Samsung TwoStep SCH R470 User Manual

“Emergency #” on page 122.)

Tip: You can cycle between T9 Word

Abc, and 123 by repeatedly pressing

and holding until the input mode label changes.

Section 3: Call Functions

This section explains how to make and answer calls. This section

also includes the features and functionality associated with

making or answering calls.

Important!: Because of various transmission methods, network parameters,

and user settings necessary to complete a call from your

wireless phone, a connection cannot always be guaranteed.

Therefore, emergency calling may not be available on all

wireless networks at all times.

Making a Call — Number Entry Dialing

1. With the phone on, enter the number you wish to call using

the keypad.

Important!: DO NOT depend on this phone as a primary method of calling

911 or for any other essential or emergency communications.

2. Press

to place the call.

Dialing International Numbers

Call Another Country — Manual

Method

Dialing Emergency Numbers

To place an emergency call:

1. With the phone on, enter 911 using the keypad.

1. In standby mode, enter 011

(the three-digit exit code for

the United States).

2. Press

to place the call.

You can specify other numbers as emergency numbers using the

Emergency # settings. (For more information, refer to

2. Enter the country code for the

country that you are calling.

Important!: Emergency number 911 is preset into your phone. You can dial

this number almost any time, even when the phone is locked or

restricted.

3. Enter the number that you

wish to call, then press

If you call 911 an audible tone is heard and an Emergency

prompt appears in the display for the duration of the call.

Call Functions

Note: Puerto Rico and Canada are on the North American dialing plan.

Making calls to Puerto Rico and Canada is similar to making calls

within the United States, no unique country codes are necessary.

Tip: If you place most or all of your

international calls to numbers in the

same country, set-up the International

Dialing shortcut to dial that country’s

code for you. (For more information,

refer to “International Dialing” on

page 120.)

Call Another Country — Shortcut

Method

1. In standby mode, press and

Note: When you press

, your phone

hold

until a plus sign (+)

automatically replaces the second +

with the two-digit country code you

have selected for the International

Dialing shortcut.

appears in the display.

Note: When you press

, your phone

automatically replaces this + with

011, the three-digit exit code for the

United States.

3. Enter the number that you wish to call, then press

Manual Pause Calling

2. Enter the country code for the

When you call automated systems (like banking services), you

are often required to enter a password or account number.

Instead of manually entering the numbers each time, you can

store the numbers in your Contacts along with special characters

called pauses.

country that you are calling, or

press and hold

until a

second plus sign (+) appears

in the display.

To manually call a number with pause(s) without storing it to your

Contacts:

1. Enter the number you wish to call.

2. Press the Options soft key. A pop-up menu containing the

2. Enter the first few letters of a Contacts list entry name. (For

more information, refer to “Entering Text” on page 35.)

The Contacts list displays the first few entries with names

matching the letters you entered.

following options appears in the display:

•

2-Sec Pause — P pause — A two-second pause stops the

calling sequence for two seconds and then automatically sends the

remaining digits.

3. Highlight the Contact you wish to call and press

. (For

Wait — W pause — A hard pause stops the calling sequence until

you press

more information, refer to “Understanding Your Contacts”

3. Highlight the desired pause option.

on page 39.)

4. To enter the highlighted pause into your number sequence,

Making a Call — Speed Dialing

press

Speed Dialing lets you quickly and easily dial any contact in your

Contacts list by using that contact’s location number in the list.

You can assign and change location (speed dial) numbers for

your contacts. (See “Assignment During Entry Creation” on

page 47.)

Note: If you select 2-Sec Pause, P appears in the display. If you select Wait,

W appears in the display.

5. Press

to call the number.

One-Touch Dialing

Making a Call — Contact Dialing

Speed Dial numbers 2 through 9 are special One-Touch dialing

numbers. You can call the phone numbers stored in your phone’s

Contacts list and assigned Speed Dial numbers 2 through 9 by

pressing and holding a single key.

You can store phone numbers and contact names in your phone’s

Contacts list. To call one of your Contacts, do the following:

1. Press the Contacts soft key. The Contacts Find screen

appears in the display.

Example: For Speed Dial number 3, press and hold the

key until the

name and number appear in the display and the number is dialed.

Call Functions

Two-Touch Dialing

Making a Call — Quick Search Dialing

Memory locations 10 through 99 are special Two-Touch dialing

locations.

Use the Quick Search feature to dial

any number stored in your Contacts

list by pressing the number keys that

correspond to the first few letters of

a Contact name. (For more

Example: For location number 13, briefly press

, then press and hold

until the name and number appear in the display and the number is

dialed.

information, refer to “Quick Search”

on page 125.)

Three-Touch Dialing

Quick Search Dialing a Contact

Memory locations 100 through 999 are special Three-Touch

dialing locations.

To find and dial a Contact, do the

following:

Example: For location number 113, briefly press

, briefly press

1. In standby mode, press the number keys that correspond

again, then press and hold

until the name and number appear

in the display and the number is dialed.

to the first few letters of the Contact name, as shown.

2. Press the Up navigation key.

The Contacts list screen

Pause Dialing From a Contacts Entry

•

If you speed dial a contact that contains (two-second) P pause(s)

simply wait for the pauses to pass and the dialing to complete.

appears showing the desired

Contact name, as shown.

•

If you speed dial a contact that contains (hard) W pause(s), wait for the

appropriate prompt(s) from the number you are calling (credit card

number, bank account number, and so on) and enter the appropriate

response(s).

3. If needed, use the Up and

Down navigation keys to

highlight the Contact you wish

to call.

4. Press

to call the highlighted Contact. (For more

“Say a Command” appears in the display and is

information, refer to “Understanding Your Contacts” on

pronounced through the earpiece.

the list. (For more information, refer to “Choice Lists” on

2. Say, “Call”.

Making a Call — Voice Dialing

You are prompted to “Say the name or #”.

Your TwoStep mobile phone includes state-of-the-art voice

recognition software that lets you dial numbers using your voice.

3. Speak clearly and say the name of a person in your

Contacts list, first name followed by last name.

Using Voice Dial

If the name is recognized, Voice Dial repeats the name and

dials the number.

Use the Voice Dial command to dial any number stored in your

Contacts list by saying the name of the contact (Name Dialing).

You can also use Voice Dial to dial any valid telephone number,

even numbers not stored in your Contacts list, by speaking the

individual digits in the number (Digit Dialing).

If Voice Dial is not sure which name you said, it displays a

choice list of up to three names and prompts you with “Did

you say?” followed by the first name on the list.

Voice Dialing Tips:

4. Say “Yes” to confirm the name or “No” to hear the next

name, or use the keypad to select the correct name from

page 99.)

•

Wait for the beep before speaking.

Speak clearly at a normal volume, as if you were talking to someone

on the phone.

•

When saying a name, say the first name then the last name.

•

Press the Repeat soft key to say the name again.

Press the Settings soft key, then press the Exit soft key to exit

Voice Dial without dialing.

Dialing a Name

To dial a name, do the following:

1. In standby mode, press and hold

Call Functions

If the recognized name has multiple numbers stored for it

(that is, Home, Work, Mobile, and so on), Voice Dial

displays the possible choices and prompts you with

“Which number?”

If it recognizes the number, Voice Dial repeats and dials the

number. If Voice Dial is not sure it has recognized the

number, it displays a choice list of up to three numbers and

prompts you with “Did you say?” followed by the first

number on the list.

5. Say one of the following number types:

4. Say “Yes” to confirm the number or “No” to hear the next

one, or use the keypad to select the correct number from

the list. (For more information, refer to “Choice Lists” on

page 99.)

•

“

Home

Work

Mobile

”

Voice Dial dials the specified number.

Dialing a Number

•

To say the name again, press the Repeat soft key.

To exit Voice Dial without dialing, press

To dial a number using Voice Dial, do the following:

1. In standby mode, press and hold

Pause Dialing From a Contacts Entry

•

If you voice dial a contact that contains (two-second) T pause(s) simply

wait for the pauses to pass and the dialing to complete.

“Say a Command” appears in the display and is

pronounced through the speaker.

•

If you voice dial a contact that contains (hard) P pause(s), wait for the

appropriate prompt(s) from the number you are calling (credit card

number, bank account number, and so on) and enter the appropriate

response(s).

2. Say “Call”.

VoiceSignal prompts you to “Say the name or #”.

3. Speak clearly and say the telephone number of the person

you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."

Answering a Call

Your phone notifies you of a call in the following ways:

Tip: You can set your phone to automatically answer calls or to answer calls

when you press any key but the key or automatically. (For more

information, refer to “Call Settings” on page 117.)

•

A ring tone sounds and/or your phone vibrates (Your phone provides

seven ring volume settings including: Ringer Off Vibrate Low Low/

Medium Medium Medium/High High, or Vibrate/High, and/or

Note: If you set the Auto Answer option to any value other than Off, the Auto

Answer icon ( ) displays.

different ring types to distinguish callers.)

•

A phone number (unless blocked by the caller) and a name appear in

the display (If the caller’s number and name are stored in your

Contacts list).

Adjusting the Call Volume

During a call, press the Volume key (

the you hear the other party to the call at the desired loudness.

The Volume key is on the left side of phone.

) Up or Down until

•

If the caller can’t be identified, Call from unavailable#, Call from

restricted number, or no number appears in the display.

Your phone continues to notify you of the call until one of the following

events occurs:

The In-Use Options Menu

You can access numerous menus and features while in a call.

– You answer the call.

Note: If the call is disconnected while you are accessing the In-Use Option,

the In-Use Option disappears from the display and the phone

eventually returns to standby mode.

– You ignore the call.

– You mute the ringer.

– The calling party ends the call.

– The call is sent to voicemail.

1. While in a call, press the Options soft key.

Answering an Incoming Call

The following menu items appear in the display:

ᮣ

Slide your phone open, if closed, or press

. The ring

•

Message — The Messages menu appears in the display. (For

more information, refer to “Messaging” on page 52.)

Contacts — The Contacts Find screen appears in the display.

tone and/or vibration stop and the caller’s voice can be

heard in the earpiece.

•

• Recent Calls — The recent calls list appears in the display.

•

Send DTMF — Sends your phone number as DTMF tones.

Call Functions

•

Voice Privacy — Select Standard or Enhanced voice privacy.

Location — Lets you change your phone’s Location setting. (For

more information, refer to “Location” on page 117.)

Calls Log

The Calls log retains information about Outgoing, Incoming, and

Missed calls. You can also view times for your last call and the

time totals for all calls.

Do one of the following:

•

Select the desired sub-menu or feature.

Exit the menu by pressing

Review the Calls Log

1. In standby mode, press Menu ( ), then select Calls. The

following Calls logs and options appear in the display:

Tip: You can block/restore sound going to the other parties on this call by

pressing the Mute / Unmute soft key. This can reduce noise on

conference calls.

• Outgoing Calls

You can enable/disable Speakerphone mode by pressing and holding

. Speakerphone mode enables you to conduct a call hands-free and

to share a call with other people nearby. (For more information, refer to

“Responsible Listening” on page 139.)

• Incoming Calls

• Missed Calls

• All Calls

• Data Calls

• Call Timer

• Data Counter

Ignoring a Call

When you ignore an incoming call, the call is immediately

forwarded to your voice mail.

2. Select the Calls log that you wish to review or the function

you wish to access.

ᮣ

During an incoming call, press the Ignore soft key. The

caller is forwarded to your voice mail.

Note: In cases where there is a Contacts match for a Calls log entry, the

name associated with the number appears in the display instead of the

number.

Muting the Ringer

To mute the Incoming Call ringer, press the Volume key Up or

Down.

Note: Muting the ringer does not forward an incoming call to your voice mail.

Outgoing Calls

•

View Timer — Shows the number of calls and/or the total time

spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming

Calls, All Calls, Last Reset, and Lifetime Calls.

Your phone retains information about the last 90 outgoing calls

and stores them in the Outgoing calls log. You can review the

Outgoing calls log for the time and date of a call, as well as other

information.

4. Press the Msgs soft key to launch the Send Message

menu. The following options appear in the display:

•

Text Message — Lets you send a text message to the selected

number called.

Picture Message — Lets you send a picture message to the

selected number called.

Note: To quickly view your most recent calls, briefly press

in standby

mode. Up to 270 of your most recent outgoing, incoming, and missed

calls appear in the display.

•

1. At the Calls menu, select Outgoing Calls. A list of your

Note: For more information, refer to “Types of Messages” on page 52.

outgoing calls appears in the display.

5. Select the desired message type to compose a message.

2. Highlight a call, then press OPEN ( ) to view the Name

of the called party (if in the Contacts list), the number

dialed, the time and date the call was placed, and the

duration of the call (in minutes and seconds).

Incoming Calls

Your phone retains information about the last 90 Incoming calls

and stores them in the Incoming call log. You can review the

Incoming call log for the time and date of the call, as well as

other information.

3. Press the Options soft key. A pop-up menu containing the

following options appears in the display:

1. At the Calls menu, select Incoming Calls. A list of your

•

Save — Save the number to your Contacts.

Details — Calls to Contacts Only — Shows the entry for the called

Contact.

Incoming calls appears in the display.

•

Erase — Erase the selected call from your Outgoing call log.

Lock/Unlock — Protect the selected call from being erased.

Erase All — Erase all calls from your Outgoing call log.

Call Functions

2. Highlight a call, then press OPEN ( ) to view the Name

of the caller (if in the Contacts list), the originating number,

the time and date the call was received, and the duration

of the call (in minutes and seconds).

Missed Calls

Your phone retains information about the last 90 missed calls

(calls that were never picked up) and stores them in the Missed

call log. You can review the Missed call log for the time and date

of the call, as well as other information.

3. Press the Options soft key. A pop-up menu containing the

1. At the Calls menu, select Missed Calls. A list of your

following options appears in the display:

missed calls appears in the display.

•

Save — Save the number to your Contacts.

Details — Calls from Contacts Only — Shows the entry for the

calling Contact.

2. Highlight a call, then press OPEN ( ) to view the Name

of the caller (if in the Contacts list), the originating number,

and the time and date the call was received.

•

Erase — Erase the selected call from your Incoming calls log.

Lock/Unlock — Protect the selected call from being erased.

Erase All — Erase all calls from your Incoming calls log.

View Timer — Shows the number of calls and/or the total time

spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming

Calls, All Calls, Last Reset, and Lifetime Calls.

3. Press the Options soft key. A pop-up menu containing the

following options appears in the display:

•

Save — Save the number to your Contacts.

Details — Calls from Contacts Only — Shows the entry for the

calling Contact.

4. Press the Msgs soft key. The following options appear in

the display:

•

Erase — Erase the selected call from your Missed call log.

Lock/Unlock — Protect the selected call from being erased.

Erase All — Erase all calls from your Missed call log.

View Timer — Shows the number of calls and/or the total time

spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming

Calls, All Calls, Last Reset, and Lifetime Calls.

•

Text Message — Lets you send a text message to the selected

calling number.

•

Picture Message — Lets you send a picture message to the

selected calling number.

