Emerson Process Management ITONE IC200BK User Manual

iTone™  
Digital Tuning Stereo Clock Radio  
with iPod® Docking Station  
SmartSet® Auto Time Setting System  
and Remote Control  
(U.S. Patent No. 6,567,344)  
Made for all iPod® models including iPod® nano, iPod® shuffle and iPod® mini  
OWNER’S MANUAL  
iC200  
(Silver Color)  
iC200BK  
(Black Color)  
iC200_052906.p65  
47  
29/5/2006, 10:29  
Thank you……………..  
For purchasing this iToneDigital Tuning Stereo Clock Radio with iPod® Docking  
Station and SmartSet® Auto Time Setting System from Emerson Research. This  
compact system has been designed with a powerful amplifier and matching high  
fidelity speakers to produce the kind of sound that you would only expect from a  
much larger, more expensive audio system. There is a built-in iPod® docking station  
that allows you to play any dockable iPod® model* through the speakers of this  
system. In addition while your iPod® is installed in the docking station the internal  
iPod® battery will be recharged automatically. You can even choose to wake up to  
your iPod® in the morning.  
The digital tuner automatically scans the AM and FM bands and locks in stations  
perfectly with no repetitive fine tuning required. And you can save 20 of your favorite  
stations (10 AM and 10 FM) in the preset tuner memory for immediate recall at the  
touch of a button.  
Emerson’s patented SmartSet® Automatic Time Setting System automatically sets  
the clock to the correct year, month, date, day, and time the first time you connect  
the system to your AC outlet, and after every power interruption. It even adjusts for  
Daylight Saving Time changes and Leap Years automatically. The unique dual  
alarm system allows you program one or both of the alarms for weekdays only,  
weekends only, or everyday operation. And you can wake to your iPod® , to the  
radio, or an electronic buzzer that starts softly and gradually increases in volume  
to wake you gently.  
The clock also includes a programmable 99-minute sleep to music timer with auto  
shutoff and a 99-minute Nap timer that will wake you up after a nap without having  
to change your regular alarm settings. Of course we also included a Snooze alarm  
so you can catch a few extra winks after the alarm turns on in the morning, but this  
is not your normal Snooze control. You can activate the Snooze by pressing the  
Snooze button on the top cabinet or the remote control, or you can just wave your  
hand in front of the “TOUCHLESSSNOOZE SENSOR on the front panel.  
The compact 13-key remote control lets you operate all the major functions of  
your system from across the room. And we have even included a stereo headphone  
jack and an Auxiliary Input Jack on the back panel so that you can also connect  
older, non-docking iPods® , MP3 players, and personal CD players.  
2
iC200_052906.p65  
2
29/5/2006, 10:29  
We have taken great care to make sure that every component in your system was  
in perfect working order when the system left our factory. If you experience any  
problems with the set up or operation of this system please do not return it to the  
retail store.  
Please call the Emerson Consumer Products Customer Service Hotline, toll-free,  
at 1-800-898-9020. One of our service technicians will try and help you resolve  
your problem. If the problem cannot be resolved by phone you will be advised of  
the proper procedure to obtain service or a replacement unit.  
Once again thank you for purchasing this Emerson Research iPod® compatible  
audio system.  
(* works with any dockable iPod® introduced prior to January 2006)  
iPod® is a trademark of Apple Computer Inc., registered in the U.S. and other countries.  
3
iC200_052906.p65  
3
29/5/2006, 10:29  
IMPORTANT NOTES  
• Avoid installing this unit in places • Operate controls and switches as  
exposed to direct sunlight or close to  
heat radiating appliances such as  
electric heaters, on top of other stereo  
equipment that radiates too much  
heat, places lacking ventilation or  
dusty areas, places subject to  
constant vibration and/or humid or  
moist areas.  
described in the manual.  
• Before turning on the power, make  
certain that the AC power cord is  
properly installed.  
• When moving the set, be sure to first  
disconnect the AC power cord.  
FCC Information  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequencyenergy  
and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference  
that may cause undesired operation.  
Changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate the equipment.  
4
iC200_052906.p65  
4
29/5/2006, 10:29  
PREPARATION FOR USE  
Unpacking and Set Up  
• This carton contains the main unit, the remote control hand set, iPod® Support  
Bracket and 5 different iPod® adapters so that you can securely connect any  
dockable iPod® to the top mounted docking station. Remove all of the  
components from the carton and remove all packing materials from the  
components. We recommend that you save the carton and packing materials  
if possible in the event that your system ever needs to be retuned for service.  
Using the original carton and packing materials is the only way to protect you  
unit from damage in transit.  
• Remove any descriptive labels from the top or front panels of the main unit. Do  
not remove any labels from the back or bottom panels.  
• Place the main unit on a stable, level surface such as a table, desk, or shelf,  
convenient to an AC outlet, out of direct sunlight, and away from sources of  
water, moisture, heat, dust, dirt, vibration, or strong magnetic fields.  
NOTE: The speakers in this system are not video shielded therefore it is  
not recommended to place this unit on top of your TV set. The magnets in  
the speakers could cause some color distortion in your TV picture.  
• Unwind the AC power cord and extend it to its full length. This is important. The  
FM antenna is built into the AC power cord and must be fully extended for best  
FM reception.  
Protect Your Furniture  
This model is equipped with non-skid rubber 'feet' to prevent the product from  
moving when you operate the controls. These 'feet' are made from non-migrating  
rubber material specially formulated to avoid leaving any marks or stains on your  
furniture. However certain types of oil based furniture polishes, wood preservatives,  
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a  
rubber residue on the furniture. To prevent any damage to your furniture we strongly  
recommend that you purchase small self-adhesive felt pads, available at hardware  
stores and home improvement centers everywhere, and apply these pads to the  
bottom of the rubber 'feet' before you place the product on fine wooden furniture.  
5
iC200_052906.p65  
5
29/5/2006, 10:29  
Battery Back-up System  
This unit includes a battery back up system powered by a built-in, long life CR2430  
lithium battery. The battery maintains the time and alarm settings, the Sleep and  
Nap timer settings, and the preset station tuner memories as well, whenever the  
power is interrupted. If the power is lost the display will go off and the system will  
not operate. However once the power is restored the clock will again reset itself  
and all of your other settings will be correct.  
