Discover your phone
Joystick key
Earpiece
Idle mode - Use
<
&
>
to
Screen
increase or decrease ringer
Idle screen displays the time,
date, network name and battery
level.
volume,
and to access the phonebook.
Navigation mode - Use
or to navigate in the
to validate
+
to access the Call list
-
<
&
>
+
&
-
"Pick up" key
(
menus, and
,
Press to answer a call, or to dial
a number or a name displayed
on the screen. In WAP mode,
corresponds to a softkey.
information.
Call context - Use
increase or decrease earpiece
volume.
<
&
>
to
OK key
In idle mode, press and hold for
,
WAP
@
key
In idle mode, press to access
WAP browser.
"Hang up"
and "On/Off" key
Press to end a call and to switch
your phone on. Press and hold
to switch your phone off.
In WAP mode, corresponds to a
softkey.
)
Alphanumeric keypad
Press keys to enter numbers and
text. Press and hold a key to
activate a programmed hotkey.
Language
Cancel/back key
e
In idle mode, long press
0
to
select
a
language for the
Idle mode - Long press to lock/
unlock the keypad.
Navigation mode - Press to
return to previous menu.
telephone functions.
Microphone
Philips continuously strives to improve its products, and the information and specifications described in this user
guide are subject to change without notice. Philips tries to ensure that all information in this user guide is correct,
but does not accept liability for any error, omission or discrepancy between this user guide and the product
described.
Table of contents
Operate your phone ..........4
The carousel..................................... 4
Text or number entry.................... 4
T9® text Input ..................................... 4
Basic text input ..................................... 6
Reminder ........................................... 7
Read your mobile
1. Getting started................. 8
First steps.......................................... 8
Get started........................................ 8
Insert the SIM card ............................. 8
Enter the PIN code .............................. 9
Set date and time ................................ 9
Copy of the SIM phonebook......... 9
Accept the copy .................................... 9
Refuse the copy ..................................10
Abort the copy ....................................10
First call............................................10
Customise your phone.................10
Charge the battery........................12
Adjust the earpiece volume .............20
Mute the microphone .......................20
Unmute the microphone ..................20
Write in the notepad .........................20
Consult the phonebook .....................20
Record a conversation .......................20
Other features during a call ............21
3. Menu tree........................22
4. Display & images ............24
Introduction.....................................24
Idle screen.......................................14 Images album...................................24
2. Main features..................14
Symbols ...............................................14
Events ....................................................15
Make a call.......................................15
Answer and end a call...................15
See & hear who’s calling:
Display ..............................................25
Screen saver .........................................25
Screen animation ................................26
Animation .............................................26
Backlight ...............................................26
Fotocall.............................................16
Redial and reply..............................16
Flash dial...........................................17
5. Settings
& Quick Settings ............27
Introduction.....................................27
1
Settings.............................................27
Sounds ...................................................27
Display ..................................................29
Security ..................................................29
Time and date ....................................31
Language ..............................................32
Accessories ...........................................32
Hotkeys .................................................33
Voice command ..................................35
Network ................................................35
Call settings ..........................................36
Quick settings.................................38
Quick settings ......................................38
Accessories settings ............................39
Time zone ............................................56
Extras................................................56
Brick game ...........................................56
Call counters ........................................56
Euro ........................................................58
Memory status ....................................58
Calculator .............................................58
Alarm clock ..........................................59
Memo ....................................................59
6. Phonebooks ....................40
Introduction ....................................40
Phonebook ......................................41
Phonebook in SIM card ....................41
Phonebook in phone ..........................41
Add names in the phonebook.....41
In the SIM card ...................................41
In the phone ........................................42
Own number .......................................43
Edit and manage names ................43
In the SIM card ...................................43
In the phone ........................................43
9. E-mail................................60
Introduction ....................................60
Settings .............................................61
Network access ...................................61
E-mail server access ..........................63
Advanced ..............................................64
Write and send e-mails.................65
To one or several recipients ............65
With an attachment ..........................66
Receive and read e-mails..............66
Connect to the server ........................66
7. Calls and messages........46
Introduction ....................................46
Call a number .................................46
Emergency number ............................46
Other number .....................................47
Messages ..........................................48
Send a SMS .........................................48
2
Download e-mails ..............................67
Get and store attachments .............67
Add an e-mail address
to the phonebook ...............................68
Delete e-mails .....................................69
Reply to an e-mail ..............................69
Forward an e-mail ..............................69
mailbox, messaging service, etc.
(DTMF tones) .................................76
Pause and wait characters ...............76
Access your answering machine
(example) .............................................76
Make a second call.........................76
Answer a second call.....................77
10. WAP services...............70
Introduction....................................70 Answer a third call
WAP.................................................70 (Subscription dependent).............78
Launch ...................................................70
Browse ...................................................71
Favourites .............................................71
Last page ..............................................72
Advanced ..............................................72
Access settings ....................................72
Conference Call .............................78
Explicit Call Transfer.....................78
In-call symbols.................................79
Precautions .........................80
Troubleshooting ................84
Glossary ..............................86
Philips authentic
accessories ..........................88
Declaration
11. Other operator
services............................75
Introduction....................................75
GSM strings.....................................75
of conformity .....................90
3
Operate your phone
The carousel
A carousel is a circular loop of icons displayed on the screen, in
which each icon represents a feature or option used to operate
your phone.
Images album
Oper. services
Phonebook
Quick settings
L
All icons don’t fit within the screen; the hidden ones appear when
scrolling or
The first carousel available when you turn on your mobile phone
is called the "main" carousel. You access it by pressing when
<
>.
Settings
Extras
Messages
E-mail
,
in idle mode, and it features the icons shown opposite. A small
icon in the upper left corner of the screen shows your actual
position within the carousel. To access a feature or option, move
Call list
Synchronise
Organiser
Main carousel
<
(anti clockwise) or
>
(clockwise) and press
,
when the
feature or option of your choice is selected. Another sub-
carousel or list will then appear.
L
Pressing
<
or
>
will alternate between two options, such as Activate/
Deactivate, On/Off, Increase/Decrease a value, etc.
Repeat the operation described above and browse carousels and lists until you
reach the desired feature or option. When navigating in a list, a scroll bar
located on the right handside of the screen shows your actual position in the
list. With the navigation key, you can then select or adjust all the functions of
your phone as described in the relevant chapter of this user guide.
Text or number entry
Text can be entered in editing screens in two different ways: by using T9®
predictive Text Input, or basic text input. Two other modes for numbers and
punctuation marks, are also available. Icons appearing on the screen show the
active text mode. You switch from one mode to the other by pressing the
key, and from lower to upper case by pressing the key.
T9® text Input
*
#
What is it?
T9® predictive Text Input is an intelligent editing mode for SMS and e-mail,
including a comprehensive dictionnary. It allows you to quickly enter text. Press
4
only once on the key corresponding to each letter needed to spell a word:
keystrokes input are analysed and the word suggested by T9® is displayed inthe
bottom of the screen. If several words are available according to the keys used,
Tegic Euro. Pat.
App. 0842463
press
built-in dictionary (see example below).
How to use it?
Alphabets and symbols represented by each key are as follows:
0
to browse the list and choose from those proposed by the T9®
To key in letters.
To co nfi r m ent r y.
2
to
9
1
or
#
Short press to clear
one entry, long press
to clear all text.
Short press to
e
0
browse the list of
candidate words, long
press to browse back.
To select the typing
mode.
Shift.
*
#
Example: how to enter the word "home":
1
Press 4 6 6 3 The screen
Good
Home
T9
T9
displays the first word of a list: Good.
2
3
Press
Press
0
1
to scroll and select Home.
to confirm Home.
ENTER TEXT: Eng
Language used: English
Editing mode used: T9®
T9
Press the
*
key to switch to basic mode, to numeric mode, or to punctuation mode
ENTER TEXT: Abc
ENTER TEXT: 123
ENTER TEXT: %!?
While in any text mode, press the
#
key to switch from lower to upper case:
ENTER TEXT: ABC
ENTER TEXT: abc
ENTER TEXT: Abc
5
Basic text input
Although your phone provides you with the T9® predictive Text Input by
default, if you wish to access the basic text input, select “Abc” basic text input
using key. This method requires multiple key presses to reach the desired
character: the letter "h" is the second letter on key , you must press 2
times in order to enter "h". Using this mode requires you press a key as
many times as is equal to the order of the letter.
*
4
4
L
In basic mode, the complete list of characters available for the key you press
appears in the bottom of the screen, allowing you to see each available character
located on this key (see below).
To enter the word "Home" in basic text input mode, you should therefore key
in (GHI) (MNO), (MNO), (DEF).
Press to confirm the completion of the editing.
Letters, numbers and symbols are located on each key as follows:
4
,
4
6
,
6
,
6
6
3
,
3
,
Key
1
2
3
Alphanumeric
Key
8
9
0
Alphanumeric
t u v 8 ü ù
w x y z 9 ø Ω Ξ Ψ
. 0 , / : ; " ’ ! ¡ ? ¿ * + - %
space 1 @ _ # = < > ( ) & £ $ ¥
a b c 2 à ä å æ ç
d e f 3 é è ∆ Φ
g h i 4
Γ
ì
Toggles between the different
Text Input modes.
4
*
#
5 j k l 5
Λ
Switches from lower case to
upper case and vice-versa.
m n o 6 ñ ò ö
Short press to delete one
character, longpresstodeleteall
text.
6
7
e
p q r s 7 β Π Θ Σ
6
Reminder
Switch on/off
Press
Enter your PIN code using the keypad and press
to confirm.
Enter phone number on keypad and press
press to select Call or Call handsfree, then press
to call.
)
to switch on, press and hold to switch off.
Enter PIN
,
or
#
Make a call
(
to dial, or
,
,
(
or
Answer a call
Press
Press
Press
(
)
(
when your phone rings.
End a call
.
View last call
in idle mode.
Quickly access the Phonebook
Quickly access the Call list
Return to previous menu
Return to idle screen
Lock/unlock the keypad
Change the language used
In idle mode, move
In idle mode, move
-
+
.
.
Press
e.
Press and hold
e
.
In idle mode, press and hold
In idle mode, press and hold
e
.
0
, select the language
and press
,.
1. Press
,
<
to access the Carousel.
Access the carousel
Use the phonebook
2. Move
or > to select a function, then press
,
to
enter the sub-menu.
3. Repeat step 2 until you reach the desired function.
1. In idle mode, press
-
.
2. Browse the list by moving
the selected name.
+
or
-
and press
(
to call
7
1 • Getting started
L
Read the safety instructions in the "Precautions" section before use.
First steps
To use your phone, you must insert a valid SIM card supplied by your GSM
operator or retailer. The SIM card contains your subscription, your mobile
number, and a memory in which you can store phone numbers and messages
(see “Phonebooks” page 40).
Get started
Insert the SIM card
1
Press on the two clips on each side of the
back cover of your phone, as shown
opposite (1). Rotate the cover from the
bottom of the phone and remove it (2).
L
Make sure the phone is switched off before
removing the cover.
2
Reomove the SIM card from its holder and
insert inits slot, under the metal clip holder,
until it stops. Be careful that the clipped
corner of the card is in the bottom left
corner as shown opposite.
3
Slide the battery pack into its slots, metallic
connectors downwards, until it stops.
8
4
5
Put the back cover back on your phone:
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until latch catches (2).
Remove the protective film before using the
phone.
Enter the PIN code
1
To switch on the phone, press and hold the
)
key.
2
When you switch on the phone, you may be prompted to enter the PIN
code, which is the 4 to 8-digit secret code of your SIM card to protect it
from abusive use. It is preconfigured and communicated to you by your
operator or retailer. To personalise the PIN code, see “Change codes”
page 30.
L
If you enter a wrong PIN code 3 times, your SIM card is blocked. To unblock it,
you must request the PUK code from your operator.
3
Enter your PIN code. If you make a mistake, press
pressing or
Set date and time
As prompted by the phone at first switch on, set the date by pressing the
appropriate numeric keys (press to erase a number), then press to
validate. Proceed in the same way to set the time.
For complete date and time options, see page 31.
e. Then confirm by
,
#.
e
,
L
Copy of the SIM phonebook
L
If you do not copy the SIM phonebook at very first switch, you will be able to do
it directly from the phonebook menu (see page 41).
If you had a mobile phone before and are using the same SIM card, the card
might contain all or part of your current phonebook. The mobile phone detects
this and a message asks you if you want to copy your SIM phonebook onto the
built-in phonebook (see below). Press
Accept the copy
Press
copy is done, the phonebook located on your phone is automatically set as
e
to cancel or
,
to accept.
,
to accept the copy of the SIM phonebook onto your phone. Once the
Getting
started
9
your default phonebook. To switch back to the SIM phonebook, select
Phonebook In SIM card.
Refuse the copy
If you press the
switch on, the copy isn’t launched and the phonebooks stay unchanged. The
>
e
key to refuse the download of your SIM card contents at
SIM phonebook is the default and you must select Phonebook
settings > Phonebook select > In phone to switch phonebooks.
>
Phonebook
Abort the copy
If you change your mind while the copy has already taken place, press the
key to abort the download of your SIM card contents.
1
e
2
The copy is aborted and the phonebooks only contain the records
downloaded before cancellation of the process.
3
The SIM phonebook is the default and you must select
Phonebook
>
Phonebook settings > Phonebook select > In phone to
switch phonebooks.
First call
1
Enter the phone number (if you make a mistake, press
e) and press
(
.
2
Once connected, your phone emits 2 beeps. To end the call, press
).
Customise your phone
You can customise your mobile phone by removing front and back covers and
replace them with different ones.
L
You must always remove the battery and make sure the phone is switched off
before removing the cover when customising your phone.
1
Press on the two clips on each side of the
back cover of your phone, as shown
opposite (1). Rotate the cover from the
bottom of the phone and remove it (2).
Getting
started
10
2
Remove the battery pack by sliding it
downwards from its slot (1), then lifting it
upwards (2).
3
Then hold the phone upside down and
place your forefinger on the connectors.
Press the two inner clips with your left
fingers as shown opposite (1) and pull the
cover from the top while pushing the inside
part of the phone with your forefinger still
on the connectors (2).
L
Make sure you handle the product with care
when the front is removed, in order not to
damage the joystick key which is then
unprotected, and also try not to touch the screen
Do not turn on your mobile phone when front
and back covers are removed.
4
5
Remove the keypad and place it in the
front cover that will replace the one you
just removed.
Put the new front cover on your phone:
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until the latches catch (2).
Getting
started
11
6
7
Slide the battery pack into its slots,
connectors downwards, until it stops.
Put the back cover back on your phone:
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until the latches catch (2).
Charge the battery
Your phone is powered by a rechargeable battery. A new battery is partially
charged and an alarm will warn you when the battery reaches low.
L
We recommend that you do not remove the battery when the phone is switched
on: you may lose all your personal settings (see information on battery safety,
page 82).
1
Once the battery and battery cover are clipped on the phone, plug the
charger (supplied with the phone, in the box) into the right hand socket
at the base of the phone as shown below.
2
Plug the transformer unit into a main AC power socket with easy access.
The
b
symbol indicates the state of charge:
•
During charging the 4 charge indicators change; Each bar represents
around 25% of charge and it takes around 2.15 hours to fully recharge
your mobile phone.
