Gefen GEF HDMI1 3 2 3GSDI User Manual

1080P  
HDMI 1.3 to 3G-SDI Converter  
GEF-HDMI1.3-2-3GSDI  
User Manual  
CONTENTS  
1
2
3
4
5
6
7
8
9
Introduction  
Operation Notes  
Features  
Panel Layout  
Panel Descriptions  
Bottom Panel Layout  
Bottom Panel Descriptions  
Connecting And Operating The HDMI 1.3 To 3GSDI Converter  
DIP Switch Features  
10 Specications  
11 Warranty  
INTRODUCTION  
Congratulations on your purchase of the GefenPRO HDMI 1.3 to 3GSDI  
Converter. Your complete satisfaction is very important to us.  
Gefen  
Gefen delivers innovative, progressive computer and electronics add-on solutions  
that harness integration, extension, distribution and conversion technologies.  
Gefen’s reliable, plug-and-play products supplement cross-platform computer  
systems, professional audio/video environments and HDTV systems of all sizes  
with hard-working solutions that are easy to implement and simple to operate.  
The GefenPRO HDMI 1.3 to 3GSDI Converter  
The GefenPRO HDMI1.3 to 3GSDI Converter takes a single HDMI input signal  
and converts it to SDI standard denition, HD-SDI (single link only) high-  
denition, or 3G-SDI high-denition with ultra high bandwidth. Converted HDMI  
audio/video signals are output in SDI/HD-SDI/3G-SDI format on two SDI BNC  
connectors with up to 8 channels of converted HDMI audio present in the output  
signal.  
A single pair of RCA-type L/R analog audio output jacks enables monitoring of  
the rst two (2) audio channels embedded in the HDMI audio source signal.  
LED indicators on the front and bottom of the unit provide HDMI and SDI signal  
status for troubleshooting assistance in the event of errors.  
How It Works  
An HDMI source is connected to the HDMI input on the GefenPRO HDMI 1.3  
to 3GSDI Converter. An SDI device is connected to the SDI outputs on the  
Converter. The included power supply is connected to the GefenPRO HDMI  
1.3 to 3GSDI Converter. When the HDMI source and the GefenPRO HDMI 1.3  
to 3GSDI Converter are connected and powered on, audio/video signals are  
converted to the proper format on connected A/V output devices (displays, audio  
receivers).  
A bank of dedicated DIP (Dual Inline Package) switches on the underside of the  
unit allows control over features of the Converter, including Sampling, and Color  
Space/Color Depth settings.  
PC video input formats are not supported. This device does not scale video. Only  
SMPTE formats are supported on the SDI outputs.  
1
OPERATION NOTES  
READ THESE NOTES BEFORE INSTALLING OR  
OPERATING THE GEFENPRO HDMI 1.3 TO 3GSDI CONVERTER  
The Converter is compliant to SD/HD SDI SMPTE 292M, SMPTE 274M,  
SMPTE 259M, SMPTE 296M, ITU-R BT.656 and ITU-R BT.601  
The Converter handles 3G-SDI SMPTE 425-A and 425-B / formats 1080P  
50/59.94/60  
The HDMI to 3GSDI Converter supports the following resolutions:  
Video Resolution  
525i (NTSC) (480i)  
625i (PAL) (576i)  
Refresh Rate (Hz)  
Rate  
SD  
59.94  
50  
SD  
50  
HD  
720p  
1080i  
59.94  
60  
HD  
HD  
50  
HD  
59.94  
60  
HD  
HD  
23.98  
24  
HD  
HD  
25  
HD  
29.97  
30  
HD  
1080p  
HD  
50  
3G lev.A/B  
3G lev.A/B  
3G lev.A/B  
HD  
59.94  
60  
23.97  
24  
2K  
HD  
25  
HD  
HDMI source audio is converted to SDI audio only when the audio sampling  
rate is 48 KHz; other rates will produce unrecognizeable audio.  
Color spaces are automatically converted (RGB to YCbCr) and color  
subsampling (4:4:4 to 4:2:2) is automatically performed when using SDI  
equipment.  
When using SDI and HD-SDI equipment, outputs A and B are mirrored.  
The rst 2 channels of HDMI audio embedded within the source signal are  
output on the L/R analog audio RCA connectors for monitoring purposes.  
2
FEATURES  
Features  
The Converter is plug and play. Additional conguration is available via built-  
in bank of DIP switches underneath the unit  
Firmware is upgradable in the eld using the integrated USB port  
Integrated 720p 60Hz test pattern is available for use without the need of a  
video/audio input signal  
Supports up to 8 channels of audio output on the 3GSDI connector  
2 Analog audio outputs are provided to monitor incoming HDMI audio  
(obtained from the converted rst two channels of the HDMI source signal)  
Input resolutions up to 2K (2048x1080) are supported; Output resolutions of  
up to 1080p@60 Hz are supported.  
