JVC Camcorder GY HM70U User Manual

LYT2647-001A-M  
EN  
Basic User Guide  
HD MEMORY CARD CAMERA RECORDER  
GY-HM70U  
* This illustration shows the GY-HM70U with an optional microphone.  
For detailed operating instructions, refer to the “Detailed User Guide” in  
.
Verifying the Accessories  
AC Adapter  
AP-V20U  
(1.9 m)  
Battery Pack  
BN-VF823U  
(x1)  
AV Cable  
(1 m)  
USB Cable  
CD-ROM  
Basic User Guide  
(this manual)  
(Type A - Mini Type B)  
(1 m)  
Dear Customers  
For Future Reference:  
Thank you for purchasing this JVC product.  
Before use, please read the Safety Precautions  
safe use of this product.  
Enter the Model No. (located on the bottom of  
the camera) and Serial No.  
(located on the bottom of the camera) below.  
Model No.  
Serial No.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
Remember that this unit is intended for  
private consumer use only.  
2. Keep these instructions.  
Any commercial use without proper permission  
is prohibited. (Even if you record an event such  
as a show, performance or exhibition for personal  
enjoyment, it is strongly recommended that you  
obtain permission beforehand.)  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
Trademarks  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifi ers) that produce heat.  
9. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
AVCHD Progressive/AVCHD and the AVCHD  
Progressive/AVCHD logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
x.v.Color™ is a trademark of  
Sony Corporation.  
HDMI (High-Definition Multimedia Interface) and  
HDMI logo are either registered trademarks or  
trademarks of HDMI Licensing, LLC in the  
United States and/or other  
10. Only use attachments/accessories specifi ed by  
the manufacturer.  
countries.  
Manufactured under license from Dolby  
11. Use only with the cart,  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
stand, tripod, bracket,  
or table specifi ed by  
SDXC and SDHC logos are trademarks of  
the manufacturer, or  
SD-3C, LLC.  
sold with the apparatus.  
®
Windows is either registered trademark or  
When a cart is used,  
trademark of Microsoft Corporation in the  
United States and/or other countries.  
use caution when  
moving the cart/  
Macintosh is a registered trademark of Apple Inc.  
apparatus combination  
iMovie and iPhoto are trademarks of Apple Inc.,  
to avoid injury from tip-over.  
registered in the U.S. and other countries.  
12. Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
13. Refer all servicing to qualifi ed service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture,  
does not operate normally, or has been dropped.  
Intel, Intel Core, and Pentium are trademarks or  
registered trademarks of Intel Corporation or its  
subsidiaries in the United States and other countries.  
Other product and company names included in  
this instruction manual are trademarks and/or  
registered trademarks of their respective holders.  
Marks such as ™ and ® have been omitted in this  
manual.  
When using the AC adapter in areas other  
than the USA  
If this symbol is shown, it is only valid  
in the European Union.  
The provided AC adapter features automatic  
voltage selection in the AC range from 110 V to 240 V.  
USING HOUSEHOLD AC PLUG ADAPTER  
In case of connecting the unit’s power cord to  
an AC wall outlet other than American National  
Standard C73 series type use an AC plug  
adapter, called a “Siemens Plug”, as shown.  
For this AC plug adapter, consult your nearest  
This product is licensed under the AVC Patent  
Portfolio License for the personal use of a  
consumer or other uses in which it does not receive  
remuneration to  
(i) encode video in compliance with the AVC  
standard (“AVC Video”) and/or  
JVC dealer.  
Plug Adapter  
(ii) decode AVC Video that was encoded by a  
consumer engaged in a personal activity and/or  
was obtained from a video provider licensed to  
provide AVC Video. No license is granted or shall  
be implied for any other use. Additional information  
may be obtained from MPEG LA, L.L.C.  
Remove the AC adapter from the AC wall outlet  
when not in use.  
Do not leave dust or metal objects adhered to  
the AC wall outlet or AC adapter (power/DC plug).  
Be sure to use the supplied AC adapter.  
Do not use the supplied AC adapter with other  
devices.  
.
3
Table of Contents  
Playback  
Copying  
Getting Started  
Other Problems  
Recording  
Viewing the Detailed User Guide  
Insert the supplied CD-ROM into your PC.  
Double-click the CD-ROM icon in “Computer” or “My Computer”.  
Click the “GY-HM70U_manual” folder.  
Detailed User Guides in PDF files are displayed.  
.
A
B
C
0
Memo  
Adobe Acrobat Reader version 5 or higher or Adobe Reader is required to view the  
PDF file.  
4
 
