Kyocera Wild Card User Manual

Your wireless phone is a radio transmitter and  
receiver. It is designed and manufactured to not  
exceed the emission limits for exposure to radio  
frequency (RF) energy set by the Federal  
Communications Commission of the U.S.  
Government. These limits are part of  
Body-worn measurements differ among phone  
models, depending upon availability of accessories  
and FCC requirements. While there may be  
differences between the SAR levels of various  
phones and at various positions, they all meet the  
government requirement for safe exposure.  
comprehensive guidelines and establish permitted  
levels of RF energy for the general population. The  
guidelines are based on standards that were  
developed by independent scientific organizations  
through periodic and thorough evaluation of  
scientific studies. The standards include a  
substantial safety margin designed to assure the  
safety of all persons, regardless of age and health.  
The FCC has granted an Equipment Authorization  
for this model phone with all reported SAR levels  
evaluated as in compliance with the FCC RF  
emission guidelines. SAR information on this model  
phone is on file with the FCC and can be found  
under the Display Grant section  
www.fcc.gov/oet/fccid after searching on the  
FCC ID: OVFKWC-M1000-2J0.  
The exposure standard for wireless mobile phones  
employs a unit of measurement known as the  
Specific Absorption Rate, or SAR. The SAR limit set  
by the FCC is 1.6 W/kg.*  
Additional information on SAR can be found on the  
Cellular Telecommunications and Internet  
Association (CTIA) web-site at  
Tests for SAR are conducted using standard  
operating positions specified by the FCC with the  
phone transmitting at its highest certified power  
level in all tested frequency bands.  
* In the United States and Canada, the SAR limit for  
mobile phones used by the public is 1.6 watts/kg  
(W/kg) averaged over one gram of tissue. The  
standard incorporates a substantial margin of  
safety to give additional protection for the public  
and to account for any variations in measurements.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value.  
Caution  
The user is cautioned that changes or modifications  
not expressly approved by the party responsible for  
compliance could void the warranty and user’s  
authority to operate the equipment.  
This is because the phone is designed to operate at  
multiple power levels so as to use only the power  
required to reach the network. In general, the closer  
you are to a wireless base station antenna, the  
lower the power output.  
Optimize your phone’s performance  
Before a phone model is available for sale to the  
public, it must be tested and certified by the FCC  
that it does not exceed the limit established by the  
government-adopted requirement for safe  
exposure. The tests are performed in positions and  
locations (e.g., at the ear and worn on the body) as  
required by the FCC for each model.  
Use the guidelines in this guide to learn how to  
optimize the performance and life of your phone  
and battery.  
Air bags  
If you have an air bag, DO NOT place installed or  
portable phone equipment or other objects over the  
air bag or in the air bag deployment area. If  
equipment is not properly installed, you and your  
passengers risk serious injury.  
User Guide  
iii  
Vehicles—RF signals may affect improperly  
installed or inadequately shielded electronic  
systems in motor vehicles. Check with the  
manufacturer of the device to determine if it is  
adequately shielded from external RF energy. Your  
auto manufacturer may be able to help you obtain  
this information.  
Medical devices  
Pacemakers—Warning to pacemaker wearers:  
Wireless phones, when in the ‘on’ position, have  
been shown to interfere with pacemakers. The  
phone should be kept at least six (6) inches away  
from the pacemaker to reduce risk.  
The Health Industry Manufacturers Association and  
the wireless technology research community  
recommend that you follow these guidelines to  
minimize the potential for interference.  
Blasting areas—Turn off your phone where  
blasting is in progress. Observe restrictions, and  
follow any regulations or rules.  
Potentially explosive atmospheres—Turn off your  
phone when you are in any area with a potentially  
explosive atmosphere. Obey all signs and  
instructions. Sparks in such areas could cause  
an explosion or fire, resulting in bodily injury or  
death.Areas with a potentially explosive  
atmosphere are often, but not always,  
clearly marked.  
Always keep the phone at least six inches  
(15 centimeters) away from your pacemaker  
when the phone is turned on.  
Do not carry your phone near your heart.  
Use the ear opposite the pacemaker.  
If you have any reason to suspect that  
interference is taking place, turn off your  
phone immediately.  
They include:  
Hearing aids—Some digital wireless phones may  
interfere with hearing aids. In the event of such  
interference, you may want to consult Virgin  
Mobile or call the customer service line to  
discuss alternatives.  
fueling areas such as gas stations  
below deck on boats  
transfer or storage facilities for fuel or chemicals  
vehicles using liquefied petroleum gas, such as  
propane or butane  
Other medical devices—If you use any other  
personal medical device, consult the manufacturer  
of the device to determine if it is adequately  
shielded from external RF energy. Your physician  
may be able to help you obtain this information.  
areas where the air contains chemicals or  
particles such as grain, dust, or metal powders  
any other area where you would normally be  
advised to turn off your vehicle engine  
In health care facilities—Turn your phone off in  
health care facilities when instructed. Hospitals and  
health care facilities may be using equipment that is  
sensitive to external RF energy.  
Use with care  
Use only in normal position (to ear). Avoid dropping,  
hitting, bending, or sitting on the phone.  
Keep phone dry  
Potentially unsafe areas  
Keep the phone dry. Damage can result if the  
phone gets wet. Water damage is not covered  
under warranty.  
Posted facilities—Turn your phone off in any  
facility when posted notices require you to do so.  
Aircraft—FCC regulations prohibit using your  
phone on a plane that is in the air. Turn your phone  
off before boarding aircraft.  
iv  
Resetting the phone  
Hearing Aid Compatibility (HAC) features  
If the screen seems frozen and the keypad does not  
respond to keypresses, reset the phone by  
completing the following steps:  
This Virgin Mobile phone has received a HAC  
performance rating (designated by the letter M  
followed by a number). The rating for this phone is  
identified on the outside of this phone’s original  
packaging. While there is no guarantee, digital  
wireless phones that receive a minimum of an M3  
rating should provide acceptable performance with  
most hearing aids. Hearing loss and hearing aids  
are highly individualized, however, so optimal  
performance cannot be guaranteed. Other factors,  
such as type of hearing aid device or degree of  
hearing loss, also can affect a phone’s performance  
for a particular user.  
1. Remove the battery door.  
2. Remove and replace the battery.  
If the problem persists, return the phone to the  
dealer for service.  
Accessories  
Use only Kyocera-approved accessories with  
Kyocera phones. Use of any unauthorized  
accessories may be dangerous and will invalidate  
the phone warranty if said accessories cause  
damage or a defect to the phone.  
Hearing aids and wireless phones  
A hearing aid uses a microphone to collect and  
convert sound waves to electrical signals. The  
hearing aid then amplifies and converts the  
electrical signals back to audible sounds for the  
hearing aid user to hear. Radio Frequency (RF)  
emissions generated by digital wireless phones  
often interfere with the operation of a hearing aid’s  
microphone, distorting the amplified audible sound.  
In addition, hearing aid microphones tend to collect  
ambient noise and amplify these sounds, interfering  
with the desired audio transmission.  
Radio Frequency (RF) energy  
Your telephone is a radio transmitter and receiver.  
When it is on, it receives and sends out RF energy.  
Virgin Mobile’s network controls the power of the  
RF signal. This power level can range from 0.006 to  
0.6 watts. In August 1996, the U.S. Federal  
Communications Commission (FCC) adopted RF  
exposure guidelines with safety levels for hand-held  
wireless phones. These guidelines are consistent  
with the safety standards previously set by both  
U.S. and international standards bodies in the  
following reports:  
ANSI standard  
ANSI C95.1 (American National Standards  
Institute, 1992)  
To diminish interference between wireless phones  
and hearing aids, the FCC requires wireless  
carriers to offer phones that meet the American  
National Standards Institute (ANSI) C63.19  
standard for reduced RF emissions. Wireless  
phones that comply with the FCC’s hearing aid-  
compatibility (HAC) regulations must receive a  
minimum rating of “M3” for RF emissions under the  
ANSI C63.19 standard. The “M” rating refers to the  
phone’s RF emissions level for use with hearing  
aids operating in the microphone setting.  
NCRP Report 86 (National Council on  
Radiation Protection and Measurements, 1986)  
ICNIRP (International Commission on Non-  
Ionizing Radiation Protection, 1996)  
Your phone complies with the standards set by  
these reports and the FCC guidelines.  
E911 mandates  
Where service is available, this handset complies  
with the Phase I and Phase II E911 Mandates  
issued by the FCC.  
User Guide  
v
The higher the phone’s “M” rating, the more likely  
the phone is compatible with a hearing aid  
operating in the microphone setting. Hearing aids  
also have ratings similar to wireless phones.  
Most newer hearing aid models receive at least  
an M2 rating.  
Battery and charger specifications  
Charger  
Input  
Output  
CE90-R2233  
CV90-G2926  
CV90-K0281  
100-240 VAC / 50/60 Hz 5V 350mA  
100-240 VAC / 50/60 Hz 4.5V 1.2A  
100-240 VAC / 50/60 Hz 4.5V 600mA  
To determine the level of compatibility between  
your hearing aid and this Virgin Mobile HAC-  
certified phone, combine the M rating of your  
hearing aid and the M rating of this phone. For  
example, if you pair an M3 hearing aid with an M4  
phone, you will achieve a combined rating of 7.  
Standard Battery (5mm):  
CV90-N3344 3.7V / 900 mAh  
Kyocera Wireless Corp.  
10300 Campus Point Drive  
San Diego, CA 92121 USA  
Any combined rating equal to or greater than 6  
provides excellent performance.  
Any combined rating equal to 5 offers  
good performance.  
To purchase accessories, visit  
Any combined rating equal to 4 offers  
acceptable performance.  
T-Ratings—Phones rated T3 or T4 meet FCC  
requirements and are likely to be more usable with  
a hearing device’s telecoil (“T Switch” or  
“Telephone Switch”) than unrated phones. T4 is the  
better/higher of the two ratings. (Note that not all  
hearing devices have telecoils in them.)  
Hearing devices may also be measured for  
immunity to this type of interference. Your hearing  
device manufacturer or hearing health professional  
may help you choose the proper rating for your  
mobile phone. The more immune your hearing aid  
is, the less likely you are to experience interference  
noise from mobile phones.  
have any additional questions about hearing  
aid-compatibility.  
vi  
Table of Contents  
Working with messages . . . . . . . . . . . . . . . . . . . 27  
Message settings . . . . . . . . . . . . . . . . . . . . . . . . 28  
1
Getting started . . . . . . . . . . . . . . . . . . . . . . 1  
Phone battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Purchasing accessories . . . . . . . . . . . . . . . . . . . .2  
Finding your phone’s serial  
number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Phone activation. . . . . . . . . . . . . . . . . . . . . . . . . .3  
Phone overview . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Main menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Basic navigation . . . . . . . . . . . . . . . . . . . . . . . . .11  
Guide conventions . . . . . . . . . . . . . . . . . . . . . . .11  
6
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Viewing contacts list. . . . . . . . . . . . . . . . . . . . . . 30  
Adding contacts . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Working with contacts . . . . . . . . . . . . . . . . . . . . 31  
Using contact groups . . . . . . . . . . . . . . . . . . . . . 34  
Searching contacts. . . . . . . . . . . . . . . . . . . . . . . 35  
7
8
VirginXL . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Accessing VirginXL. . . . . . . . . . . . . . . . . . . . . . . 36  
Navigating VirginXL . . . . . . . . . . . . . . . . . . . . . . 36  
Ending a VirginXL session . . . . . . . . . . . . . . . . . 36  
2
Basic functions . . . . . . . . . . . . . . . . . . . . 12  
Powering up. . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Making phone calls . . . . . . . . . . . . . . . . . . . . . .12  
Answering phone calls . . . . . . . . . . . . . . . . . . . .12  
Ending phone calls. . . . . . . . . . . . . . . . . . . . . . .13  
Verifying your phone number. . . . . . . . . . . . . . .13  
Activating voice dialing. . . . . . . . . . . . . . . . . . . .13  
Taking a picture. . . . . . . . . . . . . . . . . . . . . . . . .13  
Using custom menu . . . . . . . . . . . . . . . . . . . . . .13  
My Account. . . . . . . . . . . . . . . . . . . . . . . . 37  
Checking your account  
balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Top-Up your account . . . . . . . . . . . . . . . . . . . . . 37  
For more information . . . . . . . . . . . . . . . . . . . . 38  
9
My stuff . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
My ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
My games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
My graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
My other stuff. . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
My sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
3
Call features . . . . . . . . . . . . . . . . . . . . . . . 14  
Volume control . . . . . . . . . . . . . . . . . . . . . . . . .14  
Hold calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Speed dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
1-Touch dialing . . . . . . . . . . . . . . . . . . . . . . . . .14  
Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Emergency services . . . . . . . . . . . . . . . . . . . . . .15  
10 Recent calls . . . . . . . . . . . . . . . . . . . . . . . 41  
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
4
5
Text entry . . . . . . . . . . . . . . . . . . . . . . . . . 16  
QWERTY keypad . . . . . . . . . . . . . . . . . . . . . . . .16  
Number keypad . . . . . . . . . . . . . . . . . . . . . . . . .19  
11 Pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Taking a picture. . . . . . . . . . . . . . . . . . . . . . . . . 43  
Picture mode options. . . . . . . . . . . . . . . . . . . . . 43  
Picture mode indicators  
Messaging . . . . . . . . . . . . . . . . . . . . . . . . 22  
Text messages . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Picture messages . . . . . . . . . . . . . . . . . . . . . . . .24  
Email messages . . . . . . . . . . . . . . . . . . . . . . . . .26  
Instant messages . . . . . . . . . . . . . . . . . . . . . . . .26  
Erasing messages . . . . . . . . . . . . . . . . . . . . . . . .26  
and icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
12 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Menu options. . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Bluetooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
User Guide  
vii  
Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Call options. . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Phone information . . . . . . . . . . . . . . . . . . . . . . 57  
13 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Voice memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Tip calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
14 Voice recognition. . . . . . . . . . . . . . . . . . . 63  
Voice dial list . . . . . . . . . . . . . . . . . . . . . . . . . . 63  
Voice commands. . . . . . . . . . . . . . . . . . . . . . . . 63  
Voice Command Settings. . . . . . . . . . . . . . . . . . 64  
15 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 65  
Customer Support. . . . . . . . . . . . . . . . . . . . . . . 65  
Qualified service . . . . . . . . . . . . . . . . . . . . . . . . 65  
Phone accessories. . . . . . . . . . . . . . . . . . . . . . . 65  
Product evaluation . . . . . . . . . . . . . . . . . . . . . . 65  
16 Consumer Limited Warranty. . . . . . . . . . 66  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68  
viii  
1
Getting started  
Charging the battery  
Phone battery  
You must have at least a partial charge in the  
battery to make or receive calls.  
To charge the battery:  
Connect the AC adapter to the  
jack on the bottom of the  
phone. Do not force the AC  
adapter into the jack. Plug the  
adapter into a wall outlet.  
Installing the battery  
To install the battery:  
1. Hold the phone face down  
and locate the screw on the  
back cover.  
2. Turn the screw to set the  
screw slot in vertical  
position to unlock the  
back cover.  
3. Locate the groove on the  
left side of the phone and  
unsnap the hooks to  
remove the back cover.  
4. Place the battery in the  
phone casing with the  
metal contacts of the  
battery touching those of  
the phone.  
