4-670-644-31
Checking the package contents
Sony CLIÉ handheld components
1
2
3
™
Charging your Sony
CLIÉ™ handheld
Performing the initial
settings
Basic operations of your
Sony CLIÉ handheld
Read
This
™
4
5
6
Taking images/movies
First
™
Using your CLIÉ handheld
Operating Instructions
with your computer
Enjoying your CLIÉ™
handheld
Using applications
Personal Entertainment Organizer
PEG-NZ90
© 2003 Sony Corporation
Refer to the following together with this manual.
Handbook (A PDF file in the CD-ROM)
• When using CLIÉ handheld for the first time
The basic features and operations are explained in detail.
• CLIÉ handheld advanced operations
The convenient features and how to make full use of your CLIÉ handheld are
explained in detail.
computer)
The manual explains about how to use the supplied applications in detail.
For details on using the manual, refer to “Using CLIÉ Application Manual” on page
85 in this manual.
Troubleshooting Q&A
The manual helps in solving problems that you may face while using your CLIÉ
handheld.
Getting Started booklet and Setup poster
Please read these documents at the beginning. They explain how to set up your
handheld for first use.
3
CAUTION
Please contact your nearest Sony dealer regarding
any problems you are experiencing with your
Sony product.
WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture. To avoid electrical
shock, do not open the cabinet.
Refer servicing to qualified
personnel only.
Notes
• Sony does not support third-party add-on
applications. If you are having a problem
with a third-party application, please contact
the developer or publisher of that software.
• The illustrations in this manual may differ
from the actual software.
Owner’s Record
• Explanations in this manual assume that you
are familiar with basic operations of
Windows®. For how to use your computer
and operating system, please refer to their
respective manuals.
The model number and serial number are
located on the back of the product. Record the
model number and the serial number in the space
provided below. Refer to them whenever you call
upon your Sony dealer regarding this product.
Before using your CLIÉ handheld, be sure to read
the accompanying End-User’s License
Agreement.
Model No._____________
Serial No.______________
Sony, CLIÉ, “Memory Stick”, “MagicGate
Memory Stick”, Jog Dial, PictureGear Studio and
their logos are trademarks of Sony Corporation.
Palm OS, Graffiti and HotSync are registered
trademarks of Palm, Inc. and its subsidiaries, and
Palm, Palm Powered, Palm Desktop, the Palm
logo, the Palm Powered logo, the HotSync logo
and Palm OS5 logo are trademarks of Palm, Inc
and its subsidiaries.
Microsoft and Windows are registered trademarks
of Microsoft Corporation.
Pentium is a registered trademark of Intel
Corporation.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
IN NO EVENT SHALL SONY BE LIABLE FOR
ANY INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OR OTHER
DAMAGES INCLUDING WITHOUT
LIMITATION LOSS OF PROFITS, LOSS OF
REVENUE, LOSS OF DATA, LOSS OF USE OF
THE PRODUCT OR ANY ASSOCIATED
EQUIPMENT, DOWNTIME, AND
PURCHASER’S TIME RELATED TO OR
ARISING OUT OF THE USE OF THIS PRODUCT,
ITS HARDWARE AND/OR ITS SOFTWARE.
Pumatech, the Pumatech logo, IntelliSync and
IntelliSync Lite are trademarks of Pumatech, Inc.,
that may be registered in some jurisdictions.
Adobe and Acrobat are trademarks of Adobe
Systems Incorporated.
Bluetooth is a trademark that is owned by the
proprietor and used by Sony under license.
QuickTime and the QuickTime logo are
trademarks of Apple Computer, Inc.
On the supplied oftware
• Copyright laws prohibit reproducing the
software or the software manual in whole or
in part or renting the software without the
permission of the copyright holder.
• In no event will SONY be liable for any
financial damage or loss of profits, including
claims made by third parties, arising out of
the use of the software supplied with this
product.
NetFront is a trademark of ACCESS CO, Ltd.
Picsel and the Picsel logo are trademarks of Picsel
Technologies, Ltd.
• In the event a problem occurs with this
software as a result of defective
Contains Macromedia® Flash™ Player
technology by Macromedia, Inc.,
Copyright © 1995-2001 Macromedia, Inc. All
rights reserved.
manufacturing, SONY will replace it at
SONY’s option or issue a refund. However,
SONY bears no other responsibility.
• The software provided with this product
cannot be used with equipment other than
that which it is designated for use with.
• Please note that, due to continued efforts to
improve quality, the software specifications
may be changed without notice.
Macromedia, Flash and Macromedia Flash are
trademarks or registered trademarks of
Macromedia, Inc. in the United States and
internationally.
This product includes fonts owned by TypeBank
Co., Ltd. under license.
• The software library incorporated in CLIÉ
handheld is based in part on the work of the
Independent JPEG Group.
CompactFlash is a U.S. registered trademark of
SanDisk Corporation.
Program © 2003 Sony Corporation, © 2003 Palm,
Inc., or its subsidiaries. All rights reserved.
Documentation © 2003 Sony Corporation
All other trademarks are trademarks of their
respective owners.
4
WARNING
• The Bluetooth™ function equipped with CLIÉ handheld is valid
only in those countries where CLIÉ handheld is sold.
• In some situations or environments, the use of the Bluetooth™ technology
might be restricted by the proprietor of the building or responsible
representatives of the organization, for example on board of airplanes, in
hospitals or in any other environment where the risk of interference with
other devices or services is perceived or identified as harmful.
• If you are uncertain about the policy applying to the use of Bluetooth™
technology in a specific organization or environment, you are encouraged to
• Consult your physician or the manufacturer of personal medical devices
(pacemakers, hearing aids, etc.) regarding any restrictions on the use of
Bluetooth™ technology.
• To disable the Bluetooth™ function, turn off your CLIÉ handheld
(page 30).
How to remove the Battery Pack
(Lithium-Ion battery)
Follow “Inserting/Replacing the battery” (page 18) to remove the battery.
How to remove a rechargeable button battery
1
2
Remove the screw from the side
of your CLIÉ handheld with a
Phillips screwdriver.
Remove the battery cover.
3
4
Pull the ribbon attached to the
button battery.
Pull the button battery and
disconnect it from your CLIÉ
handheld.
5
Table of Contents
Viewing/Playing back files
Checking the package contents
Using your CLIÉ™ handheld
Sony CLIÉ™ handheld
components. . . . . . . . . . . . 11
computer. . . . . . . . . . . . . . . . . . 64
Locating the parts of your Sony CLIÉ
Step 2: Connect the cradle to your
Changing the operating style . . . . . . 14
computer. . . . . . . . . . . . . . . . . . 67
handheld. . . . . . . . . . . . . . . . . . 68
Locating the controls on the supplied
handheld and computer
®
Charging your Sony CLIÉ™
handheld. . . . . . . . . . . . . . 18
Enjoying your CLIÉ™ handheld
. . . . . . . . . . . . . . . . . . . . .72
Replacing the battery . . . . . . . . . 18
Step 2: Charging the battery . . . . . . 20
Performing the initial settings
Basic operations of your Sony
CLIÉ™ handheld. . . . . . . . . 28
Managing addresses and telephone
between your CLIÉ handheld and
Locating the components of the initial
CLIÉ handheld
Connecting to the Internet. . . . . . . . 80
Using the Bluetooth™ function . . . . 81
Taking images/movies . . . . 49
Taking images. . . . . . . . . . . . . . . . 49
Recording movies . . . . . . . . . . . . . 60
6
Using CLIÉ Application Manual . . . . .85
Solving problems . . . . . . . . . . . . . 102
Installing add-on applications on your
CLIÉ handheld . . . . . . . . . . . . . . .87
Introducing add-on applications . . . .88
Notes on use . . . . . . . . . . . . . . . . 104
Specifications . . . . . . . . . . . . . . . 107
INDEX. . . . . . . . . . . . . . . 112
Notes on this manual
• Screen pictures in this manual may be different from the actual displays in the supplied
software.
®
• Contents of this manual are written for users with knowledge of using Microsoft
®
Windows operating system. For details about computer operation, refer to the manual
for the computer.
About display (LCD) and camera lens
The LCD of your CLIÉ handheld is designed with precision technology. However, some
pixels may not work or may light always in some cases. Also, brightness of the display
may be inconsistent depending on the angle of view. These are caused by the nature of
the LCD and do not indicate a malfunction.
Please note that Sony does not guarantee for replacement or return in cases like those.
Do not keep the LCD or camera lens directed toward the sun for long time. It may cause
a malfunction. Please be careful when you locate it at an outdoor environment or place
next to a window.
Testing for taking pictures/movies and
recording voices
Prior to taking pictures/movies and recording voices, check that those files are normally
saved in your CLIÉ handheld or a “Memory Stick” media.
No guarantee for lost data or damaged data
Sony does not provide any guarantee for lost data or damaged data caused by improper
operations.
Copyrights
Television programs, films, video tapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provision of the
copyright laws.
7
www.compliance.sony.de/
Safety Information
This product complies with EN55022 Class Band
EN 55024 for use in the following areas:
residential, commercial and light industrial.
This product has been tested and found compliant
with the limits set out in the EMC Directive for
using connection cables not longer than 3 metres
(9.8 feet).
Opening the unit, for whatever reason, could lead
to damages that are not covered by the guarantee.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Picture and/or sound distortion may occur if this
equipment is positioned in close proximity to any
equipment emitting electromagnetic radiation.
To prevent fire or shock hazard, do not expose
your CLIE handheld to rain or moisture.
Use your CLIE handheld only with the supplied
AC adapter.
Your handheld comes with two cables, a
continental one and a UK one. To connect your
handheld to the power, make sure you use the
appropriate cable.
To disconnect your handheld completely from the
mains, unplug the AC adapter.
Please make sure that the socket outlet is easily
accessible.
Disposal of batteries
This product contains two batteries : a main
lithium-ion polymer battery and a backup
manganese lithium button battery (for battery
removal procedures, refer to the manual of this
product).
Danger of explosion if a battery is incorrectly
replaced.
Do not handle damaged or leaking batteries.
Dispose of promptly and properly.
The battery pack used in this device may present a
fire or chemical burn hazard if mistreated. Do not
disassemble, heat above 60ÅãC (140ÅãF) or
incinerate. Dispose of used batteries promptly.
Keep away from children.
Regulatory Information
Sony hereby declares that this product is in
compliance with the essential requirements and
other relevant provisions of European Directive
1999/5/EC.
To obtain a copy of the declaration of conformity
(DoC) with the R&TTE Directive, please access
the following URL: http://
Dispose of properly at end-of-life.
In some areas the disposal of batteries in
households or business waste may be prohibited.
Please use the public collection system.
8
USB cable (1)
AV cable (1)
Printer cable (1)
Battery Pack (1)
The battery pack is inserted into your
CLIÉ handheld at the factory.
Strap (1)
Installation CD-ROM
Refer to the illustration below to attach the
strap.
Protection card (1)
The protection card is stored in your CLIÉ
handheld at the factory.
Read This First - Operating Instructions (1, this manual)
Troubleshooting Q&A (1)
Customer Registration Guide (1)
Customer Registration card (Warranty)
Graffiti label (1)
Software license agreement (1)
Other printed materials
Make sure that the package contains all of the listed accessories. If any item is missing,
contact http://www.clie-link.com.
Attaching the strap
10
Sony CLIÉ™
handheld
components
Each part of the CLIÉ handheld and the supplied accessories is explained in the following.
Locating the parts of your Sony CLIÉ handheld
Front panel
A POWER LED (Page 31)
G Stylus (Page 28)
B IR port (Page 34)
H Bluetooth LED (Page 81)
(Page 29)
I “Memory Stick” LED
D BACK Button (Page 33)
(Page 35)
E VOICE REC Button
(Page 32, 73)
11
A Display Panel (Page 14)
H Bluetooth LED (Page 81)
B Screen (Page 42)
(Page 35)
C Graffiti Writing Area
(Page 42)
J Scroll Button (Page 34)
D POWER LED (Page 31)
K Hardware Keyboard
(Page 36)
L Wireless Communication
F Application Buttons
Slot (Page 37)
(Page 47)
G Application Buttons
(Page 47)
Available only when your CLIÉ
handheld is set to the turned style.
