17-1111.fm Page 1 Wednesday, July 21, 1999 2:23 PM
Cat. No. 17-1111
Owner’s Manual
CT-502 Flip-Style Handheld
Cellular Telephone
with Silent Vibrating Alert
Please read before using this equipment.
17-1111.fm Page 3 Wednesday, July 21, 1999 2:23 PM
Last Number Redial — lets you quickly review and redial
any of the last 10 numbers that you called.
Scratchpad Memory — lets you temporarily store a number
(even during a call), then easily dial it.
Security Features — to prevent unauthorized phone use,
you can lock the phone (so it cannot be used at all) or set up
to five different levels of service restrictions (so only local
calls can be made, for example).
Multiple Key Answer — lets you set the phone so pressing
one of several keys answers a call.
Ample Talk and Standby Time — the supplied battery pro-
vides about 85 minutes of talk time or 24 hours of standby
time, when fully charged.
Battery and Cellular Signal Strength Meters — easy-to-
read graduated bar graphs let you quickly check the battery
power remaining or the current cellular signal strength.
Automatic Answer — lets you set the phone to answer auto-
matically after two rings (if you are using optional handsfree
equipment, for example).
Two Phone Number Capability — lets you use this one
phone with two different cellular services, with a different
phone number from each.
Handsfree Feature — the phone is preprogrammed to work
with most optional handsfree equipment.
We recommend you record your phone’s Electronic Serial
Number (ESN) here. The number is on the back of the
handset under the battery.
3
17-1111.fm Page 4 Wednesday, July 21, 1999 2:23 PM
TABLE OF CONTENTS
A Look at Your Phone ....................................................... 6
Reading the Status Indicators ...................................... 7
Reading the Display ..................................................... 8
Using the Battery ............................................................... 9
Installing the Battery ..................................................... 9
Charging the Battery .................................................. 10
Checking Battery Power ............................................. 11
Replacing a Battery During a Call .............................. 12
Important Battery Tips ................................................ 13
Basic Operation ............................................................... 14
Turning the Phone On/Off .......................................... 14
Signal Strength/Service Area ..................................... 14
Making a Call ............................................................. 15
Answering a Call ........................................................ 16
Adjusting the Volume ................................................. 18
Making Emergency Calls ........................................... 19
Redialing Numbers ..................................................... 20
Displaying Numbers ................................................... 21
Menu Functions ............................................................... 22
Overview .................................................................... 22
Using the Menu Functions ......................................... 26
Using Memory .................................................................. 36
Storing Speed Dial Numbers ...................................... 36
One-Touch Dialing ...................................................... 39
Speed Recall/Dialing .................................................. 39
Memory Scrolling/Dialing ........................................... 40
Changing Information in a Memory Location ............. 42
Clearing a Memory ..................................................... 43
Using Scratchpad Memory ......................................... 44
Memory Dialing Tips .................................................. 44
Security Features ............................................................ 45
Locking Your Phone ................................................... 45
Using Service Restrictions ......................................... 48
4
17-1111.fm Page 5 Wednesday, July 21, 1999 2:23 PM
Other Features ................................................................. 50
Using the Messaging Functions ................................. 50
Using the Phone with Handsfree Equipment .............. 52
Using the Call Timers ................................................. 53
Selecting the Active Phone Number ........................... 55
Setting the Cellular System Type ............................... 56
Roaming ..................................................................... 59
Using Cellular System PIN Dialing ............................. 59
Using Touch-Tone Services ........................................ 61
Calling Card Dialing .................................................... 62
Resetting the Phone ........................................................ 64
Using Master Reset .................................................... 64
Using Master Clear ..................................................... 65
Troubleshooting ............................................................... 66
Safety Information ........................................................... 67
Traffic Safety .............................................................. 67
Operating Environment ............................................... 67
Emergency Calls ........................................................ 68
FCC Regulations ........................................................ 69
Care and Maintenance ..................................................... 70
Specifications .................................................................. 71
Patent Information ...................................................... 71
Display Message Glossary ............................................. 73
5
17-1111.fm Page 6 Wednesday, July 21, 1999 2:23 PM
A LOOK AT YOUR PHONE
1
2
3
8
ALPHA NUMERIC
4
5
6
7
Retractable Antenna
1.
Extend during a call for optimum performance.
2. Earpiece
Status Indicators
(See “Reading the Status Indicators” on Page 7.)
3.
4.
Alphanumeric Display (Seven-Character LED)
Displays the phone number, name, memory location
number, or message.
Alphanumeric Keypad
5.
Enters call information or programs functions.
6
17-1111.fm Page 7 Wednesday, July 21, 1999 2:23 PM
6. Function Keys
RCL
— Recalls numbers stored in memory.
CLR
— Removes characters or clears functions.
END
— Ends a call or exits the functions menu.
SND — Places or answers calls.
NAME
MENU
— Accesses the memory or functions menu.
FCN
— Selects functions.
STO
— Stores to memory; turns on functions.
PWR
— Turns the phone on and off.
7. Flip Cover
8. Volume Controls
Press to increase or decrease the ringer or earpiece
(during a call) volume levels.
READING THE STATUS INDICATORS
Power/Lock Indicator
• Flashes slowly when the
phone is on and in service.
• Lights steadily when the
phone is locked.
InUse Indicator
Flashes when a call is in pro-
gress.
7
17-1111.fm Page 8 Wednesday, July 21, 1999 2:23 PM
NoSvc (No Service) Indicator
Flashes or lights steadily if the
phone is beyond the range of the
cellular service area, meaning
calls cannot be made or re-
ceived. See “Signal Strength/Ser-
vice Area” on Page 14.
Roam Indicator
Flashes or lights steadily if the
phone is accessing a service
area outside of your home sys-
tem (roaming). See “Roaming” on
Page 59.
READING THE DISPLAY
Your phone’s display provides a full range of messages and
indicators to assist you with the phone’s operation. Since
many of these messages contain more characters than your
phone can display at one time, the phone displays most mes-
sages across more than one display. For example, the phone
displays Signalthen (within about 1 second) MtrOnto in-
dicate that the signal meter display feature is turned on.
Note: When referring to a displayed message, this manual in-
cludes the entire message (such as SignalMtrOn).
For a complete listing of display messages and indicators,
see “Display Message Glossary” on Page 73.
8
17-1111.fm Page 9 Wednesday, July 21, 1999 2:23 PM
USING THE BATTERY
Warning:
A detached battery could cause property damage,
injury, or burns if a metal object (such as a pen spring, bead-
ed chain, or piece of jewelry) contacts the battery’s terminals
and causes a short circuit. Be careful when placing a charged
battery inside a coat pocket, purse, or other container that
might contain metal objects.
Caution:
Nickel metal-hydride (NiMH) batteries must be re-
cycled or disposed of properly. They must not be disposed of
in municipal waste.
INSTALLING THE BATTERY
Latch
Align Here
1. Place the battery flat against the back of the phone and
align the top of the battery below the raised arrows.
2. Slide the battery toward the top of the phone until it
snaps into place.
9
17-1111.fm Page 10 Wednesday, July 21, 1999 2:23 PM
To remove the battery, be sure the phone is turned off, then
press the latch at the top of the battery and slide the battery
toward the bottom of the phone until it stops. Then lift the bat-
tery off the phone.
Note: If you have an extra charged battery and the currently
installed battery becomes low during a call, you can change
the battery without ending the call or losing the connection.
See “Replacing a Battery During a Call” on Page 12.
CHARGING THE BATTERY
The nickel metal-hydride (NiMH) battery supplied with your
telephone is shipped in a discharged state to extend the bat-
tery’s life. It must be fully charged before you can use your
phone.
We recommend that you charge a new battery overnight, but
no longer than 24 hours, using the AC charger supplied with
your phone. Recharging time for the supplied battery is about
3 hours, although the time varies based on the amount of
charge left in the battery. For the recharging time of any other
battery type, see the instructions provided with that battery.
Follow these steps to charge the supplied (or any approved)
battery using the charger supplied with your phone.
1. Install the battery on the phone.
2. Insert the charger’s flat plug into the charging jack on the
bottom of the phone.
Note: The plug fits into the jack only one way. If you
have difficulty inserting the plug, turn it over and try
again. Do not force it!
3. Plug the charger’s power cord into a standard AC outlet.
10
17-1111.fm Page 11 Wednesday, July 21, 1999 2:23 PM
Notes:
•
•
•
You can use the phone while it is charging, but charg-
ing takes longer.
For the fastest charging, be sure the phone is turned
off during charging, if you are not expecting a call.
If the phone is on when you connect the charger, the
phone beeps once and the keypad backlight remains
on until you disconnect the charger.
4. When the battery is fully charged, disconnect the charger
from the AC outlet. Then press in the clips on the sides
of the plug and pull it away from the phone to disconnect
the charger.
CHECKING BATTERY POWER
When battery power becomes low, the phone displays Low
Bat and sounds a warning tone every few seconds. When
power becomes too low for the phone to operate, it automati-
cally turns off. Recharge the battery as soon as possible.
FCN
To check the battery’s charge level at any time, press
GHI
4 . The battery strength meter appears on the display for
about 5 seconds. The more bars that appear on the meter,
the higher the battery’s current charge level. If few or no bars
appear, the battery’s power is low.
Notes:
FCN
GHI
• If you press
4 while the phone is charging, the
phone flashes ChrgingBatteryfor about 5 seconds
instead of the battery strength meter.
11
17-1111.fm Page 12 Wednesday, July 21, 1999 2:23 PM
Note: Rechargeable batteries last longer and perform better
if occasionally allowed to fully discharge. You can do this by
leaving the phone on until it automatically turns off or you can
use the battery discharge feature of any approved accessory
available for your phone. Do not try to discharge the battery
by any other means.
REPLACING A BATTERY
DURING A CALL
If you have an extra charged battery and the currently in-
stalled battery becomes low during a call, follow these steps
to change the battery without ending the call or losing the
connection.
