Sanyo FXCD 550 User Manual

OPERATING  
INSTRUCTIONS  
FXCD-550  
Full Panel Detachable  
FM Stereo/AM Receiver  
Auto Reverse Cassette Player  
Compact Disc Player  
ISO Mounting with Removable Trim Ring  
(English)  
GB  
E
OPERATING INSTRUCTIONS. . . . . . . . . . . . . . . . . . . 1~25  
(Español)  
LIBRITO DE INSTRUCCIONES . . . . . . . . . . . . . . . . . 26~49  
English  
CONTENTS  
COMPACT DISC CARE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
DIGITAL DISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
DETACHABLE FRONT PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
GENERAL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
RADIO OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
TAPE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
CD OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
ERROR SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
CLOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
HINTS FOR PROPER AND SAFE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
ACCESSORIES AND HARDWARE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
UNIT REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
ELECTRICAL CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
LINE OUT CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
NOTE  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy and, If not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
CAUTION  
This unit is designed to operate on 12 volts DC, NEGATIVE ground electrical systems only.  
When fuse replacement is necessary, use only a 15 amp fuse. Do not replace with a higher rated fuse.  
If the fuse blows often, carefully check all electrical connections for any short circuits and have your  
car's voltage regulator checked also.  
Do not install the unit where it will be exposed to direct sunlight or hot air discharged from the car heater.  
Do not expose the unit to water or moisture.  
To avoid damaging the unit, never insert anything other than a compact disc into the disc slot.  
This unit should not be adjusted or repaired by anyone except qualified service personnel.  
If servicing is required, return the unit to an authorized SANYO mobile audio dealer.  
Use of controls or adjustments or performance of procedures other than those specified herein may  
result in hazardous radiation exposure.  
Changes or modifications not expressly approved by Sanyo may void the user's authority to operate  
this equipment.  
-2-  
COMPACT DISC CARE  
Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping some tracks  
during play.  
This unit has been designed to play compact discs  
bearing the identification logo shown on the left.  
Discs bearing other types of identification logos  
may not play properly.  
Playback may not be possible due to the  
characteristics of the CD recorder or the CD-R/RW  
used, or due to scratches or dirt on the CD.  
For some CD-R/RWs, depending on the quality  
of their recording or storage media used, playback  
may not be possible due to deterioration of  
recorded of material.  
Do not use non-conventional discs such as  
heart-shaped, octagonal discs, etc.  
The player could be damaged.  
Fingerprints and dust should be carefully wiped  
from the signal surface of the disc (glossy side) with  
a soft cloth.  
Wipe in a straight motion from the inside to the  
outside of the disc. Unlike conventional records,  
the compact disc has no grooves to collect dust and  
Label Side  
debris. Small dust particles will have no effect on  
reproduction quality.  
Do not insert a disc which is cracked into the unit.  
Do not apply paper or write anything on the disc.  
To prevent warping the disc, do not expose it to  
direct sunlight, high humidity or high temperatures  
for extended periods.  
-3-  
Never use chemicals such as record cleaning  
sprays, antistatic sprays or fluids, benzene or  
thinner to clean compact discs. These chemicals  
will permanently damage the plastic surface of  
the disc.  
When not using the disc player for extended  
periods, remove the compact disc and return it to  
the plastic storage case. This will protect the disc  
from dust and exposure to the sun.  
Benzene Thinner Cleaning spray  
Mixed-mode CDs  
This product can only play audio tracks on mixed-mode CDs.  
The initial track contains non-audio data, and so it does not produce any sound.  
Playback will start from the next track.  
(Mixed-mode CDs are CDs which contain both non-audio data and audio tracks.)  
CDs containing copy control protection technology.  
It is possible that some CDs with copy control protection (added to prevent computer  
duplication) may not play on this unit.  
This is due to the CD with copy control protection not conforming to CD standards and is  
not due to a malfunction of this unit.  
If there are any problems playing a CD with copy control protection, consult the store where  
the CD was purchased.  
-4-  
DIGITAL DISPLAY  
Automatic Music Select System (AMSS)  
Metal Display  
Tape playing direction  
BASSXPANDER Auto Travel Preset (ATP)  
Disc in  
AM Band  
FM Bands  
Radio Frequency, Time,  
CD Track Number,  
Preset Channel,  
Auto Travel  
Audio Control Selection,  
Scan Play, Repeat Play,  
Shuffle Play, Error Signs,  
no Cd, no TAPE,  
Preset Channel  
TAPE play  
-5-  
DETACHABLE FRONT PANEL  
The front panel is designed to be removable for antitheft purposes.  
