Sony CCD TRV 64 E User Manual

3-859-616-71 (1)  
Vid e o Ca m e ra  
Re co rd e r  
Operating Instructions  
Before operating the unit, please read this manual thoroughly,  
and retain it for future reference.  
CCD-TRV64E  
©1997 by Sony Corporation  
Ta b le o f co n t e n t s  
Be fo re yo u b e g in  
Ad d it io n a l in fo rm a t io n  
Using this manual ................................... 4  
Checking supplied accessories .............. 5  
Changing the lithium battery in the  
camcorder ........................................ 51  
Resetting the date and time ................. 53  
Usable cassettes and playback modes  
........................................................... 54  
Tips for using the battery pack ........... 55  
Ge t t in g st a rt e d  
Charging and installing the battery  
pack .................................................... 6  
Inserting a cassette .................................. 9  
Maintenance information and  
precautions ...................................... 58  
Using your camcorder abroad ............ 63  
Trouble check ........................................ 64  
Self-diagnosis function .................. 68  
Specifications ......................................... 69  
Identifying the parts ............................. 70  
Warning indicators ............................... 77  
Index ....................................................... 78  
Ba sic o p e ra t io n s  
Camera recording ................................. 10  
Using the zoom feature ................. 13  
Selecting the START/ STOP mode  
.................................................... 14  
Shooting with the LCD screen ...... 15  
Letting the subject monitor the shot ... 16  
Hints for better shooting ...................... 17  
Checking the recorded picture ............ 19  
Playing back a tape ............................... 20  
Searching for the end of the picture ... 23  
Ad va n ce d o p e ra t io n s  
Using alternative power sources ........ 24  
Using the mains .............................. 24  
Changing the mode settings ................ 26  
Fade-in and fade-out ............................ 30  
Using the wide mode function ............ 31  
Enjoying picture effect ......................... 33  
Focusing manually ................................ 35  
Using the PROGRAM AE function .... 37  
Shooting with backlighting ................. 39  
Adjusting the exposure ........................ 40  
Releasing the STEADY SHOT function  
........................................................... 41  
Superimposing a title ........................... 42  
Making your own titles ........................ 44  
Recording with the date/ time ............ 45  
Optimizing the recording condition .. 46  
Watching on a TV screen ..................... 47  
Editing onto another tape .................... 48  
Recording from a VCR or TV .............. 50  
3
Be fo re yo u b e g in  
Usin g t h is m a n u a l  
As you read through this manual, buttons and settings on the camcorder are shown in  
capital letters.  
e.g. Set the POWER switch to CAMERA.  
As indicated with in the illustrations, you can hear the beep sound to confirm your  
operation.  
No t e o n TV co lo u r syst e m s  
TV colour systems differ from country to country. To view your recordings on a TV,  
you need a PAL system-based TV.  
Pre ca u t io n o n co p yrig h t  
Television programmes, films, video tapes, and other materials may be copyrighted.  
Unauthorized recording of such materials may be contrary to the provision of the  
copyright laws.  
Pre ca u t io n s o n ca m co rd e r ca re  
The LCD screen and/or the colour view finder are manufactured using high-  
precision technology. How ever, there may be some tiny black points and/or  
bright points (red, blue or green in colour) that constantly appear on the LCD  
screen and/or in the view finder. These points are normal in the manufacturing  
process and do not affect the recorded picture in any w ay. Over 99.99% are  
operational for effective use.  
Do not let the camcorder get wet. Keep the camcorder away from rain and sea water.  
Letting the camcorder get wet may cause the unit to malfunction, and sometimes this  
malfunction cannot be repaired [a].  
Never leave the camcorder exposed to temperatures above 60°C (140°F ), such as in a  
car parked in the sun or under direct sunlight [b].  
[a]  
[b]  
Contents of the recording cannot be compensated if recording or playback is not  
made due to a malfunction of the camcorder, video tape, etc.  
4
Ch e ckin g su p p lie d a cce sso rie s  
Check that the following accessories are supplied with your camcorder.  
1
2
3
4
5
6
7
1 Wireless Remote Commander (1)  
5 R6 (size AA) battery for Remote  
(p. 74)  
Commander (2) (p. 74)  
2 AC-V316 AC pow er adaptor (1)  
6 A/V connecting cable (1) (p. 47,50)  
(p. 6,24)  
7 Shoulder strap (1) (p. 75)  
3 NP-F530 Battery pack (1) (p. 6,24)  
4 CR2025 Lithium Battery (1) (p. 51)  
The lithium battery is already installed  
in your camcorder.  
5
Ge t t in g st a rt e d  
Ch a rg in g a n d in st a llin g t h e b a t t e ry p a ck  
Before using your camcorder, you first need to charge and install the battery pack. To  
charge the battery pack, use the supplied AC power adaptor.  
This camcorder operates with the “InfoLITHIUM“ battery. If you use any other battery  
to operate your camcorder, the camcorder may not operate or the battery life may be  
shortened.  
“InfoLITHIUM“ is a trademark of Sony Corporation.  
Ch a rg in g t h e b a t t e ry p a ck  
Charge the battery pack on a flat surface without vibration.  
(1) Connect the mains lead to mains.  
(2) Align the surface of the battery pack indicated by the z mark with the edge of  
the terminal shutter of the AC power adaptor. Then fit and slide the battery  
pack in the direction of the arrow. The CHARGE lamp (orange) lights up.  
Charging begins.  
When the CHARGE lamp goes out, normal charge is completed. For full charge, which  
allows you to use the battery longer than usual, leave the battery pack in place for  
approximately one hour. Unplug the unit from the mains, then remove the battery pack  
and install it into the camcorder. You can also use the battery pack before it is  
completely charged.  
1
2
Ch a rg in g t im e  
Battery pack  
NP-F530 (supplied)  
170 (110)  
NP-F730  
NP-F930  
Charging time* (min.)  
250 (190)  
330 (270)  
The time required for a normal charge is indicated in parentheses.  
* Approximate minutes to charge an empty battery pack using the supplied AC power  
adaptor. (Lower temperatures require a longer charging time.)  
6
Ch a rg in g a n d in st a llin g t h e b a t t e ry p a ck  
Ba t t e ry life  
Upper numbers are the time when recording with the viewfinder. Lower numbers are  
the time when recording with the LCD screen. Using both will further reduce recording  
time.  
Battery pack  
NP-F530 (supplied)  
NP-F730  
NP-F930  
150 (135)  
110 (100)  
305 (275)  
255 (230)  
480 (435)  
400 (360)  
Continuous recording time*  
85 (75)  
60 (55)  
175 (155)  
145 (130)  
275 (250)  
230 (205)  
Typical recording time**  
Playing time on LCD  
110 (100)  
255 (230)  
400 (360)  
Numbers in parentheses indicate the time when you use a normally charged battery.  
Battery life will be shorter if you use the camcorder in a cold environment.  
*
Approximate continuous recording time indoors.  
** Approximate minutes when recording while you repeat recording start/ stop,  
zooming and turning the power on/ off. The actual battery life may be shorter.  
Notes on remaining battery time indication during recording  
Remaining battery time is displayed in the viewfinder or on the LCD screen.  
However, the indication may not be displayed properly, depending on using  
conditions and circumstances.  
When you close the LCD panel and open it again, it takes about 1 minute for the  
correct remaining time to be displayed.  
To re m o ve t h e b a t t e ry p a ck  
Slide the battery pack in the direction of the arrow.  
Notes on charging the battery pack  
The CHARGE lamp will remain lit for a while even if the battery pack is removed  
and the mains lead is unplugged after charging the battery pack. This is normal.  
If the CHARGE lamp does not light, disconnect the mains lead. After about one  
minute, reconnect the mains lead again.  
You cannot operate the camcorder using the AC power adaptor while charging the  
battery pack.  
When a fully charged battery pack is installed, the CHARGE lamp will light once,  
then go out.  
7
Ch a rg in g a n d in st a llin g t h e b a t t e ry p a ck  
In st a llin g t h e b a t t e ry p a ck  
Align the grooves of the battery pack with the receptacles of the camcorder and slide  
the battery pack down until it catches on the battery release lever and clicks.  
Attach the battery pack to the camcorder securely.  
Note on installing the NP-F930 battery pack  
Use the camcorder while lifting up the viewfinder slightly.  
Note on the battery pack  
Do not carry the camcorder by grasping the battery pack.  
To re m o ve t h e b a t t e ry p a ck  
While pressing BATT RELEASE (PUSH), slide the battery pack in the direction of the  
arrow.  
BATT RELEASE  
(PUSH)  
You can look at the demonstration of the functions available with this camcorder (p. 28).  
8
In se rt in g a ca sse t t e  
Make sure that the power source is installed. When you want to record in the Hi8  
system, use Hi8 video cassette H.  
(1) While pressing the small blue button on the EJECT switch, slide it in the  
direction of the arrow. The cassette compartment automatically lifts up and  
opens.  
(2) Insert a cassette with the window facing out.  
(3) Close the cassette compartment by pressing the “PUSH” mark on the cassette  
compartment. The cassette compartment automatically goes down.  
1
2
3
PUSH  
To e je ct t h e ca sse t t e  
While pressing the small blue button on the EJECT switch, slide it in the direction of the  
arrow.  
To p re ve n t a ccid e n t a l e ra su re  
Slide the tab on the cassette to expose the red mark. If you insert the cassette with the  
red mark exposed and close the cassette compartment, the beeps sound for a while. If  
you try to record with the red mark exposed, the  
cannot record.  
and 6 indicators flash, and you  
To re-record on this tape, slide the tab back out covering the red mark.  
9
Ba sic o p e ra t io n s  
Ca m e ra re co rd in g  
Make sure that the power source is installed and a cassette is inserted and that the  
START/ STOP MODE switch inside the LCD panel is set to  
. Before you record one-  
time events, you may want to make a trial recording to make sure that the camcorder is  
working correctly.  
When you use the camcorder for the first time, power on it and reset the date and time  
to your time before you start recording (p. 53).  
The date is automatically recorded for 10 seconds after you start recording (AUTO  
DATE feature).  
(1) While pressing the small green button on the POWER switch, set it to  
CAMERA.  
(2) Turn STANDBY up to STANDBY.  
(3) Press START/ STOP. The camcorder starts recording. The “REC” indicator  
appears and the red lamp lights up in the viewfinder. The camera recording/  
battery lamp located on the front of the camcorder also lights up.  
You can also select Recording mode, SP (standard mode) or LP (long play) mode.  
Set REC MODE in the menu system according to the length of your planned recording  
before you start.  
1
POWER  
CAMERA  
OFF  
2
VTR  
K
S P  
H
STBY  
0:00:00  
40 min.  
AUTO DATE  
START/STOP  
3
REC  
0:00:01  
K
40 min.  
START/STOP  
10  
Ca m e ra re co rd in g  
To st o p re co rd in g m o m e n t a rily [a ]  
Press START/ STOP again. The “STBY” indicator appears in the viewfinder (Standby  
mode).  
To fin ish re co rd in g [b ]  
Press START/ STOP again. Turn STANDBY down to LOCK and set the POWER switch  
to OFF. Then, eject the cassette and remove the battery pack.  
[a]  
[b]  
K
K
STBY  
0:35:20  
K
START/STOP  
START/STOP  
START/STOP  
To fo cu s t h e vie w fin d e r le n s  
If you cannot see the indicators in the viewfinder clearly, or after someone else has used  
the camcorder, focus the viewfinder lens. Turn the viewfinder lens adjustment ring so  
that the indicators in the viewfinder come into sharp focus.  
Note on Standby mode  
If you leave the camcorder in Standby mode for 5 minutes while the cassette is inserted,  
the camcorder turns off automatically. This prevents wearing down the battery and  
wearing out the tape. To resume Standby mode, turn STANDBY down and up again.  
To start recording, press START/ STOP.  
11  
Ca m e ra re co rd in g  
Notes on recording mode  
This camcorder records and plays back in SP (standard play) mode and in LP (long  
play) mode. The playback quality in LP mode, however, will not be as good as that in  
SP mode.  
When a tape recorded on this camcorder in LP mode is played back on other types of  
8mm camcorders or VCRs, the playback quality may not be as good as that on this  
camcorder.  
Note on recording  
When you record from the beginning of a tape, run the tape for about 15 seconds before  
starting the actual recording. This will ensure that you wont miss any start-up scenes  
when you play back the tape.  
Notes on the tape counter  
The tape counter indicates the recording or playback time. Use it as a guide. There  
will be a time lag of several seconds from the actual time. To set the counter to zero,  
press COUNTER RESET.  
If the tape is recorded in SP and LP modes mixed, the tape counter shows incorrect  
recording time. When you intend to edit the tape using the tape counter as a guide,  
record in same (SP or LP) mode.  
Note on the beep sound  
As indicated with in the illustration, a beep sounds when you turn the power on or  
when you start recording, and two beeps sound when you stop recording, confirming  
the operation. Several beeps also sound as a warning of any unusual condition of the  
camcorder.  
Note that the beep sound is not recorded on the tape. If you do not want to hear the  
beep sound, select “OFF” in the menu system.  
