Intel Oem 80gb 530 M2 SSDSCKGW080A401 User Manual

Intel® Solid-State Drive 530 Series (M.2)  
Intel® Solid-State Drive 530 Series (M.2)  
Product Specification  
Capacities: 80 GB, 120 GB, 180 GB, 360 GB  
Power Management  
3.3 V SATA Supply Rail  
SATA Link Power Management (LPM)  
Device Sleep (DevSleep)  
Components:  
Intel® 20 nm NAND Flash Memory  
Multi-Level Cell (MLC)  
Power  
Form Factors: M.2 80 mm (single- and double-  
sided)  
Active (BAPCo MobileMark* 2007  
Workload): 140 mW  
2280-S2-B-M (80 GB and 180 GB)  
2280-D2-B-M (120 GB and 360 GB)  
Idle3: 55 mW  
DevSleep: 200 µW  
Thickness: up to 3.58 mm  
Temperature  
Weight: < 10 grams  
Operating4: 0o C to 70o C  
Non-Operating: -55o C to 95o C  
SATA 6 Gb/s Bandwidth Performance1  
(Iometer* Queue Depth 32)  
Reliability  
Sustained Sequential Read: up to 540 MB/s  
Sustained Sequential Write: up to 490  
MB/s  
— Uncorrectable Bit Error Rate (UBER):  
<1 sector per 1016 bits read  
Read and Write IOPS1  
— Mean Time Between Failure (MTBF):  
1,200,000 hours  
(Iometer Queue Depth 32)  
— Shock (operating and non-operating):  
1,000 G/0.5 msec  
Random 4 KB Reads: up to 41,000 IOPS  
Random 4 KB Writes: up to 80,000 IOPS2  
Vibration  
Data Compression  
— Operating: 2.17 GRMS (5-700 Hz)  
— Non-operating: 3.13 GRMS (5-800 Hz)  
Certifications and Declarations:  
AES 256-bit Encryption  
End-to-End Data Protection  
Compatibility  
UL*  
CE*  
C-Tick*  
BSMI*  
KCC*  
Microsoft* WHCK  
VCCI*  
SATA-IO*  
Intel® SSD Toolbox with Intel® SSD  
Optimizer  
Intel® Data Migration Software  
Intel® Rapid Storage Technology  
SATA Revision 3.0  
ACS-2 (ATA/ATAPI Command Set 2)  
SSD Enhanced SMART ATA feature set  
Product Ecological Compliance  
RoHS*  
NOTES:  
1.  
2.  
3.  
4.  
Performance values vary by capacity.  
Random 4 KB writes measured using out-of-box SSD.  
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.  
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the  
system for maintaining proper device operating temperatures on heavier workloads.  
September 2013  
Order Number: 329213-002US  
Product Specification  
1
Intel® Solid-State Drive 530 Series (M.2)  
Contents  
September 2013  
Order Number: 329213-002US  
Product Specification  
3
Intel® Solid-State Drive 530 Series (M.2)  
Revision History  
Document  
Number  
Revision  
Number  
Description  
Revision Date  
329213  
329213  
001US  
002US  
Initial release  
July 2013  
Added 120GB capacity  
September 2013  
Product Specification  
4
September 2013  
Order Number: 329213-002US  
 
Intel® Solid-State Drive 530 Series (M.2)  
1 Introduction  
This document describes the specifications and capabilities of the Intel® Solid-State Drive 530 Series  
(Intel® SSD 530 Series).  
The Intel® SSD 530 Series is a case-less, M.2, next generation storage solution designed for  
Ultrabook™. The new M.2 form factor allows ultra-compact solutions which deliver leading  
performance for Serial Advanced Technology Attachment (SATA)-based computers in capacities  
ranging up to 360 GB.  
The latest feature addition is the DevSleep functionality, a low power drive state controlled by the host  
via the DevSleep pin. The drive will consume a mere 200 µW while in this state.  
As compared to standard SATA HDDs, Intel SSD 530 Series offers these key features:  
High I/O and throughput performance  
Low power consumption  
Increased system responsiveness  
High reliability  
Enhanced ruggedness  
Small form-factor  
Minimum weight  
The Intel SSD 530 Series also offers additional key features such as:  
Advanced Encryption Standard (AES) 256-bit Encryption  
AES 256-bit encryption is an industry standard in data security, providing a hardware-based  
mechanism for encryption and decryption of user data. Utilizing a 256-bit encryption key, AES  
encryption—when combined with an ATA drive password—helps protect user data.  
End-to-End Data Protection  
End-to-end data protection helps protect data from being corrupted across the data path by using  
cyclic redundancy check (CRC), parity, and error correction code (ECC) checks in the data path from  
the host interface to the NAND, and back.  
Data Compression  
Data compression helps improve performance and endurance by automatically compressing  
information sent to the SSD so that less data has to be processed and stored on the NAND. The  
amount of data that can be compressed depends on the type of data.  
September 2013  
Order Number: 329213-002US  
Product Specification  
5
   
