Welcome
Earpiece
Internal Antenna
Right Soft Key
Perform functions identified
by right display prompt.
Left Soft Key
Perform functions
identified by left
display prompt.
Send/Answer Key
Make and answer calls;
press in idle to see recent
dialled calls.
Menu Key
Open a menu when you
see
M
in the display.
Navigation Key
Power/End Key
Scroll through lists,
set volume.
Press & hold to power
phone on & off. Press &
release to end phone calls,
exit menu system.
USB Connector Port
Insert data cable.
Power Connector Port
Microphone
Headset Connector Port
Insert charger.
Your C330 series phone lets you change convertible covers and keypads (see “Changing Your Phone’s
Cover” on page 24). Your phone may not appear exactly as the phone image above.
Note that all key locations, sequences and functions remain the same with any of the various convertible
covers.
Welcome - 1
Menu Map
Note: This is the standard phone menu
Main Menu
layout. You or your service provider may
have changed the menu layout or changed
some feature names.
•
•
•
Recent Calls
Ring Styles
Media Centre
• My Tones
• MotoMixer
• Picture Viewer
Chat
Games
Browser *
Web Sessions *
Datebook
Voice Dial
Not all features may be available for
all users.
* optional network, SIM card, or
subscription-dependent features
•
•
•
•
•
•
•
•
•
Shortcuts
In idle, press
S
up or down to open
Phonebook, right or left to adjust
volume
Quick Dial
Calculator
Settings
Display my phone number:
Press M #
• (see next page)
SIM Applications *
MyMenu
Service Dial
Fixed Dial
Phonebook
Messages
•
•
•
•
•
•
Go to dialled calls list:
Press
Exit menu system:
Press
See page 78 for MyMenu Shortcuts
N
O
Menu Map - 3
Settings Menu
•
•
•
Call Divert *
• Voice Calls
• Fax Calls
• Data Calls
• Cancel All
• Divert Status
Phone Status
• My Tel. Numbers
• Credit Info/Available
• Active Line
• Battery Meter
• Other Information
In-Call Setup
• In-Call Timer
• Call Cost Setup
• My Caller ID
•
Other Settings
• Personalize
• Main Menu
• Keys
• Greeting
• Wallpaper
• Screensaver
• Quick Dial
*
*
• Initial Setup
• Time and Date
• 1-Touch Dial
• Backlight
• Scroll
• Animation
• Language
• Battery Save
• Contrast
*
• Talk and Fax
• Answer Options
• DTMF
• Call Waiting
Security
• Phone Lock
*
• Master Reset
• Master Clear
• Network
•
• Lock Keypad
• Lock Application
• Fixed Dial
• Car Settings
• Headset
• Call Barring
• SIM PIN
• New Passwords
*
Note: This is the standard phone menu
layout. You or your service provider may
have changed the menu layout or changed
some feature names.
Not all features may be available for all
users.
* optional network, SIM card, or
subscription-dependent features
4 - Menu Map
Table of Contents
Safety and General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
How to get Warranty Service? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
What is not covered by the Warranty. . . . . . . . . . . . . . . . . . . . . . . 19
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing Your SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Changing Your Phone’s Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Charging the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Battery Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Turning Your Phone On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Display Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Calling Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Dialing an Emergency Number . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Inserting Special Characters into Dialing Sequences . . . . . . . . . . 51
Viewing the Received Calls or Dialed Calls List . . . . . . . . . . . . . . 51
Table of Contents - 5
Returning an Unanswered Call . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
One-Touch Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Diverting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Linking Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Transferring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Barring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Sending Messages, Pictures and Sounds . . . . . . . . . . . . . . . . . . . 61
Setting Up the Text Message Inbox . . . . . . . . . . . . . . . . . . . . . . . . 62
Sending Messages and Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Viewing Message Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Receiving and Reading Messages . . . . . . . . . . . . . . . . . . . . . . . . 65
Replying to Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Locking or Deleting a Text Message . . . . . . . . . . . . . . . . . . . . . . . 67
Phonebook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Items in a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Storing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Recording a Voice Name For a Phonebook Entry . . . . . . . . . . . . . 75
Dialing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Editing a Phonebook Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Customizing Your Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . 77
Customizing Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Selecting a Different Language . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Using MyMenu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
6 - Table of Contents
Getting More Out of Your Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Managing Your Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Monitoring Phone Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Network Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Line Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Locking and Unlocking Your Phone . . . . . . . . . . . . . . . . . . . . . . . 85
Changing Your Unlock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Protecting the SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Protecting Web Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Personal Organizer Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Datebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Alarm Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
News and Entertainment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Mobile Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Assigning Phone Themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
MotoMixer Sound Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Creating Alert Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
SIM Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Specific Absorption Rate Data . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Table of Contents - 7
8 - Table of Contents
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR PERSONAL
COMMUNICATOR.
The information provided in this document supersedes the general safety
information contained in user guides published prior to this date. For
information regarding radio use in a hazardous atmosphere please refer to
the Factory Mutual (FM) Approval Manual Supplement or Instruction Card,
which is included with radio models that offer this capability.
RF Operational Characteristics
Your Personal Communicator contains a transmitter and a receiver.
When it is ON, it receives and transmits radio frequency (RF) energy.
The Personal Communicator operates in the frequency range of 900 MHz
to 1990 MHz and employs digital modulation techniques.
When you communicate with your Personal Communicator, the system
handling your call controls the power level at which your personal
communicator transmits. The output power level typically may vary over
a range from 0.063 watts to 1.58 watts.
Exposure To Radio Frequency Energy
Your Motorola Personal Communicator is designed to comply with the
following national and international standards and guidelines regarding
exposure of human beings to radio frequency electromagnetic energy:
•
United States Federal Communications Commission, Code of
Federal Regulations; 47 CFR part 2 sub-part J
Safety and General Information - 9
•
•
•
•
American National Standards Institute (ANSI) / Institute of Electrical
and Electronic Engineers (IEEE) C95. 1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999
Edition
National Council on Radiation Protection and Measurements
(NCRP) of the United States, Report 86, 1986
International Commission on Non-Ionizing Radiation Protection
(ICNIRP) 1998
•
•
National Radiological Protection Board of the United Kingdom 1995
Ministry of Health (Canada) Safety Code 6. Limits of Human
Exposure to Radiofrequency Electromagnetic Fields in the
Frequency Range from 3 kHz to 300 GHz, 1999
•
Australian Communications Authority Radiocommunications
(Electromagnetic Radiation - Human Exposure) Standard 1999
(applicable to wireless phones only)
To assure optimal performance and make sure human exposure to radio
frequency electromagnetic energy is within the guidelines set forth in the
above standards, always adhere to the following procedures:
Portable Personal Communicator Operation
and EME Exposure
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage the
Personal Communicator and may violate FCC and/or other applicable
regulations.
10 - Safety and General Information
DO NOT hold the antenna when the Personal Communicator is "IN USE".
Holding the antenna affects call quality and may cause the Personal
Communicator to operate at a higher power level than needed.
Phone Operation
The Personal Communicator is designed to be used with a headset for
talking and listening. The Personal Communicator can also be placed
inside the holster, then the holster can be clipped onto your belt, pocket,
handbag, or other apparel and used with the headset.
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear the
Personal Communicator on your body when transmitting, always place the
Personal Communicator in a Motorola supplied or approved clip, holder,
holster, case, or body harness. Use of non-Motorola-approved
accessories may exceed FCC RF exposure guidelines. If you do not use
a body-worn accessory, ensure the antenna is at least one inch (2.5 cm)
from your body when transmitting.
Approved Accessories
For a list of approved Motorola accessories, look in the accessory section
of this manual.
Electromagnetic Interference/Compatibility
Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed or otherwise
configured for electromagnetic compatibility.
Safety and General Information - 11
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn
off your Personal Communicator in any facility where posted notices
instruct you to do so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your Personal Communicator when
on board an aircraft. Any use of a Personal Communicator must be in
accordance with applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
The Health Industry Manufacturers Association recommends that a
minimum separation of 6 inches (15 centimeters) be maintained between
a handheld wireless phone and a pacemaker.These recommendations are
consistent with the independent research by, and recommendations of,
Wireless Technology Research.
Persons with pacemakers should:
•
ALWAYS keep the Personal Communicator more than six inches
(15 centimeters) from their pacemaker when the Personal
Communicator is turned ON.
•
•
not carry the Personal Communicator in the breast pocket.
use the ear opposite the pacemaker to minimize the potential for
interference.
•
turn the Personal Communicator OFF immediately if you have any
reason to suspect that interference is taking place.
12 - Safety and General Information
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In
the event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of
your device to determine if it is adequately shielded from RF energy. Your
physician may be able to assist you in obtaining this information.
Safety and General Use in Vehicles
Check the laws and regulations on the use of phones in your vehicle. You
are advised to always obey them.
When using your Personal Communicator in a vehicle, please:
•
•
Use hands-free operation, if available.
Pull off the road and park before making or answering a call.
Operational Warnings
For Vehicles With an Air Bag
Do not place the Personal Communicator in the area over an air bag
or in the air bag deployment area. Air bags inflate with great force. If the
Personal Communicator is placed in the air bag deployment area and the
air bag inflates, the Personal Communicator may be propelled with great
force and cause serious injury to occupants of the vehicle.
Safety and General Information - 13
Potentially Explosive Atmospheres
Turn off your Personal Communicator prior to entering any area with a
potentially explosive atmosphere, unless it is especially qualified for use in
such areas as "Intrinsically Safe" (for example, Factory Mutual, CSA, or
UL Approved). Do not remove, install, or charge batteries in such areas.
Sparks in a potentially explosive atmosphere can cause an explosion or
fire resulting in bodily injury or even death.
The areas with potentially explosive atmospheres referred to above
include fueling areas such as below decks on boats, fuel or chemical
transfer or storage facilities, areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any other area where
you would normally be advised to turn off your vehicle engine. Areas with
potentially explosive atmospheres are often but not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off your
Personal Communicator when you are near electrical blasting caps, in a
blasting area, or in areas posted: "Turn off two-way radio". Obey all signs
and instructions.
Operational Cautions
Antennas
Do not use the Personal Communicator if it has a damaged antenna.
If a damaged antenna comes into contact with your skin, a minor burn
can result.
14 - Safety and General Information
Batteries
All batteries can cause property damage and/or bodily injury such as
burns if a conductive material such as jewelry, keys, or beaded chains
touch exposed terminals. The conductive material may complete an
electrical circuit (short circuit) and become quite hot. Exercise care in
handling any charged battery, particularly when placing it inside a pocket,
purse, or other container with metal objects.
European Union Directives Conformance
Statement
Hereby, Motorola declares that this product is in compliance with
•
•
The essential requirements and other relevant
provisions of Directive 1999/5/EC
All other relevant EU Directives
IMEI: 350034/40/394721/9
0168
Product
Approval
Number
Type: MC2-41H14
The above gives an example of a typical Product Approval Number.
You can view your product's Declaration of Conformity (DoC) to Directive
1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte - to find your
DoC, enter the Product Approval Number from your product's label in the
"Search" bar on the Web site.
Safety and General Information - 15
Warranty Information
Motorola guarantees you, the original purchaser, the Personal
Communicator and accessories which you have purchased from an
authorised Motorola dealer (the "Products"), to be in conformance with the
applicable Motorola specifications current at the time of manufacture for a
term of [1] year from date of purchase of the Product(s) (Warranty Term).
You must inform Motorola of the lack of conformity to the applicable
specifications of any of the Products within a period of two (2) months from
the date on which you detect a defect in material, workmanship or lack of
conformity and in any event within a term not to exceed the Warranty
Term, by submitting the Product for service to Motorola. Motorola shall not
be bound by Product related statements not directly made by Motorola nor
any warranty obligations applicable to the seller.
A list of the Motorola Call Centre numbers is enclosed with this Product.
During the Warranty term, Motorola will, at its discretion and without extra
charge, as your exclusive remedy, repair or replace your Product which
does not comply with this warranty; or failing this, to reimburse the price of
the Product but reduced to take into account the use you have had of the
Product since it was delivered. This warranty will expire at the end of the
Warranty Term.
