Peavey Electronics Car Speaker SSE UB2T User Manual

SPECIFICATIONS  
SSEUB2T  
Under Balcony Array  
Description  
UB2T has a perforated metal grille covered  
with cloth for a subtle appearance. Built-  
in hanging points provide stability and  
flexibility in coverage adjustment.  
a clear, smooth full-range sound from a  
hung system. Input to the array is via  
barrier strip screw terminals. A built-in  
70V/100V transformer with switch-  
selectable taps and an 8-ohm input  
option provide maximum flexibility for  
installations. A separately available  
active crossover with equalization assures  
smooth, even frequency response across  
the operating band.  
Designed for permanent professional  
installation in schools, churches, theaters,  
auditoriums, gyms, night clubs, offices and  
theme parks, the SSE UB2T is a quarter-  
spherical coverage array providing mid/  
high frequency coverage of an entire small  
room, or under a balcony or other barrier  
spot/delay coverage.  
This mid/high frequency quarter-spherical  
array is comprised of four 2” neodymium  
speakers, with wide dispersion and a very  
smooth response across their operating  
band. When mated with a companion  
woofer module, this combination provides  
Constructed of premium plywood for  
strength, rigidity and light weight, the SSE  
Features  
• Uniquely angled speakers provide wide,  
even response  
• 180º by 90º pattern covers a small room or  
space  
• Small size makes it unobtrusive  
• Processor-based crossover and EQ for  
maximum performance  
• Dual-orientation design for more defined  
coverage  
• Designed for placement at the ceiling/  
wall junction or under-balcony locations  
• Hanging points incorporated  
• Built-in 70V/100V transformer  
• Whole-room mid/high frequency  
coverage from one enclosure  
• Available in black and white painted  
finishes  
• Switch selected taps at 30W, 15W, 7.5W,  
3.7W, 1.8W and 8 ohms  
SPECIFICATIONS  
SSEUB2T  
suspended, resulting in serious injury and  
property damage. DO NOT suspend or  
mount any other product or device from  
this enclosure. Use only the correct mating  
hardware. All associated rigging is the  
responsibility of others. This unit was  
designed to be hung on the wall or ceiling  
with the use of a special bracket that fits  
into the enclosure, via a slot on the rear,  
and an insert located on the top rear of the  
cabinet. Use only the supplied bracket.  
Amplitude Response (1m Equivalent On-Axis)  
110  
100  
90  
80  
HF Only vs System  
70  
SSE- UB2  
W/ woofer  
Architectural & Engineering  
Specifications  
60  
20  
50  
100  
200  
500 1k  
Frequency (Hz)  
2k  
5k  
10k  
20k  
The loudspeaker system shall have an  
operating bandwidth of 160 Hz to 16 kHz  
with signal processing, using the 8 ohm  
input. The nominal output level shall be  
90 dB when measured at a distance of one  
meter with an input of one watt into the 8  
ohm input, where the nominal impedance  
shall be 8 ohms. A 70V/100V distributed  
line transformer shall be included, with  
a selector switch to select between  
transformer taps of: 30W, 15W, 7.5W, 3.7W,  
1.8W or to an 8 ohm nominal input. The  
maximum continuous power handling shall  
be 50 watts, maximum program power of  
100 watts and a peak power input of at  
least 200 watts, with a minimum amplifier  
headroom of 3 dB, for the 8 ohm input. The  
transformer input maximum continuous  
power handling shall be 30W, with a  
maximum peak power of 60W, for either  
a 100V or 70V input line. The nominal  
radiation geometry shall be 180 degrees  
in the horizontal plane and 90 degrees  
in the vertical plane. The overall outside  
dimensions shall be 3.23 inches high by  
13.78 inches wide by 6.12 inches deep. The  
weight shall be 5 pounds. The mounting/  
flying bracket shall be included with the  
unit. The loudspeaker system shall be a  
Peavey Sanctuary Series model SSE UB2T.  