1. Tell the other party on the line what you plan to do (tell
them, for example, that they will hear some noise as you
remove the battery and you will call back if for any rea-
son you lose the connection).
2. Remove the battery, and within 3 seconds, install the
fresh battery. Your call is still on the line.
Note: If you do not complete Step 2 within 3 seconds,
the call disconnects.
12
17-1111.fm Page 13 Wednesday, July 21, 1999 2:23 PM
IMPORTANT BATTERY TIPS
• Use only the supplied charger and use only batteries
designed for this phone.
• You can purchase additional standard or extended
capacity batteries through your local RadioShack store.
• When you are not using the charger, disconnect it from
power. Do not leave the battery connected to the charger
for more than 24 hours, since overcharging could
shorten the battery’s life.
• When the battery is not in use, store it uncharged in a
cool and dark place.
• The battery is a sealed unit with no serviceable parts. Do
not try to open the case.
• For the best results, be sure the battery is at or near
room temperature when you charge it.
• A battery can be charged and discharged hundreds of
times, but it eventually wears out. When the operating
time (talk time and standby time) is noticeably shorter
than normal, get a new battery and recycle or properly
dispose of the old one.
• Do not dispose of batteries in a fire.
• Never use any charger or battery that is damaged or
worn out.
13
17-1111.fm Page 14 Wednesday, July 21, 1999 2:23 PM
BASIC OPERATION
TURNING THE PHONE ON/OFF
PWR
To turn on the phone, flip down the cover then press
.
The phone performs a short self test and sounds a tone or vi-
brates (see “Changing the Alert Type” on Page 29), then the
signal strength meter appears (see “Signal Strength/Service
Area”) and the keypad backlight turns on for about 16 sec-
onds. The phone is ready to use when the green power/lock
indicator begins to flash.
Notes:
The keypad backlight turns on for about 16 seconds
every time you press a key, then it turns off and the display
goes blank to conserve battery power.
PWR
To turn off the phone, press
again. The display goes
blank and the green on/lock indicator turns off.
SIGNAL STRENGTH/SERVICE AREA
Each time you turn on the phone, clear the display, or make a
call, the signal strength meter appears on the display to indi-
cate the strength of the cellular signal currently being re-
ceived. The more bars that appear on the meter, the stronger
the signal.
Notes:
• If few or no bars appear (meaning the signal strength is
weak) and you want to make or receive a call, move the
phone to a different location so the signal strength
increases.
14
17-1111.fm Page 15 Wednesday, July 21, 1999 2:23 PM
• You can disable the signal strength meter so it does not
appear. See “Turning the Signal Strength Meter Off/On”
on Page 26.
If the NoSvc indicator (above the display) turns on, the phone
is outside the cellular service area and you cannot make or
receive calls until you reach an area with service your phone
can use.
MAKING A CALL
1. Extend the antenna, flip open the cover, and be sure the
phone is on (the green power/lock indicator is flashing).
2. Press the number keys to enter the phone number you
want to dial (including the area code, if necessary). The
numbers appear on the display as you press them.
Notes:
CLR
•
•
If you make a mistake, repeatedly press
to delete
CLR
one digit at a time, or hold down
its.
to delete all dig-
The phone can display up to 7 characters at once. If
you enter (or display a message containing) more
than 7 characters, the characters automatically scroll
RCL
off the left side of the display. Press
at any time
to recall the overflow characters. See “A Number
Longer than Seven Digits” on Page 21.
3. Press SND to dial the phone number. The InUse indica-
tor flashes and the phone briefly displays Dialing
then the number called, then the signal strength meter.
END
4. To end the call, press
Note
.
: Closing the cover does not end or disconnect a call.
15
17-1111.fm Page 16 Wednesday, July 21, 1999 2:23 PM
System Busy Message
In addition to the normal busy signal you hear when a num-
ber you call is busy, your phone sounds tones and displays a
message to indicate other situations when it cannot complete
a call.
Tone
Display Shows
Description
Fast Busy
The cellular system is
busy.
SND to
Redial
High/low
The cellular system
could not complete the
call.
SND to
Redial
SND
When either of these conditions occur, you can press
again to redial the number immediately (see “Using Automat-
END
ic Redial” on Page 20), or press
again.
then dial the number
ANSWERING A CALL
When the phone receives an incoming call, it rings or vibrates
(depending on the alert setting — see “Changing the Alert
Type” on Page 29) and Callflashes on the display. To an-
END
swer the call, press SND. To end the call, press
.
Notes:
• Your phone can receive calls even if the antenna is not
extended. For optimum performance or if the signal
strength becomes weak, however, extend the antenna.
16
17-1111.fm Page 17 Wednesday, July 21, 1999 2:23 PM
• To set your phone so you can answer a call by pressing
keys other than just SND, see “Using Multiple Key
Answer” on Page 32.
• If you subscribe to calling line ID service through your
cellular carrier, you can view the calling party’s phone
number on the phone’s display. See “Viewing/Recalling
Messages” on Page 51.
• If your phone receives a call but the signal strength is too
weak to support it, Callappears as usual, but you hear
the phone sound a series of beeps (rather than ringing or
vibrating). The caller hears the standard “not in service”
CLR
message. If this happens, press
the display.
to clear Callfrom
Missed Call Message
If your phone is on and receives a call, but you do not answer
it, Callappears on the display for about 15 seconds after
the calling party hangs up. The next time you press any key
CLR
PWR
END
(except
,
, or
), Call reappears for about 15
seconds to notify you that you missed a call.
CLR
END
To clear Callfrom the display, press
or
.
17
17-1111.fm Page 18 Wednesday, July 21, 1999 2:23 PM
ADJUSTING THE VOLUME
Adjusting the Earpiece Volume
To increase or decrease the earpiece volume during a call,
repeatedly press the top (increase) or bottom (decrease) vol-
ume button on the side of the phone. Each time you press the
button, the volume meter appears on the display for about 8
seconds. The more bars that appear on the meter, the higher
the earpiece volume.
Adjusting the Ringer Volume
To increase or decrease the phone’s ringer volume, when the
FCN
phone is not in use, press
then repeatedly press the top
(increase) or bottom (decrease) volume button on the side of
the phone. Each time you press the button, the phone rings
once and displays the volume meter for about 8 seconds.
The more bars that appear on the meter, the higher the ringer
volume sounds.
Using Mute
To turn off the phone’s microphone during a call so the other
party on the phone cannot hear you (so you can talk privately
FCN
with someone else in the room, for example), press
MNO
6
. Muteappears.
18
17-1111.fm Page 19 Wednesday, July 21, 1999 2:23 PM
FCN
MNO
6
To turn the microphone on again, press
again so
Mutedisappears.
Hint: To help you remember which key to use, note that “M”
MNO
(for mute) appears on the
6 key.
END
Note: Pressing
to end a call also turns the microphone
back on.
MAKING EMERGENCY CALLS
Your phone is preprogrammed to let you dial your local emer-
gency number (such as 911) at the press of a single button,
even if the phone is locked (see “Locking Your Phone” on
Page 45). Before you can use this feature, however, you
must first program the emergency number you want to use in
memory location 01 of your phone. See “Storing Speed Dial
Numbers” on Page 36.
To place an emergency call once you have stored the emer-
1
gency number, simply hold down
for about 1 second.
Emergcyappears and the phone dials the emergency num-
ber.
Important Notes:
• If one-touch dialing is turned off (see “Turning One-
Touch Dialing Off/On” on Page 32), you cannot make
emergency calls using the
1 key.
• When you make an emergency call, give your name and
cellular phone number, as well as the location of the inci-
dent. Remember that your phone might be the only
means of communication at the accident scene. Do not
end the call until you are advised you may do so.
19
17-1111.fm Page 20 Wednesday, July 21, 1999 2:23 PM
• Emergcy does not appear if the emergency display
function is turned off (see “Turning the Emergency Dis-
play Off/On” on Page 33).
REDIALING NUMBERS
Using Last Ten Number Redial
Your phone constantly stores the last 10 phone numbers you
called. To recall and redial one of those 10 numbers, follow
these steps.
RCL
OPER
OPER
0
0
1. Press
. L0’ (location 0) and the most
recent number called flash on the display.
2. To scroll through the last 10 numbers called (L0’, L1’,
#
and so on), repeatedly press
to scroll forward or
to scroll backward.
SND
3. To redial a displayed number, press
.
To exit without redialing a number and clear the display,
CLR
hold down
for about 1 second.
Using Automatic Redial
To automatically redial a number when you get the cellular
system busy signal (when SndtoRedialappears), press
SND
so Redial appears. The phone automatically redials
the number at regular intervals for up to 4 minutes or until the
call goes through.
If the call goes through, the phone rings once (or vibrates, de-
pending on the alert setting) to alert you. Simply begin your
conversation as usual when the other party answers.
20
17-1111.fm Page 21 Wednesday, July 21, 1999 2:23 PM
If the call cannot be completed within 4 minutes (and Sndto
Redialappears again), you can press SND again to repeat
END
the redial cycle or
to end the call.
DISPLAYING NUMBERS
Your Phone Number
To display your phone number at any time (even while a call
RCL
#
is in progress), simply press
.
Notes
:
• If you have two phone numbers programmed into your
phone (see “Selecting the Active Phone Number” on
RCL
#
Page 55), pressing
active phone number.
displays the currently
• Unless you selected the silent scratchpad function (see
“Using Silent Scratchpad” on Page 27), the other party
on the line hears tones if you press these or any other
keys on your phone during a call.
A Number Longer than Seven Digits
You can enter and dial phone numbers of up to 32 digits;
however, the phone can display only 7 digits at once.
To review the overflow digits of a number 8–10 digits long,
RCL
press
press
once. Or, if the number is longer than 10 digits,
twice. The phone displays the overflow digits (first
RCL
to last), up to 7 digits at a time.