This is the complete and exclusive warranty for a Motorola Personal
Communicator and accessories and in lieu of all other warranties, terms
and conditions, whether express or implied.
Where you purchase the product other than as a consumer, Motorola
disclaims all other warranties, terms and conditions express or implied,
such as fitness for purpose and satisfactory quality.
16 - Warranty Information
In no event shall Motorola be liable for damages nor loss of data in excess
of the purchase price nor for any incidental special or consequential
damages* arising out of the use or inability to use the Product, to the full
extent such may be disclaimed by law.
This Warranty does not affect any statutory rights that you may have if you
are a consumer, such as a warranty of satisfactory quality and fit for the
purpose for which products of the same type are normally used under
normal use and service, nor any rights against the seller of the Products
arising from your purchase and sales contract.
How to get Warranty Service?
In most cases the authorised Motorola dealer which sold and/or installed
your Motorola Personal Communicator and original accessories will
honour a warranty claim and/or provide warranty service. Alternatively, for
further information on how to get warranty service please contact either
the customer service department of your service provider or Motorola's
call centre at the telephone numbers below for your country.
In order to claim the warranty service you must return the Personal
Communicator and/or accessories in question to Motorola please avoid
leaving any supplementary items like SIM cards. The Product should
also be accompanied by a label with your name, address, and telephone
number; name of operator and a description of the problem. In the case
of vehicular installation, the vehicle in which the Personal Communicator
is installed should be driven to the Authorised Repair Centre, as analysis
of any problem may require inspection of the entire vehicular installation.
*) including without limitation loss of use, loss of time, loss of data, inconvenience,
commercial loss, lost profits or savings.
How to get Warranty Service? - 17
In order to be eligible to receive warranty service, you must present your
receipt of purchase or a comparable substitute proof of purchase bearing
the date of purchase. The phone should also clearly display the original
compatible electronic serial number (IMEI) and mechanic serial number
[MSN]. Such information is contained with the Product.
Conditions
This warranty will not apply if the type or serial numbers on the Product
has been altered, deleted, duplicated, removed, or made illegible.
Motorola reserves the right to refuse free-of-charge warranty service if
the requested documentation can not be presented or if the information
is incomplete, illegible or incompatible with the factory records.
Repair, at Motorola's option, may include reflashing of software, the
replacement of parts or boards with functionally equivalent, reconditioned
or new parts or boards. Replaced parts, accessories, batteries, or boards
are warranted for the balance of the original warranty time period. The
Warranty Term will not be extended. All original accessories, batteries,
parts, and Personal Communicator equipment that have been replaced
shall become the property of Motorola. Motorola does not warrant the
installation, maintenance or service of the products, accessories, batteries
or parts.
Motorola will not be responsible in any way for problems or damage
caused by any ancillary equipment not furnished by Motorola which is
attached to or used in connection with the Products, or for operation of
Motorola equipment with any ancillary equipment and all such equipment
is expressly excluded from this warranty.
18 - Conditions
When the Product is used in conjunction with ancillary or peripheral
equipment not supplied by Motorola, Motorola does not warrant the
operation of the Product/peripheral combination and Motorola will
not honour any warranty claim where the Product is used in such a
combination and it is determined by Motorola that there is no fault with
the Product. Motorola specifically disclaims any responsibility for any
damage, whether or not to Motorola equipment, caused in any way by the
use of the Personal Communicator, accessories, software applications and
peripherals (specific examples include, but are not limited to: batteries,
chargers, adapters, and power supplies) when such accessories, software
applications and peripherals are not manufactured and supplied by
Motorola.
What is not covered by the
Warranty
This warranty is not valid if the defects are due to damage, misuse,
tampering, neglect or lack of care and in case of alterations or repair
carried out by unauthorised persons.
1
2
3
Defects or damage resulting from use of the Product in other than its
normal and customary manner.
Defects or damage from misuse, access to incompatible sources,
accident or neglect.
Defects or damage from improper testing, operation, maintenance,
installation, adjustment, unauthorised software applications or any
alteration or modification of any kind.
4
Breakage or damage to antennas unless caused directly by defects in
material or workmanship.
What is not covered by the Warranty - 19
5
6
Products disassembled or repaired in such a manner as to adversely
affect performance or prevent adequate inspection and testing to
verify any warranty claim.
Defects or damage due to range, coverage, availability, grade of
service, or operation of the cellular system by the cellular operator.
7
8
Defects or damage due to moist, liquid or spills of food.
Control unit coil cords in the Product that are stretched or have the
modular tab broken.
9
All plastic surfaces and all other externally exposed parts that are
scratched or damaged due to customer normal use.
10 Leather cases (which are covered under separate manufacturer's
warranties).
11 Products rented on a temporary basis.
12 Periodic maintenance and repair or replacement of parts due to
normal wear and tear.
Note: The talk-time, stand-by time and total life cycle of a Motorola
rechargeable battery for your Personal Communicator will depend on
usage conditions and network configurations. As a consumable product,
the specifications indicate that you should be able to obtain optimum
performance for your Motorola Personal Communicator within the first six
months from date of purchase and up-to (200) charges.
The warranty for Motorola rechargeable batteries becomes void if
(i) the batteries are charged other than by Motorola approved battery
chargers specified for the charging of the battery,
(ii) any of the seals on the battery are broken or show evidence of
tampering,
(iii) the battery is used in equipment or service other than the cellular
telephone equipment for which it is specified.
20 - What is not covered by the Warranty
Getting Started
What’s in the Box?
Your digital wireless phone has a permanent internal battery, and typically
comes equipped with a charger. Other accessory options can customize
your phone for maximum performance and portability.
About This Guide
Optional Features
Features marked with this label are optional network, SIM
card, and/or subscription-dependent features. These features
may not be offered by all service providers in all geographical
areas. Contact your service provider for information about
availability.
Optional Accessories
Features marked with this label require the use of an optional
Motorola Original™ accessory.
Getting Started - 21
Changing Your SIM Card
Your SIM (Subscriber Identity Module) card contains your phone number,
service details, and phonebook/message memory. It must be installed in
the base of the phone.
Caution: Do not bend or scratch your SIM card. Avoid exposing your SIM
card to static electricity, water, or dirt.
Note: Since your C330 series phone lets you change covers and keypads,
it may not appear exactly as the phone pictured. All key locations,
sequences, and functions remain the same with any of the various
convertible covers.
To Change Your SIM Card
1
Press down on the
cover release button at
the top of your phone
1
2
Release
button
2
Pull the top of the
phone’s back cover
to release it
3
Slide the metal SIM
card holder back to
unlock it, then lift up to
open it slightly.
SIM card
holder
Remove the old SIM
card, if necessary.
3
22 - Getting Started
To Change Your SIM Card
4
Insert the new SIM
card in the holder with
the cut corner on the
upper left and the gold
plate facing down.
SIM card
4
5
Close the SIM card
holder and slide it
forward to lock it.
Getting Started - 23
Changing Your Phone’s Cover
Your phone uses a convertible cover, keypad, and (in some cases) side
band that you may replace to completely change its appearance.
Note: Since your C330 series phone lets you change covers and keypads,
it may not appear exactly as the phone pictured. All key locations,
sequences, and functions remain the same with any of the various
convertible covers.
To Remove a Cover and Keypad
1
Press down on the
cover release button at
the top of your phone.
1
2
Release
button
2
Pull the top of the
phone’s back cover to
release it.
Note: If your cover has
a removable side
band, remove it at this
point.
Side band
3
4
Pull the side tabs away
from the phone, then
Lanyard loop
Lift up on the lanyard
loop to pull the phone
out of the front cover.
4
3
Side tabs
24 - Getting Started
Note: Always use Motorola Original™ covers. The phone warranty does
not cover damage caused from using non-Motorola accessories.
Always use the keypad and side band (if applicable) that matches the new
cover.
To Install a Cover and Keypad
1
Slide the top of the
phone into the top of
the new front cover.
1
2
Press the bottom
of the phone into the
front cover until the
side tabs snap into
place.
2
Note: If your cover
has a removable side
band, attach it at this
point.
Side tabs
3
4
Insert the bottom of
the back cover.
4
Press the top of the
back cover down until
it hooks over the cover
release button.
3
Getting Started - 25
Resetting Your Phone
Under some conditions, your phone can become frozen on a single
display. To correct this, reset your phone as follows:
To Reset Your Phone
1
Remove your phone’s back and front cover as described in
“Changing Your Phone’s Cover” on page 24.
2
Use a small object to
press the Reset button
on the front of your
phone.
Your phone display
should be restored.
Reset button
3
Replace your phone’s cover.
Charging the Phone
Your phone has a built-in battery. Before you can use your phone, you
need to charge the battery, as indicated by the following instructions.
Some batteries perform best after several full charge/discharge cycles.
26 - Getting Started
To Charge the Phone
1
Plug the travel
charger into the
middle jack on the
bottom of your phone.
2
3
Plug the other end of the travel charger into the appropriate
electrical outlet.
When your phone indicates that it is fully charged
(Charge Complete), remove the travel charger.
Note: When you charge the battery, the battery level indicator in the upper
right corner of the display shows how much of the charging process is
complete. See the “Battery Level Indicator” item on page 31.
Battery Use
To maximize your battery’s performance:
•
Always use Motorola Original™ battery chargers. The phone
warranty does not cover damage caused from using non-Motorola
battery chargers.
•
New phones or phones that have been stored for long periods of
time may require a longer initial charge time.
•
•
Maintain the phone at or near room temperature when charging.
Do not expose phones to temperatures below -10°C (14°F) or above
45°C (113°F). Always take your phone with you when you leave your
vehicle.
Getting Started - 27
Turning Your Phone On
To Turn Your Phone On
1
Press and hold
O
(the End/Power key)
End/Power Key
2
If necessary, enter your SIM card PIN code and press
OK ) to unlock your SIM card
(
+
Note: If you enter an incorrect PIN code three times in a
row, your SIM card is disabled and your phone displays the
message SIM Blocked. (For more information, see
“Protecting the SIM Card” on page 88.)
3
If necessary, enter your four-digit unlock code and press
OK
(+) to unlock your phone
Note: The unlock code is originally set to 1234. (For more
information, see “Locking and Unlocking Your Phone” on
page 85.)
Adjusting the Volume
You can adjust your phone’s earpiece and ringer volume by pressing right
and left on the
S:
When
You Can Adjust
you are in a call
earpiece speaker volume
the display is idle
ringer volume
28 - Getting Started
Making and Answering Calls
This section summarizes the most basic calling features. For more
features, see “Calling Features” on page 49.
Built-in antenna
Making a Call
There is a built-in antenna in the top of your phone.
Do not block the antenna while you are on a call.
To call a number, your phone must:
•
•
•
be turned on and unlocked
have a SIM card inserted and unlocked
have a network connection with adequate signal strength
To Make a Call
1
Enter the number with the keypad keys (up to 40 digits)
Note: If you make a mistake, press DELETE ) to delete
) to clear all
(-
the last digit, or press and hold DELETE
(-
digits.
2
3
Press
Press
N
O
(send key) to make the call
(end key) when the call is done.
Note: You can make an emergency call even when the phone is locked, or
when a SIM card is not inserted. See “Dialing an Emergency Number” on
page 50.
Getting Started - 29
Answering a Call
To answer a call, your phone must:
•
•
•
be turned on and unlocked
have a SIM card inserted and unlocked
have a network connection with adequate signal strength
When you receive a call, your phone rings and/or vibrates and displays
an incoming call message.
To Answer a Call
1
Press
N
or ANSWER
(+)
2
Press
O
(end key) when the call is done.
30 - Getting Started
Using Your Phone
See page 1 for a diagram of basic phone components.
Display Symbols
Some of the phone functions described in this guide must be performed
from the idle display. The term idle display refers to the standard display
that you see when your phone is on and ready to use, when you are not on
a call or using the menu system.