It is recommended that you remove and carry the front panel with you when you leave your car.  
A carrying case is provided with the unit for this purpose.  
RELEASE KNOB  
HOW TO DETACH THE FRONT PANEL  
1
Press the release knob (REL) to release the front panel.  
2
Pull the entire panel to remove it from the unit.  
HOW TO REPLACE THE FRONT PANEL  
FRONT PANEL  
Align the right side of the panel with the stopper,  
and then push the left side of the panel into the  
unit until it clicks.  
Note  
The unit will not operate if it is installed incorrectly.  
FRONT PANEL FIXING  
The front panel can be installed so that it cannot be removed  
to prevent theft or loss. Using the screw included with the  
accessory kit, install it to the right side of the front panel.  
CAUTION  
Do not attempt to remove the panel in a manner other than that described above.  
When installing the panel, do not force it into the unit.  
Do not touch the connection terminals of the panel or the unit. It may cause poor  
contact.  
Use a clean, dry cloth when cleaning the terminals.  
Keep the panel out of direct sunlight and high temperatures.  
Prevent the panel from coming into contact with benzene, thinner, or insecticides.  
Do not drop the panel.  
Do not attempt to remove the radio front panel that takes your attention away from safety  
driving you vehicle.  
-6-  
GENERAL OPERATION  
4
8
7
6 5  
1
2
3
TURNING THE POWER ON........................................ 1  
Install the front panel and press the ON/OFF button when ACC is on.  
TURNING THE POWER OFF ...................................... 1  
Press the ON/OFF button to stop the current operation.  
The button dims when the power is off (ACC on).  
ELECTRONIC CONTROLS......................................... 2, 3  
Press the SEL button to select the audio functions as shown in the table below.  
To adjust the volume, press the  
or  
buttons  
while in the volume mode. To adjust the bass, treble,  
balance or fader, press the SEL button to select the desired operation, then press the  
or  
buttons.  
Note  
While no other mode is displayed, the the  
or  
(Min)  
buttons function as a volume control.  
MODE  
(Max)  
Down  
Down  
-5  
-5  
Up  
5
5
bAS (bass)  
Up  
TRE (treble)  
bAL (balance)  
FAd (fader)  
VOL (volume)  
Left  
L15  
Right  
R15  
Rear  
R15  
0
Front  
Up  
F15  
50  
Down  
ELECTRONIC CONTROL RESET................................ 2  
Press the SEL button for about 3 seconds until the unit beeps, the audio controls, except for volume, will  
be reset.  
-7-  
BASSXPANDER (BASX) - 1/2 .....................................4  
BASSXPANDER is a dual-mode sound equalization feature. Press button  
mode as follows;  
to select the BASSXPANDER  
b-1  
b-2  
OFF  
BASSXPANDER offers two preset mode: b-1 enhances the low and high frequencies, while b-2 enhances  
the low frequencies and reduces the high frequencies.  
RADIO SELECTION BUTTON (BND) ...........................5  
Press the BND button to switch from CD player, or tape mode to radio.  
Each time the button is pressed, the function changes as shown below.  
FMI  
FMII  
AM  
TAPE SELECTION BUTTON (TAPE)............................6  
Press the TAPE button with a tape slot to switch from radio or CD player mode to tape mode.  
CD SELECTION BUTTON (CD) ...................................7  
Press the CD button with a CD slot to switch from radio or tape mode to CD player mode.  
CLOCK BUTTON (DISP) ............................................8  
Press the DISP button to switch between the clock and audio display. When an audio function is  
performed while the time display is selected, the audio display will appear for 5 seconds, then the display  
will return to the time mode.  
TO CANCEL THE BEEP TONES .................................1, 2  
1
To cancel the beep tones, press the SEL button and ON/OFF button simultaneously until b : OFF”  
is displayed.  
2
To turn on the beep tones again, perform the same procedure. The beep tones are set and b : Onis  
displayed.  
-8-  
RADIO OPERATION  
2
4
1
3
SELECTING RADIO MODE ........................................ 1  
Press the BND button to switch from CD player or tape mode to the radio.  