21
17-1111.fm Page 22 Wednesday, July 21, 1999 2:23 PM
MENU FUNCTIONS
OVERVIEW
Turning a Function On/Off
Follow these steps to turn any of your phone’s special func-
tions on or off. For a complete description of any function,
see the section that describes that function. The page num-
bers of each of the sections are listed in “Menu Functions
List” on Page 24.
NAME
MENU
FCN
1. Press
to access the functions menu. The first
function’s name and its current status (Onor Off) flash
on the display.
#
2. To select a different function, repeatedly press
to
scroll forward or to scroll backward through the
menu until that function appears.
STO
CLR
3. Press
tion off.
to turn the function on or
to turn the func-
Note:
A few seconds after you display the function name
and status, the phone alternately displays STO-On
then CLR-offas a prompt to remind you what key to
press.
4. To select and turn another function on/off, repeat Steps 2
and 3.
END
To exit the functions menu, press
.
22
17-1111.fm Page 23 Wednesday, July 21, 1999 2:23 PM
Function Status Quick-Review
Several commonly used functions on your phone (such as
the message reminder tone and emergency dialing) are pre-
set to “on” so you can begin using them immediately; howev-
er, you can turn any function on or off. Follow these steps to
quickly review the names of those functions for which the pre-
set (default) status has been changed.
Notes:
• You can set all functions back to their default setting at
one time. See “Using Master Reset” on Page 64.
• If all functions are set to their default setting, only the
current cellular system type setting (such as Home or
ScanAB) appears.
• If your phone is set to use the home cellular system type
(see “Setting the Cellular System Type” on Page 56),
Home always appears as one of the settings during a
quick-review.
FCN
RCL
OPER
WXY
0
9
1. Press
. The abbreviation for the first
changed function (such as SignalMtrOfffor “signal
meter off”) appears on the display.
Note: For a complete list of all functions and their default
settings, see “Menu Functions List” on Page 24.
#
2. Repeatedly press
or
to scroll forward or
backward through the abbreviations for all other
changed functions (if any).
3. The phone automatically exits the quick-review about 8
seconds after you last press a key. To exit sooner, press
END
.
23
17-1111.fm Page 24 Wednesday, July 21, 1999 2:23 PM
Menu Functions List
Function Description and
See
Page
Display Shows
Signal Mtr
Default Setting
Turns off/on the signal
strength meter
On
Off
26
Sets the phone to sound
a tone once each minute
during a call
26
One Min Timr
Indiv Timr
Sets the call timer to dis-
play automatically during
a call
Off
On
1
53
27
28
29
Turns off/on the keypad
tones (heard by the other
party)
Scrpad Tone
Ringer Style
Ring Or Vib Sel
Sets the phone to use
one of nine different
ringer styles
Sets the phone to vibrate
or ring only, both vibrate
and ring, or only display
Call (instead of ring or
vibrate) to alert you of a
call
Ring
Only
Turns off/on the keypad
tones (that you hear)
On
Off
30
31
Keypad Tone
Auto Ansr
Sets the phone to auto-
matically answer after
two rings
Sets the phone to answer
a call when you press
one of several keys
Off
32
MultKey Ansr
24
17-1111.fm Page 25 Wednesday, July 21, 1999 2:23 PM
Function Description and
See
Page
Display Shows
Auto Lock
Default Setting
Sets the phone to auto-
matically lock when you
turn power on
Off
46
Turns off/on one-touch
dialing
On
On
On
32
33
33
Turbo Dial
Emergcy Call
Number Pref
Turns off/on the emer-
gency dialing display
Can be turned off so the
phone displays the speed
dial name (instead of the
number) first
Sets the phone to alert
you of a call using a
unique tone (compatible
with optional call-forward-
ing service)
Off
34
35
Call Rcv
Sets the phone to alert
you of messages
On
Remind Msg
received (with optional
messaging services)
(Function not available
on this phone)
N/A
N/A
59
Select
Languag
Sets the phone to auto-
matically send a cellular
system PIN with every
call
Inac-
tive
PIN InActiv or
Activ
25
17-1111.fm Page 26 Wednesday, July 21, 1999 2:23 PM
USING THE MENU FUNCTIONS
Turning the Signal Strength Meter Off/On
Your phone is preset to display the signal strength meter
each time you turn on the phone, clear the display, or make a
call; however, you can set the phone so it does not display
the meter. Follow these steps to turn the signal strength
meter off or on.
NAME
FCN
MENU
1. Press
2. Press
3. Press
. SignalMtrOnor Offflashes
CLR
STO
so Offappears or
so Onappears.
END
to exit the functions menu. If you turned off
the signal strength meter, on appears on the display
instead of the signal strength meter.
Turning the Call-Time Reminder Tone Off/On
The call-time reminder function lets you set the phone to
sound a subtle tone 40 seconds after you place or answer a
call, then once every minute after that, to remind you of how
long you have been on the phone. Follow these steps to turn
the call-time reminder tone off or on.
NAME
FCN
MENU
1. Press
2. Press
3. Press
4. Press
.
#
once so OneMinTimrOffor Onflashes.
CLR
STO
so Onappears or
so Offappears.
END
to exit the functions menu.
26
17-1111.fm Page 27 Wednesday, July 21, 1999 2:23 PM
Turning the Automatic Call Timer On/Off
To track how long you are on the phone, you can set your
phone to automatically display the time (minutes and sec-
onds) you spend on each call. Follow these steps to turn the
automatic call timer on or off.
Note: If you turn on the automatic call timer, the phone dis-
plays the timer at all times during a call. This uses more bat-
tery power than usual.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until IndivTimrOff
or Onflashes.
CLR
STO
3. Press
4. Press
so Onappears or
so Offappears.
END
to exit the functions menu.
Note: Your phone also has a resettable call timer and a cu-
mulative call timer. See “Using the Call Timers” on Page 53.
Using Silent Scratchpad
Your phone is preset to sound dual-tone multi-frequency
(DTMF) tones when you press the number keys during a call;
however, you can set the phone so it does not sound those
tones. This is handy if you plan to use the scratchpad memo-
ry during a call, but you do not want the other party on the line
to hear tones when you press the keys.
Follow these steps to turn the silent scratchpad on or off.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until ScrpadToneOn
or Offflashes.
27
17-1111.fm Page 28 Wednesday, July 21, 1999 2:23 PM
CLR
STO
3. Press
so Offappears or
so Onappears.
4. Press END to exit the functions menu.
Notes:
• In order to send DTMF tones when you use special
phone services (such as bank by phone), you must dis-
able the silent scratchpad function before you place the
RCL
call, or (if silent scratchpad is on) press
SND after
you enter the commands or codes, so your phone sends
those entries as DTMF tones. See “Using Touch-Tone
Services” on Page 61.
• If silent scratchpad is on, you might hear tones when you
press the phone’s number keys, but the other party on
the line does not hear them.
Changing the Ringer Style
Your phone has 9 different ringer styles for you to choose
from (to help you distinguish your phone’s ring from that of
another phone, for example). Follow these steps to change
the ringer style.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until the phone displays
Ringer Style and a number from 1–9 (the last
selected ringer style).
STO
3. Press
. The phone sounds the currently selected
ringer style, then it displays the prompt Select1–9.
Note: If your phone is set to vibrate or make no sound/
movement at all when it receives an incoming call (see
“Changing the Alert Type” on Page 29), your phone does
not sound the ringer tones during this procedure.
28
17-1111.fm Page 29 Wednesday, July 21, 1999 2:23 PM
WXY
1
9
4. Press the number keys (
–
) on the phone’s key-
pad to hear the various ringer styles (or repeatedly press
#
or
each of them).
to scroll backward or forward and hear
5. When you hear the ringer style you want to use, press
STO
to select it. The phone displays Ringer n Set
(where nis the number of the ringer style you selected).
END
6. Press
to exit the functions menu.
Changing the Alert Type
Your phone is preset to ring when it receives an incoming
call. To avoid disturbing others with a ringing sound, howev-
er, you can set your phone to vibrate gently or only flash
CALLto alert you of an incoming call.
Here is a quick chart to help you understand how your phone
works using the different incoming call alert settings.
Display Shows
Description
Ring Only
Phone rings as usual and Call flashes
Vibrate Only
Phone vibrates three times and Call flashes.
Ring On and
Phone vibrates three times then rings and
Vib On
Call flashes.
Ring Off and
Silent alert — phone makes no sound or
Vib Off
movement, but Call flashes.
Notes:
• If the battery is being charged, the phone only rings,
regardless of the alert setting. That way, you can hear
the phone ring (since you are not carrying/wearing it dur-
ing charging).
29
17-1111.fm Page 30 Wednesday, July 21, 1999 2:23 PM
• If the call screening function is turned on, your phone
sounds a different alert tone or number of vibrations. See
“Using Call Screening” on Page 34.
Follow these steps to change the alert type.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
STO
until Ring Or Vib
to enter the change mode.
Selflashes, then press
The current setting (such as RingOnly) appears.
#
3. Repeatedly press
or
until you see the setting
to select that setting.
STO
you want to use, then press
4. Press END to exit the functions menu.
Using the Quick-Set Method — To quickly set your phone
FCN
to ring or vibrate to alert you of an incoming call, press
TUV
8 . The phone displays RingOnly(for ring as usual) or
VibrateOnly(for vibration alert).
Note: Using the quick-set method to set your phone to ring
(RingOnly) automatically disables the silent alert if it is set.
Turning the Keypad Tones Off/On
Your phone is preset to sound a tone each time you press a
key; however, you can turn off the keypad tones. Follow
these steps to turn the keypad tones off or on.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until KeypadToneOn
or Offflashes.
30
17-1111.fm Page 31 Wednesday, July 21, 1999 2:23 PM
CLR
STO
3. Press
so Offappears or
so Onappears.
4. Press END to exit the functions menu.
Note: Regardless of the silent keypad setting, unless you
turn on the silent scratchpad function (see “Using Silent
Scratchpad” on Page 27), the other party on the line hears
tones if you press the keys during a call.