—
Service Indicator
˜
In Use Indicator
™
Roam Indicator
š
Text Entry
Indicator
(if applies)
›
Message
Indicator
–
ž
Signal Strength
Indicator
œ
Battery
Level
Indicator
5éO, õ=E
x
12:00
Alert Type
Indicator
M
PH.BOOK
MESSAGE
Clock
Menu Indicator
–
Signal Strength Indicator: Shows the strength of your phone’s
connection with the network.
Strong
5
4
3
2
1
j
No signal
You cannot make or answer calls when the “no signal” indicator is
displayed.
Using Your Phone - 31
—
Service Indicator: Indicates if you have a GPRS
connection ( ). GPRS allows faster data transfer speeds,
é
and your service provider may indicate when a GPRS packet
data connection is active. The indicator does not mean that
you are in a call; only that you are registered on the network via a GPRS
connection.
˜
In Use Indicator: Indicates when a call is in progress, and when you
have a secure (
G) or unsecure (
F) connection.
™
Roam Indicator: Appears when your phone uses another
network system outside your home network. When you leave
your home network area, your phone roams or seeks another
network. Icons here can also indicate your text entry mode
(alpha, numeric, symbol, etc.)
Text Entry Indicator: Indicates your Text Entry Method whenever you
are in a text editor (Tap, iTap, etc.). See “Entering Text” on page 41.
Message Indicator: Indicates when you have an active
š
›
Chat session, or when you have a new voice or text message
waiting.
œ
Battery Level Indicator: Shows the amount of charge left in your
battery. The more bars visible, the greater the charge.
High
E
D
C
B
Low
Recharge your battery as soon as possible when you see the Low Battery
warning message and hear the low battery alert.
32 - Using Your Phone
Note: When you charge the phone, the battery level indicator instead
shows how much of the charging process is complete. See “Charging the
Phone” on page 26.
Menu Indicator: Indicates that you can press
M
to open a menu. See
“Using the Menu” on page 33.
ž
Alert Type Indicator: Shows the current selected alert profile. The
default alert setting is loud ring.
w
y
t
= loud ring
= vibrate
= silent
x
u
= soft ring
= vibrate and ring
Using the Menu
Navigating to a Feature
This guide shows how to navigate to a menu feature as follows:
Find the Feature
M
>
>
Recent Calls
Dialled Calls
The > symbol means that you should scroll to and select the feature. This
example shows that you should press , scroll to and select Recent Calls
then scroll to and select Dialled Calls to see the dialed calls list.
M
,
Using Your Phone - 33
Selecting a Feature
Some features require you to select an item from a list:
Press BACK
go back to the previous
screen.
(-) to
5
E
Dialed Calls
Highlighted item
10) John Smith
9) Mary Smith
M
BACK
VIEW
A sub-menu is available.
Press
M
to open the
sub-menu.
Press VIEW
(+) to view details of the
highlighted item.
Select an item by highlighting it using one of these approaches:
•
•
•
Press
S
to scroll up or down to the item you want.
In a numbered list, press a number key to highlight the item.
In an alphabetized list, press a key multiple times to cycle through
the letters on the key and highlight the closest matching list item.
Setting Up Your Phone
You can adjust a wide variety of phone settings to suit your needs. You
can download pictures and sounds to use as your wallpaper, screen saver,
animation, or alert tones. See “Downloading Pictures, Games, and
Sounds” on page 101.
34 - Using Your Phone
Setting the Time and Date
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Time and Date
>
Changing Personal Greetings
To change the text displayed when you turn on your phone:
Find the Feature
M
>
>
Settings
Personalise
>
Other Settings
Greeting
>
Choosing Alert and Ring Tones
Your phone rings or vibrates to notify you of an incoming call, message, or
other event. This ring or vibration is called an alert. You can select one of
five different alert profiles:
Loud ring
Vibrate
Silent
Soft ring
w
y
t
x
u
Vibrate and ring
The alert setting indicator in your display shows the current alert profile
(see illustration on page 31).
Each alert profile contains settings for ringer and keypad volume. It also
includes alert tone settings for different events: incoming calls, text
messages, voicemail messages, data calls, alarms, and reminders. You
can modify the settings in each profile.
Note: To mix your own alert tones, see “MotoMixer Sound Editor” on
page 107.
Using Your Phone - 35
Select an Alert Profile
Find the Feature
M
>
Ring Styles
>
Alert
> the profile
Customize an Alert Profile
You can customize a profile by changing the alerts used for specific events
(such as incoming calls, text messages, etc.). Your phone includes a
variety of preset alert tones and vibrations. Any changes you make are
saved to the current alert profile.
Note: This feature also lets you set the profile’s ringer volume and keypad
volume.
Find the Feature
M
>
Ring Styles > alert Detail
> an event > the event alert
Find the Feature
M
>
Ring Styles > alert Detail
Press
To
scroll to the event for which you
want to set a new alert
1
S
2
CHANGE
(+
)
select the event
The phone displays the list of
available alerts.
scroll to the alert you want for the
event
3
4
S
SELECT
(
+
)
select the alert
36 - Using Your Phone
Setting Your Display Features
You can change the appearance of your display.
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Choose one of the following dislpay settings:
Setting
Backlight
Description
the amount of time your backlight remains on
Off conserves the battery)
(
Contrast
Scroll
the display contrast
tells the cursor to stop or wrap around when it
reaches the end of a list in the display
Animation
makes your phone’s menus move smoothly as
you scroll up and down (Off conserves the
battery)
Wallpaper
a graphic that appears as the background in
your phone display
Screen Saver
Battery Save
an animation that appears in your display when
your phone is inactive
Adjusts the phone’s power usage to conserve
power
Setting Your Backlight
You can set the amount of time that the display backlight remains on, or
turn off the backlight to conserve battery power:
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Backlight
>
Using Your Phone - 37
Setting Your Contrast
You can set the amount of contrast in your display:
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Contrast
>
Setting Your Display Scrolling
You can force the cursor to stop or wrap around when it reaches the top or
bottom of a list in the display:
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Scroll
>
Setting Display Animation
You can turn animation off (to conserve the battery) or on. Animation
makes your phone’s menus move smoothly as you scroll up and down.
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Animation
>
Setting Battery Save
To adjust the phone’s power usage to conserve power
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Battery Save
>
Resetting All Options
To reset all options back to their factory settings except for the unlock
code, security code, and lifetime timer:
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Master Reset
>
38 - Using Your Phone
Clearing All Information
To reset all options back to their factory settings and clear all user entries
(such as Phonebook entries and downloaded wallpapers, screen savers,
and sounds):
Warning: This option erases all user-entered information stored in your
phone’s memory, including phonebook and datebook entries and
downloaded files. Once you erase the information, it cannot be recovered.
It resets all options back to their factory settings except for the unlock
code, security code, and lifetime timer.
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Master Clear
>
Setting Up Your Phone for Hands-Free Use
A phone headset lets you use your phone without using your hands.
You can also purchase an optional Motorola Original™
Easy-Install Hands-Free Kit for your car. This accessory
provides an alternative way for you to use your phone without
using your handset.
Note: The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws and
regulations on the use of these products.
Using Your Phone - 39
Automatic Answer
When you activate automatic answer and connect your phone to the
Easy-Install Hands-Free Kit or phone headset, your phone automatically
answers calls after two rings.
Find the Feature
M
>
>
Settings
Car Settings or
Headset Auto Answer
>
Other Settings
>
Automatic Hands-Free
You can set up your phone to automatically route calls to the Easy-Install
Hands-Free Kit when it detects a connection.
Find the Feature
M
>
>
>
Settings > Other Settings
Car Settings
Auto Handsfree
Setting Other Preferences
To customize other settings on your phone:
•
•
•
Calls: See “Diverting a Call” on page 57 and “Barring a Call” on
page 58
Menus: See “Customizing Menus” on page 77 and “Using MyMenu”
on page 78
Pictures and Sounds: See “Downloading Pictures, Games, and
Sounds” on page 101, “Creating Alert Tones” on page 111,
“MotoMixer Sound Editor” on page 107, and “Assigning Phone
Themes” on page 102
40 - Using Your Phone
Entering Text
Various text entry methods make it easy for you to enter names, numbers,
and text messages on your phone.
Character Chart
Use this chart as a guide for entering spaces, numbers, letters, symbols,
and other characters with the Tap Method text mode. Press the same key
repeatedly to cycle through available characters.
1
space . 1 ? ! , @ _ & ~ : ; "
- ( ) ' ¿ ¡ % £ $ ¥
2
3
4
5
6
7
8
9
0
a b c 2 ä å á à â ã α β
d e f 3 ë é è ê
g h i 4 ï í î
j k l 5
m n o 6 ñ ö ø ó ò ô õ
p q r s 7 ß σ
t u v 8 ü ú ù û
w x y z 9 ξ ψ
+ - 0 x * / \ [ ] = > < # §
ç
δ
φ
γ
λ
ω
π
θ
Your phone model may not include all of the characters shown in the
above chart.
Using Your Phone - 41
Choosing a Text Mode
To activate a text mode, press
the text mode from the menu:
M
from any text entry screen and select
iTAP
Let the phone predict each word as you enter it,
then choose the word from a list (see
“Predictive Text Entry with iTAP™ Software” on
page 46).
Tap Method
Enter characters one at a time by pressing the
key for the letter, number, or symbol(see “Tap
Method” on page 42). This is the standard
mode for entering text on your phone.
Numeric
Symbol
Enter numbers only.
Enter symbols only (see “Symbol Mode” on
page 45).
Browse
Browse through your phonebook and recent
calls lists to select a name or number to enter.
Note: The text mode you select remains active until you change it by
selecting another mode.
Tap Method
Tap method is the default standard mode for entering text on your phone.
To activate tap method from any text entry screen, press
M
and select
the Tap Method menu option.
42 - Using Your Phone
To enter text using the tap method:
Do This
To
1
Press a number key cycle through the characters
one or more times
associated with the key and select
the character you want (see the
“Character Chart” on page 41).
2
3
Continue to press
number keys
enter the rest of the characters in
the text message
Press OK
(
+
)
accept and store the text when you
are finished
Using Your Phone - 43
General Text Entry Rules
Press a number key
to enter text at
flashing cursor
location.
Press
S
up or
down to change
character in block
cursor to uppercase or
lowercase.
Msg:
Press a number key
as many times as
necessary to enter
the desired
M
character.
Press
S
left or
right to move flashing
cursor to the left or
right in text message.
Press and hold a
number key to cycle
between tap method
and numeric text
entry mode.
•
•
If you do not press a key for two seconds, the character in the block
cursor is accepted, and the cursor moves to the next position.
The first character of each sentence is capitalized unless you
manually change it. (Press
S
up or down to change the character
to upper or lower case while it is highlighted.)
44 - Using Your Phone
Symbol Mode
Your phone provides an alternate way to find and enter symbol characters
in a text message. You can view and select from a variety of available
symbols.
To activate symbol mode from any text entry screen, press
M
and select
the Symbol menu option.
To enter a symbol in symbol mode:
Do This
To
1
Press a number key display its symbol options (see the
one time
“Symbol Chart” on page 46)
The symbols associated with the
key you pressed are shown at the
bottom of the display. If necessary,
press other keypad keys to find the
symbol you want.
2
3
Press the scroll
highlight the symbol you want
left
*
or the
scroll right
#
key
or
Press the number
key multiple times
Press SELECT
(+
)
add the highlighted symbol to the
text area at the top of the display
Using Your Phone - 45
Symbol Chart
Use this chart as a guide for entering symbols in symbol mode.
1
2
3
4
5
6
7
8
9
0
space . ? ! , @ _ & ~ : ; " - ( ) ' ¿ ¡ % £
¥
$
@ _ \
/ : ;
" & '
( ) [ ] { }
¿ ¡ ~
< > =
£ ¥
$
# % *
+ - x * / = > < # §
Predictive Text Entry with iTAP™ Software
iTAP™ software provides a predictive text entry method that lets you enter
the letters of a word using only one keypress per letter.
