Zx5 Series
Loudspeaker
Owner’s Manual
Zx5-60
Zx5-90
Table of Contents
Important Safety Instructions ....................................................................................................... 1
Zx5 Series Owner’s Manual ......................................................................................................... 1
Safety First ................................................................................................................................... 3
Description ................................................................................................................................... 4
System Features - Zx5 ................................................................................................................. 4
System Coverage - Zx5................................................................................................................ 4
Suspending Zx5 Speaker Systems .............................................................................................. 5
Zx5 Stage Monitor Positions....................................................................................................... 10
Specifications ..............................................................................................................................11
Dimensions ................................................................................................................................ 12
Block Diagram ............................................................................................................................ 12
Frequency Response, Beamwidth, and Directivity ..................................................................... 13
Zx5 Rigging Accessory Reference Table.................................................................................... 14
ELECTRO-VOICE® Zx5 Owner’s Manual
2
Safety First
When setting up, installing and using the Electro-Voice® Zx5 speaker system, there are a number
of precautions that you should follow:
· When Electro-Voice® Zx5 speakers are used for portable applications in which they will be
positioned directly on the floor, make sure that the floor or stage is solid and secure.
· Electro-Voice® Zx5 speakers include 1-3/8 inch stand mounts to allow mounting on tripod stands.
Make sure to:
· Check the specifications of the speaker stand to be certain it is capable of supporting the weight
of the speaker.
· Check that the speaker stand is placed on a flat, stable surface and be sure to fully extend the
legs of the stand. Do not try to make the stand “taller” and compromise its structural integrity.
· Route cables and position the stand so that performers, production crew and audience members
will not trip over the stand or cables and pull the speaker system over. Secure cables with wire
ties or tape whenever possible.
· Do not attempt to suspend more than one speaker on a stand designed for a single speaker
· Unless you are confident that you can safely handle lifting the weight of the speaker onto the
stand, ask another person to help you place it.
· If you intend to hang or fly the Zx5 system, only do so safely with the correct hardware and
accessories.
WARNING: Suspending any object is potentially dangerous and should only be
attempted by individuals who have a thorough knowledge of the techniques and
regulations of rigging objects overhead. Electro-Voice® strongly recommends that Zx5
speakers be suspended taking into account all current national, federal, state and
local regulations. It is the responsibility of the installer to ensure that Zx5 speakers are
safely installed in accordance with all such regulations. If Zx5 speakers are
suspended, Electro-Voice® strongly recommends that the system be inspected at least
once a year. If any sign of weakness or damage is detected, remedial action should
be taken immediately. There are data sheets for each EV Suspension and Array Kit
that should also be consulted prior to suspending speakers.
· Electro-Voice® does not recommend use of Zx5 speakers outdoors without protection
from rain or in high moisture environments.
· Electro-Voice® Zx5 loudspeakers are easily capable of generating sound pressure
levels sufficient to cause permanent hearing damage to anyone within normal
coverage distance. Caution should be taken to avoid prolonged exposure to sound
pressure levels exceeding 90 dB.
3
ELECTRO-VOICE® Zx5 Owner’s Manual
Description
The Electro-Voice® Zx5 is a unique, lightweight package of pro audio performance, versatility and
aesthetics. You won’t find a speaker system available on the market that offers the unbelievable
sound, incredible flexibility and tremendous output capability of the Zx5 anywhere near it’s size
and weight.
System Features - Zx5
· Full-face grille for a clean, professional look.
· DVX3150 15” woofer with 500 watts continuous power handling.
· ND2 2” voice coil, 1” exit neodymium compression driver.
· Two models: 60° x 60° or 90° x 50° coverage patterns.
· Adjustable monitor angle built into enclosure.
· Integral rigging points and inserts for multiple flying options.
· Full line of accessories for any installation.
System Coverage - Zx5
Coverage Patterns and Applications
Zx5-60
Zx5-90
60° x 60° coverage for long-throw and cluster applications
90° x 50° for wider coverage or shorter distances
Figure 1a:
Figure 1b:
3D EASE Directivity Balloon,
3D EASE Directivity Balloon,
Zx5-60, 60° x 60° Coverage
Zx5-90, 90° x 50° Coverage
ELECTRO-VOICE® Zx5 Owner’s Manual
4
Suspending Zx5 Speaker Systems
Zx5 enclosures have 5 steel anchor points internally mounted on the top, bottom, and rear. Single
stud fittings can be attached to these anchor plates and used as suspension points. Each of
these anchor plates also has a M8 thread to accept rated forged M8 shoulder eyebolts. In
addition to these points there are five additional M8 threaded points; two on the handle side, and
three on the rear. These points can be used for suspending Zx5s vertically, horizontally,
individually, in clusters, or to attach to EV mounting brackets. Working load limits for the Zx5 and
fittings are shown in Figure 2. Zx5 has been pull tested and exceeds a safety factor of 8 to 1
when properly used.