12
Back panel
B Flash Photometric Sensor
C Flash (Page 57)
I “Memory Stick” Slot
(Page 35)
J REC LED (Page 32)
L Lens Cover Lever (Page 32)
M Strap Hook (Page 10)
D CAPTURE Button
(Page 31, 49, 51, 61)
E Earphone Jack (Page 74)
F Battery Cover (Page 18)
G HOLD Switch (Page 33)
H POWER Switch (Page 30)
N Interface Connector Cover
(Page 21)
O Speaker (Page 44)
13
Changing the operating style
Your CLIÉ handheld can be used with the display panel set in three different
styles.
Carrying style
Set your CLIÉ handheld to the “carrying style,” when carrying it around in
your baggage or pocket to guard the screen from damage.
Opened style
Set your CLIÉ handheld to the “opened style,” when you enter data with the
hardware keyboard or take images/movies of yourself.
b
Open the display panel until it clicks into place.
14
Turned style
Set your CLIÉ handheld to “turned style” to make it compact when you operate
it with the Stylus or use it in the Camera mode.
b b
Open the display and
rotate it as indicated by an
arrow until it clicks into
place
Fold the display over the
keyboard
Note
Do not turn the display panel in any direction other than that specified and do not
apply too much force.
Closing the display panel
Close the display panel by rotating it as indicated by an arrow.
15
Locating cradle components
A Interface Connector
C USB Cable Connector
(Page 21)
You can connect the supplied USB
cable to connect the cradle and your
computer (page 67). You can also
connect the supplied printer cable to
Album” screen or “CLIE Viewer”
screen with your printer.
B AV output jack
You can connect the supplied AV
cable to view the screen of “CLIE
Album” with your television
(page 89).
D AC Adapter Connector
(Page 20)
E HotSync Button (Page 68, 71)
16
Locating the controls on the supplied audio
remote control
You can use the audio remote control when you play back music or audio
movies with an application such as Audio Player or Movie Player.
A ./> Button
C N/x Button
B Volume Control Button
D HOLD Switch
b For details on operating each application, refer to the “CLIÉ Application Manual”
installed on your computer.
17
Charging your
Sony CLIÉ™
handheld
Before you use your CLIÉ handheld for the first time,
be sure to charge the battery.
Step 1: Inserting/Replacing the battery
When you replace the battery, be sure to turn off your
CLIÉ handheld and check that the POWER LED and
“Memory Stick” LED are off prior to opening the
battery cover.
If you open the battery cover while the power is on,
data stored on your CLIÉ handheld or data being
recorded to a “Memory Stick” media may be deleted.
1
2
Open the battery cover.
Insert the battery.
You can easily insert the
battery by sliding the battery
release knob with the tip of the
battery.
Face the battery terminal
towards the display panel
side
18
3
Close the battery cover.
Verify that the battery is
completely inserted into the
slot and close the battery cover.
Removing the battery
Slide the battery release knob as directed by the arrow and remove the battery.
Tip
About the built-in rechargeable button battery
Your CLIÉ handheld uses the built-in rechargeable button battery to maintain data stored
in the built-in memory while replacing the Battery Pack.
The rechargeable button battery is automatically charged while you use your CLIÉ
handheld. However, the rechargeable button battery will be completely discharged in
approximately twelve hours if the power is not supplied from the Battery Pack. Make
sure you recharge the button battery before it gets completely discharged.
How to charge the rechargeable button battery
•
•
Place your CLIÉ handheld in the cradle while the Battery Pack is inserted.
Turn off your CLIÉ handheld for 24 hours or more while the charged Battery Pack is
inserted.
19
About the Battery Pack
The “Smart Lithium” function enables to exchange information about
battery conditions between your CLIÉ handheld and the Battery Pack.
Your CLIÉ handheld calculates the discharge rate according to the battery
condition and displays the battery’s remaining charge on the minute time
scale (page 43).
■ Remaining charge indicator
If the battery runs out quickly while sufficient remaining charge is read in
the display, recharge the battery fully to correct a misreading.
However, this operation may not work in the following cases.
• You use the battery at a high temperature for a long time.
• You leave the fully-charged battery for a long time.
• The battery has been worn-out .
■ Operating life
The efficiency of a battery is gradually reduced as the battery is charged or
time go on. If the operation time of your battery becomes shortened notably,
you may need a new one.
The operating life of your Battery Pack varies depending on storage
environments, operating environments, and battery model.
Step 2: Charging the battery
1
2
Connect the AC adapter
to the cradle.
Set up the stand of the
cradle.
20
3
5
4
Connect the AC adapter
to a wall outlet.
Open the interface
connector cover of your
CLIÉ handheld.
To a wall outlet
Insert your CLIÉ
handheld at an angle
into the cradle and lay it
back to fit into place.
The POWER LED indicator of
your CLIÉ handheld turns on and
charging starts.
It takes about four hours for your CLIÉ handheld to be fully charged for the
first time. The POWER LED indicator of your CLIÉ handheld turns off when
charging is completed.
Tip
If your CLIÉ handheld is charged frequently, subsequent charges will require less time.
Notes
•
•
•
If the battery in your CLIÉ handheld is fully discharged, all data stored in the memory
on your CLIÉ handheld will be lost.
Insert your CLIÉ handheld into the cradle completely until the POWER LED indicator
of your CLIÉ handheld turns on.
When you remove your CLIÉ handheld from the cradle, hold the stand of the cradle.
21
Performing the
initial settings
The first time you turn on your CLIÉ handheld, you are required to make initial settings.
Follow the on-screen instructions to configure the initial settings and to get accustomed to
operations on your CLIÉ handheld.
1
Slide the POWER switch.
Your CLIÉ handheld turns on, and the Welcome screen is displayed.
b
Slide the POWER switch
Tip
If you cannot turn on your CLIÉ handheld
•
•
Did you charge your CLIÉ handheld following the steps on page 18?
b For details, refer to the supplied manual “Troubleshooting Q&A.”
•
If you cannot turn on your CLIÉ handheld even after charging it, perform a soft
reset (page 39).
22
2
Take out the Stylus.
You can use the stylus to enter
data or to select applications.
Take out the Stylus
Notes
•
•
Always use the point of the stylus for tapping or making strokes on the CLIÉ
handheld screen. Never use a real pen, pencil, or other sharp object to write on
the screen.
When you put the stylus back in its holder, push it in until it clicks into place.
3
Press lightly on the screen with the stylus.
This action is called “tapping.”
The Setup screen for digitizer calibration is displayed.
b
Press lightly on the
screen (Tap)
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
23
4
Following the on-screen instruction, tap the center of the
displayed mark.
Note
If the digitizer is not configured correctly, the
scroll bar may not operate properly, “tapping”
may not work as expected, or other problems
may occur. For re-configuring the digitizer, refer
to “Customizing your Sony CLIÉ handheld
(Preferences): Adjusting the digitizer” in the
“Handbook.”
After calibration is completed, a screen for setting the time and date
appears.
5
Tap the Set Time box.
The Set Time screen is displayed.
Tip
You can reconfigure the date and time settings in the
Preferences screen.
b For details, refer to “Setting the Date & Time
preferences” in the “Handbook.”
6
7
Tap the arrow v or V to set the current time.
Tap each box to set the current
hour and minute.
Tap OK.
The current time is set and the
Setup screen is displayed.
24
8
9
Tap the Set Date box.
The Set Date screen is displayed.
Tap the arrow b or B next to the year to select the current
year.
10
11
Tap the current month and then tap the current date.
The Set Date screen closes.
Tap the Time Zone box.
The Set Time Zone screen is displayed.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
25
12
13
Tap the region to set the time zone and then tap OK.
Tap the arrow V next to Daylight Saving and select ON or
OFF.
14
Tap Next.
26
15
Tap Next and Done.
b
The initial settings are complete, and the
CLIE Launcher screen is displayed.
Initial settings are complete.
27
Basic operations of
your Sony CLIÉ™
handheld
This chapter describes how to start applications, enter data, and perform other basic
operations.
Basic operations
Using the stylus
With your CLIÉ handheld, you can use the supplied stylus to enter characters
or specify an application you want to run.
Taking out the stylus
The stylus is stored in the holder on the
display panel of your CLIÉ handheld.
Note
To avoid losing the stylus, always put it
back in its holder after use.
Tapping
The action of pressing lightly on the
screen with the stylus is called
“tapping.”
28
Dragging
Just as you can drag the mouse to select
(and drag) text or move objects on your
computer, you can use the stylus to
drag an item on the screen of your
CLIÉ handheld. Press the stylus lightly
on the item, and move it along the
screen surface.
Using the Jog Dial™ navigator
Your CLIÉ handheld is equipped with a Jog Dial™ navigator, which allows
you to perform all major operations without the stylus. You can operate your
CLIÉ handheld using the Jog Dial™ navigator with just one hand.
Rotating the Jog Dial™ navigator
Rotate the Jog Dial™ navigator to
select various items or to select an
application to start.
Pressing the Jog Dial™ navigator
Press the Jog Dial™ navigator to
decide the selected item or to run the
selected application.
Rotating while holding down the Jog Dial™
navigator
Some applications support operations executed by rotating while pressing the
Jog Dial™ navigator.
29
Functions of parts
POWER Switch
Turning on your CLIÉ handheld
Slide the POWER switch.
Your CLIÉ handheld turns on and the
last screen you viewed is displayed.
When your CLIÉ handheld turns on,
the POWER LED (page 31) indicator
lights green.
POWER Switch
Tip
When you turn on your CLIÉ handheld for the first time, the Welcome screen is
displayed (page 22).
Note
If you cannot turn on your CLIÉ handheld, make sure that if the HOLD switch is not in
the HOLD position.
If you try to turn on your CLIÉ handheld while the HOLD switch is in the HOLD
position, the POWER LED indicator blinks green three times.
Turning off your CLIÉ handheld
Slide the POWER switch again.
Tip
You do not have to save data, quit an application, or perform any of the other shutdown
procedures that your computer requires.
Sliding the POWER switch for more than two
seconds
You can switch on/off the backlight of the LCD.
30
POWER LED
Carrying style
Opened style
Turned style
The LED indicator shows the status of your CLIÉ handheld by its color.
LED
The status of your CLIÉ handheld
The power is ON.
Lights green
Lights orange
Blinks orange
The battery is being charged.
Alarm notifies you at a given time if you have
made an alarm setting in an application, such as
Date Book.
Blinks green
(three times)
The HOLD switch is in the HOLD position
(blinks when you try to turn on your CLIÉ
handheld).
OFF
The power is OFF.
CAPTURE Button
Press the button to take images or
movies.
b For details, refer to “Taking images/movies” on page 49.
31
Camera
You can take still images or movies.
CLOSE
OPEN
When the camera is not in use, close the
lens cover by sliding the lens cover lever to
the “CLOSE” position.
b For details, refer to “Taking images/movies” on page 49.
REC LED
Lights when you are recording a movie
or voice memo.
b For details, refer to the explanation of each application in the “CLIÉ Application
Manual” installed on your computer.
VOICE REC Button
Press the button to record sounds.
b For details, refer to “Using voice recorder” on page 73.
32
HOLD Switch
Protects your CLIÉ handheld from
accidental tapping on the screen or
pressure on the POWER switch when
you are carrying your CLIÉ handheld.
If you slide this switch while the power
is on, the screen display turns off, even
during an operation.
HOLD
Note
If you cannot turn on or operate your CLIÉ handheld, check if the HOLD switch is not
in the HOLD position.
If you try to turn on your CLIÉ handheld while the HOLD switch is in the HOLD
position, the POWER LED indicator blinks green three times.
