|
Pocket PC Phone User Manual
Copyright Information
Microsoft, ActiveSync, Outlook, Pocket Outlook, Windows, Windows NT, and the Windows logo are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are
licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.
1
Finding and Organizing Information......................................................................... 31
Changing the Default Button Settings...................................................................... 35
Chapter 4: Phone........................................................................................39
Places where contacts can enter your device and be stored…………………………………………… ... 52
E) Additional Dialing Information.............................................................................. 61
3
Pocket Excel....................................................................................................... 90
Picture................................................................................................................... 95
Reset the Pocket PC Phone and Clear Memory....................................................... 98
Screen is Blank......................................................................................................... 100
5
European Union Notice............................................................................................ 103
Safety Precautions for Power Supply Unit............................................................. 110
Pocket PC.................................................................................................................. 112
6
Chapter 1: Getting Started
Welcome
Congratulations on the purchase of your Pocket PC phone. With integrated wireless voice and data capabilities you
can keep your most important business and personal information up to date and close at hand. And with the power of
Microsoft® ActiveSync® you can synchronize and download information on your desktop or laptop computer with
your handheld device. With your Pocket PC you can:
• Make and receive phone calls.
• Instantly view the day’s appointments with the touch of a button.
• Send and receive e-mails.
• Download web pages.
• Make handwritten notes
Finding Information
This book describes your device hardware, provides an overview of the programs on your device, and explains how to
connect your device to a PC, a network, or the Internet. For instructions on setting up your device, see the Quick
Start Guide. The following table is a guide to additional information to help you use your device.
For information on:
See this source:
Programs on your device
This User’s Guide and device Help. To view
Help, tap
and then Help.
Additional programs that can be installed on the The Pocket PC Companion CD.
device
Connecting to and synchronizing with a PC
The Quick Start Guide or ActiveSync Help on
your PC. To view Help, click Help and then
Microsoft ActiveSync Help.
Last-minute updates and detailed technical
information
The Read Me files, located in the Microsoft
ActiveSync folder on the PC and on the Pocket
PC Companion CD.
Up-to-date information on your Pocket PC
Product & technical support information about
your Power PC Phone other Audiovox
Pocket PC devices.
http://www.microsoft.com/mobile/pocketpc
http://www.audiovox.com/pda
7
Chapter 2: Hardware Features
Your device has hardware buttons, and a stylus for selecting items and entering information.
Front Panel Components
6.
5.
7.
4.
8.
9.
3.
2.
1.
14.
10
13.
11.
12.
1
2
3
4
Volume. Press to adjust the volume of your device.
Record. Press to record a voice note.
Infrared Port. Enables you to exchange file(s) or data with other devices without cables/ wires.
GPS Receiver. This is your GPS receiver for location-based services.
5
6
Contacts. Press for quick access to your Contacts.
Power Button. Press to turn on/off your pocket PC
Backlight. Press and hold to turn the back light on/off.
Even if the power is turned off, pressing any program button turns the power on and the program screen is
displayed.
When using the device under high ambient temperatures and the temperature inside of the device goes up
(to about 144°F or more), the power is forcibly turned off. In this case, after the temperature inside of the
device cools down, turn the power on and use the device under appropriate ambient temperatures.
(144°F=62°C)
7
Speaker. Use to listen to audio media or a phone call.
8
8
9
Notification LED:
a) Flashing Green (every 3 seconds): CDMA network Signal
b) Flashing Green (every second): Notification Alarm Reminder
c) Steady Red: Built-in battery empty
d) Flashing Red: Low battery
e) Steady Amber: Built-in battery charging
f) Steady Green: Built-in battery Fully charged
Calendar. Press to quickly access the Calendar.
10 End. Press to end a call.
11 Navigation Pad:
Allows you to move up/ down and left/ right through any of the drop down menus or program instructions;
select an item by pressing in the center.
Left: When in the Dialer screen, press once to access the Speed Dial feature.
Right: When in the Dialer screen, press once to access the Call History feature.
12 Microphone. Speak here when receiving/ making a phone call or voice recording.
13 Send: Press to take an incoming call or to dial a number.
Speakerphone. Press and hold to activate speakerphone mode.
14 Touch Screen. For handwriting, drawing or to make a selection with the stylus.
Back Panel Components
2.
1.
2.
Antenna, Stylus Slot and Stylus. The antenna has a neatly hidden slot for housing the stylus.
Main Battery Unit. The main battery is housed permanently inside the device. It should only be changed
through an authorized sales center.
9
Bottom Edge Components
2.
3.
1.
5.
4.
1
Soft Reset. To reset the device, press the end of your stylus into the hole.
Sync Connector. Use this connector when synchronizing/ transmitting data or recharging.
2
Earphone Jack. Allows you to listen to audio media or use the phone hands-free kit.
3
4
Battery On/ Off Switch. To return the device to its original factory settings, simultaneously press here with the
end of the top-half of your stylus and hold down the power button.
Battery Off will wipe all the data from your device.
5
MMC and SD Card Slot. Insert either MMC or SD cards in this slot.
Accessories
Stylus
Only use the Stylus on the touch-screen for menu selection or data input. It can be used to the following ways:
• Tap:
• Drag:
Touch the screen once with the stylus to open items and select options.
Hold the stylus on the screen and drag it across to select text and images. Drag in a list to select
multiple items.
• Tap and hold:
Tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up
menu that appears, tap the action you want to perform.
•
Only use the supplied stylus on the touch-screen. If the stylus tip becomes damaged, replace it with a new
one. Using a ballpoint pen or damaged stylus may damage the screen.
10
USB Cradle
•
•
•
Your Pocket PC Phone comes with a USB cradle. This allows
you to recharge your Pocket PC Phone, as well as synchronize
information between your Pocket PC and a PC using
ActiveSync.
When you insert the device into the USB cradle, make sure that
the connector on the cradle is inserted into the port on the
bottom of the device. Data cannot be transferred if the
connection is not made.
To synchronize, the USB Cradle must be plugged into an
available USB port on your PC.
Battery Life
Your Pocket PC Phone contains a rechargeable Lithium polymer battery, which is housed permanently in your device.
After years of continual use and recharging, the battery will become unusable and should be changed through a
service center. While you are using your device the amount of power consumed depends on whether you are talking
on the phone, using the PDA functions or if the device is on standby. The estimates for battery life – talk-time: up to 4
hours, PDA: 15-16 hours and standby: 145 hrs – are based on you only using these individual functions. If you will be
continually interchanging between these features and functions, the estimates will vary.
YOUR POCKET PC CONTAINS A LITHIUM POLYMER BATTERY PACK. THERE IS
A RISK OF FIRE AND BURNS IF THE BATTERY PACK IS HANDLED IMPROPERLY.
DO NOT DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS,
OR DISPOSE OF IN FIRE OR WATER. DO NOT ATTEMPT TO OPEN OR SERVICE
THE BATTERY PACK. REPLACE ONLY WITH THE BATTERY PACK DESIGNATED
FOR THIS PRODUCT. DISPOSE OF BATTERIES PROPERLY.
Recharging the Battery
It is extremely important that you remember to charge your battery. Your device does not have a hard drive - all your
data and any new programs you install are stored in RAM. In the event that the battery loses all its power, the data and
new programs mentioned above will be erased – only the default programs installed when you bought the device will
remain. You can recharge your device in the following ways:
11
•
Place your Pocket PC Phone in the
cradle and then connect the cradle
to an external power source. The
first time you use it, charge for three
to four hours. Then, place it in the
cradle for a short time each day to
recharge it to full capacity.
AC Adapter plugs into
the back of the cradle.
•
You can plug the AC adapter into the
optional USB/Serial cable head and
then connect your Pocket PC Phone
directly to an external power source.
Plug into your
Pocket PC
Phone.
USB
synchronization
cable.
Plug the AC
adapter into a
socket.
•
You can plug the AC adapter into the
optional DC Converter and then
connect your Pocket PC Phone
directly to an external power source.
To your Pocket PC Phone
To AC adapter
12
When Your Battery Is Low
Your device has only one battery. However, a portion of that battery is saved as back-up. If the battery drains lower,
your Pocket PC Phone displays a warning message. If this occurs, save any unsaved data you are working on,
perform a synchronization with your PC, then turn off your Pocket PC Phone. Don’t try to restart your Pocket PC
Phone until you have connected to external power. If your Pocket PC Phone does shut down, the back-up portion of
your battery will protect your data for about 72 hours.
Note:
Charge the battery in an environment between 41°F - 95°F (5°C and 35°C). Temperatures outside this
range may pause the charging process.
When charging the battery for the first time, fully charge the battery. If the battery is not fully charged, the
remaining battery power will not be accurately displayed.
Maximizing the Battery Operating Time
•
•
Whenever possible, use the device with the AC Adapter – especially when it is connected to your computer.
Select the short powered-off time in the setting menu. This will shorten the time the unit will remain on if not
used.
•
•
•
Turn off the front light.
Set the screen brightness to power savings mode (front light off) or shorten the front light turn-off time.
For optimal performance use in an environment between 59°F - 77°F (15°C and 25°C). Anything outside this
temperature range may decrease the operating time.
Optional Accessories
A) SD and MMC Cards
Your device has an expansion slot compatible with a range of SD and MMC Memory cards, which are primarily used
to backup or transfer files and data.
To insert or remove a memory card:
1. Push the memory card into slot (see above) until it
clicks into place. (The card is secure when it is not
protruding from the base).
2. To remove the card, push it in and then release, letting
the card spring out.
When you receive your device there will be a piece of
plastic in the slot, remove using the same method
described in “2” above.
13
C) USB cable
•
The USB cable allows you to synchronize with your
desktop without the cradle. The DC converter at the
head of the cable, combined with an AC adapter, also
allows you to recharge your device.
D) DC Connector
•
The DC Connector in combination with the AC adapter
allows you to recharge your device without the cradle.
E) Serial Cable
•
The Serial cable allows you to synchronize with your
desktop without the cradle. The DC converter in the
head also allows you, in combination with and AC
adapter, to recharge your device.
14
Chapter 3: About Your Pocket PC Phone
Resetting the Pocket PC Phone and Clearing Memory
You can perform a soft reset or a hard reset – a soft reset restarts your device and a hard reset switches the battery off.
With a soft reset, some data may be lost in the programs that were open when the reset was performed. However, by
performing a hard reset, all the data and new programs that you have added will be erased and the device will be
restored to its factory setting – i.e. only programs installed at the factory will remain. With this in mind, it is important
not to think about a hard reset as you would restarting, shutting down or even improperly switching off your desktop,
but rather like a complete crash that requires you to erase your OS. Therefore, it is extremely important that you
regularly back up data on your device to a SD card in the event you have to perform a hard reset.
Performing a soft reset:
If your Pocket PC Phone responds slowly, stops responding or freezes, try performing a soft reset. A soft reset causes
the Pocket PC Phone to restart and re-adjust memory allocation. Unsaved data in open windows may be lost.
•
Use the stylus to press and hold the Reset button. (For details on finding soft reset, see, “Chapter 2, Bottom Edge
Features.”)
Performing a hard reset:
A hard device reset clears memory, deletes all data and restores the Pocket PC Phone to
its default settings. Programs installed at the factory remain, while data you have created
and programs you have installed are erased.
1.
Unscrew the stylus and use the smaller point of
the top-half.
2.
Simultaneously press the battery switch and hold
down the power switch to turn it off. Repeat to turn
it back on.
15
Backing up Files
Because any new programs or data are stored in RAM, and therefore will be lost if you have to perform a hard reset or
your device loses all power for any other reason, it is absolutely paramount that you backup files to your computer, a
memory card or Flash ROM. When you are at your desktop you can synchronize with your computer to backup files,
however, if you are away from home and unable to access your desktop, you will need to backup files to an SD or
MMC card or Flash ROM. In the former case, you can backup individual files in Word or Excel or all files in SD backup.
In the latter case, through the program Permanent Save, it is possible to backup and then restore Contacts, Calendar,
Internet and E-mail Settings.
To save Word or Excel files to a memory card:
1. In application programs (e.g. Pocket Word or Excel), press
Tools, Options.
2. Tap the drop down menu box under Save To and select Storage
Card.
To backup or restore your system using SD Backup:
1. Push the memory card into slot (see above) until it clicks into
place. The card is secure when it is not protruding from the
base.
2. Tap
tab.
, Programs, SD Backup then the Backup or Restore
3. If you have inserted the SD card properly it will appear next to
Target.
4. Make sure there are no application programs running in the
background, then tap Start.
16
To backup to Flash ROM:
1. Tap
, Settings, System and then Permanent Save.
2. To backup Contacts or Calendar tap the PIM tab, and then
check one or both of the boxes.
When you select to backup Contacts and Appointments,
your device will automatically backup newly added contacts
and appointments. This will not happen for connections: if
you add another connection you will need to back it up
manually.
To restore from Flash ROM:
1. Tap
, Settings, System and then Permanent Save.
2. To restore Contacts or Calendar tap the PIM tab, and then
check one or both of the boxes.
17
Screen Tapping, Calibration and Re-calibration
When you first startup your Pocket PC Phone, you will be asked to calibrate the screen by tapping the center of a
cross with your stylus as it moves around the screen. This process ensures that when you tap the screen with your
stylus the item tapped is activated. If, however, when you are using your Pocket PC Phone, you discover tapping an
item doesn’t bring up the appropriate response, it means your Pocket PC Phone has lost calibration.
To recalibrate the screen:
1.
2.
Tap Settings, System and then Screen.
As described above, tap the center of the cross to with your
stylus as it moves around the screen.
18
Today Screen
When you turn on your device for the first time each day (or after a period of inactivity), the Today screen appears. You
can also access it by tapping
the day.
and then Today. The Today screen provides a glance at important information for
Following are some of the status icons you may see.
Status
Icon
Meaning
Turns all sounds on and off and adjusts
the volume level.
Main battery low
Main battery very low
Active connection
Server synchronization in process
Instant message received
E-mail message received
Shows the connection to your mobile
phone service provider is on and the
strength of the signal
Indicates your phone is switched off.
If there is not enough room for all the notification icons that need
to appear, the Notification icon,
view all notification icons.
, will display. Tap the icon to
19
Programs
Switch from one program to another by using the
menu. (You can customize which programs you see on this
menu. For information, see “Adjusting Settings,” later in this chapter.) To access some programs not listed on the drop
down menu, tap , Programs, and then the desired program.
You can also switch to another program by pressing any of the program buttons located on the front or side of the
device. The icons on the buttons identify the programs they switch to.
Some programs have abbreviated labels for check boxes and drop
down menus. To see the full spelling of an abbreviated label, tap
and hold the stylus on the label. Drag the stylus off the label so that
the command is not carried out.
The following table contains a partial list of programs that are on your device. Look on the Pocket PC Companion CD
for additional programs that you can install onto your device.
Icon
Program
Description
ActiveSync
Synchronize information between your device and your computer.
Calendar
Contacts
Keep track of your appointments and create meeting requests.
Keep track of your friends and colleagues.
Inbox
Send and receive e-mail/ SMS messages.
Pocket Internet Explorer
Browse Web and WAP sites, and download new programs and files from the
Internet.
Notes
Create handwritten or typed notes, drawings, and recordings.
Tasks
Keep track of your tasks.
Pocket Excel
Create Excel spreadsheets or view and edit Excel spreadsheets created on
your computer.
MSN Messenger
Pocket Word
Send and receive instant messages with your MSN® Messenger contacts.
Create new documents or view and edit Word documents created on your
computer.
Phone
Make and receive calls, swap between calls and set up conference calling.
SD Backup
Backup your Pocket PC Phone files to an SD card.
Windows Media Player
Enables the multimedia function on your Pocket PC Phone.
20
Navigation Bar and Command Bar
•
•
The navigation located at the top of the screen displays
the active program and current time, and allows you to
switch programs and close screens.
