Samsung GH68 07472A User Manual

* Some of the descriptions in this manual may differ from your  
phone, depending on the software installed or your service  
provider.  
SAMSUNG ELECTRONICS  
Printed in Korea  
Code No.:GH68-07472A  
English. 06/2005. Rev 1.0  
World Wide Web  
Use road safety at all times  
Do not use a hand-held phone while driving. Park  
the vehicle first.  
Switch off the phone when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Important  
safety  
Switch off in an aircraft  
Wireless phones can cause interference. Using them  
in an aircraft is both illegal and dangerous.  
precautions  
Switch off the phone near all medical  
equipment  
Failure to comply with the following  
precautions may be dangerous or illegal.  
Hospitals or health care facilities may be using  
equipment that could be sensitive to external radio  
frequency energy. Follow any regulations or rules in  
force.  
 
Interference  
Keep your phone away from small children  
All wireless phones may be subject to interference,  
which could affect their performance.  
Keep the phone and all its parts, including accessories,  
out of the reach of small children.  
Be aware of special regulations  
Accessories and batteries  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is forbidden  
to use it, or when it may cause interference or danger.  
Use only Samsung-approved accessories and  
batteries. Use of any unauthorised accessories could  
damage your phone and may be dangerous.  
Water resistance  
• The phone could explode if the battery is  
replaced with an incorrect type.  
• Dispose of used batteries according to the  
manufacturer’s instructions.  
Your phone is not water-resistant. Keep it dry.  
Sensible use  
Use only in the normal position (held to the ear). Avoid  
unnecessary contact with the antenna when the phone  
is switched on.  
Qualified service  
Only qualified service personnel may repair your  
phone.  
Emergency calls  
For more detailed safety information, see "Health and  
safety information" on page 70.  
Key in the emergency number for your present  
location, then press  
.
1
About this Guide  
Tri-band operation  
Use your phone in worldwide GSM networks, in  
any of 900, 1800, and 1900 bands.  
This User’s Guide provides you with condensed  
information about how to use your phone. To quickly  
learn the basics for your phone, please refer to “Get  
started” and “Step outside the phone.”  
Special  
features of your phone  
In this guide, the following instruction icons appear:  
Indicates that you need to pay careful  
attention to the subsequent information  
regarding safety or phone features.  
7 Indian local languages  
See your own language (Hindi, Marathi, Tamil,  
Bengali, Punjabi, Kannada, and Gujarati) on  
your phone and enter the Indian text on SMS/  
MMS messages.  
Indicates that you can get more information  
on the referenced page.  
Indicates that you need to press the  
Navigation keys to scroll to the specified  
option and then select it.  
Indicates a key on the phone. For example,  
[
]
Simple, bar-typed design with Intenna  
[
]
Samsung’s powerful intenna technology allows  
the best call quality without an annoying  
external antenna.  
Indicates a soft key, whose function is  
< >  
displayed on the phone screen. For example,  
<Menu>  
2
WAP browser  
Alarm  
Access the wireless web and  
access various services and up-  
to-the-minute information.  
Use your phone as an alarm  
clock to wake you up in the  
morning or notify you to an  
event.  
Phonebook  
Calculator  
Perform basic calculations and  
do currency conversions.  
Store up to 1000 home, office,  
or cellular phone numbers for  
your contacts.  
Multimedia Message Service (MMS)  
Send and receive MMS messages with a  
combination of text, images, and sounds.  
Voice recorder  
Record memos or sounds.  
Calendar and To do list  
Keep track of your daily and  
monthly schedules and tasks.  
Java  
Enjoy Java-based embedded  
games and download new  
games.  
3
Use Phonebook ...................................................... 16  
Send messages...................................................... 17  
View messages....................................................... 18  
Contents  
Unpack  
6
6
7
Enter text  
19  
36  
40  
Make sure you have each item  
Your phone  
Neopad Indian, ABC, T9, Number, and Symbol modes  
Call functions  
Buttons, features, and locations  
Get started  
Advanced calling features  
Menu functions  
First steps to operating your phone  
All menu options listed  
Solve problems  
Install and charge the phone..................................... 7  
Power on or off........................................................ 8  
Keys and display ..................................................... 9  
Access menu functions ............................................ 11  
Customise your phone............................................. 12  
Make/answer calls .................................................. 14  
68  
70  
76  
Health and safety information  
Index  
Step outside the phone  
14  
Begin with your games, WAP, messages, and other special  
features  
Play games............................................................ 14  
Browse WAP........................................................... 16  
4
Overview of menu functions  
To access Menu mode, press <Menu> in Idle mode.  
1 SIM AT  
2
p.40  
6 Funbox  
p.54  
8 Phonebook  
p.62  
4 Sound settings  
p.45  
1 WAP browser  
2 Games  
3 Sounds  
4 Images  
5 Delete all  
6 Memory status  
p.54  
p.56  
p.57  
p.57  
p.57  
p.58  
1 Search  
p.62  
p.62  
p.63  
p.63  
p.63  
p.64  
p.64  
p.64  
1 Ring tone  
2 Ring volume  
3 Alert type  
4 Keypad tone  
5 Keypad volume  
6 Message tone  
7 Alert on call  
8 Power on/off  
9 Extra tones  
p.45  
p.45  
p.45  
p.45  
p.45  
p.45  
p.46  
p.46  
p.46  
2 New entry  
3 Group search  
4 Edit group  
5 Speed-dial list  
6 Delete all  
7 Memory status  
8 SDN*  
2 Call records  
p.40  
1 Missed calls  
2 Received calls  
3 Dialled calls  
4 Delete all  
p.41  
p.41  
p.41  
p.41  
p.41  
p.42  
7 Organiser  
p.58  
5 Call time  
6 Call costs*  
1 Alarm  
2 Calendar  
3 Time & Date  
4 Calculator  
5 To do list  
6 Voice memo  
7 Currency exchange  
p.58  
p.58  
p.59  
p.60  
p.60  
p.61  
p.61  
9 Phone settings  
p.64  
5 Messages  
p.46  
3 Network services  
p.42  
1 Display settings  
2 Greeting message  
3 Own number  
4 Language  
5 Security  
6 Extra settings  
7 Short cut  
p.64  
p.65  
p.65  
p.66  
p.66  
p.67  
p.67  
p.67  
1 Text messages  
2 Multimedia  
messages  
p.46  
p.50  
1 Call diverting  
2 Call barring  
3 Call waiting  
4 Network selection  
5 Caller ID  
6 Closed user group  
7 Band selection  
p.42  
p.43  
p.43  
p.43  
p.44  
p.44  
p.44  
3 Push messages  
p.54  
8 Reset settings  
*Shows only if supported by your  
SIM card.  
5
Unpack  
Your phone  
Make sure you have each item  
Buttons, features, and locations  
Earpiece  
Display  
Headset jack  
Phone  
Travel adapter  
User’s manual  
Navigation keys  
(Up/Down/Left/  
Right)  
WAP access/  
Confirm key  
Left soft key  
Right soft key  
Power on/off/  
Menu exit key  
Dial/Confirm  
key  
Battery  
You can obtain various accessories from your local  
Samsung dealer.  
Cancel/Correct  
key  
Alphanumeric  
keys  
Special  
function keys  
The items supplied with your phone and the accessories  
at your Samsung dealer may vary, depending on your  
country or service provider.  
Microphone  
6
         
Get started  
First steps to operating your phone  
Install the battery.  
Plug the travel  
adapter into the  
phone.  
3
4
SIM card information  
When you subscribe to a cellular network, you receive  
a plug-in SIM (Subscriber Identity Module) card  
loaded with your subscription details, such as your  
PIN, and available optional services.  
Install and charge the phone  
Remove the battery.  
Insert the SIM card.  
Plug the adapter into a standard AC wall outlet.  
1
2
5
6
When the phone is completely charged (the  
battery icon stops blinking), unplug the adapter  
from the power outlet.  
If the phone is already  
on, first turn it off by  
Make sure that the  
gold-coloured contacts  
on the card face down  
into the phone.  
holding [  
].  
7
           
Get started  
Power on or off  
Remove the adapter from the phone.  
7
Power on  
1. Press and hold [ ] to turn on  
the phone.  
Do not turn on  
the phone when  
mobile phone  
2. If necessary, enter the PIN and  
press <OK>.  
use is prohibited.  
Power off  
1. Press and hold [ ].  
Low battery indicator  
When the battery is low:  
a warning tone sounds,  
the battery low message displays, and  
the empty battery icon (  
) blinks.  
If the battery level becomes too low, the phone  
automatically turns off. Recharge your battery.  
8
     
Keys and display  
Key(s)  
Description  
Key(s)  
Description  
Deletes characters from the display.  
In Menu mode, returns to the previous menu  
level.  
Performs the function indicated on the  
bottom line of the display.  
Ends a call.  
Hold down to switch the phone on and off.  
In Menu mode, cancels input and returns the  
phone to Idle mode.  
In Idle mode, access your favourite menu  
options.  
p. 67  
In Menu mode, scroll through the menu  
options.  
Enter numbers, letters, and some special  
characters.  
In Idle mode, hold [1] down to access your  
In Idle mode, launches the Wireless  
Application Protocol (WAP) browser.  
In Menu mode, works the same functions as  
the left soft key.  
voicemail.  
Enter special characters.  
Sends or answers a call.  
In Idle mode, retrieves the last number  
dialled, missed, or received.  
In Idle mode, hold  
keypad. Hold  
deactivate Silent mode.  
[
]
down to lock the  
[
]
down to activate or  
9
   
Get started  
Display  
Layout  
Out of your service area; you  
cannot send or receive calls  
Icons  
(continued)  
The display has the three areas.  
New text message  
Icons  
displays various icons.  
New voicemail message  
New multimedia message  
Active Silent mode or call ringer set  
Text and graphics  
displays messages,  
instructions, and  
information you enter.  
to vibratep. 12, p. 45  
Mute mode is active  
p. 38  
Soft key function  
indicators  
shows the current  
functions assigned to the  
two soft keys.  
Menu Phonebook  
Alarm set  
Battery power level  
Received signal strength  
Call diverting feature is active  
p. 42  
Icons  
GPRS network  
Roaming  
Keypad Lock mode is active  
p. 13, p. 65  
Call in progress  
10  
     
Access menu functions  
Select an  
option  
1. Press the appropriate soft key.  
Use the soft  
keys  
The roles of the soft keys vary  
depending on the function you are  
using. The bottom line of the  
2. Press the Navigation keys to  
move to the next or previous  
option.  
display indicates their current role.  
3. Press <Select> to confirm the  
function displayed or option  
highlighted.  
Menu  
Phonebook  
4. To exit, choose either of the  
following methods:  
Press < > or [  
up one level.  
C] to move  
Press the left soft  
key to access  
Menu mode.  
Press the right soft  
key to access the  
Phonebook menu.  
Press [ ] to return to Idle  
mode.  
Use shortcuts Press the number key  
corresponding to the option you  
want.  
11  
 