BACK Button
Cancels the selection of an item and
cancels the operation. Depending on
the application, unique features such as
restoring to the previous screen are
assigned.
Tip
Press the BACK button for a few
seconds to switch to the CLIE
Launcher screen.
b For details, refer to the explanation of each application in the “CLIÉ Application
Manual” installed on your computer.
33
Scroll Button
Displays text and other information
that extends beyond the area of the
screen. Pushing the V button scrolls
down to display information below the
current viewing area, and pushing the
v button scrolls up to display the
information above the current viewing
area. Depending on the application,
unique features are assigned.
b For details, refer to the explanation of each application in the “CLIÉ Application
Manual” installed on your computer.
IR port
You can beam data between your CLIÉ handheld and another CLIÉ handheld
®
or Palm OS PDA.
b For details, refer to “Beaming” in the “Handbook.”
Direct your CLIÉ handheld towards a target device
as indicated by an arrow when using the remote
control function.
* Move your CLIÉ handheld gradually to find the
most sensitive direction.
Direct your CLIÉ handheld
towards a target device as
indicated by an arrow when
using the beaming function.
Tip
You can also use your CLIÉ handheld as a remote control with the CLIE Remote
Commander application.
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
34
“Memory Stick” Slot
Insert “Memory Stick” media into this
slot.
The “Memory Stick” LED blinks
orange while your CLIÉ handheld is
writing data to or reading data from
“Memory Stick” media.
™
b For details, refer to “Using “Memory Stick ” media” in the “Handbook.”
Inserting “Memory Stick” media
“Memory Stick” LED
The “Memory Stick” LED blinks orange while
your CLIÉ handheld is writing to or reading
data from “Memory Stick” media.
Carrying style
Opened style
Turned style
Notes
•
•
Insert “Memory Stick” media in the right direction. If “Memory Stick” media is
forcibly inserted in the wrong direction, the “Memory Stick” slot may be damaged.
Do not insert “Memory Stick” media other than the “Memory Stick” slot.
35
Removing “Memory Stick” media
b
Push “Memory Stick”
media in
Pull “Memory
Stick” media out
Note
Make sure that your CLIÉ handheld is not writing to or reading data from “Memory
Stick” media (the “Memory Stick” LED is not blinking) before removing it.
If you remove “Memory Stick” media while the “Memory Stick” LED is blinking,
recorded data may be deleted or damaged.
Hardware Keyboard
You can use the hardware keyboard in
the same way as with the keyboard of
your computer. This is useful when
you want to enter lots of data.
Input commands list
You can carry out commands using the hardware keys in combination.
Key combinations
Example: Ctrl+C t Hold down the Ctrl key and press the key of the
character C.
Combination
Function
Fn + character
Shift + character
Enter the numbers and marks printed in blue.
Enter letters in upper case when “Caps” is off.
Selects a continuing/preceding text.
Selects until the first letter of the text.
Selects until the last letter of the text.
Copies the selected text.
Shift +
/
Shift + Ctrl +
Shift + Ctrl +
Ctrl + C
Ctrl + X
Cuts the selected text.
36
Ctrl + V
Ctrl + D
Ctrl + L
Ctrl + H
Ctrl + M
Ctrl + F
Ctrl +
Pastes the selected text.
Deletes the selected text.
Turns the backlight on and off.
Switches to the CLIE Launcher screen.
Displays the menu.
Opens the Find dialog box.
Same as rotating the Jog Dial™ navigator upwards.
Ctrl +
Same as rotating the Jog Dial™ navigator
downwards.
Ctrl + 3
Same as pressing the Jog Dial™ navigator.
Same as keeping the Jog Dial™ navigator pressed.
Same as pressing the BACK button.
Ctrl + 3 and hold
Ctrl + BS
Ctrl + BS and hold
Ctrl + Shift +
Same as keeping the BACK button pressed.
Same as rotating the Jog Dial™ navigator upwards
while pressing it.
Ctrl + Shift +
Same as rotating the Jog Dial™ navigator
downwards while pressing it.
Ctrl + Tab
Jumps to the next field.
Ctrl + Shift + Tab
Jumps back to the previous field.
Wireless Communication Slot
You can connect to the Internet by
using the compact flash type data
to as network card).
b For details, refer to “Connecting to the Internet” on page 80.
b For details about an operation confirmed network card, refer to “Operation confirmed
natwork card” on page 110.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
37
Notes
•
Only the compact flash type data network card can be inserted into the wireless
communication slot. Network cards or memory cards other than the above-mentioned
will not work. Do not use any other card in your CLIÉ handheld, as it may cause a
malfunction.
•
•
If your CLIÉ handheld is not working properly, remove the network card once, and
insert the network card again.
There may be some data network services that may not be used, depending on the
network card and provider that you are using. For details, refer to the operating
instructions of your network card or contact your Internet service provider.
Inserting the network card
Tip
The protection card is inserted into the wireless communication slot at the factory.
Note
Do not insert the network card forcibly in the wrong direction or at the wrong angle. It
may cause a malfunction or damage your CLIÉ handheld.
Removing the network card
Make sure that your CLIÉ handheld is turned off prior to removing the network
card.
Notes
•
•
•
Do not remove the network card while it is connected to the Internet. It may cause a
malfunction.
When the wireless communication slot is empty, always insert the protection card to
protect the slot.
Do not remove the network card forcibly in the wrong direction or at the wrong angle.
It may cause a malfunction, or damage your CLIÉ handheld or network card.
38
Restarting your Sony CLIÉ handheld
Normally, you do not need to reset your CLIÉ handheld. However, should your
CLIÉ handheld not turn on or not respond, you can perform a soft reset to solve
the problem.
Follow the procedure below to reset your CLIÉ handheld.
Performing a soft reset
All records and entries stored in your CLIÉ handheld are retained even after
performing a soft reset.
1
Take out the stylus pin by unscrewing the metal barrel
from the stylus quill.
2
Use the stylus pin to gently press the RESET button.
The system shuts down and then restarts.
After restarting, the system displays “palm
powered,” “CLIÉ,” and “SONY,” followed
by the Preferences screen for setting the
time and date.
Notes
•
•
After the RESET button is pressed, it takes a while until the Preferences
screen is displayed. Be sure not to press the RESET button again while resetting.
Do not press the RESET button with a tool other than the stylus pin. It may cause
a malfunction.
39
Performing a hard reset
If the soft reset does not solve the problem, you need to perform a hard reset to
restart your CLIÉ handheld.
Notes
• All records and add-on applications stored in your CLIÉ handheld
will be erased by performing a hard reset.
•
Perform a hard reset only if a soft reset does not solve your problem.
You can restore your CLIÉ handheld data if you have made a backup on your
computer or “Memory Stick” media.
b For details, refer to “Backing up your Sony CLIÉ™ handheld data” in the
“Handbook.”
1
2
Slide the POWER switch.
While sliding the POWER switch, press the RESET button
gently with the stylus pin.
Press the RESET button
with the stylus pin as
illustrated on page 39
3
When the palm powered screen is displayed, release the
POWER switch after three seconds.
A message warning that you are about to erase all the data stored on your
CLIÉ handheld is displayed.
40
4
Press the v button on the keyboard panel of your CLIÉ
handheld.
Press the v button
A hard reset is performed on your CLIÉ handheld.
After restarting, the system displays “palm powered,” “CLIÉ,” and “SONY,”
followed by the Welcome screen. Refer to “Performing the initial settings” on
page 22.
After a hard reset, only the current date and time are retained. Formats,
Preferences, and other settings are restored to the factory settings.
Notes
•
•
After the RESET button is pressed, it takes a while until the Welcome screen is
displayed. Be sure not to press the RESET button again while resetting.
If the v button is not pressed for long enough, the hard reset may not be performed.
41
Locating the components of the initial screen
Tip
If a different screen is displayed, tap the Home
icon.
A CLIE Launcher Groups List
The list of CLIE Launcher groups is
displayed.
G Application Manager Icons
(page 45)
H Application Icons (page 46)
B Favorite Applications
(shortcuts)
I Position Indicator
®
J Graffiti Writing Area
You can create shortcuts to favorite
applications.
This is the area for manually entering
®
data with Graffiti characters.
C Home Icon
K Calculator (page 95)
If you tap this icon, the on-screen
Calculator will be displayed.
If you tap this icon, the Application
Launcher (List ofapplications) screen
will be displayed.
L Find Icon
D Menu Icon
If you tap this icon, the Find dialog
box will be displayed.
If you tap this icon, the menu of the
current application will be displayed.
M Graffiti/Software Keyboard
E Brightness Adjustment Icon
Icon (page 45)
(page 44)
N Resize Icon
F Status Bar (page 43)
If you tap this icon, the screen view
will be switched.
42
Status Bar
The status bar displays the following icons for all applications. Additional icons appear
according to the applications in use.
Tap this icon to display the CLIE Launcher screen.
Tap this icon to display the menus of the current application.
Tap this icon to open the Find dialog box.
Tap this icon to display the Silk Plug-In dialog
box.
If the Silk Plug-In is installed, you can edit the
display and functions of the Silk Screen area by
switching the Silk Plug-In.
Silk Screen area
Displays the battery’s remaining charge. The
is being charged.
icon is displayed while the battery
Tap this icon to display the Battery Information dialog box.
Information display icon
Power used
Battery status
Remaining charge of the battery
Estimated time for charging and operation
Tap this icon to display the information for the “Memory Stick” media inserted in
your CLIÉ handheld.
When the Data Protection switch of the “Memory Stick” media is in the “Lock”
position, the
icon is displayed.
When you insert a “Memory Stick”-type device in your CLIÉ handheld, the
icon is displayed.
When the “Memory Stick” media cannot be read normally, the
displayed.
icon is
When the “Memory Stick” slot of your CLIÉ handheld is empty, the
displayed.
icon is
43
Tap this icon to display the Adjust Volume dialog box.
1 Turns off the sound of your CLIÉ
handheld irrespective of the volume
level setting.
While the Muting mode is selected, the
icon is displayed in the status bar.
2 Adjusts the volume level for playback
sound of audio files or movie files.
3 Adjusts the volume level for System
sound, Alarm sound, and Game sound.
The setting affects the General in the
Preferences.
b For details, refer to “Customizing your
Sony CLIÉ handheld (Preferences): Setting
sounds” in the “Handbook.”
Displays the current time. To change the display format, tap Time at the
Formats in the Preferences.
b For details, refer to “Customizing your Sony CLIÉ handheld (Preferences): Setting the
Date & Time preferences” in the “Handbook.”
Tap this icon to show or hide the Graffiti writing area (for Graffiti-compatible
applications only).
Brightness Adjustment Icon
Tap this icon to adjust the brightness level of
your CLIÉ handheld's LCD screen.
Note
If the digitizer preferences are not set correctly, you
may have difficulty in tapping.
b For details, refer to “Customizing your Sony CLIÉ
handheld (Preferences): Adjusting the Digitizer” in
the “Handbook.”
44
Application Manager Icons
You can manage your applications with the
application manager icons.
The followings are featured as standard functions.
: Beam, Send
: Info
: Delete
b For details, refer to “Sony CLIÉ™ handheld basic operations: Using “CLIE
Launcher”: Application manager icon” in the “Handbook.”
Tip
Application manager functions may be added when you install certain applications.
Icons for switching the Graffiti/Software
Keyboard
You can switch between the Graffiti
writing area and the software keyboard
by tapping this icon.
The software keyboard is much like as
the on-screen keyboard, however the
applications can be used without
minimizing the current screen.
Tip
To switch the software keyboard display
You can switch the keyboard display by tapping the following icons:
: The alphanumeric keyboard
: The international keyboard
: The symbol keyboard
45
Using applications
Your CLIÉ handheld can carry out various functions through applications.
