|
Contents
Sony Ericsson Z200
Safe and efficient use, warranty, declaration
of conformity
1
This is the Internet version of the user's guide. © Print only for private use.
The SIM card
Getting started
When you register as a subscriber with a network
operator, you get a SIM (Subscriber Identity
Module) card. The SIM card contains a computer
chip that keeps track of your phone number, the
services included in your subscription, and your
phonebook information, among other things.
SIM card, battery, making a call
About this user’s guide
For ease of reference, the “Getting to know your
phone” chapter gives a quick overview of the main
functions of the phone, shortcuts and general
information.
Tip: Verify that your information is saved to the
SIM card before you remove it from another phone.
For example, phonebook entries may be saved in
the phone memory.
More information and downloads are available at
Available services
Assembly
Some services and functions described in this user’s
guide are network- or subscription-dependent.
Because of this, all menus may not be available
in your phone.
Before you can use your phone you need to:
•
•
Insert the SIM card.
Attach and charge the battery.
This symbol indicates that a service
or function is network- or subscription-
dependent.
Please consult your network operator for
more information about your subscription.
Getting started
3
This is the Internet version of the user's guide. © Print only for private use.
SIM card and battery information
Always turn off the phone and detach the charger
before you insert or remove a SIM card.
To insert the SIM card and charge the battery
1. Insert the SIM card. Make sure the SIM card
is placed under the silvery holders.
2. Place the battery on the back of the phone with
the connectors facing each other, and push until
you hear a click.
3. Place the back cover into the slots on the phone
and push until you hear a click.
4. Connect the charger to the phone at the flash symbol
with the symbol on the charger plug facing upwards.
5. It may take up to 30 minutes before the battery
charging icon appears in the display.
6. Wait approximately 4 hours or until the icon indicates
that the battery is fully charged. If you do not see the
battery icon after this time, press any key to activate
the display.
≈ 30 min.
7. Remove the charger by tilting the plug upwards.
≈ 4 h.
Turning on the phone and making calls
Your PIN (Personal Identity Number) is provided
by your network operator but not all operators
require a PIN to activate services.
If your PIN starts with the same digits as an
emergency number, for example 112, the digits
are not hidden with an * when you enter them.
4
Getting started
This is the Internet version of the user's guide. © Print only for private use.
This is so that you can see and call an emergency
number without entering a PIN. See “Emergency
1. Open the phone. Press and hold
2. Enter your PIN, if you have one for your SIM card.
.
If you make a mistake while entering your PIN,
To make and receive calls
delete the number by pressing
.
•
Enter the area code and phone number, and press
YES to make the call.
Note: If you enter the wrong PIN three times in a
row, the SIM card is blocked and the message PIN
blocked appears. To unblock it, you need to enter
your PUK (Personal Unblocking Key). Your PUK
is provided by your network operator.
•
•
Press NO or close the phone to end the call.
When the phone rings, press YES or open the
phone to answer the call. See “Phone functions”
Navigating the menus
To turn on thephone
The main menus are shown as icons on the desktop.
To go to the desktop, press the center of the navigation
Press left, right, up, or down to move through menus.
Press the navigation key to select highlighted items.
Getting started
5
This is the Internet version of the user's guide. © Print only for private use.
Getting to know your phone
Key functions, quick keys, entering letters
Key functions – phone closed
Battery A red light indicates charging
status or low battery.
Volume Increase or decrease the
keys
speaker volume during a call.
Enter the status menu in
standby. Press twice to reject
an incoming call. Press once
to turn off the ring signal
when receiving a call.
External Shows, for example,
display the time, battery status,
network strength, profile,
signal off, incoming call,
missed call, new text message.
Infrared Exchange data via the
IR port.
6
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
Key functions – phone open
1
2
3
1
Speaker.
Main display.
Make and answer calls. Select a menu, submenu or
an option.
4
Navigation key. Press to enter the desktop
menus. Press up, down, left, right to move
through menus, lists and texts.
2
Press the navigation key as an alternative to
.
5
Press for options or help. Press and hold
for WAP.
9
6
7
8
9
Enter digits, 0-9, and letters.
Enter *. Shift between lower or upper case.
Microphone.
3
4
5
10
Press to end or reject a call, go back one level in the
menus, or leave an option unchanged. Press and hold
to go back to standby mode from menus.
6
7
8
11
12
10
11
12
Delete numbers, letters or an item from a list.
Enter # or a space.
Press and hold to turn the phone on or off.
Getting to know your phone
7
This is the Internet version of the user's guide. © Print only for private use.
Quick keys
To...
When in standby:
Useful key combinations (using shortcuts)
are described below.
reach a phone number
at a specific position
press the position number
and
To...
When in standby:
speed dial
press any of the number
keys
and YES
press a volume key once.
–
make an emergency call enter the international
emergency number
enter the Status menu
to see today’s date,
the profile in use and the
model name of the phone
and press YES
enter the menus
press the navigation
key or
enter the first submenu
press
in My Shortcuts
enter Find and Call
change the language
to Automatic
press
press
8888
0000
press
or
change the language
to English
enter Call List
press YES
call your voicemail
enter the + sign
press and hold
press and hold
reject a call
quickly press a volume
key twice when receiving
a call or press NO
turn off the ring signal
when receiving a call
press
key once
, or a volume
To...
In standby when phone
is closed:
set the phone to silent,
options
press and hold
or press
, YES
change information
in external display
press a volume key once
reach a phonebook entry press and hold any of the
beginning with a specific keys
letter
–
8
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
To...
During a call:
To...
When entering letters
using multitap text input:
put a call on hold
retrieve a call
press YES
press YES again
enter a space
press
To...
When entering letters
using T9™ Text Input:
To...
When in the menus:
move through menus
or lists
enter a quick options menu press
or help, if available
use the navigation key
or press a volume key
view alternative words
accept a word and add a press
space
press
or
enter a period
press
delete an item
press
when in lists
view alternative
punctuation marks
press
repeatedly
, then
or
go back to standby
press and hold NO
To...
When entering letters:
shift between upper- and press
lower-case letters
, then the letter
Using shortcuts
A quicker way to move through the menus is to use
shortcuts. Enter the menus by pressing and then
simply press the navigation key to enter the menu.
To get back to standby, press and hold NO.
You can quickly and easily reach the settings you
use most by placing them in the menu My Shortcuts.
enter numbers
press and hold any of the
number keys
delete letters and numbers press
select multitap or
press and hold
T9 Text input methods
select input languages
and other character or
numeric input methods
press and hold
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
9
Delete, edit and rename
Note: This menu only appears if your SIM card
supports this service. Some operators may not use
the name “Online services”. Your phone may not
support all of the services offered.
If you add items, for example, a phonebook entry,
a calendar item or a WAP bookmark, it can be
deleted, edited or renamed.
To delete an item
To enter your new menu system
•
•
Select an item and press
Select an item, press
or Delete All.
.
Scroll to Connect, YES, Online Services, YES.
, select Delete
To edit items
Select an item, press
, select Edit.
Online services
Online services are customized services
offered by network operators, independently
of mobile phones and mobile phone
manufacturers.
A SIM card which supports online services works
in the same way as a normal SIM card. When you have
inserted your SIM card and turned on your phone,
your network operator can download data to your
SIM card. When you restart your phone after the
first data download, a new submenu appears under
the Connect menu.
10
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
Menu overview
Calls
WAP Services
My Shortcuts
Fun & Games
Messages
Missed Calls
Call List
Sony Ericsson
Bookmarks
Write New
Games
Write New
Inbox
*Please note
that some
menus are
Ring Volume
Select Profile
My Numbers
Edit Shortcuts
My Pictures
My Sounds
Themes
Manage Calls Push Inbox
Call Voicemail
Unsent
Time & Cost
Next Call
Options
Enter Address
Resume
Select Profile
Advanced
Options
operator-,
Composer
Operator link*
Templates
Sent Items
Options
Area Info.
SMS Memory
network- and
subscription-
dependent.
**Only
Organizer
Connect
Phonebook
Settings
Ongoing Call*
available
during a call
or conference
call.
Calendar
Alarms
Online Services* Find and Call
Sounds & Alerts Turn Off Tones**
Infrared Port
GSM Networks
Data Comm.
Add Number
Find and Edit
Picture
Profiles
Hold Call**
Timer
Display
Switch Calls**
Release Active Call**
Retrieve Call**
Join Calls**
Stopwatch
Calculator
Language
Time and Date
Locks
Personal Rings
Groups
Email Addresses Handsfree
Options
Transfer Call**
Extract Part**
Release All Calls**
Release Party**
Parties in Conf.**
Calls**
Flip functions
Master Reset
Memory Status
Special Numbers
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
11
Entering letters and characters
Multitap text input
You can enter letters, for example, when you add
names to the phonebook, write text messages or
enter WAP addresses.
Apart from the way you normally enter letters
in your phone, using multitap input, you can use
T9™ Text Input for entering text messages
if the input language you select supports this.
T9 Text Input is a predictive input method and
is a quicker way to write texts.
When saving names in the phonebook or when
writing WAP addresses, you enter letters using
multitap text input. You press each key as many
times as needed to show the letter you want.
The following example shows how to write a name
in the phonebook.
To enter letters using multitap text input
1. Scroll to Phonebook, YES, Add Number, YES,
Add New, YES.
Input languages
Before you start entering letters, you need to select
2. Add the number, YES.
the input languages that you want to use when writing. 3. Press the appropriate key,
or , repeatedly until the character you want
appears in the display, e.g., to enter an A, press
–
,
To select input languages
1. Scroll to Settings, YES, Language, YES, Input, YES.
2. Scroll to the language or alphabet that you want
once, to enter a B, quickly press
between upper- and lower-case letters, press
then enter the letter.
twice, to shift
,
to use for entering letters and press
language you want.
for each
3. Press YES to exit the menu.
See the Latin alphabet, abc, table below:
When writing, you can switch to one of your
Press…
to see/enter…
selected input languages by pressing
and then
. , - ? ! ' @ : ; / ( ) 1
A B C Å Ä Æ à Ç 2 Γ
12
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
Note: A language must be selected in order to use
the T9™ Text Input method. If you change input
method in Settings/Language/T9 Input, this is valid
for all input of texts, not only for the text you are
currently writing.
Press…
to see/enter…
D E F è É 3 ∆ Φ
G H I ì 4
J K L 5 Λ
M N O Ñ Ö Ø ò 6
P Q R S ß 7 Π Σ
T U V Ü ù 8
The following shows how to start writing
a text message.
