CD Stereo System
Operating Instructions
Model No.
SC-PM9
Note:
“EB” on the packaging indicates the United Kingdom.
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference.
Table of contents
Before use
Safety precautions ..................................
Supplied accessories .............................
Caution for AC Mains Lead ....................
The remote control..................................
Placement of speakers ...........................
Connections ............................................
Front panel controls ...............................
Demo function .........................................
Setting the time .......................................
Convenient functions .............................
2
3
3
4
4
4
6
7
7
7
Listening operations
The radio: manual tuning .......................
The radio: preset tuning .........................
8
9
CDs ........................................................... 10
Enjoying MP3 .......................................... 13
Cassette tapes ......................................... 16
Recording operations
Before recording ..................................... 17
Recording the radio ................................ 17
Recording CDs ........................................ 17
Timers and others
Sound Quality .......................................... 19
Enhancing the sound quality ................. 19
Listening with headphones.................... 19
Auto-off function ..................................... 19
Using the timers ...................................... 20
Reference
Technical specifications ......................... 22
Maintenance ............................................ 22
Troubleshooting guide .............. Back cover
E EB GN GCS
RQT7360-2B
Caution for AC Mains Lead
Supplied accessories
(For United Kingdom)
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses
when asking for replacement parts.
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to
BS1362.
AC mains lead ............................................. 1 pc.
For the United For Australia
For others
(K2CQ2CA00002)
Kingdom
and N.Z.
(VJA0733)
(K2CJ2DA00010)
Check for theASTAmark m or the BSI mark o on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
AM loop antenna ......................................... 1 pc.
(N1DAAAA00001)
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD
BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF
SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF
THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE
SOCKET.
FM indoor antenna...................................... 1 pc.
(RSA0007-L)
If a new plug is to be fitted please observe the wiring code as stated
below.
If in any doubt please consult a qualified electrician.
Remote control transmitter........................ 1 pc.
(EUR7711140)
IMPORTANT
The wires in this mains lead are coloured in accordance with the following
code:
Blue: Neutral, Brown: Live.
Be
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal
which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH
TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE
EARTH SYMBOL n OR COLOURED GREEN OR GREEN/YELLOW.
Remote control batteries ......................... 2 pcs.
Antenna plug adaptor . . . . . . . . . . . . . . . . . 1 pc.
For the United Kingdom only (K1YZ02000013)
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
For the United Kingdom and Republic of Ireland
The location of the fuse differ according to the type of AC mains plug
(figures A and B). Confirm the AC mains plug fitted and follow the
instructions below.
shop@
Illustrations may differ from actual AC mains plug.
• Order accessory and consumable items for your product with
ease and confidence by telephoning our Customer Care
Centre Mon–Friday 9:00 am–5:30 pm.
(Excluding public holidays.)
• Or go on line through our Internet Accessory ordering
application.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
• It couldn’t be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
2. Replace the fuse and close or attach the fuse cover.
This Technical Support Hot Line number is for Panasonic
PC software related products only.
For Republic of Ireland, please use the Customer Care
Centre number listed above for all enquiries.
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
For all other product related enquiries, please use the
Customer Care Centre numbers listed above.
3
RQT7360
A The remote control
IBatteries
• Insert so the poles (+ and –) match those in the remote control.
• Do not use rechargeable type batteries.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
R6, AA, UM-3
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
IUse
Aim at the remote control sensor, avoiding obstacles, at a max-
imum range of 7 m (23 feet) directly in front of the unit.
Refer to page 6 for the remote control sensor position.
B Placement of speakers
Speakers are designed identically so that no left or right chan-
nel orientation is necessary.
Notes
• Keep your speakers at least 10 mm away from the system for proper
ventilation.
• These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily
influenced by magnetism.
Be
• To avoid damage to the speakers, do not touch the speaker cones
if you have taken the nets off.
C Connections
Plug the AC mains lead into a household mains socket only
after all other connections have been made.
• To prepare theAM loop antenna wire and speaker cords, twist
the vinyl cover tip and pull off.
2
1
(L)
(R)
4
3
1 Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position where
radio signals are received with the least amount of interfer-
ence.
To household
mains socket
Note
For the best reception:
An FM outdoor antenna is recommended. (\ page 5)
1
Adhesive
tape
AM ANT
EXT
LOOP
FM indoor
antenna
FM ANT
75
4
(Continued on next page)
RQT7360
Connections
2
3
2 Connect the AM loop antenna.
AM loop antenna
After attaching the antenna, turn on the system and tune in
a broadcast station. Put the antenna where the reception
is best and interference is minimal.
3 Connect the speaker cables.
Connect the speaker cords without tags to the black
terminals, so (+) and (–) are correct.
Connect the speaker cords with red tags to the red
terminals, so (+) and (–) are correct.
Never allow the exposed wires to contact each other when
connected.
AM ANT
EXT
LOOP
1
2
Incorrect connection can damage the unit.
FM ANT
75
Caution
Use only the supplied speakers.
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
Caution
• Use the speakers only with the recommended
system.
Red (
)
1
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has
occurred or if you experience a sudden change in
performance.
Black (
)
2
Red tag
3
Copper
(
)
L
R
• Do not attach these speakers to walls or ceilings.
Silver (
)
4 Connect the AC mains lead.
Black (
)
Red (
)
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON
PAGE 3 BEFORE CONNECTION.
Insertion of Connector
Be
Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing.
FM outdoor antenna
(not included)
However there is no problem using the unit.
Connector
Appliance inlet
AM ANT
EXT
75 coaxial cable
(not included)
LOOP
FM ANT
75
Approx. 3.5 mm
(Only for the U.K.)
Note
Use the antenna
plug adaptor
(included).
The included AC mains lead is for use with this unit only. Do
not use it with other equipment.
Optional antenna connections
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.
AM outdoor antenna
(not included)
A FM outdoor antenna
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
5-12m
AM ANT
Note
EXT
LOOP
An outdoor antenna should be installed by a qualified technician
only.
