Sagem myX3 2 User Manual

251400892-Couv-myX3-2-en.qxd 27/11/03 9:50 Page 1  
*251400892*  
SAGEM SA  
Mobile Phones Division  
Le Ponant de Paris - 27, rue Leblanc - 75512 PARIS CEDEX 15 - FRANCE  
SAGEM SA - Société anonyme à directoire et conseil de surveillance  
capital : 33 300 000 - 562 082 909 RCS PARIS  
251400892 _myX3-2_lu_2e-3ecouv_en.fm Page 1 Jeudi, 27. novembre 2003 2:09 14  
You have just purchased  
a
SAGEM mobile phone  
, and we congratulate you on your choice.  
Your phone can be used internationally in the various dual  
band networks (GSM 900 MHz and DCS 1800 MHz)  
depending on the roaming arrangements with your  
operator.  
We remind you that this phone is approved to meet  
European standards.  
We recommend that you read this handbook carefully  
before using your phone efficiently and in the best  
conditions.  
WARNING  
Depending on the configuration of the networks and the  
associated subscriber cards, some functions may not be  
available.  
Ensure that your SIM card is a 3 V (Volt) SIM type that is  
compatible with your phone. Inserting an incompatible card  
will be indicated by  
a
message when your phone is  
switched on. Contact your operator.  
SAGEM is a trademark of SAGEM SA.  
AT is a registered trademark of Hayes Microcomputer Products Inc.  
Hates is a registered trademark of Hayes Microcomputer Products Inc.  
T9™ Text Input is a registered trademark of ©Tegic Communications Inc.  
T9 is protected by one or more of the following US patents: 5,818,437,  
5,953,541, 5,187,480, 5,945,928, 6,011,554 and other patents are being  
applied for worldwide.  
251400892 _myX3-2_lu_2e-3ecouv_en.fm Page 2 Jeudi, 27. novembre 2003 2:09 14  
Weight: 89 g  
Size: 99.4 x 44.8 x 20.5 mm  
Volume: 75 cm3  
Original battery: Lithium ion 860 mAh  
Battery life calls/standby: up to 5 h / 340 h  
Multimedia objects supported:  
Audio formats: iMelody, Midi, wave, HiFi  
Graphic formats: bmp, png, gif, jpeg  
Size of memory available for ring tones and images to be  
downloaded: up to 400 KB.  
Using temperature: from - 10°C to + 55°C  
The technical characteristics of the product are subject to  
change without notice.  
251400892 myX3-2 English.book Page 1 Jeudi, 27. novembre 2003 2:10 14  
Conformance Document  
SAGEM SA declare under its sole responsibility that the product Dual Band GSM/DCS Type B2003+ conforms to the  
requirements of the following EEC directives:  
EEC Directive  
Safety  
1999/5/CE  
EN 60950  
EMC  
EN 301 489-1  
EN 301 489-7  
Low voltage directive  
Network  
73/23/CEE  
3GPP TS 51.010-1 v 5.2.0 selected with GCF-CC v 3.10.0 included  
Requirements GT01 v 4.7.0  
TBR 19 Edition 5  
TBR 20 Edition 3  
TBR 31 Edition 2  
TBR 32 Edition 2  
EN 301 419-1  
EN 301511  
Health  
EN 50360  
EN 50361  
1
251400892 myX3-2 English.book Page 2 Jeudi, 27. novembre 2003 2:10 14  
Menus  
Phonebook  
Phonebook menu  
Background  
Colours  
Security  
Keypad locking  
PIN number  
PIN number 2  
Phone code  
Confidentiality  
Operator  
Wallpapers  
Messages  
Compose  
Inbox  
Screensavers  
Greeting msg  
Settings  
Date/Time  
My objects  
Languages  
Networks  
Outbox  
Drafts  
Call barring  
Fixed dialling  
Options  
Memory  
Local info.  
Costs  
(depending on model)  
Contrast  
WAP  
Accessories  
Calculator  
Converter  
Alarm  
Energy saving  
Short cuts  
Games  
Downloaded games  
Calls  
Picture puzzle  
Calls forwarded  
View last calls  
Counters  
Timer  
Sounds  
Ring tones  
Vibrate  
Car kit  
Data  
Display number  
Call waiting  
Auto redial  
Services  
Silent mode  
Beeps  
Blacklist  
Answ. phone nb.  
2
   
251400892 myX3-2 English.book Page 6 Jeudi, 27. novembre 2003 2:10 14  
Your phone package - Accessories  
When you open the box, check that all the items are present:  
1 - Phone  
2 - Mains charger  
1
3 - Battery  
4 - User manual  
2
4
3
Accessories  
You can also find (as an option) or order the following accessories:  
Pedestrian kit (*)  
Extra battery  
Extra charger (*)  
Desktop support (*)  
Cable to connect your  
to a PC USB or serial port (*)  
CD driver to synchronise your phone with your PC  
Cigar lighter adapter (*)  
Coloured covers  
Hands-free kit (*)  
Strap  
(*) These accessories are identical to the ones provided for the myX-3, myX-5 and myX-6 series.  
6
       
251400892 myX3-2 English.book Page 7 Jeudi, 27. novembre 2003 2:10 14  
Description  
Stop key:  
Programmable keys  
and Shortcut keys  
Hold down: Switches the phone off.  
Press briefly:  
In a call context: Rejects a call - hangs up  
In menus: Return to home page.  
Start key: Press briefly: Starts phone  
In call context: Call - reception of a call - hands-free mode  
Left programmable key:  
In home page: Access to certain functions (shortcuts)  
In menus: Cancel (or return) as indicated on screen  
During a call: Reduces the volume  
Right programmable key:  
In home page: Access to certain functions (shortcuts)  
In menus: Accept, choose as shown on screen  
During a call: Increases the volume  
Up key: Previous choice / increase value / top  
Down key: Down choice / reduce value / down  
Left key: Up input field / move left  
Right key: Down input field / move right  
Key :  
Hold down: In home page: Silent mode  
Press briefly + OK (right programmable key) activates or deactivates  
keypad locking  
In call reception mode: Short press stops ring tone  
In ring tone setting mode: Activates/deactivates ring tone  
# Key: Zoom mode (see Messages and WAP menus)  
7
         
251400892 myX3-2 English.book Page 8 Jeudi, 27. novembre 2003 2:10 14  
Principles of navigation  
These basic principles bring a great deal of intuitiveness to your phone  
All the active areas on a white background (icon selector, programmable  
keys, menu selector, choice list)  
Accept by pressing the right programmable key  
.
Cancel by pressing the left programmable key  
.
The tabs on the sides at the bottom of the screen refer to the  
Programmable keys (and not to the left/right keys).  
1st level  
In the menus a title bar indicates the down higher level.  
The up and down  
arrows are used to navigate from a menu to the  
other (or from one a sub-menu to the other).  
The right programmable key  
is used to go from a menu to a sub-  
is used to go from a sub-menu to a  
menu.  
The left programmable key  
menu.  
The first menu level can be identified by a large animated icon in the  
centre of the screen.  
2nd level  
The second menu level can be identified by a large static icon in the  
centre of the screen.  
The lowest sub-menus are lists.  
The Stop  
key (press briefly) is used to return to the home page  
(current function is abandoned).  
3nd level  
8
     
251400892 myX3-2 English.book Page 9 Jeudi, 27. novembre 2003 2:10 14  
Home page  
The home page contains the following  
1 - The title bar icons:  
Battery  
wed 12 NOV  
Calls forwarded  
Call (establishing the call)  
Call (hands free)  
Menu  
SMS (reception of an SMS)  
Silent mode  
Message in answer phonebox  
WAP (@)  
GPRS  
Home zone  
HPLMN / roaming  
Keypad locking + WTLS (exclusive functions)  
Protected WAP logon  
Protected WAP logon icon with certificate  
Signal strength level (5 bars).  
2 - Date and time, in digital or analogue mode  
3 - Network provider  
4 - Tab centred on down line:  
the main "menu" tab shows that the menu can be accessed via  
the down / up keys.  
The following information may also be displayed:  
"1 message received"; or "1 call".  
They can be deleted by pressing the Stop  
key briefly.  
9
     
251400892 myX3-2 English.book Page 10 Jeudi, 27. novembre 2003 2:10 14  
Activating your phone  
Information on the SIM card  
To use your phone, you have a smart card called a SIM  
card. It contains all the information needed by the network  
as well as other information unique to you and that you  
can modify:  
Secret codes (PIN(s): Personal Identification Numbers),  
these codes allow you to restrict access to your SIM card.  
Phonebook,  
Messages,  
How special services work.  
Your phone is compatible with the different SIM cards  
offered by operators.  
It is also compatible with the SIM/WIM cards (cards  
containing the WIM module in addition (WIM = Wireless  
Identity Module)  
communications.  
that is used for secure WAP  
WARNING  
This card must be handled and stored with care to avoid damaging it by scraping or bending it. If you should lose  
your SIM card, contact your operator or your SMC (Services Marketing Company) immediately.  
Comment: do not leave your SIM card within the reach of young children.  
10  
           
