀp.63

ꢀp.64

ꢀp.65

Browser

ꢀp.43

Home

Bookmarks

Go to URL

Clear cache

Profile settings

Current profile

ꢀp.44

ꢀp.45

ꢀp.46

* Shows only if supported by your SIM

card.

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece/

Speaker

Display

Phone

Travel adapter

Navigation keys

(Up/Down/Left/

Right)

Camera

Flash

Web access/

Confirm key

Camera key

Headset jack

Soft key (left)

Dial key

User’s manual

Battery

External

display

Soft key (right)

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

Volume keys

Cancel/Correct

key

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Alphanumeric

keys

Special

function keys

Microphone

Get started

First steps to operating your phone

Plug the travel adapter

into the phone.

Install the battery.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Plug the adapter into a standard AC wall outlet.

Remove the battery.

Insert the SIM card.

When the phone is completely charged (the battery

icon stops blinking), unplug the adapter from the

power outlet.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding

[

Get started

Power on or off

Remove the adapter from the phone.

Switch on

1. Open the phone.

2. Press and hold [ ] to turn on

the phone.

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

press <OK>.

use is prohibited.

Low battery indicator

When the battery is low:

1. Open the phone.

Switch off

•

a warning tone sounds,

the battery low message displays, and

2. Press and hold [ ].

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

End a call.

Hold down to switch the phone on and off.

In Menu mode, cancel input and return the

phone to Idle mode.

Key(s) Description

Perform the function indicated on the

bottom line of the display.

Enter numbers, letters, and some special

characters.

In Idle mode, hold [1] down to access your

In Idle mode, access your favourite menus

directly.ꢀp. 78

voicemail server. Hold [

international prefix.

0] down to enter an

In Menu mode, scroll through the menu

options.

Enter special characters.

In Idle mode, hold [ down to activate or

deactivate Quiet mode. Hold [ ] down to

insert a pause between numbers.

In Idle mode, launch the web browser.

In Menu mode, select the highlighted

menu option.

]

Delete characters from the display.

In Menu mode, return to the previous

menu level.

Adjust the phone volume.

In Idle mode, with the phone open, adjust

the keypad tone volume. With the phone

closed, hold down to turn on the backlight.

Send or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

In Idle mode, hold down to turn on the

camera.

In Camera mode, take a photo or record a

video.

Get started

Display

Icons

(continued)

New e-mail received or being sent

One of the message Inboxes is full

Call diverting feature is active

Layout

The display has the three areas.

Icons

display various icons.

ꢀp. 82

Bluetooth feature is active

ꢀp. 85

Text and graphics

display messages,

instructions, and

GPRS network

information you enter.

Home Zone, if you have registered

for the appropriate service

Soft key function indicators

show the current functions

assigned to the two soft

keys.

Contacts

Office Zone, if you have registered

for the appropriate service

Call ringer set to vibrate

Icons

Received signal strength

Call in progress

ꢀp. 81

Quiet mode is active

Battery power level

ꢀp. 81

Out of your service area; you cannot

send or receive calls

Alarm set

* The icons shown on the display may vary, depending

on your country or service provider.

New text message

New voicemail message

New multimedia message

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [

] to

Contacts

confirm the function displayed

or option highlighted.

4. To exit, choose either of the

following methods.

•

Press <Back> or [

move up one level.

C] to

•

Press [ ] to return to Idle

mode.

Press the right soft

key to access

Contact list in the

Phonebook menu.

Press the left soft

key to access

Menu mode.

Use shortcuts Press the number key

corresponding to the option you

want.

Get started

Customise your phone

You can set your wallpaper for the

main or external display.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings Display

settings Wallpaper

and select Settings

settings Language

2. Select a language.

→

Phone

language

→

Main

display or Cover display

2. Select an image category and

then an image.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ring tone

→

Sound

→

Incoming call

→

For Cover display, you can

select Cover title to enter text

to be displayed on the external

display.

2. Press [Left] or [Right] and

select a ringer category.

3. Press [Up] or [Down] and select

a ringer melody.

3. Press <Save>.

4. Press <Save>.

You can change the colour for the

display components, such as title

bars and highlight bars.

You can use the Navigation keys as

shortcut keys to access specific

menus directly from Idle mode.

Menu mode

skin colour

shortcuts

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

To assign a menu to a key:

→

1. In Idle mode, press <Menu

and select Settings Phone

settings Short cut

2. Scroll to a key.

3. Press <Options> and select

Change

→

You can switch to Quiet mode to

avoid disturbing other people with

your phone sound.

Quiet mode

4. Scroll to a menu to be assigned

to the key.

Press and hold

[

]

in Idle mode.

5. Press <Save>.

Get started

Make/Answer calls

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on powerup.

Phone lock

1. In Idle mode, enter an area code

and phone number.

2. Press

3. To end the call, press

Make a call

[

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

[

→

1. When the phone is ringing, press

Answer a call

[

2. To end the call, press

[

“00000000” and press <OK>.

3. Enter a new 4- to 8- digit

Press [ ].

Adjust the

volume during

a call

password and press <OK>.

4. Enter the new password again

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Step outside the phone

Begin with your camera, music, and other special features

Use camera

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

2. Press [1] to switch to Record

mode.

3. Press [ ] to start recording.

1. Open the phone.

Take a photo

4. Press [ ] to stop recording.

The video is saved

2. In Idle mode, press and hold

[

] to turn on the camera.

automatically.

3. Aim the lens at the subject and

adjust the image.

5. Press the right soft key to

record another video.

4. Press [ ] to take a photo. The

photo is saved automatically.

1. In Record mode, press the left

Play a video

5. Press [

photo.

] to take another

soft key and select Go to

videos

2. Select the video you want.

1. In Capture mode, press the left

View a photo

soft key and select Go to

photos

2. Select the photo you want

Step outside the phone

Play MP3s

1. From the MP3 player screen,

press [ ].

Play MP3 file

Copy MP3 files Use these methods:

2. During playback, use the

following keys:

to the phone

•

Download from the wireless

web p. 43

ꢀ

•

[

]: pauses/resumes

•

Download from a computer

using Samsung PC Studio

playback.

•

[Left]: goes back to the

previous file. Moves

backward in a file when held

down.

ꢀSamsung PC Studio User’s

Guide

•

Receive via Bluetoothꢀp. 87

•

[Right]: skips to the next

file. Moves forward in a file

when held down.

[Up]: opens the play list.

[Down]: stops playback.

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add to list Add all or Add a

file

Create a play

list

→

•

→

[

]: adjusts the volume.

3. For Add a file, select a specific

file and press <Add>. Repeat

from step 2.

Browse the web

Use Phonebook

Using the web browser, you can get easy access to the

wireless web to get a variety of up-to-date services

and information and to enjoy downloads of web

content.

To the phone’s memory:

Add an entry

1. In Idle mode, enter a phone

number and press <Options>.

2. Select Save

→

Phone

→

number type.

In Idle mode, press [

Launch the

browser

3. Specify the contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Graphic ID, Alert, Group, and

Notes.

•

To scroll through browser items,

press [Up] or [Down].

Navigate with

the web

browser

•

To select an item, press <

4. Press [

] to save the entry.

To return to the previous page,

press <Back> or [ ].

To return to the homepage,

hold down [ ].

To access browser options,

To the SIM card:

1. In Idle mode, enter a phone

•

number and press <Options>.

2. Select Save

3. Enter a name.

4. Press [ ] to save the entry.

→

SIM.

press [ ] or select

top of the screen.

on the

Step outside the phone

Send messages

1. In Idle mode, press

Contacts>.

Find an entry

1. In Idle mode, press <Menu

Send a text

2. Select an entry.

and select Messages

new message Text

message

2. Enter the message text.

3. Press <Options> and select

→

Create

message (SMS)

→

3. Select a number and press

[

]

to dial, or press <Options> to

access options.

1. In Idle mode, press <Menu

and select Phonebook My

name card

Create and

send a name

card

Save and send or Send only

→

4. Enter destination numbers.

5. Press [

message.

] to send the

2. Specify your contact

information.

3. Press [

card.

] to save the name

1. In Idle mode, press <Menu

and select Messages Create

new message Multimedia

message

2. Select Subject

3. Enter the message subject and

press [ ].

Send a

→

multimedia

message

(MMS)

4. To send the name card to other

→

people, press <Options> and

select Send via

→

SMS/MMS/

Email Bluetooth

4. Select Picture & Video

→

1. In Idle mode, press <Menu

Send a

Send an e-mail

Pictures or Videos

→

and select Messages

→

Create

multimedia

message

(MMS)

category.

new message

→

5. Select a photo or a video clip

2. Select Subject

(continued)

and press <Add>.

3. Enter the e-mail subject and

press [ ].

4. Select Message

5. Enter the e-mail text and press

6. Select File attach

6. Select Sound

7. Select a sound clip and press

Add>.

8. Select Message

9. Enter the message text and

press [ ].

10. Press <Options> and select

Send

11. Enter destination numbers.

12. Press [ ] to send the

message.

→

a category.

[

7. Add image, video, music, or

sound files.

8. Press <Options> and select

Send

9. Enter e-mail addresses.

10. Press [

e-mail.

] to send the

Step outside the phone

View messages

From the Inbox:

View a

multimedia

message

1. In Idle mode, press <Menu

When a notification appears:

View a text

message

and select Messages

messages Inbox

2. Select a message.

→

1. Press <View>.

(continued)

→

2. Select a message from the

Inbox.

From the Inbox:

1. In Idle mode, press <Menu

and select Messages My

messages Email box

2. Select Check new mail to

View an e-mail

1. In Idle mode, press <Menu

→

and select Messages

messages Inbox

2. Select a message.

→

retrieve an e-mail or a header.

3. Select an e-mail or a header.

4. If you selected a header, press

When a notification appears:

View a

multimedia

message

1. Press <View>.

Options> and select

Retrieve

2. Select a message from the

Inbox.

Use Bluetooth

1. Access an application.

2. From the item list, press

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

Options> and select Send

via Bluetooth

→

3. Select the item(s) you want and

press <Send>.

In Idle mode, press <Menu> and

select Settings Bluetooth

Activation On

Turn on

Bluetooth

→

4. Select a device.

→

5. If necessary, enter the

Bluetooth PIN and press <OK>.

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

→

Search new device

2. Select a device.

If necessary, press <Yes> to

confirm the reception.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

<OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Using ABC mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

T9, ABC, Number, and Symbol mode

You can enter text for some features such as

messaging, Phonebook, or Calendar, using T9, ABC ,

Number, and Symbol modes.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

Press the right soft key to change the text input mode.