W X Y Z 9
Tip: Press
punctuation marks, press
to enter a period. To enter other
and then or
+ 0 Θ Ξ Ψ Ω
repeatedly. Press
Press and hold
the text you are currently writing.
to accept and add a space.
to select an input method for
Space # * ↵ ¶
to delete letters and numbers
to shift between upper- and lower-
case letters
To enter letters using T9™ Text Input
1. Scroll to Messages, YES, Text, YES, Write New, YES.
2. For example, if you want to write “Jane”, press
–
press and hold to enter numbers
T9™ Text Input
,
,
,
. A list of alternative words
You can use T9™ Text Input when writing text
messages. The T9™ Text Input method uses a built-
in dictionary to recognize the most commonly used
words for each sequence of key presses. This way,
you press each key only once, even if the letter you
want is not the first letter on the key.
or candidates are shown. If the candidates do not
include a word you want, you can add a new word
to the list whilst selecting.
3. Scroll
to select Jane.
4. When the word is highlighted, press YES to accept
without a space, or press
a space.
to accept and add
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
13
To add a word to candidates
1. Scroll to a candidate similar to the word you want
•
•
Language – Select an input language.
Input Method – A list of input methods available
for the current input language is shown.
Candidates – For T9™ Text Input only.
Turn on or off the alternative words list.
National Char. – Turn off language-specific
characters to save space. This option only appears
for some input languages.
to add, press
, select Edit Word, YES.
2. Press repeatedly to delete one letter at a time.
•
•
Write the new word using multitap text input, YES.
The word is added to the dictionary. The next time
you enter the word you just added to the dictionary,
it appears as one of the alternative words.
3. Continue writing your message. See also
•
Help.
To turn T9™ Text Input on or off
The list of options
Scroll to Settings, YES, Language, YES, T9 Input, YES
Press
when writing to enter a list of options.
or press and hold
when writing.
The list may contain some or all of the following
options:
•
Add Symbol – Symbols and punctuation marks
such as ? and , are shown. Move between the
symbols by using the navigation key.
Insert Item – Add a picture, sound effect,
melody or animation to a message.
Edit Word – For T9™ Text Input only.
Edit the suggested word by using multitap
text input.
•
•
•
Text Format – Edit size, style, alignment
or start a new paragraph.
14
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
Enclose a black and white picture in a text message.
Send a picture via IR.
Personalizing your phone
Choosing ring signal, theme and other settings
•
•
•
Themes
Download a picture via WAP.
You can change the appearance of the display,
for example, the colors and wallpaper, by using
themes. Your phone comes with a number of preset
themes.
Handling pictures
You can also add, delete or rename pictures
in My Pictures. The number of pictures that can
be saved depends on the size of the pictures. File
types supported are GIF, JPEG and WBMP.
To select a theme
Scroll to Fun & Games, YES, Themes, YES.
Tip: When viewing your pictures in Fun & Games/
My Pictures, you can set a wallpaper by pressing
To adjust the display contrast
Scroll to Settings, YES, Display, YES, Contrast, YES.
.
To view your pictures
Pictures
Scroll to Fun & Games, YES, My Pictures, YES.
The pictures are shown in thumbnail view. To get
a full view, press YES.
Animations can only be viewed when inserting
Your phone comes with a number of pictures.
All pictures are saved in Fun & Games/My Pictures.
You can:
•
•
Set a picture as a wallpaper when in standby mode.
Assign a picture to an entry in the phonebook.
When that person calls, the picture appears in the
display (provided your subscription supports the
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
15
To select a picture as wallpaper
1. Scroll to Settings, YES, Display, YES, Wallpaper, YES, 1. From standby, press
To receive a picture via Infrared
, scroll to Activate IR, YES.
Select Picture, YES.
2. When you receive the picture, press YES to save it in
2. Select a picture, YES.
My Pictures.
To turn the wallpaper on or off
Scroll to Settings, YES, Display, YES, Wallpaper, YES,
Activate, YES.
To receive a picture via a message
When you receive a picture via a message, a new
message appears in your Inbox. Highlight the picture
in the message by using the navigation key to select it,
Exchanging pictures
press
and select Save to save it in My Pictures.
You can send and receive pictures via IR and in text
messages. For more information on sending pictures
in messages, see “Messaging” on page 42.
Ring signals and melodies
Your phone comes with a number of standard
and polyphonic melodies which can be used as
information. You can create and edit melodies,
and send them to a friend, in a text message.
You can also exchange melodies via IR or download
new via WAP.
Note: You are not allowed to exchange copyright-
protected material.
To send a picture
1. Scroll to Fun & Games, YES, My Pictures, YES.
2. Select a picture, YES. Press
3. Select Send, YES.
.
Note: You are not allowed to exchange copyright-
protected material.
4. Select a transfer method, YES.
16
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
Managing ring signals and melodies
Exposure to a loud ring volume may damage hearing.
Answer the call or lower the volume before placing
the phone to your ear.
•
•
•
•
Press
Press
Press
Press
to raise the note one octave.
once to raise the note one semitone.
twice to lower the note one semitone.
to remove notes.
To compose a ring signal
To select a ring signal
1. Scroll to Fun & Games, YES, Composer, YES.
2. Compose your ring signal using the options
described above.
Scroll to Settings, YES, Sounds & Alerts, YES,
Ring Sounds, YES.
3. To listen to your ring signal, press YES.
4. Press YES again to save and name it, or press NO
to continue composing.
To set the ring signal volume
1. Scroll to Settings, YES, Sounds & Alerts, YES,
Ring Volume, YES.
2. Press
3. Press YES to save the setting.
or
to decrease or increase the volume.
Exchanging ring signals and melodies
You can send and receive a sound, ring signal or
melody via IR, text messages, or download it via WAP.
To send a ring signal or melody in a text message,
To turn the ring signal on or off
Press
and select Turn On Silent or Turn Off Silent.
or press and hold
from standby
All signals except the alarm signal are turned off.
Note: You cannot exchange a polyphonic melody
via text messages.
To compose your own ring signal
You can compose up to ten personal ring signals.
To send a melody
1. Scroll to Fun & Games, YES, My Sounds, YES.
Options available when composing a ring signal are:
2. Select a melody and press
3. Select Send, YES.
.
•
Press a key to enter a note. Press and hold the key
to make it a long note.
4. Select a transfer method.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
17
To receive a sound or melody via Infrared
To set the vibrating alert
1. From standby, press , scroll to Activate IR, YES. 1. Scroll to Settings, YES, Sounds & Alerts, YES,
2. When you receive the sound or melody, press YES
Vibrating Alert, YES.
to save it in My Sounds.
2. Select the setting you want, YES.
Increasing Ring
Menu language
You can choose a ring signal that rises in steps from
the lowest volume to the highest, or you can choose
a ring signal with constant volume.
Most SIM cards automatically set the menu language
to the language of the country where you bought
your SIM card. If this is not the case, the preset
language is English.
To turn increasing ring On or Off
Scroll to Settings, YES, Sounds & Alerts, YES,
Increasing Ring, YES.
Note: You can always choose Automatic by pressing
8888
in standby. You can always choose
0000 in standby.
English by pressing
Sounds & Alerts
You can choose to be notified of an incoming call
by the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to On, On If Silent or Off.
To change the menu language
1. Scroll to Settings, YES, Language, YES, Menus, YES.
2. Select a language, YES.
From Settings/Sounds & Alerts, you can also select:
Display light
•
•
•
Message Alert when messages are received.
Key Sound when using the keypad.
Minute Minder to beep after every minute
during calls.
The display light can be set to Automatic, Off or On.
In automatic mode, the display light is turned off
a few seconds after you press the last key.
Note: If set to On, the display light consumes extra
battery power and reduces standby time.
18
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
To set the display light
Date
Scroll to Settings, YES, Display, YES, Light, YES.
When the phone is in standby, you can always see
today’s date in the main display or you can press one
of the volume keys to see the date in the status menu.
To return to standby, wait a few seconds.
To set the display contrast
Scroll to Settings, YES, Display, YES, Contrast, YES.
To set the date
Time settings
Scroll to Settings, YES, Time and Date, YES,
Set Date, YES.
The time is displayed in the external display when
the phone is closed.
You can also see the time in the main display
in standby. The time can be displayed in a 12-hour
or a 24-hour clock.
To set the date format
Scroll to Settings, YES, Time and Date, YES,
Date Format, YES.
Note: If you select the 12-hour clock, you can
alternate between am and pm by pressing
when setting the time.
Advanced time settings
Under Advanced in the Settings/
Time and Date menu, you can set time zone
and daylight saving time. Modyfying these
settings changes the time accordingly if
your network operator supports this service.
When your phone changes network and the time
sent out from the network operator deviates from
the time in your phone, you are asked whether
you want to update the time if you have turned
on Auto Time Zone. If you press YES, the time
is updated automatically.
To set the time
Scroll to Settings, YES, Time and Date, YES,
Set Time, YES.
To set the time format
Scroll to Settings, YES, Time and Date, YES,
Time Format, YES.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
19
Note: Contact your network operator for more
My shortcuts
information.
You can place your favorite functions that you want
to reach quickly and easily in the My Shortcuts menu.
Answering mode
When using a portable handsfree kit, you can choose
to answer a call by opening the phone, pressing any
key (except the NO key), or setting the phone to
answer the call automatically.
To reach a shortcut from standby
Press
to enter the first shortcut in My Shortcuts.
To add a function to my shortcuts
1. Scroll to My Shortcuts, YES, Edit Shortcuts, YES.
2. Select a function from the list by pressing
3. Enter the position number you want for this function
in your menu and press YES.
To select answering mode
Scroll to Settings, YES, Handsfree, YES,
Answering Mode, YES.
.
4. Press YES to save and exit the list.
Phone functions
You can answer a call by opening the phone.
Profiles
Your phone has a number of preset profiles which
are set to suit a certain environment. You can rename,
change, or add accessories to the profiles. For example,
when you go to a meeting you can simply choose the
Meeting profile and a number of settings are changed,
such as the ring signal is turned off. You can reset all
profile settings to the default or the way they were
set when you bought your phone: for example
Normal.
To set the phone functions
1. Scroll to Settings, YES, Flip functions, YES.
2. Select Answer call or Off.
My phone numbers
You can check your own phone number(s).
To check your phone number
Scroll to Phonebook, YES, Special Numbers, YES,
My Numbers, YES. If your number is not saved
on your SIM card, you can enter it yourself.
20
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
Accessories may change the selected profile
in your phone automatically. For example, when
using a portable handsfree the profile switches
from Normal to Port H-free. The profile should
automatically change back when the accessory
is disconnected.
Master reset
You can reset all the settings in the phone to the way
they were when you bought your phone by selecting
Reset Settings.
If you also want to delete all phonebook entries,
messages and other personal data, select Reset All
instead.
To select a profile
Scroll to Settings, YES, Profiles, YES,
Select Profile, YES.
