User Guide
Nokia 3361
User Guide
Phone notes
Notes
Where to get information
My number
Wireless service provider
Voice mail number
Wireless service
provider’scustomer
care
Model number
Phone type
3361
NPW-1
Type label. Located under
the battery.
ESN (Electronic
serial number)
The wireless phone described in this guide is approved for use in TDMA and AMPS
networks.
LEGAL INFORMATION
Part No. 9357902, Issue No. 1
Copyright ©2002 Nokia. All rights reserved.
Nokia, Nokia Connecting People, the Nokia Original Accessories logos, Nokia 3361,
Space Impact and Snake II are trademarks or registered trademarks of Nokia.
Printed in Canada 8/2002
US Patent No 5818437 and other pending patents.
T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All
rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
The information contained in this user guide was written for the Nokia 3361 phone.
Nokia operates a policy of continuous development. Nokia reserves the right to
make changes and improvements to any of the products described in this
document without prior notice
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR
INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED
BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT.
NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY
TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This product contains commodities, technology or software exported from the
United States in accordance with the Export Administration regulations. Diversion
contrary to U.S. law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
Contents
1
Safety first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2
Get the most out of this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Register your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
E-newsletters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Learn about accessibility solutions . . . . . . . . . . . . . . . . . . . . . . . . 6
Contact Nokia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contact your service provider . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3
Charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Remove the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Important battery information . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Prolong battery life. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Switch on your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Set up your headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Use the carrying case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjust the volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjust screen contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4
Review the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Your Nokia 3361 phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
About the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Memory use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Learn the keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Make and answer calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
[ i ]
Use the selection keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Browse phone menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5
6
ABC and 123 methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Write with predictive text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Store names and numbers. . . . . . . . . . . . . . . . . . . . . . . . . 38
Recall information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Use phone book menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Edit a name or number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Erase stored names and numbers . . . . . . . . . . . . . . . . . . . . . . . . 42
Erase the entire phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Add a second number to a name. . . . . . . . . . . . . . . . . . . . . . . . . 43
Check memory status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
7
8
Check call history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Check missed, received, or dialed calls . . . . . . . . . . . . . . . . . . . . 45
Clear call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Check call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Turn on a current call timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Clear call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Use advanced calling features. . . . . . . . . . . . . . . . . . . . . . 49
Set in-call options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
[ ii ]
Use call forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Redial automatically. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Use a calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Send your own number in caller ID. . . . . . . . . . . . . . . . . . . . . . . 56
Set touch tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
9
Check for messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Set up your voice mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Set greetings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Listen to your voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
What is a profile? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Select a different profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Customize a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Rename profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
11 Personalize phone settings. . . . . . . . . . . . . . . . . . . . . . . . .67
Set the language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Set and display the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Set the clock to be updated by the network . . . . . . . . . . . . . . . 68
Add a welcome note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Use speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Set your phone to answer automatically . . . . . . . . . . . . . . . . . . 71
Set the lights (car kit only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Restore the factory settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
12 Manage phone security . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Change your security code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Lock the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
[ iii ]
13 Manage reminders and notes . . . . . . . . . . . . . . . . . . . . . . 77
Add a reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Add a note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Send and receive a reminder or note . . . . . . . . . . . . . . . . . . . . . 78
Manage prepaid service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Save your access numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Check your prepaid balance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Set up how your phone selects a network . . . . . . . . . . . . . . . . . 83
Use your phone while traveling. . . . . . . . . . . . . . . . . . . . . . . . . . 84
About text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Use folders for text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Write and send a text message . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Resend a message from the outbox . . . . . . . . . . . . . . . . . . . . . . 88
Receive a text message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Read a text message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Save a message in the archive folder . . . . . . . . . . . . . . . . . . . . . 90
When your phone’s memory is full . . . . . . . . . . . . . . . . . . . . . . . 90
Erase messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Reply to a message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Forward a message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Send and receive e-mail messages . . . . . . . . . . . . . . . . . . . . . . . 92
Use templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Chat with other phone users . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Use picture messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
[ iv ]
Send and receive business cards . . . . . . . . . . . . . . . . . . . . . . . . . 98
Set the alarm clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Use the calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Infrared basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Send and receive information . . . . . . . . . . . . . . . . . . . . . . . . . . 105
PC Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
19 Connect to the Wireless Internet. . . . . . . . . . . . . . . . . . .108
Set up for browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Sign on to the Wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . 109
20 Play games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Space impact. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Pairs II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Snake II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
21 Frequently asked questions (FAQ) . . . . . . . . . . . . . . . . . .116
22 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
23 Reference information . . . . . . . . . . . . . . . . . . . . . . . . . .121
Battery statements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Use proper care and maintenance. . . . . . . . . . . . . . . . . . . . . . .122
Understand important safety information . . . . . . . . . . . . . . . .123
Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Certification Information (SAR). . . . . . . . . . . . . . . . . . . . . . . . .128
[ v ]
Use accessories safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Warranty information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Appendix A
Message from the CTIA to all users of mobile phones . . . . . . 147
Appendix B
Message from the FDA to all users of mobile phones. . . . . . . 151
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
[ vi ]
Safety first
1 Safety first
Read these simple guidelines. Breaking the rules may be dangerous or
illegal. Further detailed information is given in this manual.
Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Don't use a hand-held phone while driving.
INTERFERENCE
All wireless phones may get interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any regulations or rules. Switch the phone off near
medical equipment.
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Don't use the phone at a refueling point. Don't use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Don't use the phone where blasting is in progress. Observe
restrictions, and follow any regulations or rules.
USE SENSIBLY
Use only in the normal position. Don't touch the antenna
unnecessarily.
[ 1 ]
QUALIFIED SERVICE
Only qualified personnel may install or repair phone equipment.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your wireless phone is not water-resistant. Keep it dry.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for
detailed safety instructions. Do not connect incompatible
products.
CALLING
Ensure the phone is switched on and in service. Enter the
phone number, including the area code, then press
a call, press . To answer a call, press
. To end
.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press
as
many times as needed (for example, to exit a call, to exit a
menu) to clear the display. Enter the emergency number, then
press
. Give your location. Do not end the call until told to
do so.
[ 2 ]
Welcome
2 Welcome
Congratulations on your purchase of a Nokia
3361 mobile phone, a new tool for the mobile
information society.
Nokia recommends that you read this chapter
before you use your new phone. You will find
useful information about:
•
•
•
How to use this guide
How to understand network services
How to contact Nokia
• GET THE MOST OUT OF THIS GUIDE
The tips that follow can help you use this guide effectively.
Understand the terms
This guide uses certain terms for certain actions.
•
•
•
•
•
Press means to briefly press and then release a key. For example,
press means “Press the zero key.”
Press Menu means to press the key that is below the word Menu on
the phone’s screen.
Press and hold means to press and hold a key for 1 to 3 seconds
(depending on the feature you’re using), then release the key.
You use the selection keys
and
to choose an option on
a menu.
Highlighted means that an option you see on the screen is enclosed
in a dark bar. Choices you make with the two selection keys act on
the highlighted option.
[ 3 ]
Notice text conventions
This user guide provides text clues to help make instructions clear and
easy to follow. These clues are called conventions.
Convention
bold
What it means
The word or phrase appears on the phone’s screen.
bold and blue The word is an address on the World Wide Web.
bold and blue A definition for the word or phrase appears in the terms
list (glossary) near the end of the user guide.
italic
Italics indicate emphasis. Pay close attention to any
information in italics.
Follow graphic clues
This guide uses certain icons (small pictures) to alert you to important
information.
Tip: Provides information about a shortcut or an alternate method
of doing something
Note: Explains a feature or points out an important concept
Important: Alerts you to information critical to using a feature
correctly
Caution: Warns you when you may lose information
Warning: Helps you avoid personal injury, damage to the phone,
or property damage
[ 4 ]
Welcome
Look for updates
From time to time, Nokia may update this user guide to reflect changes
or corrections. The latest version may be available at the Nokia site on the
internet at
www.nokia.com
An interactive user guide that provides step-by-step instructions for any
of your phone features is available at
www.nokiahowto.com
• UNDERSTAND WIRELESS NETWORK SERVICES
A number of features included in this guide are called Network Services.
These are special services you arrange through your wireless service
provider. Before you can take advantage of any of these Network Services,
you must subscribe to them through your service provider and obtain
instructions for their use from your service provider.
Note: Some networks may not support all language-dependent
characters and/or services.
Network services for your Nokia phone include:
•
•
•
•
•
•
Voice mail and voice privacy
Call waiting, call forwarding, and caller ID
Text and picture messages
Ability to send your own number
News and information services
Selected Internet access services
Sign up with a service provider
Before you can use any network services, you must sign up with a wireless
service provider. Your service provider will supply descriptions of special
features and instructions for using their services.
[ 5 ]
• REGISTER YOUR PHONE
Make sure to register your phone at www.warranty.nokiausa.com or
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs
better if you should need to call the center or have your phone repaired.
• E-NEWSLETTERS
When you register your phone, you can sign up for Nokia's e-newsletter
Nokia Connections if you would like. You will receive tips and tricks on
using your phone, accessory information, and special offers.
Note differences among service providers
Wireless network providers differ from each other in certain ways. For
example, some networks may not supportall language-dependent characters.
When you sign up for service, make sure your provider offers the services
you need.
• LEARN ABOUT ACCESSIBILITY SOLUTIONS
Nokia is committed to making mobile phones easy to use for all
individuals, including those with disabilities. Nokia maintains an internet
site that is dedicated to accessibility solutions. For more information
about phone features, accessories and other Nokia products designed
with your needs in mind, visit the web site at
www.nokiaaccessibility.com
Alternate format user guides
This user guide is available in alternate formats, including:
Braille
Large print
Audio cassette
E-text (electronic documents on a 3.5-inch disk, in Microsoft Word or
WordPerfect format)
To request any format, call Nokia Customer Care at (888) 665-4228.
Hearing-impaired and other TTY users can contact Nokia at (800) 246-6542.
[ 6 ]
Welcome
LPS-3 Mobile Inductive Loopset
The LPS-3 loopset is a Nokia accessory designed to make the 3300 series
phone more accessible to hearing-aid users. The LPS-3 loopset is also
compatible with the Nokia 8200- and 8800-series digital phones.
The Nokia loopset gives hearing-impaired wireless customers clear access
to digital telephony for the first time. With the loopset, people who use a
T-coil equipped hearing aid can make and receive calls without noise
interference.
HOW THE LOOPSET WORKS
The LPS-3 loopset uses inductive technology to
transmit sound to a hearing aid equipped with a T-
coil. With inductive technology, the sound from
the phone is amplified more efficiently and back-
ground noise is eliminated.
The loopset is easy to use. You wear the loopset
around your neck, connect it to your phone, and
speak directly toward the microphone.
To activate the loopset for use, go to the loopset
profile under Menu 4-4-3 (Menu > Settings > Accessory settings >
Loopset). For detailed instructions on using the loopset, refer to the
booklet that comes with the LPS-3.
Note: The loopset can be purchased separately as an accessory.
See “Loopset (LPS-3)” on page 134.
Set up the TTY/TDD profile
You can connect your phone to a TTY/TDD using the Nokia TTY/TDD
Adapter (HDA-9). In order for your phone to recognize the TTY/TDD, you’ll
need to set up the TTY/TDD profile, under Accessory settings.
Important: Some manufacturers of TTY/TDD devices suggest that
the phone be least 18 inches from the TTY/TDD device. When
connecting to any other device, read its user guide or contact its
manufacturer for detailed instructions and safety information.
[ 7 ]
1
2
Connect the TTY/TDD via cable to the HDA-9 adapter.
Plug the HDA-9 adapter into the connector on the bottom of your
phone, as shown in the illustration.
18”
3
4
Use TTY).
Scroll to Yes, then press Select.
NOTES ABOUT TTY/TDD CALLS
•
The Nokia TTY/TDD Adapter (HDA-9) is for use with compatible
TTY/TDD devices only. Check with the manufacturer of the TTY/TDD
device to ensure that the connection is compatible.
•
•
Check with the manufacturer of the TTY/TDD device for the
connecting cable.
TTY/TDD communications depend on network availability. Check with
your service provider for availability and description of services.
MAKE A TTY/TDD CALL
Tip: Before making a TTY/TDD call with your Nokia phone, check the
signal strength. See “In the Start screen” on page 20 for details.
From the Start screen, enter the number and press
1
2
.
When the receiving party answers, begin typing your conversation on
the TTY/TDD.
[ 8 ]
Welcome
RECEIVE A TTY/TDD CALL
Tip: You may find it helpful to use the vibrating alert under the
Profiles menu. See “Set a vibrating alert” on page 64 for details.
1
2
Make sure the TTY/TDD device is connected to your phone.
Press
to answer the call, then type your responses on the TTY/TDD.
END A TTY/TDD CALL
Press
.
Accessible features
This phone has many accessible features, including:
Nibs beneath the
key for quick reference to the keypad
Tactile feedback when a you press a key
Adjustable display contrast
Ability to send and receive short text messages
Convenience of 1-touch dialing
Vibrating alert for incoming calls and messages
• YOUR PHONE’S LABEL
When you call Nokia Customer Care Center or your service provider, you
will need to provide specific information about your phone. This
information is recorded on the phone’s type label. The type label is located
under the battery inside the phone’s back cover. It contains the model and
serial numbers as well as other important information about your phone.
Please do not remove or deface the label.
Note: The battery must be removed to view your phone’s type
label. See “Remove the battery” on page 12 for more information.
[ 9 ]
• CONTACT NOKIA
If you have a question and have already checked the Troubleshooting
section (see page 140), we recommend that you have the following
information available before contacting the Nokia Customer Care Center
or the service provider:
•
•
Your phone’s model number
ESN (Electronic serial number – located on the label under the
battery)
•
•
Your billing address ZIP code
The phone or accessory in question
Customer Interaction Centre,
Nokia Customer Care Center, USA
Canada
Nokia Mobile Phones
7725 Woodland Center Blvd.
Suite #150
Nokia Products Ltd.
601 Westney Road South
Ajax, Ontario L1S 4N7
Tampa, Florida 33614
Tel: 1-888-NOKIA-2U
(1-888-665-4228)
Fax: 1-813-249-9619
For TTY users: 1-800-24-NOKIA
(1-800-246-6542)
Tel: 1-888-22-NOKIA
(1-888-226-6542)
Fax: 1-905-427-1070
Web site: www.nokia.ca
• CONTACT YOUR SERVICE PROVIDER
You may want to save your service provider’s customer support telephone
number into your phone. This will let you easily contact your provider if
you have questions or issues with your phone service.
[ 10 ]
Set up your phone
3 Set up your phone
Before you use your phone, you need to:
•
•
•
Charge the battery.
Connect any accessories you want to use.
Adjust a few phone settings to suit your needs.
If your dealer has already installed the battery, you can skip to “Charge
the battery.”
• INSTALL THE BATTERY
1
Push in the release button on the back of the
phone (1), slide the cover toward the top of
the phone (2 and 3), remove the cover.
2
Place the battery in the compartment with
the label side facing up and the golden
contact areaaligned with the contact prongs.
3
4
Slide the battery into place and snap
the top of the battery in so that the
bar comes down snugly next to the
battery.
Bar
Replace the cover (1) and slide it until
you hear a click (2).
[ 11 ]
• CHARGE THE BATTERY
Follow these guidelines to charge the battery.
1
2
Connect the charger to an AC wall outlet.
With your phone on or off, connect the
lead from the charger to the bottom of
the phone.
The battery indicator bar appears on the
screen and starts to scroll up and down
after a few seconds.
Battery
indicator
3
Disconnect the charger from the phone and
AC outlet when the battery is fully charged.
• REMOVE THE BATTERY
You will need to remove the existing battery if you want to install a new
battery or if you’ve purchased a spare battery. Make sure the phone has
been turned off for 10 seconds.
1
2
Remove the back cover of the phone.
Look for the battery latch that runs along
the end of the battery nearest the top of
the phone.
3
4
With your thumbs, push the latch away
from the battery until the latch snaps and
the battery lifts slightly.
Take out the battery.
Caution: Use only your hands to remove the battery. Do not use
any objects that may damage the phone or the battery.
[ 12 ]
Set up your phone
• IMPORTANT BATTERY INFORMATION
•
With your phone turned off, charge your new battery for three hours
before its first use. Use the battery until it is fully discharged. Repeat
this procedure twice for a total of three charging cycles.
•
•
•
Battery operation time may be less than estimated times during the
first charges. This condition is normal.
When the battery is fully discharged, the scrolling bars may not
appear immediately.
After the first charge, you can make and receive calls during the
charging cycle, but the calls interrupt the charging. When the phone
call ends, the charging will resume.
•
The bars on the screen stop scrolling and remain constant when the
phone is fully charged. If you leave the phone connected to the
charger, the battery receives an additional charge.
Note: The battery will accept a “trickle charge” for an additional
two hours. See “Reference information” on page 121 for more
information on batteries.
•
Charging time depends on the charger and battery used. See “Batteries”
on page 131 for charging, talk, and standby times.
• PROLONG BATTERY LIFE
A NiMH battery may last longer and have better performance if you fully
discharge it from time to time. To discharge your battery leave your phone
switched on until the battery drains completely and the phone turns itself
off. Ignore any messages to recharge your battery and let the battery
completely discharge.
Important: Do not attempt to discharge the battery by any means
other than those just described.
[ 13 ]
• SWITCH ON YOUR PHONE
When the battery is completely charged, you can switch on your phone.
Press and hold the power key
.
Warning: Do not switch on the phone when wireless phone
use is prohibited or when it may cause interference or danger.
• SET UP YOUR HEADSET
The headset provides convenient
handsfree use of the phone.
Connect the headset
When you use the headset,
1
2
Plug the headset jack into the
bottom of your phone.
Put the round ear plug into one
ear.
Use the headset
With the headset connected, you can make, answer and end calls as usual.
Use the keypad to press
make a call.
(talk) or
(end) or to enter numbers to
When you use the headset, the microphone for the headset hangs at the
side of your head. Although the microphone may seem far from your mouth,
you can speak at a normal volume.
• USE THE CARRYING CASE
The carrying case helps protect the phone when you’re not using it.
Nokia recommends that you keep the phone in a case when you’re not
actively using the phone for calls.
[ 14 ]
Set up your phone
Current volume
• ADJUST THE VOLUME
You can change the volume level on your phone,
making incoming voice sounds louder or softer.
•
While in a call, Press
to increase the
volume, and to decrease it.
•
A bar chart appears on the phone’s screen, showing the current
volume level.
• ADJUST SCREEN CONTRAST
You can change the contrast on your phone’s
screen, making the screen brighter or darker.
1
Press Menu 4-3-5 (Menu > Settings >
Phone settings > Display contrast).
A bar chart appears, showing the current
contrast level.
2
3
Press
to increase the contrast, and
to decrease it.
Press OK to confirm your changes, or press Back to leave the contrast
at its current level.
[ 15 ]
4 Review the basics
This section gives you a brief introduction to the phone and shows quick
steps for making, answering, and managing your calls. The rest of this
guide provides complete details on phone use.
• YOUR NOKIA 3361 PHONE
Power key
Infrared port
Earpiece
Screen
Up scroll key
Right selection key
End key
Left selection key
Talk key
Down scroll key
Keypad
Microphone
[ 16 ]
Review the basics
• ABOUT THE ANTENNA
Your phone has a built-in antenna. As
with any other radio transmitting device,
do not touch the antenna unnecessarily
when the phone is switched on.
Back
of phone
Contact with the antenna affects call
quality and may cause the phone to operate at a higher power level than
otherwise needed. Not touching the antenna area during a phone call
optimizes the antenna performance and the talk time of your phone.
Hold the phone to your ear, placing your finger tips on the five raised dots,
which are located below the antenna area on the back of your phone.
Caution: Watch for possible overheating. It is normal for your
phone to become hot during use. If the phone becomes too hot, it
automatically drops the current call and returns to the Start screen.
You won’t be able to make or receive calls until the phone cools.
• MEMORY USE
In your Nokia 3361 phone, Phone book and Reminders share memory
space. When either of these features are used, there is less memory
available for other features. This is especially true with heavy use of some
features. If your use of one or more features takes all of the shared
memory, your phone may display a message saying Memory Full. To
proceed, you would need to delete some of the information or entries
from these features to make additional memory space available.
[ 17 ]
• LEARN THE KEYS
Here is a summary of how to use the keys.
Key
How to use it
Power: Press and hold to switch the phone on or off.
Press briefly to access the list of profiles.