Get started  
Customise your phone  
You can set a wallpaper for the idle  
screen.  
Idle mode  
wallpaper  
1. In Idle mode, press <Menu  
and select Phone settings  
Language  
>
Display  
language  
1. In Idle mode, press <Menu  
>
and select Phone settings  
.
Display settings  
2. Select a language.  
Wallpaper Wallpaper list  
.
2. Scroll to the image you want.  
1. In Idle mode, press <Menu  
>
Call ringer  
melody and  
volume  
3. Press <Select>.  
and select Sound settings  
Ring tone  
2. Select a ringer melody.  
3. Select Ring volume  
.
You can switch the phone to Silent  
mode to avoid disturbing other  
people with your phone sounds.  
Switch to  
Silent mode  
.
4. Adjust the volume level.  
Press and hold [ ] in Idle mode.  
5. Press <OK>.  
12  
   
You can protect the phone against  
unauthorised use with a phone  
password.  
You can lock the keypad so that  
accidental key presses does not  
affect the phone functions.  
Key lock  
Phone lock  
To lock the keypad:  
1. In Idle mode, press <Menu  
>
and select Phone settings  
1. In Idle mode, press and hold  
Security  
password  
2. Enter the default password,  
Change  
[
].  
.
2. Press <Yes>.  
To unlock the keypad:  
“00000000” and press <OK>.  
1. Press <Unlock  
>
3. Enter a new 4- to 8- digit  
2. Press [ ].  
password and press <OK>.  
4. Enter the new password again  
and press <OK>.  
5. Select Phone lock  
6. Select Enable  
7. Enter the password and press  
OK>.  
.
.
<
13  
 
Make/answer calls  
Step outside the phone  
Begin with your games, WAP, messages, and other special  
features  
1. Enter an area code and phone  
Make a call  
number.  
Play games  
2. Press [  
].  
3. To end the call, press [ ].  
1. Press <Menu> and select Fun  
box Games the game you  
want.  
2. Press [ ].  
Select a game  
1. When the phone is ringing,  
Answer a call  
press [  
].  
2. To end the call, press [ ].  
3. Select game modes or press  
any key.  
Press [Up] or [Down].  
Adjust the  
volume during  
a call  
1. Press the Navigation keys to  
move the selection.  
Play  
BubbleSmile  
2. Press [1] or [3] to make a  
horizontal or vertical line of  
three identical bubbles.  
14  
         
4. When the red bar falls down to  
the line on the scale, press [ ].  
This selects the direction.  
1. Press the Navigation keys to  
move the selection to the  
position you want to connect  
the pipe.  
Play Fun2link  
The nearer the bar to the line,  
the more exact the storke.  
2. Press [ ] to insert a pipe.  
5. Repeat until you finish the  
entire holes.  
3. Repeat until you complete the  
pipeline.  
1. Press [ ] to select a horse.  
1. Press the Navigation keys to  
check the field.  
Play  
MobileChess  
Play Ultimate  
Golf Challenge  
2. Press the Navigation keys and  
then [ ] to select the location  
you want to place the horse.  
2. Press [ ] to go to the stroke  
mode  
3. Press [ ], and press the key  
again when the red bar moves  
up to the top of the scale.  
This selects the stroke strength.  
15  
Step outside the phone  
Browse WAP  
Use Phonebook  
Using a built-in WAP (Wireless Access Protocol)  
browser, you can get easy access to the wireless web  
to receive a variety of updated services and  
To the phone’s memory:  
Add an entry  
1. In Idle mode, enter a phone  
information and to enjoy downloads of web contents.  
number and press <Save>.  
2. Select a number type.  
In Idle mode, press [ ].  
Launch the  
browser  
3. Select Phone  
.
4. Enter a name and press <OK>.  
5. Press <OK> to save the entry.  
To the SIM card:  
To scroll through browser items,  
press [Up] or [Down].  
To select an item, press [ ].  
To return to the previous page,  
Navigate  
the web  
1. In Idle mode, enter a phone  
number and press <Save>.  
press [C].  
To access browser options,  
press [ ].  
2. Select a number type.  
3. Select SIM  
.
4. Enter a name and press <OK>.  
5. Press <OK> to save the entry.  
16  
   
1. In Idle mode, press  
Phonebook> and select  
Search  
1. In Idle mode, press <Menu  
and select Messages  
Multimedia messages  
Write new  
>
Find an entry  
Send a  
multimedia  
message (MMS)  
<
.
.
2. Select an entry.  
3. Select a number.  
2. Enter the message subject  
press <OK>.  
4. Press [  
] to dial, or  
3. Select <Options> and add  
<Options> to access options.  
message contents.  
4. When you have finished, press  
Options> and select Send  
5. Select a destination type.  
6. Select one of Phone number  
E-mail address, or  
Phonebook  
Send messages  
<
.
1. In Idle mode, press <Menu  
and select Messages Text  
messages Write new  
2. Enter the message text.  
3. Press <Options> and select  
>
Send a text  
message (SMS)  
,
.
.
7. Enter a destination number or  
an e-mail address, or select  
from Phonebook and press  
Save and send or Send only  
.
4. If you selected Save and send  
,
<OK>.  
select a memory location.  
5. Enter a destination number and  
press <OK>.  
17  
 
Step outside the phone  
8. To add other destinations,  
select Add destination and  
repeat from step 6.  
When a notification appears:  
Send a  
View a  
multimedia  
message  
1. Press <View>.  
multimedia  
message(MMS)  
(continued)  
2. Press <Options> and select  
Retrieve. The message  
displays.  
9. To add destinations of other  
types, press < > and repeat  
from step 5.  
From the Inbox:  
10.When you have finished, select  
1. In Idle mode, press <Menu  
and select Messages  
Multimedia messages  
Inbox  
2. Select a message.  
>
Send message  
.
View messages  
.
When a notification appears:  
View a text  
message  
Press <View>. The message  
displays.  
From the Inbox:  
1. In Idle mode, press <Menu  
>
and select Messages  
messages Inbox  
2. Select a message.  
Text  
.
18  
 
Changing the text input mode  
The text input mode indicator displays when the  
cursor is in a text field.  
Enter text  
Neopad Indian, ABC, T9, Number, and Symbol modes  
You can enter text for some features such as  
messaging, Phonebook, or Organiser, using Neopad  
Indian mode, ABC mode, T9 mode, Number mode,  
and Symbol mode.  
Press the right soft key to change another text input  
mode until the text input mode indicator you want  
displays. To change the text input language, press the  
<Options> and select Language  
.
Your phone allows you to enter Indian (Hindi, Tamil,  
Marathi, and Bengali) words with virtual keypad which  
gives the user option to select one of five letters  
assigned on keys easily and user friendly features like  
built-in dictionary stored over 13,000 each of Indian  
languages for everyday use. You can also select  
Punjabi / Kannada / Gujarati mode as the display  
Example: Writing a text message  
language by selecting Language (Menu 9.4).  
19  
       