Example: Writing a text message

T9 mode

ABC mode

Tips for using ABC mode

Number mode

Symbol mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

Text input mode

indicator

Options

•

Press [ ] to change case. Lower case (No

indicator), Initial capital ( ), and Capital lock (

are available.

3. When the word displays correctly, go to step 4.

Otherwise, press [ ] to display alternative word

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

Depending on your country, the [ ] may be not

)

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

available for scrolling alternative word choice.

Press [C] to delete characters one by one. Press

and hold [

] to clear the display.

4. Press [ ] to insert a space and enter the next

word.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

Entering a word in T9 mode

•

Press [ ] to insert a space.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

Press [ ] to change case. Lower case (No

indicator), Initial capital ( ), and Capital lock (

are available.

)

5], [5], and [6] to

•

Press [Left] or [Right] to move the cursor.

T9 predicts the word that you are typing, and it

may change with each key that you press.

Press [

] to delete characters one by one. Press

and hold [

C] to clear the display.

2. Enter the whole word before editing or deleting

characters.

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

2. Press [

Call functions

Advanced calling features

] to display alternative words for your key

presses. When there are no more alternative

words, Spell appears on the bottom line.

3. Press <Spell>.

Making a call

1. In Idle mode, enter the area code and phone

number.

4. Enter the word you want using ABC mode and

press <OK>.

2. Press [ ].

Using Number mode

Press

[

]

to clear the last digit or press and hold

Number mode enables you to enter numbers.

[C]

to clear the whole display. You can move the

Press the keys corresponding to the digits you want.

cursor to edit an incorrect digit.

Using Symbol mode

Symbol mode enables you to insert symbols.

Making an international call

1. In Idle mode, press and hold [

0]. The

character

appears.

Press

2. Enter the country code, area code, and phone

number, then press [ ].

display more symbols

select a symbol

[Up] or [Down].

the corresponding

number key.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

clear the entered symbol(s)

insert the symbol(s)

[C].

2. Scroll to the number you want and press [ ].

<OK>.

Making a call from Phonebook

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Phonebook.ꢀp. 31

Press <Accept> or [ ] to answer the call.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

Tips for answering a call

•

When Anykey answer in the Extra settings

menu is active, you can press any key, except for

keys.ꢀp. 34

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

<Reject>, [

], and [ ].ꢀp. 79

•

When Active folder in the Extra settings menu

is active, you can simply open the phone.

ꢀp. 79

2. Press [Left] or [Right] to scroll through other

numbers.

•

Press <Reject> or [ ] to reject a call.

Depending on the setting in the Side key menu,

press and hold [ ] to mute the call ringer or

reject a call. p. 79

3. Press <Dial> or [ ] to dial the number you want.

ꢀ

Ending a call

Close the phone or press [ ].

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

1. Press <View>.

2. If necessary, scroll through the missed calls.

Call functions

3. Press [ ] to dial the number you want.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Connect the headset to the jack on the left side of the

phone.

Making a second call

The button on the headset work as listed below:

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Press

redial the last call

answer a call

end a call

and hold the button twice.

the button.

4. Press <Options> and select End held call to end

the call on hold.

the button.

5. To end the current call, press [ ].

Options during a call

You can access a number of functions during a call.

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

Adjusting the volume during a call

activated the call waiting feature.

ꢀp. 83

Use [

] to adjust the earpiece volume during a call.

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Using the voice clarity feature

This feature increases the microphone’s sensitivity so

that the person with when you are speaking can hear

you clearly even though you may be whispering.

2. Press <Swap> to switch between the calls.

3. Press <Options> and select End held call to end

the call on hold.

Press <Options> and select Voice clarity on or

Voice clarity off

4. To end the current call, press [ ].

Switching off the microphone (Mute mode)

Transferring a call

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

You can transfer the currently active call to a caller on

hold, if your network supports it. With this option, the

two callers can talk to each other, but you are

disconnected from the call.

Press <Options> and select Mute or Unmute

Press <Options> and select Transfer

Sending a sequence of DTMF tones

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

Using a Bluetooth headset

Use an optional Bluetooth headset to talk on the

phone without holding the phone to your ear. To use

this feature, you first need to register your headset

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

and connect it to the phone.

Press <Options> and select Switch to headset or

Switch to phone

ꢀp. 85

Call functions

1. When connected with a teleservice system, press

Using SIM services

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

The SIM service menu is available if you use a SIM

card in your phone. A SIM card provides services such

as news, weather, sports, entertainment, and location

services.

Using Phonebook

You can access the Phonebook menu to locate or

For details, see your SIM card instructions or contact

your service provider.

store entries.ꢀp. 31

Press <Options> and select Phonebook

Making a multi-party call

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

Muting or sending key tones

You can turn the key tones off or on.

Your service provider must support multi-party calls

for you to use this feature.

Press <Options> and select Mute keys or Send

keys

Setting up a multi-party call

1. Call the first participant.

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

2. Call the second participant. The first call is

automatically put on hold.

3. Press <Options> and select Join. The first

participant is added to the multi-party call.

4. If desired, call another person or answer an

incoming call.

Menu functions

5. Press <Options> and select Join

All menu options listed

6. Repeat steps 4 and 5 as desired.

Having a private conversation with one

participant

Call records (Menu 1)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

1. Press <Options> and select Private

2. Select a name or number from the participant list.

You can talk privately with that person, while the

other participants converse with each other.

To access this menu, press <Menu> in Idle mode and

select Call records

3. To return to the multi-party call, press <Options

and select Join

Current contacts (Menu 1.1)

Disconnecting one participant

1. Press <Options> and select Remove

This menu displays the most recent calls dialled,

received, or missed.

2. Select a name or number from the participant list.

Accessing a call record

The participant is dropped from the call, but the

call continues with the other parties.

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll through the call list.

3. Close the phone or press [ ] to end the multi-

party call.

3. Press [

] to view the details of a call, or [ ] to

dial the number.

Menu functions

Using call record options

Received calls (Menu 1.4)

While viewing the call list, press <Options> to access

the following options:

This menu displays the most recent calls you have

received.

•

Details: show the details of the selected call.

Delete all (Menu 1.5)

Call: edit the selected number and dial the

number.

Use this menu to delete all of the records in each call

type.

•

Save as contacts: save the phone number to the

phone or SIM card memory.

1. Press [

] to check the call type(s) to be cleared.

•

Send message: send an SMS or MMS message.

2. Press <Delete>.

Delete: delete the selected call record or all call

records.

3. Press <Yes> to confirm the deletion.

Call time (Menu 1.6)

Missed calls (Menu 1.2)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

This menu displays the most recent calls that you did

not answer.

•

Last call time: check the length of your last call.

Dialled calls (Menu 1.3)

Total sent: check the total length of all the calls

you have dialled.

This menu displays the most recent calls you have

dialled.

•

Total received: check the total length of all the

calls you have received.

•

Reset timers: reset the call timers. You need to

enter the phone password.

Phonebook (Menu 2)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

The password is preset to 00000000. You can

change this password.

ꢀp. 88

Call costs (Menu 1.7)

To access this menu, press <Menu> in Idle mode and

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

select Phonebook

Contact list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

•

Last call cost: check the cost of your last call.

Press <Contacts> in Idle mode to quickly access

this menu.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

•

Max cost: check the maximum cost limit set in

Set max cost

2. Select the name you want from the list.

•

Reset counters: reset the cost counters.

3. Select a number and press [ ] to dial the

Set max cost: set the maximum cost authorised

for your calls.

number, or <Options> to access options.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

Menu functions

Using Phonebook options

FDN list (Menu 2.2)

While viewing the contact list or contact details, press

Use this menu to create a list of contacts to be used in

FDN (Fixed Dialling Number) mode, in which the

phone allows outgoing calls only to the specified

phone numbers, if your SIM card supports this

feature. You can activate FDN mode in the FDN mode

Options> to access the following options:

View: open details about the contact.

Edit: edit the contact information.

•

Send message: send an SMS or MMS message.

menu.ꢀp. 89

•

Add new contact: add a new contact to the

phone or SIM card memory.

Adding a contact

1. Press <Options> and select Add

•

Copy: copy the contact to the phone’s memory,

the SIM card, or the FDN (Fixed Dialling Number)

list.

2. Enter your PIN2 and press <OK>.

3. Enter a name and phone number, or press

<Options> and select Contact list to retrieve a

Send via: send the contact via SMS, MMS, e-mail,

contact from Phonebook.

or Bluetooth.

4. If necessary, change the location number.

5. Press <Save> to save the contact.

•

Delete: delete the selected contact or all contacts.

Language select: change the language to be

used.

Using contact options

•

Print via bluetooth: print the contact information

by connecting the phone to a printer via Bluetooth.

Scroll to a contact and press <Options> to access

options.ꢀ“Using Phonebook options”

Storing a number on the SIM card

1. Select SIM and enter a name.

Add new contact (Menu 2.3)

Use this menu to add a new contact to Phonebook.

2. Press [Down] and enter a phone number.

Storing a number in the phone’s memory

3. Press [Down] and change the location number, if

necessary.

1. Select Phone

2. Change the settings or enter information about the

contact.

If you select the Graphic ID Alert, Group

line, the contact must be saved to the phone’s

memory.

•

First name

Mobile Home

number in any category.

Last name: assign a name.

Office Fax Other: add a

4. Press [

] to save the contact.

•

Email: assign an e-mail address.

Group (Menu 2.4)

Graphic ID: assign an image as a caller ID

image to alert you to a call from the number.

Alert: assign a ringer melody to alert you to a

call from the number.

Use this menu to organise your contacts in caller

groups.

•

Creating a new caller group

1. Press <Options> and select Add

The settings specified in Graphic ID and Alert

are given priority over group settings.

2. Enter a name for the group.

•

Group: assign the number to a caller group.

Notes: add a memo about the person.

3. Select the Graphic ID line and select an image.

4. Select the Alert line and select a melody.

5. Press <Save> to save the group.

3. Press [

] to save the contact.

Menu functions

Adding members to a caller group

Speed dial (Menu 2.5)

1. Select a group.

Use this menu to assign a speed dial number (2 to 9)

for eight of your most frequently called numbers.

2. Press <Add>. The list of contacts stored in your

phone’s memory is displayed.

Assigning speed dial numbers

3. Select the contact you want to add to the selected

group.

1. Select a key location from

for your voicemail server.

