ARTISAN™ BLENDER
INSTRUCTIES
ARTISAN™ BLENDER
INSTRUCTIONS
BLENDER/MIXEUR ARTISAN™
MODE D’EMPLOI
ARTISAN™ BLENDER/STANDMIXER
BEDIENUNGSANLEITUNG
FRULLATORE ARTISAN™
ISTRUZIONI PER L’USO
LICUADORA ARTISAN™
INSTRUCCIONES
ARTISAN™ MIXER
INSTRUKTIONER
ARTISAN™ BLENDER
BRUKSANVISNING
ARTISAN™-TEHOSEKOITIN
OHJEET
ARTISAN™ BLENDER
INSTRUKTIONER
LIQUIDIFICADOR ARTISAN™
INSTRUÇÕES
ARTISAN™ BLANDARI
LEIÐBEININGAR
ΜΠΛΕΝΤΕΡ ARTISAN™
OΔHΓIEΣ
Model 5KSB555
Blender
Blender Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either
the word “DANGER” or “WARNING.” These words mean:
You can be killed or seriously injured
if you don’t immediately follow
instructions.
DANGER
You can be killed or seriously injured
if you don’t follow instructions.
WARNING
All safety messages will tell you what the potential hazard is, tell you how to
reduce the chance of injury, and tell you what can happen if the instructions are
not followed.
Electrical Requirements
Volts: 220-240 Volts
Hertz: 50 Hz a.c.
WARNING
NOTE: This product is supplied with a
Y type power cord. If the power cord
is damaged, it must be replaced by the
manufacturer or its service agent in order
to avoid a hazard.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet
near the appliance.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire or electrical
shock.
1
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and/or injury to persons including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put Blender in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
5. Avoid contact with moving parts.
6. Do not operate the Blender with a damaged cord or plug or after appliance malfunctions,
or is dropped or damaged in any manner. Return appliance to the nearest Authorized
Service Center for examination, repair or electrical or mechanical adjustment.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter.
9. Keep hands and utensils out of container while blending to reduce the risk of
severe injury to persons or damage to the Blender. A scraper may be used but must
be used only when the Blender is not running.
10. Blade assembly is sharp. Handle carefully.
11. To reduce risk of injury, never put locking collar and blade assembly on the base
without having the pitcher properly attached.
12. Always operate Blender with cover in place.
13. The use of attachments, including canning jars, not recommended by KitchenAid
may cause a risk of injury to persons.
14. When blending hot liquids, remove center piece of two-piece cover.
15. This product is designed for household use only.
16. This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
17. Children should be supervised to ensure that they do not play with the appliance.
SAVE THESE INSTRUCTIONS
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
treated as household waste. Instead it
shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise
be caused by inappropriate waste handling
of this product.
Disposal must be carried out in
accordance with local environmental
regulations for waste disposal.
For more detailed information about
treatment, recovery and recycling of this
product, please contact your local city
office, your household waste disposal
service or the shop where you purchased
the product.
The symbol
on the product, or on
the documents accompanying the product,
indicates that this appliance may not be
2
Blender Features (Model 5KSB555)
Stay-Put Lid
with Clear, 60 ml
Ingredient Cup
Easy Pour
1,5 L Glass
Pitcher
Patented
Stainless
Steel Blade
Locking Collar and
Blade Assembly
Speed
Selection
Buttons
Durable
Steel-Reinforced
Couplers
Clean Touch
Control Pad
Die-Cast
Metal Base
WARNING: Flashing light indicates ready to operate. Do not touch blades.
3
Blender Features
This Blender was built and tested to
KitchenAid quality standards for optimum
performance and long, trouble-free life.
Durable Steel-Reinforced Couplers
Commercial-quality couplers with 12
interlocking teeth provide direct transfer of
motor power to the blade. Pitcher coupler
is coated for quiet operation.
Robust Motor
Rugged 0.9-horsepower motor supplies
the power for superb performance with
all blending tasks – from pureeing sauces
to making chunky salsas, or uniformly
crushing a pitcher of ice or frozen fruit
within seconds for silky smoothies.
Speed Selection Buttons
Create frozen drinks and puree sauces or
soups in seconds. Blend with confidence,
control, and consistency at all speed settings:
STIR (
), CHOP ( ), MIX ( ), PUREE ( ),
and LIQUEFY ( ). The PULSE ( ) mode
works with all five speeds. The CRUSH ICE
Easy Pour 1.5 L
Glass Pitcher
Glass Pitcher resists scratches,
stains and odors. Pitcher is
(
) feature is designed specifically for
crushing ice and will automatically pulse at
staggered intervals for optimal results.
removable from locking collar
for easy cleaning, and withstands a range
of extreme temperatures. Easy pour spout
provides smooth, drip-free pouring.