Note on the AUTO DATE feature  
The clock is set at the factory to Sydney time for Australia and New Zealand models, to  
Tokyo time for the models sold in Japan, and to Hong Kong time for other models. You  
can reset the clock in the menu system. You can change the AUTO DATE settings by  
selecting ON or OFF in the menu system. The AUTO DATE feature shows the date  
automatically once a day.  
However, the date may automatically appear more than once a day when:  
– you reset the date and time.  
– you eject and insert the tape again.  
– you stop recording within 10 seconds.  
– you set AUTO DATE to OFF once and set it to ON again in the menu system.  
When moving from indoors to outdoors (or vice versa)  
Turn STANDBY up and point the camcorder at a white object for about 15 seconds so  
that the white balance is properly adjusted.  
12  
Ca m e ra re co rd in g  
Usin g t h e zo o m fe a t u re  
Zooming is a recording technique that lets you change the size of the subject in the  
scene.  
For more professional-looking recordings, use the zoom function sparingly.  
“T” side: for telephoto (subject appears closer)  
“W” side:for wide-angle (subject appears farther away)  
W
W
T
T
W
T
Zo o m in g sp e e d (Va ria b le sp e e d zo o m in g )  
Move the power zoom lever a little for a slower zoom, move it further for a faster zoom.  
When you shoot a subject using a telephoto zoom  
If you cannot get a sharp focus while in extreme telephoto zoom, move the power zoom  
lever to the “W” side until the focus is sharp. You can shoot a subject that is at least  
about 80 cm (about 2 5/ 8 feet) away from the lens surface in the telephoto position, or  
about 1 cm (about 1/ 2 inch) away in the wide-angle position.  
Notes on digital zoom  
More than 15x zoom is performed digitally, and the picture quality deteriorates as  
you go toward the “T” side. If you do not want to use the digital zoom, set the D  
ZOOM function to OFF in the menu system.  
The right side [a ] of the power zoom indicator shows the digital zooming zone, and  
the left side [b ] shows the optical zooming zone. If you set the D ZOOM function to  
OFF, the [a ] zone disappears.  
W
T
W
T
[b] [a]  
13  
Ca m e ra re co rd in g  
Se le ct in g t h e START/STOP m o d e  
Your camcorder has two modes besides normal start/ stop mode. These modes enable  
you to take a series of quick shots resulting in a lively video.  
(1) While pressing OPEN, open the LCD panel.  
(2) Set START/ STOP MODE to the desired mode.  
: Recording starts when you press START/ STOP, and stops when you  
press it again (normal mode).  
ANTI GROUND SHOOTING  
: The camcorder records only while you  
press down START/ STOP so that you can avoid recording unnecessary scenes.  
5SEC: When you press START/ STOP, the camcorder records for 5 seconds and  
then stops automatically.  
(3) Turn STANDBY up to STANDBY and press START/ STOP. Recording starts.  
If you selected 5SEC, the remaining tape indicator disappears and five dots appear. The  
dots disappear at a rate of one per second as illustrated below.  
K
K
START/STOP  
MODE  
3
2
1
ANTI GROUND  
SHOOTING  
5SEC  
START/STOP  
START/STOP  
REC  
REC  
STBY  
0:00:00  
• • • • •  
To e xt e n d t h e re co rd in g t im e in 5SEC m o d e  
Press START/ STOP again before all the dots disappear. Recording continues for about  
5 seconds from the moment you press START/ STOP.  
Notes on START/STOP mode  
If you have turned off the indicators on the LCD screen, the dots do not appear.  
You cannot use FADER in 5SEC or mode.  
14  
Ca m e ra re co rd in g  
Sh o o t in g w it h t h e LCD scre e n  
You can also record the picture while looking at the LCD screen.  
When using the LCD screen, the viewfinder turns off automatically. You cannot  
monitor the sound from the speaker during recording.  
(1) While pressing OPEN, open the LCD panel.  
(2) Adjust the angle of the LCD panel.  
The LCD panel moves about 90 degrees to this side and about 210 degrees to  
the other side.  
To adjust the brightness of the LCD screen, press LCD BRIGHT.  
+ side: to brighten the LCD screen  
– side: to dim the LCD screen  
The battery life is longer when the LCD panel is closed. Use the viewfinder instead of  
the LCD screen to save the battery power.  
2
1
210°  
LCD  
BRIGHT  
1
2
90°  
90°  
Ba cklig h t in g t h e LCD scre e n  
If the LCD screen is insufficiently illuminated even after adjusting LCD BRIGHT, select  
LCD B. L. in the menu system and set to BRIGHT. You can select LCD B. L. only while  
using the battery pack as a power source.  
Notes on the LCD panel  
When closing the LCD panel, turn it vertically until it clicks [a ].  
When turning the LCD panel, turn it always vertically; otherwise, the camcorder  
body may be damaged or the LCD panel may not close properly [b ].  
Close the LCD panel completely when not in use.  
[a]  
[b]  
1
2
15  
Le t t in g t h e su b je ct m o n it o r t h e sh o t  
You can turn the LCD panel over so that it faces the other way and you can let the  
subject monitor the shot while shooting with the viewfinder.  
Turn the LCD panel vertically first until it clicks, then turn it over. The  
appears on the LCD screen (Mirror mode) and the date and remaining tape indicators  
disappear.  
indicator  
2
1
To Ca n ce l Mirro r Mo d e  
Turn the LCD panel back toward the viewfinder.  
Notes on mirror mode  
When you turn the LCD panel about 135 degrees to 210 degrees, the camcorder  
enters mirror mode.  
Using the mirror mode, you can record yourself while watching yourself on the LCD  
[a ].  
The picture on the LCD looks as a mirror-image while recording in mirror mode [b ].  
The STBY indicator appears as rP and REC as r. The other indicators may not  
appear in mirror mode.  
While recording in mirror mode, you cannot operate the following buttons: TITLE,  
DATE, TIME and MENU.  
The date appears in reverse when the AUTO DATE feature is turned on. When  
recorded it will be normal.  
[a]  
[b]  
16  
Hin t s fo r b e t t e r sh o o t in g  
For hand-held shots, youll get better results by holding the camcorder according to the  
following suggestions:  
Hold the camcorder firmly and secure it with the grip strap so that you can easily  
manipulate the controls with your thumb.  
1
2
3
Place your right elbow against your side.  
Place your left hand under the camcorder to support it. Be sure to not touch the  
built-in microphone.  
Place your eye firmly against the viewfinder eyecup.  
Use the viewfinder frame as a guide to determine the horizontal plane.  
You can also record in a low position to get an interesting angle. Lift the viewfinder  
up for recording from a low position [a ].  
You can also record in a low position or even in a high position using the LCD panel  
[b ].  
When you use the LCD screen outdoors in direct sunlight, the LCD screen may be  
difficult to see. If this happens, we recommend that you use the viewfinder.  
[b]  
[a]  
Place the camcorder on a flat surface or use a tripod  
Try placing the camcorder on a table top or any other flat surface of suitable height. If  
you have a tripod for a still camera, you can also use it with the camcorder.  
When attaching a non-Sony tripod, make sure that the length of the tripod screw is less  
than 6.5 mm (9/ 32 inch). Otherwise, you cannot attach the tripod securely and the  
screw may damage the camcorder.  
17  
Hin t s fo r b e t t e r sh o o t in g  
Cautions on the view finder and the LCD  
Do not pick up the camcorder by the viewfinder or by the LCD panel [c].  
Do not place the camcorder so as to point the viewfinder or the LCD screen toward  
the sun. The inside of the viewfinder may be damaged. Be careful when placing the  
camcorder under sunlight or by a window [d ].  
[d]  
[c]  
18  
Ch e ckin g t h e re co rd e d p ict u re  
Using EDITSEARCH, you can review the last recorded scene or check the recorded  
picture in the viewfinder or on the LCD screen.  
(1) While pressing the small green button on the POWER switch, set it to  
CAMERA.  
(2) Turn STANDBY up to STANDBY.  
(3) Press the – (Œ) side of EDITSEARCH momentarily; the last few seconds of the  
recorded portion play back (Rec Review ).  
You can monitor the sound from the speaker or headphones.  
Hold down the – side of EDITSEARCH until the camcorder goes back to the  
scene you want. The last recorded portion is played back. To go forward, hold  
down the + side (Edit Search).  
1
CAMERA  
OFF  
POWER  
2
K
VTR  
START/STOP  
3
EEARCH  
EDITSEARC
EDISEARCH  
To st o p p la yb a ck  
Release EDITSEARCH.  
To g o b a ck t o t h e la st re co rd e d p o in t a ft e r e d it se a rch  
Press END SEARCH. The last recorded point is played back for about 5 seconds (10  
seconds in LP mode) and stops. Note that this function does not work once you eject the  
cassette after you recorded on the tape.  
To b e g in re -re co rd in g  
Press START/ STOP. Re-recording begins from the point you released EDITSEARCH.  
Provided you do not eject the cassette, the transition between the last scene you recorded  
and the next scene you record will be smooth.  
19  
Pla yin g b a ck a t a p e  
You can monitor the playback picture on the LCD screen.  
(1) While pressing the small green button on the POWER switch, set it to VTR.  
The video control buttons light up.  
(2) Insert the recorded tape with the window facing out.  
(3) While pressing OPEN, open the LCD panel. Adjust the angle of the LCD panel  
or the brightness of the LCD screen if necessary.  
(4) Press · to start playback.  
(5) Adjust the volume using VOLUME.  
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV  
or VCR.  
2
1 POWER  
CAMERA  
OFF  
VTR  
4
STOP REW  
PLAY  
FF  
PAUSE REC  
5
3
To stop playback, press π.  
To rew ind the tape, press 0.  
To fast-forw ard the tape rapidly, press ).  
20  
Pla yin g b a ck a t a p e  
Wh e n m o n it o rin g o n t h e LCD scre e n  
You can turn the LCD panel over and move back to the camcorder with the LCD screen  
facing out [a ]. You can adjust the angle of the LCD screen by turning the LCD screen  
up to 20 degrees [b ].  
[a]  
[b]  
20°  
Usin g t h e re m o t e co m m a n d e r  
You can control playback using the supplied Remote Commander. Before using the  
Remote Commander, insert the R6 (size AA) batteries.  
Note on DISPLAY button  
Press DISPLAY to display the screen indicators on the LCD screen. To erase the  
indicators, press DISPLAY again. If the POWER switch is set to CAMERA, you can  
erase the indicator by pressing DISPLAY.  
Using headphones  
Connect headphones (not supplied) to the 2 jack. You can adjust the volume using  
VOLUME. When you use headphones, the speaker on the camcorder is silent.  
To view the playback picture in the view finder  
Close the LCD panel. The viewfinder turns on automatically. When using the  
viewfinder, you can monitor sound only by using headphones.  
To view on the LCD screen again, open the LCD panel. The viewfinder turns off  
automatically.  
Note on the lens cover  
The lens cover does not open when the POWER switch is set to VTR. Do not open the  
lens cover manually. It may cause malfunction.  
21  
Pla yin g b a ck a t a p e  
Va rio u s p la yb a ck m o d e s  
You can enjoy clear pictures on the LCD screen during still, slow and picture search.  
(Crystal-clear still/slow /picture search)  
To vie w a st ill p ict u re (p la yb a ck p a u se )  
Press P during playback. To resume playback, press P or ·.  
To lo ca t e a sce n e (p ict u re se a rch )  
Keep pressing 0 or ) during playback. To resume normal playback, release the  
button.  
To m o n it o r t h e h ig h -sp e e d p ict u re w h ile a d va n cin g t h e t a p e o r  
re w in d in g (skip sca n )  
Keep pressing 0 while rewinding or ) while advancing the tape. To resume  
normal playback, press ·.  
To vie w t h e p ict u re a t 1/5 sp e e d (slo w p la yb a ck)  
Press & on the Remote Commander during playback. To resume normal playback,  
press (. If slow playback lasts for about 1 minute, it shifts to normal speed  
automatically.  
To se le ct t h e p la yb a ck so u n d  
Change the “HiFi SOUND” mode setting in the menu system.  
Notes on playback  
Streaks appear and the sound is muted in the various playback modes.  
When playback pause mode lasts for 5 minutes, the camcorder automatically enters  
stop mode.  
22  
Se a rch in g fo r t h e e n d o f t h e p ict u re  
You can go to the end of the recorded portion after you record and play back the tape to  
make the transition between the last scene you recorded and the next scene smooth.  
The tape starts rewinding or fast-forwarding and the last 5 seconds (10 seconds in LP  
mode) of the recorded portion play back. Then the tape stops at the end of the recorded  
picture (End Search).  
Note that the End Search function does not work once you eject the cassette after you  
have recorded on the tape.  
(1) While pressing OPEN, open the LCD panel.  
(2) Press END SEARCH.  
This function works when the POWER switch is set to either CAMERA or VTR.  
2
END  
SEARCH  
1
If you start recording after using END SEARCH  
Occasionally, the transition between the last scene you recorded and the next scene may  
not be smooth.  