Selection: Press to choose the option shown by the
word above the key (for example, Menu).
Talk: Press to make a call to the name or number
shown on the screen or to answer a call. Press
once at the Start screen to view the first in a list of
numbers you’ve most recently dialed.
Press
to review the list. Press
again to call a
number shown on the list.
End: Press to end a call or to silence the ring from an
incoming call. Also, press to return to the Start screen.
Number: Use keys 2 through 9 to enter numbers and
letters.
-
Press
if you want to insert a blank space while
entering text.
1 Key: Press and hold
to call your voice mailbox.
Symbols: Press to enter special characters, such as
punctuation marks and symbols.
Scroll keys: Press to scroll up or down through a menu
list of options.
[ 18 ]
Review the basics
• MAKE AND ANSWER CALLS
Use this quick guide to make and answer calls.
Switch the
phone on (or
off)
Press and hold the power key
.
Warning: Do not switch on the phone
when wireless phone use is prohibited or
when the phone may cause interference
or danger.
Make a call
1 Hold the phone as you would any other tele-
phone, with the earpiece over your ear and the
microphone near your mouth, or connect and
use the headset.
2 Press number keys to enter a number, including
area code if needed.
3 Press
When your phone rings, press
Press
Press Menu then
.
Answer a call
End a call
.
.
Avoid
unintentional
calls
. A feature called Keyguard
is now on. You cannot accidentally make a call.
Turn Keyguard
off
Press Unlock then
.
[ 19 ]
• CHECK THE START SCREEN
When you switch on your phone, a
welcome appears, then you see the
Start screen.
The Start screen appears when the
phone is idling or standing by.
Start screen
Return to the Start screen
You can easily return to the Start screen from any activity other than an
active call. To do so, press
.
The phone clears (erases) text or information you may have been entering,
except for new text messages, and the screen returns to its standby state,
when you press
.
IN THE START SCREEN
Start screen Your service provider’s name may appear here.
Shows the signal strength of the wireless network where
you are. The higher the bar, the stronger the signal.
Shows the battery charge level. The higher the bar, the
higher the power level in the battery.
Menu
The top level of menu choices on your phone. Press
(left selection key) to enter the menus. Navigate the
menus using the scroll keys.
Names
The entry point for the phone book. Press
selection key) to enter the Names list (after you’ve added
some entries to the phone book).
(right
Indicates that you are in a digital network.
[ 20 ]
Review the basics
Check the menu number and scroll bar
A scroll bar appears on the right side
of the screen when you scroll through
the main menus. The menu number is
located at the top of the scroll bar.
Scroll
barwith
tab
A tab on the bar gives you a visual
representation of your relative position
in the menu structure.
• REVIEW PHONE SYMBOLS
The following is a collection of the various symbols and signals you may
see on your phone.
Symbol What it means
You have an active call.
The phone is waiting for you to enter numbers or text.
You set your ringing tone to Silent.
You’ve activated Keyguard to help prevent any
accidental keypresses.
You have one or more voice messages waiting.
You have one or more unread text messages waiting.
Digital service is available.
Letters you enter will be uppercase (capital letters).
Letters you enter will be lowercase.
Letters you enter will be in sentence case.
Characters you enter will be numbers.
[ 21 ]
Symbol What it means
You are using predictive text. Available when entering
reminder notes, or writing text messages.
You are using predictive text. Characters you enter will
be sentence case.
You are using predictive text. Characters you enter will be
lowercase letters. Press
letters. Press and hold
to switch to sentence case
to switch to numbers, or
press and hold the number you want until it appears.
You can enter only symbols, such as punctuation marks.
Appears when you press and hold the
entering or editing text.
key while
The alarm clock is set.
Lets you know that the picture message has been read.
Lets you know that the picture message has not been read.
Lets you know that you have a reminder which has not
expired.
Lets you know thatyou have a reminder which has expired.
Indicates that you have a note.
[ 22 ]
Review the basics
• USE THE SELECTION KEYS
The two selection keys beneath
the screen access the function
shown above them on the screen.
Left
selection
key
Right
selection
key
•
In this example, pressing the
left selection key when the
word Menu appears above it
shows the first of many
menus. You scroll through the menus using the
and
keys.
•
If you press the right selection key
phone book menu opens.
with Names above it, the
When this guide says, “Press Menu,” it means, “Press the selection key
beneath the word Menu.”
• CHECK IN-PHONE HELP
Your phone provides brief descriptions of all menu options in an “in-phone”
help system.
1
2
Scroll to a menu or submenu option.
Wait about 10 seconds.
A short message appears, describing the option and what it does.
3
Use
to scroll down through the longer descriptions.
Note: Press Menu 4-3-4 (Menu >Settings > Phone settings >
Help texts) to turn the in-phone help system (help texts) on or off.
• BROWSE PHONE MENUS
A menu is a list of choices you can make
to change settings on your phone or use
various phone features. Your phone has
several menus. Each menu can contain
several levels of submenus.
A menu
You can use menus and submenus two ways: by scrolling or by using a
shortcut.
[ 23 ]
Scroll through menus
1
2
3
At the Start screen, press Menu, then scroll through the menus using
the and keys.
Select Options, Select, or OK by pressing the selection key for the
option you want.
Use the scroll and selection keys to navigate the submenus; press
to return to the Start screen.
Use a shortcut
Menus and options are numbered so
that you can quickly find your way
to an option. The numbers appear in
the top right corner of the screen
and show your location in the menu.
Menu
numbers
1
2
Press Menu.
Within 3 seconds, enter the first number of the menu function you
want to access. Repeat until you have entered all the numbers.
For example, to turn on Automatic redial, press Menu 4-2-1-1(Menu >
Settings > Call settings > Automatic redial > On).
TIPS
•You can scroll upward (backward, so to speak) as well as downward
to find some of the most frequently used submenu options.
•You can return to the previous menu level by pressing Back.
•To exit a menu and return to the Start screen, press
. If you
leave a menu by pressing , you cancel any changes you made.
•Some menus may not appear. Ask your service provider for details.
[ 24 ]
Review the basics
• SHORTCUTS
1 MESSAGES
Write message. . . . . . . . . . . . . . . . . . . . . . 01-1
Write e-mail . . . . . . . . . . . . . . . . . . . . . . . 01-2
Chat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01-3
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01-4
Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01-5
Archive. . . . . . . . . . . . . . . . . . . . . . . . . . . . 01-6
Templates. . . . . . . . . . . . . . . . . . . . . . . . . . 01-7
Erase all . . . . . . . . . . . . . . . . . . . . . . . . . . . 01-8
Voice messages . . . . . . . . . . . . . . . . . . . . . 01-9
Listen to voice messages . . . . . . . . 01-9-1
Voice mailbox number . . . . . . . . . . 01-9-2
2
CALL LOG
Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Received calls . . . . . . . . . . . . . . . . . . . . . . . 2-2
Dialed calls . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Clear call lists . . . . . . . . . . . . . . . . . . . . . . . 2-4
All . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4-1
Missed . . . . . . . . . . . . . . . . . . . . . . . . 2-4-2
Received. . . . . . . . . . . . . . . . . . . . . . . 2-4-3
Dialed. . . . . . . . . . . . . . . . . . . . . . . . . 2-4-4
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Duration of last call . . . . . . . . . . . . . 2-5-1
Duration of dialed calls . . . . . . . . . . 2-5-2
Duration of received calls. . . . . . . . . 2-5-3
Duration of all calls . . . . . . . . . . . . . 2-5-4
Life timer . . . . . . . . . . . . . . . . . . . . . . 2-5-5
Clear timers . . . . . . . . . . . . . . . . . . . . 2-5-6
3 PROFILES
Normal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Select . . . . . . . . . . . . . . . . . . . . . . . . . 3-1-1
[ 25 ]
Customize. . . . . . . . . . . . . . . . . . . . . . 3-1-2
Ringing options . . . . . . . . . . . . 3-1-2-1
Ringing tone. . . . . . . . . . . . . . . 3-1-2-2
Ringing volume . . . . . . . . . . . . 3-1-2-3
Vibrating alert . . . . . . . . . . . . . 3-1-2-4
Message alert tone . . . . . . . . . 3-1-2-5
Keypad tones . . . . . . . . . . . . . . 3-1-2-6
Warning tones . . . . . . . . . . . . . 3-1-2-7
Profile name (not available with
Normal profile)
Silent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Meeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Outdoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Pager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
4 SETTINGS
Time settings . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Alarm clock . . . . . . . . . . . . . . . . . . . . 4-1-1
Clock. . . . . . . . . . . . . . . . . . . . . . . . . . 4-1-2
Show/Hide clock. . . . . . . . . . . . 4-1-2-1
Set the time . . . . . . . . . . . . . . . 4-1-2-2
Time format . . . . . . . . . . . . . . . 4-1-2-3
Auto update of date and time . . . . . 4-1-3
On . . . . . . . . . . . . . . . . . . . . . . . 4-1-3-1
Confirm first . . . . . . . . . . . . . . . 4-1-3-2
Off . . . . . . . . . . . . . . . . . . . . . . . 4-1-3-3
Call settings . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Automatic redial . . . . . . . . . . . . . . . . 4-2-1
On . . . . . . . . . . . . . . . . . . . . . . . 4-2-1-1
Off . . . . . . . . . . . . . . . . . . . . . . . 4-2-1-2
Calling card . . . . . . . . . . . . . . . . . . . . 4-2-2
Current call timer . . . . . . . . . . . . . . . 4-2-3
On . . . . . . . . . . . . . . . . . . . . . . . 4-2-3-1
Off . . . . . . . . . . . . . . . . . . . . . . . 4-2-3-2
Phone settings . . . . . . . . . . . . . . . . . . . . . . . 4-3
Language . . . . . . . . . . . . . . . . . . . . . . 4-3-1
[ 26 ]
Review the basics
Touch tones . . . . . . . . . . . . . . . . . . . . 4-3-2
Manual touch tones . . . . . . . . 4-3-2-1
Touch tone length . . . . . . . . . . 4-3-2-2
Welcome note . . . . . . . . . . . . . . . . . . 4-3-3
Help texts . . . . . . . . . . . . . . . . . . . . . 4-3-4
On . . . . . . . . . . . . . . . . . . . . . . . 4-3-4-1
Off. . . . . . . . . . . . . . . . . . . . . . . 4-3-4-2
Display contrast . . . . . . . . . . . . . . . . 4-3-5
Restore factory settings . . . . . . . . . . 4-3-6
Accessory settings. . . . . . . . . . . . . . . . . . . . 4-4
Headset . . . . . . . . . . . . . . . . . . . . . . . 4-4-1
Profile in use with accessory . 4-4-1-1
Automatic answer . . . . . . . . . . 4-4-1-2
Handsfree . . . . . . . . . . . . . . . . . . . . . 4-4-2
Profile in use with accessory . 4-4-2-1
Automatic answer . . . . . . . . . . 4-4-2-2
Lights . . . . . . . . . . . . . . . . . . . . 4-4-2-3
Loopset. . . . . . . . . . . . . . . . . . . . . . . . 4-4-3
Use Loopset . . . . . . . . . . . . . . . 4-4-3-1
Profile in use with accessory . 4-4-3-2
Automatic answer . . . . . . . . . . 4-4-3-3
TTY/TDD . . . . . . . . . . . . . . . . . . . . . . . 4-4-4
Security settings . . . . . . . . . . . . . . . . . . . . . 4-5
Call restrictions . . . . . . . . . . . . . . . . . 4-5-1
Restrict outgoing calls . . . . . . 4-5-1-1
Restrict incoming calls . . . . . . 4-5-1-2
Access codes . . . . . . . . . . . . . . . . . . . 4-5-2
Change security code . . . . . . . 4-5-2-1
1
Network services . . . . . . . . . . . . . . . . . . . 4-6
Voice privacy . . . . . . . . . . . . . . . . . . . 4-6-1
On . . . . . . . . . . . . . . . . . . . . . . . 4-6-1-1
Off. . . . . . . . . . . . . . . . . . . . . . . 4-6-1-2
Network feature setting . . . . . . . . . . 4-6-2
Call forwarding . . . . . . . . . . . . . . . . . 4-6-3
Call waiting . . . . . . . . . . . . . . . . . . . . 4-6-4
Send own caller ID . . . . . . . . . . . . . . 4-6-5
Own number selection . . . . . . . . . . . . . . . . 4-7
1
For information on activating these network services, see “Use
advanced calling features” on page 49.
[ 27 ]
5 SYSTEM
Automatic. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
New search. . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
6
GAMES
7 CALCULATOR
8 REMINDERS
9 INFRARED
10 SERVICES
11 PREPAID
Check account balance . . . . . . . . . . . . . . . 11-1
Add money to account . . . . . . . . . . . . . . . 11-2
Save access phone numbers . . . . . . . . . . . 11-3
Note: The Prepaid menu is visible only when Prepaid service is
available in your network and/or activated on your account. Please
contact your service provider for more information on Prepaid
services.
[ 28 ]
Review the basics
• PHONE BOOK MENU
For access to the phone book and its menus:
•
•
Switch back to the Start screen.
Press Names.
These options are available:
FIND
ADD ENTRY
EDIT NAME
ADD NUMBER
ERASE
One by one
Erase all
OPTIONS
Phone book view
Name list
Name only
Name+number
Memory status
1-TOUCH DIALING
[ 29 ]
5 Add information
This section gives detailed instructions for entering
names, numbers, messages, and other information
into your phone.
•
•
“Store namesandnumbers”startingonpage 38
tells you how to use and manage names and
numbers.
“Communicate with text messages” starting on page 85 tells you how
to send, receive, and manage mobile messages.
• ABOUT ENTERING LETTERS AND NUMBERS
The kind of information you’re entering (names, numbers, or text)
determines which of the three ways that you use to enter information into
your Nokia 3361 phone:
Method
The phone shows
Use for
ABC
for all uppercase letters, Writing names or text.
for all lowercase letters,
for sentence case
isthe default(preset)
method.
or
You can also enter
numbers in this mode
when prompted to enter a
name.
123
for numbers.
Entering numbers.
Predictive
text
for text in messages.
Writing messages and notes.
[ 30 ]
Add information
• ABC AND 123 METHODS
You can enter any combination of numbers and letters into phone book
entries, Web addresses, and more using the ABC and 123 methods.
The phone shows the current method
with an icon, or small picture, in the
upper left corner of the screen.
Current
entry
method
Enter letters
When you are in a name box in the
phone book, the phone shows the
icon. You use the phone’s
keypad to enter letters.
1
2
Find the key with the letter you want to enter.
Press the key repeatedly until the letter appears on the screen.
For example, press three times to enter the letter C.
3
Wait for the blinking cursor to reappear before you enter another
letter, unless the letter is on a different key.
Example: To enter the name Albert:
Press
Press
Press
Press
Press
Press
A
l
b
e
r
t
Note: The default case in Abc mode is sentence case. Only the
first letter of each word is capitalized.
[ 31 ]
Enter numbers
When you are in a number box in the phone book, the phone shows the
icon. To enter numbers, simply press the numbers you want.
When in
mode, you can enter numbers by pressing the key multiple
times until the number shows up, or you can press and hold the key. The
method used to enter numbers depends on the type of information you
are entering.
Enter punctuation and other characters
Depending on the language selected for your phone, the following
characters may be available:
Key
Characters
. , ‘ ? ! @ ~ / “ - 1
A B C 2
Key
Characters
P Q R S 7
T U V 8
D E F 3
W X Y Z 9
G H I 4
Space, 0
J K L 5
Press for symbols.
Changes letter case.
M N O 6
Note: Some networks may not support all language-dependent
characters.
ENTER SPACES AND PUNCTUATION
•
•
•
Press
Press
Press
to enter a space between words.
briefly while in
to enter a period.
to show special characters. A screen appears with the
available special characters.
Use the scroll keys to select the character you want, then press Insert.
[ 32 ]
Add information
ERASE MISTAKES
If you make a mistake:
•
•
Press
to erase one character to the left.
Press Clear as needed to erase more than one character.
CHANGE LETTER CASE
•
To switch between uppercase and lowercase letters, press
.
The
icon switches to
, showing you are using lowercase
letters.
•
To enter a number while in letter mode, press and hold a key until the
key’s number appears on the screen.
Use special characters in names and phone numbers
Your phone has specials characters, symbols and punctuation that are
available when writing text.
Note: The list of special characters may change depending on
your service provider.
IN ABC
1
Press
A screen appears with the available symbols.
Use and to move to the character
.
2
you want, then press Insert.
Note: For faster scrolling when viewing special characters, you
can use the 2 (up), 8 (down), 4 (left) and 6 (right) keys.
IN 123
The
key inserts the following characters when you are prompted to
until the character you want appears:
enter a phone number. Press
[ 33 ]
*
This character sends command strings to the
network. Contact your service provider for
details.
+
p
This character is used to link a 1-touch dialing
location to the number currently being entered.
This character creates a pause that occurs when
the phone dials a number. Numbers entered to the right of this special
character are automatically sent as touch tones after a 2.5-second pause.
w
This character causes the phone to wait for you to press Send.
• WRITE WITH PREDICTIVE TEXT
When you’re writing text messages on your
phone, you can use the predictive text method
of entering information. With predictive text,
you press each number key once for each letter.
The phone will try to identify what you are
writing based on the words already stored in
your phone’s memory.
The word shown on the screen changes after each keystroke (as shown in
the example that follows). Since it’s easy to get confused, you should try to
disregard the word you’re writing until you have entered all the characters.
Example: To write Nokia with predictive text turned on:
What you press
Press
What you see
O
Press
On
Press
Onl
Onli
Nokia
Press
Press
[ 34 ]
Add information
Keys and tools for predictive text
Key
Purpose
Keys with
letters
Use for word entry. Press each key only once for each
letter.
Press to view the next matching word if the underlined
word is not the word you intended. To change the
underlined word, press
repeatedly until the word
you want appears. You may also, press and hold this key
for a list of symbols.
Spell
If predictive text doesn’t recognize a word, you see
Spell above the left selection key. Press Spell, enter the
word you want to enter, and press Save.
Press once to accept a word and add a space.
Press and hold to enter a number. You see the
icon on the screen. Press and hold
text letters.
again to write
Clear
160
Press once to delete the character to the left of the cursor.
Press to add a punctuation mark.
Press once quickly to switch the letter case.
indicates uppercase.
indicates lowercase.
The maximum number of characters available. The
character counter appears in the top right corner of the
screen and counts down for each character you add.
[ 35 ]
Turn on predictive text input
1
2
3
4
5
Press Menu, then press Select.
When Write message appears, press Select.
Press Options, scroll to Predictive text and press Select.
Scroll to the language you want (for example, English).
Press Select.
T9 prediction on appears. (T9 is the technical name for predictive text
input.) This means you can use the predictive text method to enter
messages. In the text message window where you write, the predictive
text icon
pressing
twice.
Turn off predictive text input
1
Repeat steps 1 through 5 in the section immediately above.
2
Scroll to T9 prediction off and press Select.
Tips for predictive text
INSERT A SYMBOL
1
Press
and hold.
The symbol screen appears, showing the list
of special characters. For more information
on special characters see “Enter spaces and
punctuation” on page 32.
2
Scroll to the symbol you want and press Insert.
CHECK A WORD
When you’ve finished writing, make sure the underlined word is the word
you intended to write.
[ 36 ]
Add information
If the word is correct:
•
•
•
Insert a punctuation mark, if needed.
Press to confirm the change and enter a space.
Start writing the next word.
If the word is not correct:
•
Press
then press
repeatedly until the word you want appears, and
to confirm it.
OR
•
•
Press Options, scroll to Matches, then press Select. Scroll to the
correct word and press Use.
Start writing the next word.
When you enter a period to end a sentence, the phone switches to
sentence case so that the first letter in the next word will be uppercase.
ADD A WORD TO THE PREDICTIVE TEXT DICTIONARY
If the word Options changes to Spell, the word you intended to write is
not in predictive text. You can add the word to predictive text.
1
2
Press Spell and enter the word(s) using standard text entry.
Press Save to save the word(s).
INSERT NUMBERS
1
To add a number to the message, press and hold
appears on the screen.
until
to return to
2
Enter the numbers you want, then press and hold
the
method.
WRITE COMPOUND WORDS
1
2
Write the first part of the word and press
to accept that part.
to enter the
Write the last part of the compound word and press
word.
[ 37 ]
6 Store names and numbers
Your phone includes a phone book that
can store up to 200 entries (names and
associated phone numbers). In addition,
the phone book can store up to two
numbers per name and a text entry,
such as a postal address or an e-mail
Phone book
address.
•
An entry in the phone book can consist of a number only or a name
and a number.
