Samsung GH68 03299A User Manual

DUAL BAND  
GSM TELEPHONE  
SGH-T400  
OWNERS MANUAL  
ELECTRONICS  
Printed in Korea  
Code No.: GH68-03299A  
English. 2003/01. Rev.1.0  
GLOBAL SYSTEMS FOR  
MOBILE COMMUNICATIONS  
Contents(continued)  
Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . . . . . . 74  
Melody Composer (Menu 4-2) . . . . . . . . . . . . . . . . . 75  
Ring Volume (Menu 4-3) . . . . . . . . . . . . . . . . . . . . . . 77  
Alert Type (Menu 4-4) . . . . . . . . . . . . . . . . . . . . . . . . 77  
Keypad Tone (Menu 4-5). . . . . . . . . . . . . . . . . . . . . . 78  
Message Tone (Menu 4-6) . . . . . . . . . . . . . . . . . . . . 78  
Power On/Off (Menu 4-7) . . . . . . . . . . . . . . . . . . . . . 78  
Error Tone (Menu 4-8). . . . . . . . . . . . . . . . . . . . . . . . 79  
Minute Minder (Menu 4-9). . . . . . . . . . . . . . . . . . . . 79  
Connect Tone (Menu 4-10) . . . . . . . . . . . . . . . . . . . . 79  
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Changing the Text Input Mode . . . . . . . . . . . . . . . . 45  
Using the T9 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Using the ABC Mode . . . . . . . . . . . . . . . . . . . . . . . . 48  
Using the Number Mode . . . . . . . . . . . . . . . . . . . . . 50  
Using the Symbolic Mode . . . . . . . . . . . . . . . . . . . . 50  
Selecting Functions and Options . . . . . . . . . . . . . 51  
Using the Menus . . . . . . . . . . . . . . . . . . . . . . . 53  
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Call Records . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . . . . . . . 57  
Received Calls (Menu 1-2) . . . . . . . . . . . . . . . . . . . . 57  
Dialled Calls (Menu 1-3) . . . . . . . . . . . . . . . . . . . . . . 58  
Call Time (Menu 1-4) . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80  
Phone Settings (Menu 5-1). . . . . . . . . . . . . . . . . . . . 80  
Network Services (Menu 5-2) . . . . . . . . . . . . . . . . . 86  
Security Settings (Menu 5-3) . . . . . . . . . . . . . . . . . . 95  
LCD/LED Settings (Menu 5-4). . . . . . . . . . . . . . . . . . 98  
Browser Settings (Menu 5-5). . . . . . . . . . . . . . . . . . 100  
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . . . . . . . 60  
Read Messages (Menu 2-2) . . . . . . . . . . . . . . . . . . . 61  
Write Messages (Menu 2-3) . . . . . . . . . . . . . . . . . . . 63  
Preset Message List (Menu 2-4) . . . . . . . . . . . . . . . 64  
Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . . . . . . . 65  
Picture Messages (Menu 2-7) . . . . . . . . . . . . . . . . . 67  
Organiser . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
Scheduler (Menu 6-1). . . . . . . . . . . . . . . . . . . . . . . . 101  
Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . 103  
Calculator (Menu 6-3). . . . . . . . . . . . . . . . . . . . . . . . 105  
To Do List (Menu 6-4) . . . . . . . . . . . . . . . . . . . . . . . . 107  
Calendar (Menu 6-5) . . . . . . . . . . . . . . . . . . . . . . . . . 108  
World Time (Menu 6-6) . . . . . . . . . . . . . . . . . . . . . . . 109  
Clock (Menu 6-7). . . . . . . . . . . . . . . . . . . . . . . . . . . . 110  
Conversion (Menu 6-8) . . . . . . . . . . . . . . . . . . . . . . . 111  
Timer (Menu 6-9). . . . . . . . . . . . . . . . . . . . . . . . . . . . 113  
Stopwatch (Menu 6-10) . . . . . . . . . . . . . . . . . . . . . . 114  
Voice Functions . . . . . . . . . . . . . . . . . . . . . . . . 69  
Voice Dial (Menu 3-1) . . . . . . . . . . . . . . . . . . . . . . . . 69  
Voice Command (Menu 3-2) . . . . . . . . . . . . . . . . . . . 72  
Voice Memo (Menu 3-3) . . . . . . . . . . . . . . . . . . . . . . 72  
4
5
Contents(continued)  
Important Safety  
Precautions  
Read these guidelines before using your wireless  
phone. Failure to comply with them may be dange-  
rous or illegal. For more detailed safety information,  
see “Health and Safety Information” on page 132.  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115  
Bowling (Menu 7-1). . . . . . . . . . . . . . . . . . . . . . . . . 116  
Speed Up (Menu 7-2) . . . . . . . . . . . . . . . . . . . . . . . 116  
Honey Ball (Menu 7-3) . . . . . . . . . . . . . . . . . . . . . . 117  
WWW Services . . . . . . . . . . . . . . . . . . . . . . . . 119  
Home (Menu 8-1). . . . . . . . . . . . . . . . . . . . . . . . . . . 119  
Bookmark (Menu 8-2) . . . . . . . . . . . . . . . . . . . . . . . 120  
Goto (Menu 8-3). . . . . . . . . . . . . . . . . . . . . . . . . . . . 121  
Navigating with the WAP Browser . . . . . . . . . . . . 121  
Entering Text, Numbers or Symbols . . . . . . . . . . . 123  
Road Safety at All Times  
Do not use a hand-held phone while driving; park the  
vehicle first.  
Switching Off When Refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Additional Services . . . . . . . . . . . . . . . . . . . . 124  
ALS (Alternate Line Service) . . . . . . . . . . . . . . . . . 124  
Switching Off in Aircraft  
Solving Problems . . . . . . . . . . . . . . . . . . . . . . 126  
Wireless phones can cause interference. Using them  
in aircraft is both illegal and dangerous.  
Reference Information . . . . . . . . . . . . . . . . . . 129  
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129  
Health and Safety Information . . . . . . . . . . . . . . . 132  
Switching Off in Hospitals  
Switch off your phone near medical equipment.  
Follow any rules or regulations in force.  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145  
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149  
Quick Reference Card . . . . . . . . . . . . . . . . . . . 153  
Interference  
All wireless phones may be subject to interference,  
which may affect their performance.  
Special Regulations  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is forbid-  
den to use it, or when it may cause interference or  
danger (in a hospital for example).  
6
7
Im p o rt a n t S a f e t y P re c a u t io n s  
Unpacking  
Your package contains the following items.  
Radio Frequency Exposure  
The design of this phone complies with European  
Union (EU) requirements relating to radio frequency  
(RF) exposure. To maintain compliance with these  
requirements, use only Samsung-supplied or  
approved accessories. Use of non-approved  
accessories may violate the requirements.  
Sensible Use  
Use only in the normal position (held to the ear).  
Avoid unnecessary contact with the antenna when  
the phone is switched on.  
Hand Strap  
Phone  
Travel Adapter  
Batteries  
Accessories and Batteries  
Use only Samsung-approved accessories and  
batteries.  
Wearable  
Ear-Microphone  
Battery Charger  
Owners Manual  
Qualified Service  
Only qualified service personnel may install or repair  
your phone.  
In addition, you can obtain the following accessories  
for your phone from your local Samsung dealer:  
Cigarette lighter adapter Content download kit  
Car cradle  
• Simple hands-free kit  
Data kit  
• Standard battery  
Note: There is a rubber dust cover fitted to the  
connector on the bottom of the phone for  
protection during shipment. When unpacking  
the product, remove this cover and dispose of  
it along with any other unwanted packaging.  
8
9
Yo u r P h o n e  
Your Phone  
Closed View  
Phone Layout  
The following illustrations show the main elements  
of your phone.  
Antenna  
Service light  
Open View  
Earpiece  
External display  
Display  
Volume  
During a call,  
adjust the  
earpiece volume.  
In idle mode with  
the phone open,  
adjust the key  
volume.  
When held down  
with the phone  
closed, reject an  
incoming call.  
Key Description  
Perform the functions indicated by the text  
above them (on the bottom line of the  
display).  
(soft keys)  
In the menu facility, scroll through the  
menu options and phonebook memory.  
In idle mode,  
the Messages menu,  
access the Ring Tone menu.  
allows you to access  
allows you to  
Microphone  
10  
11  
Yo u r P h o n e  
Yo u r P h o n e  
Display  
Display Layout  
Key Description (continued)  
The display comprises three areas.  
Deletes characters from the display.  
In idle mode, launches the WAP Browser  
directly.  
Icons  
Makes or answers a call.  
In idle mode, recalls the last number dialled,  
received or missed.  
Text and  
graphic area  
In the menu facility, selects a menu function  
or stores information that you have entered  
(such as a name) in the phone or SIM  
memory.  
Menu  
PhoneBook  
Soft keys  
Ends a call. When held down, switches the  
phone on and off.  
In the menu facility, cancels your input and  
returns to the idle mode.  
Area  
First line  
Description  
Displays various icons (see page 14).  
When held down in idle mode, accesses  
your voice mail.  
Middle lines Display messages, instructions and  
any information that you enter  
Enter numbers, letters and some special  
characters.  
(number to be dialled, for example).  
Last line  
Shows the functions currently  
assigned to the two soft keys.  
Used for various purposes in different  
functions.  
When held down while entering a number,  
enters a pause.  
When held down in idle mode,  
activates/deactivates the silent mode.  
12  
13  
Yo u r P h o n e  
Yo u r P h o n e  
Icons  
Backlight  
The display and keypad are illuminated by a  
backlight. When you press any key, the backlight  
illuminates. It turns off if no key is pressed within a  
given period of time, depending on the Backlight  
option set in the Phone Settings menu. The  
backlight remains on at all times when the phone is  
connected to an optional car kit.  
Shows the received signal strength. The  
greater the number of bars, the stronger  
the signal.  
Appears when a call is in progress.  
To specify the length of time for which the backlight  
is active, set the Backlight menu option; see  
page 82 for further details.  
Appears when the phone can not find a  
signal.  
Appears when a new text message has  
been received.  
External Display  
Appears when a new voice mail message  
has been received.  
Your phone has an external display on the cover,  
showing the signal strength and battery strength. It  
indicates that you have an incoming call or message,  
notifies you of any missed calls, indicates whether  
the vibrate mode is on and notifies you at the  
specified time when you set an alarm.  
Appears when the vibrate mode is on;  
the phone vibrates rather than rings  
when you receive a call.  
Appears when you set an alarm.  
When you hold down one of the volume keys in idle  
mode with the phone closed, the external display  
backlight illuminates.  
Shows the level of your battery. The  
more bars you see, the more power you  
have left.  
14  
15  
Yo u r P h o n e  
Getting Started  
Installing the SIM Card and the Battery  
Service Light  
When you subscribe to a cellular network, you are  
provided with a SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available and so on.  
The service light is in the top right-hand corner of the  
phone. It flashes when services are available on the  
phone.  
To activate or deactivate use of the service light, set  
the Service Light menu option; see page 83 for  
further details.  
Keep all miniature SIM cards out of the reach of  
small children.  
The SIM card and its contacts can easily be  
damaged by scratches or bending, so be careful  
when handling, inserting or removing the card.  
Before installing the SIM card, always make sure  
that the phone is switched off before you remove  
the battery.  
Service light  
1. If necessary, switch off the phone by holding  
down  
until the closing animation is  
displayed.  
2. Push the catch above the battery on the back of  
the phone and hold it in this position. Lift the  
battery away.  
16  
17  
Ge t t in g S t a rt e d  
Ge t t in g S t a rt e d  
3. Insert and slide the SIM card under the two tabs,  
ensuring that the notched corner is top left and  
the gold contacts of the card face into the phone.  
Charging a Battery  
Your phone is powered by a rechargeable Li-ion  
battery. Use only approved batteries and chargers.  
Ask your local Samsung dealer for further details.  
Note: You must fully charge the battery before using  
your phone for the first time. A discharged  
standard battery is fully recharged in  
approximately 160 minutes.  
Using a Travel Adapter  
The phone can be used while the battery is charging.  
4. Place the battery back on the phone. First insert  
the teeth on the bottom of the battery into the  
corresponding slots, then push the battery against  
the back of the phone until it clicks into place.  
Make sure that the battery is properly installed  
before switching the phone on.  
1. Connect the travel adapter connector into the  
bottom of the phone. Check that the arrow on  
the lead connector is facing towards the front of  
the phone.  
18  
19  
Ge t t in g S t a rt e d  
Ge t t in g S t a rt e d  
Low Battery Indicator  
When the battery is weak and only a few minutes of  
talk time remain, the battery sensor informs you in the  
2. Connect the adapter to a standard AC wall outlet.  
When the battery is charging, the battery icon  
in the top right-hand corner of the display fills  
repeatedly.  
following ways: an empty battery icon flashes (  
),  
you hear a warning tone and a message is repeated at  
regular intervals on the display. When the battery  
becomes too weak for the phone to operate, it  
switches off automatically.  
3. When charging is finished, disconnect the adapter  
from the power outlet, and from the phone by  
pressing the grey tabs on both sides of the  
connector and pulling the connector out.  
20  
21  
Ge t t in g S t a rt e d  
Ge t t in g S t a rt e d  
Switching the Phone On/ Off  
Note: The display language is determined by the SIM  
card inserted. To change the language, use the  
Language menu option; for further details, refer  
to page 81.  
1. Open the phone.  
2. Hold down  
until the phone switches on.  
3. If the phone asks for a password, key in the  
password and press the OK soft key. The  
password is factory set to 0000. For further  
details, see page 129.  
5. When you wish to switch the phone off, hold  
down  
until the power-off animation is displayed.  
Using the Ear-Microphone  
4. If the phone asks for a PIN, key in the PIN and  
press the OK soft key. For further details, see  
page 130.  
With the ear-microphone supplied with your phone, you  
can make or answer a call without holding the phone.  
When you connect the ear-microphone to the jack  
above the volume keys, the button on the ear-  
microphone will operate as listed below.  
When the phone has registered with an approved  
network provider, the idle screen, illustrated  
below, is displayed on the main and external  
displays.  
To...  
Then press the button...  
Twice in idle mode.  
Redial the last call  
Answer a call  
End a call  
When you receive the call.  
When you have finished the  
call.  
< Se rv ic e Pro v id e r>  
Au g 1 4 We d  
1 0 :2 9  
We d 0 8 / 1 4  
1 0 :2 9  
Note: You can use the voice dialling or voice command  
features by pressing the button, if the Active  
Folder menu option is set to Voice Dial or Voice  
Command. For further details, refer to page 84.  
External display  
Me n u  
Ph o n e Bo o k  
Main display  
22  
23  
Ca ll Fu n c t io n s  
Call Functions  
Making a Call  
Ending a Call  
When the idle screen is displayed, key in the area  
code and phone number and press  
.
