* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
Printed in Korea
World Wide Web
http://www.samsungmobile.com
Code No.:GH68-05663A
English. 11/2004. Rev 1.0
Contents
Important safety precautions................................ 7
Unpacking ............................................................. 9
Tool icons panel....................................................... 15
Backlight ................................................................ 16
Camera .................................................................. 16
Getting started .................................................... 17
Installing the SIM card ............................................. 17
Using the Keypad Lock feature .................................. 23
Using the stylus pen................................................. 23
Selecting functions and options........................... 25
Using the soft keys .................................................. 25
Using the touch screen............................................. 26
Selecting options ..................................................... 27
Call functions....................................................... 29
Making a call........................................................... 29
Adjusting the volume ............................................... 31
Answering a call ...................................................... 32
Viewing missed calls ................................................ 32
Quickly switching to Silent mode................................ 35
Phone book.......................................................... 36
Storing a number with a name .................................. 36
Using Phone book entry options................................. 39
Dialling a number from Phone book............................ 40
Speed dialling ......................................................... 42
Searching for and dialling a number in Phone book....... 43
Editing a caller group ............................................... 45
Deleting all of the Phone book entries......................... 46
Checking the memory status..................................... 47
Using the service dialling numbers ............................. 47
3
Contents
Entering text ....................................................... 48
Changing the text input mode ................................... 49
Using Pen Stroke mode ............................................ 51
Using Chinese Pinyin mode ....................................... 55
Using Chinese Stroke modes ..................................... 58
Using English mode.................................................. 64
Using Number mode................................................. 65
Using Help mode ..................................................... 68
Options during a call............................................ 69
Putting a call on hold................................................ 69
Using the menu functions ......................................... 70
Muting or sending DTMF tones................................... 72
Sending a sequence of DTMF tones ............................ 72
Searching for a number in Phone book........................ 73
Making a multi-party call .......................................... 74
Using the menus.................................................. 76
Accessing a menu function by scrolling ....................... 76
Using shortcuts ....................................................... 77
List of menu functions .............................................. 78
SIM AT menu ....................................................... 83
Call records ......................................................... 84
Missed calls (Menu 2.1) ............................................. 84
Received calls (Menu 2.2) .......................................... 85
Dialled calls (Menu 2.3) ............................................. 85
Delete all (Menu 2.4)................................................. 86
Call time (Menu 2.5) ................................................. 86
Call cost (Menu 2.6)................................................. 87
Network services................................................. 88
Call diverting (Menu 3.1) ........................................... 88
Call barring (Menu 3.2)............................................. 90
Call waiting (Menu 3.3).............................................. 91
Network selection (Menu 3.4)..................................... 92
Caller ID (Menu 3.5) ................................................. 93
Closed user group (Menu 3.6) .................................... 93
Band selection (Menu 3.7) ......................................... 95
4
Contents
Sound settings..................................................... 96
Power on/off (Menu 4.7).......................................... 100
Broadcast messages (Menu 5.6) ............................... 123
Funbox .............................................................. 125
Games & More (Menu 6.3) ....................................... 133
Paintbrush (Menu 6.4)............................................. 136
Sounds (Menu 6.5) ................................................. 139
Images (Menu 6.6) ................................................. 140
Delete all (Menu 6.7) .............................................. 140
Memory status (Menu 6.8)....................................... 141
Organiser........................................................... 142
Alarm (Menu 7.1) ................................................... 142
Calendar (Menu 7.2) ............................................... 144
Time & Date (Menu 7.3) .......................................... 147
Calculator (Menu 7.4).............................................. 148
To do list (Menu 7.5)............................................... 150
Voice memo (Menu 7.6) .......................................... 152
Currency exchange (Menu 7.7)................................. 154
Dictionary (Menu 7.8) ............................................. 155
Camera.............................................................. 156
Take photos (Menu 8.1)........................................... 156
My photos (Menu 8.2) ............................................. 160
Video (Menu 8.3).................................................... 161
Memory status (Menu 8.4)....................................... 163
5
Contents
Phone settings................................................... 164
Activate infrared (Menu 9.1)..................................... 164
Access codes ..................................................... 180
Phone password .................................................... 180
PIN...................................................................... 181
PUK ..................................................................... 181
PIN2 .................................................................... 182
PUK2 ................................................................... 182
Barring password................................................... 183
Health and safety information ........................... 184
Exposure to radio-frequency energy
(SAR information).................................................. 184
Precautions when using batteries............................. 185
Road safety .......................................................... 187
Operating environment........................................... 187
Electronic devices .................................................. 188
Potentially explosive environments........................... 190
Emergency calls .................................................... 191
Other important safety information .......................... 192
Care and maintenance............................................ 193
Glossary ............................................................ 195
Quick reference card.......................................... 201
6
Important safety
precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switching off near all medical equipment
Switch off your phone near medical equipment.
Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy. Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
Water resistance
Your phone is not water-resistant. Keep it dry.
7
Important safety precautions
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency call
Key in the emergency number for your present
location, then press the
key. Give all the
necessary information as accurately as possible. Do
not end the call until given permission to do so.
Keeping small children away from your phone
Keep the phone and all its parts including
accessories out of the reach of small children.
Accessories and batteries
Use only Samsung-approved accessories. Use of
any unauthorised accessories could damage your
phone and may be dangerous.
Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved
chargers.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and safety information” on page 184.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
8
Unpacking
Your package contains the following items:
Travel charger
Handset
Battery
PC link CD
PC data cable
Straight headset
User’s manuals
Finger strap
Stylus pen
Battery charger
Note: The items supplied with your phone and
available accessories may be different,
depending on your country or service provider.
9
Your phone
Phone layout
The following illustration shows the main elements
of your phone:
Earpiece
Camera
Touch screen
Tool icons
Navigation
panel
(Up/Down/
Right/Left) keys
Headset jack
Soft key (left)
Soft key (right)
WAP browser/
Confirm key
Power on/off /
Menu exit key
Volume/Menu
browse keys
Dial key
Cancel/
Correct key
Alphanumeric
keys
Infrared port
Microphone
Special
function keys
10
Your phone
Key(s) Description
Performs the functions indicated by the
screen text above them, on the bottom
line of the display.
(soft keys)
In Menu mode, scrolls through the
menu options and Phone book.
While entering text, moves the cursor,
depending on which side you push.
In Idle mode, allows you to access the
following menus, respectively:
• Up: Sound settings
• Down: Camera
• Left: Text messages
• Right: Voice memo
In Idle mode, allows you to launch the
WAP browser or Samsung Fun Club.
Also, launches the WAP browser when
held down.
In Menu mode, selects the highlighted
main menu or menu option.
Makes or answers a call.
In Idle mode, recalls the last number
you dialled or received when held down.
Deletes characters from the display.
In Menu mode, returns you to the
previous menu level.
Ends a call. Also switches the phone on
and off when held down.
In Menu mode, cancels your input and
returns the phone to Idle mode.
11
Your phone
Key(s) Description (continued)
In Idle mode, accesses your voice mail
when held down.
Enters numbers, letters, and some
special characters.
Enters special characters.
Performs various functions.
(on the left side of the phone)
Adjusts the ringer volume when the
phone is ringing and the earpiece
volume during a call.
In Idle mode with the phone open,
adjusts the keypad tone volume. With
the phone closed and the external
display on.
In Menu mode, scrolls through menu
options and Phone book.
12
Your phone
Display
Display layout
The display has 3 areas:
Icons
Text and
graphics area
Soft key function
indicators
Menu
Name
Area
Description
First line
Displays various icons.
See page 14.
Middle
Displays messages, instructions,
and any information that you
enter, such as the number you
are dialling.
Last line
Shows the current functions
assigned to the two soft keys.
13
Your phone
Icons
Icon Description
Shows the received signal strength. The
greater the number of bars, the stronger
the signal.
Appears when you set an alarm to ring at
a specified time. For details, see
page 142.
Appears when the IrDA port is active. For
details, see page 164.
Appears when you are out of your home
area and have logged onto a different
network; for example, when travelling in
other countries.
Appears when you are connected to the
GPRS network.
Appears when a call is in progress.
Appears when you are out of your service
area. When it displays, you cannot make
or receive a call.
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Appears when a new multimedia message
has been received.
Appears when the call Diverting feature is
activated. For details, see page 88.
14
Your phone
Icon Description (continued)
Appears when Silent mode is active or you
set the phone to vibrate when you receive
a call. For further details, see page 35 and
page 97 respectively.
Appears when Mute mode is active. For
details, see page 71.
Shows the level of your battery. The more
bars you see, the more power you have
remaining.
Tool icons panel
The tool icons below the display performs the
following functions when tapped:
Icon Description
Returns the display to Idle mode.
Enters the Phone book menu.
Enters the Dictionary menu
Enters the Paintbrush menu.
Enters the Text messages menu.
15
Your phone
Backlight
The backlight illuminates the display and the
keypad. When you press any key or open the
phone, the backlight comes on. It goes off when no
keys are pressed within a given period of time,
depending on setting in the Back light menu
(Menu 9.2.3). The display turns off after one
minute to conserve battery power.
To specify the length of time the backlight is active,
set the Back light menu. See page 169 for further
details.
Camera
The camera on the top left of your phone allows you
to take a photo or record a video while on the
move.
For further details about the Camera feature, see
page 156.
16
Getting started
Installing the SIM card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and so on.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting, or removing the card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the
displays.
key until the power-off image
2. Remove the battery.
➀
➀
Press down the battery lock above the battery.
Slide away the battery, as shown.
➀
➀
17
Getting started
3. Slide the SIM card into the SIM card socket, as
shown, so that the card locks into position.
Make sure the gold coloured contacts of the card
face into the phone.
Note: When you need to remove the SIM card,
slide it upward, as shown, and take it out of
the socket.
18
Getting started
4. Place the battery so that the grooves on it align
with the tabs on the phone.
5. Slide the battery toward the top of the phone
until it clicks into place.
Make sure that the battery is properly installed
before switching the power on.
19
Getting started
Charging the battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter and a battery charger
come with your phone for charging the battery. Use
only approved batteries and chargers. Ask your
local Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery recharges fully in approximately
200 minutes.
Using the travel adapter
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at the bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
20
Getting started
3. When charging is finished, unplug the adapter
from the power outlet and disconnect it from the
phone by pressing the buttons on both sides of
the connector and pulling the connector out.
➀
➀
➀
Note: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and a
message repeats at regular intervals on the display.
In this case, your phone will turn off the backlight
to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
21
Getting started
Switching on or off the phone
1. Press and hold the
switches on.
key until the phone
2. If the phone asks you to enter a password, enter
the password and press the OK soft key. The
password is preset to “00000000” at the factory.
For further details, see page 180.
3. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 181.
The phone searches for your network and, after
finding it, the idle screen appears on the display.
Now, you can make or receive calls.
Note: To change the language, use the
Language menu (Menu 9.5). For further
details, see page 171.
4. When you wish to switch off the phone, hold
down the
displays.
key until the power-off image
Note: If your phone is closed, you first need to open it
to activate the display and the keypad.
WARNING!
Do not switch on the phone when mobile phone use
is prohibited or when it may cause interference or
danger.
22
Getting started
Using the Keypad Lock feature
You can open the phone to use the number keypad
and close the phone to make it compact.
When you close the phone, the display turns off and
the phone automatically locks the exposed function
keys to keep it from being pressed accidentally.
When you press and hold down the
key or
either of the Volume keys on the left side, the
display turns on and shows “Keypad locked.” To
unlock the keypad, press and hold the Unlock soft
key. The keypad is activated and you can use the
phone’s functions.
Using the stylus pen
Your phone’s display is a touch screen which allows
you to select an item displayed by tapping on it or
to write text as you would on paper. A stylus pen is
supplied with your phone to let you tap and write on
the touch screen.
1. Expand the stylus pen by pulling the handle.
2. Use the stylus pen, holding it as you would a pen
or pencil.
23
Getting started
When you aren’t using the stylus pen, store it in the
phone by sliding it into the storage slot on the
bottom of the phone.
24
Selecting functions
and options
Your phone offers a set of functions that allow you
to customise it. These functions are arranged in
menus and sub-menus, accessed using the two soft
keys. Each menu and sub-menu allows you to view
and alter the settings of a particular function.
Using the soft keys
The roles of the soft keys vary, depending on the
function you are currently using; the labels on the
bottom line of the display just above each key
indicate their current role.
Example:
Menu
Name
Press the right soft key
to access the Phone
book feature.
Press the left soft
key to access Menu
mode.
25
Selecting functions and options
In each main menu, one of the most popular sub
menus is assigned to the left soft key for
example, if you select the Sound settings menu,
Ring tone is assigned to the left soft key. This
allows you to quickly access the most popular
menus.
Using the touch screen
Using the stylus pen, you can tap items on the
display of your phone to perform the following
operations:
• Enter main menus
• Select menu options
• Perform soft key commands
• Scroll through lists
• Enter text on the onscreen keyboards
Note: Tapping on main menus has the same effect as
pressing the left soft key; it allows you to
quickly access the most popular sub menus.
26
Selecting functions and options
Selecting options
To select an option, you can use both the keypad
and the touch screen.
To view the various functions and options available
and to select the one you want:
To
Choose one of the
following options:
perform a soft key
command
• Press the corresponding
soft key.
• Tap the soft key indicator.
scroll through a list
• Press the Up or Down key.
• Tap the up or down arrow
on the right of the list.
select an option or a
function
• Tap the option or function.
• Press the Select or OK
soft key or
key when
the option or function is
highlighted.
• Tap Select or OK when
the option or function is
highlighted.
• Press the corresponding
number key when the
option or function is
numbered.
move back up one
level in the menu
structure
• Press the
• Tap
soft key.
.
• Press the
C
key.
key.
exit the menu
• Press the
structure without
changing the settings
• Close the phone.
27
Selecting functions and options
In some functions, you may be asked for a
password or PIN. Enter the code and tap OK or
press the OK soft key.
Note: When you access a list of options, your phone
highlights the currently selected option. If,
however, there are only two options, such as
On/Off or Enable/Disable, your phone
highlights the option that is not currently active
so that you can select it directly.
28
Call functions
Making a call
When the idle screen displays, enter the area code
and phone number, then press the key.
Note: When you activate the Auto redial option in
the Extra settings menu (Menu 9.7), the
phone will automatically redial up to 10 times if
the person does not answer the call or is
already on the phone. See page 175 for further
details.
Making an international call
1. Press and hold the
0
key.
The character appears.
+
2. Enter the country code, area code, and phone
number and press the
key.
Correcting the number
To clear
Press the
key.
the last digit
displayed
C
any other digit in Left or Right key until the
the number
cursor is immediately to the
right of the digit to be cleared.
Press the
C
key. You can also
insert a missing digit.
the whole display
C
key and hold it for more than
one second.
29
Call functions
Ending a call
When you want to end your call, briefly press the
key or close the phone.
Redialling the last number
The phone stores the numbers of the calls you’ve
dialled, received, or missed, if the call recipient of
caller or the call recipient is identified. See “Call
records” on page 84 for further details.