9. Key

is reserved

4. To add more members, press <Options> and

2. Select the contact you want from the contact list.

select Add

→

a contact. Repeat this step as

3. If the contact has more than one number, select

the number you want.

desired.

Managing caller groups

Managing speed dial entries

While viewing the group list, press <Options> to

access the following options:

From the Speed dial screen, press <Options> to

access the following options:

•

View: display the members of the selected group.

Add: add a new group.

•

Add: assign a contact to an unassigned key.

View: show the contact assigned to the key.

Edit: change the properties of the selected group.

Change: assign a different contact to the assigned

key.

Send message: send an SMS, MMS, or e-mail

message to the member(s) you want.

•

Remove: clear the speed dial setting for the

selected key.

•

Delete: delete the selected group. Group

members, however, are not deleted from

Phonebook.

Dialling speed dial entries

•

Print via bluetooth: print the name card by

connecting the phone to a printer via Bluetooth.

Press and hold the appropriate key in Idle mode.

Own number (Menu 2.7)

My name card (Menu 2.6)

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

Use this menu to create a name card and send it to

other people.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a phone number in the

Management (Menu 2.8)

phone’s memory.ꢀp. 33

Use this menu to manage Phonebook.

Using name card options

•

Default saving: select a default memory location

to save contacts.

After saving your name card, press <Options> to

access the following options:

If you select Ask on saving, the phone will ask

you to select a memory location when saving a

number.

•

Edit: edit the name card.

Send via: send the name card via SMS, MMS,

e-mail, or Bluetooth.

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory.

•

Exchange namecard: exchange name cards with

another person via Bluetooth.

Sort by contacts: sort your contacts by the first

name or last name.

Remove: delete the name card.

Menu functions

•

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

Applications (Menu 3)

Use this menu to play Java games, to play music files,

to record voice memos, to set time zones and alarms,

or to use your phone as a calculator, converter, timer,

or stopwatch.

1. Press [

cleared.

] to check the location(s) to be

2. Press <Delete> and then <Yes>.

If you select FDN, you need to enter the PIN2.

To access this menu, press <Menu> in Idle mode and

3. Enter the phone password and press <OK>.

select Applications

The password is preset to 00000000. You

can change this password.ꢀp. 88

MP3 player (Menu 3.1)

Use this menu to enjoy music. First, you need to save

MP3 files in your phone’s memory.

•

Memory status: display the number of contacts

you have stored in Phonebook.

Downloading or receiving music files

Service number (Menu 2.9)

Use these methods to save MP3 files to your phone’s

memory:

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voicemail numbers.

•

Download from the wireless web

ꢀp. 43

Download from a computer using the Samsung PC

Studio program

ꢀ

Samsung PC Studio User’s

Guide

Scroll to the number you want and press <Dial> or

•

Via an active Bluetooth connectionꢀp. 87

[

The downloaded or received files are stored in the

Music folder. p. 64

Keys

Function

ꢀ

Pauses or resumes playback.

Creating a play list

Left

Goes back to the previous file. Moves

backward in a file when held down.

Add MP3 files to the play list.

1. From the MP3 player screen, press <Options

Right

Skips to the next file. Moves forward in a

file when held down.

and select Add to list

2. Select either of the following options:

Opens the play list.

•

Add all: add all of the files in the phone’s

memory to the play list.

Add a file: add specific files to the play list.

Down

Stops playback.

Adjusts the volume level.

Changes an equalizer type.

Changes the repeat mode

Changes an equalizer colour.

Turns shuffle mode on or off.

3. If you selected Add a file, press <Add> to add

the selected file.

4. Press <Back> to go back to the MP3 player

screen.

Playing music files

From the MP3 player screen, press [

During playback, use the following keys:

Using MP3 file options

From the MP3 player screen, press <Options> to

access the following options:

Menu functions

•

Play: play the selected file.

2. Press <Options> to access the following options:

•

Send via: send the selected file via e-mail or

Bluetooth.

•

Play: play the currently selected file.

Add to list: add files to the play list.

Move list: move the selected file to the

position you want within the play list.

Remove: delete the selected file or all files

from the play list.

•

Open play list: display the play list.

Set as: set the file as your ringtone, alarm tone,

or a caller alert melody for a Phonebook entry.

•

Delete: delete the selected file from the Music

folder as well as from the play list.

Voice recorder (Menu 3.2)

Settings: change the default settings for playing

music files.

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Repeat mode: select a repeat mode.

Recording a voice memo

Shuffle: set the MP3 player to play music in

random order.

1. Press [

] to start recording.

Visualization: select an equalizer setting.

Skin: select a skin type.

2. Speak into the microphone.

Press [

] to pause or resume the recording.

Volume: select a volume level.

Properties: access the file properties.

3. When you finish, press <Stop>. The voice memo

is saved automatically.

•

Accessing the play list

4. To

Press

1. From the MP3 player screen, press <Options

return to Record mode [Up].

and select Open play list to access the play list.

4. To

play back the voice

Press

Keys

Function

[

Returns to Record mode for a new

voice memo.

memo

access voice memo

options

<Options>.ꢀp. 65

Down

Stops playback.

Adjusts the volume.

return to the previous

menu level

<Back>.

Using voice memo options

From the Voice recorder screen, press <Options> to

access the following options:

Playing a voice memo

1. From the Voice recorder screen, press <Options

•

Record: record a new voice memo.

and select Go to voice list

Settings: configure the following settings for a

voice memo:

2. Select a voice memo. The memo plays.

During playback, use the following keys:

Recording time: select the recording time.

Volume: select the voice memo volume to be

used during playback.

Keys

Function

Pauses or resumes playback.

Moves backward.

Moves forward.

Default name: specify a default saving prefix for

the voice memo.

Left

•

Go to voice list: go to the list of the voice memos

you have recorded.

Right

Menu functions

The following settings are available:

Java world (Menu 3.3)

•

APN: enter the access point name.

Use this menu to access and play Java games and to

select a profile for accessing Java services.

Password: enter the password.

Using Java game options

Proxy: select whether or not you use a proxy

server to access network services. Depending on

this setting, options in Proxy settings vary.

From the Java world screen, select Downloads and

press <Options> to access the following options:

•

Launch: launch the selected game.

•

Proxy settings: provide you with the following

options:

Application settings: set a game to be continued

when a call comes in or an alarm sounds during

the game. You can also set the phone to exchange

game information with the network while playing

an online game or when you need to connect to

the Internet.

When the proxy is set to Enable

IP address: enter the HTTP proxy address.

Port: enter the port number.

When the proxy is set to Disable

•

Delete: delete the selected game except for

default games.

DNS1: enter the primary DNS address.

DNS2: enter the secondary DNS address.

Properties: access the game properties.

Checking memory status

Configuring Java settings

You can view the amount of total memory for the Java

games as well as the amount of used memory.

You can configure settings for accessing Java services.

From the Java world screen, select Settings

From the Java world screen, select Memory status

World time (Menu 3.4)

Alarm (Menu 3.5)

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Use this menu to set an alarm to ring at a specific

time.

Setting your local time zone

Setting an alarm

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

1. Select the type of alarm.

2. Press [Left] or [Right] to select On on the Alarm

line and press [Down].

3. Enter the time for the alarm to sound and press

[Down].

2. Press [

] to save the time zone.

Viewing and setting a foreign time zone

1. From the world map, press [Down].

4. Select AM or PM in 12-hour time format and press

[Down].

5. Select a repeat option.

2. Press [Left] or [Right] to select the foreign time

zone you want.

6. Select the Alarm tone line and select an alarm

melody.

3. Press [

] to save the time zone.

7. Press <Save> and then <Yes> to set the alarm.

Applying Daylight Savings Time

Stopping an alarm

1. From the world map, press <Options> and select

Set daylight saving time

2. Press [ ] to check the time zone(s) you want.

3. Press <Save>.

•

When an alarm sounds, press <OK> or any key.

When a wake-up call alarm sounds, press <OK> or

[

] to stop the alarm.

Menu functions

Otherwise, press <Snooze> or any key to stop

the alarm and cause it to sound again after 5

minutes. You can do this a maximum of five times.

3. Enter the second number.

4. Press [

] to view the result.

Converter (Menu 3.7)

Setting the alarm to ring even if the phone is

off

Use this menu for common conversions, such as

currency and temperature.

From the Alarm screen, select Auto power

→

On.

1. Select a converter.

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Calculator (Menu 3.6)

3. Enter the value to be converted and press [Down].

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

1. Enter the first number.

4. Press [Left] or [Right] to select the unit you want

to convert to.

Press the left soft key to insert a decimal point or

bracket.

The equivalent value for the amount you entered

displays.

To move the cursor, press [ ] or [ ].

2. Press the Navigation keys to access the math

function you want.

2. Press [

] to check an interval. You can repeat

Timer (Menu 3.8)

this step for a total of 4 intervals.

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

3. To reset the stopwatch, press <Reset>.

SIM AT (Menu 3.0)

Starting the timer

1. Press <Set>.

This menu is available if you use a SIM AT card that

provides additional services, such as news, weather,

sports, entertainment, and location services. Available

services may vary, depending on your service

provider’s plans.

2. Enter the length of time you want to count down

and press <OK>.

3. Press [

] to start counting down.

For details, see your SIM card instructions or contact

your service provider.

Stopping the timer

•

Press any key when the timer rings.

Press [

] on the Timer screen to stop the timer

before it rings.

Browser (Menu 4)

The web browser on your phone allows you to access

the wireless web. Using the web browser, you can

access up-to-date information and a wide variety of

media content, such as wallpapers, ringtones, and

music files.

Stopwatch (Menu 3.9)

Use this menu to measure elapsed time. The precision

of the stopwatch is one one-hundredth of a second.

The maximum measurement time is 10 hours.

1. Press [

] to start the stopwatch.

To access this menu, press <Menu> in Idle mode and

select Browser

Menu functions

•

Reload: reload the current page.

Home (Menu 4.1)

Show URL: display the URL address of the current

web page. You can also set the current page as the

homepage for the web browser or a bookmark.

Use this menu to connect your phone to the network

and load the home page of the wireless web service

provider. You can also press [

] in Idle mode.

•

About ...: view service and certificate information

of the web browser as well as version information.

Navigating with the web browser

Press

[Up] or [Down].

Using web page options

From any web page, press [ ] to access the following

options:

scroll through browser items

select a browser item

return to the previous page

return to the homepage

•

Go to URL: enter a URL address manually.

Back> or [C].

