Nokia X3 00 User Manual

Nokia X3-00 User Guide

Issue 1

Contents

Care and maintenance

Extra services

Recycle

Organise

Additional safety information

Magnets and magnetic fields

Small children

Operating environment

Medical devices

Vehicles

To-do list

Potentially explosive

Certification information (SAR)

Digital rights management

Third-party applications

Accessories

Battery

Battery and charger information

Nokia battery authentication

guidelines

Safety

SWITCH OFF IN RESTRICTED AREAS

Safety

Follow any restrictions.

Switch the device off in

aircraft, near medical

equipment, fuel, chemicals,

or blasting areas.

Read these simple guidelines. Not

following them may be dangerous or

illegal. Read the complete user guide for

further information.

SWITCH ON SAFELY

QUALIFIED SERVICE

Do not switch the device on

when wireless phone use is

prohibited or when it may

cause interference or danger.

Only qualified personnel may

install or repair this product.

ACCESSORIES AND BATTERIES

ROAD SAFETY COMES FIRST

Use only approved

Obey all local laws. Always

keep your hands free to

operate the vehicle while

driving. Your first

accessories and batteries. Do

not connect incompatible

products.

consideration while driving

should be road safety.

WATER-RESISTANCE

Your device is not water-

resistant. Keep it dry.

INTERFERENCE

All wireless devices may be

susceptible to interference,

which could affect

performance.

Get started

Call key

Microphone

Display

Get to know your phone, insert the

battery, SIM card, and memory card, and

learn some important information

about your phone.

Navi™ key (scroll key)

10 End/Power key

11 Keypad

12 Loudspeaker

Keys and parts

13 Loudspeaker

Earpiece

14 Nokia AV Connector (3.5 mm)

15 Charger connector

16 Micro USB cable connector

17 Volume keys

Music key: skip/rewind

Music key: play/pause

Music key: skip/forward

Left and right selection key

18 Capture key

Get started

bevelled corner facing down and

the contact surface area facing

toward the contacts of the device.

Close the SIM card holder.

19 Camera lens

20 Memory card slot

21 Wrist strap eyelet

Insert the SIM card and battery

Note: Switch off the power and

disconnect the charger and any other

device before removing the covers.

Avoid touching electronic components

while changing the covers. Always store

and use the device with the covers

attached.

The SIM card and its contacts can be

easily damaged by scratches or

bending, so be careful when handling,

inserting, or removing the card.

Open the back cover, and remove it.

Line up the battery contacts, and

insert the battery. Replace the back

cover.

Remove the battery.

Open the SIM card holder. Insert the

SIM card into the holder with the

Get started

Insert and remove the memory card

Open the cover of the memory card

slot.

Insert the card into the memory

card slot with the contact surface

facing down, and press until it locks

into place.

Use only compatible microSD cards

approved by Nokia for use with this

device. Nokia uses approved industry

standards for memory cards, but some

brands may not be fully compatible with

this device. Incompatible cards may

damage the card and the device and

corrupt data stored on the card.

Your device supports microSD cards

with a capacity of up to 8 GB. The size of

a single file must not exceed 2 GB.

Close the cover of the memory card

slot.

Remove the memory card

Important: Do not remove the memory

card during an operation when the card

is being accessed. Doing so may damage

the memory card and the device, and

corrupt data stored on the card.

You can remove or replace the memory

card without switching the device off.

Insert the memory card

Ensure that no application is

currently accessing the memory

card.

Open the cover of the memory card

slot.

Press the memory card slightly in to

release the lock, and remove the

card.

Get started

Charge the battery

You do not need to charge the battery

for a specific length of time, and you can

use the device while it is charging. If the

battery is completely discharged, it may

take several minutes before the

Your battery has been partially charged

at the factory. If the device indicates a

low charge, do the following:

charging indicator appears on the

Connect the charger to a wall outlet.

display or before any calls can be made.

Charging the device while listening to

the radio may affect the quality of

reception.

GSM antenna

Connect the charger to the device.

When the device indicates a full

charge, disconnectthe charger from

the device, then from the wall

outlet.

Your device may have internal and

external antennas. Avoid touching the

antenna area unnecessarily while the

antenna is transmitting or receiving.

Contact with antennas affects the

communication quality and may cause

a higher power level during operation

and may reduce the battery life.

You can also charge the battery with a

USB cable with power from a computer.

Connect the USB cable to a USB port

of a computer and to your device.

When the battery is fully charged,

disconnect the USB cable.

Get started

The figure shows the GSM antenna area When connecting any external device or

marked in grey.

any headset, other than those approved

by Nokia for use with this device, to the

Nokia AV Connector, pay special

attention to volume levels.

Accessories

Connect a USB cable

Do not connect products that create an

output signal as this may cause damage

to the device. Do not connect any

voltage source to the Nokia AV

Connector.

Strap

Open the cover of the USB connector,

and connect the USB cable to the device.

Headset

Warning:

When you use the headset, your ability

to hear outside sounds may be affected.

Do not use the headset where it can

endanger your safety.

Thread a strap as shown in the picture

and tighten it.

10 Switch it on

Switch it on

copyrights. Copyright protection may

prevent some images, music, and other

content from being copied, modified, or

transferred.

Make back-up copies or keep a written

record of all important information

stored in your device.

Learn how to switch on your phone, and

how to use the basic functions.

About your device

The wireless device described in this

guide is approved for use on the GSM

850, 900, 1800, and 1900 MHz

When connecting to any other device,

read its user guide for detailed safety

instructions. Do not connect

networks. Contact your service provider

for more information about networks.

incompatible products.

Your device may have preinstalled

bookmarks and links for third-party

internet sites and may allow you to

access third-party sites. These are not

affiliated with Nokia, and Nokia does

not endorse or assume liability for

them. If you access such sites, take

precautions for security or content.

The images in this guide may differ from

your device display.

Refer to the user guide for other

important information about your

device.

Network services

Warning:

To use the device you must have service

from a wireless service provider. Some

features are not available on all

To use any features in this device, other

than the alarm clock, the device must be

switched on. Do not switch the device

on when wireless device use may cause

interference or danger.

networks; other features may require

that you make specific arrangements

with your service provider to use them.

Network services involve transmission

of data. Check with your service provider

for details about fees in your home

network and when roaming on other

When using this device, obey all laws

and respect local customs, privacy and

legitimate rights of others, including

Switch it on 11

networks. Your service provider can

explain what charges will apply.

more information, contact a Nokia

Care point or your phone dealer.

•

The PIN (UPIN) code, supplied with

the SIM (USIM) card, helps to protect

the card against unauthorised use.

Your service provider may have

requested that certain features be

disabled or not activated in your device.

If so, these features will not appear on

your device menu. Your device may also

have customized items such as menu

names, menu order, and icons.

The PIN2 (UPIN2) code, supplied

with some SIM (USIM) cards, is

required to access certain services.

PUK (UPUK) and PUK2 (UPUK2) codes

may be supplied with the SIM (USIM)

card. If you enter the PIN code

incorrectly three times in

Access codes

To set how your phone uses the access

codes and security settings, select

Menu >Settings >Security >Access

codes.

succession, you are asked for the

PUK code. If the codes are not

supplied, contact your service

provider.

•

The security code helps to protect

your phone against unauthorised

use. The preset code is 12345. You

can change the code and set the

phone to request the code. Some

operations require the security

code regardless of the settings, for

example if you want to restore the

factory settings. Keep the code

secret and in a safe place separate

from your phone. If you forget the

code and your phone is locked, your

phone will require service and

•

The barring password is required

when using the call barring service

to restrict calls to and from your

phone (network service).

To view or change the security

module settings for the browser,

select Menu >Settings >

Security >Security module sett..

additional charges may apply. For

12 Switch it on

Switch the device on and off

more information, contact your service

provider.

Standby mode

When the phone is ready for use, and

you have not entered any characters,

the phone is in the standby mode.

Display

Switch on and off

Press and hold the power key.

Enter the PIN code

If requested , enter the code PIN code

(displayed as ****).

Set the time and date

If requested, enter the date, the local

time, and the time zone and the

Signal strength of the cellular

daylight saving time of your location.

network

Battery charge status

Indicators

When you switch on your device for the

first time, you may be prompted to get

the configuration settings from your

service provider (network service). For

Clock

Name of the network or the

operator logo

Switch it on 13

Navigate in the home screen

Date (only if the Home screen is

deactivated)

Scroll up or down to navigate in the list,

and select Select, View, or Edit. The

arrows indicate that further

Display

Function of the left selection key

Function of the Navi key (scroll key)

information is available.

10 Function of the right selection key

Stop navigating

Select Exit.

You may change the function of the left

and right selection key. See " Left and

right selection keys ", p. 22.

Shortcuts

When your device is in the standby or

home screen mode, you can use the

following shortcuts.

Home screen

The home screen displays a list of

selected features and information that

you can directly access.

List missed, received, and dialled

calls

Select Menu >Settings >Display >

Press the call key. To make a call, scroll

to the number or name, and press the

call key.

Home screen.

Activate the home screen

Select Home screen mode.

Start the web browser

Press and hold 0.

Organise and personalise the home

screen

Call the voice mailbox

Select Personalise view.

Press and hold 1.

Select a key to activate the home

Use other keys as shortcuts

screen

See "Dialling shortcuts", p. 30.

Select Home screen key.

14 Switch it on

Indicators

The currently active profile is

timed.

You have unread messages.

A headset is connected to the

device.

You have unsent, cancelled, or

failed messages.

The device is connected to

another device using a USB data

cable.

The keypad is locked.

The device does not ring for

incoming calls or text

messages.

Navigate the menus

An alarm is set.

The phone offers you anextensive range

of functions that are grouped into

menus.

The device is registered to the

GPRS or EGPRS network.

A GPRS or EGPRS connection is

open.

To access the menu, select Menu.

The GPRS or EGPRS connection is

suspended (on hold).

Bluetooth connectivity is

activated.

Scroll through the menu, and select

an option (for example, Settings).

If the selected menu contains

further submenus, select one (for

example, Call).

A GPS signal is available

(external GPS antenna

necessary).

Select the setting of your choice.

To return to the previous menu

No GPS signal available

(external GPS antenna

necessary).

level, select Back.

To exit the menu, select Exit.

If you have two phone lines, the

second line is in use.

All incoming calls are diverted

to another number.

Calls are limited to a closed user

group.

To change the menu view, select

Options >Main menu view. Scroll

right, and select from the available

options.

To rearrange the menu, select

Options >Organise. Scroll to the menu

Switch it on 15

item to be moved, and select Move.

Scroll to where you want to move the

menu item, and select OK. To save the

change, select Done >Yes.

emergency number programmed into

your device.

Functions without a SIM card

Some functions of your phone may be

used without inserting a SIM card, such

as Organiser functions and games.