FM ANT
75
B AM outdoor antenna
Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally along
a window or other convenient location.
Note
When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lightning.
Never use an outdoor antenna during a lightning storm.
5
RQT7360
Front panel controls
Top of the unit
PHONES
1
A Main unit
Headphone jack (PHONES).................................... 19
Cassette lid
Cassette deck open button (OPEN 0) .................. 16
Display
Remote control signal sensor
Album or .......................................................... 13
Tuner/band select button (TUNER/BAND) .............. 8
2
OPEN
AC supply indicator (AC IN)
3
This indicator lights when the unit is connected to the AC
mains supply.
Standby/on switch (y¥I)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Stop, demonstration button
(STOP 7, –DEMO) ..................................................... 7
Surround button (SURROUND) ............................. 19
Sound button (SOUND) .......................................... 19
Track 4 or ¢ ..................................................... 13
Recording start/pause button (¶/8 REC) ............. 18
CD play/pause button (CD 3/8) ............................ 10
Volume control (VOLUME DOWN, UP).................... 8
Cassette play button (TAPE 3) ............................. 16
CD tray open/close button (0 OPEN/CLOSE) ...... 10
4
5
6
$
%
7
8
9
&
(
CD skip/search, tape fast-forward/rewind, tune/preset
channel select, time adjust buttons
(4/REW/4, 3/FF/¢) ............................................. 7
)
~
+
!
"
#
Be
CD tray
,
B Remote Control
Buttons such as
function in exactly same way as the but-
tons on the main unit.
Sleep timer, auto off button
(SLEEP, –AUTO OFF).............................................. 21
CD program/clear, tuner preset button
(PROGRAM, –CLEAR) .............................................. 9
Play mode select button
[
9
SLEEP
CLOCK/
PLAY/
–AUTO OFF TIMER
REC
(PLAY MODE) ............................................................ 8
Use this for selecting CD play mode, tune mode, FM mode.
PROGRAM
ABC
DEF
-
.
–CLEAR
Repeat button (REPEAT) .........................................11
Display button (DISPLAY) ........................................ 8
Delete button (DEL) ................................................ 12
Stop button (STOP 7).............................................. 11
Intro button (INTRO) ............................................... 14
Marker memory/recall button (MARKER) ............. 15
Muting button (MUTING) .......................................... 7
1
2
3
GHI
JKL
MNO
\
]
PLAY MODE
REPEAT
4
PQRS
7
5
TUV
8
6
WXYZ
9
/
:
SPACE
10
DISPLAY
DEL
0
;
<
CD
&
)
TUNER/
BAND
TAPE
Play timer/recording timer button
(˚PLAY/REC) .......................................................... 20
7
STOP
=
Clock/timer button (CLOCK/TIMER)........................ 7
Numeric, character buttons
(h10, 1-9, 0, A-Z, SPACE!”#) ..................................... 9
(
VOL
VOL
ALBUM
CURSOR
/REW
/FF
Enter button (ENTER) ............................................. 14
Title search select button
(TITLE SEARCH) ..................................................... 14
Dimmer button (DIMMER) ........................................ 7
+
^
_
{
TITLE
6
>
?
INTRO MARKER
ENTER
SEARCH
MUTING
SOUND SURROUND DIMMER
@
#
"
6
RQT7360
1 Press [y] to turn the unit on.
A Demo function
When the unit is first plugged in, a demonstration of its func-
tions may be shown on the display.
If the demo setting is off, you can show a demonstration by
selecting “DEMO ON”.
Press and hold [STOP 7, –DEMO].
The display changes each time the button is held down.
DEMO OFF
DEMO ON
STOP
7
While in the standby mode, select “DEMO OFF” to reduce power
consumption.
B Setting the time
This is a 24-hour clock.
The example shows how to set the clock for 18:30 (6:30 pm).
1
2 4
2 Press [CLOCK/TIMER] to display “CLOCK”.
Every time you press the button:
CLOCK
PLAY
REC
Original display
3 Within 5 seconds
3
Press [4/REW/4] or [3/FF/¢] to set the time.
Press and hold to change the time faster.
4 Press [CLOCK/TIMER].
1
2
The time is set and the original display is restored.
To show the time (when the unit is ON)
Press [CLOCK/TIMER].
The clock is shown for about 5 seconds.
CLOCK/
TIMER
Be
Note
The clock may lose or gain some time over a period.
Readjust if necessary.
C Convenient functions
To dim the display panel
Use this when you are going to sleep or any other time you
would prefer the panel to be dimmer.
/REW
/FF
3
4
Press [DIMMER].
The display panel dims except for the [AC IN] indicator.
To cancel
Press [DIMMER] again.
CLOCK/
TIMER
To mute the volume
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
“MUTING” appears.
To cancel
Press [MUTING] again. (“MUTING” goes out.)
Muting can also be cancelled by lowering the volume all the
way to (-- dB).
When the system is turned off, the muting operation will be
automatically cancelled.
MUTING
DIMMER
7
RQT7360
The radio: manual tuning
1 Press [TUNER/BAND] to select “FM” or “AM”.
The unit comes on automatically.
Every time you press the button:
FM
AM
1
3
2
4
2 Press [PLAY MODE] on the remote control to se-
lect the manual tuning mode.
MANUAL PRESET
3 Press [4/REW/4] or [3/FF/¢] to select the fre-
quency of the required station.
“TUNED” is displayed when a radio station is tuned.
TUNER BAND
1
“
ST ” is displayed when a stereo FM broadcast is being
received.
4 Adjust the volume.
PLAY MODE
Auto tuning
2
3
4
Press and hold [4/REW/4] or [3/FF/¢] for a moment until
the frequency starts changing rapidly. The unit begins auto tun-
ing, stopping when it finds a station.
• Auto tuning may not function when there is excessive
interference.
REW
FF
• To cancel auto tuning, press [4/REW/4] or [3/FF/¢] once
again.
A If noise is excessive in FM
Press and hold [PLAY MODE] to display “MONO”.
This mode improves sound quality if reception is weak, but
broadcasts will be heard in monaural.