Getting
started
12
•
•
•
When all 4 bars are steady the battery is fully charged and
you can disconnect the charger
When the battery is charged, remove the connector by pressing the
release button on top of the connector.
Depending on the network and condition of use, talk time goes from
2.30 to 4.30 hours and standby time from 1 to 2 weeks.
.
L
Keeping the charger plugged to the mobile when the battery is fully charged
doesn’t damage the battery. The only way to turn off the charger is to unplug it,
so use an easily accessible AC power socket. You can connect the charger to an
IT supply (Belgium only).
3
If you don’t intend to use your phone for several days, we recommend
you to disconnect the battery.
L
You can use the phone while it is on charge. If the battery is completely flat, the
battery icon will only reappear after 2 or 3 minutes of charging.
Getting
started
13
2 • Main features
Idle screen
After switching your phone on and entering the PIN code (see page 8), your
phone displays the idle screen which means that it is ready to be used. In idle
mode, several symbols can be displayed simultaneously.
L
If the
n
symbol isn’t displayed, the network is not currently available. You may
be in a bad reception area: move to a different location. The phone automatically
returns to idle screen over 2 mn of inactivity.
Symbols
Silent - Your phone will not ring
when receiving a call.
SMS message - You have received a new
message.
Q
V
s
M
Vibra- Your phone will vibrate when
receiving a call.
Voice mail - You have received a new
voice mail.
Keypad lock - Protects the keys
from being pressed accidentally.
Battery - The bars indicate the battery
level (4 bars = full, 1 bar = low).
L
S
B
H
SMS full - Memory for messages is
full. Delete old messages to receive
new ones.
Home zone - A zone designated by your
network operator. Subscriptiondependent,
contact your service provider for details.
Call Forward Unconditional to
number - All your incoming voice
calls arebeing forwarded toa number
other than voice mail.
your phone is
connected to a GSM network
F
f
N a GSM Network :
q
Reception quality : the more bars are
shown the better the reception is.
Memo - A memo or conversation has been
recorded and saved but not yet played.
Call Forward Unconditional to
voice mailbox - All your incoming
calls are being forwarded to voice
mail.
activated.
A Alarm clock
GPRS attach- Your mobile phone is
connected to the GPRS network.
Roaming - Displayed when your phone is
registered to a network other than your
own (especially when you’re abroad).
R
14
Events
Some events may modify the idle screen (missed call, new message, reminder
from the organiser, etc.). In this case, press to access the corresponding
menu or long press to go back to idle.
If you locked your keypad, you must unlock it before being able to access any
,
e
L
e
Make a call
1
In idle mode, enter the phone number using the keypad. To correct an
error, press
For an international call, you can enter the "+" key instead of the usual
e
.
L
international prefix. To do this press and hold
code.
*
before dialling the country
2
Press
(
to dial the number and press
)
to hang up.
L
To learn other ways of making a call, see “Call a number” page 46.
Answer and end a call
1
When receiving a call, the phone can ring and/or vibrate, the incoming call
animation and Incoming call are displayed. Depending on your
subscription and if the caller has permitted this information to be
transmitted, their number may be displayed. If the number is stored in the
selected phonebook (see page 40), then the corresponding name is
displayed instead of the number.
2
3
To answer the call, press
To reject a call, press
page 36), the call is diverted to a number or voicemail.
Notes:
(.
). If you have activated “Call forward” (see
L
•
The phone will not ring if the ringer is deactivated (see page 19).
If you have selected Any Key Answer (see page 38), you can accept a
call by pressing any key (except ).
To hang up, press
•
)
4
).
Main features
15
See & hear who’s calling: Fotocall
L
This feature is only available when you select the phonebook of your phone, not
the SIM phonebook.
The Fotocall feature allows you to:
-
personalize the 10 groups available with a specific name ("Friends",
"Office", "Leasure", etc.), a given picture of the Picture album and a
melody of the Ringer list,
-
link one or several contacts of your phonebook to a group, so that
when the/a person of this group calls you, his/her name appears on
the screen together with the picture of the group he/she belongs to.
The melody defined for this group will also ring.
1
If not done during the start-up procedure (see “First steps” page 8), copy
the content of your SIM phonebook onto your phone: press and select
. Wait
,
Phonebook, Phonebook settings, Copy all to phone and press
for the copy to be completed.
,
2
3
4
Back to the Phonebook carousel, select Group settings, press
select the group of your choice.
,
and
Rename the group to be identified ("Friends", "Kids", etc.) and select the
Melody and the Picture to be associated to this group.
Long press
e
to go back to idle, then
-
to display the content of your
Phonebook. Select a contact you wish to link to this group and press
Then choose Select group and select the group of your choice.
,.
5
When this contact calls you, the Melody and Picture associated to his
group will ring/appear on the screen.
Redial and reply
The phone stores the last 30 numbers in the Call list (called, missed or
received). You can redial or reply to any of these numbers and dial it directly.
The most recent number is displayed first.
1
In idle screen, move
+
to access the Call list, which displays a
chronological list of the last calls received or made. If a number of the Call
list is also in your Phonebook, the corresponding name is displayed.
2
Move
+
or
-
to select the number to redial or reply. Press
to hang up.
(
to dial
the selected number and press
)
Main features
16
Flash dial
Instead of accessing the Phonebook menu and scrolling through the list, you can
link the relevant name card to a hotkey, so that a long press on the chosen key
Flash dial
will directly call him (e.g. long press on
call your office).
2
to call your home or on
3
to
L
You can only program keys
language) and (voice mailbox) are predefined and cannot be changed.
To set a hotkey for flash dial, press to enter the main menu, then select
2
to
9
, as keys
0
(selection of the
1
1
,
Settings > Hotkeys and press
Select a key "Not in use" from
Then select Flash Dial, press
,.
2
,
2
3
to
9
and press
,.
and select a name in the Phonebook
displayed. Press
In idle mode, press and hold the programmed key to dial the associated
entry: the connection is established. Press to hang up.
,
to confirm your choice.
4
)
L
You can also set hotkeys for commands (see “Hotkeys” page 33). Hotkeys can
be changed or deleted at any time.
Voice dial
Voice dial also allows you to quickly call a name from your phonebook: instead
of programming a hotkey, you simply set a voice command by recording a word
that will call the corresponding name when pronounced.
Voice Dial
1
To set a voice tag for voice dial, press
name of your choice in the list and press
Depending on the selected phonebook (see “Phonebooks” page 40):
-
when in idle mode, select the
,.
2
-
-
SIM phonebook: press
phonebook in phone: select Show and press
phone number of your choice if several numbers were stored for
this name and press . Then selectVoice dial in the carousel menu,
and press
When the option Add voice tag? appears, press
,
, select Voice dial and press
,,
,, then select the
,
,.
3
,, then follow the
instructions displayed on the screen. When prompted to record your
voice tag, make sure you are in a quiet environment, choose a short and
simple word and clearly pronounce it.
Main features
17
4
From the Voice dial menu, long press
Press and hold when in idle mode, then say the voice tag
corresponding to the number you want to dial.
To display the list of voice dials you have defined, select Settings, Voice
Commands, Voice dial and press . You can also set a voice tag for a voice dial
e
to go back to idle.
5
,
,
from this menu, by selecting the <New> item, pressing
instructions appearing on the screen.
,
and following the
Voice tags you set for Voice dial can be played, changed or deleted at any time.
You can also set a voice tag for a voice command (e.g. launch calculator or add
organiser event, see page 35).
L
The duration of a voice tag is 2 seconds. Up to 40 voice tags can be defined and
shared between voice dial and voice command.
Clear the call list
To clear your call list, press
,
and select Call list, then Reset. Press
,
to
reset the call list.
Reset
Clear the SMS list
As explained further in this guide, short messages (SMS) sent or received can
also be saved (see “Read SMS” page 49). To clear the whole list at once, press
Reset
,
and select Messages, then press
SMS list.
,. Select Reset and press
,
to reset the
L
Deleting your SMS list is useful to free memory space in order to receive new
messages.
Clear the phonebook
To clear the content of your phonebook at once, press
,
and select
to reset the
Reset phonebook
Phonebook, Phonebook settings, Reset phonebook. Press
phonebook content.
,
L
This option only applies to the phonebook in your phone, not to the SIM
phonebook (see “Phonebooks” page 40).
Lock / unlock the keypad
You can lock the keypad to protect the keys from being pressed accidentally
(e.g., when the phone is in your pocket).
Keypad lock
Main features
18
To lock the keypad, press and hold
appears on the screen. To unlock the keypad, press and hold
Notes:
e
when in idle screen. The icon
L
e
again.
L
•
You can also choose immediate or delayed lock by selecting Settings
Security Keypad lock, then one of the available values. In this case,
your keypad will be permanently locked. If you unlock it by pressing the
key, it will be temporarily unlocked while you use your phone, and
>
>
e
then locked again after the time period you selected.
•
The emergency number is available even when the keypad is locked and
you can still receive calls (see “Emergency number” page 46).
•
•
•
Immediate keypad lock can be assigned to a Hotkey (see page 33).
You must unlock your keypad before switching the phone off.
It is possible to accept or reject a call even when the keypad is locked. The
keypad is unlocked automatically when the phone receives a call, and then
re-locks again once the call is finished.
Deactivate the ringer
If youdon’t want your phone to ring when you receive a call, you can deactivate
the ringer. In this case, the incoming call symbol flashes when you receive a call,
the display shows Incoming call, but the phone doesn’t ring. To deactivate the
ringer, proceed as follows:
Silence
1
Press
Move
,
<
and select Settings
>
Sounds
>
Ringer volume.
2
until the volume is set to Silence.
L
Silent mode can also be set by selecting Quick Settings > Silence. In this case,
the vibra alert is also activated. For faster access, you can assign a hotkey to this
function.
Activate the vibra alert
If you have set the function, your phone vibrates when receiving an incoming
call (activating the silent mode via the Silence Quicksetting as described above
will also activate the vibra alert). Otherwise, proceed as follows:
Vibra alert
1
2
In idle screen, press
,
and select Settings > Sounds > Vibra.
to confirm.
Move or to select On or Off and press
<
>
,
Main features
19
L
Activating the vibra doesn’t mute the ringer. If you want to mute it and keep the
vibra function on, activate the Silence mode as described above.
Read your mobile phone number
To read your own mobile phone number, press
-
when inidle mode and select
again. Your phone
Own num., then press
,, select Show and press
,
number is displayed if present on your SIM card. If not, select New, then follow
the instructions.
L
If your own number has been stored in the Phonebook, you can read it during a
call. See “Consulting the Names list” page 20.
During a call, you can…
Adjust the earpiece volume
During a call, move
<
to increase the volume, or
>
to decrease it.
Mute the microphone
You can mute the microphone so that your correspondent cannot hear you.
During a call, press , select Mute and confirm by pressing
Unmute the microphone
To unmute the microphone during a call, press
by pressing . The microphone is unmuted.
Write in the notepad
,
,.
Mute
,, select Unmute and confirm
,
Unmute
The notepad is a temporary memory in which you can note down a number
during a call. To do so during a call, simply enter the number that you want to
note. Wait a few seconds for your entry to be stored automatically in the
Notepad
notepad memory. When the call ends, press
Phonebook, etc.
,
to dial it, store it in the
Consult the phonebook
To consult the phonebook during a call:
View Names List
1
Press
by pressing
Press
,
, select View Names List, press
or
twice to return to the in-call screen.
,
and scroll through the entries
-
+.
2
e
Record a conversation
Only one recording is available, and each new recording (either memo or
conversation) will replace the previous one and is available in the menu
Extras > Memo > Play memo. To record a conversation during a call:
Record conv.
Main features
20
1
access the call context carousel.
,
to
2
Select Record conv. and press
press or hang up.
If you select Mute, then Record conv., only the caller’s voice is recorded.
,. To end the conversation recording,
,,
e
L
In most countries, conversation recording is subject to law regulation. We advise
you to notify the caller if you intend to record the conversation you have with him
and only record if he agrees. You should also keep any recording private. 30
seconds is the maximum recording time available (see “Memo” page 59).
Other features during a call
• Change the equalizer settings (see page 29),
• Add a name to the phonebook (see page 41),
• Switch to a handsfree (see page 47),
• Write and send a message (SMS) via the phonebook or the Notepad (see
page 48),
• Read a message (see page 49),
• Consult your Call list (see page 52),
• Consult your Organiser (see page 53),
• Check a voice mailbox or access a voice server via the Notepad (see
page 76),
• Transmit DTMF tones to answering machines and other devices (see
page 76),
• Make a second call (see page 76).
Main features
21
3 • Menu tree
press
or
,
to enter a menu or sub-menu, press
<
or
>
to move left or right in a menu and
+
-
,
Oper. Services p75*
Messages p46
Send a SMS p48
Together with
attachment / Send now /
Save
Call list p52
Call list p52
WAP p70
Launch / Favourites / Last
page / Favourites / Error
messages during WAP
connections are mainly due
to incorrect parameters: you
an
Reset p52
Organiser p53
Events p53
Read SMS p49
Day view p53
Week view p53
Month view p53
Delete past p53
Extras p56
Saved Messages / Received
Messages
should
operator before first use, in
order to have the
contact
your
SMS settings p50
appropriate WAP and GPRS
parameters. With some
operators, WAP access
parameters can be set
remotely. Please check
directly by your operator.
SMS centre / Signature /
Validity period / Reply path /
Delivery report / Auto save
SMS
Brick game p56
Call counters p56
Reset p52
Broadcast SMS p51
GSM counters
counters
/
GPRS
Services + p75
Service numbers p75
Images album p24
Phonebook p41
Reception / Topics / District
codes
Euro p58
E-Mail p60
Memory status p58
Calculator p58
Alarm clock p59
Memo p59
Settings p61
Network access
/
E-mail
server access / Advanced
Open mailbox p66
Send mail p65
22
Settings p27
Time and date p31
Call settings p36
Clock display / Set date / Set
time / Time zone / Daylight
savings
Call waiting / Caller ID / Call
forward /Autoredial / Any
key answer / Mailboxes
Sounds p27
Ringer / Ringer volume / Key
tones
/
Minute beep
/
Organiser alerts / Battery
low alert / New SMS tone /
Vibra alert / Equalizer
Language p32
Quick settings p38
Personal p39
Silence p39
Hotkeys p33
Voice command p35
Accessories p32
Display p25
Autonomy p39
Headset p39
Car p39
Screen saver
Animation
/
/
Backlight
/
Car melodies / Speakers /
Car kit command / Auto
switch off / Auto answer
Screen
animation
Security p29
Outdoors p39
Meeting p39
Network p35
Keypad lock / Public names /
Call barring / Change codes
/ PIN protection
GPRS attach
/
Register
again / Preferred list
* Subscription dependent.
Menu tree
23
4 • Display & images
Introduction
The Images album and Display menus allow you to Images album
select images in a list and display them, as well as set the
backlight duration, screen animations, screen saver, etc.
View all / JPEG / Bitmap /
Animations
In idle mode, press
,
and select Image album for the Settings
first option described in this chapter, or Settings, then
Display for the second set of options.
Display
Screen saver / Backlight /
Animation Screen
animation
/
Images album
This menu allows you to manage and display the pictures stored in your mobile
phone, to View or Delete them and Change their name.