23  
Ad va n ce d o p e ra t io n s  
Usin g a lt e rn a t ive p o w e r so u rce s  
You can choose any of the following power sources for your camcorder: battery pack,  
the mains and 12/ 24 V car battery. Choose the appropriate power source depending on  
where you want to use your camcorder.  
Place  
Pow er source  
Mains  
Accessory to be used  
Indoors  
Outdoors  
Supplied AC power adaptor  
Battery pack  
Battery pack NP-F530 (supplied), NP-F730,  
NP-F930  
In the car  
12 V or 24 V car battery  
Sony car battery charger DC-V515A  
Note on pow er sources  
Disconnecting the power source or removing the battery pack during recording or  
playback may damage the inserted tape. If this happens, restore the power supply  
again immediately.  
Usin g t h e m a in s  
(1) Connect the mains lead to the mains.  
(2) Slide the connecting plate down into the guides at the rear of the camcorder  
until it clicks.  
2
1
To remove the connecting plate  
The connecting plate is removed in the same way as the battery pack.  
WARNING  
The mains lead must only be changed at a qualified service shop.  
PRECAUTION  
The set is not disconnected from the AC power source (mains) as long as it is connected  
to the mains, even if the set itself has been turned off.  
Notes on the VTR/CAMERA lamp  
The VTR/ CAMERA lamp will remain lit for a while even if the unit is unplugged  
after use. This is normal.  
If the VTR/ CAMERA lamp does not light, disconnect the mains lead. After about  
one minute, reconnect the mains lead.  
24  
Usin g a lt e rn a t ive p o w e r so u rce s  
Usin g a ca r b a t t e ry  
Use Sony DC-V515A car battery charger (not supplied). Connect the car battery cord to  
the cigarette lighter socket of a car (12 V or 24 V). Connect the car battery cord to the  
camcorder in the same way as you connect the AC power adaptor.  
To remove the car battery charger  
The car battery charger is removed in the same way as the AC power adaptor.  
This mark indicates that this product is a genuine accessory for Sony  
video products.  
When purchasing Sony video products, Sony recommends that you  
purchase accessories with this “GENUINE VIDEO ACCESSORIES”  
mark.  
25  
Ch a n g in g t h e m o d e se t t in g s  
You can change the mode settings in the menu system to further enjoy the features and  
functions of the camcorder.  
(1) Press MENU to display the menu.  
(2) Turn the control dial to select the desired item, then press the dial.  
(3) Turn the control dial to select the desired mode, and press the dial. If you  
want to change the other modes, repeat steps 2 and 3.  
(4) Press MENU to erase the menu display.  
CAMERA  
VTR  
2
MENU  
1
MENU  
MENU  
MENU  
WIND  
COMMANDER  
ORC
REC
OFF  
1
WIND  
OFF  
COMMANDER  
EDIT  
ON  
COMMANDER  
ORC TO SET  
REC MODE  
TITLE COL  
TITLE POS  
TITLE1 SET  
MENU  
HiFi SOUND  
REC MODE  
NTSC PB  
TBC  
TITL
WIND  
SEL/  
PUSH  
EXEC  
TITL
COMMANDER  
TITL
ON  
ORC TO SET  
RE
DNR  
MENU  
[MEN
TIT
[MENU]: END  
[MENU]: END  
TIT
TITLE1 SET  
TIT
TITLE2 SET  
D
ZOOM  
[ME
LCD B.L.  
LCD COLOUR  
BEEP  
ON  
DISPLAY  
[MENU]: END  
MENU  
2
SEL/  
PUSH  
EXEC  
BEEP  
ON  
OFF  
[MENU]: END  
3
MENU  
1
SEL/  
PUSH  
EXEC  
BEEP  
ON  
OFF  
[MENU]: END  
MENU  
MENU  
2
4
TITLE1 SET  
TITLE2 SET  
SEL/  
PUSH  
EXEC  
D
ZOOM  
LCD B.L.  
LCD COLOUR  
BEEP  
OFF  
DISPLAY  
[MENU]: END  
Wh ile re co rd in g in m irro r m o d e  
The menu does not appear on the LCD screen.  
26  
Ch a n g in g t h e m o d e se t t in g s  
Se le ct in g t h e m o d e se t t in g o f e a ch it e m  
It e m s fo r b o t h CAMERA a n d VTR m o d e s  
COMMANDER <ON/OFF>  
Select ON when using the supplied Remote Commander for the camcorder.  
Select OFF when not using the Remote Commander.  
REC MODE* <SP/LP>  
Select SP when recording in SP (standard play) mode.  
Select LP when recording in LP (long play) mode.  
LCD B. L.* <BRT NORMAL/BRIGHT>  
Normally select BRT NORMAL.  
Select BRIGHT when the LCD screen is dark.  
When you select BRIGHT, battery life is about 10 percent shorter during recording.  
When you use the power sources other than the battery pack, BRIGHT is automatically  
selected, and LCD B. L. is not displayed in the menu.  
LCD COLOUR*  
Select this item to adjust the colour on the LCD screen.  
BEEP* <ON/OFF>  
Select ON so that beeps sound when you start/ stop recording, etc.  
Select OFF when you do not want to hear the beep sound.  
DISPLAY*  
Normally select LCD. The display appears on the LCD screen.  
Select V-OUT/ LCD to show the display both on the TV screen and LCD screen.  
It e m s fo r CAMERA m o d e o n ly  
WIND <ON/OFF>  
Select ON to reduce wind noise when recording in strong wind.  
Normally select OFF.  
ORC TO SET*  
Select this item to automatically adjust the recording condition to get the best possible  
recording.  
If you have already performed this function, “ORC ON” is displayed.  
TITLE COL* <WHITE/YELLOW/VIOLET/RED/CYAN/GREEN/BLUE>  
Select the colour of the title.  
TITLE POS* <CENTER/BOTTOM>  
Select CENTER to centre the title in the picture.  
Select BOTTOM to position the title at the bottom of the picture.  
TITLE1 SET*/TITLE2 SET*  
Store your own titles.  
27  
Ch a n g in g t h e m o d e se t t in g s  
D ZOOM* <ON/OFF>  
Select ON to activate digital zooming.  
Select OFF to not use the digital zoom. The camcorder goes back to 15x zoom.  
REC LAMP* <ON/OFF>  
Select OFF when you do not want the camera recording/ battery lamp at the front of  
the unit to light up.  
Normally select ON.  
AUTO DATE* <ON/OFF>  
Select ON to record the date for 10 seconds after recording has started.  
Select OFF to not record the date.  
CLOCK SET*  
Reset the date or time.  
DEMO MODE* <ON/OFF>  
Select ON to make the demonstration appear.  
Select OFF to deactivate the demonstration mode.  
Notes on DEMO MODE  
DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts  
about 10 minutes after you set the POWER switch to CAMERA without inserting a  
cassette.  
Note that you cannot select STBY of DEMO MODE in the menu system.  
You cannot select DEMO MODE when a cassette is inserted in the camcorder.  
If you insert a cassette during the demonstration, the demonstration stops. You can  
start recording as usual. DEMO MODE automatically returns to STBY.  
To look at the demonstration at once  
Eject the cassette, if inserted. Select ON of DEMO MODE and erase the menu display.  
The demonstration will begin.  
When you turn off the camcorder once, DEMO MODE automatically returns to STBY.  
28  
Ch a n g in g t h e m o d e se t t in g s  
It e m s fo r VTR m o d e o n ly  
EDIT <ON/OFF>  
Select ON to minimize picture deterioration when editing.  
Normally select OFF.  
HiFi SOUND <STEREO/1/2>  
Normally select STEREO.  
Select 1 or 2 to play back a dual sound track tape.  
NTSC PB* <ON PAL TV/NTSC 4.43>  
Normally select ON PAL TV.  
Select NTSC 4.43 when playing back a tape recorded in the NTSC colour system.  
When you play back on a Multi System TV, select the best mode while watching the  
picture on the TV.  
TBC* <ON/OFF>  
Normally select ON, to correct for jitter.  
Select OFF to not correct for jitter. The picture may not be steady when played back.  
Note on TBC setting  
Set TBC to OFF when:  
Playing back a tape you have dubbed over.  
Playing back a tape on which you recorded the signal of a TV game or similar  
machine.  
The playback picture fluctuates.  
DNR* <ON/OFF>  
Normally select ON to reduce picture noise.  
Select OFF if the picture has a lot of movement, causing a conspicuous afterimage.  
The follow ing settings w ork only during playback  
EDIT, HiFi SOUND, TBC, and DNR.  
* These settings are retained even when the battery is removed, as long as the lithium  
battery is in place.  
29  
Fa d e -in a n d fa d e -o u t  
You can fade in or out to give your recording a professional appearance.  
When fading in, the picture gradually fades in from black or mosaic while the sound  
increases. When fading out, the picture gradually fades to black or mosaic while the  
sound decreases.  
Wh e n fa d in g in [a ]  
(1) While the camcorder is in Standby mode, press FADER until the FADER or M.  
(mosaic) FADER indicator flashes.  
(2) Press START/ STOP to start recording. The fade indicator stops flashing.  
Wh e n fa d in g o u t [b ]  
(1) During recording, press FADER until the FADER or M. (mosaic) FADER  
indicator flashes.  
(2) Press START/ STOP to stop recording. The fade indicator stops flashing, and  
then recording stops.  
[a ]  
STBY  
REC  
FADER  
M.FADER  
[b ]  
STBY  
REC  
FADER  
M.FADER  
1
2
K
FADER  
START/STOP  
To ca n ce l t h e fa d e -in /fa d e -o u t fu n ct io n  
Before pressing START/ STOP, press FADER until the fade indicator disappears.  
When the date or time indicator is displayed  
The date or time indicator does not fade in or fade out.  
When the title is displayed  
You cannot use the fader function. When FADER is set, you cannot superimpose a title.  
When the START/STOP MODE sw itch is set to 5SEC or  
You cannot use the fader function.  
30  
Usin g t h e w id e m o d e fu n ct io n  
Se le ct in g t h e d e sire d m o d e  
You can record a cinemalike picture (CINEMA) or a 16:9 wide picture to watch on the  
16:9 wide-screen TV (16:9 FULL).  
[b]  
CINEMA  
CINEMA  
[a]  
[c]  
[e]  
[f]  
16:9 FULL  
16:9 FULL  
[d]  
CINEMA  
Black bands appear at the top and the bottom of the screen, and the viewfinder or LCD  
screen [a] and a normal TV screen [b] look wide. You can also watch the picture  
without black bands on a wide-screen TV [c].  
16:9 FULL  
The picture in the viewfinder or LCD screen [d] or on a normal TV [e] is horizontally  
compressed. You can watch the picture of normal images on a wide-screen TV [f].  
31  
Usin g t h e w id e m o d e fu n ct io n  
Usin g t h e w id e m o d e fu n ct io n  
While the camcorder is in Standby mode, press 16:9 WIDE repeatedly so that the  
desired mode indicator appears in the viewfinder or on the LCD screen.  
CINEMA  
16:9 WIDE  
16:9 FULL  
To ca n ce l w id e m o d e  
Press 16:9 WIDE repeatedly until the wide mode indicator disappears.  
To w a t ch t h e t a p e re co rd e d in w id e m o d e  
To watch the tape recorded in CINEMA mode, set the screen mode of the wide-screen  
TV to zoom mode. To watch the tape recorded in 16:9 FULL mode, set it to full mode.  
For details, refer to the instruction manual of your TV.  
Note that the picture recorded in 16:9 FULL mode looks compressed on a normal TV.  
Notes on w ide mode  
If wide mode is set to 16:9 FULL, the Steady Shot function does not work and the  
indicator flashes.  
When you record in 16:9 FULL mode, the date or time indicator will be widened on  
the wide-screen TV.  
If you dub a tape, the tape is copied in the same mode as the original recording.  
The wide mode is canceled automatically 5 minutes after you remove the power  
source.  
When recording, you cannot change the mode.  
32  
En jo yin g p ict u re e ffe ct  
Se le ct in g p ict u re e ffe ct  
You can make pictures like those of television with the Picture Effect function.  
[a ]  
[b ]  
[c]  
[d ]  
[e ]  
[f]  
PASTEL [a]  
The contrast of the picture is emphasized, and the picture looks like an animated  
cartoon.  
NEG. ART [b]  
The colour and brigtness of the picture is reversed.  
SEPIA  
The picture is sepia.  
B&W  
The picture is monochrome (black and white).  
SOLARIZE [c]  
The light intensity is more clear, and the picture looks like an illustration.  
MOSAIC [d]  
The picture is mosaic.  
SLIM [e]  
The picture expands vertically.  
STRETCH [f]  
The picture expands horizontally.  
33  
En jo yin g p ict u re e ffe ct  
Usin g p ict u re e ffe ct fu n ct io n  
(1) Press PICTURE EFFECT.  
(2) Turn the control dial to select the desired picture effect mode.  