•
You cannot enter the same name twice. If you try to save a name that
is already in the phone book, the phone asks if you want to add the
number to an existing name.
Note: This feature shares memory space with other features. See
“Memory use” on page 17 for more information.
• OPEN THE PHONE BOOK
There is more than one way to view the names in your phone book:
•
•
•
Press Names, select Find, enter the name, then press Find.
Press Names, select Find, press List, then scroll through the names.
At the Start screen, use
and
to scroll through the names.
• SAVE NAMES AND NUMBERS
You have more than one option for saving names and numbers.
Quickly save a number and name
This method is called quick save.
1
2
Enter the phone number using the keypad.
Press Options, then select Save.
[ 38 ]
Store names and numbers
3
4
Enter a name and press OK.
Press Done to return to the Start screen.
Save an entry using the names menu
1
2
3
4
5
Press Names to enter the phone book.
Scroll to Add entry and press Select.
Enter a name and press OK.
Enter a number and press OK.
Press Done to return to the Start screen.
• SAVE A TEXT ENTRY WITH A
NAME
Once you have added a contact to your phone
book, you can add an e-mail address, a mailing
address, or a note to that contact.
Note: Text entries can only be added to existing contacts.
For instance, you cannot enter an e-mail address until you
have selected a name to add the address to.
1
2
3
4
Find the name to which you want to add text.
Press Details, then press Options.
Scroll to Add text, then press Select.
Scroll to the text type you would like to add (E-mail, Street addr., or
Note), then press Select.
5
6
Enter the text, and press OK.
Press
to return to the Start screen.
• RECALL INFORMATION
You can recall numbers from the phone book several different ways.
[ 39 ]
Recall numbers from the phone book
1
2
3
At the Start screen, press Names.
Select Find and enter the name you need.
Press Find, then press
.
You may have to scroll to the appropriate entry in a list if you have
stored names that are similar to each other.
Recall information with shortcuts
You may want to use some of these shortcuts, or alternate methods for
recalling a number.
•
•
•
Press Names, enter the first letter of the name, scroll to the name, and
press
.
At the Start screen, press the scroll keys to enter your list of names,
scroll to the name you want, and press
.
Press to access a list of your last ten dialed calls, scroll to the one
you want to dial, and press again.
• USE PHONE BOOK MENUS
The phone book has several menus from which you can choose. These menus
appear when you press Names. Use the scroll keys to move to the menu
you want to use.
Find
Allows you to search for a specific entry.
Add entry
Allows you to add a new contact to your phone
book.
Edit name
Allows you to edit an existing contact.
Add number
Allows you to add a number to an existing name
in the phone book.
[ 40 ]
Store names and numbers
Erase
Allows you to erase names and numbers one by
one or all at once.
Options
Takes you to a new menu list which includes the
phone book’s memory status and scrolling view.
1-touch dialing Allows you to assign up to eight keys for speed
dialing.
Change phone book views
You can view your phone book in three different ways:
Name list
Shows all the names that are stored in your phone
book. Three names appear on the screen at a time.
Name only
Displays individual names only. You can view the
corresponding phone number by pressing Details
and then scrolling up or down.
Name+number
Shows individual names and numbers. Only one
name and its corresponding number appears on
the screen at a time.
In all views, you can use the scroll keys to move up and down through the
list of names.
To change the way you view names and numbers in your phone book:
1
2
3
4
Press Names.
Scroll to Options and press Select.
At Phone book view, press Select.
Scroll to the view you want and press Select.
[ 41 ]
• EDIT A NAME OR NUMBER
You can edit a name, a number, or both.
1
2
3
4
Recall the name or number you wish to edit.
Press Details, then press Options.
Scroll to Edit number or Edit name and press Select.
Edit the name or number and press OK.
• ERASE STORED NAMES AND NUMBERS
Erasing stored names and numbers removes them from your phone.
Once you erase an item, you can restore it only by re-entering it.
1
2
3
Recall the phone book entry you want to erase.
Press Details, then press Options.
Scroll to Erase, and press Select.
The message Erase all details? appears.
Press OK.
4
OR
1
Press Names, scroll to Erase, and press Select.
Scroll to One by one and press Select.
2
You see your list of names.
3
4
Scroll to the entry you want to delete and press Erase.
When the message Erase all details? appears, press OK.
• ERASE THE ENTIRE PHONE BOOK
These steps erase all contacts in your phone book.
1
2
3
4
Press Names, scroll to Erase, and press Select.
Scroll to Erase all and press Select.
When you see the message Are you sure?, press OK.
Enter your security code and press OK.
[ 42 ]
Store names and numbers
• ADD A SECOND NUMBER TO A NAME
You can add a second number from the phone
book, the Start screen, name recall or number
type. Once you choose to add a number to an
existing name, you can select one of the
following number type locations in which to
store the second number: General, Mobile,
Home, Work, or Fax.
From the phone book
1
2
3
Press Names, scroll to Add number, and press Select.
Scroll to the name where you will add the number and press Add no.
Scroll to the type of number you are adding (General, Mobile, Home,
Work or Fax), and press Select.
4
Enter the number and press OK.
From the Start screen
1
2
3
4
Enter the phone number using the keypad.
Press Options.
Scroll to Add to name and press Select.
Scroll to the name to which you want to add the number and press
Add no.
5
Scroll to the desired number type and press Select.
By recalling the name
1
2
3
4
5
Recall the name to which you would like to add a second number.
Press Details, then press Options.
Scroll to Add number, then press Select.
Scroll to the desired number type and press Select.
Enter the number and press OK.
[ 43 ]
Change the number type
Once you have saved a name with two numbers, you can change the number
type for either of the phone numbers. (For example, you can change the
type if you saved a number as General and you want to change it to Home.)
1
2
3
4
Recall the name from the phone book.
Press Details, then scroll to the number you want to change.
Press Options, scroll to Change type, and press Select.
Scroll to the number type you would like and press Select.
Specify a primary number
If any names in your phone book have multiple numbers, it’s a good idea
to specify the number that you dial most often for that name as the
primary number. By assigning the most-used number as primary, you
are telling the phone to dial that number when you select the name for
dialing—a great time saver when you dial names with two numbers.
1
2
Recall the name for which you want to select a primary number.
Press Details, then scroll to the number you want to set as the primary
number.
3
Press Options, scroll to As primary no., and press Select.
• CHECK MEMORY STATUS
You can check what percentage of your phone book’s memory is free and
what percentage has been used.
1
2
3
Press Names and scroll to Options.
Press Select.
Scroll to Memory status and press Select.
[ 44 ]
Check call history
7 Check call history
Your phone provides a call log that registers
information about calls you make and receive.
The call log keeps track of:
•
•
•
•
Missed calls
Numbers you’ve dialed
Numbers from which you’ve received calls
Amount of time you’ve spent on calls
• CHECK MISSED, RECEIVED, OR DIALED CALLS
1
2
Press Menu 2 (Menu > Call log) to go to the call log, then press Select.
Use and to move to Missed calls, Received calls, or
Dialed calls.
3
Press Select at the submenu you want.
For missed, received, and dialed calls, a phone number (or the name
associated with a number in the phone book) appears.
4
Use
press Options.
and
to scroll to the number or name you want, then
For missed, received, and dialed names or numbers, you have the choices
shown in the list shown below.
5
Scroll to the option you want, then press Select.
Shows the time and date when the call was connected.
(You must first set the phone’s clock)
Call time
Send message
Allows you to write and send a text message to numbers
listed in the call log
View number Allows you to view the number.
Edit number Allows you to edit the number shown on the screen
[ 45 ]
Save
Saves the number in your phone book
Adds the number to a name you’ve already entered in
your phone book
Add to name
Erase
Call
Removes the number from the call log
Activates a call to the number
Tip: To dial any number that appears on your phone’s screen,
press
.
MISSED CALLS
Your phone stores the last ten numbers for calls you missed. When you miss
a call(s), the message Missed calls appears on the screen with the number
of calls missed.
You are notified of missed calls only if your phone was turned on in the
original service area of your service provider.
Note: If you chose the Forward if not answered option in Call
Forwarding, your phone treats these forwarded calls as missed calls.
DIALED CALLS, RECEIVED CALLS
Your phone stores the last ten numbers for calls you’ve dialed or received.
• CLEAR CALL LISTS
Your phone uses call lists to track numbers for incoming, outgoing, and
missed calls. You can erase some or all of the numbers that appear in the
call log.
Caution: You cannot undo this operation.
1
2
Press Menu 2-4 (Menu > Call log > Clear call lists).
Use or to scroll through the options list.
The list includes: All, Missed, Received, and Dialed.
3
Stop at the appropriate option and press Select.
[ 46 ]
Check call history
The All option clears every number in every list, whereas the other
options clear only the numbers associated with that option. For example,
the Dialed option clears only the numbers associated with calls you
previously dialed.
• CHECK CALL TIMERS
Your phone uses call timers to track the amount of time you spend on
each call. You can review phone use by checking the phone’s call timers.
1
2
Press Menu 2-5 (Menu > Call log > Call timers).
Use or to scroll through the following options:
Shows the time used for the last call made
Durationof
last call
Durationof Shows the time used for all outgoing calls since you reset
dialed calls the timers
Durationof Shows the time used for all received calls since you reset
received
calls
the timers
Durationof Shows the time used for all calls that have been made
all calls
and received since you reset the timers.
Shows the time used for all calls for the life of your phone.
This option cannot be reset.
Life timer
Clears (erases) all call timers for the currently selected
phone number. Your phone includes separate timers for
each number used, with the exception of the life timer.
Clear
timers
Caution: If you select the Clear timers option, the action cannot
be undone. If you use the call timers to log the amount of time
spent on calls, you may want to record the information in the call
timers before you clear them.
[ 47 ]
Note: The actual invoice for calls and services from your service
provider may vary, depending upon network features, rounding-off
for billing, taxes, and so forth.
• TURN ON A CURRENT CALL TIMER
You can set your phone to show the running elapsed time while a call
is active.
1
Press Menu 4-2-3 (Menu > Settings > Call settings > Current
call timer).
2
Scroll to On and press Select.
From this point on, the timer is active during each call you make or
receive. The time appears on the phone’s screen.
3
After a call has ended, press any key on your phone to clear the
current call time from the screen.
• CLEAR CALL TIMERS
1
Press Menu 2-5-6 (Menu > Call log > Call timers > Clear timers).
The Security code box appears.
2
Enter your security code and press OK.
[ 48 ]
Use advanced calling features
8 Use advanced calling features
This chapter describes advanced calling features such as conference calling,
call waiting, and credit cards for calls. Not all features described here are
available in all wireless network systems.
• SET IN-CALL OPTIONS
Your phone allows you to use a number of features during a call. These
features are known as in-call options.
Note: Many in-call options are network services features. To use
these options, you must contact your service provider.
You cannot use all these options at all times. This section tells you when
you can use a certain option.
1
2
To access an option during a call, press Options.
Choose from the following options.
Touch tones Allows you to manually enter a touch tone string
(series of tones) or search for a string in your phone
New call
Allows you to create a new call while in a call
End all calls Ends all active calls
Names
Menu
Allows you to use the phone book. Once you open
the phone book, pressing will not close the
phone book, but it will end the current call
Takes you to the main menus
Mute/
unmute
Mutes the phone’s microphone. If your phone’s
microphonehas alreadybeen muted, Unmuteappears
instead of Mute. Press Select to choose either of
these options.
These options can affect the microphones of any
accessories connected to the phone.
[ 49 ]
• USE CALL WAITING
If you have call waiting, your phone beeps during a call to let you know
that someone else is calling you. Depending on your caller ID setup, the
phone might also show the number of the incoming call.
Call waiting is not available in all wireless systems. Before you can use call
waiting, you must contact your service provider to make sure this feature
is available and turned on for your phone. Then you may need to activate
the call waiting feature.
Store the call waiting feature code
1
Press Menu 4-6-2 (Menu > Settings > Network services > Network
feature setting).
2
3
4
Enter the feature code your service provider gave you and press OK.
Scroll to Call waiting and press Select.
Make sure that Activate is highlighted and press Select.
Activate call waiting
1
Press Menu 4-6-4-1 (Menu > Settings > Network services > Call
waiting > Activate).
2
Press Select.
Manage calls
Call waiting works with both local and long distance calls.
•
•
•
To answer an incoming call, press
.
To switch from one call to another, press
.
To end both calls, press
.
[ 50 ]
Use advanced calling features
Make a conference call
While in a call, you can call another number and “conference in” (add) a
third party to the call.
The conference call feature varies based on wireless systems. Contact your
service provider for details.
1
While in a call, you can either dial the number you want to conference
in and press
OR
.
Press Options, scroll to New call, press Select, enter the phone number,
and press Call.
If you don’t remember the number of the party you want to include
in the conference and you know that this number is in your phone
book, you can recall the number.
2
3
When the third party answers, press
to connect all three parties.
again.
To place one of the parties on hold, press
If you press
a third time, the party you placed on hold rejoins the
call, and the second party is placed on hold. Once you place one of the
parties on hold, you are unable to rejoin all three parties.
4
To drop all parties, press
.
Look up a number during a conference call
If you don’t remember a number that you need to call while in another
call and you know that this number is in your phone book, you can recall
the number without having to end the current call.
1
2
3
4
5
During the call, press Options.
Scroll to Names and press Select.
Press Select at Find.
Enter a name and press Find, or scroll through the phone book.
Press Details.
[ 51 ]
• USE CALL FORWARDING
When you use call forwarding, your network redirects incoming calls to
another phone number.
The call forwarding feature is not available in all wireless systems. Contact
your service provider for details and availability.
Important:Call forwarding is a network-dependent feature and
may not work the same in all networks. Contact your service
provider for availability and for your network’s feature codes.
Learn about call forwarding feature codes
Your network requires separate codes for activating and cancelling the
various types of call forwarding. Your carrier should provide you with the
necessary feature codes for these network services.
Once you store these feature codes in your phone, they are sent automatically
to the network when you select one of the call fowarding options from
your phone’s menu.
Your phone can store the following types of feature codes:
Feature code type
Forward all calls
Forward if busy
Description
Forwards all incoming calls.
Forwards calls only when you’re on your phone.
Forwards calls if you don’t answer.
Forward if not
answered
Forward if out
of reach
Forwards calls if you are out of reach of your
wireless network or if your phone is turned off.
Cancel all call
forwarding
Cancels all forwarding options that are
currently active.
[ 52 ]
Use advanced calling features
Store the call forwarding feature code
1
Press Menu 4-6-2 (Menu > Settings > Network services > Network
feature setting). The Feature code box appears.
2
3
4
Enter the feature code your service provider gave you, then press OK.
Use
or
to scroll to Call forwarding and press Select.
Scroll to the type of forwarding that matches the feature code you
entered, then press Select.
5
Make sure that Activate is highlighted and press Select.
Activate/cancel call forwarding
1
Press Menu 4-6-3 (Menu > Settings > Network services >
Call forwarding).
2
3
4
Scroll to the desired call forwarding option, then press Select.
Highlight Activate and press Select.
In the Number box, either enter the number to which you want your
calls forwarded (or press Find to recall a number from the phone book).
5
Press OK.
Your phone calls the network to activate (or cancel) the feature you’ve
requested. The network sends a confirmation note when the feature has
been activated (or cancelled) successfully.
• REDIAL AUTOMATICALLY
There are times when you may not be able to place a call (example: due
to the high volume of traffic on the wireless network). When the wireless
system is busy or unavailable, Automatic redial instructs your phone to
retry the call.
ACTIVATE AUTOMATIC REDIAL
1
Press Menu 4-2-1 (Menu > Settings > Call settings > Automatic
redial).
2
Scroll to On and press Select.
[ 53 ]
If the system is busy, your phone makes 3 additional call attempts. If you
want to stop the automatic redial process prior to the last attempt, press
.
Important: This feature does not automatically redial a number
when the number you are calling is busy.
• USE A CALLING CARD
You can use a calling card when you dial long distance calls. First you must
store your calling card information in the phone. Your phone can store
information for a maximum of four calling cards.
Save calling card information (step 1)
1
2
3
4
5
Press Menu 4-2-2 (Menu > Settings > Call settings > Calling card).
Enter your security code and press OK.
Scroll to card A, B, C or D and press Options.
Scroll to Edit and press OK. At Dialing sequence, press Select.
Use
or
to scroll through the list of dialing sequences, as
described in the following list.
Dialing sequence
Use for cards that require you to
Access number
+ phone number
+ card number
Dial 1-800 access number, then phone number,
then card number (+ PIN if required).
Access number
+ card number
+ phone number
Dial 1-800 access number, then card number
(+ PIN if required), then phone number.
Prefix
+ phone number
+ card number
Dial the prefix (any numbers that must precede
the phone number) and phone number you want
to dial, then card number (+ PIN, if required).
6
Press Select.
[ 54 ]
Use advanced calling features
Save calling card information (step 2)
The order of the following steps may vary, depending on which dialing
sequence your card uses.
1
2
When prompted for the calling card’s access number, enter the number
and press OK. This number is usually the 1-800 number that is listed on
the calling card.
When prompted to enter a calling card number and PIN number, enter
the number, and press OK. Press OK again when the Save changes?
message appears.
3
4
Use
or
to scroll to Card name, press Select, and enter the
card name using your phone’s keypad.
Press OK.
Choose a calling card to use
If you have more than one calling card, you’ll need to choose one before
making a call.
1
2
3
4
Press Menu 4-2-2 (Menu > Settings > Call settings > Calling card).
Enter your security code and press OK.
Scroll to the desired card and press Options.
Scroll to Select and press OK.
Make a calling card call
1
Enter the phone number, including any prefix (such as 0 or 1) that
may be needed.
2
Press and hold
and then Wait for tone, then press OK.
until your phone displays the message Card call
3
4
When you hear the tone from your calling card service, press OK.
After the tone, your phone displays the message Wait for tone, press
OK again. Press OK.
Note: This procedure might not apply to all the calling card
options that are programmed into your phone. Check your calling
card for more information, or contact your long distance company.
[ 55 ]
• SEND YOUR OWN NUMBER IN CALLER ID
You can determine, for each call you make, whether your telephone number
appears on another phone’s caller ID.
In most service areas, when you call others, your name is presented to their
caller ID (if they subscribe). With Send own caller ID, you can block or
send the display of your number when you make a call.
Note: Send own caller ID might not be available in your wireless
system. Contact your service provider for details and availability.
Also note that this feature is effective only when you call a number
that is equipped with caller ID.
Before you can use Send own caller ID, you must first store its feature code.
Otherwise, this feature might not appear on your phone’s menu.
Store the feature code
1
Press Menu 4-6-2 (Menu > Settings > Network services > Network
feature setting).
The Feature code box appears.
2
3
4
Enter the feature code your service provider gave you and press OK.
Use
or
to scroll to Send own caller ID and press Select.
Highlight Yes and press Select.
Set the send own number feature
1
Press Menu 4-6-2-3 (Menu > Settings > Network services >
Network feature setting > Send own caller ID).
2
3
4
Scroll to Yes (to show your number) or No (not to show it).
Press Select.
Enter the number you wish to call (or press Find to retrieve the number
from the phone book), and press OK.
[ 56 ]
Use advanced calling features
• SELECT A PHONE NUMBER
When you first activate your phone, your service provider programs the
phone number and system information into your phone’s memory. The
number assigned to your phone provides service for only one service area.
Your phone can be activated in up to three different service areas, however.
For example, your phone could be activated in Dallas, Toronto, and New
York. Each service area would assign a different phone number or account
to your phone.
You must select a phone number for your home system, and if you travel
outside your home system, you can choose another number. Only one phone
number can be active at a time.
Note: It might not be necessary to have up to three numbers for
your phone if your service provider has service or roaming agreements
for each area in which you wish to use your phone. Contact your
service provider for details.
Select the phone number
1
Press Menu 4-7 (Menu > Settings > Own number selection).
2
Scroll to the phone number you want to use and press Select.
The first phone number on this list is the currently selected number.
You need at least one active number to make calls.
• SET TOUCH TONES
Touch tones are sounds that are produced when you press the keys on your
phone’s keypad. Sometimes, touch tones are called DTMF tones.
You can use touch tones for many automated over-the-phone services
such as checking bank balances and airline schedules and using your voice
mailbox. Those features depend on operator’s availability. Touch tones can
be sent only when a call is active.
[ 57 ]
Set manual touch tones
1
Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch
tones > Manual touch tones).
2
Select one of the following options, then press Select:
Continuous Tone sounds for as long as you press and hold a key
Fixed
Sets the tone length to 0.1 second, regardless of how
long you press a key
Off
Turns off the tones. No tones are sent when you press
a key
Set touch tone length
You can also set the length of each touch tone.