Each time the BND button is pressed, the selected band changes as shown below.  
FMI  
FMII  
AM  
RADIO TUNING ........................................................ 2  
Automatic tuning ............Press the FF + or - REW button for more than 0.5 second until it beeps twice if  
the beep tones are on. When the button is released, the system will start  
automatic tuning and stop at the next receivable station.  
Manual tuning ................To select higher frequency stations, press the FF + button for less than 0.5  
seconds.To select lower frequency stations, press the - REW button for less than  
0.5 seconds. To quickly scan up or down in frequency, press and hold the FF +  
or - REW button. Release the button when the display approaches the desired  
frequency, then press and release the button repeatedly until the desired  
frequency is displayed.  
STORING PRESET STATIONS ................................... 3  
The preset buttons can be used to store 6 stations in each band (FMI, FMII and AM) for convenient  
access to your favorite stations.  
1
2
Programming stations.....  
Select the desired band, then tune in the station you want to store in memory.  
Press and hold one of the preset buttons for more than 2 seconds.  
1
2
Repeat steps  
and  
to program additional stations.  
Quick tuning.................... Select the desired band, then press one of the six preset buttons.  
-9-  
ATP (AUTO TRAVEL PRESET) OPERATION................4  
The Auto Travel Preset function searches for and memorizes the 6 strongest stations in one of the two  
bands (FM, AM) in the order of signal strength.  
This feature is useful when you are driving in an unfamiliar location and want to memorize local stations  
without changing the standard preset stations.  
A total of 12 stations (6 FM and 6 AM) can be programmed.  
1
2
To set the stations...............................  
Select the desired band.  
Press and hold the ATP button for more than 2 seconds.  
ATPappears in the display.  
When the stations have been memorized, scanning stops and the  
strongest station is selected.  
1
2
Quick Tuning of ATP Stations .................  
Select the desired band.  
Press the ATP button if the ATPindicator does not appear in  
the display.  
3
While ATP is illuminated, press the ATP button and the unit  
seeks ATP1-6. If there is no preset ATP, - 0 - appears in the  
display.  
To scan programmed stations............. See PRESET-SCAN-BUTTON OPERATION.  
Notes  
If no station can be received, - 0 -appears in the display.  
If fewer than 6 stations can be received, the system will memorize as many stations as  
possible, then select the strongest one.  
If ATP mode is selected in FMII band, FMI ATP mode is selected.  
To cancel the ATP, press the BND button . When ATP is canceled, the ATP indicator disappears and ATP  
mode is canceled.  
PRESET-SCAN-BUTTON OPERATION ........................1, 4  
This function scans each of the preset stations stored in the selected band (both manual preset and  
auto travel presets).  
1
2
Select the desired band or ATP mode.  
Press the BND button for FMI, FMII or AM. Press the ATP button to select the ATP mode.  
Press the BND button for more than 2 seconds. The system will select and receive each preset station  
for five-second.  
3
To stop scanning and retain the station currently selected, press the BND button again during this  
five-second period.  
-10-  
TAPE OPERATION  
3
4
1
5
2
9 8  
7 6  
LOADING AND EJECTING THE TAPE......................... 1, 2  
Insert a cassette into the tape slot and the tape player will start.  
Press the eject button to eject a tape.  
CAUTION  
Only cassette tapes that play no longer than 90 minutes should be used. Tapes exceeding 90 minutes  
are thin and may easily break.  
SELECTING TAPE MODE .......................................... 3  
Inserting a cassette into the tape slot as start the tape player. If radio, CD player is in operation with a tape  
loaded, press the TAPE button to switch to tape mode.  
SWITCHING THE TAPE DIRECTION ........................... 3  
Press the TAPE button  
.
When the tape reaches the end of one side, the unit will automatically switch to the opposite side of the tape.  
FAST FORWARD AND REWIND................................. 4, 5  
Press the FF + button to fast forward and press the - REW button to rewind the tape.  
Pressing the TAPE button during fast forward and rewind operation resumes tape playing.  
-11-  
LOCATING THE BEGINNING OF A PROGRAM  
(AMSS) ....................................................................4, 5, 6  
This system is equipped with a function that allows you to skip forward or backward to locate the beginning  
of a particular selection on the tape. (Automatic Music Select System : AMSS)  
1
2
Press the AMSS button . "AMSS TAPE" is displayed.  