251400892 myX3-2 English.book Page 11 Jeudi, 27. novembre 2003 2:10 14  
Activating your phone  
Installing the SIM card and installing the battery  
The SIM card is inserted under the phone's battery.  
Ensure that the phone is switched off and the charger  
disconnected.  
Turn phone over and remove rear cover by pressing the  
two lock buttons to lift bottom end first.  
1
Take out battery if already installed.  
2
3
1
Slide card fully under retaining plate with gold-plated  
contacts facing phone and bevelled corner pointing as  
shown on drawing of phone.  
2
Insert battery into position by first positioning top section  
with connectors.  
4
5
Replace cover by engaging top hook first, then push down  
back of rear cover.  
3
4
5
11  
     
251400892 myX3-2 English.book Page 12 Jeudi, 27. novembre 2003 2:10 14  
Activating your phone  
Changing the cover  
Remove rear cover as above.  
Turn phone over.  
1
Lift front cover in same way as rear cover. Remove panel  
2
3
(electronic card).  
Position keypad in new cover, ensuring it is free of dust.  
Insert panel into front cover.  
1
3
2
4
Do as above to replace rear cover.  
4
12  
   
251400892 myX3-2 English.book Page 13 Jeudi, 27. novembre 2003 2:10 14  
Activating your phone  
Charging the battery  
Your phone is powered by a rechargeable battery. A new  
battery must be charged for at least 4 hours before being  
used for the first time. It reaches its optimum capacity  
after a few cycles of use.  
When your battery has been discharged, the phone  
displays the state (empty battery icon flashes). In this  
case recharge your battery for at least 15 minutes before  
making any more calls so as to avoid being cut off mid-  
call.  
To recharge the battery:  
Connect the charger to a mains socket.  
Plug the end of the cable into the connector at the base of  
the phone.  
The phone starts to charge up. Charging stops by itself.  
Disconnect the cable.  
It is possible that the battery may heat up slightly during  
charging; this phenomenon is normal.  
WARNING  
There is danger of explosion if the battery is replaced incorrectly or if it is exposed to fire.  
Do not short circuit it.  
The battery does not have any part that you can change.  
Do not try to open the battery casing.  
Use only the appropriate chargers and batteries shown in the manufacturer's catalogue.  
Used batteries must be disposed of in the appropriate places.  
It is advisable to remove the battery if your phone is not used for extended periods.  
13  
   
251400892 myX3-2 English.book Page 14 Jeudi, 27. novembre 2003 2:10 14  
Activating your phone  
Do NOT obstruct the antenna with your fingers  
The antenna is integrated in your phone, under the back  
cover at the top.  
Avoid putting your fingers on this area when the phone is  
switched ON.  
If your fingers obstruct the antenna, the phone may have  
to operate with  
a
higher power level than usual;  
decreasing its efficiency quickly. It could also affect the  
quality of your communications.  
WARNING  
The use of a hands-free kit is recommended when using the phone frequently.  
14  
     
251400892 myX3-2 English.book Page 15 Jeudi, 27. novembre 2003 2:10 14  
My phone in 5 minutes  
You are now ready to use your phone for the first time.  
Getting started  
Switch on the phone by pressing the Start  
appears.  
key. A short display  
This is your SIM's secret code.  
PIN Number  
If access to the SIM card is protected, the device prompts you to enter  
the PIN number:  
Enter the code between 4 and 8 digits given to you when the SIM card  
was issued. These digits do not appear on the screen for security  
reasons.  
Press the right programmable key  
to accept.  
If your phone indicates that the SIM is missing, press the Stop  
key  
to switch off your phone and check that the SIM card is correctly installed.  
WARNING  
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:  
- Enter "**05*".  
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and accept.  
- Enter your PIN number and accept.  
- Enter your PIN number again and accept.  
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then  
contact your operator or your SMC to obtain a new card.  
15  
         
251400892 myX3-2 English.book Page 16 Jeudi, 27. novembre 2003 2:10 14  
My phone in 5 minutes  
Setting time and  
date  
When you use your phone for the first time, you need to set the date and  
time.  
In due course, when the battery is completely discharged, or if it has been  
removed, you will be prompted systematically to confirm date and time.  
Setting the date:  
Set the date by entering it directly in numerical form or by using the  
down  
Use the right key  
Once the date is correct, press the right programmable key  
accept  
/
up  
keys to decrease or increase the default values.  
(or left key  
) to access the next (or last ) data input field.  
to  
.
Setting the time: Same procedure as for setting the date.  
Network  
From now on the phone hunts for a network on which it can make calls.  
If it finds one, it displays the name of the network on the screen. You are  
then ready to send or receive a call.  
If the network icon appears, calls are possible on your operator's network.  
If the letter R and a network name are displayed, calls are possible on the network of a different operator.  
If the letter R is displayed without any network name, only the emergency services are accessible (ambulance,  
police, fire brigade).  
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal  
strength indicator received allows you to display the quality of reception. If it indicates less than three bars,  
search for better reception in order to call in good conditions.  
16  
       
251400892 myX3-2 English.book Page 17 Jeudi, 27. novembre 2003 2:10 14  
My phone in 5 minutes  
First call  
Dial the number of your correspondent.  
Press the Start  
key.  
During the call, the call in progress icon flashes on screen and tones may  
indicate the establishment of the call.  
(*)  
Once communication has been established, the call icon stops flashing.  
You can adjust the sound level (volume) using the left and right  
programmable  
keys.  
At the end of the conversation press the Stop  
key to hang up.  
(*) Dummy phone number shown as an example.  
International call  
Press 0 (hold down) to display "+", then dial the country code without waiting for the dial tone, then the number of  
the called party.  
Emergency services  
Depending on the operators you can obtain the emergency service with or without SIM card or when the keypad  
is locked. It is enough to be in an area served by a network.  
To obtain the international emergency service, dial 112 then press the Start  
key.  
17  
       
251400892 myX3-2 English.book Page 18 Jeudi, 27. novembre 2003 2:10 14  
My phone in 5 minutes  
Receiving a call  
When you receive a call, the number of your correspondent is  
displayed when it is presented by the network.  
Press the Start  
answer, and speak.  
key or the right programmable key  
to  
(*)  
To refuse the call, press the Stop  
key or the left programmable  
key  
.
To stop the ring tone or the vibrate, without refusing the call, press  
the key.  
WARNING:  
Pressing the Start key a second time launches hands-free mode, in  
this mode do not bring the phone up to your ear.  
All the numbers corresponding to incoming and outgoing calls are logged  
in the list of recent calls.  
Switching off  
Press the Stop  
key for one second.  
The end message is displayed. The phone switches off.  
(*) Dummy phone number shown as an example.  
18  
         
251400892 myX3-2 English.book Page 19 Jeudi, 27. novembre 2003 2:10 14  
First setting: Ring tone  
We want to familiarise you with the interface of your new phone, using a  
simple setting: choosing a ring tone and adjusting the volume.  
Volume and ring  
tone  
This menu allows you to allocate a ring tone to each type of event.  
In the home page, press the down  
key to access the main menus.  
The first menu offered is Phonebook  
.
Press the down  
key four times to access the Sounds menu.  
Enter this menu by pressing the right programmable key  
.
You can access the second level of the menu that contains four sub-  
menus: Ring tones, Vibrate, Silent mode, beeps.  
The first sub-menu offered is Ring tones  
.
Enter by pressing the right programmable key  
.
19  
       
251400892 myX3-2 English.book Page 20 Jeudi, 27. novembre 2003 2:10 14  
First setting: Ring tone  
With the help of the down  
/
up  
keys select the type of function  
where you want to change the ring tone from the proposed list (Alarm,  
Calls, Messages and Local Infos) and accept.  
Enter by pressing the right programmable key  
.
Using the down  
Enter by pressing the right programmable key  
For every new selection, you will hear the corresponding ring.  
/
up  
keys select the ring tone from the list offered.  
.
If required, press the Silent mode key  
to cancel the sound.  
Adjust the volume using the down  
/
up  
keys.  
The volume is adjusted over a scale of 1 to 4.  
The ring tone is played at the chosen level whenever a change is made.  
You can select "+" volume to choose a ring that starts quietly and rises  
to a crescendo.  
Accept by pressing the right programmable key  
.
20  
 
251400892 myX3-2 English.book Page 21 Jeudi, 27. novembre 2003 2:10 14  
Phonebook  
The phonebook allows you to store numbers that you call regularly.  
These numbers can be stored in the SIM card or in the phone.  
Different icons inform you of the position of the phonebook where the  
number is stored:  
The list of numbers in the  
phonebook of the SIM card  
varies in relation to the  
capacity of the card: the  
supplier company will tell you  
what this is.  
Your SIM card phonebook  
Your phone phonebook  
Your SIM card's fixed directory.  
Using the phonebook  
In the home page press the down  
first menu offered is phonebook  
key to access the main menus. The  
corresponding to the accept  
.
Press the right programmable key  
tab to enter the menu.  
The list of your correspondents appears, by default, the cursor is  
positioned on the first name in alphabetical order.  
If you are using your phone and SIM card for the first time, the phonebook  
list will be empty, only the Phonebook Menu function will be available.  
Select a contact from the list using the down  
the right programmable key  
/
up  
keys. Then press  
.
21  
       