Names of Parts and Functions  
r s  
t u v  
w
1 2 3 45  
7
890  
6
x
y
d
c
b
e
fghi  
z
A
REMOTE  
AV  
E
F
D
a
GHI  
B
C
DC  
j klmnopq  
.
* Microphone is optional.  
X
“WHT BAL” White balance selection  
button  
“SHUTTER” Shutter speed button  
“IRIS” Iris button  
A
Tally lamp  
Built-in microphone  
Microphone holder  
Shoe  
“REC” (Record) button  
Zoom lever  
Viewfinder  
Eyepiece  
Eyepiece focus lever  
Built-in speaker  
Lens/Lens cover  
“DOOR LOCK” lever  
SD card slot A, B  
LCD monitor  
Tripod mounting holes  
“AF/MF” Focus switch  
Y
Z
a
b
c
d
e
B
C
D
“AE±” Exposure button  
E
“BATT. 1” charge indicating lamp  
“BATT. 2” charge indicating lamp  
“REC” (Record) button  
F
G
H
“STANDBY/ON OFF”/“CAM/MEDIA”  
Power/Operation mode selection switch  
I
f
“SNAPSHOT” (Still image recording)  
button  
Zoom lever  
“BATT. 1” lock release button  
“BATT. 2” lock release button  
Headphone jack  
“REMOTE” Remote jack  
“AV” connector  
“DC” connector  
“MIC” jack  
USB connector  
HDMI connector  
J
K
g
h
i
j
k
l
m
n
o
p
q
r
s
L
M
N
O
P
Q
i.AUTO (Intelligent Auto) button  
MODE (Video/Still image) button  
“CAM”/“MEDIA” button  
Lens cover switch  
Focus ring  
“ADJ.” dial  
R
S
T
U
“MEDIA” Media mode indicating lamp  
“CAM” Camera mode indicating lamp  
“ACCESS” Access indicating lamp  
V
W
“SET” button  
5
 
Names of Buttons and Functions on the  
LCD Monitor  
The following screens are displayed during Playback Screen (Video)  
the video and still image modes, and  
1
operate as the touch screens.  
0:01:23  
0:12:34  
Recording Screen (Video/Still Image)  
6
6
1
2
CAM  
MENU  
5
2
3
4
5
.
A
B
C
A/B (Video (60i/60p)/Still Image) Mode  
REC  
MENU  
MEDIA  
Button  
Camera Mode Button  
3
4
.
Switches the camera (recording) mode.  
Index Screen (Thumbnail Display)  
Button  
A
B
C
A/B (Video (60i/60p)/Still Image) Mode  
Button  
Media Mode Button  
D
E
F
Delete Button  
Menu Button  
Operation Buttons  
Switches to the media (playback) mode.  
Recording Start/Stop Button  
6
:
Video Recording Start Button  
Video Recording Stop Button  
Still Image Recording Button  
7
:
Playback Screen (Still Image)  
:
Q
D
E
Menu Button  
Display Button  
Simple display: Some displays  
disappear after approximately 3  
seconds.  
B
1
2
CAM  
MENU  
Full display: Displays everything.  
Switches the display between full and  
simple with every tap of the button.  
C/H (Intelligent Auto/Manual) Button  
3
4
5
6
.
F
A
A/B (Video (60i/60p)/Still Image) Mode  
Button  
B
C
Operation Buttons  
Camera Mode Button  
Switches the camera (recording) mode.  
Index Screen (Thumbnail Display)  
Button  
Delete Button  
Menu Button  
D
E
F
6
 
Index Screen (Thumbnail Display)  
Menu screen (recording mode)  
0
9
1
2
1
2
3
OFF  
8
7
8
CAM  
3
4
5
6
7
5
6
4
.
.
A
A
B
C
D
E
F
G
H
I
J
A/B (Video (60i/60p)/Still Image) Mode  
RECORD SETTING Menu  
Shortcut Menu  
Button  
B
C
Date Button  
Camera Mode Button  
CONNECTION SETTINGS Menu  
Help Button  
Switches the camera (recording) mode.  
Still Image Mode Button (Still image  
only)  
SILENT Button  
D
INFO. Button  
Close Button  
E
F
Delete Button  
MEDIA SETTINGS Menu  
SETUP Menu  
Playback Media Button  
Switches between the SD card slots.  
SPECIAL RECORDING Menu  
G
H
Menu Button  
Page Forward/Back Button  
Using the Icon Buttons/Thumbnails  
There are two ways to operate the touch screen, namely “tap” and “drag”. The following  
are some examples.  
A
Tap the displayed button (icon) or thumbnail (file) on the touch screen to make selection.  
B Drag the thumbnails on the touch screen to search for the desired file.  
Recording Screen Playback Screen Index Screen  
0:01:23  
0:12:34  
MENU  
CAM  
MEDIA  
REC  
MENU  
CAM  
.
Memo  
0
The touch screen of this unit is pressure-sensitive. When the touch screen does  
not respond smoothly, apply slightly more force to your fingertip.  
Do not press or rub with excessive force.  
0
0
0
0
Do not operate the touch screen using an object with a sharp tip.  
Pressing two or more places at a time may cause a malfunction.  
Tap the buttons (icons) on the touch screen accurately. The buttons may not  
respond if they are not tapped on the right area.  
0
Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is  
misaligned with the touched area.  
7
 