You must activate iTAP software prior to entering letters. You can do this
from any text entry screen by pressing
M
to open the Entry Method menu
and selecting the iTAP menu option.
46 - Using Your Phone
Enter Words
To enter a word with iTAP software:
Do This
To
1
Press a number key enter the first letter of the word
one time
The letters associated with the key
you pressed are shown at the
bottom of the display.
2
Press number keys enter the rest of the word
(one per letter)
Alternative words and letter
combinations are shown at the
bottom of the display based on the
keys you press. These word choices
are updated with each keypress.
3
4
When you have
entered all the
letters of the word,
locate and highlight the word you
want
press
S
Press SELECT
(+
)
add the highlighted word to the text
area at the top of the display
A space is automatically inserted
after the word.
Using Your Phone - 47
For example, to spell the word “act,” press 2 2 8
:
Flashing cursor
indicates
insertion point.
Press
S
to
5
E
scroll and see
additional word
choices.
Act Cat Bat Abu
DELETE
}
SELECT
M
Press DELETE
(
-
) to
Press SELECT
(+) to insert the
clear the last letter entered.
highlighted word.
48 - Using Your Phone
Calling Features
This chapter describes features related to making and answering calls.
For information about other call-related features, see “Viewing the
Received Calls or Dialed Calls List” on page 51 and “Data Calls” on
page 82. For basic instructions on how to make and answer calls, see
pages 29–30.
Redialing a Number
You can redial a previously dialed phone number, whether the call was
connected or busy. From the idle display, press
N, select the call you
want to redial, and press
N
again.
Using Caller ID
The calling line identification (caller ID) feature lets you see
who is calling before you answer.
•
If the caller’s name is stored in your phonebook, the phone
automatically displays the Name or Icon ID. Otherwise, the phone
displays the caller’s phone number. To create or change a
phonebook entry, see “Storing a Phonebook Entry” on page 70.
•
•
If caller ID information is not available, your phone displays the
message Incoming Call
.
Your phone number will be displayed on the mobile you are calling.
To block it while dialing (with digits visible in the display),
Press
next call. To block it for messages, go to settings
my caller ID Next call only
M
>
Hide ID/Show ID to Hide (or show) your caller ID for the
>
in call set-up
>
>
.
Calling Features - 49
Dialing an Emergency Number
Your service provider programs one or more emergency phone numbers
(such as 999) that you can call under any circumstances. You can dial and
call the emergency number even when your phone is locked, when you
are prompted to enter a code or password, when the SIM card is not
inserted in your phone, or when the SIM card is blocked or disabled.
Note: Emergency numbers vary by country. Your phone’s emergency
number(s) may not work in all locations.
To call the emergency number at any time:
Press
To
1
keypad keys
dial the emergency number (such
as 999)
2
N
call the emergency number
50 - Calling Features
Inserting Special Characters into Dialing
Sequences
While dialing (with digits visible in the display), you can press
insert one of the following:
M
and
Option
Desctiption
Insert Pause
Your phone waits until the call
connects before it dials the next
digit(s) in the series
(inserts a
p)
Insert Wait
(inserts a w)
Your phone waits until the call
connects, then prompts you for
confirmation before it dials the next
digit(s)
Insert 'n'
(inserts an
Your phone prompts you for a
number before dialing the call. The
number you enter is inserted into
the dialing sequence in place of
n)
the
n
Viewing the Received Calls or Dialed
Calls List
Your phone keeps lists of the numbers from calls you recently received
and dialed, even if the calls did not connect. The lists are sorted from
newest to oldest entries. The oldest entries are deleted as new ones are
added. Each entry tells you the person’s number (or name, if available)
and whether the call connected or not. You can call, store, or delete the
numbers on these lists.
Calling Features - 51
Shortcut: Press
N
to go directly to the dialed calls list from the idle
display.
To open the recent calls menu:
Find the Feature
M
>
Recent Calls
Press
To
scroll to Received Calls or Dialled Calls
1
2
3
S
SELECT
(
+
)
select Received Calls or Dialled Calls
scroll to an entry you want to call,
store, or delete
S
Note:
call the entry’s number
Note: Press and hold
<
means the call connected.
4
N
N
for two
seconds to send the entry number
as DTMF tones. To activate DTMF
tones, see “Sending DTMF Tones”
on page 80.
or
+
if View appears above the
+
key—
view the entry’s details
if Store appears above the
+
key—store the entry’s details in the
phonebook
or
M
open the Last Calls Menu to perform
other procedures as described in
the following list
52 - Calling Features
The Last Calls Menu includes the following options:
Option
Store
Description
Create a phonebook entry with the
selected number in the No. field. (This
option does not appear if STORE appears
above the
+
key, or if the number is
already stored as a phonebook entry.)
Delete
Delete the entry. (This option does not
appear if DELETE appears above the
+
key.)
Delete All
Delete all entries in the current list.
Hide ID/Show ID
Hide (or show) your caller ID for the next
call.
Send Message
Create a new text message, with the
selected number in the Tel No. field. See
“Sending Messages and Files” on
page 64.
Add Digits
Add digits to the end of the selected
number.
Attach Number
Attach another number from the
phonebook or recent calls list to the end
of the selected number.
Send Tones
Send the selected number to the network
as DTMF tones, for credit card calling or
password entry. (This option is available
only during an active call.)
To activate DTMF tones, see “Sending
DTMF Tones” on page 80.
Calling Features - 53
Returning an Unanswered Call
Your phone keeps a record of your unanswered calls. When you cannot
answer a call, your phone displays:
•
•
the
T
(missed call) indicator
the message
calls
X
Missed Calls, where
X
is the total number of missed
Press
To
1
VIEW
(
+
)
see the received calls list, beginning
with the most recent call
scroll through the list and select a
call that you want to return
2
3
S
N
make the call
Using Voicemail
You can listen to your voicemail messages by calling your
network voicemail phone number. Voicemail messages are
stored on the network—not on your phone. Contact your
service provider for more details.
54 - Calling Features
Storing Your Voicemail Number
Store your voicemail number in your phone to make it faster and easier to
use voicemail. Your voicemail number is provided by your service
provider.
Find the Feature
M
M
>
>
Messages
VoiceMail Setup
Press
To
1
keypad keys
enter the phone number for your
voicemail
2
OK
(
+
)
store the number
Receiving a New Voicemail Message
When you receive a voicemail message, your phone displays
New VoiceMail &. (Some networks only indicate when you have
messages, whether they are new or not.) If reminders are turned on, your
phone sends a reminder every five minutes until you close the new
message notification, listen to the message, or turn off your phone.
(See “Alarm Reminders” on page 96.)
From the new message notification:
Do This
To
Press CALL
(+
)
call your voicemail phone number
and listen to the message
Calling Features - 55
Listening to a Voicemail Message
To listen to your voicemail messages at any time:.
Find the Feature
M
>
Messages > Voicemail
Speed Dialing
When you store an entry in your phonebook, it is assigned a unique speed
dial number. You can then use the speed dial feature to call the entry. In
the idle display, just enter the speed dial number and press # N
.
To make an entry in the phonebook or view an existing entry’s speed dial
number, see “Storing a Phonebook Entry” on page 70.
One-Touch Dialing
You can call phonebook entries 1 through 9 with the push of a single key.
Press and hold the one-digit speed dial number for one second. To store
entries in locations 1 through 9 in the phonebook, see “Storing a
Phonebook Entry” on page 70.
You must Assign the 1-touch dial feature to numbers 1 through 9 in your
phone memory phonebook or SIM card phonebook:
Find the Feature
M
>
>
>
Settings Other Settings
Initial Setup
1-Touch Dial
>
56 - Calling Features
Using Call Waiting
If you subscribe to call waiting, an alert tone sounds while you
are on a call to indicate that you have received a second call.
To put the first call on hold and answer the second call, press
N
.To activate or deactivate call waiting:
Find the Feature
M
>
>
Settings
Call Waiting
>
In-Call Setup
Diverting a Call
Call diverting sends your phone’s incoming calls directly to
another phone number.
Find the Feature
M
>
Settings Call Divert
>
The call divert options are:
Setting
All Calls
Description
diverts all calls
If Unavailable
Detailed
diverts calls if your phone is
unavailable
uses different divert numbers if you
are out of range, unable to answer,
or busy (voice calls only)
Off
does not divert calls
Calling Features - 57
Linking Calls
To talk to more than one person on a call, you can make a
conference call. Call the first person and press HOLD ),
then call the second person and press LINK ).
(+
(
+
Transferring a Call
You can directly transfer a call without talking to the person who answers.
During a call: Enter the phone number where you are transferring the call
Find the Feature
M
>
Transfer
and press
N.
Barring a Call
Call barring lets you restrict outgoing or incoming calls. You
can restrict all calls, calls to international numbers, or calls
while roaming.
Find the Feature
M
>
>
Settings
Call Barring
>
Security
58 - Calling Features
Putting a Call on Hold
While you are on a call:
Do This
To
Press HOLD
(
+
)
put a call on hold
(if available)
Your phone displays a
l
(flashing
or
phone) indicator to indicate that the
call is on hold.
Press
M
>
Hold
Calling Features - 59
60 - Calling Features
Sending Messages, Pictures
and Sounds
Text messages are brief messages that you can send and
receive (such as Where are we meeting?). Received messages
appear on your phone display or in your text message inbox.
You must set up the text message inbox before you can send and receive
these messages. Contact your service provider for details.
Note: Your service provider may have already programmed the text
message inbox settings for you.
Sending Messages, Pictures and Sounds - 61
Setting Up the Text Message Inbox
Find the Feature
M
M
>
>
Messages
Text Msg Setup
Press
To
scroll to Service Center No.
1
2
S
CHANGE
(+
)
change the Service Center No. which
is provided by your service provider
3
keypad keys
enter the phone number for the
service center that handles your
outgoing messages
4
5
6
OK
(
+
)
store your service center number
CHANGE
(
+
)
change the Expire After period
keypad keys
enter the expiration period—the
number of days your network tries to
resend unreceived messages
7
8
OK
(
+
)
store the expiration period
CHANGE
(
+
)
)
change the Reply Type
scroll to the default type of replies
you want to send—text messages,
or other formats
9
S
10 OK
11 CHANGE
12
(
+
)
store the reply type
(
+
change the Cleanup setting
scroll to the period of time that
messages stay in your inbox
S
62 - Sending Messages, Pictures and Sounds
Press
To
13 SELECT
(+
)
select the cleanup period
If you select Custom, continue.
Otherwise, the procedure is
complete.
change the entry for the number or
label
14
15
S
S
switch between the number and the
label
16 DONE
(-
)
store the custom cleanup period
after you finish entering all
information
Sending Messages, Pictures and Sounds - 63
Sending Messages and Files
You can send text messages and pictures or sounds to one or more
recipients. You can manually enter each recipient’s phone number, or
select one or more numbers from the phonebook or recent calls lists.
Shortcut: While dialing (with digits visible in the display), you can Press
M
>
Send Message to create a text message addressed to the number
entered
Note: When you manually enter multiple phone numbers in the To field,
you must insert a space between each number. Press and hold
insert a space as needed.
1
to
Find the Feature
M
M
>
>
Messages
New Message
Complete the message contents:
Item
Description
To
Enter one or more phone numbers
or email addresses where you want
to send the message.
You can press BROWSE
(+) to
select recipients from the
phonebook or recent calls lists
Msg
Enter the text message (see
“Entering Text” on page 41).
To insert a picture, animation, or
sound file in the message, press:
M
>
Insert > object type
> object
64 - Sending Messages, Pictures and Sounds
Viewing Message Status
Text messages that you send are stored in the outbox. To view the
contents of your outbox:
Find the Feature
M
>
Messages > Outbox
Messages are sorted from newest to oldest. The following icons indicate
message status:
á
m
= sending in progress
= sending failed
Y
= delivered
Receiving and Reading Messages
Note: You must set up the text message inbox before you can receive text
messages. See “Setting Up the Text Message Inbox” on page 62.