Intel® Solid-State Drive 530 Series (M.2)  
1.1  
Terminology  
Table 1: Terminology  
Term  
Description  
ATA  
Advanced Technology Attachment  
Device Activity Signal  
DAS  
DevSleep  
DIPM  
DMA  
Device Sleep, a new addition to the SATA specification  
Device Initiated Power Management  
Direct Memory Access  
EXT  
Extended  
FPDMA  
First Party Direct Memory Access  
Gigabyte (1,000,000,000 bytes)  
Note: The total usable capacity of the SSD may be less than the total physical  
capacity because a small portion of the capacity is used for NAND flash  
management and maintenance purposes.  
GB  
HDD  
HIPM  
I/O  
Hard Disk Drive  
Host Initiated Power Management  
Input/Output  
IOPS  
KB  
Input/Output Operations Per Second  
Kilobyte (1,024 bytes)  
LBA  
Logical Block Address  
LPM  
Link Power Management  
Megabyte (1,000,000 bytes)  
Multi-level Cell  
MB  
MLC  
MTBF  
NCQ  
NOP  
PIO  
Mean Time Between Failures  
Native Command Queuing  
No Operation  
Programmed Input/Output  
Reliability Demonstration Test  
Root Mean Squared  
RDT  
RMS  
SATA  
SMART  
SSD  
TYP  
Serial Advanced Technology Attachment  
Self-Monitoring, Analysis and Reporting Technology  
Solid-State Drive  
Typical  
UBER  
Uncorrectable Bit Error Rate  
Product Specification  
6
September 2013  
Order Number: 329213-002US  
Intel® Solid-State Drive 530 Series (M.2)  
1.2  
Reference Documents  
Table 2: Standard References  
Date or Rev. #  
Title  
Location  
IEC 55022 Information Technology Equipment —  
Radio disturbance Characteristics— Limits and  
methods of measurement CISPR22:2008  
(Modified)  
Sept 2008  
Dec 2008  
June 2009  
VCCI  
Click Search MDDS Database and search  
for material description datasheet  
RoHS  
June 2009  
Serial ATA Revision 3.0  
ACS-2- Specification  
August 2009  
IEC 55024 Information Technology Equipment —  
Immunity characteristics— Limits and methods of  
measurement CISPR24:2010  
August 2010  
Solid-State Drive (SSD) Requirements and  
Endurance Test Method (JESD218)  
documents/docs/jesd218/  
Sept 2010  
Oct 2010  
TPR053v11_SATA31_M.2_Card_Format_for_SSDs  
September 2013  
Order Number: 329213-002US  
Product Specification  
7
 
Intel® Solid-State Drive 530 Series (M.2)  
2 Product Specifications  
2.1  
Capacity  
Table 3: User Addressable Sectors  
Intel® SSD 530 Series  
Unformatted Capacity (Total User Addressable Sectors in LBA mode)  
80 GB  
156,301,488  
234,441,648  
351,651,888  
703,282,608  
120 GB  
180 GB  
360 GB  
2.2  
Performance  
Table 4: Compressible Performance  
Specification  
Unit  
Intel® SSD 530 Series  
80 GB  
120 GB  
180 GB  
360 GB  
Random 4 KB Read (up to)1  
Random 4 KB Write (up to)2  
Random 4 KB Write (TYP) 1  
Sequential 128 KB Read  
(SATA 6 Gb/s)1  
IOPS  
IOPS  
IOPS  
24,000  
80,000  
33,000  
24,000  
80,000  
37,500  
41,000  
80,000  
49,000  
41,000  
37,000  
29,500  
MB/s  
MB/s  
540  
480  
540  
480  
540  
490  
540  
490  
Sequential 128 KB Write  
(SATA 6 Gb/s)1  
Note:  
1.  
Performance measured using Iometer* with Queue Depth 32. Measurements are performed on 8 GB of  
Logical Block Address (LBA) range on a full SSD  
2.  
Random 4 KB writes measured using out-of-box SSD.  
Table 5: Incompressible Performance  
Specification  
Unit  
Intel® SSD 530 Series  
80 GB  
120 GB  
180 GB  
360 GB  
Random 4 KB Read (up to)1  
Random 4 KB Write (up to) 1  
Sequential 128 KB Read  
(SATA 6 Gb/s)1  
Sequential 128 KB Write  
(SATA 6 Gb/s)1  
IOPS  
IOPS  
20,500  
9,200  
18,000  
15,000  
37,500  
17,000  
37,500  
10,000  
MB/s  
MB/s  
430  
100  
450  
130  
470  
170  
525  
240  
Note:  
Product Specification  
8
September 2013  
Order Number: 329213-002US  
     
Intel® Solid-State Drive 530 Series (M.2)  
1. Performance measured using Iometer* with Queue Depth 32  
Table 6: Latency  
Specification  
Intel® SSD 530 Series  
120 GB 180 GB  
80 GB  
360 GB  
Read1  
80 µs (TYP)  
85 µs (TYP)  
1 s (TYP)  
Write1  
Power On To Ready2  
Note:  
1.  
2.  
Based on sequential 4 KB using Iometer with Queue Depth 1 workload with compressible (non-random)  
data pattern. Write Cache enabled.  
Power On To Ready time assumes proper shutdown  
2.3  
Electrical Characteristics  
Table 7: Operating Voltage and Power Consumption  
Electrical Characteristics  
Value  
80 GB  
120 GB  
180 GB  
360 GB  
Operating Voltage for 3.3 V (±5%)  
Min  
Max  
3.14 V  
3.47 V  
Rise Time (Max/Min)  
Fall Time (Max/Min)  
Noise Tolerance  
Min Off Time1  
Power Consumption (TYP)  
Active2  
100 ms / 0.1 ms  
5 s / 1 ms  
50 mV pp (10 Hz – 30 MHz)  
1 s  
140 mW  
55 mW  
200 µW  
Idle3  
DevSleep4  
Thermal Power5  
2.7 W  
3 W  
3.1 W  
3.4 W  
3.8 W  
4.1 W  
4.5 W  
5.5 W  
Regulator Power6  
Note:  
1.  
Minimum time from when power removed from drive (Vcc < 100 mV) to when power can be reapplied to  
drive.  
2.  
Active power measured during execution of MobileMark* 2007 with SATA Link Power Management (LPM)  
enabled.  
3.  
4.  
5.  
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.  
Power consumption during DevSleep state.  
Power measured during 128 KB sequential writes with Queue Depth 32 workload using 100 ms sample  
period. This represents power that would be thermal load on system during heavy workloads.  
Power measured during 128 KB sequential writes with Queue Depth 32 workload using 500 µs sample  
period. This represents power that system power supply would have to regulate for proper device  
operation.  
6.  
September 2013  
Order Number: 329213-002US  
Product Specification  
9
   