2
1
PICTURE EFFECT  
PASTEL  
SEL/  
PUSH  
EXEC  
NEG. ART  
SEPIA  
B & W  
SOLARIZE  
MOSAIC  
SLIM  
STRETCH  
To t u rn o ff p ict u re e ffe ct  
Press PICTURE EFFECT. The indicator in the viewfinder or on the LCD screen goes  
out.  
Note on the picture effect  
When you turn the power off, the camcorder returns automatically to normal mode.  
34  
Fo cu sin g m a n u a lly  
Wh e n t o u se m a n u a l fo cu s  
In the following cases you should obtain better results by adjusting the focus manually.  
[a ]  
[b ]  
[c]  
[d ]  
Insufficient light [a ]  
Subjects with little contrast - walls, sky, etc. [b ]  
Too much brightness behind the subject [c]  
Horizontal stripes [d ]  
Subjects through frosted glass  
Subjects beyond nets, etc.  
Bright subject or subject reflecting light  
Shooting a stationary subject when using a tripod  
35  
Fo cu sin g m a n u a lly  
Fo cu sin g m a n u a lly  
When focusing manually, first focus in telephoto before recording, and then reset the  
shot length.  
(1) Set FOCUS to MANUAL. The f indicator appears in the viewfinder.  
(2) Move the power zoom lever to the “T” side until the lever reaches the end.  
(3) Turn the NEAR/ FAR dial to achieve a sharp focus.  
(4) Set the desired shot length using the power zoom lever.  
1
3
2
T
W
AUTO  
MANUAL  
INFINITY  
W
T
4
NEAR  
FAR  
T
W
W
T
To re t u rn t o a u t o fo cu s m o d e  
Set FOCUS to AUTO. The f indicator in the viewfinder disappears.  
Shooting in relatively dark places  
Shoot at wide-angle after focusing in the telephoto position.  
To re co rd a ve ry d ist a n t su b je ct  
Push FOCUS down to INFINITY. The lens focuses on the most distant subject while  
FOCUS is held down. When it is released, manual focus mode is resumed.  
Use this function when shooting through a window or a screen, to focus on a most  
distant subject.  
Notes on manual focusing  
The following indicators may appear:  
when recording a very distant subject.  
when the subject is too close to focus on.  
36  
Usin g t h e PROGRAM AE fu n ct io n  
Se le ct in g t h e b e st m o d e  
You can select one of six PROGRAM AE (Auto Exposure) modes to suit your shooting  
situation, referring to the following.  
a
A
Spotlight mode  
For subjects in spotlight, such as at the theatre or a formal event.  
a Soft Portrait mode  
For zooming in on a still subject in telephoto mode, or for a subject behind an obstacle  
such as a screen. Creates a soft background for subjects such as people or flowers, and  
faithfully reproduces skin colour.  
A
Sports Lesson mode  
For recording fast-moving subjects such as in tennis or golf games.  
Beach & Ski mode  
For people or faces in strong light or reflected light, such as at a beach in midsummer or  
on a ski slope.  
Sunset & Moon mode  
For recording subjects in dark environments such as sunsets, fireworks, neon signs, or  
general night views.  
Landscape mode  
For distant subjects such as mountains or when recording a subject behind an obstacle  
such as a window or screen.  
37  
Usin g t h e PROGRAM AE fu n ct io n  
Usin g t h e PROGRAM AE fu n ct io n  
(1) Press PROGRAM AE.  
(2) Turn the control dial to select the desired PROGRAM AE mode.  
2
1
PROGRAM  
SEL/  
AE  
PUSH  
EXEC  
a
A
To t u rn o ff p ro g ra m AE  
Press PROGRAM AE.  
Notes on focus setting  
In the Spotlight, Sports lesson and Beach & Ski modes, you cannot take close-ups  
because the camcorder is set to focus only on subjects in the middle to far distance.  
In the Sunset & Moon and Landscape modes, the camcorder is set to focus only on  
distant subjects.  
Note on PROGRAM AE  
You can adjust the exposure while recording using PROGRAM AE mode.  
38  
Sh o o t in g w it h b a cklig h t in g  
When you shoot a subject with the light source behind the subject or a subject with a  
light background, use the BACK LIGHT function.  
Press BACK LIGHT. The c indicator appears in the viewfinder or on the LCD screen.  
[a]  
BACK LIGHT  
[b]  
c
[a ] Subject is too dark because of backlight.  
[b ] Subject becomes bright with backlight compensation.  
Aft e r sh o o t in g  
Be sure to release this adjustment condition by pressing BACK LIGHT again. The c  
indicator disappears. Otherwise, the picture will be too bright under normal lighting  
conditions.  
This function is also effective under the follow ing conditions:  
On snow, e.g. at a ski resort  
At the beach under strong sunshine  
A subject with a light source nearby or a mirror reflecting light  
A white subject against a white background. Especially when you shoot a person  
wearing shiny clothes made of silk or synthetic fiber, his or her face tends to become  
dark if you do not use this function.  
To m a ke a fin e a d ju st m e n t  
You can adjust the exposure manually. However, when you adjust the exposure  
manually, BACK LIGHT does not operate.  
39  
Ad ju st in g t h e e xp o su re  
Wh e n t o a d ju st t h e e xp o su re  
Adjust the exposure manually under the following cases.  
[a ]  
[b ]  
[a ]  
The background is too bright (back lighting)  
Insufficient light: most of the picture is dark  
[b ]  
Bright subject and dark background  
To record the darkness faithfully  
Ad ju st in g t h e e xp o su re  
(1) Press EXPOSURE.  
(2) Turn the control dial to adjust the brightness.  
1
EXPOSURE  
+
+
2
SEL/  
PUSH  
EXEC  
To re t u rn t o a u t o m a t ic e xp o su re m o d e  
Press EXPOSURE again.  
Shooting w ith the sun behind you  
If the light source is behind your subject, or in the following situations, the subject will  
be recorded too dark.  
The subject is indoors and there is a window behind the subject.  
Bright light sources are included in the scene.  
When shooting a person wearing white or shiny clothes in front of a white  
background, the face will be recorded too dark.  
Shooting in the dark  
We recommend you to use a video light (not supplied). To get the best colour, you must  
maintain a sufficient light level.  
When you adjust the exposure manually  
BACK LIGHT does not work.  
If you press PROGRAM AE, the camcorder automatically returns to automatic  
exposure mode.  
40  
Re le a sin g t h e STEADY SHOT fu n ct io n  
When you shoot, the  
indicator appears in the viewfinder. This indicates that the  
Steady Shot function is working and the camcorder compensates for camera-shake.  
You can release the Steady Shot function when you do not need to use the Steady Shot  
function. Do not use the Steady Shot function when shooting a stationary object with a  
tripod.  
Set STEADY SHOT to OFF.  
STEADY  
SHOT  
ON  
OFF  
To a ct iva t e t h e St e a d y Sh o t fu n ct io n a g a in  
Set STEADY SHOT to ON.  
Notes on the Steady Shot function  
The Steady Shot function will not correct excessive camera-shake.  
When you switch the STEADY SHOT function on or off, the exposure may fluctuate.  
Steady Shot does not operate in 16:9 FULL mode. If you set STEADY SHOT to ON,  
the  
indicator flashes.  
41  
Su p e rim p o sin g a t it le  
You can select one of eight preset titles. You can also select the position, and colour of  
titles in the menu system.  
Usin g t it le s  
To a d d t h e t it le fro m t h e b e g in n in g  
(1) While the camcorder is in Standby mode, press TITLE repeatedly until the  
desired title appears.  
Each time a new title appears, it is flashing. When the desired title appears,  
wait for it to stop flashing.  
(2) Press START/ STOP to start recording.  
(3) When you want to stop recording the title, press TITLE.  
To a d d t h e t it le w h ile yo u a re re co rd in g  
(1) While the camcorder is in Standby mode, press TITLE repeatedly until the  
desired title appears.  
Each time a new title appears, it is flashing.  
(2) When the desired title appears, wait for it to stop flashing, and press TITLE  
again to erase the title from the display.  
(3) Press START/ STOP to start recording.  
(4) When you reach the point where you want to add the title, press TITLE.  
(5) When you want to stop recording the title, press TITLE again.  
TITLE  
Titles cycle as follow s:  
Original title 1 n Original title 2 n HELLO! n HAPPY BIRTHDAY n HAPPY  
HOLIDAYS n CONGRATULATIONS! n OUR SWEET BABY n WEDDING n  
VACATION n THE END  
After “THE END” appears, the title display disappears, and then Original title 1  
returns.  
Notes on superimposing a title  
If you have not made any original titles, they are not displayed.  
You cannot select a title while you are recording.  
FADER does not work while the title is displayed.  
You cannot simultaneously record the title and the date or time.  
You cannot record the title during fade-in/ fade-out.  
If you display the menu while superimposing a title, the title is not recorded while  
the menu is being displayed.  
42  
Su p e rim p o sin g a t it le  
To se le ct t h e co lo u r o f t h e t it le  
(1) While the camcorder is in Standby mode, press MENU to display the menu.  
(2) Turn the control dial to select TITLE COL, then press the dial.  
(3) Turn the control dial to select the desired colour, then press the dial.  
You can chose from the following 7 colours:  
WHITE ˜ YELLOW ˜ VIOLET ˜ RED ˜ CYAN ˜ GREEN ˜ BLUE  
(4) Press MENU to erase the menu display.  
To se le ct t h e p o sit io n o f t h e t it le  
(1) While the camcorder is in Standby mode, press MENU to display the menu.  
(2) Turn the control dial to select TITLE POS, then press the dial.  
(3) Turn the control dial to select the desired position (CENTER or BOTTOM),  
then press the dial.  
(4) Press MENU to erase the menu display.  
TITLE COL  
MENU  
TITLE POS  
MENU  
2
1
MENU  
1
2
WIND  
WIND  
COMMANDER  
ORC TO SET  
REC MODE  
TITLE COL  
TITLE POS  
TITLE1 SET  
COMMANDER  
ORC TO SET  
REC MODE  
TITLE COL  
TITLE POS  
TITLE1 SET  
SEL/  
PUSH  
EXEC  
WHITE  
CENTER  
[MENU]: END  
MENU  
[MENU]: END  
MENU  
WHITE  
YELLOW  
VIOLET  
TITLE COL RED  
SEL/  
PUSH  
EXEC  
CYAN  
GREEN  
BLUE  
TITLE POS  
CENTER  
BOTTOM  
[MENU]: END  
MENU  
[MENU]: END  
MENU  
3 1  
WHITE  
YELLOW  
VIOLET  
RED  
CYAN  
GREEN  
BLUE  
SEL/  
PUSH  
EXEC  
TITLE COL  
TITLE POS  
CENTER  
BOTTOM  
[MENU]: END  
[MENU]: END  
MENU  
MENU  
WIND  
2
WIND  
COMMANDER  
ORC TO SET  
REC MODE  
TITLE COL  
TITLE POS  
TITLE1 SET  
COMMANDER  
ORC TO SET  
REC MODE  
TITLE COL  
TITLE POS  
TITLE1 SET  
SEL/  
PUSH  
EXEC  
GREEN  
BOTTOM  
[MENU]: END  
[MENU]: END  
43  
Ma kin g yo u r o w n t it le s  
You can make up to two titles and store them in the camcorder. We recommend to eject  
the cassette before you begin.  
Your title can have up to 22 characters.  
(1) While the camcorder is in Standby mode, press MENU to display the menu.  
(2) Turn the control dial to select TITLE1 SET or TITLE2 SET, then press the dial.  
(3) Turn the control dial to select the desired character, then press the dial.  
(4) Repeat step 3 until you finish the title.  
(5) When you are finished, turn the control dial to select  
, then press the dial.  
(6) Press MENU to erase the menu display.  
2
1
MENU  
MENU  
MENU  
COMMANDER  
ORC TO SET  
REC MODE  
TITLE COL  
TITLE POS  
TITLE1 SET  
TITLE2 SET  
Â
L
M
N
O
P
µ
SEL/  
PUSH  
EXEC  
SEL/  
PUSH  
EXEC  
TITLE1 SET  
>
– – – – – – –  
>
– – – – – –  
[MENU]: END  
[MENU]: END  
3
5
MENU  
MENU  
Â
Â
C
D
E
F
>
>
TITLE1 SET  
NEW YORK  
TITLE1 SET  
N
– – – – – –  
G
µ
µ
[MENU]: END  
[MENU]: END  
To e d it a t it le yo u h a ve st o re d  
In step 2, select TITLE1 SET or TITLE2 SET, depending on which title you want to edit,  
then change the title.  
To move the cursor to the character on the left side, select M.  
If you enter 22 characters in step 4  
The title is stored immediately (and you can skip step 5).  
If you take 5 minutes or longer to enter characters w hile a cassette is in the  
camcorder  
The power goes off automatically. Characters you have entered remain. Turn  
STANDBY down once and then up again, then proceed from step 1.  
To d e le t e a t it le  
At the leftmost character position, select  
and press the dial. Do not erase the title by  
selecting empty spaces. If you do so, a title full of empty spaces is stored.  