When you have finished your call, briefly press  
.
Note: If you have set the Auto Redial option to ON  
(see page 83) and the person called does not  
answer or the line is busy, the number is  
redialled automatically up to ten times.  
Making a Call from the Phonebook  
You can store the names and phone numbers called  
regularly in the SIM card and phone memories,  
which are jointly called the phonebook. You then do  
not need to remember all your numbers; simply  
select the required name to recall the associated  
Making an International Call  
1. Press and hold down  
for the international  
prefix. The + character appears.  
number. For further details on the Phonebook feature,  
refer to page 37.  
2. Key in the country code, area code and phone  
number and press  
.
Voice Dialling  
Correcting the Number  
If you have set the Active Folder option to Voice  
Dial (see page 84), your phone also allows you to  
say a name when you open the phone. It then  
automatically dials the number stored with that  
name. For further details on the Voice Dialling  
feature, refer to page 69.  
To clear...  
Then...  
The last digit  
displayed  
Press the ❙ꢀsoft key.  
Any other digit  
in the number  
Press  
until the cursor  
( ) is immediately to the right  
of the digit to be cleared.  
Press the ❙ꢀsoft key.  
You can also insert a missing  
digit simply by pressing the  
appropriate key.  
Redialling the Last Number  
The phone stores the last 15 numbers dialled,  
received or missed. To recall any of these numbers,  
proceed as follows.  
The whole display Hold down the ❙ꢀsoft key for  
1. If there are any characters on the display,  
more than one second.  
press  
to return to the idle mode.  
24  
25  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
Answering a Call  
2. Access the list of numbers by pressing  
.
When somebody calls you, the phone rings and the  
icon indicating the call is animated in the middle of  
the screen. If the caller can be identified, the callers  
phone number or name, if stored in your phonebook,  
is displayed.  
3. Use  
or  
to scroll through the list of  
numbers until the required number is highlighted.  
4. To dial the number, press  
.
1. To answer a call, open the phone. If the phone is  
already open, press  
or the Accept soft key.  
Adjusting the Volume  
If the Any-key Answer menu option is set to ON,  
you can press any key to answer a call, except  
During a call, if you wish to adjust the earpiece  
volume, use the volume keys on the left side of the  
phone.  
for  
Note:To reject an incoming call, press the Reject  
soft key or When the phone is closed,  
and the Reject soft key (see page 82).  
.
Press to increase and to decrease the volume.  
hold down the volume key on the left side of  
the phone.  
2. End the call by closing the phone or pressing  
.
Note: You can answer a call while using the  
phonebook or menu features.  
In idle mode with the phone open, you can adjust the  
key volume using the same keys.  
26  
27  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
Viewing Missed Calls  
If you have a subscription that includes the Caller Line  
Identification (CLI) feature and you are unable to  
answer a call for any reason, you can find out who was  
calling you and then call the person back, if necessary.  
Editing a Missed Call Number  
1. Press the Options soft key.  
2. Press the Select soft key.  
The number of missed calls is displayed on the idle  
screen immediately after a call was missed.  
3. Change the number as required. Press  
to move back through the number.  
or  
To view the missed call immediately, proceed as  
follows.  
4. To...  
Call the number  
Then press...  
.
1. If the phone is closed, open it.  
Store the number  
The Save soft key and enter  
the name and location  
required (for further details,  
refer to page 37).  
2. Press the View soft key.  
The number corresponding to the most recent  
missed call is displayed, if available.  
Deleting a Missed Call  
3. To...  
Scroll through the  
Then press...  
or  
1. Press the Options soft key.  
2. Press or to highlight the Delete option.  
3. Press the Select soft key.  
.
missed calls  
Call the number displayed  
.
Edit or delete a missed  
call number  
The Options soft key  
(see the following  
paragraphs).  
You can press  
feature.  
at any time to exit the Missed Call  
Note: You can access the Missed Call feature at any  
time by selecting the Missed Calls menu option;  
for further details, see page 57.  
28  
29  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
In-Call Options  
Your phone provides a number of control functions  
that you can use during a call. To access these  
functions during a call, press the Options soft key.  
Searching for a Number in the Phonebook  
You can search for a number in the phonebook during  
a call.  
Switching the Microphone Off (Mute)  
1. Press the Options soft key.  
You can temporarily switch your phones microphone  
off, so that the other party cannot hear you.  
2. Press  
option.  
or  
to highlight the PhoneBook  
Example: You wish to say something to another  
person in the room but do not want the  
calling party to hear you.  
3. Press the OK soft key.  
4. Enter the first few letters of the name that you  
want to find and press the Find soft key.  
To switch the microphone off temporarily, proceed as  
follows.  
Note: You can also scroll through the phonebook  
from the beginning, by pressing the Find  
soft key directly.  
1. Press the Options soft key.  
2. Press  
or  
to highlight the Mute option.  
The phonebook entries are listed, starting with  
the first entry matching your input. This entry is  
also highlighted.  
3. Press the OK soft key.  
Your correspondent can no longer hear you.  
5. To review the highlighted entry, press the View  
To switch the microphone back on, proceed as  
follows.  
soft key.  
For a more detailed description of the Phonebook  
feature, refer to page 37.  
1. Press the Options soft key.  
2. Press  
option.  
or  
to highlight the Unmute  
3. Press the OK soft key.  
Your correspondent can hear you again.  
30  
31  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
Putting a Call on Hold  
Answering a Second Call  
You can place the current call on hold whenever you  
want. You can make another call while you have a  
call in progress if this service is supported by the  
network. Of these two calls, one is active and the  
other is on hold and you can swap between the calls.  
You can answer an incoming call while you have a  
call in progress, if this service is supported by the  
network and if you have activated the Call Waiting  
menu option; see page 91. You will be notified of an  
incoming call by a call waiting tone.  
To place a call on hold, press the Options soft key,  
and select the Hold option. You can reactivate the  
call whenever you want, by pressing the Retrieve  
soft key.  
To answer a call while you have a call in progress,  
proceed as follows.  
1. Press  
to answer the incoming call.  
The first call is automatically put on hold.  
To make a call while you have a call in progress,  
proceed as follows.  
2. To switch between the two calls, press the Swap  
1. Key in the phone number that you wish to dial or  
look it up in the phonebook.  
soft key.  
To end a held call, press the Options soft key and  
select the End held option.  
2. Press  
to dial the second call.  
The first call is automatically put on hold.  
3. To end the current call, press  
.
Or alternatively, proceed as follows.  
Any held calls will automatically be reconnected  
to you.  
1. Put the current call on hold by pressing the  
Options soft key and selecting the Hold option.  
2. Make the second call in the normal way.  
To swap between the two calls, simply press the  
Swap soft key.  
The current call is placed on hold and the call on  
hold is reactivated so that you can continue  
conversing with the other party.  
When you have finished, end each call normally by  
pressing  
.
32  
33  
Ca ll Fu n c t io n s  
Ca ll Fu n c t io n s  
Making a Multiparty Call  
2. Highlight the required person, by pressing  
or , and then press  
A multiparty call is a network service that allows  
up to six people to take part simultaneously in a  
multiparty or conference call. For more information,  
contact your service provider.  
.
3. Select Private.  
Now you can talk privately with that person. The  
other participants can continue to converse with  
each other.  
Setting Up the Multiparty Call  
1. Call the first participant in the normal way.  
4. To return to the multiparty call, press the Options  
soft key and select Join.  
2. Call the second participant in the normal way.  
The first call is automatically put on hold.  
All the multiparty call participants can now hear  
each other.  
3. To join the first participant to the multiparty call,  
press the Options soft key and select the Join  
option.  
Dropping One Participant  
1. Press the Options soft key and choose the  
Select One option.  
4. To add a new person to the multiparty call, call  
the person in the normal way. Then press the  
Options soft key and select the Join option.  
The list of call participants appears.  
2. Highlight the required person, by pressing  
You can add incoming callers by answering the call,  
pressing Options and selecting the Join option.  
Repeat as required.  
or  
, followed by  
.
3. Select Remove.  
The call is ended with that participant, but you  
can continue to talk with the other participants.  
Having a Private Conversation With One  
Participant  
4. End the multiparty call by closing the phone or  
1. Press the Options soft key and choose the  
Select One option.  
pressing  
.
The list of call participants appears.  
34  
35  
Ca ll Fu n c t io n s  
Phonebook  
You can store phone numbers and the corresponding  
names in the memory of your SIM card. In addition,  
you can store up to 500 numbers and names in the  
phone memory. The SIM card and phone memories,  
although physically separate, are used as if they were  
a single entity, called the phonebook.  
Muting/ Sending Key Tones  
These options allow you to turn the key tones off or  
on. If the Mute keys option is selected, your phone  
does not transmit the key tones.  
Note: If you change phones, any numbers stored in  
your SIM card are automatically available with  
the new phone, whereas any numbers stored  
in the phone must be stored again.  
Note: To communicate with answering machines or  
computerised telephony systems, the Send  
keys option must be selected.  
Storing a Phone Number with a Name  
Using the SMS Service  
As soon as you start to enter a number, Save appears  
above the left soft key to allow you to store the  
number in the phonebook.  
If you receive an SMS (Short Message Service)  
message during a call, the message icon (  
flashes in the display.  
)
1. Key in the number to be stored.  
Notes:  
Either during your call or after you have finished it,  
you can read the message or send a reply; refer to  
page 60 for further details.  
• If you make a mistake while entering a number,  
correct it using the soft key. For further  
details, refer to page 24.  
To insert a dialling pause for special phone  
services, such as banking by phone, hold  
down  
. Pis displayed to indicate the pause.  
2. When you are sure that the number is correct,  
press the Save soft key.  
3. Enter the associated name.  
The maximum length of a name depends on your  
SIM card. For information on how to enter  
characters, see page 44.  
4. When you are satisfied, press the Save soft key.  
The phone now displays the first free location in  
the SIM card for you to save the number and  
name.  
36  
37  
P h o n e b o o k  
P h o n e b o o k  
If the card memory is full, the first free location in  
the phone memory is displayed.  
The following options are available.  
Voice Record  
5. Press the right soft key to toggle between the phone  
Note: This option appears only when no name has  
(To Phone) and card (To Card) memories.  
been recorded.  
6. If you do not want to save the number and name in  
This option allows you to add a voice tag to the  
number.  
the suggested location, press  
location number and enter your preferred location by  
pressing the number keys.  
to clear the  
Follow the instructions given by your phone to record  
the required name.  
7. Press the OK soft key to store the name and number.  
8. You can access the phonebook options by pressing  
the Options soft key, or scroll through the memory  
Play Voice  
Note: This option appears only when you have  
with  
or  
.
already recorded some names.  
To exit, press  
.
This option plays back the names that you have  
recorded.  
Using the Phonebook Options  
Voice Delete  
Note: This option appears only when you have  
When storing or viewing a number in the phonebook,  
Options appears above the left soft key to allow you to  
access the phonebook options, described in the  
following paragraphs.  
already recorded some names.  
This option allows you to delete a specific voice  
entry.  
You are asked to confirm the deletion by pressing the  
OK soft key.  
Accessing the Options  
To access the various phonebook options, proceed as  
follows.  
Paste  
This option allows you to paste the phonebook  
number into the normal dialling mode. Use this  
option to dial a number similar to one in the  
phonebook (a different extension in the same office,  
for example).  
1. Press the Options soft key.  
The first available option is highlighted.  
2. Scroll to the required option by pressing  
or  
.
Use the ❙ꢀsoft key to change the number as  
required; refer to page 24 for further details. When  
3. Press the Select soft key.  
you are ready to dial, press  
.
38  
39  
P h o n e b o o k  
Phone book
Edit  
Colour  
This option allows you to edit a number and name  
stored in the phonebook.  
This option allows you to assign a specific service light  
colour to a number and thus distinguish the caller by  
the service light colour.  
Four colours are available (normal, orange, violet and  
blue) and they can be assigned to up to twenty numbers.  
If no specific colour is assigned, the service light  
flashes with the colour you set in the Service Colour  
option; see page 99.  
Erase  
This option allows you to erase a number and name  
stored in the phonebook. You are asked to confirm  
that you wish to erase the name and number from  
the phonebook by pressing the Yes soft key.  
Copy  
Speed-Dialling by SIM Memory Location  
This option allows you to copy a phonebook number  
to another location. Use this option to store a  
number similar to one already in memory; once  
copied, edit the number and store it into another  
location on the SIM card or in the phone memory.  
Once you have stored phone numbers in the SIM card,  
you can dial them easily whenever required.  
To speed-dial a number, proceed as follows.  
Memory Status  
To speed-dial a  
Then...  
number in locations...  
This option allows you to check how many names  
and phone numbers are stored and how many  
locations are still free in the card and phone  
memories.  
2 to 9  
Press and hold down the  
appropriate key.  
10 and above  
Press the appropriate keys,  
Alert  
followed by  
.
This option allows you to assign specific ring tones  
to up to twenty numbers and thus distinguish the  
caller by the ring tone.  
When the display shows the  
name, phone number and  
location, press the Dial soft  
key.  
Note: Memory location 1 is reserved for your Voice  
Mail server number.  
40  
41  
P h o n e b o o k  
P h o n e b o o k  
Dialling a Number Using the Service  
Directory or Information Numbers  
Searching for and Dialling a Number in  
the Phonebook  
Note: The Service Dir. and Information Numbers  
options may not be available, depending on  
your SIM card.  
1. When the idle screen is displayed, press the  
PhoneBook soft key.  
2. If your SIM card provides Service Dialling Number  
(SDN) and Information Number services, press the  
OKsoft key when the Find Entry option is  
highlighted.  
When the idle screen is displayed, press the  
PhoneBook soft key, then you can select one of the  
services.  
3. Enter the start of the name that you wish to find  
Service Dir.: enables you to view the Service  
Directory and make calls from it.  
and press the Find soft key.  
Note: You can also scroll through the phonebook  
from the beginning, by pressing the Find soft  
key directly.  
Information Numbers: enables you to see the  
Information Numbers in a tree structure and make  
a call.  
The phonebook entries are listed, starting with the  
first entry matching your input. This entry is also  
highlighted.  
4. To...  
View the  
Then press...  
The View soft key.  
highlighted entry  
Select a  
or  
one or  
different entry  
more times until the required  
entry is highlighted.  
Look for a name  
starting with a  
different letter  
The key labelled with the  
required letter.  
5. Once you have found the required entry, press  
to dial the number.  
42  
43  
En t e rin g Te xt  
Entering Text  
Changing the Text Input Mode  
When storing a name in the phonebook, creating your  
personal greeting or scheduling events in your calendar,  
you will need to enter text.  
When you are in a field that allows characters to be  
entered, you will see the text input mode indicator at  
the bottom of the display.  
You are provided with the following text input modes.  