Intel® Solid-State Drive 530 Series (M.2)  
2.4  
Environmental Conditions  
2.4.1  
Temperature, Shock, Vibration  
Table 8: Temperature, Shock, Vibration  
Electrical Characteristics  
Range  
Module Temperature  
Operating1  
0º C - 70º C  
-55º C - 95º C  
Non-operating2  
Temperature Gradient3  
Operating  
30 (TYP) ºC/hr  
30 (TYP) ºC/hr  
Non-operating  
Humidity  
Operating  
5 – 95 %  
5 – 95 %  
Non-operating  
Shock and Vibration  
Shock4  
Range  
Operating  
Non-operating  
Vibration5  
1,000 G (Max) at 0.5 msec  
1,000 G (Max) at 0.5 msec  
Operating  
Non-operating  
2.17 GRMS (5-700 Hz) Max  
3.13 GRMS (5-800 Hz) Max  
Note:  
1.  
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the  
system for maintaining proper device operating temperature on heavier workloads.  
Please contact your Intel representative for details on the non-operating temperature range.  
Temperature gradient measured without condensation.  
Shock specifications assume the SSD is mounted securely with the input vibration applied to the drive-  
mounting screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using  
peak acceleration and pulse width value.  
2.  
3.  
4.  
5.  
Vibration specifications assume the SSD is mounted securely with the input vibration applied to the  
drive-mounting screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is  
measured using Root Mean Squared (RMS) value.  
2.4.2  
Altitude  
The drive is not sensitive to changes in atmospheric pressure because it has no moving parts. Drive  
tested under non-operational conditions to pressures representative of -1 K and +40 K feet.  
Product Specification  
10  
September 2013  
Order Number: 329213-002US  
   
Intel® Solid-State Drive 530 Series (M.2)  
2.5  
Product Regulatory Compliance  
The Intel® SSD 530 Series meets or exceeds the regulatory or certification requirements in the table  
below.  
Table 9: Product Regulatory Compliance Specifications  
Title  
Description  
Region For Which  
Conformity  
Declared  
TITLE 47-Telecommunications CHAPTER  
1— FEDERAL COMMUNMICATIONS  
COMMISSION PART 15 — RADIO  
FREQUENCY DEVICES  
FCC Part 15B Class B  
USA  
CA/CSA-CEI/IEC CISPR 22-10 (Ref.  
CISPR 22:2008).  
ICES-003, Issue 4 Interference-Causing  
Equipment  
Standard Digital Apparatus  
Canada  
IEC 55024 Information Technology  
Equipment — Immunity characteristics—  
Limits and methods of measurement  
CISPR24:2010  
EN-55024: 2010 and its amendments  
EN-55022: 2010 and its amendments  
European Union  
European Union  
IEC 55022 Information Technology  
Equipment — Radio disturbance  
Characteristics— Limits and methods of  
measurement CISPR24:2008 (Modified)  
Information Technology Equipment —  
Safety — Part 1: General Requirements  
EN-60950-1 2nd Edition  
USA/Canada  
USA/Canada  
Information Technology Equipment —  
Safety — Part 1: General Requirements  
UL/CSA EN-60950-1 2nd Edition  
September 2013  
Order Number: 329213-002US  
Product Specification  
11  
 
Intel® Solid-State Drive 530 Series (M.2)  
2.6  
Reliability  
The Intel® SSD 530 Series meets or exceeds SSD endurance and data retention requirements as  
specified in the JESD218 specification.  
Table 10: Reliability Specifications  
Parameter  
Value  
Uncorrectable Bit Error Rate (UBER)  
Uncorrectable bit error rate will not exceed one sector in the specified  
number of bits read. In the unlikely event of a non-recoverable read error,  
the SSD will report it as a read failure to the host; the sector in error is  
considered corrupt and is not returned to the host.  
< 1 sector per 1016 bits read  
Mean Time Between Failures (MTBF)  
Mean Time Between Failures is estimated based on Telcordia*  
methodology and demonstrated through Reliability Demonstration Test  
(RDT).  
≥ 1.2 million hours  
Minimum Useful Life/Endurance Rating  
5 years  
The SSD will have a minimum useful life based on a typical client workload  
assuming up to 20 GB of host writes per day.  
Insertion Cycles  
250 insertion/removal cycles  
Maximum insertion/removal cycles on M.2 port  
Product Specification  
12  
September 2013  
Order Number: 329213-002US  
 
