Planar Systems Car Video System LA1950RTS User Manual

LA1950RTR / LA1950RTC  
LA1950RTS / LA1950R  
Touch Screen LCD Monitor  
USER’S GUIDE  
Table of Contents  
Usage Notice  
Precautions............................................................................................................................. 1  
Introduction  
About LA1950 Series.............................................................................................................. 2  
Touch Screen for LA1950RTR................................................................................................ 2  
Touch Screen for LA1950RTC................................................................................................ 2  
Touch Screen for LA1950RTS................................................................................................ 3  
Non-Touch Screen for LA1950R............................................................................................. 3  
Package Overview ................................................................................................................. 4  
Installation  
Product Overview ........................................................................................................ 5  
Front View............................................................................................................... 5  
LA1950RTR / LA1950RTC / LA1950RTS Bottom View .............................................. 5  
LA1950R Bottom View ............................................................................................ 5  
Attaching the L-Brackets.............................................................................................. 6  
Side Mount for Your Monitor ........................................................................................ 7  
Connecting the Display (Figure 10.1)........................................................................... 9  
(Figure 10.1)...........................................................................................................10  
User Controls  
Back Panel Controls ...................................................................................................11  
How to Use the OSD Menus .......................................................................................12  
On-Screen Display Menus ..........................................................................................13  
Appendix  
Troubleshooting..........................................................................................................14  
Warning Signal ...........................................................................................................15  
No Signal................................................................................................................15  
Going to Sleep........................................................................................................15  
Out of Range..........................................................................................................15  
Product Dimensions ...................................................................................................16  
Compatibility Modes ...................................................................................................17  
Touch Screen Driver Installation .................................................................................18  
LA1950RTR / LA1950RTC / LA1950RTS Optional Calibration Tool Install:.................18  
LA1950RTR / LA1950RTC / LA1950RTS Install Instructions:.....................................19  
Product Registration and Technical Support ...............................................................21  
Usage Notice  
!
!
Warning - To prevent the risk of re or shock hazards, do not expose  
this product to rain or moisture.  
Warning - Please do not open or disassemble the product as this may  
cause electric shock.  
Precautions  
Follow all warnings, precautions and maintenance as recommended in this user’s manual to  
maximize the life of your unit.  
Do:  
• Turn off the product before cleaning.  
Touch screen surface may be cleaned using a soft clean cloth moistened with  
mild window glass commercial cleaners or 50/50 mixture of water and isopropyl  
alcohol.  
• Use a soft cloth moistened with mild detergent to clean the display housing.  
• Use only high quality and safety approved AC/DC adapter.  
• Disconnect the power plug from AC outlet if the product is not going to be used for  
an extended period of time.  
Don’t:  
• Do not touch the LCD Display screen surface with sharp or hard objects.  
• Do not use abrasive cleaners, waxes or solvents for your cleaning.  
• Do not operate the product under the following conditions:  
- Extremely hot, cold or humid environment.  
- Areas susceptible to excessive dust and dirt.  
- Near any appliance generating a strong magnetic eld.  
- In direct sunlight.  
1
Introduction  
About LA1950 Series  
The LA1950 Series is a 19" at panel screen with an active matrix, thin-lm  
transistor (TFT) liquid crystal display (LCD).  