The lithium battery that was installed in your system can supply back up memory  
power for up to 5 years or even longer. The actual effective life of the lithium  
battery will be affected by the length of time between the date the battery was  
installed at our factory and the date that you connected your unit to your AC outlet,  
and by the number and duration of the power outages that you experience in your  
home. To maximize the life of the back up battery this system should be connected  
to an AC outlet that is always “live”. Do not connect this system to an AC outlet  
controlled by a wall switch.  
When the lithium battery begins to weaken, the Low Battery indicator “  
” will  
begin to flash in the display. When you see this flashing indicator you should replace  
the lithium battery as soon as possible. Instructions for replacing the lithium battery  
will be found at the end of this Owner’s Manual.  
Power Source  
This system is designed to operate on 120V AC 60Hz house current only.  
Connecting this system to any other power source may cause damage to the  
system and such damage is not covered by your warranty.  
NOTE: The system has a polarized AC plug with one wide blade and one  
narrow blade. The plug will only fit into matching polarized AC outlets.  
This is a safety feature to reduce the possibility  
of electric shock. If the plug will not fit in your  
AC outlet, you probably have an outdated non-  
polarized outlet. You should have your outdated  
outlet changed by a qualified, licensed  
electrician. Do not file the wide blade on the  
plug, or use an adapter to make the plug fit into  
AC Outlet  
your outlet. This defeats the safety feature and  
could expose you to electric shock.  
AC Plug  
6
iC200_052906.p65  
6
29/5/2006, 10:29  
LOCATION OF CONTROLS AND INDICATORS  
Front Panel  
4
3
2
2
1
5
6
Top Panel  
12  
13  
14  
11  
10  
15  
9
16  
17  
18  
8
7
25  
19  
24  
20  
23  
21  
22  
7
iC200_052906.p65  
7
29/5/2006, 10:29  
Back Panel  
26  
28  
27  
Left Side Panel  
29  
30  
31  
8
iC200_052906.p65  
8
29/5/2006, 10:29  
1.) TOUCHLESS SNOOZE SENSOR.  
2.) Speakers.  
3.) Multi-Function LED Display.  
4.) iPod® Support Bracket.  
5.) REMOTE SENSOR.  
6.) 3-Volt Lithium Battery Compartment (Bottom Cabinet).  
7.)  
Power “On/Off” Button.  
Buttons.  
8.) Preset  
/
9.) Alarm 1 Button.  
10.) Alarm 2 Button.  
11.) Alarm Mode Button.  
12.) iPod® Support Bracket Mounting Holes (Inside iPod® Sockets Compartment).  
13.) iPod® Sockets Compartment Sliding Door.  
14.)  
Play/pause Button.  
15.) Function Button.  
16.) Band Button.  
17.) Volume +/– Buttons.  
18.) Tuning/Skip (Clock/Time)  
19.) Memory Button.  
20.) Nap Button.  
/
Buttons.  
21.) Sleep Button.  
22.) SNOOZE (Sleep/Nap Off) Button.  
23.) Month/date Button.  
24.) Time Button.  
25.) Time Zone Button.  
26.) AC Power Cord.  
27.) Aux Input Jack.  
28.) Phones Jack.  
28.) Dimmer (High / Low) Selector Switch.  
30.) Alarm 1 (Buzzer / Radio / iPod / Off) Selector Switch.  
31.) Alarm 2 (Buzzer / Radio / iPod / Off) Selector Switch.  
9
iC200_052906.p65  
9
29/5/2006, 10:29  
LED Display  
3
4
5
2
1
6
7
13  
12  
11  
10  
9
8
1.) MUTE Indicator.  
2.) AM Indicator.  
3.) Day Of Week Indicators.  
4.) SLP (Sleep) Timer Indicator.  
5.) NAP Timer Indicator.  
6.) Time, Year, Month/date, Volume Level (00-63), Radio Frequencies Display.  
7.) AL2 (Alarm 2) Indicator.  
8.)  
Battery Low Indicator.  
9.) FM ST. (FM Stereo) Indicator.  
10.) TUNER Select Indicator.  
11.) iPod Select Indicator.  
12.) AUX Select Indicator.  
13.) AL1 (Alarm 1) Indicator.  
10  
iC200_052906.p65  
10  
29/5/2006, 10:29  
Remote Control  
5
4
3
6
7
8
9
2
1
10  
11  
12  
13  
1.) Preset  
Button.  
Button.  
2.) Preset  
3.)  
4.)  
Tuning/Skip Reverse Button.  
Power “On/Off” Button.  
5.) Infrared Transmitter.  
6.) Function Button.  
7.) Volume + Button.  
8.)  
Tuning/Skip Forward Button.  
9.) Volume – Button.  
10.) Band Button.  
11.) Alarm Stop Button.  
12.) Snooze Button.  
13.) Battery Compartment (Back Cabinet).  
11  
iC200_052906.p65  
11  
29/5/2006, 10:29  
Installing The Remote Control Batteries  
The remote control requires two “AAA” batteries, not included. We recommend  
that you use a well known brand of alkaline batteries for longest life and best  
performance.  
Open the remote control battery  
compartment by sliding the battery  
compartment cover in the direction of  
the ‘arrow’.  
Install two “AAA” batteries in the compartment according to the polarity markings  
inside the compartment as shown in the illustration. If the batteries are installed  
incorrectly the remote control will not work. After installing the batteries replace the  
battery compartment cover.  
NOTE: When the operation of the remote control becomes intermittent or stops  
working completely replace the batteries as soon as possible. Never leave  
weak or exhausted batteries in the remote for an extended period of time.  
They may eventually leak and cause permanent damage to the remote control.  
Battery Precautions  
• Replacement of batteries must be done by an adult.  
• Do not mix old and new batteries.  
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)  
batteries.  
• The supply terminals are not to be short-circuited.  
• Non-rechargeable batteries are not to be recharged.  
• Exhausted batteries are to be removed.  
• Only batteries of the equivalent type are to be used.  
• Batteries are to be inserted with the correct polarity.  
• Dispose of batteries properly. Do not dispose of batteries in fire. The batteries  
may explode or leak.  
