WorkCentre 4118
User Guide
32N00467
Table of Contents
Safety Notes............................................................................................... 1-6
Ozone Safety Information ..................................................................... 1-9
Laser Safety Information..................................................................... 1-10
Unpacking .................................................................................................. 2-2
CD Contents.......................................................................................... 2-3
CD Installation....................................................................................... 2-5
Machine Overview ..................................................................................... 2-6
Models and Options .............................................................................. 2-6
Component Location ............................................................................. 2-7
Control Panel Overview ........................................................................ 2-9
2 in 1 Control panel............................................................................... 2-9
Xerox WorkCentre 4118 User Guide
Page i
4 in 1 Control panel............................................................................... 2-9
Loading Paper.......................................................................................... 2-17
Machine Setup Options....................................................................... 2-21
Installing Software................................................................................... 2-24
3 Copy........................................................................................3-1
Feature Description............................................................................... 3-6
Feature Description............................................................................... 3-9
Loading Paper............................................................................................ 4-2
Using the Paper Trays .......................................................................... 4-2
Setting the Paper Size............................................................................... 4-8
Dialing Methods......................................................................................... 5-6
Basic Fax Features.................................................................................... 5-8
Feature Description............................................................................... 5-8
Special Fax Features............................................................................... 5-10
Feature Description............................................................................. 5-10
Fax Forwarding........................................................................................ 5-14
Mailbox Setup .......................................................................................... 5-15
Page ii
Xerox WorkCentre 4118 User Guide
Create a Mailbox................................................................................. 5-15
Storing Documents in a Mailbox ......................................................... 5-17
Deleting Mailbox Contents .................................................................. 5-19
Polling from a Mailbox......................................................................... 5-20
Sending to a Mailbox........................................................................... 5-21
Fax Setup Options................................................................................... 5-22
Printer Settings.......................................................................................... 6-3
Accessing Printer Settings .................................................................... 6-3
Layout Tab ............................................................................................ 6-6
Paper Tab ............................................................................................. 6-7
Output Options Tab............................................................................... 6-9
About Tab............................................................................................ 6-11
Reports Available.................................................................................. 8-2
Printing Reports .................................................................................... 8-3
ControlCentre............................................................................................. 8-4
Installing ControlCentre......................................................................... 8-4
Running ControlCentre ......................................................................... 8-4
Using ControlCentre.............................................................................. 8-4
Passcode Protection ................................................................................. 8-7
Enable Passcode Protection................................................................. 8-7
Change the Passcode........................................................................... 8-8
Xerox WorkCentre 4118 User Guide
Page iii
Clear Memory............................................................................................. 8-9
Clearing the Memory............................................................................. 8-9
Check the Serial Number .................................................................... 8-10
Notify Toner Low................................................................................. 8-11
Clean Drum......................................................................................... 8-12
Billing Counters................................................................................... 8-12
Enabling or Disabling Auxiliary Access................................................ 8-13
Glass..................................................................................................... 9-2
Control Panel and LCD ......................................................................... 9-3
Toner Cartridge..................................................................................... 9-5
General ..................................................................................................... 10-2
Fault Clearance........................................................................................ 10-3
Paper Jams......................................................................................... 10-6
Paper Exit Area................................................................................... 10-7
Bypass Tray Jam ................................................................................ 10-9
Copying Problems............................................................................. 10-14
Printing Problems.............................................................................. 10-15
Faxing Problems Solution Chart ....................................................... 10-17
11 Specifications ......................................................................11-1
Introduction.............................................................................................. 11-2
Printer Specifications.............................................................................. 11-3
Page iv
Xerox WorkCentre 4118 User Guide
Fax Specifications ................................................................................... 11-4
Scanner and Copier Specifications ....................................................... 11-5
General Specifications............................................................................ 11-6
Media Specifications ............................................................................... 11-7
12 Index .......................................................................................1-1
Xerox WorkCentre 4118 User Guide
Page v
Page vi
Xerox WorkCentre 4118 User Guide
1 Welcome
Guide.
¾ Regulatory Information . . . . . . . . . . . . . . . . . . . . 1-12
¾ Environmental Compliance . . . . . . . . . . . . . . . . . 1-16
¾ Illegal Copies. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17
¾ Product Recycling and Disposal . . . . . . . . . . . . . 1-20
Xerox WorkCentre 4118 User Guide
Page 1-1
Introduction
Xerox WorkCentre 4118p
Hereafter the 4118p will be referred to in this documentation as the 2 in 1 model.