The command bar located at the bottom of the screen,
performs tasks in the open program and includes menu
names, buttons and the Input Panel button. To create a
new item in the current program, tap New. To see the
name of a button, tap and hold the stylus on the button.
Drag the stylus off the button so that the command is
not carried out.
Pop-up Menus
•
Pop-up menus provide quick access to select an
action for an item and vary with each program. For
example, you can use the Pop-up menu in the
contact list to quickly delete a contact, make a copy
of a contact, or send an e-mail message to a
contact. To access a Pop-up menu, tap and hold
the stylus on the item name that you want to
perform the action on. When the menu appears, lift
the stylus, and tap the action you want to perform.
Or tap anywhere outside the menu to close the
menu without performing an action.
21
Notifications
Your device reminds you in a variety of ways when you have something to do or receive a SMS. For example, if
you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock, you’ll be notified in
any of the following ways:
•
•
•
A message box appears on the screen.
A sound, which you can specify, is played.
A light flashes on your device.
•
The device vibrates.
To choose reminder types and sounds for your device, tap
and then Settings. In the Personal tab, tap Sounds
& Notifications. The options you choose here apply throughout the device.
Enter Information on Your Device
You have several options for entering new information:
•
•
•
Use the input panel to enter typed text, either by using the soft keyboard or other input method.
Write directly on the screen.
Draw pictures on the screen.
•
•
Speak into your device microphone to record a message.
Use Microsoft ActiveSync to synchronize or copy information from your PC to your device. For more
information on ActiveSync, see ActiveSync Help on your PC.
Entering Text Using the Input Panel:
•
•
Use the Input Panel to enter information in any program
by either typing using the soft keyboard, or by writing
using the Letter Recognizer, Block Recognizer or
Transcriber. With any of the options, the characters will
appear as typed text on the screen.
To show or hide the input panel, tap the Input Panel
button. Tap the arrow next to the Input Panel button to
see your choices.
22
•
When you use the input panel, your device anticipates
the word you are typing or writing and displays it above
the input panel. When you tap the displayed word, it is
inserted into your text at the insertion point. The more
you use your device, the more words it learns to
anticipate.
•
To change word suggestion options, such as the
number of words suggested at one time, tap
,
Settings, Personal tab, Input, and then the Word
Completion tab.
Typing with the soft keyboard:
•
When you use the input panel, your device anticipates
the word you are typing or writing and displays it above
the input panel. When you tap the displayed word, it is
inserted into your text at the insertion point. The more
you use your device, the more words it learns to
anticipate.
23
Using Letter Recognizer:
With Letter Recognizer you can write letters using the stylus just as you
would on paper.
1. Tap the arrow next to the Input Panel button and then Letter
Recognizer.
2. Write a letter in the box -- it will automatically be converted to typed text
on the screen.
For specific instructions on using Letter Recognizer, with Letter Recognizer
open, tap the question mark next to the writing area.
Using Block Recognizer:
With Block Recognizer you can use the stylus to input character strokes
similar to those used on other devices.
1. Tap the arrow next to the Input Panel button and then Block
Recognizer.
2. Write a letter in the box -- it will automatically be converted to typed text
on the screen.
For specific instructions on using Block Recognizer, with Block Recognizer
open, tap the question mark next to the writing area.
24
Switching to Transcriber:
With Transcriber you can write anywhere on the screen using the stylus just
as you would on paper. Unlike Letter Recognizer and Block Recognizer,
you can write a sentence or more of information. Then pause and let
Transcriber change the written characters to typed characters.
1. Tap the arrow next to the Input Panel button and then Transcriber.
2. Write anywhere on the screen.
For specific instructions on using Transcriber, with Transcriber open, tap
the question mark in the lower right hand corner of the screen.
To punctuate in Transcriber:
1. Tap the keyboard on the toolbar and select the desired punctuation
mark.
2. Tap OK to hide the keyboard.
25
To learn how to write a letter in Transcriber:
1. Tap “a” on the toolbar.
2. In the screen that appears, select the letter you want to learn about, and
then tap on one of the examples displayed to the left.
For specific instructions on using Transcriber, with Transcriber open, tap the
question mark in the lower right hand corner of the screen.
Click on a letter for a
demonstration
Selecting typed text:
If you want to edit or format typed text, you must select it first.
•
Drag the stylus across the text you want to select. You can cut, copy, and
paste text by tapping and holding the selected words and then tapping
an editing command on the Pop-up menu, or by tapping the command
on the Edit menu.
.
To change word suggestion options, such as the number of words suggested at one
time, tap , Settings, Personal tab, Input, and then the Word Completion tab.
Editing text:
Each input program provides curser keys to move through text and backspace so that you can correct spelling,
grammar or insert additional information. Alternatively, you can use your stylus to insert copy. After you make an
insertion you can use any of the input methods described above to add additional text at the insertion point.
26
Writing on the Screen
In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and
Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format
what you’ve written and convert the information to text at a later time.
Writing on the screen:
•
To switch to writing mode tap the Pen button. Lines will appear on the
screen to help you write.
Tap the Pen button and use your stylus like a pen.
Some programs that accept writing may not have the Pen button. See the
documentation for that program to find out how to switch to writing mode.
Selecting writing:
If you want to edit or format writing, you must select it first.
1.
2.
Tap and hold the stylus next to the text you want to select until the
insertion point appears.
Without lifting, drag your stylus across the text you want to select.
If you accidentally write on the screen, tap Edit, then Undo and try again.
You can also select text by tapping the Pen button to deselect it and then
dragging the stylus across the screen.
You can cut, copy, and paste written text in the same way you work with
typed text: tap and hold the selected words and then tap an editing
command on the Pop-up menu, or tap the command on the Edit menu.
27
Converting writing to text:
1.
2.
Tap Tools and then Recognize.
If you want to convert only certain words, select them
before tapping Recognize on the Tools menu (or tap
and hold the selected words and then tap Recognize
on the Pop-up menu). If a word is not recognized, it is
left as writing.
3.
If the conversion is incorrect, you can select an
alternative word from a list of alternates or return to
the original writing. To do so, tap and hold the incorrect
word (tap one word at a time). On the Pop-up menu,
tap Alternates. A menu with a list of alternate words
appears. Tap the word you want to use, or tap the
writing at the top of the menu to return to the original
writing.
For best recognition:
1.
Write neatly.
2.
Write on the lines and draw descanters below the line.
Write the cross of the “t” and apostrophes below the
top line so that they are not confused with the word
above. Write periods and commas above the line.
3.
4.
For better recognition, try increasing the zoom level to
300% using the Tools menu.
Write the letters of a word closely and leave big gaps
between words so that the device can easily tell where
words begin and end.
5.
Hyphenated words, foreign words that use special
characters such as accents, and some punctuation
cannot be converted.
6. Any changes made to a word after you attempt to
recognize it (such as changing a “3” to an “8”) will not
be included if you attempt to recognize it again.
28
Drawing on the Screen
Draw on the screen in the same way that you write on it. The only difference is how the items are selected and edited.
For example, drawings can be resized - writing cannot.
Creating a drawing:
•
A drawing box will appear when you cross any three
ruled lines on your first stroke. Subsequent strokes in or
touching the box become part of the drawing. Drawings
that do not cross three lines will be considered writing.
Selecting a drawing:
If you want to edit or format a drawing, you must select it
first.
•
Tap and hold the stylus on the drawing until the
selection handle appears. To select multiple drawings,
deselect the Pen button and then drag to select the
drawings you want.
•
You can cut, copy, and paste selected drawings by
tapping and holding the selected drawing and then
tapping an editing command on the Pop-up menu, or by
tapping the command on the Edit menu. To resize a
drawing, make sure the Pen button is not selected, and
drag a selection handle.
The box indicates the boundaries of the drawing.
You may want to change the zoom level so that you can more easily
work on or view your drawing. Tap Tools and then a zoom level.
29
Recording a Message
A message can be recorded in any program where you can write or draw on screen. In Calendar, Tasks and
Contacts, you can include a recording in the Notes tab. In the Notes program, you can either create a
stand-alone recording or include a recording with a written note. With the Inbox program, a recording can be
added to an e-mail.
Creating a recording:
1. Hold your device’s microphone near your mouth or
sound source.
2. Press the Record button on the left side of your
device.
3. Tap
to make your recording.
4. Tap
to stop recording. Two beeps will sound.
The new recording appears in the note list or as an
embedded icon. To play a recording, tap it in the list
or tap its icon in the note.
You can also make a recording by tapping the Record button on the Recording toolbar.
Using My Text:
•
My Text quickly inserts preset and frequently used
messages into the text entry areas of Inbox or MSN®
Messenger. To insert a message, tap My Text and
select a message.
•
To edit a My Text message, tap Edit and then Edit My
Text Messages. Select the message you wish to edit
and make desired changes.
You can add text after inserting a My Text message.
30
Finding and Organizing Information
The Find feature on your device helps you quickly locate information.
•
On the
menu, tap Find. Enter the text you want to find, select a
data type, and then tap Go to start the search.
To quickly find information that is taking up storage space
on your device, select Larger than 64 KB in Type.
•
File Explorer can also find files on your device and organize them
into folders. To access from the
menu, tap Programs, then
File Explorer. To move files in File Explorer, tap and hold the item
you want to move then tap Cut or Copy. Go to the file where you
want to move the document and tap Paste on the pop-up menu.
•
•
Enter a file name, select a file type then press Go.
The name of the file will appear in the box entitled Results.
31
Managing Memory
Memory on your Pocket PC Phone is shared between storage memory and program memory. Storage memory is
used to store the information you create and programs you install. Program memory is used to run programs on your
Pocket PC Phone. Pocket PC Phone automatically manages the allocation between storage and program memory.
To view memory allocation and availability:
Tap
, Settings, System and then Memory.
Finding Space in Storage memory
When memory is low, your Pocket PC Phone may not be able to automatically adjust the allocation. If you receive a
message stating that storage or program memory is unavailable, try the following solutions.
Making storage memory available:
1. Move data to a SD storage card (see page 16.)
2. Tap
, Programs, and then File Explorer. Tap and hold the file you want to move, then tap Cut. Browse the
My Documents folder in the storage card folder, tap Edit, and then tap Paste. Files stored in folders other than
My Documents or stored in folders within subfolders of My Documents may not show up in the list view of some
programs. When using Notes, Pocket Word, or Pocket Excel, you can also move files by opening the item and
tapping Tools or Edit and then Rename/Move.
3. Move e-mail attachments. In Inbox, tap Tools and then Options. On the Storage tab, select Store attachments
on storage card. All attachments are moved to the storage card, and new attachments are automatically stored
on the storage card.
4. Set programs such as Notes, Pocket Word, and Pocket Excel to automatically save new items on the storage
card. In the program, tap Tools and then Options.
5. If you are copying files from your PC or another device to your Pocket PC Phone, try adjusting the slider in the
Memory setting. Tap
and then Settings. On the System tab, tap Memory and check whether the slider can
be adjusted manually before copying files.
6. Delete unnecessary files. Tap
, Programs, and then File Explorer. Tap and hold the file, and then tap
Delete on the Pop-up menu. To find your largest files, tap
and then Find. In the Type list, tap Larger than
64 KB, and then tap Go.
7. In Internet Explorer options, delete all files and clear history. In Internet Explorer, tap Tools and then Options.
Tap Delete Files and Clear History.
32
Customizing Your Pocket PC
You can customize your device by adjusting device settings and installing additional software.
Customizing the Today Screen
You can customize the Today screen in the following ways: change the background picture, select the information
you want displayed and in what order, and display future appointments.
Changing the background:
1. Tap Start, Settings, Personal and then Today.
2. On the Appearance tab, select the desired theme for
the background. If you have downloaded an image to
your device and want to use it as background, select
Use this picture as the background and tap
Browse to locate the desired file.
3. Choose a folder and type then tap find.
4. Tap the picture you want to use then tap OK.
To customize the information you want displayed:
1. Tap Start, Settings, Personal and then Today.
2. On the Items tab:
•
Uncheck a box to remove it from the Today
screen.
•
Change the order of how items appear by
selecting an item then tapping Move Up or
Move Down.
•
Choose to select or deselect Display Today
screen if device is not used for, and then
select a number of hours from the box below.
To customize Tasks or Calendar:
1. Open Tasks or Calendar, tap Tools and then
Options to further customize.
33
Adjusting Settings
You can adjust device settings to suit the way you work. To see available options, tap
, Settings, then the
Personal or System tab located at the bottom of the screen.
•
The following settings can be adjusted:
Icon
Program
Buttons
Description
To assign the application program to a hardware button.
Input
Menu
To setup the input method of your device.
To customize what appears on the
menu from the New button.
menu, and to enable a Pop-up
Owner Information
To enter your contact information.
Password
Phone
To limit access to your device.
To setup the phone function of your wireless feature.
Sound and notification
Today
To set the notification type, event, and volume.
To customize the look and the information that is displayed on the
Today screen.
Backlight
To customize the front light and turn on/ off brightness for power saving
purposes.
Clock
To change the time or to set alarms.
Power
To maximize battery life.
Regional settings
To customize the region and relative format for the region you use.
Remove programs
Screen
To save the limited memory, you can use this function to remove
application program(s) that are not frequently used.
To re-calibrate the screen tapping and enable/ disable Clear Type
feature.
34
Changing the Default Button Settings
The buttons on your device are default set for Calendar, Contacts and Phone. The phone buttons cannot be changed,
however, you can change the Calendar and Contacts buttons to open other programs.
1. Tap Start, Settings, Personal and then Buttons.
2. Select a button, a program in Button Assignment, and then tap OK.
Adding or Removing Programs
Programs installed on your device at the factory are stored on ROM (read-only memory) and cannot be
removed or accidentally lost. ROM programs can be updated using special installation programs with a *.xip
extension. Any programs and files added after factory installation are stored in RAM (random access
memory). As long as you have enough memory, you can install any program created for your device. To find
software for your device, visit the Pocket PC website at http://www.microsoft.com/mobile/pocketpc.
Note: If you update ROM programs using special installation programs with a *.xip extension, do not use the
backup data which you made before updating ROM programs.
Adding programs using ActiveSync:
Before installing a program on your device, the appropriate software will need to be installed on the computer.
1. Determine your device and processor type so that you know which version of the software to install. Tap
and
then Settings. On the System tab, tap About. In the Version tab, make a note of the information in Processor.
2. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see
a single *.xip, *.exe, or *.zip file, a Setup.exe file, or several versions of files for different device types and
processors. Be sure to select the program designed for the Pocket PC and your device processor type.
3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs
provide special installation instructions.
4. Connect your device and PC.
35
5. Double click the *.exe file.
•
If the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the
software has been installed on your PC, the installer will automatically transfer the software to your device.
•
If the file is not an installer, you will see an error message stating that the program is valid but it is designed
for a different type of PC. You will need to move this file to your device. If you cannot find any installation
instructions for the program in the Read Me file or documentation, use ActiveSync Explore to copy the
program file to the Program Files folder on your device. For more information on copying files using
ActiveSync, see ActiveSync Help.
Once installation is complete, tap
, Programs, and then the program icon to switch to it.
Adding a program directly from the Internet:
1. Determine your device and processor type so that you know which version of the software to install.
2. Tap
and then Settings. On the System tab, tap About. In the Version tab, make a note of the information
in Processor.
3. Download the program to your device straight from the Internet using Pocket Internet Explorer. You may see a
single *.xip, *.exe or *.zip file, a Setup.exe file, or several versions of files for different device types and
processors. Be sure to select the program designed for the Pocket PC and your device processor type.
4. Read any installation instructions, Read Me files, or documentation that comes with the program. Many
programs provide special installation instructions.