To change to another text input mode, proceed as  
follows.  
T9 Mode  
This mode allows you to enter words with only one  
keystroke per letter. Each key on the keypad has more  
than one letter – when you press  
1. Press the right soft key, indicating the current text  
input mode.  
once, J, K or L  
may be displayed. The T9 mode automatically compares  
your keystrokes with an internal linguistic dictionary to  
determine the correct word, thus requiring far fewer  
keystrokes than the traditional ABC mode.  
2. Scroll to the required mode, by pressing  
or  
.
Note: If you want to exit the menu without  
changing the mode, press the  
soft key.  
ABC Mode  
This mode allows you to enter letters by pressing the  
key labelled with the required letter once, twice, three  
or four times until the letter is displayed.  
3. Press the Select soft key to select the highlighted  
text input mode.  
The selected text input mode is indicated on the  
bottom line of the display.  
Number Mode  
This mode allows you to enter numbers.  
Symbolic Mode  
This mode allows you to enter special characters.  
is a registered trademark of Tegic Communications, Inc. and  
is licensed under U.S. Patent 5,818,437/5,953,541/  
6,011,554.  
44  
45  
En t e rin g Te xt  
En t e rin g Te xt  
Using the T9 Mode  
Smart Punctuation  
To type a word, proceed as follows.  
To enter periods, hyphens or apostrophes, press  
The T9 mode applies rules of grammar to insert the  
correct punctuation.  
.
1. Start entering the word by pressing keys  
to  
. Press each key only once for each letter.  
Example: The  
key is used twice to display two  
Example: To enter Hello in the T9 mode, press  
and  
punctuation marks.  
,
,
,
.
The word you are typing appears in the display. It  
may change with each key that you press.  
l
e
t
s
e
a
t
.
2. Enter the whole word before editing or deleting  
any keystrokes.  
Changing the Case  
To change the case of the next letter(s) that you type,  
press . There are three case states:  
Lower Case  
Initial Capitals  
Capital Lock  
3. If the word is correct, start entering the next word.  
Otherwise, press  
repeatedly to display other  
word choices for the keys that you have pressed.  
Example: Both ofand mehave the sequence  
and  
. The phone displays the  
Scrolling  
most commonly used choice first.  
To move the cursor to the left or right within the  
4. Complete each word with a space by pressing  
.
text, press  
To scroll through other word choices for the keys  
you have entered, press  
or  
.
.
To type words not found in the T9 mode, change the  
text input mode to the ABC mode.  
Clearing Letters and Words  
To clear letters to the left of the cursor, press  
one or more times. To erase entire words, hold  
down  
.
46  
47  
En t e rin g Te xt  
En t e rin g Te xt  
Using the ABC Mode  
The cursor moves to the right when you press a  
different key. When entering the same letter twice or  
a different letter on the same key, just wait a few  
seconds for the cursor to move right automatically,  
and then enter the next letter.  
When typing in the ABC mode, press the key labelled  
with the required letter:  
Once for the first letter  
Twice for the second letter  
And so on  
Changing the Case  
Example: To display the letter C, quickly press  
three times. To display the letter K,  
To change the case of the next letter(s) that you type,  
press  
twice. This method is called  
press  
. There are three case states:  
Multi-tap typing.  
Lower Case  
Initial Capitals  
Capital Lock  
Refer to the table below for more information on the  
characters available.  
Inserting a Space  
Key  
Characters in the Order Displayed  
To insert a space between each word, press  
.
Upper Case  
Lower Case  
:
;
¿ ¡ 1 = /  
.
,
? ! 1 -  
@ :  
1
2
3
4
5
6
7
8
9
0
A B C 2 Ä Æ Å Γ  
D E F 3 É ∆  
G H I 4 Θ  
a b c 2 à ä æ å Ç  
Scrolling  
d e f 3 é  
è
To move the cursor to the left or right within the text,  
press or  
g h i 4 ì  
.
J K L 5 Λ  
j
k l  
5
M N O 6 Ñ Ö Ø Ξ  
P Q R S 7 Π Σ  
T U V 8 Ü Φ  
WX Y Z 9 Ψ Ω  
0 x < > % # £  
m n o 6 ñ ò ö ø  
p q r s 7 ß  
Clearing Letters and Words  
t
u v 8 ù ü  
w x y z 9  
0 + ( & _ $  
To clear letters to the left of the cursor, press  
one or more times. To erase entire words, hold  
)
down  
.
48  
49  
En t e rin g Te xt  
Selecting Functions  
and Options  
Using the Number Mode  
Your phone offers a set of functions that allow  
you to customise your phone. These functions are  
arranged in menus and sub-menus, accessed via the  
two soft keys marked and . Each menu and sub-  
menu allows you to view and alter the settings of a  
particular function.  
The Number mode enables you to enter numbers.  
Press the keys corresponding to the required digits  
before manually switching back to the appropriate text  
input mode.  
The roles of the soft keys vary according to the current  
context; the label on the bottom line of the display just  
above each key indicates its current role.  
Using the Symbolic Mode  
The Symbolic mode enables you to insert symbols in a  
text message.  
Example:  
To...  
Then press ...  
Display more symbols  
Enter a given symbol  
.
<Se rvice Provide r>  
Au g 1 4 We d  
1 0 :2 9  
The corresponding key.  
The phone automatically switches back to the text  
input mode used immediately prior to selecting the  
Symbolic mode.  
Me n u Pho ne Bo o k  
Press the left soft key  
to access the menu  
functions.  
Press the right soft  
key to access the  
Phonebook feature.  
50  
51  
S e le c t in g Fu n c t io n s a n d Op t io n s  
Using the Menus  
To view the various functions/options available and  
select the one required, proceed as follows.  
The phone offers a range of functions that allow you  
to tailor the phone to your needs. These functions are  
arranged in menus and sub-menus.  
1. Press the appropriate soft key.  
The menus and sub-menus can be accessed by  
scrolling with the navigation keys.  
2. To...  
Select the:  
Then press...  
1. In idle mode, press the Menu soft key to access  
The left soft key.  
the menu facility. Scroll with  
or  
to reach  
Function displayed  
or  
the required main menu, such as Tones.  
Option highlighted  
2. If tmenu contains any sub-menus, Ring Tone  
for ample, find the one you want by scrolling  
View the next function  
or highlight the next  
option in a list  
.
.
with  
or  
. Press the Select soft key to  
enter the sub-menu.  
If the menu you have selected contains further  
options, repeat this step.  
Move back to the  
previous function  
or option in a list  
3. To...  
Scroll through the menus  
Confirm the chosen setting The Select soft key.  
Then press...  
Move back up one  
level in the structure  
The right soft key.  
.
or  
.
Exit the structure  
without changing  
the settings  
Return to the previous  
menu level  
The soft key.  
In some functions, you may be asked for a password  
or PIN. Enter the required code and press  
Exit the menu, without  
changing the settings  
.
.
52  
53  
Us in g t h e Me n u s  
Us in g t h e Me n u s  
Menu Structure  
Main Menu  
Level 1  
Level 2  
3. Voice Functions  
1. Voice Dial  
1. Record  
2. Act  
The various menus let you check or change your phone  
settings. The following illustration shows the menu  
structure.The numbers assigned to each menu option may  
not match the menu number on the phone. It depends on  
the services supported by the SIM.  
3. Delete One  
4. Play All  
5. Delete All  
1. Record  
2. Act  
3. Play All  
4. Delete All  
1. Record  
2. Replay  
3. Delete One  
4. Delete All  
2. Voice Command  
3. Voice Memo  
Note: You can only see menu 0, if your SIM card  
supports the SIM Application Toolkit. This is a  
network feature. Please contact your service  
provider for more information.  
4. Tones  
1. Ring Tone  
2. Melody Composer  
3. Ring Volume  
4. Alert Type  
5. Keypad Tone  
6. Message Tone  
7. Power On/Off  
8. Error Tone  
Main Menu  
1. Call Records  
Level 1  
Level 2  
1. Missed Calls  
2. Received Calls  
3. Dialled Calls  
4. Call Time  
1. Last Call Time  
2. Total Sent  
3. Total Received  
4. Reset Timers  
1. Last Call Cost  
2. Total Cost  
9. Minute Minder  
10. Connect Tone  
1
5. Call Cost  
5. Settings  
1. Phone Settings  
1. Greeting Message  
1
2. Own Number  
3. Language  
3. Max Cost  
4. Reset Counters  
5. Set Max Cost  
6. Price/Unit  
4. Any-key Answer  
5. Backlight  
6. Service Light  
7. Auto Redial  
8. Auto Answer  
9. Caller ID  
2. Messages  
1. Voice Mail  
1. Connect to Voice Mail  
2. Voice Server Number  
2. Read Messages  
3. Write Messages  
4. Preset Message List  
5. Setup  
10. Active Folder  
11. Reset Settings  
1
12. Active Line  
1. Call Diverting  
2. Call Barring  
3. Call Waiting  
1. Service Centre  
2. Default Type  
3. Default Validity  
4. Reply Path  
5. Delivery Report  
1. Read  
2
2. Network Services  
2
2
4. Network Selection  
5. Line Identification  
6. Closed User Group  
2
6. Broadcast  
2. Receive  
3. Channel List  
4. Language  
1
Shown only if supported by your SIM card.  
7. Picture Messages  
2
May not be shown or supported by your network service provider.  
54  
55  
Us in g t h e Me n u s  
Main Menu  
Level 1  
Level 2  
5. Settings  
(continued)  
3. Security Settings  
1. PIN Check  
2. Change PIN  
3. Phone Lock  
4. Change Password  
5. SIM Lock  
6. FDN Mode  
7. Change PIN2  
1
1
4. LCD/LED Settings  
5. Browser Settings  
1. Wallpaper  
2. Main Menu  
3. Skin  
4. LCD Brightness  
5. Service Colour  
6. Graphic Logo  
1. Proxy Settings  
2. Current Proxy  
2
6. Organiser  
1. Scheduler  
2. Alarm  
1. Daily Alarm  
2. Once Alarm  
3. Weekly Alarm  
4. Alarm Tone  
3. Calculator  
4. To Do List  
5. Calendar  
6. World Time  
7. Clock  
1. Set Time  
2. Set Date  
3. Format  
8. Conversion  
1. Length  
2. Weight  
3. Volume  
4. Area  
5. Temperature  
9. Timer  
10. Stopwatch  
7. Games  
1. Bowling  
2. Speed Up  
3. Honey Ball  
2
8. WWW Services  
1. Home  
2. Bookmark  
3. Goto  
1
Shown only if supported by your SIM card.  
2
May not be shown or supported by your network service provider.  
56  
Call Records  
Via this menu, you can view:  
Missed calls  
Received calls  
Dialled calls  
The number and name (if available) are displayed  
together with the date and time at which the call  
was made. You can also view call times and costs.  
Missed Calls  
Menu 1-1  
This option lets you view the last 15 unanswered  
calls. You can also:  
Edit the number if available and dial it or save it  
in the phonebook  
Delete the call from the list  
Received Calls  
Menu 1-2  
This option lets you view the last 15 phone calls  
received. You can also:  
Edit the number if available and dial it or save it  
in the phonebook  
Delete the call from the list  
57  
Ca ll Re c o rd s  
Ca ll Re c o rd s  
Dialled Calls  
Menu 1-3  
Call Cost  
Menu 1-5  
This option lets you view the last 15 numbers dialled.  
You can also:  
This network feature lets you view the cost of calls.  
The following options are available.  
Edit the number and save it in the phonebook  
Redial the number  
Last Call Cost: cost of the last call made.  
Delete the number from the list  
Total Cost: total cost of all calls made since the cost  
counter was last reset. If the total cost exceeds the  
maximum cost set via the Set Max Cost option, you  
can no longer make any calls, except calls to the  
emergency services, until you reset the counter.  
Call Time  
Menu 1-4  
This option lets you view the timers for calls made  
and received. The following timers are available.  
Max Cost: maximum cost set via the Set Max Cost  
option (see below).  
Last Call Time: length of the last call.  
Reset Counters: option used to reset the cost  
counter; you must first enter your PIN2 (see page 130)  
and then press the OK soft key.  
Total Sent: total length of all calls made since the  
timer was last reset.  
Set Max Cost: option used to enter the maximum  
cost that you authorise for your calls; you must first  
enter your PIN2 (see page 130) and then press the OK  
soft key.  
Total Received: total length of all calls received  
since the timer was last reset.  
You can use the Reset Timers option to reset the  
call timers; you must first enter the phone password  
(see page 129) and then press the OK soft key.  
Price/Unit: option used to set the cost of one unit;  
this price per unit is applied when calculating the cost  
of your calls; you must first enter your PIN2 (see  
page 130) and then press the OK soft key.  
Note: The actual time invoiced for calls by your  
service provider may vary, depending on  
network features, rounding-off for billing  
purposes, and so forth.  
58  
59  
Me s s a g e s  
Messages  
Your phone receives voice mail notification messages,  
and Short Message Service (SMS) text messages. Voice  
mail and SMS are network services. Please contact your  
service provider for more information.  
You can then select this option and simply press the  
OK soft key to listen to your messages.  
Note: If you press and hold down  
when the phone  
is in idle mode, you can access your voice mail  
server directly, provided that the number has  
already been set via the Voice Server Number  
menu option.  
When the  
mail. When the  
icon appears, you have received voice  
icon appears, you have received  
new text messages. If the message memory is full, an  
error message is displayed and you cannot receive any  
new messages. Use the Delete option in the Read  
Messages menu to delete obsolete messages. Once  
there is space in the memory, any undelivered SMS  
messages will be received (provided sufficient space is  
available).  
Voice Server Number  
You can change the voice mail server number.  
Note: Some networks do not allow the user to change  
this setting.  
Note: If your SIM card supports the ALS feature and  
you receive voice mail, one of the holes in the  
To...  
Then press...  
Enter the server  
number  
The corresponding number  
keys.  
tape symbol  
concerned.  
is filled in to indicate the line  
(
)
Recall a number in  
the phonebook  
The PhoneBook soft key.  
Picture and ring tone messages can also be received.  
To...  
Then use the...  
Correct a digit  
The soft key or  
.
Send or receive  
picture messages  
Picture Messages menu  
option; see page 67.  
Move the cursor to the  
left/right without clearing  
the digit  
.
Load ring  
tone messages  
Ring Tone menu option;  
see page 74.  
Note: See page 37 for instructions on how to use the  
phonebook.  
Voice Mail  
Menu 2-1  
Read Messages  
Menu 2-2  
This menu provides you with a quick way of accessing  
your voice mailbox (if provided by your network).  
When the Read Messages menu is selected, the  
header of the first message is displayed. This contains  
the:  
Message number  
Message status (new, old, not sent, sent)  
Connect to Voice Mail  
Before using this feature, you must enter the voice  
server number obtained from your service provider (see  
the following page).  