Charging the Battery Pack  
Set the “STANDBY/ON  
Connect the DC connector and  
OFF” switch to “OFF”.  
plug in the power.  
TT.1  
BATT.2  
Charging Lamp1, 2  
REMOTE  
Charging in progress:  
AV  
Blinks  
Charging finished:  
Goes out  
Attach the battery pack.  
DC  
Align the terminal of the  
battery pack with this unit.  
Either BATT.1 or BATT.2 can be charged.  
If two battery packs are attached, BATT.1 is charged first. After the charging of  
BATT.1 is completed, BATT.2 is charged. However, if BATT.1 is attached while  
BATT.2 is being charged, BATT.1 will be charged after the charging of BATT.2 is  
completed. Both battery packs cannot be charged at the same time.  
.
0
0
The battery pack is not charged at the time of purchase.  
To detach the battery pack, press the battery lock release button, and slide the battery  
pack out of this unit.  
.
8
   
Caution  
Be sure to use JVC battery packs.  
0
If you use any other battery packs besides JVC battery packs, safety and  
performance cannot be guaranteed.  
0
If malfunctions (overcurrent, overvoltage, transmission error, etc) occur, or if any  
battery manufactured other than JVC is attempted for battery charge, charging  
stops. In these cases, the CHARGE lamp blinks quickly for notification.  
You can record or play back videos while the AC adapter is connected. (Battery  
charging cannot be performed during recording or playback.)  
Remove the battery when the unit is to be used for a long time. Performance  
of the battery may drop if it is left attached to the unit.  
0
0
0
Charging time: Approx. 3 h 30 m (using supplied battery pack)  
The charging time is when the unit is used at 25°C (77°F). If the battery pack is  
charged outside the room temperature range of 10°C to 35°C (50°F to 95°F),  
charging may take a longer time or it may not start. CHARGE lamp blinks 2 times  
in a slow cycle for notification if the battery charge does not start. Also, please  
note that the recordable and playable time may be shortened under some usage  
conditions, such as at low temperature.  
0
You can use this unit even if only one battery pack is attached.  
Grip Belt Adjustment  
Pad  
Adjust the length of the belt  
Pull back the Pad  
Attach the Pad  
.
9
 
Inserting an SD Card  
Insert a commercially available SD card before recording.  
This unit comes with two SD card slots. When two SD cards are inserted and “SEAMLESS  
RECORDING” in the “RECORD SETTING” menu is set to “ON”, recordings can be  
continued on the other card even if one card is full or error occurs on one card.  
Set the “STANDBY/ON  
OFF” switch to “OFF”.  
Open the door.  
Slide the “DOOR LOCK” lever to  
the left, and pull the door  
towards you.  
Insert an SD card into slot A.  
Label  
Close the door.  
After closing the door, slide the  
“DOOR LOCK” lever to the right  
to lock the door.  
Turn off the power of this unit before  
inserting or removing a SD card.  
.
o To remove the card  
Push the card inward once, then pull it out straight.  
Memo  
Operations are confirmed on the following SD cards.  
Manufacturer  
Video A  
Panasonic, TOSHIBA, SanDisk  
Class 4 or higher compatible SD card (2 GB)/  
Class 4 or higher compatible SDHC card (4 GB to 32 GB)/  
Class 4 or higher compatible SDXC card (48 GB to 128 GB)  
0
When recording with video quality “UXP”, Class 6 or  
higher is recommended.  
0
When recording in progressive format (60p), Class 6 or  
higher is required.  
Still Image B  
SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) /  
SDXC card (48 GB to 128 GB)  
0
0
Using SD cards (including SDHC/SDXC cards) other than those specified  
above may result in recording failure or data loss.  
This unit is not guaranteed to operate with all SD cards, even when using the ones  
specified above. Some SD cards may not work due to specification changes, etc.  
To protect the data, do not touch the terminals of the SD card.  
When using an SDXC card, check its compatibility with the OS of your computer  
by referring to the Detailed User Guide.  
0
0
10  
 
