CKD9905 O/M.QXD 5/29/03 1:38 PM Page 1
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:
Uninsulated Dangerous Voltage, that may be of sufficient
magnitude to constitute a risk of electric shock to persons is
present within this product’s enclosure.
ATTENTION:
The Owner’s Manual contains important operating and
maintenance instructions.
For your safety, it is necessary to refer to the manual.
DANGER:
Invisible and hazardous laser radiation when open and
interlock failed or defeated. Avoid direct exposure to beam.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
IMPORTANT SERVICE SAFETY INFORMATION
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
1
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 3
SAFETY PRECAUTIONS
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if
an unauthorized change or modification is made.
LASER SAFETY: This unit employs a laser. Only qualified service
personnel should attempt to service this device due to possible eye
injury.
CAUTION: USE OF CONTROLS,
ADJUSTMENTS OR
PERFORMANCE PROCEDURE HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
INFORMATION:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 4
LOCATION OF CONTROLS
FRONT
1
2 3 4 5
6
7
8 9 10 11
12 13
14 15 16 17 18 19 20
21 22 23 24
1. ALM.1 SET Button
2. ALM.2 SET Button
3. POWER/ALARM RESET
Button
12. CLOCK Button
13. SLEEP Indicator
14. AM LED Indicator
15. ALM.1 Indicator
4. POWER Indicator
16. FM STEREO Indicator
17. AM/FM Dial Scale and Pointer
18. SNOOZE Button
5
SLEEP Button
6. CD Compartment Door
7. CD Door OPEN/CLOSE Area
19. Display
8. STOP ( ) Button
20. ALM.2 Indicator
■
21. REPEAT Indicator
22. REPEAT Button
23. PROG (Program) Indicator
24. PROG (Program) Button
9. PLAY/PAUSE (
10. SKIP/Search/MINUTE (
Button
11. SKIP/Search/HOUR (
Button
) Button
)
)
4
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 5
LOCATION OF CONTROLS (CONTINUED)
RIGHT SIDE
1
2
3
4
LEFT SIDE
5
6
7
1. VOLUME Control
2. FUNCTION (FM/AM/CD) Switch
3. TUNING Control
4. Battery Compartment (Bottom of Unit)
5. WAKE (MUSIC/BUZZER) Switch
6. ALARM2 (OFF/ON) Switch
7. ALARM1 (OFF/ON) Switch
5
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 6
INSTALLATION
Unravel the AC cord and connect it to a
conveniently located AC outlet having
120V and 60Hz only. The Clock Display
will illuminate and “12:00” will appear in the
display.
NOTE: If the AC plug does not fit into a
nonpolarized outlet, do not file or cut the
wide blade.
If the AC cord is disconnected or if there is a power failure, this electronic clock is
designed to continue operating internally (without showing the time on the Clock
Display) with a 9 volt battery (not included). To install the battery, remove the
battery compartment cover and connect the battery to the terminals of the battery
snap inside the compartment (use of an alkaline battery is recommended) and
install the battery compartment cover back into place.
9V
Be sure to check the condition of the battery periodically by disconnecting the AC
cord and connecting it again two to three minutes later. The preset times should
continue operating. If the present time resets to “12:00”, it indicates the battery is
dead or not connected properly. A fresh 9 volt battery will keep the internal times
accurately for approximately 40 hours continuously. If you experience only the
normal brief interruptions of AC power, the battery can last much longer. It is
recommended to install a new battery every eight to 12 months.
6
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 7
OPERATION
LISTENING TO THE RADIO
1
2
1
2
1
2
Press the POWER/ALARM RESET
button ■ to turn the unit on (the
POWER indicator will light). Slide the
FUNCTION switch ■ to the desired
band (FM or AM).
Tune a station by turning the TUNING
control . When a strong FM stereo
signal is received while listening to FM,
the FM STEREO indicator will light.
■
Adjust the VOLUME control
■
as
desired.
Hints for Better Reception
FM - The FM antenna is built into the AC cord. Fully unravel AC cord for best
reception. You may have to vary the direction of the AC cord to find the strongest
signal for each FM station.