5. Tap the file, such as a *.xip or *.exe file. The installation wizard will begin. Follow the directions on the screen.
Adding a program to the Start menu:
1. Tap
, Settings, Menus, the Start Menu tab, and then the check box for the program. If you do not see the
program listed, you can either use File Explorer on the device to move the program to the Start Menu folder, or
use ActiveSync on the PC to create a shortcut to the program and place the shortcut in the Start Menu folder.
2. Using File Explorer on the device: Tap
, Programs, File Explorer, and locate the program (tap the folder
list, labeled My Documents by default, and then My Device to see a list of all folders on the device). Tap and
hold the program and tap Copy on the Pop-up menu. Open the Start Menu folder located in the Windows folder,
tap and hold a blank area of the window, and tap Paste on the Pop-up menu.
3. The program will now appear on the
menu. For more information on using File Explorer, see “Finding and
Organizing Information,” earlier in this chapter.
4. Using ActiveSync on the PC: Use the Explorer in ActiveSync to explore your device files and locate the
program. Right click the program, and then click Create Shortcut. Move the shortcut to the Start Menu folder in
the Windows folder. The shortcut now appears on the
menu. For more information, see ActiveSync Help.
Note: The Start menu is limited to 9 programs so when you add a program to it, another must be removed.
36
Removing programs:
•
•
Tap
then Settings. On
the System tab, tap
Remove Programs.
If the program does not
appear in the list of installed
programs, use File Explorer
on your device to locate the
program, tap and hold the
program, and then tap
Delete on the Pop-up
menu.
Setting a Password
Protect data and settings by choosing a password that will be requested every time the power is turned on.
1. Tap then Settings. On the Personal tab, tap Password.
2. Select the type of password you would like to use:
No Password: No password needed to access device
Simple 4 Digit Password: Password must be four numerals
Strong alphanumeric password: Password must be at least seven characters long and contain a combination of
uppercase letters, lowercase letters, numerals or punctuation.
3. In the Prompt if device unused for box select how long your device must be turned off before the password is
required to use your device.
4. Enter a password and tap OK.
5. Tap YES on the confirmation screen. The password is saved and the screen returns to the Personal tab screen.
•
Note: Record your password in a safe place. If you wish to change your password, you will have to know the
existing one to access the Password setting screen. If you forget your password, you will have to initialize the
device, which deletes all stored data and settings. If the power is off, you will not be able to answer or make a
phone call without entering your password.
You can automatically receive a call when Auto-Answer is activated. However, you cannot disconnect without
entering the password.
37
Setting the Backlight
1. Tap
then Settings. On the System tab, tap Backlight.
2. On the Battery Power tab check and select when you want the backlight to automatically turn off and when you
want it turned on.
3. On the External Power tab check and select when you want the backlight to automatically turn off and when you
want it turned on.
4. On the Brightness tab adjust the brightness level for battery power and external power.
5. When finished tap OK.
•
Note If the remaining battery power decreases, the brightness level may be lower than the selected setting.
Setting Power
1. Tap
then Settings. On the System tab, tap Power.
•
The Battery power remaining bar displays the remaining battery power. When the AC Adapter is used, the
battery charging mode is displayed, but the remaining battery power is not.
•
If you check Turn off device if not used for under On battery power and On external power, the device
will automatically turn off when it hasn’t been used for the amount time you select in the provided boxes.
Setting Memory
Memory for the device is automatically managed. You can adjust data storage memory, program running memory,
and confirm the amount of free space on a storage card.
To change memory allocation:
1. Tap
then Settings. On the System tab, tap Memory to display the Memory setting screen.
2. Drag the slider left or right to adjust the memory allocation between Storage and Program.
3. When finished, tap OK.
To confirm usage status of a storage card:
1. Tap
then Settings. On the System tab, tap Memory then the Storage Card tab on the bottom.
2. When finished, tap OK.
To release memory:
If memory is approaching full capacity, you can free up space by:
• Transferring data to a storage card or to your computer then delete it from your device.
• Deleting unnecessary files and programs.
• Quitting the program currently in use.
•
Note For more detailed information on operation method or releasing memory, tap
then Help.
38
Chapter 4: Phone
A) About Your Phone
As well all the standard features of a mobile phone - such as mailbox and Call History – there are several dialing
features unique to your Pocket PC Phone. For example, you can take notes while talking, and dial directly from
Microsoft.
Similar to a conventional mobile phone, you can also easily use one hand to access and navigate through the
important features of your device and make calls.
About The Dialer Screen
To access the Dialer Screen, tap
and then Phone, or press
. From the dialer screen you can:
ꢀ
ꢀ
ꢀ
Make calls
Access Call History, Speed Dial and Phone Settings
Find signal status information and important icons that tell you about your call.
This icon indicates a call is being made and the strength of the signal.
Shows voice
privacy is not
available
Last number details are
displayed here
For numbers you call
often
See all calls received, made
and missed.
Click Tools, Options to
access phone settings.
Contacts
39
The Navigation Pad and Dialing
2.
1.
7.
4.
6.
1.
Take Call – Press to take an incoming call.
Dialer Screen – Press to activate the dialer screen.
Speakerphone – Press and hold to turn on or off the speakerphone during a call.
Dial – Press to dial a number.
2.
3.
4.
5.
6.
7.
Scroll Up – Press to scroll up through a list.
End Call – Press to end a call.
Call History – After launching the dialer screen, press to enter the Call History feature.
Scroll Down – Press to scroll down through a list.
Center – Press to select an item from a menu or a screen.
Speed Dial – After launching the dialer screen, press to enter the Speed Dial feature.
The icons listed below may be seen in the top bar of the screen:
- Phone off (Flight Mode) or out of network service -- Tap to turn off flight mode.
- In network service -- Tap to turn on flight mode.
- Call Missed -- Tap this icon to view missed call(s) you missed.
- Unread E-mail or SMS -- Tap to view unread SMS or E-mail.
- Sync in progress -- This icon will disappear when you have finished syncing with a server.
- Shows your connection is at full strength.
40
Checking Your Phone Connection
The default settings for your device are programmed to assume you want to use your phone. Therefore, your device
will automatically connect your mobile phone and your service provider’s network.
Initially, the icon indicates that you are connected to your service provider’s network. After that, a full strength signal
is indicated by
and, as the strength of the signal diminishes so will the number of vertical bars in the icon with no
bars indicating no signal.
IN MANY COUNTRIES YOU ARE REQUIRED BY LAW TO TURN OFF YOUR
PHONE WHEN YOU FLY. TURNING OFF YOUR POCKET PC DOESN’T TURN
OFF YOUR PHONE; YOU MUST TURN OFF YOUR WIRELESS CONNECTION
TO YOUR OPERATOR’S NETWORK.
Turning On/Off the Flight Mode
To turn off your wireless connection to your operator’s network, you can switch your phone connection mode to be on
Flight mode. You can turn the Flight Mode on or off while keeping your actual device turned on.
1.
While using any program on your device, tap the phone signal icon
on the title bar at the top of the phone’s display.
2. Tap Turn on flight mode to turn off your phone connection from
the pop up menu.
3. After that, tap Turn off flight mode to re-activate your phone
connection when you need.
To receive calls when your device is turned off, leave the Turn
on flight mode.
41
Adjusting the Phone Volume
1. During a call, you can tap
or press the volume on the side bar of
your device. The left bar is for the device volume and the right is for
incoming call.
To adjust the conversation phone volume, you
must do it during a call. This 3rd volume option will
only appear in the volume tab during a call.
Back Spacing and Deleting
If you tap a wrong number when you are keying in, you can back space to erase individual numbers one at a time or
you can delete all the numbers in the window.
To backspace or clear numbers:
Tap here to back space
and erase numbers
individually.
Tapping Clear will
erase 852-585 as
will holding down
the backspace
key.
42
B) Basic Dialing Features
In this section you can find information on the basic features of your phone: making or answering a call, using the
speakerphone, making notes during a call, putting a call on hold, and using the conferencing facility. You can also
send SMS from the Dialer screen.
Making a call
With your Pocket PC Phone, you can make a call from the Dialer, Speed Dial, Call History, and Contacts.
Making a call from the Dialer:
1. To bring up the dialer screen, press
.
2. Tap the phone number into the keypad, then tap
or press
button.
The signal icon will change when
you are making a call.
The number you’re
dialing will appear
here.
When memory is full, a warning message will pop up indicating "Storage memory is critically low. If you don't
increase storage memory, you may not able to start some programs. ......" In this situation free memory space
(for more information see the sections on managing and clearing memory and removing programs).
43
Making a call from Contacts:
To make a call from Contacts:
1. Access Microsoft Contacts by pressing the Contacts Button or by tapping
in the dialer. Tap the contact you wish to call, and then tap
once to send to the dialer screen and once to call.
twice –
By default, the pop-up menu and
button will display Call Work Tel.
However, using either method below you can customize it so that the mobile
phone number or e-mail is displayed instead:
Either:
1. Select a contact in the contacts list and then press left or right on the
navigation pad – the number on the screen will change.
Or:
1. In the contacts list tap the “w” in the right column next to the contact you
want to customize. A pop-up menu will display the phone numbers and
e-mail addresses for this contact.
2. Tap on a function to operate it.
44
Making a call from Speed Dial (A):
Speed dial is a list you can create of frequently-dialed numbers. Information
on adding a number to Speed Dial is detailed later in this chapter.
By memorizing a contact’s position in the Speed Dial list you can dial the
number by simply entering its position number. For example, in the picture on
the left, Josh Burns is at position 4. To dial his number simply tap and hold 4
on the dialer keypad; if the number holds a position of 10 or more tap the first
number, and then tap and hold the second to dial.
Making a call from Speed Dial (B):
Alternatively, if you don’t remember the position of a number in the Speed
Dial list use the method below:
1. Go to Phone, press the left-side of navigation pad once, or tap
.
2. Use the navigation pad to find the number you want to dial, then press
.
45
Making a call from the Call History:
1.
2.
Go to Phone and press the right side of the navigation pad or
tap
.
Find the call details by first selecting the category it is filed under. For
example, if it is in All calls select All calls from the drop down menu in
the top-left corner.
3.
Use the navigation pad to find the number, then tap
the left of the number you wish to call.
or the icon to
Icon
is for incoming calls; icon
is for missed calls.
is for outgoing
calls and icon
Sending SMS in phone dialer:
1. Tap Tools, then Send SMS.
2. The screen on page 43 will appear.
3. In the To field, enter either an e-mail address or
SMS number of one or more recipients, separating
them with a semicolon, or select a name from the
contact list by tapping the Address Book button. All
e-mail addresses entered in the e-mail fields in
Contacts appear in the Address Book.
4. Compose your message. To enter preset or
frequently used messages, tap My Text and select a
message.
5. Tap Send when you’ve finished the message. If you
are working offline, a pop-up menu will appear
asking you if you want to connect to your ISP.
46
1. Whether you want to send or read E-mail or a SMS,
you can swap by tapping Services then choose
what service you want.
2. If you are sending an SMS message and want to
know if it was received, tap Edit, Options, and
select Request SMS text message delivery
notification before sending the message.
Enabling the Speakerphone Mode
Your device’s speakerphone mode allows you to talk hands-free and/or let other people listen to a call.
1.
2.
Wait until the phone is ringing.
Hold down
until the speakerphone comes on
appears in the top toolbar.
and the icon
3.
To turn off the speakerphone hold down
again.
Do not leave the phone in speakerphone
mode and hold it on your ear; the sound
will damage your ear.
47
To Answer or Reject a Call:
•
To answer a call, tap Answer, or press
.
•
•
To reject the call, tap Ignore or press
.
To turn off the ring of the incoming call, tap Silent
When you reject a call the caller will hear a busy tone.
To End a Call:
•
To end a call, press
or tap
.
Managing More Than One Call
Your device will notify you when you have another caller and you have the choice of rejecting or accepting the
incoming call. If you accept, you can then choose to swap between this caller and the original. You can also set up a
conference call between 3 parties (with conference calling you can create a conversation with up to 6 people).
48
To put a call on hold:
1.
If another person is trying to call you when you are talking on the phone
the pop-out screen to the left will appear.
2.
3.
To the take the 2nd call and put the 1st on hold, tap Answer
To end the 2nd call and go back to the 1st, tap
or
.
To swap between calls:
•
To swap between 2 callers, press
key.
or the
To change to
the other
caller tap
here
49
To set up a conference call:
1. Dial the first phone number and press
. When the caller
answers, dial a 2nd number and wait for it to be picked up.
2. When the 2nd caller answers, press
conference.
or
to set up the
•
Note: Conference calling can only be initiated from an outgoing call.
You cannot start one from an incoming call you received.
Making a Note
Regardless of whether you call from the Dialer, Contacts, Call History, or Speed Dial, you can take a note during a
call. After you have finished the note it will be saved as an attachment to your call in one of the Call History folders.
To make a note:
1.
2.
After you have entered a number and tapped
icon situated at the bottom of the screen.
or
, tap the
Use any of the input methods to record your note and then tap OK. You
can finish your note during or after the call.
50
To view a note:
1. Press the right side of the navigation pad or tap
. Tap and hold
the call, and then from the Pop-up menu tap view note.
2. Or, go to Notes, and then tap the name of the file from the list. (For more
information, see “Chapter 4, Notes”)
If you decide to create a contact for this caller – see Adding
and Transferring Contacts information” – the call and file
names will be amended to the name of the new contact; the file
will be unaffected.
C) Call Related Features
Checking Your Voice Mail
The first speed dial location defaults as your voice mailbox.
To retrieve your voice mail:
•
Press
, the left side of the navigation pad, select
Voice Mail ,
and then press
.
51
Adding and Transferring Contact Information
There are numerous methods for entering and storing contact information. Once saved on your device, these
contacts can be transferred between the programs used to make calls. Contacts can be stored in:
♦
Microsoft Contacts.
♦
Call History. New contact numbers can be found in the incoming or missed calls lists.
Microsoft Contacts: Adding and transferring contacts
1. To create a contact, see creating a contact in Chapter 4.
2. To transfer a contact to Speed Dial, tap and hold the contact and then
select Add Speed Dial Work Tel from the Pop-up menu.
3. In the next screen add the contact details, select a location then tap OK.
By default the Location function will give you the next
available position in the Speed Dial list. If you want to put a
number in a position that is already occupied, the new number
will replace that number already there.
To transfer a number to Speed Dial:
1.
Press
, either the left side of the navigation pad or Speed Dial, and
then New.
2.
3.
Find then tap the contact you want to add.
When the contact name and number appears in the screen – as left -
select an available location using the arrow keys.
By default, the Location function will give you the next available
position in the Speed Dial list. If you want to put a number in a
position that is already occupied, the new number will replace that
number already there.
52
Adding a record to Microsoft Contacts from Call History:
1. Press
, and then the right side of the navigation pad.
2.
Find the call details by first selecting the category it is filed under. For
example, if it is a missed call select Missed from the drop down menu
in the top-left corner.
3.
4.
5.
Select the contact to add then press and hold the navigation pad
center; in the pop-up menu that appears select Save to Contacts.
In the New Contact screen add additional contact details then press
the navigation pad center or tap OK.
The call details in the Call History will then be amended and displayed
under the name of the contact, not telephone number.
Managing Your Call History
The Call History details all incoming, outgoing, and missed calls and also provides a summary of total calls. The
Call History can also tell you when a call was initiated, how long it lasted, and provides easy access to any notes
taken during the call.
Tap here to select All
Calls, Missed,
Outgoing, Incoming or
By Caller
Name & Number
Duration of call
Time of call
To delete a call
53
Viewing call details
Tap in the top left corner of the screen and then select a category from the drop down menu.
Calls are categorized as below:
•
•
•
•
•
All Calls: All calls made to and from the phone in chronological order.
Missed: Calls that were not answered.
Outgoing: Calls made from the phone.
Incoming: Calls made to the phone.
By Caller: Categorizes calls alphabetically according to caller.