251400892 myX3-2 English.book Page 22 Jeudi, 27. novembre 2003 2:10 14  
Phonebook  
You can also enter a letter to access directly the first contact starting with  
this letter.  
If you know the memory number of this contact on the SIM card (say 21  
for example), you can enter 21# directly.  
Choose from the options offered:  
See contact  
The first menu offered is See contact Enter.  
.
The detail of the store appears (location, call group, name, number).  
Modify contact  
Modify contact. Enter. Using the down  
Modify name if required, and Accept  
Modify number if required, and Accept  
key.  
.
.
Modify call group if required, and Accept  
.
Delete  
Select Delete Enter.  
.
Confirm deletion of entry with Yes  
.
Call  
Select Call. Press the right programmable key  
to make the call.  
You can also select the party to be called from the phonebook, and press  
the Start key to make the call.  
Send message  
Select Send message Accept.  
.
Text editor opens automatically.  
22  
     
251400892 myX3-2 English.book Page 23 Jeudi, 27. novembre 2003 2:10 14  
Phonebook  
The phonebook menu allows you to create new contacts, to create call  
groups and to check the memory available to store new contacts.  
Phonebook menu  
In the Phonebook screen, press the right programmable key  
enter the menu.  
to  
Press the up  
key to position the cursor on the Phonebook menu and  
accept  
.
Choose from the options offered add contact, call group, memory, my  
numbers).  
Add contact  
Select Add contact and accept and press the right programmable  
key  
to enter the menu.  
Choose the place where you wish to enter the contact (SIM card or  
phone) using the down up keys, and accept  
Enter name of your correspondent and accept  
Enter phone number and accept  
/
.
.
.
Choose a call group to which you want to allocate this contact and  
accept. (See page 25: Call groups)  
23  
       
251400892 myX3-2 English.book Page 24 Jeudi, 27. novembre 2003 2:10 14  
Phonebook  
Phonebook menu  
Call groups (See page 25)  
Memory  
Select memory and accept  
.
The screen displays the number of free locations on SIM card and in  
phone itself.  
My numbers  
You can create the entries corresponding to your own numbers in order  
to consult them when necessary.  
Select My numbers and accept  
.
Enter the different details and accept  
.
24  
251400892 myX3-2 English.book Page 25 Jeudi, 27. novembre 2003 2:10 14  
Phonebook  
You have the facility to group your contacts into call groups.  
It is possible to allocate characteristics to each group (icon, ring tone,  
vibrate).  
6 default call groups have already been created. You can create others.  
Call groups  
Creating new groups:  
Do same as above to obtain the phonebook menu and accept  
Press down key to position the cursor on Call groups and enter  
By default, the cursor is placed on Call groups menu accept  
.
.
,
.
Choose one of the options offered (Create group or memory available).  
Creating a group  
By default, the cursor is placed on Create group  
,
enter.  
Enter group name and accept  
.
Choose the icon ring tone and vibrate mode that you want to allocate  
,
to this group (accept after each step).  
Memory  
Select memory and OK  
.
The screen displays the number of locations available for new groups.  
25  
 
251400892 myX3-2 English.book Page 26 Jeudi, 27. novembre 2003 2:10 14  
Phonebook  
It is possible to send a vCard from each contact stored in the phonebook.  
The availability of this function depends on the model of your phone.  
Sending a VCARD  
vCards can be sent to another mobile phone using SMS.  
From a contact in the phonebook, select the Send contact by SMS  
option menu item.  
If the vCard is sent successfully, the SMS sending screen is displayed.  
vCards can be sent to another mobile phone using MMS.  
From a contact in the phonebook, select the Send contact by MMS  
option menu item.  
If the vCard is sent successfully, the MMS sending screen is displayed.  
vCards can be sent as an attachment to an MMS message. See  
26  
 
251400892 myX3-2 English.book Page 27 Jeudi, 27. novembre 2003 2:10 14  
Phonebook  
The availability of this function depends on the model of your phone.  
Receiving a vCard  
When a vCard is received in an SMS message, the message “You have  
received 1 message” is displayed.  
View the vCard by opening the SMS from the inbox. Add this contact to  
the phonebook by pressing Softkey 2. A message is displayed to confirm  
the action.  
When a vCard is received in an MMS message, the message “You have  
received 1 message” is displayed.  
Open the MMS from the inbox. Go to Options by pressing Softkey 2, and  
select Extract; select the vCard among the list of objects attached to this  
MMS, and add this contact to the phonebook by pressing Softkey  
message is displayed to confirm the action.  
2. A  
27  
 
251400892 myX3-2 English.book Page 28 Jeudi, 27. novembre 2003 2:10 14  
Messages  
The message menu brings together the following two types of messages:  
SMS and EMS (an EMS is an extended message, longer than an SMS  
with images and sounds added). It is possible to exchange different types  
of contents: text, call group icons, screen backgrounds, tunes, WAP  
bookmarks..  
Composing  
messages  
This menu allows you to compose your messages.  
From the Messages menu select the Compose menu and enter  
.
By default, the language used is the language activated in the phone's  
menu display (or English if a language not supported by Easy Message  
T9™ has been chosen for the menus).  
When typing  
a
text,  
a
counter showing the number of characters  
deducted is displayed at the top of the screen (depending on model). This  
counter is not displayed if an icon or sound is inserted into the SMS.  
When the text has been entered, the right programmable key  
(
choice) can also be used to access the functions offered:  
Send is used to send the message by entering the correspondent's  
number.  
T9 options (see next page)  
ABC mode (see page 30)  
123 mode (see page 30)  
Cancel is used to delete all text entered  
Activate/deactivate zoom is used to modify size of characters  
Store is used to save a draft in memory  
Formatting is used to enrich a text  
Insert to insert an image or sound into your message  
(see page 30).  
This  
menu  
has  
been  
compiled in collaboration with  
28  
         
251400892 myX3-2 English.book Page 29 Jeudi, 27. novembre 2003 2:10 14  
Messages  
The Easy Message T9™ helps you to conveniently enter your short  
messages.  
Messages  
Using T9 Mode  
Press once the key corresponding to the letter chosen and make the  
word by continuing to press the keys corresponding to the various letters  
without paying attention to the display, until you have finished inputting  
the word: it then appears in inverse video.  
If the word offered is what you wanted to enter, press the  
accept it, create a space and move to the next word.  
0
key to  
However, it is possible that several words exist in the corresponding  
dictionary for the same sequence of keys pressed. If the word that  
appears is not the word you expected, press the right programmable  
key  
indicating  
to scroll through the words held in the  
dictionary corresponding to this key sequence.  
When you find the chosen word, press the  
space and move on to the down word.  
0
key to accept it, create a  
Press the right key to simply accept the characters entered without  
creating a space and moving on to another T9 word.  
If the word you are expecting is not proposed, please go on adding  
characters until you get the message “Add a word?”. Select “Yes”, correct  
the word when necessary and press ”OK”.  
29  
     
251400892 myX3-2 English.book Page 30 Jeudi, 27. novembre 2003 2:10 14  
Messages  
In the input screen, the right programmable key  
other input options.  
is used to access  
Input modes  
The ABC mode is used to enter words that do not exist in the dictionary.  
To obtain a letter, press the corresponding key several times, the letters  
and the number scroll past.  
When composing a message:  
The navigation keys assume the  
following functions:  
Mode 123 is used to insert numbers.  
-
-
-
-
-
-
Left key  
:
Last word  
Insert mode is used to insert symbols, animations, call group icons and  
tunes: the SMS then becomes an EMS. Images and sounds can be two  
types: pre-defined or customised. Pre-defined images and sounds are  
smaller in size, especially suited to exchanging messages.  
Right key  
Next word  
Up key  
Previous line  
Down key  
Next line  
Left programmable key  
Deletes last letter  
:
:
Upper case:  
:
A quick touch of the  
key will display the next letter in upper case.  
Two short presses on the  
key allow you to switch to upper case  
:
editing mode for the whole message.  
Right programmable key  
Punctuation characters  
Punctuation characters are obtained with the help of key  
mode), or with the help of Insert mode (fast access via the  
:
1
(except in 123  
Message options  
key).  
-
-
Hold down  
Zoom mode (changes size of  
characters)  
Short press of  
Access to symbol table  
key:  
Accented characters  
Accented characters are generated automatically in T9™ mode.  
In ABC mode accented characters are available by pressing the key  
supporting the non-accented character in succession.  
key:  
30  
         
251400892 myX3-2 English.book Page 31 Jeudi, 27. novembre 2003 2:10 14  
Messages  
This menu allows you to compose your MMS messages.  
Compose MMS  
The availability of this function depends on the model of your phone.  
From the Messages menu choose the Compose menu and Enter.  
Choose MMS from the proposed options (SMS or MMS).  
The functions offered are:  
Subject: the subject of your message goes here.  
To: this option gives access to the phonebook.  
Cc: this option also gives access to the phonebook.  
Body: to enter text and multimedia objects to the message.  
When the text has been entered in the body screen, the right  
programmable key  
functions offered:  
(options) can also be used to access the  
Editor Mode to allow editing and formatting of the text.  
T9 options (see page 29).  
Insert to insert multimedia objects such as images, animations and  
sounds into your message.  
Send Send, Send and receive all, send later.  
Slideshow to compose a slideshow of the multimedia objects.  
31  
   