Intelli-Speed™ Motor Control
Exclusive Intelli-Speed™ control automatically
works to keep speed constant – even
through density changes when ingredients
are added. This advanced KitchenAid
design maintains an optimal blending
speed for each culinary task and control-
pad setting.
Stay-Put Lid with Clear, 60 ml
Ingredient Cup
Provides a strong seal. The flexible lid will
maintain its tight seal throughout the
life of the Blender. The lid incorporates a
removable 60 ml cup for convenience in
measuring and adding ingredients.
Soft Start Blending Feature
The Blender starts at a slower speed to
pull food into the blade then quickly
increases to selected speed setting. This
design feature reduces start-up kick and
allows hands-free operation.
Patented Stainless Steel Blade
Sharp oversized blade tines are positioned
on four different planes for fast, thorough,
and consistent blending.
Die-Cast Metal Base
Locking Collar and Blade Assembly
Durable, one-piece blade design is built
into the locking collar for easy handling
and cleaning. Dishwasher-safe assembly
keeps the blades from rotating until the
pitcher is properly attached to the collar
and put on the Blender base.
Heavy, die-cast metal base ensures stable,
quiet operation when blending a full
pitcher of ingredients. Four rubber feet
on wide, solid base provide a no-slip,
non-marring grip. Smooth and rounded,
the base is easy to clean and features
cord storage underneath.
Clean Touch Control Pad
Wipes clean in an instant. Smooth
control pad has no crevices or cracks to
trap ingredients.
4
Preparing the Blender for Use
3. Align the pitcher tabs with the slots of
Before First Use
the locking collar.
Before using your Blender for the first time,
wipe Blender base with a warm sudsy
cloth, then wipe clean with a damp cloth.
Dry with a soft cloth. Wash pitcher, lid,
locking collar and blade assembly, sealing
ring and ingredient cup in warm, sudsy
water (see Care and Cleaning, page 10).
Rinse parts and wipe dry.
Blender Assembly
1. Put locking collar with blade assembly
pointing up on a sturdy surface.
4. Press down and rotate pitcher
clockwise, approximately ¼ turn until
two clicks are heard.
5. Adjust the length of the Blender
power cord.
2. Put sealing ring, flat side down, around
the blades and into the groove within
the locking collar.
Sealing
Ring
6. Put pitcher assembly onto the
Blender base.
Locking
Collar
Continued on next page
5
Preparing the Blender for Use
NOTE: When properly positioned, pitcher
assembly will rest completely on Blender
base. If not, repeat steps 3 and 4.
WARNING
No
Gap
Gap
Electrical Shock Hazard
Plug into a grounded outlet.
Do not use an adapter.
7. Put lid on pitcher.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire or electrical
shock.
8. Plug power cord into a grounded
outlet. Blender is now ready for
operation.
9. Before removing the pitcher assembly
from the base, always press “O” and
unplug the power cord.
Using the Blender
1. With convenient one-step operation,
Before Use
this unit will operate only when a
speed selection button is pressed.
2. Before operating the Blender, make
sure the pitcher is properly secured
in the locking collar and assembly is
positioned on the Blender base.
NOTE: While the Blender is on or the
PULSE ( ) mode indicator light is blinking:
- Do not interfere with blade movement
- Do not remove pitcher lid
Operating the Blender
The KitchenAid™ Blender has five speeds:
STIR (
), CHOP ( ), MIX ( ),
PUREE ( ), and LIQUEFY ( ). In
addition, it also features CRUSH ICE (
and PULSE ( ) mode.
)
6
Using the Blender
NOTE: If a gap exists between the locking
CRUSH ICE
collar and the base, the pitcher might not
be locked into the locking collar or the
assembly is not positioned properly on the
Blender base. See Blender Assembly, page
5 for further instructions.
Your KitchenAid™ Blender offers a
CRUSH ICE ( ) feature. When selected,
the Blender will automatically pulse at
staggered intervals at the optimal speed
for crushing ice or other ingredients.
1. Before operating the Blender, make
sure the pitcher assembly is properly
positioned on the Blender base.
NOTE: If a gap exists between the locking
collar and the base, the pitcher might not
be locked into the locking collar or the
collar is not positioned properly on the
Blender base. See Blender Assembly, page
5 for further instructions.
