INSTRUCTION MANUAL
Digital Movie Camera
VPC-HD1000EX
VPC-HD1000
VPC-HD1000GX
Important note
This manual explains how to safely operate the VPC-HD1000EX,
VPC-HD1000 and VPC-HD1000GX.
Any information regarding only one of these products will be labeled as such.
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “SAFETY MANUAL”.
Keep this manual in a safe place for later reference.
FOR CANADIAN USERS
i This Class B digital apparatus complies with Canadian ICES-003.
FOR EU USERS
Note:
iThis symbol mark and recycle system apply only to EU
countries and do not apply to countries in other areas of
the world.
Your SANYO product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
SANYO FISHER Sales (Europe) GmbH
Stahlgruberring 4, D-81829 München, Germany
SANYO Electric Co., Ltd.
1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan
FOR RUSSIAN USERS
This product certified by official certification company
which is authorized by Russian Federation.
English
ii
Symbols used in this manual
HINT
Points giving some extended instructions or special points to pay
attention to.
CAUTION Points that require special attention.
(page xx) Refer to the page indicated for detailed information.
You may find the answers to questions or problems concerning camera
operation in the sections “COMMONLY ASKED QUESTIONS” (page 189)
and “TROUBLESHOOTING” (page 197).
iii English
SHOOT, PLAY BACK AND SAVE
Preparing the camera
1
Insert the SD Memory Card.
h An SD Memory Card is not included with your camera. Please
purchase a commercially sold card.
h In this manual, the SD Memory Card is referred to as the “card”.
Card slot cover
Card slot
SD Memory Card
2
Connect the AC adaptor to the camera.
DC IN terminal
DC IN terminal cover
Power cord
Supplied AC adaptor
To power outlet
English iv
SHOOT, PLAY BACK AND SAVE
Before capturing those important shots, be sure to first take a
test shot to confirm that your camera is set up and ready to go
Sanyo declines any claim for compensation for recorded contents etc. in case
of photographing or recording failure due to a chance camera or card flaw.
i
Shooting
1
2
Set the REC/PLAY switch
to REC.
REC/PLAY switch
Press the ON/OFF button
for at least 1 second to turn
the camera on.
Set to REC
h
If the screen to set the date
and time appears, press
the MENU button 2 times
to cancel it.
[
[
] button
] button
ON/OFF button
For how to set the date
and time, see page 43.
3
Record.
To record a video clip:
Monitor
h
Press the [
] button to
begin recording a video
clip.
h
Press the [
again to end the recording.
To take a photo:
] button
h
Press the [
] button.
h
A still image is captured.
362
00:05:0088
F1.8
1/14
v
English
Playback
1
2
Set the REC/PLAY switch
to PLAY.
h
The display changes to
the Playback Screen and
the image that was just
captured is shown.
REC/PLAY switch
Set to PLAY
Toggle the SET button to
the left or right to display
the image you wish to see.
<Video clip playback>
h
Video clips are indicated
by a video clip pattern
along the left and right
sides of the screen.
h
Press the SET button to
start video clip playback.
<To return to the shooting
mode>
h
Set the REC/PLAY switch
to REC.
SET button
PLAY
2007.112.24
Video clip pattern
<Example: After recording a
video clip>
When you are finished using the camera...
Press the ON/OFF button for at least 1 second to turn the camera off.
English vi
SHOOT, PLAY BACK AND SAVE
Burn your recorded video clips onto a DVD
(Windows XP)
Using the supplied DVD-ROM (Xacti Software DVD), you can store your
captured images on a DVD. Detailed information about the Xacti
Software DVD can be found on page 4 in the Xacti Software DVD
INSTRUCTION MANUAL.
Install application programs
1
Set the supplied DVD-ROM (Xacti Software DVD) in your computer’s
DVD drive.
h The installation window opens.
2
Click on [Ulead DVD MovieFactory 5 SE] (hereinafter referred to as
“MovieFactory”).
h Install the application program with which you can create DVDs
(MovieFactory).
<When the [Product Activation] window appears>
1 Click on “Get activation code from Internet”
2 Enter your registration information
Email address: Your current email address
Password:
Create a password
Serial number: Enter the serial number from the DVD-ROM
(supplied) sheet.
<For registered Ulead members>
h Enter your email address, password, and the serial number,
and click on the “Sign In” button.
<For non-registered Ulead members>
h Click on the “Create a New Account” button, enter your
registration information, and click on the “Submit” button.
3 The activation code will appear in a pop-up window. Enter this
number in the [Product Activation] window, and click on the
“Activate” button.
h After clicking on an application program, follow the instructions shown
on the monitor to install the program.
vii English
3
In the installation window, click on [Finish] and remove the DVD-
ROM from the computer’s DVD drive.
<About the Kodak online service>
h When the installation window closes, a dialog box to connect to the
website introducing Kodak’s online service appears. Check the [No
thanks!] option button, and then click on the [OK] button.
Connect your camera to a computer
Connect your camera to a computer, and copy the desired files to the
computer.
1
2
Use the supplied dedicated USB interface cable to connect your
camera to the computer.
Turn on the camera.
h The USB Connection Screen appears on the camera’s monitor.
USB CONNECTION
COMPUTER
PRINTER
CANCEL
CANCEL
OK
To power outlet
To USB terminal on
the docking station
To USB connector
on the computer
Supplied dedicated USB
Dedicated USB
interface cable
interface cable
i Insert the plug with the [n]
mark facing up.
English viii
SHOOT, PLAY BACK AND SAVE
3
4
Select [COMPUTER], and press the SET button.
h The screen to select the computer connection mode appears.
Select [CARD READER], and press the SET button.
h The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
h The card is recognized (mounted) as a disk, and the [XACTI (E:)] icon
appears in the [My Computer] window.
* The drive name (E:) may be different on your computer.
5
Copy the files from the card to the computer’s hard disk.
h The data recorded with your camera are stored in the following folder.
You can specify the folder on the hard disk to which to copy the files.
XACTI (E:)\DCIM\****SANYO
(**** represents numbers [page 12 in the Xacti Software DVD
INSTRUCTION MANUAL]).
ix English
Burn video clips onto a DVD
1
Click on your desktop’s [Ulead DVD MovieFactory 5 Launcher] icon
to run MovieFactory.
h The MovieFactory launcher appears.
h If the product registration screen appears, select [Register Later].
English
x
SHOOT, PLAY BACK AND SAVE
2
Click on [New Project].
h The [Create Video Disc] window opens.
xi English
3
Set the [DVD] option to ON, and click on the [OK] button.
h The [Select source and import] window opens.
4
Click on the [Add video files] icon.
[Add video files] icon
h The [Open Video File] dialog box opens.
h Open the folder that contains the video files.
English xii
SHOOT, PLAY BACK AND SAVE
5
Select the video clip files to burn onto the DVD.
h Select the files you wish to burn onto the DVD by clicking on them.
h To select multiple files, click on the individual files while holding down
the [Ctrl] button. If you select one file, hold down the [Shift] button and
click on another file in the list, all the files in between are also
selected.
6
Click on the [Open] button.
<When one video clip is selected>
h The [Open Video File] dialog box closes.
<When multiple video clips are selected>
h The [Rearrange clip order] dialog box opens.
h You can drag the clip file names to change the video clip playback
order.
h Click on the [OK] button, and the [Rearrange clip order] dialog box
closes.
h The file selected in step 5 appears in the [Select source and import]
window.
xiii English
7
8
9
Click on the [Next] button.
h The window to edit the title page of your DVD appears.
Set your desired title page, and click on the [Next] button.
h The window to confirm the title page appears.
Click on the [Next] button.
h The [Press Burn button to create a DVD] window opens.
10 Set the [Recording format] to [DVD-Video].
11 Set a blank DVD in your computer’s disc
burner, and click on the [Burn] icon.
h A confirmation dialog box appears.
English xiv
SHOOT, PLAY BACK AND SAVE
12 Click on the [OK] button.
h Disc writing begins.
h After burning the disc, a dialog box shows that burning is complete.
13 Click on the [OK] button.
h The DVD drive tray opens for you to remove the disc.
<About saving projects>
h After burning a disc, a save project dialog box appears. If you wish to
use the settings for the current project in subsequent projects, you
should save them. If you will not use the settings in subsequent
projects, it is not necessary to save them.
14 Click on the [OK] button.
h You are returned to the MovieFactory launcher.
15 Click on the exit MovieFactory button [×].
h The DVD is completed.
h MovieFactory is exited.
xv English
How was that? The convenient accessories not only let you immediately view
images captured with the camera, but you can also upload images to your
computer and create your original DVDs. Read the following explanations to
find out how you can fully enjoy your camera’s digital movie feature.
English xvi
CONTENTS
QUICK SEARCH BY OPERATION ........................................................ 6
CHECKING THE INCLUDED ACCESSORIES .................................... 11
How to use the accessories .......................................................... 13
Separately sold accessories ......................................................... 15
Media cards that can be used with this camera ............................ 16
GETTING THE MOST OUT OF YOUR CAMERA ............................... 17
High-quality images with “full high definition” ................................ 17
Includes SIMPLE mode for quick-and-easy operation .................. 18
Image stabilizer for sharp pictures ................................................ 18
Sharp face shots ........................................................................... 19
Xacti Library feature ...................................................................... 19
SYSTEM MAP ..................................................................................... 21
„ SETUP
PARTS NAMES ................................................................................... 22
Camera ......................................................................................... 22
Docking station ............................................................................. 25
Remote control unit ....................................................................... 26
INSTALLING THE CARD ..................................................................... 27
PREPARING THE DOCKING STATION ............................................. 29
PREPARING THE REMOTE CONTROL UNIT ................................... 30
Prepare the battery ....................................................................... 30
How to use the remote control unit ............................................... 31
PREPARING THE POWER ................................................................. 33
Charging the battery pack ............................................................. 33
When using a power outlet ........................................................... 37
About recharging .......................................................................... 39
TURNING THE CAMERA ON AND OFF ............................................. 40
Turning on the camera .................................................................. 40
Turning on the camera when the power save (sleep) mode
is active .................................................................................... 41
Turning off the camera .................................................................. 41
DATE AND TIME SETTING ................................................................. 43
SWITCHING BETWEEN THE SHOOTING MODE AND
PLAYBACK MODE .......................................................................... 46
1
English
SIMPLE MODE/NORMAL MODE .........................................................47
About the SIMPLE mode and NORMAL mode .............................47
Switching between the SIMPLE and NORMAL modes .................48
Accessing/exiting the SIMPLE/NORMAL Mode Menu Screen ......49
Overview of the SIMPLE Mode Setting Screen .............................55
Overview of the NORMAL Mode Setting Screen ..........................59
FULL AUTO MODE ..............................................................................67
„ SIMPLE
SHOOTING
BEFORE TAKING PICTURES .............................................................68
For best results ..............................................................................68
Using the autofocus .......................................................................69
Select the recording size ...............................................................71
Select the focus setting ................................................................72
Hints for taking pictures .................................................................73
VIDEO CLIP RECORDING ...................................................................74
SHOOTING SINGLE SHOTS ...............................................................75
Using the flash ...............................................................................77
SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP ..........79
MACRO-PHOTOGRAPHY (ZOOM) .....................................................81
SHOOTING AND PLAYBACK WITH THE REMOTE
CONTROL UNIT ..............................................................................82
PLAYBACK
PLAYING BACK VIDEO CLIPS AND STILL IMAGES ..........................83
SLIDESHOW PLAYBACK ....................................................................86
PLAYBACK VOLUME ...........................................................................87
DELETING FILES .................................................................................88
PLAYBACK MODES .............................................................................90
9-image display playback ..............................................................90
Selecting the playback folder ........................................................91
Magnifying (zooming in) the image ...............................................92
„ NORMAL
SHOOTING
RECORDING SIZE ...............................................................................93
Movies ...........................................................................................93
Still images ....................................................................................94
Sequential shots ............................................................................95
Audio recording .............................................................................96
SCENE SELECT ..................................................................................99
FILTERS .............................................................................................101
English
2
CONTENTS
FLASH OPERATION ......................................................................... 102
SELF-TIMER ...................................................................................... 103
MOTION COMPENSATION (IMAGE STABILIZER) .......................... 105
Compensate for camera shake when recording movies ............. 105
Compensate for camera shake when shooting still images ........ 105
FOCUS RANGE ................................................................................. 107
How to use the manual focus ..................................................... 108
FOCUS MODE ................................................................................... 109
LIGHT-MEASURING MODE SETTING ............................................. 110
ISO SENSITIVITY .............................................................................. 111
WHITE BALANCE .............................................................................. 113
EXPOSURE SETTING ...................................................................... 114
DIGITAL ZOOM SETTING ................................................................. 116
FACE CHASER ................................................................................. 117
HIGH SENSITIVITY MODE ............................................................... 118
EXPOSURE COMPENSATION ......................................................... 119
PLAYBACK
SLIDESHOW PLAYBACK ................................................................. 120
FILE PROTECT ................................................................................. 122
PRINTING INSTRUCTIONS .............................................................. 123
Display the Printing Instructions Screen ..................................... 123
Specifying date imprinting and print quantities ........................... 125
Index print ................................................................................... 127
Clearing all the printing instructions ............................................ 128
ROTATE STILL IMAGE ..................................................................... 129
REDUCE STILL IMAGE SIZE (RESIZE) ........................................... 130
EXTRACTING ONE FRAME FROM A VIDEO CLIP ......................... 131
EDITING VIDEO CLIPS ..................................................................... 132
Procedure to cut (extract) a portion of a video clip ..................... 132
Procedure to join video clips ....................................................... 133
Video clip cutting (extracting) ...................................................... 134
Joining video clips ....................................................................... 137
DISPLAYING FILE PROPERTIES (INFORMATION SCREEN) ........ 140
„ OPTION SETTINGS
DISPLAY THE OPTION SETTING MENU ......................................... 141
SCREEN DISPLAY ............................................................................ 142
SELECT THE STARTUP DISPLAY ................................................... 143
OPERATION SOUNDS ..................................................................... 144
POST-VIEW DISPLAY SETTING ...................................................... 146
SPECIFY A FOLDER TO SAVE FILES ............................................. 147
3
English
ASSIGN SET BUTTON FUNCTIONS ................................................148
NOISE-REDUCTION FUNCTION ......................................................150
ADJUST THE IMAGE QUALITY .........................................................151
FLICKER-REDUCTION ......................................................................152
MONITOR BRIGHTNESS ..................................................................153
ADJUST THE VOLUME OF AN EXTERNAL MICROPHONE ............154
SCREEN LANGUAGE ........................................................................155
TV OUTPUT SETTING .......................................................................156
POWER SAVE FUNCTION ................................................................160
FILE NO. MEMORY ............................................................................162
FORMATTING A CARD .....................................................................165
RESETTING THE CAMERA SETTINGS ............................................167
CHECKING THE REMAINING CARD MEMORY ...............................168
Checking the remaining number of images and
video recording time ................................................................168
For audio recordings ...................................................................168
CHECKING THE REMAINING BATTERY PACK CHARGE ..............170
„ OTHER DEVICES AND CONNECTIONS
CONNECTING TO A TV
CONNECTING TO A STANDARD VIDEO INPUT TERMINAL ..........172
ENJOY HIGHER IMAGE QUALITY ....................................................173
Connect to the S-VIDEO terminal ...............................................173
Connect to the 480p/720p/1080i terminal ...................................174
Connecting to the HDMI terminal ................................................175
PLAYING BACK ON A TV ..................................................................176
Xacti Library ........................................................................................177
CONNECTING TO A PRINTER
PictBridge MODE ................................................................................178
PRINTING ...........................................................................................180
Printing selected images .............................................................180
Printing all images .......................................................................182
Making an index print ..................................................................183
Printing images according to printing instructions
(requested images) .................................................................184
Changing the printer settings ......................................................185
OTHER CONNECTIONS
CONNECTING A MICROPHONE/HEADPHONES ............................187
SHOE MOUNT ...................................................................................188
English
4
CONTENTS
„ APPENDICES
COMMONLY ASKED QUESTIONS ................................................... 189
TROUBLESHOOTING ....................................................................... 197
Camera ....................................................................................... 197
Docking station ........................................................................... 206
Notes regarding the Scene Select feature and filters ................. 208
SPECIFICATIONS ............................................................................. 210
Camera ....................................................................................... 210
Camera connectors .................................................................... 214
Battery life ................................................................................... 215
Possible No. of Images/Possible Shooting Time/
Possible Recording Time ....................................................... 216
Docking station ........................................................................... 217
Remote control unit ..................................................................... 217
Concerning the multi-indicator and blue LED indicator ............... 218
Supplied AC adaptor ................................................................... 219
Supplied Li-ion battery pack ....................................................... 219
Others ......................................................................................... 220
Before capturing those important shots, be sure to first take
a test shot to comfirm that your camera is set up and
ready to go ............................................................................. 221
HINTS FOR TAKING PICTURES ...................................................... 222
5
English
QUICK SEARCH BY OPERATION
Your camera has an abundance of convenient features and functions. From
creating precisely the photo you want, to viewing images using various
techniques, you can locate the exact operation for your purposes in the
following table.
Shooting/recording
Basic operation
Convenient functions Additional functions
Log the date and time For more accurate
Getting started
shooting/recording
of your photos
focus
• “How to use the manual
•
“VIDEO CLIP
•
“DATE AND TIME
RECORDING” on
page 74
“SHOOTING SINGLE
SHOTS” on page 75
“Sequential shots” on
page 95
SETTING” on page 43
focus” (manual focus) on
page 108
Set the focus to a
narrow range
“FOCUS MODE” on
page 109
Reduce noise when
recording
“NOISE-REDUCTION
Zoom in on the
subject
“MACRO-
PHOTOGRAPHY
(ZOOM)” on page 81
Close-up
•
•
•
•
•
“Audio recording” on
page 96
photography
•
“Select the focus setting”
(super macro mode) on
page 72
•
FUNCTION” on page 150
•
“FOCUS RANGE” (super
macro mode) on
page 107
Optimize the photo
quality
Reduce video clip flicker
“FLICKER-REDUCTION” on page 152
•
Set the camera’s color/contrast
characteristics
•
“Select the recording
size” on page 71
“RECORDING SIZE” on
page 93
•
•
“ADJUST THE IMAGE QUALITY” on page 151
Capture fast-moving subjects
“SCENE SELECT” (sports mode) on page 99
•
Suppress camera shake effect
•
•
“Compensate for camera shake when recording movies” on page 105
“Compensate for camera shake when shooting still images” on page 105
Shoot in dark conditions
•
•
•
•
“EXPOSURE COMPENSATION” on page 119
“Using the flash” on page 77
“FLASH OPERATION” on page 102
“SCENE SELECT” (night view portrait mode/fireworks mode/lamp mode) on page 99
Increase the camera’s sensitivity
•
•
“ISO SENSITIVITY” on page 111
“HIGH SENSITIVITY MODE” on page 118
English
6
QUICK SEARCH BY OPERATION
Shooting/recording
Basic operation
Convenient functions Additional functions
Photographing people
•
•
•
•
“SCENE SELECT” (portrait mode/night view portrait mode) on page 99
“FILTERS” (cosmetic filter) on page 101
“Using the flash” (red-eye reduction) on page 77
“FLASH OPERATION” (red-eye reduction) on page 102
Sharp face shots
“FACE CHASER” on page 117
•
Simplified operation for shooting/playback
•
•
“SIMPLE MODE/NORMAL MODE” on page 47
“FULL AUTO MODE” on page 67
Photographing landscapes
“SCENE SELECT” (landscape mode) on page 99
•
Take a self-photo
•
“SELF-TIMER” on page 103
Make images lighter
or darker
Measure the
brightness of a
specific area
“LIGHT-MEASURING
MODE SETTING” on
page 110
•
“EXPOSURE
COMPENSATION” on
page 119
•
•
“HIGH SENSITIVITY
MODE” on page 118
Adjust the camera’s
sensitivity
•
“ISO SENSITIVITY” on
page 111
For a more precise
exposure setting
•
“EXPOSURE SETTING”
(manual exposure
control) on page 114
Change the color of
the images
“FILTERS” (monochrome
filter/sepia filter) on
page 101
Make white appear
natural
•
•
“WHITE BALANCE” on
page 113
7
English
Playback
Basic operation
Convenient functions Additional functions
Getting started
viewing images
Adjust the speaker
volume
Change the angle of
view
•
“PLAYING BACK VIDEO
CLIPS AND STILL
•
“PLAYBACK VOLUME”
on page 87
•
“ROTATE STILL IMAGE”
on page 129
IMAGES” on page 83
Search for image/
audio files
•
“9-image display
playback” on page 90
“Selecting the playback
folder” on page 91
•
Magnify an image
•
“Magnifying (zooming in)
the image” on page 92
•
“Audio playback” on
page 97
Adjust the speaker volume
“PLAYBACK VOLUME” on page 87
•
Continuous playback
“SLIDESHOW PLAYBACK” on page 86 and 120
•
Adjust the monitor brightness
“MONITOR BRIGHTNESS” on page 153
•
Playback on a TV
“PLAYING BACK ON A TV” on page 176
Set the TV system
“TV OUTPUT SETTING” on page 156
How to use Xacti Library
“Xacti Library” on page 177
•
•
•
English
8
QUICK SEARCH BY OPERATION
File managing/processing
Basic operation
Convenient functions Additional functions
Search for image/audio files
•
•
“9-image display playback” on page 90
“Selecting the playback folder” on page 91
Delete files
Protect files from accidental erasure
“FILE PROTECT” on page 122
Format a card
“FORMATTING A CARD” on page 165
•
“DELETING FILES” on
page 88
•
•
Delete a part of a video clip and join video clips
“EDITING VIDEO CLIPS” on page 132
•
Specify the number of prints, index print, and date imprint
“PRINTING INSTRUCTIONS” on page 123
•
View the settings that were in effect when the image/audio files were
recorded
•
“DISPLAYING FILE PROPERTIES (INFORMATION SCREEN)” on page 140
9
English
Using with a computer
Basic operation
Convenient functions Additional functions
Use the camera as a card reader
•
“USING AS A CARD READER” on page 9 in the Xacti Software DVD INSTRUCTION
MANUAL
Copy files from your
camera to a computer
Using with Windows Vista
•
“CONNECTING IN THE MTP MODE” on page 14 in the
Xacti Software DVD INSTRUCTION MANUAL
•
“Connect your camera to
a computer” on page viii
Burn files copied to the computer onto a DVD
“Burn your recorded video clips onto a DVD (Windows XP)” on page vii
•
Playback
•
“About video clip files recorded with this camera” on page 13 in the Xacti Software
DVD INSTRUCTION MANUAL
Using as a webcam
•
“Using as a PC camera” on page 16 in the Xacti Software DVD INSTRUCTION
MANUAL
Record an image of the computer screen
•
“SCREEN CAPTURE” on page 25 in the Xacti Software DVD INSTRUCTION
MANUAL
English 10
CHECKING THE INCLUDED ACCESSORIES
i Soft case (page 14): 1
i Handstrap (page 13): 1
i Xacti Software DVD
(DVD-ROM) (page 4 in the
Xacti Software DVD
i Li-ion battery pack (page 34):
1
INSTRUCTION MANUAL): 1
i Docking station (pages 25
and 29): 1
i Dedicated S-AV interface
cable (pages 172 and 173): 1
i Dedicated USB interface
cable (page 7 in the Xacti
Software DVD INSTRUCTION
MANUAL): 1
i Dedicated component cable
(page 174): 1
i HDMI cable (page 175): 1
Included with model
i AC adaptor and power cord
(pages 29, 37 and 38): 1
VPC-HD1000EX. Not included
with other models.
