P300
INDEX
ELECTRIC CIRCUIT LEGEND
F
anti-interference filter
transformer 230Vac / 24 – 20 Vac 170VA
door safety switch
safety thermostat 145°C
boiler heating element 230V 1200W
espresso group heating element
ventilator
Technical characteristics ----------------------- 3
Installation---------------------------------------- 4
Operating ----------------------------------------- 7
Programmation----------------------------------- 8
frequent menu --------------------------- 8
set drinks --------------------------------- 9
set prices---------------------------------- 10
counters & amounts--------------------- 11
events ------------------------------------ 12
main menu ------------------------------- 14
set time-------------------------------- 15
payment system---------------------- 16
set temperature----------------------- 17
options -------------------------------- 18
1st level -------------------------- 19
TR
I.P.
CX
R.C.
R.G.
V
CV
flowmeter
PS
PC
MG
EV-A
MS5
MS4
MS3
MS2
MS1
soluble pump
espresso pump
espresso group motor
hot water Electro valve
doser motor soluble 5
doser motor soluble 4
doser motor soluble 3
doser motor soluble 2
doser motor soluble 1
“sugar in cup” doser motor
to the obliterator coil (24Vdc)
cup turret motor
cup releaser motor
coffee releaser coil
spoon releaser coil
soluble 4 & 5 electro valve
soluble 4 & 5 whipper
soluble 1 & 2 electro valve
soluble 1& 2 whipper
soluble 3 electro valve
soluble 3 whipper
MZ
EM-G
M-CB
M-SB
EM-C
EM-P
E-S4/5
F-S4/5
E-S1/2
F-S1/2
E-S3
F-S3
2nd level ------------------------- 20
set drinks ----------------------------- 23
quick functions -------------------------- 27
Troubleshooting guide -------------------------- 28
Hydraulic circuit--------------------------------- 29
Electrical diagram ------------------------------- 30
EV-C
M-M
espresso coffee electro valve
grinder motor
S
boiler temperature probe
“cup” position sensor
espresso group “normal” position sensor
“token” microswitch
S-PB
G.R.
GET
S-B
“cup” sensor
MB
cup-releaser motor
S-PE
S-PZ
M.B.
D.C.
V.A.
G.E.
“supply” position sensor
“sugar” position sensor
cup-releaser switch
coffee-doser switch
lack water switch (float)
espresso group “supply” position micro switch
Pag. 2
Pag. 31
ELECTRIC DIAGRAM
TECHNICAL CHARACTERISTICS
Dimensions: Height 162 cm
Width 48.5 cm
Depth 55 cm
Weight:
90 Kg
Voltage supply: 230 Vac. 50 Hz or 120 Vac. 60Hz on request
Absorbed power: 1,6 KW
Selections: n°14 for F300 model
n°28 for F306 model
Possibility to program up to 40 selections.
Payment system: predisposed for
•
•
•
Obliterator / token system 24Vdc
Parallel selector 12Vac or 24Vac
Executive / MDB system
Water connection: inside tank 15lit.
From water system with male fitting of ¾" (optional)
Cups capacity: up to 300
Stirrers capacity: up to 300
Optional:
•
•
•
•
connection kit to the water net
double pump
beniamino filter (anti-limestone filter)
whipper for powder container position 3 (mod. Plus)
Pag. 30
Pag. 3
HYDRAULIC CIRCUIT
INSTALLATION
Before proceeding to the operations of installation, maintenance and reparation of
the machine, read the manual carefully, where there is contained the necessary
information for the correct use of the machine.
Install the machine in a dry and not dusty place.
Put to level the machine through the regulation of the feet.
ELECTRIC CONNECTION
Before connecting the machine to the power, follow the following instructions:
o
o
check that the electric line has a suitable course for the absorbed power
(1600W)
check that the voltage corresponds to the data indicated in the plate on the left
side of the machine.
o
o
The power has to have the efficient earth connection..
In case of substitution of the cable of feeding, use only original cables (ask to
the manufacturer the special cable with type M connection)
The manufacturer will not take on any responsibility if these instruc-
tions are not respected.
All the electric devices in the machine work with a 24Vdc produced by the trans-
former except the boiler heating element and the same transformer, that use a ten-
sion of 230Vac or 120Vac on request.