251400892 myX3-2 English.book Page 32 Jeudi, 27. novembre 2003 2:10 14  
Messages  
Compose MMS  
Saving your message  
You can save your message as a draft by selecting “Save” from the  
options, when editing the Subject or the Body. You will be able to edit it  
later from the “Draft” Menu.  
Sending MMS messages  
You have the choice to activate or deactivate the storing of messages in  
your Outbox after sending. Sagem recommends that messages are not  
stored in your Outbox by default because if too many messages are  
saved, the phone memory will soon become full and no further messages  
will be received.  
Receiving MMS messages  
There are  
2
retrieval options, automatic and manual. The default  
behaviour on the user network is “Automatic Retrieval”. When roaming,  
only the notification of an MMS message is received.  
Select “Manual Retrieval” if you prefer to delay the reception of your MMS  
on the user network as well.  
32  
251400892 myX3-2 English.book Page 33 Jeudi, 27. novembre 2003 2:10 14  
Messages  
The number of messages stored in the SIM card varies depending on the  
card's capacity.  
Receiving messages  
When you receive a message, an audio signal sounds (the one selected  
in the Sounds menu) and the message icon appears on your phone  
screen.  
wed 12 NOV  
If you do not read the messages, this icon remains displayed on the  
screen. When it flashes, the memory is full.  
Receiving icons, backgrounds or tunes can take several seconds.  
Messages inform you of the progress of the download.  
Menu  
You have the facility to do the following at any time:  
-
To mask this progress screen by pressing the left programmable  
key to make a call or access other phone information.  
Or stop the download in progress by pressing the right programmable  
key  
-
.
Consult your network operator on the downloading of icons, backgrounds  
or tunes.  
33  
   
251400892 myX3-2 English.book Page 34 Jeudi, 27. novembre 2003 2:10 14  
Messages  
Received messages are stored in the SIM card or in the phone until you  
choose to delete them.  
Inbox  
From the Messages menu choose the Inbox menu and Select  
.
Each message contains information on type of message (in the form of  
an icon) and time (or date) of reception.  
Unread messages are entered in bold and arranged by arrival time and  
date.  
Select a message and press the right programmable key  
.
Choose from the options offered (Read, Forward, Delete read, reply,  
reply with original message, call, send, delete, delete all).  
If your message contains objects (images or sounds), you can save them  
in order to use them later (stored in your phone's memory); when reading  
text, place the cursor on the object and choose the Save option from the  
options on the right programmable key  
.
When they have been stored in memory, the space required in the phone  
is then indicated.  
You can consult them in the corresponding menus (WAP bookmarks in  
WAP, tune in Sounds, backgrounds in Background, and icons in Call  
groups).  
The Outbox is used to store all your sent and waiting messages.  
Outbox  
If too many messages are saved, the phone memory will soon become  
full and no further messages will be received.  
From the Messages menu choose the Outbox menu and Select.  
Each message contains information on type of message (in the form of  
an icon) and time (or date) of sending.  
Select a message and press the right programmable key  
.
Choose from the proposed options (View, Details, Modify, Read, Send,  
Forward, Delete, Delete all, Delete sent).  
34  
         
251400892 myX3-2 English.book Page 35 Jeudi, 27. novembre 2003 2:10 14  
Messages  
When you store a composed message, it is stored among the drafts.  
Drafts  
From the Messages menu choose the Drafts menu and Select  
.
Select a message and press the right programmable key  
. If you  
do not delete this message, it will remain as a draft and can be re-used  
even if you have already sent it.  
Choose from the options offered (Read, Send, Delete, Delete all, Modify).  
Several sending options are offered.  
Sending options  
From the Messages menu choose the Options menu and Select  
.
Choose from the proposed options (SMS or MMS).  
The proposed SMS send options are: acknowledgement, reply given,  
period of validity (life cycle of message on network before being routed),  
message format, message centre and save msgs sent.  
35  
       
251400892 myX3-2 English.book Page 36 Jeudi, 27. novembre 2003 2:10 14  
Messages  
The proposed MMS options are:  
Store sent msgs: (it is highly recommended that you keep this function  
deactivated, in order to avoid a full memory),  
Retrieval mode (automatic or manual):if you are or in a poor coverage  
area it may be more convenient to choose the manual retrieval mode  
which gives you the retrieve later option.  
this icon  
is arriving  
blinking on the top of the idle screen means that a message  
Default priority: high or low  
MMS ignore: if you want to deactivate the reception of any MMS in your  
phone.  
MMS server: to select another MMS provider, or set the parameters of a  
new MMS provider.  
You may want to know the memory available for saving messages.  
Memory  
From the Messages menu select the Memory option and Select  
.
Choose from the proposed options (SMS or MMS).  
The SMS screen shows you the memory available on the SIM card  
phone and in the phone.  
The MMS screen shows you the amount of memory used in kbytes.  
36  
   
251400892 myX3-2 English.book Page 37 Jeudi, 27. novembre 2003 2:10 14  
Messages  
This menu is used to activate reception of local information broadcast by  
the network.  
Local info  
You can choose whether or not to receive information (ask the company  
with which you took out your subscription).  
From the Messages menu select the Local info. menu and Select  
.
37  
   
251400892 myX3-2 English.book Page 38 Jeudi, 27. novembre 2003 2:10 14  
WAP  
WAP (Wireless Application Protocol): protocol that translates the Internet  
language into WML language that can be read by a phone. The WAP  
function allows you to log onto certain Internet sites. You can log onto  
sites that allow you to download tunes, icons or animated screensavers  
to your phone.  
The WAP Menus  
The WAP navigator is under  
licence:  
The Services menu, a dropdown menu, can be accessed at all times  
when navigating through WAP pages.  
Select the top left icon using the  
up key.  
Consult the menu using the right programmable key  
.
The Services menu contains all the following sub-menus:  
Welcome: logs onto the home page.  
(carries the name of your access provider)  
The WAP navigator is the exclusive  
property of Openwave. For this  
reason, it is forbidden to modify,  
translate, disassemble or even  
decompile all or part of the software  
that makes up the navigator.  
Bookmarks: is used to save in a phonebook the names and addresses  
of Internet sites to facilitate easy access.  
You can receive bookmarks from SMS and add them to this list (see  
chapter on SMS).  
You can also send messages by SMS: select a bookmark, press the  
right programmable key (Choice), then select Send by SMS  
.
You can activate the magnifying  
glass to increase the size of the  
characters by holding down the  
Go to URL: this menu allows you to input an Internet address directly.  
Inbox: this menu allows you to consult messages sent by the Internet  
site.  
Save image: is used to save a WAP site image (option).  
Reload: refreshes the current page.  
# key  
.
Clear the cache: clears the stored information on previous logons.  
38  
       
251400892 myX3-2 English.book Page 39 Jeudi, 27. novembre 2003 2:10 14  
WAP  
Advanced…: offers the following advanced settings  
-
-
-
-
-
Configuring parameters  
Show URL  
Logoff  
Circuit message (if user can confirm each logon)  
Security (is used to access information on making WAP connections  
secure).  
About…: information on the browser.  
Exit: returns to the phone's home page.  
Configuring WAP parameters  
Select the Advanced… menu, then the configuration menu.  
Choose from the sub-menus offered:  
Logon parameters is used to select or modify your access provider's  
logon parameters or configure the parameters of other access providers.  
The active access service is preceded with a start.  
Configuration of WAP and GPRS parameters:  
All information to be entered in the parameters are provided by your  
operator or access provider.  
-
-
Choose desired access service, then press Choice.  
Enter title of service and accept.  
-
-
Enter Internet address of home page and accept.  
Enter parameters of preferred logon:  
GPRS otherwise GSM (by default): the logon to WAP services uses the  
GPRS as a priority. However, in the event of unavailability of the GPRS  
network, the GSM network is used to establish the link.  
GPRS: the logon to WAP services uses the GPRS network exclusively.  
GSM: the logon to WAP services uses the GSM network exclusively.  
39  
     
251400892 myX3-2 English.book Page 40 Jeudi, 27. novembre 2003 2:10 14  
WAP  
The GSM parameters to be entered are:  
-
-
-
-
-
-
User name  
Password  
IP address of WAP gateway  
Port type (secure or insecure)  
Call number  
Access mode (digital, analogue or automatic)  
In automatic mode access can be gained to the operator's network by a  
digital link and by an analogue link to a different network (in roaming).  
The GPRS parameters to be entered are:  
-
-
-
-
-
User name  
Password  
IP address of WAP gateway  
Port type (secure or insecure)  
APN: if no APN has been defined, press the right programmable  
key  
Select or add and APN.  
Once all the settings have been entered, you can activate the chosen  
access provider. Select him from the list. Confirm your choice with OK  
(Choice) then the APN menu.  
.
Inactivity time is used to choose the time after which the call is  
automatically disconnected if you have forgotten to log off from a service.  
WAP Logging on  
Using the Welcome menu, you can log onto your access provider's  
WAP site by pressing the right programmable key  
.
The connection to a WAP service  
on the GPRS network is not cut if  
an incoming call is received. You  
can answer the call.  
If you are logging onto the GSM network, the @ symbol flashes, the  
metering of the cost of the call starts as soon as it stops flashing.  
40  
       