5. Replace the back cover by  
sliding the notches into the  
opening on the left side.  
6. Snap the back panel  
into place.  
The battery icon in the upper-right corner of the  
screen tells you whether the phone is:  
Charging (animated icon)  
Partially charged  
Fully charged  
Warning: The battery does not charge if you use  
the phone while it is connected to an AC adapter.  
Recharging the battery  
You can safely recharge the battery at any time,  
even if it has a partial charge.  
Caring for the battery  
General safety guidelines  
• Do not disassemble or open the battery.  
• Do not crush, bend, deform, puncture, or  
shred the battery.  
• Do not attempt to insert foreign objects into  
the battery.  
7. Set the screw slot in  
horizontal position to lock  
the back cover.  
Note: To remove the battery,  
make sure the phone is powered off.  
User Guide  
1
• Do not immerse the battery or expose it to  
water or other liquids. Even if a battery appears  
to dry out and operate normally, internal parts  
can slowly corrode and pose a safety hazard.  
• Always keep the battery between 15°C and 25°C  
(59°F and 77°F). Do not expose the battery to  
extremes of temperature, fire, or other hazards  
such as a cooking surface, iron, or radiator.  
• Never use any damaged battery.  
• Only use the battery for its intended phone.  
• Only use the battery with a qualified charger. Use  
of an unqualified battery charger may present a  
risk of fire, explosion, leakage, or other hazard.  
If you are unsure about whether a charger is  
qualified, contact customer support.  
• Improper battery use may result in fire,  
explosion, or other hazard.  
Common causes of battery drain  
• Playing games or using the Web.  
• Keeping backlighting on.  
• Taking pictures with the flash on.  
• Operating in digital mode when far away from  
a base station or cell site.  
• Using data cables or accessories.  
• Operating when no service is available, or  
service is available intermittently.  
• High earpiece and ringtone volume settings.  
• Repeating sound, vibration, or lighted alerts.  
• Extensive use of flashlight option.  
• Do not short-circuit the battery or allow metallic  
conductive objects—such as keys, coins, or  
jewelry—to contact the battery’s terminals.  
• Replace the battery only with another qualified  
battery. Use of an unqualified battery may  
present a risk of fire, explosion, leakage, or  
other hazard. If you are unsure about whether  
a replacement battery is compatible, contact  
customer support.  
• Promptly dispose of used batteries in  
accordance with local regulations and recycle  
if possible. Do not dispose as household waste.  
• Supervise all battery usage by children.  
• Avoid dropping the phone or battery. If the  
phone or battery is dropped, especially on a  
hard surface, an internal short-circuit can  
occur and pose a safety hazard. If you  
Purchasing accessories  
To purchase accessories for your new phone,  
such as a hands-free headset, carrying case, or  
car power adapter, please visit  
Finding your phone’s  
serial number  
To activate your Virgin Mobile account, you  
need your phone's serial number. To locate  
the number:  
1. Turn your phone off.  
2. Hold your phone face down.  
3. Unlock the back cover.  
suspect battery damage, take it to a service  
center for inspection.  
2
Purchasing accessories  
4. Locate the groove on the left side of the  
phone. Unsnap the hooks and remove the  
back cover.  
Programming your phone  
Once your account is activated, you need to  
program your Virgin Mobile phone number into  
your phone. When you are ready, follow these  
steps to program your phone:  
5. Remove the battery by pulling back on the top  
edge of the battery.  
6. Your phone's serial number is an 18-digit  
number located below the first barcode,  
next to the D.  
1. Turn on your phone. Program your phone  
using the external number keypad. DO NOT  
use the internal QWERTY keyboard.  
7. Write down the serial number.  
2. Dial ##VIRGIN# (that's #-#-8-4-7-4-4-6-#).  
Note: With your phone turned on, you can also  
select Menu > Settings > Phone info >  
Build info to find your phone’s ID number.  
3. You are now in the Programming menu.  
Scroll down to "Activate Phone" and hit "OK”.  
4. Your screen will say, "Do you want to activate  
your phone now ?" Select "Yes".  
Phone activation  
5. Your phone will connect to the network, and  
then the screen will say “Hi. Press Start to  
continue the activation process”. Scroll  
down to “Start” and hit “OK”.  
Activating your Virgin  
Mobile account  
Before you can start talking, messaging, or  
downloading, you need to activate service  
with Virgin Mobile. To activate your Virgin Mobile  
account, do one of the following with your  
phone's serial number.  
6. Your phone will say “We’re getting your  
phone number for you,” then your phone will  
display your new Virgin Mobile phone  
number. Write it down.  
7. Scroll down to “Finish” and hit “OK” to  
complete the activation process. Your phone  
will turn off and back on by itself.  
on Activate.  
• Call Virgin Mobile At Your Service at  
1-888-322-1122.  
It might take a couple of hours to set up the  
network. Once set up, your phone displays a text  
message informing that you can start talking. Also,  
it may take up to 4 hours for VirginXL, Voicemail,  
and Top-Up features to come online.  
User Guide  
3
Phone overview  
Getting to know your phone  
The phone has two keypads—the number keypad and the QWERTY keypad.  
Number keypad  
1. External screen.  
2. External Camera key activates picture mode.  
3. Volume key to raise or lower speaker volume.  
4. Navigation key scrolls through lists and text entry fields  
and accesses shortcuts from the main screen.  
5. Left option button accesses menus and functions.  
6. Speakerphone key activates the speakerphone and  
answers incoming calls.  
7. Send/Talk key starts or answers a call. Press once to  
activate voice command, twice to display the All Calls  
list, and three times to redial the last number dialed.  
Press and hold to access voice dial.  
8. External number keypad for entering numbers, letters,  
or symbols.  
9. * Shift key changes the text mode in text entry.  
10. Jack for AC adapter (included) and data cable (sold  
separately).  
4
Phone overview  
11. External speaker.  
12. Indicator light shows missed alert when in red or  
incoming call when in green.  
13. OK key selects a menu item or option.  
14. Right option button accesses the contacts list and other  
menu options.  
15. Back key erases characters in text entry and returns you  
to the previous screen.  
16. End/Power key turns the phone on and off, ends a call  
or browser session, and returns you to the main screen.  
17. # Space key enters a space during text entry. Press and  
hold to activate or deactivate Silent mode.  
18. Jack for hands-free headset only (sold separately).  
19. 0 Next key cycles through word choices during  
text entry.  
Warning: Inserting an accessory into the incorrect jack  
damages the phone.  
User Guide  
5
QWERTY keypad  
When the flip is open, use the QWERTY keypad to enter numbers, letters and symbols.  
1. Internal screen.  
2. Internal speaker.  
3. Navigation key scrolls through lists  
and text entry fields and accesses  
shortcuts from the main screen.  
4. Left option button accesses menus  
and functions.  
5. Send/Talk key starts or answers a  
call. Press once to activate voice  
command, twice to display the All  
Calls list, and three times to redial the  
last number dialed. Press and hold to  
access voice dial.  
6. Internal Camera key activates picture mode.  
7. Custom menu key accesses the custom menu.  
8. Symbol key allows you to type symbol characters.  
9. Shift key changes the text mode in text entry.  
10. Space key enters a space during text entry.  
11. OK key selects a menu item or option.  
12. Right option button accesses the contacts list and other menu options.  
13. End/Power key turns the phone on and off, ends a call or browser session, and returns you to the  
main screen.  
14. Speakerphone key activates the speakerphone and answers incoming calls.  
15. Back key erases characters in text entry and returns you to the previous screen.  
16. Enter key allows you to enter hard returns.  
6
Phone overview  
Back cover  
1. Accessory eyelet (for optional straps and lanyards).  
2. Camera flash and flash light.  
3. Camera lens.  
4. Back cover lock in unlocked status  
(If locked, the screw slot is in horizontal position).  
User Guide  
7
Common keys  
The following keys are pressed frequently when you use your phone. Throughout this user guide, these  
keys are referred as follows:  
Back key (number keypad)  
Navigation key  
Back key (QWERTY keypad)  
OK key  
Left option button (number keypad)  
Left option button (QWERTY keypad)  
Right option button (number keypad)  
Right option button (QWERTY keypad)  
Speakerphone key (number keypad)  
Speakerphone key (QWERTY keypad)  
Camera key (QWERTY keypad)  
Custom menu key (QWERTY keypad)  
Talk/Send key (number keypad)  
Talk/Send key (QWERTY keypad)  
End/Power key (number keypad)  
End/Power key (QWERTY keypad)  
Symbol key (QWERTY keypad)  
Shift key (QWERTY keypad)  
8
Phone overview  
Screen icons  
These icons may appear on your phone’s screen.  
New voice and text message.  
The phone is operating in IS95 digital mode.  
New photo message.  
The phone is receiving a signal. You can make  
and receive calls. Fewer bars indicate a  
weaker signal.  
New photo and voice message.  
New photo and text message.  
New photo, voice and text message.  
The phone is in vibrate mode.  
A call is in progress.  
The phone is not receiving a signal. You  
cannot make or receive calls.  
The file is DRM protected.  
Position location is set to your service  
provider and to emergency services.  
High-speed (3G) data service is available and  
active on your phone. Check Virgin Mobile’s  
availability.  
Position location is set to emergency  
services only.  
(blinking) The phone is sending high-speed  
data.  
The phone is in picture mode.  
Camera flash mode is ready.  
(blinking) The phone is receiving high-speed  
data.  
Speakerphone is on.  
Auto-answer is on.  
High-speed data service is available, but the  
phone is dormant.  
The battery is fully charged. The more black  
bars, the greater the charge.  
Bluetooth wireless technology is  
enabled (On).  
The alarm clock is set.  
Bluetooth wireless technology is  
disabled (Off).  
The phone is in privacy mode, is accessing a  
secure Web site or the selected file is locked.  
You have a text message.  
You have a voice message.  
User Guide  
9
Main menu  
The contents of the main menu are as follows:  
Messaging  
Send text msg  
Send pic msg  
Send email msg  
Send IM msg  
Inbox  
Virgin Alerts  
Outbox  
Saved  
VirginXL  
Launches VirginXL  
Pictures  
Tools  
Take a picture  
Send picture msg  
My pictures  
Help  
Settings  
Bluetooth  
Keyguard  
Sounds  
Voice memo  
Scheduler  
Alarm clock  
Tip calculator  
Calculator  
Timer  
My Account  
Launches My Account  
My stuff  
My ringtones  
My games  
My graphics  
My other stuff  
My sounds  
Stopwatch  
Flashlight  
Drafts  
Display  
Voicemail  
Erase msgs  
Msg settings  
Contacts  
View all  
Convenience  
Call options  
Messaging  
Camera  
IM  
Launches Mobile IM  
Recent calls  
All calls  
Security  
Incoming calls  
Outgoing calls  
Missed calls  
Add new  
Find name  
Groups  
Network  
Accessories  
Phone info  
Erase call lists  
Recent calls timer  
All calls timer  
Speed dial list  
Voice dial list  
Information  
Note: The menu items on your phone can change depending on the services provided. For more information,  
10  
Main menu  
Basic navigation  
Guide conventions  
You press your phone keys to access the various  
menus and other features of your phone. Some of  
the basic frequently used keys are as follows:  
In this guide the following conventions are used  
when describing phone features.  
Select means to press the left or right option  
button, or the OK key to select an item on the  
display. For example, “select Menu” tells you to  
press the left option button at the main screen to  
access the main menu.  
Left option button: Select items that appear  
on the lower left of the display. At the main  
screen, you can select Menu.  
Right option button: Select items that appear  
on the lower right of the display. At the main  
screen, you can select Contacts.  
Press means to press a phone key. For example,  
“press the Send key to make a phone call” tells  
you to press the Send key on your phone.  
Navigation key: Scroll through menus and  
options. You can access the following  
shortcuts from the main screen.  
Scroll means to press the Navigation key to move  
though a list on the display. For example, “scroll  
through your contacts list to choose a contact”  
means to press the Navigation key up or down to  
scroll through the list on the display.  
Scroll left to launch VirginXL.  
Scroll right to access Send text msg.  
Scroll up to access My Account.  
Scroll down to view Recent calls.  
The greater than symbol “>” tells you to select an  
option from a menu or list. For example, Menu >  
Settings means to:  
OK key: Select a menu item.  
Back key: Return to the previous menu level.  
End/Power key: Return to the main screen.  
1. Press the left option button at the main screen  
to select Menu.  
2. Scroll to the Settings option.  
3. Press the OK key to select Settings.  
User Guide  
11  
2
Basic functions  
This section explains the basic functionality of  
your phone. For more detailed explanation of  
your phone’s features please refer to the  
later chapters.  
Call using a contact  
At the main screen:  
1. Select Contacts to open your contacts list.  
2. Highlight a contact and press the Send key.  
Powering up  
To turn your phone on, press and hold the End  
key and wait until the phone display lights up.  
Call using voice commands  
You can use voice commands to call a contact  
from your voice dial list or to dial a phone  
number. For more information, see “Voice  
recognition” on page 63.  
To turn your phone off, press and hold the End  
key until the phone turns off.  
Redial a number  
At the main screen:  
Making phone calls  
Make sure you are in an area where a signal can  
be received. Look for the signal strength icon on  
the main screen. The more bars you see in this  
symbol, the stronger the signal. If there are no  
bars, move to where the signal strength is better.  
1. Press the Send key twice to open your  
call history.  
2. Highlight a phone number or contact and  
press the Send key.  
When the phone has been idle for a while with no  
signal, it changes to power save mode. When you  
see “Power Save” on your phone’s screen, press  
any key to return to normal operating mode. You  
can make a phone call in one of the  
Tip: To redial the last number called, received or  
missed, press the Send key three times.  
Answering phone calls  
When a call comes in, the phone rings, vibrates,  
or lights up. The phone number of the caller also  
appears if it is not restricted. If the number is  
stored in your contacts list, the contact  
name appears.  
following ways.  
Call using a number  
At the main screen:  
1. Enter a phone number.  
2. Press the Send key.  
You can answer a phone call in one of the  
following ways.  
12  
Powering up  
Answer using earpiece  
Press the Send key.  
Taking a picture  
At the main screen:  
1. Press and hold the Camera key to start  
Answer using speakerphone  
Press the Speakerphone key.  
the camera.  
2. Focus on the image and select Capture.  
Answer using flip  
For more information, see “Pictures” on page 43.  
You can set the phone to answer immediately  
when you open the flip. This feature does not  
apply to incoming data or fax calls.  
Using custom menu  
You can use the custom menu to quickly access  
your frequently used functions.  
See “Open to answer” on page 51.  
1. With the QWERTY keypad, press the Custom  
Ending phone calls  
menu key  
to access the custom menu.  
Press the End key.  
2. Select Edit.  
3. Scroll through the list of options and press  
OK to select your desired option(s). A check  
mark appears next to each selected option.  
(You can press OK again to remove  
check marks.)  
Verifying your phone number  
To verify your phone number, select Menu >  
Settings > Phone info > Build info.  
Activating voice dialing  
At the main screen:  
4. Select Save after checking all your desired  
option(s). Your selected options appear in  
the custom menu.  
1. Press the Send key once.  
2. Follow the prompts.  
5. Scroll through the list of your selected  
functions in the custom menu and press OK  
to access your desired one.  
For more information, see “Voice recognition” on  
page 63.  
User Guide  
13  
3
Call features  
This chapter describes call features such as  
volume, holding calls, speed dialing and  
other features.  