Enter text  
Using Neopad Hindi mode  
Example: Entering a message in New message box  
When you enter a character, you will see the  
predicted word on the Word Prediction Box at the  
bottom of display. Otherwise, repeat above steps  
to enter other characters.  
List of the characters available in Hindi  
Charachters in the Order Displayed  
Key  
Press the key  
And press [  
]
1
2
3
4
To type a character in the Neopad Hindi mode:  
1. Press a corresponding key to access the Virtual  
Keypad that contains a character you want. The  
character will appear in the Virtual Keypad at the  
bottom of display.  
2. Press the corresponding key 1 to 5 to input a  
character, or press [ ] to toggle a virtual keypad  
page to Virama.  
20  
Key 1~7: Consonants Groups  
Key 8: Independent Vowels Group  
Key 9: Dependent Vowels Group  
Key 0: Signs & Symbols  
5
6
Example: To enter  
press the 1, (Virama), 1, 5, and 5 keys.  
Example: To enter (Writing order:  
(made up of half character),  
+
+
7
), press the 1, 1, 9, 2, 8, (toggles the  
page), and 2 keys.  
8
9
0
Virama (toggles a Virtual Keypad page)  
21  
4. Press [ ] to select it and go on to input the next  
word.  
List of the combination of half and full formed  
consonant  
Example: To enter  
(Writing order:  
) using the linguistic  
+
+
+
+
dictionary,input  
2, 0, and 2 keys. You will see the desired  
word in Word Prediction Box. Select the  
word by pressing [ ].  
Example: To enter (Writing order:  
), press the 5, (Virama), 1,  
first by press the 1, 2, 9,  
+
+
+
+
+
6, and 2 keys for “ .Then, you will see  
in Word Prediction Box. Select the word  
by pressing [ ].  
Example: To enter  
(Writing order:  
+ space +  
) using the linguistic dictionary, first  
press the 5, 3, 7, and 3 keys and then you  
will see in Word Prediction Box. Select  
the word by pressing [ ]. Insert a space by  
pressing . Press the 8, 1, 2, (Virama),  
+
+
To type a word using the linguistic dictionary (Forward  
Prediction):  
+
+
+
+
+
1. Input the first character of the word you want to  
enter.  
2. You will see the word starting with the first  
character you input at step 1 in the Word  
Prediction Box at the bottom of display.  
[
]
and 1 keys and then you will see  
Word Prediction Box. Select the word by  
pressing [ ].  
in  
3. If that word is correct, go to step 4. Otherwise,  
press [Up] or [Down] to display another words you  
want to enter on the Word Prediction Box.  
22  
To type a character in the Neopad Marathi mode:  
UDB (User defined word Database for Hindi)  
1. Press a corresponding key to access the Virtual  
Keypad that contains a character you want. The  
character will appear in the Virtual Keypad at the  
bottom of display.  
2. Press the corresponding key 1 to 5 to input a  
character, or press [ ] to toggle a virtual keypad  
page to Virama.  
Every word you typed in Messages will be  
automatically stored in Hindi UDB. About 200 words  
can be stored in Hindi UDB. Every word in the UDB get  
arranged and updated by frequency of use and new  
words. To store a word in Hindi UDB, type a word and  
insert a space by pressing  
[
]. Then the word gets  
stored in Hindi UDB. After this, you will see this word  
in Word Prediction Box.  
When you enter a character, you will see the  
predicted word on the Word Prediction Box at the  
bottom of display. Otherwise, repeat above steps  
to enter other characters.  
Using Neopad Marathi mode  
Example: Entering a message in New message box  
23  
Enter text  
List of the characters available in Marathi  
7
8
Charachters in the Order Displayed  
Key  
Press the key  
And press [  
]
1
2
3
4
5
9
0
Virama (toggles a Virtual Keypad page)  
6
24  
Key 1~7: Consonants Groups  
Key 8: Independent Vowels Group  
Key 9: Dependent Vowels Group  
Key 0: Signs & Symbols  
To type a word using the linguistic dictionary (Forward  
Prediction):  
1. Input the first character of the word you want to  
enter.  
2. You will see the word starting with the first  
character you input at step 1 in the Word  
Prediction Box at the bottom of display.  
Example: To enter  
(Writing order:  
), press the 8, 2, 4, 3, 9,  
+
+
+
+
+
3, 0, 2, 2, 1, 9, and 3 keys.  
3. If that word is correct, go to step 4. Otherwise,  
press [Up] or [Down] to display another words you  
want to enter on the Word Prediction Box.  
List of the combination of half and full formed  
consonant  
4. Press [ ] to select it and go on to input the next  
word.  
Example: To enter  
(Writing order:  
) using the linguistic  
+
+
+
+
+
dictionary, first press the 1, 1, 6, (toggles  
the page), , 2, 6, 4, 9, and 2 keys. Then,  
you will see the desired word  
in  
Word Prediction Box. Select the word by  
pressing [ ].  
Example: To enter  
(Writing order:  
+
+
+
+
+
+
+
+
+
)
using the linguistic dictionary, press the 1,  
(Virama), 1, 6, 2, 5, 5, 9, 1, 0, 2, 1, and 1  
25  
keys. Then, you will see the desired word  
in Word Prediction Box. Select the  
word by pressing [ ].  
Using Neopad Tamil mode  
Example: Entering a message in New message box  
Example: To enter  
(Writing order:  
+
+
+
+
+
+
+
+
) using  
the linguistic dictionary, press the 6, 2, 9, 1,  
7, (Virama), 1, 3, (Virama), 1, 6, and 2  
keys. Then, you will see the desired word  
in Word Prediction Box. Select the  
word by pressing [ ].  
UDB (User defined word Database for Marathi)  
Every word you typed in Messages will be  
automatically stored in Marathi UDB. About 200 words  
can be stored in Marathi UDB. Every word in the UDB  
get arranged and updated by frequency of use and  
new words. To store a word in Marathi UDB, type a  
To type a character in the Neopad Tamil mode:  
1. Press a corresponding key to access the Virtual  
Keypad that contains a character you want. The  
character will appear in the Virtual Keypad at the  
bottom of display.  
word and insert a space by pressing  
[
]. Then the  
word gets stored in Marathi UDB. After this, you will  
see this word in Word Prediction Box.  
2. Press the corresponding key 1 to 5 to input a  
character, or press [ ] to toggle a virtual keypad  
page to Virama.  
26  
When you enter a character, you will see the  
predicted word on the Word Prediction Box at the  
bottom of display. Otherwise, repeat above steps  
to enter other characters.  
6
7
8
9
0
List of the characters available in Tamil  
Charachters in the Order Displayed  
Key  
Press the key  
And press [  
]
1
2
3
4
5
Virama (toggles a Virtual Keypad page)  
Key 1~4: Consonants Groups  
Key 5: Grantha characters  
Key 6~7: Independent Vowels Group & Ayudam  
Key 8~9: Dependent Vowels Group  
27  
Enter text  
Example: To enter  
(Writing order:  
), press the 2, 3, 4, (Virama),  
3, 4, 2, 8,and 2 keys.  
Example: To enter  
+
+
+
+
(Writing order:  
+
+
+
+
+
+
), press the  
6, 3, 4,3, 8, 2, 2, 5, 9, 2, 3, (Virama), and 3  
keys.  
List of the combination  
To type a word using the linguistic dictionary (Forward  
Prediction):  
1. Input the first character of the word you want to  
enter.  
2. You will see the word starting with the first  
character you input at step 1 in the Word  
Prediction Box at the bottom of display.  
3. If that word is correct, go to step 4. Otherwise,  
press [Up] or [Down] to display another words you  
want to enter on the Word Prediction Box.  
28  
4. Press [ ] to select it and go on to input the next  
word.  
UDB (User defined word Database for Tamil)  
Every word you typed in Messages will be  
Example: To enter  
(Writing order:  
+
automatically stored in Tamil UDB. About 200 words  
can be stored in Tamil UDB. Every word in the UDB get  
arranged and updated by frequency of use and new  
words. To store a word in Tamil UDB,, type a word and  
insert a space by pressing [ ]. Then the word gets  
stored in Tamil UDB. After this, you will see this word  
in Word Prediction Box.  
+
+
+
+
+
) using the  
linguistic dictionary, press the 7, 2, 3, 5, 8, 4,  
2, (Virama), and 2 keys. Then, you will see  
the desired word  
Box. Select the word by pressing [ ].  
Example: To enter  
(Writing order:  
in Word Prediction  
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ space +  
+
)
Using Neopad Bengali mode  
+
+
Example: Entering a message in New message box  
using the linguistic dictionary, first press the  
2, 4, 9, and 5 keys. Then, press the Up key to  
search the desired word  
in  
Word Prediction Box. Select the word by  
pressing [ ]. Insert a space by pressing [ ].  
Press the 3, 4, 8, 1, 3, 2, 8, and 4 keys. Then,  
you will see the desired word  
Word Prediction Box. Select the word by  
pressing [ ].  
in  
29  
Enter text  
To type a character in the Neopad Bengali mode:  
2
3
4
5
6
7
1. Press a corresponding key to access the Virtual  
Keypad that contains a character you want. The  
character will appear in the Virtual Keypad at the  
bottom of display.  
2. Press the corresponding key 1 to 5 to input a  
character, or press  
key to toggle a virtual  
keypad page to Halant.  
When you enter a character, you will see the  
predicted word on the Word Prediction Box at the  
bottom of display. Otherwise, repeat above steps  
to enter other characters.  
List of the characters available in Bengali  
Charachters in the Order Displayed  
Key  
Press the key  
And press  
key  
8
1
30  
Example: To enter  
(Writing order:  
), press the 2, 1, 9, 4, 5,  
+
+
9
0
+
+
(Halant), 5, 5, 3, 4, and 5 keys.  
The usage of the Halant (Virama)  
1. It is used as the link key to type Bengali conjuncts.  
Example: To enter Bengali , You have to type the  
, and by pressing the 1, (Halant),  
1, 7, and 2 keys.  
Halant (Virama) for a link (toggles a Virtual  
Keypad page)  
,
2. It is used as the sound to express the accurate  
pronunciation of a word. When you use the Halant  
Key 1~7: Consonants Groups (Banjonborno)  
Key 8: Independent Vowels Group (Shorborno)  
Key 9: Dependent Vowels Group (Kar)  
as the sound, you can see the icon  
screen.  
on the  
Key 0: Signs, Symbols, and Halant  
sound  
for the  
Example: To enter Bengali  
the , and  
, You have to type  
,
by pressing the 1, 1, 0,  
Example: To enter  
(Writing order:  
+
+
(Halant), 1, 7, and 2 keys.  
+
), press the 7, (Halant), 4, 6, 2, 9, 1,  
0, and 1 keys.  
Example: To enter  
(Writing order:  
+
+
), press the 5,  
2 keys.  
(Halant), 1, 6, 4, 9, , and  
31  
Enter text  
List of combination  
32  
Example: To enter  
(Writing order:  
) using the linguistic dictionary,  
press the 4, 3, 9, (Halant), and 1 keys.  
+
+
To type a word using the linguistic dictionary  
(Forward Prediction):  
1. Input the first character of the word you want to  
enter.  
+
+
Then, you will see the desired word  
Word Prediction Box. Select the word by  
pressing [ ].  
in  
2. You will see the word starting with the first  
character you input at step 1 in the Word  
Prediction Box at the bottom of display.  
Example: To enter  
) using the linguistic dictionary, press  
the 7 , 1, 9 and 4 keys. Then, you will see the  
desired word in Word Prediction Box.  
(Writing order:  
+
+
+
3. If that word is correct, go to step 4. Otherwise,  
press [Up] or [Down] to display another words you  
want to enter on the Word Prediction Box.  
Select the word by pressing [ ]. Otherwise,  
you can type it by pressing the 7, 1, 9, 4, 6,  
3, 9, and 4 keys.  
4. Press [ ] to select it and go on to input the next  
word.  
Example: To enter  
(Writing order:  
) using the linguistic dictionary,  
(Halant), and 4 keys.  
Then, you will see the desired word  
+
+
UDB (User defined word Database for Bengali)  
+
Every word you typed in Messages will be  
press the 1, 2, 9,  
automatically stored in Bengali UDB. About 200 words  
can be stored in Bengali UDB. Every word in the UDB  
get arranged and updated by frequency of use and  
new words. To store a word in Bengali UDB, type a  
word and insert a space by pressing [ ]. Then the  
word gets stored in Bengali UDB. After this, you will  
see this word in Word Prediction Box.  
in  
Word Prediction Box. Select the word by  
pressing [ ].  
33  
Enter text  
Inserting a Space  
Using ABC mode  
Press the appropriate key until the character you want  
appears on the screen.  
To insert a space between words, press [ ].  
Entering a Indian number directly  
Characters in order displayed  
Key  
To enter a Hindi, Marathi, Tamil or Bengali number,  
press and hold the number key in each Indian mode.  
Upper case  
Lower case  
Scrolling  
To move the cursor to the left or right within the text,  
press [Left] or [Right].  
Clearing characters and Words  
To clear the character to the left of the cursor, press  
[
C
]key. You can clear all of the letters on the display  
by pressing and holding [ ].  
C
Returning to the Previous Screen  
space  
When the text input field is cleared, press and hold [  
C]  
key to return to the previous screen.  
Tips for using ABC mode  
To enter the same letter twice or to enter a  
different letter on the same key, wait for the cursor  
to move to the right automatically or press [Right].  
Then, enter the next letter.  
34  
 
Press [ ] to insert a space.  
2. Enter the whole word before editing or deleting  
characters.  
Press [ ] to change case. Capital lock ( ), Lower  
case ( ), and Initial capital ( ) are available.  
3. When the word displays correctly, go to step 4.  
Otherwise, press [  
choices for the keys that you have pressed.  
For example, Of and Me use [ ] and [ ].  
0] to display alternative word  
Press [Left] or [Right] to move the cursor.  
Press [  
C
] to delete characters one by one. Press  
6
3
and hold [  
C] to clear the display.  
4. Press [ ] to insert a space and enter the next  
word.  
Depending on your country, you may be able to  
access an input mode for your specific language by  
holding [ ].  
Tips for using T9 mode  
Press [1] to enter periods or apostrophes  
automatically.  
Using T9 mode  
T9 is a predictive text input mode that allows you to  
key in any character using single keystrokes.  
Press [ ] to change case in T9 mode. Capital lock  
(
), Lower case ( ), and Initial capital ( ) are  
available.  
Entering a word in T9 mode  
Press [Left] or [Right] to move the cursor.  
1. Press [  
each key once for each letter.  
For example, press [ ], [ ], [  
enter Hello in T9 mode.  
2] to [9] to start entering a word. Press  
Press [  
C] to delete characters one by one. Press  
and hold [  
C] to clear the display.  
4
3
5], [5], and [6] to  
Adding a new word to the T9 dictionary  
This feature may not be available for some languages.  
1. Enter the word that you want to add.  
T9 predicts the word that you are typing, and it  
may change with each key that you press.  
35  
Call functions  
2. Press [0] to display alternative words for your key  
Call functions  
Advanced calling features  
presses. When there are no more alternative  
words, Add displays on the bottom line.  
3. Press <Add>.  
Making a call  
1. In Idle mode, enter the area code and phone  
number.  
4. Enter the word you want using ABC mode and  
press <OK>.  
Using Number mode  
2. Press [  
].  
Number mode enables you to enter numbers.  
Press [C] to clear the last digit or press and hold  
[
C] to clear the whole display. You can move the  
Press the keys corresponding to the digits you want.  
cursor to edit an incorrect digit.  
Using Symbol mode  
Making an international call  
Symbol mode enables you to insert symbols.  
1. In Idle mode, press and hold [  
appears.  
0
]. The  
+
character  
To  
Press  
2. Enter the country code, area code, and phone  
number, then press [ ].  
display more symbols  
select a symbol  
[Up] or [Down].  
the corresponding  
number key.  
Redialling recent numbers  
1. In Idle mode, press [  
recent numbers.  
] to display the list of  
clear the symbol(s)  
insert the symbol(s)  
[
C
].  
2. Scroll to the number you want and press [  
].  
<
OK>.  
36  
       