Press and hold [PLAY MODE] again to cancel the mode.
“MONO” goes out. MONO is also cancelled if the frequency is
changed.
Turn off “MONO” for normal listening. Stereo and monaural
broadcasts are automatically played as they are received.
B RDS broadcasting (For Europe)
This unit can display the text data transmitted by the radio data
system (RDS) available in some areas.
If the station you are listening to is transmitting RDS signals,
“RDS” will light up on the display.
Displaying the name of a broadcasting station or a program
type
Press [DISPLAY].
Every time you press the button:
PLAY
MODE
Frequency display
Station Name (PS)
Program type (PTY)
L
Program type displays
FINANCE
CHILDREN
SOCIAL A
RELIGION
PHONE IN
TRAVEL
NEWS
AFFAIRS
INFO
VARIED
POP M
ROCK M
M.O.R M
LIGHT M
CLASSICS
OTHER M
WEATHER
COUNTRY
NATIONAL
OLDIES
FOLK M
DOCUMENT
TEST
❈
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
DISPLAY
LEISURE
JAZZ
ALARM
RDS
Notes
RDS
RDS
PS
• RDS displays may not be available if reception is poor.
❈
“M.O.R M”=“Middle of the road music”
• Sound is momentarily interrupted if you load/unload tapes while
listening to an AM broadcast.
PTY
8
RQT7360
The radio: preset tuning
PROGRAM
– CLEAR
There are two methods of presetting stations.
Automatic presetting: Stations the tuner can receive are pre-
set automatically.
Manual presetting:
You can select the stations to preset
and the order they are preset in.
TUNER/
BAND
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/BAND] to select “FM” or “AM”.
2
A Automatic presetting
3
1
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where presetting is to begin (\ page 8).
Press and hold [PROGRAM, –CLEAR].
The tuner presets stations it can receive into the channels in
ascending order. When finished, the last station memorized is
tuned in.
/REW
/FF
1
2
3
B Manual presetting
Preset the stations one at a time.
1 Press [4/REW/4] or [3/FF/¢] to tune to the
PROGRAM
required station.
–CLEAR
2 Press [PROGRAM, –CLEAR].
3 Press numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.
ABC
DEF
1
2
3
GHI
JKL
MNO
C Selecting channels
4
PQRS
7
5
TUV
8
6
WXYZ
9
1 Press numeric buttons to select the channel.
For channels 1 to 9 press the corresponding number.
For channels 10 to 15 press [h10], then the two digits.
SPACE
10
0
OR
Press [PLAY MODE] to select “PRESET”.
Press [4/REW/4] or [3/FF/¢] to select the
channel.
2 Adjust the volume.
AM allocation setting
1
Each country allocates broadcast bands according to their par-
ticular needs.
2
This system can also receive AM broadcasts allocated in 10
kHz steps.
To change the step (9kHz ↔ 10kHz)
L
Preparation:
ABC
DEF
/REW
/FF
PLAY MODE
Press [TUNER/BAND] to select “FM”.
Press and hold [TUNER/BAND].
1
2
3
1
2
or
GHI
JKL
MNO
4
PQRS
7
5
TUV
8
6
WXYZ
9
After a few seconds the display changes to a flashing display
of the current minimum frequency.
Continue to hold [TUNER/BAND] down.
When the minimum frequency changes, release the button.
To return to the original step, repeat the above steps.
SPACE
10
0
Note
After changing the “allocation” setting, the frequencies you previously
preset in the memory will be cleared.
VOL
VOL
9
RQT7360
CDs
This unit can play CD-DA (digital audio) format audio CD-R
and CD-RW that have been finalized (a process performed af-
ter recording that enables this unit to play audio CD-R and CD-
RW).
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
3
1 Press [
y
/I] to turn the unit on.
4
2
1
2 Press [0 OPEN/CLOSE] to load a CD, then press
[0 OPEN/CLOSE] again.
/
/
REW
FF
/
,
/
3 Press [CD 3/8] to start play.
4 Adjust the volume.
To
Action
Label must face upward.
stop the disc
pause play
Press [STOP 7].
Press [CD 3/8]. Press again to
resume play.
skip tracks
Press [4/REW/4] or [3/FF/¢].
search through
tracks
Press and hold [4/REW/4] or [3/
FF/¢] during play or pause.
Disc tray
start one touch play
Press [CD 3/8] when the CD is
loaded but the unit is off.
remove a CD
Press [0 OPEN/CLOSE].
1
Note
• During random play, you cannot skip to tracks which have already
been played.
• During program play (\ page 12), or random play, search can be
done within the track in play only.
• During program play, skipping is always in the programmed order,
whether forward or backward.
OPEN/
CLOSE
2
3
4
• Program play cannot be used in combination with random play.
A CD selection and care
CD
3/8
With this system, you can only play CDs having this mark. (
)
Do not;
• use irregularly shaped CDs. (
)
• attach extra labels and stickers.
• use discs with labels and stickers that are coming off or with
adhesive exuding from under labels and stickers. (
)
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids. (Wipe with a soft, dry cloth.)
• use CDs printed with label printer available on the market.
L
a
b
c
10
RQT7360
CDs
A CD Play Mode function
2
3
1
Mode
To play
1-TRACK
RANDOM
one selected track on the disc.
a disc in random order.
1 Press [CD 3/8] and then [STOP 7].
2 Press [PLAY MODE] to select your desired mode.
1-TRACK
RANDOM
Original display
3 • When “1-TRACK” is selected in step 2
Select the track with the numeric buttons to
start play.
CD
STOP
7
1
2
©
To select track 10 or over, press [h10] then the two digits.
• When “RANDOM” is selected in step 2
Press [CD 3/8] to play CD.
To stop play
Press [STOP 7].
PLAY MODE
When playback ends
The current play mode will be retained.
Note
• You can use the CD Play Mode function together with repeat play.
• During RANDOM play, you cannot skip to tracks which have already
been played.
• During RANDOM play, you can search forward or backward only
within the current track.