Legend:
EV Inlet electrovalve
UC espresso group outlet
D
anti-limestone filtrer (optional)
U1 mixer 1 outlet
U2 mixer 2 outlet
U3 mixer 3 outlet
The main light switch is a bipolar type and it supplies all the machine.
VA water reservoir (optional)
CV flowmeter
PS
soluble pump
There are two fuses, 2A and 12A, which respectively protect the transformer and
the circuit in low voltage 24Vdc.
In case you have to extract the breakdown fuses, unscrew the hood container.
PC espresso pump
V
C
one-way valve
boiler
EV1 soluble 1 & 2 electrovalve
EV2 soluble 3 and hot water electrovalve
EV3 soluble 4 & 5 electrovalve
EvE espresso electrovalve
The 20Vac low-power circuit is interrupted by a safety button, situated on the
chassis, that cuts the current to the electronic board when the door is open.
M1 soluble 1 & 2 mixing group
M2 soluble 3 mixing group
M3 soluble 4 & 5 mixing group
GE espresso group
Extracting the button, it is possible to reestablish the feeding with the door open
(by only technical staff).
S
espresso waste electrovalve
Pag. 4
Pag. 29
HYDRAULIC CONNECTION
TROUBLESHOOTING GUIDE
INSIDE TANK
The machine is provided with a program of self-diagnosis, that allows to visualize
on the display the messages of breakdown or machine stopped :
The machine is already set for the inside tank working.
Message
Description
Probable cause
WATER SYSTEM CONNECTION (OPTIONAL)
during the cup-releasing, the board has not
received the change of state of the cup-releaser
micro switch.
Fuses, cup-releaser motor, cup-releaser micro
switch, electronic board.
ERR. CUP-RELEAS.
The electronic board has not received the “sugar Fuses, cup blocked in the cup-arm, cup-arm
ERROR ARM 0
•
disconnect the silicon pipe, which comes from the tank, from the limestone
filter.
position” of the cup -arm signal by the relative
sensor on the cup-station board.
motor, position sensor, electronic board.
•
•
connect the silicon pipe coming from the water resevoir to the filter.
connect the connector with the two grey wires coming from the water reser-
voir to the connector with two grey wires of the machine.
disconnect the wires of the float and connect the black and green wires com-
ing from the water reservoir to the black and green wires into the machine.
check that the net-system pressure doesn't overcome the 2 bars, otherwise it is
necessary to install a pressure reductor.
The electronic board has not received the “cup
position” of the cup -arm signal by the relative
sensor on the cup-station board.
Fuses, cup blocked in the cup-arm, cup-arm
motor, position sensor, electronic board.
ERROR ARM 1
The electronic board has not received the
“supply position” of the cup -arm signal by the
relative sensor on the cup-station board.
Fuses, cup blocked in the cup-arm, cup-arm
motor, position sensor, electronic board.
ERROR ARM 2
•
•
•
the coffee-group has not reached the “supply
position” given by its right micro switch.
Fuses, group right micro switch, group motor,
electronic board.
ERROR GROUP 1
ERROR GROUP 0
ERR. COFFEE FLOW
ERR. SOLUB.FLOW
ERROR GRINDER 1
LACK OF CUPS
Connect the water inlet tube to the inlet electrovalve with a ¾ " fitting.
the coffee-group has not reached the “normal
position” given by its left micro switch.
Fuses, group left micro switch, group motor,
electronic board.
During espresso supplying, the board has not
received signals from the flowmeter.
Fuses, too finer coffee, coffee pump, coffee
electro valve, flowmeter, electronic board.
During soluble supplying, the board has not
received signals from the flowmeter.
Fuses, solubile pump, solubile electro valve,
flowmeter, electronic board.
During the coffee grinding, the board has not
received the signal given by the doser-switch in
the maximum time of 25 seconds.
Too fine coffee, fuses, doser micro-switch,
grinder motor, grinder blocked by something
hard, electronic board.
The board doesn’t receive the signal from the
cups sensor.
Lack of cups, cups sensor, electronic board.
The board doesn’t receive the signal from the
float.
Lack of water, float, water container micro
switch, electronic board.
LACK OF WATER
ERROR BOILER 1
EMPTY GROUNDS!
ERROR EXECUTIVE
The board has not received the programmed
value temperature from the boiler probe in the
maximum time of 15 minutes.
Safety thermostat, boiler heating element,
electronic board.