Dual outputs are available when using SDI and HD-SDI equipment  
Settings are done via the built-in bank of DIP switches underneath the unit  
Handles 3G-SDI SMPTE 425-A and 425-B (auto converts B to A)  
The Converter uses a locking power input for secure connections  
Package Includes  
(1) GefenPRO HDMI 1.3 to 3GSDI Converter  
(1) 6 ft HDMI input cable (M-M)  
(1) 5V DC Locking Power Supply  
(1) User Manual  
3
PANEL LAYOUT  
Front Panel  
1
2
3
Back Panel  
4
5
6
7
8
9
4
PANEL DESCRIPTIONS  
1
2
3
Video Lock LED Indicator  
This indicator will become active once the HDMI input signal has been locked.  
3G LED Indicator  
This indicator will become active when the output video stream is a 3G signal.  
Power LED Indicator  
This indicator will become active when power is being supplied to the unit via the  
included 5V DC power adapter.  
4
5
6
Locking 5V DC Power Receptacle  
This input will accept power via the included locking 5V DC power supply.  
Connect the power supply between this input and an open wall power socket.  
USB Update Port  
This port is used to update rmware. For current rmware releases, please see  
Analog RCA L+R Audio Ouput  
This input will output the rst two (2) channels of analog audio extracted from  
the digital HDMI input source on RCA style L+R analog audio connectors. The  
primary purpose of these outputs is for monitoring purposes.  
7
8
HDMI Input  
This input will accept a single HDMI type A male cable. For acceptable input  
formats please see page 2.  
SDI Output Channel A  
This output sends converted SD/HD/3G-SDI audio/video to a single SD/HD/3G-  
SDI device using a user supplied SDI cable. Converted HDMI signals will be  
output through this SDI port. For a full description of the supported A/V formats  
on this output please see page 2.  
9
SDI Output Channel B  
This output sends converted SD/HD/3G-SDI audio/video to a single SD/HD/3G-  
SDI device using a user supplied SDI cable. Converted HDMI signals will be  
output through this SDI port. For a full description of the supported A/V formats  
on this output please see page 2.  
The converted HDMI signal will be output by default through this port (mirror  
output of Channel A) unless the 3G-SDI Level B mode is selected and the input  
video is 1080p 50/59/60Hz.  
5
BOTTOM PANEL LAYOUT  
Bottom Panel  
1
2
3
4
5
6
BOTTOM PANEL DESCRIPTIONS  
1
2
HDCP LED Indicator  
This LED indicator will relay the status of the incoming HDMI’s HDCP status.  
Options are either HDCP encrypted (LED ON) or No HDCP present (LED OFF).  
NOTE: In accordance with HDCP regulations, HDCP encrypted HDMI  
sources will not be converted to SDI output formats.  
HDMI Input Color Space LED Indicator  
This LED indicator will relay the status of the incoming HDMI input’s color space.  
Options are either YCbCr (LED ON) or RGB (LED OFF).  
NOTE: When the input color space is RGB, a conversion takes place to  
output SDI in YCbCr format.  
3
4
Conguration DIP Switches  
This DIP (Dual In-line Packages) switches will enable disable features on the  
GefenPRO HDMI 1.3 to 3GSDI Converter. For a complete listing of DIP switch  
features and functions please see page 9.  
HDMI Input Color Subsampling LED Indicator  
This LED indicator will relay the status of the incoming HDMI input’s color  
subsampling. Options are either 4:2:2 (LED ON) or 4:4:4 (LED OFF).  
NOTE: When the input sampling is 4:4:4, a conversion takes place to  
output SDI in 4:2:2 format.  
5
HDMI Deep Color LED Indicator  
This LED indicator will indicate the presence of Deep Color (at least 10bit) in the  
incoming HDMI input signal. Options are either Deep Color present (LED ON) or  
Deep Color not present (LED OFF).  
7
CONNECTING & OPERATING  
THE GEFENPRO HDMI 1.3 TO 3GSDI CONVERTER  
How to Connect the HDMI to 3GSDI Converter  
1. Connect the HDMI 1.3 source to the HDMI input of the HDMI to 3GSDI  
Converter using the supplied HDMI cable.  
2. Optionally connect a two channel analog audio device to the RCA style L+R  
analog audio connectors for monitoring of the audio from the HDMI input.  