44  
Re co rd in g w it h t h e d a t e /t im e  
Before you start recording or during recording, press DATE or TIME. You can record  
the date or time displayed in the viewfinder or on the LCD screen with the picture.  
Press DATE (or TIME), then press TIME (or DATE) to display the date and time  
together.  
The clock is already set at the factory to Sydney time for Australia and New Zealand  
models, to Tokyo time for the models sold in Japan and Hong Kong time for other  
models. You can reset the clock in the menu system.  
TIME  
DATE  
4 7 1997  
4 7 1997  
17:30:00  
TIME  
DATE  
17:30:00  
To st o p re co rd in g w it h t h e d a t e a n d /o r t im e  
Press DATE and/ or TIME again. The date and/ or time indicator disappear. The  
recording continues.  
Note on the date or time indicator  
If you press DATE or TIME while you are recording in CINEMA mode, the indicators  
in the viewfinder or on the LCD screen move upwards.  
45  
Op t im izin g t h e re co rd in g co n d it io n  
Use this feature to check the tape condition before recording, so that you can get the  
best possible picture (ORC).  
(1) While the camcorder is in Standby mode, press MENU to display the menu.  
(2) Turn the control dial to select ORC TO SET, then press the dial.  
“START/ STOP KEY” flashes.  
(3) Press START/ STOP.  
The camcorder takes about 5 seconds to check the tape condition and then  
returns to Standby mode.  
MENU  
2
1
1
2
MENU  
WIND  
COMMANDER  
ORC TO SET  
REC MODE  
TITLE COL  
TITLE POS  
TITLE1 SET  
SEL/  
PUSH  
EXEC  
SEL/  
PUSH  
EXEC  
START/STOP  
KEY  
[MENU]: END  
STBY  
0:00:00  
3
K
ORC  
START/STOP  
Ea ch t im e yo u in se rt t h e ca sse t t e  
Perform the above procedures.  
To se e if t h e t a p e co n d it io n h a s b e e n ch e cke d  
If the ORC indicator lights up in the display window, the tape condition has been  
checked.  
Notes on the ORC function  
When you set ORC TO SET, the recording on the tape is erased for about 0.1 second  
so that the camcorder can check the tape condition. Be careful when you use a  
recorded tape. The 0.1 second blank is erased if you record from the point where you  
set ORC TO SET for more than 2 seconds, or if you record over the blank.  
You cannot use this function on a tape with the red mark on the cassette exposed.  
46  
Wa t ch in g o n a TV scre e n  
Connect the camcorder to your VCR or TV to watch the playback picture on the TV  
screen. When monitoring the playback picture by connecting the camcorder to your TV,  
we recommend you to use mains for the power source.  
While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion  
may occur.  
Co n n e ct in g d ire ct ly t o a VCR/TV w it h Vid e o /Au d io in p u t ja cks  
Open the jack cover. With using the supplied A/ V connecting cable, connect the  
camcorder to the LINE IN inputs on the TV or VCR connected to the TV. Set the TV/  
VCR selector on the TV to VCR. When connecting to the VCR, set the input selector on  
the VCR to LINE.  
(not supplied)  
S VIDEO OUT  
IN  
[a ]  
S VIDEO  
VIDEO  
VIDEO OUT  
[b ]  
AUDIO  
AUDIO OUT  
: Signal flow  
If your VCR or TV has an S video jack, connect using the S video cable (not supplied)  
[a ] to obtain a high quality picture.  
If you are going to connect the camcorder using the S video cable (not supplied) [a ],  
you do not need to connect the yellow (video) plug of the A/ V connecting cable [b ].  
If your VCR or TV is a monaural type  
Connect only the white plug for audio on both the camcorder and the VCR or the TV.  
With this connection, the sound is monaural.  
To connect to a VCR or TV w ithout Video/Audio input jacks  
Use an RFU adaptor (not supplied).  
47  
Ed it in g o n t o a n o t h e r t a p e  
You can create your own video programme by editing with any other h 8 mm, H  
Hi8, j VHS, k S-VHS, VHSC, K S-VHSC or l Betamax VCR that has  
video/ audio inputs.  
Be fo re e d it in g  
Connect the camcorder to the VCR using the supplied A/ V connecting cable.  
Set the input selector on the VCR to LINE, if available.  
(1) While pressing the small green button on the POWER switch, set it to VTR.  
(2) Set EDIT to ON in the menu system.  
1
POWER  
CAMERA  
OFF  
VTR  
1
2
3
2
MENU  
SEL/  
PUSH  
EXEC  
SEL/  
PUSH  
EXEC  
MENU  
EDIT  
OFF  
ON  
[MENU]: END  
: Signal flow  
48  
Ed it in g o n t o a n o t h e r t a p e  
St a rt in g e d it in g  
Turn down the volume of the camcorder while editing. Otherwise, picture distortion  
may occur.  
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert  
your recorded tape into the camcorder.  
(2) Play back the recorded tape on the camcorder until you locate the point where  
you want to start editing, then press P to set the camcorder in playback pause  
mode.  
(3) On the VCR, locate the recording start point and set the VCR in recording  
pause mode.  
(4) Press P on the camcorder and VCR simultaneously to start editing.  
To e d it m o re sce n e s  
Repeat steps 2 to 4.  
To st o p e d it in g  
Press π on both the camcorder and the VCR.  
Note on Fine Synchro Edit  
If you connect a video deck that has the Fine Synchro Edit feature to the LANC l jack  
of the camcorder, using a LANC cable (not supplied), the edit will be even more  
precise.  
49  
Re co rd in g fro m a VCR o r TV  
You can record a tape from another VCR or a TV program from a TV that has video/  
audio outputs. Connect the camcorder to the VCR or TV using the supplied A/ V cable.  
Turn down the volume of the camcorder while editing. Otherwise, picture distortion  
may occur.  
(1) While pressing the small green button on the POWER switch, set it to VTR.  
(2) Press r REC and the button on the right together on the camcorder at the  
point where you want to start recording.  
In recording and recording pause mode, S video and VIDEO/ AUDIO jacks  
automatically work as input jacks.  
POWER  
REC  
1
2
CAMERA  
OFF  
VTR  
TV  
(not supplied)  
S VIDEO  
VIDEO  
VCR  
[a ]  
[b ]  
S VIDEO  
VIDEO  
AUDIO  
AUDIO  
: Signal flow  
If your VCR or TV has an S video jack, connect using the S video cable (not supplied)  
[a ] to obtain a high quality picture.  
If your VCR or TV is a monaural type, connect only the white plug for audio on both  
the camcorder and the VCR or TV.  
If your VCR or TV does not have an S VIDEO OUT jack, connect cable [b ]. Do not  
connect the S video cable (not supplied) [a ] to the camcorder.  
To check the picture from a VCR or TV before recording  
Press P after pressing r REC. You can check the picture in the viewfinder or on the  
LCD screen.  
To stop recording  
Press π.  
50  
Ad d it io n a l in fo rm a t io n  
Ch a n g in g t h e lit h iu m b a t t e ry in t h e ca m co rd e r  
Your camcorder is supplied with a lithium battery installed. When the battery becomes  
weak or dead, the I indicator flashes in the viewfinder for about 5 seconds when you  
set the POWER switch to CAMERA. In this case, replace the battery w ith a Sony  
CR2025 or Duracell DL-2025 lithium battery. Use of any other battery may present  
a risk of fire or explosion. Discard used batteries according to the manufacturers  
instructions.  
The lithium battery for the camcorder lasts for about 1 year under normal operation.  
(The lithium battery that comes installed at the factory may not last 1 year.)  
4
7
1997  
No t e s o n lit h iu m b a t t e ry  
Keep the lithium battery out of the reach of children.  
Should the battery be sw allow ed, immediately consult a doctor.  
Wipe the battery with a dry cloth to assure a good contact.  
Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.  
Note that the lithium battery has a positive (+) and a negative (–) terminals as  
illustrated. Be sure to install the lithium battery so that terminals on the battery  
match the terminals on the camcorder.  
(+)  
(---)  
WARNING  
The battery may explode if mistreated. Do not recharge, disassemble, or dispose of in  
fire.  
51  
Ch a n g in g t h e lit h iu m b a t t e ry in t h e ca m co rd e r  
Ch a n g in g t h e lit h iu m b a t t e ry  
When replacing the lithium battery, keep the battery pack or other power source  
attached. Otherwise, you will need to reset the date, time and other items in the menu  
system retained by the lithium battery.  
(1) Open the LCD panel and open the lid of the lithium battery compartment.  
(2) Push the lithium battery down once and pull it out from the holder.  
(3) Install the lithium battery with the positive (+) side facing out. Close the lid.  
1
2
3
1
5  
C
1
25  
0
2
R
2
C
52  
Re se t t in g t h e d a t e a n d t im e  
You can reset the date and time in the menu system.  
(1) While the camcorder is in Standby mode, press MENU to display the menu.  
(2) Turn the control dial to select CLOCK SET, then press the dial.  
(3) Turn the control dial to adjust the desired year, then press the dial.  
(4) Set the month, day, hour and minutes by turning the control dial and pressing  
the dial.  
(5) Press MENU to erase the menu display.  
1
2
1
2
MENU  
MENU  
MENU  
MENU  
LCD COLOUR  
BEEP  
REC LAMP  
AUTO DATE  
DISPLAY  
WIND  
OFF  
SEL/  
PUSH  
EXEC  
COMMANDER  
ORC TO SET  
REC MODE  
TITLE COL  
TITLE POS  
TITLE1 SET  
SEL/  
PUSH  
EXEC  
1 1 1997  
12:00:00  
1997  
1
1
CLOCK SET  
DEMO MODE  
CLOCK SET  
[MENU]: END  
12 00  
[MENU]: END  
[MENU]: END  
4
1
1997  
7
1
SEL/  
PUSH  
EXEC  
SEL/  
CLOCK SET  
PUSH  
EXEC  
12 00  
[MENU]: END  
2
1997  
7
4
SEL/  
PUSH  
EXEC  
SEL/  
PUSH  
EXEC  
CLOCK SET  
[MENU]: END  
12 00  
3
MENU  
3
SEL/  
PUSH  
EXEC  
1997  
1
1
1
1997  
7
4
SEL/  
PUSH  
EXEC  
SEL/  
PUSH  
EXEC  
CLOCK SET  
MENU  
CLOCK SET  
[MENU]: END  
17 00  
1998  
1
1
CLOCK SET  
2
MENU  
4
1997  
7
4
SEL/  
PUSH  
EXEC  
SEL/  
PUSH  
EXEC  
SEL/  
PUSH  
EXEC  
CLOCK SET  
[MENU]: END  
1997  
1
1
17 30  
CLOCK SET  
[MENU]: END  
12 00  
To co rre ct t h e d a t e a n d t im e se t t in g  
Repeat the above procedure.  
53  
Re se t t in g t h e d a t e a n d t im e  
To ch e ck t h e p re se t d a t e a n d t im e  
Press DATE to display the date indicator.  
Press TIME to display the time indicator.  
When you press the same button again, the indicator goes off.  
The year changes as follow s:  
1997  
˜
1998  
N
· · · · n 2029  
Note on the time indicator  
The internal clock of this camcorder operates on a 24-hour cycle.  
Usa b le ca sse t t e s a n d p la yb a ck m o d e s  
Se le ct in g ca sse t t e t yp e s  
This Hi8 system is an extension of the standard 8 mm system, and was developed for  
higher-quality pictures.  
You can use Hi8 video and standard 8 mm cassettes. When you use a Hi8 video  
cassette, the recording is in the Hi8 system. When you use a standard 8mm cassette, the  
recording is in the standard 8 mm system. You cannot record on standard 8 mm  
cassettes in the Hi8 system.  
If you are going to play back the tape using a standard 8mm video recorder/ player, you  
should use standard 8 mm cassettes.  
Wh e n yo u p la y b a ck  
The playback mode (SP/ LP) and system (Hi8/ standard 8 mm) are selected  
automatically according to the format in which the tape has been recorded. The quality  
of the recorded picture in LP mode, however, will not be as good as that in SP mode.  
No t e o n AFM HiFi st e re o  
When you play back a tape, the sound will be in monaural if:  
You record the tape using this camcorder, then play it back on an AFM HiFi  
monaural video recorder/ player.  
You record the tape on an AFM HiFi monaural video recorder, then play it back on  
this camcorder.  
Fo re ig n 8 m m vid e o  
Because the TV colour systems differ from country to country, you may not be able to  
play back foreign pre-recorded tapes. Refer to the list of “Using your camcorder  
abroad” to check the TV colour system of foreign countries.  
54  
Usa b le ca sse t t e s a n d p la yb a ck m o d e s  
Playing back an NTSC-recorded tape  
You can play back tapes recorded in the NTSC video system using the SP mode. If the  
tape is recorded in the AFM HiFi system, the AFM HiFi sound is reproduced.  
However, note that the following will occur during playback of an NTSC-recorded tape.  
When playing back a tape on a TV screen, you may not get the original colour  
depending on the TV. When you play back on a Multi System TV, set NTSC PB to  
the desired mode in the menu system.  