The coffee grounds decounter has reached the
programmed value.
Empty the grounds and execute the quick
function nr.5.
At the power-on, the board has not received
signals by the payment payment, Executive or
MDB, programmed.
Payement system, cables, electronic board..
Pag. 28
Pag. 5
PRODUCTS LOADING
QUICK FUNCTIONS
Fill up the containers of the products as the labels on them.
In this section, it is possible to perform some of the most useful functions by the
operator.
CUPS LOADING
To access press the button “QUICK MENU” of the keyboard.
On display you will see “QUICK MENU”
Rotate the cup container towards left and open the cover slightly lifting it.
Load the cup columns, assuring that the two columns are jammed by the magnets.
Close the cover and insert again the container.
Pushing the relative number, you will execute these following functions::
STIRRERS LOADING
1. mixers washing: a washing for each mixing group is executed.
Load the container and position the stirrer’s weight above all of them to facilitate
also the expulsion of the last ones.
2. boiler 1 temperature visualization: you see for 2 seconds the present
temperature of the boiler 1.
3. boiler 2 temperature visualization: you see for 2 seconds the present
PAYMENT SYSTEM CONNECTION
temperature of the boiler 2.
•
•
•
VALIDATOR 12V: connect to the keyboard connector COIN12V (see figure).
VALIDATOR 24V: connect to the keyboard connector COIN12V (see figure).
EXECUTIVE / MDB: connect to the relative cables, positioned near the key-
board.
SINGLE IMPULSE SYSTEM (obliterator, token system, etc.): connect to the
6 pins connector in the back side of the machine.
4. free mode working: setting the “free mode” working. After 1 minute
of inactivity the machine comes back in regular working.
5. grounds counter reset: the coffee grounds counter is reset to the
value programmed on the “level 2 menu”. The message “empty
grounds !” will disappear and the machine will continue to work.
•
After the electric connection, it is necessary to set the used system into the pro-
gram (see page 16).
6. filter counter reset: the filter counter is reset to the value pro-
grammed in “level 2” menu. After that, the symbol “*” will disappear.
7. espresso group motor test: you can test the espresso group movement.
Pushing the button 7, you will supply the motor, while keeping
pressed it, the motor will move to the next position, “supply position”
or “normal position”.
KEYBOARD
8. coffee decounter reset: the coffee decounter is reset to the value pro-
PROG
grammed.
QUICK MENU
9. chocolate decounter reset: the chocolate decounter is reset to the value pro-
grammed.
0. total counter visualization: the display will show the total counter of the ma-
chine for 3 seconds. It is not possible to reset this counter.
Pag. 6
Pag. 27
Movements nr 38 and 39 (Decounter coffee and
chocolate)
OPERATING
After have followed all the instructions of installation, it is possible to turn on the
machine through the light switch situated on the rear side.
The movements nr38 (decounter coffee) and nr39 (decounter chocolate), where
inserted, decrease the relative decounter by a unit.
At the switch on of the machine, it appears on display for a brief time the message
of the version software, after that it will begin the heating of the boiler that will be
visualized with the message “HEATING” that will be replaced, to reached tem-
perature, by the flowing message “. ….INSERT THE CREDIT AND SELECT
YOUR DRINK…”.
To set the value of the decounter, it is enough to change it in one selection which
contains it, automatically it will be modified also in all the other selections.
If the parameter “type” is set=0, every time it is reset, see at page 22, the decoun-
ter restart to the set value, while if the parameter “type” is set=1, at every reset,
the decounter value will be the sum of the set value plus the value before the reset.
Note: it is advisable to execute a manual washing immediately after the
switch on, to load with more facility the hydraulic circuit and the boiler.
To do this, make reference to the “QUICK FUNCTIONS” at page 27.
Example with value= 100 and type=0
If the decounter is reset when its value was 20, the new decounter value is 100.
Example with value=100 and type=1
If the decounter is reset when its value was 20, the new decounter value is 120
(100+20).
Drink choice
The choice of the drink happens through the composition of a numerical code that
corresponds to the desired drink.
The codes and the relative associations can be varied in base to the demands of
the consumer.
In both of cases, when the decounter reaches 0, the display will show “Machine
ready coffee finished” or “Machine ready choco finished” or “Machine ready
No coffee&choco” and the machine will disable the selections which contains the
relative decounter (movements 38 and 39).