To recall any of these numbers:
1. If you have typed characters on the display,
press the
key to return to Idle mode.
2. Press the
key to display a list of the most
recent numbers used, in the order you dialled or
received them.
3. Scroll through the numbers until the number
you want highlights.
4. Choose one of the following options:
• To dial the number, press the
key.
• To edit the number, select Options and then
select Edit. Change the number, referring to
“Correcting the number” on page 29.
• To delete the number, select Options and then
select Delete
.
• To delete all of the numbers on the Call log list,
select Options and then select Delete all. For
details, see page 86.
30
Call functions
Making a call from Phone book
You can store phone numbers that you use
regularly on the SIM card or in the phone’s memory.
These entries are collectively called Phone book.
Once you have stored a number in Phone book, you
can dial it by pressing a few keys. You can also
assign your most frequently-used numbers to
number keys using the Speed Dial feature.
For further details about the feature, see page 36.
Adjusting the volume
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of the
phone.
Press the
key to increase the volume level and
the key to decrease the level.
In Idle mode with the phone open, you can also
adjust the keypad tone volume using these keys.
31
Call functions
Answering a call
When somebody calls you, the phone rings and
displays the incoming call image.
The caller’s phone number or name, if stored in
Phone book, displays.
1. If necessary, open the phone. Press the
key
or select Accept to answer the incoming call.
When the Anykey answer option in the Extra
settings menu (Menu 9.7) is activated, you
can press any key to answer a call except for the
key and the Reject soft key. See page 175.
When th Active slide option in the Extra
e
settings menu is activated, you can answer the
call simply by opening the phone. See page 175.
Note: To reject the call, if Anykey answer is
unchecked, press and hold one of the
Volume keys, or press the Reject soft key
or the
key.
2. End the call by closing the phone or pressing the
key.
Note: You can answer a call while using Phone book
or menu features. After ending the call, the
display returns to the function screen you were
using.
Viewing missed calls
When you are unable to answer a call for any
reason, you can find out who called you so that you
can call the person back.
32
Call functions
The number of calls you have missed displays on
the idle screen immediately after a call is missed.
To view a missed call immediately:
1. If the phone is closed, open the phone.
2. Select View
.
The number for the most recent missed call
displays, if available.
3. Scroll through the missed calls if there is more
than one.
4. Choose one of the following options:
• To call the number displayed, press the
key.
• To edit or delete a missed call number, select
the call. See the following sections.
Editing a missed call number
Note: When the number for the missed call is not
available, the Edit option does not display.
1. Select Options or press the
key and then
select the Edit option.
2. Change the number.
3. Choose one of the following options:
• To call the number, press the
key.
• To store the number, select Save and enter a
name and the location. For further details, see
page 36.
33
Call functions
Deleting a missed call
1. Select Options or press the
key.
2. Select Delete
.
You can press the
key at any time to exit the
Missed Call feature.
Note: You can access the Missed Call feature at any
time by selecting the Missed calls menu
(Menu 2.1). For further details, see page 84.
34
Call functions
Quickly switching to Silent mode
Silent mode is convenient when you wish to stop
the phone from making noise, in a theatre for
example.
In Idle mode, press and hold the
key until the
“Silent mode” message and the Vibration icon (
display. The phone also vibrates.
)
In Silent mode, instead of sounds, your phone will
vibrate, flash its light, or do nothing depending on
the function and the situation.
To exit and reactivate the previous sound settings,
press and hold the
key again until “Exit silent
mode” appears. The Vibration icon ( ) no longer
displays.
Notes
:
• When you turn off the phone, Silent mode is
automatically deactivated.
• Activating Silent mode will not turn off the camera
shutter sound.
35
Phone book
You can store phone numbers and their
corresponding names in both your SIM card and
your phone’s memory. They are physically separate,
but are used as a single entity, called Phone book.
Note: Depending on your particular SIM card, the
maximum number of phone numbers the SIM
card can store may differ.
Storing a number with a name
There are two ways to store a number:
• Entering a number and then selecting Save in
Idle mode
• Using the New entry option in the Phone book
menu
Storing a number in Idle mode
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the
further details, see page 29.
C
key. For
2. When you are sure that it is correct, select
Save
.
3. Select an icon to identify the category in which
the number is to be stored. Three categories are
available:
•
•
•
: Mobile phone number
: Office number
: Home number
To select the category, press the Left or Right key
and press the Select soft key.
36
Phone book
4. Select a memory location, either SIM or Phone
by pressing the Up or Down key and press the
Select soft key.
,
Note: When you change phones, any numbers
stored in your SIM card are automatically
available with the new phone, whereas any
numbers stored in the phone’s memory
must be reentered.
5. Enter a name and select OK
.
For further details about how to enter
characters, see page 48.
6. When the phone confirms the name you’ve
entered, select OK
.
7. If you do not want to save the number and
name in the suggested location, press the
C
key
to clear the location number and enter another
location by pressing the number keys.
8. Select OK to store the name and number.
After storing, the phone displays the phone
number or name you just stored.
9. Choose one of the following options:
• To dial the number, press the
key.
• To use the entry options, select Options or
press the
page 39.
key. For further details, see
• To return to the idle screen, press the
key.
37
Phone book
Storing a number using the Phone book
menu
1. When the idle screen displays, select Name or
tap
.
2. Select New entry
.
3. Select an icon to identify the category of the
number to be stored.
Note: The E-mail icon (
) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
4. Select a memory location, either SIM or Phone
by pressing the Up or Down key and press the
Select soft key.
,
Note: When you are saving an e-mail address,
SIM is not available.
5. Enter a name and select OK
.
For further details about how to enter
characters, see page 48.
6. When the phone confirms the name you
entered, select Save
.
7. Enter the number or address you want to store
and select OK
.
8. Continue the procedure from step 7 on page 37
to store the number.
38
Phone book
Using Phone book entry options
While accessing any Phone book entry, select
Options or press the
key to access the options
for the entry.
The following options are available:
Photo caller ID: allows you to assign one of the
photos you took using the camera as a caller ID
image to be displayed when you receive a call from
the selected number. For details about the Camera
feature, see page 156.
Select photo: allows you to select a photo for the
number.
Take photo: allows you to take a new photo to be
used as a caller ID.
View: displays the photo assigned to the number.
Delete caller ID: cancels the photo caller ID setting
for the number.
Paste: allows you to paste the number into the
normal dialling mode. Use this option to dial a
number similar to one in Phone book, such as a
different extension in the same office.
Use the
see page 29 for further details. When you are ready
to dial, press the key.
C
key to change the number as required;
Edit: allows you to edit the name and number.
Select One entry to change the name and/or
phone number for the selected entry. If you change
the name, the number is saved separately with the
new name.
Select All entry to change only the name of the
entry.
39
Phone book
Delete: allows you to delete the name and number
from Phone book. You are asked to confirm that you
wish to delete the name and number by selecting
Yes or
key.
Copy: allows you to copy the number to another
location. You can select the memory location, either
SIM or Phone, and the location number.
Caller group: allows you to organise your Phone
book entries in caller groups so that the phone
alerts you in a specific way when a person from one
of your groups calls you. Select one of the 10
groups available.
To remove an entry from a group, select the No
group option.
For further details about how to change caller group
properties, see page 45.
Add entry: allows you to add a new number to the
currently selected name.
Send via IrDA: allows you to send one or all
numbers in the entry to another phone via the
infrared port. For details, see page 167.
Dialling a number from Phone book
Once you have stored phone numbers in Phone
book, you can dial them easily and quickly by using
the location numbers that were assigned to them in
Phone book.
40
Phone book
Note: If you cannot remember a location number, you
must go into the Search option by selecting
Name or tapping
to search for the entry by
name. For details, see page 43.
Dialling a number from the SIM card
1. In Idle mode, enter the location number of the
number you want to dial and press the
key.
The list of the entries in the SIM card appears.
2. If necessary, scroll through the list.
3. When the number displays, select Dial or press
the
or
key.
Dialling a number from the phone’s
memory
1. In Idle mode, press and hold the
appears.
0
key. A
+
2. Enter the location number of the number you
want and press the key.
The list of the entries in the phone’s memory
appears.
3. If necessary, scroll through the list.
4. When the number displays, select Dial or press
the
or
key.
41
Phone book
Speed dialling
You can assign up to 8 phone numbers from your
Phone book list that you use most frequently to the
number keys (
2
to 9), and then dial them easily
whenever you want, simply by pressing and holding
the associated number key.
Setting up speed-dial entries
1. When the idle screen displays, select Name or
tap
.
2. Select Speed dial
.
3. Select the key to which you wish to assign the
speed-dialling number, from the to keys.
2
9
Note: Memory location 1 is reserved for your Voice
Mail server number.
If you have already assigned a number to the
key, the Options soft key replaces the OK soft
key. Go to step 7.
4. Enter the first few letters of the name that you
want to find and select OK
.
5. Select an entry from the Phone book list and
select View
.
6. Select a number, if the entry has more than one.
7. Once you have assigned a number to the key,
you can access the following options by selecting
Options or pressing the
key:
•
Change: allows you to assign a different
number to the key.
•
Delete: allows you to clear the setting so that
no number is assigned to the key.
42
Phone book
•
•
Delete all: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
Number: allows you to view the number
assigned to the key. You can dial the number
by pressing the
key.
8. When you are finished, select
key.
or press the
Speed-dialling
To speed-dial the numbers assigned to the
keys, press and hold the appropriate key.
2
to
9
Searching for and dialling a number
in Phone book
After storing numbers in Phone book, you can
search for them in two ways; by name and by caller
group.
Searching for a number by name
1. When the idle screen displays, select Name or
tap
and then select Search.
You are asked to enter a name.
2. Enter the first few letters of the name that you
want to find and select OK
.
The Phone book entries are listed, starting with
the group that most closely matches your input.
3. Select the entry you want and select View
.
43
Phone book
4. Select one of the following options:
• To dial the number, press the
key.
• To use the entry options, select Options or
press the
page 39.
key. For further details, see
• To return to the idle screen, press the
key.
Searching for a number by caller group
1. When the idle screen displays, select Name or
tap
.
2. Select Group search. You are asked to enter a
group name.
3. Enter the first few letters of the group name that
you want to find and select OK
.
The caller groups are listed, starting with the
entry that most closely matches your input.
4. Select a group from the list.
The Phone book entries in the caller group are
listed.
5. Select the entry you want.
6. Select one of the following options:
• To dial the number, press the
key.
• To use the entry options, select Options or
press the
page 39.
key. For further details, see
• To return to the idle screen, press the
key.
44
Phone book
Editing a caller group
1. When the idle screen displays, select Name or
tap
.
2. Select Group edit
.
3. Select the group that you want to find.
4. Select each option and change the settings, as
required. The following options are available:
•
•
•
•
Call ring tone: allows you to set a ring tone
to be used when you receive a call from a
member of that group.
SMS tone: allows you to set an SMS tone to
be used when you receive a message from a
member of that group.
Graphic: allows you to set a graphic icon to be
displayed when you receive a call from a
member of that group.
Group name: allows you to assign a name to
the group. For further details about how to
enter characters, see page 48.
5. When you are finished, select
key.
or press the
45
Phone book
Deleting all of the Phone book
entries
You can delete all of the entries in the selected
memory or both memories.
1. When the idle screen displays, select Name or
tap
2. Select Delete all
3. Select the memory you want to empty, All
.
.
,
SIM, or Phone, in order to place a check mark.
You can remove the check mark by selecting the
option again.
4. When you have finished marking, select Delete
to delete the entries in the selected memory
location(s).
5. Enter the phone password and select OK
.
Note: The password is preset to “00000000” at
the factory. To change it, see page 173.
6. When the confirmation message appears, select
Yes
.
To cancel the deletion, select No
.
7. When the display asks for your confirmation,
select Yes
.
8. When you are finished, select
key.
or press the
46
Phone book
Checking the memory status
You can check how many names and numbers are
stored in Phone book, in both the SIM card and the
phone’s memory. You can also see the capacity of
both memories.
1. When the idle screen displays, select Name or
tap
.
2. Select Memory status
.
3. Select a memory location.
A pop-up box shows to view the number of the
entries you have stored and the total number of
the entries you can store in the SIM card and
the phone’s memory.
4. When you are finished, select
key.
or press the
Using the service dialling numbers
You can view the list of Service Dialling Numbers
(SDN) assigned by your network provider. These
numbers include emergency numbers, directory
enquiries, and voice mail numbers.
1. When the idle screen displays, select Name or
tap
.
2. Select SDN
.
3. Select the number you want.
4. To dial the number displayed, select Dial or
press the
or
key.
Note: This menu is available only when your SIM card
supports Service Dialling Numbers.
47
Entering text
The phone allows you to enter characters for
messages and names in Chinese and English by
using the keypad and the touch screen. To enter
Chinese text, the phone provides several widely
used pronunciation based (Pinyin) and character
shape based (Stroke) input methods to meet the
preferences of different users, allowing for greater
convenience and ease of use.
You can also enter any combination of Chinese
characters, alphabets, numbers, and special
symbols including punctuation marks.
The following text input modes are available on
your phone:
• Pen Stroke mode
• Pinyin mode
• Chinese Simplified Stroke mode
• Quick English mode(
• English mode
mode)*
• Chinese Traditional Stroke mode
• Number mode
• Symbolic mode
• My Words mode
Directions for using each of the text input modes
appear later in this section.
*
is a registered Trademark of Tegic Communica-
tions, Inc. and is licensed under U.S. Patent
5,818,437/5,953,541/6,011,554.
48
Entering text
Note: The available text input modes may be
different, depending on your language setting.
Refer to the following table:
Language
Available modes
English
Pen Stroke, CHN Stroke, Quick
English, English, Number,
Symbolic, My Words
Chinese T
Chinese S
Pen Stroke, CHN Stroke, Quick
English, English, Number,
Symbolic, My Words
Pen Stroke, Pinyin, CHN Stroke,
Quick English, English, Number,
Symbolic, My Words
Changing the text input mode
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: Entering a name for a Phone book entry
Text input
mode indicator
Note: Depending on your particular SIM card, the
maximum number of the characters you can
enter may differ.
49
Entering text
To change to another text input mode:
1. Select the current mode indicator on the right
soft key field.
2. Select the mode you want to use.
Note: If you want to exit the menu without
changing to a new mode, select
.
The selected text input mode indicator appears
at the bottom of the display.
Input mode
Indicator
(see page 51)
Pen Stroke mode
Chinese Pinyin mode
(see page 55)
(see page 58)
Chinese Simplified
Stroke mode
Quick English mode
English mode
(see page 61)
(see page 64)
(see page 58)
Chinese Traditional
Stroke mode
Number mode
Symbolic mode
(see page 65)
No indicator
(see page 66)
My Words mode
No indicator
(see page 67)
50
Entering text
Using Pen Stroke mode
Pen Stroke mode allows you to write the letters you
want to enter on the touch screen using the stylus
pen as you would on paper. You can then choose
from the displayed choices corresponding to your
pen stroke. You can enter Chinese and English
letters, symbols, and numbers without having to
change the text input mode.