Press the FF + button to skip forward up to 9 selections from the current location on the tape.  
e.g.) With "AMSS TAPE" displayed, press button three times. "AMSS F3" is displayed.  
The system will search for 3 blank spaces between selections in the forward direction, then begin  
playing the third selection from the starting point.  
3
4
Press the - REW button to skip backward to the beginning of the current selection, or up to 8 selections  
from the current location on the tape.  
e.g.) With "AMSS TAPE" displayed, press button five times. "AMSS R5" is displayed.  
The system will search for 5 blank spaces between selections in the backward direction, then begin  
playing the forth selection from the starting point. (The blank space before the current selection  
counts as one blank space.)  
To cancel AMSS mode, press button again.  
Notes  
If AMSS detects 15 seconds of blank space, it will automatically advance the tape  
to the next selection.  
AMSS may not operate properly if  
A tape was recorded at a low level.  
A tape has long, silent intervals.  
A tape is a live recording.  
METAL PLAY MODE .................................................7  
If a metal or high-position tape is used, press the MTL button to make the player in metal play mode. MTL  
is indicated.  
SCAN MODE ............................................................8  
Scan helps to find a program by playing about the first 10 seconds of each selection.  
Press the SCN button during play to start scan operation. "SCn" is displayed.  
To cancel scan, press the SCN button again.  
REPEAT MODE.........................................................9  
This operation makes it possible to listen repeatedly to a selection.  
Press the RPT button during play. "RP" is displayed, the selection playing will continue until RPT is  
pressed again.  
Notes  
RPT/SCN may not operate properly if  
A tape was recorded at a low level.  
A tape has long, silent intervals.  
A tape is a live recording.  
-12-  
CD OPERATION  
2 5  
4
1
3
6 7 8  
LOADING AND EJECTING THE CD ............................ 1, 2  
Insert a disc into the CD slot and the CD player will start playing.  
Press the eject button to eject a disc.  
CAUTION  
This CD player is not designed for 8 cm CDs.  
Please do not use an 8 cm CD nor 8 cm CD adaptor.  
If the unit is already loaded with a CD, please do not attempt to insert another disc,  
which may result in damage to both of the discs and the unit.  
SWITCHING TO CD MODE......................................... 3  
Press the CD button to switch from radio or tape mode to CD player mode.  
When the CD mode is switched on while a disc is loaded, play resumes from the point at which play was  
stopped.  
When the entire disc has played, the unit returns to the first track and play resumes.  
The CD player continues playing the disc until the ON/OFF button is pressed, the other mode is selected, or  
the disc is ejected.  
-13-  
SKIPPING TRACKS...................................................4, 5  
Press the FF + button to skip to the beginning of the next track.  
Press the - REW button to skip to the beginning of the track currently playing.  
Press the - REW button twice to skip to the beginning of the previous track.  
Press and hold the FF + or - REW button for more than 0.5 seconds to search quickly  
(with sound) in the forward or reverse direction.  
When the button is released, the CD resumes normal play.  
SHUFFLE MODE.......................................................6  
This function plays the tracks on a CD in random order.  
Press the SHF button  
to begin shuffle play. The SHF indicator lights.  
Press the FF + or - REW button to select another random track.  
To cancel this mode, press the SHF button again or eject the CD.  
Notes  
If a disc is already loaded under the following conditions, shuffle play will resume  
from the point at which play was stopped:  
If the vehicle ignition is turned off, then on again.  
If the power is switched off, then on again with the ON/OFF button.  
REPEAT MODE.........................................................7  
Press the RPT button to play the current track repeatedly. The RPT indicator lights.  
To cancel this mode, press the RPT button again or eject the CD.  
Notes  
If a disc is already loaded under the following conditions, repeat play will resume:  
If the vehicle ignition is switched off, then on again.  
If the power is switched off, then on again with the ON/OFF button.  
SCAN MODE (PLAYING THE BEGINNING  
OF EACH TRACK).....................................................8  
This function plays the first 10 seconds of each track sequentially.  
Press the SCN button to begin the scan mode. The SCN indicator lights.  
To cancel this mode, press the SCN button again.  
Note  
Scan mode will be canceled when the vehicle ignition is turned off, or when the disc  
is ejected.  