12  
iC200_052906.p65  
12  
29/5/2006, 10:29  
OPERATING INSTRUCTIONS  
Make sure that you have extended the AC power cord to its full length.  
The FM antenna is built into the power cord.  
Make sure that you have installed two fresh “AAA” alkaline batteries in  
the remote control handset.  
Setting The Time, The First Time  
IMPORTANT: The first time you connect your new SmartSet® clock radio to  
the AC outlet the internal computer will automatically set the time correctly for  
the Eastern Time Zone, which is the initial default setting. The display will  
scan for a few seconds and then show the correct Day and Time in the Eastern  
zone. If you live in the Eastern Time zone, there’s nothing else to do. Your  
clock is set correctly and running.  
If you do not live in the Eastern Time zone you must change the default zone  
display to your own zone. You only do this one time and the SmartSet® will remember  
the new default zone setting and will always return to that setting after a power  
interruption.  
There are 7 time zones programmed into your SmartSet® clock radio as follows:  
ZONE 1  
ZONE 2  
ZONE 3  
ZONE 4  
ZONE 5  
ZONE 6  
ZONE 7  
Atlantic Time  
Eastern Time (Default Setting)  
Central Time  
Mountain Time  
Pacific Time  
Yukon Time  
Hawaiian Time  
To change the default time zone display, depress the Time Zone button.  
The number “02” will appear on the display  
indicating that the default zone is ZONE 2,  
Eastern Time.  
13  
iC200_052906.p65  
13  
29/5/2006, 10:29  
Hold the Time Zone button and then press either the Tuning/Skip (Clock/Time)  
or  
buttons until your own time zone appears on the display, then release the  
buttons.  
The clock display will change to the correct time in the time zone you selected. The  
clock will always return to the correct time in the zone you selected after every  
power interruption. If you move to a different time zone, simply change the default  
zone display to the new zone and the SmartSet® will remember that setting for you.  
Date Display  
To see the correct date at any time, depress the Month/date button. The display  
changes from time to month and date (mm/dd).  
For example, May 21st will appear as “5. 21”.  
When you release the Month/date button the display returns to the correct time.  
Year Display  
To see the correct year, depress the Month/  
date and Time buttons together, the display  
changes from time to year.  
When you release the Month/date and Time buttons the display returns to the  
correct time.  
14  
iC200_052906.p65  
14  
29/5/2006, 10:29  
Daylight Saving and Leap Year Adjustments  
All Daylight Saving and Leap Year adjustments are made automatically by  
the SmartSet® internal computer as follows:  
Start of Daylight Saving Time:  
At “2:00 AM” on the first Sunday in April, the clock will automatically  
advance to “3:00 AM”.  
End of Daylight Saving Time:  
At “3:00 AM” on the last Sunday in October, the clock will automatically  
reset to “2:00 AM”.  
Leap Year:  
At “12:00 Midnight” on February 28th, the calendar display will change  
to "2. 29".  
Important Daylight Saving Time Information  
As a result of the new Energy Bill that was passed by Congress in August of 2005,  
Daylight Saving Time is scheduled to be extended starting in 2007. This SmartSet®  
Clock Radio has been programmed to adjust itself automatically for Daylight Saving  
Time through 2006. We have also provided instructions to allow you to change  
the Daylight Saving starting and ending dates for 2007 and beyond. You only need  
to make this adjustment once and then this clock radio will automatically adjust  
itself for the new Daylight Saving Time through the year 2099.  
The instructions for adjusting the Daylight Saving starting and ending dates will be  
found on a separate addendum sheet included with this Instruction Manual.  
15  
iC200_052906.p65  
15  
29/5/2006, 10:29  
Manual Time Adjustments  
Some people like to set their clocks 5 to 10 minutes fast to make sure that they will  
always be on time. Even though the SmartSet® sets the time by itself, you still have  
the option of adjusting the time manually if you wish.  
To manually adjust the time display depress and hold the Time button, and press  
either the Tuning/Skip (Clock/Time)  
or  
buttons to adjust the time display  
ahead or back as desired. Each press of the Tuning/Skip (Clock/Time)  
or  
buttons will change the display by one minute.  
If you hold the Tuning/Skip (Clock/Time)  
or  
buttons the display will continue  
to change. The display will change slowly at first, one minute at a time. But if you  
continue holding the Tuning/Skip (Clock/Time) or buttons buttons the display  
will change rapidly.  
NOTE: If you manually adjust the time, your new setting is entered into the  
SmartSet® memory. If the power is interrupted, the display will return to your  
new setting, not the original setting, when the power is restored.  
16  
iC200_052906.p65  
16  
29/5/2006, 10:29  
Adjusting The Wake Up Times  
Your SmartSet® clock radio has two separate alarms that can be set and used  
independently. You may use the alarms to wake two people at different times, or  
you may use one alarm for weekdays and the other for weekend wake up times.  
The procedure for adjusting the wake up time is the same for both Alarm 1 and  
Alarm 2.  
1.) Depress and hold either the Alarm 1 or  
Alarm 2 setting button. The display will  
change from the correct time to the  
Alarm 1 or Alarm 2 wake up time.  
2.) While holding the Alarm 1 or Alarm 2 setting button, depress either the Tuning/  
Skip (Clock/Time)  
or  
buttons to move the display ahead or back to your  
desired wake up time.  
3.) When the desired wake up time appears on the display, release the Tuning/  
Skip (Clock/Time) or buttons.  
NOTE: Be sure that you have set the wake up time correctly by observing  
the AM indicator. If the AM indicator is ‘On’ the wake up time is “AM”. If the  
AM indicator is ‘Off’, the wake up time is “PM”.  
4.) When the desired wake up time (AM or PM) appears on the display, release  
the Alarm 1 or Alarm 2 setting buttons.  
17  
iC200_052906.p65  
17  
29/5/2006, 10:29  
Selecting The Alarm Mode  
Your SmartSet® clock radio allows you to select from among three different alarm  
operation modes for either alarm. The alarm modes are:  
Everyday – the alarm will turn on all 7 days.  
Weekdays only – the alarm will only turn on Monday through Friday;  
Weekends only – the alarm will only turn on Saturday and Sunday;  
To check the Alarm Mode setting for Alarm 1, depress the Alarm 1 setting button.  