Hold calls  
The Hold call feature allows you to place  
incoming calls on hold until you are ready to  
answer them. See “Hold call” on page 52.  
Volume control  
You have several ways to control the volume of  
your phone.  
Speed dial  
Use the speed dial feature to assign a one- or two-  
digit shortcut to a contact. Before you can use  
speed dialing, you must save a phone number as a  
contact and assign a speed dial location to it. See  
“Contact number” on page 31.  
Adjust volume during a call  
To adjust the earpiece volume during a call, press  
the Volume key up or down.  
To call a contact that has a speed dial location.  
Use the speakerphone  
1. Enter the one- or two-digit speed dial  
Your phone has a built-in speakerphone. To turn  
on the speakerphone, press the Speakerphone  
key. The speakerphone icon appears on the main  
screen when the speakerphone is on. To turn off  
the speakerphone, press the Speakerphone key.  
location.  
2. Press the Send key.  
1-Touch dialing  
Note: If you press the Speakerphone key during  
an incoming call, you answer the call.  
The 1-touch dialing feature is the fastest way to  
speed dial a contact that has a speed dial location.  
See “1-Touch dialing” on page 52.  
Silence an incoming call  
To silence the phone without answering the call,  
press the End key or select Silence.  
Voicemail  
Configure your voicemail  
To silence the phone and answer the call, press  
Before your phone can receive voicemail  
messages, you must set up a 4-10 digit passcode  
and record a personal voicemail greeting.  
the End key and then press the Send key.  
Note: In the absence of voicemail, this feature  
drops the call.  
14  
Volume control  
When you have set up your voicemail, all  
unanswered calls to your phone are automatically  
transferred to voicemail, even if your phone is in  
use or turned off.  
Set voicemail alert  
You can set the phone to beep or vibrate every five  
minutes to remind you that you have voicemail.  
See “Other alerts” on page 49.  
1. Press and hold the 1 key.  
Emergency services  
2. Follow the system prompts to create a  
password and record a greeting.  
Call emergency service  
Check voicemail  
You can call an emergency code, even if your  
phone is locked or your account is restricted.  
When you call, your phone enters Emergency  
mode. This enables the emergency service  
exclusive access to your phone to call you back, if  
necessary. To make or receive regular calls after  
dialing the code, you must exit this mode.  
When a voice message is received, your screen  
displays “New Messages” along with the symbol at  
the top of your screen. The symbol flashes if  
the message is urgent. Standard airtime  
charges apply.  
If you see “New Messages”:  
To dial an emergency code:  
1. Enter your 3-digit emergency code.  
2. Press the Send key.  
1. Select Call, which initiates a call to your  
voicemail number.  
2. Follow the system prompts to retrieve  
the message.  
Note: Regardless of your 3-digit emergency code  
(911, 111, 999, 000, etc.), your phone operates  
as described.  
Note: To clear the screen without checking  
messages, select Ignore.  
If you see only the voicemail message icon:  
Exit emergency services  
When you have completed the emergency call:  
1. Select Exit.  
1. Select Menu > Messaging > Voicemail.  
2. If you have set up your voicemail, select Call,  
to call your voicemail number.  
2. Select Exit again to confirm your choice.  
3. Follow the system prompts to retrieve  
Note: To determine who has access to your  
location, see “Location” on page 56.  
the message.  
User Guide  
15  
4
Text entry  
You can enter letters, numbers, and symbols in  
contacts, text messages, and your banner with  
either QWERTY keypad (flip open) or the number  
keypad (flip closed).  
Note: The mode you start in depends on the task  
you are doing. For example, when entering a  
phone number, you are in Numbers and symbols  
mode. When entering a name for a contact, you  
are in Normal alpha mode.  
QWERTY keypad  
Enter numbers and symbols  
Text entry modes  
• To enter a number or symbol while in  
Numbers and symbols mode, press the  
appropriate key once.  
With the flip open, enter text with the QWERTY  
keypad. The current text entry mode (and  
capitalization setting, when applicable) are  
indicated by icons.  
• To enter a letter while in Numbers and symbols  
mode, press the Symbol key once, then press  
the appropriate key.  
The text entry screen has the following features:  
• To change to and from Numbers and symbols  
mode, press the Symbol key twice.  
1. The number of  
remaining characters  
you can enter. Allowed  
length of messages can  
vary depending on  
your service.  
Enter word letter by letter  
1. To enter text while in Normal alpha mode,  
press the appropriate key once.  
2. To enter a number or symbol while in Normal  
alpha mode, press the Symbol key once, then  
press the appropriate key.  
2. Text entry fields.  
3. Current capitalization setting.  
4. Current text entry mode.  
There are six text entry modes:  
3. To change to and from Normal alpha mode,  
press the Symbol key twice.  
Case change  
Numbers and symbols  
Normal alpha  
Rapid entry  
Add symbol  
Add smiley  
16  
QWERTY keypad  
Enter symbols  
Change modes  
While entering text, you can enter many symbols  
with the keypad. To access extra symbols:  
Sometimes you need to change modes. For  
example, to enter numbers in an email address  
while in Normal alpha mode, you must change to  
Numbers and symbols mode, enter the numbers,  
and then change back to Normal alpha mode to  
complete the address.  
1. From the text entry screen select Options >  
Add symbol.  
2. Scroll up or down to view the list of symbols.  
3. Press the number key corresponding to the  
To change text entry modes, press the Symbol key  
twice, until the icon for the mode you want  
appears at the top of the screen. You can also  
select Options and a different mode.  
symbol to enter it.  
Enter smileys  
1. From the text entry screen select Options >  
Add smiley.  
Capitalization  
2. Scroll up or down to view the list of smileys.  
You can change capitalization at any time while  
entering text. Press the Shift key while in Normal  
alpha mode.  
3. Press the number key corresponding to the  
smiley to enter it.  
Change default text entry mode  
You can change the default text entry mode when  
creating a text message. This setting applies only  
to the message body screen, not the “To” screen.  
Select Menu > Messaging > Msg settings >  
Text entry and one of the following:  
Normal alpha enter text in letter by letter.  
Rapid mode enter text with word recognition.  
User Guide  
17  
Text entry quick reference  
This table gives instructions for entering letters, numbers, and symbols.  
To...  
Do this...  
Enter a letter  
Use Normal alpha mode and press a key until you see the letter you want.  
For more options, see “Text entry modes” on page 19.  
Enter a number  
Enter a symbol  
Use Numbers only mode and press a key until you see the number you  
want. For more options, see “Text entry modes” on page 19.  
In either Normal alpha or Numbers only mode, press 1 until you find the  
symbol you want. For more options, see “Text entry modes” on page 19.  
Enter a smiley  
Use the Add smiley feature.  
Press the Space key.  
Enter a space  
Erase a character  
Press the Back key.  
Erase all characters  
Move cursor right or left  
Move cursor up or down  
Change text entry modes  
Capitalize any letter  
Press and hold the Back key.  
Scroll left or right.  
Scroll up or down.  
Press the Symbol key twice.  
In Normal alpha mode, press the Shift key to select uppercase if in  
lowercase or enter text if already in uppercase.  
Lowercase any letter  
In Normal alpha mode, enter text if already in lowercase or press the  
Shift key to select lowercase if in uppercase.  
Initial caps  
In Normal alpha mode, press the Shift key to select sentence case.  
Select soft options on screen  
Press the appropriate left or right option button.  
18  
QWERTY keypad  
Enter numbers  
Number keypad  
• To enter a number while in Numbers only  
mode, press a number key once.  
Text entry modes  
When the flip is closed, enter text with the number  
keypad. The current text entry mode (and  
capitalization setting, when applicable) are  
indicated by icons.  
• To enter a number while in Normal alpha or  
Rapid mode, press and hold a number key  
until the number appears on the screen.  
Enter words letter by letter  
The text entry screen has the following features:  
1. Press a key once for the first letter, twice for  
1. The number of  
remaining characters  
you can enter. Allowed  
length of messages can  
vary depending on your  
service.  
the second letter, and so on.  
2. Wait for the cursor to move right and enter  
the next letter.  
Note: To enter a space, press the # Space key.  
Enter words quickly  
2. Text entry fields.  
When you press a series of keys using Rapid  
mode, your phone checks its dictionary and  
guesses at the word you are trying to spell.  
3. Current capitalization setting.  
4. Current text entry mode.  
There are six text entry modes:  
1. For each letter of the word you want, press  
the key once. For example, to enter the word  
“any” press the 2 > 6 > 9 keys.  
Case change  
Numbers only  
2. If the word doesn’t match what you  
want, press the 0 Next key to check  
other word matches.  
Normal alpha  
Rapid entry  
Add symbol  
Add smiley  
3. When you see the word you want, press the  
# Space key.  
Note: The mode you start in depends on the task  
you are doing. For example, when entering a  
phone number, you’re in Numbers only mode.  
When entering a name for a contact, you’re in  
Normal alpha mode.  
User Guide  
19  
Enter symbols  
Change modes  
While entering text in normal text mode, you can  
enter symbols by pressing the 1 key until you see  
the symbol you want. Using this method, you have  
access to the following symbols:  
Sometimes you need to change modes. For  
example, to enter numbers in an email address  
while in Normal alpha mode, you must change to  
Numbers only mode, enter the numbers, and then  
change back to Normal alpha mode to complete  
the address.  
.
@
?
!
-
,
&
:
To access the full set of symbols:  
To change text entry modes, press and hold the *  
Shift key until the icon for the mode you want  
appears at the top of the screen. You can also  
select Options and a different mode.  
1. From the text entry screen select Options >  
Add symbol.  
2. Scroll up or down to view the list of symbols.  
3. Press the number key corresponding to the  
Capitalization  
symbol to enter it.  
You can change capitalization at any time while  
entering text. Simply press to choose upper or  
lower case while in Normal alpha mode.  
Enter smileys  
1. From the text entry screen select Options >  
Add smiley.  
2. Scroll up or down to view the list of smileys.  
3. Press the number key corresponding to the  
smiley to enter it.  
Change default text entry mode  
You can change the default text entry mode when  
creating a text message. This setting applies only  
to the message body screen, not the “To” screen.  
Select Menu > Messaging > Msg settings >  
Text entry and one of the following:  
Normal alpha to enter text in letter by letter.  
Rapid mode to enter text with word  
recognition.  
20  
Number keypad  
Text entry quick reference  
This table gives instructions for entering letters, numbers, and symbols  
To...  
Do this...  
Enter a letter  
Use Normal alpha mode and press a key until you see the letter you want.  
For more options, see “Text entry modes” on page 19.  
Enter a number  
Enter a symbol  
Use Numbers only mode and press a key until you see the number you  
want. For more options, see “Text entry modes” on page 19.  
In either Normal alpha or Numbers only mode, press 1 until you find the  
symbol you want. For more options, see “Text entry modes” on page 19.  
Enter a smiley  
Use the Add smiley feature.  
Enter a space  
Press the # Space key.  
Erase a character  
Press the Back key.  
Erase all characters  
Move cursor right or left  
Move cursor up or down  
Change text entry modes  
Capitalize any letter  
Lowercase any letter  
Initial caps  
Press and hold the Back key.  
Scroll left or right.  
Scroll up or down.  
Press and hold the * Shift key.  
In Normal alpha mode, press the * Shift key. Choose uppercase.  
In Normal alpha mode, press the * Shift key. Choose lowercase.  
In Normal alpha mode, press the * Shift key. Choose sentence case.  
Press the appropriate left or right option button.  
Select soft options on screen  
User Guide  
21  
5
Messaging  
This chapter describes how to send, receive,  
and erase messages from your phone. For  
information on voicemail messages, see  
“Voicemail” on page 14.  
You can message up to ten recipients at once.  
Use a comma or spaces to separate  
addresses. If you select stored contacts, this is  
done automatically. Scroll down to move to  
the next field when done.  
Note: The features and menus described in this  
chapter may vary depending on services available  
details and possible usage charges.  
Note: The messages are sent one at a time,  
once to each recipient. Standard text  
messaging charges apply for each recipient.  
3. At the Message field, enter the message.  
Text messages  
4. Select Send.  
You can send text messages to phones that are  
capable of receiving them or to email addresses.  
Text messages have a 160 character limitation  
including spaces. Charges apply for the use of these  
Include auto text and symbols  
During text entry, you can insert prewritten text  
(auto text), symbols or smileys.  
1. From the text entry screen, select Options  
and one of the following.  
Send a text message  
1. At the main screen, scroll right or select  
Insert auto text to insert prewritten text  
from a list.  
Menu > Messaging > Send text msg.  
Add symbol to insert symbols. Press the  
corresponding number to select a  
symbol.  
2. At the Send To field, do one of the following to  
enter the recipient’s phone number or  
email address:  
Add smiley to insert smileys. Press the  
corresponding number to select a smiley.  
Select Options > Recent list, Recent  
calls, Contacts or Groups to access your  
stored contacts.  
2. Complete your message.  
3. Select Send.  
Enter the phone number or email  
address manually. See “Text entry” on  
page 16.  
22  
Text messages  
Message notifications  
Use text message options  
If you see a message notification, select Inbox to  
view messages. Choose a message and select View  
to open it. To clear a message notification,  
select Ignore.  
When you are ready to send a text message, you  
have several options for how and when you want  
it received.  
1. After composing your message, select  
Options and one of the following:  
Message icons  
Add address returns you to Send To field  
to add another recipient.  
If you see the message icon, select Menu >  
Messaging > Inbox. Choose a message and  
select View to open it.  
Save message saves the messages in your  
Drafts folder. This prevents the message  
from being deleted if you activate  
Auto-erase.  
View a text message  
The options available when viewing a text message  
may vary. For more information, visit  
Save as auto text saves the message you  
composed as a prewritten message.  
2. After setting options, press the Back key to  
1. Select Menu > Messaging > Inbox.  
return to the message window.  
2. Select a message to view. If the message is  
3. Complete your message.  
long, scroll down to view the entire message.  
4. Select Send.  
3. Select Reply to create a response message or  
Options and one of the following:  
Retrieve a text message  
Erase erases the message.  
Lock msg protects the message from the  
accidentally deleted.  
When a text message is received, your phone  
displays a notification and the message icon  
appears at the top of your screen. The message  
icon flashes if the message is urgent. Urgent  
messages are also marked in the Inbox.  
Forward forwards the message.  
Reply with copy replies to the message  
with a copy of the original attached.  
Save message saves the message.  
User Guide  
23  
Save as auto text saves the message text  
as auto text, which you can insert into  
other messages. Graphics and sounds are  
not saved.  
Enter the phone number or email  
address manually. See “Text entry” on  
page 16.  
Note: You can message up to ten recipients  
at once. Use a comma or spaces to separate  
addresses. (If you select stored contacts, your  
phone does this automatically.)  
Sender displays the sender information.  
Note: If a graphic is too large or incorrectly  
formatted, and is not received with the message,  
an icon appears.  
4. At the Subject field, enter a subject. Scroll  
down to move to the next field when done.  
Picture messages  
5. At the Text field, enter a message. Scroll down  
You can send picture messages to phones that are  
capable of receiving them or to email addresses.  
Picture messages have a predetermined character  
and file size limit. Charges apply for the use of  
for pricing.  
to move to the next field when done.  
6. At the Image field, you can attach or reattach  
an image file. Select Options and one of  
the following:  
Take a picture to instantly take a photo  
and attach it.  