11 English
i Remote control unit
(pages 26, 30 to 32 and 82): 1
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material - special
handling may apply.
The lithium battery used in this
camera contains perchlorate
material, which may require
special handling. See
www.dtsc.ca.gov/hazardouswaste/
perchlorate.
i Lens cap (page 13): 1
i Dedicated USB converter
cable: 1
h For use with the Xacti Library
feature
i Microphone connection cable
i Cores: (6)
(page 187): 1
i “SAFETY MANUAL”
(safety precautions booklet)
Please read this booklet
carefully before using the
camera.
i Xacti Library Instruction
Manual
i Quick Guide
Included with model
VPC-HD1000GX. Not included
with other models.
English 12
CHECKING THE INCLUDED ACCESSORIES
How to use the accessories
k Handstrap
k Lens cap
13 English
k Soft case
English 14
CHECKING THE INCLUDED ACCESSORIES
Separately sold accessories
i HDMI cable VCP-HDMI01
Cable for connecting to the HDMI terminal on the docking station.
i Lithium-ion Battery Charger VAR-L50
Battery charger for the supplied or separately sold lithium-ion battery pack
(DB-L50A).
i Lithium-ion Battery DB-L50A
Same model as the supplied lithium-ion battery pack.
i Wide Conversion Lens VCP-L07W
Expand your camera’s wide-angle range.
i Tele Conversion Lens VCP-L16T
Make distant objects appear closer.
i External Microphone VCP-MP01
Connect this stereo microphone to the external microphone jack [MIC].
i Semi Fish-eye Lens VCP-L04F
For wide-angle shots close to the fisheye lens.
15 English
Media cards that can be used with this camera
The type of card that can be inserted into and used with this camera is:
i SD Memory Card
English 16
GETTING THE MOST OUT OF YOUR
CAMERA
Your digital movie camera can record video clips in full high vision. It includes
an operation mode that lets even novice shutterbugs record and play back
without getting flustered, as well as software with which you can easily create
your original DVDs. In addition, it comes with the “Xacti Library” feature for
saving recorded data to hard disk and managing files without using a
computer.
High-quality images with “full high definition”
(pages 71 and 93)
Your camera can capture full high definition (full HD) 1920 × 1080-pixel,
60 fields/s video clips. Also, the H.264/MPEG-4 AVC standard is used for
formatting video files. You get both compact file size and high picture quality
in one high-performance camera.
17 English
Includes SIMPLE mode for quick-and-easy
operation (page 47)
Select from two shooting/playback modes: the “SIMPLE mode” for users new
to the camera, and the “NORMAL mode” for full use of all the camera’s many
features and functions.
Example:
RECORDING MENU1
MOVIE
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
1
Select movie and
photo size
2
3
1
2
3
OK
<SIMPLE Mode Shooting Menu>
<NORMAL Mode Shooting Menu>
Image stabilizer for sharp pictures (page 105)
Your camera can compensate for the camera shake that results in blurry
images when you try to capture a fast-moving subject or zoom in on a
subject. Image stabilizer functions for both video clip recording and still image
shots are on board.
English 18
GETTING THE MOST OUT OF YOUR CAMERA
Sharp face shots (page 117)
Your camera is equipped with a face recognition feature which detects the
subject’s face even when slightly lit from behind or in dim surroundings and
automatically adjusts the focus and brightness to compensate. Now those
otherwise perfect photos that are marred by shadowed faces can be
minimized.
Xacti Library feature (page 177)
The Xacti Library feature feature allows you to save files recorded with your
camera to a large-capacity hard disk without using a computer and play them
back on your TV. No computer operation is involved. You can view full high-
definition images right on your TV screen.
19 English
Lots of accessories for optimal use of your
captured images (pages 21 and 4 in the Xacti
Software DVD INSTRUCTION MANUAL)
Use the accessory cables to view images on a TV or computer. Or
connect the camera directly to a printer to make prints of your photos.
And with the software in the supplied DVD-ROM (Xacti Software DVD),
you can create your original DVDs and CDs.
English 20
SYSTEM MAP
You can connect the camera to various devices to expand its capabilities.
Remote control
unit
TV
Computer
Hard disc
Printer
Docking station
AC adaptor
(supplied)
i Card reader
i DPOF-compatible printer
i Photo shop
Battery charger
(optional)
Separately sold or commercially
available SD Memory Card
21 English
SETUP
SETUP
PARTS NAMES
Camera
Front
Flash
i Extends when the flash button [?]
is pressed.
Shoe cover
Flash unit
Lens
Strap holder
Flash button [?]
Battery cover lock
Battery cover
Remote control
sensor
Monitor unit
Stereo
microphone
Mic/headphones teminal
cover [MIC/
]
English 22
PARTS NAMES
<To open the monitor unit>
23 English
Rear
Zoom switch
Speaker
Monitor
Multi-indicator
FULL AUTO button
Blue LED indicator
REC/PLAY switch
[
[
] button
] button
MENU button
SET button
Card slot cover
SIMPLE/NORMAL
switch
DC IN terminal cover
ON/OFF button
Bottom
Docking station terminal
Tripod stand hole
English 24
PARTS NAMES
Docking station
Front
Operation mode button
Rear
Docking station terminal
DC IN terminal
USB terminal
COMPONENT/AV terminal
HDMI terminal
25 English
Remote control unit
1
2
3
5
4
8
6
7
9
;
A
<In the shooting mode>
<In the playback mode>
] button
2 (inoperative)
1 [
2 [
] button
] button
1 [
3 Works the same as pushing
zoom switch toward the
[W] ([P]) side
3 Works the same as pushing
zoom switch toward the
[W] ([P]) side
4 Works the same as pushing
zoom switch toward the
[T] ([]]) side
4 Works the same as pushing
zoom switch toward the
[T] ([]]) side
5 SET button
6 Works the same as toggling
SET button to the left
5 SET button
6 Works the same as toggling
SET button to the left
7 MENU button
8 Works the same as toggling
SET button up
7 MENU button
8 Works the same as toggling
SET button up
9 Works the same as toggling
SET button to the right
0 Works the same as toggling
SET button down
9 Works the same as toggling
SET button to the right
0 Works the same as toggling
SET button down
A ON/OFF button
A ON/OFF button
h Works only when the camera
is set in the docking station.
h Works only when the camera
is set in the docking station.
English 26
INSTALLING THE CARD
Be sure to format a newly purchased card or one that was used in another
device before using it in your camera (page 165). If an unformatted card is
used, the card itself may become unusable.
1
Open the card slot cover, and
insert the card in the card slot.
Card slot cover
2
3
Insert the card all the way in.
h Firmly insert the card until it
clicks into place.
SD Memory Card
Card slot
Close the card slot cover.
27 English
<To remove the card...>
h To remove the card, press it in, and then release. The card will
protrude slightly, and you can then pull it out.
CAUTION
Do not attempt to forcibly remove the card
i Doing so may damage the card or the stored files.
If the multi-indicator is flashing red...
i Never remove the card when the multi-indicator is flashing red, as doing so
may result in loss of files stored in the card.
English 28
PREPARING THE DOCKING
STATION
The supplied docking station is used to connect your camera to a computer,
printer or TV, as well as to charge the battery pack installed in the camera.
1
Connect the docking station to a power outlet.
h Use the supplied AC adaptor and power cord.
To reduce spurious
radiation
i Please affix a small core
(supplied) to the cable.
Docking
station
To reduce spurious
radiation
i Please affix a large core
(supplied) to the cable.
3 cm (1.18 in.) or less
Supplied AC adaptor
Power cord
To power outlet
29 English
PREPARING THE REMOTE
CONTROL UNIT
The remote control unit can be used to take pictures and play them back with
the camera.
Prepare the battery
A battery is already installed in the remote control unit at the time of
purchase.
1
Pull out the battery insulating
sheet.
h The remote control unit
becomes operable when the
insulating sheet is removed.
Insulating sheet
Replacing the remote control unit battery
Follow the procedure below to replace the CR2025 battery used in the remote
control unit approximately every year (differing depending on the amount of
use).
Remove the old battery
Insert a new battery
1 Pull out the battery slot.
h While pressing the tab, pull
the battery slot out.
1 Insert a new battery.
h First wipe the battery with a
clean, dry cloth, and insert it
with the (+) mark facing up.
(+) mark
Battery slot
tab
2 Remove the battery.
2 Re-insert the battery slot.
English 30
PREPARING THE REMOTE CONTROL UNIT
How to use the remote control unit
The remote control unit can be used at an angle that is displaced 15
degrees horizontally from the remote control sensor on the front of the
camera, at a distance of up to 7 meters (22.97 ft.). When operating the
remote control unit, remove any object that may obstruct the path
between it and the remote control sensor.
At a distance of
up to 7 meters
(22.97 ft.)
15˚
15˚
To power
outlet
Infrared emitter
Remote control sensor
CAUTION
i If the remote control unit is operated in sunlight or under inverter lighting,
the remote control receiving range may become shorter. This is a
characteristic of the infrared remote control unit and is not a defect. To
avoid this malfunction when operating the remote control unit, take care to
shield the remote control sensor from strong light.
31 English
Changing the remote control code
The remote control unit will also work with other Sanyo cameras that
can be operated by infrared remote control. When more than one
camera is present, it is recommended to change the remote control
code to ensure that only the intended camera operates when the remote
control unit is used. The remote control code is set to “RC CODE 1” at
the time of purchase.
<Changing the remote control code from “RC CODE 1” to “RC
CODE 2”>
1
2
3
Aim the infrared emitter at the remote control sensor on the docking
station.
Simultaneously press the MENU button and the [
least 3 seconds.
] button for at
Press a button on the remote control unit and check that the camera
is receiving correctly.
h The remote control codes are retained even if the batteries in the
remote control unit or camera are replaced.
h If the remote control codes for the remote control unit and the camera
and do not match, the remote control unit cannot be used to operate
the camera.
<Resetting the remote control code to “RC CODE 1”>
1
2
Aim the infrared emitter at the remote control sensor on the docking
station.
Simultaneously press the MENU button and the [
least 3 seconds.
] button for at
English 32
PREPARING THE POWER
Please charge the supplied battery pack before using it. Power to the camera
can also be supplied from a power outlet if the docking station or the AC
adaptor is used.
Charging the battery pack
1
While pressing the battery
cover lock, slide it (1), and
pull out the battery cover
toward the bottom of the
camera (2).
1
h The battery cover comes off.
Battery cover
lock
2
Battery cover
33 English
2
3
4
Insert the battery pack.
h Take care that it is positioned
correctly.
Battery pack
Replace the battery cover.
<To remove the battery pack...>
h Raise the edge of the battery
pack to remove it.
Prepare the docking station
(page 29).
English 34
PREPARING THE POWER
5
Close the camera’s monitor unit,
and set the camera in the docking
station.
Multi-indicator
h Set the camera securely, making
sure that the camera is correctly
oriented in relation to the terminal
contacts in the docking station.
h Charging begins when the camera
is set in the docking station.
h During charging, the multi-
indicator is lit red. When charging
is completed, the indicator turns
off.
h If the multi-indicator flashes red, it
indicates that the battery pack is
defective or the camera is not
correctly set in the docking station.
Reset the camera correctly in the
docking station.
h The charging time is approx.
200 minutes.
h The AC adaptor (supplied) can be
connected to the camera’s DC IN
terminal to charge the battery.
Docking station terminal
35 English
CAUTION
Using the camera when it is set in the docking station...
i You can photograph and view images while the camera is set in the
docking station.
Do not charge the battery pack immediately after the camera has been
in continuous use for a long time
i The battery pack becomes hot when the camera is used continuously for a
long time. If you attempt to charge the battery pack in this state, the multi-
indicator may flash red and it may not be possible to charge the battery
pack. Wait until the battery pack has cooled down before attempting to
charge it.
Does the battery pack appear swollen?
i The lithium-ion battery used in this camera may expand slightly when
stored in a hot environment or repeatedly used, but this is not a safety
hazard.
HINT
About the internal backup battery
i This camera’s internal battery serves to maintain the date and time
settings, as well as the shooting settings. The backup battery will be fully
charged when the battery pack is kept in the camera continuously for about
2 days. In the fully charged state, the backup battery will maintain the
camera settings for about 7 days.
When not using the camera for a long time, remove the battery pack
i A small amount of power is still used even if the camera is turned off, and it
is therefore recommended that the battery pack be removed from the
camera if it is not going to be used for a long time. Note that when the
battery pack is removed for a long period, the time and date settings may
be cleared. Before using your camera again, be sure to confirm that the
camera settings are correct.
To prolong the life of the battery pack
i Although the battery pack is an expendable item, you can maximize the life
of the battery by heeding the following suggestions.
h Do not leave the battery under the hot summer sun or exposed to other
high-temperature environments.
h Do not continually recharge the battery when it is already fully charged.
After fully charging it once, for example, use it for a while to partially
discharge it before recharging it again.
h When the battery is not to be used for a long time, if possible store the
partially charged (not fully charged) battery in a cool environment.
English 36
PREPARING THE POWER
When using a power outlet
Power to the camera can be supplied from a power outlet if the docking
station or the AC adaptor is used.
Using the AC adaptor
To reduce spurious
radiation
i Please affix a small core
(supplied) to the cable.
DC IN
terminal
cover
DC IN terminal
To reduce spurious
radiation
i Please affix a large core
(supplied) to the cable.
3 cm (1.18 in.) or less
Supplied AC adaptor
Power cord
To power outlet
37 English
Using the docking station
Use the supplied AC adaptor and power cord to connect the docking station
to a power outlet, and set the camera in the docking station.
To reduce spurious
radiation
i Please affix a small core
(supplied) to the cable.
Docking
station
To reduce spurious
radiation
i Please affix a large core
(supplied) to the cable.
3 cm (1.18 in.) or less
Supplied AC adaptor
Power cord
To power outlet
English 38
PREPARING THE POWER
About recharging
Recharging takes place only when the camera is turned off, or when the
power save function or the sleep function has been activated. Recharging
does not take place when the camera is in the shooting mode or playback
mode.
39 English
TURNING THE CAMERA ON AND
OFF
Turning on the camera
1
Set the REC/PLAY switch.
To shoot pictures:
Set to REC.
REC/PLAY switch
To play back images:
Set to PLAY.
2
3
Open the monitor unit.
Playback
Recording
Press the ON/OFF button for
at least 1 second.
h The camera turns on.
h If the date and time have not
been set, the screen to set
the date and time is shown
on the monitor.
Monitor unit
Monitor
ON/OFF button
English 40
TURNING THE CAMERA ON AND OFF
Turning on the camera when the power save
(sleep) mode is active
In order to preserve battery pack power, the power save (sleep) function
will automatically turn off the camera after 1 minute of no use during
shooting, or 5 minutes of no use during playback (factory-preset
setting).
i When the power save mode is active, you can restore the power by any of
the following methods:
h Move the REC/PLAY switch.
h Press the ON/OFF button.
h Press the [
] or [
] button.
h Press the SET or MENU button.
h Push the zoom switch.
h Move the SIMPLE/NORMAL switch.
h Press the FULL AUTO button.
*
When the MENU button is used to turn on the camera, the screen to set
the operation sounds (page 144) appears.
i After the power save mode has been active for about 1 hour, the camera
will switch to the standby mode. In this case, you can restore the power by
pressing the ON/OFF button, or by closing and then opening the monitor
unit.
i When the AC adaptor is connected, the power save mode will become
active about 10 minutes after the camera is turned on (factory-preset
setting).
i The user can specify the time elapsed before the power save mode is
activated (page 160).
i When the camera is connected to a computer or printer, the power save
mode becomes active after about 12 hours.
Turning off the camera
1
Press the ON/OFF button for at least 1 second.
h The camera turns off.
41 English
HINT
To immediately activate the power save mode
i Press the ON/OFF button briefly to active the power save function.
About the standby mode
i To turn off the camera only briefly, you can close the monitor unit to put the
camera in the standby mode. The standby mode uses almost no power.
When the monitor unit is opened again, the camera turns on immediately
and you are ready to shoot or view images without any delay.
If the date and time setting has been completed (page 43)
i The current time is shown on the monitor when the REC/PLAY switch is set
to REC and the camera is turned on.
CAUTION
If the K icon appears...
i When a picture is taken, the date and time it was captured are recorded
with it. If the date and time settings have not been completed (page 43),
the date and time cannot be recorded with the captured images. For this
reason, immediately after the camera is turned on, the “Set date and time”
reminder briefly appears, after which the K icon is shown on the
Shooting Screen. To have the date and time recorded with the images,
please complete this setting before capturing images.
English 42
DATE AND TIME SETTING
The camera will record the date and time an image or audio recording is
taken so that you can display them during playback. Therefore, before
capturing images, make sure the correct date and time are set.
Example: To set the clock to 7:30 p.m. on December 24, 2007
1
Turn on the camera (page 40),
and press the SET button.
h The Clock Set Screen appears.
h The current date and time
settings are shown.
h Follow the procedures below to
enable or disable the date
display during playback, to set
the display format for the date,
and to set the date and time.
h To display the Recording or
Playback Screen, press the
MENU button 2 times.
CLOCK SET
DATE
TIME
DISP
2007/09/01
00:00
Y / M / D
OK
2
Set the date.
1 Select “DATE”.
2 Press the SET button.
h The Set Date Screen
appears.
CLOCK SET
DATE
2007/12/24
3 Set the date to “2007/12/24”.
h The date is set in the
following order: Set the year
→ Set the month → Set the
day.
OK
h Toggle the SET button left or
right to select year, month or
day. Toggle the SET button up
or down to increase or
decrease the number.
4 Press the SET button.
43 English
3
4
Set the clock.
1 Select “TIME”.
2 Press the SET button.
h The Set Time Screen
appears.
3 Set the time to “19:30”.
h The time is set in the
following order: Set the hour
→ Set the minute.
h A 24-hour clock is used for
the time display.
4 Press the SET button.
CLOCK SET
TIME
19:30
OK
Set the order in which the date is
displayed during playback.
1 Select “DISP”.
CLOCK SET
2 Press the SET button.
h The Set Date Format Screen
appears.
3 Toggle the SET button up or
down.
DISP
OK
Y / M / D
h Toggle the SET button up to
change the displayed date
order as follows:
Y / M / D → M / D / Y → D / M / Y
Toggle the SET button down to change it in the reverse order.
4 Press the SET button.
English 44
DATE AND TIME SETTING
5
Press the MENU button.
h The date and time setting is completed.
h To display the Recording or Playback Screen, press the MENU button.
HINT
i Under normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost (the backup will last for about
7 days). It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow step 1).
To correct the date and time settings
i After step 1, select the line of the setting that you want to change, press
the SET button, and follow the steps in the respective paragraphs above to
change the setting.
45 English
SWITCHING BETWEEN THE SHOOTING
MODE AND PLAYBACK MODE
Switch between the shooting mode (for recording) and the playback mode (for
viewing your recorded images).
1
2
Turn on the camera (page 40).
REC/PLAY button
Set the REC/PLAY switch to the
desired mode.
For recording:
Set it to REC.
For playback:
Set it to PLAY.
Shooting
mode
Playback
mode
362
0000::0055::0088
F1.8
1/30
<Example of the shooting
mode>
PLAY
2007.112.24
<Example of the playback
mode>
English 46
SIMPLE MODE/NORMAL MODE
About the SIMPLE mode and NORMAL mode
The “SIMPLE mode” comprises only those functions that are most often used
and necessary to operate the camera, while the “NORMAL mode” enables
full use of all the camera’s many functions. Select the mode that is suitable for
your purposes.
RECORDING MENU1
MOVIE
1
Select movie and
photo size
2
3
1
2
3
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
OK
<NORMAL Mode Setting
Screen>
<SIMPLE Mode Setting
Screen>
47 English
Switching between the SIMPLE and NORMAL
modes
Use the SIMPLE/NORMAL switch, located next to the monitor, to switch
between the SIMPLE and NORMAL modes.
1
Set the SIMPLE/NORMAL switch to the desired mode.
SIMPLE mode:
Set it to SIMPLE.
NORMAL mode:
Set it to NORMAL.
SIMPLE/NORMAL switch
SIMPLE mode
NORMAL mode
English 48
SIMPLE MODE/NORMAL MODE
Accessing/exiting the SIMPLE/NORMAL Mode
Menu Screen
1
Set the camera to the shooting or playback mode.
h Use the REC/PLAY switch to select the shooting mode or playback
mode.
To access the Shooting Menu:
Set the switch to REC.
To access the Playback Menu:
Set the switch to PLAY.
REC/PLAY switch
Shooting mode
Playback mode
362
0000::0055::0088
F1.8
1/30
<Shooting mode>
PLAY
2007.112.24
<Playback mode>
49 English
2
Set the camera to the SIMPLE mode or NORMAL mode.
h Use the SIMPLE/NORMAL switch to select the desired mode.
To select the SIMPLE mode:
Set the switch to SIMPLE.
To select the NORMAL mode:
Set the switch to NORMAL.
SIMPLE/NORMAL switch
SIMPLE mode
NORMAL mode
362
0000::0055::0088
F1.8
1/30
<Example: NORMAL Mode
Shooting Screen>
443
00:05:16
<Example: SIMPLE Mode
Shooting Screen>
English 50
SIMPLE MODE/NORMAL MODE
3
Press the MENU button.
h The Menu Screen for the mode you selected in steps 1 and 2 appears
on the monitor.
Display the SIMPLE Mode Setting Menu → go to page 52, step 4.
Display the NORMAL Mode Setting Menu → go to page 53, step 4.
h To cancel the Menu Screen, press the MENU button.
MENU button
RECORDING MENU1
MOVIE
1
2
3
1
2
3
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
<Example: NORMAL Mode
Shooting Menu>
Select movie and
photo size
OK
<Example: SIMPLE Mode
Shooting Menu>
51 English
To access the SIMPLE Mode Setting Menu Screen
4
Toggle the SET button up or down to select the item you wish to
change, and press the SET button.
h The Setting Screen for the selected item appears.
Select an item to change
Description of selected item
Select movie and
photo size
OK
To keep in HDTV size
HDTV size
3.5M [16:9]
OK
<Setting Screen>
English 52
SIMPLE MODE/NORMAL MODE
To access a NORMAL Mode Setting Menu
4
Toggle the SET button up or down to select a tab.
h The Menu Screen for the selected tab appears.
Tab
RECORDING MENU1
MOVIE
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
1
2
3
1
2
3
5
Toggle the SET button to the right.
RECORDING MENU1
MOVIE
1
2
3
1
2
3
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
53 English
6
Toggle the SET button up or down to select the item you wish to
change, and press the SET button.
h The Setting Screen for the selected item appears.
h To return to the Menu Screen, press the MENU button.