Some functions appear dimmed in the

menus and cannot be used.

Lock the keys

Lock the keypad to prevent accidental

keypresses.

Lock the keypad

Flight profile

Select Menu, and press * within 3.5

seconds.

Use the Flight profile in radio sensitive

environments to deactivate all radio

frequency functions. You still have

access to offline games, the calendar,

and phone numbers. When the Flight

Unlock the keypad

Select Unlock, and press * within 1.5

seconds. If requested, enter the lock

code.

profile is active,

is displayed.

Answer a call when the keypad is

Activate the Flight profile

locked

Select Menu >Settings >Profiles >

Press the call key. When you end or

reject a call, the keypad locks

automatically.

Flight >Activate or Personalise.

Deactivate the Flight profile

Select any other profile.

Further features are Automatic

keyguard and Security keyguard. See

"Phone settings", p. 19.

When the device or keypad is locked,

calls may be possible to the official

16 Support and updates

Warning:

Support and updates

With the Flight profile you cannot make

or receive any calls, including

emergency calls, or use other features

that require network coverage. To make

calls, you must first activate the phone

function by changing profiles. If the

device has been locked, enter the lock

code.

Nokia helps you in many ways to gain

the most benefit from your device.

You can find the model number of your

device on the back cover.

Support

When you want to learn more about

how to use your product or you are

unsure how your device should

function, see the user guide or see the

support pages at www.nokia.com/

support or your local Nokia website, or

with a mobile device,

If you need to make an emergency call

while the device is locked and in the

Flight profile, you may be also able to

enter an official emergency number

programmed in your device in the lock

code field and select 'Call'. The device

will confirm that you are about to exit

Flight profile to start an emergency call.

www.nokia.mobi/support.

If this does not resolve your issue, do

one of the following:

•

Restart the device: switch off the

device, and remove the battery.

After about a minute, replace the

battery, and switch on the device.

•

Restore the original factory settings

as explained in the user guide.

Update your device software

regularly for optimum performance

and possible new features, as

explained in the user guide.

Support and updates 17

Software updates using your PC

If your issue remains unsolved, contact

Nokia for repair options. See

Nokia Software Updater is a PC

www.nokia.com/repair. Before sending

your device for repair, always back up

the data in your device.

application that enables you to update

your device software. To update your

device software, you need a compatible

PC, broadband internet access, and a

compatible USB data cable to connect

your device to the PC.

To get more information, to check the

release notes for the latest software

versions, and to download the Nokia

Software Updater application, see

www.nokia.com/softwareupdate or

your local Nokia website.

My Nokia

Receive free tips, tricks, and support for

your Nokia phone, plus free trial

content, interactive demonstrations, a

personalised web page, and news about

the latest Nokia products and services.

Get the most out of your Nokia phone

and register at My Nokia today! For more

information and availability in your

region, see www.nokia.com/mynokia.

To update the device software, do the

following:

Download content

Download and install the Nokia

Software Updater application to

your PC.

You may be able to download new

content (for example, themes) to your

phone (network service).

Connect your device to the PC using

a USB data cable, and select PC

Suite.

Important: Use only services that you

trust and that offer adequate security

and protection against harmful

software.

For the availability of different services

and pricing, contact your service

provider.

Open the Nokia Software Updater

application. The Nokia Software

Updater application guides you to

back up your files, update the

software, and restore your files.

18 Support and updates

Software updates over the air

manager sett. >Serv. softw.

updates.

Your service provider may send phone

software updates over the air directly to

your phone (network service). This

option may not be available, depending

on your phone.

Request a software update

Select Menu >Settings >

Phone >Phone updates to

request available software updates

from your service provider.

Downloading software updates may

involve the transmission of large

amounts of data (network service).

Make sure that the device battery has

enough power, or connect the charger

before starting the update.

Select Current softw. details to

display the current software version

and check whether an update is

needed.

Select Downl. phone softw. to

download and install a software

update. Follow the instructions on

the display.

Warning:

If you install a software update, you

cannot use the device, even to make

emergency calls, until the installation is

completed and the device is restarted.

Be sure to back up data before accepting

installation of an update.

If the installation was cancelled

after the download, select Install

softw. update to start the

installation.

The software update may take several

minutes. If there are problems with the

installation, contact your service

provider.

Software update settings

This option may not be available,

depending on your phone.

Restore factory settings

To allow or disallow software and

configuration updates, select Menu >

Settings >Configuration >Device

To restore the phone back to factory

settings, select Menu >Settings >

Rest. factory sett. and from the

following:

Make it your device 19

Make it your device

Restore settings only — Reset all

preference settings without deleting

any personal data.

Set up your device, personalise it, and

connect it in several ways.

Restore all — Reset all preference

settings and delete all personal data,

such as contacts, messages, media files,

and activation keys.

Basic settings

Phone settings

Select Menu >Settings and Phone.

Select from the following:

Language settings — To set the

language of your device, select Phone

language and a language. To set the

language of your device according to

the information on the SIM card, select

Phone language >Automatic.

Memory status — View the memory

consumption.

Automatic keyguard — The keypad is

locked automatically after a preset time

delay when the device is in the standby

mode or home screen and no function

has been used.

Security keyguard — Set the device to

request the security code to unlock the

keypad.

Voice recognition — Set up voice

commands, or start voice recognition

training.

20 Make it your device

Flight query — Set the device to

prompt for the Flight profile when you

switch the device on. In the Flight

profile, all radio connections are closed.

Select from the following:

PIN code request or UPIN code

request — Set the device to request for

the PIN or UPIN code every time the

device is switched on. Some SIM cards

do not allow the code request to be

deactivated.

Phone updates — Allow software

updates from your service provider

(network service). The available options

may vary.

Call barring service — Restrict

incoming calls to and outgoing calls

from your device (network service). A

barring password is required.

Operator selection — Manually select

which network to use.

Help text activation — Set the device

to display help text.

Fixed dialling — Restrict your

Start-up tone — Play a tone when you

outgoing calls to selected phone

numbers if supported by your SIM card.

When fixed dialling is activated, GPRS

connections are not possible except

while sending text messages over a

GPRS connection. In this case, the

recipient’s phone number and the

message centre number must be

included in the fixed dialling list.

switch the device on.

Confirm SIM actions — Access

additional network services from your

SIM card. This option may not be

available, depending on your SIM card.

Security settings

Select Menu >Settings and Security.

Closed user group — Define a group of

people whom you can call and who can

call you (network service).

When security features that restrict calls

are in use (such as call barring, closed

user group, and fixed dialling), calls may

be possible to the official emergency

number programmed into your device.

Call barring and call diverting cannot be

active at the same time.

Security level — To request the

security code whenever a new SIM card

is inserted into the device, select

Phone.

Make it your device 21

Profiles

Access codes — Change the security

code, PIN code, UPIN code, PIN2 code, or

barring password.

Your phone has various setting groups

called profiles, which you can customise

with ringing tones for different events

and environments.

PIN2 code request — Set the device to

request the PIN2 code when using a

specific device feature protected by the

PIN2 code. Some SIM cards do not allow

the code request to be deactivated. This

option may not be available depending

on your SIM card. For details, contact

your service provider.

Select Menu >Settings >Profiles, the

desired profile, and from the following

options:

Activate — to activate the selected

profile

Code in use — Display and select the

Personalise — to change the profile

type of PIN code to be used.

settings

Authority certificates or User

certificates — View the list of the

authority or user certificates available

on your device.

Timed — to set the profile to be active

for a certain time. When the time set for

the profile expires, the previous profile

that was not timed becomes active.

Security module sett. — View Secur.

module details, activate Module PIN

request, or change the module PIN and

signing PIN.

Themes

A theme contains elements for

personalising your phone.

Select Menu >Settings >Themes and

Personalise your phone

from the following options:

Give your phone a personal touch with

ringing tones, display backgrounds, and

themes. Add shortcuts for your

preferred features, and attach

enhancements.

Select theme — Open the Themes

folder, and select a theme.

Theme downloads — Open a list of

links to download more themes.

22 Make it your device

Tones

Slide animation — to display an

animation when you open or close the

slide

You can change the tone settings of the

selected active profile.

Select Menu >Settings >Tones. You

can find the same settings in the

Profiles menu.

Screen saver — to create and set a

screen saver

Font size — to set the font size for

messaging, contacts, and web pages

Operator logo — to display the

Lights

operator logo

To activate or deactivate light effects

associated with different phone

functions, select Menu >Settings >

Lights.

Cell info display — to display the cell

identity, if available from the network

My shortcuts

With personal shortcuts, you get quick

access to frequently used functions of

your phone.

Display

Select Menu >Settings >Display and

from the following:

Left and right selection keys

Wallpaper — to add a background

image for the home screen mode

To change the function assigned to the

left or right selection key, select

Home screen — to activate, organise,

Menu >Settings >My shortcuts >

Left selection key or Right selection

key, and the desired function.

and personalise the home screen mode

Home screen font col. — to select the

font colour for the home screen mode

Navigation key icons — to display the

scroll key icons in the home screen

mode

In the home screen mode, if the left

selection key is Go to, to activate a

function, select Go to >Options and

from the following:

Notification details — to display

details in missed call and message

notifications

Select options — to add or remove a

function

Make it your device 23

Organise — to rearrange the functions Select Menu >Settings and Phone.

Set the language

Other shortcuts

Select Language settings >Phone

Select Menu >Settings >My

language and the language.

shortcuts and from the following:

Train voice recognition to your voice

Navigation key — to assign other

functions from a predefined list to the

navigation key (scroll key)

Select Voice recognition >Voice

recog. training.

Home screen key — to select the

movement of the navigation key to

activate the home screen mode

Activate a voice command for a

function

Select Voice recognition >Voice

commands, a feature, and the function.

indicates that the voice command is

activated. If is not displayed, select

Add.

Assign dialling shortcuts

Create shortcuts by assigning phone

numbers to the number keys 2-9.

Select Menu >Contacts >Speed

Play an activated voice command

dials, and scroll to a number key.

Select Play.

Select Assign, or, if a number has

already been assigned to the key,

select Options >Change.

Rename or deactivate a voice

command

Enter a number or search for a

contact.

Scroll to a function, and select

Options >Edit or Remove.

Voice commands

Activate or deactivate all voice

commands

You can use voice commands to make

phone calls, launch applications, and

activate profiles. Voice commands are

language-dependent.

Select Options >Add all orRemove

all.

24 Make it your device

Connect

When the wireless device is in the

remote SIM mode, you can only use a

compatible connected accessory, such

as a car kit, to make or receive calls.

Your phone provides several features to

connect to other devices to transmit and

receive data.

Your wireless device will not make any

calls, except to the emergency numbers

programmed into your device, while in

this mode.