Using Automatic Answer
The automatic answer function lets you set the phone to au-
tomatically answer incoming calls without you having to press
a key. When automatic answer is turned on and the phone
receives a call, it rings (and/or vibrates), then it automatically
answers the call and the InUse indicator begins to flash. Be-
gin your conversation as usual.
Note: To prevent your phone from answering incoming calls
without any easily noticeable indication (such as a ring or vi-
bration), we recommend you not use the silent alert and auto-
matic answer functions at the same time.
Follow these steps to turn the automatic answer function on
or off.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until AutoAnsrOff
or Onflashes.
CLR
STO
3. Press
4. Press
so Onappears or
so Offappears.
END
to exit the functions menu.
31
17-1111.fm Page 32 Wednesday, July 21, 1999 2:23 PM
Using Multiple Key Answer
Your phone is preset to answer an incoming call only when
you press SND; however, you can set the phone to answer a
call when you press any of these keys after the first ring (or
WXY
SND
1
9
vibration):
, any number key (
–
), or either vol-
ume button.
Follow these steps to turn multiple key answer on or off.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until MultKey On or
Offflashes.
CLR
STO
3. Press
4. Press
so Onappears or
so Offappears.
END
to exit the functions menu.
Turning One-Touch Dialing Off/On
Your phone is preset to automatically dial a number stored in
memory locations 01–09 when you hold down that number
key for about 1 second; however, you can disable one-touch
dialing. Follow these steps to turn one-touch dialing off or on.
Important: Disabling one-touch dialing also prevents you
1
from making emergency calls using the
ing Emergency Calls” on Page 19).
key (see “Mak-
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until TurboDialOn
of Offflashes.
CLR
STO
3. Press
4. Press
so Offappears or
so Onappears.
END
to exit the functions menu.
32
17-1111.fm Page 33 Wednesday, July 21, 1999 2:23 PM
Turning the Emergency Display Off/On
Your phone is preset to display Emergcy when you hold
1
down
to make an emergency call; however, you can set
the phone so Emergcydoes not appear (if you did not store
an emergency number in memory 01, for example).
Follow these steps to turn the emergency display feature off
or on.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until Emergcy Call
Onor Offflashes.
CLR
STO
3. Press
4. Press
so Offappears or
so Onappears.
END
to exit the functions menu.
Turning the Number Display Preference Off/On
When you recall a speed dial memory (see “Speed Recall/Di-
aling” on Page 39), your phone is preset to display the num-
ber stored in memory before it displays the name (if any);
however, you can set it to display the name first.
Follow these steps to turn the number preference off or on.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until NumberPrefOn
or Offflashes.
CLR
STO
3. Press
4. Press
so Offappears or
so Onappears.
END
to exit the functions menu.
33
17-1111.fm Page 34 Wednesday, July 21, 1999 2:23 PM
Using Call Screening
The call screening function lets you set your phone so Call
appears and the phone sounds several unique beeps (or vi-
brates) when it receives a call, but you cannot answer the
call. The caller receives the standard “not in service” mes-
sage that they would normally hear when you have the phone
turned off. This function is handy if you want to use your
phone only for outgoing calls.
Note: If your carrier offers no-answer transfer service (like
call forwarding) and you subscribe to that service, turning on
your phone’s call screening function so means Call ap-
pears and the phone sounds several unique beeps (or vi-
brates) when a call is received and is being transferred.
Follow these steps to turn call screening on or off.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until CallRcvOnor
Offflashes.
CLR
STO
3. Press
4. Press
so Offappears or
so Onappears.
END
to exit the functions menu.
34
17-1111.fm Page 35 Wednesday, July 21, 1999 2:23 PM
Turning the Message Reminder Tones Off/On
If your cellular carrier offers a special messaging service, and
you subscribe to that service, your phone is preset to beep
every 2 minutes until you read all new messages, but you can
turn off the tones.
Note: If you do not subscribe to a messaging service, the re-
minder tone function has no effect on your phone.
Follow these steps to turn the message reminder tones off or
on.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until RemindMsgOn
or Offflashes.
CLR
STO
3. Press
so Offappears or
so Onappears.
END
4. To exit the functions menu, press
.
35
17-1111.fm Page 36 Wednesday, July 21, 1999 2:23 PM
USING MEMORY
Your phone has 50 speed-dial memory locations that can
each hold a phone number (up to 32 digits) and a name (up
to 14 characters, including spaces).
STORING SPEED DIAL NUMBERS
Note:
If you are unable to complete Steps 1 and 2 within 8
seconds, the display goes blank to conserve battery power.
END
Press
to recall the display, then try the steps again.
1. Clear the display (if necessary), enter the phone number
STO
you want to store, then press
. The phone displays
Locatn(location) then __.
2. Within 8 seconds, enter the 2-digit memory location
number (01–50) where you want to store the phone
number, or press
to automatically select the first
unused memory location. Alpha or STO appears to
prompt you for the next step.
Notes:
•
•
Remember that your phone uses memory location 01
for one-touch emergency dialing. Store only your local
emergency number (such as 911) in that location.
If you enter an invalid location number (such as 51),
the phone displays Invalid Locatn followed by
the location prompt. Enter a valid location number.
3. To enter the phone number without entering a name,
skip to Step 4.
Or, for each letter of the speed-dial name you want to
DEF
ABC
3
2
enter, repeatedly press the key (
,
, and so on)
to move the
#
that contains that letter, then press
cursor to the next position.
36
17-1111.fm Page 37 Wednesday, July 21, 1999 2:23 PM
WXY
9
For example, to enter the letter Y, press
three times
(since the letter Y is third in the series of letters on that
key).
Notes:
#
•
To store a space, press
letter).
twice (without entering a
•
To enter the letter Q (even though it is not printed on
PRS
the key), press
7
twice. The other letters (P, R,
and S) appear in sequence before/after Q as they do
in the alphabet.
CLR
•
If you make a mistake, repeatedly press
or
to erase each incorrect character, then enter the cor-
rect character(s).
STO
4. When you finish, press
to store the information in
memory. The selected memory location number appears
on the display to confirm the entry.
Note: If you previously stored information in the selected
memory location, or if the phone’s memory is full, the
selected memory location number and Full appear
briefly, then the currently stored information and
Change?flash on the display.
END
To select a different memory location, press
then
STO
, enter the new memory location number (or press
to automatically select the first unused location),
STO
then press
.
To use the selected memory location and replace the
STO
information currently stored there, press
.
37
17-1111.fm Page 38 Wednesday, July 21, 1999 2:23 PM
Storing Speed Dial Numbers in Blocks
To help you organize and easily recall information, you can
store speed dial numbers in “blocks,” so numbers with similar
characteristics (such as family, friends, services, and so on)
are stored together.
The memory blocks in your phone are divided this way:
Block Number
Includes Memory Locations
0
1
2
3
4
5
01 – 09
10 – 19
20 – 29
30 – 39
40 – 49
50
To store a number in a memory block, follow Steps 1–4 in
“Storing Speed Dial Numbers,” but in Step 2, enter the block
number then press
. The phone automatically selects
the first unused memory location in the selected block.
Note: If the block you select is full, Fulland the last memo-
ry location number in that block appear briefly, then the cur-
rently stored information and Change?flash on the display.
STO
END
To select a different memory block, press
ter the new block number, then press
then
, en-
.
To store the number in the last available memory location of
the current block and replace the information currently stored
STO
there, press
.
38
17-1111.fm Page 39 Wednesday, July 21, 1999 2:23 PM
ONE-TOUCH DIALING
To quickly place a call to any number stored in memory loca-
tions 02–09 (without pressing SND), simply hold down that
number key for about 1 second. The InUse indicator flashes
and the phone briefly displays Dialing then the number
called, then the signal strength meter.
SPEED RECALL/DIALING
If you know the memory number you want to use, simply en-
ter that number (such as 06), then press SND to place the
call.
If you know the memory number you want to use, but you
want to review the stored information (just to be sure!) before
RCL
you place the call, press
then enter the memory location
number. The memory number and phone number flash on
the display. To place the call, press SND.
The InUse indicator flashes and the phone briefly displays
Dialing, then the number called, then the signal strength
meter.
Notes:
• To view the name stored in a memory location when the
RCL
phone and memory numbers appear, press
. To view
RCL
the numbers again, press
.
• You can set the phone so it displays the name (instead of
the phone number) first when you select a specific mem-
ory location number. See “Turning the Number Display
Preference Off/On” on Page 33.
39
17-1111.fm Page 40 Wednesday, July 21, 1999 2:23 PM
MEMORY SCROLLING/DIALING
Scrolling by Name (Alphabetical Order)
Your phone stores names in alphabetical order, based on the
first few characters of the name. Follow these steps to scroll
through memory by name.
NAME
MENU
1. Press
ory.
. The phone displays the first name in mem-
Notes:
•
If no names are stored in memory, NoNames
Storedappears.
NAME
MENU
•
If you press
immediately after recalling/dialing
another memory name/number, that memory name
appears first.
2. To scroll forward through all names in memory, repeat-
#
edly press
.
To start scrolling forward from a specific letter of the
ABC
2
alphabet, enter the letter (press
three times to
enter C, for example). The first name that starts with that
letter appears.
Notes:
•
•
•
When you reach the last name in memory (or any time
#
after you first press
), you can press
to
scroll backward through the names.
If there are no names stored under the selected letter
(C, for example), the phone displays NoC’sfollowed
by the next name in memory.
To view the memory number and phone number of a
RCL
selected name, simply press
. To view the name
NAME
MENU
again, press
.
40
17-1111.fm Page 41 Wednesday, July 21, 1999 2:23 PM
SND
3. When you see the name you want to use, press
place the call.
to
Scrolling by Memory Location Number
RCL
1. Press
2. Press
.