To delete all calls from Call History:
Tap Tools, and then Delete all Calls.
•
To set limits on the size of your Call History:
•
•
Tap Call History, Tools, Call Timers and then the box under Delete
call History items older than.
In the drop down menu choose a period of time and then tap OK.
54
D) Customizing Your Phone
You can personalize the setting of your phone, the services you have and the network you are connected to.
To select ring type and tone, and Keypad sounds:
1.
2.
In phone dialer, tap Tools, Options and then Phone.
Tap to see the drop-down menu choices below.
Ring type
Ring tone
Keypad
Downloading ring tones
You can make a connection to the Internet and then download ring tones that are compatible with the .WAV format.
Managing Ring Tone:
Add Ring Tone allows you to quickly find and display all the ring tones stored on your device, gives you the option to
listen, and then add or remove them from the Phone Settings list mentioned above.
Displaying all ring tones on your device:
Tap
, Settings, System and then Add Ring Tone – the program will
automatically list and display all the .wav files on your device.
55
Playing a ring tone:
•
After the ring tones have loaded, select one by tapping it, and then tap
play. If you don’t like the ring tone, deselect it.
Adding a ring tone to phone settings:
1. When the ring tones have loaded, you will see that some are already
selected; these ones are presently listed in phone settings.
2. To add or remove a ring tone from the list in phone settings, tap its name.
56
Enabling Voice Privacy:
Voice privacy is a method for encrypting voice calls to provide extra security.
To enable or disable this function:
1. In phone dialer, tap Tools, Options and then Services.
2. In Services, tap Voice Privacy, and then Get Settings (retrieving settings
may take a few minutes).
3. In the next screen, select either Enable or Disable, then tap OK.
57
To check voice privacy availability:
After you have enabled voice privacy you can choose to be notified if the
network doesn’t provide this service. To enable or disable this function:
1. In phone dialer, tap Tools, Options and then Phone.
2. In Phone, tap Notify me when voice privacy is unavailable.
•
Note: If voice privacy is unavailable you will be notified by an open
lock icon on the dialer.
Location Settings
With GPS you can decide if you want to allow your network to detect your geographic location. To do this:
1.
2.
In phone dialer, tap Tools, Options and then Services.
In Services, tap Location Setting and then Get Settings (retrieving
settings may take a few minutes).
3.
Then in Location Settings select On or Off.
58
Network System
With Network System you can choose to accept roaming (Standard) or restrict your phone to only calls from your
home network (Home only).
1.
2.
In phone dialer, tap Tools, Options and then Services.
In Services, tap Network System, then Get Settings (retrieving settings
may take a few minutes).
3.
Then in Preferred Serving System tap Home only or Standard.
TTY Mode
This mode allows the use of a TTY machine (for the hearing impaired) together with your device. Voice Carry Over
(VCO) allows a TTY user to switch between receiving TTY characters and talking into the phone; Hearing Carry Over
(HCO) allows a user to switch between transmitting TTY characters and picking up the phone to listen.
To view your TTY mode settings:
1.
2.
In phone dialer, tap Tools, Options and then Services.
In Services, tap TTY Mode, then Get Settings (retrieving settings may
take a few minutes).
3.
Tap Full mode, VCO, HCO or Off, then tap OK.
59
SMS Settings
SMS Settings stores the Callback Number for your device. The Callback Number is the number sent with an SMS to
signify who it is from – in most cases your number. If you need to change the Callback Number for any reason see
below.
1.
2.
In phone dialer, tap Tools, Options and then Services.
In Services, tap SMS Setting, then Get Settings (retrieving settings
may take a few minutes).
3.
Then enter a new number in the Callback Number box.
Automatic Answer
When activated, this feature automatically answers a call after a user-determined number of rings and transfers it to
the speakerphone or headset. If the headset is plugged in then it will go to headset, otherwise the speakerphone.
1. In phone dialer, tap Tools, Options and then More.
2. To activate, select the box next to Speakerphone/Headset then chose the
number of rings after which the device will pick up.
60
Button Lock
Button Lock enables you to lock the buttons on your device so that only the On/Off button will turn on your device.
Locking your device in this way ensures you can’t turn on the device by accident, and consume unnecessary power.
Enabling Key Lock when you are using your phone features will slow down your ability to
answer a call.
Enabling Button Lock:
1. Tap Phone, Tools, Options, and then More.
2. Under Hardware button Lock, select Lock all buttons except power button, and then OK.
E) Additional Dialing Information
Making an emergency call:
Enter the international emergency number 911 then
or press
.
1.
Your Pocket PC Phone also provides international emergency number
112. The number can normally be used to make an emergency call in
any country, if there is a mobile phone service network who supports it.
61
To change operators and keep your number:
If you are swapping from another carrier to Bell Mobility and would like to keep your number, you can do so with the
program Activation Wizard.
1. In phone dialer, tap Tools, Activation Wizard.
2. Follow the instructions in the next set of screens.
62
Chapter 5: Getting Connected
You can use your device to exchange information with other mobile devices as well as your PC, a network, or the
Internet. You have the following connection options:
•
•
Use the infrared (IR) port on your device to send and receive files between two devices.
Connect to your mobile Internet service provider (ISP). Once connected, you can send and receive e-mail
messages by using Inbox and view Web or WAP pages by using Microsoft Pocket Internet Explorer. The
communication software for creating a wireless ISP connection is already installed on your device. Your service
provider will provide software needed to install other services, such as paging and fax services.
•
•
Connect to the network at your company or organization where you work. Once connected, you can send and
receive e-mail messages by using Inbox, view Web or WAP pages by using Pocket Internet Explorer, and
synchronize with your PC.
Connect to the virtual private network (VPN) at the company or organization where you work. Once connected,
the added security of a VPN means that you can access the full resources of your company’s network. For
example, you can use File Explorer to access the files of computers on that network.
Connect to the Internet
You can use CDMA 1XRTT to connect to your mobile ISP, and use the connection to send and receive e-mail
messages, synchronize wirelessly, and view Web or WAP pages.
Starting a connection:
Once you have successfully inputted your operator’s connection settings into your device and your phone
is turned off flight mode, you can then access the Inbox or Internet, and these programs will start
automatically.
Once connected, you can:
•
Send and receive e-mail messages by using Inbox. Before you can use Inbox, you need to provide the
information it needs to communicate with the e-mail server. For specific instructions, see Connect Directly to an
E-mail Server later in this chapter.
•
•
Visit Web and WAP pages by using Pocket Internet Explorer.
Send and receive instant messages with MSN Messenger.
A pop-up screen will appear once you begin connecting, and leave when
the connection is complete.
To disconnect the Internet connection, press and hold the End
button,
, for at least 5 seconds.
63
Connect Directly to an E-mail Server
You can set up a connection to an e-mail server so that you can send and receive e-mail messages by using a modem
or network connection and Inbox on your device.
The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP
gateway.
You can use multiple e-mail services to receive your messages. For each e-mail service you intend to use, first set up
and name the e-mail service. If you use the same service to connect to different mailboxes, set up and name each
mailbox connection.
Setting up an e-mail service:
1. In Inbox on
your device,
tap
2. Fill you e-mail
address in the field,
then tap Next.
Accounts,
and then
New
Account.
Tapping Next will initiate auto-configuration – which attempts to connect your Pocket PC Phone to your
e-mail server and automatically download the necessary e-mail connection settings.
If auto-configuration is successful you can begin sending/receiving e-mails straight away.
If unsuccessful you will need to enter the settings manually (see screens 4/5 & 5/5).
64
3. Enter “Your
name,” your
“User name”
and
4. From the drop down
menu select the
“Service type” that
your e-mail provider
supports (POP3 or
IMAP4).
“Password”
then tap
Next.
5. Enter a “Name” for
your e-mail account
then tap Next.
6.
Enter your e-mail provider’s server name information for Incoming mail
and Outgoing mail, then tap Finish. For an explanation of a screen, tap
and then Help. When finished, to connect to your e-mail server, tap
Accounts and then Connect.
Get Help Connecting
More information on creating a connection to work or the Internet, as well as information on additional procedures,
can be found in the following locations:
•
•
•
Inbox: Sending and Receiving E-mail Messages or short messages in Chapter 6.
Online Help on the device. Tap
then Help. Tap View, All Installed Help, then Inbox or Connections.
ActiveSync Help on the desktop computer. In ActiveSync, click Microsoft ActiveSync Help on the Help menu.
For troubleshooting information, see the Pocket PC Web site at: http://www.microsoft.com/mobile/pocketpc
65
Chapter 6: Wireless Data Programs
As well as wireless voice communication your device has built in support for a range of wireless data communication
forms:
1.
2.
3.
4.
5.
Browse the Web and view WAP-enabled sites.
Send SMS.
Send and receive e-mail.
Remotely synchronize with your PC.
Send and receive information from another IR-compatible Windows-powered device.
Except in the case of No.5, in order to use these features the following steps must have been completed:
1. Your mobile phone service provider supports data transmission (for further information contact your mobile
phone service provider).
2. You have an account for Web and e-mail access with an ISP or at a network through your company or another
organization. (It may be that your mobile phone service provider is acting as your ISP).
3. You have set up a dial up connection to an ISP or network on your Pocket PC Phone.
4. Your wireless connection to your mobile service provider is turned on but you are not using it.
5. You have switched on one of the dial up networking connections established in 4 above.
Pocket Internet Explorer: Browsing Web and WAP pages
Use Microsoft Pocket Internet Explorer to view Web HTML, cHTML and WAP pages. You can browse in either of
these ways:
•
•
During synchronization with your PC, download your favorite links and mobile favorites that are stored in the
Mobile Favorites folder in Internet Explorer on the PC.
Connect to an Internet service provider (ISP) or network and browse the Web. To do this, you’ll need to create
the connection first, as described in the separate Settings Guide.
When connected to an ISP or network, you can also download files and programs from the Internet or intranet.
66
Using Pocket Internet Explorer
Switching to Pocket Internet Explorer:
Tap then Internet Explorer.
•
You can use Pocket Internet Explorer to browse mobile
favorites and channels that have been downloaded to your
device without connecting to the Internet. You can also
connect to the Internet through an ISP or a network
connection and browse the Web/ WAP page(s).
The web page of your operator should
appear in the blank space in the picture to
the left.
To view mobile favorites and channels:
1. Tap
, then Internet Explorer.
2. To display your list of favorites, tap the
Favorites button
3. Tap the page you want to view.
4. You’ll see the page that was downloaded the
last time you synchronized with your PC. If the
page is not on your device, the favorite will be
dimmed. You will need to synchronize with your
PC again to download the page to your device,
or connect to the Internet to view the page.
Browsing the Internet:
1. Set up a connection to your ISP or corporate network using Connections, as described in the separate Settings
Guide.
2. To connect and start browsing, do one of the following:
•
•
Tap the Favorites button, and then tap the favorite you want to view.
Tap View then Address Bar. In the address bar that appears at the top of the screen, enter the Web address
you want to visit and then tap Go. Tap the arrow to choose from previously entered addresses.
To add a favorite link, tap and hold on the page then tap Add to Favorites
in the pop-up menu.
67
The Mobile Favorites Folder
Only items stored in the Mobile Favorites folder in the Favorites folder in Internet Explorer on your PC will be
synchronized with your device. This folder was created automatically when you installed ActiveSync.
Favorite Links
During synchronization, the list of favorite links in the Mobile Favorites folder on your PC is synchronized with Pocket
Internet Explorer on your device. Both the PC and your device are updated with changes made to either list each time
you synchronize. Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your
device, and you will need to connect to your ISP or network to view the content. For more information on
synchronization, see ActiveSync Help on the PC.
Mobile Favorites
If you are using Microsoft Internet Explorer 5.0 or later on your PC, you can download mobile favorites to your device.
Synchronizing mobile favorites downloads Web content to your device so that you can view pages while you are
disconnected from your ISP and PC.
Use the Internet Explorer plug in installed with ActiveSync to quickly create mobile favorites.
To create a mobile favorite:
1. In Internet Explorer on your desktop computer, click Tools and then Create Mobile Favorite.
2. To change the link name, enter a new name in the Name box.
3. Optionally, in Update, select a desired update schedule.
4. Click OK. Internet Explorer downloads the latest version of the page to your desktop computer.
5. Limit the number of downloaded linked pages. In Internet Explorer on the desktop computer, click Favorites; then
move your mouse through Mobile Favorites to the mobile favorite you want to change. Finally, right-click the
mobile favorite and then Properties; in the Download tab, specify 0 or 1 for the number of linked pages you want
to download.
6. Synchronize your device and desktop computer. Mobile favorites that are stored in the Mobile Favorites folder in
Internet Explorer are downloaded to your device.
If a scheduled update was not specified in step 3, content will have to be manually
downloaded to update both computers. To see the last time content was downloaded to
the computer, click Tools then Synchronize from the Internet Explorer window. Manually
download content as needed.
To add a button to your computer’s Internet Explorer toolbar for creating mobile favorites,
click View, Toolbars then Customize.
68
Saving Device Memory
Mobile favorites take up storage memory on your device. To minimize the amount of memory used:
•
In ActiveSync on your desktop, click Options, select Favorites/Internet Explorer, tap Settings and then
Customize. You can then deselect Synchronize Images, Synchronize Sound and/or Synchronize offline
content pages, to stop pictures and sounds, or some mobile favorites from being downloaded to the device. For
more information, see ActiveSync Help.
•
Limit the number of downloaded linked pages. In Internet Explorer on the desktop computer, click Favorites; then
move your mouse through Mobile Favorites to the mobile favorite you want to change. Finally, right-click the
mobile favorite and then Properties. In the Download tab, specify 0 or 1 for the number of linked pages you want
to download.
To browse the Internet:
1. Set up a connection to your ISP or corporate network using Connections, as described in the separate Settings
Guide.
2. To connect and start browsing, do one of the following:
•
•
Tap the Favorites button, and then tap the favorite you want to view.
Tap View and then Address Bar. In the address bar that appears at the top of the screen, enter the Web
address you want to visit and then tap Go. Tap the arrow to choose from previously entered addresses.
To add a favorite link, tap and hold on the page and tap Add to
Favorites in the pop-up menu.
Using AvantGo Channels
AvantGo, a free interactive service that provides access to personalized content and popular websites, can
be subscribed to directly from your device. Content can be downloaded when you synchronize your device
and computer, or directly from the Internet. Visit the AvantGo website for more information.
To sign up for AvantGo:
1. In ActiveSync options on the desktop computer, turn on synchronization for the AvantGo information type.
2. In Pocket Internet Explorer on your device, tap the Favorites button to display your list of favorites.
3. Tap the AvantGo Channels link.
4. Follow the directions on the screen.
You will need to synchronize your device with your desktop computer and then tap the My Channels button to
complete the AvantGo setup. When synchronization is complete, tap the AvantGo Channels link in your list of
favorites to see a few of the most popular channels. To add or remove channels, tap the Add or Remove link.
69
MSN Messenger: Instant Messaging
MSN Messenger on your mobile device is an instant messaging program that lets you:
•
See who is online.
•
•
Send and receive instant messages.
Have instant message conversations with groups of contacts.
To use MSN Messenger, you must have a Microsoft Passport™ account or a Microsoft Exchange e-mail account. You
must have a Passport to use MSN Messenger Service. If you have a Hotmail or MSN account, you already have a
Passport. Once you have obtained either a Microsoft Passport or a Microsoft Exchange account, you are ready to set
up your account.
Sign up for a Microsoft Passport account at
http://www.passport.com. Get a free Microsoft Hotmail e-mail
address at http://www.hotmail.com.
To switch to MSN Messenger:
Tap
, Programs, and then tap MSN Messenger.
Setting Up
Before you can connect, you must enter your Passport or Exchange account information.
Setting up an account and sign in:
1.
2.