To make calls, you must first leave the

remote SIM mode. If the device has been

locked, enter the lock code to unlock it

first.

Bluetooth wireless technology

Bluetooth technology allows you to

connect your device, using radio waves,

to a compatible Bluetooth device within

10 metres (32 feet).

This device is compliant with Bluetooth

Specification 2.1 + EDR supporting the

following profiles: SIM access,

phonebook access, object push, file

transfer, headset, handsfree, generic

access, serial port, generic object

exchange, advanced audio distribution,

audio video remote control, service

discovery application, personal area

networking, and generic audio/video

distribution. To ensure interoperability

between other devices supporting

Bluetooth technology, use Nokia

approved accessories for this model.

Check with the manufacturers of other

devices to determine their compatibility

with this device.

Open a Bluetooth connection

Select Menu >Settings >

Connectivity >Bluetooth.

Select My phone's name, and enter

a name for your device.

To activate Bluetooth connectivity,

select Bluetooth >On. indicates

that Bluetooth connectivity is

active.

To connect your device to an audio

accessory, select Conn. audio

access. and the accessory.

To pair your device with any

Bluetooth device in range, select

Paired devices >Add new

device.

Features using Bluetooth technology

increase the demand on battery power

and reduce the battery life.

Make it your device 25

Scroll to a found device, and select

phones to send and receive data over an

internet protocol (IP)-based network.

To define how to use the service, select

Menu >Settings >Connectivity >

Packet data >Packet data conn. and

from the following options:

Add.

Enter a passcode (up to 16

characters) on your device, and

allow the connection on the other

Bluetooth device.

Operating the device in hidden mode is When needed — to establish the

a safer way to avoid malicious software.

Do not accept Bluetooth connectivity

from sources you do not trust.

packet data connection when an

application needs it. The connection is

closed when the application is

terminated.

Alternatively, switch off the Bluetooth

function. This does not affect other

functions of the device.

Always online — to automatically

connect to a packet data network when

you switch the phone on

Connect your PC to the internet

You can use Bluetooth technology to

connect your compatible PC to the

internet. Your device must be able to

connect to the internet (network

service), and your PC must support

Bluetooth technology. After connecting

to the network access point (NAP)

service of the device and pairing with

your PC, your device automatically

opens a packet data connection to the

internet.

You can use your phone as a modem by

connecting it to a compatible PC using

Bluetooth technology. For details, see

the Nokia PC Suite documentation.

USB data cable

You can use the USB data cable to

transfer data between the phone and a

compatible PC or a printer supporting

PictBridge.

To activate the phone for data transfer

or image printing, connect the data

cable and select the mode:

Packet data

General packet radio service (GPRS) is a

network service that allows mobile

26 Make it your device

PC Suite — to use the cable for Nokia

another device, PC, or network server

(network service).

PC Suite

Printing & media — to use the phone

with a PictBridge compatible printer or

with a compatible PC

Connect a USB device

You can connect a USB storage (for

example, a memory stick) to your device

and browse in the file system and

transfer files.

Data storage — to connect to a PC that

does not have Nokia software and use

the phone as data storage

Connect a compatible adapter cable

To change the USB mode, select

Menu >Settings >Connectivity >

USB data cable and the desired USB

mode.

to the USB port of your device.

Connect the USB storage to the

adapter cable.

Select Menu >Gallery and the USB

Synchronisation and backup

device to browse.

Select Menu >Settings >Sync and

Note: Not all USB storage devices are

supported, depending on their power

consumption.

backup and from the following:

Phone switch — Synchronise or copy

selected data between your phone and

another phone using Bluetooth

technology.

Nokia PC Suite

With Nokia PC Suite, you can manage

your music and synchronise contacts,

calendar entries, notes, and to-do notes

between your device and a compatible

PC or a remote internet server (network

service).

Create backup — Create a backup of

selected data.

Restore backup — Select a stored

backup file, and restore it to the phone.

Select Options >Details for

information about the selected backup

file.

An installation file for Nokia PC Suite

may be available on the memory card

supplied with your device.

Data transfer — Synchronise or copy

selected data between your phone and

Make it your device 27

Operator menu

To install PC Suite on your PC do the

following:

Access a portal to services provided by

your network operator. For more

information, contact your network

operator. The operator can update this

menu with a service message.

Connect your device to your PC,

using a compatible USB data cable.

Select Data storage as the USB

mode on your device. Your device

appears as removable disk in your

PC.

SIM services

Your SIM card may provide additional

services. You can access this menu only

if it is supported by your SIM card. The

name and contents of the menu depend

on the available services.

If the installation does not start

automatically, select the memory

card of your device on your PC and

execute the PC-Suite installation

file.

Accessing these services may involve

sending messages or making a phone

call for which you may be charged.

Follow the instructions of the

installation program on your PC.

After the successful installation of PC

suite on your PC, you may delete the

installation file from the memory card

of your device, to free memory space for

more media or applications.

Position log

The network may send you a position

request (network service). To subscribe

and agree upon the delivery of

positioning information, contact your

service provider.

For more information, and to download

PC Suite, visit www.nokia.com/support.

To accept or reject the position request,

select Accept or Reject. If you miss the

request, the phone automatically

accepts or rejects it according to what

you have agreed with your network

operator or service provider.

Network provider services

Your network provider provides several

additional services you may want to

use. For some of these services, charges

may apply.

28 Make it your device

To view the information on the 10 most

recent privacy notifications and

requests, select Menu >Log >

Positioning >Position log.

SIM messages

SIM messages are specific text messages

that are saved to your SIM card. You can

copy or move those messages from the

SIM to the phone memory, but not vice

versa.

Info messages, SIM messages, and

service commands

To read SIM messages, select Menu >

Messaging >Options >SIM

messages.

Info messages

You can receive messages on various

topics from your service provider

(network service). For more

information, contact your service

provider.

Configuration settings

You can configure your device with

settings that are required for certain

services. You may receive these settings

as a configuration message from your

service provider.

Select Menu >Messaging >Info

messages and from the available

options.

Service commands

Select Menu >Settings.

Service commands allow you to write

and send service requests (USSD

commands) to your service provider,

such as activation commands for

network services.

Select Configuration and from the

following:

Default config. sett. — View the

service providers saved in the device,

and set a default service provider.

To write and send the service request,

select Menu >Messaging >Serv.

commands. For details, contact your

service provider.

Act. def. in all apps. — Activate the

default configuration settings for

supported applications.

Preferred access pt. — View the saved

access points.

Stay in touch 29

Device manager sett. — Allow or

prevent the device from receiving

software updates. This option may not

be available, depending on your device.

Stay in touch

Learn how to make calls, write text,

send messages, and use the e-mail

functionality of your device.

Personal config. sett. — Add manually

new personal accounts for various

services, and activate or delete them. To

add a new personal account, select

Add or Options >Add new. Select the

service type, and enter the required

parameters. To activate a personal

account, scroll to the account, and select

Options >Activate.

Make calls

Make a voice call

Dial a number manually

Enter the phone number, including the

area code, and press the call key.

For international calls, press * twice for

the international prefix (the + character

replaces the international access code),

enter the country code, the area code

without the leading 0, if necessary, and

the phone number.

Redial a number

To access the list of dialled numbers, in

the standby mode, press the call key.

Select a number or name, and press the

call key.

Call a contact

Select Menu >Contacts and Names.

Select a contact, and press the call key.

30 Stay in touch

Handle voice calls

•

If Menu >Settings >Call >Speed

dialling >On is selected, press and

hold a number key.

To handle calls with the slide, select

Menu >Settings >Call >Slide call

handling.

Voice dialling

Answer an incoming call

Make a phone call by saying the name

Press the call key, or open the slide.

that is saved in Contacts.

End a call

As voice commands are language-

dependent, before voice dialling, you

must select Menu >Settings >

Phone >Language settings >Phone

language and your language.

Press the end key, or close the slide.

Mute the ringing tone

Select Silence.

Note: Using voice tags may be difficult

in a noisy environment or during an

emergency, so you should not rely solely

upon voice dialling in all circumstances.

Reject an incoming call

Press the end key.

Adjust the volume in a call

Use the volume keys.

In the home screen mode, press and

hold the right selection key. A short

tone sounds, and Speak after the

tone is displayed.

Dialling shortcuts

Assign a phone number to one of the

number keys, 2-9. See "Assign dialling

shortcuts", p. 23.

Say the name of the contact you

want to dial. If the voice recognition

is successful, a list of proposed

matches is displayed. The phone

plays the voice command of the first

match on the list. If it is not the

correct command, scroll to another

entry.

Use a dialling shortcut to make a call in

one of the following ways:

•

Press a number key, then the call

key.

Stay in touch 31

Options during a call

Call your voice mailbox

Many of the options that you can use

during a call are network services. For

availability, contact your service

provider.

Press and hold 1.

Edit your voice mailbox number

Select Menu >Messaging >Voice

messages >Voice mailbox no..

During a call, select Options and from

the available options.

Call log

Some of the network options are Hold,

New call, Add to conference, End all

calls, and the following:

To view the information on your calls,

messages, data, and synchronisation,

select Menu >Log and the desired

item.

Send DTMF — to send tone strings

Swap — to switch between the active

Note: The actual invoice for calls and

services from your service provider may

vary, depending on network features,

rounding off for billing, taxes, and so

forth.

call and the call on hold

Transfer — to connect a call on hold to

an active call and disconnect yourself

Conference — to make a conference

call

Call settings

Private call — to have a private

Select Menu >Settings and Call and

discussion in a conference call

from the following:

Call divert — Divert your incoming calls

(network service). You may not be able

to divert your calls if some call barring

functions are active.

Voice messages

The voice mailbox is a network service

to which you may need to subscribe. For

more information, contact your service

provider.

Anykey answer — Answer an

incoming call by briefly pressing any

key, except the power key, the left and

right selection keys, or the end key.

32 Stay in touch

Automatic redial — The device redials Slide call handling — Answer or end a

the number automatically if a call fails.

The device tries to call the number 10

times.

call by opening or closing the slide.

Text and messages

Write text, and create messages and

notes.

Voice clarity — Improve speech

intelligibility, especially in noisy

environments.

Write text

Speed dialling — Dial the names and

phone numbers assigned to the number

keys (2-9) by pressing and holding the

corresponding number key.

Text modes

To enter text (for example, when

writing messages) you can use

traditional or predictive text input.

Call waiting — The network notifies

you of an incoming call while you have

a call in progress (network service).

When you write text, press and hold

Options to switch between traditional

Call duration display — Display the

text input, indicated by

, and

duration of the call in progress.

predictive text input, indicated by

Not all languages are supported by

predictive text input.

Summary after call — Briefly display

the approximate duration after each

call.