During playback, a black band appears on the lower part of the viewfinder.  
You cannot play back a tape recorded in NTSC video system with LP mode neither  
on the LCD nor on a TV screen.  
If a tape has portions recorded in PAL and NTSC video systems, the tape counter  
reading is not correct. This discrepancy is due to the difference between the counting  
cycle of the two video systems.  
You cannot edit the NTSC-recorded tape onto another VCR.  
Tip s fo r u sin g t h e b a t t e ry p a ck  
This section shows you how you can get the most out of your battery pack.  
Pre p a rin g t h e b a t t e ry p a ck  
Alw a ys ca rry a d d it io n a l b a t t e rie s  
Have sufficient battery pack power to do 2 to 3 times as much recording as you have  
planned.  
Ba t t e ry life is sh o rt e r in a co ld e n viro n m e n t  
Battery efficiency is decreased, and the battery will be used up more quickly, if you are  
recording in a cold environment.  
To sa ve b a t t e ry p o w e r  
Turn STANDBY down when not recording to save battery power.  
A smooth transition between scenes can be made even if recording is stopped and  
started again. While you are positioning the subject, selecting an angle, or looking  
through the viewfinder lens or on the LCD screen, the lens moves automatically and the  
battery is used. The battery is also used when a tape is inserted or removed.  
Wh e n t o re p la ce t h e b a t t e ry p a ck  
While you are using your camcorder, the remaining battery indicator decreases  
gradually as battery power is used up.  
The remaining time in minutes also appears.  
When the remaining battery indicator reaches the lowest point, the i indicator may  
appear and start flashing in the viewfinder or on the LCD screen.  
When the i indicator changes from slow flashing to rapid flashing while you are  
recording, set the POWER switch to OFF on the camcorder and replace the battery pack.  
Leave the tape in the camcorder to obtain a smooth transition between scenes after the  
battery pack has been replaced.  
55  
Tip s fo r u sin g t h e b a t t e ry p a ck  
No t e s o n t h e re ch a rg e a b le b a t t e ry p a ck  
Ca u t io n  
Never leave the battery pack in temperatures above 60°C (140°F), such as in a car  
parked in the sun or under direct sunlight.  
Th e b a t t e ry p a ck h e a t s u p  
During charging or recording, the battery pack heats up. This is caused by energy that  
has been generated and a chemical change that has occurred inside the battery pack.  
This is not cause for concern and is normal.  
Ba t t e ry p a ck ca re  
Remove the battery pack form the camcorder after using it, and keep it in a cool  
place. When the battery pack is installed to the camcorder, a small amount of current  
flows to the camcorder even if the POWER switch is set to OFF. This shortens battery  
life.  
The battery pack is always discharging even when it is not in use after charging.  
Therefore, you should charge the battery pack right before using the camcorder.  
Th e sw it ch o n t h e b a t t e ry p a ck  
This switch is provided so that you can mark the charged battery pack. Set the switch  
to the “green mark” position when charging is completed. (When removed from the  
charging adaptor, the switch exposes the green mark. When removed from your  
camcorder, no mark is indicated.)  
Th e life o f t h e b a t t e ry p a ck  
If the battery indicator flashes rapidly just after turning on the camcorder with a fully  
charged battery pack, the battery pack should be replaced with a new fully charged one.  
Ch a rg in g t e m p e ra t u re  
You should charge batteries at temperatures from 10°C to 30°C (from 50°F to 86°F).  
Lower temperatures require a longer charging time.  
56  
Tip s fo r u sin g t h e b a t t e ry p a ck  
No t e s o n t h e “ In fo LITHIUM b a t t e ry p a ck  
Wh a t is “ In fo LITHIUM”  
The “InfoLITHIUM” is a lithium ion battery pack which can exchange data with  
compatible video equipment about its battery consumption. Sony recommends that you  
use the “InfoLITHIUM” battery pack with video equipment having the  
mark.  
When you use this battery pack with video equipment having the  
mark, the  
video equipment will indicate the remaining battery time in minutes*. However, if you  
use it with video equipment not having this mark, the remaining battery capacity will  
not be indicated in minutes.  
* The indication may not be accurate depending on the condition and environment  
which the equipment is used under.  
How the battery consumption is displayed  
The power consumption of the camcorder changes depending on its use, such as how  
the autofocusing is working.  
While checking the condition of the camcorder, the “InfoLITHIUM” battery pack  
measures the battery consumption and calculates the remaining battery power. If the  
condition changed drastically, the remaining battery indication may suddenly decrease  
or increase by more than 2 minutes.  
Even if 5 to 10 minutes is indicated as the battery remaining time on the LCD screen or  
in the viewfinder, the i indicator may also flash under some condition.  
To obtain more accurate remaining battery indication  
Set the camcorder to recording standby mode and point towards a stationary object. Do  
not move the camcorder for 30 seconds or more.  
If the indication seems incorrect, use up the battery pack and then recharge it fully  
(Full charge1)). Note that if you have used the battery in a hot or cold environment for  
long time, or you have repeated charging many times, the battery pack may not be  
able to show the correct time even after being fully charged.  
After you have used the “InfoLITHIUM” battery pack with an equipment not having  
the  
having the  
mark, make sure that you use up the battery pack on the equipment  
mark and then recharge fully.  
Why the remaining battery indication does not match the continuous recording  
time in the operation manual  
The recording time is affected by the environmental temperature and conditions. The  
recording time becomes very short in a cold environment. The continuous recording  
time in the operation manual is measured under the condition of using a fully charged  
(or normal charged2)) battery back in 25°C (77°F). As the environmental temperature  
and condition are different when you actually use the camcorder, the remaining battery  
time is not same as the continuous recording time in the operation manual.  
1)  
Full charge: Charging for about 1 hour after the CHARGE lamp of the AC power  
adaptor goes off.  
2)  
Normal charge: Charging just until the CHARGE lamp of the AC power adaptor goes  
off.  
No t e s o n ch a rg in g  
A b ra n d -n e w b a t t e ry p a ck  
A brand-new battery pack is not charged. Before using the battery pack, charge it  
completely.  
Re ch a rg e t h e b a t t e ry p a ck w h e n e ve r yo u like  
You do not have to discharge it before recharging. If you charged the battery pack fully  
but you did not use it for a long time, it becomes discharged. Then recharge the battery  
pack before use.  
57  
Tip s fo r u sin g t h e b a t t e ry p a ck  
No t e s o n t h e t e rm in a ls  
If the terminals (metal parts on the back) are not clean, the battery charge  
duration w ill be shortened.  
When the terminals are not clean or when the battery pack has not been used for a long  
time, repeatedly install and remove the battery pack a few times. This improves the  
contact condition. Also, wipe the + and – terminals with a soft cloth or paper.  
Be su re t o o b se rve t h e fo llo w in g  
Keep the battery pack away from fire.  
Keep the battery pack dry.  
Do not open nor try to disassemble the battery pack.  
Do not expose the battery pack to any mechanical shock.  
Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s  
Mo ist u re co n d e n sa t io n  
If the camcorder is brought directly from a cold place to a warm place, moisture may  
condense inside the camcorder, on the surface of the tape, or on the lens. In this  
condition, the tape may stick to the head drum and be damaged or the unit may not  
operate correctly. To prevent possible damage under these circumstances, the  
camcorder is furnished with moisture sensors. Please, take the following precautions.  
In sid e t h e ca m co rd e r  
If there is moisture inside the camcorder, the beep sounds and the { indicator flashes.  
If this happens, none of the functions except cassette ejection will work. Open the  
cassette compartment, turn off the camcorder, and leave it about 1 hour. When 6  
indicator flashes at the same time, the cassette is inserted in the camcorder. Eject the  
cassette, turn off the camcorder, and leave also the cassette about 1 hour. The camcorder  
can be used again if the { indicator does not appear when the power is turned on  
again.  
On t h e le n s  
If moisture condenses on the lens, no indicator appears, but the picture becomes dim.  
Turn off the power and do not use the camcorder for about 1 hour.  
Ho w t o p re ve n t m o ist u re co n d e n sa t io n  
When bringing the camcorder from a cold place to a warm place, put the camcorder in a  
plastic bag and allow it to adapt to room conditions over a period of time.  
(1) Be sure to tightly seal the plastic bag containing the camcorder.  
(2) Remove the bag when the air temperature inside it has reached the  
temperature surrounding it (after about 1 hour).  
58  
Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s  
Vid e o h e a d cle a n in g  
To ensure normal recording and clear pictures, clean the video heads. When the  
v indicator and “  
CLEANING CASSETTE” message appear one after another or  
playback pictures are “noisy” or hardly visible, the video heads may be dirty.  
[a]  
[b]  
[a] Slightly dirty  
[b] Very dirty  
If this happens, clean the video heads with the Sony V8-25CLH cleaning cassette (not  
supplied). After checking the picture, if it is still “noisy,” repeat the cleaning. (Do not  
repeat cleaning more than 5 times in one session.)  
Ca u t io n  
Do not use a commercially available wet-type cleaning cassette. It may damage the  
video heads.  
Note  
If the Sony V8-25CLH cleaning cassette is not available in your area, consult your  
nearest Sony dealer.  
59  
Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s  
Re m o vin g d u st fro m in sid e t h e vie w fin d e r  
(1) Remove the screw with a screwdriver (not supplied). Then, while sliding the  
RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.  
(2) Clean the surface with a commercially available blower.  
2
1
To re a t t a ch t h e e ye cu p  
(1) Align the groove on the eyecup with the • mark on the barrel.  
(2) Turn the eyecup in the direction of the arrow. Then replace the screw.  
2
1
Caution  
Do not remove any other screws.  
You may remove only the screw to remove the eyecup.  
60  
Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s  
Pre ca u t io n s  
Ca m co rd e r o p e ra t io n  
Operate the camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor).  
For DC or AC operation, use the accessories recommended in this manual.  
Should any solid object or liquid get inside the casing, unplug the camcorder and  
have it checked by a Sony dealer before operating it any further.  
Avoid rough handling or mechanical shock. Be particularly careful of the lens.  
Keep the POWER switch set to OFF when not using the camcorder.  
Do not wrap up the camcorder and operate it since heat may build up internally.  
Keep the camcorder away from strong magnetic fields or mechanical vibration.  
Do not push the LCD screen.  
If the camcorder is used in a cold place, a residual image may appear on the LCD  
screen. This is not a malfunction.  
While using the camcorder, the back of the LCD screen may heat up. This is not a  
malfunction.  
On h a n d lin g t a p e s  
Do not insert anything in the small holes on the rear of the cassette. These holes are  
used to sense the type of tape, thickness of tape and if the recording tab is in or out.  
Ca m co rd e r ca re  
When the camcorder is not to be used for a long time, disconnect the power source  
and remove the tape. Periodically turn on the power, operate the camera and player  
sections and play back a tape for about 3 minutes.  
Clean the lens with a soft brush to remove dust. If there are fingerprints on it,  
remove them with a soft cloth.  
Clean the camcorder body with a dry soft cloth, or a soft cloth lightly moistened with  
a mild detergent solution. Do not use any type of solvent which may damage the  
finish.  
If fingerprints or debris make the LCD screen dirty, we recommend using a LCD  
Cleaning Kit (not supplied) to clean the LCD screen.  
Do not let sand get into the camcorder. When you use the camcorder on a sandy  
beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause  
the unit to malfunction, and sometimes this malfunction cannot be repaired.  
AC p o w e r a d a p t o r  
Charging  
Use only a lithium ion type battery pack.  
Place the battery pack on a flat surface without vibration during charging.  
The battery pack will get hot during charging. This is normal.  
61  
Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s  
Others  
Unplug the unit from the mains when not in use for a long time. To disconnect the  
mains lead, pull it out by the plug. Never pull the mains lead itself.  
Do not operate the unit with a damaged cord or if the unit has been dropped or  
damaged.  
Do not bend the mains lead forcibly, or put a heavy object on it. This will damage the  
cord and may cause a fire or electrical shock.  
Be sure that nothing metallic comes into contact with the metal parts of the  
connecting plate. If this happens, a short may occur and the unit may be damaged.  
Always keep the metal contacts clean.  
Do not disassemble the unit.  
Do not apply mechanical shock or drop the unit.  
While the unit is in use, particularly during charging, keep it away from AM  
receivers and video equipment because it will disturb AM reception and video  
operation.  
The unit becomes warm while in use. This is normal.  
Do not place the unit in locations that are:  
- Extremely hot or cold  
- Dusty or dirty  
- Very humid  
- Vibrating  
No t e s o n d ry b a t t e rie s  
To avoid possible damage from battery leakage or corrosion, observe the following.  
Be sure to insert the batteries in the correct direction.  
Dry batteries are not rechargeable.  
Do not use a combination of new and old batteries.  
Do not use different types of batteries.  
The batteries slowly discharge while not in use.  
Do not use a battery that is leaking.  
If battery leakage occurred  
Wipe off the liquid in the battery case carefully before replacing the batteries.  
If you touch the liquid, wash it off with water.  
If the liquid get into your eyes, wash your eyes with a lot of water and then consult a  
doctor.  