Starting an application using the Jog Dial™
navigator
1
Tap the Home
screen.
icon to display the CLIE Launcher
2
Rotate the Jog Dial™ navigator to select an application
icon and press it to start.
Tip
You can also tap the desired application icon in
the CLIE Launcher screen to start the
application.
b For details, refer to “Sony CLIÉ™ handheld basic operations: Starting an
application” or “Sony CLIÉ™ handheld basic operations: Using ‘CLIE
Launcher’” in the “Handbook.”
46
Starting an application using the
application buttons
Main body side
Display panel side
You can press the application button to start an application. By default, the
as the icons on each button show.
Note
Application Buttons on the display panel side are available only when your CLIÉ
handheld is set to the turned style (page 15).
Tips
•
•
Even when your CLIÉ handheld is turned off, pressing an application button turns on
your CLIÉ handheld to start an application.
You can assign your desired application to each application button.
b For details, refer to “Customizing your Sony CLIÉ handheld (Preferences): Assigning
applications to application buttons” in the “Handbook.”
Quitting an application and opening
another application
You can only operate one application at a time on your CLIÉ handheld. When
you start another application, the previous application automatically closes,
therefore you do not need to quit an application.
To open an application when another application has been already started, tap
the Home
icon or press the application button.
Tip
You do not need to manually save data when you quit an application.
All the changes in the application that you are working on are automatically saved.
Note
For some applications, you need to operate Finish or Save.
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
47
Entering data
Entering data
There are five ways to enter data on your CLIÉ handheld. Select the one that
best suits you.
zHardware keyboard (page 36)
You can enter data using the hardware keyboard in the same way as with the
keyboard of your computer. This is useful when you want to enter lots of
data.
zOn-screen keyboard
b For details on entering data using the on-screen keyboard, refer to “Entering data in
your Sony CLIÉ™ handheld: Practicing entering data using the on-screen
keyboard” in the “Handbook.”
zSoftware keyboard (page 45)
The working of the software keyboard is the same as the on-screen keyboard,
however the applications can be used without minimizing the current screen.
®
zGraffiti
®
You can enter data using an exclusive input system called Graffiti . Once
®
you get used to writing with Graffiti , you will find that it is much faster than
using the on-screen keyboard.
®
b For details on using Graffiti , refer to “Entering data in your Sony CLIÉ™
®
handheld: Using Graffiti writing to enter data” in the “Handbook.”
®
zHotSync operation with a computer
®
You can enter data using your computer keyboard with a HotSync
operation. Text data is transferred from your computer to your CLIÉ
®
handheld by a HotSync operation using the Palm™ Desktop for CLIÉ
software.
b For details, refer to the Help menu in the Palm™ Desktop for CLIÉ software.
48
Taking images/
movies
Taking images
The simple way to take images
1
Set your CLIÉ handheld to the
turned style and open the
camera lens cover.
Tip
Set your CLIÉ handheld to the opened style
when you take images of yourself.
2
Press the CAPTURE button to
start “CLIE Camera S.”
The application starts after a few
seconds.
Tip
You can also select the CLIE Cam S
icon in “CLIE Launcher” (page 46) to start “CLIE Camera S.”
3
4
Capture the subject in the
viewfinder and press and
hold the CAPTURE button
half way down.
Your CLIÉ handheld beeps and
focuses on the subject.
Press the CAPTURE button fully down.
The shutter clicks and an image is taken.
49
Locating components on the
“CLIE Camera S” screen
A EV Adjustment (Page 58)
J Album Start Button
Starts “CLIE Album.”
B “Movie Recorder” Start
Button
K Album Select Button
Tap the button to select the album
where the taken images are located.
Switches the application to “Movie
Recorder” for taking movies.
C Custom Button (Page 55)
L Viewer Start Button
Starts “CLIE Viewer” to display the
taken images.
D Zoom Magnification
(Page 58)
M Image Size/Quality Select
E Setup Button
Button (Page 52)
Displays the Camera Setup screen.
N Delete Button
F Image Size/Quality Display
Deletes an image selected in the
image thumbnail display.
(Page 52)
G Image Thumbnail Display
Displays the last three images you
have taken.
O Rotate Button
Rotates an image selected in the
image thumbnail display 90 degrees
clockwise.
H Flash Mode Button (Page 57)
I CAPTURE Button
Tap the button to take an image.
50
Using functions
Using the self-timer
1
Tap the Setup
screen.
button to display the Camera Setup
2
Tap Self Timer and select
On. Tap the OK button.
(Self-timer) is displayed on the screen.
b
3
Capture the subject in the viewfinder and press the
CAPTURE button fully down.
Countdown starts and the image will
be taken after approximately 10
seconds.
Tip
To cancel the self-timer during the
operation
Tap the
button on the right of the
countdown bar.
Note
If you stand in front of the camera and press the CAPTURE button, the focus and
exposure may not be configured properly.
51
Selecting the image size/quality
You can select the image size (number of pixels) and image quality
(compression ratio), depending on the purpose. By tapping the
you can select a favorite setting from three kinds of preset entries.
button,
Presetting image size/quality
1
Tap the Setup
screen.
button to display the Camera Setup
2
3
Tap Size, Quality to display the Size, Quality screen.
Select the image size/quality from the list and tap the OK
button.
Tip
The larger image size or lower
compression ratio improves images but
then requires a larger amount of memory.
This means the number of images you can
save in the memory of your CLIÉ handheld
or “Memory Stick” media will be reduced.
Select the image size and image quality that
suits your purpose.
b For details, refer to “CLIE Camera S” in the “CLIÉ Application Manual” installed
on your computer.
52
Selecting the location to where the captured
images are to be saved
1
Tap the Setup
screen.
button to display the Camera Setup
2
Tap Save to to select the location to where the captured
images are to be saved.
Priority MS
If a “Memory Stick” media is inserted into the slot,
captured images will be saved on the “Memory Stick”
media. If not, captured images will be saved in the memory
of your CLIÉ handheld.
Even if the free space of an inserted “Memory Stick” media
is insufficient, captured images will not be saved in the
memory of your CLIÉ handheld.
(Default)
MS
Captured images will be saved on “Memory Stick” media.
Internal
Captured images will be saved in the memory of your
CLIÉ handheld.
53
Selecting the scene mode
When taking images of scenes or people at night, you can use the scene mode
to enhance the impact of the image.
1
Tap the Setup
screen.
button to display the Camera Setup
2
Tap Scene to select the scene mode.
Normal
Twilight
Select this mode normally. (Default)
You can take images of a night
scene without ruining the
effect of the scene.
Since the shutter speed
becomes slower, make sure
you keep the camera still.
The flash is not available in
this mode.
You can select this mode when
taking images of people and a
night scene at a time. You can
take images of people with
Twilight
Portrait
distinct outlines as well as a
night scene without ruining the
effect of the scene.
Since the shutter speed becomes slower, make sure you
keep the camera still.
The flash works automatically.
54
Selecting the flash mode
You can select the flash mode according to the situation.
1
Tap the flash mode
button and select a flash mode.
The Flash mode
icon is displayed.
Auto
The flash works automatically in poor light conditions.
(Default)
On
The flash works every time.
(Flashes forcibly)
Off
The flash is turned off.
(No flash)
Note
Do not use a flash towards the eyes from a short distance, as a visual disturbance may
occur, especially when taking pictures of a baby. Be sure to maintain a distance of at least
one meter from the baby when taking a picture with a flash.
57
Other functions
b For details, refer to “CLIE Camera S” in the “CLIÉ Application Manual” installed on
your computer.
Main screen
Zoom
Tap the
adjustment.
button to switch between the two stages of
/ button to adjust the exposure.
EV Adjustment Tap the
Camera Setup screen
White Balance You can adjust the white balance.
When the white balance is set to Auto, the white balance is
adjusted automatically according to the condition. If you
want to fix the setting or to take images under specific
lighting conditions, you can adjust the white balance
manually.
(Default: Auto)
Spot Metering You can adjust the exposure to the subject even when
taking images against the sun or the contrast between the
subject and background is high.
(Default: OFF)
Flash Level
You can adjust the brightness of the flash.
(Default: Normal)
Red Eye
Reduction
Before taking images, the flash pre-strobes to reduce the
red-eye phenomenon.
(Default: OFF)
Focus
Effect
You can select a focusing method
(Default: AF (Always))
You can add special effects to bring out the contrast in
images.
(Default: OFF)
Save Settings You can choose either to maintain current settings or
restore default settings at the start of the next function.
(Default: Restoring default settings for all)
Jog Dial
You can assign your favorite function to the Jog Dial™
navigator.
(Default: ZOOM)
58
Enjoying image files
Preparing
Taking images
CLIE Camera S ............................................................................page 88
Importing image files from your computer
Image Converter...........................................................................page 88
Viewing/Selecting
Viewing/Selecting image files by searching
from the list
CLIE Viewer ................................................................................page 89
Using features
Managing image files in albums
CLIE Album.................................................................................page 89
Importing image files from your CLIÉ handheld
to your computer
PictureGear Studio .......................................................................page 90
Displaying image files automatically
PhotoStand ...................................................................................page 90
Editing image files
Photo Editor..................................................................................page 91
Attaching image files to an address
Address.........................................................................................page 93
Sending image files by e-mail
CLIE Mail ....................................................................................page 95
Transferring image files to your computer
Memory Stick Import...................................................................page 97
59
Recording movies
Recording movies
1
Set your CLIÉ handheld to the turned style and open the
camera lens cover.
Tip
Set your CLIÉ handheld to the opened style
when you record movies of yourself.
2
3
Insert the “Memory Stick” media to which you want to
save movie files.
s
Select Movie Rec
start.
icon in “CLIE Launcher” (page 46) to
The application starts after a few
seconds.
60
4
5
Capture the subject in the viewfinder and press the
CAPTURE button.
Movie recording starts.
Press the CAPTURE button once again to stop movie
recording.
Enjoying movies
Preparing
Recording movies
Movie Recorder............................................................................page 91
Importing movie files from your computer
Image Converter...........................................................................page 88
Giga Pocket Plugin ......................................................................page 89
Viewing/Selecting
Viewing/selecting a movie file after searching
from the list
CLIE Viewer ................................................................................page 89
Playing movies
Movie Player ................................................................................page 91
Sending
Sending movie files by e-mail
CLIE Mail ....................................................................................page 95
61
Viewing/Playing back files (CLIE Viewer)
You can use “CLIE Viewer” to view image files, movie files, handwritten
memos and play back voice memos saved on your CLIÉ handheld.
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Opening/Playing back files
1
Tap the Home
screen.
icon to display the CLIE Launcher
2
3
Select the CLIE Viewer
icon to start “CLIE Viewer.”
Tip
You can also start “CLIE Viewer” by
selecting the
icon in the “CLIE
Camera S” window.
Rotate the Jog Dial™ navigator to select the file you want
to display and press the Jog Dial™ navigator.
The selected file is displayed.
Tip
You can also display the file by tapping the file
icon.
The files are listed in order of creation date and
time.
62
You can select a file from the list screen in CLIE Viewer when attaching image
files or movie files of your CLIÉ handheld to e-mails, when using the image
files in “PhotoStand” (page 90), “CLIE Album” (page 89) and “Photo Editor”
(page 91), or when deleting files.
1
Start “CLIE Viewer” and tap the command button to
select the function.
: Select the file to be attached to an
e-mail
This icon is displayed if “CLIE Mail”
is installed.
: Select the image file to be used in
“PhotoStand”
: Select the file to be deleted
: Select other applications such as
“Photo Editor” or “CLIE Album” by
using the pull-down menu
2
Tap to select the check box of the file.
Tip
Tap Select All to select all the files.
3
Tap OK.
The function selected in step 1 is executed.
63
Using your CLIÉ™
handheld with
your computer
Follow the procedure below prior to using your CLIÉ handheld with your
computer.