When entering one of the available sub-menus, the pictures stored in your
phone are displayed as a text list. To access the graphical display, select a picture
in the list and press
picture, or to go back to the text list.
When renaming the file, select it in the list and press
and press , enter a name and press
>
. Then press
8
or
2
to go to the next or previous
<
,
twice. Select Rename
,
,.
The table below gives you an overview of the devices files can be sent to and
received from, as well as connection means.
Devices File type
Sent
via...
See...
Example
Mobile
to mobile and BMP icon
EMS animation
SMS
“Send an SMS”
page 48.
Sent byor received from
another mobile phone.
JPEG
EMail
“Get and store
attachments”
page 67
24
Devices File type
Sent
via...
See...
Example
PC to
mobile
JPEG pictures,
USB
e.g., resized with cable
Mobile Phone
Requires a data
connect kit (see
page 89).
Photographs taken with
a digital camera, files
downloaded from the
Internet or pictures
present on the data
connect kit CD-Rom.
To ol s.
JPEG
EMail
“Get and store
attachments”
page 67
Network BMP icons, JPEG Wap
to mobile pictures and
iMelodies
“Download fun
URL” page 79.
By connecting to a
"Download fun" Wap
site.
L
Wap
dependent
site
L
JPEG images must have the correct size and format for your mobile phone to
store and display them correctly. Please check “Get and store attachments”
page 67 for complete information on this subject.
Display
This item of the Settings menu gives you access to all options concerning the
display, including the management of the screen saver.
Screen saver
Allows you to activate/deactivate the screen saver. When activated, it will run
a slide showinidle mode, by using the jpeg file(s) youhave storedinyour phone
and selected (see “Get and store attachments” page 67).
Screen saver
1
Select Settings, Display, Screen saver and press
select On and press . In the list that appears, select an image by
pressing or (you deselect it also by pressing these keys), then press
to move to the next image. Once you selected the images of your
choice, press to activate the screen saver.
,
, then press
<
or
>
to
,
<
>
-
,
Display &
images
25
L
2
You must select several images (up to 10) in order to display a slide show. When
selecting only one image to be used as screen saver, only this image will be
displayed.
Select Start delay and press
<
or
>
to choose a value between 1 and
5 mn. When in idle mode, the screen saver will start according to the
time limit you have set.
3
Then select the screen saver Display period (from 10 seconds to 5 mn)
and press
of the slideshow.
,. The timing you have set will be applied between each image
L
Background images are automatically deactivated when entering an edit screen.
Also note that activating this function will automatically deactivate the screen
saver.
Screen animation
Allows you to activate a screen animation that will be displayed in idle mode.
Press or to select one of the available icons or Random to display all icons
randomly, then press to confirm.
<
>
Screen animation
,
L
Activating this function will automatically deactivate the screen saver.
Animation
Allows you to activate/deactivate the animation in different menus.
Deactivating this function increases the autonomy of your phone.
L
Animation
Backlight
The backlight is activated when receiving incoming calls or messages, browsing
lists and menus, etc. Press or to set the backlight Duration from Off to
1 mn backlight and press to confirm. Then press or to set the Screen
color from level 1 to level 7 and press to confirm.
<
,
>
Backlight
<
>
,
L
Deactivating this function increases the autonomy of your phone.
Display &
images
26
5 • Settings & Quick Settings
Introduction
The Settings menu allows you to customise your Settings
phone and change the settings related to each
available option (sounds, time and date, accessories,
etc.).
The Quick Settings menu allows you to change
several settings at once (see page 38).
Sounds / Display / Security /
Time and Date / Language /
Hotkeys / Voice command /
Accessories / Network / Call
settings
In idle mode, press
Settings, then press
, and select Settings or Quick
,to access a feature or option Quick Settings
and to change it as described further in this chapter.
Press to confirm or to cancel.
Silence / Autonomy / Headset /
Car / Outdoors / Meeting /
Personal
,
e
Settings
Sounds
This menu allows you to change the ringer volume, select a ringer melody, to
set alert beeps and activate or deactivate the vibra alert.
Ringer volume
By default the ringer volume is set to Medium. Press
<
or
>
to set the volume
of your ringer from Silent to Increasing and use a Hotkey to activate the silent
mode (see page 33). The Silent mode also applies to key tones.
Ringer volume
Ringer
This option enables you to select the ringer tone from the available melodies.
Scroll through the list by moving
selected melody being played (except for an Own melody: press
Playbackand press again to hear it). Press to select this melody as ringer,
to cancel, or move to the next melody.
+
or
-
and wait for two seconds to hear the
Ringer
,, select
,
,
e
L
You will not hear the melody if the volume ringer is set to Off or if the Silence
mode was activated (see page 19).
27
•
Downloaded and own melody
The Own melod. menu allows you to store melodies received via SMS,
either downloaded from a web site (see below) or received from a friend.
L
To personalise your phone, you can download new ringers by choosing them
from your operator's Website. From your personal computer, check on your
operator's Internet site the availability, terms and conditions of this service and
follow the instructions to download the selected ringer tone via a SMS.
1
From the Ringer menu, select Own melod., then press
list of own melodies. Select one of the own melodies and press
Select Send and press to send it.
,
to access the
,
.
2
,
L
This service is subscription dependent; you can only send melodies that are out
of copyright. When sending a melody via SMS (see page 49), the receiver must
have a Philips mobile phone to be able to hear it.
3
When receiving a melody together with a SMS, select Store to store it as
Own melod., and Rename or Delete it if you wish. Press
,
to confirm.
Key tones
Allows you to activate/deactivate the key tones. Even if Key Tones are set Off,
DTMF are played during calls (see page 76).
Key tones
Minute beep
Allows you to activate a beep, which is emitted 15s before the end of each
minute of communication (the beep cannot be heard by the caller). This allows
you to manage the duration of your calls.
Minute beep
Organiser alerts
Allows you to activate/deactivate an alert beep when an event you
programmed in your organiser is due.
Organiser alerts
L
Unlike the alarm clock, this alert will not ring if you turn your phone off.
Battery low alert
Allows you to activate/deactivate an alert beep which informs you that the
battery is low and requires recharging.
Batt. low alert
New SMS tone
Allows you to activate/deactivate an alert beep each time you receive a SMS.
New SMS tone
Settings &
28
Quick Settings
Equalizer
This option allows you to choose from 5 different equalizer settings. You access
it while in conversation with a caller: press , select Equalizer, scroll through
,
Equalizer
the list and wait a few seconds to hear the difference. Press
choice.
,
to confirm your
Vibra alert
Allows you to activate/deactivate the vibrating alert when receiving a call.
Vibra alert
Display
This menu allows you to set all features and options related to display. See page
page 24 for complete information.
Security
This menu ensures the security of your phone by locking the keypad, limiting
calls to public numbers, prohibiting specific incoming and outgoing calls,
activating security via PIN codes and changing those PIN codes.
Keypad lock
Allows you to activate/deactivate the keypad lock. When your keypad is locked,
you can unlock it by pressing and holding the
keypad automatically unlocks when receiving a call.
e
key when in idle mode. The
Keypad lock
L
Even when your keypad is locked, you can still place an emergency call (see
page 46).
Public names
Allows youto manage a specificnames list, calledPublic Names list, and restrict
calls to this list via the Call restriction option.
Public names
L
This feature is subscription dependent and requires a PIN2 code (see page 31).
•
Call restriction
Call restriction
Allows you to activate/deactivate the call restriction to the Public Names
list. When activated, you can only access the names present in the Public
names list, as opposed to the Phonebook of the main menu.
L
This function is subscription dependent and requires a PIN2 code (see page 31).
Please note that when activating this option, it might also apply to WAP and
e-mail connections over GPRS.
Settings &
29
Quick Settings
•
Public names
Public names
Allows you to consult and modify your Public Names list. You can enter
a new name, modify or delete a name in the list via PIN2 code.
Use the <New> option to enter the name and phone number of a new
name (see “Text or number entry” page 4). Then select the number type:
Phone, Fax or Data. Names in this list can be changed or deleted.
Call barring
This menu allows you to limit the use of your phone to specific calls by letting
you bar both outgoing and incoming calls. This function is network dependent
and requires a call barring password supplied by your service provider.
Call barring
•
Outgoing calls
Outgoing calls
All calls
-
International
-
Inter. except/home
-
Cancel
The Outgoing menu allows you to select between All calls, International
calls and Inter. except/home calls (the latter allowing you to call your
home country when you are abroad). You can also Deactivate the bar on
outgoing calls.
These menus then allow you to bar, within each available option, All calls,
Voice calls, Data calls or Fax calls.
•
•
Incoming calls
Incoming calls
All calls
-
When Roaming
-
Cancel
The Incoming menu allows you to select All calls or When roaming. It also
provides access to the Cancel menu to remove bar on incoming calls.
These menus then allow you to bar, within each available option, All calls,
Voice calls, Data calls or Fax calls.
Status
Status
In each sub-menu (All calls, When roaming, etc.), the Status option allows
you to know whether a type of call is barred or not.
Change codes
Allows you to change your PIN 1, PIN 2 and call barring codes.
Change codes
Settings &
30
Quick Settings
PIN protection
Allows you to activate/deactivate the PIN protection when switching on your
phone. When the PIN code is activated, you will be asked to enter your PIN
code when switching your phone on.
PIN protection
L
If your PIN code is deactivated, you cannot change it.
PIN2 code
Depending on your SIM card, some features or options may require a PIN2
secret code. This is a second secret 4 to 8-digit code given to you by your
operator. If you enter a wrong PIN2 code 3 times, your SIM card is blocked. To
unblock it, request the PUK2 code from your operator or retailer.
L
If you enter an incorrect PUK code 10 times in a row, the SIM card will be
blocked and unusable. If this happens, contact your operator or retailer.
Time and date
This menu allows you to set the time and date, time zone, daylight savings, and
change the clock display mode.
Clock display
Allows you to select Analogue or Digital time formats when shown in idle
mode, by pressing or . In both cases, press to confirm.
<
>
,
Clock display
Set date
Allows you to set the date by pressing the appropriate numeric keys (you can
also set the date by moving or ).
+
-
Set date
Time zone
L
The time zone and daylight savings are to be set first. You should then double-
check date and time if previously set. To know which time zone you are in, we
recommend you to check in an atlas or an encyclopedia.
Time zone
The Time zone option allows you to set the time zone you belong to, according
to GMT (Greenwich Meridian Time). Move or to select the setting
+
-
corresponding to your area, e.g. GMT + 00:00 when located in United Kindom,
GMT + 01:00 when in The Netherland, France or Germany.
Daylight savings
L
This setting only concerns countries in which time is set according to summer/
winter time (e.g. Greenwich Meridian Time / British Summer Time).
Daylight savings
Settings &
31
Quick Settings
This option allows you to set the daylight savings to On (in summer time) or
Off (in winter time) by moving or . As this setting impacts the date and
<
>
time option, it should be set first. If daylight saving is On and you set the time
to 12:00, it will automatically switch to 13:00 when turning the option to Off.
Set time
to increase or decrease the time minute by minute.
<
or
>
Set time
Language
This menu allows you to select a language for all menu text. A long press on
when in the idle screen automatically displays this menu.
0
Accessories
This menu becomes available the first time an accessory (see page 88) is
plugged in. It allows you to set all parameters linked to their use.
Accessories
Car melodies
Allows you to select the incoming call melody to be played by the car kit.
Several melodies are available: the ones that are specific to the car kit, and the
one you have previously chosen for your phone.
Car melodies
Speakers
Allows you to listen to your phone conversations, either through the car kit
speaker or the radio speaker if available.
Speakers
Car kit command
Allows you to activate the voice dial via a voice tag. The phone plugged on the
car kit, use this menu to program the voice command by following the on-
screen instructions. Once the voice command is defined, the car kit will emit a
beep and activate the voice dial as soon as you pronounce the voice tag (“Voice
dial” page 17).
Car kit command
Auto switch off
Allows you to automatically swith off the phone, either immediately, 30 second,
5 minutes or 3 hours after turning the car ignition off.
Auto switch off
Auto answer
Allows you to select the automatic answering of incoming calls. You can set a
delay for automatic answering from 5 to 15 seconds.
Auto answer
Settings &
32
Quick Settings
Hotkeys
Instead of entering the various menus and browsing the lists, you can set a
direct access to a specific function by linking it to a Hotkey, so that a long press
on this key will automatically activate this function.
L
You can only program keys
2
to
9
, as keys
0
(select language) and
1
(retrieve voice mailbox) are predefined and cannot be changed.
1
2
3
To set a hotkey, press
,
, select Settings > Hotkeys and press
to and press
Browse the list to select the function you wish to associate with this key.
Press to confirm your choice.
If the selected key is already set, you can reprogram it: press
Change and press . This will bring you to the list of available functions.
,.
Select a key from
2
9
,.
,
L
4
,
twice, select
,
To use the hotkeys, simply press and hold the key corresponding to the
function you want to launch or activate while in idle mode.
L
You can also set hotkeys for voice dial (see “Voice dial” page 17). Depending on
your service provider some Hotkeys, in addition to
predefined and locked, preventing reprogramming.
0
and
1, can be
You can associate hotkeys
2
to
9
to the functions of the following table.
Dials the associated
Locks / unlocks the keypad.
Flash Dial
number of the Phonebook.
Keypad lock
Activates the silence quick
setting (vibra on, ringer
volume off).
Activates the car quick
setting (ringer volumehigh,
any key answer).
Activ. Silence
Activate Car
Activates the headset
quick setting (ringer
volume medium, any key
answer on).
Activates the meeting
quick setting (vibra on,
ringer and all keys set to
silent).
Meeting
Activ. Headset
Activ.Outdoors
Activates the outdoors
quick setting (ringer
volume high, keypad lock
on with a 1mn delay).
Activates the personal
settings.
Activ. Personal
Reply last num.
Redials the last number
called.
Redials the number of the
last call received.
Redial last num.
Settings &
33
Quick Settings
Direct access to the
calculator.
Dials the emergency call
number.
Calculator
To voice mail
Activ. Autonomy
SOS call
Read SMS
Synchronise
Forwards all calls to the
voice mailbox.
Displays the messages list.
Activates the autonomy
quick setting, which
extends the battery
autonomy (animation off,
vibra on, backlight off,
ringer volume medium).
Runs a synchronisation of
your phonebook and/or
organiser with a PC
application.
L
Requires
connect kit (page 89).
a
Data
Opens the Messages menu.
Displays the event list of
the Organiser menu.
Send SMS
Show events
Play memo
Allows to record a memo.
Plays the memo back.
Record memo
Opens the E-mail menu for
access to the mailboxes.
Opens the Add event
menu of the Organiser.
Add new event
E-mail
Launches a WAP session.
Displays the accumulated
cost of outgoing calls.
Launch
Accum. cost
L
Subscription dependent
L
Subscription dependent
Direct access to the Brick
Game.
Displays the remaining
credit balance.
Show balance
Brick Game
L
Subscription dependent
Opens the Alarm menu.
Open the Backlight
colours menu.
Alarm Clock
Screen saver
-> Euro
Screen color
Images album
Euro ->
Opens the Screen saver
On/Off menu.
Open the Images Album
menu.
Direct access to the Euro
converter (from currency).