The display will show the Alarm 1 wake up time and the day of the week indicators  
will show you the alarm mode which is selected.  
• If all 7 indicators are ‘On’, the Everyday  
mode is selected.  
• If only the Monday through Friday  
indicators are ‘On’, the Weekdays only  
mode is selected.  
• If only the Saturday and Sunday indicators  
are ‘On’, the Weekends only mode is  
selected.  
To change the Alarm Mode setting for Alarm 1, hold the Alarm 1 setting button and  
press the Alarm Mode button until the day indicators show the desired mode  
setting, Weekdays only, Weekends only, or Everyday operation.  
Release the Alarm Mode and Alarm 1 setting buttons and the display will return to  
the correct time.  
Follow the same procedure to select the desired Alarm Mode for Alarm 2 if  
necessary.  
Checking The Wake Up Times And Alarm Mode  
Whenever you want to check the wake up time or the alarm mode settings, simply  
press either the Alarm 1 or Alarm 2 setting buttons. The display will change from  
correct time to wake up time and the day indicators will show you the alarm mode  
which is currently selected.  
Release the Alarm 1 or Alarm 2 setting buttons to return to correct time.  
18  
iC200_052906.p65  
18  
29/5/2006, 10:29  
Using The Remote Control  
The remote control unit supplied with this system allows you to perform the following  
operations:  
• Switch the system ‘On’ and ‘Off’.  
• Select the desired function (iPod® / AUX / TUNER).  
• Select the AM or FM bands.  
• Start and pause iPod® playback or shut the iPod® ‘Off’.  
(NOTE: iPod® Shuffle cannot be operated by the remote control.)  
• Select from among your preset stations.  
• Mute the system.  
• Stop/reset the alarms and activate the Snooze function.  
To operate the remote control point the handset at the REMOTE SENSOR on the  
front panel of the main unit and press the desired button on the handset. The  
effective operating range of the remote is approximately 15 feet. The effective  
operating angle is approximately 15 degrees to the left or right of dead center.  
19  
iC200_052906.p65  
19  
29/5/2006, 10:29  
Listening To The Radio  
1.) Press the Power button on the top panel or remote control to turn the system  
‘On. If necessary press the Function button on the top panel or remote control  
to select the Tuner function.  
The TUNER indicator appears and  
the display changes from time to  
radio frequency. The first time you  
turn your unit ‘On’ the display will  
show FM 87.5 MHz.  
2.) To switch between the FM and AM  
bands press the Band button on  
the top panel or remote control.  
The first time you select the AM  
band the display will show AM 520  
KHz.  
3.) Tune to the desired station with the Tuning/Skip  
panel or the buttons on the remote control as follows:  
Manual Tuning  
Repeatedly press either the Tuning/Skip  
the buttons on the remote control until the display shows the frequency  
or  
buttons on the top  
/
or  
buttons on the top panel or  
/
of the desired station.  
Automatic Tuning  
Depress and hold either the Tuning/Skip  
or  
buttons on the top panel or  
the  
/
buttons on the remote control until the display begins to move and  
then release the buttons. The tuner searches up or down the band for the next  
strong station and then stops. Repeat this process until the tuner stops on the  
desired station.  
20  
iC200_052906.p65  
20  
29/5/2006, 10:29  
4.) If you tuned to an FM Stereo  
station the FM ST. indicator  
appears in the display.  
5.) A few seconds after you release the tuning controls the display changes from  
radio frequency back to the correct time. To see the station frequency again,  
press the Time button on the top panel. The display will change from time to  
radio frequency for a few seconds and then return to the correct time again.  
6.) Adjust the volume to the desired level by pressing the Volume + or buttons  
on the top panel or the remote control. The volume level appears in the display  
when the volume is adjusted.  
The display level ranges “00” (minimum) to “63” (maximum).  
7.) When you are finished listening press the Power button on the top panel or  
the remote control to shut the system ‘Off’. The TUNER indicator goes off.  
NOTE: The Tuner remembers the last station that you were listening to and  
the selected volume level, and automatically returns to the same station and  
volume level when the system is switched ‘On’ again.  
21  
iC200_052906.p65  
21  
29/5/2006, 10:29  
Presetting Stations In The Tuner Memory  
You can store a total of 20 stations, 10 FM and 10AM, in the tuner memory for  
easy recall at any time.  
1.) Using either the Automatic or  
Manual Tuning method described  
above, tune to the first station you  
wish to store in the tuner memory.  
Example: FM 92.5 MHz  
2.) When the desired frequency appears on the display, press the Memory button  
on the top panel once.  
F 1” will begin flashing on the  
display indicating that you can now  
store your station in FM Preset  
Memory #1.  
3.) Press the MEMORY button again.  
The “F 1” stops flashing. This  
indicates that FM 92.5 is now  
stored in FM Preset Memory #1.  
4.) Tune to the next station that you wish to store.  
Press the Memory button once, then press the Preset  
button to select  
Preset Memory #2.  
F 2” begins flashing in the display.  
5.) Press the Memory button again to enter your desired station in Preset Memory  
#2.  
6.) Repeat steps 4 and 5, using the Preset  
or  
buttons to select a different  
preset memory number each time until you have stored up to 10 FM stations in  
the memory.  
22  
iC200_052906.p65  
22  
29/5/2006, 10:29  
7.) Press the Band button to switch to the AM band and repeat the above procedure  
to store up to 10 AM stations in the tuner memory.  
NOTES:  
• The FM memories are numbered “F 1” through “F 10”. The AM memories  
are numbered “A 1” through “A 10”.  
• After you press the Memory button the first time you must select a Preset  
Memory number and press the Memory button again within 10 seconds,  
while the memory number is flashing, or the station will not be memorized.  
Recalling Preset Stations  
Press the Band button to select the desired band.  
Press the Preset  
or  
buttons to scroll through the preset stations one by one.  
Changing Preset Stations  
1.) Tune to the new station that you want to store.  
2.) Press the Memory button and then press the Preset  
or  
buttons to select  
the Memory Number that you wish to change.  
3.) When the desired Preset Memory Number is flashing, press the Memory button  
again. The new station is now stored and the previous station is deleted from  
the memory.  