Sugar choice
The choice happens after the selection of the drink and within 5 seconds, through
the keys A and B; during the choice on display it will appear “CHOOSE
SUGAR” that it will disappear once selected.
The functions of the 2 keys and the supply by default of the sugar depend on the
setting of the parameter " Default Bitter Drink" described at page 20.
The quantities of the sugar are programmable for every single drink, while the
extra-sugar quantity is 50% more.
Change of language
It is possible to change the language of visualization among those present in the
version.
Pressing the key D, the language changes and it will be hold on for a maximum of
10 sec, after this time it will return to be that programmed by default.
This function is useful in those places where the users speak different languages
(airports, stations, etc)
Pag. 26
Pag. 7
26 TIME SOLUB.5
27 UNHOOK CUP
The machine makes the soluble 5 cycle with time control.
The cup-arm goes in “cup” position and the cup-dispenser (turrets
type) releases a cup”.
A cup searching (turrets type) happens.
A hot water quantity (in seconds) is supplied.
The machine makes the soluble 6 with volumetric control.
The machine makes the soluble 6 with time control.
The machine gives the soluble 4 ( coffee) powder (used for light
kinds of powder).
The machine gives a dose of sugar into the soluble 4 mixing group
and a quantity of water with volumetric control.
The machine gives a dose of sugar into the soluble 4 mixing group
and a quantity of water with time control.
The machine gives the soluble 5 ( coffee) powder (used for light
kinds of powder).
The machine gives a dose of sugar into the soluble 5 mixing group
and a quantity of water with volumetric control.
The machine gives a dose of sugar into the soluble 5 mixing group
and a quantity of water with time control.
the coffee decounter decreases by one unit.
the chocolate decounter decreases by one unit.
not used
PROGRAMMING
28 SEARCH CUP
29 ON TIME WATER
30 SOLUBLE 6
31 TIME SOLUBLE 6
32 LIOF. SOLUBLE 4
There are 2 levels of program: a frequent menu and a main menu
.
The frequent menu is useful to the operator to regulate the dosing of the drinks, to
set the prices, to notice the counters and to visualize the events of the machine.
33 LIOF. SOL4 SUG V.
34 LIOF. SOL4 SUG T.
35 LIOF. SOLUBLE 5
36 LIOF. SOL5 SUG V.
37 LIOF. SOL5 SUG T.
The main menu is useful to the technical sector of the management and is for set-
ting the various parameters of the machine.
The buttons used in the programming are the followings:
A (+) has the function of increase or advancement in the program
B (-) has the function of diminution or withdrawal in the program
C (esc) has the function of exit
38 COFFEE DECOUNTER
39 CHOCO DECOUNTER
40 J13-6 ON
D (enter) has the function of confirmation
41 J13-6 OFF
not used
42 J13-5 ON
not used
43 J13-5 OFF
not used
44 J13-6 ON
not used
45 J13-6 OFF
46 GRINDER 1
47 GRINDER 2
not used
FREQUENT MENU
the grinder 1 produces a dose of coffee with time control
the grinder 2 produces a dose of coffee with time control
The access to this menu happens through the key PROG of the keyboard.
On display the following menus will appear:
Note: some movements could not work, depending on the model of the machine.
Consult the manufacturer in case you want to modify the sequence of movements.
•
•
•
•
SET DRINKS
SET PRICES
COUNTERS & AMOUNTS
EVENTS
To scroll, use the buttons A (+) or B (-); to enter in the selected menu press D
(enter) while to exit press C (esc).
Pag. 8
Pag. 25
It is possible to eliminate, modify or insert movements or to change its regulations
where possible, for example the dosing of the products.
SET DRINKS
Entering the program through D, you will see the sequence of the existing drink
codes.
•
•
•
•
•
to move the selection cursor movement use A and B
to insert a new movement in the selected position press “2”
to eliminate the selected movement press “1”
to modify the selected movement press" 3"
11-12-13-14-15-1
Sel.11
to modify the regulations (es: dosing) to press D
To modify the name of the drink use the keys:
The flashing cursor points out the drink code selected, to move it use the keys A
to advance or B to withdraw; contemporarily to the movement of the cursor, in the
underlying line, the name of the selection will be visualized related to the drink
code.
“ 1” to withdraw with the cursor on the character to modify
“ 2” to advance with the cursor on the character to modify
“A” or “B” to modify the character
To modify the parameters of the drink code press D.