In this mode, you can also open the alphabetic,
numeric, and symbolic onscreen keyboard and
enter text simply by tapping the characters on the
keyboard.
Typing characters in Pen Stroke mode
1. Write the character you want on the Pen Stroke
field.
Notes
:
• You need to follow the correct sequence of
strokes. For the sequences of English alphabet,
numbers, and symbols, see page 52.
• Because of the touch screen’s sensitivity, choices
displayed may differ each time you write a
character.
• You can not enter some symbolic characters with
the touch pad, use the keypad to enter them.
Text field
Scrolls through
choices.
Enters a space.
Enters a period.
Enters a comma.
Pen Stroke
field
Enters a colon.
Character
Selection field
Opens the onscreen
keyboard. See
page 53.
The first choice is automatically inserted into the
Text field.
51
Entering text
2. If the phone doesn’t recognise your stroke, you
can select a character from the Character
Selection field.
The first character is replaced with the selected
one.
Note: If the character you want doesn’t display in
the Character Selection field, you need to
clear the entered character and then start
over again.
3. Continue writing the next characters.
Sequences of pen strokes
When you write English alphabet, numbers, and
symbols, refer to the following tables to enter
strokes in the correct order.
English
52
Entering text
• Tap Abc to open the alphabetic keyboard.
Changes the
letter-case.
Enters a space.
Opens the alphabetic
keyboard.
Switches to
Caps Lock
mode.
Switches to Pen
Stroke mode.
Shifts the letter case.
• Tap 123 to open the numeric keyboard.
Changes the
letter-case.
Enters a space.
Opens the numeric
keyboard.
Switches to Pen
Stroke mode.
• Tap !%? to open the symbolic keyboard.
Changes the
letter-case.
Enters a space.
Opens the symbolic
keyboard.
Switches to Pen
Stroke mode.
54
Entering text
Using Chinese Pinyin mode
Pinyin is a system to write pronunciation of Chinese
words using the Latin alphabets. With the Pinyin
input method, you can enter Chinese characters by
keying in the Pinyin string from the phone’s keypad
and the phone automatically presents the matching
words.
This mode allows you to enter Pinyin characters
with only one key press per letter.
Typing characters in Pinyin mode
1. Press the keys corresponding to the phonetic
spelling, referring to the alphabets printed on
the keys. Notice that the choices in the
Character Selection field change. All of the
phonetic spellings corresponding to the keys you
press display.
Example: Typing “ ” in Pinyin mode
Key Stroke field
Press the
5
and
4
keys to enter “li.”
To select “li”, press
the Right key.
Character
Selection field
2. Select the Pinyin you want.
3. If you cannot find the character on the display,
scroll through choices in the Character Selection
field by pressing the Down key. To move back,
press the Up key.
55
Entering text
When the character you are typing appears in
the Character Selection field, you may select it,
without completing the Pinyin spelling for the
character.
4. When the character displays, press the
activate the Character Selection field. A number
to ) is added to the beginning of a
1
key to
(7
corresponding character.
5. With the Character Selection field being
activated, tap the character or press the
7
key
to the
key to select the corresponding
character.
Press the
9
key
to select “ ” or
just tap it.
Note: If you enter the first character of the name you
assigned to a My Words item (see page 67), the
display shows you the character at the end the
Pinyins for your keypress. To use the item,
press the Right key to highlight the character
and then press the
key.
56
Entering text
Inserting a space
To insert a space between characters, press the
key when the cursor blinks in the Text Area.
Scrolling
To move the cursor through your text, press the
Left or Right key.
Clearing strokes and characters
Press the
C
key one or more times to remove key
stokes to the left. When the Key Stroke field is
empty, pressing the
the Text Area.
C
key removes characters from
Rapid character entry
Rapid character entry is easy in any mode, using
the Character Selection field. As you enter
characters, your phone predicts the next character
you might want and presents choices in the
Character Selection field. When the character you
want appears, you may select it as described in
steps 4 and 5 in “Typing characters in Pinyin mode”
on page 55.
For example, when you want to type the word
“zhong guo (
the following keystrokes;
),” enter the first character using
, and . You
9,
4,
6,
6,
1
7
don’t need to complete the Pinyin spelling to include
“guo ( ).” With no extra typing, the character
displays conveniently in the Character Selection
field for you to choose.
57
Entering text
Using Chinese Stroke modes
Your phone provides Chinese Simplified Stroke
mode and Chinese Traditional Stroke mode. These
modes allow you to enter individual Chinese
strokes, in written order, from top to bottom and
from left to right.
The two modes work similarly, but the characters
that appear on the display may differ.
Even though there are many different strokes used
to create Chinese characters, the strokes are
classified into 5 basic categories; heng, shu, pie,
dian, and zhe. The basic strokes are printed on the
1
to
5
keys on the keypad.
To enter a stroke, press the key printed with the
stroke that most closely represents the exact stroke
you want.
The table shows the stroke/key relationship:
58
Entering text
Typing stokes and characters in Stroke
mode
1. To type a character, press the keys
corresponding to its component strokes. Press
the keys on the phone in order that you would
write the strokes, using one press per stroke.
Example: Typing “ ” in Chinese Traditional
Stroke mode
Enter name
Key Stroke field
Press the
keys to enter
.”
5
and
3
Character
Selection field
OK
“
2. The phone displays your strokes in the Key
Stroke field and offers character choices in the
Character Selection field. As you enter strokes,
notice that the choices in the Character
Selection field change. To scroll through the
choices, press the Down key. To move back,
press the Up key.
3. When the character you are typing appears in
the Character Selection field, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
Selection field correspond to the keys
the keypad.
7
to
on
To select a character and add it to your text,
press the corresponding key (
7
to ). You can
also tap the character.
59
Entering text
Note: If you are uncertain of the order of one or more
strokes, press the
6
key in place of each
questionable stroke. Continue entering strokes
until the character displays in the Character
Selection field or until you finish the character.
Inserting a space
To insert a space between characters, press the
key when the cursor blinks in the Text Area.
Scrolling
To move the cursor through your text, press the
Left or Right key.
Clearing strokes and characters
Press the
C
key one or more times to remove
strokes to the left. When the Key Stroke field is
empty, pressing the
the Text Area.
C
key removes characters from
60
Entering text
Rapid character entry
Rapid character entry is easy in any mode, using
the Character Selection field.
As you enter characters, your phone predicts the
next character you might want and presents choices
in the Character Selection field. When the character
you want appears, you may select it as described in
step 3 on page 59.
In most cases, the character you want appears in
the Character Selection field before you enter all of
the strokes to build it.
For example, try typing the twelve stroke character
pair “
and
” using the following keystrokes;
. Even though “ ” is a twelve stroke
2
,
8,
7
character pair, your phone enables you to type it in
only three key presses!
Using Quick English mode
This mode allows you to enter English words with
only one key press per letter. Each key on a keypad
has more than one letter; for example, pressing the
5
key can enter J, K, or L. However, Quick English
mode automatically compares the series of key
presses with an internal linguistic database to
determine the most likely word.
The mode requires far fewer keystrokes than the
traditional multi-tap method, English mode.
Note: In Quick English mode, the touch screen is not
available.
61
Entering text
To enter a word in Quick English mode:
1. Press keys on the phone just once per a letter
you want. For example, to enter “HELLO,” press
the
4,
3,
5,
5, and
6
keys.
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Type to the end of the word before editing or
deleting any keystrokes.
3. When the word displays correctly, go to step 4,
insert a space by pressing the
entering the next word.
key and start
If the word doesn’t displays correctly, press the
key or Down key repeatedly to display
0
alternative word choices for the keys that you
pressed.
Example: Both “OF” and “ME” use the
6
and
3
keys. The phone displays the most
commonly used choice first.
4. Insert a space by pressing the
entering the next word
key and start
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the
0
key or the
Down key to display the alternative words.
2. When there are no more alternative words, the
display shows Add on the bottom line. Press the
Add soft key.
62
Entering text
3. If necessary, clear the word using the
C
key and
enter the word you want to add using English
mode; see page 64.
4. Press the OK soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress series.
Smart punctuation
To enter periods, hyphens, or apostrophes, press
the
1
key. Quick English mode applies grammar
rules to ensure that the correct punctuation is used.
Changing the case
To change case of the letters, use the
key. There
are three cases; Lower case( ), Initial Capital( ),
and Capital Lock( ).
Scrolling
To move the cursor through your text, press the
Left or Right key.
Clearing letters and words
To delete letters, press the
C
key. Press and hold
the key to clear the display.
C
63
Entering text
Using English mode
When typing in English mode, you can tap the
alphabets on the onscreen keyboard, or press the
key labelled with the character you want:
- Once for the first character
- Twice for the second character
- and so on.
This method is called Multi-tap typing.
For example, you need to press the
times to display the character “C” and the
times to display the character “K.”
2
key three
key two
5
The cursor moves to the right when you press a
different key. When entering the same letter twice
or a different letter on the same key, just wait for a
few seconds for the cursor to move to the right
automatically, and then select the next letter.
Refer to the table below for more information about
the available characters by pressing the number
keys:
Space
64
Entering text
Inserting a space
You can insert a space between words by pressing
the key.
Changing the case
To change case of the letters, use the
key. There
are three cases; Capital Lock( ), Lower case( ),
and Initial Capital( ).
Scrolling
To move the cursor through your text, press the
Navigation keys.
Clearing letters and words
To delete letters, press the
C
key. Press and hold
the key to clear the display
C
Using Number mode
Number mode enables you to enter numbers in
your text, such as a telephone number. Tap the
number on the onscreen keyboard or press the keys
corresponding to the digits you want to enter.
65
Entering text
Using Symbolic mode
Symbolic mode enables you to insert symbols into
your text.
• To select a symbol, press the corresponding
number key or just tap the symbol.
• To display more symbols. press the Up or Down
key or tap the up or down arrow.
• To insert the symbol(s) into your text, select OK
or press the
key.
• To clear the symbol(s) you entered, press the
key.
C
• To cancel your input and exit Symbolic mode,
select
.
66
Using My Words mode
This mode allows you to preset Chinese words or
phrases so that you can quickly and easily insert
them into your text while you are creating a
message.
Adding a word or phrase onto the My
Words list
1. Select Add word
.
2. Enter a word or phrase using the available
modes and select OK
.
For further details about each mode, see pages
51 to 66.
3. Enter a name to assign to the word you added.
If necessary, press the
characters.
C
key to clear the
4. Select OK
.
The word or phrase is added to the My Words
list.
Using My Words items
1. Choose the current input mode indicator on the
right soft key field when you are creating text.
2. Select My words from the list.
3. Select the word you want from the list.
Alternatively, enter a few letters of the name of
the My Words item you want to find. The item
that most closely matches your input highlights.
You can then select an item.
67
Entering text
4. Press the
key or tap the word you want. The
word is inserted in your text.
Using My Words options
Select a word or phrase from the My Words list and
select Options
.
The following options are available:
Edit phrase: allows you to change the word or
phrase and then the name assigned to the item.
Create phrase: allows you to add a new word or
phrase.
Delete phrase: allows you to delete the item.
When a confirmation message appears, select Yes
.
Select phrase: allows you to insert the word or
phrase to your text.
Using Help mode
On-screen help is available by selecting Help from
the input mode menu. Use the Up and Down keys
or tap the up and down arrows to scroll through the
Help information.
68
Options during a call
Your phone provides a number of control functions
that you can use during a call.
Putting a call on hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if your network supports this
service.
To place a call on hold, simply select Hold. You can
reactivate the call whenever you want by selecting
Unhold
.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Phone book.
For details about searching for a number in
Phone book, see page 43.
2. Press the
The first call is automatically put on hold.
Alternatively,
key to dial the second call.
1. Put the current call on hold by selecting Hold
.
2. Make the second call in the normal way.
69
Options during a call
When you have an active call and a call on hold, you
may switch between the two calls, changing the one
on hold to active and placing the other on hold.
To switch between the two calls, select Swap
.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with that person.
When you want to finish, end each call normally by
pressing the
key.
Using the menu functions
You can access the main menu functions, during a
call.
1. Select Options or press the
select Menu
key and then
.
2. If necessary, scroll through the menu list.
Note: You cannot use some menus during a call.
They are deactivated on this list.
3. Select the menu you want to use.
4. If the selected menu has sub-options, repeat
steps 2 and 3.
For further details about available menu functions,
see the list on page 78.
70
Options during a call
Switching the microphone off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person on the
phone cannot hear you.
Example: You wish to say something to a person in
the room, but do not want the person on
the phone to hear you.
To switch the microphone off temporarily:
1. Select Options or press the
2. Select Mute
key.
.
The Mute icon ( ) displays and the other
person on the phone can no longer hear you.
To switch the microphone back on:
1. Select Options or press the
2. Select Unmute
key.
.
The other person on the phone can hear you
again.
71
Options during a call
Muting or sending DTMF tones
The Mute keys and Send keys options allow you
to turn off and on the key tones. If the Mute keys
option is selected, your phone does not transmit the
DTMF (Dual Tone Multi-Frequency) tones of the
keys, which allows you to press keys without
hearing annoying key tones during a call.
Note: To communicate with answering machines or
computerised telephone systems, the Send
keys option must be selected.
Sending a sequence of DTMF tones
You can send the DTMF tones as a group after
entering the entire number you need to send.
This option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. While connected to the teleservice system,
select Options or press the
key.
2. Select Send DTMF
.
3. Enter the number you want to send and select
OK
.
The tones are sent.
72
Options during a call
Searching for a number in Phone
book
You can search for a number in Phone book during a
call.
1. Select Options or press the
2. Select Phone book
key.
.
The Phone book entries are listed.
3. Enter the name that you wish to find and select
OK
.
If you enter the first few letters of the name, the
Phone book entries are listed starting with the
entry that most closely matches your input.
4. Select the entry you want and select View
.
For further details about the Phone book menu, see
page 36.
Call waiting
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call waiting menu
(Menu 3.3) to Activate; see page 91. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, select Swap
.
73
Options during a call
3. To end the call on hold, select Options or press
the
key and then select End held call.
To end the current call, press the
key.
Making a multi-party call
A multi-party call is a network service that allows
up to six people to take part simultaneously in a
multi-party or conference call. For more information
about subscribing to this service, contact your
service provider.
Setting up the multi-party call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multi-party
call, select Options or press the
select Join
key and then
.
4. To add a new person to the multi-party call, call
the person in the normal way and select
Options or press the
Join
key and then select
.
You can add incoming callers by answering the call,
by selecting Options or press the key and the
selecting the Join option. Repeat as required.
74
Options during a call
Having a private conversation with one
participant
1. Select Options or press the
choose Select one
key and then
.
The list of call participants appears.
2. Select a person from the list and choose Select
.
3. Select Private
.
Now you can talk privately to that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, select Options
and then select Join
.
All the multi-party call participants can now hear
each other.
Dropping one participant
1. Select Options or press the
select Select one
key and then
.
The list of call participants appears.
2. Select a person from the list and choose Select
.
3. Select Remove
.
The call with that participant ends, but you can
continue to talk to the others.
4. When you want to end the multi-party call, close
the phone or press the key.