The character cases are indicated by

Send my caller ID — Show your phone

number to the person you are calling

(network service). To use the setting

agreed upon with your service provider,

select Set by network.

, and

To change the character case, press #.

To change from the letter to number

mode, indicated by

, press and hold

Outgoing call line — Select the phone

line for making calls, if your SIM card

supports multiple phone lines (network

service).

#, and select Number mode. To change

from the number to the letter mode,

press and hold #.

Stay in touch 33

To set the writing language, select

•

If the word is not correct, press

* repeatedly, and select the

word from the list.

Options >Writing language.

Traditional text input

If the ? character is displayed

after the word, the word you

intended to write is not in the

dictionary. To add the word to

the dictionary, select Spell.

Enter the word using

Press a number key, 2-9, repeatedly

until the desired character appears. The

available characters depend on the

selected writing language.

If the next letter you want is located on

the same key as the present one, wait

until the cursor appears, and enter the

letter.

traditional text input, and

select Save.

•

To write compound words,

enter the first part of the word,

and scroll right to confirm it.

Write the last part of the word,

and confirm the word.

To access the most common

punctuation marks and special

characters, press 1 repeatedly. To access

the list of special characters, press *. To

insert a space, press 0.

Start writing the next word.

Text and multimedia messages

You cancreate a message and optionally

attach, for example, a picture. Your

phone automatically changes a text

message to a multimedia message

when a file is attached.

Predictive text input

Predictive text input is based on a built-

in dictionary to which you can also add

new words.

Start writing a word, using the keys

2 to 9. Press each key only once for

one letter.

Text messages

Your device supports text messages

beyond the limit for a single message.

Longer messages are sent as two or

more messages. Your service provider

To confirm a word, scroll right or

add a space.

34 Stay in touch

may charge accordingly. Characters

with accents, other marks, or some

language options take more space, and

limit the number of characters that can

be sent in a single message.

The total number of characters left and

the number of messages needed for

sending are displayed.

exceeds this limit, the device may make

it smaller so that it can be sent by MMS.

Important: Exercise caution when

opening messages. Messages may

contain malicious software or

otherwise be harmful to your device or

PC.

For availability and subscription to the

multimedia messaging service (MMS),

contact your service provider.

To send messages, the correct message

centre number must be stored in your

device. Normally, this number is set by

default through your SIM card. To set the

number manually, select Menu >

Create a text or multimedia message

Select Menu >Messaging >

Messaging >Message settings >

Text messages >Message centres >

Add centre, and enter a name and the

number from the service provider.

Create message >Message.

To add recipients, scroll to the To:

field, and enter the recipient’s

number or e-mail address, or select

Add to select recipients from the

available options. Select Options to

add recipients and subjects and to

set sending options.

Multimedia messages

A multimedia message can contain text,

pictures, and sound or video clips.

Scroll to the Text: field, and enter

Only devices that have compatible

features can receive and display

multimedia messages. The appearance

of a message may vary depending on

the receiving device.

the message text.

To attach content to the message,

scroll to the attachment bar at the

bottom of the display, and select

the desired type of content.

The wireless network may limit the size

To send the message, select Send.

of MMS messages. If the inserted picture

Stay in touch 35

The message type is indicated at the top

of the display and changes

Read a message and reply

Your device notifies you when you

automatically depending on the

receive a message.

content of the message.

Service providers may charge differently

depending on the message type. For

details, contact your service provider.

Important: Exercise caution when

opening messages. Messages may

contain malicious software or

otherwise be harmful to your device or

PC.

Conversations and Inbox view

Read the received message

In Conversations, you can view your

received messages together with

related messages and replies you have

sent. You can switch to the traditional

Inbox view to list your received

messages one by one.

Select View. If more than one message

was received, select the message from

Inbox or Conversations.

Reply to the message

Select Reply.

Select Menu >Messaging.

View messages in a conversation

Send and organise messages

Select Conversations.

To send a message, select Send. The

phone saves the message in the Outbox

folder, and the sending starts.

Scroll to a conversation, and select

Open.

Scroll to a message and select

Note: The message sent icon or text on

your device screen does not indicate

that the message is received at the

intended destination.

If message sending is interrupted, the

phone tries to resend the message a few

times. If these attempts fail, the

Options >Open.

Switch between Conversations and

Inbox views

Select Options >Inbox view or

Conversation view.

36 Stay in touch

Nokia Xpress audio messages

message remains in the Outbox folder.

To cancel message sending, in the

Outbox folder, select Options >Cancel

sending.

To save the sent messages in the Sent

items folder, select Menu >

Messaging >Message settings >

General settings >Save sent

messages.

Create and send an audio message

using MMS in a convenient way.

Select Menu >Messaging >

Create message >Audio

message. The voice recorder

opens.

Record your message.

Enter one or more phone numbers

in the To: field, or select Add to

retrieve a number.

The phone saves received messages in

the Inbox folder. Organise your

messages in the Saved items folder.

To send the message, select Send.

To add, rename, or delete afolder, select

Menu >Messaging >Saved items >

Options.

Message settings

Select Menu >Messaging >Message

settings and from the following:

Flash messages

General settings — Save copies of sent

messages in your device, overwrite old

messages if the message memory

becomes full, and set up other

Flash messages are text messages that

are instantly displayed upon reception.

To write a flash message, select

Menu >Messaging >Create

message >Flash message.

preferences related to messages.

Text messages — Allow delivery

reports, set up message centres for SMS

and SMS e-mail, select the type of

character support, and set up other

preferences related to text messages.

Enter the recipient’s phone number,

write your message (maximum 70

characters), and select Send.

Multimedia messages — Allow

delivery reports, set up the appearance

Stay in touch 37

of multimedia messages, allow the

reception of multimedia messages and

advertisements, and set up other

preferences related to multimedia

messages.

Messaging Service is in use. See "Nokia

Messaging IM", p. 37 and "Nokia

Messaging Mail", p. 39.

Otherwise, see "Nokia IM", p. 40 and

"E-mail", p. 41.

E-mail messages — Allow e-mail

reception, set the image size in e-mail,

and set up other preferences related to

e-mail.

Nokia Messaging IM

With instant messaging (IM) you can

chat with other online users using your

device.

Service messages — Activate service

messages, and set up preferences

related to service messages.

You can use your already existing

account with an IM community that is

supported by your device.

Mail and Instant Messaging

Set up your device to send and receive

mails from your mail account or to chat

in your instant messaging (IM)

community.

If you are not registered to a IM service,

you can create an IM account with a

supported IM service, using your

computer or your device. The menus

may vary depending on the IM service.

Your device may support the Nokia

Messaging Service (NMS) or the classic

Nokia Mail and Nokia IM, depending on

your country. To see which messaging

system is in use select Menu >

IM services

Select Menu >Messaging >

Messaging >E-mail message.

Instant messaging.

Select an IM service.

Enter your account ID and

password.

Follow the instructions on the

display.

appears on top of the display, the Nokia

38 Stay in touch

Enter your message in the text box

at the bottom of the display.

Create a new Nokia account

To create a Nokia account, which

includes mail and IM services, using your

PC, visit www.ovi.com. To create an

account using your device, do the

following:

Select Send.

Receiving messages

When a new message arrives in your

current conversation, the message

appears at the end of the chat history.

When a new message arrives for

another conversation, the

Select Menu >Messaging >E-

mail message.

Follow the instructions on the

display.

corresponding conversation tab flashes.

To switch between conversations, do

the following:

Use IM services simultaneously

To return to the IM main view, select

Scroll up to the conversation tabs.

Home from within any IM service.

Scroll left or right to open a

Select an IM service, and sign in.

conversation.

To switch between IM services, in

the contacts list view, scroll left or

right.

When a new message arrives from

another community, it is indicated at

the top or bottom corner.

Scroll up, and select Switch or Select.

Exchange messages

Select Menu >Messaging >Instant

messaging.

Notification settings

Even when you are not using the

application, you are notified of new

messages. To modify notification

settings, do the following:

Send an IM

Select an IM service.

Select a contact from the contacts

list.

In the IM main view, select

Each conversation is on a tab in the

conversation view.

Options >IM settings.

Stay in touch 39

Select a notification type and Save.

Set up mail

You can sign in to an existing mail

account or set up a new Ovi Mail

account.

Leave the IM application

When you exit the Instant messaging

(IM) application, you remain signed in to

IM services. Your sessions remain active

for a period of time, according to your

service subscription. When the IM

application is running in the

Select Menu >Messaging >E-mail

message.

Select your mail service provider.

background, you can open other

applications, and return to using IM

without signing in again.

Enter your account ID and

password.

Select Remember password to

disable the password query when

you access your mail account.

Close the IM window

Go to the IM main view, and select Exit.

Select Sign In.

Sign out from IM

Select Options >Sign Out.

All conversations are closed.

To sign in to an additional mail account,

select Add account.

Set up Ovi Mail

Nokia Messaging Mail

If you do not already have a mail

account, you can create a Nokia account,

which includes the Ovi Mail service.

Access your mail accounts from

different providers with your mobile

device to read, write, and send mail.

Before you can use mail, you must have

an mail account. If you do not have

already an mail account, create it in Ovi.

The menus may vary depending on the

mail provider.

Select Get Ovi Mail.

Follow the instructions on the

display.

Once you have created your new Nokia

account, you can sign in to the Ovi Mail

40 Stay in touch

service and start sending and receiving

mail. You can also use the account to

sign into other Ovi services, such as IM.

For more information, see

Create and send a mail

Select Options >Compose.

Enter the recipient’s mail address,

the subject, and your message.

www.ovi.com.

To attach a file to the mail, select

Options >Attach file.

Read, create, and send mail

To capture an image to attach to the

mail, select Options >Attach new

image.

Select Menu >Messaging >E-mail

message and a mail account.

To send the mail, select Send.

Read mail and reply

Select a mail and Open.

Close the mail application

Use the scroll key to see the entire

mail.

Select Sign Out.

To reply to or forward a mail, select

Options.

Access IM from your mail account

Some mail service providers allow you

to access your instant messaging

View and save attachments

Mails with attachments, for example,

pictures, are marked with a paperclip

icon. Some attachments may not be

compatible with your device, and

cannot be displayed on your device.

account directly from your mail account.

To sign in to your provider's instant

messaging service when writing a mail,

select Options and your IM service.

Expand the attachment list.

Nokia IM

Select an attachment and View.

With the instant messaging (IM)

To save the attachment to your

network service, you can send short text

messages to online users. You must

subscribe to a service and register with

the IM service you want to use. For

device, select Save.

Stay in touch 41

availability, pricing, and instructions,

contact your service provider. The

menus may vary depending on your IM

service provider.

To connect to the service, select

Menu >Messaging >IMs, and follow

the instructions.

mail setup wizard. Follow the

instructions on the display.