o To use an SD card in SLOT B  
o To use SD cards that have been  
used on other devices  
Recording can be performed on a card  
when “REC VIDEO TO SLOTS” or “REC  
STILLS TO SLOTS” of “MEDIA  
Format (initialize) the card using  
“FORMAT SD CARD” from “MEDIA  
SETTINGS”.  
SETTINGS” menu is set to “SLOT B”.  
A
Open the LCD monitor.  
Tap “MENU”.  
Tap “MEDIA SETTINGS”.  
All data on the card will be deleted  
when it is formatted. Copy all files on  
the card to a PC before formatting.  
B
C
A
Perform steps A - C from “To use  
D
Tap “REC VIDEO TO SLOTS” or  
an SD card”.  
“REC STILLS TO SLOTS”.  
B
Tap “FORMAT SD CARD”.  
MEDIA SETTINGS  
MEDIA SETTINGS  
REC VIDEO TO SLOTS  
REC STILLS TO SLOTS  
FORMAT SD CARD  
.
.
E
Tap “SLOT B”.  
C
Tap the slot with the card to format.  
REC VIDEO TO SLOTS  
D
Tap “FILE”.  
FORMATTING SLOT A  
SLOT B  
FILE  
.
.
E
Tap “YES”.  
After formatting, tap “OK”.  
F
11  
Clock Setting  
Set the “STANDBY/ON OFF”  
After setting the date and time, tap  
SET.  
1
5
6
switch to “ON”.  
Select the region where you live  
and tap “SAVE”.  
Open the LCD monitor.  
2
0
Time difference between the selected  
city and the GMT (Greenwich Mean  
Time) is displayed.  
0
Tap “<” or “>” to select the city name.  
To change the display language  
The language on the display can be  
changed.  
A
Open the LCD monitor.  
Tap “MENU”.  
Tap “SETUP”.  
.
B
Tap “YES” when “SET DATE/  
C
3
TIME!” is displayed.  
D
Tap “LANGUAGE”.  
SETUP  
SET DATE/TIME!  
YES  
NO  
LANGUAGE  
.
.
E
Tap the desired language.  
Set the date and time.  
4
CLOCK SETTING  
DATE  
TIME  
00  
Memo  
0
DEC  
24  
2013  
10  
AM  
If “SET DATE/TIME!” appears  
after the clock has been set, the  
internal clock battery is drained.  
For details on replacing the  
battery, contact your nearest  
JVC dealer or JVC service  
center.  
SET  
.
0
When the year, month, day, hour, or  
minute item is tapped, “∧” and “∨” will  
be displayed.  
Tap “∧” or “∨” to adjust the value.  
Repeat this step to input the year,  
month, day, hour, and minute.  
0
12  
 
Video Recording  
You can record without worrying about the setting details by using the Intelligent Auto  
mode. Settings such as exposure and focus will be adjusted automatically to suit the  
shooting conditions.  
Before recording an important scene, it is recommended to conduct a trial  
recording.  
Check if the  
A video.  
Check if the recording  
Auto.  
Open the  
Start  
1lens cover. 2recording mode is 3mode is C Intelligent 4recording.  
If the mode is H Manual,  
tap H on the touch  
screen, then tap P to  
switch.  
A
If the mode is B still  
image, tap B on the  
touch screen, then tap  
A to switch.  
A
C
Press again  
to stop.  
P
H
(
: 60i (interlace) mode  
: 60p (progressive) mode )  
Zooming  
(Wide angle)  
(Telephoto)  
.
0
0
The mode can also be switched between video and still image by pressing the “MODE”  
button on this unit.  
The mode can also be switched between Intelligent Auto and Manual by pressing the  
“i.AUTO” button on this unit.  
0
0
0
0
You can also tap 6 on the touch screen to record. To stop recording, tap 7.  
The “REC” button and zoom lever on the handle can also be used.  
To use the viewfinder during recording, close the LCD monitor.  
To view images on the viewfinder, adjust the focus by turning the eyepiece focus lever  
at the bottom of the viewfinder.  
13  
 
o Indications during video recording  
Image Stabilizer  
Recording Media  
Battery 1 Indicator  
Battery 2 Indicator  
Video Quality  
Seamless recording *1 /  
Auto recovery recording *2  
Scene Counter  
0:00:00 [0:54]  
MENU  
Recording-Standby  
Remaining Recording Time  
Recording in Progress  
MEDIA  
REC  
.
*1 Seamless recording:  
Automatically switches to a different media and continues recording when two SD  
cards are inserted to this unit and the remaining space on the current recording media  
runs out.  
*2 Auto recovery recording:  
Automatically switches to a different media and continues recording when two SD  
cards are inserted to this unit and there is an error in the recording media.  
0
When only one SD card is being inserted, seamless recording and auto recovery  
recording cannot be performed. q will appear.  
The icon does not appear when “SEAMLESS RECORDING” in the “RECORD  
SETTING” menu is set to “OFF”.  
Memo  
0
0
After using, slide the lens cover switch to close the lens cover.  
The estimated recording time of the supplied battery pack is approximately 1  
hour 5 minutes.  
0
0
0
0
When recording is in progress with one battery attached, another battery can  
be attached without stopping recording.  
When 2 batteries are attached, removing one battery won’t cause the power to  
be turned off if there is remaining battery power on either one or both.  
Do not remove the AC adapter, or SD card when the access lamp is lighted.  
The recorded data may become unreadable.  
Do not turn off the camera when the access lamp is lighted. The recorded data  
may become unreadable.  
0
0
The angle of view may change when the image stabilizer is turned on or off.  
Videos recorded in 60p mode (select “60p” in “SYSTEM SELECT”) can be  
played back only by the AVCHD Progressive compatible devices.  
While this unit may be used with the LCD monitor reversed and closed, the  
temperature rises more easily. Leave the LCD monitor open when using this  
unit.  
0
0
The power may turn off to protect the circuit if the temperature of this unit rises  
too much.  
14  
Still Image Recording  
Check if the  
B still image.  
Set the focus on the subject.  
Press halfway  
recording mode is  
If the mode is A  
video, tap A on the  
touch screen, then  
tap B to switch.  
Lights up in green  
when focused  
Take a still image.  
Press fully  
Lights up during still  
image recording  
.
0
0
Image stabilization only starts when the button is pressed halfway.  
You can also tap Q on the touch screen to record. However, focus cannot be set by  
pressing halfway.  
15  
 