In the Tools menu, tap Options.
In the Accounts tab, enter your Passport or Exchange account
information.
3.
To sign in, tap the sign in screen and enter your e-mail address and
password.
To change from your Exchange account to your Passport
account, and sign in:
1.
In the Tools menu, tap Options.
2.
In the Accounts tab, check Enable Passport account, enter your
Passport account information, under Sign in using this account
first check Passport account, and then tap OK.
To sign in, tap the sign-in screen and enter your e-mail address and
password.
3.
If you use MSN® Messenger on your computer, your contacts will automatically show up
on your device.
70
Working with Contacts
•
The MSN Messenger window shows all of your
messenger contacts at a glance, divided into
Online and Not Online categories. From this
view, while connected, you can chat, send
e-mail, block the contact from chatting with you,
or delete contacts from your list using the Pop-up
menu.
To see others online without being seen, in the Tools menu, tap My Status and select
Appear Offline. If you block a contact, you will appear offline but will remain on the
blocked contact’s list. To unblock a contact, tap and hold the contact, then tap Unblock on
the Pop-up menu.
Chatting with Contacts
•
Tap a contact name to open a chat window. Enter
your message in the text entry area at the bottom
of the screen, or tap My Text to enter a preset
message, then tap Send. To invite another contact
to a multi user chat, in the Tools menu, tap Invite
and tap the contact you want to invite.
To switch back to the main window without closing a chat, tap the Contacts button. To
revert back to your chat window, tap Chats and select the person with whom you were
chatting.
71
•
•
To determine if the contact you are chatting with is
responding, look for the message under the text
entry area.
For more information on using MSN Messenger,
tap
and then Help.
Inbox: Sending and Receiving E-mail or SMS
Use Inbox to send and receive e-mail messages in either of these ways:
•
•
Synchronize e-mail messages with Microsoft Exchange or Microsoft Outlook on your PC.
Send and receive e-mail messages by connecting directly to an e-mail server through an Internet service provider
(ISP) or a network.
You also can use Inbox to send and receive SMS and Unstructured Supplementary Service Data (USSD).
Synchronizing E-mail Messages
E-mail messages can be synchronized as part of the general synchronization process. You will need to enable Inbox
synchronization in ActiveSync. For information on enabling Inbox synchronization, see ActiveSync Help on the PC.
During synchronization:
•
Messages are copied from the mail folders of Exchange or Outlook on your PC to the ActiveSync folder in Inbox
on your device. By default, you will receive messages from the past five days only, the first 100 lines of each
message.
•
•
E-mail messages in the Outbox folder on your device are transferred to Exchange or Outlook, and then sent from
those programs.
E-mail messages in subfolders must be selected in ActiveSync on your PC in order to be transferred.
Connecting Directly to an E-mail Server
In addition to synchronizing e-mail messages with your PC, you can send and receive e-mail messages by
connecting to an e-mail server using a modem or network card connected to your device. You’ll need to set up a
remote connection to a network or an ISP, and a connection to your e-mail server.
When you connect to the e-mail server:
•
•
•
New messages are downloaded to the device Inbox folder
Messages in the device Outbox folder are sent
Deleted messages are removed from the device Inbox folder.
72
Messages that you receive directly from an e-mail server are linked to your e-mail server rather than your PC. When
you delete a message on your device, it is also deleted from the e-mail server the next time you connect based on the
settings you selected in ActiveSync.
When working online connected to your server, you can immediately read and respond to messages - they are sent
as soon as you tap Send, saving space on your device.
To work offline, download new message headers or partial messages, and disconnect from the server. You can then
mark which messages to completely download the next time you connect.
Using the Message List
•
Received messages are displayed in the message
list. By default, the most recently received
messages are displayed first in the list.
•
When you receive a message, tap it to open it.
Unread messages are displayed in bold.
When you connect to your e-mail server or synchronize with your PC, by default, you’ll receive messages from the
last five days only, the first 100 lines of each new message. The original messages remain on the e-mail server or
your PC.
73
To retrieve a full message during your next synchronization or e-mail server connection, tap and hold the message.
On the pop-up menu, tap Mark for Download.
When memory is full, a warning message will pop up indicating "Storage memory is critically low. If you don't
increase storage memory, you may not able to start some programs. ......" In this situation free memory space
(for more information see the sections on managing and clearing memory and removing programs).
Specify downloading preferences when you set up the service or select your synchronization options.
Inbox synchronization options can be changed using ActiveSync® options. See ActiveSync® Help for more
information.
To change options for e-mail server connections, tap Tools then Options. On the Service tab, tap the service
you want to change. To remove a service, tap and hold the service and select Delete.
Creating an SMS or E-mail:
1. Tap New.
2. In the To field, enter either e-mail address or SMS
number of one or more recipients, separating them
with a semicolon, or select a name from the contact
list by tapping the Address Book button. All e-mail
addresses entered in the e-mail fields in Contacts
appear in the Address Book.
3. Compose your message. To enter preset or
frequently used messages, tap My Text and select a
message.
4. Tap Send when you’ve finished the message. If you
are working offline, a pop-up message will appear
asking you if you want to connect.
•
Whether you want to send or read E-mail or a
SMS, you can swap it by tapping Services then
choose what service you want.
•
If you are sending an SMS message and want to
know if it was received, before sending the
message, tap Edit, Options, and select
Request SMS text message delivery
notification.
Managing Messages and Folders
Messages are displayed in one of five folders: Inbox, Deleted Items, Drafts, Outbox and Sent Items. The Deleted
Items folder contains messages that have been deleted on the device. The behavior of the Deleted and Sent Items
folders depends on the options you have chosen. In the message list, tap Tools then Options. On the Message tab,
select your options.
To create new folders, tap Tools then Manage Folders. For all service except ActiveSync®, you can access folder
options by tapping Tools then Manage Folders. To move a message to another folder, tap and hold the message and
then tap Move to on the pop-up menu.
74
Folder behavior with a direct connection to an e-mail server
The behavior of the folders you create depends on whether you are using ActiveSync, SMS, POP3, or IMAP4.
1. If you use ActiveSync, e-mail messages in the Inbox folder in Outlook will automatically be synchronized with
your device. You can select to synchronize additional folders by designating them for ActiveSync. The folders you
created and the messages you moved will then be mirrored on the server. For example, if you move two
messages from the Inbox folder to a folder named ‘Family’, and you have designated ‘Family’ for synchronization,
the server creates a copy of the ‘Family’ folder and copies the messages into that folder. You can then read the
messages while away from your PC.
2. If you use SMS, messages are stored in the Inbox folder of the SMS category.
3. If you use POP3 and you move e-mail messages to a folder you created, the link is broken between the
messages on the device and their copies on the mail server. The next time you connect, the mail server will see
that the messages are missing from the device Inbox and delete them from the server. This prevents you from
having duplicate copies of a message, but it also means that you will no longer have access to messages that you
move to folders created from anywhere except the device.
4. If you use IMAP4, the folders you created and the e-mail messages you moved are mirrored on the server.
Therefore, messages are available to you anytime you connect to your mail server, whether it is from your device
or PC. This synchronization of folders occurs whenever you connect to your mail server; create new folders, or
rename/delete folders when connected.
Transferring Items Using Infrared
Using infrared (IR), you can send and receive information, such as contacts and appointments, between two devices.
Sending information:
1. Switch to the program where you created the item you want to send and locate the item in the list.
2. Align the IR ports so that they are unobstructed and within a close range.
3. Tap and hold the item, and tap Beam Item on the Pop-up menu.
You can also send items, but not folders, from File Explorer. Tap and hold
the item you want to send, and then tap Beam File on the Pop-up menu.
Receiving information:
1. Align the IR ports so that they are unobstructed and within a close range.
2. Have the owner of the other device send the information to you. Your device will automatically receive it.
Terminal Services Client
Using the Terminal Services Client, you can log onto a Windows NT server type PC that is running Terminal
Services software and use all of the programs that are available on that PC from your mobile device. For example,
instead of running Microsoft Pocket Word, you can run the PC version of Microsoft Word and access all of the .doc
files on that PC from your device.
You cannot use Transcriber when entering information in Terminal
Services. You must use Keyboard, Block Recognizer, or Letter
Recognizer.
75
Connecting to A Terminal Server:
Start a remote connection to the server via your wireless modem connection.
1.
2.
3.
Tap
, Programs, and then Terminal Services Client.
To connect to a server you have previously connected to, tap a server listed under Recent Servers.
To connect to a new server, enter the server’s name in the Server box. Select the limit size of desktop to fit
check box only when using applications that have been specifically sized for use with Pocket PC.
4.
Tap Connect.
If the network administrator has configured Terminal Services Client to
reconnect to disconnected sessions, and you previously disconnected
from a Terminal Server without ending the session, the Terminal Services
Client reconnects to that session.
Disconnecting without ending a session:
The following commands must be accessed from the Start menu in the Terminal Services window used to access the
PC’s commands. Do not use the Start menu on your mobile device.
1.
2.
In the Terminal Services Client window, tap
, and then Shutdown.
Tap Disconnect.
If the network administrator has configured Terminal Services Client to
reconnect to disconnected sessions, you will be reconnected to this session
the next time you connect to this server.
Disconnecting and end a session:
1.
2.
In the Terminal Services Client window, tap
then Shutdown.
Tap Log Off.
Navigating within Terminal Services Client:
Once connected to the server, the PC’s screen may more than fill your mobile device’s screen. If scroll bars are
displayed on the server’s screen, you will see more than one set of scroll bars on your mobile device:
•
•
•
One to scroll information on the PC, and one to scroll the PC display through the Terminal Services window in
Terminal Services Client.
To ensure you are scrolling the PC display through Terminal Services Client, use the four directional buttons
at the bottom of the Terminal Services Client screen.
To better-fit information on your mobile device’s screen, select Limit size of server desktop to fit. For best
results, programs on the PC should be maximized.
76
Tips and Tricks
Improving display performance:
Display performance is improved by decreasing the time it takes for the screen to be refreshed on the PC.
1.
2.
3.
On your PC, select
Click Display.
Clear the Transition effects for menus and tool tips check box.
, Settings and Control Panel.
Improving browser performance:
Performance with Internet Explorer on the PC is improved by decreasing the time it takes for Web pages to be
refreshed.
In Internet Explorer on your PC, select Tools, Internet Options, Advanced, and then clear the Use smooth
scrolling check box.
Wireless Modem
This utility lets your device act as a wireless modem, allowing your PC/Notebook to be wirelessly connected to a
network.
Before you press the “Start” button, please make sure you have connected this device to your PC/Notebook by Serial
or IrDA connection and disabled ActiveSync.
For Your PC
Creating a new modem:
1. Add a new modem from Start, Settings, Control Panel, Phone And Modem Options, Modems tab, and then
Add...
2. Check the box for "don't detect my modem; I will select it from a list.” Click "Next.”.
3. Select [Standard Modem Types], and choose standard models. ex: Standard 19200 bps Modem.
4. Select the COM port you are going to use.
5. Click "Next", "Finished".
6. Once the modem has been setup, highlight the newly created Modem link and choose Properties.
7. Click "Modem", Make sure the Maximum Port Speed is set at 115200. Click "OK".
Creating a new dial-up connection (for 2000):
1. Make a new connection from Start, Settings, Control Panel, Network and Dial-up Connections
2. Choose "Dial-up to the Internet" for Network Connection Type, then click "Next"
3. Click the radio buttons for " I want to set up my Internet connection manually, or.....". Click Next.
4. Choose "I connect through a phone line and a modem" for the way to connect to the Internet. Click Next.
5. Select the Modem just created. Click Next.
6. Uncheck the box for "Use area code and dialing rules".
7. Enter #777 for telephone number, then click Next
8. Enter your user ID and password for the ISP account. Click Next.
9. Enter your ISP Name. Click Next.
10. Select "No" for setup e-mail account. Click Next... to finish the setting.
11. Right click the dial-up connection you just created and choose Properties.
12. Ensure that the correct modem is chosen, and #777 is entered for phone number.
Note: Ensure that the serial com port for ActiveSync is disabled on the laptop side.
77
On Pocket PC side
Creating a connection:
1. Tap Start, Programs and Wireless Modem
2. Connect the device with laptop via serial cable.
3. Tap "Start" on the device.
4. Invoke the dial-up connection on laptop, enter user
name and password, and then click " Dial".
5.
Once it is connected, you should be able to see the
computer icon on the taskbar of the laptop
78
Chapter 7 : Microsoft ActiveSync
Using Microsoft ActiveSync, you can synchronize the information on your PC with the information on your device.
Synchronization compares the data on your device with your PC and updates both with the most recent information.
For example:
•
•
Keep Pocket Outlook data up-to-date by synchronizing your device with Microsoft Outlook data on your PC.
Synchronize Microsoft Word and Microsoft Excel files between your device and PC. Your files are automatically
converted to the correct format
By default, ActiveSync does not automatically synchronize all types of
information. Use ActiveSync options to turn synchronization on and off
for specific information types.
With ActiveSync, you can also:
•
•
•
Back up and restore your device data.
Copy (rather than synchronize) files between your device and PC.
Control when synchronization occurs by selecting a synchronization mode. For example, you can synchronize
continually while connected to your PC or only when you choose the synchronize command.
Select which information types are synchronized and control how much data is synchronized. For example, you
can choose how many weeks of past appointments you want synchronized.
•
After installation is complete, the ActiveSync® Setup Wizard will:
1. Help connect your device to your computer.
2. Set up a partnership to synchronize information between the two devices.
3. Customize the synchronization settings.
Synchronization automatically begins when you finish using the Wizard. After this initial synchronization, view your
device’s Calendar, Contacts and Tasks. Everything stored in Microsoft® Outlook® on your computer should now be
on your device. Disconnect the device from your computer and you’re ready to go.
To initiate ActiveSync® on your device, tap
synchronize remotely from your device
, then ActiveSync. Note that if you have a wireless LAN card, you can
For information about using ActiveSync® on your computer, see ActiveSync® Help in the ActiveSync® program.
79
•
For more information about ActiveSync on your
device, switch to ActiveSync, tap
tap Help.
, and then
Synchronizing Files
When you first setup a connection (or by tapping Options in ActiveSync on your desktop) you can see under Mobile
Device the list of programs you can synchronize. It includes: Calendar, Contacts, Tasks, Inbox, Files, Pocket
Access, Favorites and AvantGo channels. Files is a folder specially-created on your desktop in My Documents
into which you must place all the files - Word, Excel etc - you wish to synchronize.
Synchronizing files:
1. To create a new folder, select Files in ActiveSync, then OK.
2. Use Windows Explorer on your desktop to find this folder – usually called My Documents pre-fixed by the name
you gave to your connection – then copy files you want to synchronize into this folder.
3. Tap Synchronize in ActiveSync.
For more information about ActiveSync on your device, switch to ActiveSync, tap
, and then tap Help.
80
Chapter 8: Microsoft Pocket Outlook
Microsoft® Pocket Outlook® includes Calendars, Contacts, Tasks, Inbox and Notes which can be used individually or
together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Inbox.
ActiveSync® synchronizes information in Microsoft® Outlook® or Microsoft® Exchange on your computer with your
device, comparing changes made on both and updating each of them with the latest information. For information on
using ActiveSync®, see ActiveSync® Help on the computer.
You can switch to any of these programs by tapping them on the
menu.
Calendar: Scheduling Appointments and Meetings
•
Use Calendar to schedule appointments,
including meetings and other events. You can
check your appointments in one of several
views (Agenda, Day, Week, Month, and Year)
and easily switch views by using the View
menu.
To customize the Calendar display tap Options on the Tools menu.
Creating an appointment:
1. If you are in Day or Week view, tap the desired date
and time for the appointment.
2. Tap New.
3. Tap a field then enter a description and a location.
4. Adjust date and time as needed.
5. Enter other desired information. Hide the input panel to
see all available fields.