1
2
3
Press Menu 4-3-2-2 (Menu > Settings > Phone settings > Touch
tones > Touch tone length).
Use
or
to scroll to Short or Long. Short sets the tone length
to 0.1 second. Long sets the tone length to 0.5 second.
Press Select.
Store touch tone sequences (strings)
You can store touch tone strings the same way that you store names and
numbers in your phone book. You can store an entire sequence of digits
and send it as touch tones for frequently used strings of numbers.
STORE TOUCH TONE STRINGS WITH PHONE NUMBERS
1
Enter the phone number that you want associated with a touch tone.
2
Press w or p where needed.
w (wait): When you dial this phone number, your phone first dials the
number, then waits (because of the w character) for you to press
Send. When you press Send, the phone sends your touch tone.
p (pause): If you include a p character instead of a w, your phone
pauses for 2.5 seconds and then automatically sends the touch tone.
[ 58 ]
Use advanced calling features
3
4
Enter the touch tone string.
Store the number as you normally would.
SEND A TOUCH TONE STRING
1
Press Menu 4-3-2-1 (Menu > Settings > Phone settings > Touch
tones > Manual touch tones).
2
Make sure that the setting is not set to Off.
If it is, use
or
to scroll to one of the other options and press
Select.
3
4
Then, during your call, press Options, scroll to Touch tones and
press Select.
Enter the touch tone string or recall the string from the phone book,
and press Tones.
Warning: If you send touch tones while in the analog mode, be
careful not to send confidential information.
[ 59 ]
9 Use voice mail
Voice mail provides a way for callers who miss
you to leave a message that you can retrieve later.
To use voice mail, you must sign up for the feature
with your wireless service provider.
• CHECK FOR MESSAGES
Your phone beeps when you receive a voice message. Also, the message
New voice message appears on your phone’s screen, along with the
icon.
If you receive more than one voice mail message, your phone may show the
number of messages that you have received. Wireless network provider
determines the final format.
Note: To use voice mail, you need to learn the voice mail system’s
various greetings, passwords, and prompts. Your service provider
can provide instructions.
• SET UP YOUR VOICE MAILBOX
As part of your network’s voice mail feature, your service provider gives
you a voice mailbox phone number. Save this number in your phone to
make getting your voice messages quick and convenient.
1
Press Menu 01-9-2 (Menu > Messages > Voice messages > Voice
mailbox number).
2
3
Enter your voice mailbox phone number.
Press OK.
Your voice mailbox number can be up to 32 digits long and is used until
you change it. Therefore, if your phone number changes, the voice mail
number will probably change also. For further information, contact your
service provider.
[ 60 ]
Use voice mail
• SET GREETINGS
Voice greetings may vary in different wireless systems. If you need
information about how to record your greeting, contact your service
provider.
• LISTEN TO YOUR VOICE MESSAGES
The way you listen to your voice messages depends on your service provider.
Call your service provider if you have any questions.
1
When your phone alerts you to new voice messages, press Listen and
follow the instructions given on the phone.
2
3
If you’d rather listen to your messages later, press Exit.
To listen to your voice messages:
Press and hold
OR
.
Press Menu 01-9-1 (Menu > Messages > Voice messages > Listen
to voice messages).
Follow the prompts to review your messages.
[ 61 ]
10 Personalize rings and tones
• WHAT IS A PROFILE?
A profile is a group of settings you can use to
customize the way your phone works. You can
set your own preferences for these items:
Ringing options
Ringing volume
Ringing tone
Vibrating alert
Keypad tones
Profile name
Warning tones
Message alert tone
Your phone comes with five profiles:
Normal (default setting) Outdoor
Silent
Pager
Meeting
• SELECT A DIFFERENT PROFILE
1
2
Quickly press the Power key.
Use and to move to the profile you want to use.
Profile names are highlighted as you scroll through them.
3
Press Select to select a profile.
Note: You can also change your profile under the Profiles menu.
To access this menu, press Menu 3 (Menu > Profiles).
• CUSTOMIZE A PROFILE
1
2
3
Press Menu 3 (Menu > Profiles).
Scroll to the desired profile in the list and press Select.
Select Customize to view the options for the selected profile.
Note: When you change a setting in the current profile, it affects
only that profile. Your phone’s normal settings do not change.
[ 62 ]
Personalize rings and tones
Set ringing options
You can choose the type of ring your phone uses to notify you of an incoming
call. This setting does not affect any incoming text message alert tones.
1
Press Menu 3 (Menu > Profiles).
Your phone lists each profile.
2
Use
or
to scroll to the desired profile in the list for which
you want to set the ringing options, and press Select.
3
4
5
Scroll to Customize and press Select.
Scroll to Ringing options and press Select.
Scroll to one of the ringing options, as described below, and press Select.
Ring
Ascending
The phone rings normally.
Ringing volume increases (gets louder) if the phone
is not answered.
Ring once
Beep once
Silent
The phone rings once to indicate an incoming call.
The phone beeps once to indicate an incoming call.
The phone makes no sound.
Set the ringing tone
The ringing tone is the sound your phone makes when you receive a call.
You can set the ringing tone to a specific sound or tune to personalize how
the phone rings.
Note: If you have already chosen a ringing option of either Silent
or Beep once, the ringing tones are already turned off. See “Set ringing
options” on page 63 for details.
1
2
Press Menu 3 (Menu > Profiles). Your phone lists each profile.
Use or to scroll to the profile for which you want to set the
ringing tone.
3
Press Select.
[ 63 ]
4
5
6
Scroll to Customize and press Select.
Scroll to Ringing tone and press Select.
Scroll through the options, and when you hear the tone you want to
use, press Select.
Set the ringing volume
You can set the default ringing volume for incoming voice calls and message
alert tones.
1
2
3
4
5
Press Menu 3 (Menu > Profiles).
Use or to scroll to the profile you will set, and press Select.
Highlight Customize and press Select.
Scroll to Ringing volume and press Select.
Scroll through the options. When you hear the right volume level,
press Select.
Note: As you scroll through the ringing options, you can listen to a
sample of each.
Set a vibrating alert
You can have your phone vibrate to indicate an incoming call.
1
2
Press Menu 3 (Menu > Profiles).
Use or to scroll to the profile for which you want to change
the vibrating alert, and press Select.
Select Customize and press Select.
Scroll to Vibrating alert and press Select.
3
4
5
Use
or
to scroll to On or Off and press Select.
The phone does not vibrate when it is connected to or placed in any
charging device.
[ 64 ]
Personalize rings and tones
Set the message alert tone
You can set your phone to use a certain tone to indicate an incoming text
message.
1
2
Press Menu 3 (Menu > Profiles).
Use or to scroll to the profile for which you want to set
the message alert tone, and press Select.
3
4
5
Select Customize and press Select.
Scroll to Message alert tone, then press Select.
Use
or
to scroll through your choices.
The phone plays samples of each choice as you scroll to it.
6
When you find the tone you want, press Select.
Set keypad tones
Keypad tones set the volume of the tone you hear when you press your
phone’s keys.
1
2
Press Menu 3 (Menu > Profiles).
Use or to scroll to the profile for which you want to set
the keypad tones, and press Select.
Select Customize and press Select.
Scroll to Keypad tones and press Select.
3
4
5
Use
or
to scroll to one of the levels and press Select. If you
choose Off, no keypad tones are heard.
Set warning tones
You can set warning tones in your phone. Warning tones include the sounds
your phone makes during error conditions, during confirmations, when a
battery is low, and when you need to recharge the battery.
1
2
Press Menu 3 (Menu > Profiles).
Use or to scroll to the profile for which you want to set
the warning tones, and press Select.
[ 65 ]
3
4
5
Select Customize and press Select.
Scroll to Warning tones, then press Select.
Scroll to On and press Select.
If you do not want to use warning tones, you can turn them off by
scrolling to Off and pressing Select.
• RENAME PROFILES
You can rename any of the profiles except Normal. You may want to use
your own name for one of the profiles. When you do, your name appears on
the Start screen.
1
2
3
4
Press Menu 3 (Menu > Profiles).
Use or to scroll to the desired profile and press Select.
Select Customize, scroll to Profile name and press Select.
Enter the new name and press OK.
Note: You cannot rename the Normal profile.
[ 66 ]
Personalize phone settings
11 Personalize phone settings
You can change certain settings so that your phone suits your own needs
and lifestyle. Changes you can make include changing the language on
the screen, showing or hiding the clock, and setting up 1-touch dialing.
• SET THE LANGUAGE
You can set your phone to use a certain language.
Your possible choices are English, French, Spanish, Portuguese, Russian,
Hebrew, Ukrainian, and Chinese. Languages vary in different regions.
All these languages may not be available in your phone.
1
2
Press Menu 4-3-1 (Menu > Settings > Phone settings > Language).
Use or to scroll to the language you want to use and
press Select.
• SET AND DISPLAY THE CLOCK
Your phone has an internal clock that you can
set to appear on the phone’s screen. The clock is
connected to an alarm clock. See “Set the alarm
clock” on page 100 for details.
Clock
Set the clock
1
Press Menu 4-1-2 (Menu > Settings >
Time settings > Clock).
2
3
Use
or
to scroll to Set the time and press Select.
Enter the time using a 00:00 format and press OK. For example, to set
your clock to 9:30, enter 09:30. If you set the time format for 24-hour
time, enter the number the same way: 09:30 or 21:30.
•
If you set time format to am/pm, use
or
to scroll to am
or pm and press Select.
•
If you set the time format to 24-hour, the time is set as soon as
you press OK after adjusting the time.
[ 67 ]
Show the clock on the Start screen
1
Press Menu 4-1-2 (Menu > Settings > Time settings > Clock).
To show the clock, scroll to Show clock and press Select.
Select Hide clock if the clock is showing and you don’t want to see it.
2
Select the time format
You can change the way your clock shows the time, whether in am/pm
(12-hour) or 24-hour format.
1
2
3
Press Menu 4-1-2 (Menu > Settings > Time settings > Clock).
Use
Use
or
or
to scroll to Time format and press Select.
to scroll to either am/pm or 24-hour and press Select.
• SET THE CLOCK TO BE UPDATED BY THE NETWORK
You can set your phone’s clock to be updated by the network, if available.
Turn on the network date and time update
1
Press Menu4-1-3 (Menu > Settings > Time settings > Auto update
of date and time), then press Select.
2
Scroll to On or Confirm first, then press Select.
If you choose Confirm first, you will receive the message Update date
and time of the phone? before the phone’s clock is updated. Select
OK to accept the update or Back to reject it.
Turn off the network date and time update
1
Press Menu4-1-3 (Menu > Settings > Time settings > Auto update
of date and time), then press Select.
2
Scroll to Off, then press Select.
[ 68 ]
Personalize phone settings
• ADD A WELCOME NOTE
You can set your phone to show a brief welcome
note each time you switch on your phone. The note
can include your name, a reminder, or more.
1
Press Menu 4-3-3 (Menu > Settings >
Phone settings > Welcome note).
2
Enter the text of the welcome note.
As you enter characters, they appear to the left of the cursor. Press
Clear to delete characters to the left of the cursor. Press
or
to move the cursor right or left.
3
4
Press Options.
Scroll to Save and press Select.
If you ever want to erase the welcome note, select Erase instead.
• USE SPEED DIALING
You must store names and numbers in your phone book before you can use
speed dialing (1-touch dialing).
To set up speed dialing, you assign a name from the phone book to a 1-touch
dial location, using your phone’s keys
through
. When you press
and hold the key, the phone automatically dials the associated number.
•
•
: This key is used exclusively to dial your voice mailbox.
: You can use this key to dial a customer care operator. See
“Contact your service provider” on page 10 for details. You can overwrite
this feature and assign a 1-touch dial location to the
key.
Set up a speed-dial key
1
2
3
Press Names and scroll to 1-touch dialing.
Press Select.
Use
or
to scroll to the first number that includes the message
(empty) and press Assign.
[ 69 ]
4
5
Use
or
to scroll to the name and number to which you
want to assign this key and press Select.
Repeat these steps for as many keys as you want to set up.
To call a number using speed dialing, press and hold the appropriate
key for a few seconds.
Note: To quickly assign a number to an empty 1-touch dialing
key, press and hold the key. A series of prompts will appear.
Change speed dialing numbers
After you have assigned a speed dialing number to a key, you can change
key and number associations at any time.
1
2
3
4
5
Press Names, scroll to 1-touch dialing, and press Select.
Scroll to the key you want to change and press Options.
Scroll to Change and press Select.
Enter the new number or recall a number from the phone book.
When you’ve entered the number, press OK.
OR
If you’ve found a number in the phone book, press Select.
If the name you selected has more than one number, scroll to the
number you want and press Select.
Erase speed dialing numbers
You can erase speed dialing key assignments at any time.
1
2
3
4
5
Press Names.
Use or
to scroll to 1-touch dialing and press Select.
Scroll to the key you want to erase and press Options.
Scroll to Erase and press Select.
Press OK.
[ 70 ]
Personalize phone settings
• SET YOUR PHONE TO ANSWER AUTOMATICALLY
You can set your phone to answer incoming voice calls after one ring. This
setting works when your phone is connected to a headset or to an
approved handsfree car kit.
1
Press Menu 4-4-1-2 (Menu > Settings > Accessory settings >
Headset > Automatic answer).
2
3
Press Select.
Use
or
to scroll to either On or Off and press Select.
Note: Handsfree, Headset and Loopset do not appear unless your
phone has already been connected to the accessory.
• SET THE LIGHTS (CAR KIT ONLY)
While your phone is connected to a car kit, you can set the phone’s lights
two ways. You can either have the lights on only when you use the phone
or have them on the whole time the phone is in car kit mode.
Note: This setting works only when your phone is connected to a
car kit.
1
2
Press Menu 4-4-2-3 (Menu > Settings > Accessory settings >
Handsfree > Lights).
Note: Handsfree does not appear in the list unless the phone has
been connected to a car kit.
Scroll through your choices in the list below, and press Select.
Instructs the phone to turn off the lights within 15 seconds
if no keys are pressed.
Automatic
On
Instructs the phone to leave the lights on the entire time
that your phone is connected to the car kit.
[ 71 ]
• RESTORE THE FACTORY SETTINGS
You can change the default (factory) settings for your phone. Later, you
can return them to the original settings when needed.
Note: The phone does not reset the memory, timers, language
selection, and security code. However, any profiles you have modified
are reset when you restore your settings.
1
2
Press Menu 4-3-6 (Menu > Settings > Phone settings > Restore
factory settings).
Enter your security code and press OK.
[ 72 ]
Manage phone security
12 Manage phone security
Your phone has a versatile security system that is intended to prevent
unauthorized use of the phone.
You cannot activate or use certain phone features without having first
successfully entered your phone’s security code.
•
•
The default (preset) security code is 12345.
Nokia highly recommends that you immediately change this code. Then,
write down and store the new code in a safe place, away from your phone.
TIPS
•When you enter the security code, a * appears on the screen each
time you press a key. The * prevents others from seeing your code.
•If you enter the wrong security code five times in a row, your phone
won’t accept any entries for the next five minutes. However, if
you realize that you’ve entered the code incorrectly before pressing
OK, use Clear to erase the code, digit by digit.
• CHANGE YOUR SECURITY CODE
It’s a good idea to change your security code so that others who know the
default code cannot enter the correct code.
1
Press Menu 4-5-2-1(Menu > Settings > Security settings > Access
codes > Change security code). The Security code box appears.
2
3
Enter the default security code and press OK.
At the message Enter new security code, enter your new security code
and press OK.
4
At the message Verify new security code, enter your new security code
again and press OK. The message Security code changed appears.
If you have changed your security code and don’t remember the new
code, contact your service provider. Once you have changed your security
code, the default setting is no longer valid.
[ 73 ]
• LOCK THE KEYPAD
When you lock the keypad, you prevent accidental keypresses — for example,
when your phone is in a pocket or purse. This feature is called Keyguard.
Note: Keyguard is automatically turned off when the phone is
connected to a car kit.
Activate Keyguard
At the Start screen:
Press Menu then press
.
When Keyguard is on, calls may be possible to the emergency number
programmed into your phone. For example, you could dial 911 and
press
. The number is displayed only after you have keyed in its
last digit.
Deactivate Keyguard
Press Unlock then press
.
Answer a call while Keyguard is active
During an incoming call, the keypad automatically unlocks.
•
Press
or
to answer the call.
After you end the call, Keyguard automatically becomes active again.
•
If you need the phone’s lights while Keyguard is on, press the Power
key to quickly switch the lights on for 15 seconds.
[ 74 ]
Manage phone security
• RESTRICT CALLS
You can restrict incoming and outgoing calls. To restrict calls, you create
a list of numbers and apply the appropriate restriction.
Before you define restrictions for outgoing calls, two restriction options
are available: Select and Add restriction. The maximum number of call
restrictions you can define is ten.
Note: When calls are restricted, calls may be possible to certain
emergency numbers in some networks (for example, 911 or other
official emergency number).
Add a number to the call restriction list
You can create a list of restrictions for both outgoing and incoming calls.
1
Press Menu 4-5-1 (Menu > Settings > Security settings > Call
restrictions).
2
3
Press Select, enter your security code, and press OK.
Scroll to Restrict outgoing calls or Restrict incoming calls, then
press Select.
4
5
Scroll to Add restriction, then press Select.
Enter the number you want to restrict, or recall the number from the
phone book, then press OK.
6
Enter a name for the restriction, then press OK. If you press OK
without entering a name, the number will be used.
After you have used the Add restriction option to add at least one
restriction, the following options become available:
Select
Allows you to select call restrictions from the
outgoing or incoming calls list
Add restriction Allows you to add a call restriction
Edit
Allows you to edit an existing call restriction
Erases an existing call restriction
Erase
[ 75 ]
Restrict outgoing calls
1
Press Menu 4-5-1 (Menu > Settings > Security settings > Call
restrictions).
2
3
4
Press Select, enter your security code, and press OK.
Scroll to Restrict outgoing calls and press Select.
Scroll to Select to choose from your list of call restrictions.
If you have not added any restrictions, your only option will be All calls.
Scroll to the restriction you want to activate and press Mark.
Press Done. The message Save changes? appears. Press Yes.
5
6
When attempting to call a number you have restricted, the message
Call not allowed appears, and the call is cancelled.
Restrict incoming calls
1
Press Menu 4-5-1 (Menu > Settings > Security settings > Call
restrictions).
2
3
4
Press Select, enter your security code, and press OK.
Scroll to Restrict incoming calls, then press Select.
Scroll to Select and press Select to choose from your list of call
restrictions.
If you have not added any restrictions, your only option will be All calls.
Scroll to the restriction you want to activate and press Mark.
Press Done. The message Save changes? appears. Press Yes.
5
6
Turn off call restrictions
Turn off restrictions by following the same steps you used to restrict incoming
or outgoing calls. When you get to step 5,
•
•
Scroll to the restriction you want to deactivate and press Unmark.
Press Done. You’re asked if you want to save changes. Press Yes and
the restriction is turned off.
[ 76 ]
Manage reminders and notes
13 Manage reminders and notes
Reminders and notes help you keep track of important events or tasks. A
reminder can have a date, time, and alarm attached to it. If you have not
set your clock, you will be prompted to do so when you enter your first
reminder. Predictive text is available with this feature. See “Write with
predictive text” on page 34 for more information.
Note: This feature shares memory space with other features. See
“Memory use” on page 17 for more information.
• ADD A REMINDER
1
2
3
Press Menu 8 (Menu > Reminders), then press Options.
Scroll to Add reminder and press Select.
Enter the subject for the reminder and press Options. The following
options are available:
•
•
•
Save: Saves the reminder.
New line: Moves the cursor to the next line.
Predictive text: Allows you to turn predictive text on or off. If
predictive text is activated, the predictive text options will be
available.
4
5
Highlight Save and press Select.
Enter the date and press OK, then enter the time and press OK.
If you have programmed your phone’s clock for am/pm format, you
will then have to select am or pm.
6
Next, you have the option to set an alarm for your reminder.
•
•
If you don’t want an alarm, highlight Alarm off and press Select.
If you want an alarm, highlight Alarm on and press Select.
You can set the alarm to go off 5, 10, 15 or 30 minutes before the
time you set for the reminder.
[ 77 ]
You can choose At event time to set the alarm to go off at the
same time as the reminder.
You can choose Other to define your own time for the alarm.
Scroll to the option you want and press Select.
• ADD A NOTE
1
then press Select.
2
Enter the note, then press Options.