OPER
1
0
to start scrolling from the first memory
location, or enter a specific memory number (such as 11)
that you want to start from. The memory number fol-
lowed by ’(to indicate scrolling is active) and the stored
phone number flash on the display.
Note: If the memory number you selected is unused, the
memory number (03’, for example) appears steadily.
#
3. Repeatedly press
or
to scroll forward or
backward through the numbers.
Notes: To view the name stored in the selected memory,
RCL
simply press
. The phone number automatically
reappears after a few seconds.
4. When you see the name or number you want to use,
press SND to place the call.
Scrolling While a Call is in Progress
For convenience (so you can see if you have a caller’s phone
number, for example), your phone lets you scroll through
memory while a call is in progress. Simply follow the steps to
END
scroll by name or memory location number, but press
in-
stead of SND when you finish.
41
17-1111.fm Page 42 Wednesday, July 21, 1999 2:23 PM
CHANGING INFORMATION IN A
MEMORY LOCATION
1. Recall the memory location information.
RCL
2. Press
(if necessary) to display the phone number.
CLR
3. Repeatedly press
to backspace and erase digits,
then enter the correct numbers; or, to simply add digits to
the existing number, enter the additional numbers. Then
STO
press
and enter the two-digit memory number.
AlphaorSTOappears to prompt you for the next step.
Note:
If you enter an invalid location number (such as
51), the phone displays InvalidLocatnfollowed by
the location prompt. Enter a valid location number.
STO
Or, if you want to edit only the name, press
, enter
the two-digit memory location number, then skip to the
next step.
CLR
4. Repeatedly press
or
to erase each character
you want to change, then enter the correct character(s).
Or, to simply add characters to the existing name, enter
the additional characters.
Or, if you do not want to edit the name, skip to the next
step.
STO
5. Press
. The selected memory number and Full
appear briefly, then the phone number and Change?
STO
flash. Press
again to store the edited memory. The
memory location number appears briefly to confirm the
entry.
42
17-1111.fm Page 43 Wednesday, July 21, 1999 2:23 PM
CLEARING A MEMORY
With a name
number
— Follow these steps to clear a
and
memory that has a name and phone number (or only a name)
stored in it.
NAME
MENU
1. Press
to display the first name stored in memory,
#
then repeatedly press
until the name you want to
clear appears.
CLR
2. Press
. Clear?appears.
STO
3. To clear the selected memory, press
. The selected
memory location number appears, confirming the entry.
END
To exit without clearing the selected memory, press
.
Only a Number
— Follow these steps to clear a memory that
has only a phone number stored in it.
CLR
STO
1. Press
, then enter the 2-digit memory location
number you want to clear. Alpha or STO appears to
prompt you for the next step.
STO
2. Press
. The memory location number, phone num-
ber, then Full briefly flash. Then the phone number
and Change?flash.
STO
3. To clear the selected memory, press
. The selected
memory location number appears, confirming the entry.
END
To exit without clearing the selected memory, press
.
43
17-1111.fm Page 44 Wednesday, July 21, 1999 2:23 PM
USING SCRATCHPAD MEMORY
Your phone’s scratchpad memory lets you temporarily store a
telephone number on the display during a call. This is handy,
for example, when someone gives you a number during a call
and you don’t have a place to write it down.
To store a number in the scratchpad memory during a call,
simply press the keys to enter that number. After you press
END
to end the call, you can press SND to immediately dial
the scratchpad memory number.
Note
: Unless you previously selected the silent scratchpad
feature (see “Using Silent Scratchpad” on Page 27), be sure
to tell the other party on the call that they will hear tones as
you press the keys to enter the number.
MEMORY DIALING TIPS
Frequently Dialed Area Codes/Prefixes
To reduce the number of keystrokes you use to dial frequent-
ly called area codes or prefixes, store that area code or prefix
(including the 1, if necessary) in memory. To dial a number
using that memory, simply recall that memory, enter the re-
maining digits of the telephone number you are calling, then
SND
press
to place the call.
Banking or Other Phone Services
For convenience, you can store in your phone’s memory the
touch-tone command sequences you use when calling your
bank or other phone services. See “Using Touch-Tone Ser-
vices” on Page 61.
44
17-1111.fm Page 45 Wednesday, July 21, 1999 2:23 PM
SECURITY FEATURES
LOCKING YOUR PHONE
To prevent unauthorized use of your phone, you can enter a
3-digit code to lock your phone at any time (see “Using Manu-
al Lock”). For added convenience, you can also set the
phone to automatically lock every time you turn it on (see
“Using Automatic Lock” on Page 46).
When the phone is locked, Lockedappears when you press
PWR
any key (except
). When the phone is locked and re-
ceives a call, it rings or vibrates as usual. To answer the call,
you must enter the lock code and then press SND.
Your phone’s preset lock code is 123.
For added security,
you can change the code to one that you can easily remem-
ber. See “Changing the Lock Code” on Page 46.
Note
: If you lock your phone then forget the lock code, you
can enter a 6-digit security code to display the lock code. See
“Displaying the Lock Code” on Page 47.
Using Manual Lock
Follow these steps to lock or unlock your phone at any time.
FCN
JKL
5
1. Press
, then hold down
until the phone dis-
plays Lock?.
STO
2. To lock your phone, press
within 8 seconds.
Locked appears and the green power/lock indicator
lights steadily.
END
To exit without locking the phone, press
.
STO
Note
: If you do not press
within 8 seconds, your
phone automatically exits the lock program without lock-
ing the phone.
45
17-1111.fm Page 46 Wednesday, July 21, 1999 2:23 PM
The phone remains locked until you unlock it. To unlock your
phone, simply enter the 3-digit lock code so Lockeddisap-
CLR
pears. If you make a mistake, press
then try again.
Using Automatic Lock
The automatic lock feature lets you set your phone to auto-
matically lock each time you turn it on. When automatic lock
is turned on, Locked appears after the self test when you
turn on the phone. To use the phone, you must unlock it.
Follow these steps to turn automatic lock on or off.
NAME
MENU
FCN
1. Press
.
#
2. Repeatedly press
or
until AutoLockOff
or Onflashes.
CLR
STO
3. Press
so Onappears or
so OFFappears.
END
4. To exit the functions menu, press
.
Changing the Lock Code
For added security, you can change the lock code, but you
must enter a preset 6-digit security code first. Your phone’s
preset security code is 000000 (you cannot change this
code).
Follow these steps to change your phone’s lock code.
Note: The phone’s display does not change (no characters
STO
appear when you press the keys) until you press
4.
in Step
FCN
OPER
0
1. Press
.
46
17-1111.fm Page 47 Wednesday, July 21, 1999 2:23 PM
2. Enter the 6-digit security code.
3. Enter the new 3-digit lock code you want to use.
STO
4. Press
. The phone displays Changed To and the
new lock code.
CLR
5. Press
play.
to clear the lock code message from the dis-
Displaying the Lock Code
If you change your lock code then forget it, you can use your
phone’s preset security code (000000) to display the current
lock code.
Follow these steps to display the current lock code.
Note: The phone’s display does not change (no characters
RCL
appear when you press the keys) until you press
3.
in Step
FCN
OPER
0
1. Press
.
2. Enter the 6-digit security code.
RCL
3. Press
. The phone displays LocCodeand the cur-
rently set 3-digit lock code.
CLR
4. Press
play.
to clear the lock code message from the dis-
47
17-1111.fm Page 48 Wednesday, July 21, 1999 2:23 PM
USING SERVICE RESTRICTIONS
Your phone is preset to let you (or anyone else) dial any type
of number (local or long distance) and freely access any in-
formation stored in its memory. To prevent unauthorized use
of your phone, however, you can enter your phone’s preset
000000
security code (
) and set any of these varying levels of
service restrictions.
Service
Level
Description
1
Calls can be placed only to numbers
stored in memory locations 01–10 using
speed dialing. Otherwise, the keypad is
locked. The memory cannot be accessed
or changed.
2
3
Calls can be placed only to numbers
stored in memory. Otherwise, the keypad
is locked. The memory cannot be
changed.
Calls can be placed only by direct dialing
using the keypad. The memory cannot be
accessed or changed.
4
5
6
No restrictions (default setting).
7-digit (local) dialing only.
Calls can be placed to numbers stored in
memory or using direct dialing on the key-
pad. The memory cannot be changed.
Note
: Your phone is preset to service level 4.
48
17-1111.fm Page 49 Wednesday, July 21, 1999 2:23 PM
Follow these steps to change the service restriction level on
your phone.
Note: The phone’s display does not change (no characters
STO
appear when you press the keys) until you press
4.
in Step
FCN
OPER
1. Press
0 .
2. Enter the 6-digit security code.
3. Enter the service level (1–6) you want to use.
STO
4. Press
. The phone displays ServiceLeveland
the service level number you entered (such as Ser-
viceLevel5).
CLR
5. Press
display.
to clear the service level message from the
If you selected a service levels other than level 4, the phone
sounds a “no service” fast busy signal when someone tries to
use a restricted feature on the phone. To cancel that busy
signal, press END .
49
17-1111.fm Page 50 Wednesday, July 21, 1999 2:23 PM
OTHER FEATURES
USING THE MESSAGING FUNCTIONS
Some cellular systems provide services that can send up to
three different types of messages to your phone, including
calling line ID, voice mail notification, and short (alphanumer-
ic) messages. Your phone is preprogrammed to work with
these services.
Note:
In order to use these functions on your phone, your
cellular carrier must provide, and you must subscribe to,
these services. Otherwise, selecting or setting them will have
no effect. For more information about these services, call
your cellular carrier.
Overview/Receiving Messages
When your phone is turned on and receives calling line ID,
voice mail notification, or short message data from your cellu-
lar carrier, it alternately displays:
You See
Meaning
xx New
Number (xx) of new messages received
YY Total
Total number (YY) of messages currently
stored in the message stack
Your phone stores each message in a special memory area
called the “message stack.” The message stack can hold up
to 20 messages at once, with messages stored in order from
newest (memory position 1) to oldest (memory position 20).