Select an item to change
RECORDING MENU1
MOVIE
1
2
3
1
2
3
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
Applicable mode
PHOTO
3264×2448
2288×1712
2288×1712
2496×1408 [16:9]
1920×1080 [16:9]
OK
<Setting Screen>
HINT
About the applicable mode indicator
i This indicator shows the shooting mode(s) for which the selected setting is
effective.
: This setting is effective during still image shooting.
: This setting is effective during video clip recording.
: This setting is effective during still image shooting and video clip
recording.
English 54
SIMPLE MODE/NORMAL MODE
Overview of the SIMPLE Mode Setting Screen
SIMPLE Mode Shooting Menu
Select movie and
1
photo size
2
3
4
OK
55 English
1 Recording size (page 71)
h Select the video clip size to
record.
3 Flash (page 77)
h Specify how the flash will
operate.
9: The camera detects the
subject brightness and
uses the flash only when
necessary.
:: The flash operates with
every image captured
regardless of the
4
: The recorded video clip size
will be 1920 × 1080 pixels, and
the captured still image size
will be 2496 × 1408 (16:9)
pixels.
conditions.
5
;: The flash does not operate
even in dark situations.
<: The camera detects the
subject brightness and
uses the flash only when
required. At this time the
flash operates in a manner
that reduces the red
: The video clip size will be
640 × 480 pixels, and the still
image size will be 2288 × 1712
(4:3) pixels.
6
: The video clip size will be
320 × 240 pixels, and the still
image size will be 640 × 480
(4:3) pixels.
reflection (“red-eye”) in the
subject’s eyes.
4 Remaining battery power
2 Focus range (page 72)
h Select the focus range that
corresponds to the distance to
the subject.
indication (page 170)
7: The camera automatically
focuses on the subject
within a range of 80 cm
(31.50 in.) to infinity
(normal).
8: The camera focuses on a
subject within a range of
1 cm (0.39 in.) to 1.0 m
(3.28 ft.) (super macro).
English 56
SIMPLE MODE/NORMAL MODE
SIMPLE Mode Playback Menu
1
2
3
Start slideshow
OK
4
57 English
1 Slideshow (page 86)
h Specify the slideshow settings
and play the slideshow.
3 Delete (page 88)
h Delete files.
4 Remaining battery power
2 Playback volume (page 87)
h Adjust the volume for video
clip and audio files playback.
indication (page 170)
English 58
SIMPLE MODE/NORMAL MODE
Overview of the NORMAL Mode Setting Screen
NORMAL Mode Shooting Menu
<Tab 1>
RECORDING MENU1
MOVIE
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
1
1
2
3
1
2
2
3
4
5
6
7
3
59 English
1 Video clip settings (page 93)
<HD mode>
k: Snow & beach mode
+: Fireworks mode
Q: Lamp mode
!: Record at 1920 × 1080
pixels, 60 fields/s.
4 Filter (page 101)
&: No filter
": Record at 1280 × 720
pixels, 60 fps.
&: Record at 1280 × 720
pixels, 30 fps.
%: Cosmetic filter
W: Monochrome filter
,: Sepia filter
<SD mode>
5 Flash (page 102)
k: The camera will detect the
subject brightness and use
the flash only when
(: Record at 640 × 480 pixels,
60 fps.
): Record at 640 × 480 pixels,
30 fps
l: Record at 320 × 240 pixels,
30 fps.
necessary.
m: The flash will operate with
every image captured
regardless of the
<: Make an audio recording.
2 Still image settings (page 94)
J: Image size is 3264 × 2448
pixels.
conditions.
l: The flash will not operate
even in dark situations.
n: The camera will detect the
subject brightness and use
the flash only when
M: Image size is 2288 × 1712
pixels (low compression).
L: Image size is 2288 × 1712
pixels (normal
required. At this time the
flash will operate in a
manner that reduces the
red reflection (“red-eye”) in
the subject’s eyes.
compression).
*: Image size is 2496 × 1408
pixels (16:9 aspect ratio).
+: Image size is 1920 × 1080
pixels (16:9 aspect ratio).
G: Image size is 1600 × 1200
pixels.
6 Self-timer (page 103)
O: Self-timer is off.
y: Shooting begins 2 seconds
,: Image size is 1280 × 720
pixels (16:9 aspect ratio).
[: Image size is 640 × 480
pixels.
after the [
] or [
]
button is pressed.
x: Shooting begins
10 seconds after the [
]
P: Image size is 2288 × 1712
pixels.
or [
] button is pressed.
7 Remaining battery power
3 Scene select (page 99)
=: Full auto setting
a: Sports mode
(page 170)
>: Portrait mode
+: Landscape mode
/: Night view portrait mode
English 60
SIMPLE MODE/NORMAL MODE
<Tab 2>
RECORDING MENU2
MOVIE STABILIZER
PHOTO STABILIZER
FOCUS
FOCUS MODE
EXP MEASURE
ISO
1
1
2
3
4
5
6
7
2
3
1
2
3
61 English
1 Movie stabilizer (page 105)
h Compensate for camera shake
during video clip recording.
\: Record with image
stabilizer on.
5 Light-measuring mode
(page 110)
X: Multi-section light
measuring
W: Center-weighted light
measuring
]: Record without image
stabilizer.
Y: Spot light-measuring
2 Photo stabilizer (page 105)
h Compensate for camera shake
during still image shooting.
\: Shoot with image stabilizer
on.
6 ISO sensitivity (page 111)
=: Sensitivity is set
automatically (video clip
recording: ISO 50 to 400;
still image shooting: ISO 50
to 200)
]: Shoot without image
stabilizer.
*: Sets sensitivity to ISO 50
u: Sets sensitivity to ISO 100
v: Sets sensitivity to ISO 200
w: Sets sensitivity to ISO 400
6: Sets sensitivity to ISO 800
-: Sets sensitivity to ISO 1600
(video clip recording:
ISO 800)
z: Sets sensitivity to ISO 3200
(video clip recording:
3 Focus range (page 107)
h Select the focus range that
corresponds to the distance to
the subject.
-: The camera automatically
focuses on the subject
within a range of 10 cm
(3.94 in.) to infinity (total
range).
*: The camera automatically
focuses on the subject with
a range of 80 cm (31.50 in.)
to infinity (normal).
ISO 800)
* The indicated ISO value is the
standard output sensitivity.
7 Remaining battery power
-: The focus can be set
manually.
(page 170)
+: The camera focuses on the
subject within a range of
1 cm (0.39 in.) to 1.0 m
(3.28 ft.) (super macro).
4 Focus area (page 109)
B: 9-point range finder focus
C: Spot focus
English 62
SIMPLE MODE/NORMAL MODE
<Tab 3>
RECORDING MENU3
WHITE BALANCE
EXPOSURE
DIGITAL ZOOM
FACE CHASER
HIGH SENSITIVITY
1
1
2
3
4
5
2
3
1
2
3
6
63 English
1 White balance (page 113)
=: White balance is
automatically adjusted
depending on the ambient
lighting (auto).
3 Digital zoom (page 116)
Q: Enable the digital zoom.
B: Disable the digital zoom.
4 Face chaser (page 117)
-: Enable face chaser.
.: Disable face chaser.
r: For shooting in sunny
conditions (fair)
o: For shooting in overcast
conditions (cloudy)
p: For shooting under
fluorescent lighting
5 High sensitivity mode
(page 118)
1: Increased sensitivity
2: Normal sensitivity
(fluorescent)
6 Remaining battery power
q: For shooting under
incandescent lighting
(incandescent)
indication (page 170)
^: For setting the most
accurate white balance
(one push)
2 Exposure (page 114)
@: The exposure is set
automatically.
T: Set the shutter speed
manually.
g: Set the aperture manually.
H: Set the aperture and
shutter speed manually.
English 64
SIMPLE MODE/NORMAL MODE
NORMAL Mode Playback Menu
<Tab 1>
PLAYBACK MENU1
1
1
2
3
4
5
6
7
SLIDESHOW
PLAY VOLUME
PROTECT
DELETE
PRINT INSTRUCTIONS
ROTATE
2
1
2
3
1 Slideshow (page 120)
h Specify the slideshow settings
4 Delete (page 88)
h Delete files.
and play the slideshow.
5 Printing instructions
(page 123)
h Specify the printing
2 Playback volume (page 87)
h Adjust the volume for video
clip and audio files playback.
instructions (DPOF settings).
3 Protect (page 122)
h File protect setting (delete
prohibited)
6 Rotate (page 129)
h Rotate a still image.
7 Remaining battery power
(page 170)
65 English
<Tab 2>
PLAYBACK MENU2
RESIZE
1
1
2
3
4
5
2
EXTRACT STILL
EDIT VIDEO
SELECT FOLDER
COPY
1
2
3
6
1 Resize (page 130)
h Reduce the resolution of a still
image.
2 Extract still image (page 131)
h Extract a still image from a
video clip.
4 Select folder (page 91)
h Select a folder to play back.
5 Copy
h Used for the Xacti Library
feature.
6 Remaining battery power
3 Video clip edit (page 132)
indication (page 170)
h Edit video clips.
English 66
FULL AUTO MODE
In the full auto mode, you can record files using the settings in effect at the
time of shipment from the factory. However, even if you set the camera to the
full auto mode, the settings you specified in the SIMPLE mode and NORMAL
mode are retained, so your specified settings will be restored when you quit
the full auto mode.
FULL AUTO button
i Inoperative during playback.
i If you change the shooting settings or
option settings when in the full auto
mode, the camera changes to the
NORMAL mode.
Normal mode
HD-SHQ
443
00:06:57
Press
ISO200
F1.8
1/30
Full auto Mode
Full-HD
377
00:05:15
F1.8
1/30
Press
The full auto icon is shown.
67 English
SIMPLE
SHOOTING
SIMPLE/SHOOTING
BEFORE TAKING PICTURES
For best results
Hold the camera securely, keeping your elbows close to your body and
making sure the camera is stable.
Correct hold
Incorrect hold
<Holding the camera>
Example 1:
A finger is blocking the
lens or flash.
Grip the camera by wrapping
the fingers of the right hand,
from the little finger to the
middle finger, around the
camera, and hook the index
finger above the lens.
Example 2:
Grip the camera by wrapping
the fingers of the right hand,
from the little finger to the
index finger, around the
camera.
Make sure that the lens and flash are not blocked by your fingers or the
handstrap.
English 68
BEFORE TAKING PICTURES
Using the autofocus
The autofocus will work in almost all situations; however, there are
certain conditions that may cause the autofocus function to not work
properly. If the autofocus function is not working properly, set the focus
range to capture images (page 72).
k Conditions that may cause incorrect focus
The following examples are some of the situations where the autofocus
function may not work.
i Subjects with low contrast, very
bright subjects at the center of the
image or dark subjects or locations
Use the focus-lock function to lock the
focus on an object with contrast at the
same distance as the desired subject.
i Subjects without vertical lines
Use the focus-lock function to lock the
focus while framing the subject
vertically, then re-orient the camera to
compose a horizontally framed image.
69 English
The following examples are some of the situations where the autofocus
function may work, but not as desired.
i When both near and far objects are
present
Use the focus-lock function to lock the
focus on an object at the same distance
as the desired subject, then reposition
the camera to compose the picture.
i Fast-moving subjects
Use the focus-lock function to lock the
focus on an object at the same distance
as the desired subject, then reposition
the camera to compose the picture.
HINT
i Images captured in the still image shooting mode can be rotated when
they are played back (page 129).
i When the [
] button is pressed halfway, the image in the monitor may
waver vertically. This is the result of internal image processing and is not a
malfunction. This wavering is not recorded and will not affect your images
in any way.
i When the optical zoom is used or when the autofocus is operating, the
image may appear to waver, but this is not a malfunction.
English 70
BEFORE TAKING PICTURES
Select the recording size
The larger the image size (number of pixels), the better the image quality will
be, but the file size will also be larger. Select the image quality that is correct
for the intended purpose.
1
Display the SIMPLE Mode Shooting Menu (page 49), select the
recording size setting, and press the SET button.
To keep in HDTV size
HDTV size
3.5M [16:9]
OK
4: The recorded video clip size will be 1920 × 1080 pixels, and the
captured still image size will be 2496 × 1408 (16:9) pixels.
5: The video clip size will be 640 × 480 pixels, and the still image size
will be 2288 × 1712 (4:3) pixels.
6: The video clip size will be 320 × 240 pixels, and the still image size
will be 640 × 480 (4:3) pixels.
2
Select the desired video clip recording size, and press the SET
button.
h This completes the recording size setting.
71 English
Select the focus setting
Select the focus range corresponding to the distance between the camera
and the subject.
1
Display the SIMPLE Mode Shooting Menu (page 49), select the focus
setting, and press the SET button.
All ranges
Automatic focus
(people, landscape, etc.)
OK
7: The camera automatically focuses on the subject within a range of
80 cm (31.50 in.) to infinity (normal).
8: The camera focuses on a subject within a range of 1 cm (0.39 in.) to
1.0 m (3.28 ft.) (super macro).
2
Select the desired focus range, and press the SET button.
h This completes the focus range setting.
English 72
BEFORE TAKING PICTURES
Hints for taking pictures
Muting the operation sounds
i The operation sounds that are generated, for example, when the [
button, MENU button or SET button is pressed, as well as the audio
guidance when you switch the mode, can be muted (page 144).
Where are the image and audio files saved?
i All the image and sound files are recorded on the card installed in the
camera.
]
Taking pictures in backlight conditions...
i When taking pictures with the light coming from behind the subject, due to
the characteristics of the lens, ghost patterns (flare phenomenon) may
appear in the captured image. In this situation, it is recommended that you
avoid taking pictures with the subject lit from behind.
While the image files are being recorded...
i While the multi-indicator is flashing red, the image files are being written to
the memory, during which time it is not possible to capture another image.
Another image can be captured after the flashing red indicator turns off.
However, even when the multi-indicator is flashing red, depending on the
camera’s internal memory remaining capacity, in some cases the next
image can be captured about 2 seconds after shooting.
Checking the last image shot (instant review)
i After shooting a picture, you can immediately view it by pressing the SET
button once.
i During instant review of a video clip, normal play, reverse play and pause
are available (page 84).
i If you wish to delete the image (for a video clip, it must be in the pause or
stop mode), toggle the SET button up to access the delete function.
i You can view other images while the instant review display is showing by
toggling the SET button to the left or right.
i Cancel the instant review display by toggling the SET button down.
73 English
VIDEO CLIP RECORDING
1
Turn on the camera
(page 40), and set it to the
shooting mode (page 46).
[
] button
2
Press the [
h Recording begins.
] button.
h It is not necessary to
keep the [
] button
pressed while shooting.
h When the remaining
recording time available
for the currently recording
clip becomes little, a
countdown of the
remaining recording time
appears on the display.
3
End the recording.
h Press the [
] button
again to stop recording.
Recording time
Full-HD
REC 00:00:09
5
Available recording time
remaining
English 74
SHOOTING SINGLE SHOTS
Capture a still image (single-shot).
1
2
Turn on the camera (page 40),
and set it to the shooting mode
(page 46).
[
] button
Press the [
1 Press the [
halfway.
] button.
] button
h The autofocus operates,
and the image is focused
(focus lock).
2 Continue to gently press
the [
way.
] button all the
h The shutter releases and
the image is captured.
h You can view the captured
image on the monitor by
keeping the [
] button
depressed when you
capture the image (post-
view [page 146]).
1
2
F1.8
1/30
Target mark
Shutter speed
Aperture
75 English
HINT
Adjusting the monitor brightness
i While the Shooting Screen is active, you can quickly access the screen for
adjusting the brightness of the monitor (page 153) by pressing the MENU
button for at least 1 second.
What is the camera focusing on?
i A target mark & on the monitor
shows the area the camera is
focusing on.
Target mark
i The camera automatically
determines the correct focus by
measuring from 9 different focus
points within the shooting area. If the
target mark is at a position that is
different from the point you wish to
focus on, you can refocus, for
example, by changing the shooting
angle.
F1.8
1/30
Camera shake icon
Shutter speed
Aperture
i The large target mark appears when
the camera focuses on a wide area
in the center of the screen.
The focus can be locked
i By assigning an operation shortcut to the SET button (page 148), the
autofocus can be set to a fixed focus. When the autofocus is fixed, the p
icon appears on the monitor.
i When the focus range (page 72) setting is changed, the focus lock is
released.
The shutter speed and aperture are displayed
i The shutter speed and aperture settings are shown on the Shooting
Screen. You can use them as a reference when shooting.
If the camera shake icon > appears...
i During still image shooting, if the shutter speed is slow and the possibility
that the image may be blurred due to camera shake becomes high, the
camera shake icon may appear on the monitor. In this case, use a tripod to
stabilize the camera when shooting, or set the flash operation mode to
automatic (page 77).
i When shooting with the scene select function set to the fireworks +
mode, the camera shake icon always appears, but this is normal.
English 76
SHOOTING SINGLE SHOTS
Using the flash
The flash is not only used for photographing under dark conditions, but is also
convenient for example when the subject is in shadow or lit from behind. Your
camera is equipped with four flash modes: red-eye reduction, auto flash,
forced flash, and no flash. Select the flash mode that is suitable for the
shooting conditions. The flash is available only when shooting single-shot still
images.
1
2
Press the m button to open the
flash unit.
h The flash unit opens.
Display the SIMPLE Mode Shooting Menu (page 49), select the flash
setting, and press the SET button.
h The screen to select the flash operation appears.
Auto
Flash automatically
OK
9: The camera detects the subject brightness and uses the flash only
when necessary.
:: The flash operates with every image captured regardless of the
conditions.
;: The flash does not operate even in dark situations.
<: The camera detects the subject brightness and uses the flash only
when required. At this time the flash operates in a manner that
reduces the red reflection (“red-eye”) in the subject’s eyes.
77 English
3
4
Select the desired flash operation, and press the SET button.
h This completes the flash operation setting.
Press the [
] button to take the picture.
CAUTION
Do not touch the flash unit when shooting
i The flash unit becomes very hot and may cause a burn. Avoid touching the
flash unit when shooting.
HINT
i The flash cannot be used during video clip recording.
i By assigning an operation shortcut to the SET button (page 148), you can
change the flash mode from the Shooting Screen (in the NORMAL mode).
English 78
SHOOT A STILL IMAGE WHILE
RECORDING A VIDEO CLIP
You can capture a still image (a single-shot) while recording a video clip.
1
Turn on the camera
(page 40), and set it to the
shooting mode (page 46).
[
] button
[
] button
2
3
Press the [
] button.
When you see a scene
you’d like to capture as a
still image. press the
[
] button.
4
Press the [
end the video clip
recording.
] button to
Full-HD
REC 00:00:09
79 English
HINT
i When shooting a still image while recording a video clip, the flash does not
operate.
i The photo stabilizer (page 105) and the face chaser feature (page 117) are
inoperative.
i When the remaining video recording time becomes approximately
50 seconds, it will no longer be possible to capture a still image while
recording a video clip. The exact remaining recording time at which this
occurs will differ depending on the subject and on the video clip mode
setting (page 93). If you intend to capture a still image while recording a
video clip, it is suggested that you take note of the remaining video
recording time.
About the recording size of still images
i The size of a still image captured during video clip recording depends on
the video clip recording size.
Video clip recording size setting
Still image recording size
!
+ (16:9)
"
&
, (16:9)
(
)
l
[ (4:3)
English 80
MACRO-PHOTOGRAPHY (ZOOM)
Your camera has two zoom functions: optical zoom and digital zoom.
1
2
Point the camera lens at the
subject.
Zoom switch
Push the zoom switch toward
[T/]] or [W/P] to compose
the desired image.
[T/]]: Zoom in on the subject.
[W/P]: Zoom out.
h When the zoom switch is
pushed, the zoom bar appears
on the monitor.
h When moving the optical
zoom, push the zoom switch
lightly to zoom slowly, and
press more strongly to zoom
quickly.
h When the optical zoom factor
is at maximum, zooming stops
temporarily. When the zoom
switch is pushed toward the
[T/]] side again, the mode
changes to the digital zoom
mode and zooming continues.
Monitor
Zoom bar
Magnification
When both
optical and digital
zoom are enabled
Optical zoom
Digital zoom (yellow)
When optical
zoom only is
enabled
Pointer
3
Take the picture.
For video clip recording, see page 74.
For shooting single shots, see page 75.
For shooting sequential shots, see page 95.
81 English
SHOOTING AND PLAYBACK WITH
THE REMOTE CONTROL UNIT
The remote control sensor on your camera makes it possible to capture
images and play them back using the supplied remote control unit.
1
2
Prepare the remote control unit (page 30).
Turn the camera on, and set the REC/PLAY switch to REC or PLAY.
h Set the REC/PLAY switch to REC for shooting, or to PLAY for
playback.
3
4
Aim the remote control unit at the camera’s remote control sensor.
h Open the monitor unit.
Press the buttons on the remote control unit to operate the camera
(page 26).
English 82
PLAYBACK
SIMPLE/PLAYBACK
PLAYING BACK VIDEO CLIPS AND
STILL IMAGES
1
2
Set the camera to the playback mode (page 46).
Toggle the SET button to the left or right to display the image you
wish to play back.
h Video clips are indicated by a video clip pattern along the left and right
sides of the screen.
PLAY
2007.112.24
Video clip
pattern
<Example: After recording
a video clip>
SET button
2007.112.24
<Example: After capturing
a still image>
3
For a video clip, press the SET button.
h Playback begins.
83 English
To do this...
Do this
Normal forward playback Press the SET button.
Stop playback
Pause
During playback, toggle the SET button down.
During playback, press the SET button or
toggle the SET button up.
During accelerated playback, toggle the SET
button up.
To playback
one image
at a time
(single-
frame step)
Duringforward After pausing playback, toggle the SET button
playback to the right.
During reverse After pausing playback, toggle the SET button
playback to the left.
Duringforward After pausing playback, press and hold the
playback SET button to the right.
During reverse After pausing playback, press and hold the
Slow
playback
playback
SET button to the left.
During forward playback, toggle the SET
button to the right.
* The playback speed changes each time the
SET button is toggled to the right, as follows:
Normal playback → 2× → 5× → 10× → 15×
Toggle the SET button to the left to resume
normal playback speed.
During forward playback, toggle the SET
button to the left.
Forward
playback
To
accelerate
playback
* The playback speed changes each time the
SET button is toggled to the left, as follows:
15× ← 10× ← 5×
Toggle the SET button to the right to resume
normal playback speed.
Reverse
playback
Return to normal playback
speed
Press the SET button.
Louder: During playback, push the zoom
switch toward the [T] side.
Softer: During playback, push the zoom
Adjusting the volume
switch toward the [W] side.
When you are finished using the camera...
i Press the ON/OFF button to turn the camera off.
English 84
PLAYING BACK VIDEO CLIPS AND STILL IMAGES
HINT
The file for a video clip is very large
i Therefore, be aware that if the video clip is uploaded to a computer to be
played back, the computer may not be able to play back the video fast
enough, making it appear jerky. (The video will always be displayed
properly on the monitor or a television.)
i Depending on the card, shooting may end even before the possible
shooting time indicated.