Making a call from Phonebook  
Ending a call  
Press [ ].  
Once you have stored a number in Phonebook, you  
can dial the number by selecting it from  
Phonebook.  
p. 62  
Answering a call  
When you receive an incoming call, the phone rings  
and displays the incoming call image.  
You can also use the speed dial feature to assign your  
most frequently called numbers to specific number  
keys.  
Dialling a number from the phone’s memory  
1. In Idle mode, press and hold [ ]. A + appears.  
p. 63  
Press [  
] or <Accept> to answer the call.  
Tips for answering a call  
0
When Anykey answer in the Extra settings  
menu is active, you can press any key to answer  
2. Enter the location number for the phone number  
you want and press [ ].  
a call, except for [ ] and <Reject>.  
p. 67  
3. Press [Up] or [Down] to scroll through other  
numbers.  
Press <Reject> or [ ] to reject a call.  
4. Press <Dial> or [  
] to dial the number you  
Viewing missed calls  
want.  
Dialling a number from the SIM card  
If you have missed calls, the screen displays how  
many calls you have missed.  
1. In Idle mode, enter the location number for the  
phone number you want and press [ ].  
1. Press <View>.  
2. Press [Up] or [Down] to scroll through other  
numbers.  
2. If necessary, scroll through the missed calls.  
3. Press [  
] to dial the number you want.  
3. Press <Dial> or [  
] to dial the number you  
want.  
37  
     
Call functions  
Placing a call on hold/Retrieving  
Press <Hold> or <Unhold> to place the call on hold  
or retrieve the call.  
Using the headset  
Use the headset to make or answer calls without  
holding the phone.  
Connect the headset to the jack on the left side of the  
phone.  
Using the menu functions  
Press <Options> and select Menu  
.
The buttons on the headset work as listed below:  
Switching off the microphone  
(
Mute mode)  
To  
Press  
You can temporarily switch off your phone’s  
microphone so that the other person on the phone  
cannot hear you.  
redial the last call  
answer a call  
end a call  
the button twice.  
and hold the button.  
and hold the button.  
Press <Options> and select Mute or Unmute  
.
Muting or sending key tones  
You can turn the key tones off or on.  
Options during a call  
You can access a number of functions during a call.  
Press <Options> and select Mute keys or Send  
keys  
.
Adjusting the volume during a call  
Use [Up/Down] to adjust the earpiece volume during a  
call.  
To communicate with answering machines or  
computerised telephone systems, Send keys must  
be selected.  
Press [Up] to increase the volume level and [Down] to  
decrease the volume level.  
38  
       
1. Press [  
] to answer the call. The first call is  
Sending a sequence of DTMF tones  
Dual tone multi-frequency (DTMF) tones are the tones  
used in phones for tone dialling.  
automatically put on hold.  
2. Press <Swap> to switch between the calls.  
3. Press <Options> and select End held call to end  
You can send DTMF tones as a group after entering the  
entire number you need to send or retrieving a  
number from Phonebook. This feature is helpful for  
entering a password or an account number when you  
call an automated system, like a banking service.  
the call on hold.  
4. To end the current call, press [ ].  
Making a multi-party call  
1. When connected with a teleservice system, press  
Use this feature to allow as many as six people to join  
a multi-party call, or conference call.  
<
Options> and select Send DTMF  
2. Enter the number you need to send and press  
OK>.  
.
Your service provider must support multi-party calls  
for you to use this feature.  
<
Setting up a multi-party call  
1. Call the first participant.  
Using Phonebook  
You can access the Phonebook menu to locate or  
2. Call the second participant. The first call is  
automatically put on hold.  
store entries.p. 62  
Press <Options> and select Phonebook  
.
3. Press <Options> and select Join. The first  
participant is added to the multi-party call.  
Answering a second call  
You can answer an incoming call, if your network  
supports it and you have activated the call waiting  
4. If desired, call another person or answer an  
incoming call.  
feature.p. 43  
39  
       
Menu functions  
5. Press <Options> and select Join  
.
Menu functions  
6. Repeat steps 4 and 5 as desired.  
All menu options listed  
Having a private conversation with one  
participant  
SIM AT (Menu 1)  
1. Press <Options> and select Select one  
2. Select a name or number from the participant list.  
3. Select Private  
.
This menu is available if you use a SIM AT card that  
provides additional services, such as news, weather,  
sports, entertainment, and location services. Available  
services may vary, depending on your service  
provider’s plans.  
.
You can talk privately with that person, while the  
other participants converse with each other.  
4. To return to the multi-party call, press <Options  
>
For details, see your SIM card instructions or contact  
your service provider.  
and select Join  
.
Dropping one participant  
1. Press <Options> and select Select one  
.
Call records (Menu 2)  
Use this menu to view the calls you have dialled,  
received, or missed, the length of your calls, and the  
cost of your calls.  
2. Select a name or number from the participant list.  
3. Press [Down] and select Remove  
.
The participant is dropped from the call, but the  
call continues with the other parties.  
To access this menu, press <Menu> in Idle mode and  
select Call records  
.
4. Press [ ] to end the multi-party call.  
40  
         
Missed calls (Menu 2.1)  
Delete all (Menu 2.4)  
This menu displays the most recently received calls  
that you did not answer.  
Use this menu to delete all of the records in each call  
type.  
1. Press [ ] to check the call type(s) to be cleared.  
2. Press <Delete>.  
Accessing a call record  
1. Select a call record.  
3. Press <Yes> twice to confirm the deletion.  
2. Press [  
] to dial or <Options> to access call  
record options.  
Call time (Menu 2.5)  
Using call options  
This menu displays the time log for calls made and  
received. The actual time invoiced by your service  
provider will vary.  
When you press <Options>, the following options are  
available:  
Edit: change the number of the selected call record.  
Last call time: check the length of your last call.  
Delete: delete the selected call record.  
Total sent: check the total length of all the calls  
you have dialled.  
Received calls (Menu 2.2)  
Total received: check the total length of all the  
calls you have received.  
This menu displays the most recent calls you have  
received.  
Reset timers: reset the call timers. You need to  
enter the phone password.  
Dialled calls (Menu 2.3)  
The password is preset to 00000000. You can  
This menu displays the most recent calls you have  
dialled.  
change this password.p. 66  
41  
         
Menu functions  
Call costs (Menu 2.6)  
Network services (Menu 3)  
This network feature displays the cost of calls. This  
menu is available only if your SIM card supports this  
feature. Note that this is not intended to be used for  
billing purposes.  
Use this menu to access network services. Please  
contact your service provider to check their availability  
and subscribe to them, if you wish.  
To access this menu, press <Menu> in Idle mode and  
Last call cost: check the cost of your last call.  
select Network services  
.
Total cost: check the total cost of all of your calls.  
If the total cost exceeds the maximum cost set in  
Set max cost, you must reset the counter before  
you can make another call.  
Call diverting (Menu 3.1)  
This network service reroutes incoming calls to a  
phone number that you specify.  
Max cost: check the maximum cost limit set in  
1. Select a call diverting option:  
Set max cost  
.
Divert always: divert all calls.  
Reset counters: reset the cost counters. You  
need to enter your PIN2.  
Busy: diver calls when you are on another call.  
No reply: divert calls when you do not answer  
the phone.  
Set max cost: set the maximum cost authorised  
for your calls. You need to enter your PIN2.  
Unreachable: divert calls when you are not in  
an area covered by your service provider or  
when your phone is switched off.  
Price/Unit: set the price per unit that is applied  
when the cost of your calls is calculated. You need  
to enter your PIN2.  
Cancel all: cancel all call diverting options.  
2. Select the type of calls to be diverted.  
3. To activate call diverting, press <Activate>.  
Otherwise, press <Options> and select Remove  
.
42  
   
4. Enter the number to which calls are to be diverted  
Change barring password: change the call  
barring password obtained from your service  
provider.  
and press <OK>.  
5. If you selected No reply, select the length of time  
the network delays before diverting a call and  
press <Select>.  
2. Select the type of calls to be barred.  
3. Press <Activate>. To deactivate call barring,  
press <Deactivate>.  
Call barring (Menu 3.2)  
4. Enter the call barring password supplied by your  
This network service allows you to restrict your calls.  
1. Select a call barring option:  
service provider and press <OK>.  
Call waiting (Menu 3.3)  
All outgoing: prohibit all outgoing calls.  
International: prohibit international calls.  
International except to home: only allow  
calls to numbers within the current country  
when you are abroad, and to your home  
country, defined as where your home network  
provider is located.  
This network service informs you when someone is  
trying to reach you while you are on another call.  
1. Select the type of calls to which the call waiting  
option will apply.  
2. Press <Activate>. To deactivate call waiting,  
press <Deactivate>.  
All incoming: prohibit incoming calls.  
Incoming while abroad: prohibit incoming  
calls when you use your phone outside of your  
home country.  
Cancel all: cancel all call barring settings,  
allowing calls to be sent and received normally.  
Network selection (Menu 3.4)  
This network service allows you to either automatically  
or manually select the network used when roaming  
outside of your home area.  
43  
         
Menu functions  
You can select a network other than your home  
network only if there is a valid roaming agreement  
between the two.  
how to create a closed user group, contact your  
service provider.  
Index list: list, add, or delete CUG index  
numbers. Press <Options> to access the options  
for setting up an index list.  
Automatic: connect to the first available network  
when roaming.  
Manual: select the network you want.  
Outside access: enable calls to numbers other  
than those in the Closed user group. This feature  
depends on the nature of your CUG subscription.  
Caller ID (Menu 3.5)  
This network service allows you to prevent your phone  
number from being displayed on the phone of the  
person being called. However, some networks do not  
allow the user to change this setting.  
Default group: enable the default CUG, if you  
have set one with your service provider. When  
making a call, you are given the option of using  
your default CUG, instead of selecting one from the  
list.  
Default: use the default setting provided by the  
network.  
Deactivate: deactivate the CUG function, if the  
default group is enabled or a CUG index is  
selected.  
Hide number: ensure your number does not  
display on the other person’s phone.  
Send number: send your number each time you  
make a call.  
Band selection (Menu 3.7)  
For the phone to make and receive phone calls, it  
must register with an available network.  
Closed user group (Menu 3.6)  
Use this menu to set incoming and outgoing calls to be  
restricted to a selected user group. For details about  
Your phone can handle any of the following types of  
networks: GSM 1900 and Combined GSM 900/1800.  
44  
       