My graphics to attach an existing file  
from your My pictures or other  
image folders.  
Send a picture message  
1. Select Menu > Messaging >  
Send pic msg.  
Scroll down to move to the next field  
when done.  
2. With any picture stored in My pictures,  
select your desired image to attach to  
the message.  
7. At the Sound field, select Options and one of  
the following to attach a file:  
3. At the To, CC (to send a copy of the message),  
and BCC (to send a blind copy) fields, do one  
of the following to enter the recipient’s phone  
number or email address. Scroll down to  
move to the next field when done.  
Record sound to instantly record a  
sound and attach it.  
My sounds to attach an existing file  
from your Saved sounds or  
Voice memos folders.  
Select Options > Recent List, Recent  
calls, Contacts, or Groups to access  
your stored contacts.  
8. Select Send.  
24  
Picture messages  
Retrieve Later sends the message to the Inbox  
for you to download and view later.  
Use picture message options  
When you are ready to send a picture message,  
you have several options for how and when you  
want it to be received.  
Note: If a picture message is received during a  
call, the phone displays a notification after the  
call ends.  
1. While composing your message, select  
Options and one of the following:  
View a picture message  
Auto text adds prewritten text to  
your message.  
With a picture message received, the message  
icon appears at the top of your screen. The  
message icon flashes if the message is urgent. All  
notifications or messages are stored in the Inbox.  
Save as auto text saves your message as  
prewritten text.  
Preview message plays your message.  
Save message saves the message to the  
draft folder.  
1. Select Menu > Messaging > Inbox.  
2. Select a message to view. If the message is  
long, scroll down to view the entire message.  
Add address adds additional recipients  
to your message.  
3. Select Reply to create a response message or  
Options and one of the following:  
2. After setting options, press the Back key to  
The options available to you may vary.  
more information.  
return to the message window if necessary.  
3. Complete your message.  
4. Select Send.  
Reply all creates a response message to  
all recipients.  
Receive a picture message  
Forward forwards the message without  
showing the original address, graphic,  
sound, and text fields.  
When receiving a picture message, your phone does  
not automatically download it. A notification appears  
when a new message is available for download.  
Charges apply for the use of these features, see  
Erase deletes the message.  
Message info displays the message  
information (priority, sender, subject,  
time sent and received, and  
Select one of the following:  
Yes downloads and opens the message.  
Erase deletes the message.  
message size).  
Recipients displays all the addressees  
present in the "To" and "CC" fields.  
User Guide  
25  
Replay plays the message again from  
the beginning.  
Mute silences the message.  
Sender displays the sender information.  
Call calls the message sender.  
Save picture saves the picture embedded  
in the message.  
Save sound saves the sound embedded  
in the message.  
Save address extracts email addresses,  
phone numbers, and/or URLs from the  
sender information and message body.  
Save as auto text saves the text in the  
message to the auto text list.  
Save message saves the message to the  
Saved Folder.  
Launch Browser accesses a Web site.  
Instant messages  
You can send and receive instant messages (IMs)  
from your phone. Check Virgin Mobile’s Web site  
and pricing.  
Sending IM message  
Select Menu > Messaging > Send IM msg to  
access IM and send an instant message.  
Accessing Mobile IM  
To launch IM, select Menu > IM or Menu >  
My stuff > My other stuff > Mobile IM.  
Navigating IM  
• Scroll through items and to highlight one.  
Press the OK key to select an IM menu item  
or option.  
• Press the Back key to go back one screen.  
Email messages  
Note: A scroll bar on the right side of the screen  
indicates that there is more text. Scroll down to go  
to the next screen of text. Press the Back key to  
move back one screen.  
You can send and receive email messages from  
your phone. Check Virgin Mobile’s Web site at  
and pricing.  
Ending IM session  
Press the End key from any IM page.  
Sending email message  
Select Menu > Messaging > Send email msg to  
send an email message.  
Erasing messages  
Accessing Mobile Email  
To launch mobile email, select Menu >  
It is a good idea to erase old messages to free up  
memory in your phone. You can erase messages  
My stuff > My other stuff > Mobile Email.  
26  
Email messages  
and pages as you send or read them, erasing them  
one at a time, or erasing them all at once.  
Receive incoming calls while  
creating messages  
If you receive a call while creating a message,  
a notification appears. You can do one of  
the following:  
Erase a single message  
1. Select Menu > Messaging > Inbox,  
Virgin Alerts, Outbox, Saved, or Drafts.  
• Select Ignore to return to the message  
creation screen without answering the call.  
2. Highlight the message you want to erase.  
3. Select Erase or Options > Erase depending  
• Press the Call key to answer the call and save  
the created message to the Drafts folder.  
on your selected folder.  
4. At the notification, select Yes to erase  
the message.  
Complete messages in Drafts folder  
To continue composing a message in the  
Drafts folder:  
Erase all messages  
Select Menu > Messaging > Erase msgs >  
Inbox, Outbox, Saved folder, Drafts folder or  
All messages > Yes.  
1. Select Menu > Messaging > Drafts.  
2. Highlight the message you want to complete.  
3. Select Edit.  
Note: To erase messages from all folders,  
4. Complete your message.  
5. Select Send.  
select All messages.  
Working with messages  
The following are some messaging tips.  
View sent messages in Outbox folder  
To view your sent messages, you must first save  
them in the Outbox folder.  
Unable to send messages  
You may not be able to send or receive messages  
if your phone’s memory is nearly full, or if digital  
service is not available at the time. To free up  
memory, erase old messages. See “Erasing  
messages” on page 26.  
1. Select Menu > Messaging > Msg settings >  
Save to outbox.  
2. Select one of the following:  
Disabled does not save  
outgoing messages.  
Prompt allows you to choose whether to  
save the message when sending it.  
User Guide  
27  
Enabled automatically saves successfully  
sent messages in the Outbox folder.  
Message settings  
Message settings help configure your phones text  
After saving the successfully sent messages, select  
Menu > Messaging > Outbox to view them.  
Scroll through the list of messages. One of  
the following indicators appears next to  
each message:  
and picture message settings.  
Alerts  
Choose how you want to be alerted of voicemail,  
pages, or text messages. Select Menu >  
Messaging > Msg settings > Alerts > Msg alert,  
Page alert, or Voicemail alert and select a  
ringtone from the list. (Scroll through the list to  
hear the different ringtones.)  
The scheduled message was sent and  
delivered as scheduled. You cannot cancel  
delivery of the message.  
The message has been received.  
You can also select Menu > Messaging >  
Msg settings > Alerts > Reminder > On to set  
the phone to notify you with the selected ringtone  
every five minutes until you address the alert.  
The message has never been sent or has not  
been sent since it was last modified. You can  
cancel delivery of the message  
The message has been sent to more than one  
recipient.  
Auto text  
Your phone comes with prewritten (auto text)  
messages, such as “Please call me,” which you  
can insert into the body of a text message. You can  
edit these messages or create new ones. Your  
phone stores up to 30 auto text messages, with up  
to 100 characters per message.  
View failed or pending messages  
Failed or pending messages are stored in your  
Outbox folder. To view messages in the Outbox  
folder, select Menu > Messaging > Outbox.  
Your list of failed or pending messages will  
appear with the following symbols.  
1. Select Menu > Messaging > Msg settings >  
Auto text and one of the following:  
The message is pending and will be sent when  
possible. You can cancel delivery of the  
message.  
Highlight an auto text message and  
select Edit.  
Select New msg to create a new auto  
text message.  
The message cannot be sent because service is  
not available. An alert appears on your phone  
if the message cannot be sent.  
2. Enter or edit the text.  
3. Select Done.  
28  
Message settings  
Note: You can also save a message you have  
written or received as auto text.  
Save to outbox  
You can save your outgoing messages. Select  
Menu > Messaging > Msg settings >  
Save to outbox and one of the following:  
Text entry  
You can change the default text entry mode when  
creating a text message. This setting applies only  
to the message body screen, not the “To” screen.  
Disabled does not save outgoing messages.  
Prompt allows you to choose whether to save  
your message when you send it.  
Select Menu > Messaging > Msg settings >  
Text entry and one of the following:  
Enabled saves all outgoing messages to the  
Outbox folder.  
Normal alpha to enter text in letter by letter.  
Rapid mode to enter text with  
word recognition.  
Auto-erase  
You can set your phone to erase messages  
automatically when memory is needed for  
incoming messages.  
Signature  
The signature you create is included at the end of  
all outgoing messages and is counted as  
characters in your messages; however, it does not  
appear in the message creation screen.  
Select Menu > Messaging > Msg settings >  
Auto-erase and one of the following:  
Disabled erases no messages.  
Inbox msgs erases old messages in your  
Inbox when memory is needed.  
1. Select Menu > Messaging > Msg settings >  
Signature.  
Outbox msgs erases old messages in your  
Outbox folder when memory is needed.  
2. Enter your signature in the text field.  
3. Select OK to save the signature.  
Both erases old messages in both your Inbox  
and Outbox folders when memory is needed.  
Note: The characters in the signature are  
included in the total character count of  
the message.  
User Guide  
29  
6
Contacts  
Use your phone’s contacts list to store information  
about a person or company. Each contact entry  
can have up to six phone numbers, two email  
addresses, two Web addresses, two street  
addresses, and a space for notes.  
Adding contacts  
Add contact from main screen  
To add a contact to your contacts list:  
1. From the main screen, enter a phone number  
to save (including the area code).  
Viewing contacts list  
2. Select Save > Save new contact.  
To view existing contacts in your phone, open the  
flip and select Menu > Contacts > View all. Your  
contacts list is displayed alphabetically.  
3. Enter a name for the contact. For more  
information, see “Text entry” on page 16.  
4. Enter additional phone numbers, email  
addresses, Web addresses and note, if  
needed. Scroll up or down to move through  
the contact fields.  
Tip: You can also select Contacts from the main  
screen to view the directory.  
Scroll to highlight the contact you want and do  
one of the following:  
Press the Send key to call the  
highlighted contact.  
5. When you are done entering information,  
select Save.  
Press the OK key to view the highlighted  
contact’s detail.  
Select New to add a new contact.  
Select Options to choose one of the following:  
Add contact from contacts menu  
To add a contact to your contacts list:  
1. Select Menu > Contacts > Add new.  
2. Enter a name for the contact. When you are  
done, scroll down to move to the next field.  
For more information, see “Text entry” on  
page 16.  
Call to make a call.  
Send text msg to send a text message.  
Send picture msg to send a  
picture message.  
3. Enter a primary number for the contact.  
View contact to view contact details.  
Edit contact to edit contact details.  
Erase contact to erase the contact.  
Contacts menu to access your contacts.  
4. Enter additional phone numbers, email  
addresses, IM addresses, Web addresses,  
Street addresses, and note. Scroll up or down  
to move through the contact fields.  
30  
Viewing contacts list  
5. When you are done entering information,  
4. Edit or add phone numbers, email addresses,  
IM addresses, Web addresses, Street  
select Save.  
addresses, and notes. Scroll up or down to  
move through the contact fields.  
Add code or extension  
When you save the phone number of an  
automated service, you may include a pause to  
stop dialing. For example, a pause where you  
would wait to dial an extension.  
5. When you are done entering information,  
select Save.  
Contact name  
1. From the main screen, enter a  
To work on the name of an existing contact:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
phone number.  
2. Select Options and a type of pause:  
Time pause causes the phone to stop  
dialing for two seconds.  
3. At the contact’s detail screen, highlight  
the name.  
Hard pause causes the phone to stop  
dialing until you select Release while  
making the call.  
4. Select Options and one of the following:  
Ringer assigns a specific ringtone to  
the contact.  
Msg alert assigns a message alert  
ringtone to the contact.  
Picture assigns a specific picture to  
the contact.  
Erase contact erases the entire contact.  
3. Enter the remaining numbers and  
select Save.  
4. Select Save new contact.  
5. Complete the contact and select Save.  
Working with contacts  
Contact number  
Contact details  
To work on the number of an existing contact:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
To edit details of an existing contact:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
3. At the contact’s detail screen, select Edit.  
3. At the contact’s detail screen, highlight a  
contact number.  
User Guide  
31  
4. Select Options and one of the following:  
Contact email address  
Call sends a call.  
To access the email address of an existing contact:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
Send text msg sends a text message.  
Send picture msg sends a picture  
message.  
Add speed dial adds the number to your  
speed dial list.  
View number displays the number.  
Erase number erases the number from  
the contact.  
Secret makes the number secret, hiding  
it from the screen until you enter the lock  
code. Secret numbers can be called  
without a lock code. For more  
information, see “Lock phone” on  
page 55.  
Primary number makes this number the  
primary number for the contact.  
Add to Group adds the number to the  
business, personal or custom group.  
Add voice dial records a voice tag so  
you can call a contact using  
3. At the contact’s detail screen, highlight a  
contact email address.  
4. Select Options and one of the following:  
Send Email launches the  
email application.  
Send text msg sends a text message.  
Send picture msg sends a  
picture message.  
View address displays the email address.  
Add to Group adds the email address to  
the business, personal or custom group.  
Erase address erases the email address  
from the contact.  
Secret makes the address secret, hiding  
it from the screen until you enter the  
lock code.  
Contact IM address  
voice recognition.  
To access the IM address of an existing contact:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
Erase voice dial erases the voice tag  
associated with the number.  
Edit voice dial re-records the voice tag.  
Prepend displays the contact’s detail  
screen for you to change the number  
(adding an area code) or other data of  
the contact.  
3. At the contact’s detail screen, highlight a  
contact IM address.  
32  
Working with contacts  
4. Select Options and one of the following:  
4. Select Options and one of the following:  
View IM displays the IM address.  
Erase IM erases the IM address from  
the contact.  
View address displays the street address.  
Erase address erases the street address  
from the contact.  
Send IM launches the IM application.  
Secret makes the address secret, hiding  
it from the screen until you enter the  
lock code.  
Contact Web address  
To access the Web address of an existing contact:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
Contact note  
To work on the note of an existing contact:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
3. At the contact’s detail screen, highlight a note.  
4. Select Options and one of the following:  
3. At the contact’s detail screen, highlight a  
contact Web address.  
4. Select Options and one of the following:  
Launch web to go to the Web address.  
View web to view the Web address.  
Erase web to erase the Web address  
from the contact.  
View note displays the note.  
Erase note erases the note from  
the contact.  
Secret makes the note secret, hiding it  
from the screen until you enter the  
lock code.  
Secret makes the address secret, hiding  
it from the screen until you enter the  
lock code.  
Assign ringtone to contacts  
To assign a ringtone:  
Contact street address  
To access the street address of an existing contact:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
3. At the contact’s detail screen, highlight the  
3. At the contact’s detail screen, highlight a  
contact name.  
contact street address.  
4. Select Options > Ringer > Assign ringer.  
User Guide  
33  
5. Select a ringtone from the list. (Scroll  
through the list to hear the different  
ringtones.)  
Assign number type  
When you assign a number type, an icon is placed  
in front of the contact number to specify the type  
of number it is.  
Assign message alert to contacts  
To assign a message alert ringtone:  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
3. At the contact’s detail screen, select Edit.  
4. Scroll down twice to highlight the number  
type dropdown and press the OK key.  
5. Select General, Work, Home, Mobile, Pager  
or Fax. The appropriate icon appears next to  
the number in your phone lists.  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
3. At the contact’s detail screen, highlight the  
contact name.  