Note: If you select Reset All, content such as melodies
and pictures that you have downloaded, received
or edited is also deleted.
To change a profile setting
1. Scroll to Settings, YES, Profiles, YES,
Edit Profile, YES.
To reset the phone
1. Scroll to Settings, YES, Master Reset, YES.
2. Select Reset Settings or Reset All, YES.
2. Select a setting, YES.
3. Change the profile settings and press YES to confirm. 3. Press YES to continue.
4. Enter the phone lock code (0000 or the new code
To rename a profile
if you have changed it) and press YES.
Scroll to Settings, YES, Profiles, YES, Edit Profile,
YES, Profile name:, YES.
The infrared (IR) port
The infrared port can be used to transfer and
exchange information with another device equipped
When used with certain functions, such as sending
a picture, IR is automatically activated for a shot while.
To reset all profiles
Scroll to Settings, YES, Profiles, YES,
Reset Profiles, YES.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
21
Note: Infrared ports must be facing each other
at a distance of 20 to 30 cm (7.9 to 11.8 Inches)
when used.
Calling
Using the phonebook, call options
The infrared port can be activated in the
following ways:
Making calls
Before you can make or receive any calls, you must
turn on the phone and be within range of a network.
•
•
Press
from standby, scroll to Activate IR, YES.
Scroll to Connect, YES, Infrared Port, YES, select
an option, YES.
•
When selecting a transfer method, for example,
for sending a picture.
Tip: You can call numbers from the call list and
To turn infrared off
Scroll to Connect, YES, Infrared Port, YES, Off, YES.
To make a call
1. Enter the area code and the phone number, and press
YES to make the call.
During calls
You can increase or decrease the speaker volume
during a call. The microphone must be turned on
to change the speaker volume during a call.
22
Calling
This is the Internet version of the user's guide. © Print only for private use.
To change the speaker volume
International calls
Press the volume keys to change the speaker volume.
It is useful to enter the + sign and country code
for all numbers in the phonebook as they can then
be easily used whether home or abroad.
To turn off the microphone during a call
1. Press and hold
until the display shows Muted.
2. Press again to resume the conversation.
To make international calls
1. Press and hold
until a + sign appears in the
Automatic redialing
Automatic redialing is available for all calls except
data calls.
display. The + replaces the international prefix
number of the country from which you are calling.
2. Enter the country code, area code (without the
leading zero) and phone number, YES.
Note: Do not hold the phone to your ear while
waiting. When the call is connected, the phone
gives a loud signal.
Emergency calls
Your phone supports international
emergency numbers such as 112, 911,
and 08. This means that these numbers can
normally be used to make an emergency
call in any country, with or without a SIM card
inserted, if a GSM network is within range.
The phone re-dials the number up to ten times or until:
•
•
•
the call is connected
you receive a call
you press a key.
To re-dial a number
If the connection of the call failed and the display
shows Retry?, press YES.
Note: Some network operators may require that
a SIM card be inserted, or in some cases, that
a correct PIN be entered, in order to make
an emergency call.
Calling
23
This is the Internet version of the user's guide. © Print only for private use.
In some countries, other emergency numbers may
also be promoted. Your operator may therefore have
saved additional local emergency numbers on the
SIM card.
To answer a call
•
•
Open the phone and press YES.
Open the phone (if the phone function Answer call
If the phone is already open, press YES.
•
To make an emergency call
Enter, for example, 112 (the international emergency
number), YES.
To reject a call
•
•
•
Close the phone.
Press NO.
Quickly press a volume key twice.
To view your local emergency numbers
Scroll to Phonebook, YES, Special Numbers, YES,
Emergency Nos., YES.
Missed calls
If you have missed a call, Missed calls:1 appears
in the external display and in the main display,
indicating the number of missed calls.
The most recent missed call is first on the call list,
and the oldest call is last. Scroll to select and show
the time if the call occurred on the same day. Otherwise,
only the date appears for older missed calls.
Receiving calls
If your subscription includes the Caller ID service
and the caller’s number is identified, the number
appears in the external display when the phone
is closed. If you have saved the number in your
phonebook, the name and number appear.
If the number is a restricted number, Withheld
appears.
To check your missed calls
Answer or reject calls
1. When Missed calls: 1 is displayed, open the phone
and press YES to display the missed calls.
2. To call a number from the list, scroll to the
number, YES.
If you receive a call when the phone is closed, the phone
rings and a phone icon appears in the external display.
If the phone is open, Answer? appears in the main
display.
24
Calling
This is the Internet version of the user's guide. © Print only for private use.
Call list
Saving a number
The numbers of the last calls that you have made or
received are saved in the call list. If your subscription
includes the Calling Line Identification service and
the caller’s number is identified, you will also find
the numbers of answered and missed calls in the
call list.
When you want to save a phone number, you use the
Add Number function in the phonebook menu. If you
have already made and received calls, you can find
these numbers in the Add numbers list.
Every phone number you save also gets a position
number. If you want to, you can choose to sort your
phonebook entries according to their position number
instead of the name.
To call a number from the call list
1. To enter the call list, press YES from standby.
2. Scroll to the number you want to call, YES.
If you intend to use your phone both at home and
abroad, it is a good idea to save all phone numbers
as international phone numbers, i.e. with the + sign,
followed by the country code, the area code and
To clear the call list
Scroll to Calls, YES, Options, YES, Clear Call List, YES.
the phone number. Press and hold
the + sign.
to enter
To turn the call list on or off
Scroll to Calls, YES, Options, YES, Call Listing, YES.
To save a number together with a name
1. Scroll to Phonebook, YES, Add Number, YES.
2. Select Add New or any of the numbers from the list
by pressing YES.
3. Enter the phone number that you want to save and
press YES.
Phonebook
Your phone has a phonebook in which you can save
numbers and accompanying names (an entry).
This means that you can retrieve a number from
the phonebook instead of entering the number again.
Calling
25
This is the Internet version of the user's guide. © Print only for private use.
4. Enter a name that you want to associate with the
phone number and press YES. See “Entering letters
Calling a number saved in the phonebook
You use the Find and Call function to call a number
that you have saved in the phonebook.
5. Press YES again to save the entry in the suggested
position.
To call a number saved in the phonebook
1. Scroll to Phonebook, YES, Find and call, YES.
2. Enter the name or the first few letters of the name
(sort order by name) associated with the number that
you want to call and press YES.
Pictures and personal rings
You can add a picture to a phonebook entry.
If your subscription includes the Caller-
ID (CID) service, you can assign a personal
ring signal to a caller.
3. If the name displayed is not the one you want, press
or
until you find the correct name and number.
4. Press YES to make the call.
To add a picture to a phonebook entry
1. Scroll to Phonebook, YES, Picture, YES.
2. Select Add New, press YES.
3. Press YES to go to the phonebook, YES.
4. This takes you to Picture. Select a picture
and press YES.
Speed dialing
You can call the phone numbers that you have saved
in positions 1–9 by entering the position number in
standby, and then pressing YES.
Example:
Press
To add a ring signal to a phonebook entry
1. Scroll to Phonebook, YES, Personal Rings, YES.
2. Select Add New, press YES.
and then YES.
Shortcuts to phonebook entries
When in standby, you can find an entry of the keys
3. Press
to go to the phonebook, YES.
4. This takes you to Personal Rings. Select a ring
–
to find an entry beginning with the first
signal and press YES.
letter on that key, or the closest following.
26
Calling
This is the Internet version of the user's guide. © Print only for private use.
Example:
To edit an entry
Press and hold
beginning with the letter “G” (or the closest
following). Then scroll up or down, using
When you find the entry you want, press YES to
make the call.
to get to the first entry
1. Scroll to Phonebook, YES, Find and Edit, YES.
2. Enter the name (or the first few letters) for the
entry that you wish to edit and press YES.
3. Press YES to select the entry.
or
.
4. Select Edit and press YES.
5. When you have finished editing, press YES to save
your changes.
Ask to save
If Ask to Save is on, you are asked if you want
to save any called or answered number that is not
already saved in your phonebook.
To delete an entry from the phonebook
1. Scroll to Phonebook, YES, Find and Edit, YES.
2. Enter the name (or the first few letters) for the entry
that you wish to delete and press YES.
When the entry you want to delete is highlighted,
press YES.
Note: Your subscription must include the Caller ID
service if you want to save answered numbers.
3. Press YES to confirm.
To turn the Ask to Save function on or off
1. Scroll to Phonebook, YES, Options, YES,
Ask to Save, YES.
Sort order
You may change the sort order of your phonebook
entries, so that they are sorted according to their
position number instead of the name. This means
that you search for the position number when you
use the Find and Call or the Find and Edit
functions.
2. Select On or Off and press YES.
Keeping the phonebook up to date
You can change and delete names and numbers
from the phonebook.
Calling
27
This is the Internet version of the user's guide. © Print only for private use.
To choose a sort order
1. Scroll to Phonebook, YES, Options, YES,
Sort Order, YES.
•
•
To save the number in another position, press
to delete the position number, enter a new
position number and press YES.
To save the number in the phone memory, you
first need to know how many positions you have
got on your SIM card. You can check this in the
Memory Status menu, see page 28. If, for example,
you have 200 positions on your SIM card, you can
enter position number 201 to save a number in the
first position of the phone memory.
2. Select a sort order and press YES.
Phonebook memories
Your phonebook entries are saved in the memory
on your SIM card. The number of entries you can
save depends on your SIM card. By saving your
entries on the SIM card, you still have access to
them if you use the card with another phone.
You can also save your entries in the phone
memory. The phone memory holds a number of
positions in which your entries are saved when all
SIM positions are occupied. If you save your entries
in the phone memory, you still have access to them if
you use another SIM card with your phone.
Replacing entries
If you try to save a phone number in a position which
already contains a phone number, the message
Overwrite? appears together with the name saved
in that position. You now have two options:
•
•
Press YES to replace the number with the new one.
Press NO if you do not want to replace the old
number. Enter a new position and press YES.
Choosing where to save an entry
When you save an entry and are asked to enter the
position number, you can do the following:
Checking the status of the memory
You can check how many memory positions you
have in your memories and how many of them you
have used.
•
To save the number in the first empty position
suggested, press YES.
28
Calling
This is the Internet version of the user's guide. © Print only for private use.
To check the status of the memories
Scroll to Phonebook, YES, Memory Status, YES.
If you have saved entries in the phone memory,
you can delete them.
Groups
You can create a group of phonebook entries. You
can then send a text message to all members of that
To delete all entries from the phone memory
1. Scroll to Phonebook, YES, Options, YES,
Delete all?, YES.
To create a new group
1. Scroll to Phonebook, YES, Groups, YES,
Add group?, YES.
2. Press YES again. If you delete all entries from the phone
memory, the entries on your SIM card are not deleted. 2. Enter a name for the group and press YES.