75
Using the menus
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling or by using the shortcuts.
Accessing a menu function by
scrolling
You can scroll and select a menu function by
tapping items on the touch screen or pressing the
Navigation keys and the associate soft keys.
1. In Idle mode, select Menu to access Menu
mode.
2. Scroll using the Navigation keys to reach a main
menu, Phone settings for example. Select it to
enter the menu.
Note: When you select a main menu, the left soft
key allows you to quickly access its most
popular submenus.
3. If the menu contains submenus, Language for
example, select it.
If the menu that you have selected contains
further options, repeat this step.
4. You can select a menu function as follows:
• To scroll through the menus, tap the up or
down arrow, press the Up or Down key, or
press the Volume keys.
• To confirm the chosen setting, tap the setting
or press the Select soft key or the
key.
76
Using the menus
• To return to the previous menu level, tap
press the soft key or the key.
or
C
• To exit the menu without changing the
settings, press the
key.
Using shortcuts
Menu items, such as menus, sub-menus, and
options, can be accessed quickly by using their
shortcut numbers. For the main menus, you can
access any one of them by pressing the number keys
to ) corresponding to their location on the screen.
(1
9
Press the Menu soft key and enter the number of
the menu you want.
Notes
:
• The numbers assigned to each menu are indicated
on the list on page 78. They may not match the
menu number on the phone, depending on the
services supported by your SIM card.
• For menu number 10, use the
0
key.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
3. Press the
9
5
key for Phone settings
key for Language
.
.
The languages available display.
77
Using the menus
List of menu functions
The following list shows the menu structure and
indicates the number assigned to each option and
the page where you can find a description of each
feature.
1. SIM AT menu* (see page 83)
2. Call records (see page 84)
2.1 Missed calls
2.2 Received calls
2.3 Dialled calls
2.4 Delete all
2.5 Call time
2.5.1 Last call time
2.5.2 Total sent
2.5.3 Total received
2.5.4 Reset timers
2.6 Call cost**
2.6.1 Last call cost
2.6.2 Total cost
2.6.3 Max cost
2.6.4 Reset counters
2.6.5 Set max cost
2.6.6 Price/Unit
3. Network services (see page 88)
3.1 Call diverting
3.1.1 Divert always
3.1.2 Busy
3.1.3 No reply
3.1.4 Unreachable
3.1.5 Cancel all
* May be available only if you use a SIM AT card.
** Shows only if supported by your SIM card.
78
Using the menus
3. Network service (continued)
3.2 Call barring
3.2.1 All outgoing
3.2.2 International
3.2.3 International except to home
3.2.4 All incoming
3.2.5 Incoming while abroad
3.2.6 Cancel all
3.2.7 Change barring password
3.3 Call waiting
3.4 Network selection
3.5 Caller ID
3.6 Closed user group
3.6.1 Index list
3.6.2 Outside access
3.6.3 Default group
3.6.4 Deactivate*
3.7 Band selection
4. Sound settings (see page 96)
4.1 Ring tone
4.2 Ring volume
4.3 Alert type
4.4 Keypad tone
4.5 Message tone
4.5.1 SMS tone
4.5.2 SMS-CB tone
4.5.3 MMS tone
4.5.4 Repetition
4.6 Slider tone
4.7 Power on/off
4.8 Alerts on call
4.9 Extra tones
* Shows only if the Closed user group Feature is active.
79
Using the menus
5. Messages (see page 101)
5.1 Text messages
5.1.1 Create
5.1.2 Inbox
5.1.3 Outbox
5.1.4 Templates
5.1.5 Settings
5.2 Multimedia messages
5.2.1 Create
5.2.2 Inbox
5.2.3 Outbox
5.2.4 Draft
5.2.5 Templates
5.2.6 Settings
5.2.7 MMS profile
5.3 Push message
5.3.1 Inbox
5.3.2 Receive
5.3.3 Delete all
5.4 Delete all
5.4.1 Text messages
5.4.2 Multimedia messages
5.5 Voice mail
5.5.1 Connect to voice server
5.5.2 Voice server number
5.6 Broadcast messages
5.6.1 Read
5.6.2 Receive
5.6.3 Channel list
5.6.4 Language
5.7 Memory status
5.7.1 Text messages
5.7.2 Multimedia messages
80
Using the menus
6. Funbox (see page 125)
6.1 WAP browser
6.1.1 Home
6.1.2 Favorite
6.1.3 http://
6.1.4 Settings
6.1.5 Clear cache
6.2 Fun club
6.2.1 SFC home
6.2.2 Service area
6.3 Games & More
6.4 Paintbrush
6.4.1 Draw memo
6.4.2 Memo list
6.4.3 Delete all
6.4.4 Memory status
6.5 Sounds
6.6 Images
6.7 Delete all
6.8 Memory status
6.8.1 Games
6.8.2 Sounds & Images
7. Organiser (see page 142)
7.1 Alarm
7.1.1 Once
7.1.2 Daily
7.1.3 Morning call
7.1.4 Remove alarm
7.1.5 Autopower
7.2 Calendar
7.3 Time & Date
7.3.1 Set time
7.3.2 Set date
7.3.3 World time
7.3.4 Time format
7.3.5 Date format
7.4 Calculator
7.5 To do list
81
Using the menus
7. Organiser (continued)
7.6 Voice memo
7.6.1 Record voice
7.6.2 Voice list
7.6.3 Delete all
7.6.4 Memory status
7.7 Currency exchange
7.8 Dictionary
8. Camera (see page 156)
8.1 Take photos
8.2 My photos
8.3 Video
8.3.1 Record
8.3.2 Video clips
8.4 Memory status
9. Phone settings (see page 164)
9.1 Activate infrared
9.1.1 With PC
9.1.2 With other phone
9.2 Display settings
9.2.1 Wallpaper
9.2.2 Brightness
9.2.3 Back light
9.2.4 Service light
9.2.5 Graphic logo
9.3 Greeting message
9.4 Own number
9.5 Language
9.6 Security
9.6.1 PIN check
9.6.2 Change PIN
9.6.3 Phone lock
9.6.4 Change password
9.6.5 Privacy
9.6.6 SIM lock
9.6.7 FDN mode*
9.6.8 Change PIN2
*
9.7 Extra settings
9.8 Touch calibration
9.9 Reset settings
* Shows only if supported by your SIM card.
82
SIM AT menu
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services.
Available services may vary, depending on your
service provider’s service plans.
For further details, see your SIM card instructions
or contact your service provider.
83
Call records
In this menu, you can view the:
• calls you missed, received, or dialled.
• length of have your calls.
• cost of your calls, if your SIM card supports it.
Notes
• You can access the numbers in the 3 types of call
records by pressing th ey in Idle mode.
:
e
k
• The number of call records the phone can store may
vary, depending on your SIM card.
Missed calls (Menu 2.1)
This menu lets you view the 20 most recent
numbers of the calls you have received, but did not
answer.
The number or name, if available, displays together
with the time and date the call was received.
To dial the number, press the
key.
You can access the following options by selecting
Options or pressing the key:
Edit: allows you to edit the number and dial it or
save it in Phone book.
Delete: deletes the call from the list.
84
Call records
Received calls (Menu 2.2)
This menu lets you view the 20 most recent
numbers of the calls you have received.
The number or name, if available, displays together
with the time and date the call was received.
To dial the number, press the
key.
You can access the following options by selecting
Options or pressing the key:
Edit: allows you to edit the number and dial it or
save it in Phone book.
Delete: deletes the call from the list.
Dialled calls (Menu 2.3)
This menu lets you view the 20 most recent
numbers you have dialled.
The number or name, if available, displays together
with the time and date the call was made.
To dial the number, press the
key.
You can access the following options by selecting
Options or pressing the key:
Edit: allows you to edit the number and dial it or
save it in Phone book.
Delete: deletes the call from the list.
85
Call records
Delete all (Menu 2.4)
This menu allows you to delete all of the records in
each call type separately. You can also delete all of
your call records at one time.
1. Select a call type to place a check mark. Repeat
this step to select more call types.
You can remove the check mark by selecting it
again.
2. Select Delete to delete the marked records.
3. When a confirmation message displays, select
Yes to confirm.
4. When the phone asks for confirmation again,
select Yes
.
Call time (Menu 2.5)
This menu lets you view the timers for calls you
have made and received.
Note: The actual time invoiced by your service
provider may vary, depending on network
features, rounding-off for billing purposes, and
so on.
The following options are available:
Last call time: shows the length of the last call.
Total sent: shows the total length of all calls you
have made since the timer was last reset.
Total received: shows the total length of all calls
you have received since the timer was last reset.
86
Call records
Reset timers: allows you to reset the call timers.
You must first enter the phone password and then
select OK
.
Note: The password is preset to “00000000.” To
change this password, see page 173.
Call cost (Menu 2.6)
This network feature lets you view the cost of calls.
This menu may not be available, depending on your
SIM card.
The following options are available:
Last call cost: shows the cost of the last call you
made.
Total cost: shows the total cost of all calls you
have made since the cost counter was last reset. If
the total cost exceeds the maximum cost set in the
Set max cost menu, you can no longer make any
calls until you reset the counter.
Max cost: shows the maximum cost set in the Set
max cost menu.
Reset counters: allows you to reset the cost
counter. You must first enter your PIN2 (see
page 182) and then select OK
.
Set max cost: allows you to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 182) and then select OK
.
Price/Unit: allows you to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 182) and then select OK
.
87
Network services
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
Call diverting (Menu 3.1)
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
To set your call diverting options:
1. Select a call diverting option.
The following options are available:
•
•
Divert always: all calls are diverted.
Busy: calls are diverted when you are already
on another call.
•
•
No reply: calls are diverted when you do not
answer the phone.
Unreachable: calls are diverted when you are
not in an area covered by your service
provider or when your phone is switched off.
•
Cancel all: all of the call diverting options are
cancelled.
2. Select the type of calls, voice or data.
The current status displays. If the option has
already been set, the number to which the calls
are diverted displays.
88
Network services
3. To
Select the
activate call diverting Activate option.
Go to step 4.
change the number to Change option.
be called
Go to step 4.
deactivate call
diverting
Remove option.
4. Enter the number to which the calls are to be
diverted and select OK
.
To enter an international code, press and hold
the key until the sign displays.
0
+
5. If you selected No reply in step 1, select the
length of time the network waits for before
diverting a call.
The phone sends your settings to the network
and the network’s acknowledgement displays.
89
Network services
Call barring (Menu 3.2)
The call barring network service allows you to
restrict your calls.
To set your call barring options:
1. Select a call barring option.
The following options are available:
•
•
All outgoing: calls cannot be made.
International: international calls cannot be
made.
•
International except to home: when
abroad, calls can be made only to numbers
within the current country and to your home
country, which is the country where your home
network provider is located.
•
•
All incoming: calls cannot be received.
Incoming while abroad: calls cannot be
received when you are using your phone
outside of your home country.
•
•
Cancel all: all call barring settings are
deactivated; calls can be made and received
normally.
Change barring password: you can set and
change the call barring password obtained
from your service provider.
2. Select the type of calls, voice, or data.
3. Select Activate to confirm your settings.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
90
Network services
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
3. Select Deactivate
.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Call waiting (Menu 3.3)
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice, or data, to which
you want to apply the call waiting option.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by selecting Activate or
Deactivate respectively.
You can also deactivate all call waiting settings by
selecting Cancel all
.
91
Network services
Network selection (Menu 3.4)
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
Note: You can select a network other than your home
network only if there is a valid roaming
agreement between the two.
To automatically or manually select the network to
be used when roaming:
1. Select the appropriate option.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, go to step 2.
2. Select the network you want.
The phone will scan for that network and you
will be connected.
92
Network services
Caller ID (Menu 3.5)
You can prevent your phone number from being
displayed on the phone of the other person being
called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide number: your number does not display on
the other person’s phone.
Send number: your number is sent each time you
make a call.
Closed user group (Menu 3.6)
Closed user group (CUG) is a network service which
allows incoming and outgoing calls to be restricted
to a selected user group. You can create up to 10
user groups.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
For details on how to create and use a closed user
group, contact your service provider.
When you select the Closed user group menu,
you can enter the CUG function. You can access the
following options:
Index list: lets you list, add, or delete CUG index
numbers.
93
Network services
If there is no CUG index stored, you are prompted
to add a new index when you select this option.
Once you have added a CUG index, the list of
current CUG indexes appears.
Add a new CUG index as advised by your service
provider, or delete a group.
To
Select
add a new CUG
index
Options, select the Add
option, and enter the index.
delete a CUG
index
Options and select the
Delete option.
activate a CUG
index
Options and select the
Activate option.
Outside access: lets you enable or disable calls to
numbers other than those in the Closed user group.
This feature depends on the nature of your CUG
subscription. Please check with your service
provider.
Default group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
94
Network services
Band selection (Menu 3.7)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
• Combined GSM 900/1800
• GSM 1900
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
1. Press the Up or Down key until the appropriate
option highlights and select OK
.
2. When the display confirms the network band
you selected, select Yes
.
To cancel the selection, select No
.
When you select a new band, your phone
automatically searches for all of available networks.
Your phone registers with a preferred network
within the band.
95
Sound settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume, and type.
• sounds made when you press a key, receive a
message, open/close the phone, or switch your
phone on/off.
• alert tone made every minute during a call, when
you make an error, or when your call is connected
to the system.
Notes
:
• You can quickly access this menu by pressing the Up
key in Idle mode.
• When the phone is in Silent mode (see page 35), you
cannot change the sound settings.
Ring tone (Menu 4.1)
You can select a ring melody.
You can choose between many different melodies. If
you have downloaded sounds from the Internet or
the optional EasyGPRS programme, you can use
them in this menu.
Ring volume (Menu 4.2)
You can adjust the ring volume to one of the 5
levels.
Press the UP and Down keys or the Volume keys on
the left side of the phone to increase or decrease
the volume.
96
Sound settings
Alert type (Menu 4.3)
You can specify how you are to be informed of
incoming calls.
The following options are available:
Light only: the backlight of the keypad and display
flashes.
Melody: the phone rings using the ring tone
selected in the Ring tone menu.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad tone (Menu 4.4)
You can select a tone type that the phone sounds
when you press a key.
To turn off the sound, select Off
.
97
Sound settings
Message tone (Menu 4.5)
You can select how the phone will inform you that a
new message has been received, and how often it
will happen.
SMS tone (Menu 4.5.1)
The following options are available for alerting you
to new SMS messages:
Off: the phone does not use an SMS tone.
Light only: the backlight of the keypad and display
flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
SMS tone x: the phone uses one of several SMS
tones.
SMS-CB tone (Menu 4.5.2)
The following options are available for alerting you
to new cell broadcast messages:
Off: the phone does not use a CB tone.
Light only: the backlight of the keypad and display
flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
SMS-CB tone x: the phone uses one of several CB
tones.
98
Sound settings
MMS tone (Menu 4.5.3)
The following options are available for alerting you
to new multimedia messages:
Off: the phone does not use an MMS tone.