4. Select Options > Msg alert > Assign alert.  
5. Select a ringtone from the list. (Scroll  
through the list to hear the different  
ringtones.)  
6. Select Save.  
Using contact groups  
Assign picture to contacts  
To assign a picture:  
You can assign your contacts to groups that share  
the common ringtone or image. Your phone  
comes with two default groups, Business and  
Personal. You can also create your own groups.  
1. Select Menu > Contacts > View all.  
2. From the contacts list, select a contact.  
3. At the contact’s detail screen, highlight the  
Create groups  
1. Select Menu > Contacts > Groups.  
2. Select New.  
3. Enter a name for the group and select Next.  
4. Add or remove your desired contacts from  
the list. A check mark appears next to  
each selection.  
contact name.  
4. Select Options > Picture > Assign picture.  
5. Scroll through the folders to select one where  
to get your pictures.  
6. Scroll through to select a picture to assign.  
Note: With Mobile Phone Tools (MPT) for  
Kyocera, you can transfer digital pictures to your  
phone. To purchase MPT or other accessories  
5. After selecting all your desired contacts,  
select Done.  
Your new group appears the next time you view  
your groups.  
34  
Using contact groups  
Use a group  
1. Select Menu > Contacts > Groups.  
Searching contacts  
To find a phone number or contact, you can  
search the contacts list, use the Fast find, or  
check the Frequent list. See “Fast find” on  
page 51 and “Frequent list” on page 51.  
2. Scroll to your desired group in the  
Groups list.  
3. Select Options and one of the following:  
To search your contacts list, select Menu >  
Contacts > View all, Find name, Groups,  
Speed dial list or Voice dial list.  
View displays the group details.  
Edit edits the group.  
Erase deletes the group.  
Send text msg sends the group a  
text message.  
You can also use the Contacts shortcut from the  
main screen to view the contacts list. To quickly  
get down the list, enter the first letter of the  
contact. You skip to that letter of the alphabet.  
Send picture msg sends the group a  
multimedia message.  
Customize a group  
1. Select Menu > Contacts > Groups.  
2. Select a group from the Groups list.  
3. Select Options and one of the following:  
Ringer assigns a ringer to the group.  
Msg alert assigns a message alert  
ringtone to the group.  
Picture assigns a picture to the group.  
Erase deletes the group.  
Edit edits the group.  
Note: Since Business and Personal are  
predefined groups, you cannot erase any of them.  
User Guide  
35  
7
VirginXL  
Accessing VirginXL  
With VirginXL, you can access music,  
entertainment, and information services from  
your phone. Download games, ringtones,  
wallpapers, screen savers, and other content; surf  
the web; and more. Check Virgin Mobile’s Web  
and pricing, or check directly from your phone  
using VirginXL. Charges apply.  
To launch VirginXL, from the main screen, scroll  
left or select Menu > VirginXL.  
Note: You cannot receive incoming calls during a  
VirginXL session. All incoming calls are  
automatically sent to your voicemail.  
Navigating VirginXL  
• Scroll through items and to highlight one.  
• Press the OK key to select a VirginXL menu  
item or option.  
• Press the Back key to go back one screen.  
Note: A scroll bar on the right side of the screen  
indicates that there is more text. Scroll down to go  
to the next screen of text. Press the Back key to  
move back one screen.  
Ending a VirginXL session  
Press the End key from any VirginXL page.  
36  
Accessing VirginXL  
8
My Account  
You can manage your Virgin Mobile account  
directly from your phone. The basic tasks are  
summarized in this chapter. For more information  
about your account, go to  
Note: Additional charges may apply for multiple  
balance checks in one day. Visit  
Top-Up with a Top-Up Card  
1. From the main screen, select Menu >  
My Account.  
Checking your account balance  
2. Scroll down to the Top-Up link and press the  
You can check your Virgin Mobile account status  
OK key.  
in one of two ways:  
3. Enter your Account Pin (vKey) and press the  
• From the main screen, scroll up.  
OK key to login.  
• Select Menu > My Account.  
4. Scroll down to select Login and press the  
Your account information appears with Top-Up  
information relative to your selected plan. When  
your account is low or empty, you receive a  
notification to Top-Up.  
OK key.  
5. Enter your Top-Up card's PIN number and  
press the OK key.  
6. Scroll down to select Top-Up Now and press  
Top-Up your account  
the OK key.  
Top-Up is how you add money to your Virgin  
Mobile account. You can Top-Up your Virgin  
Mobile account right from your phone. First, buy  
a Top-Up card at the thousands of retailers that  
carry them or register your debit card, credit  
card, or PayPal account at  
7. You are now topped up. Press the End key to  
exit.  
When your balance is low, you can Top-Up your  
account from your phone.  
User Guide  
37  
Top-Up with a debit card, credit card,  
or PayPal account  
Before you can Top-Up from your phone with a  
debit card, credit card, or PayPal account, you  
need to register the card or PayPal account at  
For more information  
For more information about your Virgin Mobile  
account or Virgin Mobile service, visit  
1. From the main screen, select Menu >  
My Account.  
2. Scroll down to the Top-Up link and press the  
OK key.  
3. Enter your Account Pin (vKey) and press the  
OK key.  
4. Scroll down to select Login and press the  
OK key.  
5. Scroll down and select Credit Card or  
PayPal.  
6. Enter the amount you want to Top-Up and  
press the OK key. You can Top-Up in  
amounts of $20, $30, $50, or $90.  
7. Scroll down to select Top-Up Now and press  
the OK key.  
8. At the confirmation screen, select Yes.  
9. You are now topped up. Press the End key to  
exit.  
Note: You can also Top-Up over the Web at  
38  
For more information  
9
My stuff  
Note: The downloaded ringtone is also listed in  
the Ringtones folder and available to assign to  
individual contacts or as the Personal or Business  
ringer. See “Add contact from main screen” on  
page 30 and “Assign message alert to contacts”  
on page 34.  
My ringtones  
The My ringtones folder stores your preloaded  
and downloaded ringtones. You can download  
ringtones to your phone from the Virgin Mobile  
from your phone using VirginXL. Select Menu >  
My stuff > My ringtones > Get more ringtones.  
Charges apply.  
My games  
You can download games to your phone from  
Downloading ringtones  
the Virgin Mobile Web site at  
phone using VirginXL. Select Menu > My stuff >  
My games > Get more games. Charges apply.  
Before downloading, make sure you have enough  
money in your account; otherwise you can Top-Up  
your account.  
Note: If you don’t have enough money in your  
account, you need to Top-Up before downloading.  
1. At the main screen, scroll left to launch  
VirginXL and then search for ringtones.  
1. At the main screen, scroll left to launch  
2. Follow the prompts to purchase and  
VirginXL and then search for games.  
download the selected ringtone.  
2. Follow the prompts to purchase and  
The downloaded ringtones are stored in the  
Menu > My stuff > My ringtones folder in  
your phone.  
download the selected games.  
The downloaded games are stored in the Menu >  
My stuff > My games folder in your phone.  
Assigning downloaded ringtones  
1. Select Menu > My stuff > My ringtones.  
2. Select a downloaded ringtone and Set as....  
User Guide  
39  
My graphics  
My other stuff  
You can download other stuff to your phone from  
the Virgin Mobile Web site at  
phone using VirginXL. Select Menu > My stuff >  
My other stuff > Get more stuff. Charges apply.  
You can download wallpapers and screensavers to  
your phone from the Virgin Mobile Web site at  
phone using VirginXL. Select Menu > My stuff >  
My graphics > Get more graphics. Charges apply.  
Note: If you don’t have enough money in your  
Note: If you don’t have enough money in your  
account, you need to Top-Up before downloading.  
account, you need to Top-Up before downloading.  
1. At the main screen, scroll left to launch  
1. At the main screen, scroll left to launch  
VirginXL and then search for graphics.  
VirginXL and then search for applications.  
2. Follow the prompts to purchase and  
2. Follow the prompts to purchase and  
download the selected graphic.  
download the selected application.  
The downloaded graphics are stored in the  
Menu > My stuff > My graphics folder in  
your phone.  
The downloaded applications are stored in the  
Menu > My stuff > My other stuff folder in  
your phone.  
Note: You can assign downloaded graphics as  
either screensavers or wallpapers.  
My sounds  
You can record and save voice memos and all  
received, attached sound files to My sounds. To  
listen to saved sounds or recorded voice memos:  
To assign downloaded graphics:  
1. At the main screen, select Menu > My stuff >  
My graphics.  
1. At the main screen, select Menu > My stuff >  
2. Select My pictures, VirginXL graphics,  
Wallpapers, Screensavers or Caller IDs,  
and then OK.  
My sounds.  
2. Select Saved sounds or Voice memos and  
then OK.  
3. Scroll to the graphic you want to assign and  
3. Highlight a sound and select Options.  
select Options.  
4. Highlight Record new, Erase, Lock/Unlock,  
Rename, Details, or Erase all and press the  
OK key.  
4. Select Assign or Set default, and press the  
OK key.  
40  
My graphics  
10 Recent calls  
Send picture msg sends a picture  
message to the number.  
Erase record deletes the call from the  
call list.  
Call lists  
Details on the last 60 calls you made, received, or  
missed are stored in the Recent Calls list and are  
identified by the following icons:  
Note: If the phone number is classified as  
“secret,” you must enter your four-digit lock code  
to access it.  
Outgoing call  
Incoming call  
Missed calls  
Missed call (flashing)  
When you have missed a call, “Missed Call”  
appears on your screen unless the caller leaves a  
voicemail. You can do one of the following:  
View recent calls  
1. Select Menu > Recent calls and one of  
• To clear the screen, select OK.  
• To view the call details, select Calls and press  
the following:  
the OK key.  
All calls displays all calls made  
or received.  
• To return the call, select Calls and press the  
Send key.  
Incoming calls displays calls answered.  
Outgoing calls displays calls made.  
Missed calls displays calls received, but  
not answered.  
Set alert for missed calls  
You can set an alert to beep every five minutes  
after you have missed a call. Select Menu >  
Settings > Sounds > Alerts > Missed call alert  
and select a ringtone from the list. (Scroll through  
the list to hear the different ringtones.)  
2. Highlight a recent call.  
3. Press the Send key to call the number or  
select Options and one of the following:  
Save creates a new contact or View  
displays the contact’s detail screen.  
Send text msg sends a text message to  
the number.  
User Guide  
41  
Erase call lists  
You can erase your phone’s call lists.  
1. Select Menu > Recent calls >  
Erase call lists > All calls, Incoming calls,  
Outgoing calls, or Missed calls.  
2. Select Yes.  
Call timers  
You can track the number and duration of calls  
made and received on your phone. Select Menu >  
Recent calls and one of the following:  
Recent calls timer tracks all calls you have  
made and received since you last reset this  
timer. To reset this timer to zero, select Reset.  
All calls timer tracks all calls you have made  
and received. You cannot reset this timer.  
42  
Call timers  
11 Pictures  
The following are some tips for you to operate  
your phone’s camera:  
Select Capture.  
4. The picture is saved to the  
• You cannot activate the camera while on an  
active call or while browsing files in the  
media gallery.  
My pictures folder.  
5. Select Send to create a picture message or  
Erase to delete the picture from your phone.  
• Once the camera is active, the main screen acts  
as the viewfinder.  
6. Press the End key to exit picture mode.  
• If you get a “Low memory” error, check your  
resolution and quality compression settings.  
Picture mode options  
You can set up how your camera takes pictures.  
While in picture mode, select Options and one of  
the following:  
Settings displays the following camera settings  
you may set up prior to taking a picture:  
• If there is no activity within 45 seconds after  
you turn your camera on, the camera quits and  
returns to the previous launch point.  
• Menu settings and options can only be  
accessed when the camera is active.  
Flash sets the camera flash as Automatic,  
On, or Off.  
Resolution sets the horizontal and vertical  
number of pixels for the picture.  
Low light mode brightens the picture for  
low light environments.  
Self timer sets up a countdown timer to  
automatically take a picture when the  
timer expires. When set, the camera beeps  
from 3 seconds down to the time the  
shutter automatically snaps the picture  
(unavailable for Multishot mode).  
Taking a picture  
To take a picture:  
1. Activate the camera in one of the  
following ways:  
Press the Camera key until the camera  
screen appears.  
Select Menu > Pictures >  
Take a picture.  
2. Focus on the image using the phone’s display  
as a viewfinder.  
3. Take a picture in one of the following ways:  
Press the OK key.  
Press the Camera key.  
User Guide  
43  
Multishot takes up to six multiple pictures  
with the Camera key pressed and held.  
A tone plays each time a picture is taken.  
A second tone plays when the final picture  
is taken.  
Shutter sound sets the sound used when  
the camera takes a picture.  
White balance adjusts the camera for  
different lighting.  
Frames adds a frame or a stamp to your  
picture. A frame or stamp cannot be removed  
once it has been used in a picture. The picture  
resolution changes to 120 x 160 (with the  
number keypad) or 160x120 (with the  
QWERTY keypad) while taking pictures with  
Frames enabled. The resolution returns to the  
original setting with Frames disabled.  
Note: The following settings revert to the default  
setting each time you enter and exit the camera  
application: Low light mode, Self timer,  
Multishot, and Viewfinder display.  
Color tone sets the color tone of  
the picture.  
Picture quality sets the picture  
compression. The higher the  
compression, the better the detail of the  
picture (higher pixel rate). When set to  
High, the picture file size is larger, using  
more memory.  
Picture mode indicators  
and icons  
The camera may display the following on screen  
indicators and icons.  
LED flashes the indicator light when taking  
a picture.  
Viewfinder display sets the camera  
viewfinder as Fullscreen or Actual.  
Note: Numbers in the top right corner indicate  
the number of snapshot remaining. Numbers in  
the bottom left corner indicate the resolution  
setting for pictures.  
Brightness adjusts the brightness of the image  
in the main screen LCD.  
My pictures displays all pictures taken  
and stored.  
Flash is on.  
Camera is in picture mode.  
Multishot feature is on.  
Self-timer feature is on  
Last picture displays the most recently  
taken picture.  
44  
Picture mode indicators and icons  
12 Settings  
Menu options  
The contents of the Settings menu are as follows:  
Bluetooth  
On/Off  
My devices  
Settings  
Keyguard  
Guard on close  
Disabled  
Sounds  
Ringtone volume  
Display  
Greeting banner  
Menu style  
Wallpapers  
Screensavers  
Backlight  
Auto-hyphen  
Time/Date format  
Brightness  
Call options  
Add voice dial  
Erase voice dial  
Voice training  
Voice wake-up  
Voice answer  
Expert mode  
Auto-answer  
Messaging  
Alerts  
Auto text  
Text entry  
Signature  
Save to outbox  
Auto-erase  
Security  
Lock phone  
Change lock code  
Emergency numbers  
Erase contacts  
Network  
Privacy alert  
Location  
Accessories  
Headset sound  
Auto-answer  
Pwr backlighting  
TTY device  
Convenience  
Open to answer  
Fast find  
Frequent list  
Hold call  
1-Touch dialing  
Any key  
Ringtones  
Business ringtones  
Personal ringtones  
Flip closed  
Flip open  
Pwr on/off sound  
Key volume  
Key length  
Alerts  
Smart volume  
Minute alert  
Earpiece volume  
Spkrphone volume  
Hearing aid  
Phone info  
Build info  
Icon keys  
Camera  
Resolution  
Picture quality  
Shutter sound  
Viewfinder display  
User Guide  
45  
Pairing  
Bluetooth  
The Bluetooth® wireless technology on your  
phone enables wireless connectivity with  
headsets. You must use a Bluetooth wireless  
technology device (compatible with Class 2  
Bluetooth wireless technology, version 1.2) in  
order to use this phone wirelessly. Bluetooth  
wireless technology accessories have the  
symbol. For additional information on carrier-  
supported profiles and third-party accessory  
compatibility for Bluetooth wireless technology,  
You must first “pair” your phone with the  
Bluetooth wireless technology enabled headset to  
allow your phone to communicate with it. Refer to  
the following instructions for setting up Bluetooth  
wireless technology in conjunction with the user  
guide provided with your Bluetooth wireless  
technology headset.  