60  
61  
Me s s a g e s  
Me s s a g e s  
Write Messages  
Menu 2-3  
To view this message, press the View soft key. The  
screen shows the:  
Senders phone number (if sent with the message)  
Date and time at which the message was  
received  
Via this menu, you can write and edit text messages  
of up to 160 characters.  
Message text  
1. Key in a message. For details on how to enter  
text, refer to page 44.  
To scroll through the messages, press  
or  
.
You can choose the following options, by pressing  
the Options soft key.  
2. After you complete the message, you can select  
the following options.  
Text Reply: allows you to reply by sending a text  
message. You can also:  
Change the SMS centre number (if required)  
Send the message  
Send Only: allows you to send the message  
immediately. You can enter the required  
destination.  
Save and Send: allows you to save a copy of the  
message and then send the message to the  
required destination. You can read the message  
using the Read Messages option. When you  
read the message, Sentis displayed to indicate  
the message state.  
Save and send the message  
Save but not send the message  
Call back: allows you to call the sender back.  
Edit: allows you to edit a message.  
Save Only: allows you to save the message so  
that it can be sent later. When you read the  
message, Not sentis displayed.  
Delete: allows you to delete obsolete messages.  
Cut Number: allows you to extract a number from  
the message text, so that you can call the number or  
save it in the phonebook.  
3. After selecting the required option, press the  
Select soft key.  
Send: allows you to send a message that you have  
not already sent.  
The display prompts you to enter the destination  
number.  
Send again: allows you to resend a message that  
you have already sent.  
4. Enter the phone number and press the OK soft  
key or press the PhoneBook soft key to select  
the number from the phonebook.  
Note: The options available vary, depending on the  
message status (new, old, not sent, sent).  
62  
63  
Me s s a g e s  
Me s s a g e s  
Preset Message List  
Menu 2-4  
Default Type: allows you to set the default message  
type (Text, Voice, Fax, X400, Email and ERMES). The  
network can convert the message into the selected  
format (possibly on a subscription basis).  
Using this menu, you can preset up to five messages  
that you use most frequently. When you access this  
menu, the preset message list is displayed. Scroll  
through the list using  
or  
. When the  
required message number appears, press the  
Default Validity: allows you to set the length of  
time for which your text messages will be stored at  
the message centre while attempts are made to  
deliver them.  
Possible values are one hour, 6 hours, 24 hours, one  
week and the maximum authorised by your service  
provider.  
Options soft key.  
The following options are available.  
Edit: allows you to write a new message or edit the  
selected preset message.  
Note: For further information on how to enter  
characters, refer to page 44.  
Reply Path: allows the recipient of your SMS  
message to send you a reply via your message  
centre, if the service is provided by the network.  
Send Message: allows you to recall the selected  
preset message. Once you have completed the  
message, you can send, save and send, or simply save  
it. For details on how to send a message, see page 63.  
Delivery Report: allows you to activate or  
deactivate the report function. When this function is  
activated, the network informs you whether or not  
your message has been delivered.  
Delete: allows you to delete the selected preset  
message.  
Setup  
Menu 2-5  
Broadcast  
Menu 2-6  
Via this menu, you can set up default SMS  
information.  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic. Messages are displayed immediately they are  
received, provided that:  
Service Centre: allows you to store or change the  
number of your SMS centre required when sending  
messages. You must obtain this number from your  
service provider.  
The phone is in the idle mode  
The Receive option is set to Enable  
The message channel is currently active in the  
channel list  
64  
65  
Me s s a g e s  
Me s s a g e s  
Picture Messages  
Menu 2-7  
If the message is long, press the down volume key  
on the left side of the phone one or more times.  
The phone allows you to send and receive text  
messages that contain pictures. These messages are  
called picture messages, several of which are  
preset in the phone and can be replaced with new  
ones received from other sources.  
The last five messages are also stored for later  
retrieval. Please contact your service provider for  
more information.  
The following options are available.  
The following options are available.  
Write Message: allows you to write text to send  
with the picture message.  
Read: allows you to view the first message. Scroll  
through the message using  
of the message, press the Next soft key to move to  
the next message.  
or  
. At the end  
Delete: deletes the picture message; Empty is  
displayed instead of the title.  
Send Message: allows you to enter the destination  
phone number; you must then press the OKsoft key  
to send the picture message.  
Receive: allows you to turn the reception of  
broadcast messages on or off.  
Cut Number: allows you to extract a number from  
the picture message, so that you can call the number  
or save it in the phonebook.  
Channel List: lists all available channels. The  
channels currently selected are indicated by an  
asterisk ( ) beside the name. When you select one of  
*
them, you can edit, enable, disable or delete the  
channel.  
Receiving a Picture Message  
The Enter Channel option allows you to add a new  
channel to the channel list. Enter the appropriate  
channel ID obtained from your service provider, and a  
title for the channel.  
To view a message immediately you receive it, press  
the View soft key. Press the right soft key to toggle  
between viewing the message and the image.  
Language: allows you to select your preferred  
language to be used when displaying cell broadcast  
messages.  
66  
67  
Me s s a g e s  
The following options are available.  
Save: allows you to save the picture message in your  
picture message list.  
Discard: allows you to discard the picture message  
without saving it.  
Cut Number: allows you to extract a number from the  
picture message, so that you can call the number or  
save it in the phonebook.  
Note: This function is available between phones  
supporting Nokias* Smart Messaging services.  
Each picture message is made up of several text  
messages; it may, therefore, cost you more to  
send one picture message than one text  
message.  
Picture messages are stored in the phone; you  
cannot, therefore, view them if you use your SIM  
card in another phone.  
* Nokia is a registered trademark of Nokia Corporation.  
68  
Voice Functions  
In the Voice Functions menu, you can use voice  
features, such as:  
Voice dial  
Voice command  
Voice memo  
Voice Dial  
Menu 3-1  
The voice dialling feature allows you to make phone  
calls by saying a voice tag that has been added to a  
name and phone number in the phonebook. Any  
spoken word, such as a name, can be a voice tag.  
When recording a voice dial tag, note that:  
Voice tags are not language-dependent. They are  
dependent on the speakers voice.  
Voice tags are sensitive to background noise. Where  
possible, record voice tags or make calls in a quiet  
environment.  
When recording a voice tag or making a call, hold  
the phone in the normal position close to your ear.  
The maximum length for a voice tag recording is  
about 1.5 seconds, but very short names are not  
recorded.  
You can record up to twenty voice-dial entries.  
69  
Vo ic e Fu n c t io n s  
Vo ic e Fu n c t io n s  
Record: allows you to record name tags and allocate  
them to numbers for voice dialling.  
Delete One: allows you to delete an individual voice  
tag. The corresponding phone number remains in the  
phonebook but the voice tag is deleted.  
1. Say the name you want to use for voice dialling  
after you hear a voice prompt. For best results, use  
names with at least two syllables, or use both a  
first and last name. The phone stores the name as  
the first sample, and then prompts you to say the  
name again.  
If the name displayed is... Then press...  
To be deleted  
The OK soft key.  
Not to be deleted  
or  
.
The next name is  
displayed.  
2. Respond to the prompt by repeating the name.  
The phone stores the name as the second sample  
and then requests the phone number and name.  
To exit the Delete One option, press the  
key.  
soft  
3. To store the number, press the OKsoft key. Follow  
the instructions described on page 37 to store the  
number in your phonebook.  
Play All: allows you to play back all recorded voice  
tags.  
Delete All: allows you to delete all voice tags. The  
corresponding phone numbers remain in the  
phonebook but the voice tags are all deleted. Press  
the OK soft key when the message Delete All  
Confirm?is displayed.  
Act: allows you to activate voice dialling.  
You hear a voice prompt and Say Name is  
displayed. Say the voice tag clearly. The phone  
automatically dials the number of the recognised  
voice tag. If no match is found for the voice tag or  
the tag is not recognised, the phone may ask you to  
try again.  
Otherwise, press the Cancel soft key to exit the  
function without deleting the voice tags.  
Note: This option is only available once you have  
recorded and stored voice tags.  
70  
71  
Vo ic e Fu n c t io n s  
Vo ic e Fu n c t io n s  
Voice Command  
Menu 3-2  
This menu gives you quick access to menus you use  
frequently, by saying your own voice commands.  
The following options are available.  
Record: allows you to record a memo. The screen  
displays the:  
Memo location  
The following options are available.  
Date and time when the memo was recorded  
Recording time counter  
Record: the most frequently used menu functions  
are programmable with your own voice commands.  
The menus are preset to OFF by default, indicating  
that they are not recorded. When voice commands  
are recorded successfully, the menus are changed to  
ON in the display.  
The maximum recording time is about 35 seconds.  
If you want to record for longer, press the Continue  
soft key. Split appears instead of Continue. You can  
continue recording and the rest of the memo is  
stored in the next memo location.  
Act: allows you to access the menus using the  
recorded voice commands.  
To stop recording, press the Stop soft key.  
Note: If all memo locations are full, you must delete  
Play All: plays back all voice commands you have  
recorded.  
an old memo before recording a new one.  
Replay: allows you to play back all memos recorded,  
starting with the most recent memo. The screen  
displays the:  
Delete All: deletes all commands you have  
recorded.  
Memo location  
Date and time when the memo was recorded  
Voice Memo  
Menu 3-3  
To skip to the next memo, press the Skip soft key. To  
stop the playback, press the Stop soft key.  
You can use the Voice Memo feature to:  
Record up to three voice memos  
Play the recorded voice memos  
Delete one or all voice memos  
Delete One: allows you to delete a specific memo.  
All memos recorded are played back, starting with  
the most recent one.  
Delete All: allows you to delete all memos. Press  
the OK soft key when the message Delete All  
Confirm?is displayed.  
72  
73  
To n e s  
Tones  
When you receive a ring tone message, proceed as  
follows.  
You can use the Tones menu to customise various  
sound settings, such as the:  
Ring tone, volume and type for incoming calls or  
messages  
Sounds made when your call is connected, you  
press a key, make a mistake or you switch your  
phone on/off.  
1. To listen to the tone, press the Play soft key.  
2. To save the ring tone, press the Save soft key.  
3. Select the location in which you wish to save the  
ring tone and press the OKsoft key.  
4. To use this tone as the current ring tone, press the  
Yes soft key. Otherwise, press the No soft key.  
Composing ring tones (User 1~2)  
With this method, you can select one of two ring  
tones composed with the Melody Composer menu  
option.  
Ring Tone  
Menu 4-1  
This option allows you to set the ring tone for incoming  
calls or messages.  
Downloading 40 poly ring tones from other sources  
(Empty)  
With this method, you can download 12 of the ring  
tones from sources, such as PCLink in the content  
download kit or a WAP site.  
Note: If your SIM card supports the ALS feature, this  
option also allows you to select a different ring  
tone for each line.  
Note: While downloading ring tones, if the battery is  
detached from the phone, you may lose the  
downloaded ring tones.  
The following options are available.  
Melody: lets you choose between many different  
melodies. Each time you select a melody from the list,  
the melody is played.  
Melody Composer  
Menu 4-2  
Bell: lets you choose between many different bells.  
Each time you select a bell from the list, the bell rings.  
This menu allows you to compose your own,  
customised ring tone.  
Three octaves are available.  
A maximum of 100 notes can be entered.  
You can adjust the length of the notes and add  
My Music Box: lets you choose between  
17 changeable ring tones; see below for further details.  
rests, as required.  
Downloading mono-poly ring tones (Download 1~3)  
With this method, you can select one of three ring  
tones extracted from a Nokia-compatible ring tone  
message. For details about this network service,  
contact your service provider.  
Composing a Melody  
You can compose two melodies.  
1. When you access the menu, the names of any  
melodies created are displayed. Otherwise, (Empty)  
appears. Select the melody that you wish to  
create or edit.  
74  
75  
To n e s  
To n e s  
2. Press the Select soft key and compose your melody  
using the following keys.  
5. To use the melody as the ring tone, press the Yes  
soft key.  
The melody is saved and is played each time your  
phone rings.  
To...  
Then press...  
Enter C, the first note  
in the musical scale  
.
Deleting a Melody  
Enter D  
Enter E  
Enter F  
Enter G  
Enter A  
Enter B  
.
.
.
1. Select the melody that you wish to delete.  
2. Hold down  
for a few seconds.  
All notes are erased.  
.
3. Press the Listen soft key. You are asked to  
confirm that you wish to delete the melody by  
pressing the Yes soft key.  
.
.
Move a note up or  
down one octave  
Enter a rest  
.
Ring Volume  
Menu 4-3  
until the rest is of the  
required length.  
.
This option allows you to adjust the ring volume to  
one of five levels. Use the volume keys on the left  
Delete notes  
side of the phone or  
the greater the volume.  
. The more bars you see,  
Move a note a  
semitone up or down  
or  
(for example,  
the note A changes to A#, B,  
C, C#, and so on each time  
you press  
).  
Alert Type  
Menu 4-4  
Add # to a note or not  
.
Change the length  
of a note  
Listen to your melody The Listen soft key.  
Cancel your changes  
(the length changes  
each time you press the key)  
This option allows you to indicate how you are to be  
informed of any incoming calls. The following options  
are available.  
.
.
Light Only: only the backlight is switched on; the  
phone neither rings nor vibrates.  
3. When you are satisfied with your melody, press the  
Melody: the phone rings using the tone selected via  
the Ring Tone menu option.  
Yes soft key.  
Vibration: the phone vibrates but does not ring.  
4. Enter a title for the melody.  
Vibra+Melody: the phone first vibrates three times  
and then starts ringing.  
Note: For further details on how to enter characters,  
refer to page 44.  
Note: To toggle between the current alert type and  
You are asked if the melody is to become the ring tone.  
the Silent mode, hold down  
.
76  
77  
To n e s  
To n e s  
The following options are available.  
Keypad Tone  
Menu 4-5  
OFF: when you switch the phone on and off, you do not  
hear a jingle.  
This option allows you to select the tone that the  
keypad generates when you press a key. The following  
options are available.  
Classical: when you switch the phone on and off, you  
hear the default jingle.  
OFF: the keys do not generate any sound.  
Cheerful: when you switch the phone on and off, you  
hear a cheerful jingle.  
Cool: each key from  
generates a pure sound only in the idle mode.  
, when pressed,  
to  
Piano: each key from , when pressed,  
generates a different note in the musical scale only in  
the idle mode.  
to  
Error Tone  
Menu 4-8  
This option allows you to select how the phone informs  
you that you have made a mistake. The following  
options are available.  
Tone: each key, when pressed, generates a different  
sound.  
Beep: each key, when pressed, generates the same  
sound.  
OFF: the phone does not beep.  
ON: the phone beeps to indicate an invalid entry.  