Note: For more information, refer to “Types of Messages” on page 52.

5. Select an option to perform its function.

4. Press the Msgs soft key. The following options appear in

•

Erase — Erase the selected call from your Calls log.

Lock/Unlock — Protect the selected call from being erased.

Erase All — Erase all calls from your Calls log.

View Timer — Shows the number of calls and/or the total time

spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming

Calls, All Calls, Last Reset, and Lifetime Calls

the display:

•

Text Message — Lets you send a text message to the selected

called number.

•

Picture Message — Lets you send a picture message to the

selected called number.

4. Press the Msgs soft key. The following options appear in

the display:

Note: For more information, refer to “Types of Messages” on page 52.

•

Text Message — Lets you send a text message to the selected

calling/called number.

5. Select an option to perform its function.

•

Picture Message — Lets you send a picture message to the

selected calling/called number.

All Calls

You can review all of the calls log entries (outgoing, incoming,

and missed calls) for the time and date of a call, as well as other

information.

Note: For more information, refer to “Types of Messages” on page 52.

5. Select an option to perform its function.

1. At the Calls menu, select All Calls. A list of all logged calls

Data Call

appears in the display.

Your phone retains information about the last 10 data calls and

stores them in the Data call log. You can review the Data call log

for the time and date of the call, as well as other information.

2. Highlight a call, then press OPEN ( ) to view further

information about the call.

3. Press the Options soft key. A pop-up menu containing the

1. At the Calls menu, select Data Call. A list of your data

following options appears in the display:

calls appears in the display.

•

Save — Save the number to your Contacts.

Details — Calls from Contacts Only — Shows the entry for the

calling/called Contact.

2. Highlight a data call, then press OPEN ( ) to view further

information about the call.

Call Functions

3. Press the Options soft key. A pop-up menu containing the

•

All Calls — View the duration of the total call, incoming, outgoing,

and data calls made on your phone since the last erasure.

Last Reset — View the time and date all timers were last reset.

Lifetime Calls — View the duration of all calls since your phone

was activated.

following options appears in the display:

•

Erase — Erase the selected call from your Data call log.

Lock Unlock — Blocks / permits erasure of this Call entry.

Erase All — Erase all calls from your Data call log.

Data Counter — Shows the amount of data Transmitted and

Received during this call, the Total amount of data exchanged since

the counters were last reset, and the total amount of data

exchanged since the phone was activated.

2. To reset a selected counter (except Last Reset and Lifetime

Calls), highlight the desired counter and press the Reset

soft key.

3. To reset all counters except Lifetime Calls, press the Reset

4. Select an option to perform its function.

All soft key.

Call Timer

4. To exit the Call Timer list, press

View the duration of your last call, total calls, and calls made

during the life cycle of you phone using the Call Timer feature.

Note: Although most call timers can be erased, the Lifetime call timer can

never be erased.

Note: Call Timer is not for billing purposes.

Data Counter

1. At the Calls menu, select Call Timer. The following timers

View the amount of Transmit data, Receive data, and Total data

transmitted or received since the last time you reset the data

counters, and the Lifetime amount of data transmitted or

received.

appear in the display:

•

Last Call — View the duration of your last call.

Outgoing Calls — View the duration of the total outgoing calls

made on your phone since the last erasure.

•

Incoming Calls — View the duration of the total incoming calls

received on your phone since the last erasure.

Roaming Calls — View the total calls duration on your phone

while roaming since the last erasure.

Note: Data Counter is not for billing purposes.

1. At the Calls menu, select Data Counter.

The following options appear in the display:

Roaming

•

Transmit — View the total amount of data transmitted by your

phone since the last reset.

Received — View the total amount of data received by your phone

since the last reset.

Total — View the total amount of data sent or received by your

phone since the last reset.

Last Reset — View the time and date all timers were last reset.

Lifetime Data Counter — View the total amount of data sent or

received by your phone since activation (Lifetime Data Counter

cannot be reset).

What is Roaming?

Roaming lets you use your TwoStep phone when you travel

outside of your Wireless Provider’s coverage area. The Roaming

icon (

) appears in the top line of the display when

Roaming is active, and extra charges may apply when making or

receiving calls.

•

Note: Some features may be unavailable while roaming. Roaming also

consumes additional power from the battery requiring more frequent

recharging. Contact your Wireless Provider for more information about

Roaming.

2. To reset a selected counter (except Last Reset and Lifetime

Data Counter), highlight the desired counter and press the

Reset soft key.

How Roaming Works

Roam Option lets you set roaming preferences if you move in and

out of your home network. The following roaming options are

available:

3. To reset all counters except Lifetime Data Counter, press

the Reset All soft key.

•

Home only — Your phone is available for normal operation only in the

designated coverage area.

4. To exit the Call Timer list, press

•

Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of

networks is used to acquire service. If no preferred networks are

found, any digital system is acquired.

Note: Although most data counters can be erased, the Lifetime Data Counter

can never be erased.

Note: For more information, refer to “System Select” on page 124.

Call Functions

Section 4: Menu Navigation

This section explains the menu navigation for your phone. It also

includes an outline of all the available menus associated with

your phone.

4. Press the Back soft key to return to the previous menu.

Return to the Previous Menu

Press the Right soft key Back to return to a previous menu.

•

Menu Navigation

Access the menus and sub menus in your phone using the

•

When Back does not appear in the display, press

to return to the

previous menu.

navigation key (

shortcut.

) and soft keys (

), or use a

Navigation Key Shortcuts

In standby mode, press a navigation key to launch the key’s

corresponding application.

1. In standby mode, press Menu ( ). The first of several

menus appears in the display.

My Images*

Note: More than one menu may appear in your display. This setting can be

modified in the Display/Menu Style menu.

Settings

easyedge

Tip: You can launch any of the Main Menus by using a voice command — In

standby mode, press and hold

until the phone prompts, “Say a

command.” Say “Go to” followed by a Main Menu name into the

microphone. For example, Say “Go to easyedge” to access the

easyedge^SMmenu.

Ringer Type

2. Use the navigation key to browse through the menus.

* My Images can be customized. Press Menu

Phone Settings Shortcut Key

(

), then select Settings

➔

3. To enter the menu or sub menu that appears in the display,

➔

press

to the first few letters of the menu or menu item name, as

shown.

Navigate Using a Shortcut

You can also access menus and sub menus using menu

numbers. After pressing Menu ( ), press the menu number to

go directly to the menu or sub menu of your choice. Before you

can navigate using a shortcut, you’ll need the menu or sub-menu

number that you wish to access.

2. Press the Down navigation key. The

Menu List screen appears showing

the matching menus and/or menu

items, as shown.

1. In standby mode, press Menu ( ).

3. Select the desired menu or menu

item. The associated screen appears

in the display.

2. Press the number of the menu, sub menu, and so on for

the feature that you wish to access.

Example: Press Menu ( ), then press

. This takes you to the

Tools menu (Menu 8), and then to the Alarm Clock (sub menu 3).

Navigate Using Quick Search

Use the Quick Search feature to find a

menu or menu item by pressing the

number keys that correspond to the first

few letters of menu or menu item name.

(For more information, refer to “Quick

Search” on page 125..)

Quick Search Accessing a Menu

To find and access a menu or menu item, do the following:

1. In standby mode, press the number keys that correspond

Menu Navigation

Section 5: Entering Text

This section outlines how use your phone’s keypad and text entry

modes to enter letters, numbers, and symbols and punctuation.

This section also describes how to use the T9 predictive text

entry system to reduce the number of key strokes needed to

enter text.

•

Symbols — Using the phone keypad, enter a symbol into your

message by pressing the number above the symbol in the Symbols

pop-up window.

Changing the Text Entry Mode

The current text entry mode (T9 Word Abc ABC, 123, or Symbols)

is usually indicated as the label for the Left soft key. To change

the text entry mode while composing a text message:

Available Text Entry Modes

Text messages can be made up of letters, numbers, and

symbols. You can use the following text entry modes to simplify

text entry:

ᮣ

Repeatedly press and hold

to toggle between Abc,

123, and T9Word modes.

•

T9 Word — Press each phone key only once to enter each letter of a

Or, do the following:

word that you’re spelling. T9 WORD mode letter options are:

–

T9 Word — Enter initial capital letters

T9 WORD — Enter all upper case letters

T9 word — Enter all lower case letters

1. Press the Left soft key.

2. Highlight one of the following text entry modes:

• T9Word

• Abc

•

Abc — Enter letters by repeatedly pressing each phone key until the

desired character (as shown on the key) appears in the display. ABC

mode letter options are:

• ABC

–

Abc — Enter initial capital letters

ABC — Enter all upper case letters

abc — Enter all lower case letters

• 123

• Symbols

3. Press

•

123 — Enter numbers by pressing the corresponding keys on the

phone keypad.

Changing Capitalization

As you press each key, the

displayed letters change, and

a list of available alternative

words or letter sequences

appears in the lower half of the

screen.

You can toggle the T9 Word and Abc mode capitalization between

entering all capital letters (T9WORD

ABC), entering all lower-case

letters (T9word

abc), and entering initial capital letters (T9WORD

ABC).

ᮣ

To toggle text entry capitalization, repeatedly press

until the preferred capitalization shows as the Left soft key

When you complete the key

label.

sequence, T9 Word recognizes

Using T9 Mode

that the most commonly used

T9 Word recognizes commonly used words for a particular

sequence of key presses and inserts the word into your message.

T9 Word is much faster than the traditional method of text entry

(Abc) and requires only one key press per letter of the word that

you’re spelling.

word for the key sequence you just pressed is “Samsung.”

Selecting Alternative Words

If more than one word shares the

same key sequence, T9 Word

displays the most commonly used

word in the text you are entering.

1. While composing a text message, press the Left soft key,

then select T9Word

T9 Word lists any available,

alternative words or letter sequences

in the lower half of the text entry

screen.

2. For practice, enter the word “Samsung” by pressing each

of the following keys only once:

Entering Text

ᮣ

To replace the currently displayed text with an alternative,

Using Abc Mode

highlight the preferred alternative and press

1. While composing a text message or memo, press the Left

soft key, then select Abc or ABC

Note: To enter a space, press the

key. To enter a period, press the

key. (For other symbols, see “Entering Symbols” on page 38.)

2. Enter characters while in Abc mode by pressing a key

repeatedly until the desired character appears in the

display.

Adding Words to T9 Word

The T9 Word dictionary may not

contain an obscure word, such as the

latest technical jargon or slang. If you

find you cannot enter a particular

word in T9 Word mode, you can add

the word to the T9 Word dictionary.

Example: Press

once for “G” and twice for “H”.

3. Pause briefly and the displayed character is accepted and

inserted into your message or memo.

4. To enter a space, press

. To enter a period, press

1. While composing message

text or a text memo, press the

Note: To enter a space, press the

key. To enter a period, press the

key. (For other symbols, see “Entering Symbols” on page 38.)

Left soft key, then select Add T9 Word. The Add T9 Word

screen appears in the display.

Entering Numbers

Enter numbers into a text message while in 123 mode.

Note: The Add T9 Word screen is locked into Abc text entry mode.

1. While composing a text message or memo, press the Left

soft key, then select 123

2. Enter your new word using Abc text entry key sequences.

(For more information, see “Using Abc Mode”.)

2. Enter numbers while in 123 mode by pressing the key

labeled with the corresponding number that you wish to

insert into your message or memo.

3. Press

. “T9 Word is Added” appears in the display and

you are returned to the message/memo text entry screen.

Entering Symbols

In Symbols mode, you can use your phone’s keypad to enter

symbols (such as “@” or “%”) or punctuation (such as “?” or “!”)

into a text message.

1. While composing a text message memo, press the Left

soft key, then select Symbols. The first of three symbol

screens appears in the display.

2. Use the Prev and Next soft keys to page through the other

symbols, if desired.

3. Press the key that corresponds with the symbol that you

wish to enter.

Example: Press

for an exclamation point (!).

4. Repeat these steps to insert additional symbols into your

message or memo.

Entering Text

Section 6: Understanding Your Contacts

This section details how you can manage your daily contacts by

storing their names and numbers in your Contacts list. You can

have your Contacts entries sorted by name.

Tip: You can also access the Find option from standby mode, by pressing the

Contacts soft key.

• Add New Contact — Add a number or Email address to your

Contacts.

Contacts

Up to 500 entries can be stored in Contacts. Each entry can have

up to five associated phone numbers and one Email address.

Each phone number can be up to 32 digits in length, including 2-

Sec or Wait pauses (see “Manual Pause Calling” on page 21 for

more information), and associated names can be up to 32

characters in length. You can assign the Speed Dial numbers of

your choice for each entry. You can also mark your Contacts list

as Restricted to prevent unauthorized viewing. (For more

information, refer to “Restriction” on page 123.)

• Speed Dial — Assign a Contacts entry to a Speed Dial number.

(For more information, refer to “Speed Dial” on page 46.)

• Group — Review, send messages to, add Contacts to, or rename

four out of your five groups. (For more information, refer to

“Contacts Groups” on page 48..)

• Memory Info — Display used and available memory for Contacts

entries.

2. Select the option of your choice.

Note: You can also press the keypad number key that corresponds to the

menu option number.

Tip: Speed Dial One-Touch Dialing Two-Touch Dialing, and Three-Touch

Dialing allow you to call numbers stored in Contacts faster.

Finding a Contacts Entry

Open Contacts

Shortcut Key Method

1. In standby mode, press Menu ( ), then select Contacts

The following options appear in the display:

• Find — Find a Contacts entry by name.

If you’ve stored a name entry in Contacts, Find allows you to find

it quickly by entering the first few letters of a Contact’s name.

1. In standby mode, press the Contacts soft key.

–

Send Pic Msg — Create and send a Picture message to the selected

Contact.

The Find screen appears in the display with the Go To field

highlighted, followed by the first few names in your

Contacts list.

–

Call — Dial the number associated with the name.

Send Name Card Via Bluetooth — Send selected Contacts to

another Bluetooth device.

Tip: You can also access the Find screen from standby mode by pressing

(

), then selecting Contacts

➔

Find.

Select the desired option to access its sub-menu appears in the display.

Voice Method

2. Enter the first few characters of a name as entered in

Contacts. For example, if you saved the name as “Amy

Smith”, begin the search by pressing (for “A”).

Use the VoiceSignal Lookup command to view contact

information for any named contact stored in your Contacts list by

saying the name.

As you enter letters, the names of the closest matches

appear in the display.

Note: The Lookup command shows the requested Contact information in the

display but does not dial a phone number for the contact.

3. When the desired entry is listed in the display, use the Up/

To look up information for a specific contact:

Down navigation keys to highlight the entry.

1. In standby mode, press and hold

to launch

•

Press

Press the Edit soft key to add or change information for this entry.

Press VIEW ) to show information about the entry.

Press the Options soft key. The following options appear in the

display:

to dial the number associated with the name.

VoiceSignal.

“Say a Command” appears in the display and is

(

pronounced through the speaker.

2. Say “Lookup”.

–

New Contact — Add a new entry to Contacts.

VoiceSignal prompts you to “Say the name.