Direct access to the Euro
converter (to currency).
Opens the Phonebook
select. menu.
Opens the Brick Game.
Brick game
L
Subscription dependent
Phonebook select.
Settings &
34
Quick Settings
Voice command
Voice command menu allows you to quickly activate a specific function: instead
of programming a hotkey, you simply set a voice tag that will activate a feature
to the functions supported by the Hotkeys (see page 33).
1
2
3
To set a voice tag for voice command, press
command and press
Select <New> and press
be set with a voice tag. Press
,, select Settings > Voice
,.
,
, then browse the list to select the function to
,
to confirm your choice.
When Press OK and speak appears, follow the instructions displayed on
the screen. When prompted to record your voice tag, make sure you are
in a quiet environment, choose a short and simple word and clearly
pronounce it.
4
5
6
The next carousel menu allows you to Delete or Play the voice tag,
Change the function associated with this voice tag or Change the voice
tag used for this function.
Repeat the steps described above to add more voice commands. Then
make a short press on
press to go back to idle.
To activate a feature using the voice command, press and hold
in idle mode, then say the recorded voice tag.
e
to go back to the previous menu or a long
,
when
Words recorded as voice tags can be played, changed or deleted at any time.
You can also set a voice tag for a voice dial instead of a voice command (see
“Voice dial ” page 17).
L
The duration of a voice tag is 2 seconds. Up to 40 voice tags can be defined and
shared between voice dial and voice command.
Network
This menu allows you to handle the connection between the phone and the
network, register manually the available networks and manage your preferred
networks.
GPRS attach
Your mobile integrates features that support GPRS (Global Packet Radio
Service), a new mobile service allowing you to exchange data with high speed
GPRS attach
Settings &
35
Quick Settings
rates and to stay always online (i.e. have a permanent connection to the
Internet and WAP). Your phone allows you to fully benefit from GPRS access in
WAP and Internet.
L
Contact your phone operator to have full information about GPRS availability
over his network and for an appropriate subscription. You might also need to
configure your phone with the GPRS settings supplied by your operator, by using
the menus described in this section.
This menu allows you to define the attach mode of your mobile phone to the
GPRS service:
•
Always on
Your phone will always register to the GPRS service. This option allows
faster GPRS connection. However it will increase energy consumption.
•
For data calls
Your phone will automatically register to the GPRS service only when
required. This option allows to reduce energy consumption, however it
will increase the connection delay.
L
In spite of these settings, you must still select the bearer (GSM or GPRS) in the
menus of each application to be used (WAP or data transfer).
Register again
Provides you with a list of the networks available in the area when the manual
mode is selected. Select the network you want to register with and press
to confirm.
,
Register again
Preferred list
Allows you to build a network list in order of preference. Once defined, the
phone will try to register on a network, according to your preferences.
Preferred list
Call settings
This menu allows you to set all the call options (call forward, waiting, etc.).
Call forward
Allows you to divert incoming calls either to your mailbox or to a number
(whether in your Phonebook or not) and applies to:
Call forward
-
-
Data calls
Voice calls
Fax calls
Settings &
36
Quick Settings
L
Before activating this option, you must enter your voice mailboxes’ numbers (see
“Mailboxes” page 37). This feature is subscription dependent, and different
from the call transfer, which takes place when one/several calls are in progress.
•
Unconditional
The unconditional option will divert all the incoming calls.
L
Warning! When selecting this option, you will not receive any calls at all
until you deactivate it.
•
Conditional
This option allows you to choose in which circumstance(s) you want to
divert incoming calls. Three options are available: If no reply (you haven’t
replied to the call), If not reachable (your network isn’t available) or If
busy (you are already on the phone and your subscription doesn’t include
the call waiting option or you haven’t activated it). Each option can be set
independently.
Once you selected either Conditional or Unconditional, choose whether
you want to divert calls to your voice mailbox or to another phone
number, or cancel the call forward.
•
Status
Status
Allows you to display the status of all call forwarding.
Mailboxes
This menu allows you to enter your voice mailbox numbers if not available on
your SIM card.
Mailboxes
L
In some cases, you might have to enter two numbers: one to listen to your
mailbox, the other one to forward calls. Contact your operator for complete
information on this subject.
Autoredial
Allows you to activate/deactivate the autoredial feature. If autoredial is
switched on and if the line is busy, your phone automatically continues to redial
this number until a successful connection is made, or until the maximum
number of attempts is reached (10). The phone shall emit one beep at the
beginning of each attempt and one special beep if the connection is successful.
Autoredial
L
The time between redials increases with each attempt.
Settings &
37
Quick Settings
Any key answer
Allows you to accept a call by pressing any key, except
), used to reject a call.
Any key answer
Call waiting
Call waiting is managed differently depending on the type of network you
selected.
Call waiting
•
With GSM call
Allows you to activate or deactivate the call waiting and applies to:
With GSM call
-
-
-
-
Status
All calls
Voice calls
Fax calls
Data calls
When this option is active, you hear a beep if someone tries to call you
while already in communication.
L
This function is subscription-dependent. Contact your operator.
•
With GPRS call
With GPRS call
Allows you to Activate or Deactivate the call waiting for voice incoming
calls.
Caller ID
Allows you to show or hide your identity to your correspondent. The Status
option will inform you if this function is activated or not.
Caller ID
L
This function is subscription and network dependent. Contact your operator.
Quick settings
This menu allows you to access a group of predefined settings, which let you
quickly adapt your phone to your environment by changing several settings at
once. For example, selecting Meeting will set your ringer volume to silent,
activate vibra and deactivate the key tones (the other items are set according
to the settings you configured). When your meeting is over, selecting Personal
will reactivate all your usual settings.
L
You can also associate a quick setting with a hotkey (see page 33).
Quick settings
Warning! * The settings listed in the first column are the default settings
(preset in the factory). As you can change each of them, they might be different
from the ones listed below. In both cases (whether you changed parameters or
Settings &
38
Quick Settings
not), these settings are stored in the Personal menu item and apply to each
box of the table.
¤
*
Personal
Silence
Autonomy
Outdoors
Meeting
Active
Inactive
¤
Active
Vibra alert
Ringer volume
Key tones
Active*
Medium*
Active*
Active*
Active*
Active*
10 sec*
Inactive*
Active*
Silent
Inactive
Inactive
Inactive
Inactive
¤
Medium
Loud
¤
Silent
¤
Inactive
¤
¤
¤
¤
¤
¤
¤
¤
Organiser alerts
Battery low alert
New SMS tone
Backlight
¤
¤
¤
¤
Inactive
¤
¤
¤
¤
Any key answers
Animation
¤
Inactive
¤
Accessories settings
When connecting an accessory, the settings described in the table below also
become available in the Quick Settings menu.
L
When disconnecting the accessory, the phone goes back to the Personal Quick
Setting (see table above).
Headset
Cigarette
Data
Car
Lighter Adapter
or Fast charger
Headset
Car
¤
Inactive
Inactive
Inactive
Vibra alert
Medium
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
Loud
Ring volume
Key tones
¤
¤
¤
¤
¤
Organiser alerts
Battery low alert
New SMS tone
Backlight
¤
¤
¤
¤
Active
Active
¤
Active
¤
Any key answers
Animation
Settings &
39
Quick Settings
6 • Phonebooks
All operations described in this chapter require you have selected the
relevant Phonebook, whether in SIM or in phone.
The present chapter describes how to manage phonebooks. Please refer to
“Calls and messages” page 46 for further information on how to call
numbers and send messages.
Introduction
Your mobile phone has two phonebooks. The SIM Phonebook
phonebook is located on the SIM card and the number of
entries depends on the card capacity.
View names list°
Phonebook settings
Phonebook select.
In phone
L
The SIM card capacity depends on the type of card you
have. Please check with your local dealer for full
information on this subject.
In SIM
Groups setting
Select melody
Select picture
Rename
Reset phonebook*
Copy all to phone¤
The second phonebook is built in the mobile’s memory
and can hold up to 300 names with several types of
information, as described below.
/
/
L
The phonebook located on your phone shares the mobile
capacity and memory with the organiser and the image
album. As such, both features are inter-dependent: the
more names you create, the less events you can store
and vice-versa. 300 is the maximum number of names
and events cards.
L
°) Displays the names list of
selected phonebook (in SIM
or in phone).
*) This option does NOT
apply to SIM phonebook.
¤) Will copy the content of
your SIM card into your
phone. Selecting this option
twice will duplicate all the
names.
To check the memory available in your phone, press
when in idle mode to access the main menu, then select
Extras > Memory.
,
40
Phonebook
The Phonebook menu allows you to select one of the two available
phonebooks: the one on your SIM card or the one in your phone. When
entering new names in the Phonebook, they will be added to the phonebook
selected in this menu.
Phonebook in SIM card
Press and select Phonebook, Phonebook settings, Phonebook select. Then
press or to select the phonebook located in your SIM card. Names added
,
<
>
Phonebook select.
to this phonebook can then be copied into the phonebook located in your
phone.
In SIM card
When you copy the contents of your SIM phonebook into your phone (see
below), you can still use the phonebook of your SIM card, even though it
features less fields of information. For a complete description of the SIM
phonebook and how to add names to it, see “Add names in the phonebook”
page 41.
L
Your mobile phone only manages one phonebook at a time and will ignore the
information relative to the other one: e.g., if "Smith" is present in both
phonebooks and if you delete it in the phone, it remains unchanged in the SIM.
Phonebook in phone
The default selected phonebook is the one located in your phone. It can hold
up to 300 names and be reset at once using the Reset phonebook option.
Depending on SIM card capacity, names added to this phonebook can then be
copied into the SIM phonebook (see “Copy to SIM” page 45).
If you are using a SIM card for the first time, follow the standard SIM card
installation procedure as described page 8, then go to the section titled “Add
names in the phonebook” below.
Phonebook select.
In phone
Add names in the phonebook
In the SIM card
To add a name in the SIM phonebook, proceed as follows:
1
2
Press
-
to enter the phonebook, select New, then press
,
,
.
Enter the name, then the number of your choice and press
.
Phonebooks
41
L
A number can contain a maximum of 40 digits, depending on your SIM card.
Entering all numbers, including local ones with international prefix, country code
and area code will allow you to dial them from any location.
3
Select the type of number allocated to the name: Phone, Fax or Data and
press
,
to confirm and store this name in your phonebook.
In the phone
The phonebook located in your phone holds more information fields than the
SIM phonebook, and handles:
•
•
•
•
First and last names fields
Numbers fields (Mobile, Work, etc.)
Extra fields (e-mail and note)
Group selection
up to 20 characters
up to 40 digits and 1 "+"
up to 50 characters
You can create up to 300 records holding up to 5 numeric fields of your choice
(e.g. 2 mobile numbers or 3 work numbers for the same name) out of a
maximum of 7 fields.
1
Press
Enter the last, then the first name of your choice and press
One of the two name fields can be empty, but not both. To go back to the
previous field, press
,
and select Phonebook, New, then press
,.
2
,.
L
e
.
3
4
In the New field carousel, select the number type of your choice (Mobile,
Fax, Data, Pager, Home, Work) or one of the two alphanumeric fields
(Note, e-mail) and enter the relevant number or text. Then press
save this new record.
,
to
If you wish, then select the Group this name will belong to and press
to confirm. By selecting Phonebook, Phonebook settings, then Groups
setting, you can associate a specific Melody and Picture to each available
,
group, as well as Rename groups. In all cases, press
changes (see “See & hear who’s calling: Fotocall” page 16 for complete
information).
,
to save settings or
When receiving a call from a contact associated to a group, the melody
and/or picture defined for this group will automatically ring and/or appear
on the screen.
Phonebooks
42
Own number
The "Own number" item that appears in the phonebook should contain your
own phone number(s). If not, we advise you to enter your mobile number(s) as
well as any other relevant information.
L
Although all its fields can be empty, the "Own number" item cannot be deleted.
Edit and manage names
Once you have stored names in your phonebook, press
-
when in idle mode
to access the Phonebook. Thanks to the built-in predictive editor, you can
search for a name in the phonebook the same way you enter it (see page 4):
when the names list is displayed on screen, quickly press -only once- each key
corresponding to the first letters needed tospell a name (e.g., 627for
"mar" starting "Martin"). Keystrokes input are analysed and the name starting
with these letters is selected in the list. Depending on the phonebook you have
selected, you will have access to part or all of the following options:
• call or call handsfree
• associate a voice dial
• flash dial
• delete
• change name
• send a message • show
• make default • include in a group
• copy to phone
• copy to SIM
• change type
In the SIM card
Select a name in the SIM card phonebook, then press
following options:
,
to access one of the
-
-
-
Delete to delete the selected name and number,
Change to change the selected name and all related information,
Copy to phone to copy the selected name and all related
information into the phonebook located in your phone.
In the phone
Add a field
1
To add a new field to an existing record, select the name of your choice,
select Show and press
,.
2
Select <New> and press
,
. Choose the type of field to be added and
press
,. Enter the number or text, then press
,
to save changes.
Phonebooks
43
3
Repeat steps 1 and 2 to add up to 6 fields to the same record. Make a
short press on to go back to the previous menu, or a long press to
go back to idle mode.
e
L
Numbers or text will appear in order of creation date. The first fax or phone
number you enter becomes the default number. As such, it appears in first
position in the list. To make another number default, see “Make default”
Change a field content
1
To change the content of a field in an existing record, select the name of
your choice, press , select Show and press again.
Then select the field to be changed in the list, press , select Show and
press again; the details of the selected field appear (number entered,
check mark icon if it is the default call number, icon corresponding to the
type of number, etc.). Press to access the next carousel.
In the carousel that appears, select Change and press
changes wanted and press to save them.
,
,
Show
2
,
,
,
3
,. Make the
,
Change
Change a field type
L
If you copied your SIM phonebook into your phone, some numbers might appear
as being of "No type" and don’t have any icon. "No type" numbers can only be
changed: follow the procedure described below to define a type for these
numbers or to change the type of any other saved number.
Change type
To change a field type of an existing record, repeat steps 1 to 3 of the “Change
a field content” paragraph. Then select Change type in the carousel menu,
select the new type of number and press
Delete a field
To delete a field of an existing record, repeat steps 1 to 3 of the “Change a field
,
to confirm your choice.
content”paragraph. Then select Delete in the carousel menu, and press
confirm.
,
to
Delete
Make default
The first number you enter when creating a new record becomes the default
number: it will appear first on the fields list and is automatically called when
Make default
pressing the pick-up key or when pressing
handsfree or Send SMS option.
,
and selecting the Call, Call
Phonebooks
44
To change the default number (e.g. make the "Work" number default instead of
the "Home" number), repeat steps 1 to 3 of the “Change a field content”
paragraph. Then select Make default in the carousel menu, and press
confirm.
,
to
Copy to SIM
As mentioned earlier, entering names in the SIM phonebook can be useful if you
change phones frequently. If you copy phone numbers into the SIM card, your
phonebook is always updated when switching phonebooks or when using
another phone.
Copy to SIM
To copy a number into the SIM card phonebook, repeat steps 1 to 3 of the
“Change a field content”paragraph. Then select Copy to SIM and press
,.
Phonebooks
45
7 • Calls and messages
Introduction
The Phonebook menu Phonebook
features information
related to each name
stored in the selected
phonebook.