1
Install the software on your computer
2
3
Connect the cradle to your computer
Enter a user name for your CLIÉ handheld
Step 1: Install the software on your
computer
Do not connect the supplied cradle to your computer
before installing the software. The software may not
be installed properly.
must be installed on your computer. The software is used for data transfer
between your CLIÉ handheld and computer, and handling data such as Address
Book on your computer.
b For details on the system required on a computer, refer to “System required on a
computer” on page 111.
Notes
•
•
Do not simply copy the “Palm™ Desktop for CLIÉ” folder from the supplied CD-
ROM to your computer. To install the software properly, follow the installation
procedure described in this manual.
If you use Windows 2000 Professional or Windows XP operating system, log on with
a User Name in the Administrators group before installing the software.
64
•
If you own another CLIÉ handheld and the old version of “Palm™ Desktop for CLIÉ”
has been already installed on your computer, follow the procedure below to upgrade
to the new version.
* If you are using PEG-S300, refer to the official Sony CLIÉ website (refer to the
back cover of this manual for the URL).
b For details, refer to “Using data with another Sony CLIÉ handheld” in the
“Handbook.”
Exit all applications running on Windows®.
You should quit all applications that automatically run at start-up, such as
1
fax communication software, anti-virus tools, screen savers and the
®
Microsoft Office Shortcut Bar.
2
To install the English version, insert installation CD-ROM
[SONY CLIÉ Installation CD-ROM for PEG-NZ90 English].
In the screen that appears, click Install Palm Desktop for CLIÉ.
A Welcome window is displayed.
3
4
Click Next.
The Palm™ Desktop for CLIÉ software installation begins.
Follow the on-screen instructions.
Select the application you will use to synchronise your
CLIÉ handheld with your computer.
If you select Synchronize with Palm Desktop for CLIÉ, Intellisync
Lite will not be installed. If you select Synchronize with Microsoft
Outlook or Lotus Organiser, Palm™ Desktop and Intellisync Lite will
be installed.
5
6
Click Next.
The Setup Type window is displayed.
Select the setup type (Complete or Custom) and the
destination folder. If you wish to synchronise PEG-S300
with your CLIÉ handheld, follow the steps below:
• Select Custom for the setup type and click Next.
• On the select components screen, make sure that USB Switcher is
selected.
• Follow the on-screen instructions until setup is complete.
• When you follow the instructions on-screen, the Create User
Account screen is displayed.
7
Fill in the user name in the Create User Account screen.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
65
8
9
Click Next.
Follow the on-screen instructions to finish the software
installation.
10
Fill in the customer registration following the instructions
shown on the screen. You need Internet access for the
online customer registration.
11
12
Perform an operation check for the HotSyncR feature
following the on-screen instructions.
Click Finish.
The software installation is completed.
Installation of the Palm™ Desktop for CLIÉ software on
your computer is completed.
66
Step 2: Connect the cradle to your computer
When you have completed the Palm™ Desktop for CLIÉ software installation,
connect the cradle to a USB port of your computer so you can use your CLIÉ
handheld with your computer.
Connect the cradle to your computer
To a
USB port
of your computer
To a wall
outlet
Note
Be sure to connect the cradle directly to a USB port of your computer. If the cradle is
®
connected to a computer via another device, such as a USB hub, a HotSync operation
may not be performed properly.
67
3
4
When the New User dialog box is displayed on your
computer window, enter your user name.
You can enter any user name you prefer.
Note
If you have already used another CLIÉ handheld
Enter a user name that is different from the one you use for another CLIÉ handheld.
If you set an identical user name to multiple CLIÉ handhelds, improper operation
may occur.
Tip
When you import data from another CLIÉ handheld
Refer to “Using data with another Sony CLIÉ handheld” in the “Handbook.”
Click OK on the computer window.
®
A beep sounds and the HotSync operation starts.
Your user name selected in step 3 is transferred to the CLIÉ handheld.
When the setup is complete, “HotSync operation complete.” will be
displayed on your CLIÉ handheld.
Setup is completed!
69
Synchronizing data between your CLIÉ handheld
®
and computer (HotSync )
®
What is a HotSync operation?
®
A HotSync operation is a one-step operation that allows you to synchronize
data between your CLIÉ handheld and your computer, back up the data of your
CLIÉ handheld on your computer, and install add-on applications.
®
b For details, refer to “Exchanging and updating data using a HotSync operation
®
(Other HotSync operations)” in the “Handbook.”
®
Performing a HotSync operation
The following procedure explains how to synchronize data between your CLIÉ
handheld and computer, using “Date Book” as an example.
1
Turn on the computer.
2
Refer to the procedure on page 75 and enter data in
“Date Book.”
3
Place your CLIÉ handheld in the cradle.
70
4
Press the HotSync
button on the cradle.
The HotSync operation between your CLIÉ handheld and computer starts.
Press the HotSync
button
®
When the HotSync operation is complete,
the following screen is displayed.
5
6
Double-click the “Palm™ Desktop for CLIÉ” icon on the
Windows desktop.
You can also click Start, select Programs (All Programs in Windows
XP), Sony handheld, and click Palm Desktop for CLIÉ to start the
application.
The Palm™ Desktop for CLIÉ software starts.
Click the Date Book
The Date Book window is
displayed.
icon.
If you select the same date you
entered the schedule for in step
2, you will see the entered
schedule.
71
Enjoying your
CLIÉ™ handheld
Using your CLIÉ handheld to view image files and
movie files taken with “Memory Stick”-
compliant devices
Tip
You can view the following file formats on your CLIÉ handheld:
Image files: JPEG (DCF) format, PictureGear Pocket format
Movie files: Movie Player format (movies taken with your CLIÉ handheld or converted
using the Image Converter software), MPEG Movie format (MPEG1 format movies
taken with a Sony Digital Still Camera or Handycam)
For formats of pictures that can be taken with your “Memory Stick” compliant devices,
refer to their respective operating instructions.
1
Insert the “Memory Stick” media to which you have saved
image files and movie files in your CLIÉ handheld.
2
Start “CLIÉ Viewer” to view image files or movie files.
b For details, refer to “Viewing/Playing back files (CLIE Viewer)” on page 62.
72
Using voice recorder
Recording a voice memo
1
Select the Voice Rec
(page 46) and start it.
icon in the CLIE Launcher screen
2
3
Press the VOICE REC button.
The recording starts. Speak into the built-in
microphone.
Tip
As soon as the VOICE REC button is pressed,
“Voice Recorder” automatically starts and then
recording starts.
Press the button once again to stop recording.
A voice memo can be played using “Voice Recorder” or “CLIE Viewer.”
b For details about “Voice Recorder,” refer to “Voice Recorder” in the “CLIÉ
Application Manual” installed on your computer.
b For details about “CLIE Viewer,” refer to “Viewing/Playing back files (CLIE
Viewer)” on page 62.
73
Listening to music
Note
You need to perform the following procedure to listen to music on your CLIÉ handheld.
1
Transfer music files you want to play, from your computer
to your CLIÉ handheld.
b For details, refer to “Music” in the “CLIÉ Application Manual” installed on your
computer.
2
Connect the supplied remote
control and Earphones to the
CLIÉ handheld.
3
4
Select the AudioPlayer
icon in the CLIE Launcher
screen (page 46) and start it.
Tap the playback
play music.
button to
Tap the stop
button to stop the
music.
Playback
button
Stop
button
Tip
You can also use the remote control.
74
Managing schedules (Date Book)
Entering a schedule
1
Press the
button to start “Date Book.”
2
3
Tap New and set the start time and end time of the
schedule.
1 Tap to set the start time.
2 Tap to set the end time.
3 Tap to determine the settings.
4 Tap to select “hour.”
5 Tap to select “minute.”
Enter a schedule.
75
Deleting a schedule
1
Tap a schedule you want to delete and tap the Menu
icon from the Date Book list screen.
2
Tap Delete Event... from the Record menu.
The confirmation message is displayed.
3
Tap OK.
76
Managing addresses and telephone numbers
(Address)
Entering a new address
1
Press the
button to start “Address”.
2
Tap New and enter details.
Tip
You can scroll the screen by tapping the v/V
arrow in the bottom right-hand corner.
Deleting an address entry
1
Tap an address you want to delete and tap the Menu
icon.
2
Tap Delete Address... from the Record menu.
The confirmation message is displayed.
3
Tap OK.
77
Exchanging Date Book and Address data
between your CLIÉ handheld and computer
®
HotSync operation (page 70) enables you to exchange Date Book data and the
Address data between your CLIÉ handheld and computer.
Depending on the applications that you use on your computer, there are two
ways to exchange data.
Exchanging data between your CLIÉ handheld and
Palm™ Desktop for CLIÉ software on your computer
Palm™ Desktop for CLIÉ software on your computer and your CLIÉ
handheld.
b For details on how to exchange data with the Palm™ Desktop for CLIÉ software, refer
®
to “Synchronizing data between your CLIÉ handheld and computer (HotSync )”
(page 70).
Exchanging data between your CLIÉ handheld and
®
®
computer
“Intellisync Lite” must be installed on your computer to connect with
“Microsoft Outlook” and “Lotus Organizer.”
®
b For details on how to install, refer to “Installing add-on applications on your CLIÉ
handheld” (page 87).
Tip
The Intellisync Lite software can be installed with the option “Using your CLIÉ
handheld” of the installer menu screen.
b For details on how to start and setup, refer to the help of “Intellisync Lite.”
To view help, click Programs (In case of Windows XP, click All Programs) from
the Start menu, then click Intellisync Lite and Intellisync Help.
78
Viewing computer documents on your CLIÉ
handheld (Picsel Viewer for CLIE)
Note
Perform the following procedure before using “Picsel Viewer for CLIE” application.
1
Install “Picsel Viewer for CLIE” in your CLIÉ handheld.
2
Transfer documents from your computer to a “Memory
Stick” media.
Use “Memory Stick Import” to transport documents to the “Memory Stick”
media inserted into the slot of your CLIÉ handheld.
3
Start “Picsel Viewer for CLIE” on your CLIÉ handheld and
view the documents transferred from your computer.
b For details, refer to “Picsel Viewer for CLIE” in
the “CLIÉ Application Manual” installed on your
computer.
79
Connecting to the Internet
Note
For an internet connection, you must have a network card that is compliant with your
CLIÉ handheld and you must be registered with an Internet Service Provider.
Installing applications in your CLIÉ
handheld
Install applications on your CLIÉ handheld for your purposes.
Browsing websites on your CLIÉ handheld: NetFront v3.0 for CLIE (page 95)
Exchanging e-mail: CLIE Mail (page 95)
b For details about the necessary set-up of each application, refer to the “CLIÉ
Application Manual” installed on your computer.
Setting up a network card
Set up a network card, such as “Wireless LAN card PEGA-WL100”.
Tip
For details on how to set up a network card, refer to the manual of each network card.
1
Insert the network card into your CLIÉ handheld.
2
Select the desired application in “CLIE Launcher”
(page 46) and start it.
3
Start browsing websites, sending or receiving e-mail.
Internet connection starts automatically.
Tip
When you want to attach image files or movie files from your CLIÉ handheld to an
e-mail, you can select those files from the list displayed in “CLIE Viewer”.
b For details, refer to “Selecting/Deleting files” (page 63).
80
Using the Bluetooth™ function
Note
The communication speed and communication range vary depending on factors such as
obstacles between devices, radio wave conditions, or specifications of a target device.
The Bluetooth™ function enables wireless communication within a range of
approximately 10 meters. You can use the function to exchange data between
your CLIÉ handheld and other Bluetooth compliant devices.
To use the Bluetooth™ function, select Bluetooth in the Preferences
screen and set to Enabled for the Bluetooth item.
b
Set to Enabled
b
Bluetooth LED
The LED lights up during data exchange
using the Bluetooth™ function.
It blinks when the function is on standby.
Carrying style
Opened style
Turned style
b For details, refer to “Customizing your Sony CLIÉ handheld (Preferences): Setting the
Bluetooth™ function” in the “Handbook.”