”

Erase — Erase the name and associated information.

Send Txt Msg — Create and send a text message to the selected

3. Speak clearly and say the full name of the person you want

Contact.

to call, exactly as it is entered in your Contacts list.

Understanding Your Contacts

–

Send Name Card Via Bluetooth — Send the select Contact’s

information to another Bluetooth device.

•

If VoiceSignal recognizes the name you said, the Contact entry

information for that name appears in the display.

Select the desired option.

If VoiceSignal does not recognize the name you said, a choice list of

up to three names appears in the display, and VoiceSignal prompts

you with “Did you say?” followed by the first name on the list.

Quick Search Method

For information on enabling Quick Search, see “Quick Search” on

page 125.

4. Say “Yes” to confirm the name or “No” to hear the next

name, or use the keypad to select the correct name from

the list. (For more information, refer to “Choice Lists” on

page 66.)

1. In standby mode and with Quick Search enabled, press the

first few numeric keys that correspond to the letters of the

Contact’s name.

•

To say the name again, press Repeat

Example: To search for “Sally” you would enter 725

To exit VoiceSignal without dialing, press Settings and press Exit

5. The contact information for the name you selected appears

2. Press the Up navigation key. A list of Contact names that

begin with letters corresponding to the number keys you

pressed appears in the display.

in the display.

•

To dial the default number associated with the name, press

To remove this entry from your Contacts list, press the Erase soft

key.

3. Highlight the searched for Contact.

•

To call the Contact, press

To view the Contact, press

•

To add or change information for this entry, press EDIT

(

To access the following options, press the Options soft key.

Adding a New Contacts Entry

You can use either of two methods to add an entirely new entry to

Contacts.

–

Send Txt Msg — Create and send a text message to the selected

Contact.

Send Pic Msg — Create and send a picture message to the selected

Contact.

Call — Dial the number associated with the Contact name.

Dial Method

Menu Method

1. Using the keypad, enter the number you wish to add to

1. In standby mode, press Menu

(

), then select Contacts

your Contacts.

➔

Add New Contact.

2. Press the Save soft key. The following options appear in

the display:

The Add New Entry screen appears in the display with the

Name field highlighted.

• Create New — Lets you create a new Contacts entry.

2. Enter the name of the new entry using the keypad. (For

• Update Existing — Lets you add the number you entered to an

existing Contacts entry.

more information, refer to “Entering Text” on page 35.)

3. Highlight one of the following fields:

3. Select Create New

• Mobile

• Home

• Work

• Pager

• Email

• Group

• Ringtone

• Fax

The Create New screen appears in the display showing the

following icons:

Mobile

Pager

Home

Fax

Work

4. Select the number type that matches your new entry.

4. Enter a phone number or Email address in the highlighted

5. Use the keypad to enter a name to associate with the

field.

Contacts entry.

5. Repeat steps 3 and 4 as needed.

6. Press SAVE

(

) to save the entry.

6. Press

to save the new entry.

Understanding Your Contacts

–

Wait — A hard pause (waits for input from you).

Editing a Contacts Entry

2-Sec Pause — A 2-second pause after which dialing resumes. (For

more information, refer to “Add Pauses to Contacts Numbers”

on page 43.)

Editing Contacts Name and Numbers

1. Find the Contacts entry you wish to change. (For more

information, refer to “Finding a Contacts Entry” on

information, refer to “Finding a Contacts Entry” on

Select the desired option.

5. When you’re finished changing the Contacts entry:

•

To save your changes, press

2. Use the Navigation key to highlight the entry and press

To discard your changes, press . You are prompted to confirm

exiting without saving your changes. Press the Yes soft key to

discard your changes.

VIEW

(

). The View Contact screen appears in the display

showing the highlighted entry’s information.

Add Pauses to Contacts Numbers

3. Use the Navigation key to review the information for the

Calls to automated systems such as banking services often

require a password or account number. Instead of manually

entering these numbers, you can store them in a Contacts entry

with the phone number and with special characters called

pauses, up to a maximum of 32 digits.

entry that you wish to change, then press EDIT

(

). The

Edit Contact screen appears in the display.

4. Use the Navigation key to highlight the particular

information you want to add or change.

•

Wait — Stops the calling sequence until the phone receives further

input.

•

Press

Press and hold

highlighted field.

Press the Options soft key.

The following options pop-up in the display:

to backspace and delete numbers or letters.

to clear all numbers or letters in the

•

2-Sec Pause — Stops the calling sequence for two seconds, then

sends the remaining digits.

•

–

Set Speed Dial Remove Speed Dial — Assign/remove a speed dial

number. (For more information, refer to “Speed Dial” on page 46..)

Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.

For example, two consecutive 2-Sec Pauses cause a total pause time

of four seconds. Keep in mind that pauses count as digits towards the

32-digit maximum.

–

Set as default — Set the number the phone will dial when Contacts

dialing or speed dialing.

To add pauses to a Contacts entry number, do the following:

1. Find the Contacts entry associated with the number you

want to include one or more pauses. (For more

information, refer to “Finding a Contacts Entry” on

2. If you stored the number using Wait(s), find and dial the

number from Contacts and wait for the appropriate prompt

from the dialed number.

3. Press

to resume dialing the number.

Edit an Existing Email Address

1. Find the Contacts entry you want to edit. (For more

refer to “Editing a Contacts Entry” on page 43.)

2. Select and edit the desired number. (For more information,

3. Press Options. The following pause options appear in the

display:

2. Highlight the desired Contacts entry, then press the Edit

• 2-Sec Pause — A 2-second pause after which dialing resumes.

• Wait — A hard pause (waits for input from you).

4. Select the pause option of your choice to add it to the

soft key.

The Edit Contact screen appears in the display.

3. Highlight the Email field.

number sequence.

4. Use the keypad to edit the Email address. (For more

5. When you’re finished entering information, press

information, refer to “Entering Text” on page 35.)

store the number to Contacts.

5. Press

to save your changes.

Pause Dial from Contacts

1. If you stored the number using 2-second pause(s), simply

find the Contacts entry, highlight the number, and press

. (For more information, refer to “Finding a Contacts

Entry” on page 39.)

Assigning a Ringtone to a Contacts Entry

When you assign a ringtone to a Contacts entry, the phone plays

the ringtone that you assigned to the entry when you receive a

call from that Contact instead of the ringtone currently assigned

to Voice Calls.

Understanding Your Contacts

1. Find the Contacts entry you want to edit. (For more

information, refer to “Finding a Contacts Entry” on

Saving a Number After a Call

Once you finish a call, you can store the caller’s number to your

Contacts list.

2. Highlight the desired Contact, then press the Edit soft key.

The Edit Contact screen appears in the display.

Note: If the call was incoming and Caller ID information was unavailable,

then the Save option is also unavailable.

3. Highlight the Ringtone field, then press the Set soft key.

1. Press

to end your call. The call time, length of call,

phone number, and name of the party (if available) appear

in the display.

The Contact Tone menu appears in the display showing the

following options:

• My Ringtones

2. Press the Save soft key. The Save menu appears in the

• My Sounds

display showing the following options:

4. Select the desired option. The My Ringtones or the My

• Create New — Lets you create a new Contacts entry.

• Update Existing — Lets you add the number you entered to an

existing Contacts entry.

Sounds file list appears in the display.

5. Select the ringtone or sound that you wish to assign to the

3. Follow the instructions in the upcoming sections

depending on whether the number is a new entry or you

wish to add it to an existing entry.

Contacts entry.

The Edit Contact screen re-appears in the display with the

name of the selected file in the Ringtone field.

Create a New Entry

1. At the Save menu, select Create New

6. Press

to save the ringer assignment to the selected

Contacts entry.

The Create New screen appears in the display showing the

3. Select the desired Contacts entry. The following number

following number type options:

type options appear in the display:

Mobile

Pager

Home

Fax

Work

Mobile

Pager

Home

Fax

Work

2. Select the number type that matches your new entry.

Number types that are already assigned a number show

the number instead of the number type label.

3. Enter a name for the new entry. (For more information,

Contacts Entry” on page 39.)

4. Select the desired unassigned number type. The Contacts

entry information appears in the display with the new

number posted in the appropriate number type field.

4. Press

. The new entry is saved to your Contacts list.

Add to an Existing Entry

5. Press

again to save your changes to the existing entry.

1. At the Save menu, select Update Existing. The Update

Existing screen appears in the display showing your

Contacts list with the Go To field and the first Contacts

entry highlighted.

Speed Dial

A Contacts entry’s Speed Dial number corresponds to the number

keys you press to speed dial one of that entry’s numbers.

2. Find the Contacts entry to which you want to add the new

number. (For more information, refer to “Finding a

Example: To speed dial the Contacts entry assigned to Speed Dial 5, press

and hold

, (1-touch dialing).

To speed dial the Contacts entry assigned to Speed Dial 35, press

then press and hold , (2-touch dialing).

To speed dial the Contacts entry assigned to Speed Dial 235, press

, press , then press and hold , (3-touch dialing).

Understanding Your Contacts

You can assign one or more Speed Dial numbers to a Contacts

entry during new entry creation or by editing an existing entry.

4. Select an Unassigned Speed Dial number or enter an

Unassigned Speed Dial number in the Go To field using the

keypad.

Assignment During Entry Creation

To assign a Speed Call number to a new Contacts entry number,

do the following:

Important!: Do not enter Speed Call numbers 1, 411, 611, or 911. These

numbers are already assigned to Voicemail (001), to Information

(411), to Customer Care (611), and to emergency use (911).

1. Follow either of the New Contacts entry procedures (see

“Adding a New Contacts Entry” on page 41.) until you

enter a name for the entry.

5. Press SET ( ). You are prompted to confirm your Speed

Dial number assignment.

2. After entering the Contacts entry name, do not press

6. Press the Yes soft key to save your Speed Dial assignment

Instead, highlight a number field.

and return to the Add New Entry screen.

3. Press the Options soft key. The following options appear in

Note: Press the No soft key to discard the assignment and return to the

the display:

Speed Dial screen.

• Set Speed Dial — Assign a speed dial number.

• Set as default — Set the number the phone will dial when

Contacts dialing, speed dialing, or voice dialing.

• Wait — A hard pause (waits for input from you).

• 2-Sec Pause — A 2-second pause after which dialing resumes.

(For more information, refer to “Add Pauses to Contacts

Numbers” on page 43.)

7. Press

to save your changes.

Assignment to an Existing Entry

1. Find the Contacts entry you want to edit. (For more

information, refer to “Finding a Contacts Entry” on

information, refer to “Finding a Contacts Entry” on

Select Set Speed Dial. The Speed Dial screen appears in the

2. Highlight the desired entry.

display.

3. Press Edit. The Edit Contact screen appears in the display.

4. Highlight the number field you wish to assign a Speed Dial

6. Select Remove Speed Dial. “Remove speed dial?” pops up

number.

in the display to confirm your desire to remove the entry.

5. Do steps 3 through 7 of “Assignment During Entry

7. Press the Yes soft key to remove the Speed Dial

assignment. “Speed Dial Removed” pops up in the display,

and you are returned to the Edit Contact screen.

Creation” on page 47.

Changing a Speed Dial Location

1. Find the Contacts entry you want to edit. (For more

page 39..)

8. Do steps 4 through 7 of “Assignment During Entry

Creation” on page 47.

Contacts Groups

2. Highlight the desired entry.

Contact Groups let you easily send messages to multiple,

selected Contacts. You can also use Groups to find Contact

entries and to add/remove Contacts names in a Group or to

create or rename a Group.

3. Press Edit. The Edit Contact screen appears in the display.

4. Highlight the number field marked by the Speed Dial icon

(

Add Contacts Entry to a Group

5. Press the Options soft key. The following options appear in

Using Add New/Edit Contact Option

the display:

To add a Contact to a Group using either the Add New Contact

option or the Edit Contact option, do the following:

• Remove speed dial — Unassign the current speed dial number.

• Set as default — Set the number the phone will dial when

Contacts dialing, speed dialing, or voice dialing.

• Wait — A hard pause (waits for input from you).

• 2-Sec Pause — A 2-second pause after which dialing resumes.

(For more information, refer to “Add Pauses to Contacts

Numbers” on page 43..)

1. Create a Contacts entry (see “Adding a New Contacts

Entry” on page 41) or find a Contacts entry (see “Finding a

Contacts Entry” on page 39) that you want to add to a

Group.

2. Highlight the Group field, then press the Set soft key.

Understanding Your Contacts

The Select Group screen appears in the display showing

• Colleague

• Family

• Friends

Groups similar to the following:

• No Group

• Business

• Colleague

2. Highlight a Group, then press the Options soft key. The

following options popup in the display:

• Family

• Friends

• Send Txt Msg — Send a text message to the selected Group.

• Send Pic Msg — Send a picture message to the selected Group.

• Rename — Change the name of the selected Group.

• Erase — Delete the selected Group, and send the member

Contacts back to No Group.

3. Select the Group to which you want to assign the selected

Contact.

You are returned to the Add New Entry

and the selected Group name populates the Group field.

4. Press to save your changes.

/Edit Contact screen

• Add — Add one or more Contacts to the selected Group.

3. Select Add. The Add Contacts screen appears in the display

showing a list of Contacts entries.

4. Do one of the following:

Using Group Add Option

•

Use the Navigation key to highlight an entry you want to add to the

The Add option lets you add one or more existing Contacts to a

Group.

group, then press MARK

check box.

(

). A check mark appears in the entry’s

1. In standby mode, press Menu

Group

(

), then select Contacts

Repeat as needed to check all the desired Contacts.

Press the Mark All soft key.

➔

•

The Group List screen appears in the display showing

Note: To unmark a marked Contact, highlight the Contact and press MARK to

clear the check mark.

Groups similar to the following:

• No Group

• Business

5. When you have marked the Contacts you want to add to

the group, press Done. “Contact added to group” appears in

the display, followed by the selected Group list including

the added Contacts.

Rename a Group

The Rename option lets you change the name any of the Groups,

except No Group.

1. In standby mode, press Menu

Group. The Group List screen appears in the display.

2. Highlight the Group name other than No Group that you

wish to change, then press Options Rename

(

), then select Contacts

➔

Remove Contacts Entry from a Group

1. In standby mode, press Menu

Group. The Group List screen appears in the display.

2. Highlight the Group (other than No Group) from which you

want to remove a Contact, then press VIEW ).

(

), then select Contacts

➔

The Rename Group screen appears in the display.

(

3. Enter changes to the group name using the keypad. (For

more information, refer to “Entering Text” on page 35.)

A list of the Contacts assigned to the selected Group

appears in the display.

4. When you have completed your changes to the Group

name, press SAVE

Group Renamed” appears in the display followed by the

Group List screen showing your renamed Group.

(

3. Highlight the Contact you wish to remove.

“

4. Press the Remove soft key. You are prompted to confirm

the removal of the selected Contact.

Add a New Group

5. To remove the selected Contact from this Group and return

it to No Group, press the Yes soft key.

The New option lets you add Groups.

1. In standby mode, press Menu

Group. The Group List screen appears in the display.