AM - The AM ferrite bar antenna is located inside the cabinet. It may be
necessary to turn the unit slightly so that the internal antenna is pointing in the
direction of the AM transmitter. You may have to experiment to find the position
that provides the strongest reception for each of your favorite AM stations.
7
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 8
OPERATION (CONTINUED)
PLAYING COMPACT DISCS - NORMAL PLAYBACK
Remove the paper card from the CD Compartment before inserting a CD.
1
2
1
2
Press the POWER/ALARM RESET Press the CD Door OPEN/CLOSE area
button ■ to turn the unit on (the of the CD compartment door and place a
CD on the center spindle, with the
printed label side facing up. Close the
CD compartment door; the total number
of tracks will briefly appear in the Display.
POWER indicator will light). Slide the
FUNCTION switch ■ to the CD
position.
3
1
4
2
When the disc is through playing, it will
stop. Press the STOP (■) button to
stop the disc before it is finished.
Press the PLAY/PAUSE
to start playback.
Adjust the VOLUME control ■ as
) button
■
(
desired.
NOTES:
• This unit is capable of playing standard CDs or 3” singles; no adapter is
required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “no” will
appear in the display.
• To remove the disc, press the CD Door OPEN/CLOSE area on the CD
Compartment door, hold the edge of the CD and lift it out.
• The maximum time of a CD is 74 minutes for this unit.
8
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 9
OPERATION (CONTINUED)
CD PAUSE CONTROL
1
2
During CD playback, if you wish to
pause the disc momentarily, press the
Press the PLAY/PAUSE
) button
(
again to release Pause and resume
normal CD playback. The sound
returns and the track number appears
for a few seconds in the Display.
PLAY/PAUSE
) button again.
(
Playback stops but the disc continues
to spin and the track number flashes
in the Display for a few seconds.
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
2
1
After you insert the disc into the CD
player and the total number of tracks
appear on the display, you may press
When the desired track number
appears in the display, press the
PLAY/PAUSE
) button. Playback
(
either the SKIP/Search/HOUR (
)
will begin on the track you selected.
■ or SKIP/Search/MINUTE (
) ■
button to select a specific track for
playback.
9
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 10
OPERATION (CONTINUED)
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH
1
2
During
playback,
press
the
During
playback,
press
the
SKIP/Search/HOUR (
) button
SKIP/Search/MINUTE (
) button
once to advance the player to the
beginning of the next track. Press the
once to move the player back to the
beginning of the currently playing
track. Press the SKIP/Search/MINUTE
SKIP/Search/HOUR (
) button
repeatedly to advance the player to
higher numbered tracks.
(
) button repeatedly to move the
player back to lower numbered tracks.
3
2
1
During playback, depress and hold
either the SKIP/Search/HOUR (
)
■ or SKIP/Search/MINUTE (
) ■
button to move the player forward or
backward within a track to locate a
specific musical passage. The player
will move forward or backward at high
speed as long as the buttons are
depressed. When you release the
SKIP/Search/HOUR (
SKIP/Search/MINUTE (
) ■ or
) ■ button,
normal playback will resume at that
point.
10
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 11
OPERATION (CONTINUED)
REPEAT PLAYBACK
2
1
2
2
1
To repeat a single track, press the To repeat all of the tracks on a disc
REPEAT button ■ once. The Repeat continuously, press the REPEAT button
■ twice. The Repeat indicator will light.
indicator will blink. Press the
SKIP/Search/HOUR ( ) ■ or
MINUTE ( ) button ■ to select the
specific track that you wish to repeat.
When the desired track number
appears in the display, press the
Press the PLAY/PAUSE ) button
■
(
to begin playback. All tracks on the disc
will be repeated continuously.
PLAY/PAUSE
) button ■ to begin
(
playback. The specific track you
selected will be repeated continuously.
3
3
2
1
To cancel Repeat Playback, press the
REPEAT button ■ until the Repeat
indicator is not lit. You can also cancel
Repeat Playback by pressing the CD
STOP (■) button ■ or by pressing the
POWER/ALARM RESET button ■ to
turn the unit off.
11
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 12
OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be played.