No
Gap
Gap
2. Put ingredients into the pitcher and
firmly attach lid.
3. Press CRUSH ICE ( ). The indicator light
will stay lit. The Blender will automatically
pulse at staggered intervals.
3. Put ingredients in pitcher and firmly
attach lid.
4. Press the desired speed button for
continuous operation at that speed.
The green indicator light by the
selected speed will stay lit. You may
change settings without stopping the
unit by pressing a new speed button.
IMPORTANT: If blending hot foods or
liquids, remove the center ingredient
4. To turn off the CRUSH ICE ( ) feature,
press “O”. The Blender is now ready for
continuous operation.
5. Before removing the pitcher assembly,
unplug the power cord.
cup. Operate only on STIR (
)
speed.
5. To turn off the Blender, press “O”. The
“O” (OFF) button will stop any speed and
deactivate the Blender at the same time.
6. Before removing the pitcher assembly,
unplug the power cord.
Continued on next page
7
Using the Blender
indicator will return to blinking. To
PULSE Mode
pulse again or at another speed, simply
press and hold the button of the
desired speed.
Your KitchenAid™ Blender offers PULSE (
mode, which allows a “Pulse-at-any-
Speed” feature.
)
NOTE: PULSE ( ) mode will not work
with the CRUSH ICE ( ) feature.
1. Before operating the Blender, make
sure the pitcher assembly is properly
positioned on the Blender base.
NOTE: If a gap exists between the locking
collar and the base, the pitcher might not
be locked into the locking collar or the
collar is not positioned properly on the
Blender base. See Blender Assembly on
page 5 for further instructions.
2. Put ingredients into pitcher, and firmly
attach lid.
5. To turn off the PULSE ( ) mode
feature, press “O”. The Blender is now
ready for continuous operation.
6. Before removing the pitcher assembly,
unplug the power cord.
3. Press PULSE ( ). The indicator
light above the button will blink to
indicate that all five speeds are in the
PULSE ( ) mode.
Ingredient Cup
The 60 ml ingredient cup can
be used to measure and add
ingredients. Remove cup and
add ingredients at STIR (
), CHOP (
)
or MIX ( ), speeds. When operating at
higher speeds, with a full pitcher or with
hot contents, stop the Blender and then
add ingredients.
IMPORTANT: If blending hot foods or
liquids, remove the center ingredient
cup. Operate only on STIR (
)
speed.
4. Select a speed button. Press and hold
for the desired length of time. Both the
speed button and PULSE ( ) mode
indicators will stay lit when pulsing at
the selected speed. When button is
released, the blending will stop, but
the Blender will remain in PULSE (
mode and the PULSE ( ) mode
Soft Start Blending Feature
The Soft Start blending feature
automatically starts the Blender at a lower
speed to draw ingredients into the blades,
then quickly increases to the selected
speed for optimal performance.
)
NOTE: The Soft Start blending feature only
works when a speed is selected from the “O”
mode and does not work with the PULSE
(
) mode or CRUSH ICE ( ) features.
8
Speed Control Guide
Item
Speed
Item
Speed
Blended ice drink . . . . . . . . . . . . . . . .
Cheesecake. . . . . . . . . . . . . . . . . . . . .
Chopped fruits . . . . . . . . . . . . . . . .
Chopped vegetables . . . . . . . . . . .
Cream cheese-based spread . . . . . . . .
Cream soup . . . . . . . . . . . . . . . . . . . .
Crushed/chopped Ice . . . . . . . . . . . . .
Dip . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finely chopped fresh fruits . . . . . . . . .
Gravy . . . . . . . . . . . . . . . . . . . . . . . . .
Ice milk-based drink . . . . . . . . . . . . . .
Meat salad for
sandwich filling. . . . . . . . . . . . .
Mousse. . . . . . . . . . . . . . . . . . . . . . . .
Oatmeal . . . . . . . . . . . . . . . . . . . . . . .
Pancake batter . . . . . . . . . . . . . . . . . .
Pesto. . . . . . . . . . . . . . . . . . . . . . . . . .
Pureed fruit/Baby food . . . . . . . . . . . .
Pureed meat/Baby food meat . . . . . . .
Finely chopped
fresh vegetables . . . . . . . . . . . . . . .
Fluffy gelatin for pie/desserts. . . . . . . .
Pureed vegetables/Baby food
vegetables. . . . . . . . . . . . . . . . . . . .