[Phone phonebook selected]
<New>
Last name > First name > Pager / Home /
Work / Mobile / Fax / Data / Note / e-mail
> Group
L
If the entries are different from one
phonebook to the other, the
Phonebook menu contentsmayvary.
[Name selected]
Change name / Call / Call handsfree / Send
SMS / Delete / Show (Copy to SIM, Voice
Dial, Flash dial, Make default, Change type) /
Select group
[SIM phonebook selected]
< New >
Enter name > Enter number > Number type
> Data/Phone/fax
[Name selected]
As for the Messages
menu, it allows you to
manage the messages
in your voice mailbox,
short messages (SMS) to be sent or
read, the settings for all messages
including broadcast messages. You can
delete all messages at once via the
Reset command.
Call / Call handsfree / Send SMS / Voice dial
/ Flash dial / Delete / Change / Copy to
phone
Messages
Send SMS / Read SMS / SMS Settings / Reset /
Broadcast SMS
Call a number
Emergency number
The emergency number will call the nearest emergency centre of your area. In
most cases, you can call this number even when your keypad is locked and if you
haven’t entered your PIN code yet.
SOS Call
L
Depending on the network operator, the emergency number can be dialled
without the SIM card being inserted. 112 is the standard emergency number for
Europe (also for UK: 999).
46
1
2
To call this number, enter it in idle mode by pressing the corresponding
keys, or press and select Phonebook > Emergency number.
Press to dial and press to hang up.
,
(
)
Other number
Enter a number
In idle mode, enter a number by pressing the corresponding keys. Press
dial and press to hang up.
Pressing will let you access a carousel allowing you to call this number, store
(
to
)
,
L
it or send a SMS.
Select a name
L
For your own comfort and safety, ensure you move the phone away from your
ear when calling handsfree, especially when increasing the volume.
Call
1
2
Press
-
and select the record of your choice.
Call handsfree
If you selected the phonebook in your SIM card:
-
-
once the record is selected, simply press
press twice to access the next carousel, then select Call or Call
handsfree and press to dial the number.
If you selected the phonebook in your phone:
(
to call, or
,
,
3
•
To call the default number:
-
-
once the record selected, simply press
(
to dial, or
press
,
to access the record carousel, then select Call or Call
handsfree.
•
To call any other number, choose Show once the record is selected
and choose a number type in the list (Mobile, Home, etc.). Press
to access the next carousel and select Call or Call handsfree.
,
4
In all cases, press
You can also switch to handsfree while a standard call is in progress: press
select Activ.h/free and press to confirm.
)
to hang up.
L
,,
,
Use Flash dial
In idle mode, press and hold a key between
2
and
9
to dial the associated
entry (see “Flash dial” page 16): connection is established. Press
)
to hang
Flash dial
up.
Calls and
messages
47
Use Voice dial
In idle mode, press and hold
“Voice dial” page 16). If the phone recognizes the voice tag, it dials the number
associated with it. Press to hang up.
,, then pronounce the saved voice tag (see
Voice Dial
)
Messages
In addition to calling people, you can also send them text messages, called SMS,
together with a melody or an emotion icon (optional). These short messages
can be sent to any correspondent (saved in the phonebook or not) and are
displayed on their mobile phone screen when received.
The Send SMS item of the Messages menu allows you to:
• send a standard or customised short text message to someone,
• edit the last message sent to modify it if needed and send it again,
• add an iMelody, pre-defined sounds, an animation or a picture to your
message.
Send SMS
The Standard SMS messages are displayed one after another: Please call me
back at... for example allows you to select a pre-configured message including
your number, if this number is the first one of the Own num. option (see
page 46).
Send a SMS
To a name in the list
•
To the default number if several (phonebook in phone) or to the
unique phone number (phonebook in SIM)
Press , select the name of your choice and press
1
2
-
,.
Select Send SMS and press , then select the type of message to be sent
,
and press . Enter your message, attach a graphic or a sound if you wish,
,
then select Send now or Save (see below).
•
To the number of your choice (phone name list only)
1
Press
and press
Select the number of your choice and press
Proceed as described in step 2 of the previous paragraph.
-
and select the record of your choice, then press
,, select Show
,.
2
3
,.
To any other name
To send a short message to someone whose number isn’t stored in the
phonebook, press
,
and select Messages, then Send SMS and New. Enter the
Calls and
messages
48
phone number to which the message should be sent to and press
follow the instructions decribed above to send a message.
,. Then
Together with an attachment
This option allows you to attach a sound, icon or animation to your message.
Depending on the type of file you want to attach, select Add graphic to attach
a bitmap image or an animation, and/or Add sound to attach a melody. Select
the sub-menu of your choice, then one of the available items in the list that
appears, and press
,
to confirm and attach it to your message.
L
You can send up to 2 attachements of 2 different types together with your SMS.
Animations and pictures are exclusive: if you first select an animation, then a
picture, only the picture will be taken into account and vice-versa.
Some icons, animations and sounds are pre-defined and shipped as standard
with your mobile phone. Personal pictures and sounds, e.g., that you have
received via SMS or e-mail and then stored in the relevant menus, will
automatically appear in the "Own" sub-menus (Own melodies, Own
animations, etc.). You cannot send "Own" items via SMS when they are
copyright-protected.
Send now
Allows you to send the current message once you entered it (to learn how to
enter text and numbers, see page 4). Press
,
to confirm.
Send now
Save
Allows you to store the current message and its associated icon and melody if
any. Press to confirm.
,
Save
Read SMS
The Read SMS item of the Messages menu allows you to consult the list of SMS
you have saved and received, as well as delete, reply, re-send or forward these
messages.
Read SMS
Received Messages
The messages you received and already read are labelled with
received but not yet read are labelled with . Select a message and press
to read it. When displayed, press to access the following options:
- Reply to the sender and send him a message,
. Messages
s
,
,
- Forward the selected message (choose the recipient in the phonebook or
enter a phone number manually; you cannot modify a forwarded SMS),
- Delete the selected message,
Calls and
49
messages
- Store number of the sender if it is attached to the message,
- Store melody if a melody was sent together with the SMS (see “Downloaded
and own melody” page 27),
- Store graphic(s) if one or several graphics and/or animations were sent
together with the message,
- Extract a number included in the message itself, if this number is included in
double quotes (several numbers can be included and extracted),
- Call the sender of the message (operator-dependent).
Saved Messages
The messages you sent are labelled with
auto save SMS mode (see page 51). Select the message you want and press
to read it. When displayed, press
“Received Messages”, including storing the caller’s number.
in normal mode or with
t
,
in
,
to access the options described above in
Clear SMS
The whole SMS list can be cleared at once: press
Reset. Press again to reset the SMS list.
,and select Messages, then
,
Reset
L
Deleting your SMS list is useful to free memory space in order to store new
messages.
SMS settings
This menu allows you to customise your SMS via the options described below.
SMS settings
SMS centre
Allows you to select your default SMS centre. If not available on your SIM
card, you must enter your SMS centre number
.
SMS centre
Signature
Allows you to sign your SMS. This signature consists of a series of characters
showing your default "Own number". This forms a signature that is transmitted
at the end of your message. The length of the message is consequently reduced.
You can edit the signature, modify and save it.
Signature
Validity period
Allows you to select the length of time your message is to be stored in your
SMS centre. This is useful when the recipient is not connected to the network
(and thus cannot receive your message immediately).
Validity period
L
Subscription dependent.
Calls and
messages
50
Reply path
You can activate or deactivate this option, which allows you to transmit your
SMS message centre number with the message. Your correspondent can then
reply using your own SMS centre and not theirs. This speeds up the rate of
transmission.
Reply path
L
Subscription dependent.
Delivery report
You can activate or deactivate this option which informs you via a written
message whether your SMS was received or not.
Delivery report
L
Subscription dependent.
Auto save SMS
Allows you to activate or deactivate the automatic saving of messages sent.
Auto save SMS
Broadcast SMS
This menu allows you to activate or deactivate the reception of SMS broadcast
by the network to all subscribers. When activated, this service causes the
mobile to listen to messages which are regularly transmitted to all subscribers
on the network.
Broadcast SMS
Reception
Allows you to activate/deactivate the reception of cell broadcast messages.
When selecting On, you must define one or several topics as described below.
Reception
Topics
Allows you to define the type of messages you want to receive. To define a new
type, select <New>, enter the code provided by the operator, and, if desired,
associate a name. If you select an existing type in the list, you can change or
delete it. You can enter up to 15 different types in the list. To obtain the codes
corresponding to the different types, contact your operator.
Topics
District codes
Allows you to select the type of messages you would like to be permanently
displayed on theidle screen. As a result, for this special handling of themessage,
District Code
you must enter the type in both the District code and the Topics menu.
Calls and
51
messages
Call list
This menu provides you with the list of outgoing and incoming calls, as well as
attempts at auto redialling and call details. The calls made, missed and received
are displayed in chronological order with the most recent on top of the list.
When the Call list is empty the screen displays List empty.
Display
Press
again to consult the date, time, number, call status of any selected call and to
know if it was sent or received. Press for access to a carousel which allows
,
then select Call list and press
,
twice to display the call list. Press
,
Call list
,
you to Call or Call handsfree this correspondent, Send a SMS, Delete the
selected call or Store the associated number.
L
You can directly access the Call list by moving
select a record in the Call list and press
+while in idle mode. You can also
to dial the corresponding number.
(
Reset
Press
,, select Call list, then Reset. Press
,
to reset the Call list.
Reset
Calls and
messages
52
8 • Organiser & Extras
Introduction
Your mobile phone features an Organiser
Organiser which allows you to
manage and co-ordinate various
events including meetings.
Events
<New>
Holiday / Meeting / ToDo
[Event selected]
Delete / Change
Events can be viewed in different ways (day, week or
month views), can be changed or deleted at any
moment, as well as repeated according to specific
frequencies. The “Organiser alerts” (see page 28)
allow you to be alerted by a beep when events are
due (e.g., 5 mn before a meeting).
Day view
Week view
Month view
Delete past
Also, data exchanges and synchronisation of your
organiser can be performed via a USB cable Extras
connected to your phone and to the external device.
As for the Extras menu, it features
Call counters / Euro Converter/
Brick game* / Memory status /
easy-to-use items such as
Calculator, an Alarm clock, Call
counters which will let you manage
a
Calculator
Memo
/
Alarm clock
/
L
* This menu can be subscription
dependent. As such its icon and
content may vary.
your call costs, Euro converter, memo and
conversation recording.
Organiser
Creating a new event
This menu allows to create events and store them in your organiser. Events can
be Meetings, Holidays or ToDos. When the organiser alert in On (see page 28),
a beep alerts you when an event is due.
1
2
3
4
Press
Select <New> and press
Select the type of event to create (Holiday, Meeting, ToDo) and press
Enter the starting and ending date & time of the event and press , enter
the text concerning the event (e.g. "Meeting with Smith") and press
,
, select Organiser > Events and press
,.
,.
,
.
,
,.
53
5
The Set Reminder menu reminds you of events via alerts triggered at
times you choose. Moving or , set the Reminder for this event and
press
<
>
,.
L
This menu only applies to Meeting and To Do events. Note that the reminder
depends on the time set and displayed on the screen. As such, it will be updated
when changing time zones (see “Time and date” page 31).
6
7
Move
<
or
>
to set the Repeat Eventoption for this event and press
,.
The events will be listed using start times and date. Back to the events list,
-
-
press and hold
repeat steps 2 to 7 to create as many events as needed.
e
to go back to idle mode, or
L
The organiser shares the mobile capacity and memory with other features
(phonebook, picture album, voice memo, etc.). As a consequence, all features
are inter-dependent: the more events you create, the less names, memos or
images you can store, and vice-versa. 299 is the maximum total of events +
names you can store.
If "List full" appears, delete an event (or name) to be able to create a new one.
To check the memory available in your phone, press
Memory status
,
and select Extras, then
.
Modifying an event
Changing an event
L
When creating an event, some fields are not available to help you create it more
quickly. Nevertheless, they become available when changing that event.
Change
1
To change an event, press
of your choice and press
,
and select Organiser, Events, then the event
,
.
2
When your phone displays the details of the selected event, press
select Change and press again.
Changing a repeated event will also modify all instances of this event: in this case,
press to confirm.
Change any information as needed and as described above.
,,
,
L
3
,
Deleting an event
•
1
Deleting a single event
Press to enter the main menu, select Organiser, Events, then the event
of your choice and press twice.
Delete
,
,
Organiser &
Extras
54
2
Select Delete and press
,
to confirm.
•
Deleting a repeated event
By selecting a past occurrence
1
Press
and press
When the event details appear, press
to confirm: only the past occurences of the selected event are deleted.
By selecting a future occurence
,
and select Organiser, Events, then a past occurence of an event
,.
2
,, then select Delete and press
,
1
Press
occurence of an event and press
When the event details appear, press
to confirm: all occurences of the selected event are deleted.
Deleting passed events
,
to enter the main menu, select Organiser, Events, then a future
,.
2
,, then select Delete and press
,
You can also delete past events by selecting Delete past at the first level of the
Organiser menu. To do so, proceed as follows:
Delete past
1
2
Press
Enter the starting date (past or future) from which all previous events will
be deleted and press
Press to confirm. In this case, all events preceeding this date will be
deleted.
,
, select Organiser > Delete past, and press
,.
,.
3
,
L
To delete all events set in your organiser, enter a starting date several years
ahead (e.g., 12/31/2010). This way, you make sure all events preceeding this
date are deleted at once.
Views of events
The Day view, Week view and Month view display in the selected format all
events stored in your organiser. To display events in these views, proceed as
follows:
Day view
Week view
Month view
1
2
Press
,
, select Organiser > the view of your choice and press
,.
Once you entered the selected view, move
previous or next day, week or month.
+
or
-
to display the
3
Press
one.
,
to display the list of corresponding events or to create a new
Organiser &
Extras
55
Time zone
Although changing time zones is necessary when travelling a lot, be aware that
it will impact all organiser reminders: the event alarms will be updated
depending on the time displayed on the screen (see “Time and date” page 31).
Time zone
Extras
This menu enables you to manage the Call counters, Euro converter, Memo,
Alarm clock, Calculator and a Brick game.
Brick game
L
This menu can be subscription dependent. As such its icon and content may vary.
This menu gives you access to a game which consist in breaking a complete set
of bricks with a ball and a racket. When you have destroyed the last brick, you
access the next level. Keys used are the following:
Brick Game
To move left or right
4
*
0
and
6
#
To throw the ball left or right
and
To pause the game; pause time is limited to 2 mn after
which the screen returns to idle mode and the game is lost.
Call counters
This menu allows you to handle the cost and duration of your calls.
Call counters
GSM counters
This menu gives you access to the following options described below.
L
The GSM Call Counters do not include WAP connections. Most options
mentionned below are subscription-dependent.
GSM counters
•
Accumulated call timer
Select this option and press
Outgoing or Incoming calls.
Accum. call timers
,
to Show or Reset the time duration of
Organiser &
Extras
56
•
Accumulated cost (subscription dependent)
Allows you to display the accumulated cost and to set the counter to
zero. It may be protected by PIN or PIN2 codes.
Accum. cost
Shows howmuch has been spent, having established the
Show
Reset
charge rate.