3. Scroll to Add New and press YES.
Copy phonebook entries
4. Select an entry in your phonebook and press YES.
5. To add the next member, repeat steps 3 and 4.
6. Press NO to leave the menu.
You can copy the phonebook entries between your
phone’s memory and the SIM card. The number
of entries that can be saved depends on the type
of SIM card.
To add a member to an existing group
Select the group you want and then select Edit, YES,
Add New, YES.
To copy entries to the SIM card
Scroll to Phonebook, YES, Options, YES,
Copy to SIM.
Voice mail
If your subscription includes an answering
service, callers can leave a voice mail
message when you cannot answer a call.
To copy entries to the phone
Scroll to Phonebook, YES, Options, YES,
Copy from SIM.
Calling
29
This is the Internet version of the user's guide. © Print only for private use.
Receiving a voice mail message
Call cost
Depending on your network operator, you are
informed that someone has left a message by
a text message or by a voice mail indication.
For cost information you need to verify
with your network operator or service
provider whether you can subscribe to such
a service where call cost (or the number
of call units) is displayed.
Calling your voice mail service
You can easily call your voice mail service
by pressing and holding
, if you have saved
Cost information
your voice mail number in the phone. You get the
number from your service provider.
If you have a subscription with a cost information
service, you can check the cost of your last call
and the total cost of your calls.
To enter a voice mail number
Scroll to Messages, YES, Options, YES,
Voicemail No., YES.
Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Call time
To check the call cost and reset cost meter
During a call, the duration of the call is shown
in the display.
•
Scroll to Calls, YES, Time & Cost, YES, Call Costs
and select an option, YES.
You can check the duration of your last call,
outgoing calls and the total time.
•
Select Clear Total Cost to reset the call cost
meter.
To check the call time and reset timer
Setting the call cost
•
Scroll to Calls, YES, Time & Cost, YES,
Call Timers and select an option, YES.
Select Reset Timers to reset the call time meter.
You can use the rate function to specify the price per
call unit. If you do not specify a price per call unit,
the number of call units is displayed.
•
30
Calling
This is the Internet version of the user's guide. © Print only for private use.
To enter the price per call unit
1. Scroll to Calls, YES, Time & Cost, YES, Call Costs,
YES, Set Rate, YES.
2. Enter your PIN2, YES.
3. Select Change Rate, YES.
Forwarding calls
If you cannot answer incoming voice or
data calls, you can forward them to another
number, for example your answering
service.
4. Enter the code for the currency you want
(for example USD for US Dollars), YES.
5. Enter the price per call unit, YES.
Note: When the Restrict Calls function is on,
some Forward Calls options cannot be activated.
To enter a decimal point, press
.
For voice calls, you can choose between the
following forward alternatives:
Credit limit for calls
You can enter a total amount of money
that can be used for making calls. When
the amount reaches zero, no more calls
can be made. Please note that the credit
limit is only an estimated value.
•
•
Always Forward – forward all voice calls.
When Busy – forward calls if you are already
on the phone.
Not Reachable – forward calls if your phone
is turned off or if you are unreachable.
No Reply – forward calls that you do not
answer within a specified time limit
(operator-dependent).
•
•
To set a credit limit
1. Scroll to Calls, YES, Time & Cost, YES, Call Costs,
YES, Set Credit, YES.
2. Enter your PIN2, YES.
3. Select Change, YES.
4. Enter an amount, YES.
See “Security” on page 54 for more information
about PIN2.
To turn on a call forward
1. Scroll to Calls, YES, Manage Calls, YES,
Forward Calls, YES.
2. Select a call category and then a forward
alternative, YES.
Calling
31
This is the Internet version of the user's guide. © Print only for private use.
3. Select Activate, YES.
Note: During a call the Ongoing Call menu replaces
4. Enter the phone number to which you want your
calls to be forwarded and press YES, or retrieve it
from the phonebook.
the Calls menu.
Call waiting service
If the call waiting service is activated, you hear a beep
in the earpiece if you receive a second call during an
ongoing call.
To turn off a call forward
Select a forward alternative and select Cancel.
To activate or deactivate the call waiting service
Scroll to Calls, YES, Manage Calls, YES,
Call Waiting, YES.
To check status
1. Scroll to Calls, YES, Manage Calls, YES,
Forward Calls, YES.
2. Select a call type, YES.
3. Scroll to the forward you want to check, YES.
Select Get Status, YES.
To make a second call
1. Press YES to put the ongoing call on hold. You can
only put one call on hold.
2. Enter the number you want to call and press YES,
or retrieve a number from the phonebook. You can
To check the status of all call forwards
Select Check All in the Forward Calls menu.
also reach different options by pressing
.
More than one call
You can handle more than one call
To receive a second call
•
•
•
To answer the second call and put the ongoing call
on hold, press YES.
To reject the second call and continue the ongoing
call, select Busy.
To answer the second call and to end the ongoing
call, select Release & Answ.
simultaneously. For example, you can
put an ongoing call on hold, while you
make or answer a second call, and then
switch between the two calls. You cannot answer
a third call without ending one of the first two calls.
32
Calling
This is the Internet version of the user's guide. © Print only for private use.
Handling two calls
To join the two calls into a conference call
When you have one ongoing call and one call on hold,
you can do the following:
Scroll to Ongoing Call, YES, Join Calls, YES.
•
•
Press YES to switch between the two calls.
Press and select Join Calls to join the two
calls into a conference call.
To add a new participant
1. Press YES to put the conference call on hold.
2. Call the next person you wish to include in the
conference call.
•
•
•
Press
and select Transfer Call to connect the
two calls. You are disconnected from both calls.
Press NO to end the ongoing call, then press YES
to retrieve the held call.
3. Press
, select Join Calls, YES.
Repeat steps 1 to 3 to include more participants.
Press NO twice to end both calls.
To release a participant
1. Press
, select Release Party, YES.
Conference calls
2. Select the participant, YES.
You can have a joint conversation
(conference call) with up to five people.
You can also put a conference on hold
and make another call.
To end the conference call
Press NO.
Having a private conversation
Note: There may be additional charges for calls
involving multiple parties. Contact your service
provider for more information.
You can have a private conversation with one of the
participants and put the other participants on hold.
To start a private conversation
Creating a conference call
1. Press
, then select Extract Part to select
To create a conference call, you must first have one
ongoing call and one call on hold.
the participant that you want to talk with.
2. Select Join Calls to resume the conference call.
Calling
33
This is the Internet version of the user's guide. © Print only for private use.
Restricted dialing
Fixed dialing
You can use the restrict calls service to
restrict outgoing and incoming calls. This
may be useful, for example, when you
are abroad. To use this service, you need
a password which you get from your service
provider.
The fixed dialing function allows calls to be
made only to certain numbers saved on the
SIM card.
Note: Calls to international emergency numbers
can still be made even when the fixed dialing
function is on.
Note: If you forward incoming calls, you cannot
activate some Restrict Calls options.
Fixed dialing requires a SIM card that allows
fixed numbers to be saved. The fixed numbers
are protected by your PIN2.
You can save partial numbers or numbers with
question marks.
The following calls can be restricted:
•
•
•
All Outgoing – All outgoing calls.
Outgoing Intl. – All outgoing international calls.
Outg. Intl. Roam – All outgoing international
calls except to your home country.
•
Partial numbers: Saving 0123456 allows calls
to be made to all numbers starting with 0123456.
Numbers with question marks: Saving 01234567?0,
allows calls to be made to numbers from
0123456700 to 0123456790. To enter
•
•
All Incoming – All incoming calls.
Inc. when Roam – All incoming calls when you
are abroad (when roaming).
•
a question mark, press and hold
.
To turn a call restriction on or off
1. Scroll to Calls, YES, Manage Calls, YES,
Restrict Calls, YES.
To turn fixed dialing on or off
1. Scroll to Phonebook, YES, Options, YES,
Fixed Dialing, YES.
2. Select an option, YES.
3. Select Activate or Cancel, YES.
4. Enter your PIN, YES.
2. Enter your PIN2, YES.
3. Select On or Off, YES.
34
Calling
This is the Internet version of the user's guide. © Print only for private use.
To save a fixed number
To call outside a Closed User Group
1. Scroll to Phonebook, YES, Special Numbers, YES,
Fixed Numbers, YES.
Select Open Calls and then select On.
2. Select Add New and enter the number.
Accept calls
With the accept calls service, you can choose to
receive calls only from certain numbers. Other calls
are automatically rejected by a busy tone. The phone
numbers of calls you have rejected are saved in the
Call List.
Closed user groups
The Closed User Group function is a way of lowering
call costs. On some networks it is cheaper to make
calls within a call group. You can save ten groups.
To add numbers to the accepted callers list
1. Scroll to Calls, YES, Manage Calls, YES,
Accept Calls, YES, Accepted List, YES.
2. Scroll to Add New, YES.
3. Select an option, YES.
4. Select an entry, YES.
To add a group
1. Scroll to Calls, YES, Manage Calls, YES,
Closed Groups, YES, Edit List, YES.
2. Scroll to Add New, YES.
3. Enter the name of the user group, YES.
4. Enter the index number, YES. You get the index
number from your operator.
To select an accept option
Scroll to Calls, YES, Manage Calls, YES,
Accept Calls, YES, Accept Options, YES.
To activate a group
1. Scroll to Calls, YES, Manage Calls, YES,
Closed Groups, YES, Edit List, YES.
2. Select a group, YES.
Networks
When you turn on the phone it automatically
selects your home network if this is within
range. If it is not within range, you may use
another network. This is called roaming.
3. Select Activate, YES. Calls can only be made within
the selected group.
Calling
35
This is the Internet version of the user's guide. © Print only for private use.
Additional calling functions
To show or hide your phone number
1. Enter the phone number you want to call.
Tone signals
2. Press
or scroll to Calls, YES, Next Call, YES.
You can use telephone banking services or
control an answering machine by sending
tone signals (also known as DTMF tones
or touch tones) during a call.
3. Select Hide My Number or Show MyNumber and
press YES to make the call.
To send and clear tones
•
•
Press the number keys 0-9,
To clear the display after a call, press NO.
and
.
Notepad
You can use the phone to make note of a number
during a call. When you press the number keys, the
person you are talking to hears tone signals. To turn
these tone signals off during the call, press
,
select Turn Off Tones, YES. When you end the call,
the number remains in the display. You can then call
the number by pressing YES.
Showing or hiding your number
If your subscription supports the Caller
ID Restriction service, you can hide your
phone number when making a call.
36
Calling
This is the Internet version of the user's guide. © Print only for private use.
Request settings from Sony Ericsson
your region and then use the Configurators to
request that a text message be sent to your phone
with the settings you need.