1. Select Menu > Settings > Bluetooth >  
On/Off > On Visible or On Invisible.  
2. Prepare the Bluetooth wireless technology  
headset (Bluetooth accessory) for pairing as  
described in the other headset’s user guide.  
Turning Bluetooth on  
3. Select Menu > Settings > Bluetooth >  
My devices > Find new. Your phone then  
searches and detects visible Bluetooth  
wireless technology enabled headsets in  
the vicinity.  
You must turn on your phone’s Bluetooth feature  
to use it with Bluetooth wireless technology  
headsets. Select Menu > Settings > Bluetooth >  
On/Off and one of the following:  
On Visible allows other headsets to find  
your phone.  
4. With headsets found, select Add to see  
the list.  
On Invisible hides your phone for all headsets  
except those listed in your My devices.  
5. Highlight your desired headset and  
select Add.  
Off prohibits your phone from being used with  
any Bluetooth wireless technology headset. To  
prolong battery life, it is recommended to set  
Bluetooth to Off when you are not using it.  
Note: When pairing is initiated from another  
Bluetooth wireless technology headset, you  
are prompted to accept or reject the pairing.  
6. If necessary, enter the password provided in  
the Bluetooth wireless technology headset’s  
user guide and select OK.  
When you turn Bluetooth On the first time, you  
are prompted to do a device search. Then you can  
pair with a headset.  
46  
Bluetooth  
Your phone waits for the headset’s response.  
With the password accepted, the headset  
shows in My devices.  
Device list options  
You can change or review the information about  
each headset you paired with your phone.  
1. Select Menu > Settings > Bluetooth >  
Using Bluetooth  
My devices.  
Before you can use the Bluetooth wireless  
technology functions of your phone, you must get  
your phone ready to communicate with a headset.  
This is called “connecting.”  
2. Highlight your desired headset.  
3. Select Options and one of the following:  
Rename to rename the headset.  
Delete to remove the headset from  
your phone if you are no longer going  
to use it.  
Connecting to a headset  
To connect your phone to an audio Bluetooth  
wireless technology headset:  
Services to view a description of  
the headset.  
1. Select Menu > Settings > Bluetooth >  
My devices.  
Bluetooth settings  
2. At the device list, highlight a headset and  
select Connect.  
You can set how your phone interacts with  
Bluetooth wireless technology devices. Select  
Menu > Settings > Bluetooth > Settings and  
one of the following:  
A notification appears confirming the connection.  
You can now use the headset with your phone.  
Disconnecting from a headset  
My name changes the name of your phone for  
other devices it is paired with to identify.  
To disconnect your phone from an audio  
Bluetooth wireless technology headset:  
Visible duration sets the time your phone  
remains visible to other devices.  
1. Select Menu > Settings > Bluetooth >  
My devices.  
Services shows the list of the Bluetooth  
wireless technology service protocol  
supported by your phone.  
2. At the device list, highlight a headset and  
select Disconnect.  
User Guide  
47  
Volume  
Keyguard  
Ringtone, Key, Earpiece, and  
Speakerphone Volume  
Lock the keyguard  
The keyguard locks the external number keypad  
on your phone to prevent accidental keypresses  
when the phone is turned on and a call is not in  
progress. You can still answer or silence an  
incoming call.  
To adjust the ringtone, keypad tone, earpiece, or  
speakerphone volume:  
1. Select Menu > Settings > Sounds >  
Ringtone volume, Key volume, Earpiece  
volume, or Spkrphone volume.  
• To lock the keypad, press and hold the  
2. Scroll right to increase the volume, or left to  
* Shift key.  
decrease the volume.  
• To unlock the keypad, select Keyguard and  
3. Select Save.  
press the OK key.  
Smart volume  
Set the keyguard  
To automatically adjust the volume during a call  
based on surrounding noise levels, select Menu >  
Settings > Sounds > Smart volume > Enabled.  
You can set the phone to lock the keypad  
automatically when the flip is closed. Select  
Menu > Settings > Keyguard > Guard on close  
to activate the keyguard everytime the flip  
is closed.  
Ringtones  
Your phone has multiple ringtones you can  
choose for incoming calls. You can also assign  
ringtones for contacts in your business or  
personal group. Select Menu > Settings >  
Sounds > Ringtones, Business ringtones, or  
Personal ringtones and a ringtone. You can hear  
the ringtones as you scroll down the list.  
Sounds  
Your phone has several settings for sound control.  
You can select from a variety of ringtones and  
control the volume.  
48  
Keyguard  
Flip Sounds  
Other alerts  
To set your phone’s sound tones when its flip  
closes or opens, select Menu > Settings >  
Sounds > Flip closed or Flip open and a  
sound. You can hear the sounds as you scroll  
down the list.  
You can choose the alert type for voicemails,  
pages, text messages or missed calls. Select  
Menu > Settings > Sounds > Alerts >  
Msg alert, Page alert, Voicemail alert, or  
Missed call alert and a ringtone. Scroll through  
the list to hear the different ringtones. You can  
also select Menu > Settings > Sounds >  
Alerts > Reminder > On to set the phone to  
notify you with the selected ringtone every five  
minutes until you address the alert.  
Power on/off sound  
You can set your phone to play a sound when it  
powers on or off. Select Menu > Settings >  
Sounds > Power on/off sound > Enabled.  
Key length  
Display  
To control the length of the keypad tones, select  
Menu > Settings > Sounds > Key length and  
one of the following:  
Greeting banner  
The banner is the personal label for your phone.  
It appears on the main screen above the time and  
date. The banner can be up to 14 characters long.  
To change your banner:  
Normal sets the keypad tones to  
normal length.  
Long sets the keypad tones to long length.  
1. Select Menu > Settings > Display >  
Greeting banner.  
Alerts  
2. Select Edit and press the Back key to clear  
Minute alert  
the current banner.  
Your phone can alert you with a short beep ten  
seconds before each minute passes during a call.  
Select Menu > Settings > Sounds >  
Minute alert > Enabled.  
3. Enter your new text and select Save.  
User Guide  
49  
Menu style  
To select a menu style, select Menu > Settings >  
Display > Menu style and one of the following:  
Screensavers  
Screen savers appear on the main screen when  
the flip is open or closed. A screen saver activates  
10 seconds after the last keypress. Incoming calls  
and alerts override the screen savers. See  
“Wallpapers” on page 50.  
Graphic displays icons of each menu item,  
with its name at the bottom of the screen.  
List displays a list of each menu item.  
The next time you select Menu from the main  
screen, your selected menu style appears.  
Backlight  
Your screen lights up while you are in a call or  
when you press a key on the keypad. The  
backlight automatically turns off when the  
phone is inactive.  
Wallpapers  
You can select a wallpaper for your phone’s  
main screen.  
Backlight duration  
1. Select Menu > Settings > Display >  
You can set the length of time that bright  
backlighting remains on. Select Menu >  
Settings > Display > Backlight > Duration and  
one of the following:  
Wallpapers.  
2. Select one of the following options:  
Scroll to highlight a wallpaper, press  
the OK key, and select Assign to select  
a wallpaper.  
Disabled turns backlighting off.  
7 seconds, 15 seconds, or 30 seconds  
turns backlighting on for the set time after  
your last keypress.  
Select Options > Take a picture to take  
a new picture.  
Select Options > My pictures to select  
an existing picture.  
Select Options > My graphics to select  
an existing image.  
7 sec. & in call, 15 sec. & in call, or 30 sec.  
& in call turns backlighting on for the  
duration of a call, and for the set time after  
your last keypress.  
3. Follow the prompts to save your selection.  
Note: The “in call” settings drain the battery  
more quickly.  
50  
Display  
Power save mode  
Open to answer  
You can conserve battery life by activating power  
save mode to dim the backlight. The power save  
mode sets the backlight of the phone to the lowest  
level. Select Menu > Settings > Display >  
Backlight > Pwr save mode > On.  
You can open the flip of your phone to answer a  
call. Select Menu > Settings > Convenience >  
Open to answer > Enabled.  
Fast find  
To use fast find, select Menu > Settings >  
Convenience > Fast find > Enabled.  
Auto-hyphen  
Auto-hyphenation, when enabled, automatically  
inserts hyphens into your phone numbers to be  
consistent with the U.S. dialing plan, such as  
1-222-333-4444. Select Menu > Settings >  
Display > Auto-hyphen > Enabled.  
With Fast find enabled, you can press one or two  
keys to view close matches of the number you are  
looking for.  
1. With the number keypad, from the main  
screen, press the keys corresponding to the  
letters of the name you want to find. A  
Time and date format  
matching contact or speed dial entry appears.  
Your phone can display different time/date  
formats. Select Menu > Settings > Display >  
Time/Date format and a format.  
2. Highlight the contact you want and press the  
Call key to call the number.  
Frequent list  
To use frequent list, select Menu > Settings >  
Convenience > Frequent list > Enabled.  
Brightness  
To change the brightness of the display:  
1. Select Menu > Settings > Display >  
From the main screen, select Contacts. With the  
Frequent list enabled, the last 15 contacts of  
your most frequently called contacts appear.  
Scroll past the double line to view the entire  
contacts list.  
Brightness.  
2. Scroll to change the brightness.  
3. Select Save.  
Convenience  
You phone provides you with settings that may  
make your phone more convenient to use.  
User Guide  
51  
Note: If you are already on a call and you receive  
another call, you cannot place the incoming call  
on hold. With no call waiting enabled, the call  
goes to voicemail instead.  
Hold call  
With the Hold call feature, you can place  
incoming calls on hold until you are ready to  
answer them.  
When a call comes in:  
Note: The Hold call feature does not work with  
the Open to answer feature enabled. See “Open to  
answer” on page 51.  
1. Select Hold call. The caller is placed on hold  
and then hear your recorded hold message.  
2. Select Answer to speak to the caller on hold  
Enable hold call feature  
or End call to hang up without speaking.  
1. Select Menu > Settings > Convenience >  
Change the hold message  
Hold call and one of the following:  
1. Select Menu > Settings > Convenience >  
Disabled turns hold call off.  
Enabled turns hold call on.  
Re-record msg records a new hold  
call message.  
Hold call > Re-record msg.  
2. Record the message twice, as prompted.  
3. Select Save to save the message or Options  
and one of the following:  
2. With no hold message recorded, the phone  
prompts you to record one, such as “Please  
hold. I’ll answer in a minute.”  
Play to replay your message.  
Re-record to record your  
message again.  
3. Record the message twice, as prompted.  
Exit to exit.  
4. Select Save to save the message or Options  
and one of the following:  
1-Touch dialing  
Play to replay your message.  
Re-record to record your  
message again.  
The 1-touch dialing feature is the fastest way to  
speed dial a contact that has a speed dial location.  
To use 1-touch dialing, you must enable 1-touch  
dialing on your phone and have a speed dial  
location assigned to a contact. To enable 1-touch  
dialing, select Menu > Settings >  
Exit to exit.  
The next time a call comes in, you can place  
it on hold.  
Convenience > 1-Touch dialing > Enabled. To  
call a contact that has a speed dial location, press  
and hold the speed dialing number.  
Place a call on hold  
You can place a call on hold once you have  
enabled the Hold call feature.  
52  
Convenience  
Note: If it is a two-digit number, press the first  
digit briefly, then press and hold the second digit.  
For example, if the speed dialing location is 15,  
press 1 briefly, then press and hold 5.  
Erase voice dial  
You can erase all existing voice dial tags from  
your phone. Select Menu > Settings >  
Call options > Erase voice dial > Yes.  
Any key  
Voice training  
If you phone is having trouble recognizing your  
voice, you can train with the Yes, No, and  
Wake up commands. Select Menu > Settings >  
Call options > Voice training > OK > Train All  
or the item you want to train. Follow the prompts  
for each word until training is complete.  
To set the phone to answer or silence calls when  
you press any key, select Menu > Settings >  
Convenience > Any key > Any key answer (to  
answer calls with any key except the End, Back,  
or Navigation key) or Any key mute (to mute the  
ringtone on incoming calls with any key except  
the Send or Speakerphone key).  
Voice wake-up  
You can set your phone to make a call using a  
hands-free accessory.  
Call options  
Use Call options to customize the voice  
commands.  
Note: Voice wake-up does not work with  
keyguard active.  
Add voice dial  
You can add a new voice dial to your phone.  
Enable voice wake-up  
Select Menu > Settings > Call options >  
Voice wake-up > With accessory to enable calls  
with an accessory.  
1. Select Menu > Settings > Call options >  
Add voice dial.  
2. At the voice prompt, say a name.  
3. At the voice prompt, repeat the name.  
4. Select one of the following:  
Use voice wake-up  
To wake up the phone:  
Add New creates a new contact.  
Add to existing adds the voice tag to an  
existing contact.  
1. Say “Wake Up” and listen for a tone.  
2. Say “Wake Up” again until you hear  
two tones.  
If the phone does not recognize your Wake Up  
command, see “Voice training” on page 53.  
User Guide  
53  
Expert sets phone to sound tones instead of  
voice prompts.  
Voice answer  
You can set your phone to answer a call  
automatically when using a hands-free headset.  
Auto-answer  
Enable voice answer  
With a hands-free headset attached, you can set  
your phone to answer automatically. Select  
Menu > Settings > Call options >  
Auto-answer > After 5 seconds to set the phone  
to automatically answer after 5 seconds.  
Select Menu > Settings > Call options >  
Voice answer > Enabled to enable answering a  
call with an accessory. To use the Voice answer  
feature, you must have the Auto-answer feature  
(see “Auto-answer” on page 56) disabled and the  
phone set to Normal Sounds.  
Messaging  
Messaging settings help configure your phones  
text and picture message settings.  
Use voice answer  
When you receive an incoming call, the phone  
prompts “Incoming call, answer?” or “Incoming  
roam call, answer?” If the caller is recognized as a  
contact entry in your phone, the phone prompts  
“Incoming call from (Name), answer?”  
See “Message settings” on page 28.  
Camera  
You can set up how your camera takes pictures.  
Select Menu > Settings > Camera and one of the  
following:  
Say “Yes” or press any key except the End key to  
answer. Say “No” and press the End key to silence  
the alert. Remain silent. The voice alert repeats  
twice and the phone rings once, then returns to  
the main screen.  
Resolution sets the horizontal and vertical  
number of pixels for the picture.  
Picture quality sets the picture compression.  
The higher the compression, the better the  
detail of the picture (higher pixel rate). When  
set to High, the picture file size is larger, using  
more memory.  
Expert mode  
With the expert mode enabled, instead of  
speaking a command following the initial voice  
prompts, you can speak the command after you  
hear a tone.  