Playing Back/Deleting Files on this Unit  
Select and play back the recorded videos or still images from an index screen (thumbnail  
display).  
Volume adjustment during  
Tap A or B to select the video  
playback  
or still image mode.  
+ side:Turn up  
the volume  
(
: 60i (interlace) mode  
: 60p (progressive) mode )  
- side: turn  
down the  
volume  
Tap “<<MEDIA” on the touch  
screen to select the playback  
mode.  
Tap “<<CAM” to return to the  
recording mode.  
To delete unwanted files  
Tap A.  
Tap on the file to play back.  
Tap on the files to delete.  
A delete mark appears on the selected file.  
To remove the delete mark, tap again.  
DELETE  
CAM  
Tap s / t at the bottom to  
select the media for playback.  
SEL ALL  
REL ALL  
SET  
QUIT  
Tap e to pause playback.  
Tap “SET”.  
Tap “EXECUTE” when the confirmation  
Tap u to return to the index  
message appears.  
screen.  
Tap “OK”.  
.
0
The W button on the index screen is only displayed during still image playback. Still  
images that are recorded continuously within 2 seconds or with the continuous shooting  
mode will be grouped together and displayed with a green frame on a separate index  
screen.  
The index screen changes between the normal index screen and group index screen  
with every tap of the W button.  
o To capture a still image during playback  
Pause the playback and press the SNAPSHOT button.  
16  
 
o Usable operation buttons during playback  
During Video Playback  
d / e Playback/pause  
During Still Image Playback  
Start/pause slideshow  
u
Stop (returns to index screen)  
Advances to the next video  
Returns to the beginning of the scene  
Stop (returns to index screen)  
Advances to the next still image  
g
h
Returns to the previous still  
image  
i
j
k
Forward search  
Reverse search  
-
-
-
During pause forward slow-motion / During  
pause press and hold to start slow playback  
l
During pause reverse slow-motion / During  
pause press and hold to start reverse slow  
playback  
-
-
Rotates 90 degrees  
counterclockwise  
R
-
-
Rotates 90 degrees clockwise  
S
T
Continuous playback of  
images taken by continuous  
shooting  
0
The buttons disappear after approximately 5 seconds. Tap on the screen to display the  
buttons again.  
17  
Playing Back on TV  
Preparation:  
0
Turn off both camera and TV.  
To connect using the HDMI connector  
TV  
HDMI Cable  
(Sold Separately)  
HDMI Connector  
Input  
To HDMI  
Connector  
.
Memo  
0
Use a High Speed HDMI cable.  
To connect using the AV connector  
Change the settings of “VIDEO OUTPUT” in “CONNECTION SETTINGS” according to  
the connection.  
TV  
To AV Connector  
Video Input  
AV  
Yellow  
White  
Red  
Yellow  
White  
Red  
Video Input  
Audio Input (L)  
Audio Input (R)  
AV Cable  
(Provided)  
.
Playback Operation  
After the connection with TV is completed  
A
B
Turn on the camera and the TV.  
C
Select the TV input switch.  
D
Start playback on the camera.  
18  
 
Copying to Computer  
You can read and copy the files on the SD  
Tap “CONNECT TO PC”.  
2
card by connecting this unit to a computer  
using a USB cable.  
SELECT DEVICE  
Connect the USB cable and the AC  
SELECT DEVICE  
1
TYPE TO CONNECT  
adapter.  
CONNECT TO PC  
.
Windows  
Select “Computer” (Windows  
Vista) / “My Computer” (Windows  
XP) / “Computer” (Windows 7) from  
the “Start” menu, then click on the  
“JVCCAM_SD” icon.  
To DC  
To USB Connector  
Connector  
3
Mac Computer  
Double-click on the “No Name”  
icon, then click on the  
USB Cable  
(Provided)  
“JVCCAM_SD” icon.  
0
Open the folder with the desired files.  
AC Adapter To AC  
Outlet (110 V to  
240 V)  
Copy the files to any folder in the  
computer (desktop, etc).  
4
To USB Connector  
.
A
Connect using the provided USB  
cable.  
B
C
Connect the AC adapter to this  
unit.  
Turn on the camera.  
0
0
Be sure to use the supplied JVC AC  
adapter.  
The “SELECT DEVICE” menu  
appears.  
19  
 