When you receive a new message, your phone displays New Message X
and gives an alert. Press READ
(+) to open the message (or your text
message inbox if there are multiple messages).
Note: When your inbox is full, a flashing envelope will appear.
Sending Messages, Pictures and Sounds - 65
While reading a message, you can press
that includes the following options:
M
to view the Text Msg Menu
Option
Go To
Description
Go to a Web address (URL) in the
message.
Forward
Store
Open a copy of the text message, with an
empty To field.
Store a message attachment (picture,
animation, or sound file) or a phone
number in the message.
Note: You can also save some
attachments as your Wallpaper
,
Screen Saver, or Ring Tone
.
Replying to Messages
While viewing a text message, you can create a reply:
The Text Msg Menu includes the following:
Option
Reply
Description
Open a new text message, with the
M
>
message’s Reply To number in the To field.
66 - Sending Messages, Pictures and Sounds
Locking or Deleting a Text Message
You can open your text message inbox to read, lock, or delete messages
at any time.
Messages in the text message inbox are sorted from newest to oldest.
When your inbox is full, a flashing envelope will appear. To view new
messages, you must delete some from your text message inbox.
Find the Feature
M
>
Messages > Text Msgs
Press
To
scroll to the message you want
= unread,
= read, = read and locked)
1
S
(
n
Y
f
2
3
READ
SAVE
(
+
)
open the message
(
+
—left)
close the message without changes
or
REPLY
or
(
-—right)
reply to the message
M
open the Text Msg Menu
Sending Messages, Pictures and Sounds - 67
68 - Sending Messages, Pictures and Sounds
Phonebook
You can store a list of names and phone numbers or email addresses in
your phone’s electronic phonebook. You can view these entries and call
them directly from your phone.
For email addresses, you can send a text message directly
from your phone.
To see the list of names stored in your phonebook, press
M
>
Phonebook from the idle display. Scroll to a name and
press VIEW
(+) to view details of the phonebook entry as shown in the
following display.
Items in a Phonebook Entry
Type indicator
identifies
number type:
Voice Name indicator
indicates a recorded
voice name
Entry’s Name
$
U
S
h
Z
p
[
Work
Home
Main
Entry’s phone
5
E
number, email
address, or mailing
list members.
Mobile
Fax
$*Carlo Emrys
5551212
Speed No.15#(P)
Pager
Email
M
BACK
EDIT
Edit entry
to open the
Return to
list
Press
M
Phonebook Menu
Phonebook - 69
Notes:
•
Email Address entries, Mailing List entries, and entries stored on the
SIM card do not have Type Voice Name, Icon ID, or Ringer ID
,
information.
•
If the phonebook entry is a mailing list, list members are listed after
the entry’s name.
Storing a Phonebook Entry
A phone number or email address is required for a phonebook entry. All
other information is optional.
You can store a phonebook entry on your phone or on the SIM card.
Entries with a speed dial number from 1 through 100 are stored on the
phone. 101 and above are stored on the SIM.
Shortcut: Enter a phone number in the idle display, then press STORE
(+)
to create a phonebook entry with the number in the No. field. Go directly to
step 3 in the following procedure to enter additional information and store
the entry.
Note: You can also use the following procedure to store a fixed dial entry
by scrolling to and selecting Fixed Dial
.
70 - Phonebook
Enter Information
Find the Feature
M
M
>
>
Phonebook
New
Press
To
scroll to Phone Number Email Address,
or Mailing List
,
1
S
2
3
4
5
SELECT
(
+
)
select the type of entry
select Name
CHANGE
OK
CHANGE
(
)
(
+)
(
+
store the name
+
)
select No., Email, or Members
Note: If you select Members (for a
Mailing List), a list of phonebook
entries appears.
a
b
c
Press
entry.
S
to scroll to an
Press ADD
REMOVE
Press DONE
(+
) or
(
+
).
(-) when
you are finished. You can
skip to step 9 below.
6
OK
(
+
)
store the phone number or email
address
Phonebook - 71
Press
To
7
CHANGE
(+
)
select Type
Note: Your phone automatically
applies an
[
(email) type indicator
when you enter an email address.
8
9
SELECT
RECORD
(+)
select the number type
(+
)
record a voice name for the entry,
if desired
or
See “Recording a Voice Name For a
Phonebook Entry” on page 75.
Go to step 10 if
you do not want to
record a voice name Note: This option is not available for
for the entry
entries stored on a SIM card.
scroll to Speed No., the number to
speed dial the entry
10
S
The next available speed dial
number is assigned to a new
phonebook number by default.
11 CHANGE
12 OK
(
+
)
select Speed No. if you want to
change it
(
+
)
save the modified speed number
If your chosen speed number is
already assigned to another entry,
you are asked if you want to replace
that entry.
72 - Phonebook
Press
To
13 CHANGE
(+)
select Icon ID
Note: This option is not
available for entries
stored on a SIM card.
14 SELECT
(+
)
select the icon
15 CHANGE
(+
)
select Ringer ID
Note: This option is not available for
entries stored on a SIM card.
16 SELECT
(+
)
select the ring tone
17 SELECT
(+
)
select MORE if you want to create
another entry with the same Name
Notes: You must enter a name and
number to use this option.
Find the Feature
M
M
>
>
>
Phonebook
New
Phone Number or
Email Address or
Mailing List
Phonebook - 73
Phonebook item
Name
Description
a name for the phonebook entry
(see “Entering Text” on page 41)
No.,
Email, or Members
the phone number or email address,
or select phonebook entries to add
as members of the mailing list
Type
the type of phone number (only for
phone numbers not stored on the
SIM)
Voice Name
Speed No.
record a voice name for the entry.
See “Recording a Voice Name For a
Phonebook Entry” on page 75.
the number you use to speed dial
the entry Entries with a speed dial
number from 1 to 100 are stored on
the phone. Entries with a speed dial
number of 101 or higher are stored
on the SIM card.
the icon that should appear when
you receive calls or messages from
this entry
Icon ID
Ringer ID
More
the alert your phone should use
when you receive calls or messages
from this entry
create another entry with the same
Name
74 - Phonebook
Recording a Voice Name For a
Phonebook Entry
You can record a voice name when you create a new phonebook entry, or
when you edit a previously stored phonebook entry. This lets you use
voice dial to call the number without dialing (see “Voice Dial” on page 76).
Note: You cannot record a voice name for an entry stored on a SIM card.
Make your voice recording in a quiet location. Hold the phone about four
inches (10 centimeters) from your mouth, and speak directly into the
phone’s microphone in a normal tone of voice.
Find the Feature
M
>
Phonebook
Do This
To
scroll to the entry that needs a voice
name
1
Press
S
2
3
Press VIEW
Press EDIT
Press
Press RECORD
(
+
)
display the entry’s detailed view
edit the phonebook entry
scroll to Voice Name
(
+)
4
5
S
(+
)
begin the recording process
The phone displays Press RECORD Key
then say name
.
6
7
Press and release
RECORD ), then
say the entry’s name
(in two seconds)
record the voice name
(+
The phone displays Press RECORD Key
then REPEAT name
.
Press RECORD
and repeat
the name
(+
)
confirm the voice name
The phone displays Trained: Voice
Name
.
Phonebook - 75
Dialing a Phonebook Entry
You can use the phonebook list, voice dial, speed dial, or 1-touch dial to
call a number stored in your phonebook. To use speed dial, see “Speed
Dialing” on page 56. To use 1-touch dial, see “One-Touch Dialing” on
page 56.
Phonebook List
Find the Feature
M
>
Phonebook
Voice Dial
Select the entry and press
N.
Voice Dial
Find the Feature
M
>
Say the pre-recorded phonebook entry name.
Editing a Phonebook Entry
You can edit a phonebook entry stored on your phone or the SIM card. If
you change an entry’s speed dial number, the entry is moved to the new
speed dial location and the original entry is deleted.
Note: You can also use the following procedure to edit a fixed dial entry by
scrolling to and selecting Fix Dial
.
Find the Feature
M
>
Phonebook
Select the entry and press
M
>
Edit or Delete.
For a description of the items in a phonebook entry or fixed dial entry, see
“Items in a Phonebook Entry” on page 69 and “Storing a Phonebook
Entry” on page 70.
76 - Phonebook
Customizing Your Phone
Settings
You can adjust your phone’s menus and features.
Customizing Menus
You can customize the order of the items in your phone’s main menu,
depending upon your usage.
Find the Feature
M
>
>
Settings
Personalise
>
Other Settings
Main Menu
>
Select an item and press GRAB
press INSERT ).
(+), then scroll to its new location and
(
+
Selecting a Different Language
You can select a different language for your phone’s display:
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
Language
>
Customizing Your Phone Settings - 77
Using MyMenu
MyMenu lets you quickly access your favorite menu features. MyMenu is
pre-programmed with shortcuts to several features (see “Shortcuts” on
page 3), but you can add more.
You can use MyMenu from the idle display, while on a call, or while
scrolling through a menu. Press
through 99).
M
and then the MyMenu key number
(
1
To add a menu item to the MyMenu list, select the item and hold
the phone asks you for a confirmation.
M
until
78 - Customizing Your Phone Settings
Getting More Out of Your Phone
Dialing Options
Fixed Dialing
When you activate the fixed dial feature, users can only call
the numbers in the fixed dial list.
Find the Feature
M
>
>
Settings
Fixed Dial
>
Security
Fixed dial list entries can be any length. If there is a fixed dial entry for the
digits 555, users can call any number that starts with 555. You must enter
your SIM PIN2 code, from your network service provider, to edit fixed dial
entries.
Find the Feature
M
>
Fixed Dial
In the fixed dial list, you can create, edit, delete, and sort entries just like in
the phonebook list. Fixed dial list entries are stored on your SIM card and
do not have Type or Voice Name fields.
Getting More Out of Your Phone - 79
Managing Your Calls
Calling a Number in a Text Message
If you receive a text message with an embedded phone
number, you can dial the number directly.
Note: You must set up the text message inbox before you can receive text
messages. See “Setting Up the Text Message Inbox” on page 62.
Find the Feature
M
>
Messages > Text Msgs
Press
To
scroll to the message with the
number
1
S
2
3
4
M
open the Text Msg Menu
scroll to Call Back
S
SELECT
(
+
)
dial the number in the message
If the message contains more than one phone number, press
S
to scroll
to a number, then press SELECT
(-) to dial.
Sending DTMF Tones
While you are on a call, you can send keypresses as tones by pressing
Send Tones
M
>
.
To set DTMF tones to be long, short, or off:
Find the Feature
M
>
>
Settings
Initial Setup
>
Other Settings
DTMF
>
80 - Getting More Out of Your Phone
Monitoring Phone Use
Network connection time is the elapsed time from the moment you
connect to your service provider’s network to the moment you end the call
by pressing
O. This time includes busy signals and ringing.
The amount of network connection time you track on your resettable
timer may not equal the amount of time for which you are billed by
your service provider. For billing information, please contact your
service provider directly.
To view a call timer:
Find the Feature
M
>
Recent Calls > Call Times
You can view the approximate network connection time elapsed during the
following calls:
Timer
Last Call
Description
Time spent on the last call dialed or
received. You cannot reset this timer.
Dialled Calls
Received Calls
All Calls
Total time spent on dialed calls since the
last time you reset this timer.
Total time spent on calls received since
the last time you reset this timer.
Total time spent on dialed and received
calls since the last time you reset this
timer.
Lifetime
Total time spent on all calls on this phone.
You cannot reset this timer.
Getting More Out of Your Phone - 81
Viewing and Resetting Call Costs
To view a cost tracker:
Find the Feature
M
>
Recent Calls > Call Cost
Press
To
scroll to the cost tracker you want to
view
1
S
2
SELECT
(
+
)
view the recorded cost
To reset the cost tracker:
Press
To
1
RESET
(+
)
reset the cost (if available)
2
OK
(
-
)
enter your PIN2 code to confirm the
reset
Network Features
Data Calls
A Motorola Original™ data kit lets you transfer data between your
phone and a computer or other external device. You can:
•
•
use your phone as a modem to connect to the Internet
Note: 56K modems are capable of receiving 56Kbps from a
compatible service provider.
use your phone to make and answer data calls on your computer or
hand-held device.