Display the video clip playback point
i During video clip playback, press the MENU button for at least 1 second to
display a bar showing the current playback point in the video clip.
i Press the MENU button for about 1 second to cancel the bar.
CAUTION
During video clip playback, the sound of a motor is audible...
i During recording, the sound of the optical zoom movement or autofocus
movement was recorded. This is not a malfunction.
If no audio is heard...
i The audio is not played back when the video clip is played back in the
frame-by-frame, fast playback or reverse playback mode.
85 English
SLIDESHOW PLAYBACK
You can play back files in succession with the “slideshow playback” feature.
1
Display the SIMPLE Mode
Playback Menu (page 49), select
the slideshow setting, and press
the SET button.
SLIDESHOW
ALL
START>>>
MOVIE
PHOTO
=: Play back all files.
3: Play back video clips and audio
files.
OK
c: Play back still image files.
2
Select the type of file to play back,
and press the SET button.
h Slideshow playback begins.
h To stop slideshow playback, press
the SET button or MENU button.
HINT
About the slideshow settings
i During slideshow playback, the BGM that was set for the slideshow from
the NORMAL Mode Playback Menu is played. To change the BGM, display
the NORMAL Mode Playback Menu and change the BGM setting for the
SLIDESHOW (page 120).
i For slideshows played in the SIMPLE mode, the transition effect is fixed at
FADE and the transition interval is fixed at 2 SEC.
English 86
PLAYBACK VOLUME
Adjust the playback volume for video clips and audio files.
1
Display the SIMPLE Mode
PLAY VOLUME
Playback Menu (page 49), select
the playback volume setting, and
press the SET button.
h The volume control bar appears.
14
VOLUME SETTING
2
Toggle the SET button to the left
or right to set the volume, and
press the SET button.
h The playback volume is set, and
the display returns to the SIMPLE
Mode Playback Menu.
HINT
The volume can be adjusted during playback
i During video clip or audio file playback, if you move the zoom switch, the
volume control bar will appear, allowing you to adjust the volume.
In the NORMAL mode
i When you select “PLAY VOLUME” from the NORMAL Mode Playback
Menu and press the SET button, the volume control bar appears.
87 English
DELETING FILES
You can delete files if you no longer need them. You can delete the files one
at a time, or all at once.
1
Display the SIMPLE Mode
Playback Menu (page 49), select
the delete c icon, and press the
SET button.
DELETE SINGLE:
Deletes one file at a time.
DELETE ALL:
DELETE
DELETE SINGLE
DELETE ALL
Deletes all files.
OK
2
Select the desired delete mode, and press the SET button.
h The Delete Confirmation Screen appears.
<DELETE SINGLE>
h Toggle the SET button to the left or right to select the file you wish to
delete.
h There is no confirmation screen when deleting single files. Please
make sure that the displayed image is one you wish to delete.
<DELETE ALL>
h Toggle the SET button to the left or right to confirm the files to delete.
English 88
DELETING FILES
3
Select “DELETE”, and press the SET button.
<DELETE SINGLE>
h The currently displayed file is deleted.
h To delete other files, select the files, select “DELETE” and press the
SET button.
<DELETE ALL>
h The Delete Confirmation Screen again appears. To delete the files,
select “YES”, and press the SET button. When file delete is
completed, “No image” is shown.
HINT
In the NORMAL mode
i When you select “DELETE” from the NORMAL Mode Playback Menu and
press the SET button, the Delete Screen appears.
CAUTION
i Files that are protected from accidental delete cannot be deleted. To delete
protected files, set the protect setting for the files to off (page 122), and
then follow the file delete procedure.
89 English
PLAYBACK MODES
9-image display playback
1
2
Display the image you wish to
play back.
Zoom switch
Push the zoom switch toward
the [W/P] side.
h The 9-image display appears.
3
Select the image to play back.
h Toggle the SET button up,
down, left or right to move the
orange frame to the desired
image, and press the SET
button.
Instead of pressing the SET
button, you can push the
zoom switch toward the
[T/]] side to show the
image full screen.
h If the zoom switch is pushed
toward the [W/P] side while
the 9-image display is shown,
the display changes to the
screen to select the playback
folder (page 91).
SET button
Video
clip
Orange frame
Still image
100
0001
0004
0007
0002
0005
0008
0003
0006
0009
Audio file
Image number
Folder number
English 90
PLAYBACK MODES
Selecting the playback folder
If the card contains multiple folders, you can select from which folder you
would like to play back.
1
2
Display the Playback Screen.
Push the zoom switch toward the
[W/P] side 2 times.
h The screen to select the playback
folder appears.
100
103
101
104
102
105
h If the zoom switch is pushed toward
the [T/]] side, the camera
changes to the 9-image display
(page 90).
FOLDER : 100SANYO
3
Toggle the SET button to the left or
right to move the orange frame to the
desired folder, and press the SET
button.
h The files in the selected folder are
displayed in the Playback Screen.
HINT
In the NORMAL mode
i When you select “SELECT FOLDER” from the NORMAL Mode Playback
Menu and press the SET button, the screen to select the playback folder
appears.
91 English
Magnifying (zooming in) the image
1
2
Display the image that you want to magnify.
h For a video clip, pause playback at the place you want to magnify.
Push the zoom switch toward the
111%
[T/]] side.
h Magnification is enabled.
h The image is magnified, and the
central portion of image is
displayed.
h Toggle the SET button to view
different parts of the magnified
image.
Press shutter to save
100% MOVE
To magnify:
Magnification increases each time the
zoom switch is pushed toward the
[T/]] side.
To return to normal size:
Magnification decreases each time the
zoom switch is pushed toward the
[W/P] side.
h Press the SET button to return to the
normal (100%) view.
HINT
The magnified portion of the image can be saved as a separate image
i Press the [
] button. The magnified portion is saved as a new still
image.
English 92
NORMAL
SHOOTING
NORMAL/SHOOTING
RECORDING SIZE
The image quality of video clips and still images is determined by the
recording size (number of pixels). The larger the recording size, the better the
image quality will be, but the file size will also be larger. Select the recording
size that is correct for the intended purpose.
Movies
You can record video clips in either the HD mode (16:9 horizontal to vertical
aspect ratio) or the SD mode (4:3 aspect ratio). In addition, the higher the
frame rate number, the smoother playback will be. However, as with the
recording size, the file size is also proportionately larger, using up more
memory. This menu is also used when making audio recordings.
1
Display the NORMAL Mode Shooting Menu (page 49), select
“MOVIE”, and press the SET button.
<HD mode>
!: Record video clips at 1920 × 1080 pixels, 60 fields/s.
": Record video clips at 1280 × 720 pixels, 60 fps.
&: Record video clips at 1280 × 720 pixels, 30 fps.
<SD mode>
(: Record video clips at 640 × 480 pixels, 60 fps.
): Record video clips at 640 × 480 pixels, 30 fps.
l: Record video clips at 320 × 240 pixels, 30 fps.
<Audio mode>
<: Make an audio recording (voice memo).
2
Select the desired recording size, and press the SET button.
h This completes the recording size setting.
93 English
CAUTION
When editing video clips...
i In order for video clips to be joined, they must have been photographed in
the same mode.
i Video clips that were photographed in different modes cannot be joined.
Still images
For still images, you can select either the 4:3 or 16:9 horizontal to vertical
aspect ratio. This menu is also used for shooting sequential shots.
1
Display the NORMAL Mode Shooting Menu (page 49), select
“PHOTO”, and press the SET button.
J: Image size is 3264 × 2448 pixels.
M: Image size is 2288 × 1712 pixels (low compression).
L: Image size is 2288 × 1712 pixels (normal compression).
*: Image size is 2496 × 1408 pixels (16:9 ratio).
+: Image size is 1920 × 1080 pixels (16:9 ratio).
G: Image size is 1600 × 1200 pixels.
,: Image size is 1280 × 720 pixels (16:9 ratio).
[: Image size is 640 × 480 pixels.
P: Image size is 2288 × 1712 pixels.
2
Select the desired recording size, and press the SET button.
h This completes the recording size setting.
English 94
RECORDING SIZE
Sequential shots
1
Display the NORMAL Mode Shooting Menu (page 49), select
“PHOTO”, and press the SET button.
2
3
Select P, and press the SET button.
Press the [
] button.
h Shooting begins. Shooting continues as long as the [
] button is
kept pressed.
HINT
i The maximum number of images in a sequential shots sequence is 7.
About the focus when shooting sequential shots
i When sequential shots are captured, the autofocus operates when the
[
] button is pressed halfway, fixing the focus.
Can the flash be used?
i The flash does not operate when shooting sequential shots.
95 English
Audio recording
Your camera can make audio recordings and play them back.
Audio recording
1
2
Display the NORMAL Mode Shooting Menu (page 49), select
“MOVIE”, and press the SET button.
Select <, and press the SET
Remaining time
button.
h The audio recording mode is
enabled.
368
07:47:54
h The menu display is canceled if
the MENU button is pressed.
F1.9
1/34
English 96
RECORDING SIZE
3
Press the [
] button.
h Audio recording begins. During
recording, < appears in the
monitor. It is not necessary to
continue pressing the [
button while recording.
h The maximum time for
Length of recording
REC00:00:06
]
recording a continuous audio
memo is about 13 hours.
4
End the recording.
h Press the [
] button again to stop recording.
HINT
You can capture a still image during an audio recording
i Press the [
] button during audio recording to capture a [ still image.
Audio playback
1
Display the desired audio file.
00:00:00
PLAY
2007.12.24
97 English
2
Play back the recording.
To do this...
Do this
Press the SET button.
Start
playback
Normal
Pause
Press the SET button.
Toggle the SET button up.
playback
Stop
playback
Toggle the SET button down.
During playback, toggle the SET button to
the right.
Each time the SET button is toggled to the
right, the speed increases. If the SET
button is toggled to the left during fast
forward, the speed decreases.
Fast
forward
During playback, toggle the SET button to
the left.
Each time the SET button is toggled to the
left, the speed increases. If the SET button
is toggled to the right during fast reverse,
the speed decreases.
Fast
forward/
Fast
reverse
fast reverse
Pause
Toggle the SET button up.
Return to
normal
playback
Press the SET button.
During playback, push the zoom switch
Louder
Softer
toward the [T/]] side.
Volume
adjustment
During playback, push the zoom switch
toward the [W/P] side.
CAUTION
If no audio is heard...
i The audio is not played back when the audio recording is played back in
the fast playback or fast reverse mode.
English 98
SCENE SELECT
You can select from various preset settings (aperture, shutter speed, etc.) for
specific shooting conditions.
1
Display the NORMAL Mode Shooting Menu (page 49), select
“SCENE SELECT”, and press the SET button.
Shooting mode setting
Scene
Features
Single-
shot
Sequential
shots
setting
Video clip
=
Auto
The camera makes the
optimum settings.
m
m
m
m
m
Capture a split-second
image of a fast-moving
subject.
a
Sports
m
Enhance the three-
dimensional feel of the
subject by blurring the
background.
>
Portrait
m
m
m
m
m
n
m
m
m
+
For beautiful shots of
Landscape distant scenery.
Photograph the subject
/
Night view
portrait
while keeping the
background night
scenery.
For photographing bright
scenes, such as on a ski
slope or at the beach
Snow & beach.
k
Snow &
beach
m
m
m
+
For capturing fireworks at
m
m
n
n
m
m
Fireworks night.
Q
Photograph in low-light
conditions
Lamp
m: Available n: Not available
99 English
2
Select the desired icon, and press the SET button.
h This completes the scene select function setting.
h To return to normal photography, select = from the scene select
menu, and press the SET button.
HINT
i When capturing images using the lamp Q, fireworks + or night view
portrait / setting, use a tripod or other method to stabilize the camera.
i A table showing the limitations for settings corresponding to scene select
icons other than = is on page 208.
English 100
FILTERS
The filter feature changes image characteristics such as color tones, to apply
unique effects to the photographed image.
1
Display the NORMAL Mode Shooting Menu (page 49), select
“FILTER”, and press the SET button.
&: No filter is used (none).
%: Skin tones are enhanced in close-up shots (cosmetic filter).
W: Snap black-and-white photos (monochrome filter).
,: Create a sepia-tone photo (sepia filter).
2
Select the desired icon, and press the SET button.
h This completes the filter setting.
h To return to normal photography, select & from the filter menu, and
press the SET button.
HINT
i A table showing the limitations for settings corresponding to filter icons
other than & is on page 209.
101 English
FLASH OPERATION
1
Press the m button to open the
flash unit.
h The flash unit opens.
2
Display the NORMAL Mode Shooting Menu (page 49), select
“FLASH”, and press the SET button.
k: The camera detects the subject brightness and uses the flash only
when necessary.
m: The flash operates with every image captured, regardless of the
subject brightness.
l: The flash does not operate even in dark surroundings.
n: The camera detects the subject brightness, and if it determines that
the flash is necessary, a pre-flash is emitted, after which the actual
flash is emitted as the image is captured. This has the effect of
minimizing the red reflection (“red-eye”) in the subject’s eyes.
3
4
Select the desired flash operation, and press the SET button.
h This completes the flash operation setting.
Press the [
] button to capture the image.
HINT
i The flash works only when shooting single-shot still images.
English 102
SELF-TIMER
1
Display the NORMAL Mode Shooting Menu (page 49), select “SELF-
TIMER”, and press the SET button.
O: Turns off the self-timer function.
y: The image is captured about 2 seconds after the [
] button is pressed.
x: The image is captured about 10 seconds after the [
] button is pressed.
] button or
] button or
[
[
2
3
Select the desired icon, and press the SET button.
h This completes the self-timer setting.
Take the picture.
103 English
HINT
i By assigning an operation shortcut to the SET button (page 148), you can
set the self-timer from the Shooting Screen.
To pause or cancel the self-timer function...
i If the [
released, the self-timer countdown temporarily stops. Press the [
button or [ ] button one more time to restart the self-timer.
] button or [
] button is pressed again before the shutter is
]
i To cancel self-timer photography, select the O icon from the self-timer
menu, and press the SET button.
i The self-timer is automatically reset to off O after the power save mode
is activated and the camera turned off.
When x is selected...
i When the [
] button or [
] button is
pressed, the multi-indicator will blink for
about 10 seconds, and then the image
is captured. Also, 4 seconds before the
shutter releases, the indication shown in
the illustration appears on the monitor.
If you swivel the monitor unit
to its farthest position, the
image on the monitor will be
inverted.
English 104
MOTION COMPENSATION (IMAGE
STABILIZER)
Your camera can minimize a jittery picture by compensating for unintentional
hand motion.
Compensate for camera shake when recording
movies
1
2
1
2
Display the NORMAL Mode Shooting Menu (page 49), select “MOVIE
STABILIZER”, and press the SET button.
\: Motion compensation is enabled.
]: Motion compensation is not enabled.
Select the desired setting, and press the SET button.
h This completes the movie stabilizer setting.
Compensate for camera shake when shooting
still images
Display the NORMAL Mode Shooting Menu (page 49), select
“PHOTO STABILIZER”, and press the SET button.
\: Motion compensation is enabled.
]: Motion compensation is not enabled.
Select the desired setting, and press the SET button.
h This completes the photo stabilizer setting.
105 English
HINT
If the motion compensation does not seem to be working...
i Due to the mechanical characteristics of this function, it may not be
possible for the camera to compensate for violent motion.
i If the digital zoom (page 81) is being used, the large magnification factor
may make it difficult for the motion compensation function to work correctly.
Can’t set the “photo stabilizer” setting?
i The photo stabilizer is automatically turned off ] after any of the
following operations.
h Pressing the flash button [?] to open the flash unit.
h Setting the exposure to T, g or H (page 114).
h Setting the still image NR (noise reduction) setting (page 150) to “ON”.
h Setting the flicker reduction setting (page 152) to “ON”.
h Starting video clip recording.
h Setting the camera to the sequential shots mode (page 95).
Did the field angle change?
i When motion compensation is enabled, the field angle changes when
capturing still images.
When motion compensation is enabled,
i The following icons are shown on the monitor:
Full-HD
The movie stabilizer is active
The photo stabilizer is active
Both the movie stabilizer and the photo stabilizer
are active
Did the scene select setting change?
i When the motion compensation is set to \, if the scene select setting is
/, + or Q, it will automatically change to =.
English 106
FOCUS RANGE
1
Display the NORMAL Mode Shooting Menu (page 49), select
“FOCUS”, and press the SET button.
h When shooting a subject at a medium to far distance, by setting the
focus range to *, you will find it both easier and faster to focus.
-: Wide end: 10 cm (3.94 in.) to infinity
Tele end: 1 m (3.28 ft.) to infinity (total range mode)
*: 80 cm (31.50 in.) to infinity (normal mode)
-: The focus can be manually set to any distance from 1 cm
(0.39 in.) to 40 m (131.23 ft.), as well as to infinity (manual
focus).
+: 1 cm (0.39 in.) to 1 m (3.28 ft.) (super macro mode: wide end
only)
h When the focus range is set to *, + or -, the corresponding
indication appears on the monitor.
2
Select the desired icon, and press the SET button.
h This completes the focus range setting.
HINT
i When the focus range is set to super macro +, the zoom is temporarily
set to the wide end.
i By assigning an operation shortcut to the SET button (page 148), you can
change the focus range setting from the Shooting Screen.
107 English
How to use the manual focus
1
2
Display the NORMAL Mode Shooting Menu (page 49), select
“FOCUS”, and press the SET button.
Select “MANUAL”, and press the
SET button.
362
00:05:07
h The focus distance adjustment
bar appears.
3
Toggle the SET button to the left
or right to adjust the focus
distance, and press the SET
button.
2.0m
h The focus distance is set, and
you are returned to the Shooting
Screen.
HINT
About the focus range
i The focus distance indication shows the distance between the center of
the lens and the subject.
i In some cases there may be a slight variance between the distance
(numerical figure) you set in the manual focus mode and the actual
distance.
About zoom movement when using the manual focus
i If the focus distance is set to 70 cm (27.56 in.) or less, the zoom changes
to the largest setting that is suitable for that focus distance.
i When the focus distance is set to 70 cm (27.56 in.) or less, the zoom will
function only within the range at which the image is focused.
English 108
FOCUS MODE
You can choose from the following 2 types of autofocus (still image shooting
only):
9-point range finder focus:
The correct focus is determined from 9 different focus points within the
shooting area visible on the monitor. When the image is focused, a target
mark & appears.
Spot focus:
The camera focuses on the subject in the center of the monitor.
1
2
Display the NORMAL Mode Shooting Menu (page 49), select
“FOCUS MODE”, and press the SET button.
B: 9-point range finder focus is selected.
C: Spot focus is selected.
Select the desired icon, and
press the SET button.
h The focus mode is set.
h When the spot focus setting is
selected, the focus mark +
appears in the center of the
monitor.
40
00:02:47
F3.5
1/40
Focus mark
109 English
LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
The light is modulated after sampling from multiple areas of the entire
shooting screen.
Center-weighted light-measuring:
The light is modulated for the entire image after measuring from mostly the
center area.
Spot light-measuring:
You can compose the picture and capture the image after first modulating the
light only at the center spot of the monitor.
1
2
Display the NORMAL Mode Shooting Menu (page 49), select “EXP
MEASURE”, and press the SET button.
n: Multi-section light-measuring
W: Center-weighted light-measuring
Y: Spot light-measuring
Select the desired light-
measuring mode, and press the
SET button.
Full-HD
40
00:02:47
h This completes the light-
measuring mode setting.
h When spot light-measuring is
selected, the light-measuring
F3.5
1/40
spot mark
appears in the
center of the monitor.
Light-measuring spot mark
English 110
ISO SENSITIVITY
With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
1
Display the NORMAL Mode Shooting Menu (page 49), select “ISO”,
and press the SET button.
=: The ISO sensitivity is set automatically (video clip recording: ISO 50
to 800; still image shooting: ISO 50 to 200).
*: Sets sensitivity to ISO 50.
u: Sets sensitivity to ISO 100.
v: Sets sensitivity to ISO 200.
w: Sets sensitivity to ISO 400.
6: Sets sensitivity to ISO 800.
-: Sets sensitivity to ISO 1600.
z: Sets sensitivity to ISO 3200 (video clip recording: ISO 1600).
*The indicated ISO value is the standard output sensitivity.
2
Select the desired icon, and press the SET button.
h This completes the ISO sensitivity setting.
111 English
HINT
i When the ISO sensitivity is set to z, video clips, as well as still images
captured during video clip recording, will be recorded at ISO -.
i By setting a higher ISO sensitivity, you can set faster shutter speeds and
capture images in darker locations, but noise in the captured images may
increase or the images may be irregular.
i By assigning an operation shortcut to the SET button (page 148), you can
change the ISO setting from the Shooting Screen.
CAUTION
Does the image appear to flicker when recording a video clip?
i If recording a video clip under fluorescent lights with the ISO sensitivity set
to w or higher, a noticeable flicker may appear in the image.
English 112
WHITE BALANCE
This camera automatically adjusts the white balance under most lighting
conditions. However, if you want to specify the lighting conditions or change
the overall tone of the image, the white balance can be manually set.
1
Display the NORMAL Mode Shooting Menu (page 49), select “WHITE
BALANCE”, and press the SET button.
>: The camera will make the white balance adjustment automatically
based on the natural and artificial light conditions.
r: For shooting outside on a sunny day.
o: For shooting outside on a cloudy day.
p: For shooting inside under fluorescent lighting.
q: For shooting inside under incandescent lighting.
^: This setting is used for a more accurate white balance using the
existing light source (one push). Please use it when the light source
cannot be identified, for example.
Setting procedure
1 Select the ^ icon.
2 Fill the entire screen with a plain white card (or piece of
paper, etc.), and press the SET button.
h This completes the white balance setting.
2
Select the desired icon, and press the SET button.
h This completes the white balance setting.
HINT
To cancel the white balance setting
i Perform step 1, select >, and then press the SET button.
113 English
EXPOSURE SETTING
The shutter speed and aperture size can be set individually by the user.
1
Display the NORMAL Mode Shooting Menu (page 49), select
“EXPOSURE”, and press the SET button.
@: The optimum shutter speed and aperture size are set according to
the brightness of the subject (aperture and shutter variable program
AE).
Example: For simple shooting with minimum setup, using the
camera’s automatic settings.
T: This allows you to set a specific shutter speed. The camera
automatically sets an appropriate aperture size based on this setting
(shutter speed priority AE).
Example: To set a fast shutter speed for capturing a clear image
of a fast-moving object, or to set a slow shutter speed to shoot
the flow of a background scene.
By using the flash in combination with a slow shutter speed, you
can create beautiful photographs of people against a
background night scene (slow synchro photography).
g: This allows you to set a specific aperture size. The camera
automatically sets an appropriate shutter speed based on this
setting (aperture priority AE).
Example: To open the aperture for portraits with a blurred
background (for a shallow field depth), or to close the aperture
for a clear foreground and background (for a deep field depth).
,: This allows you to set a specific shutter speed and aperture size
(manual exposure control).
Example: When shooting in a dark location without using the
flash, set the shutter to stay open for a longer time (slow shutter).
When used for shooting nighttime scenes, you can capture lights
flowing across the image.
English 114
EXPOSURE SETTING
2
Select the desired icon from the
exposure menu, and press the
SET button.