Disconnecting this Unit from Computer  
(Windows)  
Disconnecting this Unit from Computer  
(Mac Computer)  
Throw the “No Name” icon into the trash  
can.  
Click “Safely Remove Hardware  
1
and Eject Media”.  
No Name  
Trash  
.
Click  
.
Click “Safely Remove USB Mass  
2
Storage Device”.  
(For Windows Vista) Click “OK”.  
3
Disconnect the USB cable from the  
4
computer.  
List of Files and Folders  
Folders and files are created in the SD card as shown below.  
They are created only when necessary.  
(Still Image Folder)  
[100JVCSO]  
[101JVCSO]  
[102JVCSO]  
PIC_0001.JPG  
PIC_0002.JPG  
PIC_0003.JPG  
[JVCCAM_SD]  
(SD Card)  
[DCIM]  
(Still Image File)  
[EXTMOV]  
[PRIVATE]  
MOV_0001.MTS  
MOV_0002.MTS  
MOV_0003.MTS  
(Video files with defective management information)  
[AVCHD]  
[JVC]  
[BDMV]  
**XXX.MTS  
(Video File)  
[STREAM]  
(Management Information)  
[BACKUP]  
**: Unique Number  
[CLIPINF]  
(Last 2 Digits of Unit Serial  
Number)  
[PLAYLIST]  
[INDEX.BDM]  
[MOVIEOBJ.BDM]  
.
Caution  
0
When the camera and PC are connected by an USB cable, recorded media  
are read-only.  
20  
 
Changing Menu Settings  
To change camera settings, tapMENU]  
and select the item which you want to  
change.  
Tap the desired item to change the  
3
settings.  
(Icon type screen)  
Tap “MENU”.  
1
.
0
Tap 0 or 1 to scroll the screen.  
MEDIA  
REC  
MENU  
.
(List type screen)  
Tap the desired menu.  
2
.
0
Tap “∧” or “∨” to scroll the screen.  
OFF  
.
o To exit the screen  
0
“SILENT”: sets the camera to “silent  
mode”.  
Tap “L”.  
“INFO.”: displays “remaining recording o To return to the previous screen  
time”.  
Tap “J”.  
0
Tap F to display “shortcut menu”.  
21  
 
Troubleshooting  
If you encounter problems with this unit, check the following before requesting service.  
1
2
Refer to “Trouble” below.  
Refer to the “Troubleshooting” section in the “Detailed User Guide”.  
If you have difficulties operating the unit, refer to the detailed descriptions in the  
“Detailed User Guide”.  
3
This unit is a microcomputer-controlled device. Electrostatic discharge, external  
noise and interference (from a TV, a radio, etc.) might prevent it from functioning  
properly.  
In such a case, reset the unit.  
A
Turn off the power.  
Remove the AC adapter and battery pack from this unit, reattach them, turn  
B
on the power.  
4
If the above do not solve the problem, consult your nearest JVC dealer or JVC  
service center.  
Trouble  
Trouble  
Action  
Page  
8
0
The battery pack is being charged.  
POWER/CHARGE  
lamp starts blinking  
when the power is  
turned off.  
0
0
Check the A/B button.  
13  
16  
Recording cannot be  
performed.  
Set to the recording mode by tapping  
the “<<CAM” button.  
0
Turn off this unit, wait for a while, and  
turn it on again. (This unit stops  
automatically to protect the circuit  
when the temperature rises.)  
-
Recording stops  
automatically.  
0
0
Recording stops automatically after  
12 hours of continuous recording.  
-
-
When there are multiple light sources  
and depending on the shooting  
conditions, exposure and focus may  
not be adjusted correctly in the  
Intelligent Auto mode. In this case,  
adjust the settings manually.  
Unable to record  
properly in the  
Intelligent Auto mode.  
0
Sometimes playback is interrupted at  
the connecting section between two  
scenes. This is not a malfunction.  
-
Sound or video is  
interrupted.  
22  
 