ABC
DEF
B Direct access play
1
2
3
CD
3
or
GHI
JKL
MNO
4
PQRS
7
5
TUV
8
6
WXYZ
9
Direct access allows you to start normal play from a specific
track to the last track on the CD.
SPACE
10
Press the numeric button(s) to select and play your
desired track number.
0
To select a two-digit track
Press [h10] and then the two numbers you want.
Note
You cannot use direct access play with RANDOM mode.
C Repeat play
Numeric
buttons
Press [REPEAT] before or during play.
“REPEAT ON” and “ ” are displayed.
L
To cancel repeat play
Press [REPEAT] once again. “REPEAT OFF” is displayed and
“
” is cleared.
To repeat your favourite tracks
1.Program the tracks you want (perform steps 1 ~ 5 on page
12.)
2.Press [REPEAT] and make sure “REPEAT ON” and “ ” are
displayed.
3.Press [CD 3/8]. Playback will start.
REPEAT
To use repeat play with CD Play Mode function
Set the desired mode, press [REPEAT] before or during play-
back, and make sure “REPEAT ON” and “ ” are displayed.
11
RQT7360
CDs
A CD display
This function allows you to display the remaining play time of
the current track.
DISPLAY
During play or pause mode
Press [DISPLAY].
Every time you press the button:
Elapsed play time ↔ Remaining play time
B Program play
This function allows you to program up to 24 tracks.
1 Press [CD 3/8] and then [STOP 7].
2
(In the stop mode)
Press [PROGRAM, –CLEAR].
2
3 Press numeric buttons to select the desired track.
4 Repeat step 3 to program other tracks.
3 4
DEL
5
1
5 Press [CD 3/8].
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks
have been played.
4 /REW/ 4,
3 /FF/ ¢
To
Action
cancel program
play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in
memory.
clear the last track
Press [DEL] in the stop mode.
clear all
programmed tracks
Press and hold [PROGRAM/–
CLEAR] in the stop mode until “PGM
CLEAR” is displayed.
CD
STOP
7
1
2
©
select a two-digit
track
Press [h10] and then the two numbers
you want.
PROGRAM
–CLEAR
When “PGM FULL” appears
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
Check program contents
Check to see if “
4] or [3/FF/¢].
ABC
DEF
PGM
” is displayed, then press either [4/REW/
1
2
3
3
5
GHI
JKL
MNO
Every time you press one of the buttons, the track and pro-
gram number are shown on the display.
4
PQRS
7
5
TUV
8
6
WXYZ
9
Add to the program
In the stop mode, repeat step 3.
SPACE
10
0
Note
• During program play, you can search forward or backward only within
the current track.
L
• During program play, skipping is always in the programmed order,
whether forward or backward.
CD
Memory retention
Your program is retained in memory for about 2 weeks while
the system is unplugged.
12
RQT7360
Enjoying MP3
This unit can play MP3 files recorded on CD-R/RW.
Files are treated as tracks and folders are treated as albums.
This unit can access up to 999 tracks, 400 albums and 20 ses-
sions.
ALBUM
(
,
)
ALBUM
,
TRACK
4
,
¢
When making MP3 files to play on this unit
CD
6
CD
6
Disc format
Discs must conform to ISO9660 level 1 or 2 (except for ex-
tended formats).
File format
4 /REW/ 4,
3 /FF/ ¢
MP3 files must have the extension “.MP3” or “.mp3”.
To play in a certain order
Prefix the folder and file names with 3-digits numbers in the
order you want to play them.
ALBUM
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomsom multimedia.
Limitations on MP3 play
• This unit is not compatible with packet-write format.
• When both MP3 and CD-DA data is recorded on the disc
over a number of sessions:
• If the first session contains MP3 recordings, the unit will
play from the MP3 made in that session till the session
before the first CD-DA recordings.
• If the first session contains CD-DA recordings, the unit will
play only the recordings made in that session. The
subsequent sessions will be ignored.
or
CURSOR
CURSOR
/REW
/FF
• During program play, you cannot search forward or backward
within the track.
• Some MP3 may not be played due to the condition of the
disc or recording.
• Recordings will not necessarily be played in the order you
recorded them.
“
” : Indicates the disc contains MP3 files
MP3
A Album skip play
2
2
During play or stop
Press [ALBUM, or ] to select the desired album.
When selecting in the stop mode:
Press [CD 3/8] to start play.
1
B Track skip play
During play or stop
ALBUM
Press [TRACK, 4 or ¢] to select a desired track.
1
2
(You can also press [4/REW/4] or [3/FF/¢].)
When selecting in the stop mode:
Press [CD 3/8] to start play.
L
Note
During 1-ALBUM mode, track skipping can only be done within the
current album.
C Starting play from a desired track
1 Press [ALBUM, or ] to select the album.
or
2 Press [TRACK, 4 or ¢] or numeric buttons
to select your desired track.
ABC
DEF
1
2
3
Note
GHI
JKL
MNO
• For two digits number, press [h10] once then the two digits.
• For three digits number, press [h10] twice then the three digits.
4
PQRS
7
5
TUV
8
6
WXYZ
9
SPACE
10
Program play for MP3
0
13
Please refer to page 12 for program play.
RQT7360
Enjoying MP3
2
STOP 7
A INTRO function (Album scan)
You can find an album by listening to the first track of all
albums in the current disc for 10 seconds each.
1
Preparation: Press [CD 3/8] and then [STOP 7].
INTRO
1
2
1
2
Press [INTRO].
INTRO function starts.
(INTRO function is cancelled after playing the first track in
the last album on the current disc.)
While your desired album is playing, press [CD 3/8].
Play starts from the first track of the album.
CD
To stop during the process, press [INTRO] or [STOP 7].
B CD Play Mode function for MP3
1 Press [PLAY MODE] to select:
1
2
1-TRACK
1-ALBUM
RANDOM
Original display
Mode
To
STOP 7
1-TRACK
1-ALBUM
RANDOM
play one selected track on the disc.
play one selected album on the disc.
play the disc in random order.