Light only: the backlight of the keypad and display
flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
MMS tone x: the phone uses one of several MMS
tones.
Repetition (Menu 4.5.4)
In this menu, you can set how often the phone
informs you of a new message.
The following options are available:
Once: The phone alerts you to a new message just
once when you receive an incoming message.
Periodic: The phone alerts you to a new message
every 2 minutes until you open the message.
Slider tone (Menu 4.6)
You can select a tone type that the phone sounds
when you open or close the phone.
To turn off the sound, select Off
.
99
Sound settings
Power on/off (Menu 4.7)
This menu allows you to select a melody that the
phone sounds when it is switched on and off.
To turn off the sound, select Off
.
Alerts on call (Menu 4.8)
You can choose whether or not the phone informs
you when you receive a new message or when the
time for an alarm comes during a call.
Off: the phone doesn’t actively alert you to
incoming messages or alarms. It only displays the
corresponding notification.
On: the phone alerts you with a beep and displays
the corresponding notification.
Extra tones (Menu 4.9)
You can customise additional tones for the phone.
To use a tone, select it to place a check mark. You
can remove the check mark by selecting it again.
The following options are available:
Error tone: sets whether or not the phone informs
you when you make a mistake.
Minute minder: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
Connect tone: sets whether or not your phone
beeps when your call is connected to the system.
100
Messages
Using the Messages menu, you can use various
message features, such as:
• short text messages
• multimedia messages
• WAP push messages
• voice mail
• cell broadcast messages
Text messages (Menu 5.1)
Short Message Service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to include simple pictures,
melodies, and animated images in your messages.
To use this feature, you must subscribe to your
service provider’s message service.
When the Text Message icon (
) appears, you
have received new text messages. If the memory is
full, an error message displays and you cannot
receive any new messages. Use the Delete option
in each message box to delete the obsolete ones.
Note: You can quickly access this menu by tapping
or by pressing the Left key in Idle mode.
101
Messages
Create (Menu 5.1.1)
In this menu, you can write and send a text
message.
Creating a simple text message
1. Create your message.
Note: For further details about how to enter
characters, see page 48.
2. When you finish entering the message, select
Options. The following options are available:
•
Send only: allows you to send the message.
The message is deleted after sending.
•
Save and send: allows you to save a copy of
the message and then send the message. You
can read the message in your Outbox.
•
Save only: allows you to save the message so
that it can be sent later. You can read the
message in your Outbox.
• For further details about Add content
templates Add from phonebook, and Add
from bookmark options, see page 103.
,
Add
,
3. Select Send only or Save and send
.
If you want to just save the message, select
Save only. After saving the message, the phone
returns to the Text messages menu screen.
4. If you select a save option, choose the memory
location.
5. Enter a destination number and select OK
.
The message is sent.
102
Messages
Note: When the phone fails to send the message, it
asks you if you want to retry. Select Yes to
confirm. Otherwise, press the No soft key to
return to the Create screen.
Creating a text message using options
1. Create a message.
2. Press the Options
.
3. Select one of the following options:
•
Add content: allows you to add a sound,
melody, picture, or animated image to the
message. Select the category of the object to
be added. In each category, you can select
from the various factory-set items or items
received from other sources, such as the
Internet or other phones.
Note: When you add media objects to a
message, the number of characters you
can enter decreases.
•
Add templates: allows you to apply one of
the preset message templates to the text.
Select one of 5 items stored in the Templates
box (Menu 5.1.4). For further details, see
page 106.
•
•
Add from phonebook: allows you to add a
Phone book entry to your message. Select one
from the list.
Add from bookmark: allows you to add a
web page’s address stored in your Favorite list.
Select one from the list.
4. Complete the message, and send or save it by
following the procedure from step 2 on
page 102.
103
Messages
Creating a long text message
When you write a text message, the phone
automatically splits it into several messages if your
message exceeds the maximum number of characters
allowed for sending. The number of split messages to
be sent is shown each time your message is split.
Depending on your service provider, the maximum
number of characters may vary.
Inbox (Menu 5.1.2)
This message box is used to store messages that
you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Phone book.
1. Select a message from the list to read the
message contents.
2. Scroll through the contents, if necessary.
3. Press the
or
key to scroll to the previous
or next message.
While reading a message, you can choose the
following options by selecting Options
:
Delete: allows you to delete the message.
Send: allows you to send/resend the message. For
further details, see page 102.
Text reply: allows you to send a reply to the
sender by sending a text message.
Call back: allows you to call the sender.
104
Messages
Save address: allows you to extract the sender’s
number and URL, e-mail addresses, or phone
numbers from the message text.
Move to phone: allows you to move the message
from the SIM card to the phone’s memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a message
stored in the phone’s memory.
Select content: allows you to save media
contents, such as sounds or images, from the
message into your phone. You can use the contents
when writing a message. For details, see page 103.
Outbox (Menu 5.1.3)
This message box is used to store messages that
you have already sent or will send.
When you access this menu, the list of messages in
the box displays with the recipients’ phone numbers
or names, if available in your Phone book.
1. Select a message from the list to read the
message contents.
2. Scroll through the contents, if necessary.
3. Press the
or
key to scroll to the previous
or next message.
105
Messages
While reading a message, you can choose the
following options by selecting Options
:
Delete: allows you to delete the message.
Send: allows you to send/resend the message. For
further details, see page 102.
Save address: allows you to extract the
destination number and URL, e-mail addresses, or
phone numbers from the message text.
Move to phone: allows you to move the message
from the SIM card to the phone’s memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone’s memory.
Select content: allows you to save media
contents, such as sounds or images, from the
message into your phone. You can use the contents
when writing a message. For details, see page 103.
Templates (Menu 5.1.4)
Using this menu, you can preset a maximum of 5
messages that you use most frequently.
Select an empty location or the message template
you want and then Select
.
The following options are available:
Edit: allows you to write a new message template
or edit an existing message template.
Note: For further details about how to enter
characters, see page 48.
106
Messages
Send: allows you to retrieve the message template.
Once you have completed the message, you can
send, save and send, or simply save it. For further
details about how to send a message, see
page 102.
Delete: allows you to delete the message template.
You are asked to confirm the deletion by selecting
Yes
.
Settings (Menu 5.1.5)
In this menu, you can set up default SMS/EMS
information. A setting group is a collection of
settings required to send text messages. The
number of setting groups available depends on the
capacity of your SIM card.
Notes
:
• The setting options available in this menu may vary,
depending on your service provider.
• The last setting you accessed is automatically
activated for sending subsequent messages.
Setting x (where
x
is the setting group number):
each group has its own sub-menu.
Service centre: allows you to store or change the
number of your message centre, which is required
when sending messages. You must obtain this
number from your service provider.
Default destination: allows you to store a default
destination number. The number automatically
displays on the Destination screen when you create
a message.
107
Messages
Default type: allows you to set the default message
type to Text Fax, E-mail, or Paging. The network
,
can convert the messages into the selected format.
Validity period: allows you to set the length of time
your text messages are stored in the message
centre while attempts are made to deliver them.
Setting name: allows you to give a name to the
setting group currently being defined.
Common setting: The following options are
available:
Reply path: allows the recipient of your message to
send you a reply through your message centre, if
your network supports this service.
Delivery reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Bearer selection: allows you to choose either GSM
or GPRS, depending on your network.
108
Messages
Multimedia messages (Menu 5.2)
Multimedia Message Service (MMS) is a service
providing delivery of personal multimedia messages
from phone to phone or from phone to e-mail.
In addition to the familiar text content, multimedia
messages can contain images, audio clips, and
combinations of these things. Images could include
downloads and photos you have taken, while audio
clips could be downloaded or recorded sounds, or
voice memos. Using MMS, your phone can send and
receive these multimedia messages.
This function is available only if it is supported by
your service provider. Only phones that offer
multimedia messaging features can receive and
display multimedia messages.
Note: When you buy media content from the Internet,
this content is delivered to you in MMS
messages. You can retrieve the messages from
the server and then save the items in your
phone’s memory. You cannot forward these
messages to other people or add the saved
items to an MMS message.
Create (Menu 5.2.1)
This menu allows you to create a new multimedia
message and then send it to multiple destinations.
Creating and sending a multimedia message
1. Enter the subject of your message and select
OK
.
For further details about how to enter
characters, see page 48.
109
Messages
2. When Add here highlights, select Options and
add the message contents using one of the
following options:
•
Add text: allows you to enter the message
text.
•
Add photo: allows you to add a photo. You
can take a new photo or select one of photos
saved in your phone’s memory. For further
details about using the camera, see page 156.
•
•
Add picture: allows you to add a picture
stored in the Images folder (Menu 6.6). You
may not be able to add some downloaded
images if they are not in the correct format.
Add sound: allows you to add a sound file.
You can record a new voice memo or select a
sound clip from the Voice list
(Menu 7.6.2)
or Sounds folder (Menu 6.5). For details
about recording voice memos, see page 152.
You may not be able to add some downloaded
sounds if they are not in the correct format.
•
Add paintbrush: allows you to add a memo
made in Paintbrush. You can create a new
memo or select one of the memos stored in
the phone’s memory. For further details, see
page 136.
•
•
Send: allows you to send the message. Use
this option when you finish creating the
message.
Save: saves the message in the Draft (Menu
5.2.4) or Templates box (Menu 5.2.5) for
later use. For further details, see page 118.
110
Messages
•
•
•
Settings: allows you to change the message
settings. For further details about each setting
option, see page 119. After changing the
settings, you need to select
or press the
C
key to go back to the Write options screen.
Add destination: allows you to enter
destination numbers or addresses. See steps 6
to 10. After adding them, you need to select
or press the
C
key to go back to the Write
options screen.
Preview: shows the message you created.
Note: You can add text, an image and a sound
once for each page.
3. Repeat step 2 until you have finished creating
your message.
4. If you want to change the added items, highlight
one and select Options to display the Write
Options list.
Note: Available options are different, depending
on whether the item you select on the
message screen is text, an image, a sound,
or the Page field.
The following options are available:
•
•
Edit text/picture/sound: allows you to
change the text or replace the image or sound
with another one.
Add page: allows you to add up to 5 pages.
After you add a page, the display shows you
the current page number and memory space
used for the page. You can move to each page
using the Left or Right key on the message
screen.
111
Messages
•
•
Delete: deletes the item from your message.
Duration: allows you to set when and how
long text, an image, a sound, or a page
displays on the message presentation screen.
If the duration you set is shorter than the
content duration (for example, the length of
sound clip) for a particular page, the content
duration is automatically decreased.
•
•
Send: allows you to send the message.
Save: saves the message in the Draft (Menu
5.2.4) or Templates box (Menu 5.2.5) for
later use. For further details, see page 118.
•
•
Settings: allows you to change the message
settings. For further details about each setting
option, see page 119.
Add destination: allows you to enter
destination numbers or addresses. See steps 6
to 10. After adding them, you need to select
or press the
C
key to go back to the Write
options screen.
•
Preview: shows the message you created.
5. When you are finished creating the message,
select Send
.
6. Select a destination type (To
,
Cc, or Bcc).
7. Choose one of the following options:
•
•
•
Phone number: allows you to enter the
phone number you want.
E-mail: allows you to enter the e-mail address
of the recipient.
Phone book: allows you to retrieve a number
from your Phone book.
112
Messages
8. Enter a number or an e-mail address and OK
or select a number from Phone book.
,
9. To add a destination, select Add destination
and repeat from step 7.
If you want to edit the destinations, choose the
one you want and then Select. You can change
or delete it.
10. To enter additional numbers or addresses to the
other destination types, select
steps 6 through 10.
and repeat
You can enter up to 10 destinations each for To
,
Cc, and Bcc
.
11. When you are finished entering the
destinations, select Send message
.
Your phone sends the message.
113
Messages
Inbox (Menu 5.2.2)
Viewing a message when you receive it
When a new multimedia message comes in, the
display shows the MMS Message icon (
) and a
text notification along with the message subject.
1. Choose Select to view brief information about
the message, such as the sender’s number, the
message size and the subject.
If you want to view the message later in the
Inbox, select Exit or press the
C
key.
2. Scroll through the message information, if
necessary.
You can access the following options by selecting
Options
:
•
Retrieve: retrieves the message from the
MMS server.
•
•
Delete: deletes the message.
More properties: shows you detailed
information about the message.
3. To read the message, select Retrieve
.
Your phone retrieves the message contents from
the server and displays it.
4. Scroll through the message, if necessary.
5. When you are finished, press the
key.
114
Messages
Viewing a message from the Inbox
When you access the Inbox menu (Menu 5.2.2),
the list of multimedia messages you have received
displays along with the message subjects. The icons
on the left tell you the status of the messages:
•
•
: MMS notifications that have been opened.
: MMS notifications that have not been
opened.
•
: You have sent an enquiry to the MMS server
requesting the message be sent to your
phone.
•
•
: The MMS server is processing your request.
: The MMS server is unable to send the
message to your phone.
•
•
: Messages that have been opened.
: Messages that have not been opened.
To view a message:
1. Select a message on the list.
The phone presents the message and scrolls to
the next page, if it has one, after a specified
time.
2. Press the OK to go to the message view screen.
Or, the display automatically switches to the
screen after a few seconds.
3. Press the Up or Down key to scroll through the
message.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
115
Messages
4. Press the
or
key to scroll to the previous
or next message.
While viewing a message, you can choose the
Message options by selecting Options
.
If you are viewing a new message, the options are
the same as when you view a message at the time
of its receipt. See page 114.
When you are reviewing a message retrieved from
the MMS server, the following options are available:
Delete: allows you to delete the message.
Reply: allows you to send a reply to the sender by
sending a text or multimedia message.
Callback: allows you to call the sender.
Save address: allows you to extract the sender’s
number or e-mail address and URL, e-mail
addresses, or phone numbers from the message
text.
Forward: allows you to forward the message to
another person. When the message contains media
contents you have bought on the Internet,
forwarding is not available.
Save picture: allows you to save an image from
the message into your phone. Pictures are stored in
the Images folder (Menu 6.6).
Save sound: allows you to save a sound from the
message into the Sounds folder (Menu 6.5).
Properties: shows you information about the
message, such as the message status, subject,
sender’s e-mail address or phone number, message
size, priority, and the time and date the message
was received.
116
Messages
Outbox (Menu 5.2.3)
When you access this menu, the list of the
multimedia messages you have sent displays. The
icons on the left tell you the status of the messages.
•
•
•
•
: Messages currently being sent.
: Messages sent.
: Messages your phone couldn’t send.
: Messages to be sent.
To view a message:
1. Select a message on the list.
The phone presents the message and scrolls to
the next page, if it has one, after a specified
time.
2. Select OK to go to the message view screen.
Or, the display automatically switches to the
screen after a few seconds.
3. Press the Up or Down key to scroll through the
message.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
4. Press the
or
key to scroll to the previous
or next message.
117
Messages
While viewing a message, you can choose the
following options by selecting Options
:
Delete: allows you to delete the message.
Save address: allows you to extract the
destination numbers or e-mail addresses and URL,
e-mail addresses, or phone numbers from the
message text.
Send: allows you to send/resend the message.