(

), then select Contacts

To keep the selected Contact in this Group, press the No

➔

soft key.

2. Press the New soft key. The New Group screen appears in

the display.

Understanding Your Contacts

3. Enter a new group name using the keypad. (For more

2. Highlight the desired entry, press the Options soft key, then

select Erase. The phone prompts you to confirm the

erasure.

information, refer to “Entering Text” on page 35.)

4. When you have completed entering the new Group name,

press SAVE

(

). “Group Saved” appears in the display

3. To confirm erasure of the selected Contact, press the Yes

followed by the Group List screen showing your new

soft key. To retain the Contact, press the No soft key.

Group.

Memory Info

Erase a Group

The Memory Info menu option lets you view the amount of

memory you have used to store Contacts entries, as well as the

memory remaining to store more Contacts entries.

The Erase option lets you delete a Group, thus freeing you to

reassign the Contacts formerly in the Group.

ᮣ

In standby mode, press Menu

Memory Info

(

), then select Contacts

1. In standby mode, press Menu

Group. The Group List screen appears in the display.

2. Highlight the Group that you wish to delete, press the

Options soft key, then select Erase

(

), then select Contacts

➔

The Memory Info Contacts screen appears in the display

showing the Total amount of memory in your phone, the

amount of memory Used to store Contacts entries, and the

remaining (Free) for Contacts entries.

You are prompted to confirm the Group erasure.

3. To confirm erasure of the Group, press the Yes soft key. To

retain the Group, press the No soft key.

Deleting a Contacts Entry

1. Find the Contacts entry you want to delete. (For more

information, refer to “Finding a Contacts Entry” on

(For more information, refer to

Section 7: Messaging

This section explains how to send or receive different types of

messages. This section also describes the features and

functionality associated with messaging.

Tip: To launch the Create Txt Msg screen using a voice command — In

standby mode, press and hold

until the phone prompts, “Say a

command.” Say “Send Text” into the microphone. You are then prompted

to say a Contact name or a number for the first recipient of the

message.

Types of Messages

Your phone is able to send and receive Text and Picture

messages to compatible phones and devices. Text messages can

be up to 160 characters in length.

2. Enter the phone number or

Email address of the recipient,

then press

. The Text: field

Note: Available memory is shared between all messages. You can store up to

100 messages. However, the exact number is dependent upon

message length.

appears in the display.

3. Enter the text content of your

message using the keypad.

“Entering Text” on page 35.)

Create and Send Text

Messages

1. In standby mode, press the

Msgs soft key, then select

4. Press the Options soft key to complete the message text

and set message send options. The following options

appear in the display:

Send Message

➔

Text

Message. The Create Txt Msg

screen appears in the display

showing the To: list.

• Edit Send To — Edit the recipient’s number or email address.

• Add Quick Text — Insert pre-composed text in your message.

• Save As Draft — Save the message to your Draft folder.

Messaging

• Priority Level — Choose Urgent or Normal

Reply With Copy, Save Quick Text, Lock, Add To Contacts, Message

Info, or Extract.

• Validity Period — Enter the Date when this message will cease to

be valid, then use the Left and Right navigation keys to choose the

Time.

•

View Later — Saves the message to your Inbox, where you can view

it later, then returns your phone to standby mode.

• Deferred Delivery — Select the Date and Time you want this

message to be delivered.

Select your choice.

Receive Messages While in a Call

• Enh. Delivery Ack — Choose On or Off — Requests confirmation

when your message is received.

When you receive a message while in a call, New Message

appears in the display along with the closed envelope icon

• Add To Contacts — Save the recipient’s number or Email address

as a Contacts list entry.

(

). The date and time of the message also appear in the

display along with the following options:

5. Once you’re finished entering your message, press SEND

•

View Now — Opens the message, where you have the option to

Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,

Message Info, or Extract.

(

Receive Text Messages

When you receive a message in

standby mode, the ringer sounds

(unless turned off) and New Message

appears in the display along with the

View Later — Saves the message to your Inbox, where you can view

it later, and returns your phone to call mode.

Select the preferred option.

View a Text Message Now

closed envelope icon (

). The

date and time of the message also

appear in the display along with the

following options:

1. After you select the View Now option, the new text

message appears in the display.

2. While viewing your message press the Options soft key.

The following options appear in the display:

•

View Now — Opens the message,

where you have the option to Forward,

• Forward — Send a copy of this message to another recipient.

• Reply With Copy — Compose and send a reply message to the

originator of the received message and include a copy of the

original message.

Send Picture Messages in Camera Mode

Picture messages can be sent to recipients with compatible

phones or devices. You can even accompany a Picture message

with a voice memo or preloaded sound.

• Save Quick Text — Save the text in this message as a new Quick

Text.

• Lock

Unlock — Block/permit erasure of the highlighted

Tip: You can send a Picture message to up to ten recipients. Enter each

recipient’s address or phone number in a separate Send to field of the

Picture message composer.

message.

• Add To Contacts — Save the sender’s number to your Contacts.

• Message Info — Shows message delivery status, addressee, size,

1. In standby mode, press and hold the Camera key (

and so on.

The camera viewfinder screen appears in the display.

• Extract — Lets you call the originator of the highlighted message.

2. Using the display as a viewfinder, when the image that you

3. Select an option to perform its function.

wish to send appears in the display, press TAKE

(

) to

Note: For more information on received message options, see “Inbox” on

take a picture.

page 59.

Note: For more information about using the camera feature in your phone,

see “Camera” on page 74.

View a Text Message Later

1. In standby mode, press the Msgs soft key, then select

Inbox. The Inbox screen appears in the display.

2. Select the new message. The new text message appears

in the display.

Messaging

3. Press SEND

(

) to save the

6. Press the Down navigation key until the Text: field is

highlighted, then enter the message text using the keypad.

(For more information, refer to “Entering Text” on

refer to “Entering Text” on

picture and begin the picture

message delivery process. The

Create Pic Msg screen then

appears in the display with the

Send To: list highlighted.

7. Your new picture appears in the PIC: field.

8. If you wish to insert a sound into your Picture message,

highlight the Sound: field and do the following; otherwise,

proceed to step 10.

4. Enter the phone number or

Email address of the recipient

of the Picture message, then

•

Press the Sounds soft key. The My Sounds screen appears in the

display showing the following options:

press

–

Record New — Record a new memo to insert into the message.

Tip: Press the Add soft key to display a pop-up menu containing: Contacts

Groups, and Recent Calls, and Online Album. These options allow you to

Note: You can record and insert a voice memo of up to 60 seconds in length,

if you record first before attaching a picture. If a picture is attached

before recording, the size of the voice memo is limited to the amount

of remaining memory.

find and add recipients to the Send To: list.

5. The Subject: field appears in

the display. Enter a subject for

the Picture message using the

keypad. (For more information,

refer to “Entering Text” on

–

Audio files list — Select from the list of previously recorded voice

memos and preloaded audio files on your phone.

Select an option, a sound file, and insert the sound into your message.

To exit the pop-up menu without inserting a sound, press

9. Press the Options soft key to complete the message text

and set message send options.

The following options appear in the display:

Send Picture Messages in Standby Mode

•

Preview — View the picture as the recipient will see it.

Add Quick Text — Add pre-composed text to your message.

Save As Draft — Save the message to your Draft folder.

Send Picture messages to recipients with a compatible phone or

other device, and accompany the Picture message with a voice

memo, ring tone, or downloaded melody.

Priority Level — Choose Urgent Normal, or Low.

Tip: You can send a Picture message to up to ten recipients. Enter each

recipient’s address or phone number in a separate Send To field of the

Picture message composer.

Validity Period — Enter the Date when this message will cease to

be valid, then use the Left and Right navigation keys to choose the

Time

1. In standby mode, press the

• Deferred Deliv. — Lets you specify a Date and Time when the

message will be delivered.

Msgs soft key, then select

Send Message

Message

➔

Picture

•

Delivery Ack — Choose On or Off — Requests confirmation when

your message is received.

•

Remove Pic — Remove the picture from your message.

The Create Pic Msg screen

then appears in the display

showing the To: list.

Remove Sound — Remove the sound file from your message.

Add To Contacts — Save the recipient’s number or Email address

as a Contacts list entry.

Select the desired option.

10. Press SEND

(

) to send the message. “Pic Msg Sending”

Tip: To launch the Create Pic Msg screen using a voice command — In

standby mode, press and hold

until the phone prompts, “Say a

appears in the display and a progress bar indicates the

send status.

command.” Say “Send Picture” into the microphone. You are then

prompted to say a Contact name or a number for the first recipient of the

message.

2. Enter the phone number or Email address of the recipient

using the keypad, then press

Messaging

•

If you want to include a new picture, press the Camera soft key.

Tip: Press the Add soft key to display a pop-up menu containing: Contacts

Groups Recent Calls, and Online Album. These options allow you to find

Note: For more information about using the camera feature in your phone,

and add recipients to the Send To: list.

see “Camera” on page 74.

3. The Subject: field appears in

the display. Enter a subject for

the Picture message using the

keypad. (For more information,

•

Press

to add the highlighted picture to your message.

You are returned to the Create Pic Msg screen with the

selected picture in the Pic: field.

7. If you wish to insert a sound into your Picture message,

use the Down navigation key to highlight the Sound: field

and do the following; otherwise, proceed to step 8.

4. Press the Down navigation key

until the Text: field is

•

Press the Sounds soft key. The My Sounds screen appears in the

display showing the following options:

highlighted, then enter the

–

Record New — Record a new memo to insert into the message.

message text using the keypad. (For more information,

Note: You can record and insert a voice memo of up to 60 seconds in length,

if you record first before attaching a picture. If a picture is attached

before recording, the size of the voice memo is limited to the amount

of remaining memory.

5. Press the Down navigation key until the Pic: field is

highlighted, then press the Picture soft key. A photo gallery

–

Audio files list — Select from the list of previously recorded voice

memos and preloaded audio files on your phone.

of thumbnail images appears in the display.

6. Highlight a picture to be added to your message, then do

Select an option, a sound file, and insert the sound into your message.

To exit the pop-up menu without inserting a sound, press

the following:

•

If you want, press the View soft key to expand the highlighted

picture to full-screen size.

8. Press the Options soft key to complete the message text

and set message send options. The following options

appear in the display:

Receive Picture Messages

When you receive a Picture Message

in standby mode, the ringer sounds

(unless turned off) and New Message

appears in the display along with the

closed envelope icon ( ).

• Preview — View the picture as the recipient will see it.

• Add Quick Text — Add pre-composed text to your message.

• Save As Draft — Save the message to your Draft folder.

The date and time of the message

also appear in the display along with

the following options:

•

Priority Level — Choose Urgent, Normal, or Low.

• Validity Period — Enter the Date when this message will cease to

be valid, then use the Left and Right navigation keys to choose the

•

View Now — Retrieves and opens the

Time

message, where you have the option to

• Deferred Deliv. — Lets you specify a Date and Time when the

message will be delivered.

Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.

View Later — Saves the message to your inbox, where you can view

it later, then returns your phone to standby mode.

•

• Delivery Ack — Choose On or Off — Requests confirmation

when your message is received.

Select the desired option.

• Remove Pic — Remove the picture from your message.

View a Picture Message Later

1. In standby mode, Msgs soft key, then select Inbox. The

Inbox appears in the display.

• Remove Sound — Remove the sound file from your message.

• Add To Contacts — Save the recipient’s number or Email address

as a Contacts list entry.

Select an option to invoke its function.

2. If the new picture message is not highlighted, select the

new message. “Connecting” appears in the display

followed by “Retrieving” and a progress bar indicating that

the message is downloading to your phone.

9. Press

to send the message. “Pic Msg Sending”

appears in the display and a progress bar indicates the

send status.

Messaging

3. Once a Picture message has been downloaded to your

phone, the new Picture message appears in the display. If

the message includes a sound file, the phone begins

playing it.

• Forward — Send a copy of this message to another recipient.

• Save Sound — Save the sound file included in this message to the

My Sounds folder.

• Save Pic — Save the picture included in this message to the My

Images folder.

• Save Quick Text — Save the text in this message as a new Quick

Text.

Note: For more information on viewing and managing received picture

messages, see “Inbox” on page 59.

• Lock Unlock — Block/permit erasure of the highlighted

View a Picture Message Now

message.

1. After you select the View Now option, “Connecting

”

• Add To Contacts — Save the sender’s number to your Contacts.

appears in the display followed by “Retrieving” and a

progress bar indicating that the message is downloading

to your phone.

• MessageInfo — Shows message delivery status, addressee, size,

and so on.

• Extract — Calls the sender of the received message.

4. Select an option to invoke its function.

2. After the Picture message has downloaded, an alert

sounds, and the new Picture message appears in the

display. If the message includes a sound file, the phone

begins playing it.

Note: For more information on received picture message options, see

“Inbox” on page 59.

Message Boxes

3. While viewing your message press the Options soft key.

Your phone stores messages in any one of five message boxes.

The subsections that follow describe each message box in detail.

The following options appear in the display:

Inbox

• Play Again — Play the sound file included in the picture message

again.

Received messages of all types (except Voicemail) are stored in

the Inbox.

• Reply — Compose and send a reply message to the originator of

the received message.

1. In standby mode, press the Msgs soft key, then select

• Message Info — Shows message delivery status, addressee, size,

and so on.

Inbox. A list of incoming messages appears in the display.

• Extract — Calls the sender of the received message.

Tip: While in a call, press Options, then select Message to open the Messages

4. Select an option to invoke its function.

menu.

Managing Inbox Messages

2. Select the message that you wish to view. The contents of

1. In standby mode, press the Msgs soft key, then select

Inbox. A list of incoming messages appears in the display.

the highlighted message appear in the display.

3. While viewing your message press the Options soft key.

2. Highlight a message in the list.

The following options appear in the display:

3. Press Erase to remove the highlighted message from the

• Play Again — Pic Msg — Play the sound file included in the

picture message again.

Inbox.

4. To access other options, press the Options soft key. The

• Forward — Send a copy of this message to another recipient.

following options appear in the display:

• Reply With Copy — Compose and send a reply message to the

originator of the received message and include a copy of the

original message.

• Reply — Compose and send a reply message to the originator of

the received message.

• Erase — Pic Msg — Delete the picture from this message.

• Reply With Copy — Compose and send a reply message to the

originator of the received message and include a copy of the

original message.

• Save Quick Text — Save the text in this message as a new Quick

Text.

• Save Pic — Pic Msg — Save the picture in this message into the

• Forward — Send a copy of this message to another recipient.

My Images folder.

• Lock Unlock — Block/permit erasure of the highlighted

message.

• Add To Contacts — Save the sender’s number to your Contacts.

• Erase Inbox — Delete all unlocked messages from the Inbox.

• Add To Contacts — Save the sender’s number to your Contacts.

Messaging

• MessageInfo — Shows message delivery status, addressee, size,

and so on.

• Lock Unlock — Block/permit erasure of the highlighted

message.

5. Select an option to perform its function.

• Add To Contacts — Save the recipient’s number to your Contacts.