Bookmarks: switch to the Bookmarks menu.

and hold [C].

Messages: check the Inbox

box in the My messages menu. You can also

create and send a new SMS message. p. 47

File manager: switch to the File manager

menu. p. 63

Outbox, and Draft

ꢀ

Using browser menu options

•

Press [ ] or select

access the following options:

on the top of the screen to

ꢀ

•

Back: go back to the previous page.

Home: go back to the home page.

Exit: exit the web browser.

Exiting the web browser

Press [ ] to exit the browser.

Bookmarks (Menu 4.2)

Clear cache (Menu 4.4)

Use this menu to save URL addresses in order to

quickly access websites.

Use this menu to clear the cache, a temporary

memory that stores recently accessed web pages.

Adding a bookmark

1. Select an empty location.

Profile settings (Menu 4.5)

Use this menu to set up servers for the web browser.

Contact your service provider for details about your

settings options.

2. Enter a name for the bookmark and press [Down].

3. Enter a URL address and press [

For each server, the following options are available:

Accessing a bookmarked page

•

Profile name: assign a name to the server profile.

Scroll to a bookmark item and press [

Home URL: set the address of your homepage.

Using bookmark options

Bearer: select a bearer for each type of network

address accessed.

After saving an item, press <Options> to access the

following options:

•

Proxy: select whether or not the phone uses a

proxy server to launch the web browser. Your

service provider can tell you if your network

requires a proxy server, and they can give you the

appropriate settings.

•

Go: access the bookmarked website.

Edit: edit the name and address of the bookmark.

Delete: delete the selected bookmark.

Go to URL (Menu 4.3)

Use this menu to manually enter the URL address of a

website and access the website.

Menu functions

•

GPRS settings: customise the following GPRS

network settings:

Proxy port: enter the port number.

Dial number: enter the PPP server phone number.

When the proxy is set to Enable

Proxy IP: enter the web gateway address.

Password: enter the password.

Proxy port: enter the port number.

Data call type: select a data call type.

APN: enter the access point name of the GPRS

network gateway.

When the proxy is set to Disable

DNS1: enter the primary address.

DNS2: enter the secondary address.

Dial number: enter the PPP server phone number.

Password: enter the password.

When the proxy is set to Disable

DNS1: enter the primary address.

Password: enter the password.

DNS2: enter the secondary address

Data call type: select a data call type.

APN: enter the access point name of the GPRS

network gateway.

Current profile (Menu 4.6)

Use this menu to select a connection profile for

accessing the web browser.

Password: enter the password

•

GSM settings: customise the following GSM

network settings:

When the proxy is set to Enable

Proxy IP: enter the web gateway address.

1. Enter your message.

Messages (Menu 5)

2. Press <Options> to access one of the following

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use the web push message and cell broadcast

message features.

options:

•

Save and send: both save a copy of the

message and send the message.

Send only: send the message.

Insert: add a template, Phonebook entry, or

bookmark.

•

To access this menu, press <Menu> in Idle mode and

select Messages

•

Add picture/Add animation/Add melody:

Create new message (Menu 5.1)

attach a picture, animated image, or melody.

Attach: attach a name card or calender data

as a data format attachment.

Save to: save the message in the Draft or My

folder box.

Language select: change the language used

in the text input mode.

Text style: change the text attributes.

Use this menu to create and send SMS, MMS, or

e-mail messages.

Text message (Menu 5.1.1)

Short Message Service (SMS) allows you to send or

receive text messages that may include pictures,

animated images, and melodies.

The maximum number of characters allowed in a

text message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

3. When you have finished, press <Options> and

select Save and send or Send only

4. Enter a destination number.

Menu functions

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

8. Press <Options> to access the following options:

Depending on the field status or selected field,

available options vary.

5. Press [

] to send the message.

•

Edit: edit the subject or text of your message.

Add image Add video Add sound: add a

photo, video, or sound. Depending on the file

type or DRM(Digital Rights Management)

system, some files may not be able to be

forwarded.

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

1. Select the Subject line.

•

Change image

sound: change an added item.

/Change video/Change

2. Enter the message subject and press [

3. Select the Picture & Video or Sound line.

4. Select a file category.

•

Preview: view the message you have created.

Send: send the message.

Save to: save the message in the Draft or My

folder box. You can also save the message as

an MMS template.

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

5. Select an image, a video, or a sound file and press

<Add>.

The maximum size allowed for an MMS message

can differ depending on the country. If you

cannot attach another file, add another page.

•

6. Select the Message line.

Delete page: delete an added page.

7. Enter the message text and press [

•

Edit page: change the duration of page display

or move the page forward.

Attach: attach a name card or calender data

as a data format attachment.

2. Enter the subject of your e-mail and press [

3. Select the Message line.

4. Enter the e-mail text and press [

5. Select the File attach line.

Remove subject

/Remove message: delete

6. Press <Options> and add media files to your

the subject or text.

Remove media/Remove sound: delete an

added item.

e-mail by using the following options:

•

Add image/Add videos/Add sounds/Add

music: add images, videos, sounds, or music

files. Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

9. When you have finished, press <Options> and

select Send

10. Enter a phone number or an e-mail address.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

•

Other files: add files in unsupported format.

Attach: add name cards or calendar data.

7. While composing the e-mail, press <Options> to

11. Press [

] to send the message.

access the following options:

Email (Menu 5.1.3)

•

Edit: edit the subject or text of your e-mail.

View: open the attached file.

Send: send the e-mail.

Save to: save the e-mail in the Draft or My

folder box.

You can send e-mails that include text and media files,

such as images, videos, and audio. To use this feature,

you need to subscribe to an e-mail service and set up

your e-mail account and profile.

ꢀp. 60, 61

1. Select the Subject line.

Menu functions

•

Remove subject

the subject or text.

Remove: delete the selected attachment or all

attachments.

Remove all attachments: delete all

attachments.

Remove message: delete

Viewing a message

The following icons may appear on the message list;

depending on the message type or status, icons may

vary:

•

SMS

MMS

8. When you finish, press <Options> and select

Send

MMS notification

Web push messages

9. Enter an e-mail address.

Delivery report for your sent messages

• Depending on the DRM (Digital Right

Management, you may not be able to forward

some messages. They are indicated by the

icon.

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

10. Press [

] to send the e-mail.

• An ! icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

My messages (Menu 5.2)

Use this menu to store all of the messages you have

received, sent, failed to send, or saved to sent it later.

While viewing the message list, press <Options> to

access the following options:

Inbox (Menu 5.2.1)

This folder stores all of the messages you have

received, except for e-mails and CB messages.

•

View: open the message.

Retrieve: retrieve the MMS message from the

server.

•

Delete: delete the message or all messages.

•

Move to phone/Move to SIM: move the SMS

message between the SIM card and the phone’s

memory.

Move to my folder: move the message to the My

folder box.

•

Add to block list: add the sender’s number to the

Block number list.

•

Move to phone/Move to SIM: move the SMS

message between the SIM card and the phone’s

memory.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Sort by: change the sort order of the messages.

Cut media: save media content from the message

into your phone’s memory.

Protection: protect the message from being

deleted.

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

•

Properties: access the message properties.

Using message options

While viewing a message, press <Options> to access

the following options:

•

Print via bluetooth: print the message by

connecting the phone to a printer via Bluetooth.

SMS messages

MMS messages

•

Reply via: send a reply message via SMS or MMS.

Forward: forward the message to other people.

Delete: delete the message.

•

Reply via SMS: send a reply message via SMS.

Reply via MMS to: send a reply message via

MMS.

•

Forward: forward the message to other people.

Delete: delete the message or all messages.

Menu functions

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

While viewing the message list, press <Options> to

access the following options:

•

Cut media: save media content from the message

into your phone’s memory.

•

View: open the message.

Edit: edit the message.

•

Properties: access the message properties.

Send: send the message.

Web push messages

Delete: delete the message or all messages.

•

Go to URL: connect to the URL specified in the

message.

Move to my folder: move the message to the My

folder box.

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

•

Move to phone/Move to SIM: move the SMS

message between the SIM card and the phone’s

memory.

Delete: delete the message.

•

Sort by: change the sort order of the messages.

Delivery report messages

Protection: protect the message from being

deleted.

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

•

Properties: access the message properties.

•

Delete: delete the message.

Protection: protect the message from being

deleted.

Outbox (Menu 5.2.3)

This folder stores messages that the phone is

attempting to send or has failed to send.

Draft (Menu 5.2.2)

In this folder, the following icons are available:

This folder stores messages you have saved to send at

a later time.

•

Message that the phone is sending

•

Message that the phone has failed to send

While viewing a message or from the message list,

press <Options> to access the following options:

While viewing the message list, press <Options> to

access the following options:

•

View: open the message.

Forward: forward the message to other people.

Delete: delete the message or all messages.

•

Cancel sending: cancel sending the message.

View: open the message.

Move to my folder: move the message to the My

folder box.

Send/Send again: send the message.

Edit: edit the message.

•

Move to phone/Move to SIM: move the SMS

message between the SIM card and the phone’s

memory.

Delete: delete the message or all messages.

Move to my folder: move the message to the My

folder box.

•

Sort by: change the sort order of the messages.

•

Move to phone/Move to SIM: move the SMS

message between the SIM card and the phone’s

memory.

Print via bluetooth: print the message by

connecting the phone to a printer via Bluetooth.

•

Protection: protect the message from being

deleted.

•

Sort by: change the sort order of the messages.

Protection: protect the message from being

deleted.

Properties: access the message properties.

Email box (Menu 5.2.5)

•

Properties: access the message properties.

This folder stores e-mails that you have received.

1. Select an e-mail account.

Sentbox (Menu 5.2.4)

This folder stores messages that you have sent.

Menu functions

2. Press <Yes> when Check new mail is displayed

Press [ ] or [ ] to move to the previous or next

e-mail.

to get new mails from the server.

The phone checks for new e-mails and retrieves

received e-mails.

While viewing the e-mail content or message list,

press <Options> to access the following options:

The following icons may appear on the message

list; depending on the e-mail status, icons may

vary:

Options may vary depending on the status of the

e-mail.

•

View: open the selected item.

•

has been read

has not been read

has been retrieved from the server

has not been retrieved

Retrieve: retrieve one or all e-mails from the

e-mail server.

•

Reply to: send a reply to the sender or to all of

the other recipients.

icon next to a message means that a

•

Forward: forward the e-mail to other people.

Mark as read: mark the e-mail as read.

Delete selection: delete the selected e-mail.