Allows you to reset the current Accumulated cost to 0;
requires your PIN2 code.
Allows you to check the remaining credit (compared
with previously set limit).
Show balance
Allows you to cancel the cost limit. It may be protected
by PIN or PIN2 codes (depending on your
subscription).
Cancel cost limit
Allows you to enter the cost limit used in the Show
balance menu.
Cost limit
Allows you to set or change the rate per unit. First
enter the currency used (three characters maximum)
then enter the cost per unit.
Charge rate
•
•
Info at call end (subscription dependent)
Allows you to activate or deactivate the systematic display of the length
and/or cost of each call when hanging up.
Info at call end
Last call info
Last call information (subscription dependent)
This menu allows you to display the duration and/or cost of your last call.
GPRS counters
This menu allows you to select either one of the following options:
L
This feature is subscription and network dependent.
GPRS counters
•
•
Last mobile session
This option will display the last connection session or transfer volume of
your mobile phone (e.g., after a WAP connection over GPRS).
Mobile session
Last PC session
This option will display the last connection session or transfer volume of
your PC transmission (e.g., when sending files from a PC with a data
connect kit).
PC session
Organiser &
57
Extras
L
The call and counters managed by your mobile phone might differ from the
ones used by your operator. You should therefore consider the call counters
displayed on the screen as informative items, but NOT as the actual charge
rate basis.
Euro
The -> Euro menu enables you to convert a sum into Euros by entering the
amount and pressing
The <- Euro menu enables you to convert a sum from Euros by entering the
amount and pressing
-> Euro
,.
Euro ->
,.
L
The currency used for the conversion is determined by the country where you
have subscribed. The Euro converter is available upon subscription and only in
countries using the Euro.
Memory status
This menu allows you to display the percentage of memory available in your
phone. Several features share the mobile capacity (images, own melodies, etc.).
Press to check the memory status showing the memory used out of the
total amount available, and press again to access the list.
,
,
L
If "List full" appears when saving a new item or to free memory space, you must
delete an item (e.g,, a name or an event) to be able to create or add a new one.
Calculator
This menu provides the following functions:
Addition
By pressing the
By pressing the
By pressing the
By pressing the
By pressing the
*
*
*
*
#
key.
Subtraction
Multiplication
Division
key twice.
key 3 times.
key 4 times.
key.
Equals
Enter the figures using the keypad. Calculator accuracy is to 2 decimal places
and is rounded up to the higher decimal figure. Press to correct the
to get the dot. Press and hold twice to
e
numbers. Press and hold
return to idle mode.
0
e
Organiser &
Extras
58
Alarm clock
This menu allows you to set the alarm clock. Select Extras, Alarm clock, then
press or to activate it. Enter the time, then press and select:
<
-
>
,
Once activates the alarm at a set hour on a set day,
-
-
Every day activates the alarm at a set hour every day of the week,
On weekdays activates the alarm at a set hour on weekdays only.
Then select one of the alarm alerts: the buzzer, a melody or a memo recording
if stored and press to confirm your choice.
,
L
The alarm clock will ring even if you turned off your phone, but NOT if the Ringer
volume is set to Off (see page 27). Press any key to stop the alarm ringing.
Memo
This menu allows you to record a memo of 30 seconds maximum.
Select Extras > Memo and press . Select Record to record a new memo.
Follow the instructions on the screen and press once your memo is
,
,
recorded. The corresponding icon appears on the screen in idle mode until you
play it or delete it. You can then select Delete, Playback or Play back with
Handsfree.
L
Memo and conversation recording both share this menu (see “Record a
conversation” page 20). You can only record one memo or conversation at a
time: if another one is recorded, it will replace the previous one.
Organiser &
59
Extras
9 • E-mail
If not included in your phone subscription, you must subscribe to an e-mail
account (over the phone or via Internet froma computer) and have received
the settings information from your provider. In this case, all parameters are
communicated to you by your provider and/or operator as described below
and must be entered as given.
If included in your subscription, you simply have to enter the login, password
and e-mail address of your e-mail account.
Introduction
Your mobile phone features an E-Mail
e-mail application allowing you to
send and receive e-mails, like you
Mailbox 1 / Mailbox 2
Settings
would do from a PC (an attachment
Network access
such as a jpeg image can also be included). E-mails
can then be forwarded to someone else and
attachments stored in your mobile phone.
This feature is subscription-dependent and specific
to Internet Service Providers (ISP): your mobile
phone readily supports them if they are included in
your subscription. Contact your ISP for detailed
information on availability and rates.
GSM settings**
GPRS settings*
Bearer
E-mail server**
Advanced**
Open Mailbox
Previous
[Header selected in the list]
Get mail / Details /
Reply / Forward to /
Add to names / Delete
L
Mailboxes 1 and 2 feature the same settings and
options. Configuring them differently will allow
you to have two different e-mail accesses/
addresses from your mobile phone.
Next
Send mail
Validate list / Add adressee
* Operator settings
** Internet service provider settings
To enter text and numbers, including
specific signs such as @ or %, refer to the
characters table described page 6.
L
60
As shown below, two types of settings must be configured before using
the e-mail feature: the settings you get from your operator, needed to connect
to the network (see “Network access”), and the ones you get from the e-mail
service provider to connect to his server (see “E-mail server access”).
Telephone network
Internet network
GSM or GPRS connection
E-mail access via GSM or GPRS
Network access
Info usually provided
by GSM operator
E-mail server
Info provided by
Service provider
Advanced
Info provided by
Service provider
See “Bearer” page 62,
“GPRS settings” page 62
and “GSM settings”
page 63.
See “E-mail server See “Advanced”
access” page 63 page 64
Your phone might have been pre-configured. In this case, most
parameters are already set and you don’t have to change them
(except for Login, Password and E-mail address which are up to you when
creating an e-mail account).
L
In some cases, your operator might also be your e-mail service provider.
Settings
Network access
This menu allows you to configure your phone and to handle the connection to
the network, whether GSM or GPRS, in order to then connect to the
appropriate server that will let you send and receive e-mails.
L
All options described below are operator and/or subscription dependent.
E-mail
61
1
2
Press
,
, select E-mail then Mailbox 1, Settings and press
,.
Select Network Access and press
,.
Bearer
This menu allows you to select the type of network used when launching a
connection. Press
confirm:
<
or
>
to access one of the three choices, then
,
to
Bearer
-
-
GSM
GPRS
GPRS first
WhenselectingGSM or GPRS, your mobile will only use the GSM or the GPRS
network for e-mail connections.
When selecting GPRS first, your mobile will first try to connect to the GPRS
network, then to the GSM network if the GPRS network isn’t available when
launching an e-mail connection.
L
Selecting this option requires you have configured both the GSM and GPRS
settings.
GPRS settings
This menu allows you to enter or change the GPRS settings communicated to
you by your operator, which are:
GPRS Settings
-
-
APN
Login
Password
L
Error messages during connections are mainly due to incorrect parameters: you
should contact your operator before first use, in order to have the appropriate
GPRS parameters.
E-mail
62
The APN (Access Point Name) must be entered as given to you by your
operator, as well as Login and Password.This menu allows you to enter or
change the GPRS settings communicated to you by your operator.
GSM settings
This menu allows you to enter or change the GSM settings communicated to
you by your operator, which are:
GSM Settings
-
-
-
Phone number
Auto deconnect.
Login
Password
The Phone Number field allows you to enter the phone number provided by
your ISP and needed to establish a connection. Press or to select:
ISDN Nber to enter an ISDN ISP number, OR
Analogic Nber to enter an analogic number, then press
<
>
-
-
,.
L
Contact your ISP to know what type of number you should select.
The Auto disconnection field allows you to select an inactivity time period after
which the phone automatically disconnects (if a connection was is progress)
from the network. Press
<
or
>
to select a value from 3 to 10mn and press
,
to validate.
L
The lack of exchanges with the network (connecting, sending an e-mail,
disconnecting) defines the inactivity time period leading to auto disconnection.
Login and Password were up to you when you subscribed to your account.
Enter them also as defined.
E-mail server access
The menus described in this section feature settings needed to connect to the
e-mail server of your Internet Service Provider (ISP) via your mobile phone.
Most parameters are communicated to you from by service provider and must
be entered as given.
1
Press
,, select E-mail then Mailbox 1, Settings and press
,.
E-mail
63
2
Select E-Mail server and press
,.
The fields to be completed are the following:
-
-
-
-
POP3 address
SMTP Address
Login
Password
EMail address
The POP3 address field allows you to enter the IP or DSN address of the POP3
server, which is used to receive e-mails.
The SMTP address field allows you to enter the IP or DSN address of the POP3
server, which is used to send e-mails.
L
Network-dependent! For an e-mail connection via GPRS, if your
phone operator is not your e-mail provider, contact your operator to
get the correct address of his SMTP server and enter it in this field.
In some cases, Login, Password and E-mail address are up to you when you
subscribe to your account. Enter them also as defined.
Advanced
The menus described in this section feature advanced settings that may have
been pre-configured, so that you shouldn’t have to change any of them.
L
If the fields of these menus are empty, or if you encounter connection problems,
contact your ISP.
The fields of this menu are the following:
-
-
-
Port POP3
Port SMTP
DNS address
SMTP Authenticat.
POP3 port field allows you to enter the POP3 port number, which is used to
receive e-mails, and the SMTP port field allows you to enter the SMTP port
number, which is used to send e-mails.
The DNS address field allows you to enter the DNS address of the external
data network you want to connect to. The SMPT authentication item allows
you to activate/deactivate the authentication process with the SMTP server.
L
In most European countries, this menu should be set to Off: your e-mails will
NOT be sent if set to On. Contact your provider for complete information.
E-mail
64
Write and send e-mails
The Send mail menu allows you to send e-mails to one or several recipients at
a time, including with an attachment such as a jpeg image. Once received, your
messages can be forwarded and the attachments visualised with the
appropriate software.
Send mail
To one or several recipients
1
Press
one you wish to use. Select Send mail and press
Move to select Add addressee and press to access the list.
,
and select E-mail, then Mailbox 1 or Mailbox 2 depending on the
,.
2
-
,
L
If you select the phonebook "On SIM card", you will not be able to access any
e-mail address, but an edit window will allow you to enter one. See “Phonebook”
page 41 for information on phonebook selection.
3
4
Select a name in the list and press
,
to add it to your mailing list or press
e
to cancel and go back to the previous sub-menu.
Back to the Addressees list, press
Remove it from the list, or select Add addressee, press
phonebook again and add new names to the mailing list.
, to Change the e-mail address or to
,
to access the
5
6
Repeat steps 2 to 4 to add as many recipients as wanted.
Select Validate list and press . Then enter the subject of your e-mail
(you can leave this field empty) and press
In the next window, enter the text of your e-mail (you can also leave this
field empty). Press when ready to send your e-mail.
,
,.
7
,
L
To learn how to enter text, see “Text or number entry” page 4. If you exit the
Send e-mail menu before sending your e-mail, its content is deleted without
being stored.
8
Select Modify mail and press
e-mail. This takes you back to step 2: follow the instructions from there
to complete the list of recipients and send your e-mail.
,
if you want to change the content of your
Modify mail
Send now
9
Select Send now and press
connects to the Internet server, sends your e-mail to the names present
in your mailing list, then disconnects.
,
to send your e-mail. Your mobile phone
L
You can cancel this operation by pressing and holding the
will then disconnect from the network, exit the e-mail menu and go back to idle.
e
key. Your mobile
E-mail
65
Disconnection also occurs each time you enter the Settings menu while a
connection is in progress. In this case, your e-mail is lost.
Depending on the call settings you configured (see “Call waiting” page 38), you
can receive calls during an e-mail connection. In this case, and if you accept the
incoming call, your phone switches to the call screen context and the e-mail
menu is closed; the phone goes back to idle when you hang up.
With an attachment
Repeat steps 1 to 7 described above. Select Attach file and press
A list appears, showing the available JPEG files. Select the image you wish
to send and press
1
,.
Attach file
2
,.
L
You can only attach one JPEG file at a time. If you exit the Send e-mail menu
before sending your e-mail, its content (including attachment) is deleted without
being stored.
3
Select Modify mail or Send now and press
,
to confirm.
Receive and read e-mails
E-mails are received on a server, which you must connect to in order to
retrieve your e-mails on your mobile phone (some operators send you a SMS
when you receive a new e-mail). You must first download the headers from the
server before retrieving the corresponding e-mails.
Connect to the server
Connection process
1
Press
,
and select E-mail, then Mailbox 1 or Mailbox 2 depending on the
one you wish to use. Select Open mailbox and press
,
.
Open mailbox
2
Your mobile phone automatically connects to the e-mail server and
downloads the e-mails headers. If you didn’t receive any e-mail, List empty
is displayed on the screen. Otherwise, the e-mail headers are displayed in
the form of a list.
3
4
The total number of mails received and pending on the server is displayed
on the top of the screen, as well as the number of pages needed to display
all headers.
Your mobile phone retrieves five e-mails headers at a time. If Next
(respectively Previous) appears at the end (respectively beginning) of the
E-mail
66
list, other e-mails headers are pending: select one of the available options
and press to retrieve them.
,
L
An e-mail without any attachement may be automatically displayed in the details
screen.
Headers information
Select a header, press
,, select Details and press
,
again to see the address
it was sent from, the date and time at which it was sent, its subject and the size
of the attachement if any. The following status icons may appear in regards to
each header:
[No icon]
The e-mail can be downloaded.
The e-mail size is too large, it cannot be downloaded.
The e-mail is marked to be deleted (see page 69).
Download e-mails
Simply select one of the retrieved e-mail headers and press
Get mail and press to download the e-mail. Repeat this operation to
download each e-mail corresponding to each selected header.
You can also press to access the e-mail header’s carousel and select Get
,. Then select
,
Get mail
L
,
mail from the available options. If the e-mail is too big (over 7 KB), it is rejected
and the download is cancelled.
Get and store attachments
If the e-mail you have received contains attachments (JPEG image, text file or
another e-mail), they are characterised by a specific icon:
Contains the details of the e-mail header (date and time,
sender’s e-mail address, etc.), press to display these details.
The text of the e-mail itself can viewed as an attachment, press
toreadit. Thereisn’t any advanced options inthiscase: it can
,
,
be read, but not stored nor forwarded.
A text file (text only, ".txt" format) is attached to the e-mail,
press
either.
,
to read it. There isn’t any advanced options in this case
The application needed to manage this attachment isn’t available
in your phone, or the e-mail is too large to be uploaded.
[Mail icon] Another e-mail is attached to the one you received (up to five
e-mails can be attached one after the other). There isn’t any
E-mail
67
advanced options for an attached e-mail: it can be read, but not
stored nor forwarded.
An image at the JPEG format is attached to this e-mail. Select the
attached image in the list and press
mobile phone (you can rename it if you wish).
,
twice to store it in your
L
You must have stored an image before being able to visualise it via the Picture
album menu. See “Images album” page 24 for detailed information on this
subject. If there isn’t enough memory to store the new image, you must delete
an item (name, event or image) to be able to store a new one.
An image may not be accepted by your mobile phone if it is too large, or if it
doesn’t have the right file format. When receiving an image via e-mail, proceed
as follows to obtain optimal results:
-
The image received must have been saved in JPEG format, eventually
featuring the extension JPG, JPE or JPEG.