Figure 2:
Working Load-Limit Rating of Zx5 Speaker System
Prior to each use, inspect the grid assembly or suspension point(s) and associated hardware for
any cracks, deformations, broken welds, corrosion, missing or damaged components which could
reduce the grid assembly or suspension point(s) strength. Replace any damaged hardware. Never
exceed the limitations or maximum recommended load intended for grid assembly design or
suspension point(s). As an added safety measure, it is suggested that the user install a second
suspension point back to the grid (or building structural supports). This redundant safety point
should have as little slack as possible (less than one inch is preferable).
Prior to each use, inspect the loudspeaker enclosures for any cracks, deformations, missing or
damaged components, which could reduce enclosure strength. Inspect the bracket assembly on
the enclosures for any cracks, deformations, missing or loose screws which could reduce the
flying hardware strength. Replace any loudspeaker systems that are damaged or missing
hardware. Never exceed the limitations or maximum recommended load for the Zx5 systems.
5
ELECTRO-VOICE® Zx5 Owner’s Manual
Suspending Zx5 Speaker Systems (cont’)
Zx5 M8 Suspension Points
Metric (M8) inserts are equipped on the top and bottom of the enclosure, around the handle, and
on the back of the enclosure for a total of 10 points. The inserts can be used to attach forged
eyebolts or rigging brackets.
(2) M8 Suspension Points
(Single-Stud Anchor Plate
Removal Required)
(2) M8 Suspension Points
(Decal Removal Required)
(2) M8 Suspension Points
(Decal Removal Required)
(2) M8 Suspension Points
(Removal of Handle Bolts
Required)
(2) M8 Suspension Points
(Single-Stud Anchor Plate/
Decal Removal Required)
Figure 3a:
Figure 3b:
Zx5 M8 Suspension Points (Top, Handle, Rear)
Zx5 M8 Suspension Points (Bottom)
ELECTRO-VOICE® Zx5 Owner’s Manual
6
Suspending Zx5 Speaker Systems (cont’)
Suspending the Zx5 using optional Electro-Voice Single-Stud Rigging Kits
The Zx5 is shipped with three single-stud anchor plates for rigging with single-stud rigging. There
are two more locations on the bottom to mount single-stud anchor plates for flying the Zx5 upside-
down or horizontally. All of these locations can
facilitate M8 Eyebolts if desired as well.
Figure 4:
Suspending the Zx5 Using Included Single-Stud
Anchor Plates
Kit Used (Left View) -
SSK-1 Single-Stud Rigging Kit (x1)
Kits Used (Right View) -
SSK-1 Single-Stud Rigging Kit (x2)
EBK-3 Forged M8 Eyebolt Kit (x1)*
*EBK-3 on Bottom of Top
Enclosure
(not shown, see Figure 3b)
Step 2: Attach Single-Stud Anchor Plates
Step 1: Remove Decals
Removed from the Top of the Enclosure
(shown) or Eyebolts (not shown)
Figure 5:
Suspending the Zx5 Upside-Down Using
Included Single-Stud Anchor Plates and Single-
Stud Rigging Kit
7
ELECTRO-VOICE® Zx5 Owner’s Manual
Suspending Zx5 Speaker Systems (cont’)
Horizontal Suspension of the Zx5
The Zx5 is capable of being suspended horizontally from the side (handle) or downward from the
rear with the use of M8 Eyebolts.
Figure 6:
Suspending the Zx5 Downward from Rear Using
Optional Forged Eyebolt Kit*
Kit Used - EBK-3 Forged M8 Eyebolt Kit (x1)
*Note - When suspending from the rear M8 suspension
points, it is recommended that the (2) left M8 suspension
points are used on the rear of the enclosure for best weight
distribution in relation to enclosure’s center of gravity.
Figure 7:
Assembling Eyebolts to Handle
for Horizontal Suspension
Step 1: Remove Handle Bolts
Step 2: Attach Eyebolts
Figure 8:
Suspending the Zx5 Horizontally from Handle Using
Optional Forged Eyebolt Kit
Kit Used - EBK-3 Forged M8 Eyebolt Kit (x1)
ELECTRO-VOICE® Zx5 Owner’s Manual
8
Suspending Zx5 Speaker Systems (cont’)
Arraying and Suspending the Zx5 using optional Electro-Voice Mounting or Array Brackets
Figure 9 shows several applications using EV mounting and array brackets. Carefully follow the
instructions in this manual & the user manual packaged with EV brackets, and always use safe
rigging practices when suspending Zx5.