251400892 myX3-2 English.book Page 41 Jeudi, 27. novembre 2003 2:10 14  
WAP  
Downloading objects  
WAP Logging off  
GPRS  
Some WAP sites allow you to download ring tones, icons or animated  
screensavers. Once downloaded, they are stored in your phone's  
memory. You can then save them in your phone (same operation as used  
for downloading using SMS).  
To log off press Stop  
key.  
The logoff happens automatically after a few seconds of inactivity if you  
forget to log off.  
This period is defined by the inactivity time setting.  
A flashing icon indicates that the phone is logging onto a GPRS network.  
A non-flashing icon indicates that the GPRS network is available; if the  
icon is dark, it indicates that the phone is logged onto the GPRS network:  
see page 48 for the attachment options.  
This icon is not displayed if the GPRS network is not available or if the  
SIM card inserted in your phone does not include the GPRS service. It  
may also disappear when accessing WAP services if the connection  
uses the GSM network instead of the GPRS network.  
41  
             
251400892 myX3-2 English.book Page 42 Jeudi, 27. novembre 2003 2:10 14  
Games  
Your phone is supplied with Picture Puzzle. You can also download new  
games depending on your phone and your subscription.  
This optional menu has been developed by the company In-Fusio™.  
Downloaded games  
From the Games menu select the Downloaded ga. menu and press OK  
;
this menu can also be accessed from the idle screen by a long press on  
the  
9
key.  
You can:  
-
Play the downloaded game already present (Wallbreaker).  
Use keys or navigation key to move and to accept or pause.  
Download new games (available from the catalogue)  
Consult the loyalty points acquired during downloads, news, instructions,  
Make settings.  
2,  
4,  
6,  
8
5
-
-
-
42  
     
251400892 myX3-2 English.book Page 43 Jeudi, 27. novembre 2003 2:10 14  
Sounds  
This menu allows you to customise the ring tones on your phone and to  
activate beep and vibrate modes.  
Volume and  
ring tone  
This menu allows you to allocate a ring tone to each type of event.  
From the Sounds menu choose Ring tones menu and Select  
.
Select the type of event from the list offered (Alarm, Calls, Messages  
and Local Infos) and accept  
.
Select the ring tone from the list offered and accept  
Adjust the volume using the down up keys and accept  
You can deactivate the sound by pressing the key  
.
/
.
.
This menu allows you to activate the vibrate mode for calls.  
From the Sounds menu choose the Vibrate menu and Select  
Vibrate  
.
Select the vibrate mode from the choices offered (vibrate only, vibrate  
inactive or vibrate plus ring tone) and accept  
.
43  
             
251400892 myX3-2 English.book Page 44 Jeudi, 27. novembre 2003 2:10 14  
Sounds  
WARNING: vibrate mode is not a priority in relation to the choice of ring  
tones in the call groups. To make vibrate mode apply in general, switch  
to Silent mode.  
This menu allows you to switch to Silent mode.  
Silent mode  
From the Sounds menu select Silent mode and Select  
.
Activate or deactivate Silent mode and accept  
.
Silent mode can also be accessed via the home page by holding down  
the  
key.  
When the device is in silent mode, the relevant icon appears on the  
home page.  
In this mode the ring tone will not function, except for the alarm clock.  
This menu allows you to activate a beep for each type of event.  
Beeps  
From the Sounds menu choose the Beeps menu and Select  
.
Select the type of beep you want to allocate from the choices offered (Key  
beep, Network beep or Battery beep) and accept  
Activate or deactivate the beep and accept  
.
.
In the case of key beeps, you can also choose from the two types of  
beeps offered: key beeps or Dtmf tone (different beep depending on the  
key pressed).  
44  
       
251400892 myX3-2 English.book Page 45 Jeudi, 27. novembre 2003 2:10 14  
Background  
This menu allows you to customise your screen by choosing the colour,  
background image, animation or greeting message.  
This menu allows you to display the colours you want on your phone.  
Colours  
From the Background menu select the Colours menu and Select  
.
Select the colour you want to see during navigation from the menus and  
accept  
.
This menu allows you to display the background image you want on your  
phone.  
Wallpapers  
From the Background menu select the Wallpapers menu and Select  
.
Select the Wallpaper and Visualise  
(
right programmable key  
).  
The image appears in the background of the home page.  
Press the right programmable key  
to select your choice then  
select the option Deactivate if you want to remove the texts displayed on  
the home page in order to display the image entirely (The availability of  
this function depends on the model of your phone).  
45  
           
251400892 myX3-2 English.book Page 46 Jeudi, 27. novembre 2003 2:10 14  
Background  
This menu allows you to display an animation when the phone is in standby  
mode.  
Screensavers  
From the Background menu select the Screensavers menu and  
Select  
.
Select a screensaver from the options offered and accept.  
The chosen screensaver appears on the screen, accept it.  
Adjust the screensaver display time (greater than 60 seconds) and  
accept. The screensaver appears at the end of each period of inactivity.  
Warning: the animated screensaver uses processing power. For a better  
efficiency you can deactivate the screen saver or select the activation  
time to be more than every 300 s.  
This menu allows you to customise your greeting message.  
Greeting message  
From the Background menu select the Greeting msg menu and Select  
.
Enter the text that you want to see appear in the greeting message (when  
you switch on) and accept  
.
46  
         
251400892 myX3-2 English.book Page 47 Jeudi, 27. novembre 2003 2:10 14  
Settings  
This menu allows you to customise the settings of your phone to make it  
as convenient as possible for you to use.  
This menu allows you to set the date and time of your phone.  
Date / Time  
From the Settings menu select the Date / Time menu and Select  
.
Date: set the date by entering it directly in digital form or by using the  
down / up  
keys.  
Use the right key  
(or left ) to access the next (or last) input field.  
Once the date is correct, accept it.  
Time: same procedure as for setting the date.  
This menu allows you to find out how much memory is available for objects.  
My Objects  
From the Settings menu select the My objects menu and Select  
.
The amount of memory available is displayed. This memory is divided  
between your downloaded ring tones, wallpapers and screensavers.  
You can delete your objects to increase the memory available for new  
downloads.  
47  
           
251400892 myX3-2 English.book Page 48 Jeudi, 27. novembre 2003 2:10 14  
Settings  
This menu allows you to choose your phone's display language.  
Languages  
From the Settings menu select the Languages menu and Select  
Select the language of your choice and accept  
.
.
If you select Automatic, the display language will be the language of  
your SIM card.  
This menu allows you to configure network preferences.  
Networks  
From the Settings menu select the Networks menu and Select  
.
Choose Preferred to view all the pre-registered networks.  
Choose Selection to activate (automatically or manually) one of the  
networks accessible in the area in which your are located.  
Choose GPRS to select the way you want to be attached on the GPRS  
network: always, or only when needed (when launching  
connection).  
a
data  
48  
       
251400892 myX3-2 English.book Page 49 Jeudi, 27. novembre 2003 2:10 14  
Settings  
This menu is used to adjust screen contrast.  
Contrast  
From the Settings menu select the Contrast menu and Select  
.
A test screen allows you to adjust the contrast by means of the down / up  
keys and enter  
.
This function is used to deactivate the screen backlight.  
Energy saving  
From the Settings menu select the Energy saving menu and Select  
.
Activate or deactivate the backlight and accept  
.
By deactivating the screen backlight you increase the battery life of your  
phone.  
WARNING: display legibility is reduced.  
49  
       
251400892 myX3-2 English.book Page 50 Jeudi, 27. novembre 2003 2:10 14  
Settings  
Depending on model, only one programmable key is available.  
Short cuts  
From the Settings menu select the Short cuts menu and Select  
.
Select the key that you wish to modify and accept  
.
Choose the function that you want to allocate to this key and accept  
.
50  
   
251400892 myX3-2 English.book Page 51 Jeudi, 27. novembre 2003 2:10 14  
Calls  
The Calls menu allows you to manage and consult all your phone's  
incoming and outgoing calls that are marked as follows:  
Incoming call  
Outgoing call  
Fast access to the list of calls from the home page: press the Start  
key.  
This menu allows you to transfer calls addressed to you.  
Forward calls  
Depending on your subscription, this service allows you to re-direct  
incoming calls to a different number or answer phonebox.  
From the Calls menu select the Calls forwarded menu and Select  
.
Choose the type of forwarding you want from the options available.  
This menu allows you to access the list of last numbers used.  
View last calls  
From the Calls menu select the View last calls menu and Select  
.
Each call contains information on type of call (in the form of an icon), time  
(or date) and duration.  
Select a call from the list and accept  
.
Choose from the options offered (Call, store in your phonebook, send a  
message, delete, delete all).  
You can also make the call by pressing the Start  
key.  
51  
           