Message Tone  
Menu 4-6  
Minute Minder  
Menu 4-9  
This option allows you to indicate how you are to be  
informed that you have received a new message. The  
following options are available.  
This option allows you to specify whether the phone  
must beep every minute during an outgoing call to keep  
you informed of the length of your call. The following  
options are available.  
Single Beep: the phone beeps once.  
SMS Tone1 ~ SMS Tone5: the phone rings using the  
selected SMS tone.  
OFF: the phone does not beep.  
ON: the phone beeps every minute.  
Light Only: the service light on the top of the phone  
flashes.  
Connect Tone  
Menu 4-10  
Vibration: the phone vibrates but does not ring.  
This option allows you to specify whether the phone  
should beep when the phone connects to the network.  
The following options are available.  
Power On/ Off  
Menu 4-7  
This option allows you to select the tone that you will  
hear when you switch your phone on or off.  
OFF: the phone does not beep.  
ON: the phone beeps when your call is accepted.  
78  
79  
S e t t in g s  
Settings  
Own Number  
Many different features of your phone can be  
customised to suit your preferences. All of these  
features are accessed via the Settings menu.  
Note: The contents of this menu may vary, depending  
on the SIM card.  
You can enter your own name and number using this  
menu. If you have subscribed to the Alternate Line  
Phone Settings  
Menu 5-1  
Service (ALS), you can select a line with  
or  
.
Greeting Message  
The following options are available.  
This option allows you to set a greeting message to  
be displayed briefly when the phone is switched on.  
When you select this option, the current message is  
displayed.  
Erase: allows you to erase the name and number.  
Edit: allows you to edit the name and number. If your  
SIM card supports the ALS service, only the Edit soft  
key is displayed. Press the Edit soft key and enter or  
edit your own name for the ALS line.  
To...  
Then press...  
Clear the existing message  
and hold it  
down until the message  
is cleared.  
Language  
You can select a different language for the display  
and voice functions.  
Enter a new message  
The appropriate  
alphanumeric keys.  
Cancel your input and  
return to the previous menu  
.
You can also set the default text input mode. For  
details on the text input modes, refer to page 44.  
For more information on entering characters, refer to  
page 44.  
80  
81  
S e t t in g s  
S e t t in g s  
Any-key Answer  
Service Light  
Depending on the setting of the Any-key Answer  
option, you can answer an incoming call by pressing  
This option allows you to select whether the service  
light on the top of the phone is used or not. The  
following options are available.  
any key, except  
and the Reject soft key.  
To reject a call when Then press the...  
the phone is...  
ON: the service light flashes when the phone is  
ready for use.  
Open  
Reject soft key or  
.
OFF: the service light is not used.  
Closed  
Volume keys on the left side  
of the phone.  
Note: Hold this key down if  
the Any-key Answer  
option is set to OFF.  
Auto Redial  
With the Auto Redial function, the phone makes up  
to ten attempts to redial a phone number after an  
unsuccessful call.  
ON: you can press any key, except  
and the  
Reject soft key.  
Note: The interval between two call attempts varies.  
OFF: you can only press  
or the Accept soft key.  
The following options are available.  
ON: the number is redialled automatically.  
OFF: the number is not redialled.  
Backlight  
You can specify whether or not the phone uses the  
backlight. A marginal increase in standby/talk time  
can be achieved by turning the backlight off. The  
following options are available.  
Auto Answer  
Short: the backlight comes on when you press a key  
or receive a call and switches off 10 seconds after the  
last key is pressed.  
With the Auto Answer function, the phone auto-  
matically answers calls after 3, 5 or 10 seconds. You  
can also turn this feature off.  
Long: the backlight comes on when you press a key or  
receive a call and switches off 20 seconds after the  
last key is pressed.  
Note: This feature is only available when the phone  
is connected to a car kit (optional).  
OFF: the backlight is not used.  
82  
83  
S e t t in g s  
S e t t in g s  
Caller ID  
Reset Settings  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
You can easily reset your phone to its default  
configuration. Before proceeding, you must enter the  
phones 4-digit password.  
Note: Some networks do not allow the user to  
change this setting.  
Note: The password is preset to 0000. To change this  
The following options are available.  
password, refer to page 97.  
Default: the default setting provided by the network  
is used.  
Active Line  
Some SIM cards may be used with two subscriber  
numbers (network service). This function is only  
available if your SIM card supports it.  
Hide Number: your number is not displayed on the  
other persons phone.  
Send Number: your number is sent each time you  
make a call.  
This option allows you to select the line to be used  
to make calls. However, calls can be answered on  
both lines, regardless of the selected line. When you  
select a line, the line number appears as an indicator  
after the operator/service providers name.  
Active Folder  
The voice dial and voice command modes can be  
activated automatically whenever the phone is  
opened. The following options are available.  
When you select the Manual option, you can choose  
a line whenever you use the call barring, call  
diverting or call waiting functions; in this case, there  
is no indicator to show which line is active.  
OFF: the voice dial and voice command modes must  
be activated manually via the Voice Dial and Voice  
Command menu options; for further information,  
refer to pages 69 and 72 respectively.  
Voice Dial: the voice dial mode is activated when  
you open the phone.  
Voice Command: the voice command mode is  
activated when you open the phone.  
Note: When you use the ear-microphone and the  
Active Folder menu option is set to Voice Dial  
or Voice Command, you can use the corres-  
ponding function by pressing the button on the  
ear-microphone.  
84  
85  
S e t t in g s  
S e t t in g s  
Network Services  
Menu 5-2  
You can specify individual diverting options for each of  
the following call types:  
Voice calls only  
Fax calls only (not available when line 2 is in use)  
Data calls only (not available when line 2 is in use)  
These menu functions are network services.  
Please contact your service provider to check their  
availability and subscribe to them, if you so wish.  
Example: You can:  
Systematically divert fax calls to your  
office fax machine  
Divert voice calls to your colleague if you  
are already using the phone  
Call Diverting  
Note: The call divert options may be different,  
depending on your SIM card and those not  
supported by your network operator may not  
be shown.  
To set your call diverting options, proceed as follows.  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
1. Select the type of call diverting required by  
pressing  
or  
until the appropriate option  
is highlighted, and then press the Select soft key.  
Example: You may wish to divert your business calls  
to a colleague while you are on holiday.  
2. Select the type of calls to be diverted by  
pressing  
or  
until the appropriate option  
Call diverting can be set up in the following ways.  
Divert Always: all calls are diverted.  
is highlighted and then press the Select soft key.  
3. Press the Activate soft key to confirm your settings.  
4. Enter the number to which the calls are to be  
diverted.  
Busy: calls are diverted if your phone is engaged on  
another call.  
To enter an international code, hold down  
No Reply: calls are diverted if you do not answer  
the phone.  
until the + sign is displayed. You can also select a  
number in the phonebook or the voice server  
number, by pressing the Options soft key, followed  
by PhoneBook or Voice Server Number.  
Unreachable: calls are diverted if you are not in an  
area covered by your service provider.  
5. When you are satisfied, press  
or the OK soft  
Cancel All: all call diverting options are cancelled.  
key. The phone sends your settings to the network  
and the networks acknowledgement is displayed.  
86  
87  
S e t t in g s  
S e t t in g s  
Call Barring  
The call barring network service allows you to restrict  
your calls.  
To deactivate specific call diverting settings, proceed  
as follows.  
Call barring can be set up in the following ways.  
All outgoing: calls cannot be made.  
1. Select the call diverting option to be deactivated.  
2. Select the type of calls to which this option  
applies.  
International: international calls cannot be made.  
International except to home: when abroad, calls  
can be made only to numbers within the current  
country and to your home country, that is the country  
where your home network provider is located.  
3. Press the Remove soft key.  
The phone sends your settings to the network and  
the networks acknowledgement is displayed.  
All Incoming: calls cannot be received.  
Incoming while abroad: calls cannot be received  
when you are using your phone outside your home  
service area.  
You can also deactivate all call diverting settings by  
selecting the Cancel All option.  
Cancel All: all call barring settings are deactivated;  
calls can be made and received normally.  
You can specify individual call barring options for  
each of the following call types:  
Voice calls only  
Fax calls only (not available when line 2 is in use)  
Data calls only (not available when line 2 is in use)  
To set your call barring options, proceed as follows.  
1. Select the type of call barring required by pressing  
or  
until the appropriate option is  
highlighted and then press the Select soft key.  
2. Select the type of calls to be barred by  
pressing  
or  
until the appropriate option  
is highlighted and then press the Select soft key.  
3. Press the Activate soft key to confirm your  
settings.  
88  
89  
S e t t in g s  
S e t t in g s  
Call Waiting  
4. Enter your call barring password supplied by your  
service provider.  
This network service enables you to be informed  
when someone is trying to reach you during another  
call.  
The phone sends your settings to the network and  
the networks acknowledgement is displayed.  
You can specify individual call waiting options for  
each of the following call types:  
Voice calls only  
Fax calls only (not available when line 2 is in use)  
Data calls only (not available when line 2 is in use)  
To deactivate specific call barring settings, proceed as  
follows.  
1. Select the call barring option to be deactivated.  
2. Select the type of calls to which this option applies.  
3. Press the Remove soft key.  
To set your call waiting options, proceed as follows.  
1. Select the type of calls to which the call waiting  
option is to be applied by pressing  
until the appropriate option is highlighted and then  
or  
4. Enter your call barring password supplied by your  
service provider.  
press the Select soft key.  
The phone sends your settings to the network and  
the networks acknowledgement is displayed.  
2. Press the Activate soft key to confirm your  
settings.  
You can also deactivate all call barring settings by  
selecting the Cancel All option.  
The phone sends your settings to the network and  
the networks acknowledgement is displayed.  
Change Barring Password: you can set and change  
the call barring password obtained from your service  
provider using this option. You must enter the current  
password before you can specify a new one.  
Once you have entered a new password, you are  
asked to confirm it by entering it again.  
To deactivate specific call waiting settings, proceed  
as follows.  
1. Select the type of calls to which the option applies.  
2. Press the Deactivate soft key.  
The phone sends your settings to the network and  
the networks acknowledgement is displayed.  
You can also deactivate all call waiting settings by  
selecting the Cancel All option.  
90  
91  
S e t t in g s  
S e t t in g s  
Network Selection  
Line Identification  
The Network Selection feature enables you to control  
whether the network used when roaming (outside  
your home area) is selected automatically or manually.  
This option allows you to view the following line  
identification settings.  
CLIP (Calling Line Identification Presentation) /  
COLP (Connected Line Identification Presentation)  
If these network functions are active, the callers  
number is displayed during a call. If the phone  
number matches one stored in the phonebook, the  
callers name is also displayed.  
Note: You can select a network other than your home  
network only if it has a valid roaming  
agreement with your home network.  
To indicate whether the network is to be selected  
automatically or manually when roaming, proceed as  
follows.  
CLIR (Calling Line Identification Restriction) /  
COLR (Connected Line Identification Restriction)  
If these network functions are active, your phone  
number is not displayed on the called persons phone.  
1. When the Network Selection menu is displayed,  
press the Select soft key.  
2. Press  
or  
until the appropriate option is  
highlighted and press the OK soft key.  
If you select Automatic, you are connected to the  
first available network when roaming.  
If you select Manual, the phone scans for the  
available networks. Go to Step 3.  
3. Press  
or  
until the preferred network is  
highlighted and press the OK soft key.  
You are connected to that network when roaming.  
92  
93  
S e t t in g s  
S e t t in g s  
Closed User Group (CUG)  
This network service allows incoming and outgoing calls  
to be restricted to a selected user group. You may be a  
member of up to 10 user groups.  
For details on how to create, activate and use a closed  
user group, contact your service provider.  
Outside Access: enables you to allow or prohibit  
calls to numbers other than those nominated for the  
closed user group. This feature depends on the  
nature of your CUG subscription. Please check with  
your service provider.  
Default Group: you may communicate a default  
CUG to your service provider. If you have done so,  
you can enable the Default Group option on your  
phone. When making a call, you will be given the  
option of using your default CUG, instead of  
selecting one from the list.  
Example: A company lends SIM cards to its employees  
and wants to restrict outgoing calls to members  
of the same team.  
When you select the Closed User Group option, you  
are asked if you want to activate the CUG function.  
Press the Yes soft key to confirm. You can now access  
the following options.  
Security Settings  
Menu 5-3  
Deactivate: deactivates the CUG function.  
Index List: lets you list, add or delete CUG index  
numbers. The list of current CUG indexes appears. Add  
a new CUG index (as advised by your service provider)  
or delete a selected group.  
The security settings enable you to restrict the use of  
your phone to:  
The people of your choice  
The types of calls of your choice  
To...  
Then press...  
or  
Various codes and passwords are used to protect the  
features of your phone. They are described in the  
following sections (also see page 129).  
Scroll through the  
existing CUG indexes  
.
Add a new CUG index The Options soft key, select  
PIN Check  
Add and enter the index.  
When the PIN Check feature is enabled, you must  
enter your PIN each time you switch the phone on.  
Consequently, any person who does not have your  
PIN cannot use your phone without your approval.  
Delete a CUG index  
or  
to select the  
index you want to delete, press  
the Options soft key and  
select Delete.  
94  
95  
S e t t in g s  
S e t t in g s  
Note: Before disabling the PIN Check feature, you must  
Change Password  
enter your PIN.  
The Change Password feature allows you to change your  
current phone password to a new one. You must enter  
the current password before you can specify a new one.  
The following options are available.  
Enable: you must enter the PIN each time the phone is  
switched on.  
The password is factory set to 0000. Once you have  
entered a new password, you are asked to confirm it by  
entering it again.  
Disable: the phone connects directly to the network  
when you switch it on.  
To change your PIN, refer to the Change PIN menu  
option below.  
SIM Lock  
When the SIM Lock feature is enabled, your phone only  
works with the current SIM. You must enter the SIM lock  
code.  
Change PIN  
This feature allows you to change your current PIN to a  
new one, provided that the PIN Check feature is  
enabled. You must enter the current PIN before you can  
specify a new one. Once you have entered a new PIN,  
you are asked to confirm it by entering it again.  
Once you have entered the lock code, you are asked to  
confirm it by entering it again.  
To unlock the SIM, you must enter the SIM lock code.  
FDN Mode  
Phone Lock  
The FDN (Fixed Dial Number) mode, if supported by your  
SIM card, allows you to restrict your outgoing calls to a  
limited set of phone numbers.  
When the Phone Lock feature is enabled, the phone is  
locked and you must enter the 4-digit phone password  
each time the phone is switched on.  
The following options are available.  
The password is factory set to 0000. To change the  
phone password, refer to the Change Password menu  
option on page 97.  
Once the correct password has been entered, you can  
use the phone until you switch it off.  
Enable: you can only call phone numbers stored in the  
phonebook. You must enter your PIN2.  
Disable: you can phone any number.  