The country where you purchased your phone  
determines the default band that it uses. When you  
travel abroad, you must remember to change to an  
appropriate band.  
Alert type (Menu 4.3)  
Use this menu to specify how you are to be informed  
of incoming calls.  
Melody: the phone rings using the selected ring  
tone.  
When you select a new band, your phone  
automatically searches for all available networks. Your  
phone registers with a preferred network within the  
band.  
Vibration: the phone vibrates but not rings.  
Vibra+Melody: the phone vibrates three times  
and then starts ringing.  
Sound settings (Menu 4)  
Use this menu to customise various sound settings.  
Keypad tone (Menu 4.4)  
Use this menu to select the tone that the phone  
sounds when you press a key.  
Ring tone (Menu 4.1)  
Use this menu to select a ring tone for the call ringer.  
You can select one of the default ring melodies,  
downloaded sounds, or the melodies you have  
created.  
Keypad volume (Menu 4.5)  
Use this menu to adjust the keypad tone volume.  
Message tone (Menu 4.6)  
Ring volume (Menu 4.2)  
Use this menu to select a ring tone or alert type for  
incoming messages.  
Use this menu to adjust the ringer volume.  
SMS tone: specify how you are informed of a new  
SMS message.  
45  
             
Menu functions  
SMS-CB tone: specify how you are informed of a  
new cell broadcast (CB) message.  
Minute minder: set the phone to beep every  
minute during an outgoing call to keep you  
informed of the length of your call.  
MMS tone: specify how you are informed of a new  
MMS message.  
Connect tone: set the phone to beep when it is  
connected to the system.  
Repetation: set how open the phone reminds you  
of new messages.  
Messages (Menu 5)  
Alert on call (Menu 4.7)  
Use the Messages menu to send and receive short  
messages, and multimedia messages. You can also  
use WAP push message, Voice mail, and Cell broadcast  
message features.  
Use this menu to select whether or not the phone  
informs you when you receive a new message or when  
the time for an alarm comes during a call.  
To access this menu, press <Menu> in Idle mode and  
Power on/off (Menu 4.8)  
select Messages  
.
Use this menu to select the melody that the phone  
plays when it is switched on or off.  
Text messages (Menu 5.1)  
Short Message Service (SMS) allows you to send or  
receive text messages including pictures, audio clips,  
and animated images.  
Extra tones (Menu 4.9)  
Use this menu to customise additional tones for the  
phone.  
The maximum number of characters allowed in a  
short message varies by service provider. If your  
message exceeds the maximum number of  
characters, the phone will split the message.  
Error tone: set the phone to beep when you make  
a mistake.  
46  
               
Delete: delete the message.  
Inbox (Menu 5.1.1)  
Send: forward the message.  
You can view received text messages in this menu.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
While viewing a message, press <Options> to access  
the following options:  
Move to phone: move the message from the SIM  
card to the phone’s memory.  
Delete: delete the message.  
Send: forward the message.  
Text reply: reply to the sender.  
Call back: call the sender.  
Move to SIM: move the message from the  
phone’s memory to the SIM card.  
Select objects: save images or sounds from the  
message into your phone.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Write new (Menu 5.1.3)  
Move to phone: move the message from the SIM  
card to the phone’s memory.  
You can create and send a text message.  
1. Enter your message.  
Move to SIM: move the message from the  
phone’s memory to the SIM card.  
You can enter up to 918 standard characters, or  
approximately 402 Unicode characters, such as ‘â.  
Select objects: save images or sounds from the  
message into your phone.  
2. Press <Options> to access the following options:  
Text formatting: change the text attributes.  
Add objects: add a sound, melody, picture, or  
animated image to the message.  
Add templates: retrieve a text template.  
Add emoticon: retrieve an emoticon.  
Outbox (Menu 5.1.2)  
You can view sent or saved text messages.  
While viewing a message, press <Options> to access  
the following options:  
47  
         
Menu functions  
Add phonebook: add a Phonebook entry.  
Your phone provides preset emoticons so that you can  
use when writing a message. Use this menu to create  
or edit emoticons.  
Add bookmark: add a web page’s address.  
Language: change the language used in T9  
input mode.  
While viewing the emoticon list, press <Options> to  
access the following options:  
3. Press <Options> and select Send only  
,
Save  
and send or Save only  
.
Add: add a new emoticon.  
4. If you select Save and send or Save only, select  
Edit: edit the selected emoticon.  
Send: send a message using the emoticon.  
Delete: delete the emoticon.  
a memory location.  
5. Enter a destination number.  
6. Press <OK> to send the message.  
Settings (Menu 5.1.6)  
Templates (Menu 5.1.4)  
Use this menu to customise the SMS settings.  
You can preset maximum 5 templates to write a text  
message.  
The setting options available in this menu may vary  
depending on your service provider.  
While viewing the templates list, press <Options> to  
access the following options:  
Setting x (where  
x
is the setting group number):  
each group has its own submenu.  
Edit: edit the template.  
Service centre: store or changes the number of  
your message centre.  
Send message: send the template as an SMS  
message.  
Default destination: store a default destination  
number.  
Delete: delete the template.  
Emoticon template (Menu 5.1.5)  
Default type: set the default message type.  
48  
 
Default validity: set the length of time your  
messages are stored in the message centre while  
the network attempts to deliver them.  
Memory status (Menu 5.1.8)  
Use this menu to check the number of SMS messages  
you have stored and total number of SMS messages  
you can store in each message box.  
Setting name: change the name of the setting  
group.  
Voice mail (Menu 5.1.9)  
Common settings: The following options are  
available.  
Use this menu to store the number of the voice mail  
server and access your voice mails.  
Reply path: allow the recipient to reply to you  
through your message centre.  
You must enter the voice server number before you  
can access your voice mails. Your service provider  
can give the voice server number.  
Delivery reports: set the network to inform you  
when your message has been delivered.  
Bearer selection: select the GSM or GPRS  
preferred bearer type.  
Connect to voice server: connect to the voice  
server to allow you to listen to your messages. You  
can also connect to the voice mail server by  
Delete all (Menu 5.1.7)  
pressing and holding [1] in Idle mode.  
Use this menu to delete all of SMS messages in each  
message box.  
Voice server number: change the voice mail  
server name or number.  
1. Press [ ] to check the message box(es) to be  
cleared.  
Broadcast (Menu 5.1.0)  
The Cell Broadcast service delivers short messages on  
various topics such as the weather or traffic.  
2. Press <Delete>.  
3. Press <Yes> twice to confirm the deletion.  
49  
     
Menu functions  
Use this menu to change the settings for the service  
and access broadcast messages.  
Inbox (Menu 5.2.1)  
This menu displays MMS messages that you have  
received. The following icons tell you the message  
status:  
Read: open received messages.  
The Volatile box saves network messages until  
the phone is switched off.  
notification that you have read  
notification that you have not read  
you are retrieving from the server  
the server is processing your request  
the server is failed to send  
you have read  
The Archive box saves network messages  
indefinitely. Press <Options> and select Save  
when a text notification appears. The message is  
saved in the Archive box.  
Receive: enable or disable the reception of  
broadcast messages.  
you have not read  
Channel list: specify the channels from which you  
receive broadcast messages.  
While viewing a message, press <Options> to access  
the following message options:  
Language: select the language in which broadcast  
messages display.  
Delete: delete the message.  
Reply: reply to the sender.  
Callback: call the sender.  
Please contact your service provider for details.  
Multimedia messages (Menu 5.2)  
Cut address: extract URLs, e-mail addresses, or  
Multimedia Message Service (MMS) delivers messages  
containing a combination of text, picture, and sound,  
from phone to phone or from phone to e-mail.  
phone numbers from the message.  
Forward: forward the message to another person.  
50  
     
Save picture: save an image from the message  
into the Images folder.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
Save sound: save a sound from the message into  
the Sounds folder.  
Send: send or resend the message.  
Edit message: edit the message.  
Properties: view the message properties.  
Properties: view the message properties.  
When you select a notification, you can access  
Retrieve to retrieve the message from the MMS  
server.  
Draft (Menu 5.2.3)  
After creating a multimedia message, you can store it  
in this message box for sending later.  
Outbox (Menu 5.2.2)  
You can view a message and use the options the same  
as in Outbox  
.
This menu displays MMS messages that you have  
sent. The following icons tell you the message status:  
Write new (Menu 5.2.4)  
currently being sent  
sent  
You can create and send an MMS message.  
1. Enter a message subject and press <OK>.  
your phone couldn’t send  
to be sent  
2. Press <Options> and add message contents using  
one of the following options:  
deferred  
Add text: add message text.  
While viewing a message, press <Options> to access  
the following options:  
Add picture: add a picture to the message.  
Add sound: add a sound clip to the message.  
Send: send the message.  
Delete: delete the message.  
51  
       
Menu functions  
Save: save the message in the Draft or  
Templates box.  
6. Select one of Phone number  
,
E-mail address, or  
Phonebook  
.
Settings: change the message settings.  
Add destination: enter destination numbers  
or addresses.  
7. Enter a destination number or an e-mail address,  
or select an entry from Phonebook and press  
<OK>.  
Preview: view the message you created.  
8. To add more destinations, select Add destination  
and repeat from step 6.  
3. If you want to change the added items, highlight  
one and press <Options> to access the following  
options:  
9. To enter additional numbers or addresses to other  
destination types, press < >and repeat from step  
5.  
Edit text/picture/sound: edit the text,  
picture, or sound.  
10.When you have finished, select Send message  
.
Add page: add pages. Move to each page by  
pressing [Left] or [Right] on the message  
screen.  
Delete: delete the item from your message.  
Duration: set how long one page displays.  
After the specified time, the display  
automatically scrolls to the next page.  
Templates (Menu 5.2.5)  
This menu stores messages you saved as templates so  
that you can use them to create new messages.  
While viewing a message template, press <Options  
to access the following options:  
>
Edit message: send the message using the  
template.  
4. When you have finished, select Send from the  
options.  
Delete: delete the template.  
5. Select a destination type (To, Cc, Bcc).  
52  
Message acceptance: select the category of  
messages you want to receive.  
Delete all (Menu 5.2.6)  
Use this menu to delete all of the messages in each  
message box.  
Hide ID: hide your phone number on the  
recipient’s phone.  
1. Press [ ] to check the message box(es) to be  
cleared.  
Expiry date: set the length of time your messages  
are stored in the message centre.  
2. Press <Delete>.  
Delivery time: set the time delay before  
messages are sent.  
3. Press <Yes> twice to confirm the deletion.  
Memory status (Menu 5.2.7)  
Priority: set the priority level of your messages.  
Use this menu to view the amount of memory  
available for MMS messages and memory currently in  
use in each message box.  
Report allowed: send a delivery report from the  
network to the sender.  
Page duration: set how long one page in your  
outgoing messages displays. After a specified time,  
the display automatically scrolls to the next page.  
Setup (Menu 5.2.8)  
You can customise the settings for sending and  
receiving MMS messages.  
MMS profile (Menu 5.2.9)  
Delivery report: set the network to inform you  
when your message has been delivered.  
You can configure required network settings for MMS.  
The last profile accessed is automatically activated for  
sending or receiving subsequent messages.  
Read reply: request a reply from the recipient.  
Auto download: set whether or not your phone  
retrieves new incoming messages from the MMS  
server without notifications.  
Check with your service provider before you change  
any MMS settings on your phone.  
Profile name: assign a name to the MMS profile.  
53  
     