251400892 myX3-2 English.book Page 52 Jeudi, 27. novembre 2003 2:10 14  
Calls  
This menu allows you to consult the duration of the outgoing calls.  
Counters  
It can also be used to consult the volume of data last exchanged in  
GPRS.  
From the Calls menu select the Counters menu and Select  
.
Choose the type of counter you want from the options offered.  
This menu allows you to modify the status of the display number function.  
Display numbers  
From the Calls menu select the Display numbers menu and Select  
.
Choose from the options offered (Anonymous mode, My number, Caller’s  
number).  
Anonymous mode  
You have the facility to mask your number on the phone from the person  
you are calling.  
Initial: network default mode.  
No: you choose not to activate anonymous mode and so to display your  
number.  
Yes: you choose to active anonymous mode and so not to display your  
number.  
52  
         
251400892 myX3-2 English.book Page 53 Jeudi, 27. novembre 2003 2:10 14  
Calls  
During a call you may be informed that a caller is trying to reach you: you  
hear a special tone. The caller's number is displayed on the screen (or  
the caller's name if it has been stored).  
(Operator-dependent service)  
Call waiting  
From the Calls menu select the Call waiting menu and Select  
.
You can activate, deactivate, or consult the status of the call waiting  
service in order to check if it is active or not.  
During a call, if a second caller tries to contact you, the screen displays  
the call warning.  
This menu allows you to call back a person you tried to reach.  
Automatic redial  
From the Calls menu select the Auto redial menu and Select  
.
You can set the redial function to inactive, on demand or systematic.  
If you choose On demand, your phone will offer to redial your caller  
automatically if the number is busy.  
53  
       
251400892 myX3-2 English.book Page 54 Jeudi, 27. novembre 2003 2:10 14  
Calls  
The blacklist is used to limit failures on automatic calls (calls generated by  
the automatic redial function or by applications: data, fax for example).  
Blacklist  
From the Calls menu select the Blacklist menu and Select  
.
When several automatic calls failed with a number (number busy or  
unknown), this number is put in the blacklist and no automatic call will be  
done with this number any more until you delete it from the blacklist.  
Note: this function does not apply to the calls performed manually.  
Answer phone  
number  
This function is used to set your answer phone number.  
This number will be used when you make a call from the answer  
phonebox using the programmable keys.  
From the Calls menu select the Answ. phone nb. menu and Select  
.
Enter your answer phone number and accept  
.
54  
     
251400892 myX3-2 English.book Page 55 Jeudi, 27. novembre 2003 2:10 14  
Security  
This menu allows you to configure your phone's security settings.  
This menu allows you to lock the keypad.  
Keypad locking  
From the Security menu select the Keypad locking menu and Select  
.
Select Activate or deactivate and accept  
The lock icon appears on the home page.  
This function is also available in the home page via a combination of the  
.
and Select keys (right programmable key ).  
This menu allows you to activate and modify the PIN number/code of your  
SIM card.  
PIN number  
From the Security menu select the PIN number menu and Select  
.
To modify the PIN, select Modify and Select  
.
Enter old PIN and accept  
.
Enter new PIN twice and accept  
.
To activate or deactivate the PIN, select the Check PIN menu and  
Select  
Enter PIN and accept  
Select Activate or Deactivate and accept  
.
.
.
55  
         
251400892 myX3-2 English.book Page 56 Jeudi, 27. novembre 2003 2:10 14  
Security  
The Phone code menu allows you to activate the phone code so that it  
is requested and checked whenever the phone is switched on if a  
different SIM card is used. This code is automatically linked to the SIM  
card installed when the phone is activated.  
You have a second PIN number to allow you to access certain functions*.  
* This function may or may not be available depending on your SIM card.  
PIN number 2  
Proceed as above in order to activate, deactivate or modify the PIN  
number 2 of your SIM card .  
The phone code is a secret code intended to protect the phone if stolen.  
Phone code  
To activate or deactivate the phone code, select the Phone code menu  
and accept  
Enter 0000 and accept  
Select Activate or Deactivate and accept  
.
.
.
To modify the phone code, select Modify and accept  
Enter old phone code and accept  
Enter new phone code and accept  
Enter phone code again to verify it and accept  
.
.
.
.
56  
       
251400892 myX3-2 English.book Page 57 Jeudi, 27. novembre 2003 2:10 14  
Security  
The Confidentiality function is used to delete numbers stored in View  
last calls and the SMS stored in the memory when a new SIM card is  
inserted into the phone.  
Confidentiality  
From the Security menu, select the Confidentiality menu and Select  
.
Select Activate or Deactivate and accept  
.
This menu allows you to modify the call barring.  
Operator code  
From the Security menu, select the Operator menu and Select  
.
Access to this service depends on your type of subscription.  
57  
       
251400892 myX3-2 English.book Page 58 Jeudi, 27. novembre 2003 2:10 14  
Security  
Call barring can be applied to ALL calls (incoming and outgoing), to all  
incoming calls when you are away from your home country (if roaming  
available).  
This menu allows you to block the sending or reception of certain calls.  
Call barring  
Before you can use this service, a password will be provided by your  
operator when you take out your subscription.  
From the Security menu, select the Call barring menu and Select  
.
Select Activate or Deactivate and accept  
.
Access to this service depends on your subscription type.  
This menu allows you to restrict the sending of calls.  
Fixed dialling  
From the Security menu, select the Fixed dialling menu and Select  
.
Enter PIN number 2 and accept  
.
Select Activate or Deactivate and accept  
.
Proceed as for any other phonebook.  
By activating this function, you can send calls only to the numbers stored  
in this phonebook.  
This phonebook is linked to the SIM card, and its size depends on the  
card's capacity.  
58  
           
251400892 myX3-2 English.book Page 59 Jeudi, 27. novembre 2003 2:10 14  
Security  
This menu allows you to control the cost of your calls (*)  
(depending on model).  
Costs  
From the Security menu, select the Costs menu and Select  
.
This menu enables you to check the cost of the last call you have made:  
you can also check the cost of all the calls made since you have reset the  
durations (Menu Counters/Duration/Delete Duration  
)
The Delete costs menu enables you to delete the cost of the last call.  
You can also reset the counters, after entering your PIN 2 code.  
(*) WARNING  
Depending on how the networks and the SIM cards are configured, some  
functions may not be available (shown by *).  
59  
   
251400892 myX3-2 English.book Page 60 Jeudi, 27. novembre 2003 2:10 14  
Accessories  
This menu allows you to access the various accessories offered by your  
phone: calculator, converter, alarm, timer, car kit, data parameters.  
This menu allows you to use your phone as a calculator.  
Calculator  
From the Accessories menu, select the Calculator menu and Select  
You can use the calculator with the help of the following keys:  
Up key: Add  
.
Down key: Subtract  
Right key: Multiply  
Left key: Divide  
Right programmable key: Equals  
Left programmable key: Delete  
key or #: Decimal point.  
If no calculations are being run, the right programmable key  
allows you to use the value in the converter directly.  
60  
       
251400892 myX3-2 English.book Page 61 Jeudi, 27. novembre 2003 2:10 14  
Accessories  
This menu allows you to convert one currency to another .  
Converter  
From the Accessories menu, select the Converter menu and Select  
.
Enter a value and press the Up key  
to convert from one currency to  
another, or the Down key  
to convert back.  
The right programmable key  
options:  
allows you to use the following  
Rapid exchange  
The converter will work in the home page by entering the desired  
numbers and pressing the down / up  
conversion.  
keys to make the  
Exchange rate  
Enter the rate of exchange corresponding to the chosen currencies.  
Currencies  
Enter the two types of currencies to be converted.  
Go to calculator  
This option allows you to immediately use the value converted in  
the calculator  
.
61  
     
251400892 myX3-2 English.book Page 62 Jeudi, 27. novembre 2003 2:10 14  
Accessories  
The alarm works even when the phone is switched off.  
This menu allows you to set and activate the alarm.  
Alarm  
From the Accessories menu, select the Alarm menu and Select  
.
Activate or Deactivate the alarm and accept  
.
Set the waking time by entering the numbers directly or using the  
down / up keys and accept  
.
The alarm icon appears on the home page.  
This menu is used to set and activate the timer.  
Timer  
From the Accessories menu, select the Timer menu and Select  
.
Activate or Deactivate the alarm and accept  
.
Set the duration by entering the numbers directly or using the down / up  
keys and accept  
.
The alarm icon appears on the home page.  
62  
       
251400892 myX3-2 English.book Page 63 Jeudi, 27. novembre 2003 2:10 14  
Accessories  
This menu allows you to configure your phone with a car kit.  
Car kit  
From the Accessories menu, select the Car kit menu and Select  
.
Choose from the options offered (Automatic response, Switch off, Alarm  
timing, Hands-free volume control).  
This menu is used to configure the data exchange with  
Computer.  
a
Personal  
Data  
From the Accessories menu, select the Data parameters menu and  
Enter  
.
Choose the correct speed depending on the Personal computer you  
would like to connect to the handset.  
If there is a modem embedded in your phone, you can connect it to your  
computer in order to receive data or fax through GSM or GPRS network:  
configure the connection parameters of your computer using the  
Wellphone CD supplied as an accessory.  
63  
       