A sequence of numbers will be visualized that correspond to the doses of the se-
lection, to the line price (P) and to the menu of the name of the drink (MS).
The movements are the following:
01 CUP
the cup-arm goes in “cup” position and the cup-dispenser (single
type) releases a cup.
02 SUPPLY POSITION
03 SUGAR POSITION
04 GRINDER 1
the cup-arm goes in “supply” position.
the cup-arm goes in “sugar” position.
the grinder 1 produces a dose of coffee.
The machine makes the soluble 1 (milk) cycle with volumetric
control (in cc).
08-09-P1-MS
DOSE SUGAR
05 SOLUB 1 VOLUM.
06 SOLUB.2 VOLUM.
07 SOLUB.3 VOLUM.
The machine makes the soluble 2 (chocolate) cycle with volumet-
ric control (in cc).
The machine makes the soluble 3 (tea) cycle with volumetric
control (in cc).
the machine gives a dose of sugar in the cup.
the coffee dose is released into the infusion chamber and the
espresso supplying is executed.
As in precedence, the cursor points out the dosing code selected, therefore to
move it use the keys A or B; on the underlying line the description of the selected
dosing will appear.
To modify its value, after having selected it to press D.
08 SUGAR
09 ESPRESSO 1
10 SPOON
The machine gives a spoon.
A cup searching happens.
DOSE SUGAR
15
11 CUP POSITION
12 START POS. GROUP
13 SOLUB.4 VOLUM.
The espresso group is moved to the normal position.
The machine makes the soluble 4 (coffee) cycle with volumetric
control (in cc)..
The machine makes the soluble 5 cycle with volumetric control
(in cc)..
A hot water quantity (in cc) is supplied.
the grinder 2 produces a dose of coffee.
A pause is executed.
A pause is executed.
A pause is executed.
A pause is executed.
the coffee dose is released into the infusion chamber and the
espresso 2 supplying is executed.
Use the numerical keys from 0 to 9 to insert the desired value and to confirm
14 SOLUB.5 VOLUM.
pressing D.
To go out of the menu press C.
15 HOT WATER
16 GRINDER 2
17 PAUSE TYPE 1
18 PAUSE TYPE 2
19 PAUSE TYPE 3
20 PAUSE TYPE 4
21 ESPRESSO 2
SAVE CHANGES ?
YES=1
NO=3
Press" 1" to confirm the changes or" 3" to cancel it.
22 TIME SOLUB.1
23 TIME SOLUB.2
The machine makes the soluble 1 (milk) cycle with time control.
The machine makes the soluble 2 (chocolate) cycle with time
control.
24 TIME SOLUB.3
25 TIME SOLUB.4
The machine makes the soluble 3 (tea) cycle with time control.
The machine makes the soluble 4 (coffee) cycle with time control.
Pag. 24
Pag. 9
To modify the name of the drink use the keys:
SET DRINKS
" 1" to withdraw with the cursor on the character
" 2" to advance with the cursor on the character
"A" or" B" to modify the character
Premise: every selection or drink is composed by a sequence of movements which
correspond to a single operation of the machine.
The single movements are only performed after the correct event of the previous
movement, in case of incorrect operation the machine will go to alarm.
Example: change the water quantity of the coffee of the selection “ long coffee “
n°13
THE CORRECT SEQUENCE OF COMPOSITION OF THE SELECTIONS
IS ALREADY SET FROM THE MANUFACTURER, THEREFORE HE
RECOMMENDS YOU TO DO NOT MODIFY THE CORRECT SE-
QUENCE WITHOUT CONSULTING THE MANUFACTURER.
•
•
•
•
•
•
•
•
•
Enter in “ set drinks “ with D
Position the cursor on the code drink n°13 with the key A
Enter with D the sequence dosing
Position the cursor on the dosing n°9 with A
Press D to enter the change value
Use the numerical keys to set the desired value and press D to confirm it
Press C to go out of the menu “dosing drink”
Press “ 1” to confirm the changes
Entering the program through D you will see the sequence of the existing drink
codes.
11-12-13-14-15-1
Sel. 11
Press C to go out of the menu" set drinks"
The flashing cursor points out the code drink, to move it use the keys A to ad-
vance or B to withdraw; contemporarily to the cursor movement, in the underly-
ing line the name of the selection will be visualized related to the code drink.