82 - Getting More Out of Your Phone
Connecting Your Phone to an External Device
Connect your phone to an external device (such as a computer or
hand-held device) using a USB cable.
Note: Not all devices are compatible with USB cable connections. Check
your external device for specifications.
Attach the cable and do the following:
To Establish a Connection
1
Check the phone
make sure that the phone is
connected and powered on
2
Open the application place the call through the
on your computer
application (such as
dial-up-networking)
Note: You cannot dial data numbers
through your phone’s keypad. You
must dial them through your
computer.
3
End the transfer on close the call and connection when
your computer the transfer is complete
Network Selection
You can view and adjust your phone’s network settings:
Find the Feature
M
>
>
Settings
Network
>
Other Settings
Your service provider registers your phone to a network. You can view
information about the current network, change how your phone searches
for a network, specify your preferred networks, and activate alerts that
indicate when a call is dropped or network registration changes.
Getting More Out of Your Phone - 83
84 - Getting More Out of Your Phone
Security
Line Security
If your phone displays Line Not Secure while you are on a call, your phone
has detected another device monitoring the call. This message does not
appear when caller ID, call cost, or other information fills the display.
Locking and Unlocking Your Phone
A locked phone still rings or vibrates for incoming calls or messages, but
you must unlock it to answer.
Lock Your Phone Manually
Find the Feature
M
>
>
Settings
Phone Lock
>
Security
Lock Now
>
Set Your Phone to Lock Automatically
You can set your phone to lock every time you turn it off:
Find the Feature
M
>
>
>
Settings
Phone Lock
On
>
Security
Automatic Lock
>
Security - 85
Changing Your Unlock Code
Your phone’s four-digit unlock code is originally set to 1234, and the
six-digit security code is originally set to 000000. Your service provider
may reset these numbers before you receive your phone.
If your service provider has not reset these numbers, we recommend that
you change them to prevent other users from accessing your personal
information or modifying your phone settings. The unlock code must
contain four digits, and the security code must contain six digits. Be sure
to make a note of the new numbers.
Find the Feature
M
>
>
Settings
New Passwords
>
Security
> the password
Notes:
•
Your service provider may retain your phone’s security code for
customer service purposes. In this case, you will not be able to use
phone features that require you to enter the security code (such as
master clear, master reset, and the unlock code bypass feature).
•
If the only password you can change is the unlock code, the
New Passwords menu is unavailable and the Unlock Code option
appears on the Phone Lock menu. In this case, open the unlock code
editor by selecting:
Unlock Code
M
>
Settings
>
Security Phone Lock
>
>
.
To change a code or password:
Find the Feature
M
>
>
Settings
New Passwords
>
Security
86 - Security
Press
To
scroll to the code or password you
want to change
1
S
2
3
CHANGE
(
+
)
select the code or password
enter your old code
keypad keys
If you do not know your code, see “If
You Forget a Code or Password” on
page 87.
4
5
6
7
8
OK
keypad keys
OK
keypad keys
OK
(
+
)
submit your old code
enter the new code
assign the new code
re-enter the new code
confirm the new code
(
+
)
(
+)
If You Forget a Code or Password
If you forget your security code (originally set to 000000), SIM PIN, SIM
PIN2, or call barring password, contact your service provider.
If you forget your unlock code, try entering 1234 or the last four digits of
your phone number. If that does not work, press
M
and enter your
security code when you see the Enter Unlock Code message. See your
service provider if you do not know your security code.
Security - 87
Protecting the SIM Card
When the SIM PIN feature is activated, you must enter your SIM card PIN
code each time you turn on the phone or insert a SIM card.Your SIM card
PIN code is given to you by your service provider.
Find the Feature
M
>
>
Settings
SIM PIN
>
Security
>
On or Off
Unblock the SIM Card PIN Code
If you enter an incorrect SIM card PIN code three times in a row, your SIM
card is disabled and your phone displays the message SIM Blocked. You
need to enter a PIN unblocking key (PUK) code, which you can obtain
from your service provider.
Note: In the following key sequence, each key press must occur within
two seconds of the previous keypress.
Caution: If the unblocking attempt is tried unsuccessfully 10 times, the
SIM card is permanently disabled and your phone displays the message
SIM Disabled
.
88 - Security
Press
To
1
# # 0
open the PIN unblocking editor
5 *
Your phone prompts you to enter
the PIN1 Unblock Sequence:
.
2
3
keypad keys
enter the PUK code
OK
(
+
)
submit the PUK code
Your phone prompts you to Enter
New SIM PIN:
.
4
5
keypad keys
enter a new SIM card PIN code
Note: The SIM PIN code must be
between four and eight digits in
length.
OK
(
+
)
assign the new SIM PIN code
Your phone prompts you to
Re-enter New SIM PIN:
.
6
7
keypad keys
OK
re-enter your SIM card PIN code
(
+
)
confirm the new SIM PIN code and
unblock the SIM card
Security - 89
Protecting Web Transactions
The WAP Identity Module (WIM) contains information for e-commerce and
other Internet security.
If WIM security is On, your phone prompts you for your WIM PIN whenever
you turn on your phone or insert a new SIM card. To turn WIM security on
or off:
Find the Feature
M
>
>
Settings
WIM PIN
>
Security
To change your WIM PIN, see “Changing Your Unlock Code” on page 86.
90 - Security
Personal Organizer Features
Datebook
The datebook is a calendar that lets you schedule and organize events
such as appointments and meetings. You can review your schedule of
events for the week or by the day, and have the datebook play a reminder
alarm for specific events.
Note: You must set the phone’s correct time and date in order to use the
datebook (see “Setting the Time and Date” on page 35).
To schedule or review events in the datebook:
Find the Feature
M
>
Datebook
Viewing by the Week
When you open the datebook, your phone displays a calendar for the
week. Lines or filled boxes under each day indicate scheduled events.
Untimed
event
Days of week
(press
to select)
5
{
E
}
*
or
#
9 JAN-15 JAN
S
M
T
W
T
F
S
12 hour
window
One-hour event
M
EXIT
VIEW
Go to
selected day
Exit the
datebook
Full day (12-hour)
event scheduled
Press
the Datebook Menu
M
to open
Personal Organizer Features - 91
Viewing by the Day
Select a day in the week view and press VIEW
(+) to see the day’s
events. You can store, edit, view, copy, and delete any event from the day
view.
Viewing by the Event
Select an event in the day view and press VIEW
(+) to open the detailed
event view. You can edit, copy, and delete events from the event view.
Storing a New Event
A title is required for a datebook event. All other information is optional.
Find the Feature
M
M
>
>
Datebook > day
New
Enter the event title, start time, duration, date, repeating events, and
reminder.
92 - Personal Organizer Features
Changing Event Information
To change information about an existing event:
Find the Feature
M
>
Datebook
Press
To
scroll to the scheduled event day
1
2
S
VIEW
S
VIEW
(
+
+
)
)
display the day view
scroll to the event to change
3
4
5
6
7
8
9
(
display the event view
edit the event
EDIT
(+)
S
scroll to the detail to change
edit the information
CHANGE
(+)
keypad keys
DONE
enter the new information
(-
)
store the information and return to
the day view
Personal Organizer Features - 93
Copying an Event
To copy information from a current event to a new event:
Find the Feature
M
>
Datebook
Press
To
scroll to the scheduled event day
1
2
3
4
S
VIEW
S
M
(
+
)
display the day view
scroll to the event to copy
open the Datebook Menu
scroll to Copy
5
6
7
S
SELECT
(
+
)
copy the event
YES
(+
)
confirm the copy
Your phone assumes that you want
to change the date, and displays the
Date field.
8
9
keypad keys
enter the date information
move to the month, day, and year
save the copy of the event
}
(+
)
10 DONE
11
(
-
)
)
scroll to event details and edit the
information as necessary
S
12 DONE
(-
store the new event and return to
the day view
94 - Personal Organizer Features
Deleting an Event
Find the Feature
M
>
Datebook
Press
To
scroll to the scheduled event day
1
2
3
4
5
6
S
VIEW
S
M
(
+
)
display the day view
scroll to the event to delete
open the Datebook Menu
scroll to Delete
S
SELECT
(+
)
select Delete
For non-repeating events, go to step
7. For repeating events, the phone
displays a delete event menu:
scroll to This Event Only or
Repeat Events
a
S
b
SELECT
(+
)
select the event(s) to delete
confirm the deletion
7
YES
(-)
The phone briefly displays a Deleted:
message and returns you to the day
view.
Personal Organizer Features - 95
Alarm Reminders
Reminders are alerts that ring or vibrate to notify you about a voicemail or
text message you have received, or a datebook event you have
scheduled. To set or turn off reminders:
Find the Feature
M
>
>
Ring Styles > Alert Detail
Reminders > Alert
Note: Beep or Vibrate sets the corresponding reminder alert type. Off turns
off all reminders.
Calculator
You can use your phone as a convenient calculator and currency
converter.
Entered number
Selected function
appears here
5
E
Calculator
Press
S
to
+
0
}
scroll to other
functions
Press
S
to
{
.
C
=
+
-
x
highlight a function
M
EXIT
SELECT
Perform the
highlighted function
Exit the
calculator
Press
M
to open
the Calculator Menu
Converting Currency
The currency converter works just like the calculator, using the
(currency) function and the exchange rate you set:
Find the Feature
M
M
>
>
Calculator
Exchange Rate
96 - Personal Organizer Features
News and Entertainment
Mobile Internet
The Web micro-browser lets you access Web pages and
Web-based applications (such as on-line banking, shopping,
and games) on your phone. Contact your service provider to
set up access, if necessary.
Note: Your phone may be configured to use a high-speed GPRS (General
Packet Radio Service) network connection. This type of connection can be
identified by a GPRS indicator in the idle display that disappears when you
start a micro-browser session. If a
W
(connected call) indicator is displayed
when you start a micro-browser session, your phone is using a standard
voice channel connection. Your network connection charges may vary
depending on the type of connection used.
Create a New Web Session
Use this feature to edit or create a new Web session, or network
connection profile. You can use different Web sessions to connect
to the Internet in different ways.
Find the Feature
M > Web Sessions
To create a Web session, you must configure the following
settings. Contact your service provider to obtain the following
information, if necessary. Actual field names and values may vary
depending on the technologies available to your service provider.
Some settings may not be available for all phone models.
News and Entertainment - 97
Setting
Name
Description
Web session name
Homepage
WAP IP 1
default home page
primary WAP gateway IP
address
WAP Port 1
WAP IP 2
primary WAP port number
secondary WAP gateway IP
address
WAP Port 2
Timeout
secondary WAP port number
time at which the phone exits the
micro-browser application when
no keypress activity is detected
CSD No. 1
primary phone number to use to
set up a CSD (circuit-switched
data) connection
User Name 1
Password 1
Speed (Bps) 1
Line Type 1
CSD No. 2
user name for primary CSD
number
password for primary CSD
number
connection speed for primary
CSD number
line type (modem or ISDN) for
primary CSD number
secondary CSD dial-up phone
number
User Name 2
user name for secondary CSD
number
98 - News and Entertainment
Setting
Password 2
Description
password for secondary CSD
number
Speed (Bps) 2
Line Type 2
GPRS APN
connection speed for secondary
CSD number
line type (modem or ISDN) for
secondary CSD number
GPRS Access Point Name (the
name of the WAP service
provider)
User Name
Password
user name for GPRS APN
connection
password for GPRS APN
connection
News and Entertainment - 99
Starting a Mobile Internet Session
To open the Web micro-browser:
Find the Feature
M
>
Browser
The micro-browser displays the home page set up by your service
provider.
Press
To
scroll to a bookmark or service,
service, or application
1
S
2
SELECT
(
+
)
select the service
Shortcut: If you open a text message with a Web address (URL) in it, you
can go directly to the URL by selecting Go To
M
>
.