Figure 1  
Impedance  
100  
50  
30  
20  
Z
( )  
10  
5
3
2
1
20  
50  
100  
200  
500 1k  
Frequency (Hz)  
2k  
5k  
10k  
20k  
Figure 2  
Beamwidth  
360  
300  
180  
140  
100  
80  
60  
40  
30  
3 + 2 YEAR LIMITED WARRANTY  
Horizontal  
Vertical  
NOTE: For details, refer to the warranty  
statement. Copies of this statement may be  
obtained by contacting Peavey Electronics  
Corporation, P.O. Box 2898, Meridian,  
Mississippi, 39301-2898.  
20  
50  
100  
200  
500 1k  
Frequency (Hz)  
2k  
5k  
10k  
20k  
Figure 3  
3
Q & Directivity Index  
20  
10  
0
100  
Q
Di  
10  
1
20  
50  
100  
200  
500 1k  
Frequency (Hz)  
2k  
5k  
10k  
20k  
Figure 4  
Harmonic Distortion : 1% Rated Power  
110  
100  
90  
80  
70  
60  
50  
40  
20  
50  
100  
200  
500 1k  
Frequency (Hz)  
2k  
5k  
10k  
20k  
2nd Harmonic  
3rd Harmonic  
Figure 5  
Harmonic Distortion : 10% Rated Power  
120  
110  
100  
90  
80  
70  
60  
50  
20  
50  
100  
200  
500 1k  
Frequency (Hz)  
2k  
5k  
10k  
20k  
2nd Harmonic  
3rd Harmonic  
Figure 6  
4
SPECIFICATIONS  
SSEUB2T  
Vertical Polar Plots  
1/3 octave averaged plotted on ISO 1/3 octave centers from 200 Hz - 16 kHz.  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
315 Hz  
200 Hz  
250 Hz  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
500 Hz  
90o  
630 Hz  
400 Hz  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
800 Hz  
90o  
-90o  
1 kHz  
90o  
-90o  
1.25 kHz  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
1.6 kHz  
2 kHz  
2.5 kHz  
5
Vertical Polar Plots  
1/3 octave averaged plotted on ISO 1/3 octave centers from 200 Hz - 16 kHz.  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
5 kHz  
3.15 kHz  
4 kHz  
90o  
90o  
90o  
60o  
60o  
60o  
30o  
30o  
30o  
0o  
0o  
0o  
-30o  
-30o  
-30o  
-60o  
-60o  
-60o  
-90o  
-90o  
-90o  
8 kHz  
90o  
10 kHz  
6.3 kHz  
90o  
60o  
60o  
30o  
30o  
0o  
0o  
-30o  
-30o  
-60o  
-60o  
-90o  
-90o  
12.5 kHz  
16 kHz  
6
SPECIFICATIONS  
SSEUB2T  
Horizontal Polar Plots  
1/3 octave averaged plotted on ISO 1/3 octave centers from 200 Hz - 16 kHz.  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
315 Hz  
200 Hz  
250 Hz  
0o  
0o  
0o  
30o  
-30o  
30o  
30o  
30o  
-30o  
-30o  
-30o  
30o  
30o  
30o  
-30o  
-30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
630 Hz  
500 Hz  
400 Hz  
0o  
0o  
0o  
30o  
-30o  
60o  
-60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
800 Hz  
1 kHz  
1.25 kHz  
0o  
0o  
0o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
1.6 kHz  
2 kHz  
2.5 kHz  
7
Horizontal Polar Plots  
1/3 octave averaged plotted on ISO 1/3 octave centers from 200 Hz - 16 kHz.  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
5 kHz  
3.15 kHz  
4 kHz  
0o  
0o  
0o  
30o  
-30o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
90o  
-90o  
10 kHz  
8 kHz  
6.3 kHz  
0o  
0o  
30o  
-30o  
30o  
-30o  
60o  
-60o  
60o  
-60o  
90o  
-90o  
90o  
-90o  
12.5 kHz  
16 kHz  
8
SPECIFICATIONS  
SSEUB2T  
Mounting Instructions:  
holes can be used in a corner for maximum  
safety and reliability.  
This is just one example of the steps that  
one might take to install the SSE UB2T by  
mounting it on a wall or ceiling. Other types  
of walls/ceilings other than a dry-wall panel  
and 2x4 stud construction may require  
different fasteners and steps to safely hang  
the SSE UB2T. Consult a certified structural  
engineer to assure that the SSE UB2T will be  
properly and safely hung under the specific  
conditions present.  