Setting up WAP
WAP browser
Requirements
In order to use the Internet or browse via
WAP services, the following are required:
To install settings
•
•
A phone subscription that supports data
transmission.
When the message arrives, New settings received.
Install? appears:
Settings entered in your phone. Settings may
already be entered when you buy your phone
or you can receive settings in a text message from
your network operator or service provider. You
can also find settings at www.SonyEricsson.com.
You may also have to register as a WAP user with
your service provider or network operator.
•
Press YES to install the new settings. If settings
already exist in your phone you can either keep
•
Press NO to cancel installation.
•
Set up with the wizard
Receiving settings in a text message
Your GSM network operator or Internet service
provider may be able to send the required data
account and WAP settings direct to your phone
in a text message (SMS).
If your phone is not set up for WAP, you can ask
your network operator or service provider to provide
you with WAP settings information. Then you can
simply use the wizard in your phone to help guide
you through the relevant settings.
Setting up WAP
37
This is the Internet version of the user's guide. © Print only for private use.
To use the wizard for setting up WAP
1. Scroll to WAP Services, YES, homepage (for example
Sony Ericsson), YES. The wizard now starts if no WAP
settings exist.
2. Enter and save settings when asked, press YES
to confirm.
Data account settings
You can have several data accounts saved
in your phone with different settings for
different purposes. The main setting for
a data account is the Account Type
(connection method).
Advanced setting information
Tip: If there are no data account or WAP profile
settings in your phone, you can enter data account
settings when you enter WAP profile settings.
Some advanced settings that are described in the
following texts may not be mandatory, please
consult your network operator or service provider
for more information.
You can choose from GPRS Data or GSM Data
account types. If you want to change access type,
you have to create a new data account and select
the access type you want to use.
A data account includes connection settings
for access to a server at your service provider,
for example via WAP or via email.
A WAP profile includes user settings that
allow WAP browsing.
Note: Please contact your network operator
for charging details.
To use the WAP browser, via a WAP service
provider, you need settings for a specific data
account for WAP, and a WAP profile.
To send a text message (SMS) to an email address
via your network operator, you need to set an email
gateway phone number.
GPRS
GPRS (General Packet Radio Service)
allows fast and efficient access where you
can always be online.
Note: You need a subscription that supports GPRS.
38
Setting up WAP
This is the Internet version of the user's guide. © Print only for private use.
GPRS settings that are available:
GSM
•
APN (Access point name address) – the address
of the external data network you want to connect
to, either an IP address or a text string.
User ID – your user id to log on to the external
data network.
Password – your password to log on to the external
data network.
Pwd. Request (Password request) – if this setting
is on, you are asked for a password each time you
log on to the external data network.
Allow Calls (Preferred service) – if you want
to be able to accept incoming calls during
a GPRS session, select Automatic. If not,
select GPRS Only.
IPAddress – the IP address that the phone uses
when communicating with the network. If you
do not enter an address, the network provides
you with a temporary IP address.
GSM settings include some settings that are
similar to GPRS settings and some that are
GSM-specific as follows:
•
•
•
•
•
•
Phone Number – the phone number
of your Internet service provider.
Data Rate – select the speed you want for the
connection.
Dial Type – select analog or ISDN connection.
To create a data account manually
1. Scroll to Connect, YES, Data Comm., YES,
Data Accounts, YES, Add account?, YES.
2. Select an account type for access.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing YES.
5. Scroll to Save?, YES.
•
•
•
•
DNS Address – if the network does not provide
the IP address to the DNS server automatically,
you may enter it here.
Advan. Settings (Advanced settings) – these are
optional. Consult your network operator.
To edit a data account
1. Scroll to Connect, YES, Data Comm., YES,
Data Accounts, YES.
2. Select a data account, YES.
3. Select Edit.
Setting up WAP
39
This is the Internet version of the user's guide. © Print only for private use.
4. Select the setting you want to edit, YES. Edit the
setting, YES.
5. Repeat step 4 for other settings you want to edit.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
Preferred service
You can set GPRS or GSM as the preferred service.
2. Scroll to WAP Services, YES, Options, YES,
WAP Profiles, YES.
3. Select Add profile? to add a new profile or select
an existing profile that you want to edit, YES.
Note: To see the status of GPRS coverage and
connection in standby look at the triangle above
the signal strength indicator. If the triangle is
filled GPRS is available. Otherwise it is not.
To enter information in a new profile
When selecting Add profile? enter a name for the
profile, YES, Connect using:, YES, select the data
account to be used, YES and enter the IP address:,
YES. A list appears. Scroll to Save?, YES.
To select preferred mode
Scroll to Connect, YES, Data Comm., YES,
Pref. Service, YES, and select GPRS and GSM
or GSM Only.
To edit an existing profile
When selecting an existing profile, you can do the
following:
WAP profile settings
The WAP settings are stored in a WAP profile.
In most cases you only need to use one profile
to access the Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites such
as a banking site or a corporate intranet. You then
simply switch between profiles when you need
to change the network connection.
•
•
•
•
•
Rename – Change the name of the profile.
Connect Using – Select data account.
IPAddress – WAP gateway server address.
Advanced – More profile settings, see below.
Delete – Remove the profile.
40
Setting up WAP
This is the Internet version of the user's guide. © Print only for private use.
To use advanced profile settings
If you select Advanced you can do the following:
To turn on a secure connection
1. Scroll to WAP Services, YES, Options, YES,
WAP Profiles, YES.
2. Select the profile to be used, YES.
3. Select Advanced, YES, Security, YES.
4. Select On, YES.
•
•
•
•
Chg. Homepage – Enter the address of the WAP
site you want as the homepage.
Second Account – Select an alternative data
account if the first in Connect Using fails.
User ID – Enter your user id for the WAP
gateway.
Trusted certificates
Password – Enter your password for the WAP
gateway.
To establish a secure connection when using certain
WAP services, for example banking or WAP shopping,
you need certificates in your phone.
•
•
Security – See WAP security settings.
Show Pictures – View pictures while browsing.
The different types of certificates are as follows:
WAP security settings
•
Server certificates are used to identify a WAP
gateway to the phone and to show that it is
certified by a trusted authority. The server
Your phone has support for WAP secure
browsing. Security for a connection
between a WAP gateway and a WAP
service provider is the responsibility
of the WAP service provider.
certificate is checked against trusted certificates
that are stored in the phone. If the phone cannot
verify the identity of a server, you are given the
options to terminate or continue the connection.
Trusted certificates are used to verify the WAP
gateway that you are trying to connect to. Your
phone may already contain trusted certificates
when you buy it.You can also download trusted
certificates from Sony Ericsson or other WAP pages.
Turning on security
When you turn on security, the connection between
your phone and the WAP gateway is secure.
•
Setting up WAP
41
This is the Internet version of the user's guide. © Print only for private use.
To check the certificates in your phone
Scroll to WAP Services, YES, Options, YES, Common,
YES, Security, YES, Trusted Certif., YES.
Messaging
Text messaging
•
Service numbers
The number to your service center is
provided by your operator. If the number
to your service center is not saved on your
SIM card, you must specify the number
yourself. Otherwise you cannot reply to
received messages or send your own messages.
Your phone also features enhanced messaging
services (EMS) that allow you to add pictures,
animations, sounds and melodies to text messages.
To check the number to your service center
1. Scroll to Messages, YES, Options, YES,
Service Centers, YES. If no number is found,
select Add New and press YES.
2. Enter the number, including the international + sign
and country code, and press YES.
42
Messaging
This is the Internet version of the user's guide. © Print only for private use.
Text messages (SMS)
Sending a text message to a group
You can send text messages to groups that you
have specified and saved in your phonebook, see
group member.
You can use the Short Message Service (SMS)
to send and receive text messages consisting
of up to 160 characters.
Note: Some language-specific characters use
more space. Turn off National Char. to save space.
To send a text message to a group
1. Scroll to Messages, YES, Write New, YES.
2. Enter your message and press YES.
3. Press , select Groups and press YES.
4. Select a group and press YES.
To send a text message
1. Scroll to Messages, YES, Write New, YES.
3. Enter the recipient’s phone number or retrieve
it from the phonebook by pressing
Text formatting
You can change the style, size and alignment
of the text in a text message.
.
4. Press YES to send the message.
To format the text in a text message
1. Scroll to Messages, YES, Write New, YES.
2. Write the text message.
To insert an item in a text message
1. Scroll to Messages, YES, Write New, YES.
2. While writing your message press
the option menu.
3. Select Add Symbol or Insert Item, YES.
4. Select Picture, Sound, Melody or
Animation, YES.
to enter
3. Press
.
4. Select Text Format, YES. Then select Text Size,
Text Style or Alignment, YES. Select a format
and press YES.
5. Select an object or symbol, YES. Then press YES
again to confirm.
Messaging
43
This is the Internet version of the user's guide. © Print only for private use.
Long messages
•
•
Request Reply – Include a reply request if you
want the recipient of your message to reply.
Status Request – Verify whether a message has
been delivered.
A text message can contain up to 160 characters.
You can send a longer message by linking two or
more messages. Please note that you are charged
for the number of linked messages.
To set a default message option
1. Scroll to Messages, YES, Options, YES.
2. Select SMS Type, Validity Period, Request Reply,
or Status Request, YES.
To turn long messages on
Scroll to Messages, YES, Options, YES,
Long Messages, YES, On, YES.
3. Select an option from the list, YES.
Message options
You can set a default value for the message options
below, or you can turn on the Set on Send option
which means that you choose the settings each time
you send a message.
To turn set on send on or off
Repeat steps 1 and 2 above, then select
Set on Send, YES.
•
•
SMS Type – The phone supports different types
of messages. Your service provider may offer the
facility of converting a text message into a format
(email, for example) that suits the equipment that
is going to receive the message.
Validity Period – If your message cannot be
delivered, for example, if the recipient has turned
off the phone, your service center can save the
message to send it later.
Templates
If you have one or more messages that you send
often, you can save these as templates. You can save
20 templates consisting of up to 60 characters each.
Your phone may come with a set of templates that
your operator or service provider has prepared for
you. These templates appear in the list of templates,
indicated by an icon.
44
Messaging
This is the Internet version of the user's guide. © Print only for private use.
To create a template
1. Scroll to Messages, YES, Templates, YES,
Add New, YES.
2. Enter the message and press YES to save the
template.
Receiving a message
When you receive a message, the phone beeps and
the message New Messages appears in the display.
If the sender of the message wants you to reply,
the message Reply requested. Reply? appears in the
display. Press YES again to reply. If you do not want
to reply, press NO.
To use a template
Select a template from the Templates list in the
Messages menu, and proceed as described in
To read the message now
1. Press YES.
2. Use the navigation key to scroll through the message.
When you have read the message, press YES. A new
menu with different options appears. These options
are described on the following pages.