Features include:  
• Direct Analog signal input  
• Active matrix TFT LCD technology  
• 1280x1024 SXGA resolution  
• 19” viewable display area  
• 31.47 ~ 80 kHz horizontal scan  
• 56 ~ 75 Hz high refresh rate  
• 0.294mm x 0.294mm Pixel pitch  
• Auto adjustment function  
• Multilingual OSD user controls  
• 75 mm/100 mm VESA mount  
• Bracket mount  
• LA1950RTR - 5-wire resistive touch screen with dual RS-232 Serial/USB controller  
• LA1950RTC - Capactive touch screen with dual RS-232 Serial/USB controller  
• LA1950RTS - SAW touch screen with dual RS-232 Serial/USB controller  
• LA1950R - Pure Glass Non-Touch screen  
Touch Screen for LA1950RTR  
• 5-wire resistive touch screen for nger and stylus input  
• Surface: Anti-glare treatment  
• Interface: Dual RS-232 Serial/USB controller  
• Transmittance: 82±5%  
®
• Driver: Windows 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux,  
®
Apple Mac OS  
Touch Screen for LA1950RTC  
• Capacitive touch screen for nger input only  
• Surface: Anti-glare treatment  
• Interface: Dual RS-232 Serial/USB controller  
• Transmittance: 85±5%  
®
• Driver: Windows 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux,  
®
Apple Mac OS  
2
Touch Screen for LA1950RTS  
• Surface Acoustic Wave (SAW) touch screen for nger and stylus input  
• Surface: Anti-glare treatment  
• Interface: Dual RS-232 Serial/USB controller  
• Transmittance: 92±5%  
®
• Driver: Windows 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux,  
®
Apple Mac OS  
Non-Touch Screen for LA1950R  
• Pure Glass  
• Surface: Anti-glare treatment  
• Interface: N/A  
• Transmittance: 91.5±5%  
• Driver: N/A  
3
Package Overview  
LCD Display  
VGA Signal Cable  
Power Cord  
DC Power Supply  
RS-232 Cable  
USB Cable ( A to B )  
(LA1950RTR/RTC/RTS only)  
(LA1950RTR/RTC/RTS only)  
Quick Start Guide  
Bracket  
Screw  
4
Product Overview  
• Front View  
• LA1950RTR / LA1950RTC / LA1950RTS Bottom View  
VGA  
USB  
DC IN  
RJ-11  
RS-232  
• LA1950R Bottom View  
VGA  
DC IN  
RJ-11  
5
Attaching the L-Brackets  
Depending on your mounting scheme, alternately, you may use the L-brackets to mount your  
displays onto your wall or device.  
Find a suitable location for attaching L-brackets.  
A. The left and right sides  
B. The Top and bottom sides  
Bracket  
Bracket  
or  
Bracket  
Bracket  
Note:  
You will need a screwdriver to attach the L-brackets.  
Your kiosk touch monitor included two L-brackets (and four screws, M4x6).  
This equipment is intended to be mounted in accordance with the proper hardware and the  
installation instructions supplied with the product. Use of mounting brackets or screws other  
than those specied in the installation instructions may cause a hazard.  
6
Side Mount For Your Monitor  
This monitor can be mounted to the wooden or concrete wall with 4 screws and a pair  
brackets on the opposites.  
142  
71  
342.9  
140  
140  
26  
7
Customer panel material:  
1. Wooden wall: Ø4.5mm thru holes for M4 screws w/nuts, or no thru holes, screws for wood  
4mm.  
2. Sheet metal: concealed head threaded studs M4 w/nuts.  
LA1950R/RTR/RTC/RTS  
RECOMMENDED CUSTOMER PANEL CUT-OUT  
448.9  
280  
140  
+1  
-0  
385.5  
8
IMPORTANT!  
The wall mounting instructions are for the qualied wall mounting person only!  
!
Warning!  
Please select the proper screws!  
The distance between the back cover surface and the bottom of the screw hole  
is 8 mm. Please use four M4 screws diameter with proper length to mount your  
monitor.  
Please note: the mounting stand must be able to support at least 13.2 lbs (6Kg).  
Connecting the Display (Figure 10.1)  
To setup this display, please refer to the following gure and procedures.  
1. Be sure all equipment is turned off.  
2. Connect the DC adapter to the power connector on the monitor and the other end into  
an electrical outlet (10.1).  
3. Connect the D-SUB cable from the display’s VGA input connector to the D-SUB  
connector of your host computer and tighten the screws (10.1).  
4. Connect the RS-232 or USB cable from the RS-232 or USB port of your display to the  
RS-232 port (10.1) or USB port (10.1) of your computer.  
5. Congure the touch screen. Refer to the “Touch Screen Driver Installation” section on  
page 18.  
6. Once the touch screen is congured, the monitor is ready for use.  
7. Connect the remote control cable to RJ11 port (10.1) (optional).  
!
Notice!  