Delete all: delete all e-mails.

message is of high priority. A grey-coloured

message icon is of low priority.

3. Scroll to an e-mail or header and press [

4. If the e-mail has more than one page, press [

to scroll through pages one by one.

]

Move to my folder: move the e-mail to the My

folder box.

Press and hold [

page.

] to move to the first or last

•

Sort by: sort the e-mails by size, subject, data, or

senders’ e-mail addresses.

5. Select an attached file to view or play it.

•

Protection: protect the e-mail from being deleted.

•

Print via bluetooth: print the selected e-mail by

connecting the phone to a printer via Bluetooth.

Properties: access the e-mail properties.

•

Protection: protect the e-mail from being deleted.

While viewing a header or e-mail, press <Options> to

access the following options:

Properties: access the e-mail properties.

•

Retrieve: retrieve one or all e-mails.

My folder (Menu 5.2.6)

Open file: open the attached file.

Use this menu to store and manage your messages.

Save file: save the attached file in your phone’s

memory.

While viewing the message list, press <Options> to

access the following options:

•

Reply to: send a reply to the sender or to the

sender and all of the recipients.

•

View: open the selected message.

Edit: edit the message.

•

Forward: forward the e-mail to other people.

Delete: delete the e-mail.

Send: send the message.

Delete: delete the selected message or all

messages.

Add to block list: add the sender’s e-mail

address or the e-mail subject to Block list

•

Sort by: change the sort order of messages.

•

Cut address: extract e-mail addresses, URLs, and

phone numbers.

Protection: protect the message from being

deleted.

Cut attachment: save the selected attachment or

all attachments from the e-mail into your phone’s

memory.

•

Properties: access the message properties.

Menu functions

While viewing a template or the template list, press

Templates (Menu 5.3)

•

Options> to access the following options:

Replay: replay the template.

View: display the template.

Use this menu to create, edit, and send SMS or MMS

templates.

Text template (Menu 5.3.1)

Send: send the template.

Use this menu to preset frequently used text

messages.

Edit: edit the template.

Add new: add a new template.

Delete: delete the template or all templates.

1. Select an empty location.

2. Enter a message and press [

3. Press <Options> to access the following options:

Delete all (Menu 5.4)

•

Edit: edit the template.

Send message: send an SMS, MMS, or e-mail

message using the template.

Use this menu to delete messages in each message

folder one by one, or all at once. You can also delete

all messages in all folders at one time.

•

Delete: delete the template.

Settings (Menu 5.5)

MMS template (Menu 5.3.2)

Use this menu to set up various options for using the

messaging service.

Use this menu to store up to 11 preset MMS

messages. You can create a new MMS template and

send the template.

Text message (Menu 5.5.1)

Scroll to an MMS template and press [

the template.

] to display

You can configure default SMS settings for sending

messages.

Send settings: set up the following options for

sending a text message.

Send settings: set up the following options for

sending a multimedia message:

•

Reply path: allow the recipient to reply to you

through your message centre.

•

Delivery report: set the network to inform you

when your message has been delivered.

Delivery report: set the network to inform you

when your message has been delivered.

Address hiding: set your address to be hidden

from the recipient’s phone.

Validity period: set the length of time your

messages are stored in the SMS centre while

attempts are made to deliver them.

Read reply: determine whether or not the phone

sends a read-reply request.

•

Priority: set the priority level of your messages.

•

Message type: set the default message type. The

network can convert the messages into the

selected format.

Expiry date: set the length of time your messages

are stored in the message centre.

•

Delivery after: set a time delay before messages

are sent.

Service centre: store or change the number of

your message centre.

Send size: select maximum size of attached items

Block number: specify phone numbers from which

messages will not be accepted. Numbers specified

here are also included in the MMS blocking list.

allowed for an MMS message.

Receive settings: set up the following options for

receiving a multimedia message:

Multimedia message (Menu 5.5.2)

•

Anonymous reject: reject messages from

anonymous senders.

You can configure default MMS settings for sending or

receiving messages.

•

Advert allowed: accept advertisements.

Menu functions

•

Report allowed: send a delivery report from the

network to the sender.

•

Current profile: select a profile.

Profile settings: customise the following options

•

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

for each profile:

Profile name: assign a name to the MMS profile.

Server URL: enter the address of your MMS

server.

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Proxy: connect to the GPRS network using the

proxy server.

Home reception and Roaming reception have the

following options:

GPRS settings: customise the settings required

for connecting to the GPRS network.

Manual: the phone displays notifications. Use the

Retrieve option to manually download new

messages.

IP address: (when the proxy is set to Enable)

enter the gateway address.

Port: (when the proxy is set to Enable) enter

the port number.

Automatic: the phone automatically retrieves

messages from the server.

DNS1: (when the proxy is set to Disable) enter

the primary address.

Reject: the phone rejects all messages.

MMS profiles: configure required network settings for

MMS. The last profile accessed is automatically

activated for sending or receiving subsequent

messages.

DNS2: (when the proxy is set to Disable) enter

the secondary address.

APN: enter the access point name used for the

address of the GPRS network.

Check with your service provider before you change

any MMS settings on your phone.

Password: enter the password.

•

Delivery confirm: set the network to inform you

when your e-mail has been delivered.

Version: select an available OMA version and

maximum size limit for sending or receiving

messages.

Read confirm: send a request for a reply along

with your e-mail.

•

Priority: select the priority level of your e-mail.

Depending on your service provider, it may not

be possible to support the maximum limit

295KB. In this case, try again after changing

the setting to 100KB.

Include signature: attach your name, phone

number, a simple memo, or tag line to your e-mail

using the Edit name

Edit telephone number

and Edit note options.

Block number: specify phone numbers from which

messages will not be accepted. Numbers specified

here are also included in the SMS blocking list.

•

Edit name: enter your name.

Edit telephone number: enter your phone

number.

Email (Menu 5.5.3)

•

Edit note: enter a simple memo.

You can configure default network settings that are

required to send or receive e-mails.

Receive settings: set up the following options for

receiving e-mails:

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

•

Check interval: determine how often the phone

checks the server for incoming e-mails.

If you set this option to Not used, you can use the

Check new mail feature to check your e-mail

manually.

Send settings: set up the following options for

sending e-mails:

•

Send copy to self: send a copy of your e-mail to

your own e-mail address.

Menu functions

•

Read reply: determine whether or not the phone

sends a read-reply request.

•

Current account: select an account.

Account settings: configure up to five e-mail

When this option is set to Announce, the phone

reminds you to send a read-reply request with

your e-mail address.

accounts using different e-mail servers.

The following options are available for each

account:

•

Retrieve option: determine whether the phone

retrieves headers only or the entire e-mail.

In use: select this option to use the account and

to display the account in Email box

Delete option: determine whether e-mails are

deleted immediately or the next time you connect

to the server.

Account name: enter a name for the currently

selected account.

User name: enter a name to be displayed as the

sender’s name in your outgoing e-mails.

•

Reject if over: determine the maximum size for

incoming e-mails. Your phone will reject e-mails

that exceed the specified size.

Email address: enter your e-mail address.

Reply address: enter an e-mail address to which

you want recipients to send replay messages.

Leave a copy of messages on the server: leave

copies of e-mails after retrieving.

User ID: enter your e-mail ID.

Email account: set up your e-mail account(s) and

select the one to be used:

Password: enter your e-mail password.

SMTP server: enter the IP address or domain

name of the outgoing e-mail server.

You cannot change e-mail account settings while an

e-mail is being sent or retrieved. Your e-mail

service provider can give you the information

needed for the below settings.

SMTP port: enter the SMTP port number.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

•

Current profile: select a profile.

Profile settings: configure up to 5 e-mail profiles.

For each profile, the following options are required

to connect to the GPRS network:

When the protocol type is POP3

POP3 server: enter the IP address or domain

Profile name: enter a name for the e-mail profile.

name of the server that receives your e-mail.

APN: enter the access point name used for the

POP3 port: enter the POP3 port number.

GPRS network address.

APOP login: connect to the server by using the

APOP login scheme when this option is selected.

Password: enter the password.

DNS1: enter the primary address.

DNS2: enter the secondary address.

When the protocol type is IMAP4

IMAP4 server: enter the IP address or domain

name of the server that receives your e-mail.

Block list: specify e-mail addresses from which

e-mails will not be accepted. You can also specify

e-mail subjects that you will not accept.

IMAP4 port: enter the IMAP4 port number.

Include attachments: select this option to

receive attachments with e-mails.

Push message (Menu 5.5.4)

Max. Emails retrieved: set the number of

e-mails you will retrieve from the server.

You can change the settings for receiving web push

messages from the wireless web server.

Email profile: configure the network settings

required to send or receive e-mails.

The following options are available:

•

Receive: set how your phone receives web push

messages.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

Menu functions

•

Service centre: specify the address of the server

from which you want to receive web push

messages, the Receive option is set to SMS-C

•

Channel: specify the channels from which you

receive broadcast messages.

When you select Respective channels, you can

set up a list of active CB channels.

specific

Language: select the language(s) in which

broadcast messages display.

Broadcast messages (Menu 5.6)

The Cell Broadcast service delivers short messages on

various topics such as the weather or traffic.

Please contact your service provider for details.

Use this menu to change the settings for the service

and to access broadcast messages.

Memory status (Menu 5.7)

Use this menu to view the maximum memory and

available memory for each message type. You can also

view the memory currently in use in each folder.

•

Read: open received messages.

The Temporary box saves network messages until

the phone is switched off.

The Archive box saves network messages

indefinitely. Press <Options> and select Save to

save messages to the Archive box when a text

notification appears.

•

Receive: enable or disable the reception of

broadcast messages.

Videos (Menu 6.2)

File manager (Menu 6)

This menu displays video clips you have recorded,

downloaded, or received in messages.

The File manager menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

To access this menu, press <Menu> in Idle mode and

select File manager

Playing a video clip

According to the DRM (Digital Rights Management)

system, web content may not be able to be

1. Select a video folder.

2. Scroll to a clip and press [

ꢀp. 77

forwarded. The content is indicated by the

icon.

Using video options

While viewing the video list, press <Options> to

access the options.

Images (Menu 6.1)

This menu displays photos you have taken and images

downloaded or received in messages.

•

Play: play the video clip.

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Viewing an image

1. Select an image folder.

•

Delete: delete the selected video clip or all video

clips.

2. Scroll to an image and press [

Using image options

•

Rename: change the name of the video clip.

Move to favourite videos: go to the Favourite

videos folder.