• MessageInfo — Shows message delivery status, addressee, size,

and so on.

Outbox

Your phone stores messages in the Outbox, regardless of

whether the message was successfully transmitted. Verify if and

when a message or Email was successfully received by enabling

the Delivery Ack feature.

• Extract — Calls recipient of this message.

4. Select an option to perform its function.

Messages and Lock Mode

Review Messages in the Outbox

Your phone can still receive messages while in Lock Mode. The

time and date of the message appear in the display, but you

cannot access the message until you enter the lock code.

1. In standby mode, press the Msgs soft key, then select

Outbox. Your list of sent messages appear in the display.

Managing Outbox Messages

2. Highlight a message that you wish to review, then press

1. In standby mode, press the Msgs soft key, then select

Outbox. Your list of sent messages appear in the display.

OPEN

(

3. While viewing your message, press the Options soft key.

2. Highlight a message, then press Erase to remove the

The following options appear in the display:

highlighted message from the Outbox.

• Play Again — Pic Msg — Play the sound file included in the

picture message again.

3. Press the Options soft key. The following options appear in

the display:

• Forward — Send the highlighted message to another recipient.

• Erase — Pic Msg — Delete the picture from this message.

• Forward — Send the highlighted message to another recipient.

• Save Quick Text — Save the message text as Quick Text for

insertion into other messages.

• Resend — Re-send the highlighted message to the original

recipient.

• Lock

Unlock — Block/permit erasure of the highlighted

3. Compose your message using the keypad, then press the

Options soft key and select Save As Draft. A confirmation

message appears in the display and your message is

saved to the Drafts box.

message.

• Add To Contacts — Save the recipient’s number to your Contacts.

• Erase Outbox — Delete all unlocked messages from the Outbox.

• Message Info — Shows message delivery status, addressee, size,

and so on.

View and Edit Draft Messages

1. In standby mode, press the Msgs soft key, then select

Drafts. A list of any draft messages that you’ve saved

appears in the display.

4. Select an option to perform its function.

Draft Box

Messages in the Draft Box are those that have been composed

but never sent. You can return to the Draft Box at any time to

view, edit, or send a draft message.

2. Highlight a message that you wish to view or edit, then

press EDIT

(

). The Create Text Msg Create Pic Msg

Create a Draft Message

screen appears in the display showing the To: list.

1. In standby mode, press the Msgs soft key, then select Send

3. Enter or change the recipient’s number and/or Email

address and the message Text (Txt Msg) or Subject and

Text (Pic Msg) using the keypad. (For more information,

menu. (For more information, refer to “Review Messages in the Outbox”

Message

Text Msg

➔

Text Message

Picture Message. The Create

Create Pic Msg screen appears in the display

showing the To: list.

2. Enter the phone Number or Email address of a recipient,

4. Press the Options soft key to complete the message and

set message send options. The following options appear in

the display:

then press

• Edit Send To — Txt Msg — Change, add, or remove recipients

from this message.

Messaging

Managing Draft Messages

• Preview — Pic Msg — View your message as the recipient(s) will

see it.

1. In standby mode, press the Msgs soft key, then select

Drafts. A list of any draft messages that you’ve composed

appears in the display.

• Add Quick Text — Insert pre-composed text into your message

text.

• Save As Draft — Save the message to your Drafts box.

2. Highlight a message.

• Priority Level — Choose Urgent or Normal

• Validity Period — Enter the Date when this message will cease to

be valid, then use the Left and Right navigation keys to choose the

Time.

3. To remove the highlighted message from the Drafts box,

press the Erase soft key. You are prompted to confirm

erasure of the highlighted draft message.

• Deferred Delivery — Lets you specify a Date and Time when the

message will be delivered.

•

To erase this draft message, press the Yes soft key.

• Enh. Delivery Ack — Choose On or Off — Requests confirmation

when your message is received.

To keep this draft message in your Drafts box, press the No soft

key.

• Remove Pic — Pic Msg — Remove the picture file currently

4. For other options, press the Options soft key. The following

included in your message.

options appear in the display:

• Remove Sound — Pic Msg — Remove the sound file currently

included in your message.

• Send — Send the highlighted message to the original recipient, if

the recipient’s number and/or Email address is included with the

draft message.

• Add To Contacts — Save the recipient’s number or Email address

to your Contacts.

• Lock Unlock — Block/permit erasure of the highlighted

5. Select an option to perform its function.

message.

• Add To Contacts — Save the recipient’s number and/or Email

6. When you have completed composing your message,

address to your Contacts.

press SEND

(

• Save Quick Text — Save the message text as Quick Text for

insertion into other messages.

• Erase Drafts — Delete all unlocked draft messages.

2. Highlight a voice message.

3. Press or to call your voice mailbox and listen to

the message.

5. Select an option to perform its function.

Voicemail

Messages in your voice mailbox are logged in the Voicemail box

of the Messages menu. Open the Voicemail box to view the

Callback # (if available), Urgency, and other details of the

Voicemail message.

Note: You can also press and hold

to dial your voice mailbox.

Erase Messages

Using Erase Messages, you can erase all of the messages in

each of your boxes from one convenient location.

Listen to Voicemail Now

Once you’ve received a new voicemail message, you have the

option to either:

Note: This function erases all messages in a selected box. To delete a single

message, open the box from the Messages menu, highlight a message,

open the message if you want, then press Erase to delete it.

•

Listen Now — Calls your voice mailbox and allows you to listen to

your messages.

1. In standby mode, press the Msgs soft key, then select

•

Listen Later — Returns you to standby mode where you can later

choose to call your mailbox and review your messages.

Erase Messages

Select an option to perform its function.

The following options appear in the display:

Listen to Voicemail Later

• Inbox — Deletes all unlocked messages stored in the Inbox.

• Outbox — Deletes all unlocked messages stored in the Outbox.

• Drafts — Deletes all unlocked messages stored in the Drafts box.

If you choose to review your voicemail messages at a later time:

1. In standby mode, press the Msgs soft key, then select

Voicemail. The Voicemail screen appears in the display,

showing the number of new voicemail messages received

and the date and time the latest message was received.

• AllMessages — Deletes all unlocked messages stored in all of the

message boxes, except Voicemail.

Messaging

2. Select the messages that you wish to delete. You’re

prompted to confirm the erasure of all messages in the

selected box or in all boxes.

• Callback # — Choose whether to include a callback phone

number with your outgoing messages, and enter the number to be

included.

• Signature — Choose whether to include a text signature in

outgoing message text, and enter the text to be included.

3. To delete the messages, press the Yes soft key. To cancel

• Reminder — Select whether and how often you will hear and/or

deleting the messages, press the No soft key.

feel a reminder that you have received a message (Once Every 2

Message Settings

Minutes Every 15 Minutes, Off).

Use the Msg Settings sub-menus to define general settings and

2. Select the desired option to enter the highlighted option’s

text message settings.

sub-menu.

General Message Settings

1. In standby mode, press the Msgs soft key, then press Msg

Editing and Entering Quick Text

1. In standby mode, press the Msgs soft key, then select Msg

Settings

➔

General.

Settings

appears in the display.

2. To create a new Quick Text:

Press New

➔

General

➔

Quick Text. The Quick Text sub-menu

The following options appear in the display:

• Auto Save — Choose whether your messages are saved

automatically when you exit them (On Off, Prompt).

•

• Auto Erase — Choose to receive (On) or not receive (Off) a

warning message when you delete a message.

Tip: You can also create new Quick Text by viewing/editing an Outbox or

Drafts message and using the Save Quick Text option in the Options

on page 61.)

• Quick Text — Edit your pre-composed messages, which can then

be inserted into new messages.

• Voicemail # — Edit or view your Voicemail number.

•

Enter/change the text content of your Quick Text using the keypad.

(For more information, refer to “Entering Text” on page 35.)

• Entry Mode — Choose the default method for entering text into

messages (T9 Word Abc, ABC, 123).

•

Once you’re finished entering your Quick Text, press OK. The Quick

Text menu appears in the display with your new Quick Text

highlighted.

• Auto Scroll

—

On/Off — With Auto Scroll On, the full content of a

text message automatically rolls upward on the display, one screen-

full at a time.

3. To change a Quick Text:

2. Select the desired option to enter the highlighted option’s

sub-menu.

•

Highlight a Quick Text you want to change, then press EDIT. (You

cannot change the pre-defined Quick Text included with your

phone.)

Picture Message Settings

1. In standby mode, press the Msgs soft key, then select Msg

Note: You cannot change or erase pre-loaded Quick Texts.

Settings

➔

Picture Message. The following options appear

in the display.

•

Enter/change the text content of your Quick Text using the keypad.

(For more information, refer to “Entering Text” on page 35.)

• Auto Receive — On/Off — With Auto Receive On, Picture

messages automatically download and display as they are

received. With Auto Receive Off, you are prompted to download

Picture messages.

4. To erase a Quick Text:

•

Highlight a Quick Text you want to erase, then press Erase. You are

prompted to confirm erasure of the highlighted Quick Text.

• Signature — Create a signature, which can be included at the

bottom of outgoing Picture message text.

•

To erase the highlighted Quick Text, press Yes. To keep it, press No

Text Message Settings

2. Select the desired setting to enter the highlighted option’s

1. In standby mode, press the Msgs soft key, then select Msg

Settings Text Message. The following options appear in

sub-menu.

➔

the display:

• Auto View

—

On/Off — With Auto View On, the full content of a

text message appears in the display as the messages is received.

• Signature — Create a signature, which can be included at the

bottom of outgoing message text.

Messaging

Section 8: Music Player

This section explains how to use your Music Player to:

Bluetooth headset (such as the optional Samsung SBH700 or

SBH500.) (For information on available accessories, contact your

Wireless Carrier.)

•

Play individual music files.

Create, play, and manage Playlists of music files.

Launching the Music Player

This section also explains how to customize your Music Player to

suit your music playback preferences.

Note: Before launching the Music Player, you must install a microSD™

Memory Card containing music files in your phone. (For more

information, refer to “Install a Memory Card” on page 8 and “Loading

Music Files” on page 70.)

Finally, this section details how to load music files onto a

microSD™ Memory Card.

Using Your Music Player

With the Flip Closed

You can use your Music Player to play music files that you have

transferred onto an optional microSD™ Memory Card using a

personal computer. (For information on loading music files on a

Memory Card, see “Loading Music Files” on page 70.)

1. In standby mode, press and hold the

Play / Pause key ( ), located below

the front display. The Music Player Now

Playing list appears in the front display.

You can launch the Music Player and play music files with the flip

open or closed.

2. To play a music file, turn the Jog Wheel

on the outside of the flip to highlight

the file in the Now Playing list, then

Your TwoStep’s Music Player can play music in the following

Digital Audio Formats:

• Unprotected AAC and AAC+ • MP3 • WMA and WMA Pro

press

. The Music Player screen

Your Music Player can play music through the phone’s stereo

speakers, through stereo headphones, through a stereo headset

(such as the optional Samsung AAEP404), or through a stereo

appears in the front display and the

selected file begins playing.

• All — Lists all music files on the Memory Card and lets you play

individual music files or play multiple music files by creating a

temporary music playlist.

Note: You can also press the Volume key on the left side of the phone Up or

Down to highlight a music file.

• Artists — Lists artist names for music files on the Memory Card

With the Flip Open

and lets you play one or more music files by a selected artist.

1. In standby mode, press the

Music Player key ( ). The

Music Player screen appears

in the main display.

• Albums — Lists album titles for music files on the Memory Card

and lets you play one or more music files from a selected album.

• Playlists — Lists any playlists you have saved and lets you create,

save, and manage playlists.

3. Select the preferred Library option. A list of music files,

2. For information on selecting

and playing music files, refer

to “Using the Music Library” .

artists, albums, or playlists appears in the display.

If a list of artists, albums, or playlists is showing, select the

preferred artist, album, or playlist. A list of music files

appears in the display.

Tip: After launching the Music Player with the flip open, you can close the flip

without interrupting music playback.

4. Highlight a music file, then:

Using the Music Library

1. Launch the Music Player. (For more information, refer to

•

To play the file, press the Play soft key.

To select the file for playing or other options, press MARK

(

“With the Flip Open” on page 68.)

To select and apply any of the following options to the highlighted or

marked music file(s), depending the displayed music file list, press

the Options soft key:

2. Press the Library soft key. The Library menu appears in the

display showing the following options:

–

Mark All — Marks all listed music files for playing, removal, or

• Now Playing — Music Player mode only — Indicates number of

music files currently playing. Select this option (or press the Back

soft key) to return to the Music Player screen.

assignment of player settings.

Music Player

–

Add Songs — Lets you select music files in the All songs screen to

add to the Now Playing list.

–

During music playback, press Left to begin playing a previous file in the

list, press Left and hold to return to an earlier passage in the current

file; press Right to begin playing a succeeding file in the list, and press

Up to return to the Now Playing list.

Also during music playback, rotate to the left to reduce playback

volume, or rotate to the right to increase playback volume.

–

Add to Playlist — Adds this file to a selected Playlist.

Move to Another List — Moves the selected song from the current

Playlist to another Playlist.

–

Remove From List — Removes this file from the current list, but not

from the Memory Card.

•

Volume key:

–

Erase — Removes this file from the Memory Card and from all lists.

With the Now Playing list showing, press Up and Down to browse

through the list of music files.

During music playback, press Down to reduce playback volume, or

press UP to increase playback volume.

Song Info — Lists the title, artist, album, genres, copyright

information, time length, file size, and bit rate of the highlighted music

file.

–

Select the desired Option.

Flip Open

Music Player key

mode, press to launch the Music

Player.

Music Player Controls

Flip Closed

•

(

): In standby

•

Launch

Play Pause key:

–

In standby mode, press and hold to launch

the Music Player.

With the Now Playing list showing, starts

playback of the highlighted music file.

During music playback, press to pause/

resume playback.

•

Volume key

–

To play a music file louder, press the

Volume key Up.

To play a music file softer, press the

Volume key Down.

–

•

Navigation key:

•

Navigation

With the Now Playing list showing, rotate

to browse through the list of music files.

Volume wheel:

–

To pause/resume playing a music file, press

–

To stop playing a music file, press the Down navigation key.

To skip play to an earlier music file in the selected list, press the Left

navigation key.

–

To skip play to a later music file in the selected list, press the Right

navigation key.

To return to the selected list and choose another music file to play,

press the Up navigation key.

•

With your phone powered off, insert the Memory Card into your

phone. (For more information, see “Install a Memory Card” on

page 8.)

•

Power your phone on.

When the Memory Card icon (

) appears in the display, remove

•

Library soft key — Returns you to the Library screen.

Options soft key — Shows the following sub-menus and options:

the Memory Card from your phone. (For more information, see

“Remove a Memory Card” on page 9.)

–

Play Mode — Lets you change the play mode from Normal, Shuffle,

Repeat One, Repeat All, or Shuffle Repeat All.

Add to Playlist — Moves you to the Playlists menu to let you add a

selected music file to a playlist.