Intel® Solid-State Drive 530 Series (M.2)  
3 Mechanical Information  
The Intel® SSD 530 Series meets the proposed specification for 80mm M.2 form factor  
The figure below shows the physical package information for the 80 mm height, M.2 Intel® SSD 530  
Series SSD. All dimensions are in millimeters.  
Figure 1: Dimensions for 80 mm double-sided M.2 Form Factor (2280-D2-B-M) 120 GB and  
360 GB  
September 2013  
Order Number: 329213-002US  
Product Specification  
13  
 
Intel® Solid-State Drive 530 Series (M.2)  
Figure 2: Dimensions for 80 mm single-sided M.2 Form Factor (2280-S2-B-M) 80 GB and  
180 GB  
Product Specification  
14  
September 2013  
Order Number: 329213-002US  
Intel® Solid-State Drive 530 Series (M.2)  
4 Pin and Signal Descriptions  
4.1  
Pin Locations  
Figure 3: Layout of Signal and Power Segment Pins  
September 2013  
Order Number: 329213-002US  
Product Specification  
15  
   
Intel® Solid-State Drive 530 Series (M.2)  
4.2  
Signal Descriptions  
Table 11: M.2 Serial ATA Power Pin Definitions  
Pin Function  
CONFIG_3  
Definition  
P1  
P2  
P3  
P4  
P5  
P6  
P7  
P8  
P9  
Ground  
+3.3 V  
GND  
3.3 V Source  
Ground  
+3.3 V  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
DAS/DSS#  
Reserved  
Notch  
Notch  
Notch  
Notch  
Notch  
3.3 V Source  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
Device Activity Signal / Disable Staggered Spin-up  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
Ground  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
Ground  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
Ground  
No Connect  
No Connect  
No Connect  
No Connect  
P10  
P11  
P12  
P13  
P14  
P15  
P16  
P17  
P18  
P19  
P20  
P21  
P22  
P23  
P24  
P25  
P26  
P27  
P28  
P29  
P30  
P31  
P32  
P33  
P34  
P35  
P36  
P37  
P38  
P39  
P40  
P41  
P42  
P43  
P44  
P45  
P46  
P47  
Notch  
Notch  
Notch  
Reserved  
CONFIG_0  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
GND  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
GND  
Reserved  
Reserved  
Reserved  
Reserved  
DEVSLP  
GND  
DevSleep Pin  
Ground  
No Connect  
Reserved  
+B  
Reserved  
-B  
Reserved  
GND  
Reserved  
-A  
Host Receiver Differential Signal Pair (This is an output of the SSD)  
No Connect  
Host Receiver Differential Signal Pair (This is an output of the SSD)  
No Connect  
Ground  
No Connect  
Host Transmitter Differential Signal Pair (This is an input of the SSD)  
Product Specification  
16  
September 2013  
Order Number: 329213-002US  
 
Intel® Solid-State Drive 530 Series (M.2)  
Pin  
P48  
Function  
Reserved  
Definition  
No Connect  
P49  
P50  
P51  
P52  
P53  
P54  
P55  
P56  
P57  
P58  
P59  
P60  
P61  
P62  
P63  
P64  
P65  
P66  
P67  
P68  
P69  
P70  
P71  
P72  
P73  
P74  
P75  
+A  
Reserved  
GND  
Reserved  
Reserved  
Reserved  
Reserved  
Two Wire Interface  
GND  
Two Wire Interface  
Notch  
Notch  
Notch  
Notch  
Notch  
Notch  
Notch  
Notch  
Reserved  
Reserved  
CONFIG_1  
+3.3 V  
GND  
+3.3 V  
Host Transmitter Differential Signal Pair (This is an input of the SSD)  
No Connect  
Ground  
No Connect  
No Connect  
No Connect  
No Connect  
Two Wire Interface Clock  
Ground  
Two Wire Interface Data  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
No Connect  
Ground  
3.3 V Source  
Ground  
3.3 V Source  
Ground  
3.3 V Source  
Ground  
GND  
+3.3 V  
CONFIG_2  
4.3  
Device Sleep Feature  
Device Sleep (or DevSleep/DEVSLP) is the latest feature aligned with Intel® 4th Generation Core™-  
based Ultrabooks™. Ultrabook™ has stringent power requirements for SSDs and as such requires an  
ability to put the drive in a low power state. Although Link Power Management allows some control  
over power consumption, both methods still require the SATA link to remain online. The DevSleep pin  
is an enable high pin.  
September 2013  
Order Number: 329213-002US  
Product Specification  
17  
 
Intel® Solid-State Drive 530 Series (M.2)  
5 Supported Command Sets  
The Intel SSD 530 Series supports all mandatory Advanced Technology Attachment (ATA) and Serial  
ATA (SATA) commands defined in the ACS-2 and SATA Revision 3.0 specifications. The mandatory and  
optional commands are defined in this section.  
5.1  
ATA General Feature Command Set  
General Feature command set (non-PACKET), which consists of:  
EXECUTE DEVICE DIAGNOSTIC  
FLUSH CACHE  
IDENTIFY DEVICE  
1
READ DMA  
READ SECTOR(S)  
READ VERIFY SECTOR(S)  
SEEK  
SET FEATURES  
WRITE DMA  
WRITE SECTOR(S)  
READ MULTIPLE  
SET MULTIPLE MODE  
WRITE MULTIPLE  
The Intel SSD 530 Series also supports the following optional commands:  
READ BUFFFER  
WRITE BUFFER  
NOP  
DOWNLOAD MICROCODE  
Note:  
1.  
See the Appendix for details on the sector data returned after issuing an IDENTIFY DEVICE command.  
Product Specification  
18  
September 2013  
Order Number: 329213-002US  
   