Write and send an e-mail

You may write your e-mail before

connecting to the e-mail service.

Select Menu >Messaging >

Create message >E-mail

message.

E-mail

Access your POP3 or IMAP4 e-mail

account with your phone to read, write,

and send e-mail. This e-mail application

is different from the SMS e-mail

function.

Enter the recipient’s e-mail address,

the subject, and the e-mail

message. To attach a file, select

Options >Insert and from the

available options.

If more than one e-mail account is

defined, select the account from

which you want to send the e-mail.

Before you can use e-mail, you must

have an e-mail account and the correct

settings. For availability and the correct

settings, contact your e-mail service

provider.

To send the e-mail, select Send.

Read an e-mail and reply

E-mail setup wizard

Important: Exercise caution when

opening messages. Messages may

contain malicious software or

otherwise be harmful to your device or

PC.

The e-mail setup wizard starts

automatically if no e-mail settings are

defined in the phone. To start the setup

wizard for an additional e-mail account,

select Menu >Messaging and the

existing e-mail account. Select

To download e-mail message

Options >Add mailbox to start the e-

headers, select Menu >

42 Stay in touch

Messaging and your e-mail

Automatic retrieval — to retrieve

new e-mail automatically from your

e-mail account

account.

To download an e-mail and its

attachments, select the e-mail and

Open or Retrieve.

To enable the new e-mail

notification, select Menu >

Messaging >Message settings >

E-mail messages >New e-mail

notif. >On.

To reply to or forward the e-mail,

select Options and from the

available options.

To disconnect from your e-mail

account, select Options >

Disconnect. The connection to the

e-mail account automatically ends

after some time without activity.

New e-mail notifications

Your phone can automatically check

your e-mail account in time intervals

and issue a notification when new e-

mail is received.

Select Menu >Messaging >

Message settings >E-mail

messages >Edit mailboxes.

Select your e-mail account,

Downloading sett., and the

following options:

Mailbox upd. interval — to set

how often your phone checks your

e-mail account for new e-mail

Image and video 43

Record video clips

Image and video

Capture images

Activate video mode

Press and hold the capture key, or, if in

Activate the camera

image mode, scroll left or right.

Press the capture key; or, if in video

Start recording

mode, scroll left or right.

Press the capture key.

Zoom in or out

Pause or resume recording

In image mode, scroll up and down, or

Select Pause or Continue.

use the volume keys.

Alternatively, press the capture key.

Capture an image

Stop recording

Press the capture key.

Images are saved in Gallery.

Select Stop.

Video clips are saved in Gallery.

Display images after capture

Select Options >Settings >Photo

Camera and video settings

preview time and the preview time.

Select Menu >Media >Camera.

End the image preview manually

In image or video mode, select

Select Back.

Options and from the following:

Self-timer — Use the self-timer.

Your device supports an image capture

resolution of up to 1536x2048 pixels.

Effects — Apply different effects (for

example, greyscale and false colour) to

the captured image.

White balance — Adapt the camera to

the current light conditions.

44 Image and video

Landscape format or Portrait

format — Select the orientation of the

camera.

images inside the album are not deleted

from the memory.

Rotate an image

Settings — Modify other camera and

video settings, and select where to save

images and video clips.

Select Options >Landscape mode or

Portrait mode.

Gallery

View a slide show

Manage images, video clips, music files,

themes, graphics, tones, recordings,

and received files. These files are stored

in the device memory or on a memory

card and may be arranged in folders.

A slide show uses the images of the

currently selected folder or album.

Select All photos, Timeline, or

Albums.

Select Options >Slide show.

Photos

Select Start slide show.

View images and play video clips with

the Photos application.

Edit images

You can, for example, rotate, flip, crop,

and adjust the brightness, contrast, and

colours of images.

Select Menu >Gallery >Photos.

Select from the following:

Select an image in All photos,

All photos — View images in a

thumbnail grid. You can sort images by

date, name, or size.

Timeline, or Albums.

Select Options >Edit photo.

Timeline — View images in the order

Select an editing option, and use

the scroll key to change the settings

or values.

they were captured.

Albums — Sort images into albums.

You can create, rename and remove

albums. If you remove an album, the

Image and video 45

Music and videos

View the folders of the memory card

when moving a file

Your device includes a media player for

playing songs and video clips. Music and Scroll to the memory card, and scroll

video files stored in the music folder in

the device memory or on the memory

card are automatically detected and

added to the video or music library.

right.

Print images

Your device supports Nokia XpressPrint,

allowing you to print images in the JPEG

file format.

Select Menu >Gallery and Music &

videos.

Select from the following:

Connect your device to a compatible

printer, using a USB data cable, or,

if supported by the printer,

Videos — List all available video clips.

All songs — List all available songs. You

can sort songs by artist, album, or genre,

for example.

Bluetooth connectivity.

Select an image from Gallery and

Options >Print.

Manage folders and files

Memory card

To manage folders and files in Gallery,

Use a memory card to store your

multimedia files, such as video clips,

songs, sound files, images, and

messaging data.

select Menu >Gallery.

View a list of folders

Select All content.

Select Menu >Gallery >All content >

View a list of files in a folder

Memory card.

Select a folder and Open.

Some of the folders in Gallery that

contain content used by your device (for

example, Themes) can be stored on the

memory card.

46 Entertainment

If your memory card has not been pre-

formatted, you need to format it. When

you format a memory card, all data on

the card is permanently deleted.

Entertainment

Listen to music

Listen to music with the music player or

radio, and record sounds or voice with

the voice recorder. Download music

from the internet, or transfer music

from your PC.

Format the memory card

Select Options >Mem. card

options >Format memory card >

Yes. When formatting is complete,

enter a name for the memory card.

Warning:

Continuous exposure to high volume

may damage your hearing. Listen to

music at a moderate level, and do not

hold the device near your ear when the

loudspeaker is in use.

Protect the memory card with a

password

Select Options >Mem. card

options >Set password. The

password is stored in your device, so

you only have to enter the password

when attempting to use the memory

card in another device.

Media player

To open the media player, select

Menu >Media >Media player.

Remove the memory card password

Select Options >Mem. card

Music menu

options >Delete password.

Access your music and video files stored

in the device memory or on the memory

card, download music or video clips

from the web, or view compatible video

streams from a network server

(network service).

Check the memory consumption

Select Options >Details. The memory

consumption of different data groups,

and the amount of available memory to

install new software, is displayed.

Select Menu >Media >Media player.

Entertainment 47

Play a media file

Select Account and a streaming

service account from the active

configuration settings.

Select a file from the available folders

and Play.

Download files from the web

Play songs

Select Options >Downloads and a

Operate the media player

download site.

Press the music keys, or use the scroll

keys according to the virtual keys on the

display.

Update the music library after

adding files

Select Options >Update library.

Adjust the volume

Use the volume keys.

Create a playlist

Start or pause playing

Select Playlists >Create playlist,

and enter the name of the playlist.

Press

Add music or video clips from the

displayed lists.

Skip to the next song

Press

To store the playlist, select Done.

Skip to the previous song

Configure a streaming service

Press twice.

You may receive the streaming settings

as a configuration message from the

service provider. You can also enter the

settings manually.

Fast-forward the current song

Press and hold

Rewind the current song

Select Options >Downloads >

Streaming settings >

Configuration.

Press and hold

Switch to the music menu

Select a service provider, Default,

Select

or Personal config. for streaming.

48 Entertainment

Switch to the current playlist

PC software from

www.music.nokia.com/download.

Select

•

Use PC Suite to connect your device

to your PC using Bluetooth

connectivity or a compatible USB

data cable, and use the Nokia Music

Manager. To use a USB data cable,

select PC Suite as the connection

mode.

Leave the media player playing in

the background

Press the end key.

Stop the media player

Press and hold the end key.

Connect your device to your PC

using Bluetooth connectivity or a

compatible USB data cable, and

copy music files to the device

memory. To use a USB data cable,

select Data storage as the

connection mode.

Change the media player look

Your device provides several themes to

change the look of the media player.

Select Menu >Media >Media player

and Go to Media player >Options >

Settings >Media player theme and

the desired theme.

Use Windows Media Player. Connect

a compatible USB data cable, and

select Printing & media as the

connection mode.

The virtual keys may change depending

Radio

on the theme.

Your device supports Nokia

Transfer music from a computer

XpressRadio, allowing you to listen to

radio stations with built-in antenna.

You can transfer music to your device in

the following ways:

Select Menu >Radio.

•

Use Nokia Music to transfer, rip,

burn, and play new music on your

PC and mobile device. Download the

Entertainment 49

that corresponds to the number of the

station.

Tune in to radio stations

Operate the radio

Adjust the volume

Use the scroll key according to the

virtual keys on the display.

Use the volume keys.

Alternatively, use the music keys

Pause or resume playback

, and

Press the scroll key (

music key.

Search for the next available station

Alternatively, press the

Press and hold the scroll key left or right.

Set the radio to play in the

Alternatively, press and hold the

background

music key.

Briefly press the end key.

Tune the radio frequency in 0.05 MHz

steps

Close the radio

Press and hold the end key.

Briefly press the scroll key left or right.

Save a station to a memory location

Select Options and from the following:

Select Options >Save station.

Search all stations — Search

automatically for the available stations

at your location.

Enter the name of a radio station

Select Options >Stations >

Set frequency — Enter the frequency

Options >Rename.

of a radio station.

Switch to another saved station

Station directory — Access a website

Scroll up or down.

with a list of radio stations.

Alternatively, press the

key.

music

Stations — List, rename, or delete

saved stations.

To access a station directly from the

saved station list, press the number key

50 Entertainment

To use the graphical keys

scroll left or right.

, or

Radio settings

Select Menu >Radio.

Start recording

Select Options >Settings and from the

Select , or, during a call, select

following:

Options >Record. While recording a

call, all parties to the call hear a faint

beeping.

RDS — Display information from the

radio data system, such as the name of

the station.

Pause recording

Auto-frequency — Allow the device to

automatically switch to a frequency

with better reception (available when

RDS is activated).

Select

Stop recording

Select . The recording is saved in the

Recordings folder in Gallery.

Play via — Listen using the headset or

the loudspeaker.

Output — Switch between stereo and

mono output.

To play or send the last recording, to

access the list of recordings, or to select

the memory and the folder to store the

recordings, select Options and the

appropriate option.

Radio theme — Select the look of the

radio.

Voice recorder

Record speech, sound, or an active call,

Equaliser

and save the recordings in Gallery.

Adjust the sound when using the media

Select Menu >Media >Voice

player.

recorder.

Select Menu >Media >Equaliser.

The recorder cannot be used when a

Activate a predefined equaliser set

data call or GPRS connection is active.

Scroll to a set, and select Activate.

Entertainment 51

For the availability of these services,

pricing, and instructions, contact your

service provider.