To ensure the LCD display works well with your computer, please congure the  
display mode of your graphics card to make it less than or equal to 1280 x1024  
resolution and make sure the timing of the display mode is compatible with the  
LCD display.  
We have listed the compatible “Video Modes” of your LCD display in the appendix  
(on page 17) for your reference.  
Don’t connect telephone or internet cable to RJ-11 port.  
Adapter rating:12Vdc 4A min., marked with LPS.  
9
(Figure 10.1)  
LA1950RTR / LA1950RTC / LA1950RTS  
LA1950R  
10  
User Controls  
Back Panel Controls  
Power Enter Down  
Up Menu  
OSD  
Menu off status  
Key  
Menu on status  
Menu appear  
Brightness  
Contrast  
Menu disappear/return to main item  
Main item select up/Adjust up  
Main item select down/Adjust down  
Enter/Select sub-item function  
Power On/Off  
11  
How to Use the OSD Menus  
Icon  
key Name  
Menu  
Up  
Down  
Enter  
Power  
1. Press the “MENU” button to pop up the “on-screen menu” and press “Up” or “Down” button  
to select among the ve functions in the main menus.  
2. Choose the adjustment items by pressing the “Enter ” button.  
3. Adjust the value of the adjustment items by pressing the “Up” or “Down” button.  
4. With the OSD menu on screen, press “ Menu” button to return main menu or exit OSD.  
5. The OSD menu will automatically close, if you have left it idle for a pre-set time.  
6. To Lock the OSD / Power menu buttons, please follow the instructions below.  
(Please note: the monitor has to be turned ON with a valid signal preset)  
(a.) Press “Menu” key , the OSD menu will pops upon display.  
(b.) Press and hold the “Menu” key again with the OSD menu on the screen, the OSD  
menu will disappear. Then press the “Power” key 1 time while the menu key is still  
being pressed. The “Lock/Unlock” menu will appear for 3 seconds.  
(c.) Use the “Enter” key to select OSD or Power setting then set at “Lock” by pushing the  
“UP” or “Down” button.  
(d.) When the “UP” or “Down” button is released, the previous setting will be saved and  
exit the “Lock/Unlock” menu automatically.  
7. To Unlock the OSD / Power menu buttons, please follow the instructions below.  
(Please note: the monitor has to be turned ON with a valid signal preset)  
(a.) Press and hold the “Menu” key then press the “Power” key simultaneously, the “Lock/  
Unlock” menu will appear for 3 seconds.  
(b.) Use the “Enter” key to select OSD or Power setting then set at “Unlock” by pushing the  
“UP” or “Down” button.  
(c.) When the “UP” or “Down” button is released, the previous setting will be saved and exit  
the “Lock/Unlock” menu automatically.  
Please note:  
a. When the OSD Lock function is selected, this indicates that all the buttons except “power”  
button are now disabled.  
b. When the Power Lock function is selected, this indicates that the power key is disabled;  
user can not to turn off the monitor by “Power” key.  
12  
On-Screen Display Menus  
Main OSD Menu:  
ITEM  
CONTENT  
Contrast  
Brightness  
Auto Adjust  
Left/Right  
Up/Down  
The monitor luminance level control.  
The monitor backlight level control.  
Fine-tune the image to full screen automatically.  
Moving screen image horizontal position to left or right.  
Moving screen image vertical position to up or down.  
Horizontal size The screen image horizontal dot clock adjustment.  
Fine The screen image pixel phase adjustment.  
OSD Left/Right Moving OSD menu horizontal position to left or right.  
OSD Up/Down  
OSD Time out  
Moving OSD menu vertical position to up or down.  
OSD auto-disappear time selection.  
OSD menu language selection. ( English, French, Japanese, Deutsch,  
OSD Language  
Spanish, Italian, Traditional Chinese and Simplied Chinese)  
Factory Reset  
RGB  
Factory default value restored.  
Color temperature selection. (9300K, 6500K, 5500K, 7500K, User)  
13  
Appendix  
Troubleshooting  
If you are experiencing trouble with the LCD display, refer to the following. If the problem  
persists, please contact your local dealer or our service center.  
Problem: No image appears on screen.  