-14-  
ERROR SIGNS  
CD Player  
If a problem should occur while operating the built-in CD player, one of the following error signs  
may be displayed:  
Error Sign  
Cause  
Remedy  
Press the eject button.  
Abnormal mechanism function.  
Turn the power off and then on again.  
If it is not corrected, contact the place  
of purchase.  
The disc is inserted incorrectly.  
The disc is dirty.  
Eject the disc and insert it properly.  
Clean the disc.  
The disc is defective.  
Use another disc.  
Leave the disc player off for an hour  
or so, then try again.  
There is condensation on the  
optical lens.  
Turn the power off and then on again.  
If it is not corrected, contact the place  
of purchase.  
Internal connection check error.  
-15-  
CLOCK  
2
1
3
4
DISPLAY MODE CHANGE..........................................1  
The display on the unit can be changed by pressing DISP button . Press the DISP button to switch  
between the clock and audio display. When a radio, tape and CD function is performed while the time display  
is selected, the audio display will appear for 5 seconds, then the display will return to the time mode.  
ADJUSTING THE TIME ..............................................1, 2, 3  
To adjust the time, press the DISP button for more than 2 seconds. The time display blinks.  
To adjust the minute, press the FF + button  
To adjust the hour, press the - REW button  
.
.
To advance the time rapidly, hold the FF + or - REW button continuously.  
Press DISP button again to start the clock.  
CLOCK RESET .........................................................1, 4  
Press DISP button for more than 2 seconds and the time display blinks. While blinking, press preset  
button 6 to skip to the nearest half-hour as follows:  
Example: 3:00 ~ 3:29  
3:30 ~ 3:59  
3:00  
4:00  
Notes  
This unit uses a 12-hour clock.  
The clock function and radio presets are retained in memory when the audio is switched off.  
-16-  
HINTS FOR PROPER AND SAFE OPERATION  
Condensation  
Moisture can condense on the optical lens of the CD player during humid or rainy days, or after the car  
heater is turned on. If this occurs the disc player may not function properly. To remedy the situation,  
remove the disc from the unit and wait approximately one hour. This should allow the moisture to  
evaporate and restore normal operation.  
Temperature Consideration  
The unit may not operate correctly in extremely hot or cold temperatures. Avoid exposing the unit to  
extremely high or low temperatures.  
Interruptions in the sound (skipping)  
When the car is driven on very rough surfaces, the sound from the CD player may skip and be interrupted.  
This will not cause any damage to the disc or the player. If this occurs, wait for the road surface to  
improve before using the CD player.  
Safety  
For safer driving, keep the volume at a moderate level to enable you to hear outside sounds (such as  
emergency vehicle sirens).  
Cleaning the unit  
Clean the unit with a soft, dry cloth. Stains should be removed by wiping the surfaces with a soft cloth  
immersed in lukewarm water and wrung dry. Never use strong chemicals or solvents. These will damage  
the finish of the unit.  
Disc care  
When not using the disc player for extended periods, remove the compact disc and return it to the  
plastic storage case. Do not leave a disc partially ejected from the player.  
Servicing  
Should a problem develop, do not open the unit or try to repair it yourself. If servicing is required, bring  
the unit to a Sanyo Authorized Service Center.  
-17-  
TROUBLESHOOTING  
Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with the unit.  
Before having the unit serviced, refer to the troubleshooting chart below.  
Symptom  
Cause  
Solution  
The compact disc does not play  
when inserted into the unit.  
The volume control is turned  
down.  
Turn up the volume control.  
The power connections are not  
wired correctly.  
Check the +12V and ground  
connections.  
No sound is coming out.  
No power.  
The speaker code connection is  
imcomplete.  
Check the connection of the  
speaker code, and press the  
ON/OFF button.  
The vehicle ignition is switched  
off.  
Switch the ignition to the "ON"  
or "ACC" position.  
The fuse is blown.  
Replace the fuse with another  
15A fuse.  
The unit does not work properly  
(Eject, Load, Play).  
The microcomputer has been  
affected by electrical noise.  
Eject the disc, then insert it  
again.  
The sound from the CD player  
skips.  
The road surface is rough.  
Wait for the road surface to  
improve before playing a disc.  
The unit is not mounted  
securely.  
Install the unit securely.  
The disc is defective.  