<If T, g or , was
selected>
1 Toggle the SET button up or
down to select aperture value
or shutter speed.
2 Toggle the SET button left or
right to change the setting for
the selected parameter.
F1.8
1/250
Shutter speed
Aperture
3
Press the SET button.
h This completes the exposure setting.
HINT
i To prevent the effects of camera shake at slow shutter speeds, it is
recommended to use a tripod or other method to stabilize the camera.
i A slow shutter speed may be useful for photographing in a darker
environment, but noise in the image may be increased.
i To minimize noise in the image, enable the noise reduction function
(page 150).
i The exposure setting automatically becomes @ if the scene select
function is active.
i In the sequential shots mode, the shutter speed is faster than 1/15 sec.
i Even if the shutter speed is set to slower than 1/59 sec., the shutter speed
during video clip recording is 1/60 sec.
i If the exposure setting is set to T, g or H, by assigning an operation
shortcut to the SET button (page 148), you can select the T, g or H
exposure setting from the Shooting Screen.
115 English
DIGITAL ZOOM SETTING
This setting allows you to specify whether or not the digital zoom is enabled
during zoom shooting.
1
Display the NORMAL Mode
Shooting Menu (page 49), select
“DIGITAL ZOOM”, and press the
SET button.
DIGITAL ZOOM
ON
OFF
Q: Digital zoom can be used.
B: Digital zoom cannot be used.
OK
2
Select the desired setting, and
press the SET button.
h This completes the digital zoom
setting.
HINT
i The digital zoom does not function in the following situation:
When the still image mode is set to J.
English 116
FACE CHASER
As you capture a still image, the face chaser detects the subject’s face, and
adjusts the brightness and focus in a way that produces a clear and bright
photo of the subject’s face.
1
2
Display the NORMAL Mode Shooting Menu (page 49), select “FACE
CHASER”, and press the SET button.
-: The face chaser function is enabled.
.: The face chaser function is not enabled.
Select the desired setting, and press the SET button.
h This completes the face chaser setting.
HINT
When the face chaser is set to ON...
i Each face in the Shooting Screen is marked with a green frame.
i Faces that are in focus are marked with a double green frame.
i If you press the [
] button halfway, the frames marking the faces that
are in focus change to orange.
If you magnify an image that was captured with the face chaser function
enabled, the magnified image will center on the face(s).
i The scene select function setting automatically changes to =.
CAUTION
i The digital zoom is disabled.
i The face chaser function does not work when zooming in or out.
i The face chaser function may not work when the subject’s face in the
monitor is relatively small or appears dark.
117 English
HIGH SENSITIVITY MODE
When you shoot in the high sensitivity mode, the captured image appears
even brighter than that specified by the ISO sensitivity and exposure
compensation settings.
1
2
Display the NORMAL Mode Shooting Menu (page 49), select “HIGH
SENSITIVITY”, and press the SET button.
1: The high sensitivity mode is activated.
2: The high sensitivity mode is not activated.
Select the desired setting, and press the SET button.
h This completes the high sensitivity mode setting.
CAUTION
Limitations of the high sensitivity mode
i If the exposure (page 114) is set to T, g or H, or if the flicker
reduction function (page 152) is set to “ON”, the high sensitivity mode
automatically changes to “OFF”.
i When the shutter speed is reduced to create a bright image, video clip
motion will appear uneven during playback.
i When shooting in a dark environment, the autofocus and auto exposure
may not function effectively.
English 118
EXPOSURE COMPENSATION
By assigning the exposure compensation operation shortcut to the SET button
(page 148), you can make the image lighter or darker when capturing images.
1
2
Assign the operation
shortcut to the SET button
(page 148).
Toggle the SET button in
the direction for which the
operation shortcut was
assigned.
h
The exposure
compensation bar
appears.
3
Toggle the SET button to
the left or right to adjust the
exposure.
h
The exposure
compensation numerical
value is shown at the left
end of the exposure
compensation bar.
The exposure
compensation can be set
to a value from –1.8 EV to
+1.8 EV.
SET button
362
00:05:08
h
h
The exposure
compensation bar is
canceled when the MENU
button or the SET button is
pressed.
Pointer
Exposure compensation bar
HINT
The exposure compensation setting is canceled in the following cases:
i
i
i
i
When the pointer is set to the center position.
When the camera is set to the playback mode.
When the standby mode or sleep mode is activated.
After the power is turned off.
119 English
PLAYBACK
NORMAL/PLAYBACK
SLIDESHOW PLAYBACK
Specify the settings for playing back files continuously in a “slideshow” format.
In a slideshow of still images, you can set the transition time, transition effects
and BGM.
1
Display the NORMAL Mode
Playback Menu (page 49), select
“SLIDESHOW”, and press the
SET button.
SLIDESHOW
MODE
TIME
ALL
1sec
MODE:
EFFECT
Specify the file type to play back.
ALL:
Play back all files.
BGM
OFF
START
OK
MOVIE:
Play back video clips and audio
files.
PHOTO:
Play back still image files.
TIME:
Adjust the transition speed (the
period that an image is displayed
before it changes to the next image).
EFFECT:
Select a transition effect as an image
changes to the next image.
BGM:
Specify the settings for playing
background music during slideshow
playback.
START:
Begin slideshow playback.
<Changing a setting>
1 Select the item you wish to change, and press the SET button.
2 Toggle the SET button up or down to change the setting.
3 Press the SET button.
English 120
SLIDESHOW PLAYBACK
2
Select “START” and press the SET button.
h Slideshow playback begins.
h To stop slideshow playback, press the SET button or MENU button.
HINT
BGM for video clips?
i When video clips are played back in a slideshow, the recorded audio track
is played back; the BGM is not played.
121 English
FILE PROTECT
Prevent accidental erasure of image and audio files.
1
2
Display the file that you want to protect from accidental erasure, and
display the NORMAL Mode Playback Menu (page 49).
Select “PROTECT” and press the
PROTECT
SET button.
h “LOCK” appears.
h If the protect mode has already
been enabled for the file, then
“UNLOCK” appears.
LOCK
EXIT
OK
3
Toggle the SET button up or
down to select “LOCK”, and
press the SET button.
h The protect mode is set for the
file.
h The protect mark B indicates
that the file is locked.
CAUTION
i Even if the protect mode is set for certain files, they will be deleted if the
card is reformatted (page 165).
HINT
To select a different image in steps 2 and 3...
i Toggle the SET button to the left or right.
To cancel the protect mode for a file...
i Display the desired file and repeat steps 1 to 3. The protect mark B will
disappear and the protect mode is canceled.
English 122
PRINTING INSTRUCTIONS
In addition to using your printer to print out still images captured with your
camera, as with conventional film, you can have prints made at shops offering
digital print services. Moreover, this camera is DPOF-compatible, so you can
use the camera to specify the number of prints, whether or not the date is
displayed on the print, and also to request an index print.
Display the Printing Instructions Screen
1
Display the NORMAL Mode
Playback Menu (page 49), select
“PRINT INSTRUCTIONS”, and
press the SET button.
ALL IMAGES:
The specified printing instructions
apply to all the images.
EACH IMAGE:
PRINT INSTRUCTIONS
ALL IMAGES
EACH IMAGE
INDEX
ALL CLEAR
OK
The printing instructions are
specified for each individual image.
INDEX:
All the still images are printed as
miniature images (thumbnail
images), several images on one
print.
ALL CLEAR:
Clear all the printing instructions.
This cannot be selected if no printing
instructions have been specified for
the image.
123 English
HINT
Printing a single frame from a video clip
i To print with a printer or have the digital print service shop print out a still
image from a video clip, you must first save it (extract still) as a still image
(page 131).
About the DPOF format
i DPOF (Digital Print Order Format) is a print order format. You can connect
your camera to a DPOF-compatible printer to produce your prints. You can
also set the printing instructions for the desired images, and then have the
requested images printed automatically (page 184).
About the finished prints
i Rotated images (page 129) will be printed in their original orientation.
i The quality of the print output will differ depending on the print service and
printer used.
English 124
PRINTING INSTRUCTIONS
Specifying date imprinting and print quantities
You can specify printing instructions for each individual image (EACH
IMAGE), or apply the printing instructions to all the images (ALL
IMAGES).
1
2
Display the Printing Instructions Screen (page 123).
Select “ALL IMAGES” or “EACH
IMAGE”.
ALL IMAGES:
The printing instructions are applied
to all the images.
PRINT INSTRUCTIONS
ALL IMAGES
EACH IMAGE
INDEX
EACH IMAGE:
ALL CLEAR
OK
The printing instructions are applied
only to the image currently
displayed.
3
Press the SET button.
h The Date/Copies Print Screen
appears.
ALL IMAGES
----/--/--
0 copy
:
:
h If “EACH IMAGE” was selected,
toggle the SET button to the left
or right to display the desired
image to print.
h The printing instructions that are
currently active for the displayed
image are shown. You can toggle
the SET button to the left or right
to confirm the printing
COPIES 1
OK
DATE
Printing instructions
ALL IMAGES
:
:
2007/12/24
2 copies
instructions for each image.
COPIES 2
OK
DATE
<Completed printing
instructions>
125 English
4
Specify whether the date is
displayed on the print, and the
number of prints.
<Specify the number of prints>
h Toggle the SET button up or
down.
Dated prints
Quantity
h The quantity indication
changes.
h Display the desired number
of prints.
ALL IMAGES
2007/12/24
0 copy
:
:
h Press the SET button.
h The number of prints is set.
<Specify dated prints>
h From the screen on which the
number of prints is set, press the
zoom switch.
COPIES 1
OK
DATE
h Press the SET button.
5
Press the MENU button.
h The printing instructions for the requested print quantities and dated
prints are stored.
h The display returns to the Printing Instructions Screen.
HINT
If the message “Date not set for photo” appears...
i Dated prints are not possible for photos that were captured before the
camera’s date and time setting was completed.
i After the message “Date not set for photo” appears, you are returned to the
NORMAL Mode Playback Menu.
English 126
PRINTING INSTRUCTIONS
Index print
Printing out many small images on one sheet is called an “index print”.
This is convenient for use as a list of the images you have captured.
1
2
3
Display the Printing Instructions Screen (page 123).
Select “INDEX”.
Press the SET button.
INDEX PRINT
h The Index Print Screen appears.
OK:
Specify an index print copy.
EXIT:
OK
EXIT
Discontinue the setting procedure,
and return to the Printing
Instructions Screen.
OK
4
Select “OK”, and press the SET
button.
h This completes the setting for the
index print. You are returned to
the Printing Instructions Screen.
HINT
To cancel the index print setting
i Follow steps 1 and 2, select “CLEAR” in step 3, and press the SET button.
127 English
Clearing all the printing instructions
Delete the printing instructions for all images.
1
2
3
Display the Printing Instructions Screen (page 123).
Select “ALL CLEAR”.
Press the SET button.
h The Confirm All Clear Screen
ALL CLEAR
:
:
2007/12/24
appears.
CANCEL:
copies
2
Clear the printing instructions for all
images.
EXIT:
CANCEL
EXIT
Cancel the clear procedure and
return to the Printing Instructions
Screen.
OK
4
Select “CANCEL”, and press the SET
button.
h All the printing instructions are
cleared and you are returned to the
Printing Instructions Screen.
English 128
ROTATE STILL IMAGE
Captured still images can be rotated to the correct orientation for viewing.
1
2
Display the still image you wish to rotate, and display the NORMAL
Mode Playback Menu (page 49).
Select “ROTATE”, and press the
ROTATE
SET button.
RIGHT:
Rotates image clockwise
90 degrees.
LEFT:
RIGHT
LEFT
Rotates image counterclockwise
90 degrees.
OK
3
Select “RIGHT” or “LEFT”, and press the SET button.
h Each time the SET button is pressed, the image is rotated another 90
degrees.
HINT
i An image for which the protect mode has been enabled cannot be rotated.
To rotate a protected image, cancel the protect mode before beginning the
rotate image procedure (page 122).
129 English
REDUCE STILL IMAGE SIZE
(RESIZE)
A captured image can be resized to a smaller size and saved as a separate
image.
1
2
Display the still image whose size you want to change, and display
the NORMAL Mode Playback Menu (page 49).
Select “RESIZE”, and press the
SET button.
RESIZE
(2288×1712)
<For still images with a 4:3
2M (1600×1200)
0.3M (640×480)
vertical-to-horizontal aspect ratio>
2M (4:3):
The size changes to
1600 × 1200 pixels.
OK
0.3M (4:3): The size changes to
640 × 480 pixels.
<For still images with a 16:9
aspect ratio>
2M (16:9): The size changes to
1920 × 1080 pixels.
0.9M (16:9): The size changes to
1280 × 720 pixels.
3
4
Select the new image size, and press the SET button.
Select “SAVE” and press the SET button.
h Resizing begins.
HINT
Why can’t the image be resized?
i An image can be resized only to a smaller (or the same) size, not to a
larger size.
English 130
EXTRACTING ONE FRAME FROM A
VIDEO CLIP
You can select one image (scene) from a video clip, copy it, and save it as a
still image (the original file remains unchanged).
1
2
Play back a video clip, and pause at the point you wish to copy and
save.
Display the NORMAL Mode
EXTRACT STILL
Playback Menu (page 49), select
“EXTRACT STILL”, and press the
SET button.
16:9:
The currently displayed image will
be saved as a still image with an
aspect ratio of 16:9. (This selection
is available only for video clips
recorded in the HD mode.)
4:3:
16:9
4:3
OK
The currently displayed image will be
saved as a still image with an aspect
ratio of 4:3.
3
4
Select “16:9” or “4:3”, and press the SET button.
h The screen to confirm that you wish to save the image appears.
SAVE:
Save the currently displayed image as a still image.
EXIT:
You are returned to the screen to extract an image.
Select “SAVE” and press the SET button.
h The currently displayed image is saved as a still image.
131 English
EDITING VIDEO CLIPS
You can trim away unwanted portions from a video clip and save it as a new
video clip (video clip cutting [extracting]). You can also join video clips
together and save them as one separate clip (“joining”).
Procedure to cut (extract) a portion of a video clip
1
2
Specify the frames
(1, 2) where the
video clip is to be
cut.
A
B
C
J
Extract the specified portion.
[Two ways to cut the
video clip]
i Trim away portions
A and C, and save
portion B.
i Delete portion B,
and join portions A
and C.
i The original
video clip is
not affected.
(You can also choose to erase the original video clip when the new clip is
saved.)
English 132
EDITING VIDEO CLIPS
Procedure to join video clips
Specify the video clip that will come first.
J
Specify the video clip that you wish to
append (join).
J
Join the video clips.
i The video clips are joined.
i
The original video clips are not affected.
(You can also choose to erase the
original video clips when the new clip is
saved.)
CAUTION
Caution when editing video clips
i When editing video clips, do not move the REC/PLAY switch. If you move
the REC/PLAY switch while editing video clips, not only will the editing not
be properly completed, but the original video clip may also be erased.
i As the number or size of the video clips increases, the card memory may
become full, making it impossible to edit the video clips. In this case, you
will need to free some of the memory on the card, either by deleting files
that are no longer necessary (page 88), or by selecting “OVERWRITE”
when saving edited video clips (pages 136 and 138).
133 English
Video clip cutting (extracting)
Display the video clip from which you wish to extract a segment.
Display the NORMAL Mode
1
2
EDIT VIDEO
Playback Menu (page 49), select
“EDIT VIDEO”, and press the SET
button.
CUT
JOIN
OK
3
Select “CUT” and press the SET
button.
h The Cutting Screen appears.
Start point
00:00:10
CUT
Press shutter to save
English 134
EDITING VIDEO CLIPS
4
Specify the start point of the extract.
h Use the procedure below to specify the frame from which the video
clip extract will start.
h Play the video clip until approximately the desired point, pause the
video clip, then play the video clip one frame at a time, stopping at the
start point of the extract. This will be the first frame of the extract.
h If the start point of the video clip is also the start point of the extract,
proceed to step 6.
<Procedure>
Play:
After pausing playback, press and hold the SET button to the right for
about 2 seconds for forward playback, or to the left for reverse
playback.
Pause:
During playback, press the SET button.
Accelerated playback:
During playback, toggle the SET button to the left or right to change
the playback speed.
Single frame:
After pausing playback, toggle the SET button to the right to move
forward one frame, or to the left to move back one frame.
5
Toggle the SET button up.
h The start point of the video clip
Approximate playback time
extract is set, and the screen to
CUT
00:00:06
specify the end point appears.
h Specify the end point of the
extract by following the same
procedure as in step 5.
<When joining the first and latter
portions>
1 Toggle the SET button down.
h Each time the SET button is
toggled down, the sections to
delete and the sections to
save are reversed.
Press shutter to save
End point
Portion to be deleted
2 Specify the end point of the
extract. The frame following the
end point of the extract will be
the start point of the latter portion
to be joined.
135 English
6
Press the [O] button.
h A screen appears for you to
select either to save the edited
video clip as a new (separate)
file, or to delete the original video
clip and replace it with the edited
video clip.
CUT
SAVE AS NEW
OVERWRITE
REVIEW CLIP
SAVE AS NEW:
OK
The edited video clip will be
saved as a new file. The original
video clip remains unchanged.
OVERWRITE:
The original video clip will be
deleted. Only the edited video clip
will be saved.
REVIEW CLIP:
Play back the edited video clip
before saving it.
7
Select the desired option, and press the SET button.
h Editing starts.
h When editing ends, you are returned to the NORMAL Mode Playback
Menu.
HINT
i If the original video clip is protected, even if you select “OVERWRITE” in
step 7 and press the SET button, the original video clip will not be erased.
If you want it to be erased, you will need to first remove the protection
(page 122).
i If the “Card full” message appears, you will need to free some of the
memory by deleting files that you do not need to keep.
CAUTION
Warning concerning the battery pack remaining charge
i During the editing of lengthy video clips, the time to process the large
amount of data can become quite long. To avoid problems caused by the
battery pack becoming depleted in the middle of video clip editing, before
starting to edit be sure that a sufficiently charged battery pack is installed
in the camera, or connect the AC adaptor.
i It is recommended that a computer be used to edit long video clips.
English 136
EDITING VIDEO CLIPS
Joining video clips
CAUTION
i Video clips that were photographed in different modes cannot be joined.
1
2
Display the NORMAL Mode
Playback Menu (page 49), select
“EDIT VIDEO”, and press the SET
button.
EDIT VIDEO
CUT
JOIN
OK
Select “JOIN” and press the SET
button.
h The 6-image playback display for
video clips appears.
Select a clip
Press shutter to save
100
0010
0011
0012
0013
137 English
3
4
Move the orange frame to the
video clip you wish to join, and
press the SET button.
h The specified video clip is
labeled with a number.
h Up to 9 video clips can be
selected.
h To cancel a selection and
remove the number label from a
video clip, select the video clip
and press the SET button.
Select a clip
Press shutter to save
100
00:00:07
0012
0010
0011
0013
Press the [O] button.
h A screen appears for you to
select either to save the joined
video clip as a new (separate)
file, or to delete the original video
clips and replace them with the
joined video clip.
JOIN
SAVE AS NEW
OVERWRITE
REVIEW CLIP
SAVE AS NEW:
OK
The joined video clip will be saved
as a new file. The original video
clips remain unchanged.
OVERWRITE:
The original video clips will be
deleted. Only the joined video clip
will be saved.
REVIEW CLIP:
Play back the joined video clip
before saving it.
English 138
EDITING VIDEO CLIPS
5
Select the desired option, and press the SET button.
h Editing starts.
h When editing ends, you are returned to the Playback Setting Screen.
HINT
i If the original video clip is protected, even if you select “OVERWRITE” in
step 5 and press the SET button, the original video clip will not be erased.
If you want it to be erased, you will need to first remove the protection
(page 122).
i If the “Card full” message appears, you will need to free some of the
memory by deleting files that you do not need to keep.
CAUTION
Warning concerning the battery pack remaining charge
i During the editing of lengthy video clips, the time to process the large
amount of data can become quite long. To avoid problems caused by the
battery pack becoming depleted in the middle of video clip editing, before
starting to edit be sure that a sufficiently charged battery pack is installed
in the camera, or connect the AC adaptor.
i It is recommended that a computer be used to edit long video clips.
139 English
DISPLAYING FILE PROPERTIES
(INFORMATION SCREEN)
On the Information Screen you can check what the settings were when a file
was recorded with your camera.
1
2
Display the desired file on
the camera monitor.
INFO
2
3
4
5
100-0001
HD-SHQ
1
;
1280×720 30fps SHQ
AVC/H.264
11.9MB
00:00:03
Press the MENU button for
at least 1 second.
h The Information Screen
appears.
h If the MENU button is
pressed again, the
Information Screen is
canceled.
1 Video clip mode settings
2 Image or sound number
3 Protect setting
4 File size
5 Shooting or recording
time
6 Exposure compensation
setting
7 Aperture value
8 Shutter speed
9 Remaining battery
charge
0 Date and time of image
A Still image resolution
settings
6
9
0.3
2007.12.25 19:30
<Video clip file>
INFO
2
3
4
7
8
6
B
9
100-0002
987KB
A
;
1600×1200
F6.8
1/1000
0.3
ISO 50
2007.12.25 19:30
<Still image file>
2
3
4
5
INFO
100-0003
987KB
00:00:03
AAC
B ISO sensitivity setting
9
;
2007.12.25 19:30
<Audio file>
English 140
OPTION SETTINGS
OPTION SETTINGS
DISPLAY THE OPTION SETTING
MENU
The camera settings are executed via the Option Setting Menu.
1
Turn on the camera, and press
the MENU button.
RECORDING MENU1
MOVIE
1
2
3
1
2
3
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
Option tab
2
Select an Option tab (1, 2 or 3),
and press the SET button.
h The Option Setting Menu
appears.
OPTION MENU1
CLOCK SET
1
2
3
1
2
3
INFO DISPLAY
STARTUP DISPLAY
OPERATION BEEP
POST VIEW
REC FOLDER
To access a Setting Screen
3
Toggle the SET button up or
down to select the item you wish
to set, and press the SET button.
h The Setting Screen for the
selected item appears.
INFO DISPLAY
SHOW ALL
DATE & TIME
COUNTER
OFF
h To return to the Menu Screen,
press the MENU button.
OK
141 English
SCREEN DISPLAY
Specify what information is displayed on the Playback Screen.
1
2
Display the Option Setting Menu (page 141).
Select “INFO DISPLAY”, and
press the SET button.
SHOW ALL:
INFO DISPLAY
SHOW ALL
DATE & TIME
COUNTER
OFF
Display the capture date and
playback time (for video clips).
DATE & TIME:
Display the capture-date.
COUNTER:
OK
Display the video clip playback
time.
OFF:
Do not display the capture date and
playback time.
3
Select the desired setting, and press the SET button.
h This completes the screen display setting.
English 142
SELECT THE STARTUP DISPLAY
The startup display is the display that appears on the monitor when the
camera is turned on in the recording mode.
1
2
Display the Option Setting Menu (page 141).
Select “STARTUP DISPLAY”, and
press the SET button.
DATE & TIME:
STARTUP DISPLAY
DATE & TIME
Xacti
The camera’s date and time setting
is shown.