2
1
3
1
Press the PROG button ■, “P 01” will
appear in the display and the PROG
indicator will blink. Within eight seconds,
Turn the unit on and slide the
FUNCTION switch to the CD position.
press the SKIP/Search/HOUR
■ or
MINUTE button ■ to select the
desired track to program.
4
3
2
1
2
1
3
Press the PROG button ■ to To skip forward or backward through
the programs, press the SKIP/
memorize the track. Repeat steps 2
and 3 to program additional tracks up
to a maximum of 20 tracks. Press the
Search/HOUR (
Search/MINUTE (
) ■ or SKIP/
) ■ button. When
PLAY/PAUSE
) button ■ to begin
(
the disc is through playing, it will stop.
program playback and adjust the
VOLUME control ■ as desired.
NOTES:
•
Press the REPEAT button twice during program playback to repeat the
program repeatedly until the STOP (■) button is pressed.
Press the STOP (■) button to stop the disc before it is finished.
To cancel program playback, while in stop mode, press the PROG button
until the PROG indicator blinks, then press the STOP (■) button.
Each track may be stored in the program memory as many times as desired
(up to 20 tracks).
•
•
•
12
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 13
OPERATION (CONTINUED)
TO SET OR RESET THE ACTUAL TIME
1
2
2
3
1
Press and hold the CLOCK button and While holding the CLOCK button ■,
the time will blink in the Display.
press the SKIP/Search/MINUTE
button ■ to advance the minute and
the SKIP/Search/HOUR
button ■
to advance the hour until the desired
time is shown on the display.
AM (TIME) LED INDICATOR
In the upper left corner of the Display is the AM LED indicator. When the AM LED
indicator is lit, the actual or alarm time shown in the Display is AM hours. When
the indicator is not lit, the time shown is PM hours.
TO SET OR RESET THE ALARM TIME(S)
1
2
2
1
1
3
Press and hold the desired ALM SET
button (ALM.1 or ALM.2) and the
selected alarm time will blink in the
Display.
While holding the desired ALM SET
button button ■, press the
SKIP/Search/ MINUTE
to advance the minute and the
SKIP/Search/HOUR button ■ to
button ■
advance the hour until the desired
alarm time is shown on the display.
13
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 14
OPERATION (CONTINUED)
TO SET THE ALARM TO WAKE TO RADIO
1
2
2
1
Set the alarm time as previously Turn the unit off and slide the WAKE
instructed. Turn the unit on and slide switch to the MUSIC position. When
the FUNCTION switch ■ to the FM the actual time matches the selected
preset alarm time(s), the unit
automatically turns on.
To shut off the alarm, see TO SHUT
THE ALARM OFF section on the
following page.
ST. or AM position. Select a radio
station and make sure the VOLUME ■
is set as desired. Slide the desired
ALARM switch (ALARM1 or
ALARM2), located at the left side of
the unit to the ON position.
TO SET THE ALARM TO WAKE TO CD
1
2
2
1
Set the alarm time as previously Turn the unit off and slide the WAKE
instructed. Insert a CD into the CD switch to the MUSIC position. When
player, turn the unit on and slide the the actual time matches the selected
FUNCTION switch ■ to the CD preset alarm time(s), the unit
automatically turns on and the CD
position. Make sure the VOLUME ■ is
begins to play.
set as desired. Slide the desired
To shut off the alarm, see TO SHUT
THE ALARM OFF section on the
following page.
ALARM switch
ALARM2), located at the left side of
the unit to the ON position.
(ALARM1 or
14
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 15
OPERATION (CONTINUED)
TO SET THE ALARM TO WAKE TO BUZZER
1
2
Set the alarm time as previously
Slide the WAKE switch to the BUZZER
instructed. Slide the desired ALARM position. When the actual time matches
the selected preset alarm time(s), the
unit automatically turns on. To shut off
the alarm, see TO SHUT THE ALARM
OFF section below.
switch (ALARM1 or ALARM2) to the
ON position.
TO SHUT THE ALARM OFF
To shut the alarm off, press the
POWER/ALARM RESET button ■
once and the alarm time will be reset
for the next day. Slide the desired
ALARM switch ■ to the OFF position
to turn off the alarm and not set it for
the next day.