6. To add notes, tap the Notes tab. You can enter text,
draw, or create a recording. For more information on
creating notes, see Notes: Capturing Thoughts and
Ideas later in this chapter.
7. When finished, tap OK to return to the calendar.
If you select Remind me in an appointment, your device will remind you according to
the options set in
, Settings, Personal tab, Sounds & Reminders.
81
Using the Summary Screen:
•
Tap an appointment to display the summary screen. To
make changed, tap Edit.
Creating Meeting Requests:
Calendar can set up meetings with Outlook or Pocket Outlook users. The meeting request will be created
automatically and sent either when you synchronize Inbox or when you connect to your e-mail server. Indicate how
you want meeting requests sent by tapping Tools and then Options. If you send and receive e-mail messages
through ActiveSync, select ActiveSync.
To schedule a meeting:
1. Create an appointment.
2. In the appointment details, hide the input panel, and
then tap Attendees.
3. From the list of e-mail addresses you’ve entered in
Contacts, select the meeting attendees. Tap OK.
The meeting notice is created automatically and placed in
the Outbox folder.
For more information on sending and receiving meeting
requests, see Calendar Help and Inbox Help on the device.
82
Contacts: Tracking Friends and Colleagues
•
Contacts maintains an easily accessible list of
friends and colleagues. The device’s infrared
(IR) port allows you to quickly share Contacts
information with other device users. To
access Contacts, tap
then Contacts.
You can also press the Contacts Program
button on the front of the device.
•
•
To change the way information is displayed in
the list, tap Tools and then Options.
All phone numbers stored in Contacts can be
accessed from the Phone Book to place a
call.
•
When transferring the contact to another
device by using infrared (IR), tap and hold
that contact, then tap the Beam Contact from
the displayed pop-up menu. For more
information, See “Transferring Items Using
Infrared.”
Creating a contact:
1. Tap New.
2. Using the input panel, enter a name and other
contact information. Scroll down to see all
available fields.
3. Tap Categories to assign the contact to a
category. In the list, Contacts can be displayed by
category.
4. Tap the Notes tab to add notes or a drawing, or to
create a recording. For more information, see
“Notes: Capturing Thoughts and Ideas” later in this
chapter.
5. To finish and return to the contact list, tap OK.
83
Finding a contact:
There are 6 ways to find a contact:
1. Press and hold the upside of the navigation pad
until alphabetical letters appear on the screen in
large type. Then use the navigation pad to scroll
through the alphabet and select a letter.
2. Tap one of the grouping of letters displayed across
the top of the screen.
3. Enter a name in the box under the navigation bar.
To view all contacts, clear text from the box or tap
the button to the right of the box.
4. In the contact list, tap the category list (labeled All
Contacts by default) and select the type of contact
that you want displayed. To show all contacts
again, select All Contacts. To view a contact not
assigned to a category, select None.
5. To view contacts by their company names, tap
View then By Company. The number of contacts
working for that company will be displayed to the
right of the company name.
6. Tap
, Find, enter the contact name, select
Contacts for the type, and then tap Go.
Using the Summary Screen:
•
Tap a contact to display the summary screen. To
make changes, tap Edit.
84
Tasks: Keeping a To Do List
•
Tasks keeps track of what has to be done. To
access, tap then Tasks.
Select the sort
order of the list
Tap an item to
display or edit the
task details. Tap
and hold the item to
display a pop-up
menu of actions
To change the way information is displayed in the list, tap Tools and then Options.
Creating a task:
Tap to choose
from predefined
subjects
1. Tap New.
2. Enter a description.
3. Enter a start date and due date or enter other
information by first tapping the field. Hide the
input panel to see all available fields.
4. To assign the task to a category, tap
Categories and select a category from the list.
In the task list, you can display tasks by
category.
5. To add notes, tap the Notes tab. You can enter
text, draw, or create a recording. For more
information on creating notes, see Notes:
Capturing Thoughts and Ideas later in this
chapter.
6. Tap OK when finished.
To quickly create a task with only a subject, tap Entry Bar on the Tools
menu. Then, tap Tap here to add a new task and enter your task
information.
85
Using the Summary Screen:
•
Tap a task to display the summary screen. To
make changes, tap Edit.
Notes: Capturing Thoughts and Ideas
•
Notes quickly capture thoughts, reminders, ideas,
drawings, and phone numbers. You can create a
written note or a recording and include a recording
in a note. If a note is open when you create the
recording, it will be included in the note as an icon.
If the note list is displayed, it will be created as a
stand-alone recording.
86
Chapter 9: Companion Programs
Companion programs include Microsoft Pocket Word, Microsoft Pocket Excel, Microsoft Money, and Windows
Media™ Player for Pocket PC, and Microsoft Reader.
To switch to a companion program on your device, tap Programs on the
menu, and then tap the program name.
Pocket Word
Pocket Word works with Microsoft Word on your PC, providing easy access to copies of your documents. You can
create new documents on your device, or you can copy documents from your PC to your device. Synchronize
documents between your PC and your device so that you have the most up-to-date content in both locations.
Use Pocket Word to create documents, such as letters, meeting minutes, and trip reports. To create a new file, tap
, Programs, Pocket Word, and then New. A blank document appears. Or, if you’ve selected a template for new
documents in the Options dialog box, that template appears with appropriate text and formatting already provided.
You can open only one document at a time; when you open a second document, you’ll be asked to save the first. You
can save a document you create or edit in a variety of formats, including Word (.doc), Pocket Word (.psw), Rich Text
Format (.rtf), and Plain Text (.txt).
Pocket Word contains a list of the files stored on your device. Tap a file to open it and tap and hold to delete, make
copies of, and send files from the Pop-up menu.
You can change the zoom magnification by tapping View and then Zoom.
Then select the percentage you want. Select a higher percentage to enter
text and a lower one to see more of your document.
If you’re opening a Word document created on a PC, select Wrap to Window
on the View menu so that you can see the entire document.
You can enter information in Pocket Word in one of four modes (typing, writing, drawing, and recording), which are
displayed on the View menu. Each mode has its own toolbar, which you can show and hide by tapping the
Show/Hide Toolbar button on the command bar.
88
Utilizing typing mode:
•
•
Using the input panel, enter typed text into
the document. For more information on
entering typed text, see Chapter 3.
To format and edit text, first highlight it by
using your stylus to drag through the text you
want to select. You can search a document to
find text by tapping Edit then Find/ Replace.
Utilizing writing mode:
•
In writing mode, use your stylus to write
directly on the screen. Ruled lines are
displayed as a guide, and the zoom
magnification is greater than in typing mode
to allow you to write more easily. For more
information on writing and selecting writing,
see Chapter 3.
If you cross three ruled lines in a single stylus stroke, the writing becomes
a drawing, and can be edited and manipulated as described in the
following section.
Written words are converted to graphics (metafiles) when a Pocket Word
document is converted to a Word document on your PC.
89
Utilizing drawing mode:
•
In drawing mode, use your stylus to
draw on the screen. Gridlines appear as
a guide. When you lift your stylus off the
screen after the first stroke, you’ll see a
drawing box indicating the boundaries of
the drawing. Every subsequent stroke
within or touching the drawing box
becomes part of the drawing. For more
information on drawing and selecting
drawings, see Chapter 3.
Utilizing recording mode:
In recording mode, you can embed a recording into your document. Recordings are saved as .wav files. For more
information on recording, see “Making a Recording” in Chapter 1.
For more information on using Pocket Word, tap
and then Help.
Pocket Excel
Pocket Excel works with Microsoft Excel on your PC to provide easy access to copies of your workbooks. You can
create new workbooks on your device, or you can copy workbooks from your PC to your device. Synchronize
workbooks between your PC and your device so that you have the most up-to-date content in both locations.
Use Pocket Excel to create workbooks, such as expense reports and mileage logs. To create a new file, tap
,
Programs, Pocket Excel, and then New. You can also tap New, then Excel Workbook from the Today screen.
90
A blank workbook appears. Or, if you’ve selected a template for new workbooks in the Options dialog box, that
template appears with appropriate text and formatting already provided. You can open only one workbook at a time;
when you open a second workbook, you’ll be asked to save the first. You can save a workbook you create or edit in a
variety of formats, including Pocket Excel (.pxl) and Excel (.xls).
Pocket Excel contains a list of the files stored on your device. Tap a file to open it, and tap and hold to delete, make
copies of, and send files from the Pop-up menu.
Pocket Excel provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering. To display
the toolbar, tap View and then Toolbar.
If your workbook contains sensitive information, you can protect it with a password. To do
so, open the workbook; tap Edit, and then Password. Every time you open the workbook,
you will need to enter the password, so choose one that is easy for you to remember but
hard for others to guess.
Tips for Working in Pocket Excel
Note the following when working in large worksheets in Pocket Excel:
•
View in full screen mode to see as much of your worksheet as possible. Tap View and then Full Screen. To exit
full screen mode, tap Restore.
•
•
Show and hide window elements. Tap View and then tap the elements you want to show or hide.
Freeze panes on a worksheet. First select the cell where you want to freeze panes. Tap View and then Freeze
Panes. You might want to freeze the top and leftmost panes in a worksheet to keep row and column labels visible
as you scroll through a sheet.
•
•
Split panes to view different areas of a large worksheet. Tap View and then Split. Then drag the split bar to where
you want it. To remove the split, tap View and then Remove Split.
Show and hide rows and columns. To hide a hidden row or column, select a cell in the row or column you want to
hide. Then tap Format, then Row or Column, and then Hide. To show a hidden row or column, tap Tools, then
Go To, and then type a reference that are in the hidden row or column. Then tap Format, then Row or Column,
and then Unhide.
Windows Media Player for Pocket PC
Use Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your device
or on a network. To switch to Windows Media Player for Pocket PC, tap
, then Windows Media.
91
•
•
Use Microsoft Windows Media Player on your PC
to copy digital audio and video files to your Pocket
PC. You can play Windows Media and MP3 files
on your Pocket PC.
Windows Media™ player can be used even if the
screen is turned off. Tap Tools, Settings then
Buttons, and select Screen Toggle from the
pull-down list beside “Select Function”, then press
the program button you wish to allocate. By
pressing the allocated button, you can turn on and
of the screen.
•
For more information about using Windows Media
Player for Pocket PC, tap
, and then tap
Help.
Microsoft Reader
Use Microsoft Reader to read e-Books on your device. Download books to your PC from your favorite e-Book Web
site. Then, use ActiveSync to copy the book files to your activated device. The books appear in the MS-Reader
Library, where you can open them by tapping a title the list. Each book consists of a cover page, an optional table of
contents, and the pages of the book. You can:
•
•
Page through the book by using the Up/Down control on your
device or by tapping the page number on each page.
Annotate the book with highlighting, bookmarks, notes, and
drawings.
•
•
Search for text and look up definitions for words.
The Guide-book contains all the information you'll need to use the
software. To open the Guide-book, tap Help on the Reader
command bar. Or, on a book page, tap and hold on the book title,
and then tap Help on the Pop-up menu.
•
To switch to Microsoft Reader, tap
Microsoft Reader.
, Programs, and then
Getting Books on Your Device
You can purchase and download book files from the Web to your PC and then synchronize them with your Pocket PC;
however, in order to do so, you must have: activated your device – you only need to activate it once -, have an
activated copy of MS Reader on your PC, and have set up synchronization for Files in ActiveSync.
1.
Open ActiveSync on your PC then check you have selected synchronize Files - if you have done so it will
appear under Information Type; if you have not click Options, Sync options, check Files and then OK from
the pop-up menu. (The pop-up menu is telling you our computer will create a folder in which you must put files
you wish to synchronize)
2.
If you have not already activated your device, open a web browser, go to http://das.Microsoft.com/activate
92
and follow the instructions.
3.
4.
If you do not have a copy of MS-Reader on your PC, go to one of the retailers listed above and download a
free copy from their site; then activate it as described above.
5.
6.
Go to one of the Microsoft Reader e-Book sites, and follow the instructions in the site for choosing,
purchasing and downloading a book to your desktop.
Use Windows Explorer on your desktop to locate the MS Reader “My Library” folder and the “Pocket_PC My
Documents” folder, find the book title in My Library and then copy it to Pocket_PC My Documents.
ActiveSync will then download the files from your PC to your activated device.
Sample books and a dictionary are also included in the MS-Reader folder in the Extras folder on the Pocket PC
Companion CD.
Using the Library
The Library is your Reader home page; it displays a list of all books stored on your device or storage card.
Opening the Library:
•
•
On the Reader command bar, tap Library.
On a book page, tap the book title, and then
tap Library on the Pop-up menu.
Opening a book:
•
Tap its title in the Library list.
Reading a Book
•
Each book consists of a cover page, an
optional table of contents, and the pages of
the book.
•
•
Navigation options are listed in the bottom
portion of the cover page.
The first time you open a book, you’ll
probably want to go to the first page or to the
table of contents, if there is one.
Subsequently, whenever you open the book,
you’ll be automatically taken to the last page
read.
•
•
In addition to the text, each book page
includes a page number and book title.
You can also page through a book by using
the Up/ Down control on your device.
93
Using Reader Features
Reading a book electronically gives you several options not available with paper books. These options are available
from any book page.
Select text by dragging across the text on the page. Then, tap an option on the Pop-up menu, as described here:
•
•
•
Search for Text. Find text in a book by tapping Find on the Pop-up menu. Enter the word you want to search for,
and tap the desired Find option. Reader highlights found text on the page. To close Find, tap outside the box. To
return to your original page, tap the title and then tap Return on the Pop-up menu.
Copy Text. You can copy text from books that support this feature into any program that accepts text. On a book
page, select the text you want to copy. Then, tap Copy Text on the Pop-up menu. The text can be pasted into the
program of your choice.
Bookmarks. When you add a bookmark to a book, a color-coded bookmark icon appears in the right margin. You
can add multiple bookmarks to a book. Then, from anywhere in the book, tap the bookmark icon to go to the
bookmarked page.
•
•
Highlights. When you highlight text, it appears with a colored background.
Notes. When you attach a note to text, you enter the text in a note pad that appears on top of the book page. A
Note icon will display in the left margin. To show or hide the note, tap the icon.
•
•
Drawings. When you add a drawing, a Drawing icon appears in the bottom-left corner of the page, and drawing
tools appear across the bottom of the page. Draw by dragging your stylus.
To see a list of a book’s annotations, including bookmarks, highlights, text notes, and drawings, tap Annotations
Index on the book’s cover page. To go to the annotated page, tap an entry in the list.
Removing a Book
•
•
When you finish reading a book, you can delete it to conserve
space on your device. If a copy of the book is stored on your
PC, you can download it again at any time.
To remove a book from your device, tap and hold the title in
the Library list, and then tap Delete on the Pop-up menu.
94
Picture
•
•
•
Pictures collects, organizes and sorts picture files on your
device.
Download images to your PC, and then use ActiveSync to
copy the files to your Pocket PC Phone.
View the images as a slide show
Pictures can also be stored and transferred to your
device from an MMC, SD or digital camera card.
Insert a card into the memory card slot and then
copy or drag the pictures from your PC to the My
Documents directory on the memory card (If the
memory card does not have a My Documents
directory you must create one first).
Transferring images to your Pocket PC Phone:
Pictures stored on your PC can be synchronized with Pictures on your device. Picture synchronization is not
automatically selected in ActiveSync. For more information on synchronization, see ActiveSync Help on the PC.
Finding and list pictures:
1.
2.
Tap Start, Programs, and Pictures.
Tap My pictures and select a folder from the
drop-down menu.
95
Sorting pictures:
1.
Tap Start, Programs, and Pictures.
2.
Tap My pictures and select a folder from the
drop-down menu.
Deleting an image:
Hold the stylus firmly on the file name of the picture you want to delete, and then select Delete from the Pop-up menu.