To modify the parameters of the code drink, press D.
SET PRICES
A sequence of numbers will be visualized each of which corresponds to a move-
ment of the machine.
In this menu it is possible to set the value of 9 lines prices, to which the selections
are linked.
01-04-03-08-17-1
PRENDI BICCHIERE
To select the line price to set, use the keys A or B, enter the change of the value
pressing D and set the value with the numerical keys, after that press D to con-
firm.
As for the drinks, the cursor points out the code movement, therefore to move it
use the keys A or B; on the underlying line the description of the movement will
appear.
If all the prices values are 0, the machine will go automatically in “free mode”.
Every drink is composed therefore by a sequence of “movements”, by a line price
and by the menu of its name" MS."
Pag. 10
Pag. 23
BOILER 1 WORKING
COUNTERS & AMOUNTS
Enable of the boiler 1.
In this menu it is possible to notice the counters of the various selections and
eventually to reset them.
BOILER 2 WORKING
Enable of the boiler 2.
Press D to enter the menu that is composed in the following way:
Nota 1: to avoid the blocks in the mixing group, the software controls the powder
and water values in the way explained in the diagram.
TOTAL COUNTERS&AMOUNTS
total in normal working of counters and amounts (Pcs.) from the last zero
resetting. To reset, press" #" and" 3" to confirm.
TEST MODE: TOTAL COUNTERS&AMOUNTS
total in test working of counters and amounts (Pcs.). To reset, press" #"
and" 3" to confirm.
FREE MODE: COUNTERS&AMOUNTS
total in "free test" working of the done tests and of theirs "loss" in rela-
tionship to the price of the effected selections. To reset, press" #" and" 3"
to confirm.
OUTPUT LIST
Nr
DESCRIPTION
TOTAL IN PRICE-PERIOD 1
0.
1.
2.
3.
Soluble pump
Espresso pump
Espresso group motor
Cup-arm motor
Not used
total of the loss and of the counters in the working in period 1 of price.
To reset, press" #" and" 3" to confirm.
4.
5.
6.
7.
8.
Grinder motor
ETV espresso
ETV solub. 4
ETV solub. 3
ETV solub. 1 & 2
ETV solub. 5
TOTAL IN PRICE-PERIOD 2
total of the loss and of the counters in the working in period 2 of price.
To reset, press" #" and" 3" to confirm.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
RESET COUNTERS?
Stirrer releaser solenoid
Coffee-releaser solenoid
Not used
Zero resetting of all the counters. Press "1" to reset or "3" to cancel.
Not used
Cup-releaser motor
Column-releaser 1 solenoid
Column-releaser 2 solenoid
Not used
Not used
Not used
Not used
ETV water
Not used
Sugar motor
Solub. 1 motor
Solub.2 motor
Solub. 3 motor
Solub. 4 motor
Solub. 5 motor
Pag. 22
Pag. 11
SET FILTER COUNTER
Counter for the limestone filter substitution. Once reached, the machine
EVENTS
will show “*” on display but it will continue to work (see also at page 27).
In this menu it is possible to notice the last 100 events of the machine.
Entering the menu with D the following data will be visualized:
SET NUMBER OF COFFEE GROUNDS
Counter for coffee grounds emptying. Once reached, the machine will
show “EMPTY GROUNDS” and it will stop (see also at page 27).
DATA: time & date
ID:XX RESULT POS
REGULAR MODE COUNTERS&AMOUNTS
Regular mode counter. To reset it, press # and D.
In the line of the date, you see the time and date of the event.
ID indicates the kind of event, that can be a code drink or an internal operation of
the machine (see chart).
RESULT indicates if the event has gone to good end (GOOD) or an error is oc-
curred (Ennn) where nnn corresponds to a number that the type of error represents
(see chart).
TEST MODE COUNTERS&AMOUNTS
Test mode working counter. To reset it, press # and D.
FREE MODE COUNTERS&AMOUNTS
Free mode working counter. To reset it, press # and D.
POS indicates the position of the event (from 1 to 100).
To scroll the various events use the keys A and B.
TOTAL IN PRICE-PERIOD 1
Price-period 1 counter. To reset it, press “#” and D.
Internal operation codes
TOTAL IN PRICE-PERIOD 2
94 espresso group positioning
95 cups searching
Price-period 2 counter. To reset it, press “#” e D.