Intel® Solid-State Drive 530 Series (M.2)  
5.2  
Power Management  
The Intel SSD 530 Series supports several power management feature sets as defined by the ATA  
specification: general Power Management feature set, Advanced Power Management feature set, and  
Power-Up in Standby (PUIS) feature set.  
The Advanced Power Management and PUIS features can be enabled or disabled using the SET  
FEATURES command.  
The Power Management feature set includes the following commands:  
CHECK POWER MODE  
IDLE  
IDLE IMMEDIATE  
SLEEP  
STANDBY  
STANDBY IMMEDIATE  
5.3  
Security Mode Feature Set  
The Intel SSD 530 Series supports the ATA Security Feature Set, which consists of:  
SECURITY SET PASSWORD  
SECURITY UNLOCK  
SECURITY ERASE PREPARE  
SECURITY ERASE UNIT  
Normal Mode – Full NAND erase of user available space and spare area  
Enhanced Mode – Cryptographically erase data  
SECURITY FREEZE LOCK  
SECURITY DISABLE PASSWORD  
September 2013  
Order Number: 329213-002US  
Product Specification  
19  
     
Intel® Solid-State Drive 530 Series (M.2)  
5.4  
SMART Command Set  
The Intel SSD 530 Series supports the SMART command set, which consists of:  
SMART READ DATA  
SMART READ ATTRIBUTE THRESHOLDS  
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE  
SMART SAVE ATTRIBUTE VALUES  
SMART EXECUTE OFF-LINE IMMEDIATE  
SMART READ LOG SECTOR  
SMART WRITE LOG SECTOR  
SMART ENABLE OPERATIONS  
SMART DISABLE OPERATIONS  
SMART RETURN STATUS  
5.4.1  
SMART Attributes  
Table 12 lists the SMART attributes supported by the Intel SSD 530 Series; Table 13 lists the  
corresponding status flags and threshold settings.  
Table 12: SMART Attributes  
ID  
Attribute  
Status Flags  
Threshold  
SP  
EC  
ER  
PE  
OC  
PW  
Re-allocated Sector Count  
The raw value of this attribute shows the  
number of retired blocks since leaving the  
factory (grown defect count).  
05h  
1
1
0
0
1
0
0 (none)  
Power-On Hours Count  
The raw value reports two values: the first  
4 bytes report the cumulative number of  
power-on hours over the life of the device,  
the remaining bytes report the number of  
milliseconds since the last hour increment.  
The On/Off status of the Device Initiated  
Power Management (DIPM) feature will  
affect the number of hours reported. If DIPM  
is turned On, the recorded value for  
power-on hours does not include the time  
that the device is in a "slumber" state. If  
DIPM is turned Off, the recorded value for  
power-on hours should match the clock  
time, as all three device states are counted:  
active, idle and slumber.  
09h  
1
1
0
0
1
0
0 (none)  
Power Cycle Count  
The raw value of this attribute reports the  
cumulative number of power cycle events  
over the life of the device.  
0Ch  
1
1
0
0
1
0
0 (none)  
Product Specification  
20  
September 2013  
Order Number: 329213-002US  
 