If you are unable to establish a network connection with the
micro-browser, contact your service provider.
Interacting With Web Pages
You can perform the following operations on a Web page:
Do This
To
scroll through a page
Press
S
up or down
go back to the previous page or
forward to the next one
Press
left or right
Press
S
M
open the Browser Menu
100 - News and Entertainment
Downloading Pictures, Games, and Sounds
You can download a file such as a ring tone, wallpaper, screensaver,
MotoMixer file, or theme to your phone. You can find files at
www.hellomoto.com and possibly your carrier's site or other sites. To
download files with the browser on a desktop computer or your phone:
Downloading a File Using a Web Browser
1
In the browser, go to the Web site (such as
www.hellomoto.com) and find the file you want.
2
Follow the directions on the site to purchase the file
(payment details vary). The site sends a text message to
your phone, containing the attached file or a URL link to the
file.
3
Open the message and store the file (see “Receiving and
Reading Messages” on page 65).
Notes:
•
•
Call charges apply during download sessions.
When your phone runs out of memory for downloaded files, new files
overwrite the old ones. Downloaded files share your phone’s
memory, so you can make room for a picture, for example, by
deleting ring tones.
News and Entertainment - 101
Assigning Phone Themes
In addition to downloading an individual screen saver, wallpaper, or ring
tones, you can download all three in a bundle, with a theme such as a
special event or a cartoon character.
To download a theme, see “Downloading Pictures, Games, and Sounds”
on page 101. When you receive the theme, you can instantly apply its
screen saver, wallpaper, and ring tone when your phone prompts you to
Apply Now?
Your phone saves the downloaded files so that you can always apply them
as described in “Setting Up Your Phone” on page 34.
Games
Your phone comes with three games. If you get an incoming call,
message, alarm or alert, the game pauses.
Note: You can purchase and download upgraded games from
www.hellomoto.com and possibly your carrier's site or other sites.
Find the Feature
M
>
Games > the game
102 - News and Entertainment
Selecting and Starting a New Game
Find the Feature
M
>
Games > the game
When the game is over, you can play another session of the same game
or return to the games menu. Depending on the game:
Press
To
BACK
(
-—left)
return to the games menu
or
NO
NEW
or
YES
(
-
—left)
(
+
—right)
start another session of the game
you just played
(+
—right)
Ending a Game
You can end a game at any time.
Press
To
BACK
(
-
)
end the game session and return to
the games menu
or
O
News and Entertainment - 103
Playing a Game
Astrosmash
In Astrosmash, your job as Commander is to repel an attack of meteors
and spinning bombs. You try to shoot as many meteors, bombs, missiles,
and flying saucers as possible without getting hit.
Level One: 1500 point limit
Item
Big Rock
Small Rock
Points Item
Points
50
10
20
40
Guided Missile
Small Spinner
80
Big Spinner
Game upgrades remove point limits and add UFOs (100 points) and
Hyperspace.
Rules of the game
•
•
Guided Missiles move toward the Laser Gun.
UFOs appear when the score is greater than or equal to 5,000.
UFOs sweep across the screen and release bombs at the Laser
Gun. The bombs cannot be destroyed
•
•
When you shoot a Big Rock, it breaks into 2 Small Rocks.
When you are out of Laser Guns, the game is over. You lose a Laser
Gun if a spinner (both big and small) hits the ground, or if a rock,
rock pieces, or a guided missile collides with a Laser Gun.
•
Every time the peak score goes up by another 1,000 points, you get
another Laser Gun.
104 - News and Entertainment
How to Play
Press
To
S
move the Laser Gun
8
2
move the Laser Gun to a random position
toggle control for firing between you and the
phone (Auto-Fire)
5
fire the Laser Gun, if Auto-Fire is off
MotoGP
In this game, you are a MotoGP motorcycle racer.
Level One: “Quick Race”, with one lap and one racer
Game upgrades include other racers and tracks, with “Time Attack” (a time
trial with yourself only), and “Grand Prix” (a series of 3 races with other
competitors). You can choose a team and a track.
How to Play
Press
To
S
accellerate, brake, and turn your motorcycle
Snood 21
In this solitaire game, you try to use all the cards in a deck by making
combinations of 21 on any of four columns. When a combination of 21 is
created, the cards are discarded, letting you start another combination
of 21.
Level One: 32 cards, with a one-minute time limit. If the first level is
completed in under 1 minute, you can proceed to the next level.
Game upgrades include more rounds and time limits.
News and Entertainment - 105
Rules of the game
•
•
•
Aces are worth either 1 or 11, Jacks, Queens, and Kings are worth
10, and all other cards are worth the amount written on their faces.
You can place a wild card in any non-frozen column for an
automatic 21.
When the countdown timer reaches 20 seconds, the word HURRY
blinks twice in place of the cards left field. If the timer reaches zero
and there is a card still on the deck, OUT OF TIME appears in place of
the cards left field for 2 seconds and the game is over.
•
The number of cards in a deck depends on the current level: the first
level contains 32 cards (two complete suits plus six wild cards), the
second level contains 45 cards (three complete suits plus six wild
cards), the third and fourth levels contain 58 cards (all four complete
suits plus six wild cards)
•
When there are no more cards in the deck, you score 200 times the
number of cards left in all the columns.
•
•
Every time you place a card, you score 50 points.
Whenever the total of all the cards placed on a column is equal to 21,
you score 100 times the column’s position (21 on the first column
scores 100 points, while 21 on the third column scores 300). 5 cards
totalling less than 21 in a column is treated as 21.
•
•
If the value of the cards in a column is greater than 21, the column is
frozen and marked with an (the column’s total displays BUST).
X
If all the columns become frozen, NO MORE MOVES appears in place of
the cards left field for 2 seconds, and the game is over.
106 - News and Entertainment
How to Play
Press
To
1
place a card on the first column
2
3
4
place a card on the second column
place a card on the third column
place a card on the fourth column
MotoMixer Sound Editor
The MotoMixer lets you edit and save special MIDI-based sound files in
your phone. These sound files include one or more “base tracks,” plus
extra tracks such as "DRUM", "BASS", and "SOLO". The phone comes
preloaded with 10 base tracks (which cannot be edited or deleted), but you
can download others and use them all to create or edit your own MIDI files.
News and Entertainment - 107
Create or Edit a Mix File
To create or edit a MotoMix file:
Find the Feature
M
>
>
Media Centre
[New Mix]
>
MotoMixer
or a tune to edit
Press
To
scroll to [New Mix] or the file you
want to edit
1
S
2
3
SELECT
(
(
+
+
)
)
open the Mix file editor
scroll to a track you want to include
in the new mix
S
4
5
6
SELECT
select the first base track
CHANGE
(
+
)
select Name
keypad keys
enter a name for the mix file you are
creating (see “Entering Text” on
page 41)
7
8
9
OK
(
+
)
store the name
CHANGE
(
+
)
)
select Tempo
*#
move the tempo setting
store the tempo setting
10 OK
(
+
)
11 CHANGE
(
+
play the file and open the base
track editor
12 keypad keys
edit the base tracks (see the
following section)
13 BACK
(
-
)
close the base track editor
close the Mix file display
14 DONE
(-)
108 - News and Entertainment
Base Track Editing Display and Keys
Turn instruments on or off, add effects or pick an instrument variant using
your phone's keypad.
First column:
on/off
Second column:
adds effect
Third column:
sets instrument variant
Name of base
track
1Drum
2Bass
3Harm
4Solo
BACK
1 2 3
4 5 6
7 8 9
* 0 #
PLAY
M
Keys
Effects
1
Turns first track (1Drum in example) on/off
2
3
4
5
6
7
8
9
*
0
#
Adds effect to first track
Sets instrument variant for first track
Turns second track (2Bass in example) on/off
Adds effect to second track
Sets instrument variant for second track
Turns third track (3Harm in example) on/off
Adds effect to third track
Sets instrument variant for third track
Turns fourth track (4Solo in example) on/off
Adds effect to fourth track
Sets instrument variant for fourth track
News and Entertainment - 109
Note: To download new MotoMixer files, see “Downloading Pictures,
Games, and Sounds” on page 101.
You can also press:
PLAY
BACK
(
+
)
Plays the track once
(
-
)
Returns to the Mix file display
Opens the Mix menu, which lets you reset one
or all tracks
M
(M)
Use or Delete a Mix File
To use, rename, or delete a Mix file:
Find the Feature
M
>
Media Centre > Groove Tunes
Press
To
scroll to the file you want
1
2
3
S
M
open the Mix file menu
scroll to Delete
Set as Ring Tone
select the option
,
Play, or
S
4
SELECT
(+)
110 - News and Entertainment
Creating Alert Tones
The My Tones feature lets you create up to 32 custom alert tones for your
phone. The tones you create appear in the list of available alerts (see
“Choosing Alert and Ring Tones” on page 35).
Creating a Tone
Find the Feature
M
>
>
Ring Styles
[New Tone]
>
My Tones
Press
To
1
CHANGE
(+
)
select Notes
2
keypad keys
enter notes for the tone(see
“Entering Notes” on page 112)
3
4
5
6
7
OK
(
+
)
(
store the notes
CHANGE
+
)
select Name
keypad keys
enter the name for the tone
store the name
store the tone
OK
(
+
)
DONE
(-)
News and Entertainment - 111
Entering Notes
To create a new tone, use the keypad keys to enter each note. Press a key
multiple times to cycle through its available notes or options (pitch, octave,
or length). The default setting for a new tone is a quarter note in octave
two.
Key
Displays
Description
1
2
3
4
7
0
S
1
,
2
,
3
set octave one, two, or three
A
,
B
,
C
,
2
note A, B, C, or set octave 2
note D, E, F, or set octave 3
note G or rest
D
,
E
R
,
,
F,
3
G
,
#
b
sharp or flat
q
,
h
,
w
quarter, half, whole note/rest
move cursor left or right
112 - News and Entertainment
Enter a note as follows:
Task
Action
Change the octave Set the new octave (
1,
2
, or 3) before
selecting the note. The new octave
applies to the note and all following notes
until you change it again.
Select the note
(required)
Press a keypad key to enter a note.
Change a note to a Enter a sharp or flat (
#
or b) after
sharp or flat
selecting the note.
Some sharps and flats are played as
standard notes. For example, B# is the
same as
notes when entering a new note.
Set the new length ( , or ) after
selecting the note. The new length
applies to the note and all following notes
until you change it again.
C
. Press
S
to scroll to valid
Change a note’s
length
h
,
w
q
Add a rest
Enter one or more rests (
needed in the tone sequence. You can set
the length of the rest by entering an
or character after the rest, just as you
can for a note.
Press to enter the Compose Menu, and
R
characters) as
h
,
w,
q
Listen to a new
tone as you
compose it
M
select Play All to play the notes you have
entered.
News and Entertainment - 113
Example
Press these keys to play this sequence of notes and rests in octave three:
C (quarter note), E flat (quarter note), half rest, and G (whole note):
Press
To
Display
1
2
1 1 1
set octave three
3
2 2 2
enter a quarter
note C
C
3
4
5
3 3 7
7
enter a quarter note E Eb
flat
4 4 0
0
enter a half rest
Rh
4 0 0
0
enter a whole note G Gw
114 - News and Entertainment
Playing a Tone
Find the Feature
M
>
>
Settings
Ring/Vibrate My Tones
>
Press
To
scroll to the tone you want to play
1
2
3
4
S
M
open the My Tones Menu
scroll to Play
S
SELECT
(+
)
select Play
The phone displays the playback
meter and plays the tone.