0
0
Check the remaining battery power.  
(When the battery pack is fully  
charged, the lamp does not flash.)  
When charging in either a hot or cold  
environment, ensure that battery is  
being charged within the permitted  
temperature range. (Otherwise,  
charging may stop to protect the  
battery pack.)  
8
-
The lamp does not flash  
during battery pack  
charging.  
8
0
This is not a malfunction. (This unit  
may become warm when used for a  
long time.)  
-
This unit heats up.  
Warning Indications  
Warning Indications  
Action  
Page  
0
0
Turn off and on this unit again.  
If the above does not solve the  
problem, back up your files and  
execute “FORMAT SD CARD” in the  
“MEDIA SETTINGS” menu. (All data  
will be deleted.)  
-
-
RECORDING FAILURE  
0
When “TIME-LAPSE RECORDING”  
is stopped with the recorded time  
less than “0:00:00:17”, the video will  
not be saved.  
-
DATA RECORDED FILE IS  
TOO SMALL TO BE SAVED  
0
0
Turn off and on this unit again.  
Remove the AC adapter and battery  
pack, then remove and re-insert the  
SD card.  
-
-
0
0
Remove any dirt from the SD card  
terminals.  
-
-
MEMORY CARD ERROR!  
If the above does not solve the  
problem, back up your files and  
execute “FORMAT SD CARD” in the  
“MEDIA SETTINGS” menu. (All data  
will be deleted.)  
23  
Cautions  
BatteryPack
Recording Medium  
The supplied battery pack is a  
lithium-ion battery. Before using  
the supplied battery pack or an  
optional battery pack, be sure  
to read the following cautions:  
Terminals  
Be sure to follow the guidelines below  
to prevent corruption or damage to your  
recorded data.  
Do not bend or drop the recording medium,  
or subject it to strong pressure, jolts or  
vibrations.  
To avoid hazards  
... do not burn.  
Do not splash the recording medium with water.  
... do not short-circuit the terminals. Keep it away  
from metallic objects when not in use. When  
transporting, make sure the provided battery cap  
is attached to the battery. If the battery cap is  
misplaced, carry the battery in a plastic bag.  
... do not modify or disassemble.  
Do not use, replace, or store the recording  
medium in locations that are exposed to  
strong static electricity or electrical noise.  
Do not turn off the camcorder power or  
remove the battery or AC adapter during  
shooting, playback, or when otherwise  
accessing the recording medium.  
... do not expose the battery to temperatures  
exceeding 60°C (140°F), as this may cause the  
battery to overheat, explode or catch fire.  
... use only specified chargers.  
Do not bring the recording medium near  
objects that have a strong magnetic field or  
that emit strong electromagnetic waves.  
To prevent damage and prolong service life  
Do not store the recording medium in locations  
... do not subject to unnecessary shock.  
... charge within the temperature range of 10°C  
to 35°C (50°F to 95°F). Cooler temperatures  
require longer charging time, or in some cases  
stop charging at all. Warmer temperatures prevent  
complete charging, or in some cases stop charging  
at all.  
with high temperature or high humidity.  
Do not touch the metal parts.  
When formatting or erasing data using  
the camcorder, only the file administration  
information is changed. The data is not  
completely erased from the recording medium.  
If you want to completely erase all of the data,  
we recommend either using commercially  
available software that is specially designed for  
that purpose, or by physically destroying the  
camcorder with a hammer etc.  
... store in a cool, dry place. Extended exposure  
to high temperatures will increase natural  
discharge and shorten service life.  
...  
keep a 30% battery level ( ) if the battery pack is  
not to be used for a long period of time. In addition,  
fully charge and then fully discharge the battery  
pack every 6 months, then continue to store it at  
a 30% battery level ( ).  
LCD Monitor  
... remove from charger or powered unit when not  
in use, as some machines use current even  
when switched off.  
To prevent damage to the LCD monitor, DO  
NOT  
... do not drop or subject to strong impact.  
... push it strongly or apply any shocks.  
... place the camcorder with LCD monitor on the  
bottom.  
ATTENTION:  
To prolong service life  
The product you have purchased  
is powered by a rechargeable  
battery that is recyclable.  
Please call 1-800-8-BATTERY for  
information on how to recycle this  
battery.  
... avoid rubbing it with coarse cloth.  
While the LCD monitor screen and viewfinder  
have more than 99.99% effective pixels, 0.01%  
of the pixels may be bright spots (red, blue,  
green) or dark spots. This is not a malfunction.  
The spots will not be recorded.  
(USA and Canada only)  
.
24  
   