Intel® Solid-State Drive 530 Series (M.2)  
ID  
Attribute  
Status Flags  
Threshold  
SP  
EC  
ER  
PE  
OC  
PW  
AAh  
ABh  
1
1
0
0
1
1
10  
Available Reserved Space  
Program Fail Count  
The raw value of this attribute shows total  
count of program fails and the normalized  
value, beginning at 100, shows the percent  
remaining of allowable program fails.  
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)  
Erase Fail Count  
The raw value of this attribute shows total  
count of erase fails and the normalized  
value, beginning at 100, shows the percent  
remaining of allowable erase fails.  
ACh  
0 (none)  
Unexpected Power Loss  
The raw value of this attribute reports the  
cumulative number of unsafe (unclean)  
shutdown events over the life of the device.  
An unsafe shutdown occurs whenever the  
device is powered off without STANDBY  
IMMEDIATE being the last command  
AEh  
B7h  
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)  
0 (none)  
SATA Downshift Count  
The count of the number of times SATA  
interface selected lower signaling rate due  
to error.  
End-to-End Error Detection Count  
Reports number of errors encountered  
during end-to-end error detection within the  
SSD data path.  
B8h  
BBh  
1
1
1
1
0
0
0
0
1
1
1
0
90  
Uncorrectable Error Count  
The raw value shows the count of errors that  
could not be recovered using Error  
Correction Code (ECC).  
0 (none)  
Temperature  
Reports real-time temperature of drive as  
measured by temperature sensor on drive PCB.  
The normalized value reports the current  
temperature value. The raw value shows current,  
lifetime highest and lifetime lowest  
temperatures. Byte 1:0 = current temp Celsius;  
Byte 3:2 = lifetime highest temp Celsius; Byte  
5:4 = lifetime lowest temp Celsius.  
Power-Off Retract Count (Unsafe Shutdown  
Count)  
BEh  
1
1
0
0
1
0
0 (none)  
The raw value of this attribute reports the  
cumulative number of unsafe (unclean)  
shutdown events over the life of the device. An  
unsafe shutdown occurs whenever the device is  
powered off without STANDBY IMMEDIATE being  
the last command.  
CRC Error Count  
The total number of encountered SATA interface  
cyclic redundancy check (CRC) errors.  
C0h  
C7h  
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)  
0 (none)  
September 2013  
Order Number: 329213-002US  
Product Specification  
21  
Intel® Solid-State Drive 530 Series (M.2)  
ID  
Attribute  
Status Flags  
Threshold  
SP  
EC  
ER  
PE  
OC  
PW  
Host Writes  
The raw value of this attribute reports the total  
number of sectors written by the host system.  
The raw value is increased by 1 for every 65,536  
sectors (32 MB) written by the host.  
Timed Workload Media Wear  
Measures the wear seen by the SSD (since reset  
of the workload timer, attribute E4h), as a  
percentage of the maximum rated cycles.  
Timed Workload Host Read/Write Ratio  
Shows the percentage of I/O operations that are  
read operations (since reset of the workload  
timer, attribute E4h).  
E1h  
E2h  
1
1
0
0
1
0
0 (none)  
0 (none)  
1
1
0
0
1
0
E3h  
E4h  
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)  
0 (none)  
Timed Workload Timer  
Measures the elapsed time (number of minutes  
since starting this workload timer).  
Available Reserved Space  
This attribute reports the number of reserve  
blocks remaining. The normalized value begins at  
100 (64h), which corresponds to 100 percent  
availability of the reserved space. The threshold  
value for this attribute is 10 percent availability.  
Media Wearout Indicator  
E8h  
1
1
0
0
1
1
10  
This attribute reports the number of cycles the  
NAND media has undergone. The normalized value  
declines linearly from 100 to 1 as the average  
erase cycle count increases from 0 to the  
maximum rated cycles.  
Once the normalized value reaches 1, the number  
will not decrease, although it is likely that  
significant additional wear can be put on the  
device.  
E9h  
F1h  
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)  
Total LBAs Written  
The raw value of this attribute reports the total  
number of sectors written by the host system.  
The raw value is increased by 1 for every 65,536  
sectors (32 MB) written by the host.  
Total LBAs Read  
0 (none)  
The raw value of this attribute reports the total  
number of sectors read by the host system. The  
raw value is increased by 1 for every 65,536  
sectors (32 MB) read by the host.  
Total NAND Writes  
Raw value reports the number of writes to NAND  
in 1 GB increments.  
F2h  
F9h  
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)  
0 (none)  
Product Specification  
22  
September 2013  
Order Number: 329213-002US  
Intel® Solid-State Drive 530 Series (M.2)  
Table 13: SMART Attribute Status Flags  
Status Flag  
Description  
Value = 0  
Value = 1  
SP  
EC  
ER  
PE  
Self-preserving attribute  
Event count attribute  
Error rate attribute  
Not a self-preserving attribute  
Not an event count attribute  
Not an error rate attribute  
Not a performance attribute  
Collected only during offline  
activity  
Self-preserving attribute  
Event count attribute  
Error rate attribute  
Performance attribute  
Collected during both  
offline and online activity  
Pre-fail  
Performance attribute  
OC  
PW  
Online collection attribute  
Pre-fail warranty attribute  
Advisory  
5.4.2  
SMART Logs  
The Intel SSD 530 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h.  
The Intel SSD 530 Series implements host vendor specific logs (addresses 80h-9Fh) as read and write  
scratchpads, where the default value is zero (0). Intel SSD 530 Series does not write any specific  
values to these logs unless directed by the host through the appropriate commands.  
The Intel SSD 530 Series also implements a device vendor specific log at address A9h as a read-only  
log area with a default value of zero (0).  
5.5  
Device Statistics  
In addition to the SMART attribute structure, statistics pertaining to the operation and health of the  
Intel SSD 530 Series can be reported to the host on request through the Device Statistics log as  
defined in the ATA specification.  
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is  
accessible using READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.  
The table below lists the Device Statistics supported by the Intel SSD 530 Series.  
Table 14: Device Statistics Log  
Page  
Offset  
Description  
Equivalent SMART attribute if applicable  
0x00  
-
List of Supported Pages  
Power Cycle Count  
Power-On Hours  
Logical Sectors Written  
Logical Sectors Read  
Num Reported Uncorrectable  
Errors  
Num Resets Between  
Command Acceptance and  
Completion  
-
0x08  
0x10  
0x18  
0x28  
0Ch  
09h  
E1h  
F2h  
0x01 - General  
Statistics  
0x08  
BBh  
0x04 - General  
Errors Statistics  
0x10  
-
0x08  
0x10  
0x18  
Num Hardware Resets  
Num ASR Events  
Num Interface CRC Errors  
-
-
-
0x06 -  
Transport  
Statistics  
E9h  
0x07 - Solid  
State Device  
Statistics  
Percentage Used Endurance  
Indicator  
This statistic counts up from 0 rather than down  
from 100, and may go beyond 100 for drives that  
exceed their expected lifetime.  
0x08  
September 2013  
Order Number: 329213-002US  
Product Specification  
23  
   