Menu functions  
Connection URL: enter the address of your MMS  
server.  
Funbox (Menu 6)  
The Funbox menu allows you to use the WAP browser,  
play Java games, and access images and sounds  
stored in the phone’s memory.  
Security: select a data transmission mode.  
IP address: enter the gateway address.  
User name: assign the user ID.  
To access this menu, press <Menu> in Idle mode and  
Password: enter the password.  
select Funbox  
.
APN: enter the access point name used for the  
address of the MMS server.  
WAP browser (Menu 6.1)  
The Wireless Application Protocol (WAP) browser on  
your phone allows you to access the wireless web.  
Using the WAP browser, you can access updated  
information and a wide variety of media content, such  
as wallpapers and ring tones.  
Push messages (Menu 5.3)  
Use this menu to access messages from the WAP  
server.  
Inbox: view push messages you have received.  
Home (Menu 6.1.1)  
Receive: determine whether or not your phone  
receives push messages.  
Use this menu to connect your phone to the network  
and load the homepage of the wireless web service  
provider. You can also press [ ] in Idle mode.  
Never: the phone rejects push messages.  
Always: the phone receives all push messages.  
Delete all: delete all of push messages.  
54  
     
Navigating with the WAP browser  
Exiting the WAP browser  
Press [ ] to exit the browser.  
To  
Press  
Favorite (Menu 6.1.2)  
scroll through browser items  
select a browser item  
return to the previous page  
[Up] or [Down].  
[ ].  
Use this menu to save URL addresses to quickly access  
a website.  
[C].  
Adding a favorite  
1. Select an empty location.  
Selecting and using browser menu options  
2. Enter a URL address and press <Enter>.  
3. Enter a name for the favorite and press <Enter>.  
From any web page, press and hold [ ] to access the  
following browser options:  
Using favorite options  
Reload: reload the current page.  
After saving an item, press <Options> to access the  
following options:  
Home: go back to the homepage.  
Go to URL: enter a URL address manually.  
Go to URL: access the website.  
Show URL: view the URL address of the current  
web page.  
Edit: edit the address and name of the favorite.  
Delete: delete the favorite.  
Edit home: change the page to be used for your  
homepage.  
http:// (Menu 6.1.3)  
Clear cache: delete information stored in the  
cache.  
Use this menu to manually enter the URL address of a  
website and access the website.  
Inbox: read messages received from a web  
server.  
55  
 
Menu functions  
Dial-up number: enter the PPP server phone  
number.  
Settings (Menu 6.1.4)  
Use this menu to set up servers for the WAP browser.  
Contact your service provider for details about your  
settings options.  
Data call type: select a data call type.  
Clear cache (Menu 6.1.5)  
For each server, the following options are available:  
Use this menu to clear the cache, which is the  
temporary memory that stores the web pages you  
have recently accessed.  
Profile name: assign a name to the server profile.  
Homepage URL: set the address of your  
homepage.  
Games (Menu 6.2)  
Security: select a data transmission mode.  
You can download MIDlets (Java applications that run  
on mobile phones) from various sources using the  
WAP browser, and store them in your phone.  
Bearer: select a bearer for each type of network  
address accessed; GPRS or Data  
.
When the bearer is set to GPRS  
:
Java services may not available, depending on your  
service provider.  
IP address: enter the WAP gateway address.  
User name: enter the user ID.  
Launching a game  
1. Select the game you want on the Games list.  
Password: enter the password.  
APN: enter the access point name of the GPRS  
network gateway.  
2. On the startup screen of the game, you can access  
the following options:  
When the bearer is set to Data  
:
START GAME: start a new game.  
CONTINUE: continue the last game you  
played.  
IP address: enter the WAP gateway address.  
Login name: enter the User ID.  
Password: enter the password.  
56  
   
HIGH SCORE: view the high score table. This  
option may not be available for some games.  
HOW TO PLAY: view how to play the game  
and the key functions for the game.  
Rename: change the name of the sound.  
Delete: delete the sound.  
Set as ringtone: set the sound as your ring tone.  
OPTION: switch on or off the game sound.  
Images (Menu 6.4)  
3. Press [ ] to confirm your selection.  
This menu displays images downloaded from the  
wireless web or received in messages.  
Viewing game information  
Scroll to the game you want and press <Info>.  
While accessing an image, press <Options> to access  
the following options:  
Changing DNS settings  
Rename: change the name of the image.  
You may need to change the DNS setting of the Java  
server at your service provider’s instructions.  
Delete: delete the image.  
Set as wallpaper: set the image as your  
wallpaper for the idle screen.  
1. Select Setting on the Games list.  
2. Enter the primary address and press <OK>.  
3. Enter the secondary address and press <OK>.  
Delete all (Menu 6.5)  
You can delete all of the downloaded items in the  
Sounds (Menu 6.3)  
Games Sounds, and Images folders.  
,
This menu displays sounds downloaded from the  
wireless web or received in messages.  
1. Press [ ] to check the folder(s) to be cleared.  
2. Press <Delete>.  
While accessing a sound, press <Options> to access  
the following options:  
3. Press <Yes> twice to confirm the deletion.  
57  
   
Menu functions  
3. Select AM or PM in 12-hour time format.  
Memory status (Menu 6.6)  
Your phone is preset to a 24-hour format. You  
You can check the total amount of memory for media  
items and the amount of memory currently in use in  
each media box.  
can change the time format.p. 59  
4. If you selected Morning call in step 1, choose  
Monday to friday or Monday to saturday  
.
Organiser (Menu 7)  
Stopping an alarm  
The Organiser feature enables you to keep track of  
your schedule and tasks, and to make a voice memo.  
You can also set the time and date and use convenient  
features, such as alarms, calculator, and currency  
converter.  
When the alarm sounds, press any key.  
To remove an alarm set, access it, press  
<Options> and select Remove alarm.  
To remove all alarm sets, select Remove alarm  
from the Alarm menu.  
To access this menu, press <Menu> in Idle mode and  
Setting the alarm to ring even if the phone is  
off  
select Organiser  
.
Alarm (Menu 7.1)  
From the Alarm screen, select Autopower  
Enable.  
Use this menu to set alarms to ring at a specific time.  
If the phone is off when it is time for the alarm to ring,  
the phone switches on and sounds the alarm.  
Setting an alarm  
1. Select the type of alarm.  
2. Enter the time for the alarm to sound.  
Calendar (Menu 7.2)  
Use this menu to consult the calendar, write memos,  
or set alarms to act as a reminder.  
58  
       
Search all: view all of the memos you created.  
Delete all: delete all memos.  
Writing a memo  
1. Select a date on the calendar.  
2. Enter your memo and press <OK>.  
Go to date: go to a specific date.  
Exit: exit the Calendar menu.  
3. Press [ ] to set an alarm to ring on the chosen  
day.  
While viewing a memo, press <Options> to access  
the following options:  
Otherwise, press <Skip>.  
4. Enter the time for the alarm.  
New: add a new memo.  
To select an alarm melody, press <Melody>.  
5. Select AM or PM in 12-hour format.  
Your phone is set to a 24-hour format. You can  
Edit: edit the memo.  
Alarm: set an alarm for the memo.  
Delete: delete the memo.  
change the format.  
p. 60  
Copy to: copy the memo to another date.  
Move to: change the date of the memo.  
The colour of the date on the calendar changes to  
red to indicate that a memo exists for that date.  
Time & Date (Menu 7.3)  
Viewing a memo  
1. Select a date which has memos from the calendar.  
Use this menu to change the time and date displayed  
on your phone. Before setting the time and date,  
specify your time zone in World time  
2. Press [Left] or [Right] to view other memos  
scheduled for that day.  
.
Set time: enter the current time.  
Using calendar memo options  
Set date: enter the current date.  
On the calendar screen, press <Options> to access  
the following options:  
World time: set your local time zone and find out  
what time it is in another part of the world.  
59  
   
Menu functions  
Time format: select 12-hour or 24-hour time  
format.  
3. Select a priority level.  
4. Enter your deadline and press [ ].  
Viewing the To do list  
Calculator (Menu 7.4)  
When you select the To do list menu, the tasks display  
with a check mark, if the task has been done, and a  
Use this menu to perform basic arithmetic functions  
such as addition, subtraction, multiplication, and  
division.  
priority level indicator;  
and for Low.  
To change the status of a specific task, press [  
for High,  
for Normal,  
1. Enter the first number.  
].  
Press <.()> to insert a decimal point or a bracket.  
Press  
[
] or [ ] to move the cursor.  
While viewing a task or the task list, press <Options  
>
to access the following options:  
2. Press the Navigation keys to access the math  
function you want.  
New: add a new task.  
Mark: change the status of the task.  
Edit: edit the task.  
3. Enter the second number.  
4. Press [ ] to view the result.  
Sort: sort the task by priority or status.  
Copy: copy the task.  
To do list (Menu 7.5)  
Copy to calendar: copy the task to the calendar  
as a memo.  
Use this menu to create tasks and manage them.  
Creating the To do list  
1. Press <New>.  
Delete: delete the task.  
Delete all: delete all tasks.  
Exit: exit the To do list menu.  
2. Enter the first task and press <OK>.  
60  
     
Play: play back your voice memo.  
Voice memo (Menu 7.6)  
Send: send the voice memo via MMS.  
Rename: change the name of the voice memo.  
Use this menu to record voice memos. A voice memo  
can be up to 30 seconds.  
Information: view the properties of the voice  
memo.  
Voice record (Menu 7.6.1)  
1. Press <Record> to start recording.  
2. Speak into the microphone.  
Delete: delete the voice memo.  
Delete all (Menu 7.6.3)  
3. When you press <Stop>, or if the recording time  
expires, the following options display:  
Use this menu to delete all of the voice memos you  
have recorded at one time.  
Replay: play back your memo.  
Re-record: discard the memo and records  
another one.  
Memory status (Menu 7.6.4)  
You can check the total amount of memory and the  
amount of memory currently in use for voice memos.  
Save: save the memo.  
Quit: cancel your recording and exits the  
Voice memo menu.  
Currency exchange (Menu 7.7)  
4. Select Save to save the voice memo.  
Use this menu to do currency conversions.  
5. Enter a name of the voice memo and press <OK>.  
1. Enter the rate of foreign currency and press  
<OK>.  
Memo list (Menu 7.6.2)  
2. Enter the amount of the source currency you want  
Use this menu to access the list of voice memos you  
have recorded. Select a memo to play it  
to convert and press <OK>.  
The amount you entered and its equivalent value  
in the foreign currency display.  
Press <Options> to access the following options:  
61  
     