81
Sending data such as image files or Date
Book data to another CLIÉ handheld with
the built-in Bluetooth function or Bluetooth
Module (optional)
1
Select a file.
Sending an image file, movie file, voice
memo, or handwritten memo
Start CLIE Viewer (page 62),
tap the Menu
icon, select
Send… from the Data menu,
and tap a file you want to send.
Tip
Sending image files
You can select a method of sending data in the dialog box.
(The dialog box below may not be displayed depending on your operating
environment)
Sending Date Book data or Address data
Tap schedule data or address data you want to send, tap the Menu
icon, and then select Send Event (for “Date Book”) or Send
Address (for “Address”) from the menu.
82
2
Send a file.
After the Bluetooth Discovery dialog box is displayed, the list of
Bluetooth compatible CLIÉ handhelds within a range of the
communication area is displayed on the Discovery Results dialog box.
Tap to select a CLIÉ handheld to which you want to send data.
b
The Bluetooth Progress dialog box will be displayed on both CLIÉ
handhelds. Follow the on-screen instructions.
Tip
If you have renamed a target Bluetooth™ compatible device registered on CLIÉ
handheld, the device may be listed in the previous name when you detect target
Bluetooth™ compatible devices.
In this case, follow the procedure below.
1 Tap the Menu
icon from the Bluetooth Preferences screen (page 81).
2 Tap Disable device name cache from the Options menu.
3 Detect target Bluetooth™ compatible devices.
Note
To view or edit received data/files, applications supporting each data/file must be
installed on the CLIÉ handheld.
83
®
Performing a wireless HotSync operation
with a computer
If you are using a Bluetooth compatible computer, you can perform a wireless
®
HotSync operation between your CLIÉ handheld and computer.
®
b For details, refer to “Exchanging and updating data using a HotSync operation
®
®
(Other HotSync operations) : Performing a HotSync operation using the
Bluetooth™ function” in the “Handbook.”
For information about Bluetooth™ compatible computers, refer to the Sony CLIÉ
handheld Support website (http://www.clie-link.com).
Using the Bluetooth function between your
CLIÉ handheld and other Bluetooth
compliant devices
You can make full use of the Bluetooth function between your CLIÉ handheld
and other Bluetooth compliant devices.
84
Using applications
This chapter describes how to use add-on applications and the “CLIÉ Application Manual.”
For details about add-on applications, refer to the manuals for each add-on application.
About add-on applications
Applications are divided into three types as follows:
• Applications already installed on your CLIÉ handheld
• Applications you need to install on your CLIÉ handheld
For details about using the Installation CD-ROM, follow the procedure on
page 87.
• Applications you need to install on your computer
Using CLIÉ Application Manual
Manual” installed on your computer.
Notes
•
•
Prior to using applications, refer to “Installing the software on your computer” on page
64 to install the Palm™ Desktop for CLIÉ software. The “CLIÉ Application Manual”
will be installed at the same time.
The “CLIÉ Application Manual” requires “Microsoft Internet Explorer Version 5.0”
or later to be displayed properly.
85
Opening CLIÉ Application Manual
1
Double-click the CLIÉ info icon on the Windows desktop.
“CLIÉ info” window is displayed.
2
Select the manual by following the on-screen
instructions.
Tips
•
•
To close the “CLIÉ Application Manual,” click the
corner in the CLIÉ Application Manual window.
You can minimize the CLIÉ Application Manual window by clicking the
icon in the top right-hand
icon
in the top right-hand corner in the window. The minimized window can be reopened
by clicking the CLIÉ Application Manual button in the task bar.
You can operate other software while the CLIÉ Application Manual window is
displayed on the Windows desktop.
•
86
Installing add-on applications on your CLIÉ
handheld
You can install applications with the supplied Installation CD-ROM by
following the procedure below.
Prior to installing applications, install the Palm™ Desktop for CLIÉ software
on your computer with the supplied Installation CD-ROM and connect the
cradle to your computer.
Note
The add-on applications are designed to operate on PEG-NZ90 only. Compatibility
with other CLIÉ handheld or Palm OS PDAs is not guaranteed.
1
Quit all applications running on the Windows®
operating system.
2
Insert the installation CD-ROM (Installation CD-ROM
Ver1.0 for PEG-NZ90 English) into the CD-ROM drive of
your computer.
The installation launcher window appears.
If the installation launcher window does not appear, click the CD-ROM
drive icon in Windows Explorer, and then double-click Setup.exe.
3
Click Next.
Install your preferred software. You can choose between CLIÉ audio
software, CLIÉ imaging software, CLIÉ internet software, CLIÉ utilities,
CLIÉ data management and demo software.
4
Follow the on-screen instructions to complete the
installation.
5
Click Exit.
The installation ends.
6
Press the HotSync button on the cradle, to install the
application on your handheld.
! The applications are designed to operate on this model only.
Compatibility with other CLIE handhelds
87
Introducing add-on applications
Taking images
Application to be used
CLIÉ handheld
CLIE Camera S
Keyword
JPEG (DCF) format
Summary
For taking images using the built-in camera of the CLIÉ handheld.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Importing image/movie files from
your computer
Application to be used
PC
Image Converter
Keyword
JPEG (DCF) format, Movie Player format
Summary
For converting the formats of pictures on your computer so that they can be viewed on your
CLIÉ handheld.
Preparation for use:
Must be installed
Requires a “Memory Stick” media
Installation CD-ROM Menu
“CLIÉ Imaging Software”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
88
Importing movie files from your
computer
Application to be used
PC
Giga Pocket Plugin
Keyword
Movie Player format
Summary
For converting the formats of movie files on your computer so that they can be viewed on
your CLIÉ handheld.
Preparation for use:
Must be installed
Requires a “Memory Stick” media
Installation CD-ROM Menu
“CLIÉ Imaging Software”
b For details, refer to Help files of the “Giga Pocket Plugin” installed on your computer.
Viewing/Playing back a file after
searching from the list
Application to be used
CLIÉ handheld
CLIE Viewer
Summary
For managing and displaying image files, movie files, handwriting memos and Voice memo files.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Managing image files in albums
Application to be used
CLIÉ handheld
CLIE Album
Summary
For managing image files saved on your CLIÉ handheld or “Memory
Stick” media, in an album format.
You can print out contents of the “CLIE Album” screen or view them on a television.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
89
Managing image files taken with
your CLIÉ handheld on your computer
Application to be used
PC
PictureGear Studio
Summary
For importing image files from your CLIÉ handheld to your computer and managing the
image files.
•
•
•
•
Creates albums or binders for image files
Imports image files to the computer and manages the image files
Prints out labels
Exchanges data created using the CLIE Album application between your CLIÉ handheld
and computer.
Preparation for use:
Must be installed
Requires a “Memory Stick” media
Installation CD-ROM Menu
“CLIÉ Imaging Software”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Displaying image files automatically
Application to be used
CLIÉ handheld
PhotoStand
Keyword
JPEG (DCF) format
Summary
For displaying automatically image files one after the other.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
90
Editing images
Application to be used
CLIÉ handheld
Photo Editor
Keyword
JPEG (DCF) format
Summary
For drawing pictures on an image file saved on your CLIÉ handheld. You can also draw
pictures on a new blank canvas.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Recording movies
Application to be used
Movie Recorder CLIÉ handheld
Keyword
Movie Player format (movie formats shot with your CLIÉ handheld
or converted using the Image Converter software)
www.aibo.com
Summary
For recording movies using the built-in camera of the CLIÉ handheld.
Preparation for use:
Installed Requires a “Memory Stick” media
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Playing back movies
Application to be used
Movie Player CLIÉ handheld
Keyword
Movie Player format (movie formats shot with your CLIÉ handheld
or converted using the Image Converter software), MPEG Movie
format (MPEG1 format movie files shot with a Sony Digital Still
Camera or Handycam),
www.aibo.com
Play List, Repeat function, Index function
Summary
For playing back movies recorded with the built-in camera of the CLIÉ handheld or playing
back movies on your CLIÉ handheld using “Image Converter” software on your computer.
Preparation for use:
Installed Requires a “Memory Stick” media
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
91
Playing back Macromedia® Flash™
Application to be used
Macromedia Flash Player 5
CLIÉ handheld
Keyword
swf format
Summary
For playing back the Macromedia Flash contents.
Some Flash contents for computers may not be played back normally on your CLIÉ handheld.
Preparation for use:
Installed Requires a “Memory Stick” media
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Listening to music with your CLIÉ
handheld
Application to be used
Audio Player CLIÉ handheld
Keyword
MP3, ATRAC3
Summary
For playing back music files saved on a “Memory Stick” media.
Preparation for use: Installed
Needs to be connected to your computer
Requires a “Memory Stick” media
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
92
Transferring music files to your CLIÉ
handheld
Application to be used
SonicStage 1.5 PC
Keyword
ATRAC3
Summary
For managing and creating music files to be played back with your CLIÉ handheld in your
computer.
The application is also used for transferring music files to a “Memory Stick” media.
Preparation for use:
Must be installed
Installation CD-ROM Menu
“CLIÉ Audio Software”
b For details, refer to the “CLIÉ Application Manual” and Help files of “SonicStage” on your computer.
Recording voice memo
Application to be used
Voice Recorder CLIÉ handheld
Summary
For recording and playing back a voice memo using the built-in
microphone of your CLIÉ handheld.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Managing addresses and
telephone numbers
Application to be used
Address CLIÉ handheld
Summary
For entering and editing Address information such as names, addresses or telephone numbers.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
93
Managing schedules and events
Application to be used
Date Book CLIÉ handheld
Summary
For managing schedules and events such as meetings or business trips.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Managing tasks and things to do
Application to be used
To Do List CLIÉ handheld
Summary
For displaying tasks that you want to be reminded of later. You can
assign priority to any task.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Taking memos
Application to be used
Memo Pad CLIÉ handheld
Summary
For taking memos or displaying documents created on your computer.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Taking handwritten memos using
the stylus
Application to be used
CLIE Memo CLIÉ handheld
Summary
For taking handwritten memos using the stylus.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
94
Using the calculator
Application to be used
Calculator CLIÉ handheld
Summary
For calculating with your CLIÉ handheld. You can save and recall
calculations with the calculator’s memory.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Sending and receiving e-mail
messages
Application to be used
CLIE Mail CLIÉ handheld
Summary
For sending and receiving e-mail messages on your CLIÉ handheld.
Preparation for use:
Must be installed
Installation CD-ROM Menu
“CLIÉ Internet Software”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Browsing websites
Application to be used
NetFront v3.0 for CLIE CLIÉ handheld
Keyword
Websites, Internet, WWW browser
Summary
For browsing websites with your CLIÉ handheld.
Preparation for use:
Must be installed
Installation CD-ROM Menu
“CLIÉ Internet Software”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
95
Using as a remote control
Application to be used
CLIE Remote Commander
CLIÉ handheld
Keyword
Beaming
Summary
For using your CLIÉ handheld as a remote control.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Displaying the worldwide local
time
Application to be used
World Alarm Clock
CLIÉ handheld
Summary
For displaying the worldwide local time. You can also use the application as an alarm clock.
Preparation for use:
Must be installed
Installation CD-ROM Menu
“CLIÉ Utilities”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Exchanging data between your
CLIÉ handheld and “Memory
Stick” media
Application to be used
CLIE Files CLIÉ handheld
Summary
For exchanging data (copy, move, delete) between your CLIÉ handheld and “Memory Stick”
media inserted in the CLIÉ handheld or for editing data on your “Memory Stick” media.
Preparation for use:
Installed Requires a “Memory Stick” media
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
96
Making a backup on a “Memory
Stick” media
Application to be used
Memory Stick Backup
CLIÉ handheld
Summary
For making a backup of the application or data in a “Memory Stick” media.