3. Connect an SDI (SD/HD/3G) capable output device to the HDMI output  
port(s) on the HDMI to 3GSDI Converter using a user supplied SDI cable.  
NOTE: The Converter will send a mirror image of the signal coming from the  
source device to the B output port when the connected output devices are  
SDI- or HD-SDI-compliant. When the output device is 3G-SDI-compliant, the  
Converter can be set to run in Level A or B Mode. (Please see page 9 for  
conguration options.)  
4. Connect included 5V DC power supply to the locking power receptacle of the  
HDMI to 3GSDI Converter and an open wall power socket.  
How to Operate the HDMI to 3GSDI Converter  
The HDMI to 3GSDI Converter has a series of DIP (Dual Inline Package)  
switches that will allow manual conguration of features. Please see page 9 for  
DIP switch features and operation.  
8
DIP SWITCH FEATURES  
The DIP switch feature panel is located on the underside of the HDMI to 3GSDI  
Converter. Please use the diagram and chart below to congure the DIP switch  
settings. Adjustments should be made with a small pointed object such as a  
toothpick, a mechanical pencil with the lead retracted or a mini screwdriver.  
DIP SWITCHES  
OFF  
(Factory Default)  
Switch  
Description  
On  
1
2
3
4
Test pattern  
N/A  
Off  
N/A  
On  
N/A  
RGB Input Range  
N/A  
16-235(limited)  
N/A  
0-255 (full)  
N/A  
3G Mapping  
(425M Level)  
5
6
Direct (A)  
N/A  
Dual Link (B)  
N/A  
N/A  
7
8
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
DIP 1 - The color bar test pattern is in 720p (60Hz) format. No valid input is  
necessary at the SDI connector to use the test pattern.  
DIP 3 - The RGB Input Range switch is used to toggle between Limited-Range  
RGB or Full-Range RGB: 16-235 or 0 - 255.  
DIP 5 - Please note that some 3G-SDI equipment does not support both level  
A and level B. Set this switch according to the supported 3G level of your SDI  
equipment connected to the HDMI to 3GSDI Converter.  
9
SPECIFICATIONS  
Maximum input resolution (HDMI).............................................. 2K (2048x1080p)  
Maximum output resolution (SDI)....................................................1080p @ 60 Hz  
Maximum audio channels output (SDI)................................ 8 channels @ 48 KHz  
Analog Audio output / monitoring channels (from HDMI source) ......................... 2  
Input Connector.....................................................(1) HDMI Type A 19-pin Female  
Input Connector.................(1) Power connector, female right-angle locking 5V DC  
USB Input Connector..................... (1) USB female, type B (for rmware updates)  
Audio Output Connector.............................. (2) RCA-type L+R analog audio jacks  
Video Output Connector....................................(2) SDI/HD-SDI/3G-SDI male BNC  
LED Front............................................................................ (1) 3G data rate detect  
LED Front..................................................................... (1) HDMI 1080p video lock  
LED Front................................................................................ (1) 5V power detect  
LED Rear...................................................................................... (1) HDCP detect  
LED Rear.................................................... (1) YCbCr / RGB color space indicator  
LED Rear.............................................(1) 4:4:4 / 4:2:2 color subsampling indicator  
LED Rear................................................................................. (1) Deep Color LED  
SDI Compliant.......................................................(SMPTE 259M, up to 360 Mb/s)  
HD-SDI Compliant.............................................(SMPTE 292M, up to 1.485 Gbps)  
3G-SDI Compliant........................................(SMPTE 494M/495M, up to 3.0 Gbps)  
3G-SDI Levels A and B...................................Compliant for 1080P resolution only  
Power Supply...................................5V DC / Power Consumption 2.5 Watts (max)  
Dimensions..........................................................................7.5’’D x 8.2’’ W x 1.7’’H  
Rack Size..........................................................................................1U (half-width)  
Shipping Weight..............................................................................................4 lbs.  
HDMI 1.3 Compliant / HDMI 1.2 Compatible  
Field-upgradeable rmware  
10  
11  
Rev A1  
20600 Nordhoff St., Chatsworth CA 91311  
1-800-545-6900 818-772-9100 fax: 818-772-9120  
Pb  

Alpine IVA C800 User Manual
Blaupunkt PORTO CD34 7 644 176 310 User Manual
Bosch Appliances Boiler R 40 HE User Manual
Burnham V9A User Manual
Crestron electronic CNXFZ User Manual
DeLonghi KF8110J User Manual
Ikelite ZR900 User Manual
Infinity KAPPA SERIES 652 3I User Manual
Jagermeister Beverage Dispenser JEM User Manual
JVC GR SX887 User Manual