While viewing an image or the image list, press

Options> to access the options. p. 73

ꢀ

Menu functions

•

Share for Bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

•

Add play list: add a file to the play list.

Set as: set the file as your ringtone, alarm tone,

or a caller alert melody for a Phonebook entry.

•

Protection: protect the video clip from being

deleted.

•

Delete: delete the selected file or all files.

Settings: change the default settings for playing

Properties: access the properties of the video

clip.

music files.

ꢀp. 38

•

Rename: change the name of the file.

Share for Bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

Music (Menu 6.3)

This menu displays MP3 files you have downloaded,

received in messages, or imported from your

computer.

•

Protection: protect the file from being deleted.

Properties: access the file properties.

Playing a music file

Scroll to a file and press [

].ꢀp. 37

Sounds (Menu 6.4)

Using music options

This menu displays sound files you have recorded,

downloaded, or received in messages.

While viewing the music list, press <Options> to

access the following options:

Playing a sound clip

1. Select a sound folder.

•

Play: play the files on the play list.

Send via: send the file via e-mail or Bluetooth.

2. Scroll to a clip and press [

Using sound options

Other files (Menu 6.5)

While viewing the sound list, press <Options> to

access the following options:

Files that you have received but which are not

supported by your phone are stored in this folder. You

cannot open these files on the phone. Unsupported file

formats include *.doc, *.ppt, and *.txt.

•

Play: play the sound file.

Send via: send the file via MMS, e-mail, or

Bluetooth.

While viewing the file list, press <Options> to access

the following options:

•

Set as: set the file as your ringtone, alarm tone,

or a caller alert melody for a Phonebook entry.

•

Send via: send the file via e-mail or Bluetooth.

Delete: delete the selected file or all files.

Rename: change the name of the file.

•

Delete: delete the selected file or all files.

Rename: change the name of the file.

Move to favourite sounds: move the file to the

Favourite sounds folder.

Share for Bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

•

Share for Bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

•

Protection: protect the file from being deleted.

Properties: access the file properties.

•

Protection: protect the file from being deleted.

Memory status (Menu 6.6)

Properties: access the file properties.

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

Menu functions

•

Create: add a new event.

Calendar (Menu 7)

The calendar feature enables you to keep track of your

schedule and to-do list, to view missed alarm events,

and to make a memo.

Go to: go to the current date or enter a specific

date.

•

Sort by: sort items by the type of event.

Delete: delete item(s) stored on the calendar by

using various deleting options.

To access this menu, press <Menu> in Idle mode and

select Calendar

•

Missed alarm events: view events whose alarms

you have missed.

Consulting the calendar

Memory status: view the memory status for

items stored in the phone’s memory.

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

Creating an event

The number of events for the specific day appears at

the bottom of the calendar. The following icons

indicate the type of event:

You can schedule up to 400 events on the calendar,

and schedule more than one event per day.

Entering a new scheduled event

1. Scroll to a date on the calendar.

•

Scheduled event

To-do item

•

Anniversary

Miscellaneous

2. Press <Options> and select Create

→

Schedule.

Press <Options> to access the following options:

3. Enter information or change the settings in the

following entry fields:

•

View mode: change the view mode of the

calendar.

•

Subject: enter the event title.

•

Details: enter event details.

Start date and Start time: enter the starting

date and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Location: enter information about the event

location.

Alarm: set an alarm for the event.

before: set how long before the event the

alarm is to alert you.

Alarm tone: select an alarm tone.

Repeat: select to set the event to recur and a

repeat unit.

until: if the event will recur, set the ending

date.

Entering a new anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

→

•

Anniversary

3. Enter information or change the settings in the

following entry fields:

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

•

before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

sound.

AM/PM: select AM or PM in 12-hour time

format.

•

Alarm tone: select an alarm tone.

Repeat every year: select to set the phone to

remind you of the anniversary every year.

4. Press <Save> to save the event.

Menu functions

Entering a new Miscellaneous

1. Select a date on the calendar.

2. Press <Options> and select Create

Entering a to-do item

1. Select a date on the calendar.

2. Press <Options> and select Create

→

To do.

Miscellaneous

3. Enter information or change the settings in the

following entry fields:

3. Enter information or change the settings in the

following entry fields:

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

Priority: select a priority level.

•

Subject: enter the title of the event.

Details: enter event details.

Start date and End date: enter the starting

and ending dates for the event.

Start time and End time: enter the starting

and ending times for the event.

AM/PM: select AM or PM in 12-hour time

format.

4. Press <Save> to save the event.

•

Viewing an event

Square brackets on a calendar date indicate the

events scheduled for that day:

•

Alarm: set an alarm for the event.

before: set the time for the alarm.

Alarm tone: select an alarm tone.

•

Blue: Scheduled event • Orange: Anniversary

Red: To-do item Green: Miscellaneous

•

4. Press <Save> to save the event.

1. Select a date on the calendar to display the events

for the day.

2. Select an event to view its details.

While viewing an event or the event list, press

Viewing an event in different mode

Options> to access the following options:

View: display the event details.

Edit: edit the event.

By default, the calendar appears in Month view mode.

•

Press <Options> and select View mode to change

the mode.

•

Create: add a new event.

Day view

•

Send via: send the event via SMS, MMS,

e-mail, or Bluetooth.

You can view events for the selected date.

Select an event to view its details.

•

View mode: change the view mode of the

calendar.

The following icons will be displayed according to the

event’s type and status:

Done/Undone: display the event with a check

mark, if the event has been done.

•

Alarm set

Recurring event

Completed to-do item

•

Sort by: sort items by the type of event.

Delete: delete item(s) stored on the calendar by

using various deleting options.

To-do priority; its colour indicates the priority

level (Red: high, Blue: normal, and Grey: low)

•

Print via bluetooth: print the event by

connecting the phone to a printer via Bluetooth.

Week view

You can view events (only for items stored for

Miscellaneous) for the selected week.

Missed alarm events: view events whose alarms

you have missed.

Memory status: view the memory status for

items stored in the phone’s memory.

A cell on the timetable indicates the presence of event

information. Select the cell that contains the event you

want.

Menu functions

Viewing a missed alarm event

Camera (Menu 8)

When you are unable to acknowledge an alarm, the

phone displays a missed alarm notification.

You can use the camera module embedded in your

phone to take photos and record videos.

•

Press <View> to view the corresponding event.

Press <Exit

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

Accessing missed alarm events

1. Press <Options> and select Missed alarm

events

2. Select an event.

Using missed alarm options

From the event list, press <Options> to access the

following options:

Taking a photo

•

View: display the event details.

Delete: delete the event.

You can take photos in various modes using the

phone. The camera produces JPEG photos.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

Delete all: delete all events.

Taking a photo with the phone open

1. Access the Camera menu to turn on the camera.

The image to be captured appears on the display.

2. Adjust the image by aiming the camera lens at the

subject.

Single shot: take a photo in normal mode.

Multi shot: take a series of action stills. Select the

•

Press the left soft key to access camera

options. See the next section.

Use the keypad to change the camera settings

number of photos the camera will take.

Mosaic shot: take several stills and save them in

one frame. Select the number of still images the

camera will take.

•

or switch to other modes.

3. Press [ to take a photo. The photo is saved in

the Photos folder.

4. To

ꢀp. 72

]

•

Effects: change the colour tone or apply a special

effect to photos to be taken.

Frames: apply a decorative frame to photos to be

taken.

Press

use photo options

delete the photo

[

Options>.ꢀp. 73

•

Flash: determine the flash use.

Delete> and then <Yes>.

Timer: set a time delay before the camera takes a

photo.

return to Capture

mode

•

Go to photos: go to the Photos folder.

Settings: change the default settings for taking a

photo.

Using camera options in Capture mode

In Capture mode, press the left soft key to access the

following options:

Size: select an image size.

Quality: select an image quality setting.

View finder: select a preview screen.

•

Record video: switch to Record mode.

Shooting mode: take a photo in the following

modes:

Menu functions

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light situations,

lower the ISO number to increase the quality.

•

Camera short cuts: view the functions of the

keys you can use.

Using the keypad in Capture mode

The higher the ISO number, the faster the camera

shutter functions and the more sensitive the

camera is to light. Higher ISO settings may bring

some distortion to an image.

You can use the keypad to customise your camera

settings in Capture mode.

Key

Function

Spot focus: adjust the exposure based on a

specific area of the image. Select On to display the

spot focus frame in the middle of the image, and

change the exposure according to the brightness of

the image fragment in the frame.

Flips the image vertically.

Shows the mirror image.

Left/Right Adjusts the brightness of the image.

Up/Down Zooms in or out.

Shutter sound: select the sound that you hear

when you press the shutter release, [

Switches to Record mode.

ꢀp. 74

Zoom sound: turn on or off the sound that you

hear when zooming in or out.

Changes the image size.

Changes the image quality.

Changes the camera mode.

Brightness sound: turn on or off the sound that

you hear when adjusting the image brightness.

Default name: change the default prefix of the

photo name.

Changes the colour tone or applies a

special effect to a photo.

•

Delete: delete the photo.

Key

Function

Rename: change the name of the photo.

Go to photos: go to the Photos folder.

Reduces the distortion on the image to

maximise detail and sharpness.

Share for Bluetooth: set whether or not to

prevent the photo from being accessed from other

Bluetooth devices.

Selects a decorative frame.

Sets the timer.

•

Print via bluetooth: print the photo by

connecting the phone to a printer via Bluetooth.

Goes to the Photos folder.

Determines the flash use.

Changes the preview screen.

•

Protection: protect the photo from being deleted.

Properties: access the photo properties.

Viewing a photo

1. In Capture mode, press the left soft key and select

Using photo options

After taking a photo, press <Options> to access the

following options:

Go to photos

2. Scroll to a photo and press [

While viewing a photo or the photo list, press

•

Take another: return to Capture mode to take

another photo.

Options> to access the following options:

List: return the screen to the photo list.

View: view the photo on the full screen.

Send via: send the photo via MMS, e-mail, or

Bluetooth.

•

Set as: set the photo as your wallpaper for the

displays or as a caller ID image for a Phonebook

entry.

•

Send via: send the photo via MMS, e-mail, or

Bluetooth.

Menu functions

•

Set as: set the photo as your wallpaper for the

displays or as a caller ID image for a Phonebook

entry.

1. Press and hold [

2. Adjust the image by aiming the camera lens at the

subject.

•

Edit: decorate the photo by adding emoticons or

applying a frame or special effect.