Salad dressing. . . . . . . . . . . . . . . . . . .
Savory crumb topping . . . . . . . . .
Sherbet-based drink . . . . . . . . . . . . . .
Smooth ricotta or
cottage cheese . . . . . . . . . . . . . . . .
Streusel topping . . . . . . . . . . . . . . . . .
Sweet crumb topping. . . . . . . . . .
Sweet crunch topping. . . . . . . . . .
Vegetable-based main dish sauce . . . .
Waffle batter . . . . . . . . . . . . . . . . . . .
White sauce . . . . . . . . . . . . . . . . . . . .
Frozen chopped fruit
(defrost slightly until it
can be probed with a
knife tip) . . . . . . . . . . . . . . . . . . . . .
Frozen yogurt-based drink . . . . . . . . .
Fruit juice from
frozen concentrate . . . . . . . . . . . . .
Fruit-based drink (thin) . . . . . . . . . . . .
Fruit-based drink (thick) . . . . . . . . . . .
Fruit-based sauce . . . . . . . . . . . . . . . .
Grated hard cheese. . . . . . . . . . . . . . .
Tip - Process up to one standard ice cube tray or 12 to 14 standard ice cubes at a time.
Occasional stirring with a spatula will be helpful only when Blender is “O”. The CRUSH
ICE ( ) feature has been optimized to crush and chop ice without adding any liquid
ingredients.
9
Care and Cleaning
The Blender pitcher, locking collar and
To Clean Without Disassembly
blade assembly can be easily cleaned as
individual components or together without
disassembly.
• Clean the Blender thoroughly after
every use
• Do not immerse the Blender base or
cord in water
• Do not use abrasive cleansers or
scouring pads
1. Put the pitcher on the Blender base,
fill half full with warm (not hot) water,
and add 1 or 2 drops of dishwashing
liquid. Put the lid on the pitcher, press
the STIR speed setting, and run the
Blender for 5 to 10 seconds. Remove
the pitcher and empty contents. Rinse
with warm water until clean.
2. To clean the lid and ingredient cup,
wash in warm soapy water, then rinse
and dry thoroughly.
To Clean Individual Components
1. Lift the pitcher assembly in a straight,
upwards motion off the Blender base.
Place jar assembly on a hard surface.
Then, while holding locking collar,
rotate pitcher counterclockwise, two
clicks, to separate locking collar and
blade assembly, and sealing ring from
the pitcher. Wash components with
soapy water. Rinse and wipe dry.
NOTE: Pitcher can be placed in the
bottom rack of an automatic dishwasher.
For best results, hand washing is
recommended for the lid, ingredient cup,
locking collar and blade assembly, and
sealing ring.
3. Wipe the Blender base and cord with
a warm, sudsy cloth; wipe clean with a
damp cloth, and dry with a soft cloth.
Pitcher
Sealing
Ring
Locking
Collar
and Blade
Assembly
2. Wipe the Blender base and cord with
a warm, sudsy cloth; wipe clean with a
damp cloth, and dry with a soft cloth.
10
Troubleshooting
The Blender does not operate when a setting is selected:
Check to see if the Blender is plugged
into an outlet. If it is, press “O”, then
unplug the Blender. Plug it back in to the
same outlet. If the Blender still does not
work, check the fuse or circuit breaker
on the electrical circuit the Blender is
connected to and make sure the circuit
is closed.
No indicator lights are lit.
The Blender stops while blending:
The Blender may be overloaded. If the
Blender becomes overloaded when
blending heavy ingredients, it will
automatically shut off to prevent damage
to the motor. Press “O” to reset the Blender
and unplug the power cord. Remove the
pitcher assembly from the base and divide
contents into smaller batches. Adding
liquid to the pitcher may also reduce the
load on the Blender.
All indicator lights are flashing
at the same time.
The Blender may be jammed. If it’s
jammed, the Blender will stop running
to prevent damage to the motor. Press
“O” to reset the Blender and unplug
the power cord. Remove the pitcher
assembly from the base and with a
scraper, free the blades by breaking-up or
removing the contents at the bottom of
the pitcher.
Indicator lights are flashing alternately.
The Blender turns on, but blades will not rotate.
The pitcher is not properly secured in
the locking collar, not allowing couplers
to engage. Remove pitcher from base
and fully seat into collar. Press down and
rotate pitcher clockwise in the locking
collar past the second “click.” This will
allow the pitcher assembly to engage the
coupler. See page 5 for Blender Assembly.