•
•
•
Save: Saves the note.
New line: Moves the cursor to the next line.
Predictive text: Allows you to turn predictive text on or off. If
predictive text is activated, the predictive text options will be
available.
3
Scroll to Save, then press Select.
• SEND AND RECEIVE A REMINDER OR NOTE
You can send and receive reminders and notes in the same way you send
and receive business cards, by text messaging (SMS) or by Infrared. For more
information about these methods of sending and receiving information, see
“Infrared” on page 104 and “Communicate with text messages” on page 85.
Send a reminder or note
1
2
Press Menu, scroll to Reminders, and press Select.
Scroll through your list of reminders and notes, highlight the one you
want to send, and press Options.
3
4
Scroll to Send, then press Select.
You will have the options Send via IR, Send as note, or Send as text.
Select the method you would like to use, then follow the phone’s
prompts to send the reminder or note.
[ 78 ]
Manage reminders and notes
Receive a reminder or note
1
The message Reminder received appears when someone sends you a
reminder or note.
2
Press Show to view the note.
OR
Press Exit to delete the note. The message Discard note? appears.
Press OK.
3
4
Press Options to view the available reminder or note options.
Press Select when you have highlighted the option you want.
See the next section for a list of available options and their descriptions.
• CHOOSE OTHER REMINDER AND NOTE OPTIONS
When you view a reminder or note, or when you view the list of reminders
and notes, you may have some of the following options:
View
Allows you to view the note or reminder.
Add reminder Allows you to add a reminder.
Add note
Erase
Allows you to add a note.
Erases the reminder or note.
Erase opt’s
Allows you to choose from two options for erasing
multiple reminders and notes.
All expired: Erases all reminders that expired.
All at once: Erases all reminders and notes.
Edit
Allows you to edit the reminder or note.
Allows you to send the reminder or note.
Send
Date and time Allows you to set the current date and time. The time
setting will change the current time set for the clock.
[ 79 ]
14 Use prepaid services
With prepaid service, you buy wireless network
services in advance. Your phone works the same
way it did before, with some additional features.
Prepaid service may not be available from your
wireless service provider. Contact the service
provider for details.
Note: When no more charging units or currency units are left,
calls may only be possible to the emergency number programmed
into your phone (for example, 911 or other official emergency
number).
• MANAGE PREPAID SERVICE
After you sign up with your service provider for prepaid service, you need
to activate the Prepaid menu. This menu appears on your screen only if
you’ve activated the service.
ACTIVATE PREPAID
To activate prepaid services, enter the following sequence:
(*#7766#)
The message Prepaid menu enabled appears on the screen.
DEACTIVATE PREPAID
To deactivate prepaid services, enter the following sequence:
(*#77633#)
The message Prepaid menu disabled appears on the screen.
[ 80 ]
Use prepaid services
USE THE MENU
•
To use the Prepaid menu, press Menu and then press
immediately to the Prepaid menu.
Press or to scroll through prepaid options.
to go
•
• SAVE YOUR ACCESS NUMBERS
You can check your prepaid balance and add money when the balance is
low. To do that, you first need to save the correct access numbers in your
phone. Contact your service provider for the access numbers.
1
2
3
Press Menu 11-3 (Menu > Prepaid > Save access phone numbers).
At Save access phone numbers, press Select.
Scroll to Replenish phone number, press Select, enter the access
number from your service provider, and press OK.
4
Scroll to Balance phone number, enter the balance number from your
service provider, and press OK.
The message Saved appears to confirm each entry.
• ADD MONEY TO YOUR ACCOUNT
To add money, you must first have saved the correct access number in
your phone. (See the previous section for instructions.)
1
2
3
Press Menu 11-2 (Menu > Prepaid > Add money to account).
At Card number, enter your prepaid card number and press OK.
When you see the message Listen for prompt then press OK, press
OK.
When the transaction is complete, a voice message gives you the new
balance.
4
When you see the message Wait for prompt, then press End, press
End call.
[ 81 ]
• CHECK YOUR PREPAID BALANCE
Contact your service provider for the toll-free access number used to check
the balance remaining in your prepaid account.
Check the prepaid balance
1
Press Menu 11-1 (Menu > Prepaid > Check account balance).
2
At Check account balance, press Select.
The phone calls your service provider. The screen shows Calling and
then Checking balance. A voice message gives you the current balance.
3
Press
to terminate the call.
[ 82 ]
Set network services features
15 Set network services features
You can subscribe to various network services. Availability depends on
your service provider. Your phone supports the network services listed
here. These services are not available from all providers or in all areas.
•
•
•
•
Voice privacy
Call waiting
Call forwarding
Sending own number
Feature code: When you subscribe to any of these services, your service
provider gives you a feature code that activates each service. Deactivation
codes are used to deactivate each service. After you store the appropriate
code, your phone sends the code to the network to verify that you’re using
the correct feature code.
Menus for network features: Menus for the services described here appear
on your phone only after you’ve stored the appropriate feature code. You can
use these menus to activate and deactivate the network services.
Voice privacy: The voice privacy feature does not require you to store a
feature code before using it.
More than one number? If your phone has more than one phone number
assigned to it, stored feature codes apply only to the primary phone number.
• SET UP HOW YOUR PHONE SELECTS A NETWORK
You can choose how your phone selects a network to use. Your phone may
not show the options described here. For information, contact your service
provider.
Search for a network
Press Menu 5 (Menu > System).
You have the following three options.
[ 83 ]
Automatic Yourphone automatically searches for available networks
and chooses the appropriate one. Every time you turn
on your phone, it resets to Automatic.
Manual
The phone searches for networks and then shows a list
of the ones that are available. If an available network is
found, the word Available: appearsonthe screen followed
by the name of the network. To choose the network
listed, press OK.
New search Your phone begins a new search for both private and
residential systems. When it finds the best system
available, the phone shows the system name.
If the phone doesn’t find another system, the question
Perform an extended search? will appear. Press OK if
you wish to continue searching.
Note: If you have two phone numbers, you can use the Manual
and New search options only with your primary phone number.
• USE YOUR PHONE WHILE TRAVELING
When your phone is outside its home area, the phone is said to be roaming.
Calls made or received while you are roaming may cost more than calls
made in your home area.
•
When your phone begins roaming, the phone beeps once and may show
the word ROAM on the phone’s screen, depending on how roaming
works with your phone.
•
•
When your phone is not roaming, it either shows the word HOME or
the name of your service provider.
When you’re roaming in some systems outside your home area, the
system in which you’re traveling (the host system) may not recognize
your phone. You may not be able to place a call.
Contact your service provider for more specific information on how roaming
works with your phone and for information about coverage limitations.
[ 84 ]
Communicate with text messages
16 Communicate with text
messages
You can use your phone to send and receive short
text messages if your service provider offers the
message feature and if you subscribe to the service.
You can also send messages as e-mail.
• ABOUT TEXT MESSAGES
Message recipients: The phone to which you send a text message must
support text messages. It may not be possible to send an SMS text message
to someone’s phone who has an account with a different service provider.
However you may be able to send a text message as e-mail to someone
who has an account with a different service provider. For more information
on e-mail SMS messaging, please see “Send and receive e-mail messages”
on page 92.
Message length: The maximum length of a received text message is 160
characters.
Network variations: The maximum length of a text message depends on
the capabilities of the network from which the message originated. Also,
text message format may occasionally be different, as messages can originate
in networks other than your own.
Note: You can send mobile messages if you have subscribed to the
mobile messaging service offered by your service provider and the
network in which you are using your phone supports mobile
messaging.
Contact your service provider for more information about text message
services.
[ 85 ]
• USE FOLDERS FOR TEXT MESSAGES
Your phone has four folders for managing text messages.
Inbox
The inbox stores messages you receive.
Outbox
The outbox stores messages you have written, sent, edited
and forwarded.
Archive
The archive folder stores messages you want to save.
Templates The templates folder stores message templates you create.
A template is like a form letter—a message you can use
many times.
Text message capacity
Your phone can store up to 30 text messages. This is a combined total of
messages stored in your inbox, outbox, and archive folders. In addition,
your phone stores up to 10 custom templates in the Templates folder.
• WRITE AND SEND A TEXT MESSAGE
When writing text messages, use the predictive text method for fast text
entry. For details, see “Write with predictive text” on page 34.
1
Press Menu, select Messages, then select Write message.
The message screen appears.
Counter
2
Enter a message of up to 160 characters.
A counter in the upper right corner of the
screen shows the number of characters
remaining.
3
4
When you’ve finished writing, press Options,
scroll to Send, then press Select.
Enter or recall the recipient’s phone number, then press OK.
Sending message appears. When the message is successfully sent,
Message sent appears.
[ 86 ]
Communicate with text messages
Note: When sending messages via the SMS network service, your
phone may display the words “Message sent”. This is an indication
that the message has been sent by your phone to the message
center number programmed into your phone. This is not an
indication that the message has been received at the intended
destination. For more details about SMS services, check with your
service provider.
Options when writing a text message
The order and availability of options varies depending on the messaging
function and the network service features enabled on your phone.
Send
Sends the message.
Settings
Allows you to choose options for the message:
Callback no., Reply req., Read receipt, and Urgent.
Save
Saves the message.
Clear text
Exit editor
Insert name
Clears the message screen.
Takes you back to the Write message screen.
Allows you to insert a name from the phone book.
Insert number Allows you to insert a number from the phone book.
Use template Allows you to insert a template.
Attach picture Allows you to attach a picture to your message.
Insert word
OR
Edit word
Using predictive text (T9), you can manually spell a
word and insert it into your message. This option is
not available unless predictive text is activated.
Insert symbol Takes you to the list of special characters. Available
when predictive text (T9) is activated.
Predictive text Activates or deactivates predictive text.
Matches
Other word choices while using predictive text.
[ 87 ]
• RESEND A MESSAGE FROM THE OUTBOX
A message in the outbox shows one of two icons:
•
•
The
icon shows that you have sent the message to the text
message center.
The
icon shows that you have tried to send the message, but the
sending attempt was unsuccessful.
1
2
3
4
Scroll to the message, then press Select.
Press Options.
Scroll to Send, and press Select.
Enter the number to which you want to send the message. You will have
the option of finding one of your stored numbers. Once the number has
been entered, press OK.
• RECEIVE A TEXT MESSAGE
When you receive a text message, the phone plays a message alert tone
and the text message icon
messages:
appears, along with one of the following
•
Message received: Means that you have an unread message or page.
If you have more than one message or page, the appropriate number
is listed before this message.
When you receive the above message along with another message call,
followed by a name or number, the message is a page. Only the names
of people who are stored in your phone book appear.
•
•
New emergency message: Means that an emergency message or page
was sent by someone via the service provider. Emergency messages are
sent only in situations where life or property are in immediate danger.
Emergency messages are listed first and override all other messages.
Urgent: Means the message has a high priority. These messages are
indicated by an exclamation point (!).
[ 88 ]
Communicate with text messages
• READ A TEXT MESSAGE
1
2
Press Show.
Press Options for a list of choices you have while reading the message
(see the list at the end of this section).
3
Press Select when the option you want is highlighted.
In your inbox, text messages are shown in the order in which they were
received, unless one is an emergency message. An emergency message
overrides any other message and appears first.
OPTIONS FOR A MESSAGE
When you press Options while reading a message, you have the following
choices:
Erase
Reply
Chat
Erases the current message.
Provides a screen where you can write a reply.
Allows you to start a chat session.
Use number Calls the person who sent you the text message, if their
phone number is included in the message. You can also
press
while the message is open to dial the
number.
If more than one number is on the screen, the numbers
appear in a list. Scroll to the phone number you want
to call and press
.
Forward
Forwards the message to another person. That person
must have the appropriate message service.
Edit
Allows you to edit the message.
Save
Saves the message in the archive folder.
Allows you to rename the message.
Rename
[ 89 ]
• SAVE A MESSAGE IN THE ARCHIVE FOLDER
When you send or receive a text message, you can save it in the archive
folder. Messages can be saved from the inbox and the outbox.
Save a message
1
2
3
Highlight the message you wish to save and press Select.
Press Options.
Scroll to Save, then press Select.
The message Saved to archive appears.
• WHEN YOUR PHONE’S MEMORY IS FULL
When your phone’s message memory is full, one or more messages of the
lowest priority are automatically deleted. Messages are not deleted from
your phone’s archive and templates folders.
•
If after deleting messages the memory is still full, your phone shows
the message No space: message waiting. The
icon blinks.
•
Clear the notification by pressing OK.
• ERASE MESSAGES
You can erase a message individually or erase the contents of an entire
folder at once. You also have the option of erasing all read messages from
all folders at the same time.
Erase a message
1
While reading a message, press Options.
2
Scroll to Erase, then press Select.
Your phone asks you to confirm that you want to erase the message.
Press OK.
3
[ 90 ]
Communicate with text messages
Erase messages from folders
1
Press Menu 01-8 (Menu > Messages > Erase all). You will have the
following options: All read, Inbox, Outbox, and Archive.
2
Scroll to the folder that you want to empty all messages from and
press Select.
All messages in that folder will be deleted. If you choose All read, every
message you have read will be deleted simultaneously from the inbox,
outbox and archive folders.
3
Enter your security code and press OK.
• REPLY TO A MESSAGE
1
While reading a message, press Options.
2
Scroll to Reply, press Select, and choose one of the following reply
options:
•
•
As message
As e-mail
Once you select the type of reply, choose one of these options:
•
•
•
•
•
•
Blank screen
Original text (Not available when replying to e-mail.)
Template
Yes
No
Ok
3
4
Edit your reply, then press Options.
Scroll to Send, then press Select.
The phone shows the return number.
Edit the number if needed, then press OK.
5
[ 91 ]
• FORWARD A MESSAGE
1
2
While reading a message in the inbox, press Options.
Scroll to Forward, press Select, and choose whether your message should
be sent as a text message or as e-mail.
3
4
5
Press Options, or edit the message and press Options.
Scroll to Send, then press Select.
Enter or recall the recipient’s phone number, then press OK.
• SEND AND RECEIVE E-MAIL MESSAGES
You can use your phone to send and receive e-mail messages. This service
depends on operator’s availability.
Send an e-mail message
1
2
Press Menu 01-2 (Menu > Messages > Write e-mail).
Press Select.
The e-mail address box opens.
3
Enter the e-mail address, then press OK.
If you press Find, enter the first few letters of the name you want and
press Select when you find the name. The address appears in the
recipient address box.
4
5
Enter a subject and press OK.
When the message screen appears, enter your message.
The maximum number of characters for message length varies; check
with your service provider for details.
You can turn on predictive text input if you wish. For information, see
“Write with predictive text” on page 34.
6
When you’ve finished the message, press Options, select Sende-mail,
and press Select.
A status message tells you the mail is being sent.
Note: If your phone asks for an e-mail gateway number, contact
your service provider.
[ 92 ]
Communicate with text messages
Reply to or forward an e-mail message
1
If the message is not on the screen, press Menu 01-4 (Menu >
Message > Inbox).
2
3
4
5
6
Select the message you received and press Select.
Press Options, scroll to Forward or Reply, and press Select.
Scroll to As e-mail and press Select.
Select the format.
Follow steps 3 through 6 in “Send an e-mail message.”
Note: If your phone asks for an e-mail gateway number, contact
your service provider.
Receive an e-mail message
To receive e-mail messages, you need the special e-mail address provided
by your wireless service provider. You can give this address to people who
need to reach you by e-mail. They can then send e-mail messages to you
from their computers or other e-mail devices.
•
Messages sent to you by e-mail arrive as regular text messages. You
can use all the options described earlier to save, reply to, or forward
a message.
•
See your service provider to get the e-mail address for your phone and
for more information on using e-mail on the service.
• USE TEMPLATES
You can view, edit and erase the preset messages, or templates, that are
available for writing a message. Templates can be used when you write,
reply to, or edit a message.
Work with templates
1
Press Menu 01-7 (Menu > Messages > Templates) and press Select.
2
Scroll to the template you want and press Select.
[ 93 ]
3
Press Options to view the menu list:
Send
Sends the template as a text message.
Allows you to edit the template before sending.
Allows you to rename the template.
Edit
Rename
Use number Allows you to use a number.
4
Select the option you want and follow the phone’s prompts to
complete your task.
Insert a template when writing a new message
1
2
3
4
Press Menu 01-1 (Menu > Messages > Write message).
Press Options, scroll to Use template, and press Select.
Scroll to the template you want and press Select.
Continue as you would when sending a new text message.
Note: You can also insert a template when replying to or editing a
message.
• CHAT WITH OTHER PHONE USERS
You can have a direct conversation with another person using the chat
feature. Chat has distinct advantages over text messaging, such as faster
send and reply, as well as direct, uninterrupted communication with your
chat partner. To use chat you must subscribe to text messaging, which is
network dependent. Contact your service provider for more information.
Start a chat session
1
2
Press Menu 01-3 (Menu > Messages > Chat), then press Select.
Enter the other party’s phone number or recall it from the phone book
and press OK.
3
At My chat name: enter a name for the chat session and press OK.
[ 94 ]
Communicate with text messages
Write your chat message, press Options, then press Send.
4
5
6
Press OK to clear the screen and reply to the message.
To view the previous message or edit your chat name, press Options
and select Chat history or Chat name.
Note: You can start a chat session when replying to a regular text
message as well. When reading the message, select Options, then
select Chat.
• USE PICTURE MESSAGES
You can attach a picture to a text message or you can use templates to
send pictures to your friends and family. You can also save new pictures
in the Templates folder. Picture messages have options that are similar to
text messages.
Note: This function can be used only if it is supported by your
network operator or service provider. Only phones that offer picture
message features can receive and display picture messages.
Notes about picture messages
• Your phone offers five built-in picture message templates under
Messages > Templates, and space for up to five other picture messages.
• Picture messages can be sent from phone to phone, or they can be
downloaded, depending on the wireless services offered by your
provider.
• Only phones that offer picture messaging can receive and display the
images.
• Each picture message is made up of a text message. Therefore, sending
one picture message may be equivalent to sending up to six text
messages. The size of the picture message depends on the size of the
image you are sending.
Send picture messages
1
2
Press Menu, then Select.
Scroll to Templates, then press Select.
[ 95 ]
3
4
5
6
Scroll to the picture you want to send, and press Select.
Press Options, scroll to Send, then press Select.
Recall or enter the phone number of the recipient.
Press OK.
Attach a picture to a text message
For a list of options while composing a text message, see “Options when
writing a text message” on page 87.
1
2
3
4
5
6
7
Press Menu 01-1 (Menu > Messages > Write message).
Enter your message, then press Options.
Scroll to Attach picture, then press Select.
Scroll to the picture you want to send, then press View.
Press Use to attach the picture to your text message.
Press Options, then select Send.
Enter the phone number or recall a number from your phone book,
then press OK.
Preview, change, or erase a picture message
1
After a picture has been attached to your text message, press Options
at the message edit screen.
2
Scroll to one of the following options and press Select.
a) Preview - Previews the attached message before sending.
Press Back to exit.
b) Change picture - Takes you back to the picture list. Scroll to
highlight a new picture. Press View then press Use to link the
new picture to your message.
c) Delete picture - Deletes the attached picture from your text
message.
[ 96 ]
Communicate with text messages
Receive picture messages
1
When your phone displays Message received, press Show and the
message appears.
2
If the picture has a text message with it, scroll up or down to see the
entire message.
SAVE THE PICTURE
1
2
3
While viewing a picture message, press Options.
Scroll to Save picture, then press Select.
Enter a title for the picture, then press OK.
[ 97 ]
17 Use special features
This section describes several special features, including transmission of
business cards, downloading ringing tones from the Internet, and setting
the alarm clock.
• SEND AND RECEIVE BUSINESS CARDS
Your phone can send or receive electronic business cards. A business card
consists of a name, phone number, and text entry. You can save received
business cards in your phone book.
Send a business card
1
2
3
Find the name in your phone book and press Details.
Press Options, scroll to Send bus. card, then press Select.
Scroll to SMS and press Select. (SMS stands for short message
service.)
4
5
Choose Primary no. or All details, then press Select. This step appears
only if you have two numbers saved with the name or if you have a
text entry.
Enter or recall the phone number to which you want to send the
business card, and press OK.
Note: You can also send and receive business cards using infrared
(IR). See “Send and receive information” on page 105.
View a received business card
When you receive a business card, the phone shows the message Business
card received.
Note: If you press Exit at any time before you save the business
card, the message Discard business card? appears. You have the
option of OK or Back.
[ 98 ]
Use special features
When your phone shows Business card received, press Show.
Scroll through the available information.