If any difficulty should arise, unplug the unit and contact your nearest Sony dealer.  
62  
Usin g yo u r ca m co rd e r a b ro a d  
Each country or area has its own electric and TV colour systems. Before using your  
camcorder abroad, check the following points.  
Po w e r so u rce s  
You can use your camcorder in any country or area with the supplied AC power  
adaptor within 110 V to 240 V AC, 50/ 60 Hz.  
Diffe re n ce in co lo u r syst e m s  
This camcorder is a PAL system based camcorder. If you want to view the playback  
picture on a TV, it must be a PAL system based TV.  
Check the following list.  
PAL system  
Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Great  
Britain, Holland, Hong Kong, Italy, Kuwait, Malaysia, New Zealand, Norway, Portugal,  
Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, etc.  
PAL-M system  
Brazil  
PAL-N system  
Argentina, Paraguay, Uruguay  
NTSC system  
Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica,  
Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela,  
etc.  
SECAM system  
Bulgaria, France, Guyana, Hungary, Iran, Iraq, Monaco, Poland, Russia, Ukraine, etc.  
63  
Tro u b le ch e ck  
If you run into any problem using the camcorder, use the following table to  
troubleshoot the problem. Should the difficulty persist, disconnect the power source  
and contact your Sony dealer or local authorized Sony service facility.  
Ca m co rd e r  
Pow er  
Symptom  
Cause and/or Corrective Action  
The battery pack is not installed.  
The power is not on.  
m Install the battery pack. (p. 8)  
The battery is dead.  
m Use a charged battery pack. (p. 6)  
The AC power adaptor is not connected to the mains.  
m Connect the AC power adaptor to the mains. (p. 24)  
While being operated in CAMERA mode, the camcorder  
has been in Standby mode for more than 5 minutes.  
m Turn STANDBY down once and then up again. (p. 11)  
The battery is dead.  
The power goes off.  
m Use a charged battery pack. (p. 6)  
The camcorder does not operate when using a battery pack  
that is not an “InfoLITHIUM” battery pack.  
m Use an “InfoLITHIUM” battery pack. (p. 6)  
The ambient temperature is too low. (p. 55)  
The battery pack has not been charged fully.  
m Charge the battery pack again. (p. 6)  
The battery pack is completely dead, and cannot be  
recharged.  
The battery pack is quickly  
discharged.  
m Use another battery pack. (p. 55)  
Operation  
Cause and/or Corrective Action  
Symptom  
The tape is stuck to the drum.  
m Eject the tape. (p. 9)  
The tape has run out.  
START/ STOP does not operate.  
m Rewind the tape or use a new one. (p. 20)  
The POWER switch is set to VTR.  
m Set it to CAMERA. (p. 10)  
The tab on the cassette is out (red).  
m Use a new tape or slide the tab. (p.9)  
The START/ STOP MODE switch is set to 5SEC or  
.
Recording stops in a few seconds.  
m Set it to  
. (p. 14)  
64  
Tro u b le ch e ck  
Symptom  
Cause and/or Corrective Action  
The cassette cannot be removed  
from the holder.  
The battery is dead.  
m Use a charged battery pack or the AC power adaptor.  
(p. 6, 24)  
{ and 6 indicators flash and no  
function except for cassette  
ejection works.  
Moisture condensation has occurred.  
m Remove the cassette and leave the camcorder for at least  
1 hour. (p. 58)  
The date or time indicator is  
flashing.  
You pressed DATE and TIME together for more than 2  
seconds.  
m The camcorder is not malfunctioning. You may start  
recording. Flashing will stop soon.  
The lithium battery is weak or dead.  
m Replace the lithium battery with a new one. (p. 52)  
The POWER switch is set to CAMERA or OFF.  
m Set it to VTR.  
The tape does not move when a  
video control button is pressed.  
The tape has run out.  
m Rewind the tape or use a new one. (p. 20)  
STEADY SHOT is set to OFF.  
The Steady Shot function does not  
activate.  
m Set STEADY SHOT to ON. (p. 41)  
The Steady Shot function does not work when the wide  
mode is set to 16:9 FULL.  
The autofocusing function does  
not work.  
FOCUS is set to MANUAL.  
m Set it to AUTO. (p. 35)  
Shooting conditions are not suitable for autofocus.  
m Set FOCUS to MANUAL to focus manually. (p. 35)  
The fader function does not work.  
The START/ STOP MODE switch is set to 5SEC or  
m Set it to . (p. 14)  
.
A title is displayed.  
m Stop superimposing the title. (p. 42)  
The stereo tape is played back with HiFi SOUND set to 1  
No sound or only a low sound is  
heard when playing back a tape.  
or 2 in the menu system.  
m Set to STEREO in the menu system. (p. 29)  
The picture has been recorded with WIND set to ON in the  
menu system.  
Excessive high-pitched sound is  
heard.  
m When there is no wind, set it to OFF. (p. 27)  
Reset the date and time. (p. 53)  
The date or time indicator  
disappears.  
(to be continued)  
65  
Tro u b le ch e ck  
Picture  
Symptom  
Cause and/or Corrective Action  
The image on the viewfinder  
screen is not clear.  
The viewfinder lens is not adjusted.  
m Adjust the viewfinder lens. (p. 11)  
The contrast between the subject and background is too  
high. The camcorder is not malfunctioning.  
m Change locations.  
A vertical band appears when a  
subject such as lights or a candle  
flame is shot against a dark  
background.  
A vertical band appears when  
shooting a very bright subject.  
The playback picture is not clear.  
The camcorder is not malfunctioning.  
EDIT is set to ON in the menu system.  
m Set it to OFF. (p. 29)  
The video heads may be dirty.  
The picture is “noisy”.  
m Clean the heads using the Sony V8-25CLH cleaning  
cassette (not supplied). (p. 59)  
The picture does not appear in the  
viewfinder.  
The LCD panel is open.  
m Close the LCD panel. (p. 15)  
An unknown picture is displayed  
in the viewfinder or on the LCD  
screen.  
If 10 minutes elapse after you set the POWER switch to  
CAMERA without inserting a cassette, the camcorder  
automatically starts the demonstration or DEMO is set to  
ON in the menu system.  
m Insert the cassette and the demonstration stops.  
You can deactivate the demonstration. (p. 28)  
Incorporated fluorescent tube is worn out.  
m Please contact your nearest Sony dealer.  
The self-diagnosis function is activated.  
m Check the code and solve the problem. (p. 68)  
The picture does not appear on  
the LCD screen.  
The five digit code appears.  
Others  
Cause and/or Corrective Action  
Symptom  
The supplied Remote  
Commander does not work.  
COMMANDER is set to OFF in the menu system.  
m Set it to ON. (p. 27)  
Something is blocking the infrared rays.  
m Remove the obstacle.  
The batteries are not inserted with the correct polarity.  
m Insert the batteries with the correct polarity. (p. 74)  
The batteries are dead.  
m Insert new ones. (p. 74)  
There is dust in the viewfinder.  
The picture from a TV or VCR  
does not appear even when the  
camcorder is connected to outputs  
on the TV or VCR.  
Detach the eyecup and clean the viewfinder lens. (p. 60)  
DISPLAY is set to V-OUT/ LCD in the menu system.  
m Set it to LCD. (p. 27)  
66  
Tro u b le ch e ck  
AC p o w e r a d a p t o r  
Symptom  
Corrective Actions  
The VTR/ CAMERA or CHARGE • Disconnect the mains lead. After about 1 minute, reconnect  
lamp does not light.  
the mains lead.  
The CHARGE lamp flashes.  
• See the following chart.  
Wh e n t h e CHARGE la m p fla sh e s  
Check through the following chart.  
Remove the battery pack from the AC  
power adaptor. Then install the same  
battery pack again.  
$
$
When the CHARGE lamp does not flash  
again  
When the CHARGE lamp flashes again  
Install another battery pack.  
If the CHARGE lamp lights up and goes  
out after a while, there is no problem.*  
$
$
When the CHARGE lamp does not flash  
again  
When the CHARGE lamp flashes again  
The problem is with the AC power adaptor.  
If the CHARGE lamp lights up and goes  
out after a while, the problem is with the  
battery pack installed first.  
$
Please contact your nearest Sony dealer in  
connection with the problem.  
* If you use a battery pack which you have just bought or which has been left unused  
for a long time, the CHARGE lamp may flash at the first charging. This does not  
indicate a problem. Repeat again to charge with the same battery pack.  
67  
Tro u b le ch e ck  
Se lf-d ia g n o sis fu n ct io n  
If the self-diagnosis function works to prevent the  
S P  
H
STBY  
C:21:00  
camcorder from malfunctioning, a five-digit service  
number (combination of a letter and figures) flashes.  
In this case, check the following table.  
53 min.  
First three digits  
Cause and/or Corrective Action  
C21  
C22  
C23  
C31  
Moisture condensation has occurred.  
m Remove the cassette and leave the camcorder for at least  
1 hour. (p. 58)  
The video heads are dirty.  
m Clean the heads using the Sony V8-25CLH cleaning  
cassette (not supplied). (p. 59)  
The camcorder does not operate when using a battery pack  
that is not an “InfoLITHIUM” battery pack.  
m Use an “InfoLITHIUM” battery. (p. 6)  
To prevent the camcorder from malfunctioning, the self-  
diagnosis function has worked.  
m Remove the cassette and insert it again, then operate the  
camcorder. (p. 9)  
C32  
To prevent the camcorder from malfunctioning, the self-  
diagnosis function has worked.  
m Disconnect the mains lead of the AC power adaptor or  
remove the battery pack. After reinstalling the power  
source, operate the camcorder.  
E61  
E62  
To prevent the camcorder from malfunctioning, the self-  
diagnosis function has worked.  
m When you contact your Sony dealer or local authorized  
Sony service facility, inform the service number with  
five digits. (example: E:61:10)  
If a difficulty persists after checking the problem a few times, contact your Sony dealer  
or local authorized Sony service facility.  
68  
Sp e cifica t io n s  
In p u t a n d o u t p u t  
co n n e ct o rs  
AC p o w e r a d a p t o r  
Vid e o ca m e ra  
re co rd e r  
Pow er requirements  
110 - 240 V AC, 50/ 60 Hz  
Pow er consumption  
25 W  
Output voltage  
DC OUT: 8.4 V, 1.9 A in operating  
S video output/monitor input  
4-pin mini DIN  
Luminance signal: 1 Vp-p, 75  
ohms, unbalanced  
Chrominance signal: 0,3 Vp-p, 75  
ohms, unbalanced  
Video input/output  
Phono jack, 1 Vp-p, 75 ohms,  
unbalanced  
Syst e m  
Video recording system  
Two rotary heads, Helical  
scanning FM system  
Audio recording system  
Rotary heads, FM system  
Video signal  
mode  
Battery charge terminal: 8.4 V, 1.4  
A in charge mode  
Application  
Sony battery packs NP-F530,  
NP-F730, NP-F930 lituium ion  
type  
Operating temperature  
0°C to 40°C (32°F to 104°F)  
Storage temperature  
–20°C to +60°C (–4°F to +140°F)  
Dimensions (Approx.)  
81 x 45 x 163 mm (3 1/ 4 x 1 13/ 16  
x 6 1/ 2 in.) (w/ h/ d) including  
projecting parts and controls  
PAL colour, CCIR standards  
Usable cassette  
Audio input/output  
Phono jacks (2: stereo L and R)  
327 mV, (at output impedance  
47 kilohms) impedance less than  
2.2 kilohms  
RFU DC OUT  
Special minijack, DC 5V  
Headphone jack  
Stereo minijack (ø 3.5 mm)  
LANC control jack  
Stereo mini-minijack (ø 2.5 mm)  
MIC jack  
Minijack, 0.388 mV low  
impedance with 2.5 to 3.0 V DC,  
output impedance 6.8 kilohms (ø  
3.5 mm)  
Stereo type  
Speaker  
Dynamic speaker  
Intelligent accessory shoe  
8-pin connector  
8mm video format cassette  
(Hi8 or standard 8)  
Recording / Playback time  
(using 90 min. cassette)  
SP mode: 1 hour and 30 minutes  
LP mode: 3 hours  
Fastforw ard/rew ind time (using  
90 min. cassette)  
Approx. 4 min.  
Image device  
CCD (Charge Coupled Device)  
View finder  
Electronic viewfinder:  
Mass (Approx.)  
560 g (1 lb 3 oz)  
Design and specifications are  
subject to change without notice.  
Monochrome  
Lens  
Combined power zoom lens  
Filter diameter 37 mm (1 7/ 16 in.)  
15 x (Optical), 180x (Digital)  
Focal distance  
4.1 - 61.5 mm (3/ 16 - 2 1/ 2 in.)  