You may receive the configuration

settings required for browsing as a

configuration message from your

service provider.

To set up the service, select Menu >

Internet >Web settings >

Configuration sett., a configuration,

and an account.

Create a new equaliser set

Select one of the last two sets in the

list and Options >Edit.

Use the scroll key to adjust the

sound controls.

To save the settings and enter a

name for the set, select Save and

Options >Rename.

Stereo widening

Stereo widening creates a wider stereo

sound effect when you are using a

stereo headset.

Connect to a service

Select Menu >Media and Stereo

To make a connection to the service,

select Menu >Internet >Home; or in

the standby mode, press and hold 0.

widening.

Web

To select a bookmark, select Menu >

You can access various internet services

with your device browser (network

service). The appearance of the internet

pages may vary due to screen size. You

may not be able to see all the details on

the internet pages.

Internet >Bookmarks.

To select the last visited URL, select

Menu >Internet >Last web addr..

To enter the address of a service, select

Menu >Internet >Go to address.

Enter the address, and select OK.

After you make a connection to the

service, you can start browsing its

pages. The function of the phone keys

may vary in different services. Follow

Important: Use only services that you

trust and that offer adequate security

and protection against harmful

software.

52 Entertainment

the text guides on the phone display.

For more information, contact your

service provider.

Display — Select the font size, whether

images are shown, and how the text is

displayed.

General — Select whether web

Web uploads

addresses are sent as Unicode (UTF-8),

the encoding type for the contents, and

whether JavaScript™ is enabled.

The available options may vary.

Open the web page of your online

sharing service to view uploaded

images and videos and to change

settings (network service).

Cache memory

Open an online sharing service

Select Menu >Internet >Web

uploads and an online sharing

service.

A cache is a memory location that is

used to store data temporarily. If you

have tried to access or have accessed

confidential information requiring

passwords, empty the cache after each

use. The information or services you

have accessed are stored in the cache.

Select from the links offered by the

service.

Change settings of an online sharing

service

A cookie is data that a site saves in the

cache memory of your phone. Cookies

are saved until you clear the cache

memory.

To clear the cache while browsing,

select Options >Tools >Clear the

cache.

Select Menu >Internet >Web

uploads and an online sharing

service.

Select Options >Settings to open

the settings page of the service.

Appearance settings

While browsing the web, select

Options >Settings and from the

following:

To allow or prevent the phone from

receiving cookies, select Menu >

Internet >Web settings >

Security >Cookies; or, while

Entertainment 53

browsing, select Options >Settings > Certificates have a restricted lifetime. If

Security >Cookies.

"Expired certificate" or "Certificate not

valid yet" is shown, even if the

certificate should be valid, check that

the current date and time in your device

are correct.

Before changingany certificate settings,

you must make sure that you really trust

the owner of the certificate and that the

certificate really belongs to the listed

owner.

Browser security

Security features may be required for

some services, such as banking services

or online shopping. For such

connections you need security

certificates and possibly a security

module, which may be available on your

SIM card. For more information, contact

your service provider.

Games and applications

To view or change the security module

settings, or to view a list of authority or You can manage applications and

user certificates downloaded to your

device, select Menu >Settings >

Security >Security module sett.,

Authority certificates, or User

certificates.

games. Your phone may have some

games or applications installed. These

files are stored in the phone memory or

an attached memory card and may be

arranged in folders.

Important: Even if the use of

Launch an application

certificates makes the risks involved in

remote connections and software

installation considerably smaller, they

must be used correctly in order to

benefit from increased security. The

existence of a certificate does not offer

any protection by itself; the certificate

manager must contain correct,

Select Menu >Applications >Games,

Memory card, or Collection. Scroll to a

game or an application, and select

Open.

To set sounds, lights, and shakes for a

game, select Menu >Applications >

Options >Application settings.

authentic, or trusted certificates for

increased security to be available.

54 Entertainment

Other available options may include the

following:

the list of available bookmarks is

shown.

•

Use the Nokia Application Installer

from PC Suite to download the

applications to your phone.

Update version — to verify that a new

version of the application is availablefor

download from the web (network

service)

For the availability of different services

and pricing, contact your service

provider.

Web page — to provide further

information or additional data for the

application from an internet page

(network service), if available

Application access — to restrict the

application from accessing the network

Download an application

Your phone supports J2ME™ Java

applications. Ensure that the

application is compatible with your

phone before downloading it.

Important: Only install and use

applications and other software from

trusted sources, such as applications

that are Symbian Signed or have passed

the Java Verified™ testing.

You can download new applications and

games in different ways.

•

Select Menu >Applications >

Options >Downloads >App.

downloads or Game downloads;

Maps 55

Find detailed information about Maps

on www.nokia.com/maps.

To use the Maps application, select

Menu >Organiser >Maps and from

the available options.

Maps

You can browse maps for different cities

and countries, search for addresses and

points of interest, plan routes from one

location to another, save locations as

landmarks, and send them to

Download maps

compatible devices.

Your device may contain pre-installed

maps on the memory card. You can

download a new set of maps through

the internet using the Nokia Map Loader

PC software.

Almost all digital cartography is

inaccurate and incomplete to some

extent. Never rely solely on the

cartography that you download for use

in this device.

Note: Downloading content such as

maps, satellite images, voice files,

guides or traffic information may

involve transmission of large amounts

of data (network service).

Content such as satellite images, guides,

weather and traffic information and

related services are generated by third

parties independent of Nokia. The

content may be inaccurate and

incomplete to some extent and is

subject to availability. Never rely solely

on the aforementioned content and

related services.

Download and install Nokia Map

Loader

To download the Nokia Map Loader

on your PC and for further

instructions, visit

www.maps.nokia.com.

Select Menu >Organiser >Maps

to do an initial configuration.

Download maps

Before you download new maps for the

first time, ensure that you have a

memory card inserted in the device.

To change the selection of maps on your

memory card, use the Nokia Map Loader

to delete all maps on the memory card

and download a new selection, to

56 Maps

ensure that all maps are from the same application. Find out your location, or

release.

measure distances and plot

coordinates.

Download maps automatically

After pairing your device with an

external GPS receiver, it may take

several minutes for the device to display

the current location.

Select Menu >Organiser >Maps and

Settings >Network settings >Allow

network usage >Yes or In home

network.

The Global Positioning System (GPS) is

operated by the government of the

United States, which is solely

Deactivate automatic download

Select No.

responsible for its accuracy and

maintenance. The accuracy of location

data can be affected by adjustments to

GPS satellites made by the United States

government and is subject to change

with the United States Department of

Defense civil GPS policy and the Federal

Radionavigation Plan. Accuracy can also

be affected by poor satellite geometry.

Availability and quality of GPS signals

may be affected by your location,

buildings, natural obstacles, and

Note: Downloading content such as

maps, satellite images, voice files,

guides or traffic information may

involve transmission of large amounts

of data (network service).

Maps and GPS

Your device does not have an internal

GPS antenna. To use applications that

require a GPS connection, use a

compatible external GPS receiver

(accessory sold separately). Pair the GPS

receiver with your device using

Bluetooth wireless technology. For

more information, see the user guide of

the GPS receiver.

weather conditions. GPS signals may

not be available inside buildings or

underground and may be impaired by

materials such as concrete and metal.

GPS should not be used for precise

location measurement, and you should

never rely solely on location data from

You can use the Global Positioning

System (GPS) to support the Maps

Maps 57

the GPS receiver and cellular radio

The navigation licence is connected to

networks for positioning or navigation. your SIM card. If you insert another SIM

card in your device, you are asked to

Extra services

purchase a licence when starting

navigation. During the purchase

procedure, you are offered to transfer

the existing navigation licence to the

new SIM card without extra charge.

You can upgrade Maps to a full

navigation system to be used by car and

by foot. You need a regional licence for

the full navigation system. The car

navigation is fully voice-guided with

two- and three-dimensional map views.

The pedestrian navigation is limited to

a speed of 30 km/h (18.6 miles/h) and

provides no voice guidance. The

navigation service is not available for all

countries and regions. For details, see

your local Nokia website.

To use this service, you need a

compatible external GPS receiver that

supports Bluetooth wireless

technology.

Purchase a navigation service

Select Menu >Organiser >Maps and

Extra services >Purchase nav.

license, and follow the instructions.

To use navigation with voice guidance,

you must allow the Maps application to

use a network connection.

58 Organise

Organise

Handle contacts

Search for a contact

Let your phone help you to organise

your life.

Select Menu >Contacts >Names.

Scroll through the list of contacts, or

enter the first characters of the contact's

name.

Manage contacts

Save names, phone numbers, and

addresses as contacts in the device and

on the SIM card.

Save a name and phone number

Select Menu >Contacts >Add new.

Select Menu >Contacts.

Add or edit a detail

Select the memory for contacts

Select a contact and Details >

The device memory can save contacts

with additional details, such as various

phone numbers and text items. You can

also save an image, a tone, or a video

clip for a limited number of contacts.

Options >Add detail.

Delete a detail

Select a contact and Details. Select a

detail and Options >Delete.

The SIM card memory can save names

with one phone number attached to

them. The contacts saved in the SIM card

Delete a contact

Select a contact and Options >Delete

contact.

memory are indicated with

Delete all contacts

Select Settings >Memory in use

Select Menu >Contacts >Del. all

contacts >From phone memory or

From SIM card.

to select the SIM card, the device

memory, or both for your contacts.

Select Phone and SIM to recall

contacts from both memories.

When you save contacts, they are

saved in the device memory.

Organise 59

Business cards

Copy or move contacts between the

device and SIM card memories

You can send and receive a person’s

contact information from a compatible

device that supports the vCard standard.

Copy single contacts

Select Options >Marking options >

Mark. Mark the contacts you want to

copy or move, and select Options >

Copy marked or Move marked.

To send a business card, search for the

contact, and select Details >

Options >Send business card.

When you receive a business card, select

Show >Save to save the business card

in the phone memory.

Copy all contacts

Select Menu >Contacts >Copy

contacts or Move contacts.

Date and time

Create a contact group

To change the clock type, time, time

zone, or date, select Menu >

Settings >Date and time.

Arrange contacts into caller groups with

different ringing tones and group

images.

When travelling to a different time

zone, select Menu >Settings >Date

and time >Date & time settings >

Time zone:, and scroll left or right to

select the time zone of your location.

The time and date are set according to

the time zone and enable your phone to

display the correct sending time of

received text or multimedia messages.

Select Menu >Contacts >Groups.

Select Add or Options >Add new

group to create a new group.

Enter the group name, optionally

select an image and a ringing tone,

and select Save.

To add contacts to the group, select

the group and View >Add.

For example, GMT -5 denotes the time

zone for New York (USA), 5 hours west

of Greenwich, London (UK).