Refreshing all images:
On the Pop-up menu, tap Refresh, the file information on picture list will be refreshed.
Customizing Pictures:
You can opt to launch the Pictures program automatically when a digital camera storage card is inserted and decide
on a time delay length between slides when showing a slideshow.
To select launch automatically:
1.
2.
3.
Tap Start, Programs, and Pictures.
Tap Tools, Options and then General.
Then check the box next to Detect digital camera
storage cards.
Note: Your device supports more than 16-bit color so
dithering is not necessary.
96
To select the time delay between slides:
1.
2.
3.
Tap Start, Programs, and Pictures.
Tap Tools, Options and then Slide Show.
Then select a number of seconds and tap OK.
97
Appendix A: Troubleshooting
Reset the Pocket PC Phone and Clear Memory
You can perform a soft reset or a hard reset, depending on the situation: a hard reset, in the sense that you will lose all
data and any software you have installed yourself, is similar to reinstalling your OS on your PC; a soft reset is similar
to restarting your desktop.
If your Pocket PC Phone responds slowly, stops responding or freezes, try performing a sot reset. This causes the
Pocket PC Phone to restart and re-adjust memory allocation. Unsaved data in open windows may be lost.
Performing a soft reset:
•
Use the stylus to press and hold the Reset button for about two seconds. (For details on finding the soft reset
button, see, “Chapter 2, Bottom Edge Features.”)
Performing a hard reset:
Warning: Clearing memory deletes all data and restores the Pocket PC Phone to its default settings. Programs
installed at the factory remain, while data you have created and programs you have installed are erased.
1. Unscrew the stylus and use the smaller point of the top-half.
2. Press the battery switch and hold down the power button to
turn it off. Repeat to turn it back on.
Use ActiveSync to keep a backup of your Pocket PC Phone data so that if you need to clear
memory, you can restore the data on your Pocket PC Phone. For more information, see
ActiveSync Help.
98
Battery loses Power
When the battery is low, you will see a battery icon (
- main battery low,
- main battery very low) in the status
bar of the screen and a Pop-up screen to tell you to recharge the battery as soon as possible. The battery is split into
two portions: main battery and backup battery. When the main battery portion is discharged your device will power off.
However, the backup battery portion for 72 hrs will preserve your data. If the backup battery portion is discharged, you
run the risk of losing the data on your Pocket PC Phone.
You want your Pocket PC Phone battery charge to last as long as possible, especially when you’re on the road. Under
normal conditions, you can get many hours of use from a single set of batteries or from a full charge. Here are a few
tips to help you get the most from them.
Use external power whenever possible
Use the AC adapter to plug your Pocket PC Phone into external power whenever possible, especially when:
•
Establishing a remote connection.
•
•
•
Using the backlight feature of your Pocket PC Phone display.
Connecting to a PC.
Letting the notification light flash for extended periods.
Shorten auto suspend time
While on battery power, your Pocket PC Phone automatically suspends operation if you haven’t touched the
hardware buttons or used the stylus for a specified period. Maximize battery life by shortening the time. Tap
and
then Settings. On the System tab, tap Power, and then adjust the On battery power setting.
Turning off sounds
The Pocket PC Phone produces sounds in response to a number of events, such as warnings, appointments, and
screen taps or hardware button presses. To optimize battery life, turn off any sounds you don’t need. Tap
then Settings. On the Personal tab, tap Sounds & Reminders and clear check boxes on the Volume and
Reminders tabs.
and
To turn off notification light:
Tap
and then Settings. On the Personal tab, tap Sounds & Notifications. On the Reminders tab, clear the
Flash light for check box.
If you forget your password
If you forget your password, you’ll need to clear memory on the Pocket PC Phone. See Reset the device and clear
memory earlier in this appendix.
If you run out of Phone memory
Memory on your Pocket PC Phone is shared between storage memory and program memory. Storage memory is
used to store the information you create and programs you install. Program memory is used to run programs on your
Pocket PC Phone. Pocket PC Phone automatically manages the allocation between storage and program memory.
However, in some situations, such as when memory is low, Pocket PC Phone may not be able to automatically adjust
the allocation. If you receive a message stating that storage or program memory is unavailable, try the following
solutions.
Finding space in storage memory:
•
Move data to a MMC/ SD storage card.
99
•
•
Tap
, Programs, and then File Explorer. Tap and hold the file you want to move, and tap Cut. Browse to the
My Documents folder in the storage card folder, tap Edit, and then tap Paste. Files stored in folders other than My
Documents or stored in folders within folders in My Documents may not show up in the list view of some
programs. When using Notes, Pocket Word, or Pocket Excel, you can also move files by opening the item and
tapping Tools (in the Notes program) or Edit (in Pocket Word or Pocket Excel) , then Rename/Move.
Move e-mail attachments. In Inbox, tap Tools and then Options. On the Storage tab, select Store attachments
on storage card. All attachments are moved to the storage card, and new attachments are automatically stored
on the storage card.
•
•
Set programs such as Notes, Pocket Word, and Pocket Excel to automatically save new items on the storage
card. In the program, tap Tools and then Options.
If you are copying files from your PC or another device to your Pocket PC Phone, try adjusting the slider in the
Memory setting. Tap
and then Settings. On the System tab, tap Memory and check whether the slider can
be adjusted manually before copying files.
•
•
Delete unnecessary files. Tap
, Programs, and then File Explorer. Tap and hold the file, and then tap
Delete on the Pop-up menu. To find your larger files, tap
KB, and then tap Go.
and then Find. In the Type list, tap Larger than 64
In Internet Explorer options, delete all files and clear history. In Internet Explorer, tap Tools and then Options.
Tap Delete Files and Clear History.
•
•
Remove programs you no longer use. Tap
Tap the program you want to remove and then Remove.
Clear program memory as described in the following section. This will free some program memory so that it can
be allocated to storage memory.
and then Settings. On the System tab, tap Remove Programs.
To find space in program memory:
•
Stop programs you are not currently using. In most cases, programs automatically stop to free needed memory.
However, in some situations, such as when confirmation dialog boxes are waiting for a user response, the
program may not be able to automatically stop. To check the state of your active programs, tap
and then
Settings. On the System tab, tap Memory and then the Running Programs tab. Tap the program you want to
view and then tap Activate. Close any open windows or messages and return the program to list view. If this
doesn’t work, you can stop the program manually. First, make sure that closing open items and returning the
program to list view save your work. Then, stop the program by tapping Stop or Stop All on the Running
Programs tab.
•
•
Clear storage memory as described in the preceding section. This will free some storage memory so that it can be
allocated to program memory.
Reset your Pocket PC Phone can release the program memory, you can do it as described in Reset the Pocket
PC Phone and clear memory earlier in this appendix.
Screen Freezes or Responds Slowly
Reset your Pocket PC Phone. See Reset your Pocket PC Phone and clear memory earlier in this appendix.
Screen is Blank
If your Pocket PC Phone doesn’t respond when you briefly press the Power button, press and hold the button for a full
second. If that doesn’t work:
•
•
Plug the AC power into device.
Reset the device. See Reset the device and clear memory earlier in this appendix.
100
Screen is Dark
Prolonged exposure to direct sunlight may cause your Pocket PC Phone screen to temporarily darken. This is normal
for LCD screens and is not permanent.
Screen is Hard to Read
If you’re having a hard time viewing a document in Notes, try changing the size of the view. To do this, tap a zoom
percentage on the Tools menu. In Pocket Word and Pocket Excel, on the View menu, tap Zoom and then select a
zoom percentage. In Pocket Internet Explorer, on the View menu, tap Text Size and then select a size.
If you’re having a hard time viewing Pocket Outlook data, try enlarging the display font. To do this within Calendar,
Tasks, or Contacts, tap Tools, then Options, and then select Use large font.
Inaccurate Response to Stylus Taps
Adjust the touch screen to respond more accurately to screen taps. Tap
and then Settings. On the System tab,
tap Screen Calibration, then Align Screen.
Slow or No Response
Reset your Pocket PC Phone. See Reset the Pocket PC Phone and clear memory earlier in this appendix.
Infrared (IR) Connection Problems
If you are unable to use IR to transfer information, try the following:
•
•
Transfer only one file or no more than 25 contact cards at a time.
Line up the IR ports so that they are unobstructed and within close range.
•
•
Make sure nothing is between the two IR ports.
Adjust the room lighting. Some types of light interfere with IR connections. Try moving to a different location or
turning off some lights.
Phone Connection Problems
If you have a problem using your phone, try the following:
•
Check your wireless connection to your mobile service provider is switched on and the signal unobstructed (For
more information, see Checking you are Connected).
•
Contact your mobile phone service provider for help.
Internet Connection Problems
The following connection problems may occur. Additional troubleshooting information is available in Connections
Help on the Pocket PC Phone and ActiveSync Help on the PC.
•
Check you have set up and connected to an Internet service provider.
•
Check your wireless connection to your mobile service provider is switched on and the signal unobstructed (For
more information, see Chapter 3 “Checking you are Connected”).
•
•
Check Verify with your Internet service provider that your user name and password are correct.
Verify with your Internet service provider that the network you are trying to connect is available, or try to connect
to it from another PC.
101
Network Connection Problems
The following connection problems may occur. Additional troubleshooting information is available in Connections
Help on the Pocket PC Phone and ActiveSync Help on the PC.
•
Check your wireless connection to your mobile service provider is switched on and the signal unobstructed (For
more information, see Chapter 3 “Checking you are Connected”).
•
Verify that you have added necessary server information. Tap
tap Network. Most networks use DHCP, so you should not have to change these settings unless your network
and then Settings. On the Connections tab,
administrator instructs you to do so.
•
If Network Connection isn't listed as a connection method in the ActiveSync dialog box when starting
synchronization, wait a few minutes and try again. Also, if synchronization does not start right away, the network
is probably busy, and it may take a minute for your Pocket PC Phone to connect to the network.
Verify with your network administrator that your user name and password are correct.
•
•
Verify with your network administrator that the network you are trying to connect is available, or try to connect to
it from another PC.
•
You may need to change the device name if you are trying to connect to a network and cannot because another
Pocket PC Phone with the same name is already connected. To change the Pocket PC Phone name, tap
and then Settings. On the System tab, tap About, and then the Device ID tab.
Cable and Cradle Connection Problems
The following solutions may help if you encounter problems when connecting to your PC. Additional troubleshooting
information is available in Connections Help on the Pocket PC Phone and ActiveSync Help on the PC.
•
Ensure the Pocket PC Phone is turned on.
•
•
Ensure that you do not have any other active connections. Tap
bottom of the screen and then Disconnect.
Ensure the cable is securely plugged into the COM port on the back of your PC. Use the cable that came with the
Pocket PC Phone without any extra cables or extenders attached.
and then Today. Tap
or
at the
•
Plug the other end of the cable securely into the correct port on your Pocket PC Phone. If you are using a cradle,
push your Pocket PC Phone securely into the cradle.
102
Appendix B: Regulatory Notices
Regulatory Agency Identification Numbers
For regulatory identification purposes your product is assigned a model number PW10xx.
The following accessories have been evaluated for use with your device. Their assigned model numbers
listed below can identify these approved accessories. To ensure continued reliable and safe operation of
your Pocket PC Phone, use only the accessories listed below with your PW10xx.
Accessories
Pocket PC Phone
Cradle
Model Number
PW10xx
PW15x
Note 1: The above “x” may be any alphanumeric character or blank denoting external cosmetic changes.
Note 2: This product is intended for use with certified Class 2, rated 5 V dc, minimum 1A power supply unit.
European Union Notice
Products with CE marking comply with the R&TTE Directive (99/5/EC), the EMC Directive (89/336/EEC) and
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms (in brackets are the
equivalent international standards):
EN 60950 (IEC 60950) - Safety of Information Technology Equipment
ETS 300 342-1 (June 1997) - Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) for European digital cellular telecommunications system; Part 1:
Mobile and portable radio and ancillary equipment
ANSI/IEEE C.95.1-1992- specific absorption rate in mobile phone emission condition for body health
FCC part 15 and part24
EN50360, EN50361 for SAR
SAR: 0.892mW/10g
103
Important Safety Information
INTRODUCTION
It is important you read this manual before using your device (Pocket PC) to ensure its proper operation.
It is recommended that important data stored in your device should be saved to a memory card (sold separately) or
your personal computer (data transfer with ActiveSync®) on a regular basis. Before returning your unit for service,
be sure to back up your data and remove any confidential, proprietary or personal information. Audiovox
Communications Corp. is not responsible for damage to or loss of any programs, data or removable storage media.
The purpose of the Safety Instructions in this manual is to provide you with warnings and safety instructions that
will assist in preventing the misuse of your device.
•
All of the Safety Instructions that are contained in this manual must be read carefully and must be fully
understood before you attempt to use your device in order to avoid potential hazards that could cause bodily
injury or property damage, or could result in damage to your device or loss of data.
•
Always keep this manual in a convenient place for future reference.
TRADEMARK INFORMATION
•
Microsoft, ActiveSync, Outlook, Pocket Outlook, Windows, Windows NT, and the Windows logo are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft
Corporation.
•
Other product names mentioned in this manual are trademarks or registered trademarks of the respective
companies. Please note that coping and modifying, changing or editing any material on the Internet, except
using it privately for non-commercial purpose, may infringe the author's copyright protected by the Copyright
Act.
SAFETY INSTRUCTIONS
There are two categories of Safety Instructions included in this manual:
ꢀ
ꢀ
Product Warnings, (i.e., what must never be done to assure avoiding those hazards that could cause
bodily injury or property damage.
User Directions (i.e., what must always be done to assure the safe use of your device).
The Safety Instructions contained in this manual have been categorized in accordance with the
seriousness of the potential hazards through the use of Signal Words.
Those Signal Words, and their intended meanings, are as follows:
ꢀ
DANGER: Indicates that a failure to observe the Safety Instructions could result in death or catastrophic
bodily injury.
ꢀ
ꢀ
WARNING: Indicates that a failure to observe the Safety Instructions could result in serious bodily injury.
CAUTION: Indicates that a failure to observe the Safety Instructions could result in minor bodily injury or
property damage.
ꢀ
NOTE: Designates important information that relates to activities and/or conditions that might result in loss
of data and/or damage to your device.
Safe Use And Operation of Your Device
All portable computers produce low levels of RF energy due to the generation of digital timing pulses by its clock
oscillator circuits. Your device has been equipped with internal shielding to minimize stray emissions of RF energy.
Airlines may nevertheless prohibit the on-board use of portable PCs (and all other portable electronic devices that
could potentially emit stray RF energy), particularly during take-offs and landings, to prevent any possible
interference with the reception of signals by airborne electronic navigational devices. Other locations, such as
hospitals, may also restrict the use of Pocket PC’s and other devices that emit low-level RF energy.
104
WARNING
ꢀ
Always request and obtain prior consent and approval of an authorized airline representative before using your
device aboard an aircraft.
ꢀ
Always follow the instructions of the airline representative whenever using your device aboard an aircraft, to
prevent any possible interference with airborne electronic equipment.
WARNING
ꢀ
Always comply with posted prohibitions of the use of RF-emitting devices, such as in hospitals. Failure to
follow such directives could result in the interference with medical equipment and/or devices.
ꢀ
Never come closer than 6 inches to a person with a heart pacemaker implant when using this device. Failure to
do so could result in interference with the function of the pacemaker.
WARNING
ꢀ
Never use your device while driving an automobile or any other moving vehicle. Always pull out of traffic and
come to a stop in a legally permissible and safe location before using your device. Failure to do so could result
in serious bodily injury in a traffic accident.
ꢀ
Never use your device while walking. Usage while walking could result in bodily injury caused by inattention to
automobile traffic or other pedestrian hazards.