The 2 in 1 model provides digital copying and direct printing at 17 pages per minute A4 or 18
pages per minute letter as standard.
Options available include an additional Paper Tray, Document Feeder, Foreign Interface,
Stand and Network Kit. The Network Kit enables network printing, including PostScript,
Macintosh and Linux print and scan drivers.
Xerox WorkCentre 4118x
Hereafter the 4118x will be referred to in this documentation as the 4 in 1 model.
The 4 in 1 model provides digital copying, direct printing, fax and direct scanning at 17/18
pages per minute.
Options include an additional Paper Tray, Foreign Interface, Stand, and Network Kit. The
Network Kit enables network printing including PostScript, Macintosh and Linux print and scan
drivers.
z For instructions
on unpacking and
setting up the
machinereadyfor
use the Quick
Install Sheets, or
refer to “Getting
Started” on page
2-1.
Page 1-2
Xerox WorkCentre 4118 User Guide
About This Guide
Throughout this User Guide some terms are used interchangeably:
¾ Paper is synonymous with media.
¾ Document is synonymous with original.
¾ Xerox WorkCentre 4118 is synonymous with the machine.
The following table offers further information about the conventions used within this Guide.
CONVENTION
Italic Typeface
DESCRIPTION
EXAMPLE
Xerox WorkCentre 4118.
Used to emphasize a word or phrase.
In addition, references to other
publications are displayed in Italic
typeface.
Bracket Text Typeface
Notes
Used to emphasize the selection of a ¾ Select the paper supply source
feature mode or key.
required by pressing [Paper
Supply].
z For instructions on loading media, refer
to “Loading Paper” on page 4-2.
Located in the margins and used to
provide additional or useful
information about a function or
feature.
Specification Note
Caution
Provides more in-depth specification
information relating to the machine.
L
For full media specifications refer to
“Media Specifications” on page 11-7.
Cautions are statements that suggest
mechanical damage as a result of an
action.
CAUTION: DO NOT use organic or
strong chemical solvents or
aerosol cleaners or pour fluids
directly onto any area.
Warning
Used to alert users to the possibility of
personal injury.
WARNING: This product must be
connected to a protective earthing
circuit.
Xerox WorkCentre 4118 User Guide
Page 1-3
Customer Support
If you need assistance during or after product installation, please visit the Xerox website for
online solutions and support:
http://www.xerox.com
If you require further assistance, call our experts at the Xerox Welcome Center, or contact your
local representative. When telephoning please provide the machine serial number. Use the
space below to make a note of the machine serial number:
# ____________________________________________
To access the serial number open the side cover using the release latch and then open the
front door. The serial number is located on the panel above the Toner Cartridge.
The Xerox Welcome Center or local representative telephone number is provided when the
machine is installed. For convenience and future reference, please record the telephone
number in the space below:
Xerox Welcome Center or local representative telephone number:
# ____________________________________________
Xerox US Welcome Center:
1-800-821-2797
Xerox Canada Welcome Center: 1-800-93-XEROX (1-800-939-3769)
Xerox WorkCentre 4118 User Guide
Page 1-5
Safety Notes
Read these safety notes carefully before using this product to ensure you operate the
equipment safely.
Your Xerox product and supplies have been designed and tested to meet strict safety
requirements. These include safety agency approval, and compliance to established
environmental standards. Please read the following instructions carefully before operating the
product and refer to them as needed to ensure the continued safe operation of your product.
The safety and environment testing and performance of this product have been verified using
Xerox materials only.
WARNING: Any unauthorized alternation, which may include the addition of new
functions or connection of external devices, may impact the product certification.
Please contact your authorized local dealer for more information.
Warning Markings
All warning instructions marked on or supplied with the product should be followed.
This WARNING symbol alerts users to areas of the product where there is the possibility of
personal injury.
This WARNING symbol alerts users to areas of the product where there are heated surfaces,
which should not be touched.
Electrical Supply
This product shall be operated from the type of electrical supply indicted on the product 's data
plate label. If you are not sure that your electrical supply meets the requirements, please
consult your local power company for advice.
WARNING: This product must be connected to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. This plug will fit only into
an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your
electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use
an earthed adapter plug to connect the product to an electrical outlet that lacks an earth
connection terminal.