Remove From List — Deletes a selected music file from the Now

Playing list or the current Playlist.

Visual Supplement — Lets you change the Music Player visualization

to Simple View, Equalizer, Lyrics, or Album Art.

Memory Info — Displays the Memory Usage screen which lists

Memory Card usage and availability amounts.

Song Info — Lists the title, artist, album, genre, copyright information,

time length, file size, and bit rate of the selected music file.

2. Insert the Memory Card into a compatible card reader.

Note: Card readers vary. Follow the installation instructions included with

your card reader and personal computer.

3. Open the Memory Card reader drive and the “My_Music”

folder.

4. Drag or download music (MP3) files into the “My_Music”

folder.

5. Remove the Memory Card by following the removal

instructions for the Memory Card reader and for your

personal computer.

Select the desired option to launch the option or to access the sub-

menu.

6. Insert the Memory Card into your phone. (For more

Loading Music Files

information, see “Listen to Voicemail” on page 8.)

Using an Optional Card Reader

1. Before loading music files on a microSD™ Memory Card,

do the following:

Music Player

Using an Optional Data Cable

“Connected To PC” appears in the TwoStep display. Your

phone appears as a removable disk on your PC.

To obtain a USB-to-micro USB Data Cable compatible with your

TwoStep phone, contact your Wireless Carrier.

3. Copy or transfer your music files to the My_Music folder on

1. In standby mode, connect the smaller (micro USB) end of

your phone.

the Data Cable to your TwoStep phone.

4. Press the Done soft key on your phone. You are prompted

to confirm that you want to “Exit USM mode?

”

5. Press the Yes soft key. Your phone returns to standby

mode.

6. Disconnect the Data Cable.

Playlists

Correct

Playing a Playlist

1. Launch the Music Player. (For

more information, refer to

“With the Flip Open” on

page 68.)

Incorrect

2. Connect the larger (USB) end of the Data Cable to your PC.

2. Press the Library soft key, then

select Playlists

3. Highlight the desired playlist

and press the Play soft key. The Music Player screen

appears in the display and a music file begins playing.

Adding a Playlist

5. Highlight each file you want to

add to your new playlist and

press the MARK key ( ). A

check mark appears in each

selected file’s check box.

To create a new playlist, do the

following:

1. Launch the Music Player. (For

more information, refer to

“With the Flip Open” on

page 68.)

6. When you have marked all the

files you wish to add to your

2. Press the Library soft key, then

select Playlists. The Playlists

screen appears in the display.

playlist, press the Done soft

key. The Playlists screen

appears in the display, showing your new playlist.

3. If there are no playlists, press

the Add soft key. Otherwise,

press the Options soft key and

select Add New Playlist. The

Enter new name field appears.

7. To play your new playlist,

press the Play soft key.

8. To see a list of the files in your

playlist, press the VIEW

key( ).

4. Enter a name for your new

playlist. (For more information,

refer to “Entering Text” on

page 35.) A list of your music

files appears in the display.

9. For the following additional

options, press the Options soft

key:

• Add New Playlist — Lets you create a new playlist.

• Rename Playlist — Lets you change the name of this playlist.

Music Player

• Erase Playlist — Lets you remove this playlist from your phone.

• Add Songs — Lets you select songs and add them to this playlist.

• Move to Another List — Lets you select move the marked files in

this list to another playlist.

Note: Erasing a playlist does not erase the files listed in the playlist.

• Remove From List — Lets you erase marked files from this

Managing Files in a Playlist

1. Launch the Music Player. (For

more information, refer to

“With the Flip Open” on

page 68.)

playlist.

• Song Info — Shows the Title, Artist name, Album name, Genre,

File Name, Encoding Format, Bit rate, File Size, and time and Date

for a marked or highlighted file in this playlist.

2. Press the Library soft key, then

select Playlists. The Playlists

screen appears in the display.

3. Highlight the playlist whose

file list you wish to change, then press the VIEW key ( ).

The selected Playlist's file list appears in the display.

4. To mark files for change, highlight each file and press the

MARK key ( ). A check mark appears in each selected

file’s check box.

5. Press the Options soft key. The following options are

available:

• Mark All — Marks all files in this playlist.

Section 9: Camera

Use your TwoStep phone to take full color digital pictures, display

them on your phone’s vivid color display, and instantly share

them with family and friends. It’s fun, and as easy to use as a

traditional point-and-click camera. This section explains how you

can do the following:

Taking Snap Shots (Single Pictures)

To take a single picture using the current camera settings, do the

following:

1. In standby mode, press and hold the Camera key (

) on

the right side of the phone. The message “Please, Wait...

appears in the display followed by a camera view finder

screen. (For more information, refer to “Camera Screen

Layout” on page 77.)

”

•

Take pictures with your phone’s built-in digital camera.

Send your pictures to others in Picture messages.

Set the several options associated with the camera that help you take

crisp, clear pictures.

Taking Pictures

Taking pictures with the built-in

camera is as simple as

Note: You can also activate the camera by pressing Menu ( ), then

Camera

Lens

selecting Multimedia ➔ Camera.

2. Using the display as a

viewfinder, point the camera

lens (on the front of the flip,

near the hinge) at your

subject.

launching the camera, choosing

a subject, pointing the lens

(located on the front of your

phone’s flip, near the hinge), and

pressing a button.

3. When the image that you wish

to capture appears in the

display, press TAKE

(

Camera

4. To save the picture to memory, press the Save soft key.

2. Press the Options soft key.

The options menu bar appears

at the top of the camera

screen.

To erase the photo, press the Erase soft key.

Tip: You can change a number of the camera’s settings to suit particular

uses for your pictures. See “Camera Options” on page 78 for more

information.

3. Highlight the Shot Type icon

(

). The following Shot

Taking Multi Shot Pictures

Type options appear in the

When taking pictures of moving subjects or subjects you cannot

pose, such as children and pets, the camera’s Multi Shot mode

simplifies the process of taking multiple pictures in quick

succession. After taking Multi Shot pictures, the camera

automatically displays thumbnail views of the pictures you have

just taken so you can select the best picture(s) and discard the

rest.

display:

•

Single Shot — Lets you take 1 photo at a time.

Series Shot — Lets you take a series of 3 or 5 photos.

Divided Shot — Lets you take a mosaic of 4 or 9 photos.

Frame Shot — Lets you select a colorful frame to include around

your photos.

1. In standby mode, press and hold the Camera key (

) on

4. Select Series Shot or Divided Shot

the right side of the phone. The message “Please, Wait...

appears in the display followed by a camera view finder

screen. Your phone is now in camera mode. (For more

information, refer to “Camera Screen Layout” on

page 77.)

”

•

When you select Series Shot, the following options appear in the

display:

–

Off

3 Auto — Lets you take 3 photos automatically with one press of TAKE

(

3 Manual — Lets you take 3 photos in quick succession by pressing

TAKE ) for each photo.

5 Auto — Lets you take 5 photos automatically with one press of TAKE

–

(

Note: You can also activate the camera by pressing Menu ( ), then

selecting Multimedia ➔ Camera.

(

–

5 Manual — Lets you take 5 photos in quick succession by pressing

TAKE ) for each photo.

7. When the image that you wish to capture appears in the

display, press TAKE ). The camera takes one picture

(

•

When you select Divided Shot, the following options appear in the

display:

(Manual) or multiple pictures in quick succession (Auto),

then the Series Shot Select to Save screen or the Divided

Shot multiple-photo screen appears in the display.

• Series Shot:

–

Off

4 Auto — Lets you take 4 shots automatically that are combined into a

single, mosaic photo, all with one press of TAKE

4 Manual — Lets you take 4 shots in quick succession by pressing

TAKE ) for each shot, with all 4 shots being combined into a single,

(

–

To save the pictures to memory,

(

press the Done soft key.

mosaic photo.

–

To discard the pictures, press

–

9 Auto — Lets you take 9 shots automatically that are combined into a

single, mosaic photo, all with one press of TAKE

9 Manual — Lets you take 9 shots in quick succession by pressing

TAKE ) for each shot, with all 9 shots being combined into a single,

mosaic photo.

(

5. Select the desired setting.

A Series Shot progress bar (

) or a

•

Divided Shot:

–

To save the pictures to memory,

press the Save soft key.

To send the picture in a picture

Divided Shot icon (

) (which acts as a progress bar

while pictures are being taken) appears in the display.

6. Using the display as a viewfinder, point the camera lens at

message, press Send

(

your subject.

To discard the pictures, press the

Erase soft key.

Camera

Series Shot in use — Takes a series

Camera Screen Layout

(

) of photos automatically or

When you activate your phone’s

camera, the top two lines of the

display are reserved for camera

icons (when active). The center of the

display shows a viewfinder image of

the subject at which the camera is

pointed.

manually when you press the

key. The number of

photos taken depends upon the Series Shot setting.

Divided Shot in use — Takes multiple shots

automatically (

) or manually (

) when you press the

key. The number of shots taken depends upon the

Divided Shot setting. All shots are combined into a single,

mosaic photo.

Camera Screen Soft Keys

Frame Shot in use — Takes one photo each time you

The soft key labels on the bottom line of the display change to

the following:

press TAKE

(

). Each photo is surrounded by a selected,

colorful frame.

•

My Images — Pressing the Left soft key opens the My Images

multimedia folder so you can view or manage your stored pictures.

(See “My Images” on page 83 for more information.)

Camera Resolution — Indicates camera’s current

resolution setting. (You can change the camera resolution

setting. See “Camera Options” on page 78 for more

information.)

•

TAKE — Pressing

takes a picture of the subject currently

appearing in the camera view finder screen.

Options — Pressing the Right soft key opens a menu bar of camera

options and settings.

Night Shot — Lets you take photos in low light.

Self Timer in use — Delays the camera shutter from 2 to

Camera Screen Icons

10 seconds after you press

Camera — Indicates the camera is active.

Quality — Indicates camera’s picture quality setting. (You

can change the picture quality setting. For more

information, refer to “Quality” on page 80.)

Single Shot in use — Takes one photo each time you

press TAKE ).

(

White Balance — Indicates camera’s white balance

setting. (You can change the camera white balance

setting. For more information, refer to “White Balance”

on page 80.)

Pictures are stored in the My Images folder, which is part of the

phone’s memory and/or card memory devoted to storing, browsing,

and viewing saved pictures. (See “My Images” on page 83 for more

information.)

•

Send the picture to someone else by pressing Send

For a detailed procedure, see “Send Picture Messages in Camera

Mode” on page 54.

(

Photo Limit — Indicates the available number of

photos you can take. (Depending on the camera

resolution setting.)

Discard the picture by pressing the Erase soft key.

Phone Memory — Indicates photos will be stored in the

phone’s memory.

If Auto Save is set to On, these options are not available. After

pressing TAKE ), the picture(s) is (are) automatically saved,

Card Memory — Indicates photos will be stored on a

(

microSD Memory Card.

and you are returned to the camera screen.

Zoom — Enlarges the image from X0 to X7 before you

take a picture. (Depending on the camera resolution

setting. For more information, refer to “Zoom” on

page 83.)

Camera Options

The Camera Options let you temporarily adjust default camera

settings to suit available lighting, the subject of the photo, or the

purpose of the photo, for the current camera session. When you

exit the camera, your Camera Options values revert to their

default values.

Brightness — Brightens or darkens the image from -4

to +4 before you take a picture. (For more information,

refer to “Brightness” on page 83.)

To access Camera Options, do the following:

1. In camera mode, press the Options soft key. The Camera

Options menu appears in the display, containing the

following sub-menus:

Picture Options

After you take a picture, the following options are available (if

Auto Save is set to Off):

Save the picture by pressing the Save soft key.

•

Shot Type

Camera

•

Series Shot — Lets you take a series of 3 or 5 photos (3 Auto

3 Manual 5 Auto 5 Manual).

Resolution

Night Shot

Self Timer

Quality

Divided Shot — Lets you take a mosaic photo of 4 or 9 shots

4 Auto 4 Manual 9 Auto 9 Manual).

(

Frame Shot — Lets you select a colorful frame to include around

your photos (use the Left and Right navigation keys to preview

available frames).

White Balance

Color Effect

Settings

Note: The None frame is a blank frame.

2. Select the desired Shot Type.

Resolution

Resolution lets you change the clarity (in pixels) and size (in

bytes) of your pictures.

2. Select a sub-menu, then select a preferred value.

The following sub-sections describe camera options and

available values.

1. In camera mode, press the Options soft key, then highlight

the Resolution setting. The following values appear in the

camera screen:

Shot Type

Shot Type lets you take multiple photos or shots in succession at

the touch of a key and/or add colorful frames to your photos.

•

1280 X 960 (pixels)

640 X 480 (pixels)

320 X 240 (pixels)

176 X 144 (pixels)

1. In camera mode, press the Options soft key, then highlight

the Shot Type icon (

following values appear in the camera screen:

Single Shot — Lets you take 1 photo at a time.

). The

2. Select the desired Resolution value.

•

Note: The Resolution setting affects zoom capabilities. When Resolution is

set to 1280 X 960, zoom is not available. When Resolution is set to any

value lower than 1280 X 960, zoom settings X0 – X7 are available.

Note: If you select 2 Sec., 5 sec., or 10 sec., a Self Timer icon (

)

appears in the camera screen in the display.

The next time you press

, the countdown Self Timer

Night Shot

indicates the time remaining before the camera takes the

picture. The phone reads the countdown timer value to you

beginning with two or three and continuing to zero, when

the picture is taken.

Night Shot lets you take pictures in low light conditions.

1. In camera mode, press the Options soft key, then highlight

. The following options appear in the display:

• Off

Tip: To stop the countdown timer without resetting it, press

• On

2. Select the Night Shot setting of your choice.

Quality

Self Timer

You can affect how much your photo is compressed, thereby

reducing it’s overall size (not to be confused with resolution).

Self Timer lets you delay taking a picture long enough to let you

join others in a picture.

3. In camera mode, press the Options soft key, then highlight

1. In camera mode, press the Options soft key, then highlight

the current Quality indicator (

E). The following values

appear in the camera screen: Fine, Normal, or Economy.

4. Select the desired Quality value.

White Balance

The following values appear in the camera screen:

•

Off

2 Sec.

5 Sec.

10 Sec.

White Balance allows you to adjust picture quality according to

available light.

2. Select a Self Timer value.

Camera

5. In camera mode, press the Options soft key, then highlight

selected color effect previews in the display before you take the

picture.

the White Balance icon (such as,

). The following

7. In camera mode, press the Options soft key, then highlight

values appear in the camera screen:

. The following values appear in the display:

•

Auto — The camera automatically adjusts picture quality to

available light.

•

Normal — Subjects and pictures appear with a normal hue.

Black&White — Subjects and pictures appear in black and white.

Sepia — Subjects and pictures appear in a brownish-gray hue.

Negative — Subjects and pictures appear in inverted colors.

Green — Subjects and pictures appear in a greenish hue.

•

Sunny — Use this setting when taking pictures in full sun.

Cloudy — Use this setting when taking pictures in cloudy

conditions.

Tungsten — Use this setting when taking pictures under

incandescent lights.