Check that all the I/O and power connectors are correctly and well connected  
described in the "Installation" section.  
Make sure the pins of the connectors are not crooked or broken.  
Problem: Partial Image or incorrectly displayed image.  
Check to see if the resolution of your computer is higher than that of the LCD  
display.  
Recongure the resolution of your computer to make it less than or equal to  
1280 x 1024.  
Problem: Image has vertical ickering line bars.  
Use "HORIZONTAL SIZE" to make an adjustment.  
Check and recongure the display mode of the vertical refresh rate of your  
graphic card to make it compatible with the LCD display.  
Problem: Image is unstable and ickering  
Use "FINE" to make an adjustment.  
Problem: Image is scrolling  
Check and make sure the VGA signal cable (or adapter) is securely connected.  
Check and recongure the display mode of the vertical refresh rate of your  
graphics card to make it compatible with the LCD display.  
Problem: Vague image (characters and graphics)  
Use “HORIZONTAL SIZE” to make an adjustment. If this problem still exists,  
use “FINE” to make an adjustment.  
14  
Warning Signal  
If you see warning messages on your LCD screen, this means that the LCD display cannot  
receive a clean signal from the computer graphics card.  
There may be three sources for this problem. Please check the cable connections or contact  
your local dealer or our service center for more information.  
No Signal  
This message means that the LCD display has been powered on but it cannot receive any  
signal from the computer graphics card. Check all the power switches, power cables, and  
VGA signal cable.  
Going to Sleep  
The LCD display is under the power saving mode. In addition, the LCD display will enter  
power saving mode when experiencing a sudden signal disconnecting problem.  
The monitor can be activated by pressing any keyboard, triggering the mouse or touching  
the screen.  
Out of Range  
This message means that the signal of the computer graphic card is not compatible with the  
LCD display. When the signal is not included in the "Video Modes" list we have listed in the  
Appendices of this manual, the LCD monitor will display this message.  
15  
Product Dimensions  
432.90  
429.60  
384.50  
63.40  
1.00  
Side View  
Front View  
100.00  
75.00  
Back View  
16  
Compatibility Modes  
Mode  
Resolution  
H-Frequency(khz)  
V-Frequency(hz)  
IBM VGA  
720X400  
31.47  
70  
IBM VGA  
Apple MacII  
VESA VGA  
VESA VGA  
VESA VGA  
VESA VGA  
VESA VGA  
VESA VGA  
Apple Mac  
640X480  
640X480  
640X480  
640X480  
800X600  
800X600  
800X600  
800X600  
832X624  
1024X768  
1024X768  
1024X768  
1280X1024  
1280X1024  
1152X864  
1280X960  
31.47  
35.00  
37.86  
37.50  
35.16  
37.88  
48.08  
46.88  
49.72  
48.36  
56.48  
60.02  
64.00  
80.00  
67.50  
60.00  
60  
66  
72  
75  
56  
60  
72  
75  
75  
60  
70  
75  
60  
75  
75  
60  
VESA XGA  
VESA XGA  
VESA XGA  
VESA SXGA  
VESA SXGA  
VESA SXGA  
VESA SXGA  
17  
Touch Screen Driver Installation  
The LA1950RTR / LA1950RTC / LA1950RTS is available with both RS232 and USB connections.  
The touch driver is available online for these operating systems: Windows® 7, VISTA 64/32 bits,  
XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux, Apple® Mac OS.  
Please Note: The LA1950RTR / LA1950RTC / LA1950RTS is Microsoft® Windows® HID  
(Human Interface Device) compatible if you use the USB touch screen interface. No additional  
software driver is required for general operation of the touch screen. A calibration tool can be  
installed for improved touch position accuracy. See “Optional Calibration Tool Install” section for  
more information.  
LA1950RTR / LA1950RTC / LA1950RTS Optional Calibration  
Tool Install:  
If you would like to use the Optional Calibration Tool, follow the instructions below. Please note:  
the calibration tool supports Windows® 7, VISTA, XP, XP Embedded, 2000, 98 and ME operating  
systems via USB only.  