Shutter sound sets the sound used when the  
camera takes a picture.  
Viewfinder display sets the camera  
viewfinder as Fullscreen or Actual.  
Select Menu > Settings > Call options >  
Expert mode and one of the following:  
Normal sets phone to default voice prompts.  
54  
Messaging  
5. Re-enter your new lock code.  
Security  
The lock is now changed.  
This section describes all the features involved in  
securing your phone and preventing access to  
personal information. All security features are  
shielded by a four-digit lock code.  
Emergency numbers  
The emergency numbers feature allows you to  
specify three personal phone numbers that can be  
called when the phone is locked.  
Lock phone  
When your phone is locked, you can call only  
emergency numbers or Virgin Mobile’s  
customer service number. You can still receive  
incoming calls.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
3. Select Emergency numbers.  
4. Select an Unassigned slot.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
5. Enter the phone number, including the area  
code. Do not enter 1 before the area code.  
3. Select Lock phone and one of the following:  
6. Select Done.  
Never leaves the phone always unlocked.  
On power up locks the phone every time  
you turn it on.  
You can view these numbers only when they’re  
being entered for the first time. To make a call to  
an emergency number from a locked phone, you  
must dial the number (including area code)  
exactly as it is stored in Emergency numbers.  
Now locks the phone immediately.  
To unlock the phone:  
1. From the main screen, select Unlock.  
2. Enter your four-digit lock code.  
Erase contacts  
You can erase all entries from your contacts list.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
3. Select Erase contacts > Yes > Yes.  
Change lock code  
Change your lock code from the default provided  
by the service provider. The lock code is typically  
0000 or the last 4 digits of your phone number.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
3. Select Change lock code > Yes.  
4. Enter a new four-digit code.  
User Guide  
55  
Network  
Accessories  
This section describes settings that affect the  
accessories you use with your phone.  
Privacy alert  
To set your phone to alert you when enhanced  
digital CDMA privacy is lost or regained, select  
Menu > Settings > Network > Privacy alert >  
Enabled.  
Headset sound  
With a headset attached to your phone, the  
ringtone can be played through the headset or  
phone speaker. Select Menu > Settings >  
Accessories > Headset sound and one of  
the following:  
Location  
Use this setting to share your location information  
with network services other than emergency  
services (for example, 911, 111, 999 and 000) in  
markets where service has been implemented.  
Select Menu > Settings > Network > Location  
and one of the following:  
Out of phone rings from the phone speaker.  
Out of headset rings from the headset.  
Auto-answer  
With a hands-free headset attached, you can set  
your phone to answer automatically. Select  
Menu > Settings > Accessories >  
Auto-answer > After 5 seconds to set the phone  
to automatically answer after 5 seconds.  
911 only (default) shares your position  
information only with emergency services  
when you call your 3-digit emergency code.  
Location on shares your position information,  
in addition to emergency services.  
Power backlighting  
Note: This feature works only when your phone  
is in digital mode. You cannot turn off the locator  
to emergency services.  
You can set backlighting to remain on when an  
external power source, such as the AC adapter, is  
used with the phone.  
Note: Power backlighting may not be available  
with the optional desktop charger or other  
accessories. The battery charges more slowly with  
power backlighting on.  
Select Menu > Settings > Accessories >  
Pwr backlighting > Normal or Always on.  
56  
Network  
Tip: Use the power backlighting as a night light  
when traveling.  
TTY device  
You can connect the phone to a TTY device for the  
hearing impaired.  
Note: Enable TTY device only when using the  
phone with a TTY device.  
1. Connect the TTY device to the phone.  
2. Select Menu > Settings > Accessories >  
TTY device (or enter ##889 from the main  
screen and select TTY) > OK > TTY on.  
Hearing aid  
You can use your phone with a hearing aid device.  
Select Menu > Settings > Accessories >  
Hearing aid > OK > Enabled.  
Note: Enable Hearing aid only when using the  
phone with a hearing aid device.  
Phone information  
You can access information regarding your  
phone. Select Menu > Settings > Phone info and  
one of the following:  
Build info shows specific software and  
hardware information for your phone.  
Icon keys shows the icons used by  
your phone.  
User Guide  
57  
13 Tools  
Rename to rename the sound.  
Details to look at details of the file.  
Erase all to erase all memos stored.  
Voice memo  
The Voice memo tool enables you to record and  
play back audio memos.  
Playback tools  
When you playback a sound, scroll left or right to  
select the playback tools displayed on the screen.  
Record voice memos  
To record new voice memos:  
1. Select Menu > Tools > Voice memo >  
Record new.  
Start or continue the file.  
Stop the playback.  
2. Record your voice memo. Select Stop when  
you are done.  
3. Select Save to save your memo.  
Pause the playback.  
Mute the playback.  
Unmute the playback.  
If an incoming call is received while you are  
recording a memo, the memo is saved and the  
incoming call screen appears.  
Review voice memos  
To play and use voice memos:  
Scheduler  
Use the Scheduler to schedule events and set  
reminder alerts.  
1. Select Menu > Tools > Voice memo >  
Recorded memos.  
2. At the file list, highlight a file.  
Create an event  
1. Select Menu > Tools > Scheduler >  
3. Select Play to listen to the memo or Options  
and one of the following:  
Add new event.  
Record new to record a new  
voice memo.  
2. At the Event Name field, enter a name. Scroll  
down to move to the next field when done.  
Erase to erase the memo.  
Lock to prevent accidental erasing of  
the sound.  
3. At the Type field, press OK and scroll through  
the list to select a type.  
58  
Voice memo  
4. At the Date field, press OK to change the date.  
10. At the Silent Mode field, press OK and select a  
Silent mode setting.  
Scroll left or right to move between  
month, day, and year fields.  
Scroll up or down to change month, day,  
and year.  
11. At the Recurring Event field, press OK and  
select an option from the list.  
12. Select Save.  
Press OK to save date and move to the  
next field.  
View events  
You can view the events saved to the scheduler.  
5. At the Time field, press OK to change  
the time.  
View by date  
Scroll left or right to move between hour,  
minute and AM/PM fields.  
1. Select Menu > Tools > Scheduler and one  
of the following:  
Scroll up or down to change hour,  
minute and AM/PM.  
View month to see the current month.  
Days with events are highlighted. Scroll  
through the calendar and press OK to  
select a date.  
Press OK to save time and move to the  
next field.  
6. At the Duration field, press OK to change  
View day to see the current date. Scroll  
right or left to move to another date.  
Go to date to select a specific date. Scroll  
left or right to move between month, day,  
and year fields. Scroll up or down to  
change month, day, and year. Press OK to  
select the date.  
the duration.  
Scroll left or right to move between hour  
and minute fields.  
Scroll up or down to change hour  
and minute.  
Press OK to save duration and move to the  
2. At the day view, do one of the following:  
next field.  
Highlight an existing event and press the  
OK key to view the event detail.  
Highlight a time and select Add new to  
create a new event.  
Select Options > Go to today to return  
to the current date.  
7. At the Priority field, press OK and select a  
priority from the list.  
8. At the Reminder field, press OK and select a  
reminder from the list.  
9. At the Reminder Sound field, press OK and  
select a reminder sound from the list.  
User Guide  
59  
Select Options > Go to Date to select a  
specific date.  
Select Options > Erase all Events to  
erase all event for that date.  
Scheduler settings  
You can change the default settings of  
your scheduler.  
Select Menu > Tools > Scheduler > Settings  
and one the following:  
View by list  
Scheduler hours to change the work day.  
Auto delete to select when events are  
automatically deleted.  
Priority to select the priority given to  
new events.  
1. Select Menu > Tools > Scheduler >  
View all events.  
2. At the event list, highlight a event.  
3. Select View to see the event detail or one the  
of the following:  
Reminder to select the reminder given to  
new events.  
Select Options > Sort by time to sort  
events by time.  
Select Options > Sort by type to sort  
events by type.  
Select Options > Sort by priority to sort  
events by priority.  
Reminder sound to select the sound alert  
given to new event reminders.  
Silent mode to select whether phone is  
in Silent mode during the duration of  
new events.  
Modify an event  
Alarm clock  
You can set up to four alerts with your phone’s  
three alarm clocks and one quick alarm.  
You can modify existing events. From the event  
detail screen, you can select OK to return to  
the previous screen or Options and one  
the following:  
Note: The alert occurs only if the phone is on.  
Edit to change the event.  
Erase to erase the event.  
Copy to copy the event.  
Use alarm clocks  
1. Select Menu > Tools > Alarm clock.  
2. Highlight one of the alarms and select Set.  
3. At the Time field, press OK to change  
the time.  
Scroll left or right to move between hour,  
minute and AM/PM fields.  
60  
Alarm clock  
Scroll up or down to change hour,  
minute and AM/PM.  
3. Select the percentage amount to tip. The new  
bill amount is shown.  
Press OK to save time and move to the  
4. Select Done to return to menu or Split to  
next field.  
split the bill.  
4. At the Alarm Sound field, press OK and select  
5. To split the bill, enter the number of guests  
and select Next. The phone shows the  
amount each guest pays. Select Done to  
return to menu.  
a sound from the list.  
5. At the Recurring Alarm field, press OK and  
select an option from the list.  
6. At the Note field, enter a note and press OK.  
Calculator  
Use the Calculator for basic mathematical  
equations.  
7. Select Save.  
When the alarm rings, select Off to turn off the  
alarm or Snooze to silence the alarm for  
10 minutes.  
1. Select Menu > Tools > Calculator.  
2. Enter the first number.  
Tip: Opening the flip turns off the alarm.  
3. Use the Navigation key to select  
Use quick alarm  
1. Select Menu > Tools > Alarm clock.  
2. Highlight the quick alarm and select Set.  
mathematical operation.  
Press left to multiply.  
Press right to divide.  
Press up to add.  
3. At the Time field, select a time option. A  
Press down to subtract.  
notification shows the quick alarm is on.  
4. Enter the second number and press OK to get  
When the quick alarm rings, select Off to turn off  
the alarm or Reset to set the quick alarm again.  
the result.  
5. Select Exit to return to menu or Options and  
Tip calculator  
The Tip calculator helps you calculate how much  
tip to include with a bill.  
one of the following:  
M+ adds the displayed result to the value  
stored in memory.  
MR displays the currently stored value on  
the screen.  
MC clears the currently stored value  
in memory.  
1. Select Menu > Tools > Tip calculator.  
2. Enter the amount of your bill and select Next.  
User Guide  
61  
Timer  
The Timer counts down for the specified time and  
beeps when that amount of time has elapsed.  
Flashlight  
You phone comes with a flashlight. Select Menu >  
Tools > Flashlight > Turn on to activate the  
light, which stays on until you turn it off.  
1. Select Menu > Tools > Timer > Set.  
Note: You can also press and hold the Back key  
to turn on the flashlight. Once you release the  
Back key, the flashlight turns off.  
2. At the Set Timer, enter the time length.  
• Scroll left or right to move between hours,  
minutes and seconds fields.  
• Scroll up or down to change hours,  
minutes and seconds.  
3. If need, select Sound and one of the sounds  
to change the sound.  
4. To work the timer, select the  
following options:  
Start to begin the countdown.  
Stop to pause the countdown.  
Reset to clear the timer.  
When the countdown is complete select Off to  
silence the alarm.  
Stopwatch  
The Stopwatch counts time for you.  
1. Select Menu > Tools > Stopwatch.  
2. To work the stopwatch, select the following  
options:  
Start to begin counting.  
Stop to pause counting.  
Reset to clear the stopwatch.  
Press the Back key to return to the menu.  
62  
Timer  
14 Voice recognition  
With voice features, you can call a contact, dial a  
phone number, access menus, or find contact  
information from your voice dial list using  
voice recognition.  
Voice commands  
With voice commands, you speak your commands  
into the phone’s microphone.  
Start voice commands  
1. Press the Call key to initiate voice commands.  
Note: You cannot use voice recognition to end a  
call; you must press the End key when the flip  
is open.  
The phone prompts, “Say a name or say dial”.  
2. Say one of the following commands and  
Voice dial list  
follow the voice prompts.  
To call or find a contact using voice dial you must  
add the contact to your voice dial list. The contact  
name must not have more than three words or  
components for voice dialing recognition.  
• “Say a name” to call a contact on your  
voice dial list.  
Dial” to speak the digits of the  
phone number.  
3. Press the Call key again to exit and go to the  
Add a voice tag  
You can add a voice dial tag to your phone. See  
“Add voice dial” on page 53.  
Recent calls list.  
Call a contact  
Before calling a person, you need to add the  
contact name to the Voice dial list.  
See “Add voice dial” on page 53.  
Edit a voice tag  
To edit existing voice dial tags;  
1. Select Menu > Contacts > Voice dial list.  
2. Select your desired contact.  
1. From the main screen, press the Call key. The  
phone prompts, “Say a name”.  
3. Highlight the number with a voice tag and  
select Options > Add voice dial, Edit voice  
dial or Erase voice dial.  
2. Say the name of the person you want to call.  
3. If the name you said matches a contact in the  
Voice dial list, the phone responds: “Calling  
(Name).” Remain silent to make the call, or  
say “No” to cancel.  
4. Follow the prompts.  
User Guide  
63  
4. If the phone finds multiple voice tags that  
sound like the name you said, the phone lists  
the names and asks you to verify which name  
you want to call. Say “Yes” when you hear the  
correct name. Say “No” when you hear an  
incorrect name.  
Say “Verify” to cause phone to repeat the  
set of digits you input.  
Say “Cancel” to exit voice recognizer and  
return to the main screen.  
Speak a digit to enter the next digit. Once  
the phone repeats the digit, you can  
speak the next digit or pause to hear the  
prompt.  
5. Press the End key to end the call.  
Call Using Digit Dial  
When using digit dialing, you speak digits to dial a  
phone number.  
4. Press the End key to end the call.  
Voice Command Settings  
To customize the voice commands, see “Call  
options” on page 53.  
Note: You cannot speak a string of digits.  
You must speak one digit at a time and wait for  
the prompt.  
1. From the main screen, press the Call key. The  
phone prompts, “Say a name or say dial”.  
2. Say “Dial”. The phone responds  
“Speak a digit”.  
3. Speak the first digit of the phone number you  
want to call. Once the phone repeats the digit,  
you can speak the next digit.  
If you pause, the phone prompts you with one  
of the following options. After the prompt,  
speak an option:  
Say “Clear” to erase the last digit entered.  
The phone responds: “Digit cleared.” To  
clear the entire phone number, say  
“Clear” again. When the phone prompts  
you with “Clear entire phone number?”,  
say “Yes” to clear or “No” to cancel.  
Say “Call” to dial the number.  
64  
Voice Command Settings  
15 Getting Help  
The steps you took to reproduce the problem.  
The phone’s mobile equipment ID (MEID). To  
locate the MEID, select Menu > Settings >  
Phone info > Build info and scroll down  
to MEID.  
Customer Support  
To contact Virgin Mobile’s customer support  
department for information about your phone,  
account history, call coverage area, and specific  
features available to you, such as call forwarding  
or voicemail:  
Qualified service  
Dial *VM from your Virgin Mobile phone.  
Dial 888-322-1122 from any phone.  
If the problem with your phone persists, return  
the phone with all accessories and packaging to  
the dealer for qualified service.  
For questions about the phone features, refer to  
the materials provided with your phone, or visit  
Phone accessories  
To shop for phone accessories, visit  
call us at 800-349-4188 (U.S.A. only) or  
858-882-1410.  