This device complies with Part 15 of FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference,  
and (2) this device must accept any interference  
received, including interference that may cause  
undesired operation.  
Main Unit  
For safety, DO NOT  
... open the camcorder’s chassis.  
... disassemble or modify the unit.  
... allow infl ammables, water or metallic objects to  
enter the unit.  
... remove the battery pack or disconnect the  
power supply while the power is on.  
... leave the battery pack attached when the  
camcorder is not in use.  
Changes or modifications not approved by JVC  
could void the user’s authority to operate the  
equipment. This equipment has been tested  
and found to comply with the limits for a Class A  
digital device, pursuant to Part 15 of the FCC  
Rules.  
... place naked fl ame sources, such as lighted  
candles, on the apparatus.  
... expose the apparatus to dripping or splashing.  
... leave dust or metal objects adhered to the  
power plug or an AC wall outlet.  
These limits are designed to provide reasonable  
protection against harmful interference when  
the equipment is operated in a commercial  
environment.  
... insert any objects in the camcorder.  
Avoid using the unit  
... in places subject to excessive humidity or dust.  
... in places subject to soot or steam such as near  
a cooking stove.  
This equipment generates, uses, and can  
radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful interference to  
radio communications. Operation of this  
equipment in a residential area is likely to cause  
harmful interference in which case the user will  
be required to correct the interference at his  
own expense.  
... in places subject to excessive shock or vibration.  
... near a television set.  
... near appliances generating strong magnetic  
or electric fields (speakers, broadcasting  
antennas, etc.).  
... in places subject to extremely high (over 40°C or  
104°F) or extremely low (under 0°C or 32°F  
)
temperatures.  
DO NOT leave the unit  
... in places of over 50°C (122°F).  
CAN ICES-3 A/NMB-3 A  
... in places where humidity is extremely low  
(below 35%) or extremely high (above 80%).  
... in direct sunlight.  
... in a closed car in summer.  
... near a heater.  
... in high places such as on a TV. Leaving the unit  
in high places while a cable is connected may  
result in a malfunction if the cable is caught and  
the unit falls onto the floor.  
To protect the unit, DO NOT  
... allow it to become wet.  
... drop the unit or strike it against hard objects.  
... subject it to shock or excessive vibration during  
transportation.  
... keep the lens directed at extremely bright  
objects for long periods.  
... expose the lens to direct sunlight.  
... swing it excessively when using the hand strap.  
... swing the soft camcorder case excessively  
when the camcorder is inside it.  
... store the camcorder in a dusty or sandy area.  
... cover camcorder with a towel, cloth and so on.  
To prevent the unit from dropping,  
Fasten the grip belt securely.  
When using the camcorder with a tripod,  
attach the camcorder to the tripod securely.  
If the camcorder drops, you may be injured and  
the camcorder may be damaged.  
When a child uses the unit, there must be  
parental guidance.  
.
25  
Recordable Time/Number of Images  
Approximate Video Recording Time  
SDHC/SDXC card  
Quality  
4 GB  
15 m  
8 GB  
35 m  
16 GB  
1 h 10 m  
1 h 20 m  
2 h  
32 GB  
2 h 30 m  
2 h 50 m  
4 h  
48 GB  
3 h 50 m  
4 h 10 m  
6 h  
8 h 30 m  
21 h 30 m  
16 h 40 m  
34 h 30 m  
64 GB  
5 h  
128 GB  
60p  
UXP  
XP  
10 h 10 m  
11 h 30 m  
16 h 20 m  
23 h 10 m  
57 h 50 m  
44 h 50 m  
92 h 40 m  
20 m  
30 m  
40 m  
40 m  
1 h  
1 h 20 m  
3 h 30 m  
2 h 40 m  
5 h 40 m  
5 h 40 m  
8 h 10 m  
11 h 30 m  
28 h 50 m  
22 h 20 m  
46 h 10 m  
SP  
EP  
SSW  
SEW  
2 h 50 m  
7 h 10 m  
5 h 30 m  
11 h 30 m  
5 h 50 m  
14 h 40 m  
11 h 20 m  
23 h 30 m  
1 h 40 m  
1 h 20 m  
2 h 50 m  
0
The approximate recording time is only a guide. The actual recording time may shorten  
depending on the shooting environment.  
Approximate Number of Still Images (Unit: Number of Shots)  
SDHC Card  
Image Size  
4 GB  
500  
8 GB  
1100  
2200  
4200  
6500  
9999  
16 GB  
2200  
4500  
8500  
9999  
9999  
32 GB  
4500  
9200  
9999  
9999  
9999  
4000x3000 (12M) (4:3)  
2816x2112 (5.9M) (4:3)  
2048x1536 (3.1M) (4:3)  
1920x1080 (2.1M) (16:9)  
640x480 (0.3M) (4:3)  
1100  
2100  
3100  
9999  
Approximate Recording Time (Using Battery)  
Battery Pack Actual Recording Time  
BN-VF815U 1 h 15 m  
BN-VF823U (supplied) 1 h 50 m  
Continuous Recording Time  
2 h 25 m  
3 h 30 m  
0
The battery pack is not charged at the time of purchase.  
0
The actual recording time is an estimated length of time when operations such as to  
start/stop recording, turning on/off the power, zooming are performed. It may be  
shortened in the actual use. (It is recommended to prepare battery packs ready for three  
times the expected recording time.)  
0
The above are values when “MONITOR BRIGHTNESS” is set to “3” (standard), and  
“SYSTEM SELECT” is set to 60i.  
26  
 
Specifications  
Camera  
Power supply  
Using AC adapter: DC 11 V, Using battery pack: DC 7.2 V  
Power consumption 3.6 W (when “MONITOR BRIGHTNESS” is set to “3” (standard))  
Rated Current Consumption : 1A  
Dimensions (mm) 227 mm x 232 mm x 472 mm (8-15/16" x 9-3/16" x 18-5/8") (W x H  
x D: excluding grip belt)  
Mass  
Approx. 2.9 kg (6.4 lbs) (camera only),  
Approx. 3.1 kg (6.9 lbs) (when 2pcs of the battery BN-VF823U are  
attached)  
The specifications and appearance of this product are subject to changes for further  
improvement without prior notice.  
For more information, please refer to the Detailed User Guide.  
■ Para Brasil  
Informação sobre eliminação de baterias  
Este produto não deverá ser eliminado como lixo doméstico em geral.  
Devolva a bateria velha ao comerciante ou para a rede autorizada, para que seja devolvida  
ao fabricante ou importador.  
A reciclagem e eliminação de lixo em uma maneira adequada, ajudarão para preservar  
recursos, prevenindo, ao mesmo tempo, contra efeitos prejudiciais sobre a nossa saúde e  
o meio ambiente.  
Para Retirar a Bateria Recarregável  
Pressione botão e puxe a bateria para fora.  
.
27  
 
.
*LYT2647-001A-M*  
0513HOH-SW-VM  
©2013 JVC KENWOOD Corporation  
U

Alpine CDA 7965 User Manual
Bushnell Binoculars 13 7500 User Manual
Canon EF24 User Manual
Canon MD101 User Manual
Casio SF 4985ER User Manual
Casio s v p a m fx 85MS User Manual
Cisco Systems Flip Ultra2HD User Manual
Clarion APX480M User Manual
Fisher Paykel Beverage Dispenser RF24R User Manual
JVC CS ARS650 User Manual