5
PLAY
(
+
)
play the tone again
or
CANCEL
(-
)
return to the My Tones list
Editing a Tone
You cannot edit the standard alert tones included with your phone. To edit
a custom tone that you created:
Find the Feature
M
>
>
Settings
Ring/Vibrate My Tones
>
News and Entertainment - 115
Press
To
scroll to the tone you want to edit
1
2
3
S
EDIT
(+
)
open the tone details
scroll to the details you want to edit
S
(Name or Notes)
4
5
CHANGE
(
+
)
select the details you want to edit
keypad keys
enter new text or notes (see
“Entering Notes” on page 112)
6
OK
(
+
)
store the details
Deleting a Tone
You cannot delete the standard alert tones included with your phone. To
delete a custom tone that you created:
Find the Feature
M
>
>
Ring Styles
My Tones
Press
To
scroll to the tone you want to delete
1
2
S
M
open the My Tones Menu
scroll to Delete
3
4
5
S
SELECT
(
+
)
select Delete
YES
(-
)
confirm the deletion
116 - News and Entertainment
SIM Applications
You can access information and applications stored on your
SIM card.
To access the available applications:
Find the Feature
M
>
SIM Applications
Your SIM card may contain applications that process your outgoing calls,
text messages, and other events. Contact your service provider for details.
Note: To download new applications, see “Downloading Pictures, Games,
and Sounds” on page 101.
News and Entertainment - 117
118 - News and Entertainment
Troubleshooting
Check these questions first if you have problems with your phone:
Question
Answer
Is your battery
charged? Do you
The battery level indicator should have at
least one segment showing (C). If it
see
display?
B
in the
does not, recharge your battery. (See
“Charging the Phone” on page 26 and
“Battery Use” on page 27.)
Do you have a
valid SIM card
inserted in your
phone?
If necessary, turn off your phone and
make sure that you have inserted a valid
SIM card. (See “Changing Your SIM
Card” on page 22).
Does the handset The signal strength indicator should have
have a signal? Do
you see in the
display?
at least one segment showing (1). If it
j
does not, move to an area with a stronger
signal to use your phone.
Is the earpiece
While on a call, press the side of
volume too low?
the
S
Is the other party Your phone may be muted. Press
key.
unable to hear
you?
UNMUTE
phone.
(+) if necessary to unmute the
Also, make sure that your phone’s
microphone is not blocked by its carrying
case or a sticker.
Troubleshooting - 119
Question
Answer
Has the phone
been damaged,
dropped, or
gotten wet?
Dropping your phone, getting it wet, or
using a non-Motorola battery charger can
damage the phone. The phone’s limited
warranty does not cover liquid damage or
damage caused from using non-Motorola
accessories.
Was a
non-Motorola
battery charger
used?
120 - Troubleshooting
Specific Absorption Rate Data
This model phone meets international standards for exposure
to radio waves
Your mobile phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed limits for exposure to radio
frequency (RF) energy.
These limits are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population.
The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies.
The guidelines include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR.
Under the guidelines for your phone model, the SAR limit is 2.0 W/kg.*
Tests for SAR are conducted in accordance with CENELEC** testing
procedures using standard operating positions with the phone transmitting
at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the
actual SAR of the phone while operating can be well below the maximum
value.
This is because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network.
Specific Absorption Rate Data - 121
In general, the closer you are to a base station, the lower the power output
of the phone.
Before a phone model is available for sale to the public, it is tested to
confirm compliance with the guidelines.
The tests are performed in positions and locations (e.g., at the ear and
worn on the body) that conform to a uniform testing methodology
determined by an expert standards body.
The highest SAR value for this model phone when tested for use at the ear
is: 0.55 W/kg.***
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the governmental requirements for
safe exposure.
Please note that modifications to this product model could cause
differences in the SAR value for later products; in all cases, products are
designed to be within the guidelines.
*
The SAR limit recommended by international guidelines (ICNIRP) for
mobile phones used by the public is 2.0 watts/kilogram (W/kg)
averaged over ten grams of tissue.The limit incorporates a substantial
margin for safety to give additional protection for the public and to
account for any variations in measurements.
** CENELEC is a European Union standards body.
*** Additional related information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for this
product.
122 - Specific Absorption Rate Data
Index
A
extending battery life
27, 37, 38
accessories
connector ports 1
level indicator 27, 31,
32
browse text mode 42
browser. See
micro-browser
C
optional 21, 39, 82
Add Digits feature 53
alert
creating 111–116
defined 35
indicators 33, 35
reminders 96
calculator 96
calendar. See datebook
call
type, selecting 36
alert profile 36
animation 38, 101
appointments. See
datebook
Astrosmash 104
Attach Number feature 53
B
adding digits after
phone
number 53
alert profile, setting 36
alert type,
selecting 36
alert, creating
111–116
backlight 37
barring calls 58
battery
answering 30
barring 58
charging 26–27
call waiting 57
costs 82
Index - 123
deleting 51
dialed calls list 51
dialing 29
calling line identification.
See caller ID
car kit
dialing a recent call 51
emergency number
50
automatic answer 40
automatic hands-free
40
ending 29, 30
hold 59
making 29
clock 31
codes. See passwords
computer
placing 29
connecting to phone
83
received calls list 51
receiving 30
recent calls 51
storing 51
timing 81
transferring 58
unanswered call 54
conference call 58
contrast, display 37, 38
cost trackers 82
currency converter 96
customizing the menu 77
D
call barring 58
data call
call cost information 82
call forwarding 57
call timers 81
connectingtoexternal
device 83
sending 83
call waiting 57
caller ID
date, setting 35
datebook
incoming calls 49
outgoing calls 53
adding an event 92
calendar 91
124 - Index
changing event infor-
mation 93
E
earpiece
copying an event 94
day view 92
deleting an event 95
event view 92
reminders 96
week view 91
illustration 1
volume, adjusting 28
email address, storing in
phonebook 70
emergency number 50
end key
Datebook Menu 91
default passwords 86
deleting a call 51
dialed calls list 51
dialing a number 29
display
functions 1, 28, 29, 30
ending a call 29, 30
Enter Unlock Code
message 87
Entry Method menu 46
event alert 36
animation 38
backlight 37
exchange rate,
calculating 96
contrast 37, 38
described 31–33
frozen 26
external device
connecting to phone
83
greeting 35
F
idle display 31
illustration 31
language 77
factory settings,
resetting 38–39
fixed dial
resetting 26
defined 79
DTMF tones 52, 53, 80
dialing numbers 79
Index - 125
editing an entry 76, 79 inbox,
storing an entry 70
forwarding calls 57
frequency, changing 83
G
text message 62–63
Incoming Call message
49
indicators
games 102–107
GPRS indicator
displayed 97
alert setting 33, 35
battery level 27, 31,
32
GPRS, defined 97
greeting, display 35
H
GPRS 97
menu 31, 33
message 32
hands-free mode
automatic answer 40
automatic call routing
40
message waiting 31
missed call 54
ring alert 33, 35
roam 31, 32
defined 39
service 31
headset
signal strength 31
silent alert 33, 35
text entry 32
automatic answer 40
Hide ID feature 53
hold a call 59
I
icon ID 73, 74
idle display, defined 31
transmit 32
vibrate alert 33, 35
voice name 69
iTAP software
activating 46
entering words 47
126 - Index
K
key
master reset 38
menu
end 1, 28, 29, 30
left soft key 1
menu 1
Browser Menu 100
customizing 77
Datebook Menu 91
entering text 41
Entry Method menu
46
navigation 1
right soft key 1
send 1, 29, 30, 52
voice 75
features 79
volume control 28
keypad
volume, setting 36
language, setting 77
Last Calls Menu 52
lists 34
L
My Tones Menu 115,
116
MyMenu 78
navigating 33
Phonebook Menu 69
rearranging features
77
scroll feature 37, 38
Text Msg Menu 67
language, setting 77
Last Calls Menu
opening 52
options 53
left soft key
functions 1
lock
phone 85
SIM card 88
loud ring alert 33, 35
M
menu indicator
defined 33
illustration 31
making a call 29
master clear 39
menu key 1
Index - 127
message
deleting 67
go back to previous
page 100
dialing number from
80
picture 101
sound 101
inbox setup 62–63
locking 67
starting 100
Web sessions 97–99
outbox 65
microphone 1
reading 67
mindblaster 104
missed call indicator 54
Missed Calls message 54
moto GP 105
my tones 111–116
My Tones Menu 115, 116
N
receiving 65
reminders, text
message 96
reminders, voicemail
55, 96
sending 64
status 65
navigation key 1
network settings 83
numeric text mode 42
O
voicemail 54–56
message indicator
defined 32
message waiting indicator 1-touch dial
illustration 31
micro-browser
defined 56
setting preference 56
using 56
animation 101
Browser Menu 100
optional accessory,
browser setup 97–99 defined 21
defined 97
functions 100
optional feature, defined 21
outbox 65
128 - Index
P
unlock code 87
unlocking 28, 85
passwords
changing 86
phone number
default 86
if you forget a
adding digits after 53
attaching two
numbers 53
password 87
phone
accessories,
optional 21
redialing 49
sending text message
to 64
connectingto external
device 83
storing in phonebook
70–74
date, setting 35
erase user-entered in-
formation 39
phonebook
attaching two
numbers 53
frequency,
dialing a number 76
editing an entry 76
email address 69
entry name 69
fields 69
icon ID 73, 74
number type indicator
69
1-touch dial 56
phone number 69
speeddialnumber56,
72, 74
changing 83
language, setting 77
locking 85
network settings 83
1-touch dial 56
passwords 86, 87
reset all options 38
speed dial, using 56
startup greeting 35
text entry indicator 32
time, setting 35
Index - 129
speed dial, using 56
storing an entry
70–74
voice name entry 75
voice name indicator
69
recent calls 51
redial
busy number 49
reminders
setting 96
text message 96
voicemail message
55, 96
Phonebook Menu 69
picture
storing 101
PIN code
resetting display 26
right soft key
functions 1
activating/deactivat-
ing 88
ring alert
protecting the SIM
card 88
creating 111–116
indicators 33, 35
setting 36
unblocking 88
PIN2 code 79
predictive text entry
activating 46
entering words 47
profile
type, selecting 36
ring and vibrate alert
indicator 33
ringer
setting 36
customizing 36
setting 36
volume, adjusting 28,
36
PUK code 88
R
roam indicator
defined 32
received calls list 51
receiving a call 30
illustration 31
130 - Index
S
SIM Disabled
message 89
unblocking 88
SIM Disabled message 89
SIM PIN code
activating/
scroll feature 37, 38
send key 1, 29, 30, 52
sending a call. See
making a call
service indicator
illustration 31
deactivating
short message service.
See text message
Show ID feature 53
signal strength indicator
defined 31
88
protecting the SIM
card 88
unblocking 88
SIM PIN2 code 79
SMS. See text message
illustration 31
silent alert indicator 33, 35 snood 21 105
SIM applications 117
SIM Blocked message 28,
88
soft keys
illustration 1
soft ring alert 33, 35
sound
SIM card
applications 117
defined 22
storing 101
speed dial
precautions 22
protecting 88
SIM Blocked mes-
sage 28, 88
changing number 72,
74
number, defined 56
using 56
storing a call 51
symbol text mode 45–46
Index - 131
symbols, entering 45–46
T
reading 67
receiving 65
tap method text entry 42
text
reminders 96
sending 64
browse mode 42
character chart 41
status 65
text mode, changing 42
entering from keypad Text Msg Menu
41
entry mode, changing
42
opening 67
options 66
themes 102
iTAP software
predictive
time, setting 35
timers 81
text entry 46
transfer a call 58
transmit indicator
defined 32
travel charger, using 27
U
numeric mode 42
symbol chart 46
symbol mode 45–46
tap method 42
text entry indicator
defined 32
unblocking the SIM card
88
text message
deleting 67
unlock code 85, 87
V
dialing number from
80
inbox setup 62–63
locking 67
vibrate alert
indicator 33, 35
setting 36
type, selecting 36
132 - Index
voice dial
dialing a number 76
recording voice name
75
voice name
defined 75
phonebook indicator
69
recording 75
voicemail 54–56
volume
earpiece 28
keypad 36
ringer 28, 36
W
Web pages 100
Web sessions 97–99
Index - 133
6809448A44
134 - Index
|