For additional questions, you may contact the  
Kyocera Wireless Corp. Customer Care Center in  
any of the following ways:  
Phone: 1-800-349-4478 (U.S. and Canada) or  
1-858-882-1401.  
Product evaluation  
To participate in the testing and evaluation of  
Kyocera Wireless Corp. products, including  
cellular or PCS phones, visit  
Before requesting support, please try to  
reproduce and isolate the problem. When you  
contact the Customer Care Center, be ready to  
provide the following information:  
beta.kyocera-wireless.com.  
The name of your service provider:  
Virgin Mobile.  
The actual error message or problem you  
are experiencing.  
User Guide  
65  
16 Consumer Limited Warranty  
Kyocera Wireless Corp. (“KYOCERA”) offers you a  
limited warranty that the enclosed product or  
products (the “Product”) will be free from  
defects in material and workmanship for a period  
that expires one year from the date of sale of the  
Product to you, provided that you are the original  
end-user purchaser of the Product and provided  
that your purchase was made from an authorized  
supplier. Transfer or resale of a Product will  
automatically terminate warranty coverage with  
respect to that Product. This limited warranty is  
not transferable to any third party, including but  
not limited to any subsequent purchaser or owner  
of the Product.  
After the one year warranty period, you must pay  
all shipping, parts and labor charges.  
This limited warranty does not cover and is void  
with respect to the following: (i) any Product  
which has been improperly installed, repaired,  
maintained or modified; (ii) any Product which  
has been subjected to misuse (including any  
Product used in conjunction with hardware  
electrically or mechanically incompatible or used  
with accessories not approved by KYOCERA),  
abuse, accident, physical damage, abnormal  
operation, improper handling, neglect, exposure  
to fire, water or excessive moisture or dampness  
or extreme changes in climate or temperature;  
(iii) any Product operated outside published  
maximum ratings; (iv) cosmetic damage; (v) any  
Product on which warranty stickers or Product  
serial numbers have been removed, altered, or  
rendered illegible; (vi) cost of installation,  
removal or reinstallation; (vii) signal reception  
problems (unless caused by defects in material  
and workmanship); (viii) damage the result of  
fire, flood, acts of God or other acts which are not  
the fault of KYOCERA and which the Product is not  
specified to tolerate, including damage caused by  
mishandling, shipping and blown fuses; (ix)  
consumables (such as fuses); or (x) any Product  
which has been opened, repaired, modified or  
altered by anyone other than KYOCERA or a  
KYOCERA authorized service center.  
KYOCERA shall, at its sole and absolute discretion,  
either repair or replace a Product (which unit  
may use refurbished parts of similar quality and  
functionality) if found by KYOCERA to be defective  
in material or workmanship, or if KYOCERA  
determines that it is unable to repair or replace  
such Product, KYOCERA shall refund the purchase  
price for such Product, provided that the subject  
Product (i) is returned, with transportation  
prepaid, to a KYOCERA authorized service center  
within the one year warranty period, and (ii) is  
accompanied by a proof of purchase in the form  
of a bill of sale or receipted invoice which  
evidences that the subject Product is within the  
one year warranty period (“Proof of Purchase”).  
66  
Product evaluation  
USE ONLY KYOCERA APPROVED ACCESSORIES  
WITH KYOCERA PHONES. USE OF ANY  
UNAUTHORIZED ACCESSORIES MAY BE  
DANGEROUS AND WILL INVALIDATE THE PHONE  
WARRANTY IF SAID ACCESSORIES CAUSE  
DAMAGE OR A DEFECT TO THE PHONE.  
STATUTORY OR OTHERWISE, WITH RESPECT TO  
THE PRODUCTS, INCLUDING BUT NOT LIMITED  
TO ANY IMPLIED WARRANTY OR CONDITION OF  
MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE OR AGAINST  
INFRINGEMENT OR ANY IMPLIED WARRANTY OR  
CONDITION ARISING OUT OF TRADE USAGE OR  
OUT OF A COURSE OF DEALING OR COURSE OF  
PERFORMANCE. NO DEALER, DISTRIBUTOR,  
AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE  
ANY MODIFICATION OR ADDITION TO THIS  
WARRANTY.  
KYOCERA SPECIFICALLY DISCLAIMS LIABILITY  
FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL,  
GENERAL, PUNITIVE, EXEMPLARY, AGGRAVATED,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES,  
EVEN IF ADVISED OF THE POSSIBILITY THEREOF,  
WHETHER FORESEEABLE OR UNFORESEEABLE  
OF ANY KIND WHATSOEVER, INCLUDING BUT  
NOT LIMITED TO LOSS OF PROFITS,  
UNANTICIPATED BENEFITS OR REVENUE,  
ANTICIPATED PROFITS ARISING OUT OF USE OF  
OR INABILITY TO USE ANY PRODUCT (FOR  
EXAMPLE, WASTED AIRTIME CHARGES DUE TO  
THE MALFUNCTION OF A PRODUCT) OR  
Some jurisdictions do not allow the exclusion or  
limitation of incidental or consequential damages,  
or allow limitations on how long an implied  
warranty lasts, so the above limitations or  
exclusions may not apply to you. This limited  
warranty gives you specific legal rights, and you  
may also have other rights which vary from  
jurisdiction to jurisdiction.  
CONTRIBUTION OR INDEMNITY IN RESPECT OF  
ANY CLAIM RELATED TO A PRODUCT.  
For warranty service information, please call the  
following telephone number from anywhere in the  
continental United States and Canada: 1-800-349-  
4478 or 858-882-1401; or contact KYOCERA at  
the following address: 10300 Campus Point Drive,  
San Diego, California, 92121-1582, USA,  
REPAIR OR REPLACEMENT OF A DEFECTIVE  
PRODUCT OR REFUND OF THE PURCHASE PRICE  
RELATING TO A DEFECTIVE PRODUCT, AS  
PROVIDED UNDER THIS WARRANTY, ARE YOUR  
SOLE AND EXCLUSIVE REMEDIES FOR BREACH  
OF THE LIMITED WARRANTY, AND SUBJECT TO  
THIS WARRANTY, THE PRODUCTS ARE  
APPROVED AND ACCEPTED BY YOU “AS IS”.  
KYOCERA MAKES NO OTHER WARRANTIES,  
REPRESENTATIONS OR CONDITIONS OF ANY  
KIND, ORAL OR VERBAL, EXPRESS OR IMPLIED,  
Attention: Technical Support.  
DO NOT RETURN YOUR PRODUCTS TO THE  
ABOVE ADDRESS. Please call or write for the  
location of the Kyocera Wireless Corp. authorized  
service center nearest you and for procedures for  
obtaining warranty service.  
User Guide  
67  
Index  
Numerics  
1-touch dialing, 14, 52  
installing, 1  
sending picture, 24  
settings, 54  
shutter sound, 44  
taking a picture, 43  
white balance, 44  
capitalization, 17, 20  
charger, vi  
recharging, 1  
Bluetooth, 46  
A
connecting to other devices,  
47  
accessory, v, vi, 2, 56, 65  
activation of phone, 3  
add address, 23  
add voice dial, 53  
air bag, iii  
aircraft, iv  
alarm clock, 60  
pairing, 46  
settings, 47  
turning on, 46  
color tone, 44  
contacts, 30  
brightness, 44, 51  
build information, 57  
accessing, 30  
adding, 30  
alert  
C
adding extension, 31  
changing number type, 31  
editing, 31  
message settings, 28  
minute alert, 49  
missed calls, 41  
privacy, 56  
calculator, 61  
call history. See call log  
call history. See recent calls  
call list. See recent calls  
call log  
group, 32  
groups, 34  
voicemail, 15  
notes, 33  
erasing, 42  
answering calls, 12  
auto text, 28  
auto-answer, 54, 56  
auto-erase, 29  
auto-hyphen, 51  
number type, 34  
picture, 31, 34  
primary number, 32  
ringtone, 31, 33, 34  
saving, 31  
missed calls, 41  
call log. See recent calls  
call options, 53  
call timers, 42  
calls  
B
answering, 12  
emergency, 15  
ending, 13  
searching, 35  
back cover, 7  
lock, 1, 2, 7  
backlight, 50  
duration, 50  
power, 56  
power save mode, 51  
banner  
secret address, 32, 33  
secret note, 33  
secret numbers, 32  
speed dial, 32  
camera, 43  
color tone, 44  
flash, 7, 43  
LED, 44  
lens, 7  
multiple pictures, 44  
options, 43  
resolution, 43, 54  
self timer, 43  
speed dial list, 35  
street address, 33  
voice dial, 32  
greeting, 49  
battery, vi  
voice dial list, 35  
Web address, 32, 33  
convention  
caring, 1  
charging, 1  
using this guide, 11  
68  
G
game  
custom menu, 13  
sounds, 49  
keyguard, 48  
settings, 48  
keypad  
customer support, 65  
downloading, 39  
D
greeting banner, 49  
groups, 34  
default  
number, 4  
QWERTY, 6  
text entry, 29  
display settings, 49  
download, 39  
assigning message alert, 35  
assigning picture, 35  
assigning ringer, 35  
creating, 34  
L
LED, 44  
E
left option button, 11  
location, 56  
lock  
earpiece, 13  
editing, 35  
erasing, 35  
sending multimedia messag-  
es, 35  
sending text messages, 35  
using, 35  
volume, 48  
electronic serial number (ESN).  
See MEID (mobile equipment  
ID)  
back cover, 1, 2, 7  
keyguard, 48  
phone, 55  
email messages, 26  
emergency call, 15  
emergency number  
security, 55  
lock code  
changing, 55  
lock msg, 23  
H
hard pause, 31  
headset ringing, 56  
headset sound. See headset  
ringing  
enhancement. See accessory  
ESN (electronic serial number).  
See MEID (mobile equipment  
ID)  
M
main menu, 10  
making calls, 12  
medical device, iv  
MEID (mobile equipment ID), 65  
menu, 10  
hearing aid, iv, v, 57  
hearing-impaired usage, iv, v  
hold call, 14, 52  
evaluation  
product, 65  
event  
I
custom, 13  
changing, 60  
icons, 9  
IM, 26  
IM address  
contacts, 32  
Inbox, 23, 25  
instant messages, 26  
settings, 45  
creating, 58  
style, 50  
viewing, 59  
message  
expert mode, 54  
eyelet, 7  
completing, 27  
erasing, 26  
F
failed or pending, 28  
forwarding, 23  
forwarding picture, 25  
indicators, 28  
notification, 23  
options, 23  
fast find, 51  
flash, 43  
flashlight, 62  
frame, 44  
frequent list, 51  
K
key  
frequently used, 8  
navigation, 11  
volume, 48  
key length  
reading, 23  
User Guide  
69  
receiving multimedia, 25  
replying multimedia, 25  
replying text, 23  
normal alpha mode, 16  
notes  
contacts, 33  
number  
entering, 16, 19  
number keypad, 4  
entering text, 19  
number type  
contacts, 34  
numbers only mode, 19  
indicators and icons, 44  
options, 43  
picture. See camera  
playback, 58  
retrieving text, 23  
power backlighting, 56  
power save mode, 51  
prepend, 32  
sending and receiving, 27  
sending text, 22  
usage tips, 27  
primary number  
contacts, 32  
privacy alert, 56  
viewing multimedia, 25  
message settings, 28  
alert, 28  
messaging settings, 54  
minute alert, 49  
missed call, 41  
alert, 41  
O
Q
Outbox, 27  
qualified service, 65  
QWERTY keypad, 4, 6  
entering text, 16  
P
pacemaker, iv  
pairing, 46  
mobile equipment ID (MEID), 65  
R
mode  
phone  
rapid mode, 19  
recent calls, 41  
redialing, 12  
resetting phone, v  
resolution, 43, 54  
right option button, 11  
ringtone  
changing, 20  
accessories, 2, 65  
activating, 3  
build information, 57  
icons, 57  
keypads, 4  
lock, 55  
entering text, 17  
expert, 54  
Numbers only, 19  
rapid, 19  
text entry, 16  
multimedia message  
forwarding, 25  
options, 25  
making calls, 12  
number extension, 31  
overview, 2  
programming, 3  
resetting, v  
safety, iii  
turning on and off, 12  
business, 48  
contacts, 33, 34  
downloading, 39  
personal, 48  
type, 48  
receiving, 25  
replying, 25  
viewing, 25  
volume, 48  
multiple, 44  
multishot, 44  
S
picture  
My Account, 37  
my graphics, 40  
my pictures, 44  
my ringtones, 39  
my sounds, 40  
safety, iii  
contacts, 34  
multiple, 44  
picture message  
options, 25  
receiving, 25  
viewing, 25  
picture mode  
save as auto text, 23, 24, 26  
save message, 23, 26  
save to Outbox, 29  
scheduler, 58  
settings, 60  
N
screen saver, 50  
navigation key, 11  
70  
T
security  
emergency numbers, 55  
settings, 55  
send IM, 26  
recording, 58  
voice recognition, 63  
voice training, 53  
voice wake-up, 53  
voicemail, 14  
alert, 15  
T-coil hearing aid, 57  
text  
changing case, 17  
changing mode, 17, 20  
entering, 18  
Sender, 24  
settings  
normal alpha mode, 16  
number keypad, 19  
QWERTY keypad, 16  
rapid mode, 19  
text message  
Bluetooth, 47  
camera, 54  
display, 49  
volume  
adjusting, 14  
auto adjust, 48  
earpiece, 48  
key, 48  
ringtone, 48  
speakerphone, 48  
messages, 28  
messaging, 54  
scheduler, 60  
settings menu, 45  
shutter sound, 44, 54  
signature, 29  
smart sound. See smart volume  
smart volume, 48  
smiley  
forwarding, 23  
replying, 23  
retrieving, 23  
sender, 24  
sending, 22  
viewing, 23  
W
wallpaper, 50  
Web address  
contacts, 33  
white balance, 44  
word  
time pause, 31  
time/date formats, 51  
timer, 62  
tip calculator, 61  
Top-Up, 38  
TTY, 57  
turning on and off, 12  
entering, 17, 20  
sound  
entering, 16, 19  
controlling, 48  
flip closed, 49  
flip open, 49  
turning on or off, 49  
sounds  
keypad length, 49  
speakerphone, 13  
volume, 48  
speed dial, 14  
contacts, 32  
stopwatch, 62  
street address  
contacts, 33  
V
vehicle, iv  
viewfinder display, 54  
VirginXL, 36  
voice answer, 54  
voice commands, 63, 64  
voice dial  
adding, 53, 63  
changing, 63  
erasing, 53  
style  
menu, 50  
voice dial list, 63  
voice memo, 58  
playing, 58  
symbol  
entering, 16, 17, 20  
User Guide  
71  
Kyocera Wireless Corp.  
10300 Campus Point Drive  
San Diego, CA 92121 USA  
82-G1950-2EN, Rev. 001  

Motorola Cell Phone MC75 User Manual
LG Electronics LG Lifes Good Cell Phone 125 User Manual
LG Electronics B2050 User Manual
Iomega CLIK! 3868601 User Manual
iiView Cell Phone iVIEW 920TPC User Manual
Franke Consumer Products Coffeemaker 471086A1 User Manual
Emerson CKD9905 User Manual
Cuisinart DGB 625 User Manual
Country Home Products 10 HP User Manual
American Audio DCD PRO610 User Manual