Note: Not all SIM cards have a PIN2. If your SIM card  
The following options are available.  
does not, this menu option is not displayed.  
Enable: you are required to enter the phone password  
when you switch the phone on.  
To change your PIN2, refer to the Change PIN2 menu  
option on page 98.  
Disable: you are not asked to enter the phone  
password when you switch the phone on.  
96  
97  
S e t t in g s  
S e t t in g s  
Note: This feature is only available if you have selected  
Change PIN2  
the My Image menu option.  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the current  
PIN2 before you can specify a new one.  
Main Menu  
This option allows you to select the type of animation  
for the menus: Classical or Cute.  
Once you have entered a new PIN2, you are asked to  
confirm it by entering it again.  
Skin  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
This option allows you to select one of three menu  
patterns.  
LCD Brightness  
LCD/ LED Settings  
Menu 5-4  
This option allows you to adjust the brightness of the  
Wallpaper  
displays. Press  
brightness.  
to increase or decrease the  
This option allows you to select the background image  
to be displayed on your phone.  
Service Colour  
Image: allows you to select one of the five predefined  
images or the calendar. When the calendar is displayed  
in idle mode, you can scroll through the months by  
There are six colours available for the service light:  
green, yellow, orange, violet, blue and sky blue.  
You can scroll through these colours, by pressing  
pressing  
or  
.
or  
. Press the Select soft key to select the  
required colour.  
My Image: allows you to select one of the images  
downloaded from the content CD or a WAP site.  
Graphic Logo  
To preview an image, press the Preview soft key. To  
This option allows you to display your operators logo  
instead of its name.  
return to the image list, press the  
soft key.  
If you select the Animation option, the downloaded  
images are displayed in sequence.  
ON: the operator logo stored in your phone is displayed  
in idle mode; if no logo has been stored, the operator  
name is displayed.  
My Image Settings: allows you to set the text colour,  
background colour, text position and display time by  
selecting the appropriate sub-options.  
OFF: the operator name is displayed in idle mode.  
98  
99  
S e t t in g s  
Organiser  
Browser Settings  
Menu 5-5  
Note: This menu may not be shown, depending on  
The Organiser feature enables you to:  
Write your schedule or to do list  
your network service provider.  
Set the alarm so that the phone rings at a specific  
time (to remind you of an appointment for example)  
You can set up several proxies, using the Proxy  
Settings menu option, and you can designate one as  
the current proxy, using the Current Proxy menu  
option. The following parameters must be set for each  
proxy; they may vary depending on your service  
provider. Contact your service provider for further  
details.  
Use your phone as a calculator  
View the calendar  
Find out what time it is in various cities around  
the world  
Set the current date and time  
Use your phone as a unit converter, timer or  
stopwatch  
Proxy Name: name of the proxy server.  
WDP Address: IP address required to connect to the  
Internet.  
Scheduler  
Menu 6-1  
The Scheduler helps you to keep track of reminders,  
calls that you need to make, meetings and birthdays.  
The phone alarm rings when the date set for a  
birthday, reminder or call is reached.  
Port Number: number of the port used to connect the  
gateway.  
Home URL: URL address of your home web site.  
Access Point  
When you access the Scheduler menu, the  
following options are available.  
Go to date: allows you to enter a particular date and  
schedule an event on that date.  
NAS Phone Number: PPP server phone number.  
Login Name: PPP server login ID (may be optional).  
Password: PPP server password (may be optional).  
View All: shows the events scheduled.  
Delete All: deletes all the scheduled events.  
Network Type: V.32 Transparent, V.32 Non-Transparent,  
V.110 Transparent or V.110 Non-Transparent.  
100  
101  
Org a n is e r  
Org a n is e r  
To schedule a new event, proceed as follows.  
A date that has a schedule already associated with it  
is highlighted in a box. If you select such a date, the  
contenare displayed.  
1. When the calendar is displayed, select the month  
by pressing the volume keys on the left side of the  
phone, select the week by pressing  
and select the day by pressing  
can also use the Go to date menu option to  
or  
. You  
Note: If you have scheduled more than one event on  
,
a given day, you can scroll to the required  
or  
event by pressing  
or  
.
specify the date.  
The following options are available.  
Notes:  
Add: allows you to add new contents.  
You can also use  
and or to select the day.  
To exit the Calendar screen, press  
phone returns to the previous menu level.  
or  
to select the week,  
Delete: deletes the scheduled event.  
. The  
Move: moves the scheduled event to a new date.  
Copy: copies the scheduled event to a new date.  
2. Press the OKsoft key.  
Delete Day: deletes all events scheduled on that  
date.  
3. Select a schedule type. Four types are available.  
Reminder: requires a description and the time.  
Call: requires a phone number and the time.  
Meeting: requires a description and the time.  
Birthday: requires a name and the time.  
Alarm  
Menu 6-2  
This option allows you to set the alarm to ring at a  
specific time when your phone is switched on. You  
can set one or more alarms.  
4. Enter the appropriate information, referring to  
page 44 for further details on how to enter text if  
necessary.  
The following alarms are available.  
Daily Alarm: the alarm rings every day at the same  
time.  
5. If you wish to set the alarm to ring on the  
scheduled date and time, select Yes. Otherwise,  
select No.  
Once Alarm: the alarm rings only once and is then  
deactivated.  
Weekly Alarm: the alarm rings every week on the  
same day and at the same time.  
6. If you selected Yes, set the time for the alarm and  
press OK.  
The Alarm Tone option allows you to select a  
specific tone for the alarm.  
102  
103  
Org a n is e r  
Org a n is e r  
Calculator  
Menu 6-3  
To set the alarm, proceed as follows.  
You can use the phone as a 9-digit calculator. The  
calculator provides the basic arithmetic functions:  
addition, subtraction, multiplication, division,  
percentages.  
1. Select an alarm type by pressing the Select soft  
key.  
The Set Alarm option allows you to set the alarm  
time or days of the week.  
To use the calculator, proceed as follows.  
1. Enter the first figure using the number keys.  
2. If you have chosen Weekly Alarm, select the  
required day of the week and press  
.
2. Press the Operator soft key until you find the  
appropriate arithmetic symbol: + (add), - (subtract),  
x (multiply), / (divide).  
The symbol appears to indicate that the day is  
*
selected.  
To remove it, press  
.
You can set more than one day.  
3. Enter the second figure.  
3. Press the OK soft key.  
4. Repeat Steps 2 and 3 if necessary.  
4. Enter the required time, then press the OK soft key.  
5. To calculate the result to two decimal places, press  
the Equal soft key or  
To erase any mistakes or clear the display, press  
To enter a decimal point, press  
.
Alarm Activated is displayed.  
.
Once an alarm has been set, you can see the alarm  
icon ( ) in the top line of the display. To stop the  
alarm when it rings, open the phone or press any  
key.  
.
To deactivate the alarm, select the Remove Alarm  
option.  
Note: If your phone is switched off, the alarm will not  
ring.  
104  
105  
Org a n is e r  
Org a n is e r  
To Do List  
Menu 6-4  
Examples:  
This feature allows you to:  
Draw up a list of tasks to be done  
Assign a priority and deadline to each task  
• Sort the tasks by priority and status mark  
Expression  
Key Sequence Result  
12*3+5=  
34+57=  
12x3+5 (or  
)
)
)
)
)
)
)
)
)
41  
91  
34+57  
45+57  
48-23  
14-23  
68x25  
68x40  
35/14  
98/14  
200x10  
10/100  
(or  
(or  
(or  
(or  
(or  
(or  
(or  
(or  
Creating the To Do List  
45+57=  
102  
25  
1. Press the New soft key.  
48-23=  
2. Enter the task.  
For further information on how to enter text, see  
page 44.  
14-23=  
-9  
68*25=  
1700  
2720  
2.5  
7
68*40=  
3. Press the OKsoft key.  
35/14=  
4. Select high or low priority using  
the Select soft key.  
or  
, and  
98/14=  
10% of 200  
10=? % of 100  
20  
5. Enter your deadline.  
10  
10% premium of 200 200+10  
10% discount of 200 200-10  
220  
180  
16  
6. Press the Yes soft key.  
Editing the To Do List  
Square of 4  
4x  
8/  
(or  
(or  
)
)
Reciprocal of 8  
0.12  
If tasks are already defined in the to do list when you  
select the To Do List menu option, the current  
contents are displayed with the associated status  
mark and priority.  
Note: When you have finished with the calculator,  
press to return to the previous menu level.  
To view the detailed contents of a task, press the  
View soft key. To change the status of a task,  
press  
.
106  
107  
Org a n is e r  
Org a n is e r  
You can choose the following options, by pressing the  
Options soft key.  
World Time  
Menu 6-6  
You can use your phone to check the current time in  
21 major cities around the world. Scroll through the  
New: allows you to create a new task.  
Mark: allows you to mark a task as completed.  
Edit: allows you to edit an existing task.  
cities using  
.
The screen shows the:  
City name  
Current date and time  
Sort: allows you to sort the tasks by priority (high,  
low) or by status.  
Time difference between the selected city and your  
city if you have set the local time (see below for  
further details) or GMT (by default)  
Copy: allows you to copy a task.  
Delete: allows you to delete a task.  
Delete All: allows you to delete all tasks.  
To select the time zone in which you are located,  
proceed as follows.  
1. Select the city corresponding to your time zone by  
pressing  
one or more times.  
Calendar  
Menu 6-5  
The local date and time are displayed.  
2. Press the Set soft key.  
You can view calendars for 1900 through to 2099.  
You can also view the lunar date of the selected date.  
3. To...  
Then press the...  
Update the current  
date/time with this  
new setting  
Set Local soft key.  
To move to the...  
Previous day  
Then press...  
or  
or  
or  
or  
.
.
Next day  
Indicate that the  
time zone is currently A check mark is shown  
using the daylight  
saving time  
Set DST soft key.  
Previous week  
Next week  
.
next to the time  
difference.  
.
Next or previous month  
The volume key on the  
left side of the phone.  
Indicate that the  
time zone is no longer (only available when the  
Remove DST soft key  
using the daylight  
saving time  
check mark is shown  
next to the time  
difference).  
You can also change dates by pressing the Goto soft  
key.  
108  
109  
Org a n is e r  
Org a n is e r  
Clock  
Menu 6-7  
Conversion  
Menu 6-8  
This option allows you to change the current time  
and date.  
This option allows you to convert from one type of  
unit to another.  
To convert a value, proceed as follows.  
The following options are available.  
1. Select the type of conversion to be performed from  
Length, Weight, Volume, Area and  
Set Time: allows you to change the time displayed,  
using the 24-hour system.  
Temperature, and press the Select soft key.  
Note: Before setting the time, you must specify your  
2. Enter the value to be converted and press  
move to the Fromfield.  
to  
time zone, via the World Time menu option.  
Set Date: allows you to change the date displayed.  
Enter the day, month and year.  
3. Select the original unit by pressing  
press to move to the To field. Refer to the  
table on the following page for the units available.  
or  
and  
Format: allows you to select the date format:  
DD/MM/YYYY  
MM/DD/YYYY  
4. Select the required unit by pressing or  
to view the  
.
5. Press the Select soft key or  
result.  
The result appears in the Answer box.  
111  
110  
Org a n is e r  
Org a n is e r  
Timer  
Menu 6-9  
Using the Timer feature, you can set the phone to  
sound an alarm after a certain time.  
Units Available  
Type  
Units  
1. Press the Set soft key.  
Length  
mm  
km  
yard mile  
cm  
in  
m
ft  
2. Enter the length of time you wish to count down in  
hours and minutes and press the OK soft key.  
Weight  
Volume  
g
kg  
ton  
pound  
3. Press the Start soft key to start counting down.  
grain oz  
Even if you exit the Timer screen, the timer will  
continue running. After the specified time has expired,  
the phone informs you by playing a melody and  
displaying a text notification. To stop the timer melody  
when it rings, open the phone or press any key.  
3
3
cm  
m
l
in3  
ft3  
yd3  
gal  
2
2
Area  
cm  
m
a
in2  
ft2  
yd2  
To stop the timer before the end, press the Stop soft  
key on the Timer screen.  
Acre  
Temperature  
°C  
°F  
Note: The timer uses power from the battery;  
consequently, the phones operating time will  
be reduced.  
112  
113  
Org a n is e r  
Stopwatch  
Menu 6-10  
The stopwatch can be used to measure times for  
various sports.  
Example: Running or swimming races.  
Up to four stopwatches can be used.  
The precision of the stopwatch is one hundredth of a  
second. The maximum measurement time is 10 hours.  
1. To start the stopwatches, press the Select soft  
key.  
2. When you wish to stop the first stopwatch, press  
the Select soft key. Repeat this step for the other  
stopwatches.  
3. Press the Reset soft key to reset the watches.  
4. Press  
or  
to exit.  
114  
Games  
Using this menu option, you can also enjoy playing  
three games.  
Scroll to the required game by pressing  
and press the Select soft key.  
or  
The following options are available.  
New Game: allows you to start a new game.  
High Score: shows you the High Score table.  
Key Info: shows you which keys do what within the  
game.  
Continue: allows you to continue a previously saved  
game. This option is only available when a game has  
already been saved.  
While you are  
Then press...  
playing a game, to...  
Adjust the game volume  
Pause the game  
The volume keys.  
.
.
Pause and exit the game  
115  
Games
Games
Bowling  
Menu 7-1  
When you reach the finish line, the time spent and  
your score are displayed.  
The goal of the game is to knock down a triangular  
group of ten pins by rolling a ball.  
When you start a new game, you can select the  
required mode, character and ball by pressing  
Key Commands  
.
To...  
Then press...  
When the game starts, the screen shows the character  
and ball. Move the character first, then select the spin  
and direction, and finally set the power of the ball.  
Move left  
Move right  
Accelerate  
Brake  
,
,
or  
or  
.
.
.
Key Commands  
.
To...  
Then press...  
Move left  
Move right  
,
,
,
or  
or  
.
.
Honey Ball  
Menu 7-3  
The goal of the game is to break honey blocks by  
bouncing a ball between a bat and the honey blocks.  
Set the speed or spin  
or throw the ball  
or  
.
When you start a new game, the ball is sitting on the  
bat in the middle of the screen. Once you start the ball  
moving, you must position the bat, so that the ball  
continues to bounce off it. Each time the ball hits a  
honey block, the block breaks, sometimes revealing  
letters that enhance the efficiency of the bat or ball:  
Turn the sound on or off  
.
Speed Up  
Menu 7-2  
The goal of the game is to get to the destination  
without crashing in the shortest time possible.  
B: the bat and ball change back to their standard form.  
C: the ball sticks to the bat each time it hits it, giving  
you time to optimise your position.  
When you start a new game, you can select a  
destination, level of difficulty and vehicule. Once you  
have selected all the options, “Ready?” is displayed and  
the countdown starts.  