1
2
1
SNOOZE
The alarm can be temporarily turned
off manually by pressing the
SNOOZE button; the alarm will turn
back on automatically six minutes
later.
1
15
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 16
OPERATION (CONTINUED)
TO ACTIVATE THE SLEEP FUNCTION
1
2
Tune the desired radio station or insert Press the SLEEP button twice, “90”
a CD as previously instructed.
will appear on the display and the
SLEEP indicator will light indicating
the unit will play for 90 minutes and
then shut off.
Press the SLEEP button repeatedly to
decrease the playing time to 60 or 30
minutes respectively. To cancel sleep
time, press the SLEEP button
repeatedly until “- -” appears on the
display.
3
16
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 17
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the
compact disc only by its edges. Never allow
your fingers to come in contact with the shiny,
unprinted side of the compact disc.
•
•
Do not attach adhesive tape, stickers, etc.
to the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the compact disc. If necessary, use a
CD cleaning kit.
•
•
If a disc skips or gets stuck on a section of the compact disc, it is probably dirty
or damaged (scratched).
When cleaning the compact disc, wipe in straight lines from the center of the
compact disc to the outer edge of the compact disc. Never wipe in circular
motions.
Z
•
This unit is designed to play only compact discs bearing the
identification logo as shown here. Other compact discs may not
conform to the CD standard and may not play properly.
Compact Discs should be stored in their cases after each use to avoid
damage.
Do not expose compact discs to direct sunlight, high humidity, high
temperatures, or dust, etc. Prolonged exposure or extreme temperatures can
warp the compact disc.
•
•
•
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink may damage the surface.
Cleaning the unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power
source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
17
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 18
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
Unit will not
CAUSE
AC cord not
plugged in.
SOLUTION
Plug in the AC cord.
turn on.
Disc will not play.
CD compartment
not closed.
Close CD compartment
door.
Disc inserted
incorrectly.
Reinsert disc correctly.
Dirty or defective CD. Try another disc.
CD: No sound.
VOLUME control
set to minimum.
Defective disc.
Dirty or defective
disc.
Increase volume.
Try another disc.
Erratic playback.
Clean or replace disc.
Display has reverted Battery connected
Check the battery.
to “12:00” after a
power failure.
improperly, not con-
nected or dead.
Clock not set.
Set the clock.
Alarm does not
turn on.
ALARM switch not
set to ON position.
Clock is not set.
Alarm time not set.
Set desired ALARM switch
to the ON position.
Set the clock.
Set alarm time.
AM or FM, no sound. Power is not on.
Press the POWER/ALARM
RESET button to turn the
unit on.
VOLUME control
set to minimum.
Increase volume.
18
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 19
CARE AND MAINTENANCE
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet
becomes smudged or dirty, clean it with a soft, slightly dampened cloth.
Never allow water or any liquid to get inside the cabinet. Never use any
abrasive cleaners or cleaning pads as these will damage the finish of
your radio.
19
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 20
EMERSON RADIO CORP.
LIMITED WARRANTY
Emerson Radio Corp. warrants manufacturing defects in original
material, including original parts and workmanship, under normal use
and conditions, for a period of ninety (90) days from the date of original
purchase in the U.S. With your dated proof of purchase, we will provide
repair service at no charge for labor and parts at an authorized Depot
Repair Facility, or replace the product in our discretion. For repair or
replacement, pack your unit in a padded box, enclose your check or
money order payable to Emerson Radio Corp. in the amount of $9.00
(not required by California residents) to cover shipping and handling
costs, and enclose a copy of your proof of purchase. Send your unit to:
Emerson Radio Corp.
1901 Diplomat Drive
Farmers Branch, TX 75234
This warranty does not cover damage from negligence, misuse, abuse,
accident, failure to follow operating instructions, commercial use, rental,
repairs by an unauthorized facility, or products purchased, used,
serviced or damaged outside of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE.
AU898M
20
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 21
®
EMERSON
PART NO.: 16-2892
303-01
Printed in China
CKD9905 O/M.QXD 5/29/03 1:38 PM Page 22
®
AM/FM STEREO CLOCK
RADIO COMPACT DISC
PLAYER
OWNER’S MANUAL
CKD9905
|