Kit Used - MB5 Wall/Ceiling Mounting Bracket
(Wall Configuration)
Kit Used - MB5 Wall/Ceiling Mounting Bracket
(Ceiling Configuration)
Kits Used - CB5 Array Bracket Kit (x1)*
SSK-1 Single-Stud Rigging Kit (x1)
Kit Used - CB5 Array Bracket Kit (x2)*
Kits Used - CB5 Array Bracket Kit (x2)*
SSK-1 Single-Stud Rigging Kit (x2)
EBK-3 Forged M8 Eyebolt Kit (x1)
Kits Used - CB5 Array Bracket Kit (x4)*
EBK-3 Forged M8 Eyebolt Kit (x1)
*Note - CB5 Array Kits can be used for 60° or 90° Splay Angles
Figure 9:
Arraying and Suspending the Zx5
9
ELECTRO-VOICE® Zx5 Owner’s Manual
Zx5 Stage Monitor Positions
Zx5 as a Monitor
By design the Zx5 is a perfect solution for stage monitors. As different stage sizes require
different monitor angles, the Zx5 offers two angles without any additional accessories.
Step 1: Remove Monitor Foot
Screws
Step 2: Rotate Monitor Feet 180°
Step 3: Re-attach Monitor Feet
and Screws
Figure 10:
Switching the Monitor Feet from the 45° to 55° Positions
Figure 11a:
Figure 11b:
Zx5 as Monitor in 45° Position
Zx5 as Monitor in 55° Position
CAUTION: When flipped to 55° the feet protrude from the enclosure. Care should be
taken when moving the enclosure, since damage to the feet or enclosure might occur if
the system is dropped or slid across a rough surface. It is recommended that the feet
be returned to the 45° position for transport.
ELECTRO-VOICE® Zx5 Owner’s Manual
10
Specifications
Freq. Response1 (-3 dB): 58 Hz - 15 kHz
Freq. Range1 (-10 dB): 41 Hz - 20 kHz
Rec. Hipass Frequency: 36 Hz
Axial Sensitivity: 99 dB (1W/1m)
Max Calculated SPL: 133 dB
Horizontal Coverage: 90° or 60°
Vertical Coverage: 50° or 60°
Rated System Power: 600W Continuous, 2400W Peak
LF Power Handling: 500W Continuous, 2000W Peak
HF Power Handling: 40W Continuous, 160W Peak
LF Transducer: DVX3150, 15in (300mm) Driver
HF Transducer: ND2, 1in. (50.8mm) exit Neodymium
Compression Driver
Crossover Frequency: 1.5 kHz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.5 Ohms
Connectors: Neutrik Speakon NL4
Glandnut SJO Cable (PI Versions Only)
Enclosure Material: Polypropylene Structural Foam
Suspension: Enclosure has locations for 5 Single-
Stud Attatchment Plates and 10 Forged
Steel Eyebolts - 2 on Top, 2 on Bottom,
2 on Side, and 4 on Rear of Enclosure
Grille: Polyester Powder Coated, 16GA
Galvanized Steel
Environmental Spec: IEC 529 IP24 / IP44 (PI Version)
Dim (H x W x D): 27.26" x 17.57" x 16.16"
(692mm x 446mm x 411mm)
Net Weight: 49 lbs (22.2 kg)
Shipping Weight: 57.4 lbs (26.0 kg)
1 Half Space measurement.
11
ELECTRO-VOICE® Zx5 Owner’s Manual
Dimensions
Top View
Left View
Front View
Right View
Rear View
Bottom View
Block Diagram
ELECTRO-VOICE® Zx5 Owner’s Manual
12
Frequency Response, Beamwidth, and Directivity
Zx5-60, 60° x 60° Coverage
Zx5-90, 90° x 50° Coverage
Frequency Response & Impedance:
Frequency Response & Impedance:
Beamwidth:
Beamwidth:
Directivity:
Directivity:
13
ELECTRO-VOICE® Zx5 Owner’s Manual
Zx5 Rigging Accessory Reference Table
Model
CB5-B
CB5-W
MB5-B
MB5-W
SSK-1
EBK-3
Description
Part No.
Array Bracket Kit, Black Finish
Array Bracket Kit, White Finish
Wall/Ceiling Mounting Bracket Kit, Black Finish
Wall/Ceiling Mounting Bracket Kit, White Finish
Single-Stud Rigging Kit (Set of 3)
Forged M8 Eyebolt Kit (Set of 3)
301625-001
301625-002
301626-001
301626-002
301633-000
301634-000
ELECTRO-VOICE® Zx5 Owner’s Manual
14
U.S.A. and Canada:
For customer orders, contact the Customer Service department at:
800/392-3497 Fax: 800/955-6831
For warranty repair or service information, contact the Service Repair Department at:
800/685-2606
For technical assistance, contact Technical Support at:
866/78 AUDIO
Specifications subject to change without notice.
All Locations:
952-884-4051 Fax: 952-884-0043
Printed in U.S.A
© Telex Communications, Inc. 6/2004
Part Number 38110-355 Rev 1
ELECTRO-VOICE® Zx5 Owner’s Manual
|