Preparation for use:
Installed Requires a “Memory Stick” media
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Using a “Memory Stick” media in
your CLIÉ handheld on a computer
Application to be used
Memory Stick Import CLIÉ handheld
Memory Stick Export
PC
Summary
For installing application or copying data from your computer to a “Memory Stick” media in
®
your CLIÉ handheld without using a HotSync operation.
Requires a “Memory Stick” media
Preparation for use:
Memory Stick Import: Installed
Memory Stick Export: Must be installed
Installation CD-ROM Menu
“CLIÉ Data Management”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Customizing the sound settings
Application to be used
Sound Utility CLIÉ handheld
Summary
For managing the audio data converted with Sound Converter 2. The
audio data files are transferred from your computer to your CLIÉ handheld via a HotSync
operation.
®
Preparation for use:
Installed
Needs to be connected to your computer
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
97
Sending audio data to your CLIÉ
handheld
Application to be used
Sound Converter 2 PC
Keyword
WAVE (PCM) format, MIDI (Standard MIDI File Format 0/1) format
Summary
For converting the audio data of WAVE (PCM) format or MIDI format in your computer to
audio data of the CLIÉ handheld format.
Preparation for use:
Must be installed
Installation CD-ROM Menu
“CLIÉ Data Management”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
Viewing computer documents on
your CLIÉ handheld
Application to be used
Picsel Viewer for CLIE CLIÉ handheld
Keyword
doc format, xls format, ppt format, txt format, JPEG format, GIF
format, PNG format, BMP format, PDF format, HTML format,
MHTML format
Summary
For viewing computer documents such as Microsoft Word/Excel data on your CLIÉ
handheld.
Preparation for use:
Must be installed
Requires a “Memory Stick” media
Installation CD-ROM Menu
“CLIÉ Utilities”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
98
Exchanging data with Microsoft®
Outlook
Application to be used
Intellisync Lite PC
Summary
For exchanging the data between Microsoft Outlook/Lotus Organizer and Date Book,
Address, To Do, etc., of the CLIÉ handheld.
Preparation for use:
Must be installed
Needs to be connected to your computer
Installation CD-ROM Menu
Select Palm Desktop for CLIÉ from CLIÉ Basic Software, and follow the
on-screen instructions.
b For details, refer to the “CLIÉ Application Manual” and Help files of “Intellisync Lite” installed
on your computer.
Sending/Receiving messages and
data via a connected GSM
wireless device
Application to be used
SMS CLIÉ handheld
Summary
For sending/receiving messages and data from your CLIÉ handheld via a connected GSM
wireless device, such as a mobile phone.
Preparation for use:
Installed
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
99
Operating the digital video camera or
digital still camera with the CLIÉ
handheld as a remote controller
Application to be used
Remote Camera CLIÉ handheld
Summary
To control the Bluetooth built-in digital still camera (DSC-FX77)*.
Preparation for use:
Must be installed
Installation CD-ROM Menu
“CLIÉ Imaging Software”
b For details, refer to the “CLIÉ Application Manual” installed on your computer.
* Cannot be purchased in some locations
100
Troubleshooting
This section describes how to solve common problems you may encounter when using
your CLIÉ handheld.
Preventing problems
Making a backup is recommended
We recommend that you make a backup of your data in case of any unexpected
trouble. Backing up your data will ensure that it will be saved on the CLIÉ
handheld even when you have to perform a hard reset.
Making a backup using the Memory Stick Backup
application
You can make a backup on the “Memory Stick” media using the supplied
Memory Stick Backup application. This is the most convenient way to make a
backup.
b “Memory Stick” media (optional) is required.
For details, refer to “Backing up your Sony CLIÉ handheld data” in the “Handbook.”
®
Making a backup using the HotSync operation
The data of your CLIÉ handheld is backed up on your computer every time you
®
perform a HotSync operation. You can lose the data in your CLIÉ handheld
®
when you perform a hard reset. But, if you make a backup with the HotSync
operation, you can restore any data previously synchronized with your
®
computer during the next HotSync operation.
However, you cannot make a backup for the following applications or data
®
using the HotSync operation.
• Applications or data installed from “Memory Stick” media or beamed.
• Some applications and driver files added later, or some data in applications.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
101
For details on applications that cannot be backed up, refer to manuals for each
application.
If you want to make a complete backup, use the Memory Stick Backup application.
®
For details on HotSync, refer to “Exchanging and updating data using a HotSync
operation” in the “Handbook.”
Solving problems
Should you encounter problems, please follow the procedure below.
Sony recommends that you make a note of displayed messages or alerts to find
the key to solve the problem.
Step 1 Refer to “Troubleshooting Q&A” or
manuals for each application.
• Read “Troubleshooting Q&A” carefully.
Step 2 Refer to the Sony CLIÉ handheld Support
website.
On the Sony CLIÉ handheld Support website
(http:/www.clie-link.com), you can see information for the answers to
frequently asked questions (FAQ), download provisions of latest
programs, information on how to connect peripheral devices etc.
Note
®
Thousands of third-party add-on applications are available for the Palm OS platform.
Sony does not support third-party applications. If you have a problem with a third-party
application, contact the developer or publisher of that software.
102
Getting Help
Intellisync Lite:
Support information:
http://www.pumatech.com/sonyclie/
For CLIÉ handheld and applications other than the
above mentioned:
Sony offers several support options for your CLIÉ handheld. If you have
questions or problems, please refer to one of the following for a solution:
■ Read This First (this guide), Handbook (supplied),
Troubleshooting (supplied), Getting Started booklet,
Setup poster (supplied) describes how to use your CLIÉ handheld.
■ Sony CLIÉ handheld support website
http://www.clie-link.com
Provides the latest information on your CLIÉ handheld. On this website,
you will find:
• Frequently Asked Questions (FAQs)
• Online Operating Instructions
• Installation information
• Software updates
• Online knowledge base
■ CLIE Contact List
Opening Hours: Monday-Friday 08:00-18:00 (local time)
Country
Austria
France
Germany
Ireland
Italy
Phone number
0810 00 11 73
08 20 82 05 87
0180 300 06 58
189 092 5010
8488 00772
Netherlands
Switzerland (French)
Switzerland (German)
United Kingdom
020 201 36 94
0844 810139
0844 850138
0845 6014254
Support is available in Dutch, English, French and German.
103
Additional
information
Notes on use
About handling
• Make sure you do not scratch or damage your CLIÉ handheld’s screen or the
®
Graffiti writing area. Always use the supplied stylus or a plastic-tipped
pointer to tap on the screen.
Do not use a real pen, pencil, or other sharp object on the screen.
• Do not expose your CLIÉ handheld to rain or moisture. Should water enter
the circuitry through the buttons and switches, your CLIÉ handheld may be
damaged.
• Your CLIÉ handheld screen is made of glass. Do not drop or expose your
CLIÉ handheld to external shock. Do not carry your CLIÉ handheld in your
back pocket. If you sit down with your CLIÉ handheld in the back pocket,
the CLIÉ handheld may break.
• Avoid using or storing your CLIÉ handheld in locations subject to:
– extremely high temperature, such as inside a car left exposed to the sun, or
near a heater.
– direct sunlight
– high humidity
– excessive dust
• The rubber feet of the cradle may lose their adhesion if they become dirty. If
this occurs, wipe the rubber feet with a soft damp cloth to restore their
adhesion.
About cleaning
• Clean your CLIÉ handheld with a soft, dry cloth.
• Remove the dirt and dust from the camera lens by wiping with a soft damp
cotton swab.
If condensation occurs
Turn off your CLIÉ handheld for approximately one hour to clear condensation
before use. If you leave condensation within the camera lens, you may not be
able to take clear images.
104
Battery considerations
Charging
• It takes approximately 4 hours to charge your CLIÉ handheld when the
battery is empty.
• If you charge your CLIÉ handheld every day, it takes only a few minutes to
charge the battery.
Battery life
Battery life varies depending on the conditions and environment where you use
your CLIÉ handheld, or applications used.
b For details, refer to “Specifications” on page 107.
Conserving the battery
• Turn off the backlight under good lighting conditions.
b For details, refer to “POWER Switch” on page 30.
• Change the automatic power-off time setting so that your CLIÉ handheld
will automatically turn off after a short period of inactivity.
b For details, refer to “Customizing your Sony CLIÉ handheld (Preferences): Setting
the automatic power-off time” in the “Handbook.”
Using peripheral devices
If the caution message that warns of low battery-remaining is displayed while
you use peripheral devices with your CLIÉ handheld, stop using them
immediately and charge your CLIÉ handheld. If you continue operating, data
in your CLIÉ handheld’s memory may be lost.
105
When battery charge gets low
• When battery charge gets low, a caution message appears on the screen, and
operations for “Memory Stick” media or backlight adjustment become
unavailable.
®
If this occurs, perform a HotSync operation to make a backup all the data
of your CLIÉ handheld to your computer. Then charge your CLIÉ handheld
using the cradle to prevent accidental data loss.
• If your CLIÉ handheld does not turn on when you slide the POWER switch,
charge your CLIÉ handheld immediately.
• The remaining battery indicator does not always reflect the actual battery
power remaining. To prevent the battery running out accidentally, charge it
frequently even when it is not fully discharged.
• When the remaining battery indicator reads zero, immediately charge the
battery with the USB cradle or replace with a charged battery.
Do not let the remaining battery indicator read 0
If your battery drains and you leave your CLIÉ handheld in an uncharged state
for an extended period of time, all of the stored data will be erased. Sony
recommends that you charge your CLIÉ handheld frequently.
Others
Your CLIÉ handheld may get warm if turned on for a long period. This is not
malfunction.
106
Specifications
Weight
CLIÉ handheld
Approx. 11 oz (293 g) (including the
supplied stylus and battery)
OS
®
Operating temperature
Palm OS 5 (ver.5.0)
41 ºF to 95 ºF (5 ºC to 35 ºC)
CPU
Audio frequency response
PXA250 200 MHz
20 Hz to 20,000 Hz
Memory
Audio recording format
ATRAC3
16 MB (RAM)
User memory range:
approx. 11 MB
MP3 (~320 kbps)
External input/output
Interface connector
IrDA (1.2)
Sampling frequency
44.1 kHz
Output
IR port for AV control
Bluetooth
Earphone: Stereo mini-jack
Voice encoding/decoding
format
“Memory Stick” slot
Wireless communication slot
(CompactFlash type II)
®
IMA ADPCM (1ch, 4bit)
SP mode (22 kHz),
LP mode (8 kHz)
Display
TFT color display with backlight,
320 × 480 dots, 65,536 colors
Maximum recording time
ATRAC3 format
(when using a 128MB “MagicGate
Memory Stick” media, sold
separately)
Other functions
FM synthesizer
16 chords
Approx. 120 minutes
(bit rate: 132 kbps)
IMA ADPCM sound (monaural)
Monaural Speaker
Approx. 160 minutes
(bit rate: 105 kbps)
Monaural Microphone
Approx. 240 minutes
(bit rate: 66 kbps)
Dimensions (excluding
projections)
7
Approx. 3 × 5 5/8 × /8 inches
(75.0 × 141.0 × 22.2 mm) (w/h/d)
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
107
MP3 format
Playing audio files
(in continuous mode):
Approx. 4 hours
(when playing audio files with the
HOLD switch on)
(when using a 128MB “Memory
Stick” media, sold separately)
Approx. 65 minutes
(bit rate: 256 kbps)
Approx. 2.5 hours
Approx. 170 minutes
(bit rate: 96 kbps)
(when playing audio files with the
HOLD switch off and medium
backlight)
Approx. 130 minutes
(bit rate: 128 kbps)
Recording movie files
(in continuous mode):
Approx. 1 hour
(when recording movie files with
the HOLD switch off and minimum
backlight)
Maximum audio recording
time
(when using a 128MB “Memory
Stick” media, sold separately)
SP mode: Approx. 190 minutes
LP mode: Approx. 520 minutes
Viewing movie files
(in continuous mode):
Power requirements
AC power adapter (supplied):
DC 5.2 V (dedicated connector)
(The supplied AC cord is for AC
220-240V)
Approx. 3 hours
(when viewing movie files with the
backlight off)
Approx. 2 hours
(when viewing movie files with the
backlight on)
Battery:
Smart Lithium Battery Pack
(1,200 mAh)
Recording voice memos
(in continuous mode):
Approx. 6 hours
(when recording movie files with
the HOLD switch on)
Approx. 2.5 hours
(when recording movie files with
the HOLD switch off and
maximum backlight)
Battery life
Operating PIMs:
10 days
(when PIMs, such as Date Book,
are operated for 30 minutes per day
with the backlight off)
6 days
Performing data communication
(in continuous mode):
Approx. 2.5 hours
(when performing data
communication with PEGA-WL100)
(when PIMs, such as Date Book,
are operated for 30 minutes per day
with the backlight on)
Taking image files
(in continuous mode):
Approx. 1 hour
* The battery life span varies depending
on the temperature and conditions of
use.