3. To flip the image vertically, press [ ].

To show the mirror image, press [ ].

•

Delete: delete the photo.

4. Press [

]

to take a photo. The photo is

Rename: change the name of the photo.

automatically saved in the Photos folder.

Move to favourite images: move the photo to

Recording a video

the Favourite images folder.

•

Slide show: display all photos in turn as a slide

show. Select the length of time for which each

photo is displayed.

You can record a video of what is displayed on the

camera screen and save it.

1. In Capture mode, press [1].

Share for Bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

2. Aim the camera lens at the subject to adjust the

image.

•

Press the left soft key to access camera

options. See the next section.

Print via bluetooth: print the photo by

connecting the phone to a printer via Bluetooth.

•

Use the keypad to change the camera settings

or switch to other modes. See the next page.

•

Protection: protect the photo from being deleted.

Properties: access the photo properties.

3. Press [

]

to start recording.

Taking a photo with the phone closed

4. Press [

]

or the right soft key to stop recording.

•

Go to videos: go to the Video folder.

The video is automatically saved in the Video

folder.

Settings: change the following settings for

recording a video:

Recording mode: select a video recording mode.

5. To

Press

Select Limit of MMS to record a video suitable for

an MMS message. The video clip is saved in 3GP

format.

play back the video clip

use video options

[

the left soft key.

ꢀp. 76

delete the video clip

return to Record mode

[

] and then <Yes>.

Select Normal to record a video within the limit of

the currently available memory.

the right soft key.

Size: select a frame size.

Quality: select an image quality setting.

Audio rec.: record audio with a video clip.

Using camera options in Record mode

In Record mode, press the left soft key to access the

following options:

Zoom sound: turn on or off the sound that you

hear when zooming in or out.

•

Take a photo: switch to Capture mode.

Brightness sound: turn on or off the sound that

you hear when adjusting the image brightness.

Effects: change the colour tone or apply a special

effect to a video.

Default name: change the default prefix of the

video clip name.

•

Flash: determine the flash use.

Timer: set a time delay before the camera starts

recording.

•

Camcorder short cuts: view the functions of the

keys you can use.

Menu functions

Using the keypad in Record mode

Keys

Function

You can use the keypad to customise your camera

settings in Record mode:

Sets the timer.

Goes to the Videos folder.

Determines the flash use.

Keys

Function

Flips the image vertically.

Shows the mirror image.

Using video options

After recording a video clip, press the left soft key to

access the following options:

Left/Right Adjusts the brightness of the image.

Up/Down Zooms in or out.

•

Record another: return to Record mode to record

another video clip.

Switches to Capture mode.

Changes the image size.

ꢀp. 70

•

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Changes the image quality.

•

Delete: delete the video clip.

Changes the video recording mode.

Rename: change the name of the video clip.

Go to videos: go to the Videos folder.

Changes the colour tone or applies a

special effect to the video image.

Protection: protect the video clip from being

deleted.

Reduces the distortion on the image to

maximise detail and sharpness.

•

Properties: access the properties of the video

clip.

Mutes or unmutes the audio.

Playing a video clip

1. In Record mode, press the left soft key and select

•

Delete: delete the video clip.

Rename: change the name of the video clip.

Move to favourite videos: move the video

clip to the Favourite videos folder.

Share for Bluetooth: set whether or not to

prevent this file from being accessed from

other Bluetooth devices.

Protection: protect the video clip from being

deleted.

Properties: access the properties of the video

clip.

Go to videos

2. Scroll to a video clip and press [

•

During playback, use the following buttons on the

display:

Keys

Function

•

Pauses/resumes playback.

Skips backward in a file.

Skips forward in a file.

Stops playback.

Left

Right

Down

Adjusts the volume.

After playing back the video clip, press the left soft key

to access the following options:

•

Play: begin the playback.

Send via: send the video clip via MMS, e-mail,

or Bluetooth.

Menu functions

Phone settings (Menu 9.2)

Settings (Menu 9)

Many different features of your phone’s system can be

customised to suit your preferences.

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

To access this menu, press <Menu> in Idle mode and

Language (Menu 9.2.1)

select Settings

Use this menu to select one of several languages for

the display text.

Time & Date (Menu 9.1)

Greeting message (Menu 9.2.2)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World time menu.

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

ꢀp. 41

Short cut (Menu 9.2.3)

•

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Set date: enter the current date.

Date format: select a date format.

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to assign a shortcut menu to a key.

•

Assigning a menu to a key

•

1. Scroll to a key to be used as a shortcut key.

•

2. Press <Options> and select Change

3. Scroll to a menu to be assigned to the key.

4. Press <Save>.

Using shortcut options

•

Anykey answer: answer an incoming call by

pressing any key, except <Reject>, [ ], and

When this option is not selected, you must press

Accept> or [ ] to answer a call.

Press <Options> to access the following options:

[

•

Change: change a shortcut menu.

Remove: deactivate the shortcut assignment to

the selected key.

•

Voice clarity: increase the microphone’s

sensitivity to allow the other person on the phone

to hear your voice clearly, even though you may be

whispering.

•

Remove all: deactivate all shortcut assignments.

Side key (Menu 9.2.4)

Use this menu to set what the phone does when you

Active folder: answer an incoming call by opening

the phone.

press and hold [

] during an incoming call.

•

Mute: mute the ringer by holding down the key.

Reject: allow you to reject calls by holding down

the key.

Display settings (Menu 9.3)

Use this menu to change settings for the display and

light.

Extra settings (Menu 9.2.5)

You can turn the automatic redialling or answering

feature on or off, and the voice clarity feature.

Wallpaper (Menu 9.3.1)

You can set up the idle screen on both displays.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

•

Main display: select an image to be displayed on

the main display.

•

Cover display: select an image or enter text to be

displayed on the external display.

Menu functions

Text display (Menu 9.3.2)

Backlight (Menu 9.3.6)

You can customise the text composition on the idle

screen.

You can select the length of time the backlight stays

on and the display is on in Dim mode, in which the

backlight is off.

•

Text position: select a text position on the

display. If you don’t want to display text in Idle

•

Main LCD on: select the length of time the

backlight is on.

mode, select Off

•

Text style: select a text style.

•

Main LCD dim: select the length of time the

display is in Dim mode after the backlight turns off.

After a specified time, the display turns off.

Text colour: select a text colour.

Calendar (Menu 9.3.3)

•

Show cover indicators: set whether or not the

cover display icons are shown on the external

display.

Use this menu to display the calendar of the current

month on the idle screen.

Skin (Menu 9.3.4)

Dialing font colour (Menu 9.3.7)

You can select a skin colour for Menu mode.

Use this menu to display numbers in colours when

entering a number for dialling.

LCD brightness (Menu 9.3.5)

Show caller information (Menu 9.3.8)

You can adjust the brightness of the display for

varying lighting conditions.

Use this menu to have a caller’s phone number, or

name if saved in Phonebook, shown on the main

display after you have missed a call. You can also

select With cover display to have caller information

shown on the external display.

Message tone (Menu 9.4.3)

Sound settings (Menu 9.4)

Use this menu to set up the ringer for incoming SMS

or MMS messages and e-mails.

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

•

Tone: select one of several message tones.

Use this menu to select a volume and alert type for

incoming calls.

Alert type: specify how you are to be informed of

any incoming messages.

•

Ring tone: select a ring tone for the call ringer.

•

Repetition: specify how often the phone informs

you of a new message.

Volume: select a ringer volume.

Alert type: specify how you are to be informed of

incoming calls.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the phone

plays when it is switched on or off.

Melody: the phone rings using the selected ring

tone.

Folder tone (Menu 9.4.5)

Vibration: the phone vibrates but not rings.

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Vibration then melody: the phone vibrates three

times and then starts ringing.

Quiet mode (Menu 9.4.6)

Keypad tone (Menu 9.4.2)

Use this menu to set how the phone acts to alert you

to a specific event in Quiet mode, instead of making

sounds.

Use this menu to select the tone that the phone

sounds when you press a key.

You can adjust the keypad tone volume using

•

Vibration: set the phone to vibrate.

[

]

in Idle mode.

Mute: mute all sound settings.

Menu functions

Extra tones (Menu 9.4.7)

Call diverting (Menu 9.5.1)

Use this menu to customise additional tones for the

phone.

This network service reroutes incoming calls to a

phone number that you specify.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

1. Select a call diverting option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

Connection tone: set the phone to beep when it

is connected to the system.

•

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Cancel all: cancel all call diverting options.

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

Indicative tones: set the phone to beep when a

pop-up window appears to indicate that your

phone has completed an operation or an error

occurs.

•

2. Select the type of calls to be diverted.

3. To activate call diverting, select Activate

Otherwise, select Deactivate

Network services (Menu 9.5)

4. Move to the Divert to line.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

5. Enter the number to which calls are to be diverted

and press <OK>.

6. If you selected No reply, move to the Sec line and

select the length of time the network delays before

diverting a call.

•

Change barring password: change the call

barring password obtained from your service

provider.

2. Select the type of calls to be barred.

Call barring (Menu 9.5.2)

3. Press <Activate>. To deactivate call barring,

This network service allows you to restrict your calls.

1. Select a call barring option:

press <Deactivate>.

4. Enter the call barring password supplied by your

•

All outgoing: prohibit outgoing calls.

International: prohibit international calls.

International except to home: only allow

calls to numbers within the current country

when you are abroad, and to your home

country, defined as where your home network

provider is located.

service provider and press <OK>.

Call waiting (Menu 9.5.3)

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which the call waiting

option will apply.

•

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

2. Press <Activate>. To deactivate call waiting,

press <Deactivate>.

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Menu functions

Network selection (Menu 9.5.4)

•

Send number: send your number each time you

make a call.

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area.

Voice mail server (Menu 9.5.6)

Use this menu to store the number of the voicemail

server and access your voicemails.

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

You must enter the voice server number before you

can access your voicemails. Your service provider

can give you the voice server number.

•

Automatic: connect to the first available network

when roaming.

•

Connect to voice mail: connect to the voicemail

server to allow you to listen to your messages. You

can also connect to the voicemail server by

•

Manual: select the network you want.

Caller ID (Menu 9.5.5)

pressing and holding [1] in Idle mode.

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

Voice server number: enter the name and

number for the voicemail server.

Band selection (Menu 9.5.7)

•

Default: use the default setting provided by the

network.

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

•

Hide number: ensure your number does not

display on the other person’s phone.

•

Combined GSM 900/1800

•

GSM 1900

using radio waves, they do not need to be in line of

sight to each other.