50
17-1111.fm Page 51 Wednesday, July 21, 1999 2:23 PM
Notes:
• If the message stack is full (20 messages are currently
stored) and the phone receives a new message, it auto-
matically stores the new message and deletes the oldest
message in the stack.
• Your phone does not receive messages while it is turned
off. Contact your cellular carrier to find out how the car-
rier handles undeliverable/queued messages.
Viewing/Recalling Messages
RCL
1. Press and release
, then hold it down for about 1
second. The phone displays the first (newest) message
in the stack.
If the message is a calling line ID message, the phone
briefly displays CIDyy(where yy is the message num-
ber) then the number of the party that called (up to 14
digits).
If the message is a short (text) message, the phone
briefly displays yyNew(where yy is the message num-
ber of a new message) then the message (up to 14 char-
acters).
If the message is voice mail notification, the phone dis-
plays the message data (such as a message number
and number of total/new messages waiting) sent by your
cellular carrier. The type and format of the message wait-
ing information sent varies by carrier — contact your cel-
lular carrier for more information.
Note: If there are no messages in the stack, the phone
displays No Msgs for about 8 seconds then exits the
CLR
message display. To exit sooner, press
.
51
17-1111.fm Page 52 Wednesday, July 21, 1999 2:23 PM
2. To view another message, repeatedly press
(to
#
scroll backwards) or
message appears.
(to scroll forwards) until that
END
3. When you finish, press
tion.
to exit the message func-
Deleting Messages
To delete an individual message, recall that message, then
CLR
hold down
until the phone displays Deleted.
To delete all messages in the stack, while viewing any mes-
CLR
sage, hold down
until the phone displays Deleted
CLR
(briefly) then EraseAll. Then press
again to confirm
the deletion.
END
When you finish, press
to exit the message function.
USING THE PHONE WITH HANDSFREE
EQUIPMENT
Your phone is preprogrammed to work with most optional
handsfree equipment that lets you automatically switch from
handset to handsfree mode in your vehicle when you place
the phone in the handsfree holder.
Some handsfree equipment might require you to turn off
(mute) the phone’s microphone when switching to handsfree,
using the procedure described in “Using Mute” on Page 18.
See the owner’s manual provided with your handsfree equip-
ment for more information, or contact your local RadioShack
store for assistance.
52
17-1111.fm Page 53 Wednesday, July 21, 1999 2:23 PM
USING THE CALL TIMERS
Your phone has three call timers that let you check the length
of your calls (“air time”):
• Individual call timer — times each call you make or
answer in minutes and seconds, and automatically
resets each time you make or answer a call or turn off
the phone. See “Displaying the Individual Call Timer.”
• Resettable call timer — times the calls you make or
answer in minutes, and it can be reset at any time. See
“Using the Resettable Call Timer” on Page 54.
• Cumulative call timer — times all the calls you make or
answer in minutes, and it cannot be reset. See “Display-
ing the Cumulative Call Timer” on Page 54.
Notes:
• Each call timer begins counting when you hear the first
ring (during an outgoing call) or when your phone rings
(or vibrates) to signal an incoming call.
• If your phone receives a call but you do not answer it,
each timer resets to the time it had before it received that
incoming call.
Displaying the Individual Call Timer
The individual call timer tracks each call you make in minutes
and seconds, and automatically resets each time you make
or answer a call or when you turn off the phone.
RCL
To display the individual call timer for the last call, press
#
#
. The air time of your last call (such as 0045to
show 45 seconds) appears for about 15 seconds. Press any
key to clear the display sooner.
53
17-1111.fm Page 54 Wednesday, July 21, 1999 2:23 PM
RCL
#
#
If you press
during a call, the air time of the
call flashes on the display until you clear the display or end
the call.
Note: To set your phone so it displays the individual call timer
automatically, see “Turning the Automatic Call Timer On/Off”
on Page 27.
Using the Resettable Call Timer
The resettable call timer tracks the calls you make or answer
in minutes, and it can be reset at any time. You can reset this
timer to coincide with your cellular billing statement date, for
example, then track your monthly air time.
RCL
#
#
To display the resettable call timer, press
#
. The phone displays Resetbland the number of air
time minutes (such as 00215) accumulated since you last
reset the timer. Press any key to clear the timer from the dis-
play.
FCN
OPER
To reset the timer, with the display clear, press
0
PRS
CLR
7
.
Displaying the Cumulative Call Timer
The cumulative call timer tracks all the calls you make or an-
swer in minutes. It cannot be reset.
RCL
#
#
To display the cumulative call timer, press
,
#
#
. The phone displays Cumul and the number of
air time minutes (such as 00846) accumulated since the first
call was made or answered on your phone. Press any key to
clear the timer from the display.
54
17-1111.fm Page 55 Wednesday, July 21, 1999 2:23 PM
SELECTING THE ACTIVE PHONE
NUMBER
If you subscribe to two cellular services (for example, com-
petitive cellular systems in your area or cellular systems in
different cities), your dealer programs your phone with two
different phone numbers.
If you have two phone numbers programmed into your
phone, the phone displays one of the following messages
each time you turn it on, to indicate which cellular system
type and phone number are currently active.
Phone
Number
Cellular System Type
Display Shows
1
2
1
2
Non-wireline (type A)
Non-wireline (type A)
Wireline (type B)
A1
A2
B1
B2
Wireline (type B)
Note
: To set the cellular system type, see “Setting the Cellu-
lar System Type” on Page 56.
To deactivate the phone number currently selected and acti-
RCL
STO
#
vate the other phone number, press
. The dis-
play briefly blanks, then the currently active number appears
to confirm your selection. To clear the display when you fin-
CLR
ish, press
.
55
17-1111.fm Page 56 Wednesday, July 21, 1999 2:23 PM
Notes:
• Calls can be made on your phone from only one phone
number at a time, and you cannot activate the other
phone number while a call is in progress.
• To receive calls on both numbers at the same time (if you
subscribe to no-answer transfer or call forwarding ser-
vice through your cellular carrier), you can set both num-
bers to forward to the other number if not answered.
Otherwise, a caller who calls the inactive number
receives the standard “not in service” message.
SETTING THE CELLULAR
SYSTEM TYPE
Each cellular market area has two cellular service providers.
One of the providers is designated Provider A and the other
Provider B. When your phone is activated for service, find out
from your dealer whether your cellular provider is type A or B.
Notes:
• Usually, it is less expensive to use the same company for
cellular service when you are in your home city and
when you roam (see “Roaming” on Page 59). To do this,
you need to know whether your cellular service provider
is type A or B in your home city and in each city where
you plan to travel.
• It is possible for a cellular service provider to be (or have
agreements with) Provider A in some cities and Provider
B in others.
56
17-1111.fm Page 57 Wednesday, July 21, 1999 2:23 PM
Your phone’s selectable system registration function lets you
select one of six possible roaming modes:
Roaming Mode Description
— the phone first seeks a home type
Display
Standard Mode
system, then it seeks a non-home type.
If you are using a type A (non-wireline) home system
Std AB
Std BA
If you are using a type B (wireline) home system
— the phone first seeks a non-
Invert Preference Mode
home type system, then it seeks a home type. (Select
this setting while on the fringe of your home area or in
certain roaming situations.)
If your home system is non-wireline (type A):
• Roam flashes rapidly — call on system B
• Roam flashes slowly — call on home type system
• InUse flashes slowly — call on home system
ScanBA
ScanAB
If your home system is wireline (type B):
• Roam flashes rapidly — call on system A
• Roam flashes slowly — call on home type system
• InUse flashes slowly — call on home system
— the phone will not operate outside
your home system.
Home Only Mode
Home
— the phone will operate only within
non-wireline (A) systems.
Scan A Mode
Scan A
Scan B
P Scan
— the phone will operate only within
wireline (B) systems.
Scan B Mode
— the phone automatically scans for one or
SID Mode
more preferred systems to use
one or more sys-
and
tems
to use. System IDs must be preprogrammed
not
by the dealer; preferred system (SID) feature requires
special service (contact your cellular carrier).
57
17-1111.fm Page 58 Wednesday, July 21, 1999 2:23 PM
Displaying the Currently Selected
System Type
To display the system type currently selected on your phone,
RCL
press
. The currently selected system type (such as
StdBA) appears for about 8 seconds. To clear the display
END
sooner, press
.
Selecting the Cellular System Type
Note: If you are unable to complete Steps 2 and 3 within 8
seconds, the display clears without changing the system
type. Start at Step 1 and try again.
RCL
1. Press
. The currently selected system type
appears.
#
2. Repeatedly press
type you want to use.
or
until you see the system
STO
3. To store the displayed system type, press
. The
phone briefly displays Setto confirm your selection.
END
To exit without changing the system type, press
.
58
17-1111.fm Page 59 Wednesday, July 21, 1999 2:23 PM
ROAMING
In some areas, the cellular system’s computer automatically
recognizes roaming telephones. In other areas, you must
contact the service provider before it can recognize your
phone. The operator needs to know your telephone number,
your phone’s ESN (Electronic Serial Number), and how you
plan to pay for your calls. There is normally an additional
charge for roaming calls.
Note
: Your phone’s ESN is under the phone’s battery; how-
ever, the roaming cellular service provider can usually auto-
matically determine your phone’s ESN when you call.
When you roam, the Roam indicator on your phone flashes
slowly when the phone is using a home-type cellular system.
The indicator flashes rapidly when the phone is using a cellu-
lar system that is different from your home system.
USING CELLULAR SYSTEM
PIN DIALING
Your cellular carrier might require that you use a personal
identification number (PIN) when you make calls. This num-
ber assures the cellular system that the person placing the
call is an authorized user.