Edit: allows you to change the message contents,
sound, picture, or text.
Properties: shows you information about the
message, such as the message status, subject,
sender and recipients’ e-mail addresses or phone
numbers, message size, priority, and the time and
date the message was sent.
Draft (Menu 5.2.4)
After creating a multimedia message, you can store
it in this message box for later sending.
For further details about viewing a message, see
“Outbox” on page 117.
Templates (Menu 5.2.5)
This menu stores messages you have saved as
templates so that you can use them to make new
messages.
Select a message template from the list. The phone
presents the message. To scroll to the previous or
next messages template, press the
or
key.
118
Messages
Select OK to access the following options, or the
display automatically shows the options after a
specified time:
Edit: allows you to send a message using the
template. For further details about how to send a
message, see page 109.
Delete: allows you to delete the message template.
You are asked to confirm the deletion by selecting
Yes
.
Settings (Menu 5.2.6)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery report: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto download: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications.
Off: you need to manually download new messages
by using the Retrieve option.
On: the phone automatically retrieves new
messages from the server. As soon as you receive a
message you can use more options while you are
reading. See page 114 for details about the options.
Off when roaming: the phone automatically
downloads new messages unless you are roaming
on another network or in another country.
119
Messages
Message acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Validity period: you can select the length of time
your messages are stored in the message centre
after they are sent.
Delivery time: you can set a delay time before the
phone sends your messages.
Priority: you can select the priority level of your
messages.
Report allowed: when this option is enabled, the
sender of an incoming message receives a delivery
report from the network.
Page duration: you can set the length of time one
page of an outgoing message displays on the
message presentation screen. After a specified
time, the display automatically scrolls to the next
page.
MMS profile (Menu 5.2.7)
In this menu, you can configure various network
settings that are required when you send or receive
multimedia messages.
Notes
:
• The last profile you accessed is automatically
activated for sending subsequent messages.
• If you change the MMS settings without first
checking with your service provider, the MMS feature
may not work properly.
120
Messages
The following options are available for each profile:
Profile name: enter a name that you wish to
assign to the MMS server.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-secure
.
IP address: enter the gateway address required to
connect to the MMS server.
User name: enter the user ID required to connect
to the MMS server.
Password: enter the password required to connect
to the MMS server.
APN: enter the access point name used for the
address of the MMS server.
For further details, contact your service provider.
Push message (Menu 5.3)
In this menu, you can receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages received
from the web server.
Receive: allows you to set whether or not your
phone receives web messages. Select Always to
receive web messages, or Never to reject web
messages.
Delete all: allows you to delete all of the web
messages.
121
Messages
Delete all (Menu 5.4)
You can delete all of the messages in each message
box. You can also delete all of your messages at one
time.
1. Select a message type.
2. Select a message box to place a check mark.
Repeat this step to select more boxes to be
cleared.
You can remove the check mark by selecting the
box again.
3. Select Delete to delete the marked messages.
4. When a confirmation message displays, select
Yes to confirm.
5. When the display asks for confirmation again,
select Yes
.
Voice mail (Menu 5.5)
This menu allows you to access your voice mail box,
if your network supports this service.
The following options are available:
Connect to voice server: before using the Voice
Mail feature, you must enter the voice server
number obtained from your service provider. You
can then select this option to listen to your voice
messages.
You can quickly connect to the voice server by
pressing and holding the
1
key in Idle mode.
122
Messages
Voice server number: allows you to change the
voice mail server number, if necessary.
Note: Voice Mail is a network feature. Please contact
your service provider for further details.
Broadcast messages (Menu 5.6)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic.
Cell Broadcast (CB) messages display as soon as
they are received, provided that:
• the phone is in Idle mode.
• the Receive option is set to Enable
.
• the message channel is currently active on the
channel list.
The following options are available:
Read: lets you view the received messages.
The Volatile box displays messages from the
network, but loses its contents as soon as the
phone is switched off. Scroll through the message
by using the Up and Down keys.
You can save a CB message in the Archive box for
later retrieval. When a text notification appears,
select Options and then select Save
.
Receive: allows you to enable or disable the
reception of broadcast messages.
123
Messages
Channel list: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
Select: use to enable or disable channels on the list
by marking or unmarking them, respectively. A
check mark displays in front of each selected
channel.
Add channel: use to enter the ID and title for a new
channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing
channel.
Language: allows you to select your preferred
language in which to display cell broadcast
messages.
Please contact your service provider for further
details.
Memory status (Menu 5.7)
You can check the amount of the memory being
used and the memory remaining for messages.
The following options are available:
Text messages: shows the number of messages
currently stored and the total number of messages
you can store in the SIM, Phone, and Broadcast
memories.
Multimedia messages: shows the total space,
including the free and used space, and how much
space is currently occupied by each message box.
124
Funbox
The Funbox menu contains several fun options.
WAP browser (Menu 6.1)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access
and navigate the Wireless Web using your phone.
Home (Menu 6.1.1)
Selecting this menu connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press and hold
the
key in Idle mode to launch the browser.
The contents of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the Up and Down
keys.
Note: To go to the startup homepage from any other
screen in the WAP browser, use the Home
option. For further details about the WAP
Browser menu options, see page 127.
Exiting the WAP browser
To exit the browser at any time, simply press and
hold the
key.
125
Funbox
Navigating the WAP browse
r
To
Press the
Up or Down key.
scroll through
browser items
select a browser OK soft key.
item
return to the
previous page
Back soft key or the
C
key.
return to the
startup
homepage
key for more than 2 seconds
and select the Home option.
For further details about this
option, see page 127.
Entering text in the WAP browser
When you are prompted to enter text, the currently
active text input mode is indicated on the screen. To
change the text input mode, press the
more times.
key one or
The following modes are available:
Upper-case character mode
(A): allows you to
enter upper-case English characters.
Lower-case character mode ): allows you to
(a
enter lower-case English characters.
Note: You can also enter special characters in Upper-
case or Lower-case Character mode. For details
about available characters, see page 64.
T9 mode
characters by pressing one key per letter. In this
mode, you can use only the key to display
alternative words. To change case, press the
(T9): allows you to enter English
0
key.
Number mode ): allows you to enter numbers.
(1
126
Funbox
Selecting and using browser menu options
Various menu options are available when you are
using the WAP browser to navigate the Wireless
Web.
To access a menu option:
1. Press and hold the
A menu list displays.
key.
2. Highlight a menu by pressing the Up or Down
key.
3. Select an option by pressing the Select soft key
or the
key.
4. If necessary, select a secondary option using the
Up and Down keys, and press the Select soft
key or the
key to confirm.
Note: The menus may vary, depending on your
version of the WAP browser.
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the home
page of the Wireless Web service provider.
Go to URL: allows you to manually enter the URL
address of a web page. After entering an address,
press the OK soft key to go there directly.
Show URL: displays the URL address of the Web
page to which you are currently connected. It also
enables you to set the current site as the startup
home page.
127
Funbox
To
Press the
set the current
page as your
Options soft key and select
the Save to Home option.
startup home page
set a bookmark for Options soft key and select
the current page
the Save to Bookmark
option.
cancel your setting Back soft key.
Edit home: allows you to change the startup home
page manually. Enter the URL and press the OK soft
key. For further details about entering text, see
page 48.
Clear cache: deletes the information stored in the
cache. The cache stores the most recently accessed
Web pages.
Inbox: allows you to read messages received from
the web server.
Favorite (Menu 6.1.2)
This menu allows you to store the URL addresses of
up to ten of your favourite web sites. You can
access this menu directly by pressing and holding
the
key while using the WAP browser.
To store your favourite web site:
1. Select an empty location.
2. Enter the address you want to store and select
Enter
.
For further details about how to enter
characters, see page 48.
3. Enter a name for the item and select Enter
.
128
Funbox
After saving an item, you can access the following
options when you select Options
:
Go to URL: takes you to the corresponding web
site.
Edit: allows you to change the address and the
name of the item.
Delete: allows you to delete the item.
http:// (Menu 6.1.3)
You can manually enter the URL address of the a
web site that you wish to access.
After entering an address, select Enter to access
the associated site.
For further details about how to enter characters,
see page 48.
Settings (Menu 6.1.4)
You can set up 6 proxy servers for the WAP browser.
Contact your service provider for details about your
Settings options.
Note: The availability of the setting options may vary,
depending on your country.
For each server, the following options are available:
Profile name: enter a name that you wish to
assign to the HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays,
you can delete it using the
own choice.
C
key and enter your
129
Funbox
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-secure
.
Bearer: select a bearer to be used for each type of
network address accessed; GPRS or Data
.
The remaining options depend on the Bearer
setting.
When the bearer is set to GPRS
:
IP address: enter the WAP gateway address
required to connect to the Internet.
User name: enter the user ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data
:
IP address: enter the WAP gateway address
required to connect to the Internet.
Login name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up number: enter the PPP server phone
number.
Data call type: select a data call type; Analogue
or ISDN
.
Note: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
130
Funbox
Clear cache (Menu 6.1.5)
You can clear the information stored in the cache,
the phone’s temporary memory in which the most
recently accessed Web pages are stored.
Fun club (Menu 6.2)
You can access Samsung Fun Club (SFC) on the
wireless web and download a variety of media
items, such as melodies and images.
Note: You can quickly access Samsung Fun Club by
pressing the
key in Idle mode and then
selecting Fun club
.
Samsung Fun Club is the preset web site providing
Samsung phone users with attractive download
services.
You can download:
• images and ring tones via SMS.
• 4-level grayscale and colour images from WAP.
• 64-polyphonic melodies from WAP.
• customer services.
• information and electronic catalogues for
Samsung Electronics products.
131
Funbox
SFC home (Menu 6.2.1)
In this menu, you can access the Samsung Fun Club
homepage.
Note: Before accessing Samsung Fun Club for the first
time, please connect to your service provider’s
WAP homepage first. Then reconnects to
Samsung Fun Club. This service requires WAP
subscription and is unavailable depending on
your local system and services.
Service area (Menu 6.2.2)
Each time you move to HongKong or China, you
need to change this setting to use the SFC service,
according to the area where you are. You can
choose either China or China HK
.
For further details about this service, contact your
service provider.
132
Funbox
Games & More (Menu 6.3)
You can enjoy the Match Match game, which is a
touch game, and Java applications.
Note: You can download java applications from the
WAP browser. Java services may not be
available depending on your service provider.
When you access the Games & More menu, the list
of default games appears. Once you have
downloaded games, they are added to the list.
Launching the Match Match game
You can enjoy the Match Match game, which is a
touch game.
The object of this game is to find all of matching
pairs of cards as quickly as possible. Your score will
increase based on speed and accuracy. Have a fun
time and improve your memory skill.
To start a game:
1. Select Match Match
.
On the startup screen of the game, the following
options are available:
•
•
•
New game: starts a new game.
High score: shows the 5 highest scores.
Setting: allows you to select the time limit for
one game and select the theme of the card.
•
Help: opens the help screen.
2. Select New game
.
133
Funbox
3. Select two of the cards by tapping on the card.
If both cards are the same, those cards will stay
flipped over. If they are different, remember
what is on the card so you can try again. After a
few seconds, they will return to their face down
position.
4. Select more cards.
The game is over when you have matched all of
the pairs and all the cards are flipped over. Then
you can continue the game at the next level.
Notes
:
• You can pause the game by pressing the
resume, tap anywhere on the screen.
C
key. To
• To exit the current game, tap
screen.
X
on the bottom of the
Launching a Java game
Notes
:
• The following procedure is for the default games. For
downloaded games, the procedure may be different.
• While playing a Java game, you are unable to use the
touch screen.
1. Select BubbleSmile or MobileChess on the
game list.
2. On the startup screen of the MIDlet, scroll to an
option using the Navigation keys or the
and keys.
2,
4,
6,
8
The following options are available:
•
•
START GAME: starts a new game.
CONTINUE: allows you to continue the last
game you played, if you were interrupted
during the game.
134
Funbox
•
HIGH SCORE: shows the high score table.
This option may not be available for some
games.
•
•
HOW TO PLAY: shows how to play the game
and the key functions for the game.
OPTION: allows you to switch the game
sound on or off.
3. Press the
selection.
5
key or the
key to confirm your
While you are playing a Press the
game, to
adjust the sound volume
Volume keys.
C key.
stop the game and return
to the startup screen
exit the game
key.
Viewing MIDlet Information
1. Scroll to the MIDlet you want on the game list
and select Info
.
The display shows information about the MIDlet,
such as the file size, application version, and its
vendor.
2. Press the Navigation keys to scroll to other
MIDlet information.
3. If you want to delete the MIDlet, select Delete
and then select Yes to confirm the deletion.
Note: When you select default games from the
list, the Delete option is not available.
4. To exit and return to the game list, select
.
135
Funbox
Entering text
If you need to enter text while using a MIDlet, you
can use the following input modes:
Upper-case character mode
(A): allows you to
enter upper-case English characters.
Lower-case character mode ): allows you to
(a
enter lower-case English characters.
Number mode ): allows you to enter numbers.
(1
Symbol mode: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation
keys, press the OK soft key or the
key to insert
it.
T9 mode
(T9): allows you to enter English
characters by pressing one key per letter. In this
mode, you can change the case by pressing the
key.
0
To change the text input mode, press the
until the appropriate indicator appears.
key
Paintbrush (Menu 6.4)
In this menu, you can make a memo by drawing a
sketch using the stylus pen on the touch screen
yourself.
Note: You can quickly access this menu by tapping
in Idle mode.
Draw memo (Menu 6.4.1)
This menu allows you to make a new memo. When
you access this menu, an empty memo screen
appears.
136
Funbox
1. Draw a sketch using the stylus pen on the screen.
Draw memo
You can use the following tools at the bottom
line of the screen:
Tool Function
Clears your drawing on the screen.
Erases the drawing as you move the
stylus.
Cancels you last action.
Opens the line picker screen so that you
can change the line thickness.
Opens the colour picker screen so that
you can change the colour of the line.
Allows you to set a photo as a
background image for the Draw memo
screen.
2. When you are finished, select Save to save the
memo.
3. If necessary, clear the default name using the
key.
C
137
Funbox
4. Enter a memo name and press OK
.
For further details about how to enter
characters, see page 48.
5. After saving the memo, choose one of the
following options:
• Select New to create a new memo.
• Select Options to access the memo options.
For further details about the options, see
below.
Memo list (Menu 6.4.2)
You can review your sketch memos. The display
shows the memos in Thumbnail mode.
To view a memo on the full screen, select View. To
return to Thumbnail mode, select Multi
.
On the memo list, select Options to access the
following options:
Send: allows you to send the memo as a part of a
multimedia message. For further details, see page
page 109.
Set as wallpaper: allows you to set the memo as
your wallpaper for the idle screen.
Protection: allows you to protect the memo from
being deleted.
Delete: allows you to delete the memo.
Delete all: allows you to delete all memos.
Rename: allows you to change the memo name.
Edit: allows you to edit the memo.
138
Funbox
Properties: shows you information about the
memo, such as the title, the time and date it was
saved, image size, protection status, and file size.