OFF
Xacti:
The Xacti logo is shown.
OFF:
OK
No startup display.
3
Select the desired setting, and press the SET button.
h The selected startup display is set.
143 English
OPERATION SOUNDS
Use this menu to set the confirming audio signals when the camera is turned
on/off or when the operation buttons ([
] button, SET button, MENU
button, etc.) are pressed, to adjust the operation sound volume, and to
enable/disable the audio guide.
1
2
Display the Option Setting Menu (page 141).
Select “OPERATION BEEP”, and
OPERATION BEEP
press the SET button.
h If “ALL OFF” is selected and the
SET button pressed, all the
operation sounds are muted.
h If the MENU button is pressed,
you are returned to the Option
Screen.
TURN ON/OFF
SHUTTER
ON
D
KEY SW
A
AUDIO GUIDE
OPERATION VOL
ALL OFF
ON
4
OK
TURN ON/OFF:
Mute or enable the sound that is
produced when the power is turned
on or off.
SHUTTER:
Select the sound that is produced
when the [
] button is pressed, or
when a photo is taken using the self-
timer.
KEY SW:
Select the sound that is produced
when the SET button, MENU button,
etc. are pressed.
AUDIO GUIDE:
Mute or enable the camera’s audio
help guide.
OPERATION VOL:
Adjust the volume of the operation
sounds.
English 144
OPERATION SOUNDS
3
Toggle the SET button up or down to select the desired setting, and
press the SET button.
h The screen to select operation sounds appears.
<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>
h The respective screen to enable or disable the sound appears.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
ON: Activates the sound.
OFF: Deactivates the sound.
<If “SHUTTER” or “KEY SW” is selected>
h The screen to select the operation sounds appears.
h Select from 8 different sounds (A to H).
h You can toggle the SET button right to preview the selected
operation sound.
h If “OFF” is selected, no sound is produced.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
<If “OPERATION VOL” was selected>
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to
7 (maximum).
h Toggle the SET button up or down to select the volume, and press
the SET button.
4
Press the MENU button.
h The operation sound settings are completed.
HINT
i If you keep the MENU button pressed and turn on the power, the screen to
turn the operation sounds ON/OFF appears at once. You may find this a
convenient procedure to disable the operation sounds in places you do not
want them to be audible.
145 English
POST-VIEW DISPLAY SETTING
Specify the duration that the captured image appears on the monitor (post-
view) after the [
] button is pressed.
1
2
Display the Option Setting Menu (page 141).
Select “POST VIEW”, and press
the SET button.
1 sec:
POST VIEW
1 sec
2 sec
OFF
The post-view image is displayed
for 1 second.
2 sec:
The post-view image is displayed
for 2 seconds.
OK
OFF:
The post-view image is not
displayed.
3
Select the desired setting, and press the SET button.
h This completes the post-view setting.
English 146
SPECIFY A FOLDER TO SAVE
FILES
Create or select a recording folder (a folder in which to store recorded files).
1
2
Display the Option Setting Menu (page 141).
Select “REC FOLDER”, and press
REC FOLDER
the SET button.
<Create a new folder>
h Select “NEW”.
<Select an existing folder>
NEW
100
h Select the desired folder number.
OK
3
Press the SET button.
h This completes the create/select folder setting.
h If you created a new folder, it automatically becomes the selected
recording folder.
CAUTION
When an existing folder cannot be selected or a new one created...
i A folder cannot be selected if it was created using a different device, or if it
already contains the maximum number of files.
147 English
ASSIGN SET BUTTON FUNCTIONS
Assign functions (operation shortcuts) to the SET button when it is toggled
up, down, left or right when the Shooting Screen is displayed.
1
2
Display the Option Setting Menu (page 141).
Select “SHORTCUTS”, and
SHORTCUTS
press the SET button.
: Assign the function when the
SET button is toggled up.
: Assign the function when the
SET button is toggled down.
: Assign the function when the
SET button is toggled to the
left.
OFF
OFF
OFF
OFF
RECOMMENDED SETTINGS
OK
SET button operations
: Assign the function when the
SET button is toggled to the
right.
RECOMMENDED SETTINGS:
The most commonly used
settings are automatically
assigned.
3
Select the SET button operation to which you wish to assign the
function, and press the SET button.
h The screen to assign a function to the key appears.
OFF: No operation shortcut is assigned to the key.
p AF LOCK: Lock the focus (page 76).
+ FOCUS: Set the focus range (pages 72 and 107). (This operation
shortcut can be assigned only to the
or
key.)
m FLASH: Set the flash operation (pages 77 and 102).
) EXP COMPENSATION: Adjust the exposure (page 119).
s ISO:
Set the ISO sensitivity (page 111).
O SELF-TIMER: Set the self-timer (page 103).
H EXPOSURE: Set the exposure value for the exposure setting
(page 114).
English 148
ASSIGN SET BUTTON FUNCTIONS
4
Toggle the SET button up or
down.
h Display the function you wish to
assign to the key.
SHORTCUTS
AF LOCK
OK
5
Press the SET button.
h The selected function is
assigned to the key, and you are
returned to the Shortcuts
Screen.
h To assign functions to the other
keys, repeat steps 3 through 5.
SHORTCUTS
AF LOCK
FOCUS
FLASH
EXP COMPENSATION
RECOMMENDED SETTINGS
OK
<When “RECOMMENDED
SETTINGS” is selected>
6
Press the MENU button.
h The screen to confirm the
shortcut settings appears, and
then you are returned to the
Option Setting Menu.
SHORTCUTS
h This completes the shortcuts
setting.
<To confirm the assigned
shortcuts>
h On the screen in step 2, press
the MENU button, and the
screen to confirm the shortcut
settings appears.
149 English
NOISE-REDUCTION FUNCTION
Image noise when recording video clips or still images, as well as audio noise
such as from the wind, can be minimized with the noise-reduction function.
1
2
Display the Option Setting Menu (page 141).
Select “NOISE REDUCTION”, and
NOISE REDUCTION
press the SET button.
MOVIE NR:
Set ON/OFF the function to reduce
image noise when recording a
video clip.
MOVIE NR
PHOTO NR
OFF
OFF
OFF
WIND SOUND NR
PHOTO NR:
Turn ON/OFF the image noise
reduction function during still image
shooting.
OK
WIND SOUND NR:
Turn ON/OFF the wind noise reduction function during video clip/audio
recording.
3
4
Select the desired function and press the SET button.
h The screen to select ON or OFF appears.
ON:
Noise is reduced.
OFF:
Noise is not reduced.
Toggle the SET button up or down to select the desired setting, and
press the SET button.
h This completes the noise reduction setting.
HINT
i The wind sound NR setting should normally be set to OFF when it is not
necessary. If it is used when recording a video clip or audio file in an
environment where there is no noise, the recording will sound unnatural.
i The still image NR function is effective when the shutter speed is
1/4 second or less.
i Compared to normal shooting, when the still image NR function is enabled,
the image processing time after shooting a still image is slightly longer.
English 150
ADJUST THE IMAGE QUALITY
The camera can adjust the image quality as the image is captured.
1
2
Display the Option Setting Menu (page 141).
Select “IMAGE SETTINGS”, and
press the SET button.
NORMAL:
Shoot with image quality at normal.
VIVID:
IMAGE SETTINGS
NORMAL
VIVID
SOFT
VIVID
Color saturation is increased.
SOFT:
SOFT
The sharpness is subdued for a
softer image.
OK
SOFT VIVID:
The sharpness is softened and
color saturation is increased.
3
Select the desired setting, and press the SET button.
h This completes the image quality setting.
151 English
FLICKER-REDUCTION
The flicker-reduction setting reduces the flicker that results when filming video
clips under fluorescent lights and the like where the background lighting
pulsates at the frequency of the power supply.
1
2
Display the Option Setting Menu (page 141).
Select “FLICKER REDUCT”, and
FLICKER REDUCT
press the SET button.
ON:
ON
OFF
Turns on the flicker-reduction
setting.
OFF:
Turns off the flicker-reduction
setting.
OK
3
Select the desired setting, and
press the SET button.
h This completes the flicker-reduction
setting.
HINT
i If the flicker-reduction setting is used outdoors on a very bright day, a
halation effect, which produces diffused rings of light around bright light
areas, may occur.
i The exposure setting and flicker reduction function cannot both be enabled
at the same time.
i When the flicker-reduction function is set to “ON”, the shutter speed during
video clip recording becomes 1/100 sec.
English 152
MONITOR BRIGHTNESS
Adjust the brightness of the camera’s monitor display. Use this adjustment
when the monitor image is difficult to view because of ambient lighting.
1
2
Display the Option Setting Menu (page 141).
Select “BRIGHTNESS”, and
BRIGHTNESS
press the SET button.
3
Toggle the SET button to the left
or right to set the brightness, and
press the SET button.
h The monitor brightness is set.
ADJUST
HINT
i The display in step 2 can also be accessed from the Shooting Screen.
Press the MENU button for at least 1 second; the brightness control
display will appear, and you can then adjust the monitor brightness.
153 English
ADJUST THE VOLUME OF AN
EXTERNAL MICROPHONE
The input level of a microphone connected to the camera can be adjusted.
1
2
Display the Option Setting Menu (page 141).
Select “EXT MIC VOLUME”, and
EXT MIC VOLUME
press the SET button.
3
Toggle the SET button to the left
or right to adjust the input level,
and press the SET button.
h This completes the input level
setting for the external
3
VOLUME SETTING
microphone.
English 154
SCREEN LANGUAGE
You can set the monitor of your camera to display the messages in any one of
several languages.
1
2
Display the Option Setting Menu (page 141).
Select “LANGUAGE”, and press
LANGUAGE
the SET button.
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
:
Japanese
English
French
German
Spanish
Italian
ENGLISH:
FRANCAIS:
DEUTSCH:
ESPAÑOL:
ITALIANO:
OK
NEDERLANDS: Dutch
:
Russian
PORTUGUÊS: Portuguese
TÜRKÇE:
Turkish
Korean
Chinese (simplified)
Chinese (traditional)
:
:
:
3
Select the desired language, and press the SET button.
h The selected display language is set.
155 English
TV OUTPUT SETTING
Specify the type of image signal that is output from your camera’s USB/AV
terminal, COMPONENT/AV terminal or HDMI terminal.
1
2
Display the Option Setting Menu (page 141).
Select “TV OUTPUT”, and press
TV OUTPUT
the SET button.
TV SYSTEM:
TV SYSTEM
TV TYPE
NTSC
4:3
Set the type of TV signal that is
output from the COMPONENT/AV
terminal.
COMPONENT/HDMI
720p
TV TYPE:
Set the TV’s aspect ratio.
COMPONENT/HDMI:
Set the signal that is output from
the COMPONENT/AV and/or HDMI
terminal.
OK
English 156
TV OUTPUT SETTING
3
Select the desired setting, and press the SET button.
h The screen to change the parameter for the selected setting appears.
<If “TV SYSTEM” is selected>
NTSC: Outputs NTSC video signals.
PAL: Outputs PAL video signals.
<If “TV TYPE” is selected>
4:3: Use this setting when a TV having an aspect ratio of 4:3 is
connected.
16:9: Use this setting when a TV having an aspect ratio of 16:9 is
connected.
<If “COMPONENT/HDMI” is selected>
1080i: The output signal is set to1080i.
720p: The output signal is set to 720p.
480p: The output signal is set to 480p.
4
5
6
Toggle the SET button up or down to select the desired parameter.
Press the SET button.
Press the MENU button.
h This completes the TV output setting.
157 English
k Relation between “TV TYPE” setting and TV display
The tables below show the video signal that is output when the “TV TYPE”
setting is changed. However, note that for some TVs that have an auto-detect
function, the output may not conform to the table, or the TV display may not
change at all.
“TVTYPE” TV type to be
setting connected
Image file to be
displayed
TV display
Still image
(4:3)
Video clip in SD
mode
4:3
4:3
Video clip in HD
mode
English 158
TV OUTPUT SETTING
“TVTYPE” TV type to be
Image file to be
displayed
TV display
setting
connected
Still image
(4:3)
Video clip in SD
mode
16:9
16:9
Video clip in HD
mode
* The still image examples are for images captured in a 16:9 still image mode.
CAUTION
If the TV display is not correct…
i If the appearance of the image on the TV monitor is not correct, you can
either change the camera’s “TV TYPE” setting, or change the screen size
setting on your TV. To change the screen size setting on your TV, please
refer to the instruction manual for your TV.
The aspect ratio of the output still image does not change to 16:9?
i The still image output will be 4:3 for images captured in a 16:9 still image
mode.
159 English
POWER SAVE FUNCTION
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery pack power when the camera is not being used, or to
prevent the battery pack from dying if the camera has accidentally been left
on. You can specify the elapsed time (standby time) before the power save
function is activated.
1
2
Display the Option Setting Menu (page 141).
Select “POWER SAVE”, and
press the SET button.
BATT:REC:
POWER SAVE
BATT:REC
1 min
5 min
5 min
ON
Set the standby time for the
shooting modes when the battery
pack is used.
BATT:PLAY
AC:REC/PLAY
BLUE LIGHT
BATT:PLAY:
Set the standby time for the
playback modes when the battery
pack is used.
OK
AC:REC/PLAY:
Set the standby time for the
shooting and playback modes when
using an AC power source.
BLUE LIGHT:
Turn the ring-type blue LED
indicator encircling the [
buttons ON or OFF.
]/[
]
English 160
POWER SAVE FUNCTION
3
4
Select the desired option, and press the SET button.
h The Set Standby Time Screen appears.
Toggle the SET button up or down to set the standby time.
<If “BATT:REC”, “BATT:PLAY” or “AC:REC/PLAY” was selected in
step 3>
Up:
Increases the standby time.
Down:
Decreases the standby time.
<If “BLUE LIGHT” was selected in step 3>
ON:
The ring LED is lit.
OFF:
The ring LED is not lit.
5
6
Press the SET button.
Press the MENU button.
h The standby time is set.
161 English
FILE NO. MEMORY
If a newly formatted card is used, the file name (image number) of the
captured image automatically begins from 0001. If the card is subsequently
reformatted, or if a different reformatted card is used, the file names again
begin from 0001. This is because the file number memory function is set to
“OFF”, and consequently it results in more than one card containing images
with the same numbers. By setting the file number memory function to “ON”,
even if the card is reformatted or the card is replaced with another card, the
consecutive numbering of file names continues from the last number
recorded by the camera.
<File number memory function “OFF”>
File name (image number)
Card A
0001, 0002...... 0012, 0013
Replace card
Card B
0001, 0002...... 0012, 0013
<File number memory function “ON”>
File name (image number)
Card A
0001, 0002...... 0012, 0013
Replace card
Card B
0014, 0015........0025, 0026
English 162
FILE NO. MEMORY
i If Card B already has files in it when it replaces Card A, file names are
assigned as follows.
When the highest file number on Card B (before replacing) is lower
than the highest file number on Card A: the file name of the next
recorded image continues from last file name recorded on Card A.
Card A
0001, 0002 ..... 0012, 0013
Replace card
Card B
0001, 0002, 0014, 0015 ..... 0025, 0026
Previously recorded files
When the highest file number on Card B (before replacing) is higher
than the highest file number on Card A: the file name of the next
recorded image continues from last file name recorded on Card B.
Card A
0001, 0002 ..... 0012, 0013
Replace card
Card B
0020, 0021, 0022, 0023 ..... 0025, 0026
Previously recorded files
163 English
1
2
Display the Option Setting Menu (page 141).
Select “FILE NO. CONT’D”, and
FILE NO. CONT’D
press the SET button.
ON:
ON
OFF
The file number memory function is
on.
OFF:
The file number memory function is
off.
OK
3
Select the desired setting, and press the SET button.
h The selected file number memory function is set.
HINT
i Until the file number memory function is turned “OFF”, consecutive file
names are assigned. It is recommended that the file number memory
function be returned to “OFF” at the end of each photography session.
English 164
FORMATTING A CARD
A card must be formatted with this camera:
i After purchasing, when used for the first time, or
i If it was formatted using a personal computer or another digital camera.
The card cannot be formatted if the lock switch is set to the “LOCK” position.
Proceed with the format procedure after setting the lock switch to the
unlocked position.
1
2
Display the Option Setting Menu (page 141).
Select “FORMAT”, and press the
FORMAT
SET button.
h In normal use, a full format is not
necessary. However, in case a
card error occurs even after
normal formatting, executing a
full format may resolve the
problem.
FORMAT
FULL FORMAT
OK
FORMAT:
A normal formatting is executed.
FULL FORMAT:
The entire card is scanned and
formatted. (When there is little
battery power remaining, this setting
cannot be selected.)
3
Select the desired format option, and press the SET button.
h A confirmation screen appears.
165 English
4
Select “YES”, and press the SET button.
h Formatting begins.
h During formatting, “Formatting” and “do not power off” are shown on
the monitor.
CAUTION
Caution during formatting
i Do not turn off the power to the camera or eject the card during formatting.
Formatting erases the data
i When a card is formatted, all data recorded on the card is erased.
Protected data (page 122) is also erased, so before formatting a card, any
data you want to keep should be copied to your personal computer’s hard
disk or other storage medium.
Caution regarding disposing/transferring the card (recovering data from
a reformatted card)
i If a card is reformatted or the data is erased from the card using the
camera or a computer, the card’s control data may be merely modified and
the data itself may not be completely erased from the card.
i In some cases it may be possible to recover the data from a reformatted
card using special software for that purpose. However, if the camera is
used to execute a full format, it will be impossible to recover the data even
by the use of data recovery software.
i If you are disposing of a card, it is recommended that you physically
destroy it. If you are transferring the card to someone else to use, it is
recommended that you use the camera’s full format function to reformat
the card, or use commercially available software for erasing card data.
Managing data is the responsibility of the user.
HINT
To cancel formatting
i In step 4, select “NO”, and press the SET button.
English 166
RESETTING THE CAMERA SETTINGS
Reset the camera to the factory-preset settings.
1
2
Display the Option Setting Menu (page 141).
Select “RESET SETTINGS”, and
press the SET button.
RESET:
RESET SETTINGS
RESET
EXIT
Reset to the factory-preset settings.
EXIT:
Do not change the settings, and
return to the Option Setting Menu.
OK
3
Select “RESET”, and press the
SET button.
h The camera settings are reset to
the factory-preset settings.
HINT
i Note that the following settings do not change with this procedure:
Date and time setting
Language setting
TV system setting
167 English
CHECKING THE REMAINING CARD
MEMORY
You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see “Possible No. of
Images/Possible Shooting Time/Possible Recording Time” on page 216.
Checking the remaining number of images and
video recording time
1
Set the REC/PLAY switch to REC,
and turn on the camera.
h The remaining number of images
appears in the upper left of the
monitor.
Remaining number of images
Remaining video
recording time
h The remaining video recording
time appears in the upper right of
the monitor.
362
00:05:08
h The remaining number of images
and video recording time will
differ depending on the resolution
and compression settings.
F1.8
1/14
For audio recordings
1
Set the camera to the audio
recording mode (page 96).
h The remaining audio recording
time is shown.
Remaining time
368
07:47:54
F1.8
1/34
English 168
CHECKING THE REMAINING CARD MEMORY
HINT
i When the remaining number of images or the remaining video recording
time is “0”, you cannot capture any more images. To capture more images,
either install a new card, or save the images to a computer and then delete
them (page 88) from the card.
i When the remaining number of images or the remaining video recording
time is “0”, it may be possible to capture a few more images by setting a
lower resolution setting (pages 71, 93 and 94), or selecting a different
image quality setting.
169 English
CHECKING THE REMAINING
BATTERY PACK CHARGE
When using the battery pack, the remaining battery pack charge can be
checked on the monitor. Make sure to check this indicator before capturing an
image. For an indication of the possible length of time for battery pack
operation, see page 215.
1
Display the Shooting Menu or
Playback Menu (page 49).
h The battery pack remaining
charge indicator appears in the
lower right corner of the monitor.
h Due to the battery pack
characteristics, when the
ambient temperature is low,
may appear early for an
RECORDING MENU1
MOVIE
1
2
3
1
2
3
PHOTO
SCENE SELECT
FILTER
FLASH
SELF-TIMER
incorrect indication of the
remaining charge.
Battery pack remaining
charge indicator
Also, depending on the
conditions of use of the camera
or the ambient conditions
(temperature, etc.), the indicated
remaining charge may change.
Therefore, this indication can only
be used as a general
approximation of the remaining
charge.
Battery pack
remaining
Battery remaining charge
charge indicator
No indication, or
Approx. full.
Power is low.
It will soon be impossible to capture or play
back images.
If this icon flashes when the [
] button is pressed, images cannot be
captured. Recharge the battery pack.
] button or
[
English 170
CHECKING THE REMAINING BATTERY PACK
CHARGE
HINT
i If any file is present, you can also check the remaining battery pack charge
on the Information Screen (page 140).
i Battery life may differ even among battery packs of the same type.
i Depending on the usage of the camera (such as the number of times the
flash is used, the use of the monitor, etc.) or the ambient temperature
(temperatures below 10 °C [50°F]) the number of images that can be
saved on a fully charged battery pack will vary greatly.
i It is recommended that you prepare an extra battery pack(s) when taking
pictures at a wedding or while traveling, for example, so you don’t miss
capturing images of important moments due to the battery pack power
running out. The same is recommended for taking photos in cold
environments. (In a ski area, for example, the battery pack can be kept
warm in your pocket until ready to use.)
171 English
OTHER DEVICES AND CONNECTIONS
CONNECTING TO A TV
CONNECTING TO A TV
CONNECTING TO A STANDARD
VIDEO INPUT TERMINAL
About image output: The image output destination differs depending on the
connection cable.
Recording mode
Connection
cable
Image output
destination
Playback
mode
Standby
Recording
NTSC:
n
Camera monitor
TV
m
n
m
PAL: m
Dedicated S-AV
interface cable
NTSC: m
n
PAL: n
Dedicated
component
cable
Camera monitor
TV
n
m
n
n
m
m
Camera monitor
TV
n
m
m
n
n
m
HDMI cable
m: Images are output n: Images are not output
Dedicated S-AV interface cable
Yellow plug:
To Video Input terminal
To AC adaptor
COMPONENT/AV terminal
Set the input to
“VIDEO”.
i Insert the plug with the
[n] mark facing up.
Not connected*
White plug: To Audio Input (L) terminal
Red plug: To Audio Input (R) terminal
* When connected, the images are not produced normally on the TV monitor.
English 172
ENJOY HIGHER IMAGE QUALITY
Connect to the S-VIDEO terminal
<When connecting to an S-VIDEO input terminal>
Dedicated S-AV
interface cable
Yellow plug:
Not connected*
To AC adaptor
COMPONENT/AV terminal
Set the input to
“VIDEO”.
i Insert the plug with the
[n] mark facing up.
S-terminal
White plug: To Audio Input (L) terminal
Red plug: To Audio Input (R) terminal
* When connected, the images are not produced normally on the TV
monitor.
173 English
Connect to the 480p/720p/1080i terminal
If your TV has a 480p/720p/1080i input terminal, you can enjoy the high video
quality of component output from your camera.