2 • When “1-TRACK” is selected in step 1
Press the numeric buttons to select your desired track
in the CD.
PLAY MODE
1
•
When “1-ALBUM” is selected in step 1
Press [ALBUM ( or )] to select your desired album.
ABC
DEF
ALBUM
ALBUM
1
2
3
2
Press [CD 3/8] to start play.
Play starts from the first track of the selected album.
GHI
JKL
MNO
4
PQRS
7
5
TUV
8
6
WXYZ
9
or
SPACE
10
To stop play
0
Press [STOP 7].
When playback ends
The current play mode will be retained in memory until it is
changed even if the unit is turned off.
CD
When “NOT MP3/ERROR E2” or “NOT MP3/ERROR E4”
appears on the display
An unsupported MP3 format is being played. The unit will skip
that track and play the next one.
4
Note
STOP 7
• You can use repeat mode (\ page 11) with CD Play Mode function.
• You cannot use program mode together with CD Play Mode function.
3 /FF/ ¢
1
3
C Album/Track title search
TITLE
Preparation: Press [CD 3/8] and then [STOP 7].
SEARCH
L
1
3
1
2
3
For album title search, press [TITLE SEARCH] once.
For track title search, press [TITLE SEARCH] twice.
Enter the album or track title keyword.
(\ page 15)
ENTER
Press [ENTER].
Press [3/FF/¢] to display the next title search result.
“NOT FOUND” is displayed when there is no match.
4
Press [CD 3/8] to start play from the album/track found.
To cancel partway through
Press [STOP 7].
CD
4
14
RQT7360
Enjoying MP3
A Entering characters
Numeric
buttons
You can enter keyword of up to 9 characters for album/track
title search.
Press the numeric button to select the required character.
Characters allocated to the numbered buttons:
4 /REW/ 4,
3 /FF/ ¢
Numbered Characters
buttons
Numbered Characters
buttons
1
2
3
4
5
1
6
7
8
9
0
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
0
A B C 2
D E F 3
G H I 4
J K L 5
1
h10
space !”#$ %&’()∗+,– ./:;=?_8
The characters change each time a numbered button is pressed.
To enter, press [3/FF/¢].
Editing keywords
To move the cursor
CURSOR
/REW
/FF
Press [4/REW/4] or [3/FF/¢] to revise any characters.
To delete, move the cursor over the character and press [DEL].
MARKER
2
B Marking a track
ABC
DEF
1
2
1
2
3
You can mark one track on the disc loaded so that you can
start play from them later.
GHI
JKL
MNO
4
PQRS
7
5
TUV
8
6
WXYZ
9
To mark a track number
SPACE
10
0
1
During play or stop
Select your desired track with the numeric buttons.
For two digits number, press [h10] once then the two digits.
For three digits number, press [h10] twice then the three digits.
MARKER
2
Hold down [MARKER] until “STORING” blinks on the
display.
The selected track is stored in the marker of the current disc. The
previous track will be replaced.
To recall a marked track number in the disc
During play or stop
Press [MARKER] to recall a marker.
Play start from the track recalled.
DISPLAY
Note
• “NO MARKER” indicates that the marker in the current disc is empty.
• The marker memory is cleared when you open the CD tray.
• You cannot use this function during Random play/program mode.
a
f
e
b
c
d
L
C CD display for MP3
During play or pause
Press [DISPLAY] to select your desired CD display.
a
b
c
d
e
f
Note
• When a title is longer than 9 characters, it will scroll across the
display.
• “NO ID3” is displayed if titles with ID3 tags haven’t been entered.
• Maximum number of displayable characters:
Album/track title: 32
ID3 album/title/artist name: 32
(ID3 is a tag embedded in MP3 track to provide information about
the track.)
• This unit can display album and track titles with ID3 tags (version
1.0 and 1.1). Titles containing text data that the unit doesn’t support
cannot be displayed.
15
RQT7360
Top of the unit
Cassette tapes
1 Press [OPEN 0] to insert a cassette with the tape
facing in.
When the button is pressed, the unit comes on
automatically. Make sure the cassette is fully inserted and
close the lid by hand.
2 Press [TAPE 3] to start playback.
One side is played, then playback stops automatically. To
play on the other side of the cassette, turn the cassette
over and press [TAPE 3].
1
3 Adjust the volume.
To
Action
stop tape playback
start one touch play
Press [STOP 7].
Press [TAPE 3] when the system is
OFF with the cassette loaded.
fast-forward and
rewind
Press [4/REW/4] or [3/FF/¢] in
the stop mode.
Cassette tape selection and care
3
2
Types of cassettes which can be played correctly
Use normal position tapes.
High position and metal position tapes can be played, but the
unit will not be able to do full justice to the characteristics of
these cassettes.
STOP
REW
/
/
,
/
FF/
• Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
• Tape slack can get caught up in the mechanism and should
be wound up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts
if used incorrectly.
OPEN
1
B
OP
EN
To find the beginning of a program
(TPS: Tape Program Sensor)
Insert inside the
guides
TPS finds the beginning of a track and resumes play from there.
Each press increases the number of tracks skipped, up to a
maximum of 9.
Forward side
Press [4/REW/4] or [3/FF/¢] during play.
TAPE
2
3
Notes
The TPS function searches for silent parts of about 4 seconds in length
which are normally found between tunes.As a result, it may not function
properly in the following cases:
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes
L
16
RQT7360
Before recording
1
3
Types of tapes which can be recorded correctly
Use normal position tapes.
High position and metal position tapes can be used, but the
unit will not be able to record or erase them correctly.
The effect of volume and sound quality on recording
These have no effect on recording.
They can be changed for playback.
STOP
,
–DEMO
A Recording the radio
Preparation:
• Wind up the leader tape.
• To record from halfway through the tape
OPEN
1WiInndsteherttatpheeucpatoswsheetrteeytoou bwaenrtetocsotarrdt eredcoordnin.g.