1
2
Save a viewed business card
1
While viewing the business card, press Options.
2
Scroll to Save, then press Select.
Delete a viewed business card
•
While viewing the business card, press Options.
•
Scroll to Discard, then press Select.
• DOWNLOAD (TRANSFER) RINGING TONES
You can download (transfer) up to ten ringing tones to replace the personal
entries in your list of tones. Ringing tones can be ringing sounds or short
tunes. For details about this network service, contact your wireless service
provider, who can also point you to Web sites that offer these tones.
Note: If you press Exit at any time before you save the ringing
tone, the message Discard received ringing tone? appears. You
have the option of OK or Back.
Receive a ringing tone
If you have this service and your phone receives a downloaded ringing tone,
your phone shows the message Ringing tone received.
1
Press Options.
You have the options of Playback, Save tone, and Discard.
Scroll to Playback and press Select.
2
The phone plays the ringing tone until you press Quit.
Save a received ringing tone
1
If you want to save a ringing tone after you’ve listened to it, press Quit.
2
Scroll to Save tone, then press Select.
[ 99 ]
3
4
Choose the ringing tone you want to replace—either an empty personal
placeholder, if any are remaining, or a tone you’ve downloaded
previously.
Press Select.
The phone saves the new tone in the list of ringing tones. For instructions
on changing the ringing tone on your phone, see “Set a vibrating alert”
on page 64.
Discard received ringing tones
You can discard a ringing tone if you don’t want to save it.
•
Press Exit.
OR
•
Press Options, scroll to Discard, then press Select.
• SET THE ALARM CLOCK
The alarm clock is based on the time settings in your phone’s clock. You can
set the alarm clock to ring at any time, even if your phone is turned off.
If the alarm time is reached while the phone is switched off, the phone
switches itself on and starts sounding the alarm tone. If you press Stop,
the phone asks whether you want to activate the phone for calls. Press No
to switch off the phone or Yes to make and receive calls.
Note: Do not press Yes when wireless phone use is prohibited or
when it may cause interference or danger.
The alarm clock’s volume is determined by the phone’s current volume and
tone settings.
Set the time
To set the time, see “Set the clock” on page 67.
[ 100 ]
Use special features
Set the alarm clock
1
Press Menu 4-1-1 (Menu > Settings > Time settings > Alarm clock).
The Set alarm time message appears.
2
Enter the time for the alarm and press OK.
Use the hh:mm format (03:40, for example). The alarm clock replaces
any existing numbers with the new time.
3
4
Select either am or pm.
The am and pm options appear only if you’ve chosen the am/pm format
for the clock.
Press Select.
The Alarm on message appears, and the alarm clock icon
appears
on the Start screen.
Note: The alarm clock works even when the phone is off.
Turn off the alarm clock when it rings
When the alarm clock rings:
•
•
Press Stop to turn it off.
Press Snoozeto set the alarm to go off again in 10 minutes. The message
Snoozing appears on the screen. If you wish to cancel the snooze,
press Stop.
If you let the alarm ring for 1 minute or more without pressing a key, it
stops ringing, waits 10 minutes, then rings again. This continues until you
press Stop.
Turn off the alarm clock altogether
If you want to turn the alarm clock completely off:
1
Press Menu 4-1 (Menu > Settings > Time settings).
Alarm clock appears on the screen with the current alarm time.
Press Select, scroll to Off, then press Select.
2
[ 101 ]
• USE THE CALCULATOR
Your phone’s calculator adds, subtracts, multiplies, divides, and converts
currencies.
Note: Your phone must be switched on to use this function. Do
not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
This calculator has a limited accuracy and rounding errors may
occur, especially in long division.
1
2
3
Press Menu 7 (Menu > Calculator).
Enter the first number in the calculation.
Based on the type of calculation that you need to perform, use one of
the following actions:
If you want to...
...Do this
Enter a decimal point Press
.
Add
Press
Press
Press
Press
for + symbol.
Subtract
Multiply
Divide
twice for - symbol.
three times for * symbol.
four times for / symbol.
You can also press Options and then use
or
to scroll to:
Add, Subtract, Multiply, Divide, Square, Square root, Change sign,
To home, To foreign, or Exchange rate.
4
5
Enter the second number in the calculation.
You can repeat steps 3 and 4 as many times as necessary. Press Clear
to erase any mistakes.
Press Options, use
or
to scroll to Equals, and press Select.
[ 102 ]
Use special features
Convert currency
You can use the calculator to first set the exchange rate and then to
calculate the exchange value.
SET THE EXCHANGE RATE
1
2
3
Press Menu 7 (Menu > Calculator), then press Options.
Use or to scroll to Exchange rate and press Select.
Select the exchange rate: Foreign units converted to home units or
Home units converted to foreign units.
4
Press Select.
The exchange rate box opens with the number 1.
Enter the appropriate number and press OK.
5
To enter a decimal point, press
.
CALCULATE CURRENCY USING THE EXCHANGE RATE
1
2
3
Press Menu 7 (Menu > Calculator).
Enter the number of units for the exchange rate.
Press Options and scroll to To home or To foreign.
•
To home converts foreign units of currency to home units using
the exchange rate you entered.
•
To foreign converts home units of currency to foreign units using
the exchange rate you entered.
4
Press Select.
[ 103 ]
18 Infrared
Your phone can send and receive certain types
of data by way of the phone’s infrared (IR)
port. This is a wireless transfer, so you don’t
need a cable or additional software.
Infrared port
To connect using IR, the device with which you
want to connect must comply with Infrared
Data Association (IrDA) requirements.
Transmission and reception must be to or from
a compatible phone or device (for example,
another phone, computer, or handheld device).
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere
with other IR devices. This device is a Class 1 Laser product.
Note: The preferable distance between two devices in an infrared
connection is from 3 inches to 3 feet. There must be no obstructions
between the devices when both IR ports are pointed at each other.
Note: Your phone must be switched on to use this function. Do
not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
• INFRARED BASICS
You can use IR to send and receive phone book entries (business cards)
and reminder notes.
1
2
Make sure that the IR ports of the two devices are pointed at each other.
Press Menu 9 (Menu > Infrared), then press Select. You see the
message IR reception activated, and the IR icon
appears.
3
Have the user of the sending device select the desired IR function to
start data transfer.
If data transfer does not start within 2 minutes after the activation of
the IR port, the connection is cancelled. You must start it again.
[ 104 ]
Infrared
Check the status of an IR connection
The status of an IR connection is shown by the infrared icon
.
•
When
appears steady, there is an IR connection between your
phone and the other device.
•
•
When
When
doesn’t appear, no IR connection exists.
blinks, your phone is trying to connect to the other device
or the connection has been lost.
• SEND AND RECEIVE INFORMATION
You can transmit information in your phone by infrared (IR) using the
industry-standard v.card format. You can send and receive business cards
(v.card 2.1 format) to another compatible phone, to a PC that has an IR
port and is running the appropriate software, or to other compatible IR-
equipped handheld devices.
Send a business card to another device
First, make sure that the other phone or device is set to receive data via
its IR port. Refer to the user guide for the receiving device for more information
on setting up IR communications and receiving data over IR.
1
2
3
4
5
Recall the phone book entry you would like to send by IR.
Press twice (Details > Options).
Scroll to Send bus. card and press Select.
Point the two IR ports at each other.
Scroll to Via infrared, then press Select.
Sending
indicator
The message Sending business card
appears on the screen.
Note: If you have more than one number or text information to
send, choose Primary no. or All details, then press Select.
[ 105 ]
Receive a business card from another device
You can receive business cards from another compatible device. The user
of the other phone or device sends you a card as described in the previous
section.
1
2
3
4
Point the two IR ports at each other.
Press Menu 9 (Menu > Infrared).
When you see the message Business card received, press Show.
Press Options to select Save or Discard, and press Select.
•
If you press Save, the confirmation message Business card saved
appears.
•
If you press Discard, the question Discard business card? appears.
Press OK to discard the information.
Reminders
You can send and receive reminder notes (v.cal 2.1 format) between
compatible phones and other compatible IR-equipped handheld devices.
Note: Make sure that the other phone or device is set to receive
data by way of its IR port. Refer to the user guide for the other
device for more information on enabling IR communications and
receiving data over IR.
SEND A REMINDER NOTE TO ANOTHER DEVICE
1
2
3
4
Scroll to the reminder you wish to send and press
Scroll to Send, then press
Point the infrared ports of each device at each other.
Scroll to Via IR and press to start data transfer.
.
.
[ 106 ]
Infrared
• PC CONNECTIVITY
You can make a serial connection between your Nokia phone and your
compatible Infrared-equipped laptop or IR-equipped desktop PC. Once
you establish this connection, you can access your phone’s information
from your PC, or use your phone as a wireless modem.
Nokia PC Suite™
Once your phone is connected to your PC via Infrared, you can use the
various components of Nokia PC Suite to:
•
•
make a backup copy of the data in your phone (Content Copier)
edit phone book names and numbers, profiles, and settings via your
PC's keyboard.
•
•
create new ringing tones and transfer them to your phone (PC Composer)
synchronize your phone book and reminders with PIM applications such
as Microsoft Outlook, Outlook Express, and Lotus Organizer (PC Sync)
Instructions for PC Suite installation and setup, as well as the PC Suite user
guide are available as part of the software download. Please refer to the
documentation provided with PC Suite for more information.
Modem setup
You can use your Nokia phone as a wireless modem with your laptop
computer, giving you access to the Internet (for e-mail and Web browsing)
or corporate networks wherever you are.
For more information on modem setup, please refer to the PC Connectivity
Guide. This document can be downloaded from the Nokia website.
Download software
PC Suite and modem setup are provided to you free of charge, and are
available for download from:
http://www.nokia.com
[ 107 ]
19 Connect to the Wireless Internet
Your phone has a built-in browser you can use to
connect to selected services on the Internet. You
can view weather reports, check news or flight
times, view financial information, and much more.
You can also save the address of any Wireless
Internet site as a bookmark, much the same way
you bookmark a Web page on your personal computer.
Note: Your phone must be switched on to use this function. Do
not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Note: All features may not be available on all carrier networks.
Please check with your service provider for availability. If your phone
does not display “Services” on its menu, your network provider does
not support these features at this time.
• NOTES ON WIRELESS INTERNET ACCESS
This section gives a brief overview of wireless Internet access and provides
some notes that may be useful in understanding wireless access.
Technology background
A technology called Wireless Application Protocol (WAP) is to mobile devices
what the World Wide Web (WWW) is to desktop computers. The mobile
community began developing WAP several years ago to provide access to
the Internet for mobile users.
Today, most WAP sites consist of text and hyperlinks, and some sites can
accept text input. Some pages even contain low-resolution graphics. Your
service provider and others are free to design WAP sites as they choose,
so the sites are as variable as Web pages on the Internet.
[ 108 ]
Connect to the Wireless Internet
The service provider’s role
Because wireless Internet content is designed to be viewed from your phone,
your wireless service provider now becomes your “wireless Internet service
provider“ as well.
It’s likely that your service provider has created a home page and set up
your browser to go to this page when you connect to the Internet. Once
at your service provider’s home page, you’ll find links to a number of other
sites that offer wireless access.
• SET UP FOR BROWSING
You should not need to do anything to set up your phone for browsing.
Your service provider usually modifies the appropriate settings when you
subscribe to the feature. Contact your service provider if you have
problems using the browser.
• SIGN ON TO THE WIRELESS INTERNET
You use the Services menu to connect to the Internet.
1
2
At the Start screen, press Menu 10 (Menu > Services).
At the Services menu, press Select, then select Home.
Your phone connects to the Internet and to your service provider’s
home page. The first time you connect, you will be asked to enter
the date and time if you have not already set them.
•
The message Connecting to service appears on the screen until
the connection is complete.
•
If you see the message Check homepage address, the phone may
not be set up for browsing. Contact your service provider to make
sure that your phone is configured properly.
[ 109 ]
• USE BROWSER OPTIONS (SERVICES MENU)
The Services menu gives you the options shown in the following list.
Some service providers may have customized the options on the Services
menu. Contact your service provider for more information if any of the
options shown here are not available.
Starts the browser and takes you to your service
provider’s home page.
Home
Provides options for changing connection settings,
Settings
appearance settings, and security certificate.
Empties the browser’s temporary memory and frees
Clear cache
up space. It’s advisable to empty your cache at the
end of each session.
• SIGN OFF THE WIRELESS INTERNET
Press
at any time (or press Quit). At the question Quit browsing? select
Yes.
Note: The information or services you have accessed are stored in
the cache of your phone. A cache is a buffer memory, which is
used to store data temporarily. If you have tried to access or have
accessed confidential information requiring passwords (for
example, your bank account), empty the cache of your phone after
each use.
To empty the cache, press Menu 10-3 (Menu > Services > Clear
cache).
• NAVIGATE THE WIRELESS INTERNET
The pictures on this page show most of the elements you may find on a
wireless Internet site. These are examples only.
[ 110 ]
Connect to the Wireless Internet
Header line: The current Internet site.
Active hyperlink: Highlighted option ready to
be chosen.
Inactive hyperlink: Scroll to select a link and
press OK to switch to other pages on the current
site or to other sites.
Use
and
to scroll through the list of
as “open link”.
links. You can use
Selection list: Brackets mean you can press
the link to show additional choices or links.
Options/Back: Press Options to go to the site’s
menu and/or the browser menu. Press Back to
return to the previous page.
Data entry field: Brackets [ ] around three dots
appear when you need to enter information.
For example, you might enter a city name, an
airline name or flight number, or a stock symbol.
Edit a data entry field
When you need to enter information, follow these steps.
1
2
Scroll to highlight the data entry field, press Options, then select Edit.
Use the phone’s keypad to enter the text in the data entry field (for
example, Miami), and press OK.
The text you entered now appears between the brackets in the field.
3
Scroll to the link you want (for example, Get forecast?) and press
Options and select Open link.
[ 111 ]
Choose browser options (while connected)
While you’re connected to the Internet, the phone’s browser provides the
options described in the following list.
Tip: Developers of wireless Internet sites may add options to the
browser menu that are specific to their Web sites. These options
are often links to other areas within the site. As in any other menu,
scroll to the link you want and press Select.
Home
Takes you back to the service provider’s home page.
Bookmarks Shows a list of all saved bookmarks.
Allows you to edit the currently selected browser
element (for example, a checklist or text entry field), or
selects the active (highlighted) hyperlink.
Edit or
Select
Go to
Accepts an address you enter.
address
Use
Number
Captures a phone number shown on the screen to add
to the phone book or place a call.
Clear cache Empties the browser’s temporary memory.
Exits the current session and returns to the Start
screen.
Exit
• USE BOOKMARKS
You can save addresses for your favorite sites as bookmarks. A bookmark
helps you find a site again.
•
•
If a wireless Internet site has a title, it will appear in the bookmark list
(for example, Yahoo! News, ebay on WAP, Mapquest).
If the site has no title, the site’s address will appear in the list of
bookmarks (for example, http://www.yahoo.com/news.wml).
[ 112 ]
Connect to the Wireless Internet
SAVE AN ADDRESS AS A BOOKMARK
1
Navigate to the site you want to bookmark and press Options.
2
Scroll to Add Bookmark and press Select.
ENTER A BOOKMARK MANUALLY
1
2
3
4
While browsing, press Options.
Scroll to Bookmarks and press Select.
Press Options, highlight New bookmark and press Select.
Enter the site’s address (example: my.yahoo.com) and press OK.
You don’t need to enter http://. It is added automatically.
Enter a name for the new bookmark and press OK.
5
RETURN TO A BOOKMARKED SITE
1
2
3
4
While browsing, press Options.
Scroll to Bookmarks and press Select.
Scroll to the bookmark you want and press Options.
Scroll to Go to and press Select.
If your connection ends while browsing, your phone will reconnect to the
Internet when you select your bookmark.
[ 113 ]
20 Play games
Not only can you use your phone for communication but also for some
serious fun. Your phone offers three games from which to choose.
Note: Your phone must be switched on to use this function. Do
not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Start a new game
1
Press Menu 6-1 (Menu > Games > Select game).
2
Scroll to the desired game, and press Select.
Use the option Instructions to learn how to play the game. With the option
Level you can choose the difficulty level of the game.
Please visit Nokia games services on the Internet for more hints and tips:
http://www.nokia.com
GAME SETTINGS
You can change the settings of the game’s sounds, lights and shakes. To
access the settings menu press Menu > Games > Settings.
• SPACE IMPACT
Use your weapons to survive alien attacks. When you defeat all the enemies,
you progress to the next level. Use the
and down, then and keys to move left and right. Key
fires the main weapons, and key
and
keys to move up
or
or
fires bonus weapons.
• PAIRS II
Uncover pictures to find pairs, but use as few tries as possible. In Time
trial, you must find all the pairs before the bomb explodes. Move the
cursor with keys
,
,
, and
. Press
to reveal the
pictures. To advance to the next level, you must match all the pairs before
the dynamite fuse runs out.
[ 114 ]
Play games
• SNAKE II
Feed the snake with as many goodies as possible and watch it grow. Use
keys , and to turn the snake toward the food. The
,
,
longer the snake’s tail grows, the higher your score. You can choose to
have a clear field, or select from five different mazes. If the snake runs
into its own tail or the surrounding wall, the game is over.
Note: You can use your phone’s IR port to play Snake II against
someone else. Before starting the game, point the IR ports of each
phone at the other and then (each player) choose the two-player
option.
[ 115 ]
21 Frequently asked questions
(FAQ)
This section lists and answers the questions phone users most frequently ask.
Some of the answers tell you to use menu shortcuts. For a complete listing
of these shortcuts, refer to “Shortcuts” on page 25.
Q. What is my security code?
A. The default security code is 12345. However, Nokia recommends that
you change this code immediately. Certain features can be used only
after the correct security code has been successfully entered.
Q. How do I lock the keypad?
A. You can lock the keypad by pressing Menu >
. The term Keyguard
is also used in connection with this feature.
Q. How do I unlock the keypad?
A. Press Unlock and then press
. The term Keyguard is also used in
connection with this feature.
Q. How do I make the ringing louder?
A. Press Menu 3-1-2-3 (Menu > Profiles > Normal > Customize >
Ringing volume), then choose a volume level.
Q. How do I change the ringing tone?
A. Press Menu 3 (Menu > Profiles) and scroll through the list of profiles
until you find the one for which you want to set the ringing tone.
Then press Select.
•
•
•
Highlight Customize and press Select.
Scroll to Ringing tone, then press Select.
Scroll through the options. After you hear the tone you want to
use, press Select.
[ 116 ]
Frequently asked questions (FAQ)
Q. How do I store my voice mailbox number?
A. Press Menu 01-9-2 (Menu > Messages > Voice messages > Voice
mailbox number), enter your voice mailbox phone number, and press OK.
The screen tells you that the number is saved.
This voice mailbox number is valid unless your phone number changes.
If your phone number changes, you will have to save a new voice
mailbox number.
Q. How do I call my voice mailbox number (retrieve voice messages)?
A. When your phone alerts you to new voice messages, press Listen and
follow the instructions on the phone. If you’d rather listen to your
messages later, press Exit.
To listen to your voice messages at a later time, perform one of the
following actions:
•
•
Press and hold
.
Press Menu 01-9-1 (Menu > Messages > Voice messages >
Listen to voice messages). Follow the voice prompts to review your
messages.
Q. How do I find my phone’s model number?
A. Turn your phone off, then remove the battery from the phone. The
model number is printed on the label under the battery.
Q. How do I redial the last-dialed number?
A. Press
twice, quickly.
Q. How do I assign a key to 1-touch dialing?
A. Press Names and scroll to 1-touch dialing.
Press Select. Use
or
to scroll to the first number that
includes the message (empty) and press Assign.
Enter or recall the name/number you want to assign this key and
press Select. Repeat these steps as many times as necessary.
[ 117 ]
Q. How do I find out the amount of space I have used in my phone’s
memory?
A. Press Names and scroll to Options.
Press Select.
Scroll to Memory status and press Select again. Your memory status
appears.
Q. How do I find my phone’s electronic serial number (ESN)?
A. Turn your phone off, remove the phone’s back cover. See “Install the
battery” for more information. The ESN number is printed on the label
under the battery.
Q. How can I change the contrast of my phone’s display?
A. Menu 4-3-5. See “Adjust screen contrast” on page 15.
Q. How do I clear my call timers?
A. WARNING: The clearing of call timers cannot be undone.
Press Menu 2-5-6 (Menu > Call log > Call timers > Clear timers).
When the security code box appears, enter your security code and
press OK.