Delete all (Menu 6.4.3)
In this menu, you can delete all memos. When a
confirmation message appears, select Yes
Otherwise, select No. When the phone asks for
confirmation again, select Yes
.
.
Memory status (Menu 6.4.4)
In this menu, you can check the percentage of the
memory being used and the remaining memory for
memos, including the number of memos you have
stored and the total number of memos you can
store.
Sounds (Menu 6.5)
In this menu, you can listen to the sounds
downloaded from the web server or received in
multimedia messages. You can set the downloaded
sounds as the current ring tone.
Scroll to the sound you want to listen and press the
Play soft key or the
key.
By selecting Options, you can access the following
options:
Rename: allows you to change the name of the
sound.
Delete: allows you to delete the sound.
Set as ringtone: allows you to set the sound as
your ring tone.
139
Funbox
Images (Menu 6.6)
In this menu, you can view the images downloaded
from the web server or received in messages. You
can set the downloaded pictures as the current
background image. If you set a photo or a memo
made in Paintbrush as your wallpaper, it is
designated as My photo. icn on the list.
Scroll to the photo you want to view and press the
View soft key or the
key.
By selecting Options, you can access the following
options:
Rename: allows you to change the name of the
image.
Delete: allows you to deletes the image.
Set as wallpaper: allows you to set the image as
your wallpaper.
Delete all (Menu 6.7)
This menu allows you to delete all of the
downloaded contents in the Games Sounds, and
,
Images folders. You can delete all of the contents
at one time.
1. To
select a folder to
Press the
Up or Down key. To
clear
delete all of your items,
select All
.
place or remove a
check mark
key.
140
Funbox
2. Press the Delete soft key to delete the marked
item.
3. When a confirmation message displays, press
the Yes soft key or
key to confirm.
4. When the phone asks for confirmation again,
press the Yes soft key or
key.
Memory status (Menu 6.8)
You can check the memory being used and the
memory remaining for games, sounds, and images.
The following options are available:
Games: the display shows the percentage of the
free and used space for games, as well as the
number of the games you have downloaded.
Sounds & Images: the display shows the
percentage of the free and used space, including
the memory status used for items in the Sounds
and Images menus. You can also view the number
of sounds and images you have stored and the total
number of sounds and images you can store.
141
Organiser
The Organiser feature enables you to:
• set an alarm so that the phone rings at a specific
time, for example, to remind you of an
appointment.
• view the calendar and organise your schedule.
• set the current time and date.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
• define a list of things to do.
• record voice memos.
• use a Chinese-English or English-Chinese
dictionary.
Alarm (Menu 7.1)
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring
the alarm, even if the phone is switched off.
The following options are available:
Once: the alarm rings just once and is then
deactivated.
Daily: the alarm rings every day at the same time.
Morning call: the alarm rings to wake you up in
the morning.
142
Organiser
To set an alarm:
1. Choose the type of alarm to be set.
2. Enter the time for the alarm to sound and tap
OK
.
Note: Your phone is preset to a 24-hour format. To
change the format, see page 147.
If you want to access the alarm options, select
Options. The following options are available:
•
Remove alarm: deactivates the current
alarm.
•
Alarm sound set: allows you to select the
alarm melody.
3. If applicable, select AM or PM
.
4. If you select Morning call in step 1, choose the
repeat option, Monday to friday or Monday to
saturday
.
To stop the alarm when it rings, select
any key.
or press
Remove alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable, the
alarm rings at the specified time, even if the phone
is switched off.
If the option is set to Disable and the phone is
switched off at the specified time, the alarm does
not ring.
143
Organiser
Calendar (Menu 7.2)
With the Calendar feature, you can:
• consult the calendar and check your memos.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder.
Consulting the calendar
When you select the Calendar menu, the calendar
with today’s date highlighted displays. On the
bottom line, the date in the lunar calendar appears.
The following options are available when you select
Options
:
Search all: displays all of the memos, starting with
the oldest, regardless of the day.
Delete all: allows you to delete all of the memos.
You are asked to confirm your action.
Go to date: allows you to go to a specific date.
Exit: exits the Calendar feature and returns to Idle
mode.
Writing a memo
You can make up to 100 memos for the calendar.
More than one memo can be made for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar.
Note: To skip to the previous or next month, press
the Volume keys on the left side of the
phone.
144
Organiser
An empty memo screen displays allowing you to
enter your memo.
2. Enter your memo and then select OK
.
Note: For further details about how to enter
characters, see page 48.
You are asked if you wish to set an alarm.
3. If you want an alarm to ring on the chosen day,
select Yes. Continue the next steps.
Otherwise, select No. The memo is saved and
the display returns to the calendar.
4. Enter the time for the alarm and tap OK
.
Note: Your phone is preset to a 24-hour format. To
change the format, see page 147.
You can also select the melody for the alarm by
selecting Melody
.
5. If applicable, select AM or PM
.
The colour of the date on the calendar changes
to orange to indicate that a memo exists for that
date.
When the time for an alarm comes and the phone is
ringing the selected alarm melody, select View or
press the
or
key to read the associated
memo. Alternatively, select
key to stop the alarm.
or press the
C
or
145
Organiser
Viewing a memo
When you select a day on which more than one
memo already exists, the latest memo for the day
displays.
In that case, press the Up or Down key or tap the
left or right arrow to scroll to the previous or next
memo.
You can access the following options by selecting
Options
:
New: allows you to add a new memo.
Edit: allows you to change the memo text.
Alarm: allows you to set an alarm to ring at a
specified time to remind you of the memo. If you
have already set an alarm for that memo, you can
change or delete the alarm.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date.
Move to: allows you to change the date of the
memo.
Send via IrDA: allows you to send the memo to
another phone via the infrared port. For details, see
page 167.
146
Organiser
Time & Date (Menu 7.3)
You can change the current time and date
displayed. You can also find out what time it is in
another part of the world.
The following options are available:
Set time: allows you to enter the current time.
Note: Before setting the time, you must specify your
time zone in the World time menu.
Set date: allows you to enter the day, month, and
year.
World time: allows you to find out what time it is
in another part of the world.
The screen shows the:
• city name, the time difference between the
selected city and your time zone, and the current
time and date.
• city selected as your time zone and the current
time and date.
To select your time zone:
1. Scroll to the city corresponding to your time
zone using the Left or Right key.
The local time and date display.
2. Select Set
.
Time format: allows you to change the time
format to 24 hours or 12 hours
.
Date format: allows you to change the date
format.
147
Organiser
Calculator (Menu 7.4)
With this feature, you can use the phone as a
calculator.
Using the basic calculator
When you select the Calculator menu, your phone
displays a basic calculator which allows the basic
arithmetic functions; addition, subtraction,
multiplication, and division.
1. Enter the first number.
Notes
• To move the cursor to the left or right, press the
or key.
:
• To include a decimal point or bracket, press the
left soft key until the symbol you want displays.
2. Tap the appropriate arithmetic symbol you want.
3. Enter the second number.
4. To view the result, tap
=.
5. Repeat step 1 to 4 as many times as required.
Using the advanced calculator
To use the advanced calculator, tap (
Calculator screen.
) on the
148
Organiser
The advanced calculator provides you with scientific
calculations using trigonometric functions,
logarithms, and factorials, as well as the 4 basic
arithmetic functions.
changes the format of the calculator
to binary, octonal, decimal, or
hexadecimal.
selects or enters various scientific
calculation factors.
clears your input forward.
clears your input backward.
shows the result of your calculation.
switches to the basic calculator
screen.
clears the last number you entered.
clears any value stored in the
calculator’s memory.
retrieves the stored value from the
calculator’s memory.
saves the current value in the
calculator’s memory.
adds the current value to the value
stored in the calculator’s memory, and
then saves the result in the memory.
moves the cursor to the left/right/up/
down. Pressing any of these keys with
the result displayed shows the
expression of your calculation.
exits the calculator.
149
Organiser
To do list (Menu 7.5)
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status.
Creating the To do list
1. Select New
.
2. Enter the first task.
Note: For further details about how to enter
characters see page 48
3. Select OK
4. Select a priority level of high, normal, or low.
.
.
5. Enter your deadline and tap OK
.
If you don’t want to set the deadline, select
Skip
.
Editing the To do list
When you select the To do list menu, the tasks
display with a check mark, if a task has been done,
and its priority level indicator;
Normal, and for Low.
for High,
for
Note: You can change the status of a specific task,
press the key. The task is marked as
completed as of the current time and date.
150
Organiser
Select it from the list to view the details for a task.
You can scroll to other task by pressing the Up or
Down key or tapping the left or right arrow.
By selecting Options on the list or the task view,
you can access the following options:
New: allows you to create a new task.
Mark: allows you to change the status of a task.
Select the appropriate status (Done or Undo).
Edit: allows you to edit a task. You can change the
text, priority, and/or deadline for the task.
Sort: allows you to sort the existing tasks by
priority or status. Select the sort criterion (High
Low Done, or Undo).
,
,
Copy: allows you to copy a task.
Copy to calendar: allows you to copy a task to the
calendar as a memo. You can also change the text
and deadline for the task and/or set the alarm.
Delete: deletes a task.
Delete all: allows you to delete all tasks.
Exit: exits the To do list menu.
151
Organiser
Voice memo (Menu 7.6)
In this menu, you can record voice memos. After
recording, you can send a memo to other people via
Multimedia Message Service (MMS).
Note: You can quickly access this menu by pressing
the Right soft key in Idle mode.
Record voice (Menu 7.6.1)
You can record a new memo. When you select this
menu, the display shows a 30-second timer.
1. To start recording, select Record
.
2. Record a memo by speaking into the
microphone.
3. When you select Stop or if the recording time
goes off, the following options display:
•
•
Replay: plays back your memo.
Re-record: discards the memo and enables
you to record another one.
•
•
Save: allows you to save the memo.
Quit: cancels your recording and exits the
Record voice menu.
4. To save the memo, select Save
.
5. Press the key to clear the default name, if
C
necessary, and enter a name for the memo.
For further details about how to enter
characters, see page 48.
152
Organiser
6. When you are finished, select OK
.
The memo is saved and then the display shows
the memo information.
After saving, the phone displays the information
about the memo. Select Options to access the
following memo options:
Send: allows you to send the memo to other people
by using the MMS feature. Follow the procedure on
page 109.
Rename: allows you to change the memo’s name.
Delete: allows you to delete the memo.
Voice list (Menu 7.6.2)
This menu shows a list of saved voice memos.
Select a memo or select Options to access the
following options:
Play: plays the memo.
Send: allows you to send the memo to other people
by using the MMS feature. See page 109 for further
details about sending a message.
Rename: allows you to change the memo’s name.
Properties: displays information about the memo,
such as the name, the date the memo was made,
recording duration, and memory size.
Delete: allows you to delete the memo.
153
Organiser
Delete all (Menu 7.6.3)
In this menu, you can delete all of your voice
memos.
When the confirmation message appears, select
Yes. When the display asks for your confirmation
again, select Yes
.
Memory status (Menu 7.6.4)
In this menu, you can check the number of memos
you have recorded and the total number of memos
you can record.
Currency exchange (Menu 7.7)
Using this menu, you can figure out currency
conversions.
1. Enter the current exchange rate of your source
currency and select OK
.
You can insert a decimal point by pressing the
key
.
2. Enter the amount to convert and select OK
.
The amount you entered and its equivalent
value display.
3. Select
convertor.
or press the
C
key to exit the currency
154
Organiser
Dictionary (Menu 7.8)
Your phone provides you with an English-Chinese or
Chinese-English dictionary.
Each dictionary supports both simplified Chinese
and traditional Chinese.
Note: You can quickly open the Dictionary screen by
tapping
in Idle mode.
To look for a word from the dictionary:
1. Select Input
.
2. Enter the Chinese or English word you want to
look up.
For further details about how to enter
characters, see page 48.
3. Select OK
.
The displays shows the pronunciation of the
associated word you entered and the
corresponding English or Chinese words.
If you entered an English word, you can view the
word in simplified Chinese or traditional Chinese
by tapping
T
or
S
on the right of the input field.
4. To look up another word, repeat from step 1.
155
Camera
Using the camera module in your phone, you can
take photos of people or events while on the move.
Additionally, you can send photos to other people in
a multimedia message or set it as a wallpaper or as
a caller ID image for a Phone book entry.
You can also record videos using your phone as a
camcorder.
Note: In Idle mode, you can quickly enter the
Camera menu by pressing the Down key.
CAUTION
:
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are not
allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Take photos (Menu 8.1)
You can take photos. Your camera produces JPEG
photos.
Note
:
• When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
• Depending on the currently selected camera mode,
available options may vary.
1. Accessing the Take photos menu turns on the
camera on the top left of your phone. You can
also press and hold the Down key in Idle mode.
The image to be captured appears on the
display.
156
Camera
2. Adjust the image by rotating the camera module
and aiming it at the subject.
You can access the camera options by selecting
Options. For details of each option, see the
following page.
You can change the image settings or the
camera mode by using the keypad. For details,
see page 159.
3. Select Take to take the photo.
4. Select Save to save the photo.
To discard the photo, select
.
5. If necessary, clear the default name using the
key.
C
6. Enter a photo name and select OK
.
For further details about how to enter
characters, see page 48.
7. Choose one of the following options:
• To use the photo options, select Options. For
details, see page 160.
• To returnto Previewmode, selectPreview
.
157
Camera
Using the camera options
In Preview mode, you can access various options
for the camera by selecting Options
.
The following options are available:
Effects: allows you to change the colour tone or
apply a special effect to the photo.
Frames: allows you to use a decorated frame.
Select a frame from the list using the Navigation
keys.
Multi shot: allows you to take a series of action
stills. Select the capture speed to High speed or
Normal speed and the number of photos for the
camera to take. When you select Take in Preview
mode, the camera takes photos successively.
After taking photos, select Save all to save all of
them. To save the selected one(s), scroll to the
photo you want and select Select to place a check
mark. Repeat to select more photos and then select
Save
.
Rotation: allows you to rotate the photo. You can
flip the photo vertically, see its mirror image, or do
both at the same time.
Self timer: allows you to set a time delay before
the camera takes the photo. Select the length of
delay you want. When you select Take in Preview
mode, the camera takes the photo after the
specified time.
Photo size: allows you to select the image size.
The selected image size displays on the preview
screen.
Photo quality: allows you to select the image
quality. The selected quality displays on the preview
screen.
158
Camera
Using the keypad in Preview mode
You can use the keypad to customise your camera
settings when you are in Preview mode.
Key
Function
Zooms in or out.
Note: When you set the photo size to the
highest setting, 640x480, you are
not able to zoom in or out the image.
Adjusts the image brightness.
Flips the image vertically.
Shows the mirror image.
Switches to Record mode
Changes the image size.
1
2
3
4
5
Changes the image quality.
Changes the camera shot mode.
Changes the colour tone or applies a
special effect to the photo.
6
7
8
9
Changes the display size.
Selects the decorated frame.
Sets the self timer.
Switches to the My photos menu (Menu
8.2).
159
Camera
My photos (Menu 8.2)
This menu allows you to review your photos.