1
3
OPEN
2 Tune to the required station.
(\ page 8 or 9)
3 Press [¶/8 REC] to start recording.
Insert inside the
guides
To
Action
stop recording
Press [STOP 7, –DEMO].
Forward side
stop recording
temporarily
Press [¶/8 REC].
Press again to resume recording.
REC
Recording CDs
B Normal recording
1
• Tracks are recorded in the order in which they are found on the CD.
• Tracks are cut in the middle when the end of the tape is reached.
• You can record from any point on the tape.
1 Insert the cassette to be recorded on.
2 Press [CD 3/8] and then [STOP 7].
4
3
3 Press [OPEN/CLOSE 0] to open the CD tray.
Insert the CD with label facing upward.
2
Press [OPEN/CLOSE 0] to close the CD tray.
4 Press [¶/8 REC] to start recording.
The recording will start from the first track.
To
Action
stop recording
Press [STOP 7, –DEMO].
stop recording
temporarily
Press [¶/8 REC].
Press again to resume recording.
OPEN
1
CD
3/
8
STOP
7
2
3
©
R
OPEN/
CLOSE
REC
4
17
RQT7360
Recording CDs
Preparation:
• Tracks are recorded in the order in which they are found on the CD.
• Tracks are cut in the middle when the end of the tape is reached.
• You can record from any point on the tape.
ALBUM
(
,
)
3
A To record specific CDs/tracks
2
1
1 Press [CD 3/8] and then [STOP 7].
2 Press [PLAY MODE] to select your desired mode.
1-TRACK
1-ALBUM (MP3)
Original display
RANDOM
4 /REW/ 4,
3 /FF/ ¢
4 /REW/ 4,
3 /FF/ ¢
Mode
To
1-TRACK
1-ALBUM
record one selected track on the disc.
record one selected album on the
disc.
CD
3
/
8
STOP
7
1
2
©
RANDOM
record the disc in random order.
For 1-TRACK mode
Press [4/REW/4] or [3/FF/¢] to select the track.
PLAY MODE
For 1-ALBUM mode (MP3)
Press [ALBUM ( or )] to select the album.
3 Press [¶/8 REC] to start recording.
REC
3
To
Action
stop recording
Press [STOP 7, –DEMO].
stop recording
temporarily
Press [¶/8 REC].
If the tape finishes before the CD,
press [STOP 7, –DEMO] to stop the
CD.
Press [¶/8 REC] to resume
recording.
To record programmed tracks
This function allows you to record up to 24 programmed tracks.
1 Programme the track(s) you want.
(\ steps 1 - 4 on page 12)
2 Press [¶/8 REC] to start recording.
Side A
B Erasure prevention
The illustration shows how to remove the tabs to prevent re-
cording. To record on the tape again, cover as shown.
Tab for side B
Tab for side A
To re-record
Normal tape
To erase a recorded sound
Insert the cassette to be recorded on (\ page 17).
Press [TAPE] and then [STOP 7].
Press [¶/8 REC].
Adhesive tape
Your attention is drawn to the fact that recording pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Re
18
RQT7360
Sound Quality
SLEEP
–AUTO OFF
Using the built-in sound quality settings
You can choose one of four types of sound quality with Preset
EQ or enhances the bass and treble effect of the sound with
Manual EQ.
VOL –,
+ VOL
A Preset EQ
1 Press and hold [SOUND] to select “PRESET EQ”.
2 Press [SOUND] to select a setting.
SOUND
SURROUND
B Manual EQ
1 Press and hold [SOUND] to select “MANUAL EQ”.
2 Press [SOUND] to select a setting.
SOUND
SOUND
1
2
3 Press [VOL –] or [+ VOL] to adjust to the desired
level.
The tone level can be varied within a range of -5 to +5.
Note
Changes to sound quality do not affect recordings.
Enhancing the sound quality
C Using the “live” effect (SURROUND)
The surround sound leaves middle-range sounds such as
vocals clear and gives natural width and depth to music.
Surround sound is effective with stereo sound.
Press [SURROUND] to display “
”.
To cancel
Press [SURROUND] to clear the “
” indicator.
• When listening through headphones, the effect is less
discernible than through the unit’s speakers.
• If interference in FM stereo reception increases, cancel the
surround sound effect.
SOUND
SOUND
1
2
D Listening with headphones
Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm stereo.
Note
VOL
VOL
3
Avoid listening for prolonged periods of time to prevent hearing damage.
SURROUND
E Auto-off function
To save power, the unit turns off if it is left unused for 10 minutes.
This function works only if CD or tape is selected as the source.
Note
This function does not work if the source is tuner.
Press and hold [AUTO OFF].
“AUTO OFF” is shown on the display.
To cancel
i
Press and hold [AUTO OFF] again to clear “AUTO OFF” from the
display.
T
For your reference
The setting is maintained even if the unit is turned off. When the unit
is turned on again, “AUTO OFF” is displayed and the unit functions as
described above.
SLEEP
–AUTO OFF
“AUTO OFF” disappears from the display if tuner is selected as the
source but continues to function normally.
19
“AUTO OFF” remains displayed if CD or tape is selected as the source. RQT7360
˚
˚
PLAY
REC
set the play timer.
set the record timer.
resume original display.
˚
PLAY ON
˚
REC ON
˚
PLAY OFF
˚
REC OFF
˚
˚
˚
PLAY
REC
turn on the play timer.
turn on the record timer.
turn off.
5 Press [
y
] to turn the unit off.
Using the timers
4
5
2
2
1 2 3
Using the play/record timer
The timer has two functions. It can be set to on at a certain
time to wake you up, or it can be set to record the radio.
The play timer cannot be used in combination with the record
timer.
Preparations:
• Turn the unit on and set the clock (\ page 7).
• For the play timer, prepare the music source you want to
listen to; cassette, CD or radio, and set the volume.
• For the record timer, check the cassette’s erasure prevention
tabs (\ page 18), insert the tape and tune to the radio station
(\ page 8, 9).