Dedicated component cable
White plug:
To Audio Input (L) terminal
Red plug:
To Audio Input (R) terminal
To AC
adaptor
COMPONENT/AV terminal
Set the input to
“VIDEO”.
i Insert the plug with the
[n] mark facing up.
To 480p/720p/1080i
input terminal
NOTE
If your TV does not have 480p/720p/1080i video input capability
i The images will not appear on the TV.
Camera Menu Screen and TV Menu Screen
i The Menu Screen appears only on the TV monitor, so please operate the
camera while looking at the TV monitor.
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
English 174
ENJOY HIGHER IMAGE QUALITY
Connecting to the HDMI terminal
HDMI cable
(recommended accessory)
To AC
adaptor
HDMI terminal
Set the input to
“HDMI”.
To HDMI terminal
To reduce spurious radiation
i Please affix the cores (included)
<Docking station end>
<TV end>
Core (large)
Core (small)
HINT
i HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
175 English
PLAYING BACK ON A TV
i After connecting the camera to the television, switch the TV input to the
terminal to which the camera is connected.
i When the camera is connected to a TV, no image appears on the camera’s
monitor.
i The playback method is the same as when viewing images on the
camera’s monitor.
Audio playback: see page 97
i The remote control unit can be used for playback (page 82).
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
i If the camera set in the docking station is in the sleep mode, press the
operation mode button on the docking station, or the ON/OFF button on
the remote control unit, to turn the camera on.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
HINT
About the display when the “PAL” TV system is selected (page 156) and
the supplied S-AV interface cable is used to connect the camera to the
TV
During recording: The image appears on the monitor only; it does not appear
on the TV.
During playback: The image appears on the TV only; it does not appear on
the monitor.
English 176
Xacti Library
The Xacti Library feature allows you to save files recorded with your camera
to a large-capacity hard disk without using a computer and play them back on
your TV. No computer operation is involved. You can view full high-definition
images right on your TV screen.
In addition, you have access to file operations such as copy and delete, as
well as file management using the calendar.
For detailed information about using Xacti Library, please see the separate
Xacti Library Instruction Manual.
177 English
CONNECTING TO A PRINTER
CONNECTING TO A PRINTER
PictBridge MODE
Your camera supports the PictBridge function. By connecting the camera
directly to a PictBridge-enabled printer, the camera’s monitor can be used to
select images and initiate printing (PictBridge printing).
1
2
Install the card in the camera, open the monitor unit to turn on the
camera, and turn on the printer.
Use the supplied docking station to connect the camera to the
printer.
To AC adaptor
USB terminal
USB CONNECTION
To USB connector
COMPUTER
PRINTER
CANCEL
Dedicated USB interface cable
i Insert the plug with the [n] mark facing
up.
CANCEL
OK
English 178
PictBridge MODE
3
4
Select “PRINTER”, and press the SET button.
The PictBridge printing mode is
activated.
h The camera switches to the
PictBridge printing mode, and
the Printing Mode Screen
appears.
PictBridge MENU
PRINT 1 IMAGE
PRINT ALL IMAGES
INDEX
DPOF
PRINTER SETTINGS
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
Caution when connecting a printer
i If the power to the printer is turned off while it is connected, the camera
may not operate correctly. If the camera does not operate correctly,
disconnect the USB interface cable, turn off the camera, and then
reconnect the cable.
i During PictBridge printing, the camera’s button operation response is
slower.
i If the camera is powered by the battery pack for printing, make sure that
the remaining battery charge is sufficient.
179 English
PRINTING
Printing selected images
Procedure to select one still image and print it.
1
2
Complete the printing setup (page 178).
Select the one image icon Y,
and press the SET button.
h The screen to select images for
printing appears.
PRINT 1 IMAGE 100-0022
:1copy
PRINT
EXIT
3
Toggle the SET button to the left
or right to display the image you
wish to print.
OK
h Specify the image to print.
English 180
PRINTING
4
Specify the number of prints.
PRINT 1 IMAGE 100-0022
:1copy
1 Toggle the SET button up to
select “COPIES”, and press the
SET button.
2 Toggle the SET button up or
down to specify the number of
prints.
PRINT
EXIT
3 Press the SET button.
COPIES
h “PRINT” is selected.
5
Press the SET button.
h Printing begins.
HINT
To cancel printing
1 During printing, toggle the SET button down.
h The Confirm Cancel Printing Screen appears.
2 Select “CANCEL”, and press the SET button.
h If “EXIT” is selected and the SET button is pressed, printing resumes.
181 English
Printing all images
Print all of the images on the card.
1
2
Complete the print preparations (page 178).
Select the all images icon u,
PRINT ALL IMAGES 100-0022
and press the SET button.
h The Print All Images Screen
appears.
PRINT
EXIT
3
Select “PRINT”, and press the
SET button.
h Printing begins.
OK
CAUTION
Printing is not possible if there are more than 999 still images in the
card
i Delete unwanted images before printing.
English 182
PRINTING
Making an index print
Make an index print of all the images on the card.
1
2
Complete the print preparations (page 178).
Select the index print icon [,
INDEX
100-0022
and press the SET button.
h The Index Print Screen appears.
PRINT
EXIT
3
Select “PRINT”, and press the
SET button.
h Printing begins.
OK
183 English
Printing images according to printing
instructions (requested images)
Procedure to print all the ordered images.
1
2
Complete the print preparations (page 123), and complete the print
preparations (page 178).
Select the DPOF icon w, and
DPOF
:2007/12/24
:3copies
100-0022
press the SET button.
h The Print Requested Images
Screen appears.
PRINT
EXIT
3
Select “PRINT”, and press the
SET button.
h Printing begins.
OK
h Printing begins about 1 minute
after the SET button is pressed.
HINT
i In step 2, if you toggle the SET button to the left or right, you can view each
image and confirm its printing instructions.
CAUTION
i Requested images printing w is not possible if a printer is used that does
not support your camera’s DPOF function.
English 184
PRINTING
Changing the printer settings
Images are printed according to settings specified by the camera, such as
paper type, size, layout, printing quality, etc.
1
2
Complete the print preparations (page 178).
Select the printer settings icon
PRINTER SETTINGS
v, and press the SET button.
h The Printer Settings Screen
appears.
MEDIA TYPE
PAPER SIZE
LAYOUT
PRINTER VALUES
PRINTER VALUES
PRINTER VALUES
PRINTER VALUES
PRINTER VALUES
MEDIA TYPE:
QUALITY
Specify the type of paper used for
printing.
DATE STAMP
PAPER SIZE:
OK
Specify the size of paper used for
printing.
LAYOUT:
Specify how the images are to be
arranged on the paper.
QUALITY:
Select the print quality for the
images.
DATE STAMP:
Print the date the photo was taken.
185 English
3
Adjust the printer settings.
1 Toggle the SET button up or
down to select a printer
setting parameter, and press
the SET button.
PRINTER SETTINGS
MEDIA TYPE
PRINTER VALUES
h The screen to set the
selected parameter appears.
2 Toggle the SET button up or
down to adjust the setting,
and press the SET button.
h The selected parameter is
set, and you are returned to
the Printer Settings Screen.
h Follow the same procedure
to adjust the other
OK
<When “MEDIA TYPE” is
selected>
parameters, as desired.
h The contents of the settings
that can be made for each
parameter will differ
depending on the printer.
<When “PRINTER VALUES” is
selected>
h The images will be printed
according to the settings specified
on the printer side.
4
Press the MENU button.
h You are returned to the Printing Mode Screen.
HINT
i The printer setting parameters will differ depending on the printer that is
connected.
i To use printer functions which do not appear on your camera’s Printer
Settings Screen, select “PRINTER VALUES”.
i If a function set by the camera is not available in the printer, the camera’s
printer settings will automatically change to “PRINTER VALUES”.
English 186
OTHER CONNECTIONS
OTHER CONNECTIONS
CONNECTING A MICROPHONE/
HEADPHONES
A commercially sold stereo microphone as well as headphones can be
connected to the camera.
To reduce spurious
radiation
i Please affix a small core
(supplied) to the cable.
MIC terminal
Supplied microphone
connection cable
Connect headphones here
Stereo microphone
HINT
i The input level of the connected microphone can be adjusted (page 154).
i When an external microphone is connected, the camera’s stereo
microphone is disabled.
i When headphones are connected, the internal speaker output is turned
OFF.
i It is recommended that you do not use headphones while driving an
automobile or motorbike, while riding a bicycle or while walking.
187 English
SHOE MOUNT
Various devices—such as an external microphone, an auxiliary flash unit, a
video light, etc.—can be attached to the shoe mount on top of the camera.
Use the shoe mount for superior image quality when shooting.
HINT
About connectable devices
i Only a slave flash unit can be used with the shoe mount.
i Note that the shoe mount on this camera is not a hot shoe.
i The shoe mount may not accommodate some devices, such as some
large-size flash units or video lights.
CAUTION
i Take care not to apply undue force when attaching a device to the
camera’s shoe mount, as doing so may damage the shoe mount or the
adaptor on the device.
English 188
APPENDICES
APPENDICES
COMMONLY ASKED QUESTIONS
If you have a question about the camera operation, you might find the answer
in this compilation of commonly asked questions.
Question
Answer
Action
Why doesn’t the
power turn on?
Due to cold
temperatures, the your pocket to warm
battery pack
temporarily lost its
power.
Place the camera in
it up before using it.
Why is the battery The ambient
Keep the battery
pack in an
environment of 10 to
40 °C (50 to 104°F).
pack consumed
so quickly even
after it was fully
recharged?
temperature is
very low.
Power
Why doesn’t
recharging end?
The battery pack
life has expired.
Replace with a new
battery pack. If this
is not effective,
consult your dealer.
Why does the
The remaining
battery pack
power is low.
Use the supplied AC
adaptor, or replace
the battery pack with
a fully charged one.
icon
appear?
Why does the
multi-indicator
flash red?
A recorded file is
being saved on
the card.
Not a malfunction.
Wait until the multi-
indicator turns off.
Why doesn’t the
flash operate?
The camera has
determined that
the image is bright the camera will
Not a malfunction.
Capture the image;
Shooting
enough and the
flash is not
determine when the
flash is necessary.
necessary.
189 English
Question
Answer
Action
Are the settings
retained even
after the camera
is turned off?
—
All settings except
the self-timer and
the exposure
compensation are
retained even after
the camera is turned
off.
Which resolution
setting should I
use?
—
Select the resolution
setting according to
the intended use:
J, M, L:
Appropriate for
printing letter-size or
larger, and for
Shooting
printing a close-up
of part of a photo
(trimming).
*, +, G, P:
For printing
standard photo
(photo service)
sizes.
,, [: For
photos displayed on
a web page, or sent
as e-mail
attachments.
English 190
COMMONLY ASKED QUESTIONS
Question
What is the
difference
Answer
—
Action
Because shooting
with the optical
between the
digital zoom and
the optical zoom?
zoom uses the
optics of a physical
lens, you can shoot
without losing
minute details in the
image. The digital
zoom, on the other
hand, works by
magnifying a portion
of the image that
hits the image
sensor and may
produce a coarser
image.
Shooting
How can I get the
distant view into
focus?
—
Set the scene select
function to the
landscape +
mode when
photographing.
Or, set the focus
range setting to
manual focus -,
and set the distance
to ∞.
Set the flicker-
reduction setting to
off.
The video clip I
shot outdoors is
completely white.
—
191 English
Question
Answer
Action
When used in
cold weather, why the monitor
does the image
seem to leave
traces as it
Condition due to
Not a malfunction.
Spots that appear in
the monitor only
appear in the
monitor and will not
be recorded with the
images.
characteristics.
moves?
Monitor
Why does the
displayed image
contain some red,
blue and green
dots, or why are
black spots
visible?
Why is the image The subject was
too bright? too bright.
When capturing an
image, devise a way
to compensate for a
bright subject, for
example, by
changing the
shooting angle.
Why is the image The focus is not
Hold the camera
correctly and slowly
out of focus?
locked properly.
Viewing
images
press the [
button halfway to
lock the focus. Then
]
press the [
]
button all the way to
capture the image.
Why is a part of
the image
missing?
The image was
captured at close
range.
When capturing an
image at close
range, compose the
image using the
monitor.
English 192
COMMONLY ASKED QUESTIONS
Question
Answer
This may happen Play back images
when trying to that were recorded
play back images on a card using this
Action
Why is there no
image (z is
shown)?
stored on a card
from a different
digital camera.
camera.
Why isn’t the
magnified image
clear?
Due to the
characteristics of
the camera,
magnified images
appear less clear.
Not a malfunction.
Viewing
images
Why isn’t the
captured image
clear?
The image was
captured using
the digital zoom.
Not a malfunction.
Can I play back
image and sound
files that I edited
using my
—
We cannot
guarantee the
accurate playback of
files that have been
edited using a
computer.
computer?
Why is there a
motor-like sound
during video clip
playback?
The sound of the
camera’s
mechanical action
was recorded.
Not a malfunction.
193 English
Question
Answer
Action
Why is there no
sound?
The volume on
the TV is set to
the minimum.
Adjust the volume
on the TV.
What is the
—
Normal video
difference among
the normal video
(composite video)
output, S-video
output and
component/HDMI
output?
(composite video)
output: Combines Y
(luminance) signal
and chrominance
signal and outputs
the combined signal.
S-video output:
Outputs the Y signal
and chrominance
signal separately.
Component/HDMI
signal: Outputs the
Y signal, B-Y signal
and R-Y signal
Connecting
to a TV
separately.
The picture quality
becomes
increasingly higher,
in order from normal
video output, to
S-video output, to
component/HDMI
output.
Can the dedicated
S-AV interface
cable and the
dedicated
component cable
be connected at
the same time
and output the
image?
—
You cannot output
the image when both
cables are
connected at the
same time. Connect
only one of the
cables.
English 194
COMMONLY ASKED QUESTIONS
Question
Why does a
message appear
during PictBridge printer.
printing?
Answer
There is a
problem with the
Action
Please refer to the
instruction manual
for your printer.
Printing
The “Cannot edit
video” message
appears.
You have
attempted to join
video clips having resolution or frame
different
Select video clips
that have the same
rate.
resolutions or
frame rates.
Why is a noise
heard from a
nearby TV or
radio during
battery
Electromagnetic
waves are emitted adaptor further away
from the AC
adaptor.
Move the AC
from the TV or radio
when recharging the
battery pack.
recharging?
Why does the
“Card full”
message appear? on the card.
There is no more
available memory files, or use a card
Delete unnecessary
Misc.
that has more
memory available.
Why does the
“Card is
protected”
The lock switch on Move the lock switch
the card is in the
to the unlocked
position.
locked (protect)
message appear? position.
Why can’t the
camera be
operated?
A temporary
Remove the AC
internal circuitry
problem may be
the cause.
adaptor and the
battery pack from
the camera, wait a
few minutes, then
reinstall the battery
pack and try again.
195 English
Question
Answer
Action
A problem such
as inability to
record or play
back occurs.
The card contains After saving your
files that were
saved using a
files to a different
medium, format the
device other than card.
this camera.
Can I use my
camera abroad?
—
When the camera is
connected to a TV,
you can switch the
camera’s video
output to NTSC or
PAL. If you have
questions about
using the AC
adaptor and power
cord abroad, please
consult with a dealer
near you for advice.
Misc
Why does the
“System error”
A problem has
occurred within
Check the following
items:
message appear? the camera or
card.
1 Remove the
card and then
install it again.
2 Remove the
battery pack and
then install it
again.
3 Install a different
card.
If “System error” still
appears after
performing the
above steps, then
take the camera to
the dealer for
service.
English 196
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
Camera
Reference
page
Problem
Cause
Action
No power.
The battery
pack is dead.
Recharge the
battery pack, or
replace with a
new battery
pack. Or
connect the AC
adaptor
(supplied).
33, 37
Power
The battery
pack has not
been inserted
correctly.
Reinsert the
battery pack,
making sure to
orient it
correctly.
The camera
turns off by
itself.
The power
save function
is operating.
Turn on the
camera again.
41
41
An image is
not captured
when the
The power is
not turned on.
If the power
save function
was activated,
turn on the
camera before
shooting.
[
[
] button or
] button is
Shooting pressed.
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
197 English
Reference
page
Problem
Cause
Action
An image is
not captured
when the
The maximum Install a new
27
number of
card.
images that
Delete the
[
[
] button or can be
] button is captured or the
images that are
not necessary.
pressed.
maximum
video clip
recording time
has been
88
reached.
The flash does The flash off
Set the flash to
automatic flash
mode or forced
flash mode.
not operate.
mode is
selected.
77, 102
—
The flash unit
is not open.
Press the m
button to open
the flash unit.
Shooting
The battery
pack is dead.
Recharge the
battery pack, or
replace with a
new battery
pack. Or
33, 37
connect the AC
adaptor
(supplied).
The digital
zoom does not is set to J.
work. The digital
The still image Set the still
image to M
or lower.
94
zoom setting is Set the digital
set to “OFF”.
zoom setting to
“ON”.
English 198
TROUBLESHOOTING
Reference
page
Problem
Cause
Action
Install a
A warning tone The battery
(beep-beep- pack is
sufficiently
beep) sounds, consumed.
and it is not
possible to
take a picture
using the self-
timer.
recharged
battery pack.
Or connect the
AC adaptor
(supplied).
33, 37
When zooming The optical
Not a
in or out, the
zoom
movement
zoom has
moved to the
maximum
malfunction.
Release the
zoom switch,
and push it
again.
81
111
—
Shooting
stops
momentarily.
magnification
position.
There is noise The ISO
in the captured sensitivity
Set the ISO
sensitivity to a
lower setting.
image.
setting is too
high.
The \ icon
The camera’s
internal
shooting is not temperature is wait for the
Discontinue
shooting, and
appears, and
possible.
high.
camera to cool
down before
using it again.
No playback
image
appears.
The REC/
PLAY switch is PLAY switch to
not set to
Set the REC/
Monitor
46
PLAY.
PLAY.
199 English
Reference
page
Problem
Cause
Action
Hold the
The image is
too dark.
The flash was
blocked by a
camera
finger or other correctly, and
68
object.
make sure the
flash is not
obstructed.
The subject
was too far
away.
Capture the
image in the
range of
operation of the
flash.
213
The subject
was lit from
behind.
Use the forced
flash mode.
77, 102
119
Viewing
images
Use the
exposure
compensation
function.
Use the spot
light-measuring
mode.
110
111
There is not
enough light.
Adjust the ISO
sensitivity
setting.
The video clip
picture is
flickering.
The video clip
was filmed
under
Set the flicker-
reduction
setting to on.
152
fluorescent
lighting.
English 200
TROUBLESHOOTING
Reference
page
Problem
Cause
Action
Select a
different flash
mode.
The image is
too bright.
The forced
flash mode is
selected.
77, 102
119
The subject
was too bright. exposure
compensation
Use the
function.
The ISO
sensitivity
setting is
incorrect.
Set the ISO
sensitivity to
111
=
.
The image is
not in focus.
The subject is
too close to the image with the
camera.
Capture the
subject within
the
photographable
The focus
setting is not
correct.
72, 109
range.
Viewing
images
Select the
correct focus
setting for your
needs.
The camera
moved when
Hold the
camera
correctly and
the [
]
button was
pressed.
(camera
shake)
slowly press
the [
]
button halfway
to lock the
focus. Then
press the [
button all the
way to capture
the image.
68, 75
The focus is
not locked
properly.
]
The lens is
dirty.
Clean the lens.
—
201 English
Reference
page
Problem
Cause
Action
The colors of
the images
captured
indoors are not
correct.
This is due to
ambient
lighting.
Capture the
image using
the forced flash
mode.
77, 102
113
The white
Set the white
balancesetting balance setting
is incorrect. correctly.
The strap or a Hold the
finger was
blocking the
lens.
A part of the
image is
missing.
camera
correctly, and
make sure the
lens is not
68
Viewing
images
obstructed.
“No image” is
shown.
There is no file Play back after
in the installed capturing
card.
images or
—
making audio
recordings.
During audio
The playback
Adjust the
playback,there volume setting playback
87
is no sound.
on the camera volume.
is too low.
English 202
TROUBLESHOOTING
Reference
page
Problem
Cause
Action
There is no
color in the
image.
The TV output Select the
setting is not
correct.
correct TV
output setting.
156
The image is
distorted.
Both the
dedicated
Make the
correct
S-AV interface connection.
cable and the
dedicated
173
component
cable are
connected.
Connecting
to a TV
No image or
sound.
The camera is Follow the
not correctly
connected to
the TV.
instructions to
make the
connection
correctly.
172 to
175
The TV input is Set the input
not set
correctly.
on the TV to
“VIDEO” or
“HDMI”.
The edge of
the image is
cut off.
This is a
characteristic
of the TV.
Not a
malfunction.
—
You cannot
edit or rotate
an image.
The protect
mode is set.
Cancel the
protect mode.
Image
editing
122
203 English
Reference
page
Problem
Cause
Action
The camera is The AC
Check that the
power cord of
the AC adaptor
is connected
correctly.
set in the
adaptor is not
docking station connected to
29
but the
the docking
station.
installed
battery is not
being
The camera is When inserting
not correctly
connected to
the docking
station.
the camera in
the docking
recharged.
station, push
down on it to
make sure that
the connection
between the
camera and the
docking station
is secure.
29, 35
Charging
The camera is Turn the
turned on.
camera off.
Alternatively,
press the
docking
station’s
218
operation
mode button
[
] to light
the multi-
indicator red.
The “No card”
message
appears.
No card is
inserted.
Turn off the
power and
insert a card.
27
The “Image is
protected”
message
appears and
the file cannot
be deleted.
You have
Set the protect
setting for the
file to UNLOCK.
attempted to
delete a file
that is
protected from
accidental
erasure.
Misc.
122
English 204
TROUBLESHOOTING
Reference
page
Problem
Cause
The audio
Action
The audio
Set the audio
guide does not guide setting is guide setting to
144
sound.
set to “OFF”.
“ON”.
The recording
The recording
Depending on
capacity is less capacity is less the card, the
than that
indicated in the specified for
section
“Possible No.
of Images/
Possible
than the value
capacity may
be less than the
specified value.
Please refer to
the instructions
that
the card.
—
Shooting Time/
Possible
accompanied
the card.
Recording
Time”
(page 216)
.
The battery
pack appears
to be swollen.
Normal change Not a safety
Misc.
occurring with
battery use.
Even with
hazard. If the
battery quickly
becomes
normal correct depleted, for
use of the
lithium-ion
example, it has
reached the
battery, it has a end of its
tendency to
swell as the
number of
charge and
discharge
service life.
Replace it with
a new battery
pack.
—
cycles adds up
and it gradually
approaches
the end of its
service life.
205 English
Docking station
Reference
page
Problem
Cause
Action
The remote
control unit
does not seem aimed at the
The remote
control unit is
Aim the remote
control unit at
the camera’s
remote control
sensor (within
to work.
TV (not at the
camera’s
remote control a range of
sensor).
about 15
degrees left or
right
horizontally
from the
remote control
sensor).
Something is
Remove or
obstructing the move the
spacebetween obstructing
Remote
control
unit
30, 31
the remote
control unit
and the
object.
camera’s
remote control
sensor.