Mounting Instructions:  
As a helpful guide to assembling the bracket  
onto the cabinet for hanging the cabinet  
on a wall, the following assembly steps  
are one example of the steps you might  
take to prepare the bracket and attach the  
cabinet to a drywall-covered 2x4 stud wall,  
after consulting with a certified structural  
engineer.  
Locate the mounting hole on the selected  
spot by placing the bracket against the  
ceiling/wall in the desired pre-selected  
location. Mark this location by lightly driving  
a small nail into the wall surface through  
the correct bracket hole (centered) and then  
removing the nail. Pre-drill the fastener  
hole with the proper size drill bit to allow  
the fastener shaft to enter the stud without  
splitting it, but not so large as to allow the  
threads to strip out. Next install the bracket  
onto the ceiling/wall in the orientation  
selected, being sure to install it using the  
appropriate fastener (nominally a 1/4” x 3”  
lag bolt) into an inner wall or ceiling stud.  
Never drive a lag bolt into just drywall or just  
paneling as this will not hold the cabinet  
safely. Consult a certified structural engineer  
for all mounting details.  
Remove the bracket from the cabinet by  
unscrewing the shallow-head bolt from the  
nominal bottom of the cabinet (small side),  
noting how the bracket is mated with the slot  
in the cabinet and saving all the hardware  
supplied.  
Note that the SSE UB2T is intended to be  
used with a separate woofer, an electronic  
crossover and two channels of amplification  
to provide full-range performance. The  
SSE UB2T is not a full-range system by  
itself, and only covers the range from  
approximately 200 Hz and up. A number of  
suitable crossover options are available from  
Peavey: the Peavey Digitool, the Peavey  
VSX26 Loudspeaker Controller and the  
SSEArray Controller. The first two units  
have pre-configured setup files that provide  
an optimized crossover and EQ for a flat  
response and level set as a starting place for  
any permanent installation.  
Now is a good time to set the input selector  
to the proper input. Select one of the  
transformer taps, or the 8 ohm input, since it  
would otherwise require that the cabinet be  
dis-mounted from the bracket to change the  
setting.  
The wall fastener will go through the  
Decide where the unit will hang and in which  
orientation (See Figures A and B). Note that  
the supplied bracket can have the mounting  
bolt go through the rear of the bracket or the  
end opposite of the cabinet slot, so there are  
two options to allow maximum flexibility in  
mounting to the ceiling or the wall. With the  
help of a certified structural engineer, find a  
wall, ceiling stud or other suitable location  
and select which hole on the bracket will  
best interface with that spot. Both mounting  
appropriate bracket hole with a lock washer  
between it and the bracket. Tighten down  
this fastener making sure the bracket is  
oriented as desired. Once the bracket is in  
place and the fastener has been tightened  
firmly, connect the cabinet input terminals to  
the speaker wiring with the wires routed as  
desired. Place the cabinet onto the bracket  
in its factory configuration and insert and  
tighten the shallow-head bracket mounting  
bolt removed in the first step.  
The woofers in the SSE line that mate well  
with the SSE UB2T are the SSE 210 and the  
SSE 110. One SSE 110 can provide bass for  
up to two SSE UB2T cabinets.  
9
Input Plate:  
10  
SPECIFICATIONS  
SSEUB2T  
Notes:  
11  
by  
Logo referenced in Directive 2002/96/EC Annex IV  
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005  
The bar is the symbol for marking of new waste and  
is applied only to equipment manufactured after  
13 August 2005  
Features and specifications subject to change without notice.  
Peavey Electronics Corporation 5022 Hartley Peavey Drive Meridian, MS 39305 (601) 483-5365 FAX (601) 486-1278 EX000040 ©2005  

RCA DRC62708 User Manual
PUR Water Purification Products Water Cooler PUR300 User Manual
Planar Systems Car Video System LA1950RTS User Manual
Panasonic DMP B500 User Manual
Panasonic Cordless Phone With Answering Machine KX TGA660M User Manual
Panasonic Car Stereo System RD 1201 User Manual
Nikon MB D80 User Manual
Metra Electronics 99 7343 User Manual
MB QUART RAB 1450 User Manual
Kenwood KDS P900 User Manual