Tri band (GSM 1900/GSM 900/1800)

• It is recommended that you don't use the

Bluetooth feature while using multimedia features

such as voice recorder, camera, and MP3 player,

or vice versa for a good performance.

• Some devices may not be compatible with your

phone.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

Setting up the Bluetooth feature

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

Bluetooth (Menu 9.6)

Use this menu to activate the Bluetooth feature.

My devices: search for connectable Bluetooth

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

devices.

ꢀp. 86

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 metres. Since the devices communicate

Menu functions

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

•

Computer

Printer

•

PDA

Unknown device

•

Bluetooth services: display available Bluetooth

services.

The colour of the icon indicates the status of the

the device:

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

3. Select a device.

2. Select Search new device

4. Enter a Bluetooth PIN code and press <OK>. This

code is used just once and you don’t need to

memorise it.

If you have searched for devices before, the phone

displays More devices along with the devices you

have searched for previously. To search for new

devices, select More devices

When the owner of the other device enters the

same code, pairing is complete.

After searching, a list of devices to which you can

connect displays. The following icons indicate the

kind of device:

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has a code, you must

enter it.

•

Hands-free or

headset

•

Mobile phone

Using device options

Sending data via Bluetooth

1. Activate the Bluetooth feature.

From the device list, press <Options> to access the

following options:

2. Select the application in which the item you want

to send is stored.

Options may vary depending on the paired device.

3. From the item list, press <Options> and select

Send via

→

Bluetooth.

•

Connect: connect to the currently selected device.

4. Select the item(s) you want and press <Send>.

Disconnect: end the connection with the device.

The phone searches for devices within range and

displays a list of available devices.

Browse files: search for data from the device and

import data directly to your phone.

5. Select a device.

•

Service list: display available Bluetooth services

for the selected device.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

•

Rename: rename the paired device.

Authorize/Unauthorize device: determine

Receiving data via Bluetooth

whether or not the phone asks you to permit

connection when the device tries to connect to

your phone.

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <Yes>.

•

Delete: delete the selected device or all displayed

devices from the device list.

Menu functions

Phone lock (Menu 9.7.3)

Security (Menu 9.7)

This feature locks the phone from unauthorised use.

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

If you enter an incorrect PIN /PIN 2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change password (Menu 9.7.4)

Use this menu to change your phone password. The

PIN check (Menu 9.7.1)

password is preset to 00000000

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Privacy (Menu 9.7.5)

Use this menu to lock your media contents, including

messages, images, videos, music files, and sounds.

1. Press [

] to check the item(s) to lock.

Change PIN (Menu 9.7.2)

2. Press <Save> to lock the marked items.

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

3. Enter the phone password and press <OK>.

To access the a locked item, you need to enter the

phone password. The password is preset to

00000000

SIM lock (Menu 9.7.6)

Memory status (Menu 9.8)

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

Use this menu to check the amount of memory being

used for storing data in Messages

File manager

Calendar Phonebook, and JAVA world. You can

also check Shared memory for MMS, Email, and File

manager.

FDN mode (Menu 9.7.7)

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers specified in

Reset settings (Menu 9.9)

Use this menu to reset the phone settings, display

settings, and sound settings individually. You can also

reset all the settings in your phone at the same time.

the FDN list.ꢀp. 32

1. Press [

be reset.

] to check the setting category(ies) to

Change PIN2 (Menu 9.7.8)

If supported by your SIM card, the change PIN2

feature changes your current PIN2.

2. Press <Reset> to reset the marked items.

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

change this password

ꢀp. 88

Solve problems

“Enter PUK”

The PIN code has been entered incorrectly three

Solve problems

•

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

Help and personal needs

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

“No service,” “Network failure,” or “Not done”

displays

When you switch on your phone, the following

messages may appear:

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

“Insert SIM card”

•

Be sure that the SIM card is correctly installed.

“Phone lock”

The automatic locking function has been enabled.

You have entered a number but it was not

dialled

•

You must enter the phone’s password before you

can use the phone.

Be sure that you have pressed [ ].

Be sure that you have accessed the right cellular

network.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

Be sure that you have not set an outgoing call

barring option.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Your correspondent cannot reach you

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

No number is dialled when you re-call a

Phonebook entry

•

Be sure that you are accessing the correct cellular

network.

Use the Contact list feature to ensure the number

has been stored correctly.

Be sure that you have not set an incoming call

barring option.

•

Re-store the number, if necessary.

Your correspondent cannot hear you speaking

The battery doesn’t charge properly or the

phone sometimes turns itself off

•

Be sure that you have switched on the

microphone.

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

If the above guidelines do not help you to

solve the problem, take note of:

The phone starts beeping and “Battery low”

flashes on the display

•

The model and serial numbers of your phone

Your warranty details

•

Your battery is insufficiently charged. Recharge the

battery.

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The audio quality of the call is poor

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

•

(

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0 W/

kg.^*

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

The highest SAR value for this model phone was 0.762 W/

kg.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Precautions when using batteries

•

Never use a adapter or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

temperatures below 0°C (32°F).

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the adapter

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved adapters.

Disconnect the adapter from the power source when it

is not in use. Do not leave the battery connected to a

adapter for more than a week, since overcharging may

shorten its life.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Health and safety information

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Electronic devices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

Pacemakers

Operating environment

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

Hearing aids

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

recommended that the equipment should only be used in

wish to consult your hearing aid manufacturer to discuss

alternatives.

Potentially explosive environments

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

Other medical devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Health and safety information

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

inadvertently damage these things or choke on small

parts.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

Do not use the flash or light on the phone too close to

the eyes of people or animals. This may cause damage

to their eyes.

Health and safety information

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

•

If the phone, battery, adapter, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Calendar • 66

Call costs • 31

Call records

Conference call • 28

Connection tone • 82

Converter • 42

Creating messages

MMS • 48

settings • 79

Diverting, calls • 82

DTMF tones, send • 27

Index

dialled • 30

missed • 30

ABC mode, text input • 22

Active folder • 79

Alarm • 41

E-mails

received • 30

Call time • 30

Caller group

creating • 33

managing • 34

Caller ID • 84

Calls

SMS • 47

creating/sending • 49

deleting • 54

setting • 59

viewing • 53

Emergency calls • 96

Creating schedule

anniversaries • 67

events • 66

Answering

call • 25

second call • 26

Anykey answer • 79

Auto redial • 79

miscellaneous • 68

to-do items • 68

answering • 25

barring • 83

FDN (Fixed Dialling Number)

mode • 89

Deleting

Backlight time, set • 80

Band selection • 84

Barring, calls • 83

Battery

call records • 30

e-mails • 54

events • 69

diverting • 82

holding • 26

redialling • 24

rejecting • 25

transferring • 27

waiting • 83

File manager • 63

Forwarding

e-mails • 54

MMS • 51

SMS • 51

MMS • 51

charging • 7

Phonebook • 36

photos • 73, 74

SMS • 51

low indicator • 8

precautions • 93

Bluetooth

Camera

video clips • 76, 77

Delivery reports, message • 57

Dialled calls • 30

Display

receiving, data • 87

sending, data • 87

settings • 85

Games • 40

options • 71, 75

photos • 70

videos • 74

Greeting message • 78

Browser, web • 43

CB (Cell Broadcast) messages•

Characters, enter • 22

Health and safety • 92

Holding, call • 26

language • 78

layout • 10

Calculator • 42

100

phonebook • 36

Message tone • 81

Messages

editing • 32

managing • 35

options • 32

Icons, description • 10

Images, downloaded • 63

Inbox, messages

e-mail • 53

Names

entering • 22

e-mail • 49

greeting • 78

MMS • 48

SMS • 47

speed-dialling • 34

searching • 31

Photos

Network band, select • 84

Network selection • 84

Network services • 82

deleting • 73, 74

taking • 70

viewing • 73

MMS • 51

SMS • 51

web • 52

International calls • 24

Internet • 43

Minute minder • 82

Missed alarm events • 70

Missed calls • 30

MMS messages

creating/sending • 48

deleting • 51

PIN, change • 88

Outbox, messages • 52

Own number • 35

PIN2, change • 89

Power on/off tone • 81

Privacy • 88

Problems, solve • 90

Push messages • 61

Key tone volume • 81

Keypad tones

selecting • 81

sending • 28

Password

call barring • 83

phone • 88

Phone

setting • 57

viewing • 50

MP3 player

Received calls • 30

Received messages

e-mail • 53

Language, select • 78

Last number, redial • 24

Locking

care and maintenance •

display • 10

icons • 10

options • 37

playing • 37

Recording

Multi-party calls • 28

Music, downloaded • 64

Muting

key tones • 28

microphone • 27

My name card • 35

media content • 88

phone • 88

SIM card • 89

videos • 74

password • 88

resetting • 89

switching on/off • 8

unpacking • 6

Phonebook

voice memos • 38

Redialling

automatically • 79

manually • 24

Resetting phone • 89

Ringer

Low battery indicator • 8

Memory status

downloaded items • 65

copying • 32

deleting • 32, 36

101

Index

incoming calls • 81

messages • 81

Road safety • 94

MMS 56

SMS • 56

Text input mode, change • 22

Text, enter • 22

Timer • 43

editing • 84

Waiting call • 83

Web browser

access • 44

bookmarks • 45

cache, clear • 45

World time • 41

Roaming • 84

Tone

Safety

connect • 82

folder • 81

keypad • 81

message • 81

minute minder • 82

power on/off • 81

information • 92

Security, calls • 88

Sent messages • 53

SIM card

inserting • 7

locking • 89

SMS messages

creating/sending • 47

Videos

deleting • 51

setting • 56

viewing • 50

deleting • 77

playing • 77

recording • 74

Voice clarity • 27, 79

Voice memos

playing • 39

recording • 38

Voice recorder

playing • 39

recording • 38

Voicemail server

connecting • 84

Sound settings • 81

Sounds, downloaded • 64

Speed-dial • 34

Stopwatch • 43

Switching on/off

microphone • 27

phone • 8

Template

102

Xpelair XIM100+ User Manual
Toshiba MK5065GSXF User Manual
Sony Ericsson R278d User Manual
Seagate BARRACUDA ST3250823AS User Manual
Samsung SH S223L User Manual
Samsung SGH 2200 User Manual
Samsung GH68 03299A User Manual
Samsung Galaxy S3 Black Unlocked GSM S I9300BLK User Manual
Samsung Cell Phone SGH E890 User Manual
Nokia X3 00 User Manual