Addonics Technologies DCHDSAEU User Manual

Addonics  
T E C H N O L O G I E S  
Diamond Combo Hard Drive  
DCHDSAES & DCHDIES  
DCHDIEU & DCHDSAEU  
User’s Guide  
Version 1.0  
For IDE Drive  
Note: Set up your IDE hard drive  
Cable Connections  
as Master device  
Connect the 4-Pin Molex cable to  
the power connector on the IDE  
hard drive. Carefully place the IDE  
hard drive with the label facing up  
into the Diamond enclosure. Push  
the hard drive towards the back end  
to secure the drive connectors onto  
the Diamond enclosure’s IDE  
connector.  
Mini-Din power  
connector  
Step 4  
eSATA  
connector  
On / OFF  
switch  
Turn the Diamond enclosure over  
with the hard drive mounting holes  
facing up. Use the included flat  
head screws to secure the hard  
drive onto the bottom of the  
enclosure and turn in the screw to  
the “LOCK” position.  
Power: Connect the 6-pin Mini DIN power cable (provided) to the 6-pin  
Mini DIN power connector located at the back of the enclosure.  
Data:  
Model: DCHDSAES & DCHDIES  
Connect the eSATA to eSATA cable to the eSATA connector located at  
the back of the enclosure and the other end of the eSATA cable to the  
eSATA connector on your SATA host controller with eSATA ports.  
Model: DCHDSAEU & DCHDIEU  
Connect the eSATA to eSATA cable to the eSATA connector located at  
the back of the enclosure and the other end of the eSATA cable to the  
eSATA connector on the USB2.0 to eSATA adapter. You can now plug  
the adapter to a USB port on your system.  
Powering On Enclosure: To power on the enclosure, move the switch  
located at the back of the enclosure to the ON mode. When the switch is  
turned on, the LED light beside it would light up to indicate power and  
also drive access.  
Note: There are no drivers needed to use the eSATA cable as long  
as the drivers are installed for the Serial ATA Controller card/chip. It  
is plug and play.  
Cable Connections When Used as an Internal Hard Drive  
Technical Support  
Power: Use either the 4-pin Molex or the 15-pin SATA power connector.  
Do not use both power sources simultaneously.  
If you need assistance to get your unit functioning properly, please call Addonics  
Technical Support. Our technical staff will be happy to assist you, but they will  
need your help to do so. Calling the technical support staff without all the proper  
information can be both time consuming and frustrating. Here are some tips to  
help you out:  
Data:  
Connect the SATA cable to the SATA connector located at the back of the drive  
cradle and the other end to the SATA connector on your SATA host controller or  
onboard SATA port.  
MODEL NUMBER Please have this number on hand.  
SYSTEM INFORMATION Type of computer, peripherals, etc.  
OPERATING SYSTEM What version of Windows  
WHAT’S THE TROUBLE? – Give enough information  
about your problem so that we can recreate and diagnose it.  
LED cable: Only needed if you want to get drive access signal from the SATA  
controller. Use the LED cable to connect the LED pin located at the back of the  
cradle (beside the LED switch) to the LED jumper pins on your SATA host  
controller or onboard SATA port to enable the drive activity LED.  
Factory default, LED signal coming from hard drive.  
FREE Software Drivers for all Addonics Technologies  
Products are available 24 hours per day at the  
World Wide Web Site: www.addonics.com.  
Powering On Drive Cradle: To power on the drive cradle, slide in the Diamond  
cartridge and using the key (supplied), turn the cradle lock located at the front of  
the cradle to the LOCK position. This will provide power as indicated by the  
green LED lighting up and secure the cartridge.  
Contact Information  
Phone:  
Fax:  
408-433-3899  
408-433-3898  
Email:  
LED DISPLAY Switch  
LEFT LED signal from drive  
RIGHT LED signal from controller  
TECHNICAL SUPPORT  
Phone:  
Hours:  
Email:  
408-433-3855  
8:30 am - 6:00 pm PST  
Power & Drive  
Activity LED  
SATA power  
connector  
SATA data  
connector  
Key Lock Switch  

Maxtor DIAMONDMAX 100451230 User Manual
Lathem ATDDC4 User Manual
Kenwood KDC MP338 User Manual
Hitachi Travelstar HTS541060G9AT00 User Manual
Hitachi Travelstar 5k1000 0J22413 User Manual
Emerson Process Management ITONE IC200BK User Manual
Echo Bear Car CH45342 77412 User Manual
Dell 2500 User Manual
Curtis ALPHA 3GT User Manual
Bunn EASY POUR WS2 User Manual