Menu functions  
Paste: paste the number into the normal dialling  
mode.  
Phonebook (Menu 8)  
You can store phone numbers on your SIM card and in  
your phone’s memory. The SIM card and phone’s  
memory are physically separate, but they are used as  
a single entity called Phonebook.  
Edit: edit the entry information.  
Delete: delete the number from Phonebook.  
Copy: copy the number to the phone’s memory or  
SIM card.  
To access this menu, press <Menu> in Idle mode and  
select Phonebook, or press <Phonebook>.  
Caller group: assign a caller group.  
Add entry: add a new entry.  
Search (Menu 8.1)  
New entry (Menu 8.2)  
Use this menu to search for numbers in Phonebook.  
Use this menu to add a new entry to Phonebook.  
Finding an entry  
Storing an entry in the phone’s memory  
1. Select a number type.  
1. Enter the first few letters of the name that you  
want to find.  
2. Select the name you want from the list.  
2. Select Phone  
.
3. Press [  
] to dial the number, or <Options> to  
3. Enter a name and press <OK>.  
access Phonebook options.  
4. Enter a number or an e-mail address and press  
<Save>.  
Using Phonebook options  
5. Change the location number, if you want, and  
While viewing an entry in Phonebook, press  
press <OK>.  
<Options> to access the following options:  
62  
               
Call ringtone: set a ring tone for incoming calls  
from the group.  
Storing an entry on the SIM card  
1. Select a number type.  
SMS tone: set a ring tone for incoming messages  
from the group.  
2. Select SIM  
.
3. Enter a name and press <OK>.  
Graphic: set a graphic icon for incoming calls from  
the group.  
4. Enter a number and press <Save  
>
5. Change the location number, if you want, and  
Group name: assign a name to the group.  
press <OK>.  
Speed-dial list (Menu 8.5)  
Group search (Menu 8.3)  
Use this menu to assign speed dial numbers (2 to 9) to  
eight of your most frequently called numbers.  
Use this menu to search your entries in Phonebook in  
caller groups.  
Assigning speed dial entries  
1. Enter the first few letters of the group name.  
2. Select a group and press <View>.  
3. Select the name you want.  
1. Select a key location from  
for your voice mail server.  
2
to  
9. Key  
1
is reserved  
2. Select the name you want from the Phonebook list.  
3. Select the number you want.  
4. Press [  
] to dial the number or <Options> to  
access Phonebook options.  
Managing speed dial entries  
Edit group (Menu 8.4)  
While viewing the Speed dial screen, press  
Use this menu to edit your caller groups’ properties.  
<Options> to access the following options:  
From the group list, press <Options> to access the  
following options:  
Change: assign a different number to an assigned  
key.  
63  
       
Menu functions  
Delete: delete the setting for the key.  
SDN (Menu 8.8)  
Delete all: delete the settings for all the keys.  
Number: view the number assigned to the key.  
This menu is available if your SIM card supports  
Service Dialling Numbers (SDN). Use this menu to  
view the list of SDNs assigned by your service  
provider, including emergency numbers, directory  
enquiries, and voice mail numbers.  
Dialling speed dial entries  
Press and hold the appropriate key in Idle mode.  
Scroll to the number you want and press <Dial> or  
Delete all (Menu 8.6)  
[
].  
Use this menu to delete all of the entries from  
Phonebook.  
Phone settings (Menu 9)  
Use this menu to customise your phone settings. You  
can also reset the settings to their default values.  
1. Press [ ] to check the location(s) to be cleared.  
2. Press <Delete>.  
3. Enter the phone password and press <OK>.  
4. Press <Yes> twice to confirm the deletion.  
To access this menu, press <Menu> in Idle mode and  
select Phone settings  
.
Memory status (Menu 8.7)  
Display settings (Menu 9.1)  
Use this menu to check the total number of entries  
you can store and the number of the entries you have  
stored in Phonebook.  
Use this menu to change settings for the display and  
light.  
Wallpaper (Menu 9.1.1)  
You can change the background image and the  
settings for the text of Idle mode.  
64  
         
Wallpaper list: select a background image.  
Dim: select the length of time the display is in  
Dimming mode after the backlight turns off. After a  
specified time, the display turns off and the  
analogue clock displays.  
Text display: determine the phone displays the  
time and date.  
Text colour: select a colour of the text  
Graphic logo (Menu 9.1.5)  
Auto keypad lock (Menu 9.1.2)  
Use this menu to display your service provider’s logo  
instead of its name.  
Your phone is equipped with Keypad Lock function, to  
prevent accidental key presses from affecting the  
phone.  
Dialling font colour (Menu 9.1.6)  
Use this menu to select the colour type of the font for  
digits to be displayed when you enter a phone number  
for dialling.  
Use this menu to set whether the phone locks the  
keypad automatically if no key has been pressed  
within a given period of time, or you lock the keypad  
manually by holding [ ].  
Greeting message (Menu 9.2)  
Contrast (Menu 9.1.3)  
Use this menu to enter the greeting that is displayed  
briefly when the phone is switched on.  
You can adjust the brightness of the display for  
varying lighting conditions.  
Backlight (Menu 9.1.4)  
Own number (Menu 9.3)  
You can select the length of time the backlight and the  
display stay on.  
Use this feature to check your phone numbers, or to  
assign a name to each of the numbers. Changes made  
here do not affect the actual subscriber numbers on  
your SIM card.  
On: select the length of time the backlight stays  
on.  
65  
       
Menu functions  
Change PIN (Menu 9.5.2)  
Language (Menu 9.4)  
Use this menu to change your PIN. The PIN Check  
feature must be enabled to use this feature.  
Use this menu to select one of several languages for  
the display text.  
Phone lock (Menu 9.5.3)  
When you select Automatic, the phone uses the  
language that the SIM card uses.  
The Phone lock feature locks the phone from  
unauthorised use.  
Security (Menu 9.5)  
When this feature is enabled, you must enter a 4- to  
8-digit phone password each time the phone is  
switched on.  
Use this menu to protect the phone against  
unauthorised use by managing the several access  
codes of your phone and SIM card.  
The password is preset to 00000000. To change the  
If you enter an incorrect PIN /PIN 2 three times in  
succession, the SIM card is blocked. To unblock it  
you need to enter your PUK/PUK2 (Personal  
Unblocking Key). The codes are supplied by your  
network operator.  
password, use the Change password menu.  
Change Password (Menu 9.5.4)  
Use this menu to change your phone password. The  
password is preset to 00000000  
.
Privacy (Menu 9.5.5)  
PIN check (Menu 9.5.1)  
Use this menu to lock your media contents, including  
MMS messages, voice memos, images, and sounds.  
The 4-to 8-digit PIN (Personal Identification Number)  
protects your SIM card against unauthorised use.  
When this feature is enabled, the phone requires your  
PIN each time it is switched on.  
1. Press [ ] to check the item(s) to be locked.  
2. Press <OK> to lock the marked items.  
3. Enter the phone password and press <OK>.  
66  
               
To access a locked item, you need to enter the phone  
password.  
Auto redial: make up to ten attempts to redial a  
phone number after an unsuccessful call.  
Anykey answer: answer an incoming call by  
pressing any key, except [ ] or <Reject>.  
SIM lock (Menu 9.5.6)  
The SIM lock feature allows your phone to work only  
with the current SIM by assigning a SIM lock code. You  
must enter the SIM lock code to use a different SIM  
card.  
When this option is disabled, you must press [  
]
or <Accept> to answer a call.  
Short cut (Menu 9.7)  
FDN mode (Menu 9.5.7)  
You can use the Navigation keys as shortcut keys to  
access specific menus directly from Idle mode. Use  
this menu to change the shortcut assignments for the  
keys.  
If supported by your SIM card, Fixed Dialling Number  
(FDN) mode restricts your outgoing calls to a limited  
set of phone numbers. When this feature is enabled,  
you can make calls only to phone numbers stored on  
the SIM card. To use this feature, you must enter your  
PIN2.  
1. Select the key to be used as a shortcut key.  
2. Select the menu that will be assigned to the key.  
Change PIN2 (Menu 9.5.8)  
Reset settings (Menu 9.8)  
If supported by your SIM card, the Change PIN2  
feature changes your current PIN2.  
Use this menu to reset the phone to its default  
settings.  
Enter the 4- to 8-digit phone password and press  
Extra settings (Menu 9.6)  
<
OK>.  
The password is preset to 00000000. You can  
change this password. p. 66  
You can turn the automatic redialling or answering  
features on or off.  
67  
                 
Solve problems  
“Enter PUK”  
The PIN code has been entered incorrectly three  
Solve problems  
times in succession, and the phone is now blocked.  
Enter the PUK supplied by your service provider.  
To save the time and expense of an unnecessary service  
call, perform the simple checks in this section before  
contacting a service professional.  
“No service,” “Network failure,” or “Not done”  
displays  
When you switch on your phone, the following  
messages may appear:  
The network connection has been lost. You may be  
in a weak signal area. Move and try again.  
“Insert SIM card”  
You are trying to access an option for which you  
have no subscription with your service provider.  
Contact the service provider for further details.  
Be sure that the SIM card is correctly installed.  
“Phone locked Enter password”  
The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
You have entered a number but it was not  
dialled  
Be sure that you have pressed [ ].  
“Enter PIN”  
Be sure you have accessed the right cellular  
network.  
You are using your phone for the first time. You  
must enter the PIN supplied with the SIM card.  
Be sure that you have not set an outgoing call  
barring option.  
The PIN Check feature is enabled. Every time the  
phone is switched on, the PIN has to be entered.  
To disable this feature, use the PIN check menu.  
68  
 