1. Download the calibration tool online.  
2. Execute the calibration tool.  
3. From here the user can choose to do the following:  
a. 4 Points Calibration  
b. 9 Points Linearization  
c. 25 Points Linearization  
d. Clear  
e. Draw Test  
f. Advanced. In the Advanced settings area the user may do the following:  
i.  
Adjust the Double Click Area.  
ii.  
Enable auto right click and adjust the auto right click time.  
iii. Choose to be either in the HID Mouse Mode or HID Digitizer Mode  
(Windows® 7, Vista).  
iv. Simply click the “Apply” button once the settings are nalized.  
18  
LA1950RTR / LA1950RTC / LA1950RTS Install Instructions:  
If you are using a PC running Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0,  
follow the instructions below:  
1. Power on the PC.  
2. Be sure the USB or the RS-232 Serial cable is connected from the PC to the LCD display.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions as shown on the pop-up windows.  
If you are using a PC running Windows® XP Embedded, follow the  
instructions below:  
Express:  
1. Power on the computer.  
2. Make sure that the RS232 or USB cable is connected to the computer.  
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by  
using the EWF Manager command.  
4. Once the EWF is disabled, download the driver online and execute.  
5. Click on the XP driver and follow the step-by-step instructions as shown on the pop-up  
windows.  
Custom:  
1. Power on the computer.  
2. Make sure that the RS232 or USB cable is connected to the computer.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions found in the folder le of the driver.  
19  
If you are using a PC running Windows® CE, follow the instructions  
below:  
1. Power on the computer.  
2. Make sure that the RS232 or USB cable is connected to the computer.  
3. Using Platform Builder, build an image le by following the step-by-step instructions  
found in the folder le of the driver.  
If you are using a PC running Linux or Apple® Mac OS, follow the  
instructions below:  
1. Power on the computer.  
2. Make sure that the RS232 or USB cable is connected to the computer.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions found in the folder le of the driver.  
When changing the Touch Interface (RS-232 or USB), please follow  
instructions below.  
1. Uninstall the touch driver.  
2. Re-start the computer.  
3. Remove the original Touch Interface (RS-232 or USB).  
4. Connect the computer to the Touch Interface (RS-232 or USB) that you would like to use.  
5. Download the Touch Driver online, then follow the step-by-step instructions as show on  
monitor.  
PLEASE NOTE!  
Don’t plug in both the RS-232 and USB cables!  
Doing so may cause a driver conict, making your touch screen inoperable.  
20  
Product Registration and Technical Support  
Register Your Planar Products Today  
Thank you for choosing Planar. To assure you receive all the benets of your Planar product  
and services, register your Planar product today. Visit our website to register your product at  
Cables, Replacement Lamps, Accessories  
To nd cables, replacement lamps and accessories for your Planar projector, LCD monitor,  
touch screen or other Planar products visit our online store at www.PlanarOnline.com or  
nd other stores who carry Planar products at http://www.planar.com/howtobuy.  
Technical Support  
Visit Planar at http://www.planar.com/support for product registration, operations manuals,  
touch screen drivers, warranty information and access to Planar’s Technical Library for online  
troubleshooting.  
To speak with Planar Customer Support please have you model and serial number available  
and dial:  
Planar Support  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.  
Hours: 24 hours a day, 7 days a week.  
Toll or long distance charges may apply.  
21  
Planar Systems, Inc.  
Customer Service  
1195 NW Compton Drive  
Beaverton, OR 97006-1992  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the United States.  
Hours: 24 hours a day, 7 days a week  
© 2010 Planar Systems, Inc. 12/10 Planar is a registered trademark of Planar Systems, Inc.  
Other brands and names are the property of their respective owners.  
Technical information in this document is subject to change without notice.  
020-1061-00 Rev A  

Planar Systems Car Video System PLL2410W User Manual
Pioneer Car Stereo System DEH 434R User Manual
Pioneer AVH P5150DVD User Manual
Philips 21PT9457 User Manual
Patterson Kelley MACH 05 User Manual
Panasonic C9801W User Manual
Panasonic AJ SDX900p User Manual
Kenwood Car Stereo System KDC X497 User Manual
JVC LVT1942 002B User Manual
JVC GY HM70 User Manual