Contact your cellular service provider to determine if a PIN is
required and obtain the PIN (7 digits or less) to place calls
through the cellular system you subscribe to. If a PIN is re-
quired, follow the steps in “Storing Speed Dial Numbers” on
Page 36 to store your PIN in memory 07, then follow the
steps in “Enabling/Disabling PIN Dialing” on Page 60 to en-
able PIN dialing on your phone.
59
17-1111.fm Page 60 Wednesday, July 21, 1999 2:23 PM
Notes:
• Enable PIN dialing on your phone only if it is required by
your cellular provider.
• You must store your PIN in memory 07, otherwise your
phone cannot properly make calls through your cellular
system.
• If you enter a service area that does not require PIN dial-
ing, disable PIN dialing on your phone.
Enabling/Disabling PIN Dialing
NAME
MENU
FCN
1. Press
to access the functions menu.
#
2. Repeatedly press
or
until PIN InActive
or Activeflashes.
CLR
STO
3. Press
so Active appears or
so InActiv
appears.
END
4. Press
to exit the functions menu.
Making a Call Using Your PIN
1. Dial or speed dial the number you want to call, as usual,
then press SND.
2. When you hear the tones (2 beeps), press SND again.
The phone automatically sends your PIN code to finish
dialing the call.
Note: If you did not store your PIN in memory 07, or you
stored an incorrect PIN, Invalid PIN appears. Be sure
your PIN is correct, then try again.
60
17-1111.fm Page 61 Wednesday, July 21, 1999 2:23 PM
USING TOUCH-TONE SERVICES
To use your cellular phone to control answering machines
and special telephone services (such as bank-by-phone or
voicemail), simply enter touch-tone commands using your
phone’s keypad after the service answers (and when prompt-
ed).
Note
: If the silent scratchpad function is turned on, you must
RCL
press
SND to send the tones after entering each set of
touch-tone commands.
Or, you can store the service’s command sequence in a
memory location. After the service answers (for each se-
quence you want to send), simply recall the memory location
RCL
SND
that contains the command sequence and press
.
Adding a Pause
Some services, such as voicemail, require you to enter an ac-
cess code then wait before entering additional digits. To in-
clude one or more pauses in a sequence when storing it in
FCN
o
so InsertPause flashes, then
SND
memory, press
STO
o
press
. The phone displays
wherever you insert a
pause.
STO
Note
: If you do not press
within 8 seconds, the display
clears. Simply press the key for the next digit you want to en-
ter or store. The characters you previously entered appear
along with the pause you just entered.
When you send a sequence with pauses stored in it, the
phone stops at each place in the sequence where you en-
tered a pause. To send the next group of numbers in the se-
SND
quence, press
again.
61
17-1111.fm Page 62 Wednesday, July 21, 1999 2:23 PM
CALLING CARD DIALING
To use your cellular phone to dial long distance numbers with
a calling card number, you can simply dial as you usually
would (for example, dial 0 and the telephone number then
press SND, then enter your calling card number when you
hear the prompt).
For convenience, your phone lets you store a calling card se-
quence in memory with your long distance carrier’s calling
card PIN. When you use this stored sequence to make a call,
the phone automatically sends the required calling card infor-
mation and prompts you to enter the telephone number you
want to call.
Storing a Calling Card Sequence
1. If you dial a regular phone number (such as a 1-800
number) to start a calling card call, enter that number,
FCN
STO
then enter a pause (press
SND
).
Or, if you dial 0 before the telephone number to start a
OPER
0
calling card call, press
so 0 appears.
so InsertNum‘Nflashes.
STO
FCN
2. Press
SND
#
3. Within 8 seconds, press
so ‘N appears after the
numbers you previously entered. (‘N represents the
place where the phone will prompt you to enter the area
code and number you want to call.)
STO
Note
: If you are unable to press
within 8 seconds,
the display clears. Press any key to recall the display.
4. Enter another pause.
5. Enter your calling card PIN number.
62
17-1111.fm Page 63 Wednesday, July 21, 1999 2:23 PM
STO
6. Within 8 seconds, press
then enter the 2-digit mem-
ory location number (01–50) where you want to store the
card sequence, or press
to automatically select the
first unused memory location. AlphaorSTOappears
to prompt you for the next step.
Note: If you are unable to complete this step within 8
STO
END
seconds, the display goes blank. Press
recall the display and try again.
to
7. Enter the name to describe this calling card sequence
STO
(XYZ LONG DIST, for example), then press
proceed without storing a name, simply press
. To
.The
STO
phone displays the memory location number you
selected to confirm the entry.
Placing a Call Using a Stored Calling
Card Sequence
1. Recall the calling card sequence from memory, then
press SND to dial the call. (Or, if you stored the sequence
in any memory from 02–09, simply hold down that num-
ber for one-touch dialing.) Enter Number appears.
This prompts you to enter the area code and phone num-
ber you want to call.
2. Enter the area code and phone number you want to call,
or recall that number from memory, then press SND. The
phone begins dialing the call.
Note: When you press the keys, the phone sounds dif-
ferent tones than the ones it normally makes.
3. When you hear the prompt, press SND to dial the calling
card PIN (or other information you stored in the calling
card sequence).
Note: Repeat this step for each sequence you stored.
63
17-1111.fm Page 64 Wednesday, July 21, 1999 2:23 PM
RESETTING THE PHONE
USING MASTER RESET
Master reset lets you enter the phone’s preset security code
000000
(
) and reset all of the phone’s special functions to their
default settings (see “Menu Functions List” on Page 24), but
it does not clear any information you stored in memory.
Follow these steps to perform master reset.
FCN
OPER
0
1. Press
.
2. Enter the 6-digit security code twice.
STO
1
3. To reset the phone, press
. The phone dis-
plays Std Setting (standard setting) and begins to
reset.
When the phone finishes resetting (when Std Set-
tingdisappears), you can use it as usual.
Note
: Depending on your phone’s settings, the phone
might take several minutes to reset.
END
To exit without performing master reset, press
.
64
17-1111.fm Page 65 Wednesday, July 21, 1999 2:23 PM
USING MASTER CLEAR
000000
Master clear lets you enter the preset security code (
to do the following:
)
• Reset all of the phone’s special functions to their default
settings (see “Menu Functions List” on Page 24)
• Delete all information stored in memory
• Clear the resettable call timer
Follow these steps to perform master clear.
Caution:
Performing master clear deletes all information
stored in memory.
FCN
OPER
0
1. Press
.
2. Enter the 6-digit security code twice.
WXY
STO
9
3. To clear the phone, press
.
When the phone finishes resetting (when Busy disap-
pears, for example), you can use it as usual.
Note
: Depending on your phone’s settings and the
amount of information stored in memory, Busy might
appear, the phone might sound a continuous beep, and it
might take several minutes to finish clearing.
END
To exit without performing master clear, press
.
65
17-1111.fm Page 66 Wednesday, July 21, 1999 2:23 PM
TROUBLESHOOTING
If the phone’s power does not come on or stay on:
• Make sure the battery is properly installed and charged.
• Be sure that the contacts on the battery are clean. If they
are not, clean them with a soft cloth or pencil eraser.
• The battery charge might be too low for operation. Check
the display and listen for the low battery warning tones.
If the power comes on, but the phone does not work:
• Make sure that the antenna is fully extended.
• Be sure you selected the correct cellular system type
(see “Setting the Cellular System Type” on Page 56).
• Make sure that functions you might have previously
selected (but forgotten) are not causing the phone to
operate differently than you expect it to (see “Function
Status Quick-Review” on Page 23).
• Check the display for error messages.
If you see an error message that is not covered in any section
in this Owner’s Manual, or if your phone does not seem to be
operating properly, contact your local RadioShack store for
assistance.
66
17-1111.fm Page 67 Wednesday, July 21, 1999 2:23 PM
SAFETY INFORMATION
TRAFFIC SAFETY
• Do not use a handheld phone while driving a vehicle. If
using a handheld phone, park the vehicle before taking
or making a call.
• Always secure the phone in its holder; do not place the
phone on the passenger seat or where it can break loose
in a collision or sudden stop.
• Never install a phone alert device that operates your
vehicle’s lights or horn. This is illegal in most areas.
Remember, always put road safety first!
OPERATING ENVIRONMENT
• Remember to follow all special regulations and always
turn off your phone whenever you are required to do so,
or when it might cause interference or be dangerous.
• Any radio transmitting equipment, including cellular
phones, might interfere with inadequately protected
medical devices. Consult a physician or the manufac-
turer of the medical device if you have any questions.
Other electronic equipment might also be subject to
interference.
• As with other mobile radio transmitting equipment, for
your safety, only use your phone in the normal operating
position (held to your ear with the antenna pointing over
your shoulder).
• Turn off the phone while getting gasoline (at a filling sta-
tion). Observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants, or around blasting operations.
67
17-1111.fm Page 68 Wednesday, July 21, 1999 2:23 PM
• Do not store or carry flammable liquids, gases, or explo-
sive materials in the same compartment as a cellular
phone or any of its parts or accessories.
• Only qualified personnel should install or service the
phone in a vehicle. Faulty installation or service might be
dangerous and could invalidate the phone’s warranty.
• Electronic fuel injection systems, electronic anti-lock
braking systems, electronic cruise control systems, and
other electronic systems can malfunction due to the lack
of protection from radio signals. Check regularly that all
cellular phone equipment in your vehicle is mounted and
operating properly.
• Turn off your cellular phone when in an aircraft. The use
of cellular phones in an aircraft might be dangerous to
the operation of the aircraft, disrupt cellular networks,
and is illegal.
Failure to observe these instructions could lead to suspen-
sion or denial of cellular telephone services, legal action, or
both.
EMERGENCY CALLS
IMPORTANT!
This phone, like any cellular phone, operates
using radio signals, cellular, and land-line networks, as well
as user-programmed functions. These factors make it impos-
sible to guarantee connection in all conditions. Therefore, you
should never rely solely upon any cellular phone for essential
communications (such as medical emergencies).
Remember, to make or receive any calls, the phone must be
turned on and in a service area with adequate cellular signal
strength.