•

Note: Choose Normal to disable Color Effects.

Fluorescent — Use this setting when taking pictures under

fluorescent lights.

8. Select the Color Effects value of your choice. The camera

viewfinder screen appears in the display with your

selected Color Effects value applied.

Each option, as you highlight it, shows the effects it has on

a picture.

6. Select the desired White Balance value. The camera

viewfinder screen appears in the display with your

selected White Balance value applied.

When you take your next picture, the camera applies your

selected Color Effects value to your picture.

Settings

The next time you press

, the camera applies your

selected White Balance value to your picture.

When you change Camera Settings values, your changes are

saved for future camera sessions, unlike changes to Camera

Options. To restore Camera Settings to their default values, select

Reset Settings. (For more information, refer to “Reset Settings”

on page 83.)

Color Effect

Change the look of your pictures with Color Effect. Choose from

eight available settings such as Gray, Negative, and Sepia. The

Memory

•

Display All — Shows camera icons as seen in “Camera

Screen Icons” on page 77.

1. In camera mode, press the Options soft key, highlight

Guideline — Shows a cross hatch pattern in the view finder

screen.

No Icons — Shows a nearly full-display subject image and without

icons.

, then select Memory. The following storage options

appear in the display:

• Phone — Stores your photos in phone memory.

6. Select the viewfinder screen setting of your choice. You’re

• Card — Stores your photos on an optional microSD Memory Card.

2. Select the memory location setting of your choice. An icon

returned to the camera viewfinder screen.

View Mode

(

) appears in the lower left corner of the

7. In camera mode, press the Options soft key, highlight

, then select View Mode. The following values appear

in the display:

camera screen to indicate where photos will be stored.

Auto Save

3. In camera mode, press the Options soft key, highlight

, then select Auto Save. The following values appear

in the display:

•

Landscape — Shows a wider, more panoramic view of the

subject.

•

Portrait — Shows a narrower, more vertically oriented view of the

subject.

•

Off

8. Select the View Mode setting of your choice. You’re

returned to the camera viewfinder screen, which now

shows the selected view.

4. Select the automatic save value of your choice. You’re

returned to the camera viewfinder screen.

Shutter Sound

Icon Display

5. In camera mode, press the Options soft key, highlight

, then select Icon Display. The following values

appear in the display:

Choose from four different sounds whenever you take a picture.

Aside from being a cool sound effect, Shutter Sounds acts as an

audible reminder that your camera has taken a picture.

Camera

9. In camera mode, press the Options soft key, highlight

, then select Shutter Sound. The following shutter

sounds appear in the display:

affects of your changes).

The next time you press

, the camera takes an

enlarged picture according to your selected Zoom setting.

•

Off

Shutter

Brightness

Brightness lets you temporarily lighten the pictures you take.

Increasing the Brightness (-4 – +4) lightens your pictures (0 is

normal).

DingDong

10. Select the shutter sound value of your choice. You’re

ᮣ

In camera mode, press the Navigation key Left or Right to

adjust the Brightness (the screen image lightens or

darkens to show the affects of your changes).

returned to the camera viewfinder screen. The next time

you press

, you’ll hear your selected shutter sound.

Reset Settings

The next time you press

, the camera takes a lighter or

11. In camera mode, press the Options soft key, highlight

, then select Reset Settings. You are prompted to

confirm reset of all camera settings.

darker picture according to your selected Brightness

setting.

My Images

Saved pictures are stored in the My Images folder. You can

browse the pictures one at a time (expanded mode), or view

several pictures at once in thumbnail format.

•

Select the Yes option to reset the camera settings to default values.

Select the No option to keep the current camera settings.

Zoom

Zoom lets you temporarily enlarge the pictures you take.

Increasing the Zoom (X0 – X7) enlarges your pictures (0 is

normal).

1. In camera mode, press the My Images soft key. Any

pictures that you’ve saved appear in the display.

ᮣ

In camera mode, press the Navigation key Up or Down to

adjust the Zoom (the screen image enlarges to show the

4. Select the desired option to perform the function for the

Tip: You can also access the My Images folder by pressing Menu

selecting Multimedia My Images. (For more information, refer to “My

Images” on page 88.)

(

) and

option or enter its sub-menu.

➔

2. Use the Navigation key to browse pictures in the gallery.

3. Press the Options soft key while viewing pictures in the

Gallery. The following options appear in the display:

•

Send — Send the currently displayed or highlighted picture as a

Picture message or via a Bluetooth connection.

•

Set As — Assign the currently displayed or highlighted picture to

be Main display Wallpaper, Front display Wallpaper, or as a Picture

ID for someone in your Contacts list.

•

Rename — Rename the currently displayed or highlighted picture.

• Move — Move the currently displayed or highlighted picture

between phone memory and an optional Memory Card.

• Copy — Save a copy of the currently displayed or highlighted

picture to phone memory or an optional Memory Card.

•

Lock Unlock — Lock the currently displayed or highlighted

picture so that it cannot be deleted, or unlock the picture so that it

can be deleted.

Erase Files — Erase selected unlocked pictures in the Picture

Gallery. Locked pictures must be unlocked before you can erase

them.

Picture Info — View the Title, time and date created, size, and

resolution of the currently highlighted or displayed picture.

Camera

Switch From Expanded to Thumbnail Mode

1. Highlight a picture that you wish to view full size, then

press VIEW

2. To return to the thumbnail view of your photos, press VIEW

(

Point, Click, and Send Pictures

Take a picture and send it to anyone with a compatible device in

a few easy steps.

1. In camera mode, take a desired picture by pressing

2. Press Send ( ). The Create Pic Msg screen appears in

the display.

3. Enter or Add the recipient’s phone number or Email

address using the keypad.

4. Press OK

(

). The address(es) are saved and the Subject

field appears in the Create Pic Msg screen. Use the

Navigation key to move to the other message fields. (For

more information, refer to “Messaging” on page 52.)

5. When you are finished composing your message, press

SEND ( ) to send the Picture message to the intended

recipients.

Section 10: easyedge^SM

With easyedge , you can download multimedia, applications,

The easyedge shop tab lets you locate, purchase (when

games, and check news and sports.

required), and download an application, ringtone, or other

multimedia files.

Tip: You can access easyedge^SMGames home page directly from standby

mode by tapping the Menu soft key, then selecting Games

Launching an Application

1. In standby mode, tap the Menu

Note: easyedge^SMfrom U.S. Cellular is only available on approved phones

and requires an easyedge^SMdata plan. Visit www.uscellular.com/

easyedge or call U.S. Cellular customer service (by dialing 611 on your

soft key, then select easyedge

The easyedge screen

phone) and ask about easyedge^SM

appears in the display with the

Accessing easyedge

myapps tab showing.

With easyedge , you can download

full featured applications over the air

including games, personalized ring

tones, pictures, and more.

2. Press the Right Navigation

key.

The my stuff tab shows, listing any applications (apps) you

have downloaded.

ᮣ

In standby mode, tap the Menu

soft key, then select easyedge

3. Highlight the application you wish to run, then press

The easyedge screen

Finding and Downloading Applications

appears in the display with the

1. In standby mode, tap the Menu soft key, then select

easyedge shop tab showing.

easyedge. The easyedge screen appears in the display

with the easyedge shop tab showing.

easyedgeSM

2. Follow the prompts to locate, purchase (when required),

and download an application, ringtone, or other

multimedia files.

Section 11: Multimedia

This section outlines your phone’s multimedia functions and key

features associated with multimedia.

2. Select the desired sub-menu. The following sections

describe the above listed sub-menus in greater detail.

Accessing Multimedia

My Images

1. In standby mode, press Menu ( ), then select

Multimedia. The following sub-menus appear in the

display:

My Images lets you choose the pictures that appear in your

phone’s display while in standby mode (Wallpaper) and as picture

IDs for your contacts.

•

Camera — Lets you launch and set up your phone’s camera. (For

more information, refer to “Camera” on page 74.)

My Images — Lets you choose the pictures that appear in your

phone’s display or in picture messages.

1. At the Multimedia menu, select My Images. A 2-by-2

matrix of thumbnail images of your pictures appears in the

display.

•

• Music Player — Lets you play music files stored on an optional

microSD Memory Card. (For more information, refer to “Music

Player” on page 67.)

Tip: You can also access My Images from:

– The Camera screen by pressing the Gallery soft key

•

My Ringtones — Lets you assign ringtones for Ringtone (calls),

Contact ID, and Alert Tone.

My Sounds — Lets you assign sound files as ringers for Ringtone

(calls), Contact ID, and Alert Tone.

– The Edit Contact screen by selecting the picture ID field and pressing

the Set soft key.

•

2. Highlight a picture, then press

to expand the

highlighted picture to fill the screen.

Tip: To launch the Multimedia menu using a voice command — In standby

mode, press and hold until the phone prompts, “Say a command.”

Say “Go to Multimedia” into the microphone.

3. Press the Options soft key.

Multimedia

4. A pop-up menu containing the following options appears in

1. At the Multimedia menu, select My Ringtones. A list of

the display:

ringtones appears in the display.

•

Send — Send the currently displayed or highlighted picture as a

Picture message or via a Bluetooth connection.

Tip: You can also access My Ringtones from:

•

Set As — Assign the currently displayed or highlighted picture to

be Main display Wallpaper, Front display Wallpaper, or as a Picture

ID for someone in your Contacts list.

–A Set Alarm screen by selecting the Ringer option, highlighting the

second (file name) field, pressing the Left or Right navigation key, and

selecting My Ringtones.

(For more information, refer to “Alarm Clock” on page 102.)

•

Rename — Lets you rename the picture.

–The Edit Contact screen by selecting the Ringtone field, pressing the

Set soft key, and selecting My Ringtones.

(For more information, refer to “Editing a Contacts Entry” on page 43.)

• Move — Move the currently displayed or highlighted picture

between phone memory and an optional Memory Card.

• Copy — Save a copy of the currently displayed or highlighted

picture to phone memory or an optional Memory Card.

•

2. Use the Navigation key to highlight a particular ringtone.

Lock Unlock — Lets you prevent/permit picture deletion.

•

Press

to PLAY the ringtone.

Erase Files — Erases one or more selected pictures.

Picture Info — Displays information about the picture, such as

Press the Info soft key to show the Title and File Type.

3. Press the Set As soft key to assign the highlighted

the picture Name, creation Date and Time

Resolution, and the

data Size

ringtone. The following options appear in the display:

5. Select the desired option.

•

Ringtone — Lets you assign the selected ringtone to incoming

voice calls.

Contact ID — Lets you assign the selected ringtone as the

distinctive ringer for a Contact.

6. To return to the previous menu, press

. To return to

standby mode, press

My Ringtones

My Ringtones lets you assign ringtones (preloaded and

downloaded) for Ringtone, Contact Id, and as Alert Tone.

Alert Tone — Lets you assign the selected ringtone to All Msg

Text Msg Picture Msg, or Voicemail Msg

4. Select the desired option.

5. When using a downloaded ringtone, press the Options soft

2. Use the navigation keys to highlight the Record New

option, then press to record a voice memo. (See

key and the following options appear in the display:

“Record New Voice Memo” on page 91 for more

•

Lock Unlock — Lets you prevent/permit file deletion

Erase — Erases the selected file

Rename — Lets you rename the selected file

Ringtone Info — Displays information about the selected file,

such as the file name, the file type, and the data size

information.)

3. Press the Options soft key.

•

For a preloaded sound file, a pop-up menu containing the following

options appears in the display:

6. Select the desired option.

–

Send — Lets you send the selected sound file to a specified recipient in

7. To return to the previous menu, press

. To return to

a Picture message.

standby mode, press

–

Set As — Lets you assign the selected sound file as the Ringtone or

as the Contact ID for a Contact or an Alert Tone for Text, Picture, or

Voicemail messages.

My Sounds

My Sounds lets you record voice memos and lets you assign

preloaded and downloaded sound files as Ringtones, Contact IDs,

or Alert Tones.

–

Erase All — Erases all sound files.

Sound Info — Displays information about the sound file, such as the

Title, File Size, and File Type.

•

For a recorded sound file, a pop-up menu containing the following

options appears in the display:

1. At the Multimedia menu, select My Sounds. Record New

and a list of sound files appears in the display.

–

Send — Lets you send the selected sound file to a specified recipient in

a Picture Message or to another device Via Bluetooth connection.

Tip: You can also access My Sounds from:

–

Set As — Lets you assign the selected sound file as the Ringtone or

as the Contact ID for a Contact or an Alert Tone for Text, Picture, or

Voicemail messages.

–A Set Alarm screen by selecting the Ringer option, highlighting the

second (file name) field, pressing the Left or Right navigation key, and

selecting My Sounds

–

Rename — Lets you rename the sound file.

–The Edit Contact screen by selecting the Ringtone field, pressing the

Set soft key, and selecting My Sounds.

Lock

Unlock — Lets you protect the sound file from being deleted.

Erase All — Erases all sound files.

Multimedia

–

Sound Info — Displays information about the sound file, such as the

Title, File Size, and File Type.

•

The maximum length for a single voice memo is 60 seconds.

Record a Voice Memo

•

For a downloaded sound file, the following options appear in the

display:

–

1. At the Multimedia menu, select My Sounds ➔ Record

New. The Record New screen appears in the display.

Send — Lets you send the selected sound file to a specified recipient in

a Picture message.

Tip: You can also set your phone to record a Voice Memo while in a call. This

lets you record the phone call. (For more information, refer to “The In-

Use Options Menu” on page 26..)

–

Set As — Lets you assign the selected sound file as the Ringtone or

as the Contact ID for a Contact or an Alert Tone for Text, Picture, or

Voicemail messages.

–

Rename — Lets you rename the sound file.

2. Press

, then start speaking. As it is recording the phone

Lock Unlock — Lets you protect the sound file from being deleted.

displays a countdown timer that shows the seconds

remaining for the recording.

Erase All — Erases all sound files.

Sound Info — Displays information about the sound file, such as the

file name, file type, and the data size.

•

To pause the memo, press the Pause soft key. When a memo is

paused, select Resume to continue recording.

4. Select the desired option.

3. Press

once you’re finished recording. The new

5. To return to the previous menu, press

. To return to

recording is automatically saved.

standby mode, press

Review Voice Memos

Record New Voice Memo

If you’ve saved any voice memos, you can review them anytime.

1. At the Multimedia menu, select My Sounds. A list of

sound files appears in the display.

You can use your phone to record voice memos for later

playback. You can also record the caller on the other end of the

line during a phone conversation.

2. Use the navigation keys to highlight the voice memo you

Note: There is limited space for the length of recordings.

wish to review.

3. Press

to play the voice memo.

•

To stop the memo, press . Press

memo.

again to restart playing the

When the voice memo finishes playing, the selected voice

memo remains highlighted in the list of sound files.

Erase a Voice Memo

1. At the Multimedia menu, select My Sounds. A list of

sound files appears in the display.

2. Use the navigation keys to highlight the voice memo you

wish to erase.

3. Press the Erase soft key. “Erase Sound?” appears in the

display.