Message counter
You can check the number of text messages that
you have sent.
To check the number of sent messages
Scroll to Calls, YES, Time & Cost, YES,
SMS Counter, YES, Show Counter.
To read the message later
Press NO to save the message in your Inbox in the
Messages menu.
To reset the message counter
Scroll to Calls, YES, Time & Cost, YES,
SMS Counter, YES, Reset Counter.
To reply to a message
1. When you have read the message, press YES.
2. Select Reply in the option list and press YES.
Messaging
45
This is the Internet version of the user's guide. © Print only for private use.
3. Select the message you want to send as a reply
and press YES. You can choose between: Write New,
Include This Msg. or Templates.
Saving incoming messages
Incoming messages are saved in the phone memory.
When both the phone memory and the SIM memory
are full, a flashing envelope in the display indicates
that you have to empty the inbox to be able to receive
new messages.
4. Write your message and press YES.
To forward a message
1. When you have read the message, press YES.
2. Select Forward and press YES.
Continue in the same way as when sending a new
text message.
If the phone memory becomes full of unread
messages, new messages are automatically saved
on the SIM card. Messages that are saved on the
SIM card remain there until you delete them.
To call a phone number found in a message
When the number is highlighted, press YES.
To save a message on the SIM card
1. When you have read the message, press YES.
2. Select Save on SIM and press YES.
To call the sender of the message
1. When you have read the message, press YES.
2. Select Call and press YES.
Area information
The ordinary Short Message Service is a
personal service that carries your private
messages. Area Information is another
type of text message that is sent to all
subscribers in a certain network area.
This information could, for example, be a local
traffic report or the phone number of a local taxi
company.
To read the next message
1. When you have read the message, press YES.
2. Select Read Next and press YES.
To delete a message
1. When you have read the message, press YES.
2. Select Delete and press YES.
46
Messaging
This is the Internet version of the user's guide. © Print only for private use.
Area information usage
Cell information
Please refer to the information provided by your
operator for more information about the area
information codes.
The “Cell information channel” is used
by some network operators for sending
messages to their subscribers within a
certain network area. You read messages
on the Cell information channel in the same
way as when reading area messages.
To turn area information on or off
1. Scroll to Messages, YES, Area Info., YES, Reception.
2. Select On or Off and press YES.
To turn the Cell information channel on
Scroll to Messages, YES, Area Info., YES,
Cell Information, YES and then select On.
To enter an area information code
1. Scroll to Messages, YES, Area Info., YES,
Message List, YES, Add New, YES.
2. Enter the new code and press YES.
Receiving an area message
When you receive an Area Information message,
the message automatically appears in the display.
You read the message in the same way as you read
an ordinary text message. You cannot save area
messages. When you have read the message and
press YES or NO, it is deleted.
Messaging
47
This is the Internet version of the user's guide. © Print only for private use.
To start browsing
Using WAP
WAP browser, bookmarks
First select the WAP profile you want to use.
Scroll to WAP Services, YES, Select Profile, YES.
Then select one of the following:
Your phone has a WAP (Wireless
•
•
•
Open your homepage, for example,
Sony Ericsson.
Go to one of your bookmarks. Select
Bookmarks, YES.
Enter the address of a WAP site. Select
Enter Address, YES, New address? to enter
a new WAP address or select one of the 10 most
recently entered addresses. When you enter a
needed.
Application Protocol) browser which
is designed to bring a modified Internet
to your mobile phone. A wide range of
services are available, for example, news,
entertainment, timetables, reservations, banking,
e-commerce, positioning and email.
Before you start
First make sure that you have:
•
•
•
A phone subscription that supports data
transmission.
Correct settings in your phone for WAP.
Registered as a WAP user with your network
operator or service provider.
To exit WAP and disconnect
•
•
Press and hold NO or
Press , select Exit.
Options when browsing
When you have started browsing, you can reach
Using the WAP browser
different browsing options by pressing
.
Settings may already be entered when you buy the
phone. Otherwise you can receive the settings from
your network operator or your service provider in a
text message.
The options menu is dynamic. Its content may
vary depending on which WAP site you are visiting.
The options menu contains the following:
48
Using WAP
This is the Internet version of the user's guide. © Print only for private use.
•
•
Go to the homepage set for the current WAP profile.
If you select an email address when browsing
a WAP site, you can reply with a text message.
Bookmarks – Add the site you are currently
browsing to your list of bookmarks, or see the list
of bookmarks for the current profile.
Using bookmarks
You use bookmarks in your mobile phone just as you
do with a PC Internet browser. You can have up to
a maximum of 25 bookmarks.
To work with bookmarks
•
•
Push Inbox – Displays received push messages.
Enter Address – Enter the WAP address of a site
you want to visit.
1. Scroll to WAP Services, YES, Bookmarks, YES.
2. Select the bookmark you want to work with,
Select Go to Bookmark, Edit, Delete, Send via SMS,
.
•
•
Save Picture – Save a picture from the site.
Send via SMS – Send a text message with a link
to the current WAP page to another phone.
Reload – Refresh the contents of the WAP page.
Exit – Disconnect and go to standby.
Status – Display current status information, for
example, profile, access type, connection time,
data rate, security, address.
Set as homepg – Set the current site as the
homepage of the WAP profile you are using.
Edit – Edit the name and/or the WAP address
of the bookmark.
or Set as homepg and press YES.
Downloading
You can download, for example, pictures and ring
signals, from WAP sites directly to your phone.
•
•
•
Note: Make sure the file sizes do not exceed the
on page 55 for more information.
•
•
•
To download from wap.SonyEricsson.com
1. Scroll to WAP Services, YES, Bookmarks, YES,
Sony Ericsson, YES.
Delete – Delete the bookmark.
2. Select what you want to download and follow
the instructions that appear, YES.
Using WAP
49
This is the Internet version of the user's guide. © Print only for private use.
WAP push messages
•
•
Prompt – You allow push messages, but only
when you confirm.
Off – You do not allow push messages.
You can receive push messages via WAP Services.
This means that a service provider sends WAP
content (information) to your phone without
you having to do anything. You can, for example,
get updated news or new WAP settings from your
service provider.
To respond to a push message
Scroll to WAP Services, YES, Push Inbox, YES,
scroll to any push message, YES and select one
of the following:
There are two kinds of push messages:
•
Load – The browser starts and loads the WAP
site so that you can see the push content.
Delete – Deletes the push message.
•
•
Text messages that inform you about WAP services
by sending a link. To go to the WAP service, click
the link and select Load.
Updated information from a WAP service is sent
to appear in the WAP browser.
•
•
Postpone – Save the message to be loaded later.
Stored information
The following information can be saved in your phone:
Receiving a push message
You can set your phone to either accept or reject push
messages. This is valid for all your WAP profiles.
•
•
•
Cache – improves memory efficiency.
Passwords – improves server access efficiency.
Cookies – improves site access efficiency.
To set push message acceptance
Scroll to WAP Services, YES, Options, YES, Common,
YES, Push Access, YES and select one of the following
settings:
It is advisable to clear any sensitive information
about previously visited WAP services. This is to
avoid a security risk if your phone is misplaced,
lost or stolen.
•
On – You allow push messages to be automatically
loaded.
50
Using WAP
This is the Internet version of the user's guide. © Print only for private use.
for more information regarding security and
certificates.
More features
Alarm clock, stopwatch, calculator, calendar, games
To allow WAP information in your phone
1. Scroll to WAP Services, YES, Options, YES,
Common, YES.
Alarm clock
The alarm can be set to ring at a specific time within
24 hours, or recurrently at a specific time on several
days. You can have both these alarms set at the same
time. Even if you have set your phone to silent, the
alarm signals ring. The alarm clock also rings if the
phone is turned off.
2. Select the information to allow, YES.
To clear cache, password list, cookies
or push inbox
1. Scroll to WAP Services, YES, Advanced, YES.
2. Select the information to be cleared.
3. Press YES to confirm.
To set an alarm
1. Scroll to Organizer, YES, Alarms, YES, Alarm
or Recurrent Alarm, YES.
2. Enter the time, YES and day, if recurrent, by scrolling
and pressing
, YES.
To change the alarm time
1. Scroll to Organizer, YES, Alarms, YES, Alarm, YES,
Set New Time, YES.
2. Press any key to turn the alarm signal off when it
rings. If you do not want the alarm to be repeated,
press YES.
More features
51
This is the Internet version of the user's guide. © Print only for private use.
To cancel the alarm
Note: The accuracy of the calculator function
Scroll to Organizer, YES, Alarms, YES, Alarm
or Recurrent Alarm, YES, Cancel, YES.
is limited.
To use the calculator
To select an alarm signal
Scroll to Settings, YES, Sounds & Alerts, YES,
Alarm Signal, YES.
1. Scroll to Organizer, YES, Calculator, YES.
2. Enter digits with the keypad, then press:
or
to get ÷, x, -, +, a decimal point or %.
to delete the figure.
Stopwatch
YES to calculate a result, equals to (=).
to save to memory.
The stopwatch is turned off when you answer an
incoming call or when you exit the stopwatch menu.
to retrieve from memory.
To use the stopwatch
Timer
Scroll to Organizer, YES, Stopwatch, YES, then press:
to reset (when stopped).
The phone has a 24-hour timer.
to save up to nine lap times.
YES to start, stop or restart.
NO to stop.
To set the timer
Scroll to Organizer, YES, Timer, YES. When the
signal rings, press any key to turn it off.
or
to check saved lap times.
Calendar
Calculator
In the calendar you can add tasks for things that
you have to remember. The tasks can be edited
or deleted.
The phone has a built-in calculator which can add,
subtract, divide and multiply.
52
More features
This is the Internet version of the user's guide. © Print only for private use.
To add a task
To delete all tasks
1. Scroll to Organizer, YES, Calendar, YES.
2. Select Add task?, YES.
Scroll to Organizer, YES, Calendar, YES,
Delete All, YES.
3. Enter a description, YES.
4. Enter the start/end dates and times, YES.
5. Scroll to Continue?, YES.
6. Set a reminder, if required, or select None
and press YES to save.
To edit a task
1. When the task is displayed, press YES.
2. Select Edit, YES.
3. Edit the task, YES, edit the date, YES, edit the
reminder, YES.
To set the reminder
Select any of the predefined values or select
Other Reminder, and enter the alarm date, YES
and the alarm time. Press YES to save the task.
Games
Your phone has several entertaining games.
Game controls are specified with help for
each game.
To view a task
1. Scroll to Organizer, YES, Calendar, YES.
2. Select View Today, View All Tasks, View Week,
or View Month. Press YES.