The remote
control unit
battery is
Replace with a
new battery.
consumed.
The remote
control unit
battery is not
correctly
Take care that
the (+) and (–)
poles are
correctly
oriented.
inserted.
English 206
TROUBLESHOOTING
Reference
page
Problem
Cause
Action
The remote
control unit
The remote
control unit is
Operate the
remote control
does not seem too far from the unit from a
to work. camera’s position up to
remote control 7 meters from
30, 31
sensor.
the docking
station.
Remote
control
unit
The remote
control codes
for the remote
control unit
Change the
remote control
code.
32
and camera’s
remote control
sensor are
different.
207 English
Notes regarding the Scene Select feature and
filters
Scene Select
Setting
Remarks
Sports
a
Portrait
>
Landscape
Focus range: + cannot be selected.
+
Night view portrait
/
Snow & beach
k
Fireworks
+
Focus range: Fixed at *.
Flash: Fixed at l.
Focus range: + cannot be selected.
Flash: Fixed at l.
Still image NR: Fixed at “OFF”.
Lamp*
Q
* When recording a video clip in dark surroundings, the shutter speed
decreases to 1/15 sec in order to produce a sufficiently bright image.
However, when the flicker-reduction function is set to “ON”, the shutter
speed during video clip recording becomes 1/100 sec or 1/120 sec.
English 208
TROUBLESHOOTING
Filter
Setting
Remarks
Cosmetic
Focus range: + cannot be selected.
%
Monochrome
W
Still image mode: J cannot be selected.
Focus range: + cannot be selected.
Sepia
,
About the scene select function and focus range
settings
i The scene select function changes to = when the focus range is set to
+.
i Even if you set the focus range to *, + or -, it changes to -
when the scene select function is set to any setting other than =.
209 English
SPECIFICATIONS
Camera
Type
Digital Movie Camera (recording and playback)
Recorded image
file format
Still images:
JPEG format (DCF, DPOF, Exif 2.2 compliant)
Note: Designed mainly by the Japan Electronics
and Information Technology Industries
Association (JEITA), DCF (Design rule for
Camera File system) is standard for digital
still camera image files to provide
interoperability between digital photography
devices for the images stored on removable
memory cards. However, it is not
guaranteed that all devices will support the
DCF standard.
Video clips:
Conforms to ISO-standard MPEG-4 AVC/H.264*
Audio:
MPEG-4 audio (AAC compression)
48 kHz sampling rate, 16-bit stereo format
Data storage
media
SD Memory Card (equivalent to a maximum 8 GB
SDHC Memory Card)
Image sensor/
camera effective
number of pixels
CMOS sensor
Still images: Approx. 4 million pixels
Movies (HD mode): Approx. 3.56 million pixels
Movies (SD mode): Approx. 2.18 million pixels
* Video clip files recorded with models VPC-CA65 and VPC-CG65 are in
the same H.264 format as this model. However, such files cannot be
played back, since they are not compatible due to differences such as the
data compression method.
English 210
SPECIFICATIONS
Still image
shooting mode
(recording
J: 3264 × 2448 pixels (approx. 8 million pixels)
M: 2288 × 1712 pixels (approx. 4 million pixels,
low compression)
resolution)
L: 2288 × 1712 pixels (approx. 4 million pixels,
normal compression)
*: 2496 × 1408 pixels (approx. 3.5 million pixels,
16:9 aspect ratio)
+: 1920 × 1080 pixels (approx. 2 million pixels,
16:9 aspect ratio)
G: 1600 × 1200 pixels (approx. 2 million pixels)
,: 1280 × 720 pixels (approx. 900,000 pixels, 16:9
aspect ratio)
[: 640 × 480 pixels (approx. 300,000 pixels)
P: 2288 × 1712 pixels (approx. 4 million pixels,
sequential shots)
Video clip
recording mode
(recording
HD mode
!: 1920 × 1080 pixels, 60 field/s
": 1280 × 720 pixels, 60 fps
&: 1280 × 720 pixels, 30 fps
SD mode
resolution)
(: 640 × 480 pixels, 60 fps
): 640 × 480 pixels, 30 fps
l: 320 × 240 pixels, 30 fps
* The 60 fps frame rate of this camera is 59.94 fps,
and the 30 fps frame rate is 29.97 fps.
White balance
Lens
Full-auto TTL, manual setting possible
Optical 10×
Still image shooting: f = 6.3 mm to
63.0 mm (35 mm film camera
conversion 38 mm to 380 mm)
Video clip recording: f = 6.3 mm to
63.0 mm (35 mm film camera
conversion 49.7 mm to 497 mm)
Autofocus, 8 groups, 11 elements
(including three with five aspheric
surfaces)
zoom lens
Galvanometer iris
Internal ND filter
Aperture
Open F = 1.8 (Wide) to 2.5 (Tele)
Smallest F = 8.0 (Wide) to 11 (Tele)
211 English
Exposure control
type
Programmable AE/Shutter speed priority AE/
Aperture priority AE/Manual exposure control
Exposure compensation available from the Shooting
Setting Screen (0 1.8 EV in 0.3 EV steps)
Light-measuring
mode
Multi-section measuring, center-weighted
measuring, spot measuring
Range
Total mode:
10 cm (3.94 in.) to infinity (Wide end)
1 m (3.28 ft.) to infinity (Tele end)
Normal mode:
80 cm (31.50 in.) to infinity
Super macro mode:
1 cm (0.39 in.) to 1 m (3.28 ft.) (Wide end only)
Digital zoom
For shooting:
1× to approx. 10×
For playback:
1× to 58× (varies with resolution)
Shutter speed
Still image shooting mode: 1/2 to 1/1,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/1,000 sec.)
Sequential shots mode: 1/15 to 1/1,000 sec. (no
flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max.: when scene select function is set
to lamp mode Q)
Sensitivity
Still image shooting (standard output sensitivity*)/
video clip recording mode:
Auto (video clip recording: ISO 50 to 800; still
image shooting: ISO 50 to 200)/ISO 50, ISO 100,
ISO 200, ISO 400, ISO 800, ISO 1600, and
ISO 3200 (switchable from Shooting Setting
Screen)
* Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
* Maximum ISO sensitivity up to 1600 equivalent
when Scene Select function is set to Q.
* Recorded at ISO 1600 in the video clip
recording mode, even if ISO sensitivity setting is
z.
English 212
SPECIFICATIONS
Minimum subject
illumination
9 lux (1/30 sec in the scene select AUTO mode)
3 lux (1/15 sec in the HIGH SENSITIVITY or lamp
mode)
Image stabilizer
Monitor
Movie: Electronic
Still image: Multi-calculation electronic
2.7" (6.9 cm) low-temperature polysilicon TFT color
wide liquid crystal (transmissive), approx.
230,000 pixels
Flash working
range
GN = 6.2
Approx. 20 cm (7.87 in.) to 6.0 m (19.69 ft.)
(Wide)
Approx. 1.0 m (3.28 ft.) to 5.0 m (16.40 ft.) (Tele)
Flash modes
Focus
Auto-flash, forced flash, flash off, red-eye reduction
TTL-type AF (still image shooting mode: 9-point
range finder/spot focus; video clip recording mode:
Continuous focus), manual focus (22 steps)
Self-timer
Approx. 2-second delay, 10-second delay
Ambient
environment
Temperature
0 to 40 °C (32 to 104°F) (operation),
–20 to 60 °C (–4 to 140°F) (storage)
Humidity
30 to 90% (operating, no
condensation)
10 to 90% (storage, no
condensation)
Power supply
Battery pack
(supplied)
Li-ion battery pack (DB-L50) ×1
AC adaptor
(supplied)
VAR-G8
Power consumption
4.2 W (When using the Li-ion
battery during recording)
Dimensions (excluding protrusions) 90 (W) × 112.6 (H) × 54.5 (D) mm
3.54 (W) × 4.43 (H) × 2.15 (D) in.
(Maximum dimensions)
Volumetric capacity: Approx. 272 cc
Weight
Approx. 268 g (9.5 oz.) (camera
only [without battery pack and
card])
213 English
Camera connectors
[COMPONENT/ Regrouped jack
AV] (480p/
Audio
output
265 mVrms (–9 dBs), 12 kΩ or less, stereo
1080i/720p
output) terminal*
Video
output
1.0 Vp-p, 75 Ω unbalanced, sync negative,
composite video
NTSC color TV system/PAL color TV system
(switchable from the Option Screen)
S-video Y signal: 1.0 Vp-p, 75 Ω, unbalanced, sync
output
negative
C signal: 0.286 Vp-p, 75 Ω, unbalanced
NTSC color TV system/PAL color TV system
(switchable from the Option Screen)
For 480p/1080i/720p video output
Y signal: 1.0 Vp-p/75 Ω unbalanced, tri-level sync
Pb and Pr signals: 0.7 Vp-p/75 Ω unbalanced
[HDMI] terminal* Video output
Total number of scan lines (effective number of scan
lines): 750p (720p)/1125i (1080i)/525p (480p)
Audio output: L-PCM 48 kHz sampling
[USB] terminal*
USB 2.0 High-speed
[MIC]
(microphone
input) terminal
ø2.5 mm stereo mini jack (converts to a ø3.5 mm
stereo mini jack by the supplied microphone connection
cable), 2 kΩ.
Sensitivity: less than –42 dB (plug-in power type
microphone)
Headphone jack ø3.5 mm mini-jack (stereo headphone jack, impedance
16 Ω to 32 Ω)
Audio
output
310 mVrms (–8 dBs), 47 kΩ, stereo
DC IN (external
DC 5 V (for exclusive use with the supplied AC adaptor
DC power input) [VAR-G8])
terminal
*
via the docking station
English 214
SPECIFICATIONS
Battery life
Shooting
Still image
shooting mode
Approx. 340 images:
CIPA standard (when a Hagiwara
Sys-Com 512 MB SD Memory Card
is used)
Video clip
recording mode
Approx. 120 minutes:
Recorded in ! mode
Playback
Approx. 275 minutes:
Monitor on, continuous playback
i Until battery pack runs out when using a fully charged battery pack at a
25 °C (77°F) ambient temperature.
i The operation time may vary depending on the conditions of the battery
pack and the conditions of use. Especially when used at temperatures
below 10 °C (50°F), the battery pack operation time is significantly
reduced.
215 English
Possible No. of Images/Possible Shooting Time/
Possible Recording Time
The table shows the possible number of captured images and the
possible recording times for commercially available SD Memory Cards
(2 GB, 4 GB, 8 GB).
Shooting/
recording
mode
SD Memory Card
4 GB
Resolution
setting
2 GB
8 GB
J
M
L
*
+
t
,
[
P
756 images
1,010 images
1,510 images
1,670 images
2,810 images
2,950 images
1,510 images
2,030 images
3,020 images
3,350 images
3,030 images
4,080 images
6,070 images
6,730 images
Still image
mode
5,640 images 11,310 images
5,900 images 11,850 images
6,200 images 12,410 images 24,900 images
15,500 images 31,020 images 62,250 images
1,510 images
3,020 images
6,070 images
1 hr. 25 min.
1 hr. 53 min.
2 hr. 46 min.
5 hr. 14 min.
17 hr. 21 min.
! " 21 min. 21 sec. 42 min. 44 sec.
&
(
)
l
28 min. 11 sec. 56 min. 25 sec.
Video clip
mode
41 min. 26 sec.
1 hr. 18 min.
4 hr. 19 min.
1 hr. 22 min.
2 hr. 36 min.
8 hr. 38 min.
Audio
recording
mode
—
32 hr. 25 min.
64 hr. 53 min. 130 hr. 12 min.
i
The maximum video clip continuous recording time is approx. 5 hours
30 minutes at the
l
setting.
i
i
Up to 13 hours of continuous audio recording is possible.
When recording a video clip using an 8 GB card, recording terminates when
the size of the file currently being recorded reaches approx. 4 GB.
The above values apply when an SD Memory Card by Sandisk is used.
Even with cards of the same capacity, the amount of data that can actually
be stored may differ depending on the card brand, etc.
i
i
i
The continuous shooting time for each video clip will differ depending, for
example, on the card capacity, environmental conditions (temperature and
shooting conditions, etc.).
English 216
SPECIFICATIONS
Docking station
Part number
Power supply
Rated output
PDS-HD1000
DC 5V
DC 5V
Ambient
environment
Temperature 0 to 40 °C (32 to 104°F) (recharge),
–20 to 60 °C (–4 to 140°F) (storage)
Humidity
20 to 80% (no condensation)
Dimensions
Weight
105.5 (W) × 44.4 (H) × 80.5 (D) mm
4.15 (W) × 1.75 (H) × 3.17 (D) in.
Approx. 86 g (3.0 oz.)
Remote control unit
Part number
Power supply
Dimensions
BRC-C3
Lithium battery (CR2025)
35 (W) × 56.6 (H) × 6.5 (D) mm
1.38 (W) × 2.23 (H) × 0.26 (D) in.
Weight
Approx. 11 g (0.4 oz.) (including battery)
217 English
Concerning the multi-indicator and blue LED
indicator
Multi-indicator
The camera’s multi-indicator will light, flash, or be off, depending on the
different camera operations.
Multi-indicator
Multi-indicator
Color
Green
Orange
Camera status
status
Lit
Connected to a
computer or
printer
Power save
mode active
Flashing
Connected to a
TV
Lit
Lit
Charging
During self-
Slow timer
photography
Red
Fast Accessing card
Flashing
Battery charge
Very error or rise in
fast internal
Blue LED indicator
temperature
Blue LED indicator
The blue LED indicator lights during certain operations, such as when the
camera is turned ON or OFF, when saving video clip or still image data,
during video clip playback, etc.
English 218
SPECIFICATIONS
Supplied AC adaptor
Part number
Power source
Rated output
VAR-G8
AC 100 V to 240 V, 50/60 Hz
DC 5 V, 2.0 A
0 to 40 °C (32 to 104°F) (operation),
–20 to 60 °C (–4 to 140°F) (storage)
Temperature
Humidity
Ambient
environment
20 to 80% (no condensation)
49.5 (W) × 25.5 (H) × 68.3 (D) mm
1.95 (W) × 1.00 (H) × 2.69 (D) in.
Dimensions
Weight (without power cord) Approx. 169 g (6.0 oz.)
VPC-
HD1000
AC 125 V, 7 A
Power cord
rated value
VPC-
HD1000EX
AC 250 V, 2.5 A
VPC-
HD1000GX
Differs depending on the country
i When using the supplied AC adaptor abroad, the power cord may need to
be replaced in accordance with local requirements. Please contact your
local dealer for details.
Supplied Li-ion battery pack
Model number
Voltage
DB-L50
3.7 V
Capacity
1,900 mAh
Ambient
environment
Temperature 0 to 40 °C (32 to 104°F) (during use, when
charging)
–10 to 30 °C (14 to 86°F) (storage)
Humidity
10 to 90% (no condensation)
Dimensions
Weight
53.1 (W) × 11.4 (H) × 35.3 (D) mm
2.09 (W) × 0.45 (H) × 1.39 (D) in.
Approx. 41 g (1.4 oz.)
219 English
Others
Mac OS, QuickTime, iPod and iTunes are trademarks of Apple Inc., registered
in the U.S. and other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in
the USA and other countries.
Intel and Pentium are registered trademarks of Intel Corporation (USA).
®
®
®
In this manual, the Microsoft Windows 2000 operating system, Microsoft
®
®
®
Windows XP operating system, and Microsoft Windows Vista operating
system are collectively referred to as “Windows”.
SDHC is a trademark.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
All other company and product names are registered trademarks or
trademarks of their respective owners.
CAUTION
i It is forbidden to copy this manual, whole or in part, without prior written
permission.
i All images and illustrations given in this manual are for explanation
purposes and may differ slightly from that of the actual product. Also,
actual specifications are subject to change without prior notice and
therefore may differ from the contents of this manual.
English 220
SPECIFICATIONS
Before capturing those important shots, be sure to first take a
test shot to comfirm that your camera is set up and ready to go
i Sanyo Electric shall not be held responsible for any problems resulting
from the use of this camera.
i Sanyo Electric declines all responsibility for damages due to improper use
of the camera, failure to adhere to the instructions given in this manual, or
repairs or changes done by those other than a technician authorized by the
manufacturer.
i Sanyo Electric shall not be held responsible for any damage caused by
optional devices or consumable items used with the camera other than
those supplied with the camera or those specified by Sanyo Electric.
i As a precaution against losing data in case of a problem with your hard
disk that prevents you from accessing your saved files, it’s a good practice
to regularly make backup copies, on a DVD for example, of the files in the
hard disk you are using for the Xacti Library. Sanyo Electric shall not be
held responsible for loss of files/data due to failure of your hard disk.
i Sanyo Electric shall not be held responsible for any losses or loss of
revenue resulting from the loss of data caused by the malfunction, or the
repairing of a malfunction, of the camera.
i The images captured with this camera will differ in quality from pictures
taken with a standard film camera.
221 English
HINTS FOR TAKING PICTURES
Taking great pictures in difficult surroundings is easier than you might think.
By keeping a few points in mind and choosing the correct settings, you can
create photos that you’ll be proud to display and share.
If images are blurred even when the autofocus is
used
Your camera employs an autofocus function. When you snap a picture using
the autofocus, the camera automatically adjusts the settings so that the
image will be in focus. If you are getting blurred images even when using the
autofocus, one or more of the following might be the reason.
k How the autofocus works
The autofocus is activated when the [
Press the [ ] button slightly, and the target mark will appear on the monitor
to indicate that the autofocus has been activated. Next, continue to gently
press the [ ] button all the way to snap the picture. This two-step method is
] button is gently pressed halfway.
the way to ensure that your photos are perfectly focused.
k Reasons for unfocused images
1 The [
] button was pressed all the way in one step.
2 After the image was focused, the subject moved.
h Even if camera focuses the subject once, if the distance between the
camera and the subject is changed, the subject may become out of
focus.
3 The focus setting is not set for the correct distance.
h If you shoot a close-up subject with the camera set to the normal focus
mode, or if you shoot a subject at normal distance with the camera set
to the super macro (close-up) mode (pages 72 and 107), the image will
not be in focus.
k Preventing blurred images
1 Confirm that the camera is set to the correct focus mode for your subject.
2 Hold the camera correctly, and press the [
3 Wait for the target mark to appear in the monitor, and holding the camera
steady, gently continue to press the [ ] button all the way down.
] button halfway.
Following these steps for a gentle but firm pressing of the [
ensure that you get beautifully focused photos.
] button will
English 222
HINTS FOR TAKING PICTURES
Photographing a moving subject
Situation: You would like to snap an action shot of a moving child or pet. The
autofocus is activated, but because the subject is moving, the image may be
blurred. In particular, when the distance between the camera and the subject
is changing, it is difficult to lock the focus on the subject. Here are some hints
for successfully capturing images of moving subjects.
k Reasons for unfocused images
When the [
] button is gently pressed halfway, the camera’s autofocus
works by determining the distance between the camera and the subject.
Once the subject is in focus, if it then moves before the picture is snapped,
the image may be out of focus. This often happens when you once lock the
focus on a subject and then wait for the right moment to snap the picture.
And, conversely, a blurred image may result if you press the [
] button all
the way in one step in an attempt to quickly capture an action scene, thus
failing to activate the autofocus in time.
k Preventing blurred images (How to use the manual focus [page 108])
In addition to the autofocus, a manual focus mode is also incorporated in your
camera. In the autofocus mode, the distance between the camera and the
subject is automatically determined when you press the [
] button halfway.
In contrast to this, with the manual focus mode, you manually set the focus by
specifying the correct distance between the camera and the subject before
taking the picture.
k How to photograph a moving subject
1 Set the camera’s focus mode to the manual focus. Set the focus distance
to the correct distance between the camera and the subject.
2 When the subject is at the set focus distance, gently press the [
button all the way down.
]
<Advantage of using the manual focus>
i Images can be quickly captured without waiting for the autofocus to
activate.
i Because you are presetting the focus distance, the focus can be more
accurate.
<Using the manual focus effectively>
i When photographing a moving subject, press the [
] button just before
the subject reaches the focus distance, and the shutter will be released
when the subject is at the correct distance.
i Use manual focus to avoid incorrectly focused images when there is an
object between the camera and the subject you wish to focus on.
223 English
Shooting portraits (portrait mode >)
Points:
i Choose a background that doesn’t detract from your subject.
i Move in close to your subject.
i Pay attention to lighting and how it affects your subject.
NOTE
i If the background is distracting, it will not show your subject to his best
advantage. Move in closer to your subject or zoom in so that the
background does not compete with the subject.
i In portrait photography your subject is clearly the central figure, so try
techniques that allow the subject to stand out.
i If light is coming from behind your subject (backlit), his face will appear
dark. You can get a better picture by using the flash, for example, or
changing the exposure compensation setting.
Photographing moving subjects (sports mode a)
Points:
i Match the camera’s movement with that of the subject.
i Set the zoom to the Wide end (wide-angle).
i Don’t be too hesitant to press the [
] button, or you’ll miss the action.
NOTE
i Tips to not missing those great action shots: Make sure you’re holding the
camera correctly. Keep the subject in the lens at all times, moving the
camera with him while waiting for the right shot. Move your whole body–not
just your arms–with the camera while shooting.
i Blurred images are more likely when the zoom is set to the Tele end than
the Wide end. Set the zoom as close as possible to the Wide end.
i Learn to press the [
] button quickly yet smoothly the instant your photo
chance occurs.
English 224
HINTS FOR TAKING PICTURES
Night photography (night view portrait mode /)
Points:
i Avoid camera shake.
i Increase the ISO sensitivity.
NOTE
i Camera shutter speed during night photography is considerable slower, so
there is a much greater chance that your photographed images will be
blurry. Stabilize the camera when shooting.
i You can photograph your subject with the night scene in the background by
using the flash. Be careful not to shoot too close to the subject, however, or
your subject’s face will appear too bright.
i After the flash operates, keep the camera and the subjects motionless for
about 2 seconds.
Photographing scenery (landscape mode +)
Points:
i Shoot using a high resolution.
i For zoom photography, use the optical zoom.
i Pay attention to picture composition.
NOTE
i When shooting with a wide-angle setting, or if you intend to enlarge the
photo, the higher the resolution, the better.
i To zoom in on distant scenery, it’s better to use the optical zoom. Using the
digital zoom produces a coarser image. Hold the camera securely, keeping
your elbows close to your body and making sure the camera is stable.
Taking care to stabilize the camera will increase the likelihood of getting a
clear photo.
i Don’t forget to pay attention to picture composition; note perspective and
be aware of how the placement of objects affects the scene.
225 English
SANYO Electric Co., Ltd.
|
Tokina IR VARIFOCAL LENS TVR2514DCIR User Manual
Telex Car Stereo System QSB 1 User Manual
Sub Zero 427R User Manual
Sony CARL ZEISS PLANNER T 50MM F1.4 SAL50F14Z User Manual
Sharp EL W535B User Manual
Samsung STB 340PCM User Manual
Samsung HT D5210C User Manual
Samsung BDF7500 User Manual
Rosewill R BC 01 User Manual
Rockford Fosgate RFX9110 User Manual