H: the bat increases in length.  
P: the ball is changed into a power ball, so that it  
no longer bounces off the blocks. It goes straight  
through them, destroying anything that it touches.  
116  
117  
Ga m e s  
WWW Services  
If you reach the final stage of the game, the rules are  
slightly different. The honey blocks are much  
stronger and need to be hit more than once before  
they are destroyed. At the same time, small bees  
attack the bat, damaging it a little each time until it  
is destroyed and you lose a life.  
You can use your phone as a Web Browser. You can  
obtain up-to-date news, weather, sport and other  
information as well as use e-mail and other Internet  
services.  
Please contact your service provider to open your  
Internet account. To use the Web Browser, you must  
check that you have specified your mobile phone  
number in the Own Number menu option.  
Key Commands  
To...  
Then press...  
Slope up  
Slope down  
Move left  
Move right  
Hit the ball  
.
.
Home  
Menu 8-1  
When you select this menu option, the phone  
connects to the network and loads the homepage of  
the Wireless Web service provider.  
,
,
,
or  
or  
.
.
,
or  
.
Once connected, the homepage is displayed. The  
content depends on the service provider.  
Note: To launch the browser from the idle mode,  
press  
in the centre of the scroll button.  
To exit the browser, press  
at any time.  
The phone returns to the idle mode.  
118  
119  
WWW S e rv ic e s  
WWW S e rv ic e s  
Bookmark  
Menu 8-2  
Goto  
Menu 8-3  
You can store the addresses of up to five Internet  
sites for easy access using the Bookmark feature.  
This menu option allows you to manually enter the  
URL address of the Web site that you wish to access.  
Enter the URL address and press the Go soft key.  
Three options are available.  
Edit: allows you to create or edit a local bookmark.  
1. Enter the required title (up to 14 characters).  
2. Press the OKsoft key.  
Navigating with the WAP Browser  
You can surf the Internet using either the phone keys  
or the WAP Browser menu.  
3. Enter the URL address (up to 128 characters).  
4. Press the OKsoft key.  
Using the Phone Keys  
Go: allows you to open the selected page.  
When surfing the Internet, the phone keys function  
differently from the phone mode.  
Delete: allows you to delete the selected bookmark.  
To...  
Then press...  
or  
Scroll each line of the  
content area  
.
Return to the previous page  
(except on the  
homepage).  
Return to the startup  
homepage  
and hold it  
down anywhere.  
120  
121  
WWW S e rv ic e s  
WWW S e rv ic e s  
Using the WAP Browser Menu  
Show URL: shows the URL of the current page.  
There are various menu options available when surfing  
the Wireless Web.  
Clear Cache: allows you to clear the information  
stored in the cache (the phones temporary memory  
used to store the most recently accessed Web  
pages).  
To access the WAP Browser menu, proceed as follows.  
1. Press  
.
A list of menu options appears.  
About...: shows the version of the WAP Browser.  
2. Highlight the required option using  
or  
.
Entering Text, Numbers or Symbols  
3. Press the left soft key to select the option.  
When you are prompted to enter text, the current  
text entry mode appears above the right soft key  
(ABC/abc). To change modes, press the right soft key.  
Three options are displayed.  
4. If necessary, select the secondary option by  
pressing  
or  
, followed by the left soft key.  
Note: The WAP Browser menus may vary, depending  
on your version of the browser.  
ABC/abc: allows you to enter lower-case and upper-  
case letters. You can switch between lower- and  
The following options are available.  
Back: returns to the previous page.  
upper-case letters by pressing  
.
123: allows you to enter numbers.  
Home: takes you back at any time to the homepage of  
the Wireless Web service provider.  
Sym: allows you to enter various symbols and  
punctuation marks. When you select this option, a  
window is displayed with all available symbols. To  
Exit: exits the WAP Browser.  
select the required symbol, use  
.
Inbox: stores received push messages or WAP data.  
Reload: reloads the current page.  
If you wish to edit text, move the cursor to the  
required position, using  
letter by pressing  
and clear the incorrect  
Advanced: gives you access to the following  
advanced features. Some features may not be  
supported by your network operator.  
. Then enter the correct letter.  
123  
122  
Ad d it io n a l S e rv ic e s  
Additional Services  
ALS (Alternate Line Service)  
Note: Please contact your service provider to check  
the availability of this feature and how to  
subscribe to ALS.  
Setting the Ring Type  
To distinguish between incoming calls on the two  
lines, you can select a different ring tone for each line  
via the Ring Tone menu option. For further details,  
refer to page 74.  
The ALS feature enables two lines to be associated  
with one SIM card. Consequently, you can make and  
receive calls on either line. If you subscribe to this  
network service, a few additional menu options  
enable you to set up this feature.  
Setting Call Diverting Options  
You can set up call diverting via the Call Diverting  
menu option. This service reroutes incoming calls on  
the line of your choice to a specified number. For  
further details, see page 86.  
Selecting a Line  
You can set a line for each call via the Active Line  
menu option. For further details, refer to page 85.  
Editing the Line Name  
You can edit the name of each line via the Own  
Number menu option.  
When you edit the name of a line, this name replaces  
Line 1” or “Line 2”, as applicable. For further details,  
refer to page 81.  
124  
125  
S o lv in g P ro b le m s  
Solving Problems  
Before contacting the after-sales service, perform the  
following simple checks. They may save you the time  
and expense of an unnecessary service call.  
No Service” is displayed  
The network connection was lost. You may be in a  
weak reception area (in a tunnel or surrounded by  
buildings). Move and try again.  
You are trying to access an option for which you  
have not taken out a subscription with your  
service provider. Contact the service provider for  
further details.  
When you switch your phone on, the following  
messages appear  
Insert SIM Card  
Check that the SIM card is correctly installed.  
Phone Locked  
You have entered a number but it was not dialled  
The automatic locking function has been enabled.  
You must enter the phones password before you  
can use the phone.  
Have you pressed  
?
Are you accessing the right cellular network?  
You may have set an outgoing call barring option.  
Enter PIN  
You are using your phone for the first time. You  
must enter the Personal Identification Number  
supplied with the SIM card.  
Your correspondent cannot reach you  
The option requiring that the PIN be entered each  
time the phone is switched on was enabled. You  
must enter your PIN and then disable this option if  
so required.  
Is your phone switched on (  
than one second)?  
Are you accessing the right cellular network?  
pressed for more  
You may have set an incoming call barring option.  
Enter PUK  
The PIN was entered wrongly three times in  
succession and the phone is now blocked. Enter  
the PUK supplied by your network operator.  
Your correspondent cannot hear you speaking  
Have you switched off the microphone (Mute  
appears)?  
Are you holding the phone close enough to your  
mouth? The microphone is located on the bottom  
right of the phone.  
126  
127  
S o lv in g P ro b le m s  
Reference Information  
Access Codes  
The phone starts beeping and **Warning** Battery  
Lowflashes on the display  
There are several access codes that are used by your  
phone and its SIM card. These codes help you protect  
the phone against unauthorised use.  
The battery is insufficiently charged. Replace the  
battery and recharge it or connect the travel adapter.  
The access codes (except for the PUK and PUK2 codes)  
can be changed using the Security Settings menu  
option. See page 95 for further details.  
The audio quality of the call is poor  
Check the signal strength indicator on the display ( );  
the number of bars indicates the signal strength from  
strong (  
) to weak ( ).  
Phone Password  
Try moving the phone slightly or moving closer to a  
window if you are in a building.  
The phone password can be set to avoid unauthorised  
use of the phone. The default password supplied with  
the phone is 0000, but you are advised to change it  
before you start using your phone. Keep the new code  
secret and in a safe place, separate from the phone.  
No number is dialled when you recall a phonebook  
entry  
Check that the numbers have been stored correctly,  
by using the Phonebook Search feature.  
Re-store them, if necessary.  
If you key in an incorrect password five times in  
succession, the phone will not accept the correct code  
for the next five minutes.  
If the above guidelines do not help you to solve  
the problem, take a note of:  
The model and serial numbers of your phone  
Your warranty details  
A clear description of the problem  
Then contact your local dealer or Samsung  
after-sales service.  
128  
129  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
PUK  
PIN  
The PUK (Personal Unblocking Key) is required to  
change a blocked PIN. The PUK may be supplied with  
the SIM card. If not, contact your local service  
provider.  
The PIN (Personal Identification Number) protects your  
SIM card against unauthorised use. It is usually  
supplied with the SIM card. When the PIN Check  
feature is enabled (see page 95), you must enter the  
PIN each time you switch on the phone.  
If you key in an incorrect PUK ten times in  
succession, the SIM card cannot be used anymore.  
Contact your service provider for a new card.  
If you key in an incorrect PIN three times in succession,  
key in the PUK and press the OK soft key. Key in a new  
PIN and press the OK soft key. Key in the new PIN  
again and press the OK soft key.  
You cannot change the PUK. If you lose the code,  
contact your service provider.  
PIN2  
PUK2  
The PIN2, supplied with some SIM cards, is required to  
access some functions, such as charging unit counters.  
These functions are only available if supported by your  
SIM card.  
The PUK2, supplied with some SIM cards, is required  
to change a blocked PIN2.  
If you key in an incorrect PUK2 ten times in  
succession, you cannot use the functions requiring  
the PIN2. Contact your service provider for a new  
card.  
If you key in an incorrect PIN2 three times in  
succession, key in the PUK2 and press the OK soft key.  
Key in a new PIN2 and press the OK soft key. Key in  
the new PIN2 again and press the OK soft key.  
You cannot change the PUK2. If you lose the code,  
contact your service provider.  
Call Barring Password  
The 4-digit call barring password is required when you  
use the Call Barring function. You obtain the password  
from your service provider when you subscribe to this  
function.  
130  
131  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
Health and Safety Information  
Exposure to Radio-Frequency Energy  
(SAR Information)  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels so as to  
use only the power required to reach the network. In  
general, the closer you are to a base station, the  
lower the power output of the phone.  
This phone meets European Union (EU) requirements  
concerning exposure to radio waves.  
Your mobile phone is a radio transmitter and receiver.  
It is designed and manufactured, so as not to exceed  
the limits for exposure to radio-frequency (RF) energy,  
as recommended by the EU Council. These limits are  
part of comprehensive guidelines and establish  
permitted levels of RF energy for the general  
population. The guidelines were developed by  
independent scientific organisations through the  
periodic and thorough evaluation of scientific studies.  
The limits include a substantial safety margin  
designed to ensure the safety of all persons,  
regardless of age and health.  
The highest SAR value for this model phone when  
tested for compliance against the standard was  
0.718W/kg. While there may be differences between  
the SAR levels of various phones and various  
positions, they all meet the EU requirements for RF  
exposure.  
The exposure standard for mobile phones employs a  
unit of measurement known as SAR (Specific  
Absorption Rate). The SAR limit recommended by the  
EU Council is 2.0W/kg.*  
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged  
over ten grams of body tissue. The limit incorporates a substantial margin of safety to give  
additional protection for the public and to account for any variations in measurements. The SAR  
values may vary depending on national reporting requirements and the network band.  
132  
133  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
Precautions When Using Batteries  
Your phone is powered by a rechargeable Li-ion  
standard battery.  
Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling or  
warming first.  
Never use any charger or battery that is damaged  
in any way.  
Do not leave the battery in hot or cold places, such  
as in a car in summer or winter conditions, as you  
will reduce the capacity and lifetime of the battery.  
Always try to keep the battery at room  
Use the battery only for its intended purpose.  
If you use the phone near the networks base  
station, it uses less power; talk and standby times  
are greatly affected by the signal strength on the  
cellular network and the parameters set by the  
network operator.  
temperature. A phone with a hot or cold battery  
may temporarily not work, even when the battery  
is fully charged. Li-ion batteries are particularly  
affected by temperatures below 0 °C (32 °F).  
Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object (coin,  
clip or pen) causes a direct connection between  
the + and – terminals of the battery (metal strips  
on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting  
the terminals may damage the battery or the  
object causing the short-circuiting.  
Battery charging times depend on the remaining  
battery charge and the type of battery and charger  
used. The battery can be charged and discharged  
hundreds of times, but it will gradually wear out.  
When the operation time (talk time and standby  
time) is noticeably shorter than normal, it is time to  
buy a new battery.  
If left unused, a fully charged battery will discharge  
itself over time.  
Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
Use only Samsung-approved batteries and recharge  
your battery only with Samsung-approved chargers.  
When a charger is not in use, disconnect it from  
the power source. Do not leave the battery  
connected to a charger for more than a week, since  
overcharging may shorten its life.  
134  
135  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
Road Safety  
6. Dial sensibly and assess the traffic; if possible,  
place calls when you are not moving or before  
pulling into traffic. Try to plan calls when your car is  
stationary. If you need to make a call while moving,  
dial only a few numbers, check the road and your  
mirrors, then continue.  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But  
an important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your phone behind the wheel, practice good  
common sense and remember the following tips.  
7. Do not engage in stressful or emotional  
conversations that may be distracting. Make the  
people with whom you are talking aware that you  
are driving and suspend conversations that have  
the potential to divert your attention from the road.  
1. Get to know your wireless phone and its features,  
such as speed-dial and redial. If available, these  
features help you to place your call without taking  
your attention off the road.  
8. Use your wireless phone to call for help. Dial the  
emergency number in the case of fire, traffic  
accident or medical emergencies. Remember, it is  
a free call on your wireless phone!  
2. When available, use a hands-free device. If possible,  
add an extra layer of convenience and safety to your  
wireless phone with one of the many hands-free  
accessories available today.  
9. Use your wireless phone to help others in  
emergencies. If you see a car accident, crime in  
progress or other serious emergency where lives  
are in danger, call the emergency number, as you  
would want others to do for you.  
3. Position your wireless phone within easy reach.  
Be able to access your wireless phone without  
removing your eyes from the road. If you get an  
incoming call at an inconvenient time, let your voice  
mail answer it for you.  
10. Call roadside assistance or a special non-  
emergency wireless assistance number when  
necessary. If you see a broken-down vehicle posing  
no serious hazard, a broken traffic signal, a minor  
traffic accident where no one appears injured, or a  
vehicle you know to be stolen, call roadside  
assistance or any other special non-emergency  
wireless number.  
4. Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy traffic  
or hazardous weather conditions. Rain, sleet, snow,  
ice and even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while  
driving. Jotting down a to do list or flipping through  
your phonebook takes your attention away from your  
primary responsibility, driving safely.  
136  
137  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
Operating Environment  
Remember to follow any special regulations in force in  
any area and always switch off your phone whenever  
it is forbidden to use it, or when it may cause  
interference or danger.  