(when taking image files with the
minimum backlight, no falsh, VGA
size, and Normal mode.)
108
Picture size (when recording)
Camera
Image file: 1600 × 1200,
1600 × 1072 (3:2),
Effective pixels
1280 × 960, 800 × 600,
640 × 480, 320 × 480
(vertical frame),
Approx. 2,000,000 pixels
Image pickup device
320 × 240 dots
1/2.7 inch interlace scan CCD image
sensor (2,110,000 pixels in total)
Movie file: 160 × 112 dots
Formats (when recording)
Image file: JPEG(DCF format)
Movie file: Movie Player format
Lens
F2.8/focal length 5 mm
(35 mm film equivalent f=approx.
33 mm)
Picture size (when viewing)
On the CLIÉ handheld display
Image file: 320 × 480, 320 × 240,
160 × 120 dots
Focus range
AF=0.1 m to ∞
Movie file: 426 × 320, 320 × 240
160 × 112 dots
Flash range
0.5 m to 1.5 m
Formats (when viewing)
Camera finder
Image file: JPEG (DCF format)
Movie file: Movie Player format,
MPEG Movie format
On the CLIÉ handheld display
Image file: 320 × 240 dots
Movie file: 320 × 224 dots
Maximum movie recording
time
Others
White Balance:
(when using 128MB “Memory Stick”
media, sold separately)
Auto, Daylight, Cloudy,
Incandescent, Fluorescent
Picture effect:
Off, B&W, Sepia
Exposure value:
Note that the maximum movie
recording time in continuous
operation is approx. 60 minutes.
V:192/A: 32kbps :
2EV, 1/3EV step
Approx. 70 minutes
Flash mode:
Auto, ON, OFF,
V:96/A: 32kbps :
Approx. 120 minutes
Red-eye reduction ON, OFF
Self-timer function:
10 seconds (for image file only)
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
109
Maximum image file
recording capacity
Bluetooth function
(when using a 128MB “Memory
Stick” media in tne standard mode)
1600 × 1200 dots: Approx. 300 files
1600 × 1072 dots (3:2): Approx. 340
files
Communication method
Bluetooth standard Ver. 1.1
Output
Bluetooth standard Power Class 2
1280 × 960 dots: Approx. 400 files
800 × 600 dots: Approx. 1,000 files
640 × 480 dots: Approx. 1,600 files
320 × 480 dots: Approx. 2,800 files
320 × 240 dots: Approx. 4,000 files
Communication range 1)
Line of sight approx. 10 m
Supported Bluetooth
profiles 2)
Serial Port Profile
Dial-up Networking Profile
LAN Access Profile
Object Push Profile
Operationconfirmed
natwork card
Wireless LAN card SONY
Basic Imaging Profile
PEGA-WL100
Frequency band
2.4 GHz band
(2.4000 GHz - 2.4835 GHz)
Compatible printer
1)
The actual range will vary
depending on factors such as
obstacles between devices,
magnetic fields around a
microwave oven, static electricity,
interference, radiowaveconditions,
reception sensitivity or antenna’s
performance, and operating system
or software application, etc.
Tip
For the latest information, refer to the
Sony CLIÉ handheld Support website
(http://www.clie-link.com) and select
your model.
2)
Bluetooth standard profiles specify
the usage purpose for Bluetooth
devices communicating with each
other.
110
System required on
a computer
You need one of the following
systems installed on your computer to
be able to use the Palm Desktop for
CLIÉ software and software supplied
on the CD-ROM:
• OS: Microsoft Windows 98 Second
Edition, Windows Millennium
Edition, Windows 2000
Professional, Windows XP Home
Edition, Windows XP Professional
• CPU: Pentium II 400MHz or more
(Pentium III 500MHz or more is
recommended)
• RAM: 96MB or more (128MB or
more is recommended, 256MB or
more is recommended for Windows
XP)
• Hard drive space: 200MB (350MB
or more is recommended)
• Display: High Color or more,
800 × 600 dots or more is
recommended
• CD-ROM drive
• USB port
• Pointing device such as a mouse or
touchpad
Design and specifications are subject
to change without notice.
111
INDEX
Opening/Playing Back Files . . . . . . . 62
Selecting/Deleting Files. . . . . . . . . . 63
A
AC adapter . . . . . . . . . . . . . . . . . . . .20
Add-On applications . . . . . . . . . . . . .87
Address . . . . . . . . . . . . . . . . . . . .77, 93
Application manager icon . . . . . . . . .45
Applications
Installing . . . . . . . . . . . . . . . . . . . .87
Quitting. . . . . . . . . . . . . . . . . . . . .47
Using . . . . . . . . . . . . . . . . . . .46, 85
Using CLIÉ Application Manual . . . . .85
Audio Player . . . . . . . . . . . . . . . . . . .92
Audio Remote Control. . . . . . . . . . . .17
D
B
E
BACK Button . . . . . . . . . . . . . . . . . . .33
Basic Operations . . . . . . . . . . . . . . . .28
Using the Jog Dial™ navigator . . . . .29
Using the Stylus . . . . . . . . . . . . . . .28
Battery
Exchanging Date Book and Address
Charging . . . . . . . . . . . . . . . . . . . .20
Considerations . . . . . . . . . . . . . . .105
Inserting . . . . . . . . . . . . . . . . . . . .18
Removing. . . . . . . . . . . . . . . . . . . .19
Brightness adjustment icon . . . . . . . .44
F
G
C
Giga Pocket Plugin . . . . . . . . . . . . . 89
Calculator . . . . . . . . . . . . . . . . . . . . .95
Camera . . . . . . . . . . . . . . . . . . . . . . .32
CAPTURE Button . . . . . . . . . . . . . . . .31
CLIE Album . . . . . . . . . . . . . . . . . . . .89
CLIE Camera S. . . . . . . . . . . . . . . . . .88
CLIE Files. . . . . . . . . . . . . . . . . . . . . .96
CLIE Launcher . . . . . . . . . . . . . . . . . .46
CLIE Mail. . . . . . . . . . . . . . . . . . . . . .95
CLIE Memo . . . . . . . . . . . . . . . . . . . .94
H
Hardware Keyboard. . . . . . . . . . . . . 36
HOLD Switch . . . . . . . . . . . . . . . . . . 33
112
I
N
Icons for switching the Graffiti/Software
Keyboard . . . . . . . . . . . . . . . . . . . . . 45
Image Converter . . . . . . . . . . . . . . . 88
Image Files
NetFront v3.0 for CLIE . . . . . . . . . . . 95
O
Enjoying. . . . . . . . . . . . . . . . . . . . 59
Initial screen . . . . . . . . . . . . . . . . . . 42
Initial settings . . . . . . . . . . . . . . . . . 22
Intellisync Lite . . . . . . . . . . . . . . . . . 99
IR port . . . . . . . . . . . . . . . . . . . . . . . 34
Operating style. . . . . . . . . . . . . . . . . 14
Carrying style . . . . . . . . . . . . . . . . 14
Opened style . . . . . . . . . . . . . . . . . 14
P
J
Photo Editor . . . . . . . . . . . . . . . . . . . 91
PhotoStand . . . . . . . . . . . . . . . . . . . 90
Picsel Viewer for CLIE. . . . . . . . . . . . 98
PictureGear Studio . . . . . . . . . . . . . . 90
POWER LED . . . . . . . . . . . . . . . . . . . 31
Jog Dial™ navigator . . . . . . . . . . . . 29
L
Listening to music . . . . . . . . . . . . . . 74
R
M
Remote Camera . . . . . . . . . . . . . . . 100
Restarting. . . . . . . . . . . . . . . . . . . . . 39
Hard reset. . . . . . . . . . . . . . . . . . . 40
Soft reset . . . . . . . . . . . . . . . . . . . 39
Macromedia Flash Player 5 . . . . . . . 92
Managing addresses and telephone
numbers. . . . . . . . . . . . . . . . . . . . . . 77
Managing Schedules . . . . . . . . . . . . 75
Memo Pad . . . . . . . . . . . . . . . . . . . . 94
Memory Stick Backup . . . . . . . . . . . 97
Memory Stick Export . . . . . . . . . . . . 97
Memory Stick Import . . . . . . . . . . . . 97
“Memory Stick” LED . . . . . . . . . . . . 35
“Memory Stick” media . . . . . . . . . . 72
“Memory Stick” Slot . . . . . . . . . . . . 35
Inserting a “Memory Stick” media . . 35
Removing a “Memory Stick” media . 36
Movie files . . . . . . . . . . . . . . . . . . . . 72
Movie Player . . . . . . . . . . . . . . . . . . 91
Movie Recorder . . . . . . . . . . . . . . . . 91
Movies
S
Setting up a network card . . . . . . . . 80
SonicStage 1.5 . . . . . . . . . . . . . . . . . 93
Sound Converter 2 . . . . . . . . . . . . . . 98
Sound Utility . . . . . . . . . . . . . . . . . . 97
Specifications . . . . . . . . . . . . . . . . . 107
Status bar. . . . . . . . . . . . . . . . . . . . . 43
Enjoying. . . . . . . . . . . . . . . . . . . . 61
Recording movies. . . . . . . . . . . . . . 60
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
113
Index
Stylus. . . . . . . . . . . . . . . . . . . . . .23, 28
Turning off. . . . . . . . . . . . . . . . . . . . 30
T
Taking images . . . . . . . . . . . . . . . . . .49
Assigning a function to the custom button
55
U
Effect . . . . . . . . . . . . . . . . . . . . . .58
EV Adjustment . . . . . . . . . . . . . . . .58
Flash Level . . . . . . . . . . . . . . . . . . .58
Flash mode. . . . . . . . . . . . . . . . . . .57
Focus . . . . . . . . . . . . . . . . . . . . . .58
Image size/quality . . . . . . . . . . . . . .52
Jog Dial . . . . . . . . . . . . . . . . . . . . .58
Locating components on the screen . .50
Red Eye Reduction. . . . . . . . . . . . . .58
Save Settings . . . . . . . . . . . . . . . . .58
Scene mode . . . . . . . . . . . . . . . . . .54
Selecting the location to where the
V
Viewing computer documents . . . . . 79
W
captured images are to be saved . . . .53
Self-timer. . . . . . . . . . . . . . . . . . . .51
Shutter sound . . . . . . . . . . . . . . . . .56
Spot Metering. . . . . . . . . . . . . . . . .58
White Balance . . . . . . . . . . . . . . . .58
Zoom . . . . . . . . . . . . . . . . . . . . . .58
Tapping . . . . . . . . . . . . . . . . . . . .23, 28
Time zone . . . . . . . . . . . . . . . . . . . . .25
Inserting the Network Card . . . . . . . 38
Removing the Network Card . . . . . . 38
World Alarm Clock. . . . . . . . . . . . . . 96
114
For the latest information on support,
check our support website
http://www.clie-link.com
For the latest information on CLIÉ products
and accessories, check
http://www.clieplaza.com
|