MA0507-EA
Operation Guide DQ-584/584B
4 HR (MONTH) button
ILLUSTRATION
• Pressing this button while “TM” is selected by the Mode switch 5 advances the hour setting.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the month setting.
5 Mode switch
NORMAL: For normal use
AL: For adjusting the alarm setting
TM: For adjusting the time setting
CALENDAR: For adjusting the date setting
6 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
7 °C/°F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
8 Battery
SETTING THE CLOCK
1. Slide the Mode switch 5 to
Press to advance the
hour setting.
Press to advance the
minute setting.
Press to toggle between
12-hour and 24-hour
timekeeping.
“TM”. This causes the current
time to flash on the display.
2. Use the 12 • 24 HR (YEAR)
button 2, MIN (DATE) button
3, and HR (MONTH) button 4
to set the time. Holding down
the MIN (DATE) button 3 or
HR (MONTH) button 4
changes the corresponding
setting at high speed.
• Make sure you set the correct
am/pm time if you are using 12-
hour timekeeping. The PM
indicator indicates PM times,
while nothing is indicated for AM
times.
• The seconds count reverts to 00
automatically whenever you finish
adjusting the minute setting.
3. Slide the Mode switch 5 to
“CALENDAR”. This causes the
current date to flash on the
display.
PM indicator
Hour
Minutes
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Press to advance the
month setting.
Press to advance the
day setting.
Press to advance the
year setting.
Alarm Off
Snooze Alarm On
HR (MONTH) or MIN (DATE)
button depressed
PM indicator
Current temperature
Snooze on indicator
Alarm indicator
4. Use the 12 • 24 HR (YEAR)
button 2, MIN (DATE) button
3, and HR (MONTH) button 4
to set the date. Holding down
any button advances the
corresponding setting at high
speed.
• You can set the year in the range
of 1990 to 2030.
Current time
(Hour, minutes)
Date
(month – day)
Alarm on indicator
Alarm time
Year
Month
Day
GENERAL GUIDE
1 SNOOZE/LIGHT button
• Press this button to illuminate the display for about three seconds.
• Pressing this button while the alarm is sounding stops the alarm.
5. Slide the Mode switch 5 to “NORMAL”. This will
cause the figures on the display to stop flashing.
2 12 • 24 HR (YEAR) button
• Press this button to toggle between 12-hour and 24-hour timekeeping.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the year setting.
3 MIN (DATE) button
• Pressing this button while “TM” is selected by the Mode switch 5 advances the minute setting.
• Pressing this button while “CALENDAR” is selected by the Mode switch 5 advances the day setting.
1
|