251400892 myX3-2 English.book Page 64 Jeudi, 27. novembre 2003 2:10 14  
Services  
This menu allows you to access numerous services offered by your  
operator. The list of these services will appear in the menu depending on  
your subscription.  
This menu allows you to access your operator's basic services.  
Services  
From the Services menu, choose from the list offered.  
64  
   
251400892 myX3-2 English.book Page 65 Jeudi, 27. novembre 2003 2:10 14  
Technical features  
Use of your phone is subject to safety measures designed to protect users and their environment.  
Electrical safety  
Only use those chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also  
invalidate your warranty. Line voltage must be the same as that indicated on the charger’s serial plate.  
Aircraft safety  
You must switch off your phone on aeroplanes when so instructed either by cabin crew or by signs. Mobile phone use may be  
dangerous to the operation of the aircraft and may disrupt the phone network.  
Explosive materials  
Please comply with signs at petrol stations telling you to switch off your phone. You must also observe radio equipment usage  
restrictions in chemical plants, fuel depots and at any location where blasting operations are under way.  
Electronic medical equipment  
Your phone is a radio transmitter which may interfere with electronic medical equipment such as hearing aids, pacemakers, etc.  
Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this area. Always make  
sure that your phone is switched off in hospitals when so instructed by signs or by medical staff.  
Road safety  
Except in emergencies, do not use your phone when driving unless you have a hands-free kit enabling you to manoeuvre freely.  
In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current  
legislation.  
This mobile phone complies with European requirements governing exposure to radio waves.  
Your phone is a transmitter/receiver. It has been designed and manufactured to comply with radiofrequency energy exposure  
limits recommended by the Council of the European Union and the ICNIRP for the entire population. These limits were  
established by independent scientific agencies on the basis of in-depth and regular evaluations of scientific studies. The limits  
include a large safety margin that is intended to guarantee the safety of all, irrespective of age or state of health.  
The exposure standard for mobile phones uses a unit of measure called the SAR, or Specific Absorption Ratio. The SAR limit  
recommended by the Council of the European Union and the ICNIRP is 2 W/kg(*). Tests were conducted on a standardised  
usage position basis, with the phone transmitting at its maximum level certified in all its frequency bands. Although the  
standardised measurement is done at maximum power, the real SAR of the phone in use is generally very far below the  
maximum value. The phone was designed to operate at the power level strictly necessary to ensure communication with the  
network. In general, the closer you are to a base station, the lower the power at which the phone will transmit.  
(*) The SAR limit for phones used by the general public is 2 watts/kilogram (2 W/kg) on average for 10 g of tissue. This value  
includes a large safety margin to increase protection and to take account of the variations in measurements. The SAR  
information may vary in different parts of the world, depending on declared national requirements and the frequency  
bands used by the network.  
65  
   
251400892 myX3-2 English.book Page 66 Jeudi, 27. novembre 2003 2:10 14  
Technical features  
Validation of conformity with European directive 1999/5 (directive R&TTE) is a pre-requisite for introducing any model of phone  
onto the market. Protection of health and the safety of the public and the user are a vital requirement of this directive.  
This model's maximum SAR value measured in the conformity test is 0.64 W/kg.  
Although differences may exist from one phone to the other and depending on position, all comply with European regulations.  
Advice for limiting exposure to radiofrequency (RF) fields  
For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the  
following advice:  
Precautionary measures: Individuals: Present scientific information does not indicate the need for any special precautions for  
the use of mobile phones. If individuals are concerned, they might choose to limit their own or their children’s’ RF exposure by  
limiting the length of calls, or using "hands-free" devices to keep mobile phones away from the head and body.  
193: June 2000.  
66  
251400892 myX3-2 English.book Page 67 Jeudi, 27. novembre 2003 2:10 14  
Warranties  
Usage precautions  
Your mobile phone allows you to download ring tones, icons and animated screensavers. Some of these items may contain  
data that may cause malfunctions of your mobile phone or data losses (virus for example).  
For this reason, Sagem rejects all responsibility concerning (1) the reception of downloaded data or losses of the said data, (2)  
the impact on the operation of the mobile phone and (3) damages resulting from receiving the said downloaded data or loss of  
said data. In addition, Sagem states that a failure caused by receiving downloaded data that do not comply with the  
specifications set by Sagem is excluded from the warranty. Consequently, the diagnosis and repair of a phone infected by the  
said downloaded data will be at the expense of the customer.  
Warranty conditions  
Whenever you wish to make use of the warranty, please contact your vendor and present him with the purchasing paperwork that he  
gave you.  
If a fault occurs, he will advise you.  
If you bought your phone directly from SAGEM SA, the following rules will apply:  
1.  
The new equipment (excluding consumables), including new accessories bundled with the phone, are guaranteed by SAGEM  
SA, parts and labour (apart from travel) against any manufacturing fault for a period of twelve (12) months with effect from the  
sale of the equipment by SAGEM SA to the customer, on presentation of the paperwork stating the purchase date of the  
equipment.  
Equipment that has been repaired or replaced as standard during the warranty period stated above is guaranteed (parts and  
labour) until the later of these two dates:  
Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the support provided by  
SAGEM SA.  
In any disputes, the equipment is covered by the legal warranty against the consequences of faults or hidden defects in  
compliance with articles 1641 and subsequent of the French civil code.  
2.  
All faulty equipment under warranty will be replaced or repaired free of charge at SAGEM SA's option (with the exclusion of  
repair of any other damage), once it has been specified that the work required for the application of the warranty will be done in  
a workshop and that the return costs (transport and insurance) of the equipment to the address to be indicated to it by the  
SAGEM SA after-sales service, whose phone number will appear on the delivery note, will be charged to the customer.  
Subject to essential legal provisions, SAGEM SA does not accept any warranty, explicit or implicit, other than the warranty  
provided expressly in this chapter, nor shall SAGEM SA accept responsibility for any immaterial and/or indirect damages (such  
as loss of orders, loss of profit or any other financial or commercial damage) under the warranty or not.  
3.  
The acceptance of an item of equipment under warranty demands that a purchase document that is legible and without modi-  
fication, stating vendor's name and address, date and place of purchase, type of equipment and IMEI, are attached to the  
warranty, and that the information on the equipment identification label is legible and that this label or any other seal has not  
been tampered with.  
The warranty applies in normal conditions of use.  
67  
   
251400892 myX3-2 English.book Page 68 Jeudi, 27. novembre 2003 2:10 14  
Warranties  
Prior to sending the equipment for repair, it is the customer's responsibility to backup at his expense the customised data stored  
in the equipment (phonebook, settings, wallpapers). A list of backup facilities can be provided by SAGEM SA on request. The  
responsibility of SAGEM SA cannot be invoked if damage occurs to customer files, programs or data. The information or  
operating elements and the contents of files will not be re-installed in any case in the event of loss.  
SAGEM SA may decide, at its option, to repair the equipment with new or reconditioned parts, replace the equipment with new  
equipment or, in any dispute, equipment in good working condition. During its work SAGEM SA reserves the facility to make,  
where necessary, any technical modifications to the equipment where these modifications do not adversely affect its initial  
purpose.  
Faulty parts to be replaced during a repair under warranty will become the property of SAGEM SA.  
The equipment repair and standstill time during the warranty period may not lead to an extension of the warranty period as stated  
in article 1 above, provided no other vital provisions have been agreed.  
The application of the warranty is subject to the full payment of the sums due for the equipment when the request for support is  
made.  
4.  
The following are excluded from the warranty:  
Breakdowns or malfunctions due to non-compliance with the installation and use instructions, to an external cause of the  
equipment (shock, lightning, fire, vandalism, malice, water damage of any type, contact with various liquids or any harmful  
agent, unsuitable electric current...), to modifications of the equipment made without the written consent of SAGEM SA, to a  
servicing fault, as described in the documentation supplied with the equipment, to lack of supervision or care, to poor  
environmental conditions of the equipment (especially temperature and hygrometry, effects of variations in electric voltage,  
interference from the mains network or earth) or even due to a repair, a call-out (opening or trying to open the equipment) or to  
servicing done by personnel not approved by SAGEM SA.  
Damage resulting from inadequate packaging and/or poor packing of the equipment sent back to SAGEM SA.  
Normal wear and tear of equipment and accessories.  
Communication problems linked with a poor environment, especially:  
Problems accessing and/or logging onto the Internet, such as breakdowns of the access network, the failure of the subscriber's  
or his correspondent's line, transmission fault (poor geographic coverage by radio transmitters, interference, disturbance, fai-  
lure or poor quality of phone lines...), a fault inherent to the local network (cabling, file server, user terminal) and/or transmission  
network fault (interference, disturbance, failure or poor quality of the network...).  
Change of parameters of the cellular network made after the equipment was sold.  
Supply of new software versions.  
Current servicing work: delivery of consumables, installation or replacement of these consumables...  
Call-outs for equipment or software modified or added without the written consent of SAGEM SA.  
Faults or disruptions resulting from the use of products or accessories not compatible with the equipment.  
Items of equipment returned to SAGEM SA without having complied with the return procedure specific to the equipment covered  
by this warranty.  
The opening or closing of a SIM operator key and call-outs resulting in the non-operation of the equipment resulting from the  
opening or closing of SIM operator key done without the agreement of the original operator.  
68  
251400892 myX3-2 English.book Page 69 Jeudi, 27. novembre 2003 2:10 14  
Warranties  
5.  
In the cases of warranty exclusion and of expiry of the warranty period, SAGEM SA shall draw up an estimate to be given to the  
customer for acceptance before any call-out. The repair and carriage costs (there and back) given in the accepted estimate will  
be charged to the customer.  
These provisions are valid unless a special written agreement has been made with the customer, and shall apply in mainland  
France. If one of the provisions turns out to infringe a legally essential rule that consumers could have the benefit of under the  
national legislation, this provision will not be applied, but all other provisions will remain valid.  
69  
251400892 myX3-2 English.book Page 70 Jeudi, 27. novembre 2003 2:10 14  
Troubleshooting  
PROBLEM - SITUATION  
Impossible to start phone  
ACTIONS  
(3 s).  
Hold down the Start key  
Charge the phone up for 15 minutes before starting it again.  
Check the battery change icon scrolls.  
Yes: charge correct.  
No: disconnect the charger, then reconnect it, check that the battery icon  
scrolls. Press the right programmable key "Start".  
If the icon continues not to scroll, repeat the disconnect and connect  
operation several times. If the battery still does not charge, contact the after-  
sales service.  
When the charge battery icon has stopped flashing, the battery is charged.  
BATTERY STATE UNKNOWN  
message  
The battery has not been recognised by the phone. Check that the battery is  
correctly installed in the phone.  
LOW BATTERY message  
This message is displayed when the battery becomes too weak. The phone  
switches itself off automatically. Put the phone on charge.  
SIM MISSING message  
Check SIM card is present and properly installed.  
Visually check the SIM card. If the card is damaged, contact the operator's point  
of sale to check. If the message continues, contact the after-sales service.  
PIN INCORRECT Message  
SIM BLOCKED  
PIN keying error. Caution: after three attempts, the SIM card is locked.  
You have entered three incorrect PIN codes.  
You will need to enter your PUK code to unblock your SIM Card.  
You must enter: **05*PUK*PIN*PIN#  
You must enter the PUK code (Personal Unblocking Key) given by your  
network provider.  
10 errors will permanently block your SIM Card. You must then contact your  
network provider to get a new one.  
SIM LOCKED  
On network providers' request, the handset can only be used with some types of  
SIM cards. This message means that the SIM card you are using does not fit  
with the phone. Take the SIM card out, and switch the phone back on. If the  
message "SIM not present" appears on the screen, you will need to check its  
compatibility next to the place where you bought it. If not, please contact your  
Customer Services.  
70  
   