96 filter counter reached
97 boiler 1 refilling
98 boiler 2 refilling
99 washing
RESET COUNTERS&AMOUNTS
Reset of all the counters above. Press “1” to confirm or “3” to cancel.
ENABLE SLAVE MACHINE
Enable the “slave” machine.
Error codes
ENABLE TEMPERAT.ON DISPLAY:
Visualization of the boiler temperature on display .
E100
E101
E102
E103
E104
E105
E106
E107
E108
E109
E110
E111
E112
arm-cup positioning in “sugar position”
arm-cup positioning in “cup position”
arm-cup positioning in “supplying position”
espresso group positioning in “normal position”
espresso group positioning in “supply position”
espresso supplying
SERIAL NUMBER
Set the serial number of the machine.
CAUTION ! OUTPUT TEST !:
Test of all the electrical output of the electronic board (see the LIST at
page 22). Choose the output with A or B; to supply it, press D.
soluble supplying
coffee grinding (grinder 1)
coffee grinding (grinder 2)
sequence file
cup releasing
lack of cups
TYPE OF MACHINE
Set-up of the model of the machine.
lack of water
Pag. 12
Pag. 21
E113
E114
E115
E116
E117
E118
E119
E120
E121
boiler 1 temperature
boiler 2 temperature
coffee grounds counter
boiler 1 off by timer
boiler 2 off by timer
boiler 1 heating
“executive or MDB” communication during working
“executive or MDB” communication at power on
boiler 2 heating
OPTIONS: LEVEL 2 (manager- technician)
After have inserted the correct password, that it initially is "222", you will enter
the following menu:
MODIFY PASSWORD LEVEL 1
Insert the new password and press D to confirm.
MODIFY PASSWORD LEVEL 2
Insert the new password and press D to confirm.
SET DRINK
See ”set drinks” chapter at page 23.
LOAD DEFAULT DATA
Original data loading. To confirm press “1” while to cancel press “3”.
SET LANGUAGE
Language of all the message .
SET DELAY POWDER
Set the delay between the water and the powder, measured in cc if the
movement is “volumetric” or in tenth of seconds if it is by time (see note
1).
SET WATER QUEUE
Reserve of water without powder at the end of the selection, measured in
cc if the movement is “volumetric” or in tenth of seconds if it is by time
(see note 1).
SET PAUSE ESPRESSO GROUP
Time for coffee grounds drying, measured in tenth of seconds.
ENABLE BITTER DRINK AS DEFAULT
Kind of sugar / no sugar drink.
If ENABLE, the drink will be without sugar and the buttons A and B will
have the function of “sweet” and “extra sweet” respectively.
If DISABLED, the drink will be with sugar and the buttons A and B will
have the function of “no sugar” and “extra sweet” respectively.
Pag. 20
Pag. 13
MAIN MENU
OPTIONS: LEVEL 1 (operator)
After have inserted the correct password, which initially is "111”, the following
menu will appear:
To access this menu, keep pressed the button PROG for 5 seconds.
The menu is composed by the followings programs:
MODIFY PASSWORD LEVEL 1
Insert the new password and press D to confirm.
SET TIME
Setting of the clock and the schedules of some functions.
TEST MACHINE MODE
Set the machine in Test mode working.
PAYMENT SYSTEM
Setting of the system of payment and its options.
FREE MODE
Set the machine in Free mode working.
SET TEMPERATURE
Setting of temperatures and other functions on the boilers.
SINGLE DRINK COUNTERS&AMOUNTS
Choose the id drink to analyse with A or B and D to confirm.
OPTIONS: INSERT PASSWORD
Entry to the options related to the levels of programming: operator and
technician or manager.
REGULAR COUNTERS
Regular working counter. To reset it, press “#” and D.
TEST MODE COUNTERS&AMOUNTS
Test mode working counter. To reset it press “#” and D.
FREE MODE COUNTERS&AMOUNTS
Free mode working counter. To reset it press “#” and D.
TOTAL IN PRICE-PERIOD 1
Price-period 1 counter. To reset it, press “#” e D.
TOTAL IN PRICE-PERIOD 2
Price-period 2 counter. To reset it, press “#” e D.
RESET COUNTERS&AMOUNTS
Resetting all the counters above. Press “1” to confirm or “3” to cancel.