Gap
If the problem cannot be fixed with the steps provided in this section, then contact an
authorized service center (see page 14).
Do not return the Blender to the retailer – they do not provide service.
11
Blender Tips
Quick Tips
How To ...
• In order to produce a smoother texture,
blend with CRUSH ICE ( ) if you’re
making beverages using ice.
• Smaller ice cubes can be chopped or
crushed faster than large ones.
• Add food to this Blender pitcher in
larger quantities than you would with
other blenders – you can add 2 to
3 cups (475 to 710 ml) at a time versus
1 cup (235 ml) portions.
• For many ingredient mixtures, start the
blending process at STIR ( ) to
thoroughly combine the ingredients. Then
increase to a higher speed, if necessary.
• Be sure to keep lid on pitcher while
blending.
• If desired, remove center ingredient cup
of pitcher lid to add liquids or ice cubes
while the Blender is operating at STIR ( ),
CHOP ( ) or MIX ( ) speeds.
• When operating at higher speeds with
a full pitcher or with hot contents, stop
the Blender and then add ingredients.
• Stop the Blender before using utensils
in the pitcher. Use a rubber spatula to
mix ingredients only when the Blender
is “O”. Never use any utensil, including
spatulas, in the pitcher while the motor
is running.
• Cool hot foods, if possible, before
blending. Begin blending warm foods
at STIR ( ). Increase to higher speed,
if necessary.
• Remove center ingredient cup when
blending hot liquids and operate
Reconstitute frozen juice: For a 175 ml
can of orange juice concentrate, combine
the juice and correct amount of water in
the pitcher. Cover and blend at MIX (
until thoroughly combined, about 10 to
15 seconds.
)
For a 355 ml can, combine the juice
and 1 can of water in the pitcher. Cover
and blend at MIX ( ) until thoroughly
combined, about 20 to 30 seconds. Stir in
remaining 2 cans of water.
Dissolve flavored gelatin: Pour boiling
water into the pitcher; add gelatin. Remove
center ingredient cup and blend at STIR (
until gelatin is dissolved, about 10 to 30
seconds. Add other ingredients.
)
Make cookie and graham cracker
crumbs: Break larger cookies into pieces
about 4 cm in diameter. Use smaller cookies
as-is. Place in pitcher. In PULSE ( ) mode,
cover and blend at CHOP ( ), pulsing a
few times, about 3 seconds each time,
until desired consistency is reached. Use
the crumbs to make a quick topping for
frozen yogurt, pudding, or a fruit compote.
To make a finer crumb for pie and dessert
crusts, break graham crackers or cookies
into pieces about 4 cm in diameter and
place in the pitcher. In PULSE ( ) mode,
cover and blend at LIQUEFY ( ), pulsing
a few times until desired consistency is
reached, about 20 to 30 seconds.
Make cracker crumbs: Follow procedure
only on STIR ( ). Do not place bare for cookies. Use as a topping or as an
hand on pitcher lid when processing ingredient in main dish casseroles and
hot liquids.
vegetable dishes.
• Stop and check the consistency of foods
after a few seconds to prevent
over-processing.
Make bread crumbs: Tear bread into
pieces about 4 cm in diameter. Follow
procedure for cookies. Use as a topping
or as an ingredient in main dish casseroles
and vegetable dishes.
12
Blender Tips
Chop fruits and vegetables: Put 2 cups
Combine flour and liquid for
(475 ml) of fruit or vegetable chunks in
pitcher. In PULSE ( ) mode, cover and blend
at STIR ( ), pulsing a few times, about
2 to 3 seconds each time, until desired
consistency is reached.
thickening: Place flour and liquid in
pitcher. Cover and blend at STIR ( ) until
smooth, about 5 to 10 seconds.
Prepare white sauce: Place milk, flour,
and salt, if desired, in pitcher. Cover, and
blend at STIR ( ) until well-mixed, about
5 to 10 seconds. Pour into saucepan and
cook as usual.
Puree fruits: Place 2 cups (475 ml) canned
or cooked fruit in pitcher. Add 2 to 4
tablespoons (30 to 60 ml) fruit juice or
water per cup (240 ml) of fruit. Cover and
blend at PUREE ( ) about 5 to 10 seconds.
Prepare pancake or waffle batter
from mix: Place mix and other ingredients
Puree vegetables: Place 2 cups (475 ml)
canned or cooked vegetables in pitcher. Add until well-mixed, 10 to 20 seconds. Stop
in pitcher. Cover and blend at MIX (
)
2 to 4 tablespoons (30 to 60 ml) broth,
water, or milk per cup (240 ml) of
vegetables. Cover and blend at PUREE (
about 10 to 20 seconds.
the Blender and scrape sides of the pitcher
as needed.