Try another disc. If it plays  
properly, the first disc may be  
defective.  
The disc is dirty.  
Clean the disc as explained on  
pages 3-4.  
No radio reception.  
The antenna cable is not  
connected.  
Insert the antenna cable firmly  
into the antenna jack on the  
unit.  
The radio does not stop on any  
stations when automatic tuning  
is used.  
The signals are weak.  
Select a station using manual  
tuning.  
-18-  
ACCESSORIES AND HARDWARE  
Mounting Bracket  
(Half Sleeve) x 1  
Rear Strap  
(Brace) x 1  
Screw M5 x 14  
x 1  
Hex bolt M5 x 8  
x1  
Unlock Levers  
x 2  
Screw M2 x 8  
x 1  
Removable Trim Ring  
x 1  
INSTALLATION  
1. BEFORE INSTALLATION  
When mounting the unit in a car, keep the unit as level as possible.  
If the unit must be mounted at an angle, due to the design of the  
vehicle, make sure the unit does not tilt by more than 30°.  
-19-  
2. ISO MOUNTING WITH REMOVABLE TRIM RING  
When mounting the unit into a DIN-standard cutout (182 × 53 mm) in the dashboard or  
console, attach the provided Removable Trim Ring to the unit.  
DASHBOARD OR CONSOLE  
182 mm  
AUDIO UNIT  
53 mm  
REMOVABLE TRIM RING  
3. INSTALLATION PROCEDURES  
DASHBOARD  
OR CONSOLE  
M5 x 14  
HEX BOLT  
182 mm  
53 mm  
REAR STRAP  
(BRACE)  
REMOVABLE  
TRIM RING  
MOUNTING BRACKET  
(HALF SLEEVE)  
AUDIO UNIT  
1. Insert the mounting bracket into the DIN-standard cutout (182 × 53 mm) in the dashboard or console.  
2. Bend the mounting bracket stopper outward until the bracket fits snugly in the cutout.  
3. Push the unit into the mounting bracket until it locks in place.  
4. Secure the rear strap to the audio unit and vehicle dashboard.  
-20-  
4. Installation to TOYOTA/NISSAN Vehicles  
Install the unit using the existing TOYOTA/NISSAN Mounting Bracket and Screws. Use mounting holes in  
the unit chassis. "T" or "N" is engraved next to each mounting hole. Use "T" holes for Toyota vehicles and  
"N" holes for Nissan vehicles.  
TOYOTA/NISSAN  
Mounting Bracket  
Screw  
CAUTION  
ONLY USE M5 x 6 SCREW  
(NOT INCLUDED WITH THIS  
UNIT) AS ILLUSTRATED ABOVE.  
USE OF ANY OTHER SCREW OR  
HARDWARE MAY RESULT DAMAGE  
TO HEAD UNIT.  
Screw  
-21-  
UNIT REMOVAL  
AUDIO UNIT  
3
2
2
3
3
UNLOCK LEVERS  
1. Remove the front panel by pressing the release knob.  
2. Insert the unlock levers into the slots as illustrated.  
Note  
The jagged side of the key should face outward.  
3. Slide down keys outward and pull to remove the audio unit.  
-22-  
ELECTRICAL CONNECTIONS  
1. ANTENNA SOCKET  
ANTENNA PLUG  
2-speaker System  
4-speaker System  
(White)  
(White)  
Front Left  
Speaker  
Left  
Speaker  
(White/Black)  
(Gray)  
(White/Black)  
(Gray)  
(Gray/Black)  
(Green)  
(Green/Black)  
(Violet)  
(Violet/Black)  
Front Right  
Speaker  
Right  
Speaker  
(Gray/Black)  
(Green)  
(Green/Black)  
(Violet)  
Do Not  
Connect  
Rear Left  
Speaker  
Rear Right  
Speaker  
Do Not  
(Violet/Black)  
Connect  
2. +12V Constant Power Supply (Yellow)  
3. +12V Accessory/Switched (Red)  
4. Ground Wire (Black)  
5. Power Antenna (Blue/Red)  
6. Amplifier Turn On (Blue/White)  
CAUTION  
DO NOT connect any speaker wires to the metal body or chassis of the vehicle.  
DO NOT connect the speaker common (-) wires to each other.  
Connect each speaker wire directly to each speaker terminal.  
All speaker common (-) wires must remain floating.  
