QUICK REFERENCE GUIDE
MITEL
Turning the Handset On/Off
Transferring a Call
1. Press the More softkey.
2. Select New Call.
3. Dial the number to which you want to
5603 Wireless Handset
1. Press and hold the On-hook key
until “Switch on/off is displayed.
2. Press “Yes/No.”
transfer the call and press Call.
1 Earpiece Speaker
4. Select Release to connect the two parties.
Making a Call
2 Softkeys
3 Off-Hook Key
4 Voice Mail Access
5 Key Lock and Upper/Lower Case
6 Space
OR
Dial the number and press
of the called party is displayed if available.
OR
. The name
Wait for an answer, announce the transfer
and then select Release.
Press
to open the call list and use the
7 Microphone
Conference
Navigation key to scroll the list of your last
8 Sound Off Key
9 Tactile Indicators
10 On-Hook and On/Off Key
11 Navigation Keys
12 Display
twenty calls. Press
OR
to dial.
1. Press the More softkey.
2. Select New Call to put the current call on
hold.
1. Press the Menu softkey.
2. Select Contacts, and select Call contact.
3. Select contact from list.
3. Dial the number of the third party.
4. Wait for an answer.
13 Headset Connector
14 LED
4. Press
or Call to dial the number.
5. Press More and then select Join to
conference all the parties together.
Answering a Call
Rejecting a Call
•
Press
to answer a call in normal
mode.
Display Icons
•
When the ring signal sounds, press
Call information will be stored in the
Call list.
OR
Signal Strength Indicator
Battery Icon (fully charged)
Battery Icon (discharged)
Voice Mail
•
Press the
Handsfree key to answer
Keypad Locked
in speaker mode.
Adjusting Volume Levels
Phone Lock
Ending a Call
Press to end a call.
To adjust earpiece volume
during a call:
Sound Off
Microphone Muted
•
•
Press upper and lower navigation key
arrows to increase/decrease volume.
Missed Call
Loudspeaker On
Loudspeaker Off
Microphone Off
Placing a call on Hold
Incoming Call
Outgoing Call
System Connection
To change ringer volume:
1. Press the More softkey.
2. Select Hold/Retrieve to put the call on
hold.
•
In the menu, select Settings.
Headset Connected
•
•
•
Select Sound & Alerts.
To retrieve the Held call:
Select Volume.
1. Press the More softkey.
Use the navigation key arrows to adjust
selected volume and press Back to save.
2. Select Hold/Retrieve to retrieve the call
on hold.
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2010, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
|