[ 118 ]
Glossary
22 Glossary
Business card
A business card is the same as an entry in the phone
book. It may contain a name, phone number, and text
entry. It can also be sent to other devices.
Call forwarding A network services feature you use to forward incoming
calls to another number.
Call lists
A list used to track numbers for incoming, outgoing,
or missed calls.
Call log
A log that registers information about calls you make
and receive.
Call timers
Call waiting
Timers used to track the amount of time you spend
on calls.
A network services feature that enables your phone
to beep while you are in the middle of a call. The beep
lets you know that someone else is calling you.
Electronic serial The identification number that is assigned to the phone.
number
In-call options Features available for use while you are in a call.
Keyguard
Keypad tones
Menu
Locks the keypad to prevent accidental keypresses.
The tone you hear when you press a key.
A list of choices you can make to change settings on
your phone or use various phone features.
Number type
locations
A location for a specific type of number, such as a
Home or Work number.
[ 119 ]
Predictive text A method of entering information in your phone that
uses a dictionary to predict, or guess, what you are
writing.
Primary number The number your phone dials when you select a name
from the phone book that has more than one number
assigned to it.
Profile
A group of settings you can use to customize the way
your phone works.
Quick save
A fast method for saving a number.
Ringing tone
The sound your phone makes when you receive a call.
Ringing tones can be ringing sounds or short tunes.
Scroll bar
A bar that appears on the right side of the screen when
you scroll through the main menus.
SMS
The quick way to say short message service.
Start screen
The idle screen that appears when you turn on your
phone.
T9
The technical name for predictive text.
Template
A template is like a form letter-something you can use
many times.
Voice mail
A network services feature that enables people who
call and miss you to leave a voice message on your
phone.
Warning tones Sounds your phone makes when error conditions and
confirmations occur, when the battery is low, and
when you need to recharge the battery.
[ 120 ]
Reference information
23 Reference information
• BATTERY STATEMENTS
Charging and Discharging
Your phone is powered by a rechargeable battery.
Note that a new battery's full performance may be achieved only after
two or three complete charge and discharge cycles!
The battery can be charged and discharged hundreds of times but it will
eventually wear out. When the operating time (talk time and standby
time) is noticeably shorter than normal, it is time to buy a new battery.
Use only batteries approved by the phone manufacturer and recharge
your battery only with the chargers approved by the manufacturer.
Unplug the charger when not in use. Do not leave the battery connected
to a charger for longer than a week, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will discharge itself over
time.
Temperature extremes can affect the ability of your battery to charge;
allow it to cool down or warm up first.
For good operation times with NiMh batteries, discharge the battery from
time to time by leaving your phone switched on until it turns itself off (or
by using the battery discharge facility of any approved accessory available
for your phone). Do not attempt to discharge the battery by any other
means.
Use the battery only for its intended purpose.
Never use any charger or battery which is damaged or worn out.
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip, or pen) causes direct connection of the
+ and - terminals of the battery (metal strips on the battery), for example,
when you carry a spare battery in your pocket or purse. Short-circuiting
the terminals may damage the battery or the connecting object.
[ 121 ]
Leaving the battery in hot or cold places, such as in a closed car in summer
or winter conditions, will reduce the capacity and lifetime of the battery.
Always try to keep the battery between 59°F and 77°F (15°C and 25°C). A
phone with a hot or cold battery may temporarily not work, even when
the battery is fully charged. Batteries' performance is particularly limited
in temperatures well below freezing.
Do not dispose of batteries in a fire!
Dispose of batteries according to applicable local regulations (for
example, recycling). Do not dispose of as household waste.
• USE PROPER CARE AND MAINTENANCE
Your phone is a product of superior design and craftsmanship and should
be treated with care. The suggestions below will help you to fulfill any
warranty obligations and to enjoy this product for many years:
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits.
Do not use or store the phone in dusty, dirty areas. Its moving parts
can be damaged.
Do not store the phone in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.
•
Do not store the phone in cold areas. When it warms up (to its normal
temperature), moisture can form inside which may damage electronic
circuit boards.
•
•
•
Do not attempt to open the phone. Nonexpert handling may damage
it.
Do not drop, knock, or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong detergents
[ 122 ]
Reference information
to clean the phone.
•
•
Do not paint the phone. Paint can clog the moving parts and prevent
proper operation.
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage
the phone and may violate regulations governing radio devices.
All of the above suggestions apply equally to your phone, battery, charger
or any accessory. If any of them are not working properly, take them to
your nearest qualified service facility. The personnel there will assist you,
and if necessary, arrange for service.
• UNDERSTAND IMPORTANT SAFETY INFORMATION
Traffic Safety
Do not use a handheld telephone while driving a vehicle. Always secure
the phone in its holder; do not place the phone on the passenger seat or
where it can break loose in a collision or sudden stop.
Remember road safety always comes first!
Operating environment
Remember to follow any special regulations in force in any area and
always switch off your phone whenever it is forbidden to use it, or when
it may cause interference or danger.
Use the phone only in its normal operating positions.
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
[ 123 ]
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of 6
inches (20 cm) be maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with
pacemakers:
•
Should always keep the phone more than 6 inches (20 cm) from their
pacemaker when the phone is switched on
•
•
Should not carry the phone in a breast pocket
Should use the ear opposite the pacemaker to minimize the potential
for interference.
•
If you have any reason to suspect that interference is taking place,
switch off your phone immediately.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular phones,
may interfere with the functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the medical device to
determine if they are adequately shielded from external RF energy or if
you have any questions. Switch off your phone in health care facilities
when any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (for example, electronic fuel
injection systems, electronic antiskid/antilock braking systems, electronic
[ 124 ]
Reference information
speed control systems, air bag systems). Check with the manufacturer or
its representative regarding your vehicle. You should also consult the
manufacturer of any equipment that has been added to your vehicle.
Posted facilities
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone when at a refueling point
(service station). Users are reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats; chemical transfer or
storage facilities; vehicles using liquefied petroleum gas (such as propane
or butane); areas where the air contains chemicals or particles, such as
grain, dust, or metal powders; and any other area where you would
normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone or install the phone in
a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases, or explosive materials in
the same compartment as the phone, its parts, or accessories.
[ 125 ]
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both installed or portable
wireless equipment in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is improperly installed
and the air bag inflates, serious injury could result.
FCC regulations prohibit using your phone while in the air. Switch off your
phone before boarding an aircraft. The use of wireless telephones in an
aircraft may be dangerous to the operation of the aircraft, disrupt the
wireless telephone network, and may be illegal.
Failure to observe these instructions may lead to suspension or denial of
telephone services to the offender, legal action, or both.
• EMERGENCY CALLS
Important: This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well as user-
programmed functions. Because of this, connections in all
conditions cannot be guaranteed. Therefore you should never rely
solely upon any wireless phone for essential communications (for
example, medical emergencies).
Emergency calls may not be possible on all wireless phone networks or
when certain network services and/or phone features are in use. Check
with local service providers.
To make an emergency call:
1
2
3
If the phone is not on, switch it on. Check for adequate signal
strength.
Press
as many times as needed (for example, to exit a call, to exit
a menu, etc.) to clear the display and ready the phone for calls.
Key in the emergency number for your present location (for example,
911 or other official emergency number). Emergency numbers vary by
location.
4
Press the
key.
[ 126 ]
Reference information
If certain features are in use, you may first need to turn those features off
before you can make an emergency call. Consult this user guide and your
local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your wireless phone
may be the only means of communication at the scene of an accident -
do not end the call until given permission to do so.
[ 127 ]
• CERTIFICATION INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna,
the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (for example, at the ear and worn on
the body) as required by the FCC for each model. The highest SAR value
for this model phone as reported to the FCC when tested for use at the
ear is 1.34 W/kg, and when worn on the body, as described in this user
guide, is 1.07 W/kg. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC requirements).
[ 128 ]
Reference information
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model phone is on file with
the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID GMLNPW-1PA.
For body worn operation, this phone has been tested and meets the FCC
RF exposure guidelines when used with the Nokia accessories supplied or
designated for this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting
requirements and the network band. For SAR information in other regions
please look under product information at www.nokia.com.
[ 129 ]
• USE ACCESSORIES SAFELY
This section provides information about the phone’s batteries, chargers,
and accessories. Be aware that the information in this section is subject
to change as the batteries, chargers, and accessories change.
Check the model number of any charger before use with this phone. This
device is intended for use when supplied with power from an ACP-7U,
ACP-8U, or LCH-9 charger.
Warning: Use only Nokia original accessories, or batteries,
chargers, and accessories approved by Nokia, for use with this
Nokia phone model. The use of any other types may invalidate any
approval or warranty applying to the phone, and may be dangerous.
For availability of approved accessories, please check with your dealer.
When you are not using a charger, disconnect it from the power source.
When the battery is running out of power and your phone only has a few
minutes of talk time remaining, a warning tone sounds and the Battery low
message appears briefly. When no more talk time is left, a warning tone
is sounded and the phone switches itself off.
A few practical rules for accessory operation:
•
Keep all accessories out of the reach of small children.
•
When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
•
•
•
Check regularly that any vehicle-installed accessories are mounted
and are operating properly.
Installation of any complex car accessories must be made by qualified
personnel only.
Use only batteries, chargers, and accessories that have been approved
by the phone manufacturer. The use of any other types could
invalidate any approval or warranty applying to the phone and could
be dangerous.
[ 130 ]
Reference information
• BATTERIES
This section provides information about the phone’s battery. Be aware
that the information in this section is subject to change.
Note: Dispose of used batteries in accordance with any local
regulations.
The tables shown in this section provide information about battery options
that are available for your phone, charging times with the Rapid Travel
Charger (ACP-8U), the Standard Travel Charger (ACP-7U), talk times, and
standby times. Consult your service provider for more information.
Charging times
The charging times listed below are approximate.
Battery Option
ACP-7U Charger
ACP-8U Charger
BMC-3 900 mAh NiMH
Up to 4 h
Up to 2 h
Standby and talk times
Battery talk and standby times are estimates only and depend on signal
strength, network conditions, features used, battery age and condition
(including the effect of charging habits), temperatures to which the
battery is exposed, use in digital mode, and many other factors. Please
note that the amount of time a phone is used for calls will affect its
standby time. Likewise, the amount of time that the phone is turned on
and in standby mode will affect its talk time.
Battery
option
Talk time
Standby time
Digital
Analog
Digital
Analog
NiMH Battery
Up to 5 h Up to 2.5 h Up to 15 d Up to 1.9 d
BMC-3 900 mAh
[ 131 ]
• ACCESSORIES
If you want to enhance your phone’s functionality,
a range of accessories is available for you. You can
select any of these items to help accommodate
your specific communication needs. For availability
of these and other accessories, contact your service
provider.
Warning: Use only Nokia original accessories, or batteries, chargers
and accessories approved by Nokia, for use with this Nokia phone
model. The use of any other types may invalidate any approval or
warranty applying to the phone, and may be dangerous.
900 mAh NiMH Battery (BMC-3)
Provides up to 2 - 5 hours of digital talk time and
up to 6.5 - 15 days of digital standby time.
Provides up to 1 - 2.5 hours of analog talk time and
up to 1 - 2 days of analog standby time.
Also available:
850 mAh Extended Li-Ion Battery (BLC-2)
Rapid Travel Charger (ACP-8U)
The Rapid Travel Charger is a lightweight (100 g) and
durable AC charger. Calls can be made during charging,
even with a fully discharged battery.
To use the Rapid Travel Charger (ACP-8), plug it into a
standard 120 V or 220 V AC wall outlet, and connect the
lead from the charger to the base of your phone.
Approximate charging times for discharged batteries are
shown in “Charging times” on page 131.
Also available:
Standard Travel Charger (ACP-7U)
Rapid Travel Charger (ACP-12U)
[ 132 ]
Reference information
Rapid Cigarette Lighter Charger (LCH-9)
You can charge your phone’s battery from your
vehicle battery by using the Rapid Cigarette
Lighter Charger (LCH-9).
The input voltage range is from 11 to 32V DC,
negative grounding. Avoid prolonged charging
with the Rapid Cigarette Lighter Charger (LCH-
9) when the car engine is not running; this could cause your car battery
to drain. Note also, that in some cars, the cigarette lighter plug is not
provided with electricity if the ignition is not switched on.
Spare Battery Charger (DDC-1)
Lightweight and stylish, this charger
provides a convenient way to charge
your spare battery.
Compatible with:
Standard Travel Charger (ACP-7U)
Rapid Travel Charger (ACP-8U)
Desktop Charging Stand (DCV-10)
Used together with the Standard Travel Charger
(ACP-7U) or the Rapid Travel Charger (ACP-8U), the
Desktop Charging Stand is an economical choice
when you need your phone close at hand, always
ready for calls.
This charging stand allows you to charge your phone’s battery in an upright,
obtainable position on your desk.
•
Charging is indicated by the scrolling battery bars that are located on
the right side of your phone’s Start screen.
•
When the scrolling stops, the battery is approximately 80% charged.
The battery is fully charged a couple of hours after this time.
[ 133 ]
Headset (HDE-2)
The headset provides handsfree operation. It
connects directly to the phone requiring no
additional adapter.
Also available:
Boom Headset (HDB-5)
Headset Kit (HDC-5)
Loopset (LPS-3)
With the Nokia loopset, people who use a T-coil
equipped hearing aid have the freedom to talk on a
digital mobile phone. The loopset goes around your
neck - so it can be worn comfortably and discreetly.
Leather carry case (CSL-20)
Luxurious, hard-leather case that helps
protect your phone. The clip attaches to
your belt for convenience. (shown at
right)
Also Available:
Leather carry case (CSL-24)
Carry Sleeve (CBM-12)
[ 134 ]
Reference information
TTY/TDD Adapter (HDA-9)
The TTY/TDD Adapter is a Nokia
accessory that allows you to connect
your mobile phone to a
Telecommunications Device for the
Deaf (TTY/TDD) to make a call in digital
mode.
TTY/TDD
Adapter
WHAT YOU’LL NEED
In addition to the Nokia phone, you’ll
need the following for TTY/TDD
communication.
•
•
A TTY/TDD device that is “cellular ready” or “cellular compatible”
A cable for connecting the TTY/TDD to your phone, usually supplied by
the manufacturer of the TTY/TDD device
•
The TTY/TDD Adapter (HDA-9), which can be purchased separately as
an accessory at www.nokia.com
Mobile Holder (MBC-6)
Small and easy to use, the Mobile Holder provides
an ideal place to hold the phone in a vehicle. The
Mobile Holder is easy to attach to the dashboard
via a mounting plate or swivel.
The Mobile Holder is compatible with the Rapid
Cigarette Lighter Charger (LCH-9) and the
Express Car Kit (PPH-1).
[ 135 ]
Express Car Kit (CARK-125)
This car kit provides charging and
handsfree functionality, with excellent
audio quality. The car kit is easy to use and
is compatible with 12 V systems.
The Express Car Kit Includes a holder,
plug-in handsfree, external microphone
(HFM-8).
Express Car Kit (PPH-1)
The Express Car Kit provides charging and handsfree
functionality. Compatible with 12 V systems, the
Express Car Kit plugs into the cigarette lighter socket
for charging. A green light indicates readiness for
charging. The Express Car Kit has a built in speaker
and uses the phone’s microphone. The Express Car Kit
also has a connector for an optional external
microphone (HFM-8). The microphone should be
installed 20” apart from the external speaker.
The Express Car Kit requires no screws for installation
and thus can be moved easily from car to car.
[ 136 ]
Reference information
Nokia Xpress-on™ color covers
Your phone’s Xpress-on™ cover is available in several fashion colors. Extra
covers may be purchased from your authorized Nokia dealer.
Note: Before changing the cover, always
switch off the power and disconnect the
phone from the charger or any other
device. Always store the phone with covers
attached.
1
2
3
REMOVE THE BACK COVER
1
Switch off the power and disconnect the
phone from the charger or any other device.
2
Push in the release button on the back of the phone (1), slide the
cover toward the top of the phone (2 and 3), and remove it.
REMOVE THE FRONT COVER
1
Use the finger rests on each side of the
phone and hold the phone face down.
2
While holding the phone, place your
finger on the grove between the phone
and the cover.
3
Gently pry the front cover away from the
phone and lift the phone out of the
cover.
REMOVE THE KEYPAD
1
Lift the keypad from the inside of the front cover.
2
Place the keypad into the new front cover.
[ 137 ]
REPLACE THE FRONT COVER
1
Slide the top of the phone into the top of the front cover. Be careful to
align the power key/IR port with its place in the top of the front cover.
2
Gently push the bottom of the phone into the bottom of the front
cover until it snaps into place.
REPLACE THE BACK COVER
1
Insert the two catches of the back cover in the corresponding slots in
the phone.
2
Slide the cover towards the bottom of the phone
until it locks into place.
[ 138 ]
Reference information
• TECHNICAL INFORMATION
Feature
Specification
Weight
5.3 oz with BMC-3 900 mAh NiMH
battery
Size
105 cc
Frequency Range
Lowband
824.04 - 848.97 MHz (TX)
869.04 - 893.97 MHz (RX)
Highband
1850.04 - 1909.92 MHz (TX)
1930.08 - 1989.96 MHz (RX)
Transmitter Output
Power
Up to 600mW
Battery Voltage
3 V nominal
Operating Temperature -4°F to + 104°F
(-20°C to + 40°C)
Number of Channels
832 lowband
1997 highband
Phone numbers
Up to 3
Memory Locations
Up to 200
[ 139 ]
• TROUBLESHOOTING
Problem
Possible cause
Possible solution
My phone isn’t
charging.
The charger and the
phone are not properly charger to the phone.
connected.
Securely connect the
The charger is not
properly plugged in.
Ensure that thecharger
is plugged in correctly.
My phone isn’t
making/receiving
calls.
The battery is not
charged.
Charge the battery.
The signal strength is Ifyouareindoors, move
poor. toward a window.
I can’t listen to my You don’t have voice Call your wireless
voice messages.
mail service.
service provider.
You have not set up
your voice mailbox
with your service
provider.
Call your wireless
service provider.
You have not saved
your voice mail
Refer to “Set up your
voice mailbox” on
number in your phone. page 60.
You have forgotten
Call your wireless
your password or are service provider.
entering it incorrectly.
The voice mail number Call your wireless
you have saved is
incorrect.
service provider.
[ 140 ]
Reference information
• Nokia ONE-YEAR LIMITED WARRANTY
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free
from defects in material and workmanship that result in Product failure
during normal usage, according to the following terms and conditions:
1
2
The limited warranty for the Product extends for ONE (1) year beginning
on the date of the purchase of the Product. This one year period is
extended by each whole day that the Product is out of your possession
for repair under this warranty.
The limited warranty extends only to the original purchaser (“Consumer”)
of the Product and is not assignable or transferable to any subsequent
purchaser/end-user.
3
4
The limited warranty extends only to Consumers who purchase the
Product in the United States of America.
During the limited warranty period, Nokia will repair, or replace, at
Nokia’s sole option, any defective parts, or any parts that will not
properly operate for their intended use with new or refurbished
replacement items if such repair or replacement is needed because
of product malfunction or failure during normal usage. No charge
will be made to the Consumer for any such parts. Nokia will also
pay for the labor charges incurred by Nokia in repairing or replacing
the defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including
framing, and any non-operative parts. Nokia’s limit of liability under
the limited warranty shall be the actual cash value of the Product at
the time the Consumer returns the Product for repair, determined by
the price paid by the Consumer for the Product less a reasonable
amount for usage. Nokia shall not be liable for any other losses or
damages. These remedies are the Consumer’s exclusive remedies for
breach of warranty.
[ 141 ]
5
6
Upon request from Nokia, the Consumer must prove the date of the
original purchase of the Product by a dated bill of sale or dated
itemized receipt.
The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product
back to the Consumer after the completion of service under this
limited warranty.
7
The Consumer shall have no coverage or benefits under this limited
warranty if any of the following conditions are applicable:
a) The Product has been subjected to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections,
unauthorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of
Nokia, including damage caused by shipping.
b) The Product has been damaged from external causes such as
collision with an object, or from fire, flooding, sand, dirt,
windstorm, lightning, earthquake or damage from exposure to
weather conditions, an Act of God, or battery leakage, theft,
blown fuse, or improper use of any electrical source, damage
caused by computer or internet viruses, bugs, worms, Trojan
Horses, cancelbots or damage caused by the connection to other
products not recommended for interconnection by Nokia.
c) Nokia was not advised in writing by the Consumer of the alleged
defect or malfunction of the Product within fourteen (14) days
after the expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has
been removed, defaced or altered.
e) The defect or damage was caused by the defective function of the
cellular system or by inadequate signal reception by the external
antenna, or viruses or other software problems introduced into
the Product.