23  
iC200_052906.p65  
23  
29/5/2006, 10:29  
Antenna Information  
FM: The FM antenna is built in the AC power cord. You may have to extend and  
vary the direction of theAC power cord until you find the position that provides  
the best reception.  
AM: The AM bar antenna is inside the cabinet of the main unit. You may need to  
change the position of the main unit until you find the position that provides  
the best reception for your favorite AM stations.  
24  
iC200_052906.p65  
24  
29/5/2006, 10:29  
Listening To Your “Dockable” iPod® / Charging The Battery  
IMPORTANT!  
To prevent distortion during iPod® playback you should go to the Main  
Menu of your iPod® , select the Settings Menu page, select the EQ Setting,  
and make sure that the EQ function is set to “Off”.  
(Main Menu > Settings Menu > EQ Setting > Select “Off”)  
This system provides an iPod® docking station on the top panel. You can connect  
any “dockable” iPod® , available as of January 2006, to the docking station and  
play your iPod® through the speakers of this system. When your “dockable” iPod®  
is in the docking area, the power to your device is being supplied by this system,  
not by the iPod® ’s internal battery. In addition when your iPod® is switched ‘Off’  
while resting in the dock the internal iPod® battery is automatically recharged.  
NOTE: To prevent any possible interference between the iPod® and the Tuner  
in this system, the iPod® battery circuit is automatically switched ‘Off’ while  
you are listening to the radio. When the radio is ‘Off’ the battery charging  
circuit switches ‘On’ again automatically, regardless of whether the Power  
button of this system is ‘Off’ or ‘On’.  
Follow these steps to connect and listen to your iPod® . We recommend that you  
start with the power to this system switched ‘Off’:  
1.) Open the docking area cover by gently pressing downward on the cover and  
sliding it backward.  
25  
iC200_052906.p65  
25  
29/5/2006, 10:29  
2.) Select the correct adapter for your particular iPod®  
model from among the 5 different adapters included.  
Each adapter is engraved with the name and/or size  
of an iPod® model. Place the selected adapter in the  
docking area so that the iPod® 30-pin connector  
passes through the opening in the adapter.  
Gently press downward on the adapter until it “clicks”  
and locks in place.  
3.) Mount the iPod® Support Bracket on the docking station as shown.  
This bracket provides support and prevents your iPod® from moving too far  
backward when you operate the iPod® controls.  
CAUTION: You must use this support bracket with all iPod® models to  
prevent possible damage to the iPod® connector.  
IMPORTANT iPod® nano INSTRUCTIONS!  
If you are using this system with an iPod® nano you will notice that the iPod®  
30-pin connector on this unit is not properly aligned with the opening in the  
iPod® nano adapter.  
Before inserting the iPod® nano adapter into the docking  
area you must slide the iPod® 30-pin connector to the  
left position, and then place the nano adapter into the  
docking area.  
NOTE: After removing the nano adapter remember  
to slide the 30-pin connector back to the right  
position before attempting to install any other iPod®  
adapter.  
26  
iC200_052906.p65  
26  
29/5/2006, 10:29  
4.) After installing the necessary adapter in the docking area and making sure that  
it is locked in place, mount the support bracket, and then your iPod® into the  
adapter so that the 30-pin connector in the docking area is fully inserted into  
the 30-pin socket on the bottom of your iPod® .  
If necessary set the HOLD switch on your iPod® to the “Off” position.  
5.) Press the Power button on the top panel or remote control to turn this system  
‘On’. Depending on the setting of the Back Light Timer in your iPod® the display  
backlighting may turn ‘On’ and the “Charging” or “Charged” indicator will appear  
in the display.  
6.) Press the Function button on the  
top panel or on the remote control  
to select the iPod function.  
Your iPod® will begin to play. It may begin playback with the first song in your  
library in alphabetical order by song name, or if the iPod® was only shut off for  
short time it may begin playback of the same song that was playing before it  
was shut off.  
NOTE: If the Power of this system is ‘On’ and the iPod function is already  
selected then your iPod® will begin to play as soon as it is connected to the  
dock, as long as the iPod® HOLD switch is ‘Off’. If your iPod® enters the Pause  
mode when you connect it to the dock, press the  
begin playback.  
Play/pause button to  
27  
iC200_052906.p65  
27  
29/5/2006, 10:29  
7.) Once the iPod® is playing you can use the navigation controls on the iPod® to  
select among the menu items as usual. However you can only adjust the  
volume level by using the Volume +/– controls on the top panel or remote  
control of this unit. The click wheel volume control on the iPod® cannot be  
used to control the speaker volume level of this system.  
8.) To skip or search forward or back to the next or previous song you can use  
the Tuning/Skip  
or  
buttons on the top panel or the  
/
buttons on  
the remote control.  
9.) The  
Play/pause buttons on the top panel of this system and the remote  
Play/Pause button on your iPod® .  
control have the same function as the  
Press once to begin playback. Press again to pause playback. Press and  
hold to shut the iPod® ‘Off’.  
10.) When you have finished listening to your iPod® you may press the Function  
button to switch to the TUNER function. Your iPod® will shut off automatically.  
You may also press the Power button to shut this system ‘Off’. Your iPod®  
will shut off and the recharging circuit turns on automatically.  
If you remove your iPod® from the docking connector we suggest that you  
close the docking compartment cover again to keep dust and other foreign  
objects out of the docking area.  
NOTES:  
• If you remove your iPod® from the docking connector during playback the  
power to this system is shut ‘Off’ automatically.  
• If you have a power failure while the iPod® is playing the iPod® power will  
be shut off automatically to preserve the iPod® internal battery.  
28  
iC200_052906.p65  
28  
29/5/2006, 10:29  
Listening To An iPod® Shuffle / Charging The Battery  
We have also provided an Apple USB port in the docking area that allows you to  
connect and play an iPod® Shuffle.  
IMPORTANT!  
The USB connector on this system is designed only for the iPod® Shuffle.  
DO NOT CONNECT ANY OTHER MP3 PLAYERS TO THIS USB CONNECTOR.  
Other MP3 players may be connected to this system only through the Auxiliary  
Input (Aux) jack. This system is not compatible with portable USB storage  
devices that contain compressed MP3 or WMA audio files. Do not connect  
such devices to the USB connector of this system.  
1.) Mount the support bracket in the docking area as shown.  