When you access this menu, your phone displays
the photos in Thumbnail mode, which shows them
as small images.
To view the photos on the full screen, select View
.
To go back to Thumbnail mode, select Multi
.
Select Options to access the following photo
options:
Send: allows you to send the photo as a part of a
multimedia message. For further details, see
page 109.
Set as wallpaper: allows you to set the photo as
your wallpaper on the idle screen.
Set as caller ID: allows you to set the photo as a
caller ID image for a Phone book entry.
Protection: allows you to protect the photo from
being deleted.
Delete: allows you to delete the photo.
Delete all: allows you to delete all of the photos
saved in your phone.
Rename: allows you to change the name of the
photo.
Edit: allows you to change the color tone of the
photo or apply a special effect on the photo.
Properties: shows the properties of the photo,
such as the file name, the time and date it was
taken, photo size, photo quality, protection status,
and file size.
160
Camera
Video (Menu 8.3)
You can record and play videos using your phone as
a camcorder.
Record (Menu 8.3.1)
In this menu, you can record a new video.
1. When the camera turns on, adjust the image by
aiming the camera at the subject.
You can use the keypad to change the image
settings or change the camera mode:
Key
Function
/
/
Zooms in or out.
Adjusts the image brightness.
Flips the image vertically.
Shows the mirror image.
Switches to Capture mode.
1
6
Changes the display size. You can
also select Small or Large on the
display.
9
Switches to the Video clips menu
(Menu 8.3.2).
2. Select Record to start recording.
3. When you are finished, select Stop to stop
recording.
The phone will automatically stop if the
recording time expires.
161
Camera
4. If necessary, clear the default name using the
key.
C
5. Enter a name for the video and select OK
.
The phone saves the video clip and then returns
to Preview mode.
Video clips (Menu 8.3.2)
When you access this menu, the thumbnail images
of your videos display.
To play a video:
1. Select the video you want to review.
2. Select Play to start playing the video.
3. To pause the playing, select Pause. To resume,
select Play
.
4. To stop playing, press the
C
key or the
key.
Select Options on the video list to access the
following video options:
Rename: allows you to change the name of the
video clip.
Delete: allows you to delete the current video clip.
Delete all: allows you to delete all of your video
clip.
Protection: allows you to protect the video clip
from being deleted.
Properties: shows the properties of the video clip,
such as the file name, the time and date it was
recorded, video size, protection status, and file size.
162
Phone settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone settings
menu.
Activate infrared (Menu 9.1)
This feature allows you to send or receive data to or
from IrDA-compatible computers or phones through
the infrared port.
With PC (Menu 9.1.1)
To use an infrared connection with a computer, you
must:
• configure and activate an IrDA-compliant infrared
port on your PC.
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
• align the IrDA port on the phone with the IrDA
port on your computer or another phone.
IrDA port
IrDA port
The connection is ready for data transmission.
164
Phone settings
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note: For optimal performance, use the PC link cable
supplied with your phone.
With other phone (Menu 9.1.2)
Using the infrared connection, you can send or
receive Phone book entries and calendar memos
from another compliant phone.
Note: If you receive a call while sending or receiving
data, you can either answer or reject the call
without interrupting the IrDA connection. But,
picking up your phone may break the
connection between the phones, so use the
supplied headset to answer the call.
Receiving data from another phone
1. Align the IrDA ports on both phones with each
other.
2. Activate the infrared feature on the phones. For
this phone, access the Activate infrared menu
and select With other phone
.
The connection between the phones is
established and your phone receives data from
the other phone. You can receive up to 20 items
in succession.
165
Phone settings
3. When the list of the received data displays, you
have two options:
To save an individual item:
➀
Select one item on the list. The display shows
the Phone book entry or calendar memo.
➀
➀
Press the
Select Options
The following options are available:
key.
.
•
Save: allows you to save the selected data
in your phone’s memory.
•
Discard: deletes the data.
➀
Select Save.
To save all of the data:
➀ Select Options
The following options are available:
.
•
Save all: allows you to save all data.
•
Save all vCard: saves all the Phone book
entries from the received data.
•
Save all vCalendar: saves all the calendar
memos from the received data.
•
•
Discard all: deletes all of the data.
Discard all vCard: deletes all the Phone
book entries from the received data.
•
•
Discard all vCalendar: deletes all the
calendar memos from the received data.
Exit: exits the IrDA function. When the
phone asks if you want to delete the
remaining data, select Yes or No
.
➀
Select a save option.
166
Phone settings
4. When FDN (Fixed Dial Number) mode is enabled
on your phone, enter the PIN2 and select OK
.
For further details about the FDN mode, see
page 174.
5. Select Save
.
The entries are saved.
Sending your Phone book
1. Align the IrDA ports on both phones with each
other to establish the IrDA connection.
The IrDA port of the other phone must be
activated.
2. Access a Phone book entry and select Options
.
See page 39.
3. Select Send via IrDA
.
4. Select Selected data or All data
.
Your phone begins sending the data.
Sending a calendar memo
1. Align the IrDA ports on both phones with each
other to establish the IrDA connection.
The IrDA port of the other phone must be
activated.
2. Access the Calendar menu and select the
memo you want to send. See page 146.
3. Select Options and select Send via IrDA
.
Your phone begins sending the memo.
167
Phone settings
Display settings (Menu 9.2)
In this menu, you can change various settings for
the display and the lights.
Wallpaper (Menu 9.2.1)
This menu allows you to change the background
image or change the settings for the display in Idle
mode.
The following options are available:
Wallpaper list: you can select a background image
to be displayed on the idle screen. You have various
preset images available. You can also select a blank
background or any images downloaded from the
Internet and the optional EasyGPRS programme, or
received in messages.
To change the background image:
1. Select an image from the list.
2. When the image displays, you can scroll to other
images by pressing the Up or Down key.
3. When the image you want displays, choose
Select to display it on the idle screen.
You can also scroll through the list using the Up
or Down key.
Text display: you can specify whether or not the
phone displays the current time and date.
Text color: you can select the colour of the text to
be displayed on the idle screen. This option is
available only when the Text display option is
enabled.
168
Phone settings
Brightness (Menu 9.2.2)
You can adjust the display brightness to see it
better in different lighting conditions.
Press the Up or Down key or press the Volume keys
to adjust the brightness.
Back light (Menu 9.2.3)
You can select the length of time the backlight is on.
The backlight turns on when you press a key, open
the phone, or receive a call or message, and
remains on for the specified length of time.
Service light (Menu 9.2.4)
The keys on the top of the phone light to act as a
service light flashing at regular intervals to indicate
when service is available on the phone.
In this menu, you can select whether or not the
service light is used. It also allows you to select a
color in which the service light flashes.
Select one of the 7 color settings. When the phone
is ready for use, the service light flashes in the
appropriate color.
If you don’t want to use the service light, select Off
.
169
Phone settings
Graphic logo (Menu 9.2.5)
This menu allows you to display your service
provider’s logo instead of its name.
Off: the service provider’s name displays in Idle
mode.
On: the service provider’s logo stored in your phone
displays in Idle mode; if no logo has been stored,
the service provider’s name displays.
Greeting message (Menu 9.3)
You can set a greeting to be displayed briefly when
the phone is switched on.
For further details about how to enter characters,
see page 48.
Own number (Menu 9.4)
This function is a memory aid, which you can use to
check your own phone numbers if you need to do so.
You can:
• assign a name to each of the own phone numbers
registered on your SIM card.
• edit the names and numbers.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
170
Phone settings
Language (Menu 9.5)
You can select a display language. Select either
English Chinese S (Simplified Chinese), or
,
Chinese T (Traditional Chinese).
Note: Depending on your language selection,
available input modes may change. For details,
see page 49.
Security (Menu 9.6)
The Security feature enables you to restrict the use
of your phone by others and to restrict the types of
calls.
Various codes and passwords are used to protect
features of your phone. They are described in the
following sections. Also see pages 180 through 183.
PIN check (Menu 9.6.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch on the phone.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
171
Phone settings
Change PIN (Menu 9.6.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock (Menu 9.6.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter a 4- to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu (Menu 9.6.4).
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch on the phone.
Enable: you are required to enter the phone
password when you switch on the phone.
172
Phone settings
Change password (Menu 9.6.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Privacy (Menu 9.6.5)
Using this menu, you can lock your media contents,
such as multimedia messages, photos, videos,
voice memos, images, sounds, and memos in
Paintbrush. Once you have locked the contents, you
must enter the phone password to access the
associated menus.
1. Select the item you want to lock in order to
place a check mark. Repeat this step to select
more items.
You can remove the check mark by selecting it
again.
2. Select OK
.
3. When the phone asks for the phone password,
enter the password and select OK
.
Note: The password is preset to “00000000” at the
factory. To change this password, see
page 173.
173
Phone settings
SIM lock (Menu 9.6.6)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code to use a different SIM card.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN mode (Menu 9.6.7)
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Phone book. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
Change PIN2 (Menu 9.6.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
174
Phone settings
Extra settings (Menu 9.7)
You can turn on or off the automatic redialling or
answering features.
Select the option you want to activate. A check
mark displays in front of the option. To deactivate
the option, just select it again.
The following options are available:
Auto redial: when this option is checked, the
phone makes up to 10 attempts to redial a phone
number after an unsuccessful call.
Note: The interval between attempts varies.
Active slide: when this option is checked, you can
simply open the phone to answer a call.
When it is unchecked, you must open the phone
and press a key to answer a call, depending on the
setting of the Anykey answer option.
Anykey answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the
the call, press the
key or the Reject soft key. To reject
key or the Reject soft key.
When this option is unchecked, you must press the
key or the Accept soft key to answer a call.
175
Phone settings
Touch calibration (Menu 9.8)
Sometimes your phone may not respond accurately
to your screen taps. In this case, the calibration for
the touch screen needs to be realigned.
When you access this menu, the calibrating process
begins. Tap the cross-hair object as it appears at
each location, until the calibration is complete.
Note: Be precise when you tap the cross- hair object.
To reset the calibration to its default, select Reset
.
Reset settings (Menu 9.9)
You can easily reset your phone to its default
settings.
To reset your phone, enter the 4- to 8-digit phone
password and select OK
.
Note: The password is preset to “00000000.” To
change this password, see page 173
.
176
Solving problems
If you are experiencing problems with your phone,
perform the following simple checks before
contacting a service professional. This may save
you the time and expense of an unnecessary
service call.
When you switch your phone on, the
following messages may appear:
Insert SIM card
• Check that the SIM card is correctly installed.
Enter password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
(PIN) supplied with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu
(Menu 9.6.1). See page 171.
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your service provider.
177
Solving problems
“No service,” “Network failure” or “Not
done” displays
• The network connection has been lost. You may
be in a weak signal area (in a tunnel or
surrounded by buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
178
Solving problems
The phone starts beeping and
“**Warning** Low battery” flashes on
the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Phone book entry
• Check that the number has been stored correctly,
by using the Search feature in Phone book.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
179
Access codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
When requested for any of the codes explained
below, enter the appropriate code, displayed as
asterisks, and select OK. If you make a mistake,
press the
C
key one or more times until the
incorrect digit is cleared and then continue entering
the correct code.
The access codes, except for the PUK and PUK2
codes, can be changed using the Security menu
(Menu 9.6). See page 171 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not accidentally dial an
emergency number.
Phone password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To
See
activate/deactivate the page 172 (Menu 9.6.3).
Phone Lock feature
change the phone
password
page 173 (Menu 9.6.4).
180
Access codes
PIN
The
Personal
I
dentification
N
umber or PIN (4- to 8-
digits) protects your SIM card against unauthorised
use. It is usually supplied with the SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
To
See
activate/deactivate the page 171 (Menu 9.6.1).
PIN Check feature
change the PIN
page 172 (Menu 9.6.2).
PUK
The 8-digit PUK (
PIN
Unblocking
Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
To re-enable your PIN:
1. Enter the PUK and select OK
2. Enter a new PIN of your choice and select OK
3. When the Confirm new PIN message displays,
.
.
enter the same code again and select OK
.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
181
Access codes
PIN2
The PIN2 (4- to 8-digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 174.
PUK2
The 8-digit PUK2 (
PIN
Unblocking
Key
2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and select OK
.
2. Enter a new PIN2 of your choice and select OK
.
3. When the Confirm PIN2 message displays,
enter the same code again and select OK
.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
182
Access codes
Barring password
A 4-digit barring password is required when you use
the Call Barring function. You can obtain the
password from your service provider when you
subscribe to this function.
You can change this password in the Call barring
menu (Menu 3.2). See page 90 for further details.
183
Health and safety
information
Exposure to radio-frequency energy
(SAR information)
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.*
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any
variations in measurements. The SAR values may vary
depending on national reporting requirements and the
network band.
184
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Precautions when using batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge, the type of battery and the
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal,
it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
185
Health and safety information
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
186
Health and safety information
Road safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
Operating environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
187
Health and safety information
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
188
Health and safety information
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
189
Health and safety information
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer
or storage facilities, vehicles using liquefied
petroleum gas, such as propane or butane, areas
where the air contains chemicals or particles, such
as grain, dust or metal powders, and any other area
where you would normally be advised to turn off
your vehicle engine.
190
Health and safety information
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not end the call until given permission
to do so.
191
Health and safety information
Other important safety information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating
properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in an aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
192
Health and safety information
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
193
Health and safety information
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove, or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
194
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet, and to take
full advantage of the features of your mobile phone,
here are a few definitions:
Active slider
Ability to answer a call simply by opening the
phone.
Call barring
Ability to restrict outgoing and incoming calls.
Call diverting
Ability to reroute calls to another number.
Call holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call waiting
Informs you that you have an incoming call when
you are engaged on another call.
Caller line identification services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
195
Glossary
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS)
that allows you to send and receive ring tones and
the service provider’s logo, as well as combinations
of simple media to and from EMS-compliant
handsets. Because EMS is based on SMS, it can use
SMS centres the same way that SMS does. EMS
works on all Global System for Mobile
communications (GSM) networks. EMS senders can
use text, melodies, pictures, sounds, and
animations to enhance the expressive power of
messages that are limited by the display constraints
of mobile devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS provides continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
196
Glossary
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice, or audio
clips, and also video clips and presentation
information.
Multi-party calling
Ability to establish a conference call involving up to
five additional parties.
Phone password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
197
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
Proxy server
A proxy server resides between a Web client, such
as a web browser, and a real Web server and acts
as an intermediary between them. When some
people browse a web site, their browser is not
actually connecting to the web server. The request
from their browser goes to a proxy server, and the
proxy server makes the request to the web server.
A proxy server can improve performance for groups
of users because it caches the results of all requests
for a certain amount of time. If a user requests a
web page that it already loaded for another user, it
reloads the page instead of forwarding the request
to the Web server, which can be a time-consuming
operation.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
198
Glossary
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft keys
Two keys
of which:
and
on the phone, the purpose
• varies according to the function that you are
currently using.
• is indicated on the bottom line of the display just
above the corresponding key.
Voice mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
199
200
202
|