To start a game
1. Scroll to Fun & Games, YES, Games, YES.
2. Select a game, YES.
3. Select New Game or Resume Game, YES.
4. Start the game.
To delete a task
Scroll to the task that you want to delete, press
.
More features
53
This is the Internet version of the user's guide. © Print only for private use.
To unblock your SIM card
1. PIN blocked. appears.
Security
SIM card lock, phone lock
2. Enter your PUK and press YES.
3. Enter a new four- to eight-digit PIN and press YES.
4. Reenter the new PIN to confirm and press YES.
SIM card lock
The SIM card lock protects your subscription,
but not your phone itself, from unauthorized use.
If you change SIM cards, the phone still works with
the new SIM card.
To edit your PIN
Scroll to Settings, YES, Locks, YES, SIM Lock, YES,
Change PIN, YES. If the message Codes do not match.
appears, you entered the new PIN incorrectly. If the
message Wrong PIN. appears, followed by Old PIN:,
you entered your old PIN incorrectly.
PIN and PUK code
Most SIM cards are locked at the time of purchase.
If the SIM card lock is on, you have to enter a “PIN”
(Personal Identity Number) every time you turn on
your phone.
PIN2
Certain services are protected by a second PIN.
As you enter your PIN, the digits are hidden with
an *. However digits are shown if your PIN starts
with the same digits as an emergency number,
for example 112. This is so that you can see and call
an emergency number without entering a PIN. See
If you enter your PIN incorrectly three times in
a row, the SIM card is blocked. This is indicated by
the message PIN blocked. To unblock it you need
to enter your “PUK” (Personal Unblocking Key).
Your PIN and PUK are supplied by your operator.
To edit your PIN2
Scroll to Settings, YES, Locks, YES, SIM Lock, YES,
Change PIN2, YES.
To turn the SIM card lock on or off
1. Scroll to Settings, YES, Locks, YES,
SIM Lock, YES, Protection, YES.
2. Select On or Off, and press YES.
3. Enter your PIN and press YES.
54
Security
This is the Internet version of the user's guide. © Print only for private use.
Phone lock
To set the phone lock
The phone lock protects the phone against
unauthorized use if it is stolen and the SIM card
is exchanged. It is not on when you buy the phone.
You can change the phone lock code (0000) to any
four- to eight-digit personal code. The phone lock
can be set to on, automatic or off.
1. Scroll to Settings, YES, Locks, YES, Phonelock, YES,
Protection, YES.
2. Select an alternative and press YES.
3. Enter the phone lock code and press YES.
Editing the phone lock code
It is important that you remember your new code.
If you should forget it, you will need to bring your
phone in to your local Sony Ericsson retailer.
Note: The phone lock code must be entered to use
more information.
To edit your phone lock code
Scroll to Settings, YES, Locks, YES, Phonelock, YES,
Change Code, YES.
Phone lock on
If the phone lock is on, the message Phone locked.
appears each time you turn on the phone. You have
to enter your code followed by YES to use your phone.
Memory status
Check for example, how many positions are left
in your phonebook or how much memory is used.
Automatic
If the phone lock is set to automatic, you do not need
to enter your phone lock code until a different SIM
card is inserted in the phone.
To check the memory of the phonebook
Scroll to Phonebook, YES, SMS Memory, YES.
Security
55
This is the Internet version of the user's guide. © Print only for private use.
To check the memory for themes, pictures,
sounds, games
Troubleshooting
Scroll to Fun & Games, YES, select one of the
Why doesn’t the phone work the way I want?
menus, YES,
, select Memory Status, YES.
This chapter lists some problems that you might
encounter while using your phone. Some problems
require that you call your service provider, but most
of the problems you can easily correct yourself.
To check memory for text messages
Scroll to Messages, YES, SMS Memory, YES.
Memory full
Free memory by deleting unused files or information.
The phone cannot be switched on
To delete saved files or information
Some factory default files and information cannot
be deleted.
Hand-held phone
Recharge or replace the battery. See “SIM card and
•
•
Select a file or information, press
Select a submenu option or advanced option
to delete.
, YES.
No indication of charging
When you start charging a battery that is empty or a
battery that has not been used for a long time, it may
take up to 30 minutes before the battery icon appears
in the display.
56
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
Menu language
Insert correct SIM card.
If the display shows a language that you do not
understand, you can always set the following from
standby:
The phone is set to work only with certain SIM
cards. Insert the correct SIM card.
Inactive SIM
The SIM card is not activated. Contact your network
operator for more information.
•
•
Press
Press
0000
8888
for English menus.
for automatic, local menus.
Grey menu options
Emergen. Calls Only
Grey text indicates a function that is
temporarily unavailable, for example,
due to your subscription or due to a certain
setting which has not been turned on.
Since you cannot send pictures and sounds that
are copyright-protected, the Send menu is sometimes
unavailable.
You are within range of a network, but you are
not allowed to use it. However, in an emergency,
some operators allow you to call, for example,
the international emergency number 112.
No network.
There is no network within range or the received
signal is too weak. You have to move to get a signal
that is strong enough.
Error messages
Insert SIM.
There is no SIM card in the phone, it may need
cleaning or you may have inserted it incorrectly.
Wrong PIN./Wrong PIN2.
You have entered your PIN or PIN2 incorrectly.
Enter the correct PIN or PIN2, and press YES.
Troubleshooting
57
This is the Internet version of the user's guide. © Print only for private use.
Codes do not match.
Number not permitted.
When you want to change a security code
(for example your PIN) you have to confirm the
new code by entering it again. The two codes that
you have entered do not match. See “SIM card lock”
The Fixed Dialing function is on and the number
you have dialed is not on your fixed numbers list.
PIN blocked./PIN2 blocked.
You have entered your PIN or PIN2 incorrectly three
times in a row. To unblock, see “SIM card lock”
PUK blocked. Contact operator.
You entered your personal unblocking key code (PUK)
incorrectly 10 times in a row. Contact your network
operator or service provider.
Phone locked.
The phone is locked. To unlock the phone,
Phone lock code:
Your phone comes with the phone lock code, 0000.
You can change it to any four- to eight-digit code.
58
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
To change the front cover
1. Gently pull the front cover away, starting from
the top of the phone.
2. Slide the front cover and lift it off the phone.
3. Insert the notches of the new front cover into the
corresponding slots on the phone. Slide and push
the front cover up until it locks into place.
Additional information
Safe and efficient use, warranty, declaration
of conformity
Exchangeable front covers
You can replace the front cover.
Sony Ericsson Consumer web site
where help and tips are only a few clicks away. Here
you find the latest software updates, tips on how to
use your product more efficiently, function guides
for some of the products and additional help when
you require it.
Additional information
This is the Internet version of the user's guide. © Print only for private use.
59
•
Do not attempt to disassemble
your product. Only Sony Ericsson
authorised personnel should perform
service.
Guidelines for Safe and Efficient Use
Please read this information before using
your mobile phone.
ANTENNA
RECOMMENDATIONS
Only use an antenna that has been specifically
designed by Sony Ericsson for your mobile phone.
Use of unauthorised or modified antennas could
damage your mobile phone and may violate
regulations, causing loss of performance and SAR
levels above the recommended limits (see below).
•
Always treat your product with care
and keep it in a clean and dust-free
place
•
•
Do not expose your product to liquid or
moisture or humidity.
Do not expose your product to extreme
high or low temperatures.
EFFICIENT USE
•
•
Do not expose your product to open
flames or lit tobacco products.
Do not drop, throw or try to bend your
product.
Hold your mobile phone as you would any other phone.
Do not cover the top of the phone when in use, as this
affects call quality and may cause the phone to operate
at a higher power level than needed, thus shortening
talk and standby times.
•
•
Do not paint your product.
Do not use your product near medical
equipment without requesting permission.
Do not use your product when in, or around aircraft,
or areas posted “turn off two-way radio”.
Do not use your product in an area
where a potentially explosive
RADIO FREQUENCY (RF) EXPOSURE
AND SAR
Your mobile phone is a low-power radio transmitter
and receiver. When it is turned on, it emits low levels
of radio frequency energy (also known as radio waves
or radio frequency fields).
Governments around the world have adopted
comprehensive international safety guidelines,
developed by scientific organizations, e.g. ICNIRP
•
•
atmosphere exists.
•
Do not place your product or install
wireless equipment in the area above
your car’s air bag.
60
Additional information
This is the Internet version of the user's guide. © Print only for private use.
(International Commission on Non-Ionizing Radiation
Protection) and IEEE (The Institute of Electrical and
Electronics Engineers Inc.), through periodic and
thorough evaluation of scientific studies. These
guidelines establish permitted levels of radio wave
exposure for the general population. The levels include
a safety margin designed to assure the safety of all
persons, regardless of age and health, and to account
for any variations in measurements.
Specific Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency
energy absorbed by the body when using a mobile
phone. The SAR value is determined at the highest
certified power level in laboratory conditions, but the
actual SAR level of the mobile phone while operating
can be well below this value. This is because the
mobile phone is designed to use the minimum power
required to reach the network.
(that is, at the ear and worn on the body) as required
by the FCC for each model. For body worn operation,
this phone has been tested and meets FCC RF
exposure guidelines when the handset is positioned
a minimum of 15 mm from the body without any metal
parts in the vicinity of the phone or when used with the
original Sony Ericsson body worn accessory intended
for this phone. Use of other accessories may not
ensure compliance with FCC RF exposure guidelines.
A separate leaflet with SAR information for this
mobile phone model is included with the material that
comes with this mobile phone. This information can
also be found, together with more information on
radio frequency exposure and SAR, on:
DRIVING
Please check if local laws and regulations restrict
the use of mobile phones while driving or require
drivers to use handsfree solutions. We recommend
that you use only Ericsson or Sony Ericsson handsfree
solutions intended for use with your product. Please
note that because of possible interference to electronic
equipment, some vehicle manufacturers forbid
the use of mobile phones in their vehicles unless
a handsfree kit with an external antenna supports
the installation.
Variations in SAR below the radio frequency exposure
guidelines do not mean that there are variations in
safety. While there may be differences in SAR levels
among mobile phones, all Sony Ericsson mobile phone
models are designed to meet radio frequency exposure
guidelines.
Before a phone model is available for sale to
the public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
Additional information
This is the Internet version of the user's guide. © Print only for private use.
61
Always give full attention to driving and pull off the road
and park before making or answering a call if driving
conditions so require.
DISPOSING OF THE PRODUCT
Your mobile phone should not be placed
in municipal waste. Please check local
regulations for disposal of electronic
products.
PERSONAL MEDICAL DEVICES
Mobile phones may affect the operation of cardiac
pacemakers and other implanted equipment. Please
avoid placing the mobile phone over the pacemaker,
e.g. in your breast pocket. When using the mobile
phone, place it at the ear opposite the pacemaker.
