Xerox Workcentre Pro 255 User Manual

Microsoft Windows (NetBEUI) Peer-to-Peer Networks Quick Install Card  
Xerox Document Centre 240/255/265 LP/ST  
5.  
Assign the Workgroup and Host Names  
Before You Start  
b) On the keypad enter 1111 or the  
current password. Press the Enter  
button when finished. If your printer is  
an ST model press the Go to Tools  
button, otherwise skip to the next step.  
a) You will be returned to the previous  
screen, press the Workgroup and  
Host button.  
If your printer is equipped with a Token Ring  
interface, use the Token Ring Quick Install  
Card supplied in this Quick Install Card set to  
set the Ring Speed and Source Routing settings  
for your environment.  
b) At the next screen, press the  
Workgroup Name button. Using the  
Touch Screen keys, enter the name of  
the workgroup in which you want the  
printer to appear then press Save.  
c) The Touch Screen will be used for the  
.
remainder of the data entry.  
Record the following information:  
3.  
4.  
Enable Microsoft Network printing.  
Network Interface Type ___________________  
Workgroup Name _______________________  
SMB Host Name ________________________  
Printer Name ___________________________  
OPTIONAL INFORMATION:  
a) Press the Connectivity and Network  
c) You will be returned to the previous  
screen. Press the SMB Host Name  
button. Using the touch panel keys,  
enter the desired text for this item then  
press Save.  
Setup button.  
b) At the next screen, press the Network  
Setup button.  
Enable the Protocol and Media.  
d) OPTIONAL STEP: Press the SMB  
Host Description button, enter the  
desired text then press Save. You will  
be returned to the previous screen.  
a) At the next screen, press the  
Microsoft Networking button.  
b) At the next screen, press the  
SMB Host Description ____________________  
Printer Description _______________________  
Transport and Media button.  
e) Press Save again to return to the  
c) At the next screen, press the Enable  
button to enable the Microsoft Network  
protocols.  
previous screen.  
6.  
Assign a Printer Name and Description  
Go to the printer and...  
a) Press the Printer Description button.  
d) Once enabled the Physical Media  
portion of the screen will appear. Press  
the corresponding button to select one  
of the following NetBEUI or Ethernet,  
NetBEUI/Token Ring. After making  
your selection press Save.  
1.  
2.  
Connect your Document Centre to the net-  
work with the appropriate cabling.  
b) Press the Printer Name button, using  
the touch panel keys, enter the  
desired text for this item then press  
Save. Press Save again to return to  
the previous screen.  
Enter the Tools pathway  
a) Press the Access ( ) button.  
For assistance, contact your local Xerox Customer Support Center:  
USA: 1-800-821-2797 Canada: 1-800-939-3769  
Page 1  

Toshiba Rav Sm802ct E User Manual
MIDLAND BT GO 03 User Manual
KENWOOD KDC X794 User Manual
CRYSTAL VIDEO PRO 800 CC8980 User Manual
CROWN MPX 6 User Manual
CRAFTSMAN 316.381880 User Manual
CRAFTSMAN 139.53641SRT User Manual
CANON TS3500 User Manual
BLACK DECKER FIRESTORM FS2NC User Manual
BLACK DECKER CM2040 User Manual