2.) Remove the protective cap from your iPod® Shuffle and slide the Shuffle power  
switch to either the Normal or Shuffle playback position as usual.  
3.) Connect your iPod® Shuffle to the USB connector in the docking area. The  
Shuffle can only be connected one way, with the controls facing toward you.  
4.) Press the Power button to turn  
this system ‘On’ if necessary and  
press the Function button to  
select the iPod function. The  
iPod” indicator appears in the  
display.  
29  
iC200_052906.p65  
29  
29/5/2006, 10:29  
5.) Set the volume control of this system to a medium – high level. Press the  
VOLUME + button until the volume level display is reading “50”.  
6.) Press  
Play/Pause button on your iPod® Shuffle to begin playback and  
adjust the Volume control on the iPod® until you achieve the desired level. If  
necessary you can go back and make final adjustments to the volume level on  
this system.  
7.) To Pause, Skip Songs, or Stop playback use the controls on the iPod® Shuffle  
as usual. These functions cannot be operated by the controls on the main unit  
or the remote control. When you stop playback and leave the iPod® Shuffle  
connected to the USB connector the battery charging circuit begins recharging  
the iPod® Shuffle battery immediately.  
8.) When you are finished listening or charging your iPod® Shuffle remove it from  
the USB connector, switch the iPod® Shuffle ‘Off’ and replace the protective  
cap. Press the Power button on the main unit to shut the system ‘Off’.  
30  
iC200_052906.p65  
30  
29/5/2006, 10:29  
Alarm Operation  
The dual alarms in this system give you the option of waking to the radio, an  
electronic buzzer tone, or even to your iPod® .  
NOTE: You cannot wake to the iPod® Shuffle.  
You may also program one or both of the alarms for weekdays only, weekends  
only, or everyday operation.  
Before activating the alarms first check the settings for Alarm 1 and Alarm 2 and  
adjust if necessary.  
Refer to “Adjusting The Wake Up Times” and “Selecting The Alarm Mode” on  
pages 17 and 18.  
Wake To Radio  
1.) Tune to the station that you want to wake you up, adjust the Volume control to  
the desired level, and then shut the system ‘Off’.  
2.) Slide the Alarm 1 and/or Alarm 2 selector switches, located on the left side  
panel to the “Radio” position.  
The AL 1 and/or AL 2 indicators will appear in the main display to confirm that  
the alarms are ‘On’.  
3.) At the selected wake-up time the  
radio will turn on to the selected  
station. It will play for one hour and  
then shut off automatically and  
reset itself for the following day.  
To shut the radio off sooner you can press either the Power button or the  
appropriate Alarm 1 or Alarm 2 button on the top panel.  
31  
iC200_052906.p65  
31  
29/5/2006, 10:29  
Wake To Buzzer  
Note: Alarm 1 and Alarm 2 have different buzzer sounds.  
Alarm 1 is a “single beep” sound.  
Alarm 2 is a “double beep” sound.  
You will be able to tell which alarm is going off by the sound that it makes.  
1.) Slide the Alarm 1 and/or Alarm 2 selector switches, located on the left side  
panel to the “Buzzer” position.  
The AL 1 and/or AL 2 indicators will appear in the main display to confirm that  
the alarms are ‘On’.  
2.) At the selected wake up time the electronic buzzer tone alarm will come on.  
The buzzer sound will continue for one hour and then shut off automatically  
and reset itself for the following day.  
To shut the buzzer off sooner you can press either the Power button or the  
appropriate Alarm 1 or Alarm 2 button on the top panel.  
32  
iC200_052906.p65  
32  
29/5/2006, 10:29  
Wake To Your iPod®  
NOTE: You can only wake to the “Dockable” iPod® . You cannot wake to the  
iPod® Shuffle.  
1.) Connect your iPod® to the docking station as usual, start playback, select the  
song that you would like to play at the wake up time and the desired volume  
level, then press the Power button to shut the system ‘Off’.  
2.) Slide the Alarm 1 and/or  
Alarm 2 selector switches,  
located on the left side panel  
to the iPod position.  
The AL 1 and/or AL 2 indicators will appear in the main display to confirm that  
the alarms are ‘On’.  
3.) At the selected wake up time the system will turn on in the iPod® mode to the  
song you selected.  
NOTE: If you selected the song from the iPod® Songs menu, playback will  
stop when that song ends. If you selected the song from within the iPod®  
Album menu, playback will continue for one hour or until the end of that  
Album, whichever comes first.  
4.) To stop the iPod® alarm sooner press the Power button or the appropriate  
Alarm 1 or Alarm 2 buttons on the top panel.  
NOTES:  
• If you selected the “Wake To iPod® option but there is no iPod® connected  
to the docking station at the wake up time, the alarm automatically defaults  
to the “Wake To Buzzer” option.  
• You cannot wake to an iPod® Shuffle because the Shuffle has no interface  
to receive the alarm signal from this system. If you selected the “Wake To  
iPod® option but you are using an iPod® Shuffle, the alarm will automatically  
default to the “Wake To Buzzer” mode.  
33  
iC200_052906.p65  
33  
29/5/2006, 10:29  
To Cancel The Alarms  
To cancel the alarm completely so they do not come on at all, slide the appropriate  
Alarm 1 and/or Alarm 2 selector switches to their “Off”positions.  
34  
iC200_052906.p65  
34  
29/5/2006, 10:29  
SNOOZE Alarm / “TOUCHLESS” SNOOZE  
When the alarms turn on in the morning you can activate the SNOOZE control to  
catch a few minutes extra sleep. The Snooze function stops the alarm for 9 minutes  
and then turns the alarm ‘On’ again.  
There are three ways to activate the Snooze control:  
By touching the SNOOZE button on the top panel or the remote control, or by  
placing your hand in front of the TOUCHLESS SNOOZE SENSOR on the front  
panel.  
When the Snooze function has been  
activated the appropriate AL 1 or AL 2  
indicator flashes in the display.  
NOTE: The Snooze Sensor detects the difference in temperature between  
you hand and the ambient room temperature and it is quite accurate.  
However in the unusual condition where there is almost no difference between  
your hand temperature and the room temperature the touchless snooze function  
may not operate. In this case please press the SNOOZE button on the top  
panel or the remote control.  