60 Organise

Alarm clock

Options >Week view. To delete all

notes in the calendar, select Options >

Delete notes >All notes.

To edit settings related to date and

time, select Options >Settings and

from the available options. To delete old

notes automatically after a specified

time, select Options >Settings >

Auto-delete notes and from the

To sound an alarm at a desired time.

Set the alarm

Select Menu >Organiser >Alarm

clock.

Activate the alarm, and enter the

alarm time.

To repeat the alarm on selected

days of the week, select Repeat: > available options.

On and the days.

Make a calendar note

Select the alarm tone.

Scroll to the date, and select Options >

Make a note. Select the note type, and

fill in the fields.

Define the snooze time-out period,

and select Save.

Stop the alarm

To-do list

To stop the sounding alarm, select

To create a note for a task that you must

do, select Menu >Organiser >To-do

list.

Stop.

If you let the alarm sound for a minute

or select Snooze, the alarm stops for the

snooze time-out period, then resumes.

To create a note if no note is added,

select Add; otherwise, select

Options >Add. Fill in the fields, and

select Save.

Calendar

Select Menu >Organiser >Calendar.

To view a note, scroll to it, and select

View.

The current day is framed. If there are

any notes set for the day, the day is in

bold type. To view the day notes, select

View. To view a week, select

Organise 61

Notes

To stop the timer, select Stop

timer.

To write and send notes, select Menu >

Organiser >Notes.

Interval timer

To make a note if no note is added,

select Add; otherwise, select

Options >Make a note. Write the

note, and select Save.

To have an interval timer with up to

10 intervals started, first enter the

intervals.

Select Menu >Organiser >

Countd. timer >Interval timer.

Calculator

To start the timer, select Start

Your phone provides a standard, a

timer >Start.

scientific, and a loan calculator.

To select how the interval timer should

start the next period, select Menu >

Organiser >Countd. timer >

Select Menu >Organiser >

Calculator and, from the available

options, the calculator type and the

operating instructions.

Settings >Contin. to next period and

from the available options.

This calculator has limited accuracy and

Stopwatch

is designed for simple calculations.

You can measure time, take

intermediate times, or take lap times

using the stopwatch.

Countdown timer

Normal timer

To activate the timer, select

Menu >Organiser >Countd.

timer >Normal timer, enter a

time, and write a note that is

displayed when the time expires. To

change the time, select Change

time.

Select Menu >Organiser >

Stopwatch and from the following

options:

Split timing — to take intermediate

times. To reset the time without saving

it, select Options >Reset.

Lap timing — to take lap times

To start the timer, select Start.

62 Green tips

Continue — to view the timing that you

Green tips

have set in the background

Show last — to view the most recently

measured time if the stopwatch is not

reset

View times or Delete times — to view

or delete the saved times

To set the stopwatch timing in the

Here are tips on how you can contribute

to protecting the environment.

background, press the end key.

Save energy

When you have fully charged the battery

and disconnected the charger from the

device, unplugthe chargerfromthewall

outlet.

You do not need to charge your battery

so often if you do the following:

•

Close and disable applications,

services, and connections when not

in use.

•

Decrease the brightness of the

screen.

Set the device to enter the power

saver mode after the minimum

period of inactivity, if available in

your device.

•

Disable unnecessary sounds, such

as keypad and ringing tones.

Green tips 63

Recycle

Most of the materials in a Nokia phone

are recyclable. Check how to recycle

your Nokia products at

www.nokia.com/werecycle, or with a

mobile device, www.nokia.mobi/

werecycle.

Recycle packaging and user guides at

your local recycling scheme.

Learn more

For more information on the

environmental attributes of your

device, see www.nokia.com/

ecodeclaration.

64 Digital rights management

Digital rights management

Some licence may be connected to a specific SIM card, and

the protected content can be accessed only if the SIM card

is inserted in the device.

Content owners may use different types of digital rights

management (DRM) technologies to protect their

intellectual property, including copyrights. This device

uses various types of DRM software to access DRM-

protected content. With this device you can access content

protected with WMDRM 10, OMA DRM 1.0, OMA DRM 1.0

forward lock, and OMA DRM 2.0. If certain DRM software

fails to protect the content, content owners may ask that

such DRM software's ability to access new DRM-protected

content be revoked. Revocation may also prevent renewal

of such DRM-protected content already in your device.

Revocation of such DRM software does not affect the use

of content protected with other types of DRM or the use of

non-DRM-protected content.

Third-party applications

The third-party applications provided with your device

may have been created and may be owned by persons or

entities not affiliated with or related to Nokia. Nokia does

not own the copyrights or intellectual property rights to

the third-party applications. As such, Nokia does not take

any responsibility for end-user support, functionality of

the applications, or the information in the applications or

these materials. Nokia does not provide any warranty for

the third-party applications.

BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE

APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF

ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT

PERMITTED BY APPLICABLE LAW. YOU FURTHER

Digital rights management (DRM) protected content

comes with an associated licence that defines your rights

to use the content.

ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES

MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF

TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE

ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR

OTHER RIGHTS.

If your device has OMA DRM-protected content, to back up

both the licence and the content, use the backup feature

of Nokia PC Suite.

Other transfer methods may not transfer the licence which

need to be restored with the content for you to be able to

continue the use of OMA DRM-protected content after the

device memory is formatted. You may also need to restore

the licence in case the files on your device get corrupted.

Accessories

Warning:

If your device has WMDRM-protected content, both the

licence and the content will be lost if the device memory

is formatted. You may also lose the licence and the content

if the files on your device get corrupted. Losing the licence

or the content may limit your ability to use the same

content on your device again. For more information,

contact your service provider.

Use only batteries, chargers, and accessories approved by

Nokia for use with this particular model. The use of any

other types may invalidate any approval or warranty, and

may be dangerous. In particular, use of unapproved

chargers or batteries may present a risk of fire, explosion,

leakage, or other hazard.

Battery 65

For availability of approved accessories, please check with

your dealer. When you disconnect the power cord of any

accessory, grasp and pull the plug, not the cord.

Avoid extreme temperatures. Always try to keep the

battery between 15°C and 25°C (59°F and 77°F). Extreme

temperatures reduce the capacity and lifetime of the

battery. A device with a hot or cold battery may not work

temporarily. Battery performance is particularly limited in

temperatures well below freezing.

Battery

Battery and charger information

Your device is powered by a rechargeable battery. The

battery intended for use with this device is BL-4CT. Nokia

may make additional battery models available for this

device. This device is intended for use when supplied with

power from the following chargers: AC-8. The exact

charger model number may vary depending on the type

of plug. The plug variant is identified by one of the

following: E, EB, X, AR, U, A, C, K, or UB.

Do not short-circuit. Accidental short-circuiting can occur

when a metallic object such as a coin, clip, or pen causes

direct connection of the positive (+) and negative (-)

terminals of the battery. (These look like metal strips on

the battery.) This might happen, for example, when you

carry a spare battery in your pocket or purse. Short-

circuiting the terminals may damage the battery or the

connecting object.

The battery can be charged and discharged hundreds of

times, but it will eventually wear out. When the talk and

standby times are noticeably shorter than normal, replace

the battery. Use only Nokia approved batteries, and

recharge your battery only with Nokia approved chargers

designated for this device.

Disposal. Do not dispose of batteries in a fire as they may

explode. Dispose of batteries according to local

regulations. Please recycle when possible. Do not dispose

as household waste.

Leak. Do not dismantle, cut, open, crush, bend, puncture,

or shred cells or batteries. In the event of a battery leak,

prevent battery liquid contact with skin or eyes. If this

happens, flush the affected areas immediately with water,

or seek medical help.

If a battery is being used for the first time or if the battery

has not been used for a prolonged period, it may be

necessary to connect the charger, then disconnect and

reconnect it to begin charging the battery. If the battery

is completely discharged, it may take several minutes

before the charging indicator appears on the display or

before any calls can be made.

Damage. Do not modify, remanufacture, attempt to insert

foreign objects into the battery, or immerse or expose it

to water or other liquids. Batteries may explode if

damaged.

Safe removal. Always switch the device off and disconnect

the charger before removing the battery.

Correct use. Use the battery only for its intended purpose.

Improper battery use may result in a fire, explosion, or

other hazard. If the device or battery is dropped, especially

on a hard surface, and you believe the battery has been

damaged, take it to a service centre for inspection before

continuing to use it. Never use any charger or battery that

is damaged. Keep your battery out of the reach of small

children.

Proper charging. Unplug the charger from the electrical

plug and the device when not in use. Do not leave a fully

charged battery connected to a charger, since

overcharging mayshorten its lifetime. If leftunused, afully

charged battery will lose its charge over time.

66 Care and maintenance

Nokia battery authentication guidelines

Successful completion of the steps is not a total assurance

of the authenticity of the battery. If you cannot confirm

authenticity or if you have any reason to believe that your

Nokia battery with the hologram on the label is not an

authentic Nokia battery, you should refrain from using it,

and take it to the nearest Nokia authorised service centre

or dealer for assistance.

Always use original Nokia batteries for your safety. To

check that you are getting an original Nokia battery,

purchase it from a Nokia authorised service centre or

dealer, and inspect the hologram label using the following

steps:

Authenticate hologram

To find out more about original Nokia batteries, see

www.nokia.com/battery.

When you look at the hologram on the label, you

should see the Nokia connecting hands symbol from

one angle and the Nokia Original Enhancements

logo when looking from another angle.

Care and maintenance

Your device is a product of superior design and

craftsmanship and should be treated with care. The

following suggestions will help you protect your warranty

coverage.

•

Keep the device dry. Precipitation, humidity, and all

types of liquids or moisture can contain minerals

that will corrode electronic circuits. If your device

does get wet, remove the battery, and allow the

device to dry completely before replacing it.

•

Use a soft, clean, dry cloth to clean any lenses, such

as camera, proximity sensor, and light sensor lenses.

When you angle the hologram left, right, down and

up, you should see 1, 2, 3 and 4 dots on each side

respectively.

Do not use or store the device in dusty, dirty areas.

Its moving parts and electronic components can be

damaged.

•

Do not store the device in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

Do not store the device in cold areas. When the

device returns to its normal temperature, moisture

can form inside the device and damage electronic

circuit boards.

Do not attempt to open the device other than as

instructed in this guide.

Additional safety information 67

•

Do not drop, knock, or shake the device. Rough

handling can break internal circuit boards and fine

mechanics.

•

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the device.

Do not paint the device. Paint can clog the moving

parts and prevent proper operation.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas, modifications, or

attachments could damage the device and may

violate regulations governing radio devices.

The crossed-out wheeled-bin symbol on your product,

battery, literature, or packaging reminds you that all

electrical and electronic products, batteries, and

accumulators must be taken to separate collection at the

end of their working life. This requirement applies in the

European Union. Do not dispose of these products as

unsorted municipal waste. For more environmental

information, see the product Eco-Declarations at

www.nokia.com/environment.