47 - 705 mm (1 7/ 8 - 27 7/ 8 in.)  
when converted to a 35 mm still  
camera  
Colour temperature  
Auto  
Ge n e ra l  
Pow er requirements  
7.2 V (battery pack)  
8.4 V (AC power adaptor)  
Minimum illumination  
0.7 lux (F 1.4)  
Illumination range  
0.7 lux to 100,000 lux  
Recommended illumination  
More than 100 lux  
Average pow er consumption  
During camera recording using  
LCD: 4.4 W  
Viewfinder: 3.5 W  
Operating temperature  
0°C to 40°C (32°F to 104°F)  
Storage temperature  
–20°C to +60°C (–4°F to +140°F)  
LCD scre e n  
Dimensions (Approx.)  
106 x 108 x 200 mm  
(4 1/ 4 x 4 3/ 8 x 7 7/ 8 in.) (w/ h/  
d)  
Mass (Approx.)  
900 g (1 lb 15 oz)  
excluding the battery pack,  
lithium battery, cassette and  
shoulder strap  
Picture  
2.5 inches measured diagonally  
50.6.x 37.7 mm (2 x 1 1/ 2 in.)  
On-screen display  
TN LCD/ TFT active matrix  
method  
Total dot number  
84,260 (383 x 220)  
1.1 kg (2 lb 8 oz)  
including the battery pack NP-  
F530, lithium battery CR2025,  
cassette and shoulder strap  
Microphone  
Stereo type  
Supplied accessories  
See page 5.  
69  
Id e n t ifyin g t h e p a rt s  
8
9
!º  
1
!¡  
2
!™  
!£  
!¢  
3
4
5
6
7
!∞  
!§  
!¶  
8 View finder lens adjustment ring  
1 LCD BRIGHT button (p. 15)  
2 Display w indow (p. 76)  
3 FADER button (p. 30)  
4 NEAR/FAR dial (p. 36)  
5 FOCUS sw itch (p. 36)  
(p. 11)  
9 Eyecup RELEASE knob (p. 60)  
Pow er zoom lever (p. 13)  
BATT RELEASE (PUSH) lever (p. 8)  
!™ Hook for shoulder strap (p. 75)  
STANDBY sw itch (p. 10)  
6 Tripod receptacle (p. 17)  
Make sure that the length of the tripod  
screw is less than 6.5 mm (9/ 32 inch)  
otherwise, you cannot attach the tripod  
securely and the screw may damage the  
camcorder.  
START/STOP button (p. 10)  
!∞ Battery mounting surface  
Hook for shoulder strap (p. 75)  
VOLUME button (p. 20)  
7 OPEN button (p. 15)  
70  
Id e n t ifyin g t h e p a rt s  
@∞  
@§  
!•  
!ª  
@º  
@¡  
@™  
@£  
@¶  
@•  
@ª  
@¢  
#º  
#¡  
!• EJECT sw itch (p. 9)  
@∞ EDITSEARCH button (p. 19)  
S VIDEO jack (p. 47)  
Lens cover  
LANC l control jack  
l stands for Local Application Control  
Bus System. The l control jack is used  
for controlling the tape transport of  
video equipment and peripherals  
connected to it. This jack has the same  
function as the jack indicated as  
CONTROL L or REMOTE.  
@• MIC jack (PLUG IN POWER)  
Connect an external microphone (not  
supplied). This jack also accepts a  
“plug-in-power” microphone.  
Remote sensor (p. 75)  
Aim the Remote Commander here for  
remote control.  
Cassette compartment (p. 9)  
Grip strap (p. 17)  
Microphone  
@™ RFU DC OUT (RFU adaptor DC output)  
jack (p. 47)  
Camera recording/battery lamp (p. 10)  
VIDEO/AUDIO jacks (p. 47)  
2 (headphones) jack (p. 21)  
71  
Id e n t ifyin g t h e Pa rt s  
#¶  
#•  
#™  
#£  
#ª  
$º  
$¡  
#¢  
#∞  
#§  
STEADY SHOT sw itch (p. 41)  
#• START/STOP MODE sw itch (p. 14)  
COUNTER RESET button (p. 12)  
END SEARCH button (p. 23)  
MENU button (p. 26)  
#™ Intelligent accessory shoe  
Speaker (p. 21)  
LCD screen (p. 15)  
#∞ Lithium battery compartment (p. 52)  
PICTURE EFFECT button (p. 33)  
Note on the intelligent accessory shoe  
Supplies power to optional accessories such as a video light or microphone. The  
intelligent accessory shoe is linked to the STANDBY switch, allowing you to turn on  
and off the power supplied by the shoe. Refer to the instruction manual of the accessory  
for further information. To connect an accessory, press down and push it to the end,  
and then tighten the screw. To remove an accessory, loosen the screw, and then press  
down and pull out the accessory.  
72  
Id e n t ifyin g t h e Pa rt s  
$•  
$™  
$£  
$¢  
$ª  
%º  
%¡  
%™  
$∞  
$§  
$¶  
$• Video control buttons (p. 20)  
π STOP (stop)  
$™ POWER sw itch (p. 10)  
TIME button (p. 45)  
DATE button (p. 45)  
$∞ DISPLAY button (p. 21)  
16:9 WIDE button (p. 31)  
TITLE button (p. 42)  
0 REW (rewind)  
· PLAY (playback)  
) FF (fastforward)  
P PAUSE (pause)  
r REC (recording)  
BACK LIGHT button (p. 39)  
PROGRAM AE button (p. 37)  
EXPOSURE button (p. 40)  
%™ Control dial (p. 34)  
73  
Id e n t ifyin g t h e p a rt s  
Re m o t e Co m m a n d e r  
The buttons that have the same name on the Remote Commander as on the camcorder  
function identically.  
1
2
4
5
3
1 Transmitter  
3 DISPLAY button (p. 21)  
Point toward the remote sensor to  
control the camcorder after turning on  
the camcorder.  
4 START/STOP button (p. 10)  
5 Pow er zoom button (p. 13)  
2 Video control buttons (p. 20)  
To p re p a re t h e Re m o t e Co m m a n d e r  
Insert two R6 (size AA) batteries by matching the + and – on the batteries to the  
diagram inside the battery compartment.  
Note on battery life  
The batteries for the Remote Commander last about 6 months under normal operation.  
When the batteries become weak or dead, the Remote Commander does not work.  
To avoid damage from possible battery leakage  
Remove the batteries when you will not use the Remote Commander for a long time.  
74  
Id e n t ifyin g t h e p a rt s  
To u se t h e Re m o t e Co m m a n d e r  
Make sure that the COMMANDER is set to ON in the menu system on the camcorder.  
MENU  
COMMANDER  
ON  
OFF  
SEL/  
PUSH  
EXEC  
SEL/  
PUSH  
EXEC  
[MENU]: END  
Re m o t e co n t ro l d ire ct io n  
5°  
5 m  
20°  
20°  
15°  
Notes on the Remote Commander  
Keep the remote sensor away from strong light sources such as direct sunlight or  
illumination. Otherwise, the remote control may not be effective.  
Be sure that there is no obstacle between the remote sensor on the camcorder and the  
Remote Commander.  
This camcorder works in commander mode VTR 2. The commander modes (1, 2 and  
3) are used to distinguish this camcorder from other Sony VCRs to avoid remote  
control misoperation. If you use another Sony VCR in commander mode VTR 2, we  
recommend you change the commander mode or cover the remote sensor of the VCR  
with black paper.  
At t a ch in g t h e sh o u ld e r st ra p  
Attach the supplied shoulder strap to the hooks for the shoulder strap .  
1
2
3
75  
Id e n t ifyin g t h e p a rt s  
Op e ra t io n in d ica t o rs  
Vie w fin d e r  
1
2
3
!™  
!£  
!¢  
!∞  
!§  
!¶  
!•  
!ª  
@º  
@¡  
@™  
!º  
!£  
!¢  
@º  
@£  
@¢  
L P  
A
W
STBY  
4
5
6
7
8
9
!º  
!¡  
T
ORC  
TC  
DC  
00:00:00  
FADER  
CINEMA  
MOSAIC  
SP  
LP  
END  
SEARCH  
VOL  
.......  
40 min.  
III  
AUTO DATE  
12:00:00  
1 WIND indicator (p. 27)  
Tape counter (p. 12)/Self-diagnosis  
functions indicator (p. 68)  
2 Manual focusing (p. 36)  
Remaining tape indicator  
3 PROGRAM AE indicator (p. 37)  
4 Steady Shot indicator (p. 41)  
5 Backlight indicator (p. 39)  
6 FADER indicator (p. 30)  
5min  
0min  
!• END SEARCH indicator (p. 23)  
Exposure indicator (p. 40)/Zoom  
indicator (p. 13)  
7 Wide mode indicator (p. 31)  
8 PICTURE EFFECT indicator (p. 33)  
Remaining battery indicator  
9 LCD BRIGHT indicator (p. 15)/VOLUME  
Auto DATE indicator (p. 45)  
@™ Date or time indicator (p. 45)  
ORC indicator (p. 46)  
indicator (p. 20)  
Warning indicators (p. 77)  
Recording lamp (p. 10)  
Date or time indicator (p. 45)/  
Tape counter indicator (p. 12)/  
Self-diagnosis functions indicators  
(p. 68)  
!™ Mirror mode indicator (p. 16)  
Playing back or recording in Hi8  
format (p. 54)  
Recording mode indicator (p. 12)  
!∞ Video control mode (p. 20)  
76  
Wa rn in g in d ica t o rs  
If indicators flash in the viewfinder or in the display window, check the following:  
: you can hear the beep sound when the BEEP is set to ON.  
1
4
7
2
5
8
3
6
9
0min  
5min  
C:21:00  
CLEANING  
CASSETTE  
C:31:10  
4
7
1997  
1 The battery is w eak or dead.  
Slow flashing: The battery is weak.  
Fast flashing: The battery is dead.  
2 The tape is near the end.  
The flashing is slow.  
6 Moisture condensation has occurred.  
7 The video heads may be  
contaminated.  
8 Some other trouble has occurred.  
Use the self-diagnosis function (p. 68).  
If the display does not disappear contact  
your Sony dealer or local authorized Sony  
service facility.  
3 The tape has run out.  
The flashing becomes rapid.  
4 No tape has been inserted.  
5 The tab on the tape is out (red).  
9 The lithium battery is w eak or is not  
installed.  
To w a t ch t h e d e m o n st ra t io n  
You can start the demonstration by setting DEMO MODE in the menu system.  
You can also start the demonstration by the following operation.  
To enter demo mode  
(1) Eject the cassette and set the POWER switch to VTR.  
(2) Turn STANDBY up to STANDBY.  
(3) While holding down · set the POWER switch to CAMERA.  
To exit demo mode  
(1) Set the POWER switch to VTR.  
(2) Turn STANDBY up to STANDBY.  
(3) While holding down π set the POWER switch to CAMERA.  
77  
In d e x  
A, B  
F, G, H  
S
Adjusting viewfinder ........ 11  
Fade-in/ fade-out ............... 30  
Self-diagnosis function ...... 68  
Shoulder strap .................... 75  
Skip scan ............................. 22  
Standby mode .................... 10  
STEADY SHOT .................. 41  
AFM HiFi Sound .......... 29, 54  
ANTI GROUND  
SHOOTING ......................... 14  
FADER ................................ 30  
I, J, K, L  
LANC .................................. 71  
Lithium battery .................. 52  
Auto focus ........................... 35  
AUTO DATE ....................... 28  
Backlight .............................. 39  
Beep ..................................... 12  
T, U, V  
Tape counter ....................... 12  
TBC ....................................... 29  
Title ....................................... 42  
Tripod mounting ............... 17  
Trouble check ..................... 64  
M, N  
Mains ................................... 24  
Manual focus ...................... 36  
Menu system ...................... 26  
MIC (microphone) jack ..... 71  
C, D  
Camera recording .............. 10  
Car battery .......................... 25  
Charging battery .................. 6  
Cleaning video heads ........ 59  
Clock set .............................. 53  
Connection .......................... 47  
COUNTER RESET ............. 12  
DATE/ TIME ...................... 45  
DEMO ............................ 28, 77  
Digital zoom ....................... 13  
DISPLAY ............................. 21  
DNR ...................................... 29  
W, X, Y, Z  
O, P  
Watching on a TV ............... 47  
WIDE mode ......................... 31  
WIND .................................. 27  
Zoom ................................... 13  
ORC ...................................... 46  
PICTURE EFFECT ............. 33  
Playback pause ................... 22  
Power sources .................... 24  
Power zoom ........................ 13  
PROGRAM AE ................... 37  
Q, R  
Rec review .......................... 19  
Recording mode .................. 27  
Remote control jack  
E
EDIT ..................................... 29  
Editing ................................. 48  
EDITSEARCH .................... 19  
END SEARCH .................... 23  
Exposure .............................. 40  
(LANC) ............................ 71  
78  
Sony Corporation Printed in Japan  

Victor Technology 1100 2 User Manual
Uniden Camera Accessories UBRC13 User Manual
Sony NEX FS100UK User Manual
Sony LCS HCE User Manual
Sony DCR SX20 User Manual
Sony DCR DVD508 User Manual
Sony Car Video System LDP 1000A User Manual
Silvercrest CDV 710 User Manual
Sanyo NV E7000 User Manual
Sanyo FXCD 550 User Manual