Persons with pacemakers:  
Should always keep the phone more than 15 cm  
(6 inches) from their pacemaker when the phone is  
switched on  
Should not carry the phone in a breast pocket  
Should use the ear opposite the pacemaker to  
minimise potential interference  
When connecting the phone or any accessory to  
another device, read its users guide for detailed safety  
instructions. Do not connect incompatible products.  
If you have any reason to suspect that interference is  
taking place, switch off your phone immediately.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation of  
the equipment and for the safety of personnel, it is  
recommended that the equipment should only be used  
in the normal operating position (held to your  
Hearing Aids  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such interference,  
you may wish to consult your hearing aid  
manufacturer to discuss alternatives.  
ear with the antenna pointing over your shoulder).  
Electronic Devices  
Other Medical Devices  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against the  
RF signals from your wireless phone. Consult the  
manufacturer to discuss alternatives.  
If you use any other personal medical devices, consult  
the manufacturer of your device to determine if it is  
adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this  
information. Switch off your phone in health care  
facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care  
facilities may be using equipment that could be  
sensitive to external RF energy.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker. These  
recommendations are consistent with the independent  
research and recommendations of Wireless Technology  
Research.  
138  
139  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
Emergency Calls  
Vehicles  
This phone, like any wireless phone, operates using  
radio signals, wireless and landline networks as well as  
user-programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never  
rely solely on any wireless phone for essential  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
communications (medical emergencies, for example).  
Posted Facilities  
Switch off your phone in any facility where posted  
notices require you to do so.  
Remember, to make or receive any calls the phone must  
be switched on and in a service area with adequate  
signal strength. Emergency calls may not be possible on  
all wireless phone networks or when certain network  
services and/or phone features are in use. Check with  
local service providers.  
Potentially Explosive Atmospheres  
Switch off your phone when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause an  
explosion or fire resulting in bodily injury or even death.  
To make an emergency call, proceed as follows.  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present  
location (for example, 112 or any other official  
emergency number). Emergency numbers vary by  
location.  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants or where blasting operations  
are in progress.  
3. Press the  
key.  
If certain features are in use (call barring, for example),  
you may first need to deactivate those features before  
you can make an emergency call. Consult this document  
and your local cellular service provider.  
Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include  
below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas (such  
as propane or butane), areas where the air contains  
chemicals or particles, such as grain, dust or metal  
powders, and any other area where you would normally  
be advised to turn off your vehicle engine.  
When making an emergency call, remember to give all  
the necessary information as accurately as possible.  
Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut  
off the call until given permission to do so.  
140  
141  
Re f e re n c e In f o rm a t io n  
Re f e re n c e In f o rm a t io n  
Care and Maintenance  
Other Important Safety Information  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for  
many years.  
Only qualified personnel should service the phone or  
install the phone in a vehicle. Faulty installation or  
service may be dangerous and may invalidate any  
warranty applicable to the device.  
Check regularly that all wireless phone equipment in  
Keep the phone and all its parts and accessories out  
your vehicle is mounted and operating properly.  
of the reach of small children.  
Do not store or carry flammable liquids, gases or  
explosive materials in the same compartment as the  
phone, its parts or accessories.  
Keep the phone dry. Precipitation, humidity and  
liquids contain minerals that will corrode electronic  
circuits.  
For vehicles equipped with an air bag, remember that  
an air bag inflates with great force. Do not place  
objects, including both installed or portable wireless  
equipment in the area over the air bag or in the air  
bag deployment area. If wireless equipment is  
improperly installed and the air bag inflates, serious  
injury could result.  
Do not touch the phone with wet hands while it is  
charging. Doing so may give you an electric shock or  
damage the phone.  
Do not use or store the phone in dusty, dirty areas, as  
its moving parts may be damaged.  
Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain  
plastics.  
Switch off your phone before boarding an aircraft.  
The use of wireless phones in aircraft may be  
dangerous to the operation of the aircraft, and is  
illegal.  
Do not store the phone in cold areas. When the  
phone warms up to its normal operating temperature,  
moisture can form inside the phone, which may  
damage the phones electronic circuit boards.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the  
offender, or legal action, or both.  
142  
143  
Re f e re n c e In f o rm a t io n  
Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or  
strong detergents to clean the phone. Wipe it with a  
soft cloth slightly dampened in a mild soap-and-  
water solution.  
Do not paint the phone. Paint can clog the devices  
moving parts and prevent proper operation.  
Do not put the phone in or on heating devices, such  
as a microwave oven, stove or radiator. The phone  
may explode when overheated.  
Use only the supplied or an approved replacement  
antenna. Unauthorised antennas or modified  
accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger or any accessory is not  
working properly, take it to your nearest qualified  
service facility. The personnel there will assist you,  
and if necessary, arrange for service.  
144  
Glossary  
To help you understand the main technical terms and  
abbreviations used in this booklet and take full  
advantage of the features of your mobile phone, here  
are a few definitions.  
Active Folder  
Ability to voice dial or submit a voice command  
immediately on opening the phone.  
ALS (Alternate Line Service)  
Capability of associating two lines with one SIM card.  
With this service, you can make and receive calls on  
either line, as required.  
Call Barring  
Ability to restrict outgoing and incoming calls.  
Call Diverting  
Ability to reroute calls to another number.  
Call Holding  
Ability to put one call on standby while answering or  
making another call; you can then switch between the  
two calls, as required.  
Call Waiting  
Ability to inform users that they have an incoming call  
when engaged on another call.  
145  
Glo s s a ry  
Glo s s a ry  
CLI (Caller Line Identification) Services  
PUK (PIN Unblocking Key)  
Service allowing subscribers to view or block the  
telephone numbers of callers.  
Security code used to unlock the phone when an  
incorrect PIN has been entered three times in  
succession. The eight-digit number is supplied by  
the service provider with the SIM card.  
GSM (Global System for Mobile Communication)  
International standard for cellular communication,  
guaranteeing compatibility between the various  
network operators. GSM covers most European  
countries and many other parts of the world.  
Roaming  
Use of your phone when you are outside your home  
area (when travelling for example).  
Multiparty Calling  
SIM (Subscriber Identification Module)  
Ability to establish a conference call involving up to  
five additional parties.  
Card containing a chip with all the information  
required to operate the phone (network and memory  
information, as well as the subscribers personal  
data). The SIM card fits into a small slot on the back  
of the phone and is protected by the battery.  
Phone’s Password  
Security code used to unlock the phone when you  
have selected the option to lock it automatically each  
time it switches on.  
SMS (Short Message Service)  
Network service sending and receiving messages to  
and from another subscriber without having to speak  
to the correspondent. The message created or  
received (up to 160 characters long) can be  
displayed, received, edited or sent.  
PIN (Personal Identification Number)  
Security code that protects the phone/SIM against  
unauthorised use. The PIN is supplied by the service  
provider with the SIM card. It may be a four to eight-  
digit number and can be changed, as required.  
146  
147  
Glo s s a ry  
Index  
A
C (continued)  
Soft Keys  
ABC mode 44; 48  
Access codes 129  
Accessories 9  
Active Folder 84  
Active Line 85  
Alarm 103  
Calls (continued)  
received 57  
records 57  
Two keys marked and on the phone, the  
purpose of which:  
Varies according to the function that you are  
currently using  
Is indicated on the bottom line of the display just  
above the corresponding key  
redialling 25  
automatically 83  
rejecting 27  
Alert Type 77  
ALS 124  
Answering  
ring tone 40  
searching for a number in  
the phonebook 42  
time 58  
calls 26  
second call 33  
Any-key Answer 82  
Auto Answer 83  
Auto Redial 83  
via the phonebook 42  
voice functions 69  
waiting 33; 91  
Care 143  
Changing  
passwords  
call barring 90  
phone 97  
Voice Mail  
B
Computerised answering service that automatically  
answers your calls when you are not available, plays  
a greeting (optionally in your own voice) and records  
a message.  
Backlight 15; 82  
Barring  
PIN 96  
calls 89  
PIN2 98  
password 90; 131  
Batteries  
text input modes 45  
Characters  
charging 19  
installing 17  
low battery indicator 21  
precautions 134  
Brightness 99  
Broadcast 65  
Browser  
entering 44  
Charging batteries 19  
Clock 110  
Closed User  
Group 94  
Colour  
service light 41; 99  
Command  
settings 100  
using 119  
voice 72  
Composing melodies 75  
Conference calls  
See Multiparty calls  
Connect  
C
Calculator 105  
Calendar 108  
Caller ID 84  
Calls  
to Voice Mail 60  
Tone 79  
Conversion 111  
Copying phonebook  
entries 40  
Correcting numbers 24  
Cost of calls 59  
CUG 94  
alert types 40; 77  
answering 27  
second call 33  
barring 89  
cost 59  
dialled 58  
diverting 86  
emergency 141  
ending 25  
D
Date setting 110  
Deleting  
melodies 77  
messages 62  
missed calls 29  
holding 32  
international 24  
making 24  
missed 28; 57  
multiparty 34  
148  
149  
In d e x  
In d e x  
D (continued)  
I
M (continued)  
P
Deleting (continued)  
phonebook entries 40  
schedule events 101  
to do list tasks 108  
voice commands 72  
voice dial numbers 71  
voice memos 73  
Dialled Calls 58  
Dialling 24  
Icons 14  
Messages 60  
broadcast 65  
greeting 80  
picture 67  
Pacemakers 138  
Password  
barring 131  
changing 90  
phone 129  
changing 97  
Identifying  
callers 84  
lines 93  
Information numbers 43  
Input mode  
preset 64  
reading 61  
changing 45  
setting 81  
ring tones 74  
setup 64  
Pasting phonebook numbers 39  
Personal Identification Number  
See PIN  
International calls 24  
Internet 119  
tone 78  
phonebook numbers 42  
speed 41  
voice mail 60  
writing 63  
Phone  
layout 10  
lock 96  
password 97; 129  
settings 80  
voice 69  
Microphone mute 30  
Minute Minder 79  
Missed Calls 29; 57  
Multiparty calls 34  
Music box 74  
Mute  
K
Key tones  
muting 36  
selecting 78  
sending 36  
volume 26  
Keys  
Display  
brightness 99  
external 15  
switching on/off 22  
Phonebook 37  
icons 14  
language 81  
copying numbers 40  
deleting recorded names 39  
dialling 42  
editing numbers 40  
erasing numbers 40  
making calls 42  
memory status 40  
options 38  
main 13  
key tones 36  
microphone 30  
settings 98  
location 10  
purpose 11  
Diverting calls 86  
N
Names  
entering 44  
searching/dialling 42  
storing 37  
voice dial 69  
Network Selection 92  
Network Services 86  
Numbers  
correcting 24  
FDN 97  
information 43  
mode 44; 50  
own 81  
E
L
Ear-microphone 23  
Earpiece volume 26  
Editing  
Language 81  
Last number redialling 25  
LCD  
pasting numbers 39  
playing recorded names 39  
ring tones 40  
missed calls 29  
phonebook entries 40  
to do list 107  
Emergency calls 141  
Ending calls 25  
Error Tone 79  
Explosive atmospheres 140  
External display 15  
brightness 99  
external 15  
icons 14  
language 81  
main 13  
settings 98  
searching 42  
speed-dialling 41  
storing numbers/names 37  
voice recording 39  
Picture Messages 67  
PIN 130  
Length of calls 58; 79  
Letters  
entering 44  
Line Identification 93  
Locking  
changing 96  
checking 95  
redialling 25  
searching/dialling 42  
speed-dial 41  
storing 37  
voice dial 69  
voice server 61  
PIN2 130  
F
changing 98  
FDN Mode 97  
Fixed Dial Number mode 97  
Functions  
Power On/Off 78  
Preset Message List 64  
Problem solving 126  
PUK 131  
phone 96  
SIM card 97  
Low battery indicator 21  
selecting 51  
PUK2 131  
G
M
O
Options  
phonebook 38  
selecting 51  
Organiser 101  
Own Number 81  
Games 115  
Maintenance 143  
Medical devices 139  
Melody Composer 75  
Memory status 40  
Memos 72  
R
Graphic Logo 99  
Greeting Message 80  
Radio-frequencies 132  
Read Messages 61  
Received Calls 57  
Recording  
H
Menus  
voice commands 72  
voice dial names 70  
voice memos 73  
Records  
Health 132  
animation 99  
scrolling 53  
Hearing aids 139  
Holding calls 32  
skin 99  
structure 54  
call 57  
150  
151  
In d e x  
R (continued)  
S (continued)  
Redialling  
Stopwatch • 114  
Switching on/off  
microphone • 30  
phone • 22  
automatically • 83  
last number • 25  
Rejecting calls • 27  
Replaying  
Symbolic mode • 44; 50  
voice commands • 72  
voice dial tags • 71  
voice memos • 73  
Reset Settings • 85  
Ring Tone • 74  
phonebook • 40  
Ring Volume • 77  
Road safety • 136  
Roaming • 92  
T
T9 mode • 44; 46  
Text  
entering • 44  
input modes • 44  
language • 81  
Time  
setting • 110  
world • 109  
Timer • 113  
To Do List • 107  
Tones • 74  
S
Safety  
batteries • 134  
electronic devices • 138  
explosive atmospheres • 140  
information • 132; 142  
medical devices • 139  
operating environment • 138  
precautions • 7  
road • 136  
connect • 79  
error • 79  
keypad • 78  
message • 78  
ring • 40; 74  
Travel adapter • 19  
Scheduler • 101  
Searching/dialling  
phonebook numbers • 42  
Second call • 33  
Security Settings • 95  
Selecting functions/options • 51  
Sending key tones • 36  
Service directory • 43  
Service Light • 16; 83  
colour • 41; 99  
U
User groups • 94  
V
Voice  
command • 72  
dial • 69  
functions • 69  
language • 81  
mail  
Settings  
alarm • 104  
connecting to • 60  
server number • 61  
memo • 72  
server number • 61  
Volume  
browser • 100  
date • 110  
LCD/LED • 98  
network • 86  
phone • 80  
earpiece • 26  
keys • 26  
ring • 77  
reset • 85  
security • 95  
text language • 81  
time • 110  
W
Waiting  
Setup • 64  
SIM card  
installing • 17  
call • 33; 91  
locking • 97  
Wallpaper • 98  
WAP Browser • 119  
World Time • 109  
Write Messages • 63  
WWW Services • 119  
SMS • See Messages  
Soft keys • 51  
Solving problems • 126  
Speed-dialling • 41  
152  
153  
154  

Toshiba MK2023GAS User Manual
Superior Z200 User Manual
Sony PLL SYNTHESIZED RADI SRF M37W User Manual
Sony Mobile Xperia ZR C5502 Smartphone 1272 9183 User Manual
Sony Cell Phone ST26i User Manual
Sears 653B User Manual
Seagate MOMENTUS ST980310AS User Manual
Seagate Constellation ST4000NM0053 User Manual
Samsung GH68 08589A User Manual
Pioneer FH P6200 User Manual