Intel® Solid-State Drive 530 Series (M.2)  
5.6  
SMART Command Transport  
With SMART Command Transport (SCT), a host can send commands and data to an SSD and receive  
status and data from an SSD using standard write/read commands to manipulate two SMART Logs:  
Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status  
Log Address E1h ("SCT Data Transfer") — used to transport data  
5.7  
Data Set Management Command Set  
The Intel SSD 530 Series supports the Data Set Management command set Trim attribute, which  
consists of:  
DATA SET MANAGEMENT  
5.8  
Host Protected Area Command Set  
READ NATIVE MAX ADDRESS  
SET MAX ADDRESS  
READ NATIVE MAX ADDRESS EXT  
SET MAX ADDRESS EXT  
5.9  
48-Bit Address Command Set  
The Intel SSD 530 Series supports the 48-bit Address command set, which consists of:  
FLUSH CACHE EXT  
READ DMA EXT  
READ NATIVE MAX ADDRESS  
READ NATIVE MAX ADDRESS EXT  
READ SECTOR(S) EXT  
READ VERIFY SECTOR(S) EXT  
SET MAX ADDRESS EXT  
WRITE DMA EXT  
WRITE MULTIPLE EXT  
WRITE SECTOR(S) EXT  
5.10  
General Purpose Log Command Set  
The Intel SSD 530 Series supports the General Purpose Log command set, which consists of:  
READ LOG EXT  
WRITE LOG EXT  
READ LOG DMA EXT  
WRITE LOG DMA EXT  
5.11  
Native Command Queuing  
READ FPDMA QUEUED  
WRITE FPDMA QUEUED  
Product Specification  
24  
September 2013  
Order Number: 329213-002US  
           
Intel® Solid-State Drive 530 Series (M.2)  
5.12  
Software Settings Preservation  
The Intel SSD 530 Series supports the SET FEATURES parameter to enable/disable the preservation of  
software settings.  
5.13  
SATA Link Power Management (LPM)  
The Intel SSD 530 Series supports the SET FEATURES parameter to enable Device Initiated Power  
Management (DIPM). The SSD also supports Host Initiated Power Management (HIPM).  
September 2013  
Order Number: 329213-002US  
Product Specification  
25  
   
Intel® Solid-State Drive 530 Series (M.2)  
6 Certifications and Declarations  
The table below describes the Device Certifications supported by the Intel SSD 530 Series.  
Table 15: Device Certifications and Declarations  
Certification  
Description  
European Economic Area (EEA): Compliance with the essential requirements of EC  
Council Directives Low Voltage Directive (LVD) 2006/95/EC, EMC Directive  
2004/108/EC and Directive 2011/65/EU.  
CE Compliant  
Certified Underwriters Laboratories, Inc. Bi-National Component Recognition; UL  
60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment - Safety - Part  
1: General Requirements)  
UL Certified  
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology  
Equipment - Safety - Part 1: General Requirements)  
Compliance with the Australia/New Zealand Standard AS/NZS3548 and  
Electromagnetic Compatibility (EMC) Framework requirements of the Australian  
Communication Authority (ACA).  
C-Tick Compliant  
BSMI Compliant  
Compliance to the Taiwan EMC standard CNS 13438: Information technology  
equipment - Radio disturbance Characteristics - limits and methods of measurement,  
as amended on June 1, 2006, is harmonized with CISPR 22: 2005.04.  
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility  
Control Regulation and meets the Electromagnetic Compatibility (EMC) Framework  
requirements of the Radio Research Laboratory (RRL) Ministry of Information and  
Communication Republic of Korea.  
KCC  
Microsoft WHCK  
RoHS Compliant  
Microsoft Windows Hardware Certification Kit  
Restriction of Hazardous Substance Directive  
Voluntary Control Council for Interface to cope with disturbance problems caused by  
personal computers or facsimile.  
VCCI  
SATA-IO  
Indicates certified logo program from Serial ATA International Organization.  
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in  
the final product. Intel components as well as purchased components on the finished  
assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21  
requirements. The replacement of halogenated flame retardants and/or PVC may not  
be better for the environment.  
Low Halogen  
Product Specification  
26  
September 2013  
Order Number: 329213-002US  
 
Intel® Solid-State Drive 530 Series (M.2)  
7 Appendix  
The table below describes the sector data returned from an identify device command  
Table 16: Identify Device Returned Sector Data  
Word  
F = Fixed  
V = Variable  
X = Both  
Default Value  
Description  
0
1
2
3
F
0040h  
General configuration bit-significant information  
Obsolete - Number of logical cylinders (16,383)  
Specific configuration  
X
3FFFh  
C837h  
0010h  
0h  
V
X
X
X
Obsolete - Number of logical heads (16)  
Retired  
4-5  
6
003Fh  
Obsolete - Number of logical sectors per logical track (63)  
Reserved for assignment by the CompactFlash* Association  
(CFA)  
7-8  
V
0h  
9
X
F
X
X
F
F
0h  
Retired  
10-19  
20-21  
22  
varies  
0h  
Serial number (20 ASCII characters)  
Retired  
0h  
Obsolete  
23-26  
27-46  
varies  
varies  
Firmware revision (8 ASCII characters)  
Model number (Intel® Solid-State Drive)  
7:0—Maximum number of sectors transferred per interrupt  
on multiple commands  
47  
F
8010h  
48  
F
4000h  
2F00h  
4000h  
0h  
Reserved  
49  
F
Capabilities  
50  
F
Capabilities  
51-52  
53  
X
F
Obsolete  
0007h  
3FFFh  
0010h  
003Fh  
00FBFC10h  
Words 88 and 70:64 valid  
54  
X
X
X
X
Obsolete - Number of logical cylinders (16,383)  
Obsolete - Number of logical heads (16)  
Obsolete - Number of logical sectors per logical track (63)  
Obsolete  
55  
56  
57-58  
Number of sectors transferred per interrupt on multiple  
commands  
59  
V
0110h  
60-61  
62  
F
X
F
F
F
varies  
0h  
Total number of user-addressable sectors  
Obsolete  
63  
0007h  
0003h  
0078h  
Multi-word DMA modes supported/selected  
PIO modes supported  
64  
65  
Minimum multiword DMA transfer cycle time per word  
Manufacturer’s recommended multiword DMA transfer cycle  
time  
66  
F
0078h  
67  
68  
69  
F
F
F
0078h  
0078h  
4010h  
Minimum PIO transfer cycle time without flow control  
Minimum PIO transfer cycle time with IORDY flow control  
Additional Supported  
September 2013  
Order Number: 329213-002US  
Product Specification  
27  
 