-
-
The size of the image file should not exceed 7 KB.
The optimal size is 101 x 69 pixels (maximum height is 160 pixels, and
maximum width 128 pixels), in 24 bits in order to be displayed correctly. We
recommend you use a standard picture editing software to find the size of
the image you want to send to your mobile phone.
-
Use a filename of maximum 10 characters. You can then add an extension
such as ".jpg".
Add an e-mail address to the phonebook
L
You must have selected the phonebook in your phone to be able to add an e-mail
address; this menu item will NOT appear if you selected the SIM phonebook.
You can add the sender’s e-mail address to your phonebook, even when you
haven’t yet downloaded his e-mail (retrieving the header only is sufficient to
access the e-mail address).
Add to names
1
2
Select an e-mail header, then press
Select Add to names and press . Then select:
<new> to create a new name, enter first and last name then add the
,
to access the carousel options.
,
-
-
associated e-mail address, or
a name in the list and press
,
to add the e-mail address to this
name card. If it already contains an e-mail address, you will be
prompted to press to replace it.
,
E-mail
68
Delete e-mails
1
Select the e-mail to be deleted and press
,
to access the options.
Delete
2
,
A small icon allows you to spot the header(s) of the list corresponding to
the e-mail(s) to be deleted.
L
To unmark the e-mail to be deleted, select this option again.
3
When you exit the E-mail menu, you will be asked to confirm deletion of
the selected item(s) from the e-mail server. Press
to cancel (in this case, the marked e-mails remain in the list and aren’t
,
to confirm or
e
marked to be deleted anymore).
Reply to an e-mail
1
Select the header of the e-mail you want to reply to, press
the options menu, then select Reply and press
,
to access
,.
Reply
2
The address of the sender, which you can modify (see “To one or several
recipients” page 65), is automatically added to the Addressees list. Select
Validate list and press
A new screen appears, that contains the subject of the received e-mail
preceeded with Re: standing for "Reply". Press
Enter the text of your mail, then press to send it: select Send now and
press to send your reply.
Forward an e-mail
,.
3
4
,.
,
,
In order to forward an e-mail to another recipient, you must first have
downloaded it (see“Download e-mails” page 67). From the Forward to option,
proceed as described above in “Reply to an e-mail”.
Forward to
L
In both cases (reply to an e-mail or forward it), your phone will disconnect from
the server when reaching the network inactivity time out set in the Auto
disconnection menu (see “Bearer” page 62). It will reconnect to this server
when sending the e-mail.
E-mail
69
10 • WAP services
Introduction
Most items of the Operator Services Oper. Services
menu (e.g. Service numbers, Services +)
are subscription-dependent and specific
Service numbers
WAP
to operators: your mobile phone readily
Advanced
supports them if they are included in your subscription.
Consequently, the menus shown opposite may or may
not be available. The WAP option (independent from
the two other options shown above), is described below
in detail. Contact your network operator for detailed
information on availability and rates.
Images / Status icons /
Download fun URL
Access settings
Show Activate
Change
Help
/
/
/
Launch
Favourites
Delete
L
The services provided may involve making a phone call
or sending a SMS for which you may be charged.
Contact your operator before initial use, in order to
make sure your subscription supports the WAP feature
and your phone has the appropriate WAP parameters.
With some operators, WAP access parameters can be
set remotely. Please check directly by your operator.
/
GotTo
Change
Last page
Alerts
Services +
WAP
Your mobile phone supports services based on the Wireless Application
Protocol (WAP). The built-in WAP browser will allow you to access services
supplied with your network, such as news, sports, weather, timetables, etc.
Launch
Your phone may have been pre-configured to directly access the services
offered (if not, see “Favourites” page 71). The Launch menu allows you to
access the online services provided with your operator. There are 2 ways to
access these services:
Launch
•
•
In idle mode, press and hold
@, or
In idle mode, press , select Oper. Services, WAP, Launch and press
,
,.
70
An animation shows the phone is connecting to the homepage. Once the
browser is launched, you are connected to your operator’s homepage. The
following commands enable you to navigate through the WAP pages:
• Move
• Press
• Press
• Press
+
or
-
to navigate the online pages.
,
to select an highlighted item.
to select the left or right option box displayed on the screen.
to return to the previous page.
@
e
• Press and hold
e
or
@
to end the online session.
Browse
During navigation, press
options (subscription dependent):
*
to access a special menu with the following
• Reload to reload the last card viewed.
• Mark site to add the previous deck to the user’s bookmark list (network
dependent).
• About... displays browser version and copyright information.
• Advanced displays a menu containing advanced commands:
-
-
-
Show URL: to display the URL of the previous card,
Goto URL: to fetch the content of the URL entered,
Restart UP. browser: to empty the contents of the cache memory
and create a new session.
• Exit: to quit the WAP application and return to idle mode.
• Bookmarks to display the stored bookmarks.
• Security to display the security administration options (current certificates,
authentication, encryption, etc.). Also available via a long press on
• long press on to requests the page bookmarked by Mark site
(subscription dependent).
0),
1
9
Favourites
Allows you to store direct links to your favourite WAP pages.
Select Favourites and press , thenselect <New>, enter the name of the
WAP page of your choice (e.g. "Philips") and press
Then enter the URL address of the homepage (e.g. http://
wap.pcc.philips.com) and press to store it.
Favourites
1
,
,
.
2
,
Entering this menu again allows you to Delete, Goto or Change this Favourite.
WAP services
71
Last page
Allows you to access the last pages browsed without reconnecting to online
services.
Last page
Advanced
This menu allows you to customise the way the pages are displayed on your
phone and to define the URL address that will allow you to download
iMelodies, pictures and animations.
Advanced
Images
To activate/deactivate the downloading of images attached to WAP pages. The
Off setting speeds up the global downloading time of the pages browsed.
Images
Status icons
To activate or deactivate the header display. Deactivating this function allows
you to gain an extra line of text on your screen.
Status icons
Download fun URL
To enter or change the URL of the Download fun server (depending on your
subscription, this field may be locked, preventing re-programming).
Down. Fun URL
L
Some pictures may have a specific file format, so that even though they are
displayed on the screen during a Wap session, you won’t be able to save them
in your phone.
Access settings
Several WAP profiles are available, which allow you to personnalize different
WAP accesses. If your phone was pre-configured, it shouldn’t be necessary for
you to change the connection access settings. Nevertheless, depending on your
subscription, you may configure the parameters described further.
Access settings
L
All options described below are operator and/or subscription dependent.With
some operators, you may be sent a SMS which contains new WAP access
parameters that will be stored automatically. Please contact your network
operator for detailed information on this subject.
The three access settings available in this menu are the following:
-
-
Show
Activate
Change
WAP services
72
Each of these settings allows you to:
-
Visualise all parameters of the selected WAP profile (Gateway IP
Address, Homepage address, phone number, etc.), either GSM or
GPRS,
-
-
Activatethe selected profile (which then becomes the default profile
and is used for connection when pressing
@),
Change the parameters of the WAP profiles as described below.
L
Some pre-configured profiles might be locked, preventing re-programming.
Change name
Allows you to enter or change the name of the selected WAP profile. Press
enter the name of your choice and press to confirm.
,,
,
Change name
GSM settings
Allows you to enter or change the GMS settings and gives you access to the
following items:
GSM settings
-
-
-
Login
Password
Phone number
Inactivity time
Login and Password allow you to enter the login and password needed. In both
cases, enter the information and press to confirm.
,
Phone Number allows you to enter the phone number needed to establish a
connection with your WAP Service Provider (ISP). Select Phone numbers and
press
,
, then press
- ISDN No. to enter an ISDN ISP number, OR
+
or
-
to select:
- Analogic No. to enter an analogic number, then press
Enter the "+" sign followed by the number provided by your operator and press
,.
,.
L
Contact your operator to know what type of number you should select.
Inactivity time allows you to enter an inactivity time period after which the
phone automatically ends the WAP session (if a connection was in progress)
and returns to idle screen. Select Inactivity time and press
value (in second) of over 30 s. and press
,, then enter a
,.
GPRS settings
Allows you to enter or change the GPRS settings and gives you access to the
following items:
GPRS settings
WAP services
73
-
-
-
Login
Password
APN
Inactivity time
Login, Password and Inactivity time are the same fields as for GSM settings.
Please refer to the previous section for information.
APN allows you to enter the address of the external data network you want to
connect to, a text string or IP address (e.g., wap.operatorname.fr) used to
establish the connection with your WAP Service Provider (ISP). Select APN
and press
,, then enter the approriate address and press
,.
L
Error messages during WAP connections are mainly due to incorrect parameters:
you should contact your operator before first use, in order to have the
appropriate WAP and GPRS parameters. With some operators, WAP access
parameters can be set remotely. Please check directly by your operator.
Gateway
Allows you to enter or change the IP address and port number (subscription
dependent) for the gateway: select Gateway and press , then enter the IP
Address and press
,
Gateway
,.
Homepage
Allows you to enter the WAP address of the homepage, the first page displayed
when accessing the WAP services. Select Homepage and press . Then enter
This feature is network-dependent: if the operator’s gateway gives an URL, it will
have priority on the Homepage URL you defined.
,
Homepage
,.
L
Bearer
Allows you to select the type of network used when launching a WAP session
and gives you access to the following items:
Bearer
-
-
GSM
GPRS
GPRS first
When selecting GSM or GPRS, your mobile will only use the GSM or GPRS
network for WAP connections. When selecting GPRS first, it will first try to
connect to the GPRS network, then to the GSM network if the GPRS one isn’t
available when launching WAP.
WAP services
74
11 • Other operator services
Introduction
Most items of the Operator Services menu Oper. Services
(e.g. Service numbers, Services +) are
subscription-dependent and specific to
operators: your mobile phone readily
Service numbers
WAP
Access Settings
supports them if they are included in your subscription.
Consequently, the menus shown opposite may or may not be
available. Contact your network operator for detailed
information on availability and rates.
Help
Launch
Settings
Services +
L
The services provided may involve making a phone call or
sending a SMS for which you may be charged.
GSM strings
The phone supports standard GSM strings that can be sent from the keypad to
the network and used to activate services provided by the network.
• Example n° 1
Press * 4 3 #, then
• Example n° 2
(, to activate the Call Waiting service.
Press * # 3 1 #, then
has been sent.
(
, to know if the mobile identification
• Example n° 3
Press * 6 1 #, then
reply.
(, to activate the feature call forward if no
• Example n° 4
Press * 6 2 #, then
unreachable.
(, to activate the feature call forward if
L
Contact your network operator for detailed information on GSM strings.
75
Query a voice server, voice mailbox, messaging
service, etc. (DTMF tones)
Some phone services (such as phone answering machines and pagers) require
your phone to transmit DTMF tones (Dual Tone MultiFrequency), also known
as “touch tones”. These are used to communicate passwords, callback
numbers, caller choices, and so on.
You can send DTMF tones at any time during a call by pressing any of the keys
0
to
9
,
*
and
#. You can also attach a DTMF sequence to a phone
number before dialling it (or storing it in the Phonebook). The phone number
and the DTMF part must be separated by a wait character.
Pause and wait characters
To obtain a pause or wait character, press and hold
#. The display shows w
for a wait and p for a pause. The phone always interprets the first pause
character as a wait character. When you dial a number containing a wait
character, your phone dials the first part (the phone number) and then waits for
the call to be connected before sending the rest of the digits as DTMF tones.
Any subsequent pause character is an ordinary pause that generates a delay of
2.5 seconds.
Access your answering machine (example)
To hear all messages (e.g. code 3) on your answering machine (password 8421)
at phone number 12345678, you could call: 12345678w8421p3.
The phone dials 12345678 and waits for the call to be connected. When
connected, the phone transmits 8421 (the password), pauses 2.5 seconds, and
then sends the last digit. If you find that 2.5 seconds is not long enough for your
needs, you can enter several pause characters one after the other to increase
the pause time.
Make a second call
You can make a second call during an active call or during a call on hold. You can
switch between the two calls (the cost displayed on the screen depends on
local charge rate).
Other
76
operator
services
1
2
3
While already on the phone, dial a number then press
is put on hold and the number is displayed at the bottom of the screen.
The second number is then dialled.
(. The first call
To toggle between the two calls, press
time that you toggle from one call to another, the active call is placed on
hold and the call which was on hold is activated.
,
then select Switch calls. Each
To hang up the active line, press
on hold remains as such.
). The active line is hung up and the call
4
To end the call on hold, use Switch calls to reach it, then press
).
L
Notes:
The second number can be dialled either from the keypad or from:
•
the phonebook, by pressing
-, then selecting the name to be called,
•
the Call list, by pressing , then selecting the number to be called.
+
Answer a second call
You are able to receive another call when already in communication (if this
feature is available with your subscription). When you receive a second call the
phone emits an alert beep and the screen displays Call waiting.
L
Warning! To receive a second call, you must have:
•
•
•
subscribed to this feature,
deactivated the Call forward option for voice calls (see page 35),
activated the Call waiting option (see page 37).
If you receive a second call, press
• accept the second call: the first one is put on hold, the second one is active.
If you want to toggle between the two calls, press then select Switch
,, then you can:
,
calls. Each time you toggle from one call to another, the active call is put on
hold and the call which was on hold is then activated. To introduce the new
Conference
caller into a conference press
,
and select Conference.
• reject the second call
• end the active call, then your incoming call is ringing.
Notes:
If you also wish to answer the incoming call, press
L
•
(; to reject it, press
)
.
Other
77
operator
services
•
If you have activated call forwarding ‘If Busy’ (see “Call forward” page 35),
you will never receive second calls since they are always forwarded when
the line is busy.
Answer a third call (Subscription dependent)
While in communication and one call being on hold, you may receive a third
call. The phone emits an alert beep. You can either end one of the calls before
being able to answer the third one or introduce the calling party into a
conference (see below). This service is limited to two current communications
(one active and one on hold).
Conference Call (Subscription dependent)
You can activate the conference call by making consecutive outgoing calls, or
Conference
create it from a multiparty call context. You may have up to five members at the
same time and end the conference with
disconnected.
). At this point all calls are
In order to make consecutive outgoing calls, first initiate a normal call with the
first number of the conference. When the first member is on line, initiate a
second call as described in “Make a second call” above. When the second call
is engaged, press
members are connected.
,
and select Conference. Repeat the above process until five
If there is an incoming call during the conference call, and if there is less than
five members, you can accept this new call by pressing
,. Press
,
again and
then select Conferenceto add this member to the conference call. If there is an
incoming call during a conference with five members already connected, you
can answer this new incoming call, but not add it to the conference.
While a conference call is in progress, press
options. Disconnect a member of the conference by selecting Remove party
and pressing to confirm, or select Private call to have a private call with this
,
to access the Conf. members
,
member only (other members are put on hold).
Explicit Call Transfer (Subscription dependent)
You can connect an active call and a call on hold. You are disconnected when
the transfer is completed. During a call press
This feature is different from the Call forward, which takes place before you pick
up the call (see page 35).
,, select Transfer and press
,.
L
Other
operator
services
78
Precautions
Radio waves
•
Your phone transmits/receives radio waves in the GSM frequency (900 /
1800MHz).
•
•
•
The GSM network controls transmission power (0.01 to 2 watts).