68
17-1111.fm Page 69 Wednesday, July 21, 1999 2:23 PM
You might not be able to make emergency calls on all cellular
phone networks or when certain network services or phone
features are set. Check with your local service providers.
FCC REGULATIONS
A cellular phone might cause TV or radio interference, even
when it is operating properly. The FCC can require you to
stop using your cellular phone if you cannot eliminate the in-
terference. If you need assistance, contact your local Ra-
dioShack store.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the condition that this device does not cause
harmful interference.
69
17-1111.fm Page 70 Wednesday, July 21, 1999 2:23 PM
CARE AND MAINTENANCE
Your RadioShack CT-502 Flip-Style Handheld Cellular Tele-
phone with Silent Vibrating Alert is an example of superior
design and craftsmanship. The following suggestions will
help you care for your phone so you can enjoy it for years.
• Keep the phone and all of its parts and accessories out
of the reach of children.
• Keep the phone dry. Liquids might contain minerals that
corrode electronic circuits.
• Do not use or store the phone in dusty, dirty areas. Its
moving parts can be damaged.
• Do not store the phone in hot areas. Temperature
extremes can shorten the life of electronic devices, dam-
age batteries, and warp or melt plastic parts.
• Do not store the phone in cold areas. When the phone
warms up (to its normal operating temperature), mois-
ture can form inside the phone, which could damage the
phone’s electronic circuits.
• Do not drop, knock, or shake the phone. Rough handling
can break internal circuit boards.
• Wipe the phone with a damp cloth occasionally to keep it
looking new. Do not use harsh chemicals, cleaning sol-
vents, or strong detergents to clean your phone.
Modifying or tampering with the phone’s internal components
can cause a malfunction and invalidate your phone’s warran-
ty and void your FCC authorization to operate it. If your
phone is not performing as it should, take it to your local Ra-
dioShack store for assistance.
70
17-1111.fm Page 71 Wednesday, July 21, 1999 2:23 PM
SPECIFICATIONS
Dimensions: ...................................... 55/8 × 23/8 × 13/8 Inches
Weight (with Supplied Battery): ................................... 7.7 oz
(218 g)
Transmitting Power: ................................. 0.6W + 2dB – 4dB
Operating Voltage: ............................................. µ5.2–7.5 DC
Internal battery:......................................................... 6.0V DC
Input to AC charger: ................................................ 110V AC
Frequency Band: ..................................... 824–849 MHz (TX)
869–894 MHz (RX)
Specifications are typical; individual units might vary. Specifi-
cations are subject to change and improvement without no-
tice.
PATENT INFORMATION
This phone is manufactured under one or more of the follow-
ing U.S. patents.
4121218
4124879
4127824
4128740
4138681
4193036
4254382
4302845
4312074
4327319
4329666
4369516
4369522
4378603
4390963
D269873
4389265
4400584
4617520
D286778
4626309
4628529
4629829
4630304
4630305
4633141
4636593
4636741
D288432
4648125
4649543
D288683
4654655
D289156
4662691
4667333
D295975
4751737
D296187
4761621
4764737
D297734
D297735
4777564
Re32768
D299136
4797929
4798975
4800348
4802236
4809356
4811377
4811404
4827226
4965537
4972355
4972432
4972455
4975808
4984290
D314173
D315330
D315346
D315543
D315559
D315565
5004992
D315907
5008925
D316417
D316859
5017856
D327061
5128834
D328302
5142551
5142696
5146620
5148471
5148473
5148961
5150359
5150384
5152006
5157693
5163159
5164652
5166596
5175759
5175874
5261119
5262710
5263052
5276707
5278994
D343173
5280637
D344087
5287553
5287555
5287556
D344511
5301365
5321847
D348880
5349588
5359696
5361400
71
17-1111.fm Page 72 Wednesday, July 21, 1999 2:23 PM
4400585
D270835
D271491
Re31470
4431977
4434461
4455534
4462098
D275951
4484153
4485486
4486624
D276809
4491972
D277667
4504834
D278708
4523155
4546329
4550426
4551696
4564821
D282169
4571595
4573017
4574243
4585957
4602218
D284759
D285439
4616314
4668917
4670747
4672502
4680787
4681476
4683585
4692726
4704588
D292578
4706036
D292920
4710724
4711361
4715063
4716319
4716391
4723305
D294257
4727306
4727583
4730195
4734635
4736277
4737976
4740794
4741018
4741034
4742562
D295627
4746242
D295973
4827507
4829274
4837534
D301476
4843621
4845772
D302015
4851966
4868576
4870686
D303656
4876552
4879533
D305427
4896124
4897873
D305717
4904549
4905288
4905301
D306293
D306441
D306594
4912602
4918732
4922178
4945570
4954796
4959851
4963812
4963843
5018188
5020091
5020092
5020093
5028083
5028859
5029044
5029233
5031028
5036532
5053924
5057762
D320780
5059885
5060294
D322783
D322955
5081674
5083304
D324024
D324388
5095503
D325028
D325583
5109536
D325915
5113436
5117450
5121047
5122480
5122722
D332261
5182749
D332785
5185566
5187809
5193223
5195106
5195108
5201069
5204977
5210793
5214675
5222104
5222251
D337332
5230007
5230093
5233633
5235492
5237257
5239127
5241545
5241548
5241650
5241693
5242767
D339582
5249302
5251331
D340710
5260988
5363071
5365549
D352497
5366826
5375143
5375258
5379324
D354055
D354062
5384825
D356084
5402447
5406146
5406562
D357224
D357457
5410741
D357680
D357681
5428836
D359734
D359735
D359959
5432017
D360632
5438684
72
17-1111.fm Page 73 Wednesday, July 21, 1999 2:23 PM
DISPLAY MESSAGE GLOSSARY
Message
NN’
Description
See
Page(s)
Memory scrolling is active (where
NN is the memory number)
40
o
Shows a pause stored in memory
61
36
Prompts you to press the “alpha”
Alpha or STO
STO
keys or
Automatic answer
Automatic lock
31
46
55
Auto Ansr
Auto Lock
A1
Two-system operation; non-wire-
line system is active, using phone
number 1
Two-system operation; non-wire-
line system is active, using phone
number 2
55
55
55
A2
B1
B2
Two-system operation; wireline sys-
tem is active, using phone number
1
Two-system operation; wireline sys-
tem is active, using phone number
2
Call-time reminder tone
Master clear in progress
26
65
One Min Timr
Busy
Call now being, or was previously,
received
16, 17
Call
Memory prompt to caution before
overwriting previously stored infor-
mation
36, 42
Change?
Memory prompt to caution before
clearing a memory entry
43
Clear?
Emergency call in progress
19, 33
Emergcy
1
(using
)
73
17-1111.fm Page 74 Wednesday, July 21, 1999 2:23 PM
Message
Description
See
Page(s)
No names are stored in memory
40
NoNames
Stored
Emergency dialing display setting
(appears with On or Off)
33
Emergcy Call
Memory is full or the requested
memory block is unavailable
36, 42
Full
Home system-type selected
Automatic timer function
Keypad tone setting
56
53
30
48
45
45
Home
Indiv Timer
Keypad Tone
Level (1-6)
LocCode
Lock?
Service restriction level
Appears before lock code
Appears during manual lock proce-
dure
Phone is locked
45
11
32
18
33
26
Locked
Low Bat
MultKey Ansr
Mute
Battery power is low
Multiple key answer
Microphone is turned off
Number display preference function
Number Pref
on
Appears when display is clear (if
signal strength meter is off)
PIN dialing function is on or off
60
PIN Active or
Inactiv
Automatic redial in progress
20
29
Redial
Ringer alert off (appears with
Vib
Vib
Ring Off
)
Off
Ringer alert on (appears with
29
Ring On
)
On
74
17-1111.fm Page 75 Wednesday, July 21, 1999 2:23 PM
Message
Description
Ring only alert type
See
Page(s)
29
56
Ring Only
Scan A
Non-wireline A system-type
selected
A then B scan system-type selected
56
56
Scan AB
Scan B
Wireline B scan system-type
selected
B then A scan system-type selected
Call screening function
56
34
56
Scan BA
Call Rcv
(System ID) Specific cellular ID
required (system-type selected)
Pref’d SIDs
Signal strength meter
14, 26
56
Signal Mtr
Std Setting
Appears during master reset proce-
dure
Standard non-wireline system-type
selected
56
56
Std AB
Std BA
Standard wireline system-type
selected
One-touch dialing
32
27
29
Turbo Dial
Scrpad Tone
Vib Off
Scratchpad tone
Vibration alert off (appears with
)
Ring Off
Vibration alert on (appears with
29
29
Vib On
)
Ring On
Vibration only alert type
Vibrate Only
75
17-1111.fm Page 76 Wednesday, July 21, 1999 2:23 PM
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in mate-
rial and workmanship under normal use for one (1) year from the date of pur-
chase from RadioShack company-owned stores and authorized RadioShack
franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, IN-
CLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICU-
LAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE
WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PRO-
VIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBIL-
ITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT
TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY
BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or
the exclusion of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and
the RadioShack sales receipt as proof of purchase date to any RadioShack
store. RadioShack will, at its option, unless otherwise provided by law: (a) correct
the defect by product repair without charge for parts and labor; (b) replace the
product with one of the same or similar design; or (c) refund the purchase price.
All replaced parts and products, and products on which a refund is made, be-
come the property of RadioShack. New or reconditioned parts and products may
be used in the performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty period. You will
be charged for repair or replacement of the product made after the expiration of
the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to fol-
low instructions, improper installation or maintenance, alteration, lightning or
other incidence of excess voltage or current; (b) any repairs other than those
provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance
costs; or (f) costs of product removal, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600,
Fort Worth, TX 76102
3/97
We Service What We Sell
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
68P09398A53-A
7/28/97 - RGC
10/97
Printed in the USA
|