[ 142 ]
Reference information
8
Nokia does not warrant uninterrupted or error-free operation of the
Product. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase
for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles)
or for other good cause, the Consumer shall ship the Product
prepaid and insured to:
Nokia Inc., Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the problem,
proof of purchase and service agreement (if applicable). Expenses
related to removing the Product from an installation are not
covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be responsible
for any expenses related to reinstallation of the Product.
e) Nokia will repair the Product under the limited warranty within
30 days after receipt of the Product. If Nokia cannot perform
repairs covered under this limited warranty within 30 days, or
after a reasonable number of attempts to repair the same defect,
Nokia at its option, will provide a replacement Product or refund
the purchase price of the Product less a reasonable amount for
usage. In some states the Consumer may have the right to a
loaner if the repair of the Product takes more than ten (10) days.
Please contact the Customer Service Center at Nokia at the
telephone number listed at the end of this warranty if you need
a loaner and the repair of the Product has taken or is estimated
to take more than ten (10) days.
[ 143 ]
f) If the Product is returned during the limited warranty period, but
the problem with the Product is not covered under the terms and
conditions of this limited warranty, the Consumer will be notified
and given an estimate of the charges the Consumer must pay to
have the Product repaired, with all shipping charges billed to the
Consumer. If the estimate is refused, the Product will be returned
freight collect. If the Product is returned after the expiration of
the limited warranty period, Nokia’s normal service policies shall
apply and the Consumer will be responsible for all shipping charges.
9
You (the Consumer) understand that the product may consist of
refurbished equipment that contains used components, some of
which have been reprocessed. The used components comply with
Product performance and reliability specifications.
10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION
OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,
INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING
BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS,
LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES,
LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT,
COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR
FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES,
INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM
BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,
STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF
NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL
NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE
LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE
PRODUCT IS BEING REPAIRED.
[ 144 ]
Reference information
11 Some states do not allow limitation of how long an implied warranty
lasts, so the one year warranty limitation may not apply to you (the
Consumer). Some states do not allow the exclusion or limitation of
incidental and consequential damages, so certain of the above
limitations or exclusions may not apply to you (the Consumer). This
limited warranty gives the Consumer specific legal rights and the
Consumer may also have other rights which vary from state to state.
12 Nokia neither assumes nor authorizes any authorized service center
or any other person or entity to assume for it any other obligation or
liability beyond that which is expressly provided for in this limited
warranty including the provider or seller of any extended warranty or
service agreement.
13 This is the entire warranty between Nokia and the Consumer, and
supersedes all prior and contemporaneous agreements or understandings,
oral or written, relating to the Product, and no representation,
promise or condition not contained herein shall modify these terms.
14 This limited warranty allocates the risk of failure of the Product
between the Consumer and Nokia. The allocation is recognized by
the Consumer and is reflected in the purchase price.
15 Any action or lawsuit for breach of warranty must be commenced
within eighteen (18) months following purchase of the Product.
16 Questions concerning this limited warranty may be directed to:
Nokia Inc.
Attn: Customer Service
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: (813) 287-6612
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)
17 The limited warranty period for Nokia supplied attachments and
accessories is specifically defined within their own warranty cards
and packaging.
Nokia is a registered trademark of Nokia Corporation
[ 145 ]
[ 146 ]
Appendix A Message from the CTIA
Appendix A
Message from the CTIA
(CellularTelecommunications
& Internet Association)
to all users of mobile phones.
© 2001 Cellular Telecommunications & Internet Association. All Rights
Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.
Phone: (202) 785-0081
[ 147 ]
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in the U.S. today take advantage of the unique
combination of convenience, safety and value delivered by the wireless telephone.
Quite simply, the wireless phone gives people the powerful ability to communicate
by voice--almost anywhere, anytime--with the boss, with a client, with the kids,
with emergency personnel or even with the police. Each year, Americans make
billions of calls from their wireless phones, and the numbers are rapidly growing.
But an important responsibility accompanies those benefits, one that every wireless
phone user must uphold. When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good judgment must be exercised at
all times while driving a motor vehicle--whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving requires alertness,
caution and courtesy. It requires a heavy dose of basic common sense---keep your
head up, keep your eyes on the road, check your mirrors frequently and watch out
for other drivers. It requires obeying all traffic signs and signals and staying within
the speed limit. It means using seatbelts and requiring other passengers to do the
same.
But with wireless phone use, driving safely means a little more. This brochure is a
call to wireless phone users everywhere to make safety their first priority when
behind the wheel of a car. Wireless telecommunications is keeping us in touch,
simplifying our lives, protecting us in emergencies and providing opportunities to
help others in need.
When it comes to the use of wireless phones, safety is your most important call.
Wireless Phone "Safety Tips"
Below are safety tips to follow while driving and using a wireless phone which
should be easy to remember.
1
Get to know your wireless phone and its features such as speed dial and redial.
Carefully read your instruction manual and learn to take advantage of valuable
features most phones offer, including automatic redial and memory. Also, work
to memorize the phone keypad so you can use the speed dial function without
taking your attention off the road.
2
3
4
When available, use a hands free device. A number of hands free wireless phone
accessories are readily available today. Whether you choose an installed
mounted device for your wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.
Position your wireless phone within easy reach. Make sure you place your
wireless phone within easy reach and where you can grab it without removing
your eyes from the road. If you get an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
Suspend conversations during hazardous driving conditions or situations. Let
the person you are speaking with know you are driving; if necessary, suspend
[ 148 ]
Appendix A Message from the CTIA
the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and
ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility
is to pay attention to the road.
Do not take notes or look up phone numbers while driving. If you are reading
an address book or business card, or writing a "to do" list while driving a car,
you are not watching where you are going. It’s common sense. Don’t get caught
in a dangerous situation because you are reading or writing and not paying
attention to the road or nearby vehicles.
Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan your calls before you begin
your trip or attempt to coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need to dial while driving,
follow this simple tip--dial only a few numbers, check the road and your
mirrors, then continue.
5
6
7
8
Do not engage in stressful or emotional conversations that may be distracting.
Stressful or emotional conversations and driving do not mix--they are
distracting and even dangerous when you are behind the wheel of a car. Make
people you are talking with aware you are driving and if necessary, suspend
conversations which have the potential to divert your attention from the road.
Use your wireless phone to call for help. Your wireless phone is one of the
greatest tools you can own to protect yourself and your family in dangerous
situations--with your phone at your side, help is only three numbers away. Dial
9-1-1 or other local emergency number in the case of fire, traffic accident, road
hazard or medical emergency. Remember, it is a free call on your wireless
phone!
9
Use your wireless phone to help others in emergencies. Your wireless phone
provides you a perfect opportunity to be a "Good Samaritan" in your
community. If you see an auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other local emergency
number, as you would want others to do for you.
10 Call roadside assistance or a special wireless non-emergency assistance number
when necessary. Certain situations you encounter while driving may require
attention, but are not urgent enough to merit a call for emergency services. But
you still can use your wireless phone to lend a hand. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident
where no one appears injured or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless number.
Careless, distracted individuals and people driving irresponsibly represent a hazard
to everyone on the road. Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted educational outreach to
inform wireless phone users of their responsibilities as safe drivers and good
citizens. As we approach a new century, more and more of us will take advantage
of the benefits of wireless telephones. And, as we take to the roads, we all have a
responsibility to drive safely.
The wireless industry reminds you to use your phone safely when driving.
[ 149 ]
For more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID=85
© 2001 Cellular Telecommunications & Internet Association. All Rights
Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone:
(202) 785-0081
[ 150 ]
Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with
using wireless phones. There is no proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse health effects. Many studies of low level
RF exposures have not found any biological effects. Some studies have suggested that some
biological effects may occur, but such findings have not been confirmed by additional research.
In some cases, other researchers have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
2. What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products such
as wireless phones before they can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless phones are shown to emit
radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify users of the health hazard and to repair,
replace or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the
wireless phone industry to take a number of steps, including the following:
•
•
•
Support needed research into possible biological effects of RF of the type emitted by
wireless phones;
Design wireless phones in a way that minimizes any RF exposure to the user that is not
necessary for device function; and
Cooperate in providing users of wireless phones with the best possible information on
possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have responsibility
for different aspects of RF safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group activities, as
well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications
Commission (FCC). All phones that are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety
questions about wireless phones. FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher power than do the wireless
phones themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base stations are thus
not the subject of the safety questions discussed in this document.
[ 152 ]
Appendix B Message from the FDA
3. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in antennas, often
called cell mobile or PCS phones. These types of wireless phones can expose the user to
measurable radiofrequency energy (RF) because of the short distance between the phone and
the user’s head. These RF exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and other federal health and
safety agencies. When the phone is located at greater distances from the user, the exposure to
RF is drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called cordless phones; which have a base unit connected to
the telephone wiring in a house, typically operate at far lower power levels, and thus produce
RF exposures far below the FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have suffered
from flaws in their research methods. Animal experiments investigating the effects of
radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the development of cancer in laboratory
animals. However, many of the studies that showed increased tumor development used animals
that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-
disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals
to RF for up to 22 hours per day. These conditions are not similar to the conditions under which
people use wireless phones, so we don’t know with certainty what the results of such studies
mean for human health.
Three large epidemiology studies have been published since December 2000. Between them, the
studies investigated any possible association between the use of wireless phones and primary
brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland,
leukemia, or other cancers. None of the studies demonstrated the existence of any harmful
health effects from wireless phone RF exposures. However, none of the studies can answer
questions about long-term exposures, since the average period of phone use in these studies was
around three years.
5.What research is needed to decide whether RF exposure from wireless
phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually using
wireless phones would provide some of the data that are needed. Lifetime animal exposure
studies could be completed in a few years. However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological
studies can provide data that is directly applicable to human populations, but 10 or more years
follow-up may be needed to provide answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement, such as the angle at which the phone is
held, or which model of phone is used.
6. What is FDA doing to find out more about the possible health effects
of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators
around the world to ensure that high priority animal studies are conducted to address
important questions about the effects of exposure to radiofrequency energy (RF).
[ 153 ]
FDA has been a leading participant in the World Health Organization International
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this
work has been the development of a detailed agenda of research needs that has driven the
establishment of new research programs around the world. The Project has also helped develop
a series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on wireless
phone safety. FDA provides the scientific oversight, obtaining input from experts in
government, industry, and academic organizations. CTIA-funded research is conducted
through contracts to independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The CRADA will also include a broad
assessment of additional research needs in the context of the latest research developments
around the world.
7. How can I find out how much radiofrequency energy exposure I can
get by using my wireless phone?
All phones sold in the United States must comply with Federal Communications Commission
(FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC established these
guidelines in consultation with FDA and the other federal health and safety agencies. The FCC
limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6
watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed
by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit takes into consideration the body’s
ability to remove heat from the tissues that absorb energy from the wireless phone and is set
well below levels known to have effects.
Manufacturers of wireless phones must report the RF exposure level for each model of phone
to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the
FCC identification number on your phone so you can find your phone’s RF exposure level in
the online listing.
8. What has FDA done to measure the radiofrequency energy coming
from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard
for measuring the radiofrequency energy (RF) exposure from wireless phones and other
wireless handsets with the participation and leadership of FDA scientists and engineers. The
standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate
(SAR) in the Human Body Due to Wireless Communications Devices: Experimental
Techniques, sets forth the first consistent test methodology for measuring the rate at which RF
is deposited in the heads of wireless phone users. The test method uses a tissue-simulating
model of the human head. Standardized SAR test methodology is expected to greatly improve
the consistency of measurements made at different laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in tissue, either by the whole body or a small
part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is
used to determine whether a wireless phone complies with safety guidelines.
9. What steps can I take to reduce my exposure to radiofrequency
energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is
probably very small. But if you are concerned about avoiding even potential risks, you can take
a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key
factor in how much exposure a person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
[ 154 ]
Appendix B Message from the FDA
If you must conduct extended conversations by wireless phone every day, you could place
more distance between your body and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are
concerned about the RF exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children
and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the
measures described above would apply to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing the distance between the user and the
RF source will reduce RF exposure.Some groups sponsored by other national governments
have advised that children be discouraged from using wireless phones at all. For example, the
government in the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit wireless phone use by children was
strictly precautionary; it was not based on scientific evidence that any health hazard exists.
11. What about wireless phone interference with medical equipment?
Radiofrequency energy (RF) from wireless phones can interact with some electronic devices.
For this reason, FDA helped develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA,
medical device manufacturers, and many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe
from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless
phones and helped develop a voluntary standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no interference occurs when a person
uses a compatible phone and a accompanied hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with other
medical devices. Should harmful interference be found to occur, FDA will conduct testing to
assess the interference and work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
•
•
•
•
•
FDA web page on wireless phones
http://www.fda.gov/cdrh/phones/index.html
Federal Communications Commission (FCC) RF Safety Program
http://www.fcc.gov/oet/rfsafety
International Commission on Non-Ionizing Radiation Protection
http://www.icnirp.de
World Health Organization (WHO) International EMF Project
http://www.who.int/emf
National Radiological Protection Board (UK)
http://www.nrpb.org.uk/
July 18, 2001For updates: http://www.fda.gov/cdrh/phones
[ 155 ]
automatic answer 71
automatic redial 53
Index
A
B
ABC and 123 modes 31
accessibility
battery
alternate formats 6
features 9
mobile inductive loopset 7
solutions 6
TTY contact 6
important information 13
indicator 12
information 131
accessories 132
car kit (PPH-1) 136
carry case (CSM-6) 134
mobile holder (MBC-6) 135
safety information 130
spare battery charger 133
accessory
prolonging life 13
reference information 121, 130
removal 12
bookmarks
saving 113
TTY adapter 135
activate
using 112
browser
options 110
set up 109
business cards
receiving 106
alarm clock 100
call forwarding 53
keyguard 74
adapter
for TTY connection 135
advanced calling features 49
alarm clock 100
alarm clock, turning off 101
alternate formats
audio cassette 6
e-text 6
large print 6
requesting 6
antenna
sending 105
C
calculator 102
call forwarding 52
call history 45
call lists, clearing 46
call timers
clearing 48
turning on 48
call waiting 50
contact with 17
location 17
[ 156 ]
caller ID 56
feature code 56
calling card
choosing 55
currency
calculating 103
D
make a call 55
saving information 54
use 54
deactivate
calling features, advanced 49
calls
keyguard 74
digital data 107
digital talk times 131
download software 107
make and answer 19
calls, restricting 75
car kit 136
care and maintenance 122
carry case 134
carrying case 14
characters, entering 32
charge the battery 12
charger
ACP-7U 132
for travel 132
information 130
charging times 131
chat 94
E
e-mail messages 92
emergency calls 126
enter
characters 32
letters and numbers 30
numbers 32
punctuation 32
spaces 32
clock
network update 68
set the format 68
show 68
enter letters 31
color covers 137
conference calls 51
Connecting to a PC 107
contacting Nokia 10
contacting your service provider 10
Content Copier (PC Suite) 107
contrast, adjusting 15
convert currency 103
enter names and numbers 30
entering letters and numbers 31
erase
mistakes 33
names and numbers 42
text messages 90
erase names or numbers 42
[ 157 ]
F
H
factory settings, restoring 72
FAQ 116
headset 134
1-touch dial 117
call timers 118
contrast 118
setup 14
help 23
ESN 118
model number 117
phone memory 118
redial 117
I
icons 4
ringing tone 116
ringing volume 116
security code 116
serial number 118
voice mailbox 117
folder
information
adding 30
Infrared 104
erase messages from 91
folders
archive 86, 90
for text messages 86
inbox 86
message capacity 86
outbox 86
templates 86
use of 86
activating 104
connecting to a PC 107
receiving a business card 106
sending a business card 105
sending a reminder note 106
status 105
full memory 90
K
G
keyguard
activate 74
games
answer call while active 74
deactivate 74
keypad lock 74
keypad lock, how to 116
keypad tones, setting 65
keys and features 16
Pairs II 114
playing 114
Snake II 115
Space impact 114
starting 114
glossary 119
[ 158 ]
keys, learning 18
keys, selection 23
names and numbers
saving 38
saving quickly 38
storing 38
L
label 9, 10
network service features 83
network update of the clock 68
language setting 67
LCH-9 rapid charger 133
letter case, changing 33
letters, entering 31
lights, car kit 71
lock the keypad 74
loopset 7
notes
how it works 7
adding 78
LPS-3 7
number types 43
numbers, add to message 37
numbers, entering 32
M
make and answer calls 19
maximum characters
in text messages 35
memory is full 90
memory status, checking 44
menu number and scroll bar 21
menu tips 24
menus, phone 23
message alert tone, setting 65
O
options, while in a call 49
P
messages
PC Composer (PC Suite) 107
PC Connectivity 107
PC Suite
checking 60
text 85
messages, checking 60
missed calls, checking 45
mistakes, erasing 33
mobile holder 135
modem setup 107
Content Copier 107
Instructions 107
PC Composer 107
PC Sync 107
PC Suite (application) 107
PC Sync (PC Suite) 107
personalize phone settings 67
phone basics 16
N
name or number edit 42
[ 159 ]
Phone book
entering 39
punctuation, entering 32
Q
erasing 42
menus 40
opening 38
save an entry 39
R
save text entry 39
storing names and numbers 38
use number 112
redial 53
reference information 121
reminder, adding 77
reminders 106
views 41
phone book menu 29
phone book menu options 29
phone book, erasing 42
phone help 23
remove the battery 12
ring volume 64
phone memory, when full 90
phone menus 23
phone security, managing 73
phone symbols 21
picture messages
sending with text 96
viewing 96
play games 114
ring volume, setting 64
ringing tone, setting 63
ringing tones
power on your phone 14
predictive text 34
tips for 36
discarding 100
downloading 99
receiving 99
saving 99
turning off 36
turning on 36
prepaid access numbers, saving 81
prepaid account, adding money to 81
prepaid balance, checking 82
prepaid services 80
primary number, specifying 44
profile
rings and tones 62
roaming 84
S
safety information 123
customizing 62
defined 62
search for network 83
renaming 66
selecting 62
[ 160 ]
security code
start screen
changing 73
default 73
about 20
indicators 20
security code, changing 73
selection keys 23
send and receive
business cards 98
data 104
reminders and notes 78
send own number 56
sending
menu number 21
system selection 83
T
e-mail 92
service features, network 83
service provider
talk times
analog 131, 131
differences 6
templates, using 93
terms 3
text entry, saving 39
text message capacity 86
text messages
about 85
signing up 5
service provider, contacting 10
services menu 110
set the ring volume and tone 64
set up
your headset 14
your phone 11
settings, personalizing 67
shortcuts 24
shortcuts, list of 25
software download 107
spaces, entering 32
special characters 33
special features 98
specify a primary number 44
speed dial 69
as e-mail 92
communicating with 85
erasing 90
forwarding 92
length 85
maximum characters 35
options 87
recipients 85
replying 91
resending 88
standby and talk times 131
standby times
writing and sending 86
time, setting 100
touch tones
analog 131
digital 131
length 58
[ 161 ]
manual 58
sending 59
setting 57
X
storing 58
storing with numbers 58
troubleshooting 140
TTY 7
end a call 9
make a call 8
receive a call 9
TTY adapter 135
TTY communication 135
TTY contact 6
turn on your phone 14
U
underlined words 36
understanding wireless
network services 5
updates to this guide 5
use the headset 14
V
vibrating alert, setting 64
voice mail greetings 61
voice mail, setting up 60
voice mail, using 60
voice messages, listening to 61
volume, adjusting 15
W
WAP 108
warning and game tones, setting 65
warranty 141
web address for updates 114
welcome note, adding 69
wireless modem setup 107
[ 162 ]
Para obtener un manual del usuario en español favor de
llamar o enviar un fax al teléfono 1-888-NOKIA-2U,
fax 813-249-9619.
[ 163 ]
[ 164 ]
Thank you for purchasing your
new Nokia 3361 phone.
We’re here for you!
www.nokiahowto.com
Learn how to use your new Nokia phone.
www.nokia.com/us
Get answers to your questions.
Register for your phone’s warranty
so we can better serve your needs!
NOKIA INC.
7725 Woodland Center Boulevard, Suite 150, Tampa, FL 33614
Phone: 1-888-NOKIA-2U (1-888-665-4228) Fax: 1-813-249-9619
Text Telephone/Telecommunication Device for the Deaf (TTY/TDD) Users:
1-800-24-NOKIA (1-800-246-6542)
9357902
|