251400892 myX3-2 English.book Page 71 Jeudi, 27. novembre 2003 2:10 14  
Troubleshooting  
PROBLEM - SITUATION  
No call connection  
ACTIONS  
Check the called number. Check that at least one signal strength bar is  
present. If the R icon appears without any operator name being displayed,  
only emergency calls are possible.  
Check that your call credit with your operator has not been used up.  
Check that the SIM card used offers the service that you are requesting and  
that its validity has not expired.  
Check and deactivate the restriction on outgoing calls if necessary.  
The network is overloaded. Call again later.  
If the poor call connection persists, contact the hotline.  
No call reception  
Try to make a call to check that the phone and the network are operational.  
Check and deactivate the permanent calls forwarded (permanent calls  
forwarded icon displayed). Check and deactivate the restriction on incoming  
calls if necessary. If the poor reception persists, contact the hotline.  
Network reception less good  
during a call  
Avoid holding the phone with your fingers at the top of the rear cover; this  
creates an obstacle for the antenna located at this spot.  
Impossible to send message  
Check that the SIM card used offers this service. Try to make a call to check  
that phone and network are operational.  
Check that the message centre number is correctly configured. To do so,  
please select go to the Messages menu, select Options, select SMS, select  
Message centre number and check the number entered. Please contact  
your network provider to get that number.  
No answer phonebox  
Check that the SIM card does offer this service.  
Programme the call to be forwarded to answer phoneusing the information  
provided by the operator.  
Answer phone icon flashing  
Backlight does not work  
Call the answer phone to make it disappear.  
Go into the Settings menu, select the Energy saving menu and activate  
backlight  
In WAP context:  
Switch off and then switch phone back on.  
SERVER NOT ANSWERING  
message  
Logon to home page impossible  
In the WAP menu, Clear the cache.  
Operator name does not appear on Go into the Settings menu, select Networks, then Selection. Wait until the  
screen  
operator appears, select it and accept.  
Hit key, then the right programmable key  
How do I (un)lock the keypad?  
(OK).  
71  
251400892 myX3-2 English.book Page 72 Jeudi, 27. novembre 2003 2:10 14  
Troubleshooting  
PROBLEM - SITUATION  
How do I switch to silent mode?  
How do I activate zoom?  
ACTIONS  
Hold  
key down unless ring tone sounds, when a short touch is enough.  
Can be activated only in SMS and WAP screens; hold down  
key.  
How do I remove the envelop that This envelop means that you have written or answer phone.  
appears on the screen?  
To remove it, all you need to do is enter the "Messages" menu to read your  
messages. The envelop is then deleted.  
In the case of a voice message, contact your answer phonebox and let it  
guide you.  
How do I lift the receiver that  
appears on the screen?  
This receiver means that you have received answer phone in your message  
box. To remove it, call your answer phone.  
How do I remove the written  
message at the down of the home  
page (1 call)  
Press the Stop  
key to return to the home page without messages.  
How do I download ring tones?  
Logon to one of the following site via your computer:  
the form of an SMS. You can also logon to your operator's site. Once the  
SMS has been received, all you have to do is save it: accept the option  
"Save messages", the tune will then be added to your list. In addition, you  
can logon to some sites by phone.  
How do I free up memory to  
download my objects (sounds,  
images)  
Go into the Settings menu, select My objects then delete some objects (too  
many).  
How can I increase the efficiency of The most efficient actions are as follows:  
my phone?  
You can deactivate the backlight (in the menu Settings/Energy saving) or  
be carefully where you keep your phone to make sure that the keys can’t be  
pressed accidentally because any key press will activate the backlight.  
You can deactivate the screensaver or select the activation time to be more  
than every 300s (the screensaver uses processing power).  
Make sure that you don’t obstruct the antenna with your fingers when using  
the phone (see page 14).  
No text on the home page (network Go to the Background/Wallpapers menus and select the option Activate in  
name, menu)  
Normal screen.  
72  
251400892 myX3-2 English.book Page 73 Jeudi, 27. novembre 2003 2:10 14  
Index  
Contact  
Add contact  
Delete contact  
Modify contact  
See contact  
Contrast  
Converter  
Costs  
A
Accessories  
Accessories (menu)  
Activating your phone  
Activating your telephone  
Adapter  
Alarm  
Anonymous mode  
Answer phone number  
Currencies  
D
B
Data  
Background  
Battery  
Data and time  
Date and time  
Description  
Charging the battery  
Installing the battery  
Beeps  
E
Emergency services  
EMS  
C
Calculator  
Energy saving  
Call barring  
Call groups  
Calls  
F
Fixed dialling  
Emergency services  
First call  
G
Receiving a call  
CALLS (menu)  
Automatic redial  
Call waiting  
Calls forwarded  
Counters  
Display numbers  
View last calls  
Car kit  
Games  
GPRS  
Greeting msg  
H
Hands-free mode  
Home page  
I
Changing cover  
Charger  
Colours  
Icon  
Input modes  
International  
IP address  
Confidentiality  
73  
 
251400892 myX3-2 English.book Page 74 Jeudi, 27. novembre 2003 2:10 14  
Index  
K
S
Keypad locking  
Screensavers  
Security  
L
Send options  
Services  
Settings  
Short cut keys  
Shortcut keys  
Silent mode  
SIM (card)  
SIM card  
SMS  
Languages  
Local info  
M
Memory  
Menus  
Messages  
Compose  
Drafts  
Sounds  
Switching off  
Inbox  
Sending options  
T
N
T9  
Network  
Networks  
Technical features  
Text  
Timer  
O
Troubleshooting  
Objects  
Operator code  
Outbox  
V
Vibrate  
Volume  
P
Phone code  
W
Phonebook  
Wallpapers  
Phonebook Menu  
Using the phonebook  
PIN number  
PIN number 2  
Principles of navigation  
Programmable keys  
PUK code  
WAP  
Configuring WAP parameters  
Downloading objects  
Services menu  
WAP logging off  
WAP logging on  
Warranties  
R
Y
Receiving messages  
Ring tones  
Your phone package  
74  
251400892 myX3-2 English.book Page 75 Jeudi, 27. novembre 2003 2:10 14  
251400892 myX3-2 English.book Page 76 Jeudi, 27. novembre 2003 2:10 14  

Sylvania SCR1384 User Manual
Sony PEG NZ90 User Manual
Sony MSH 64 User Manual
Sony HBH 60 User Manual
Seagate BlackArmor WS 110 User Manual
Seagate BARRACUDA 18LP FC ST39175FC User Manual
Samsung SGH L700 User Manual
Saitek Game Clock User Manual
Philips AZ8052 User Manual
Panasonic CQ DPG550 User Manual