If a minimum distance of 15 cm (6 inches) is kept
between the mobile phone and the pacemaker,
the risk of interference is limited. If you have any
reason to suspect that interference is taking place,
immediately turn off your mobile phone. Contact
your cardiologist for more information.
POWER SUPPLY
Connect the AC power adapter only to designated
power sources as marked on the product. Make sure
the cord is positioned so that it will not be subjected
to damage or stress. To reduce risk of electric shock,
unplug the unit from any power source before attempting
to clean it. The AC power adapter must not be used
outdoors or in damp areas. Never alter the cord or
plug. If the plug will not fit into the outlet, have a proper
outlet installed by a qualified electrician.
For other medical devices, please consult
the manufacturer of the device.
EMERGENCY CALLS
Mobile phones operate using radio signals, which
cannot guarantee connection under all conditions.
Therefore you should never rely solely upon any
mobile phone for essential communications (e.g.
medical emergencies).
Emergency calls may not be possible on all cellular
networks or when certain network services and/or
mobile phone features are in use. Check with your
local service provider.
CHILDREN
DO NOT ALLOW CHILDREN TO PLAY
WITH YOUR MOBILE PHONE OR ITS
ACCESSORIES. THEY COULD HURT
THEMSELVES OR OTHERS, OR
COULD ACCIDENTALLY DAMAGE THE MOBILE
PHONE OR ACCESSORY. YOUR MOBILE PHONE
OR ITS ACCESSORY MAY CONTAIN SMALL
PARTS THAT COULD BE DETACHED AND
CREATE A CHOKING HAZARD.
62
Additional information
This is the Internet version of the user's guide. © Print only for private use.
•
Turn off your mobile phone before removing
the battery.
Keep out of children’s reach.
Use the battery for the intended
purpose only.
Do not allow the battery to be put into
the mouth. Battery electrolytes may
be toxic if swallowed.
BATTERY USE AND CARE
We recommend that you fully charge the battery
before you use your mobile phone for the first time.
The battery should only be charged in temperatures
between +5°C (+41°F) and +45°C (+113°F).
A new battery or one that has not been used for a long
time could have reduced capacity the first few times it
is used.
•
•
•
The talk and standby times depend on the actual
transmission conditions when using the mobile phone.
If the mobile phone is used near a base station, less
power is required and talk and standby times are
prolonged.
DISPOSING OF THE BATTERY
Please check local regulations for
disposal of batteries or call your local
Sony Ericsson Customer Care Center for
information.
The battery should never be placed in municipal
waste. Use a battery disposal facility if available.
•
•
Warning! May explode if disposed of in fire.
Use only Sony Ericsson branded original batteries
and chargers intended for use with your mobile
phone. Other chargers may not charge sufficiently
or may produce excessive heat. Using other
batteries and chargers could be dangerous.
Do not expose the battery to liquid.
Do not let the metal contacts on the battery touch
another metal object. This could short-circuit and
damage the battery.
Limited Warranty
Sony Ericsson Mobile Communications AB, S-221 88
Lund, Sweden, (Sony Ericsson), provides this Limited
Warranty for your mobile phone and original accessory
delivered with your mobile phone (hereinafter referred
to as “Product”).
•
•
•
•
Do not disassemble or modify the battery.
Do not expose the battery to extreme
temperatures, never above +60°C
Should your Product need warranty service,
please return it to the dealer from whom it was
purchased, or contact your local Sony Ericsson
Customer Care Centre (national rates may apply)
information.
(+140°F). For maximum battery
capacity, use the battery in room
temperature.
Additional information
This is the Internet version of the user's guide. © Print only for private use.
63
Sony Ericsson reserves the right to refuse warranty
service if this information has been removed or
changed after the original purchase of the Product
from the dealer.
2. If Sony Ericsson repairs or replaces the Product,
the repaired or replaced Product shall be warranted for
the remaining time of the original warranty period or for
ninety (90) days from the date of repair, whichever is
longer. Repair or replacement may involve the use of
functionally equivalent reconditioned units. Replaced
parts or components will become the property of
Sony Ericsson.
3. This warranty does not cover any failure of the
Product due to normal wear and tear, or due to
misuse, including but not limited to use in other than
the normal and customary manner, in accordance
with the Sony Ericsson instructions for use and
maintenance of the Product. Nor does this warranty
cover any failure of the Product due to accident,
software or hardware modification or adjustment,
acts of God or damage resulting from liquid.
A rechargeable battery can be charged and
discharged hundreds of times. However, it will
eventually wear out – this is not a defect. When
the talk-time or standby time is noticeably shorter,
it is time to replace your battery. Sony Ericsson
recommends that you use only batteries and
chargers approved by Sony Ericsson.
Our warranty
Subject to the conditions of this Limited Warranty,
Sony Ericsson warrants this Product to be free from
defects in design, material and workmanship at the
time of its original purchase by a consumer, and for
a subsequent period of one (1) year.
What we will do
If, during the warranty period, this Product fails to
operate under normal use and service, due to defects
in design, materials or workmanship, Sony Ericsson
authorised distributors or service partners, in the
country/region* where you purchased the Product,
will, at their option, either repair or replace the Product
in accordance with the terms and conditions stipulated
herein.
Sony Ericsson and its service partners reserve
the right to charge a handling fee if a returned Product
is found not to be under warranty according to the
conditions below.
Please note that your personal settings/downloads
might be lost when the Product is repaired or replaced.
Conditions
1. The warranty is valid only if the original proof of
purchase issued to the original purchaser by an,
for this Product, Sony Ericsson authorised dealer,
specifying the date of purchase and serial number**,
is presented with the Product to be repaired or replaced.
64
Additional information
This is the Internet version of the user's guide. © Print only for private use.
4. Since the cellular system on which the Product is
to operate is provided by a carrier independent from
Sony Ericsson, Sony Ericsson will not be responsible
for the operation, availability, coverage, services or
range of that system.
Some countries/states do not allow the exclusion
or limitation of incidental or consequential damages,
or limitation of the duration of implied warranties,
so the preceding limitations or exclusions may
not apply to you.
5. This warranty does not cover Product failures caused
by installations, modifications, or repair or opening of
the Product performed by a non-Sony Ericsson
authorised person.
6. The warranty does not cover Product failures which
have been caused by use of accessories or other
peripheral devices which are not Ericsson or Sony
Ericsson branded original accessories intended for
use with the Product.
The warranty provided does not affect the consumer's
statutory rights under applicable legislation in force,
nor the consumer's rights against the dealer arising
from their sales/ purchase contract.
* European union (EU)
If you have purchased your Product in an EU country
you can have your Product serviced, under the
conditions set out above, within the warranty period
in any EU country where an identical Product is sold
by an authorised Sony Ericsson distributor. To find
out if your Product is sold in the EU country you are
in, please call the local Sony Ericsson Customer Care
Centre. Please observe that certain services may not
be possible elsewhere than in the country of original
purchase, for example due to the fact that your Product
may have an interior or exterior which is different from
equivalent models sold in other EU countries. It may
not be possible to repair SIM-locked Products.
** In some countries/regions additional information is
requested. If so, this is clearly shown on the valid proof
of purchase.
7. Tampering with any of the seals on the Product will
void the warranty.
8. THERE ARE NO EXPRESS WARRANTIES, WHETHER
WRITTEN OR ORAL, OTHER THAN THIS PRINTED
LIMITED WARRANTY. ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY.
IN NO EVENT SHALL SONY ERICSSON OR ITS
LICENSORS BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS, TO THE
FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
Additional information
This is the Internet version of the user's guide. © Print only for private use.
65
FCC Statement
Declaration of Conformity
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
S-221 88 Lund, Sweden.
declare under our sole responsibility that our product
Sony Ericsson type AAB-1021021-BV
and in combination with our accessories, to which this
declaration relates is in conformity with the appropriate
standards 3GPP TS 51.010-1, EN 301489-7, EN 60950,
following the provisions of, Radio Equipment and
Telecommunication Terminal Equipment directive
99/5/EC with requirements covering EMC directive
89/336/EEC, and Low Voltage directive 73/23/EEC.
Lund, June 2003
0682
Hiroshi Yoshioka, Head of Product Business Unit
GSM/UMTS
We fulfill the requirements of the R&TTE Directive
(99/5/EC).
66
Additional information
This is the Internet version of the user's guide. © Print only for private use.
Icon
Description
Icons
Receive items via infrared, networks, data
communications settings and accessories.
What do the icons mean?
The table below shows icons which may appear
in standby or in the menus.
Create your own menu for the functions you
use most often.
Icon
Description
Standby
Main menus
Your personal phonebook.
Tells you the strength of the GSM network
signal.
GPRS is within range, but can not be used.
GPRS is within range and can be used.
Tells you the status of the battery.
Handling of text (SMS) and voice messages.
Handling of outgoing/incoming calls, call time
and cost information.
Handling of pictures, sounds and themes.
Play games.
You cannot receive any incoming calls.
You have missed an incoming call.
Personal settings including profiles, display,
language, time and locks.
Gives you access to WAP services on the
Internet.
All incoming calls are forwarded to a defined
number.
Events, alarm clock and other extras.
No calls or only certain calls from numbers
in a list are received.
Icons
67
This is the Internet version of the user's guide. © Print only for private use.
Icon
Description
Icon
Description
Ciphering is currently not being provided
by the network.
All signals are off.
The alarm clock has been set and is on.
The timer has been set and is on.
The network is preferred and can be used.
The network is forbidden and cannot be used.
Your home network is within range and can
be used.
A profile other than Normal has been chosen.
The card lock is on or a secure WAP
connection is established.
An ongoing call.
You have received a text message.
You have received a voice message.
You have received a WAP push message.
The infrared port is on.
Phonebook
You can enter the phonebook by pressing
.
A picture is connected to a phonebook entry.
Messages
A text message is saved on the SIM card.
A voice message has not been checked.
Infrared communication is in progress.
A GPRS session is in progress.
68
Icons
This is the Internet version of the user's guide. © Print only for private use.
Icon
Description
Icon
Description
A message has not been read.
Fun & Games
A standard melody saved in My Sounds.
A message has been read.
A polyphonic melody saved in My Sounds.
A damaged message.
The message has not been sent.
The message has been sent.
Pre-defined message template (not editable).
User-defined message template.
Calls
A missed call in the call list.
An answered call in the call list.
A dialed number in the call list.
Icons
69
This is the Internet version of the user's guide. © Print only for private use.
K
PIN
Key functions
N
O
L
Locks
P
M
Memory
Q
R
Index
71
This is the Internet version of the user's guide. © Print only for private use.
S
T
W
Security
WAP
Sony Ericsson
Sounds
V
Volume
72
Index
This is the Internet version of the user's guide. © Print only for private use.
|