•

Use chargers indoors.

Always create a backup of data you want to keep,

such as contacts and calendar notes.

Additional safety information

•

To reset the device from time to time for optimum

performance, power off the device and remove the

battery.

Note: The surface of this device does not contain nickel

in the platings. Thesurface of this device contains stainless

steel.

These suggestions apply equally to your device, battery,

charger, or any accessory. If any device is not working

properly, take it to the nearest authorised service facility

for service.

Magnets and magnetic fields

Keep your device away from magnets or magnetic fields.

Small children

Recycle

Your device and its accessories are not toys. They may

contain small parts. Keep them out of the reach of small

children.

Always return your used electronic products, batteries,

and packaging materials to a dedicated collection point.

This way you help prevent uncontrolled waste disposal

and promote the recycling of materials. More detailed

information is available from the product retailer, local

waste authorities, national producer responsibility

organisations, or your local Nokia representative. Check

how to recycle your Nokia products at www.nokia.com/

werecycle, or if browsing on a mobile device,

Operating environment

This device meets RF exposure guidelines in the normal

use position at the ear or at least 1.5 centimetres (5/8

inch)away from the body. Any carry case, belt clip, or

holder for body-worn operation should not contain metal

and should position the device the above-stated distance

from your body.

www.nokia.mobi/werecycle.

To send data files or messages requires a quality

connection to the network. Data files or messages may be

delayed until such a connection is available. Follow the

68 Additional safety information

Hearing aids

separation distance instructions until the transmission is

completed.

Some digital wireless devices may interfere with some

hearing aids.

Medical devices

Vehicles

Operation of radio transmitting equipment, including

wireless phones, may interfere with the function of

inadequately protected medical devices. Consult a

physician or the manufacturer of the medical device to

determine whether they are adequately shielded from

external RF energy. Switch off your device when

regulations posted instruct you to do so. Hospitals or

health care facilities may use equipment sensitive to

external RF energy.

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles such as

electronic fuel injection, electronic antilock braking,

electronic speed control, and air bag systems. For more

information, check with the manufacturer of your vehicle

or its equipment.

Only qualified personnel should service the device or

install the device in a vehicle. Faulty installation or service

may be dangerous and may invalidate your warranty.

Check regularly that all wireless device equipment in your

vehicle is mounted and operating properly. Do not store

or carry flammable liquids, gases, or explosive materials

in the same compartment as the device, its parts, or

accessories. Remember that air bags inflate with great

force. Do not place your device or accessories in the air bag

deployment area.

Implanted medical devices

Manufacturers of medical devices recommend a minimum

separation of 15.3 centimetres (6 inches) between a

wireless device and an implanted medical device, such as

a pacemaker or implanted cardioverter defibrillator, to

avoid potential interference with the medical device.

Persons who have such devices should:

•

Always keep the wireless device more than 15.3

centimetres (6 inches) from the medical device.

Switch off your device before boarding an aircraft. The use

of wireless teledevices in an aircraft may be dangerous to

the operation of the aircraft and may be illegal.

•

Not carry the wireless device in a breast pocket.

Hold the wireless device to the ear opposite the

medical device.

Potentially explosive environments

•

Turn the wireless device off if there is any reason to

suspect that interference is taking place.

Switch off your device in any area with a potentially

explosive atmosphere. Obeyallpostedinstructions. Sparks

in such areas could cause an explosion or fire resulting in

bodily injury or death. Switch off the device at refuelling

points such as near gas pumps at service stations. Observe

restrictions in fuel depots, storage, and distribution areas;

chemical plants; or where blasting operations are in

progress. Areas with a potentially explosive atmosphere

are often, but not always, clearly marked. They include

areas where you would be advised to turn off your vehicle

engine, below deck on boats, chemical transfer or storage

facilities and where the air contains chemicals or particles

Follow the manufacturer directions for the

implanted medical device.

If you have any questions about using your wireless device

with an implanted medical device, consult your health

care provider.

Additional safety information 69

such as grain, dust, or metal powders. You should check

with the manufacturers of vehicles using liquefied

petroleum gas (such as propane or butane) to determine

if this device can be safely used in their vicinity.

may be the only means of communication at the scene of

an accident. Do not end the call until given permission to

do so.

Certification information (SAR)

Emergency calls

This mobile device meets guidelines for exposure to

radio waves.

Important: This device operates using radio signals,

wireless networks, landline networks, and user-

Your mobile device is a radio transmitter and receiver. It

is designed not to exceed the limits for exposure to radio

waves recommended by international guidelines. These

guidelines were developed by the independent scientific

organisation ICNIRP and include safety margins designed

to assure the protection of all persons, regardless of age

and health.

programmed functions. If your device supports voice calls

over the internet (internetcalls), activateboth theinternet

calls and the cellular phone. The device may attempt to

make emergency calls over both the cellular networks and

through your internet call provider if both are activated.

Connections in all conditions cannot be guaranteed. You

should never rely solely on any wireless device for

essential communications like medical emergencies.

The exposure guidelines for mobile devices employ a unit

of measurement known as the Specific Absorption Rate or

SAR. The SAR limit stated in the ICNIRP guidelines is 2.0

watts/kilogram (W/kg) averaged over 10 grams of tissue.

Tests for SAR are conducted using standard operating

positions with the device transmitting at its highest

certified power level in all tested frequency bands. The

actual SAR level of an operating device can be below the

maximum value because the device is designedto use only

the power required to reach the network. That amount

changes depending on a number of factors such as how

close you are to a network base station.

To make an emergency call:

If the device is not on, switch it on. Check for

adequate signal strength. Depending on your

device, you may also need to complete the

following:

•

Insert a SIM card if your device uses one.

Remove certain call restrictions you have

activated in your device.

•

Change your profile from Offline or Flight

profile to an active profile.

The highest SAR value under the ICNIRP guidelines for use

of the device at the ear is 0.73 W/kg.

Press the end key as many times as needed to clear

the display and ready the device for calls.

Use of device accessories may result in different SAR

values. SAR values may vary depending on national

reporting and testing requirements and the network

band. Additional SAR information may be provided under

product information at www.nokia.com.

Enter the official emergency number for your

present location. Emergency numbers vary by

location.

Press the call key.

When making an emergency call, give all the necessary

information as accurately as possible. Your wireless device

70 Index

Index

—

saving

access codes

alarm clock

11 data cable

60 dialling shortcuts

31 digital rights

53 display

23, 30

anykey answer

applications

12, 22

downloads

barring password

battery

6, 8 e-mail

39, 41

browser

51 e-mail, attachments

59 e-mail, creating

business cards

e-mail, reading and replying to

equaliser

cache memory

calculator

call divert

call log

31 factory settings, restoring

31 file management

32 flash messages

32 Flight profile

29 flight profile

43 font size

call waiting

caller id

calls

camera

camera settings

chat services (IM)

configuration

contacts

28 games

GPS (global positioning system)

—

groups

Index 71

handsfree

headset

31 mail

mail setup

, 56, 57

help text

20 Maps

home screen

13 , 22 media player

memory

45, 46, 47, 48

memory card

37 message centre number

IM (instant messaging) 37, 38, 39,

message sending

message settings

messages

images

43 , 44

in-call timer

inbox, messages

indicators

microSD card

music

12 , 14

music player

My Nokia

46, 47, 48

info messages

instant messaging

internet

navigation

navigation tools

nokia software updater

keyguard

keypad lock

keys

15 , 19

Nokia support information

notes

number mode

language settings

lights

offline mode

location information

loudspeaker

online sharing

operator menu

72 Index

software update

software updates

speed dialling

stereo widening

stopwatch

17, 20

PC Suite

23, 30, 32

photographs

PictBridge

strap

position log

predictive text input

printing

support resources

profiles

text modes

PUK

themes

tones

20, 22

traditional text input

transferring, files

radio

48, 49 , 50

redial

restoring settings

updates

UPIN

screen saver

scrolling

USB data cable

security code

security module

security settings

service commands

sharing

video

43, 44

voice clarity

voice commands

voice dialling

voice recorder

shortcuts

13, 22

SIM

—

services

6, 15

SIM card

wallpaper

SIM messages

Index 73

web

write text

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this RM-540

product is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity can be found at

http://www.nokia.com/phones/

Java and all Java-basedmarksaretrademarksor registered

trademarks of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent

Portfolio License (i) for personal and noncommercial use

in connection with information which has been encoded

in compliance with the MPEG-4 Visual Standard by a

consumer engaged in a personal and noncommercial

activity and (ii) for use in connection with MPEG-4 video

provided by a licensed video provider. No license is

granted or shall be implied for any other use. Additional

information, including that related to promotional,

internal, and commercial uses, may be obtained from

MPEG LA, LLC. See http://www.mpegla.com.

declaration_of_conformity/.

Nokia, Nokia Connecting People, XpressRadio,

XpressMusic, and Navi are trademarks or registered

trademarks of Nokia Corporation. Nokia tune is a sound

mark of Nokia Corporation. Other product and company

names mentioned herein may be trademarks or

tradenames of their respective owners.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS

LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR

INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR

INDIRECT DAMAGES HOWSOEVER CAUSED.

Reproduction, transfer, distribution, or storage of part or

all of the contents in this document in any form without

the prior written permission of Nokia is prohibited. Nokia

operates a policy of continuous development. Nokia

reserves the right to make changes and improvements to

any of the products described in this document without

prior notice.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS".

EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES

OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,

RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA

RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR

WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

The availability of particular products and applications

and services for these products may vary by region. Please

check with your Nokia dealer for details and availability of

Includes RSA BSAFE cryptographic or security protocol

software from RSA Security.

language options. This device may contain commodities,

technology or software subject to export laws and

regulations from the US and other countries. Diversion

contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for

example, when using a telephone in close proximity to

receiving equipment). The FCC or Industry Canada can

require you to stop using your telephone if such

interference cannot be eliminated. If you require

assistance, contact your local service facility. This device

complies with part 15 of the FCC rules. Operation is subject

to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must

accept any interference received, including interference

that may cause undesired operation. Any changes or

modifications not expressly approved by Nokia could void

the user's authority to operate this equipment.

Model number: X3-00

/Issue 1 EN

Toshiba TRANSMEMORY U2M 004GT User Manual
Toastmaster TCM4B User Manual
Seagate ST9120823AS User Manual
Seagate SAVVIO ST973401FC User Manual
Seagate Barracuda ST320DM000 User Manual
Samsung SW 208 User Manual
Samsung GT S7500 User Manual
Samsung GT S5230 User Manual
Pioneer PD M455 User Manual
Pioneer PD D9 J User Manual