Syba Tech Computer Accessories SY KVM20050 User Manual

Package Contents  
Hardware Installation  
Operation  
TM  
· Before beginning the installation procedure, ensure that all equipment to  
be connected is powered oꢀ.  
1 SY-KVM20050 USB KVM Switch with Attached Cables  
1 User Guide  
Hotkey Port Selection  
All hotkey port switches begin with tapping the Crtl key twice.  
[Crtl] [Crtl]  
· Unplug power cords of any computers that have the ‘Keyboard Power On’  
function. Otherwise, the switch will receive power from the computer  
Hardware Requirements  
Invokes Auto Scan Mode  
· To prevent damage to your equipment, make sure that all the devices are  
properly grounded  
Console · A VGA, SVGA, or Multisync monitor  
· A USB Keyboard  
Starts Auto Scan. Press and release the [Left shift] key, and then press the  
[Right shift] key.  
[Left shift] [Right shift]  
Installing your new SY-KVM20050 involves the following steps:  
· A USB Mouse  
Cancel Auto Scan Mode  
Press and release the [ESC] or [Space] key  
Scan Interval  
Computers  
The following equipment must be installed on each computer that is to be connected  
to the system:  
Sets the Auto Scan interval to n second intervals - where n is a number from  
1 – 4.  
[Left shift] [Right shift] [n]  
· A VGA, SVGA or Multisync video port  
· A USB Type A port  
Hardware Review  
Note: The n stands for the number of seconds that the focus dwells  
on a port before switching to the other one. Replace the n with a  
number between 1 and 4 when entering this hotkey combination.  
(See the table, below.)  
1. Plug your keyboard, monitor, and mouse into their ports on the SY-KVM20050. The  
keyboard and mouse ports are labeled with an icon to distinguish them.  
Scan Interval Table  
Note: When using a wireless composite keyboard and mouse, its  
USB cable must plug into the SY-KVM20050 keyboard port for the  
Hotkeys to function.  
n
1
2
3
4
Secs.  
3 secs.  
5 secs.(Default)  
10 secs.  
2 Port USB Cable KVM Switch  
SY-KVM20050  
20 secs.  
2. Plug your speakers into the SY-KVM20050’s speaker jack.  
Note: This step is optional  
User Guide  
3. Plug the USB, video, and speaker connectors of the attached KVM cables into their  
respective ports on the computers you are installing.  
1. Port LEDs  
2. KVM Cables  
3. Console Ports  
4. Turn on the power to the computers.  
Specifications and products are subject to  
change without prior notice  
4. Speaker Jack  
5. USB keyboard/Mouse connector  
6. Video Connector  
7. Speaker Plug  
Note: The SY-KVM20050’s Power On default is to link to the ꢁrst  
computer you turn on.  
All trade name referenced are the registered  
trademark of their respective owners  
Made in China  
Hotkey Conꢀguration  
Invoking Hotkey Mode [Ctrl] + [F12] . There are 3 Steps:  
1. Press and hold down the [Ctrl]  
Keyboard Emulation Mapping  
Specifications  
The USB 101/104 key keyboard can emulate the functions of the Sun or Mac  
keyboard. The corresponding functions are shown in the table below.  
Mac Keyboard  
Function  
SY-KVM20050  
Note: When using key combinations, press and release the ꢁrst key, then press  
and release the second key.  
Computer Connections  
Port Selection  
2
Sun Keyboard  
2. Press and release [12]  
3. Release the [Ctrl]  
Hotkey  
Keyboard  
Video  
1 x USB Type A Female (Black)  
1 x HDB-15 Female (Blue)  
1 x USB Type A Female (Black)  
1 x Mini Stereo Jack Female (Green)  
Note: When using [Ctrl] combinations, press and release the Ctrl key, then  
press and release the activation key.  
Console  
Ports  
After invoking Hotkey Mode, key in one of the following keys to perform the  
corresponding function:  
Mouse  
PC Keyboard  
[Shift]  
Mac Keyboard  
Speaker  
Sun Keyboard  
Stop  
PC Keyboard  
[Ctrl] [T]  
Key  
F1  
Function  
Connectors  
Shift  
Ctrl  
Keyboard/ Mouse  
2 x USB Type A Male (Black)  
2 x HDB-15 Male (Blue)  
Sets the PC Compatible keyboard operating platform.  
Sets the Mac keyboard operating platform.  
Sets the Sun keyboard operating platform.  
[Ctrl]  
KVM  
Ports  
Video  
[Ctrl] [F2]  
[Ctrl] [F3]  
[Ctrl] [F4]  
[Ctrl] [F5]  
[Ctrl] [F6]  
[Ctrl] [F7]  
[Ctrl] [F8]  
[Ctrl] [F9]  
[Ctrl] [F10]  
Again  
Props  
Undo  
F2  
[Win]  
Speaker  
2 x Mini Stereo Plug Male (Green)  
2 (Green)  
F3  
[ESC] or  
[Space]  
[Ctrl] [1]  
[Ctrl] [2]  
[Ctrl] [3]  
LEDs  
Selected  
Cancel operation platform setting  
Cable  
Length  
Computers  
4 ft (1.2 m)  
Front  
R [Enter] Resets the Hotkey settings to their default status.  
Emulation  
Video  
Keyboard/ Mouse  
USB  
Copy  
2048 x 1536; DDC2B  
5 Seconds  
[Ctrl] [4]  
[Alt]  
Open  
Paste  
Find  
Scan Interval  
L Alt/Option  
F13  
Operating Temp.  
Storage Temp.  
Humidity  
32 ~ 122°F (0 ~ 50°C)  
-4 ~ 140°F (-20 ~ 60°C)  
0-80% RH, Non-condensing  
Plastic  
Environment  
[Prt_Sc]  
[Scroll Lock]  
[Desktop Menu]  
[Enter]  
Troubleshooting  
F14  
Housing  
Cut  
Symptom  
Possible Cause  
Action  
=
Physical  
Weight  
0.86 lb (0.39 kg)  
Keyboard  
and/or  
Mouse Not  
Responding  
Keyboard / Mouse  
needs to be reset.  
Hotkey sequence  
input incorrectly.  
Unplug the keyboard / mouse from the Console  
Keyboard Port, then plug it back in.  
[Ctrl] [1]  
[Ctrl] [2]  
[Ctrl] [3]  
Properties  
Dimensions  
(L x W x H)  
3.11 x 2.60 x 1.02 in  
(7.90 x 6.60 x 2.60 cm)  
Return  
Delete  
Help  
[Back Space]  
[Ins]  
Resend the Hotkey command - press and  
release each key in the sequence individually.  
Switch needs to be  
reset.  
Turn off the computers; wait 5 seconds; turn the  
computers back on.  
[Ctrl] [Win]  
F15  
[Ctrl] [4]  
[Ctrl] [H]  
Video  
Resolution and/or  
Problems  
Refresh rate set too Select a lower resolution and/or bandwidth.  
high.  
Help  

Zanussi Built In Coffee Machine User Manual
Toastmaster A710P User Manual
Teac CD Player CD H750 User Manual
Sony T310 User Manual
Sony T68i User Manual
Seagate ST9120824A User Manual
Scotts CD Player SMV300 User Manual
Samsung S500e User Manual
Philips X400 User Manual
Optimus 12 1626 User Manual