1
1
2 3
1 Press [CLOCK/TIMER] to select the timer func-
CLOCK/
TIMER
tion:
1
Every time you press the button:
CLOCK
PLAY
REC
Original display
For Play Timer
For Record Timer
Timer
To
CLOCK
set the clock.
/REW
/FF
original display
2
Setting the start and finish times
(Within 3 seconds)
2
Press [4/REW/4] or [3/FF/¢] to select the
starting time.
Press [CLOCK/TIMER].
CLOCK/
TIMER
3
Press [4/REW/4] or [3/FF/¢] to select the
finishing time.
Press [CLOCK /TIMER].
The start and finish times are now set.
/REW
/FF
3
Turning the timer on
4 Press [ PLAY/REC].
Every time you press the button:
PLAY
REC
no display (off)
Timer
To
CLOCK/
TIMER
no display
PLAY/
REC
4
The unit must be off for the timers to operate.
• For play timer
The timer play will start at the preset time and volume
level you preset.
• For record timer
The record timer comes on about 30 seconds earlier than
the set time.
i
T
5
20
(Continued on next page)
RQT7360
Using the timers
CLOCK/
TIMER
To cancel the timer
Press [˚PLAY/REC] to clear the timer indicators from the
display.
The timer comes on at the set time everyday if the timer is on.
To change the settings (when unit is on)
• To change the play/record times
Do steps 1, 2, 3, and 5 on the previous page.
• To change the source or volume
Press [
˚
PLAY/REC] to clear the timer indicator from the
display.
Make changes to the source or volume.
Do steps 4 to 5 on the previous page.
A Using the play/record timer
CLOCK/
TIMER
To check the settings (when unit is off)
Press [CLOCK/TIMER] twice.
(When the unit is on, press [CLOCK/TIMER] to select “˚PLAY”
or “˚REC”.)
Every time you press the button:
CLOCK
PLAY
REC
The timer conditions are shown in the following order:
Play timer: start time → finish time → source → volume
Record timer: start time → finish time → source
You can enjoy other sources after you have set the timer.
Turn the unit off before the timer’s start time.
Note
• If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
• If the unit is on, the timer will not function. The unit must be in the
standby mode.
B Using the sleep timer
SLEEP
AUTO OFF
Set the unit to stop and turn off after the certain time.
While enjoying the desired source:
Press [SLEEP, –AUTO OFF] to select the desired
time.
Every time you press the button:
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120
SLEEP OFF
To
Action
cancel the sleep
timer
Press [SLEEP] to select “SLEEP
OFF”.
SLEEP
–AUTO OFF
confirm the
Press [SLEEP].
remaining time
change the time
remaining during
operation
Press [SLEEP] to show the remaining
time, and then press [SLEEP] to
select the desired time.
Note
• The play and sleep timer or the record and sleep timer can be used
together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
i
T
21
RQT7360
Technical specifications
CD SECTION
Disc played
CD/MP3
Sampling frequency
Decoding
AMPLIFIER SECTION
RMS power output
THD 10%,
both channels driven
PMPO power output (For South East Asia only) 150 W
Output impedance
8cm/12cm, CD-R/RW
44.1kHz
15 W per channel (6 Ω)
16 bit linear
Pickup
Beam source/wavelength Semiconductor laser/780nm
(For Norge)
Headphone
16-32 Ω
Bølgelengde
Laserstyrke
Number of channels
Frequency response
Wow and flutter
Digital filter
780nm
Ingen farlig stråling sendes ut
Stereo
FM TUNER SECTION
Frequency range
87.50–108.00 MHz
(50 kHz step)
1.5 µV (IHF)
1.5 µV
75Ω (unbalanced)
20Hz–20kHz (+1, –2dB)
Below measurable limit
8fs
Sensitivity
S/N 26 dB
Antenna terminal(s)
D/A converter
MASH (1 bit DAC)
MP3
Bit rate
Sampling frequency
AM TUNER SECTION
Frequency range
32kbps–320kbps
32kHz, 44.1kHz, 48kHz
522 – 1629 kHz (9 kHz steps)
520 – 1630 kHz (10 kHz steps)
Sensitivity
S/N 20 dB (at 999 kHz)
560 µV/m
SPEAKER SECTION
Type
Speaker(s)
Full range
Tweeter
Impedance
Input power
Output sound pressure level
Frequency range
2 way, 2 speaker system
CASSETTE DECK SECTION
Track system
Heads
Record/playback
Erasure
4 track, 2 channel
10 cm cone type
6 cm cone type
6 Ω
Solid permalloy head
Double gap ferrite head
DC servo motor
30 W (Max)
Motor
82 dB/W (1.0 m)
55 Hz–22 kHz (–16 dB)
70 Hz–20 kHz (–10 dB)
140 x 225 x 228 mm
1.95 kg
Recording system
Erasing system
Tape speed
Overall frequency response (+3, -6 dB) at DECK OUT
NORMAL (TYPE I)
S/N
AC bias 100 kHz
AC erase 100 kHz
4.8 cm/s
Dimensions (WxHxD)
Mass
35 Hz – 14 kHz
47 dB (A weighted)
0.06% (WRMS)
GENERAL
Power supply
For Continental Europe
For United Kingdom, Australia and N.Z.
AC 230-240 V, 50 Hz
Wow and flutter
Fast forward and rewind times
AC 230 V, 50 Hz
Approx. 120 seconds with C-60 cassette tape
For South East Asia
AC 220-240 V, 50/60 Hz
Power consumption
Dimensions (WxHxD)
Mass
48 W
165 x 227 x 320 mm
3.67 kg
Power consumption in standby mode 0.8 W
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital
spectrum analyzer.
Maintenance
If the surfaces are dirty
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback
and recording.
Use a cleaning tape (not included).
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
Re
22
RQT7360
SUOMI
CAUTION!
VAROITUS!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAAT-
TAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUO-
KAN
1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LA-
SERSÄTEILYLLE.
VAROITUS!
ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA
•
KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI MUU-
HUN SULJETTUUN TILAAN, JOTTA TUULETUS
ONNISTUISI. VARMISTA, ETTÄ VERHO TAI
MIKÄÄN MUU MATERIAALI EI HUONONNA TUULE-
TUSTA, JOTTA VÄLTETTÄISIIN YLIKUUMENEMIS-
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
•
BOOKCASE, BUILT-IN CABINET OR IN
ANOTHER CONFINED SPACE. ENSURE THE
UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD
DUE TO OVERHEATING, ENSURE THAT
CURTAINS AND ANY OTHER MATERIALS DO
NOT OBSTRUCT THE VENTILATION VENTS.
ESTA
LIPALOVAARA.
JOHTUVA
SÄHKÖISKU-
TAI
TU-
ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA SA-
NOMALEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA
TAI MUULLA VASTAAVALLA ESINEELLÄ.
ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA AVO-
TULEN LÄHDETTÄ LAITTEEN PÄÄLLE.
HÄVITÄ PARISTOT LUONTOA VAHINGOITTAMAT-
TOMALLA TAVALLA.
•
•
•
DO NOT OBSTRUCT THE UNIT’S VENTILATION
•
OPENINGS WITH NEWSPAPERS, TABLE-
CLOTHS, CURTAINS, AND SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES,
•
•
VAROITUS:
SUCH AS LIGHTED CANDLES, ON THE UNIT.
TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA
KOHTAAVAN MUUN VAHINGON VÄHENTÄMISEKSI EI
LAITETTA SAAALTISTAA SATEELLE, KOSTEUDELLE,
VESIPISAROILLE TAI ROISKEELLE, EIKÄ NESTETTÄ
SISÄLTÄVIÄ ESINEITÄ, KUTEN ESIMERKIKSI
MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE.
DISPOSE OF BATTERIES IN AN ENVIRON-
MENTALLY FRIENDLY MANNER.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS
NORSK
ADVARSEL!
DETTE PRODUKTET ANVENDER EN LASER.
BETJENING AV KONTROLLER, JUSTERINGER EL-
LER ANDRE INNGREP ENN DE SOM ER
VASES,
SHALL
BE
PLACED
ON
THE
APPARATUS.
BESKREVET
FØRE TIL FARLIG BESTRÅLING.
I
DENNE BRUKSANVISNING, KAN
DEKSLER MÅ IKKE ÅPNES, OG FORSØK ALDRI Å
REPARERE APPARATET PÅ EGENHÅND. ALT
SERVICE OG REPARASJONSARBEID MÅ UTFØRES
AV KVALIFISERT PERSONELL.
ADVARSEL!
APPARATET MÅ IKKE PLASSERES
I
EN
•
BOKHYLLE, ET INNEBYGGET KABINETT ELLER
ET ANNET LUKKET STED HVOR VENTILASJONS-
FORHOLDENE ER UTILSTREKKELIGE. SØRG
FOR AT GARDINER ELLER LIGNENDE IKKE FOR-
VERRER
VENTILASJONSFORHOLDENE,
SÅ
RISIKO FOR ELEKTRISK SJOKK ELLER BRANN
FORÅRSAKET AV OVERHETING UNNGÅS.
APPARATETS VENTILASJONSÅPNINGER MÅ
IKKE DEKKES TIL MED AVISER, BORDDUKER,
GARDINER OG LIGNENDE.
•
PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE
LYS, OPPÅ APPARATET.
•
•
BRUKTE BATTERIER MÅ KASSERES UTEN FARE
FOR MILJØET.
ADVARSEL:
FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK
STØT ELLER SKADER PÅ PRODUKTET, MÅ DETTE
APPARATET IKKE UTSETTES FOR REGN, FUKTIGHET,
VANNDRÅPER ELLER VANNSPRUT. DET MÅ HELLER
IKKE PLASSERES GJENSTANDER FYLT MED VANN,
SLIK SOM BLOMSTERVASER, OPPÅ APPARATET.
Re
23
RQT7360
Troubleshooting guide
Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here
occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers 5.
Common Problems
No sound.
Turn the volume up.
The speaker cords may be shorted. Turn the unit off, check and correct the
connections and turn the unit on. 5
Sounds unfixed, reversed or
come from one speaker only.
Check the speaker connections. 5
Humming heard during play.
An AC mains lead or fluorescent light is near the cables. Keep other appliances and
leads away from this unit’s cables.
If possible in your area, turn the AC mains lead’s plug or connector over to reverse the
lead’s polarity.
Incorrect operation performed. Read the instructions and try again.
“ERROR” is displayed.
You plugged the AC mains lead in for the first time or there was a power failure
“- -:- -” appears on the display.
recently.
Set the time. 7
“F76” is displayed.
Check and correct the speaker cord connections. 5
If this does not fix the problem, there is a power supply problem. Consult the dealer.
Listening to the radio
Noise is heard.
Use an outdoor antenna. 5
The stereo indicator flickers
or doesn’t light.
Sound is distorted.
A beat sound is heard.
Turn the TV off or separate it from the unit.
Separate the antenna from other cables and cords.
A low hum is heard during
AM broadcast.
Frequency step is set to 10 kHz. Change the frequency step to 9 kHz. 9
An AM broadcast station
cannot be picked up clearly.
When there is a television set nearby
The picture on the TV
disappears or stripes appear
on the screen.
The location and orientation of the antenna are incorrect. If you are using an indoor
antenna, change to an outdoor antenna. 5
The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set
from the unit.
Using the cassette deck
Recording is not possible.
If the erasure prevention tabs have been removed, cover the holes with adhesive tape.
~
Playing discs
The display is wrong or play
won’t start.
The disc may be upside down. !
Wipe the disc.
Replace the disc if it is scratched, warped, or nonstandard.
Condensation may have formed inside the unit due to a sudden change in
temperature. Wait about an hour for it to clear and try again.
The remote control
Remote control doesn’t work.
Check the batteries are inserted correctly. 4
Replace the batteries if they are worn.
En
Matsushita Electric Industrial Co., Ltd.
Re
Web Site: http://www.panasonic.co.jp/global/
RQT7360-2B
L1203CP2024
|