35  
iC200_052906.p65  
35  
29/5/2006, 10:29  
Sleep Timer  
The Sleep Timer allows you to operate the radio or iPod® for up to 99 minutes  
while you are falling asleep and then shuts the power off automatically.  
1.) Turn the system ‘On’ and operate the radio or iPod® as usual.  
Adjust the Volume control to the desired level for falling asleep, but remember  
that the level you set for falling asleep is that same level that you will hear in the  
morning if you are waking to radio or iPod® .  
2.) Press the Sleep button on the top panel.  
The display will briefly show “L:30”  
and the SLP (Sleep) indicator will  
appear.  
The radio or iPod® will operate for  
30 minutes and then shut off  
automatically.  
3.) To change the amount of Sleep time depress and hold the Sleep button and  
press the Tuning/Skip  
or  
buttons on the top panel or the  
/
buttons  
on the remote control to decrease or increase the amount of sleep time from  
01” minutes to “99” minutes.  
NOTE: When you change the Sleep timer from the original 30-minute default  
setting your new setting becomes the new default setting.  
For example if you change the Sleep timer setting from 30 minutes to 45  
minutes, 45 minutes becomes the new default Sleep timer setting until you  
change it again.  
4.) When the Sleep timer counts down to “00” the power shuts off automatically.  
NOTE: If you set the Sleep timer for 60 minutes in the iPod mode, make  
sure you have selected an Album or a Playlist that is at least 60 minutes  
long. Otherwise the iPod® will stop at the end of your selected Album or  
Playlist, but the system Power will remain ‘On’ until the Sleep timer counts  
down to “00”.  
36  
iC200_052906.p65  
36  
29/5/2006, 10:29  
Nap Timer (Buzzer Alarm Only)  
The Nap timer function will wake you to the buzzer alarm after a nap of up to 99  
minutes without the need to change your regular Alarm 1 or Alarm 2 settings.  
1.) If the system is playing, shut the power ‘Off’.  
2.) Press the Nap button on the top panel.  
The display will briefly show “n:30”  
and the NAP indicator appears.  
After 30 minutes the buzzer alarm  
will turn on to wake you up.  
3.) To change the amount of nap time depress and hold the Nap button and press  
the Tuning/Skip  
or  
buttons on the top panel or the  
/
buttons on  
the remote control to decrease or increase the amount of naptime from 2  
minutes to 99 minutes.  
NOTE: When you change the Nap timer from the original 30-minute default  
setting your new setting becomes the new default setting.  
For example if you change the Nap timer setting from 30 minutes to 45  
minutes, 45 minutes becomes the new default Nap timer setting until you  
change it again.  
To cancel Nap Timer, press the SNOOZE button.  
Dimmer Control  
The display dimmer control was set to the High position at our factory.  
If you find the display to be too bright for sleeping, slide the Dimmer switch to the  
Low position.  
37  
iC200_052906.p65  
37  
29/5/2006, 10:29  
Auxiliary Input Jack  
This system includes an Auxiliary Input Jack on the back panel so that you can  
connect older non-dockable iPods® , other MP3 players, or personal CD players,  
and listen to them through the speakers of this system. Use a mini stereo connection  
cable, not included, to connect the headphone jack of your external unit to the Aux  
In jack on the back panel of this system.  
Press the Function button on the top panel or  
remote control of this system to select the AUX  
function. The AUX indicator appears in the  
display.  
Set the Volume level control on this system to a medium level (approximately “30”  
on the volume level display).  
Operate your external device as usual. Make final adjustments to the volume  
controls of this system and to your external device to achieve the desired level.  
Keep in mind that if the volume level of this system is set too low and the volume  
level of your external device is set too high the sound may be distorted. You need  
to experiment with both volume controls to find the most desirable volume level  
settings.  
Mute Control (Remote Control Only)  
If you need to shut off the speakers of this system temporarily press the Mute  
button on the remote control.  
The sound stops and the MUTE indicator  
appears in the display.  
To cancel the Mute function and restore the sound, press the Mute button again  
or press the Volume + or – buttons. The MUTE indicator disappears.  
38  
iC200_052906.p65  
38  
29/5/2006, 10:29  
Phones (Stereo Headphone) Jack  
This system includes a stereo headphone jack for private listening without disturbing  
others. The Phones jack is located on the back panel. The built in speakers  
automatically shut off when headphones are connected to the Phones jack.  
IMPORTANT: Before connecting your headphones, set the Volume control to  
a low level. Then connect your headphones, put them on and gradually increase  
the volume to a comfortable listening level.  
Remember that music files can often contain very loud passages as well as  
softer passages. It is a good idea to adjust the listening level during a louder  
passage so that you are not surprised by a sudden, uncomfortable increase in  
the headphone sound.  
39  
iC200_052906.p65  
39  
29/5/2006, 10:29  
Changing The Lithium Battery  
Like all batteries, eventually the built in lithium battery will need to be replaced. A  
number of factors, such as, the length of time between the date the radio was  
manufactured and the date you plugged it in for the first time determine the amount  
of time before replacement.  
During this initial storage period, the lithium battery is supplying power to the  
SmartSet® computer memory. Once you plug the radio in, your household outlet  
supplies the power, and the battery is not being used.  
A fresh lithium battery can supply power to the SmartSet® computer for at least 3  
years even if it is never connected to an AC power supply. If your radio was  
connected to your AC supply within a few months after it was manufactured, and  
you experience only the normal, nuisance type, short duration power interruptions,  
your battery may last for up to 5 years or even longer.  
When the battery power drops below a certain level, the “  
” indicator will  
‘flash’. When you see this indicator, you should change the battery as soon as it is  
convenient for you to do so. To change the battery proceed as follows:  
1.) Purchase a replacement 3V lithium battery wherever batteries are sold. The  
battery type is CR2430 or equivalent.  
2.) Remove the battery from its package so it is ready to install.  
IMPORTANT: Leave the radio power cord connected to your AC outlet.  
This will provide power to the SmartSet® computer memory while the  
original lithium battery is removed.  
3.) Turn the radio face up and use a small screwdriver to remove the screw securing  
the battery holder to the cabinet.  
BE CAREFUL NOT TO LOSE THIS SMALL SCREW!  