)
Grate cheese: Cut very cold cheese into
1,5 cm cubes. Place up to 1/2 cup (120 ml)
cheese in the pitcher. Cover, and blend at
LIQUEFY ( ) about 5 to 10 seconds.
For hard cheeses, such as Parmesan,
bring to room temperature, then blend
at LIQUEFY ( ) for 10 to 15 seconds.
Puree meats: Place cooked, cubed,
tender meat in pitcher. Add 3 to 4
tablespoons (45 to 60 ml) broth, water,
or milk per cup (240 ml) of meat. Cover
and blend on STIR ( ) 10 seconds. Stop
the Blender and scrape sides of pitcher.
Cover and blend on PUREE ( ) 10 to 20
seconds longer.
Make oatmeal for a baby: Place uncooked
rolled oats in pitcher. In PULSE ( ) mode,
blend at MIX ( ) until desired consistency,
about 5 pulses, 2 to 3 seconds each pulse.
Cook as usual.
Puree cottage cheese or ricotta
cheese: Place cottage cheese or ricotta
cheese in pitcher. Cover and blend at
MIX ( ) until smooth, about 25 to 35
seconds. Stop the Blender and scrape sides
as needed. If necessary, add 1 tablespoon
(15 ml) of skim milk per cup (240 ml) of
cottage cheese. Use as a base for low-fat
dips and spreads.
Make baby food from adult food:
Place prepared adult food in pitcher.
Cover and blend at STIR ( ) about 10
seconds. Then blend at PUREE (
about 10 to 30 seconds.
)
Rinse your Blender Pitcher: Fill pitcher
one-half full with warm water. Add a few
drops of dishwashing liquid. Cover and
blend at STIR ( ) until sides are clean,
about 5 to 10 seconds. Rinse and dry.
For complete cleaning, pitcher can also
be cleaned in an automatic dishwasher.
For best results, hand washing is
recommended for the lid, ingredient cup,
locking collar and blade assembly, and
sealing ring. Refer to Care and Cleaning,
page 10.
Combine liquid ingredients for baked
goods: Pour liquid ingredients in pitcher.
Cover and blend at LIQUEFY ( ) until well-
mixed, about 10 to 15 seconds. Pour liquid
mixture over dry ingredients and stir well.
Take lumps out of gravy: If sauce or
gravy becomes lumpy, place in the pitcher.
Cover and blend at MIX ( ) until smooth,
about 5 to 10 seconds.
13
™
Household KitchenAid
Blender Warranty
Length of
Warranty:
KitchenAid
Will Pay For:
KitchenAid
Will Not Pay For:
Europe, Australia and
New Zealand:
Three years Full Warranty
from date of purchase.
Replacement parts and
repair labor costs to
correct defects in materials
or workmanship. Service
must be provided by an
Authorized KitchenAid
Service Center.
A. Repairs when Blender
is used for operations
other than normal
household food
preparation.
Other:
One Year Full Warranty
from date of purchase.
B. Damage resulting
from accident,
alterations, misuse,
abuse, or installation/
operation not in
accordance with local
electrical codes.
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR INDIRECT DAMAGES.
Service Centers
All service should be handled locally by
an Authorized KitchenAid Service Center.
Contact the dealer from whom the unit
was purchased to obtain the name of the
nearest Authorized KitchenAid Service
Center.
In the U.K.:
Call: 0845 6011 287
In Ireland:
M.X. ELECTRIC
Service Department
25 Alymer Crescent
Kilcock, CO.KILDARE
Call: 1 679 2398/87 2581574
Fax: 1 628 4368
In Australia:
Call: 1800 990 990
In New Zealand:
Call: 0800 881 200
14
Customer Service
For U.K. & Northern Ireland:
Freephone helpline number on:
0800 988 1266
(calls from mobiles are charged
at your standard network rate)
For Southern Ireland:
Helpline number on:
+44 (0) 20 8616 5148
Address:
KitchenAid Europa, Inc.
PO BOX 19
B-2018 ANTWERP 11
BELGIUM
® Registered Trademark of KitchenAid, U.S.A.
™ Trademark of KitchenAid, U.S.A.
© 2009. All rights reserved.
Specifications subject to change without notice.
W10236556A
(6707AdZw709)
15
16
|