1 Antenna socket  
Insert the plug from the antenna installed in your vehicle into this socket. (If your vehicle has a dual  
antenna system, a dual antenna to single antenna cable adaptor may be required.)  
2 +12V Constant Power Supply (Yellow)  
Connect this wire to the +12V power terminal which receives power continuously.  
Connect to location drawing 10 A amperage or more.  
3 +12V Accessory/Switched (Red)  
Connect this wire to the terminal which receives power while the ignition switch is at ON or  
ACCESSORY position.  
If the ignition switch does not have an ACC position, connect this wire to a +12V  
power terminal which receives power continuously. (Same as item 2.)  
Connect to location drawing 100 mA amperage or more.  
4 Ground wire (Black)  
Connect this wire to the vehicle chassis.  
5 Power Antenna (Blue/Red)  
Connect this wire to the control terminal of a Power Antenna.  
When not using a Power Antenna, this wire is not connected.  
6 Amplifier Turn On (Blue/White)  
Connect this wire to an external amplifier.  
When not using an external amplifier, this wire is not connected.  
-23-  
Notes  
When using a two-speaker installation, the Green, Green/Black, Violet, Violet/Black wires,  
which are used for a four-speaker installation, are not used. The ends of these wires must  
be covered with electrical tape to prevent them from shorting to the unit or the vehicle chassis.  
When using a two-speaker installation, set the  
FADER control to the center position.  
When fuse replacement is necessary remove  
the blown fuse by using pliers.  
Then install the new 15 amp. fuse.  
Fuse 15A  
NG  
OK  
Burnt  
LINE OUT CONNECTIONS  
The unit has a line output terminals. You can use a separate amplifier to upgrade your system.  
RCA Line-out Jacks  
OUTPUT  
FRONT REAR  
White  
L (eft)  
R (ight)  
Red  
External  
Amplifier  
Front Speaker  
Rear Speaker  
RCA Line-out Jacks (For Speakers)  
Connect a patch cable (not supplied) from the White (left channel) and Red (right channel) RCA line output  
jacks to the line input terminals of the external amplifier.  
-24-  
SPECIFICATION  
FM TUNER SECTION  
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5MHz~107.9MHz  
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15dBf  
50dB Quieting Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30dBf  
Frequency Response ( 3dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Hz~12.5kHz  
I.F. Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100dB  
Image Rejection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65dB  
Signal-to-Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60dB  
Selectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65dB  
Stereo Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27dB  
Capture Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2dB  
Antenna Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75  
AM TUNER SECTION  
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530kHz~1710kHz  
Usable Sensitivity (S/N 20dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20µV  
I.F. Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80dB  
Image Rejection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75dB  
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50dB  
Antenna Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Ω  
TAPE SECTION  
Wow and Flutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.1%  
S/N Ratio (Normal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52dB  
Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50dB  
Frequency Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Hz15kHz  
CD SECTION  
Disc size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5”  
Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-channel stereo  
Sampling Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.1kHz  
D/A Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Twin, 1bit  
Pickup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optical 3-beam semiconductor laser  
Digital Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 fs  
Frequency Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz~20kHz  
Total Harmonic Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1% (1 kHz)  
Dynamic Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85dB  
Signal-to-Noise Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90dB  
Wow and Flutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Below measurable limits  
Channel Separation (1kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85dB  
AUDIO SECTION  
RMS Power Rating (3% THD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20W × 4 (14.4 V)  
RMS Power Rating (10% THD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24W × 4 (14.4 V)  
Maximum Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50W × 4CH (15.5 V)  
Load Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Ω  
GENERAL  
Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V (10.515.5 V)  
Operating Current Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13A  
IMPORTANT INFORMATION  
Because its products are subject to continuous improvement, SANYO reserves the right to modify  
product designs and specifications without notice and without incurring any obligation.  
-25-  
21605 Plummer Street  
Chatsworth, CA91311  
1ED6P10A18700  
Rev.0  
Printed in Malaysia  

Weil McLain Gas Boiler User Manual
Toyota 95 8211 User Manual
Sony WM GX221 User Manual
Sony VF 74CP User Manual
Sony CCD TRV57 User Manual
Silvercrest KH 2380 User Manual
Sanyo VCC 5984 User Manual
Samsung SR L36 User Manual
Samsung SC D375(H) User Manual
Samsung SCD29 User Manual