Intel® Solid-State Drive 530 Series (M.2)  
Word  
F = Fixed  
V = Variable  
X = Both  
Default Value  
Description  
70  
F
0h  
0h  
Reserved  
71-74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
F
F
F
F
F
V
F
F
F
F
F
V
V
V
V
F
F
V
V
Reserved for IDENTIFY PACKET DEVICE command  
Queue depth  
001Fh  
270Eh  
0086h  
054Ch  
0040h  
03FCh  
FFFFh  
746Bh  
7429h  
6163h  
7469h  
B409h  
6163h  
407Fh  
0002h  
0001h  
00FEh  
FFFEh  
Serial ATA capabilities  
Reserved for future Serial ATA definition  
Serial ATA features supported  
Serial ATA features enabled  
Major version number  
Minor version number  
Command set supported  
Command sets supported  
Command set/feature supported extension  
Command set/feature enabled  
Command set/feature enabled  
Command set/feature default  
Ultra DMA Modes  
Time required for security erase unit completion  
Time required for enhanced security erase completion  
Current advanced power management value  
Master Password Revision Code  
Hardware reset result: the contents of bits (12:0) of this  
93  
F
0h  
word shall change only during the execution of a hardware  
reset  
Vendor’s recommended and actual acoustic management  
value  
94  
V
0h  
95  
F
V
V
F
V
V
F
F
0h  
Stream minimum request size  
Streaming transfer time - DMA  
Streaming access latency - DMA and PIO  
Streaming performance granularity  
Maximum user LBA for 48-bit address feature set  
Streaming transfer time - PIO  
96  
0h  
97  
0h  
98-99  
100-103  
104  
0h  
varies  
0h  
105  
0001h  
4000h  
Reserved  
106  
Physical sector size / logical sector size  
Inter-seek delay for ISO-7779 acoustic testing in  
microseconds  
107  
F
0h  
108-111  
112-115  
116  
F
F
V
F
F
varies  
0h  
Unique ID  
Reserved for world wide name extension to 128 bits  
Reserved for technical report  
Words per logical sector  
0h  
117-118  
119  
0h  
401Ch  
Supported settings  
Product Specification  
28  
September 2013  
Order Number: 329213-002US  
Intel® Solid-State Drive 530 Series (M.2)  
Word  
F = Fixed  
V = Variable  
X = Both  
Default Value  
Description  
120  
F
401Ch  
Command set/feature enabled/supported  
Reserved  
121-126  
127  
F
0h  
F
0h  
Removable Media Status Notification feature set support  
Security status  
128  
V
X
F
0021h  
varies  
0h  
129-159  
160  
Vendor-specific  
CompactFlash Association (CFA) power mode 1  
Reserved for assignment by the CFA  
Data set management Trim attribute support  
Additional Product Identifier  
Reserved  
161-168  
169  
X
X
F
0h  
0001h  
0h  
170-173  
174-175  
176-205  
206  
F
0h  
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0h  
Current media serial number  
SCT Command Transport  
0025h  
0h  
207-208  
209  
Reserved  
4000h  
0h  
Alignment of logical blocks within a physical block  
Write-Read-Verify Sector Count Mode 3 (DWord)  
Write-Read-Verify Sector Count Mode 2 (DWord)  
NV Cache Capabilities  
210-211  
212-213  
214  
0h  
0h  
215-216  
217  
0h  
NV Cache Size in Logical Blocks (DWord)  
Nominal media rotation rate  
Reserved  
0001h  
0h  
218  
219  
0h  
NV Cache Options  
220  
0h  
Write-Read-Verify feature set  
Reserved  
221  
0h  
222  
103Fh  
0h  
Transport major version number  
Transport minor version number  
Reserved  
223  
224-229  
230-233  
0h  
0h  
Extended Number of User Addressable Sectors (QWord)  
Minimum number of 512-byte data blocks per DOWNLOAD  
MICROCODE command for mode 03h  
Maximum number of 512-byte data blocks per DOWNLOAD  
MICROCODE command for mode 03h  
234  
235  
X
X
0002h  
0400h  
236-254  
255  
X
X
0h  
Reserved  
varies  
Integrity word  
Note:  
F = Fixed. The content of the word is fixed and does not change. For removable media devices, these values  
may change when media is removed or changed.  
V = Variable. The state of at least one bit in a word is variable and may change depending on the state of the  
device or the commands executed by the device.  
X = F or V. The content of the word may be fixed or variable.  
September 2013  
Order Number: 329213-002US  
Product Specification  
29  

Marantz SA 12S1 User Manual
LG Electronics GSA E10N User Manual
Lenoxx Electronics CD 78 User Manual
Kalorik Team International Group Coffeemaker CM 38933 User Manual
Insignia NS P3114 User Manual
iHome IH B934NB User Manual
Fetco Home Decor Coffeemaker CBS 2032E User Manual
Fellowes S701cm P70cm User Manual
Ericsson I 888 WORLD User Manual
APC Smart UPS 1000 VA User Manual