WARNING
ꢀ
Never allow metallic objects, such as staples and paper clips, to enter inside your device. Metallic objects,
such as staples and paper clips, if allowed to enter your device, could cause the generation of excess heat or
fire.
ꢀ
ꢀ
Never connect terminals (metal parts) to metallic objects (such as wires). Connecting terminals to metal
objects could cause excessive heat or fire.
Always immediately disconnect the AC Adapter from the power outlet and turn the battery switch to the “Stop”
position in the event the device emits an unusual odor or sound or generates smoke.
WARNING
ꢀ
Never use or store your device in the following locations:
o
o
o
Anywhere it may be exposed to water, such as a bathroom or sauna;
In conditions of high humidity, such as in the rain or fog;
Where your device will be exposed to high temperatures, such as near a fire or equipment that emits
high temperatures
o
o
In direct sunlight; or
In a sealed automobile left in the sun and subject to high temperatures.
ꢀ
Never store or transport flammable liquids, gases or explosive materials in the same compartment of your
automobile as the device or any of its accessories, as possible sparking in the PC could cause ignition or
explosion.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
When driving, always secure your device in its softcase, when it is not in use. Never place your device on the
passenger seat or any place else in the car where it can become a projectile during a collision or stop.
Never drop your device or subject it to severe shock. Dropping your device or subjecting it to severe shock
could cause the built-in battery to leak, ignite and/or rupture.
Always immediately remove your device and its battery from the vicinity of any source of heat, such as an open
flame, in the event the built-in battery leaks liquid or emits an unusual odor.
Continued use of your device under either of these conditions could cause ignition (i.e., fire) of the leaked
battery liquid, or rupture.
Never touch any fluid that might leak from the built-in battery. Such liquid when in contact with the eyes or skin,
could cause injury to the skin or eyes. Should the liquid come into contact with the eyes, irrigate the eyes
thoroughly with clean water and immediately seek medical attention. In the event the liquid comes into
contact with the skin or clothing, wash it away immediately with clean water.
ꢀ
Failure to follow the above directions concerning use and storage could result in bodily injury and/or property
damage due to battery liquid leakage, fire or rupture. Failure to follow the above directions concerning use and
storage could also result in damage to your device.
105
WARNING
Always use authorized Audiovox accessories and optional devices when operating this device, as the use of
ꢀ
incompatible auxiliary equipment could result in fire, electric shock or other bodily injury. The use of
unauthorized accessories will also void your Warranty.
WARNING
Never attempt to disassemble, repair or make any modification to your device. Disassembly, modification or
any attempt at repair could cause bodily injury or property damage, as well as damage to the device itself.
ꢀ
WARNING
Your device is not a toy. Never allow children to play with your device. Misuse, rough or improper handling of
ꢀ
your device by children could result in serious bodily injury for any of the enumerated safety warnings in this
manual. In addition, always keep all accessories and components out of the reach of small children as small
parts might present a choking hazard. Seek immediate medical attention if choking occurs or if any small part
has been swallowed.
CAUTION
ꢀ
Never raise the sound volume level too high when using your device with earphones. An excessive sound
volume level could cause damage to your hearing.
ꢀ
Never touch the liquid that might leak from a broken liquid crystal display. Contact with this liquid could cause
a skin rash. If the crystal display liquid should come into contact with the skin or clothing, wash it immediately
with clean water.
NOTE
ꢀ Under certain conditions, data may be lost, including:
o
o
o
o
o
o
Failure to follow all instructions for use and warnings in this manual.
Misuse of your device;
Subjecting the main unit of your device to static electricity and/or noise;
Total loss of electric charge in the built-in battery; and
Servicing of your device.
Use of your device in locations where the following ambient environmental conditions are exceeded:
ꢀUnder normal operational use ambient temperatures not less than 32°F and not in excess of
104°F (0°C and 40°C);
ꢀWith humidity of not less than 30% or in excess of 80%; and
ꢀWhen charging the battery ambient temperatures not less than 41°F and not to exceed 95°F
(5°C and 35°C).
ꢀ
Do not store or use your device in the following locations:
o
o
o
o
Those subject to extremely high or low temperatures;
Dusty locations; and
Locations or sites subject to strong vibration.
Use or storage in these location, sites or areas can result in product failure, malfunction or loss of data.
ꢀ
ꢀ
Avoid connecting your device to an external device such as a computer in an environment likely to be affected
by static electricity. For example, during low-humidity weather, shuffling your shoes upon a rug can produce
static electricity. Before you handle your computer, you should touch a grounded object to discharge any static
electricity from your body.
Do not subject your device to sudden and severe temperature changes. This could result in moisture
condensation in the device that could cause damage to your device, computer function loss, and/or the loss of
data. In the event of moisture condensation, allow your device to dry out completely.
ꢀ
ꢀ
ꢀ
It is normal for the AC Adapter to become warm when charging.
Disconnect the power plug from the outlet when not in use.
Take care not to sit on device when it is located in the back pocket of trousers, etc. This could cause damage
to your device or malfunction of the device functions.
ꢀ
Do not place objects on top of your device or drop them on top of your device. This could cause damage to
your device and/or malfunction.
106
ꢀ
ꢀ
Never paint or apply any foreign substance to this device as this can clog and damage moving parts.
Clean terminals (metallic parts) on a regular basis with a dry cotton swab. Dirty terminals could affect battery
charging.
ꢀ
ꢀ
Never use organic solvents such as benzene or paint thinner to clean your device. Use of these solvents can
cause deformation or discoloration. Wipe dirty parts with a soft dry cloth.
Do not wipe the display with a damp or wet cloth or touch the display with damp or wet hands. Wiping or
touching the display under this condition can cause product failure or malfunction. Always use a soft dry cloth
to wipe the display.
ꢀ
ꢀ
ꢀ
When using the optional “SD memory card”, be sure to read the relevant instruction manual and ensure that
you know the proper procedures for their use and compatibility with your device.
Never subject the card to any severe shock while connected to your device. Such a shock can cause damage
to the card and a malfunction.
Do not carry your device with the card connected to it. This can result in the damage or loss of the card.
SAFETY INSTRUCTIONS
ꢀ
When the device is operating, do not insert or remove the “SD memory card” into or out of the SD card slot or
connect or disconnect the device from the cradle as this may cause loss of stored data, or product
failure/malfunction.
ꢀ
ꢀ
Never connect cradle terminals with metallic objects, such as wires. Connecting these terminals with metallic
objects may cause the production of excess heat, burns and damage to the charger and/or your device.
To avoid eye strain, take frequent visual breaks, focusing on objects located at a distance greater than 15 feet.
SAFE USE AND OPERATION OF DEVICE (WIRELESS HANDHELD PHONE)
Read this information before using your device. Your device is a low power radio transmitter and receiver. When it
is ON, it receives and also sends out radiofrequency (RF) signals.
FCC RF EXPOSURE INFORMATION
In August 1996, the Federal Communications Commission (FCC) of the United States, with its action in Report and
Order FCC 96-326, adopted an updated safety standard for human exposure to radiofrequency (RF)
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards bodies. The design of this device complies with
the FCC guidelines and these international standards.
Use only the supplied or an approved antenna. Unauthorized antennas, damaged antennas, modifications, or
attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Please contact
your local dealer for replacement antenna.
PHONE OPERATION
When speaking into the Microphone or the Earphone Microphone, a minimum separation distance of 1 inch (2.5
cm) must be maintained between the user's face and the device, including its antenna, to comply with the FCC
exposure limits. This particular device has not been designed for held-to-ear use and should never be used against
the ear. In front of your face, hold the device keeping distance from your body. or, In front of your face, hold the
device wearing the earpiece keeping distance from your body.
Tips on Efficient Operation:
For your phone to operate most efficiently:
ꢀ
Do not touch the antenna unnecessarily and keep the antenna from metal when the phone is in use. Contact
with the antenna affects call quality and may cause the phone to operate at a higher power level than
otherwise needed.
WARNING
DRIVING
Never use a device and/or cell phone while driving an automobile or any other moving vehicle. Always pull out of
traffic and come to a stop in a legally permissible and safe location before using your device. Failure to do so could
result in serious bodily injury in a traffic accident.
107
WARNING
ELECTRONIC DEVICES
Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be
shielded against the RF signals from your device.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of six (6") inches must be
maintained between your device and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research and recommendations of Wireless Technology
Research.
Persons with pacemakers:
ꢀ
Should ALWAYS keep the device more than six (6”) inches from their pacemaker when the device is turned
ON.
ꢀ
ꢀ
Should not carry the device in a breast pocket.
If you have any reason to suspect that interference is taking place, turn your device OFF immediately.
WARNING
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check
with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Turn your device OFF in any facility where posted notices require so.
AIRCRAFT
FCC regulations prohibit using your device while in the air. Turn your device OFF before boarding an aircraft.
BLASTING AREAS
To avoid interfering with blasting operations, turn your device OFF when in a “Blasting area” or in areas posted
“Turn off two-way radio”. Obey all signs and instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn your device OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a
potentially explosive atmosphere are often, but not always marked clearly. Potential areas may include: fueling
areas (such as gasoline stations); below deck on boats; fuel or chemical transfer or storage facilities; vehicles
using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles
(such as grain, dust, or metal powders); and any other area where you would normally be advised to turn off your
vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment,
in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
CAUTION
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may
want to consult your service provider [or call the customer service line to discuss alternatives].
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if they are
adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this
information.
Turn your device OFF in health care facilities when any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. “Device
OFF” means to turn the Radio Standby Switch “OFF”, then turn the power off using thePower button.
108
SAR Information
Specific Absorption Rate
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the
emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the
U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard
for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in
positions and locations (e.g., worn on the body) as required by the FCC for each model. The highest SAR value for
this model phone tested when being worn on the body, as described in this user guide, is 0.56W/kg. (Body-worn
measurements differ among phone models, depending upon available accessories and FCC requirements). While
there may be differences between the SAR levels of various phones and at various positions, they all meet the
government requirement for safe exposure.The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC and can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID CJ6CET0200MT.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications &
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6
watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to account for any variations in
measurements.
General Precautions
Heed service markings: Except as explained elsewhere in the Operating or Service documentation, do not
service any product yourself. Service needed on components inside these compartments should be done by an
authorized service technicians or provider.
Damage requiring service: Unplug the product from the electrical outlet and refer servicing to an authorized
service technicians or provider under the following conditions:
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Liquid has been spilled or an object has fallen into the product.
The product has been exposed to rain or water.
The product has been dropped or damaged.
There are noticeable signs of overheating.
The product does not operate normally when you follow the operating instructions.
109
Avoid hot areas: The product should be placed away from heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
Avoid wet areas: Never use the product in a wet location.
Avoid pushing objects into product: Never push objects of any kind into cabinet slots or other openings in the
product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.
Mounting Accessories: Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting
of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended
by the manufacturer.
Avoid unstable mounting: Do not place the product with an unstable base.
Use product with approved equipment: This product should be used only with personal computers and options
identified as suitable for use with your equipment.
Adjust the volume: Turn down the volume before using headphones or other audio devices.
Cleaning: Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning, but NEVER use water to clean an LCD screen.
Safety Precautions for Power Supply Unit
Use the correct external power source: A product should be operated only from the type of power source
indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your
authorized service provider or local power company. For a product that operates from battery power or other
sources, refer to the operating instructions that are included with the product. Handle battery packs carefully:
This product contains a Lithium Polymer battery. There is a risk of fire and burns if the battery pack is handled
improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external
contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60°C (140°F).
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH SPECIFIED BATTERIES. DISPOSE OF USED
BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR
REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.
Appendix D: Hardware Specifications
Feature
Component
PDA module: Processor
Intel Cotulla Processor 400MHz CPU
SDRAM 32MB; Flash ROM: 32MB
Memory
Radio
LCD module
CDMA EVDO backwards compatible to 1xRTT
3.5” 240x320 pixels, 65K colors transflective TFT.
Buttons
Four buttons (2 CDMA and 2 Windows CE AP buttons -
programmable); power and back light control; navigation pad for
scroll up, down, left, right and action; volume adjustment button.
101 mm, maximum diameter 4.5 mm
Stylus
Notification
One LED or Vibration motor for CDMA, and PDA for event/standby
alarm, charging.
Audio
Built in Microphone and speaker; one earphone/ microphone jack
with stereo sound; MP3 stereo
Interface
Power
Accessories
Feature connector (RS-232, USB and DC power); infrared IrDA SIR.
Rechargeable battery Li-Polymer; 3.7V 1500 mAh; built in charger.
AC adapter (input: 100-240Vac, 50-60Hz, 0.2A; output: 5VDC, 1A
Max, 5W)
USB cradle; earphone plug; service kit; protective pouch.
110
Appendix E: Icons
Phone
Phone off (Flight Mode) or out of network service -- Tap to turn off flight mode.
In network service -- Tap to turn on flight mode.
Shows your connection is at full strength.
Call Missed, tap to view call(s) you missed.,
E-mail or SMS notification, tap to view SMS or E-mails not read.
Synchronization proceeding, the icon will disappear when synchronization has finished.
Send button, press to make a phone call.
End button, press to end a call.
Talk, tap to make a phone call in phone dialer.
End, tap to end a call in phone dialer.
Erase, tap to erase numbers you inputted one by one. Or tap and hold the icon to erase the whole number
you input in phone dialer.
Notes, tap during a call to make a note for that particular call in phone dialer.
Speed Dial, tap to view the speed dial list.
Call History, tap to view call details.
Incoming call, notifies you of an incoming call.
Outgoing call, notifies you of an outgoing call.
Missed call, notifies you of a missed call.
111
Pocket PC
Start menu, tap to pull down the start menu.
System volume, tap to adjust the volume both for phone and Pocket PC.
Power low, notifies you the battery is in the power low status.
Power very low, recharge the device to avoid the data lost.
Connection is active, the icon will disappear when your device is connected.
Synchronization proceeding, the icon will disappear when synchronization is complete.
Instant message notification, tap to read the content of instant message.
E-mail or SMS notification, tap to view SMS or E-mail not read.
Establishing the connection, the icon will be disappear when the connection is established.
Icon room, If more notification icons need to be displayed than there is room to display them. Tap the icon to
view all notification icons.
ActiveSync, synchronizing information between your device and PC.
Calendar, keeps track of your appointments and create meeting requests.
Contacts, keeps track of your friends and colleagues.
Inbox, send and receive e-mail/ SMS messages.
Pocket Internet Explorer, browsing Web and WAP sites, and download new programs and files from the
Internet.
Notes, creates handwritten or typed notes, drawings, and recordings.
MS-Reader, read E-books on your device.
Pictures, view JPG and GIF format pictures on your device.
Tasks, keeps track of your tasks.
Pocket Excel, create new workbooks or view and edit Excel workbooks.
Pocket Word, create new documents or view and edit MS-Word documents.
MSN Messenger, send and receive instant messages with your MSN Messenger contacts.
Phone, make and receive calls, swap between calls and set up conference calling.
112
SD Backup, backup your Pocket PC Phone files to an SD card.
Windows Media Player, enables the multimedia function on your Pocket PC Phone.
Buttons, assigns the application program to hardware button.
Input, select an input method.
Menu, customize what appears on the
menu, and to enable a Pop-up menu from the New
button.
Owner Information, enter your contact information.
Password, limit access to your device.
Phone, setup the phone function of your wireless feature.
Sound and notification, sets the notification type, event, and volume.
Today, customize the look and information that is displayed on the Today screen.
Backlight, customize the backlight, and adjust the brightness.
Clock, change the time or set the alarm.
Power, maximizes battery life.
Regional settings, customize the region and relative format for the region you use.
Remove programs, removes some application program(s) not used frequently.
Screen, re-calibrate the screen.
Beam, use universal beaming to send contacts to a range of infrared equipped handheld devices.
Wireless modem, allows you to use your phone as a wireless modem connection.
113
|