Your correspondent cannot reach you  
The audio quality of the call is poor  
Be sure your phone is switched on. ([ ] pressed  
for more than one second.)  
Check the signal strength indicator on the display  
). The number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
(
Be sure you are accessing the correct cellular  
network.  
Try moving the phone slightly or moving closer to a  
window if you are in a building.  
Be sure that you have not set an outgoing call  
barring option.  
No number is dialled when you re-call a  
Contacts entry  
Your correspondent cannot hear you speaking  
Use the Phonebook Search feature to ensure the  
number has been stored correctly.  
Be sure you have switched off the microphone.  
Be sure you are holding the phone close enough to  
your mouth. The microphone is located at the  
bottom of the phone.  
Re-store the number, if necessary.  
If the above guidelines do not help you to  
solve the problem, take note of:  
The phone starts beeping and “Low battery”  
flashes on the display  
The model and serial numbers of your phone  
Your warranty details  
Your battery is insufficiently charged. Recharge the  
battery.  
A clear description of the problem  
Then contact your local dealer or Samsung after-sales  
service.  
69  
Health and safety information  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest certified  
power level, the actual SAR level of the phone while  
operating can be well below the maximum value. This is  
because the phone is designed to operate at multiple  
power levels so as to use only the power required to reach  
the network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Health and safety information  
SAR certification information  
This phone meets European Union (EU) requirements  
concerning exposure to radio waves.  
Your mobile phone is a radio transmitter and receiver. It is  
designed and manufactured to not exceed the limits for  
exposure to radio-frequency (RF) energy, as recommended  
by the EU Council. These limits are part of comprehensive  
guidelines and establish permitted levels of RF energy for  
the general population. The guidelines were developed by  
independent scientific organisations through the periodic  
and thorough evaluation of scientific studies. The limits  
include a substantial safety margin designed to ensure the  
safety of all persons, regardless of age and health.  
Precautions when using batteries  
Never use a charger or battery that is damaged in any  
way.  
Use the battery only for its intended purpose.  
The exposure standard for mobile phones employs a unit of  
measurement known as Specific Absorption Rate (SAR).  
The SAR limit recommended by the EU Council is 2.0W/kg.  
If you use the phone near the network’s base station,  
it uses less power. Talk and standby time are greatly  
affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
*
The highest SAR value for this model phone was 0.348W/kg.  
Battery charging time depends on the remaining  
battery charge, the type of battery, and the charger  
used. The battery can be charged and discharged  
hundreds of times, but it will gradually wear out. When  
the operation time is noticeably shorter than normal, it  
is time to buy a new battery.  
* The SAR limit for mobile phones used by the public is 2.0 watts/  
kilogram (W/kg) averaged over ten grams of body tissue. The  
limit incorporates a substantial margin of safety to give addi-  
tional protection for the public and to account for any variations  
in measurements. The SAR values may vary, depending on  
national reporting requirements and the network band.  
70  
     
If left unused, a fully charged battery will discharge  
itself over time.  
Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
Use only Samsung-approved batteries, and recharge  
your battery only with Samsung-approved chargers.  
Disconnect the charger from the power source when it  
is not in use. Do not leave the battery connected to a  
charger for more than a week, since overcharging may  
shorten its life.  
Extreme temperatures will affect the charging capacity  
of your battery: it may require cooling or warming  
first.  
Do not leave the battery in hot or cold places because  
the capacity and lifetime of the battery will be  
reduced. Try to keep the battery at room temperature.  
A phone with a hot or cold battery may not work  
temporarily, even when the battery is fully charged. Li-  
ion batteries are particularly affected by temperatures  
below 0°C (32°F).  
Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object like a coin,  
clip or pen causes a direct connection between the +  
and – terminals of the battery (metal strips on the  
battery). For example, do not carry a spare battery in  
a pocket or bag where the battery may contact metal  
objects. Short-circuiting the terminals may damage  
the battery or the object causing the short-circuiting.  
Road safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone while driving, follow local  
regulations in the country or region you are in.  
Operating environment  
Remember to follow any special regulations in force in the  
area you are in, and always switch off your phone  
whenever it is forbidden to use it, or when it may cause  
interference or danger.  
When connecting the phone or any accessory to another  
device, read its user’s guide for detailed safety  
instructions. Do not connect incompatible products.  
As with other mobile radio transmitting equipment, users  
are advised that for the satisfactory operation of the  
equipment and for the safety of personnel.  
71  
 
Health and safety information  
Other medical devices  
Electronic devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is  
adequately shielded from external RF energy.  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic  
equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to  
discuss alternatives.  
Your physician may be able to assist you in obtaining this  
information.  
Switch off your phone in health care facilities when  
regulations posted in these areas instruct you to do so.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker. These recommendations  
are consistent with the independent research and  
recommendations of Wireless Technology Research. If you  
have any reason to suspect that interference is taking  
place, switch off your phone immediately.  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with  
the manufacturer or its representative regarding your  
vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Hearing aids  
Posted facilities  
Some digital wireless phones may interfere with some  
hearing aids. In the event of such interference, you may  
wish to consult your hearing aid manufacturer to discuss  
alternatives.  
Switch off your phone in any facility where posted notices  
require you to do so.  
72  
Potentially explosive environments  
Emergency calls  
Switch off your phone when in any area with a potentially  
explosive atmosphere, and obey all signs and instructions.  
Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
This phone, like any wireless phone, operates using radio  
signals, wireless, and landline networks as well as user-  
programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never  
rely solely on any wireless phone for essential  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants, or where blasting operations are  
in progress.  
communications like medical emergencies.  
To make or receive calls, the phone must be switched on  
and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Areas with a potentially explosive atmosphere are often  
but not always clearly marked. They include the areas  
below decks on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas, such as  
propane or butane, areas where the air contains chemicals  
or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn  
off your vehicle engine.  
To make an emergency call:  
1. Switch on the phone.  
2. Key in the emergency number for your present  
location. Emergency numbers vary by location.  
3. Press [  
].  
Certain features like Call Barring may need to be  
deactivated before you can make an emergency call.  
Consult this document and your local cellular service  
provider.  
73  
 
Health and safety information  
Other important safety information  
Care and maintenance  
Only qualified personnel should service the phone or  
install the phone in a vehicle. Faulty installation or  
service may be dangerous and may invalidate any  
warranty applicable to the device.  
Check regularly that all wireless phone equipment in  
your vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the  
phone, its parts, or accessories.  
For vehicles equipped with an air bag, remember that  
an air bag inflates with great force. Do not place  
objects, including installed or portable wireless  
equipment, in the area over the air bag or in the air  
bag deployment area. Improperly installed wireless  
equipment could result in serious injury if the air bag  
inflates.  
Switch off your phone before boarding an aircraft. It is  
dangerous and illegal to use wireless phones in an  
aircraft because they can interfere with the operation  
of the aircraft.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the  
offender, or legal action, or both.  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many  
years.  
Keep the phone and all its parts and accessories out of  
the reach of small children.  
Keep the phone dry. Precipitation, humidity, and  
liquids contain minerals that corrode electronic  
circuits.  
Do not use the phone with a wet hand. Doing so may  
cause an electric shock to you or damage to the  
phone.  
Do not use or store the phone in dusty, dirty areas, as  
its moving parts may be damaged.  
Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain  
plastics.  
Do not store the phone in cold areas. When the phone  
warms up to its normal operating temperature,  
74  
 
moisture can form inside the phone, which may  
damage the phone’s electronic circuit boards.  
Do not drop, knock, or shake the phone. Rough  
handling can break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it with a  
soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device’s  
moving parts and prevent proper operation.  
Do not put the phone in or on heating devices, such as  
a microwave oven, stove, or radiator. The phone may  
explode when overheated.  
Use only the supplied or an approved replacement  
antenna. Unauthorised antennas or modified  
accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger, or any accessory is not  
working properly, take it to your nearest qualified  
service facility. The personnel there will assist you, and  
if necessary, arrange for service.  
75  
Index  
missed • 41  
received • 41  
Call time • 41  
Caller ID • 44  
Calls  
layout • 10  
settings • 64  
DTMF tones, send • 39  
Internet • 54  
A
ABC mode, text input • 34  
Alarm • 58  
K
Key tones  
Alert • 45, 46  
Answering  
E
sending • 38  
setting • 45  
Keys, description • 9  
Emergency calls • 73  
Extra tones 46  
answering • 37  
barring • 43  
holding • 38  
redialling • 36  
rejecting • 37  
call • 37  
second call • 39  
Anykey answer • 67  
Auto redial • 67  
F
L
FDN (Fixed Dial Number) mode  
Language, select • 66  
Last number, redial • 36  
Locking  
• 67  
B
waiting • 43  
Funbox • 54  
Backlight time, set • 65  
Band selection • 44  
Barring, calls • 43  
Battery  
CB (Cell Broadcast) messages •  
49  
Characters, enter • 19  
Conference call • 39  
Connection tone • 46  
phone • 66  
SIM card • 67  
Low battery indicator • 8  
G
Games • 56  
Greeting message • 65  
charging • 7  
M
H
low indicator • 8  
precautions • 70  
Broadcast messages • 49  
Browser, WAP • 54  
Memory status  
downloaded items • 58  
messages • 53  
phonebook • 64  
Message tone • 45  
Messages  
Holding, call • 38  
D
Deleting  
I
call records • 40  
MMS • 50, 51  
phonebook • 64  
SMS • 47  
Icons, description • 10  
Images, downloaded • 57  
Inbox, messages  
MMS • 50  
SMS • 47  
International calls • 36  
C
Calculator • 60  
Call costs • 42  
Call records  
dialled • 41  
cell broadcast • 49  
greeting • 65  
MMS • 50  
Delivery reports, message • 53  
Dialled calls • 41  
Display  
76  
 
SMS • 46  
voice • 49  
web • 54  
Own number • 65  
Recording  
voice memos • 61  
Redialling  
automatically • 67  
manually • 36  
Resetting phone • 67  
Ring  
tone • 45  
volume • 45  
Road safety • 71  
Switching on/off  
microphone • 38  
phone • 8  
P
Password  
Minute minder • 46  
Missed calls • 41  
MMS messages  
T
call barring • 43  
phone • 66  
Phone  
Templates  
MMS • 51  
creating/sending • 51  
deleting • 51  
setting • 53  
care and maintenance •  
74  
display • 10  
icons • 10  
locking • 66  
resetting • 67  
switching on/off • 8  
unpacking • 6  
SMS • 48  
Text input mode, change • 19  
Text, enter • 19  
Tone  
viewing • 50, 51  
Multi-party calls • 39  
Muting  
S
call ringer • 45  
connect • 46  
extra • 46  
keypad • 45  
message • 45  
power on/off • 46  
Safety  
key tones • 38  
microphone • 38  
information • 70  
precautions • 3  
SDN(ServiceDiallingNumbers)  
• 64  
Security, calls • 66  
Sent messages  
MMS • 50, 51  
SMS • 47  
N
Phonebook  
Names  
copying • 62  
deleting • 64  
editing • 62  
entering • 19  
searching • 62  
Network selection • 43  
Network services • 42  
Number  
V
Voice mail • 49  
Voice memos  
recording • 61  
Voicemail server • 49  
options • 62  
speed-dialling • 63  
PIN  
SIM card  
dialling/searching • 37  
storing • 62  
changing • 66  
locking • 66  
PIN2, change • 67  
Power on/off tone • 46  
Privacy • 66  
inserting • 7  
locking • 67  
W
SMS messages  
creating/sending • 47  
viewing • 47  
Sound settings • 45  
Sounds, downloaded • 57  
Speed-dial • 63  
Waiting call • 43  
WAP browser  
access • 54  
O
Organiser • 58  
Outbox, messages  
MMS • 51  
bookmarks • 55  
cache, clear • 56  
World time • 58  
R
SMS • 47  
Received calls • 41  
77  

Toshiba Protege PT310U User Manual
Toastmaster ME8TSB User Manual
Sunbeam Programmable Coffemaker 6396 User Manual
Samsung GT C3010S User Manual
Salton FSCM100 User Manual
Philips CD 615 User Manual
Palm Centro User Manual
Nortel Networks Nortel Passport 6400 User Manual
Nokia NSERIES N95 4 User Manual
Nokia 6610 User Manual