4. Press the Yes soft key to erase the selected voice memo or

press the No soft key to return to the list of sound files.

Multimedia

Section 12: Bluetooth

Bluetooth is a short-range wireless communications technology

capable of exchanging information over a distance of about 30

feet without requiring a physical connection.

display:

• Add New Device

• Registered List

Unlike infrared, you don't need to line up the devices to beam

information with Bluetooth. If the devices are within a range of

one another, you can exchange information between them, even

if they are located in different rooms.

• Bluetooth Settings

2. Select the desired Bluetooth sub-menu.

Add New Device

The Bluetooth wireless technology settings menu provides the

ability to view and change the device name, show the visibility,

and set the security for the device.

To search for available Bluetooth devices:

1. At the Bluetooth menu, select Add New Device.

If Bluetooth is off, you are prompted to “Turn Bluetooth

Turn Bluetooth On/Off

on?”.

When the Bluetooth is turned on, you can use the Bluetooth

features available. When the Bluetooth is turned off, you cannot

send or receive information via Bluetooth. To save battery life or

in situations where Bluetooth use is prohibited, such as airline

traveling, you can turn off the Bluetooth wireless technology

headset. (For more information, refer to “Bluetooth Settings” on

page 94.)

•

To turn Bluetooth on, press the Yes soft key.

To leave Bluetooth off, press the No soft key.

“

Place device you are connecting to in discoverable mode”

appears in the display.

2. Place the Bluetooth device in discoverable mode. (For

more information, refer to the device user manual.)

Accessing Bluetooth

1. In standby mode, press Menu ( ), then select

3. Press

display.

. Names of the available devices appears in the

Bluetooth. The following sub-menus appear in the

4. Highlight the device you want to pair with your phone.

• Enable Disable — Turns Bluetooth on or off.

• Discovery Mode — Lets other devices “see” (access) your device.

Select On for other devices to see your device, or Off for no visibility.

• Device Name — Shows the handset name. You may change this

5. Press PAIR ( ) to pair the selected device with the

phone. You are prompted to enter the passkey or PIN for

the selected device. (For more information, refer to the

device user manual.)

name. Enter text changes and press

to save them.

• Supported Profiles — Lists and explains the Bluetooth profiles

supported by your phone.

6. Enter the device passkey or PIN and press

• Device Info — Shows the Bluetooth Type, Status, and Address of

your phone.

2. Select the desired option to perform the related process.

Registered List

Registered List provides a list of Bluetooth wireless technology

devices previously connected to your handset.

ᮣ

At the Bluetooth menu, select Registered List. The

Bluetooth screen appears in the display showing a list of

devices previously connected to your device.

Connecting to a Bluetooth Device

From the Registered List,

ᮣ

Select the desired device.

Note: If you are unable to pair with the device a pop-up appears in the

display. To retry, press the Yes soft key.

Bluetooth Settings

1. At the Bluetooth menu, select Bluetooth Settings. The

following options appear in the display:

Bluetooth

Section 13: Calendar

–

Go to Today — Lets you jump to today’s date.

Erase Old — Lets you erase past events.

Erase all — Lets you erase all events.

Calendar lets you view the current, past, or future month in a

monthly calendar layout. While viewing the calendar, the current

date is highlighted and days with scheduled events are

surrounded by a box.

Select the desired option to perform the related process.

View an event

3. Open the highlighted date by pressing

. A list of

1. In standby mode, press Menu ( ),

scheduled events appears in the display.

then select Calendar.

4. Select the desired event. Information for the selected event

A calendar appears in the display

with the current date highlighted.

The month and year also appear.

appears in the display.

Add a New Event

1. In standby mode, press Menu ( ),

2. Use the following keys to navigate your calendar and

then select Calendar.

highlight a desired date.

A calendar appears in the display

with the current date highlighted.

The month and year also appear.

•

To move from one day to another, use the Left/Right navigation

keys.

•

To move from one week to another, use the Up/Down navigation

keys.

2. Highlight the date of the new event.

•

To view previous months, press the Volume key Up.

3. Press the Add soft key. The New Event screen appears in

To view future months, press the Volume key Down.

To access other options, press the Options soft key while viewing

the calendar. The following options appear in the display:

the display.

–

Go to Date — Lets you jump to any date you specify.

4. To select and enter details of the event, use the Navigation

key and the keypad. (For more information, refer to

“Entering Text” on page 35.)

10. To store the event in your calendar, press

. An alert will

notify you prior to the event, if you set a notification alert.

5. Enter the start and End dates and times for the event using

the keypad. Enter the dates and times for the event using 2

digits for day, month, hour, and minute entries. Use 4 digits

for year entries.

6. To change between AM and PM, use the Left and Right

navigation keys.

7. When you’re finished entering the dates and times, to

highlight the Alert field, use the Up and Down navigation

keys. To select a type of alert, use the Left and Right

navigation keys.

8. Highlight the Reminder field, and set the Reminder to Off

or to select a reminder interval using the Left and Right

navigation keys.

9. Highlight the Alert time field, use the Up and Down

navigation keys, then select the amount of time before the

event occurs that you wish to be notified by an alert using

the Left and Right navigation keys.

Calendar

Section 14: Tools

This section explains how to use your phone’s digital assistant

tools to schedule events, set reminders, perform calculations,

and more.

•

Converter — Lets you convert currencies (according to the latest

rates) and weights, measures, and temperatures from one system

or increment to another.

Tip Calculator — Lets you quickly calculate service gratuities with

a minimum of key presses.

Tools Menu

Tools is a suite of Personal Information Manager (PIM)

applications such as a Calendar, and Memo Pad that run on your

phone. You can use your phone to schedule events, set

reminders, perform calculations, and more with the functions

provided by this useful feature.

Tip: To launch the Tools menu using a voice command — In standby mode,

press and hold

until the phone prompts, “Say a command.” Say

“Go to Tools” into the microphone.

2. Select the desired Tool sub-menu.

The following sections provide detailed descriptions of the

Tools and how to use their functions.

Opening Tools Menu

1. In standby mode, press Menu ( ), then select Tools. The

following sub-menus appear in the display:

Voice Service

VoiceSignal is state-of-the-art voice recognition software for your

mobile phone that lets you dial numbers, lookup contact

information, and open applications using your voice. To access

your phone’s voice settings, do the following:

•

Voice SVC — Lets you access voice recognition functions.

Memo Pad — Lets you store and review useful information.

Alarm Clock — Lets you set an alarm to go off once, or daily, at a

specified time.

World Time — Lets you view the current time of day or night in

another part of the world.

Calculator — Lets you perform calculations, including addition,

subtraction, multiplication, and division.

Stop Watch — Lets you view the amount of time.

•

1. At the Tools menu, select Voice SVC.

the digits in the number. (For more information, refer to “Making a

Call — Voice Dialing” on page 24..)

Send Text — Lets you launch the Create Txt Msg screen. (For more

information, refer to “Create and Send Text Messages” on

page 52..)

Send Picture — Lets you launch the Create Pic Msg screen. (For

more information, refer to “Send Picture Messages in Standby

Mode” on page 56.)

Lookup — Lets you look up and display contact information for any

name stored in your Contacts list by saying the name. (For more

information, refer to “Finding a Contacts Entry” on page 39..)

Go to — Lets you access all of the Main Menus on your phone.

Check — Lets you check your phone's status (that is, network

coverage, signal strength, and battery in the same report), network

coverage, signal strength, battery, and phone number.

The following options appear in the display:

•

Voice Commands — Lets you place calls, access your Contacts

List, review your appointments, and more by speaking commands

into your phone. (Also see “Making a Call — Voice Dialing”

on page 24 and “Voice Method” on page 40 for more

information.)

–

•

Voice Settings — Lets you adjust VoiceSignal to better suit your

needs.

2. Select the desired sub-menu.

Voice Commands

To start VoiceSignal, do one of the following:

–

•

In standby mode, press and hold

“

Say a Command” appears in the display and is pronounced through

the earpiece, followed by a list of available commands.

•

At the Tools menu, select Voice SVC ➔ Voice Command

Note: Speaking clearly, say the command that you want to use.

Note: You can set your phone to start VoiceSignal when you open the phone.

If, after a few seconds, the device has not recognized a command, it

prompts you to repeat the command.

(For more information, refer to “Voice Launch” on page 101.)

VoiceSignal includes the following commands:

If, after a few more seconds, it still has not recognized a command, it

tells you “Sorry, no match found,” and cancels voice recognition.

–

Call — Lets you dial the phone by saying any name stored in your

contact list, without ever having to record, or “train” that name.

VoiceSignal automatically voice-activates all your contacts, even if you

have hundreds of them stored on your phone. You can also dial any

telephone number, even if it is not stored in your contact list, by saying

Voice Command Tips:

Make sure you wait for the beep before speaking.

•

Speak clearly at a normal volume, as if you were talking on the phone.

Tools

Voice-Activating Your Contacts List

To change the way VoiceSignal uses choice lists:

ᮣ

At the Voice SVC sub-menu, select Voice Settings ➔

When you first start VoiceSignal, it reads your Contacts list and

voice-activates all the names stored there. When you have add or

change contacts, VoiceSignal automatically reloads and voice-

activates the entire list.

Choice Lists the following options appear in the display:

•

Automatic—VoiceSignal displays a choice list only when it is not

sure if it has correctly recognized the name or number.

Always On—VoiceSignal always displays a choice list, even when

there is only one choice.

Ending Calls Before Restarting the VoiceSignal Software

When you use VoiceSignal to make a call, you must end that call

before you can use VoiceSignal again.

Always Off—VoiceSignal never displays a choice list.

Select the preferred Choice List behavior.

Voice Settings

Choice Lists

Sensitivity

1. At the Voice SVC sub-menu, select Voice Settings ➔

VoiceSignal uses choice lists when it is not confident it has

correctly recognized a name or number. In this case, it can

display a list of up to three possible choices, and prompt you to

confirm the correct one.

Sensitivity. The Sensitivity screen appears in the display.

2. Use the Navigation key to adjust the selected Sensitivity

setting toward Reject More spoken commands or names

or toward Reject Less spoken commands or names.

You can change the way that VoiceSignal uses choice lists with

name dialing, digit dialing, and contacts. For each feature, you

can choose to always see a choice list (even if there is only one

choice), or never see a choice list (even if there are multiple

choices). If you leave the setting at “Automatic,” VoiceSignal

displays a choice list only when it is not confident it has correctly

recognized the name or number.

3. To accept the new setting, press

Digit Dialing

If you regularly have trouble with VoiceSignal not recognize the

numbers you say, try adapting digit dialing to your voice.

Adapting can improve the accuracy of digit recognition,

especially for people with strong regional accents.

Your phone displays the first digit sequence and “Please

say” plays through the speaker followed by the four digits

appearing in the display.

Note: After you adapt Digit Dial, your phone is customized to your voice, and

your voice only. Others will not be able to use it unless they reset the

Digit Dialing to factory defaults. (For more information, refer to “Reset

Digits” on page 101..)

2. Wait for the beep and say the digits using your normal tone

of voice. After a moment, the phone plays back the

recording and prompts “Did the recording sound ok?”

Adaptation involves recording several sequences of four digits

each. The recording process takes about a minute.

Tips for Adapting Digit Dialing

•

If the recording was good, say “Yes.”

If you need to re-record, say “No.”

•

Use Adapt Digits in a quiet place.

Make sure you wait for the beep before starting to speak.

Speak clearly, and say each digit distinctly.

If you say “No,” the phone prompts you to pronounce the

digits again. Wait for the beep and then say the digits.

If you make a mistake while recording a sequence of digits, or if there

is an unexpected noise that spoils the recording, re-record that

sequence.

Repeat this step until you’re satisfied with the recording.

3. After confirming that the recording sounds “ok”, continue

•

Only adapt digits if you are regularly having problems with digit dialing.

Once you adapt, digit dialing will not work as well for other people

using your phone. (You can always reset digit adaptation to its original

state, as described below.)

the recording process with the next set of digits.

4. After six sets of digits, the phone asks whether you want to

do more adaptation. Answer “Yes.”

Adapt Digits

5. Repeat steps 4 and 5 for another six sets of digits. After

the second group of six sets of digits, “Adaptation

complete” plays through the speaker and you are returned

to the Adapt Digits menu.

To adapt digit dialing, do the following:

1. At the Voice SVC sub-menu, select Voice Settings ➔

Digit Dialing ➔ Adapt Digits.

Tools

100

Reset Digits

1. At the Voice SVC sub-menu, select Voice Settings ➔

Voice Launch. The following options appear in the display:

To reset digit dialing to factory default settings, do the following:

1. At the Voice SVC sub-menu, select Voice Settings ➔

Digit Dialing ➔ Reset Digits.

•

Key Only — Press and hold

call.

to activate VoiceSignal for one

•

Key/Ear Mic — Attach a headset to your phone. Press and hold

to activate VoiceSignal. Now, you can make and end calls

using VoiceSignal by pushing the button on the headset.

The phone prompts you to confirm digit reset.

2. To reset your digit adaptation, press the OK soft key. To

• Key/Flip — Press the

key to activate VoiceSignal for repeated

cancel, press the Back soft key.

calls. Open and close the flip to make and end calls using

VoiceSignal. Press to release VoiceSignal.

Sound

2. Select the Voice Launch option you want.

Sound lets you specify what (if any) text prompts you want your

phone to read to you through the earpiece.

About VoiceSignal

This option causes the About VoiceSignal screen to appear in

the display, showing version and build information about the

VoiceSignal software included on your phone.

1. At the Voice SVC sub-menu, select Voice Settings ➔

Sound. The following options appear in the display:

•

Prompts — Enables (On) or disables (Off) playing of prompts.

Digits — Enables (On) or disables (Off) playing of digits.

Names — Enables (On) or disables (Off) playing of names.

Name Settings — Lets you adjust the speed and volume of your

phone’s audio name playback.

1. At the Voice SVC sub-menu, select Voice Settings ➔

About.

The About VoiceSignal screen appears in the display

showing the version level of the VoiceSignal software

currently installed on your phone.

2. Select the desired option and setting.

Voice Launch

To set the key or action that launches VoiceSignal, do the

following:

101

Enter text changes using the keypad. (For more

Memo Pad

information, refer to “Entering Text” on page 35.)

You can create a notes and store them in Memo Pad. You can’t

prioritize or set an alert for stored notes. Return to Memo Pad

anytime you wish to review and edit your notes.

5. To erase the memo you are viewing, press the Options soft

key, then select Erase. You are prompted to verify the

erasure.

Add a Memo

1. At the Tools menu, select Memo Pad. If you have any

stored memos, they appear as a list in the display. If this is

your first time in Memo Pad, “No memos” appears in the

display.

•

To erase the memo, press the Yes soft key.

To keep the memo, press the No soft key.

Alarm Clock

Your phone has an alarm clock that can be set to go off once, or

daily at a specified time. Once set, the alarm clock is easy to

change or turn off completely.

2. To add a new memo, press the Add soft key.

3. Enter memo text using the keypad. (For more information,