40  
iC200_052906.p65  
40  
29/5/2006, 10:29  
4.) Remove the original battery from the holder and insert the new battery into the  
holder the same way, observing the positive (+) direction.  
Slide the holder with the new battery back into the slot in the cabinet.  
5.) Replace the screw that secures the battery holder in the cabinet.  
6.) Turn the radio right side up and confirm that the “  
‘Off’.  
” indicator goes  
7.) Save these instructions. You’ll have to do this again five to eight years from  
now!  
41  
iC200_052906.p65  
41  
29/5/2006, 10:29  
Resetting The Clock After A Total Memory Loss  
If you do not change the built in lithium battery within a reasonable period of time  
after you see the flashing “  
” warning indicator, the lithium battery may  
become exhausted and will no longer be able to supply back up power to the  
SmartSet® internal computer.  
If the unit is disconnected from the AC outlet after the battery is exhausted, or if a  
power interruption occurs, the SmartSet® memory will be lost and the clock will  
need to be reset when the power is restored. Be sure to install a fresh lithium  
battery before you reset the clock, otherwise the clock will need to be reset each  
time the power is interrupted.  
If the lithium battery is exhausted and you experience an interruption in the AC  
power supply, the clock will reset itself to its initial default setting when the power is  
restored.  
The initial default setting is “AM 12:00, Saturday, January 1st (1. 01), 2005”.  
If you notice that the time on your SmartSet® clock radio is completely incorrect,  
and the day indicator is also wrong, press the Month/date button to see the date.  
If the date display is showing “1. 01”  
(January 1st), you probably  
experienced a total memory loss.  
To reset the clock after a total memory loss, proceed as follows:  
1.) Follow the instructions on pages 40-41 and install a new CR2430 lithium battery  
in the battery compartment.  
2.) Connect the radio to your AC outlet and let the clock set itself.  
3.) Depress the Month/date and Time buttons together. The display will change  
from ‘Time’ to ‘Year’.  
While holding the Month/date and Time buttons, press the Tuning/Skip  
button to set the display to the correct year if necessary, then release the  
buttons.  
42  
iC200_052906.p65  
42  
29/5/2006, 10:29  
4.) Depress the Month/date button. The display will change from ‘time’ to ‘month/  
date’ (mm/dd).  
While holding the Month/date button, press the Tuning/Skip  
button to set  
the display to the correct Month and Date. The Day indicator will change  
automatically as you adjust the month/date settings. When the correct Month  
and Date appear on the display, release the buttons.  
5.) Depress the Time button and the Tuning/Skip  
button to set the display to  
the correct Time. Be sure to confirm that you have set the time correctly to  
‘AM’ or ‘PM’ by observing the AM indicator.  
6.) After you set the time, reconfirm that the Day, and Month/Date displays are still  
correct. Make final adjustments if necessary.  
The SmartSet® clock memory is now reset and the new lithium battery will maintain  
it for the next 5 to 8 years, depending on the number and duration of the power  
outages you experience.  
IMPORTANT NOTE:  
After resetting the clock, don’t forget to reset your wake up times, and alarm  
mode settings, and sleep timer settings as well.  
43  
iC200_052906.p65  
43  
29/5/2006, 10:29  
CARE AND MAINTENANCE  
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes  
smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow  
water or any liquid to get inside the cabinet.  
Never use any abrasive cleaners or cleaning pads as these will damage  
the finish of your unit.  
Lithium Battery Precautions  
• Dispose of the old battery properly. Do not leave it lying around where a young  
child or pet could play with, or swallow it. If the battery is swallowed, contact a  
physician immediately.  
• Battery may explode if mistreated. Do not attempt to recharge it or disassemble  
it. Do not dispose of the old battery in a fire.  
TO FIND THE LOCATION AND PHONE  
NUMBER OF YOUR NEAREST SERVICE  
CENTER PERMITTED TO PERFORM  
WARRANTY...  
SERVICE  
CALL TOLL FREE: 1-800-695-0098  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE  
PLEASE CALL:  
1-800-898-9020  
FOR CUSTOMER SERVICE,PLEASE WRITE TO:  
Emerson Radio Corp.,  
Consumer Affairs Dept.,  
5101 Statesman Drive,  
Irving, TX 75063.  
44  
iC200_052906.p65  
44  
29/5/2006, 10:29  
LIMITED WARRANTY  
Emerson Radio Corp. warrants manufacturing defects in original material, including  
original parts and workmanship, under normal use and conditions, for a period of  
ninety (90) days from the date of original purchase in the U.S. With your dated  
proof of purchase, we will provide repair service at no charge for labor and parts at  
an authorized Depot Repair Facility, or replace the product in our discretion. For  
repair or replacement, pack your unit in a padded box, enclose your check or  
money order payable to Emerson Radio Corp. in the amount of $9.00 (not required  
by California residents) to cover shipping and handling costs, and enclose a copy  
of your proof of purchase. Send your unit to:  
Emerson Radio Corp.,  
5101 Statesman Drive,  
Irving, TX 75063.  
This warranty does not cover damage from negligence, misuse, abuse, accident,  
failure to follow operating instructions, commercial use, rental, repairs by an  
unauthorized facility, or products purchased, used, serviced or damaged outside  
of the United States.  
THIS WARRANTYGIVES YOU SPECIFIC LEGAL RIGHTS, ANDYOU MAY  
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
AU898M  
The Serial Number can be found on the back cabinet. We suggest that you record  
the Serial Number of your unit in the space below for future reference.  
Model Number: iC200 / iC200BK  
Serial Number:  
45  
iC200_052906.p65  
45  
29/5/2006, 10:29  
EMERSON  
Part No.16-3008  
605-03  
Printed in China  
iC200_052906.p65  
46  
29/5/2006, 10:29  

Nokia 3155i User Manual
Motorola MOTORAZR V3r User Manual
Meyer Sound RMS 43 User Manual
Magnat Audio MC 1 User Manual
JVC KD AR200 User Manual
Hitachi Travelstar HTS723232L9A360 User Manual
Hitachi Travelstar HTS723232A7A364 User Manual
Bunn Coffeemaker CWTF153T User Manual
Bunn Coffeemaker CDBCF TC User Manual
Atlantis Land DISKMASTER NASF301D User Manual