NOTE: these counters are the same of the “frequent menu” ones (see page 11).
Pag. 14
Pag. 19
OPTIONS
SET TIME
This menu is constituted by 2 different levels which are protected by a password:
To enter this menu, press D:
1st level: Operator - dedicated to the operator of the machine
SET DATE AND HOUR
2nd level: Management - dedicated to the technician / manager of the machine
Date and clock setting.
The access to the first level is also possible from the 2nd level.
TIMER ON/OFF BOILER 1
Set the period of inactivity of boiler 1.
The machine has 3 kinds of working which have different counters and amounts
of selections :
ENABLE TIMER ON/OFF BOILER 1
Enable the period of inactivity of boiler 1.
normal:
normal working with priced selection
test :
working with priced selections but with the money which doesn’t
go into the coin box (example: the technician has to test the ma-
chine and the payment system).
TIMER ON / OFF BOILER 2
Set the period of inactivity of boiler 2.
Free test:
working with free selections.
ENABLE TIMER ON /OFF BOILER 2
Enable the period of inactivity of boiler 2
Besides, where the price-periods are activated, there are the two counters of se-
lections and amounts.
AUTOMATIC WASHING 1
Set the time for automatic washing cycle 1.
The counters of every level are independent one with the other, therefore the zero
resetting of the counters of a level doesn't influence the counters of the other lev-
els.
ENABLE AUTOMATIC WASHING 1
Enable the automatic washing cycle 1.
AUTOMATIC WASHING 2
Set the time for automatic washing cycle 2.
ENABLE AUTOMATIC WASHING 2
Enable the automatic washing cycle 1.
To set the times, use the numerical buttons.
To enable the function, press A while to disable it use the button B.
To confirm press D, while to exit press C.
The settings of boiler 1 and 2 work if they are present ( make reference to the
model of the machine).
Pag. 18
Pag. 15
PAYMENT SYSTEM
SET TEMPERATURE
The followings programs compose this menu:
The followings programs compose this menu:
SET COIN VALUE PARALLEL SYSTEM
SET BOILER 1 TEMPERATURE
Setting of the coin values (see note 1).
Set-up of the boiler 1 temperature.
TIME 1ST PRICE PERIOD
SET BOILER 2 TEMPERATURE
Setting of the period 1 during which you can apply a discount.
Set-up of the boiler 2 temperature (if present).
1ST PRICE-PERIOD DISCOUNT
TIME OVERHEATING BOILER 1
Value of discount to apply to the period 1.
After this time of “machine stopped” the boiler 1 is overheated.
TIME 2ND PRICE PERIOD
SET OVERHEATING BOILER 1
Setting of the period 2 during which you can apply a discount.
Value of overheating of the boiler 1 (max. 5°C).
2ND PRICE-PERIOD DISCOUNT
TIME OVERHEATING BOILER 2
Value of discount to apply to the period 2.
After this time of “machine stopped” the boiler 2 is overheated.
DECIMAL POINT
SET OVERHEATING BOILER 2
Setting of the decimal point to be applied coin and prices to the values.
Value of overheating of the boiler 2.
NAME OF CURRENCY
TIME FILLING UP BOILER 1
Setting of the currency name.
Every “minute set” the pump refills the boiler 1 to keep the maximum
level.
SINGLE SALE NO CHANGE GIVEN
Setting of the sale without maintenance of the residual credit.
SET FILLING UP BOILER 1
Duration of refilling for boiler 1.
MAXIMUM CHANGE GIVEN
Maximum value of credit to be given (for MDB change-giver systems only).
TIME FILLING UP BOILER 2
Every “minute set” the pump refills the boiler 2 to keep the maximum
level.
TYPE OF PAYMENT SYSTEM
Type of payment system used on the machine (see note 2).
After have programmed the type of system of payment, it is necessary to go
out of the program with C and switch off the machine.
SET FILLING UP BOILER 2
Duration of refilling for boiler 2.
Note 1: this menu is only valid for parallel selectors.
To memorize the values coin proceed in the following way:
If the boiler 2 is not available, the relative settings will not work.
•
•
•
•
•
Set the value of the coin to accept with the numerical buttons
introduce the coin in the selector
if accepted, on the display the channel will appear on which is programmed
press D to confirm the memorization.
Repeat the procedure for the other coins.
Pag. 16
Pag. 17
|