Your phone complies with all relevant safety standards.
The CE mark on your phone shows compliancy with Europeen electromagnetic
compatibility (Ref. 89/336/EEC) and low voltage directives (Ref. 73/23/EEC).
Your cellular mobile phone is your responsibility. To avoid damage to yourself, to
others or to the phone itself, read and follow all the safety instructions and make
them known to anyone borrowing your phone. Furthermore to prevent
unauthorised use of your phone:
•
•
•
Keep your phone in a safe place and keep it out of small children's reach.
Avoid writing down your PIN code. Try to remember it instead.
Switch off the phone and remove the battery if you are going to leave it unused
for a long time.
•
Use the Securitymenu tochange the PIN code after purchasing the phone and to
activate call restriction options.
The design of your phone complies with all applicable laws and regulations. However
your phone may cause interference with other electronic devices. Consequently you
should follow all local recommendations and regulations when using your
cellular phone both at home and when away. Regulations on the use of cellular
phones in vehicles and aircraft are particularly stringent.
Your cellular mobile phone is a low power radio transmitter and receiver
.
When it is operating, it sends and receives radio waves. The radio waves carry your
voice or data signal to a base station that is connected to the telephone network.
The network controls the power at which the phone transmits.
Public concern has been focused for some time on the possible health risks for users
of cellular phones. The current research on radio wave technology, including the
GSM technology, has been reviewed and safety standards have been drawn up to
ensure protection from exposure to radio wave energy. Your cellular telephone
complies with all applicable safety standards and the Radio Equipment and
Telecommunications Terminal Equipment Directive 1999/5/EC.
80
Inadequately protected or sensitive electronic equipment may be affected by
radio energy. This interference can lead to accidents.
Always switch off your phone
• Before boarding an aircraft and or when packing the phone in your luggage.
• In hospitals, clinics, other health care centres and anywhere else where you may
be in the close vicinity of medical equipment
.
• If you are a user of a pacemaker or hearing aid, or expect to use your cellular
phone in the immediate vicinity of someone who does, then take the
precautionary steps described below.
-
Consult your physician and pacemaker or hearing aid manufacturer to
learn whether your particular device is susceptible to cellular phone
interference.
-
Carry and hold your cellular phone at safe distance from the implanted
pacemaker device and electrode (20 cm is generally accepted as a "safe
distance", however it is advisable to check with your physician and
pacemaker manufacturer).
Always switch off your phone and do not remove the battery
• In areas with a potentially explosive atmosphere (e.g. petrol stations and also
areas where the air contains dust particles, such as metal powders).
• In a vehicle transporting flammable products (even if the vehicle is parked) or a
vehicle powered by liquefied petroleum gas (LPG), check first that the vehicle
complies with the applicable safety rules.
• In areas where you are requested to turn off radio transmitting devices, such as
quarries or other areas where blasting operations are in progress.
Check with the vehicle manufacturer that electronic equipment used in your
vehicle will not be affected by radio energy.
In order to improve the performance of your phone, reduce radio energy
emission, reduce battery consumption and ensure safe operation adhere
to the following guidelines:
• For the optimal and satisfactory operation of the phone you are recommended
to use the phone in the normal operating position (when not using in hands-free
mode or with a hands-free accessory).
• Do not expose your phone to extreme temperatures.
• Treat the phone with care. Any misuse will void the International Guarantee.
81
•
Do not immerse the phone in any liquid ; if your phone is damp, switch it off,
remove the battery and let them dry for 24hrs before using them again.
To clean the phone, wipe it with a soft cloth.
Placing and receiving calls consumes the same amount of battery energy.
However, the mobile consumes less energy in idle screen when kept in the same
place. When in idle screen and while you are moving, your phone consumes
energy to transmit updated location information to the network. Setting the
backlight for a shorter period of time as well as avoiding unnecessary navigating
in the menus will also help to save the battery’s energy for longer phoning and
stand-by performances.
•
•
Information displayed on the battery
•
•
•
•
•
Your phone is powered by a rechargeable battery.
Use specified charger only.
Do not incinerate.
Do not deform or open the battery.
Do not allow metal objects (such as keys in your pocket) to short circuit the
battery contacts.
•
Avoid exposure to excessive heat (>60°C or 140°F), moisture or caustic
environments.
You should only use Philips Authentic Accessories, as the use of any other
accessories may damage your phone and will make all guarantees for your Philips
phone null and void.
Make sure damaged parts are replaced immediately by a qualified technician and that
they are replaced with genuine Philips replacement parts.
Do not use your phone while driving
It lowers concentration, which can be dangerous. Adhere to the following
guidelines:
•
•
•
Give your full attention to driving. Pull off the road and park before using the
phone.
Respect the local regulations in countries where you drive and use your GSM
phone.
If you want to use your phone in a vehicle, install the hands-free car kit which is
designed for that purpose, still ensuring you give full attention to driving.
82
• Ensure that your phone and car kit do not block any airbags or other security
devices fitted in your car.
• The use of an alarm system to operate a vehicle's light or horn to indicate
incoming phone calls is prohibited on public roads in some countries. Check local
regulations.
EN 60950 Norm
In case of hot weather or after a prolonged exposure to the sun (e.g., behind a
window or a windscreen), the temperature of your phone's casing might increase,
especially when featuring a metallic finish. Be very careful in this case when picking
up your phone and also avoid using it with an ambient temperature over 40°C.
Environmental care
Remember to observe the local regulations regarding the disposal of your packaging
materials, exhausted batteries and old phone and please promote their recycling.
Philips has marked the battery and packaging with standard symbols designed to
promote the recycling and appropriate disposal of your eventual waste.
Battery:
The crossed-out dustbin signifies that the battery should not be
disposed of with general household waste.
Packaging:
The mobius loop symbol signifies the labelled packaging material is
recyclable.
The green point symbol signifies that a financial contribution has been
made to the associated national packaging recovery and recycling
system (e.g. EcoEmballage in France).
The chasing arrows symbol on the plastic tray and plastic bag indicate
that the materials are recyclable and also identifies the plastic material.
83
Troubleshooting
PROBLEM
SOLUTION
The phone does
not switch on
Remove and reinstall the battery (see page 8). Then charge the
phone until the battery icon has stopped flashing. Finally, unplug
from the charger and try to switch the mobile on.
The display shows
BLOCKED when
you switch on
Somebody tried to use your phone but didn’t know the PIN code
nor the unblocking code (PUK). Contact your service provider.
The
symbols are not
displayed
n
and
q
The network connection is lost. Either you are in a radio shadow
(in a tunnel or between tall buildings) or you are outside the
network coverage area. Try from another place or contact your
network operator for assistance/information about the network.
The display doesn't The display responds more slowly at very low temperatures. This
respond (or is normal and does not affect the operation of the phone. Take the
responds slowly) to phone to a warmer place and try again.
key pushes
In other cases please contact your phone supplier.
Your phone doesn’t
go to idle screen
Press and hold
e, or switch off the phone, check that the SIM
card and the battery are installed correctly, and switch it on again.
Your phone doesn’t This feature is network and subscription dependent. If the network
display the phone
numbers of
incoming calls
doesn’t send the caller’s number, the phone will display Call 1
instead. Contact your operator for detailed information on this
subject.
You can’t send text Some networks don’t allow message exchanges with other
messages
networks. Contact your operator for detailed information on this
subject.
You can’t receive
An image may not be accepted by your mobile phone if it is too
and/or store JPEG large, or if it doesn’t have the right file format. See page 66 for
images complete information on this subject.
84
When charging the Only charge the battery in an environment where the temperature
battery, the does not go below 0°C (32°F) or above 50°C (113°F).
battery icon shows In other cases please contact your phone supplier.
no bars and the
outline is flashing
You are not sure
that you are
receiving calls
properly
To receive all calls, make sure that none of the features
"Conditional call forward" or "unconditional call forward" is
activated (see page 35). This network and subscription dependent
feature may display one of the following icons:
F
f
call forward unconditional to number
call forward unconditional to voice mailbox
When attempting
to use a feature in
the menu, the
mobile displays not
allowed
Some features are network dependent. They are only available,
therefore, if the network or your subscription supports them.
Contact your operator for detailed information on this subject.
The display shows
SIM failure
Check that the SIM card has been inserted in the right position
(see page 8). If the problem remains, your SIM card may be
damaged. Contact your operator.
The display shows
IMSI failure
This problem is related to your subscription. Contact your
operator.
The display shows
Insert your SIM
card
Check that the SIM card has been inserted in the right position
(see page 8). If the problem remains, your SIM card might be
damaged. Contact your operator.
Yourphonedoesn’t A car contains many metallic parts that absorb electromagnetic
work well in your
car
waves which can affect the phone’s perfomances. A car kit is
available to provide you with an external antenna and enables you
to phone without handling the handset.
L
You should check with local authorities if you are allowed to phone
while driving.
85
Glossary
Call barring
Enables you to restrict or bar certain or all types of calls to and from
your mobile phone, i.e. outgoing calls, outgoing international calls,
incoming calls. Barring is activated with a personal code. To use this
service, it must be supported by your network and by your phone.
You may also have to add this service to your subscription.
Call forwarding
Call restriction
calls will be automatically rerouted.
Enables you to restrict or bar certain or all types of calls to and from
your mobile phone, i.e. outgoing calls, outgoing international calls,
incoming calls. To use this service, it must be supported by your
network and by your phone. You may also have to add this service to
your subscription.
Call transfer
Cell broadcast
GPRS
Enables you to transfer a caller to another number. To use this
service, it must be supported by your network and by your phone.
You may also have to add this service to your subscription.
Used now in GSM particularly, this paging service allows an operator
to spread short information messages to all or dedicated subscriber
surrounding a cell or a region.
Generalised Packet Radio Service - GSM network structure and
methods development in terms of data connectivity with a high speed
rate and dynamic allocation.
GSM
Global System for Mobile communications - Digital wireless
telecommunications standard widely used throughout the world and
used by your phone. GSM 900 uses 900 MHz frequency band,
whereas GSM 1800 uses 1800 MHz frequency band (see “Other
operator services” page 75).
Home Zone
A particular area within your home network. If this feature is
provided by your home network, the home zone symbol is displayed
indicated that you are currently within the home zone.
Local network
The network where you are making a call. This may be your home
network or another GSM network.
86
PIN
Personal Identification Number - An optional code used for all
GSM-based phones to establish a personal authentication access to
the phone menu. The PIN code is commonly given with your
subscription and is the secret code of the SIM card.
PIN2
Another authorisation code which is used only for special services.
Function that allows you to restrict dialling to selected numbers.
Public Names
PUK
Personnal Unblocking Code - Used to unlock a blocked SIM card by
entering a wrong PIN code 3 times. This is not commonly delivered
with your subscription and several operators may apply a severe cost
on this type of service.
PUK2
Roaming
URL
Used to unlock a blocked SIM card by entering a wrong PIN2 code 3
times.
Traveling outside a wireless carrier's or subscriber's local or home
coverage area. There is usually an additional charge for roaming.
Uniform Resource Locator - URLs are the Internet equivalent of
addresses. Like other types of addresses, they move from the general
to the specific (from zip code to recipient, so to speak), e.g.,
http:/ (protocol)
/mobilephones/ (directory in which the file index.html resides).
WAP
Wireless Application Protocol - Organised and regulated by the
WAP forum, WAP gives the opportunity to GSM network operator
to run specific applications on a wireless network in using the
Internet technology adapted to wireless phones.
87
Philips authentic accessories
When performance counts... Philips Authentic Accessories are designed to
maximise the performance of your Philips mobile phone.
CHARGERS
Cigarette Lighter Adapter 12-24 V
CKLR 12/P - 9911 240 34118
• Charges the battery while you use your phone.
• Plugs into virtually any vehicle power outlet.
Fast Travel Charger 90-240 V
ACSR 12/P - 9911 240 30042
• Charges your battery in any AC outlet.
• Small enough to carry in a briefcase or handbag.
• Charging time between 75 and 120 minutes,
depending on battery type and use.
Taiwan/USA: ACTR 12/P - 9911 240 30043
United Kingdom: ACUB 12/P - 9911 240 30044
Australia: ACAR 12/P - 9911 240 30045
China: ACCR 12/P - 9911 240 30054
HANDS-FREE KITS
Compact car kit
CKSK 20/P - 9911 240 34306
CKFX 62/P - 9911 240 34435
• Designed to operate your Philips mobile phone
hands-free, using the built-in speakerphone unit and
the mobile’s microphone.
• Simply plug the kit into the vehicle auxiliary outlet.
• Easy to use, this compact hands-free solution offers
a high audio quality while also charging your mobile.
Deluxe car kit
• External antenna connection for optimum reception
and transmission quality.
• No separate loudspeaker necessary as the call
connects directly to your audio system.
• Automatic radio mute function on incoming call.
• Full package including cradle.
88
Cradle with RF connector
CKFR 62/P - 9911 240 34508
• This cradle simplifies and secures the use of your
phone in a car. The antenna connection enhances the
reception quality.
Deluxe and extra-deluxe hands-free headsets
• In-line answer button offers you a simplified
alternative to searching for the phone keypad: you
answer an incoming call just by pressing the button.
In idle mode, a long press activates the voice dial.
• Xtra Deluxe headset is a painted version featuring
high quality metallic finish.
Deluxe headset
HSLD 15/P - 9911 241 30024
Xtra Deluxe headset
HSUX 38/P - 9911 241 31006
L
In certain countries, telephoning while driving is
prohibited. For safe and trouble free installation, we
recommend that specialized technicians install hands-
free car kits.
USB DATA CONNECT
•
Easy data connection to your Philips mobile phone:
no need for a PCMCIA card as the modem is built in
your handset. Just connect your phone into your
laptop via the data cable and you can then send faxes
and SMS messages, access data communication
facilities on mobile networks and connect to the
Internet.
DCCX 38/P - 9911 241 39224
L
The USB data connect kit isn’t compatible with Apple®
Macintosh® computers. It is only supported by
Windows® 98, 2000 and XP.
To maximise the performance of your Philips phone and not to void the warranty, always purchase Philips Authentic
Accessories that are specially designed for use with your phone. Philips Consumer Communications cannot be held liable for
any damage due to use with non authorised accessories. Ask for Philips Authentic Accessories where you purchased your
Philips Phone.
89
Declaration of conformity
We,
Philips France
Mobile Telephony Business Creation Team
Route d’Angers
of
72081 Le Mans cedex 9
FRANCE
declare under our sole responsibility that the product
CT 3329
Cellular Mobile Radio GSM 900/GSM 1800
TAC: 350054
to which this declaration relates, is in conformity with the following Standards:
EN 60950, EN 50360 and EN 301 489-07
EN 301 511 v7.0.1
We hereby declare that all essential radio test suites have been carried out and that
the above named product is in conformity to all the essential requirements of
Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10(5) and detailed in
Annex V of Directive 1999/5/EC has been followed related to articles 3.1 and 3.2
with the involvement of the following Notified Body:
BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12
4RQ, UK
Identification mark: 0168
The technical documentation relevant to the above equipment will be held at:
Philips France, Mobile Telephony Business Creation Team
Route d’Angers
72081 Le Mans cedex 9
FRANCE
Le Mans, July 08, 2002
Jean-Omer Kifouani
Quality Manager
|