Page 1-6
Xerox WorkCentre 4118 User Guide
Operator Accessible Areas
This equipment has been designed to restrict operator access to safe areas only. Operator
access to hazardous areas is restricted with covers or guards which would require a tool to
remove. Never remove these covers or guards.
Maintenance
Any operator product maintenance procedures will be described in the user documentation
supplied with the product. Do not to carry out any maintenance on this product which is not
described in the customer documentation.
Cleaning Your Product
Before cleaning this product, unplug the product from the electrical outlet. Always use
materials specifically designated for this product, the use of other materials may result in poor
performance and may create a hazardous situation. Do not use aerosol cleaners - they may
be explosive and flammable under certain circumstances.
Electrical Safety Information
¾ Only use the power cord supplied with this equipment.
¾ Plug the power cord directly into a grounded electrical outlet. Do not use an extension
cord. If you do not know whether or not an outlet is grounded, consult a qualified
electrician.
¾ This equipment is to be operated from the type of electrical supply indicated on the product
data plate label. If this machine needs to be moved to a different location, contact a Xerox
service representative or your authorized local representative or service support
organization.
¾ Improper connection of the equipment-grounding conductor can result in electrical shock.
-
-
-
-
-
Do not place this equipment where people might step on or trip on the power cord.
Do not place objects on the power cord.
Do not override or disable electrical or mechanical interlocks.
Do not obstruct the ventilation openings.
Never push objects of any kind into slots or openings on this equipment
¾ If any of the following conditions occur, switch off the power to the machine immediately
and disconnect the power cord from the electrical outlet. Call an authorized local service
representative to correct the problem.
-
-
The equipment emits unusual noise or odors.
The power cord is damaged or frayed.
Xerox WorkCentre 4118 User Guide
Page 1-7
-
-
-
-
A wall panel circuit breaker, fuse, or other safety device has been tripped.
Liquid is spilled into the copier/printer.
The equipment is exposed to water.
Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the
machine as a plug-in device. To remove all electrical power from the equipment, disconnect
the power cable from the electrical outlet.
Operational Safety Information
To ensure the continued safe operation of your Xerox equipment, follow these safety
guidelines at all times.
Do These:
Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
¾ This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will fit only
into an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock,
contact your electrician to replace the electrical outlet if you are unable to insert the plug
into it. Never use a plug that lacks an earth connection terminal to connect the product to
an electrical outlet.
¾ Always follow all warnings and instructions that are marked on or supplied with the
equipment.
¾ Always exercise care when moving or relocating equipment. Please contact your local
Xerox Service Department, or your local support organization to arrange relocation of the
product to a location outside of your building.
¾ Always locate the equipment in an area that has adequate ventilation, and the room for
servicing. See Install guide for minimum dimensions.
¾ Always use materials and supplies specifically designed for your Xerox equipment. Use of
unsuitable materials may result in poor performance.
¾ Always unplug this equipment from the electrical outlet before cleaning.
Page 1-8
Xerox WorkCentre 4118 User Guide
Do Not Do These:
¾ Never use a plug that lacks an earth connection terminal to connect the product to an
electrical outlet.
¾ Never attempt any maintenance function that is not specifically described in this
documentation.
¾ This equipment should not be placed in a built-in installation unless proper ventilation is
provided. Please contact your Authorized local dealer for further information.
¾ Never remove covers or guards that are fastened with screws. There are no operator
serviceable areas within these covers.
¾ Never locate the equipment near a radiator or any other heat source.
¾ Never push objects of any kind into the ventilation openings.
¾ Never override or "cheat" any of the electrical or mechanical interlock devices.
¾ Never operate the equipment if you notice unusual noises or odors. Disconnect the power
cord from the electrical outlet and contact your local Xerox Service Representative or
Service Provider immediately.
Maintenance Information
Do not attempt any maintenance procedure that is not specifically described in the
documentation that is supplied with your copier/printer.
¾ Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor
performance of the equipment, and could create a dangerous condition.
¾ Use supplies and cleaning materials only as directed in this manual. Keep all of these
materials out of the reach of children.
¾ Do not remove covers or guards that are fastened with screws. There are no parts behind
these covers that you can maintain or service.
¾ Do not perform any maintenance procedures unless you have been trained to do them by
an authorized local dealer or unless a procedure is specifically described in the user
manuals.
Ozone Safety Information
This product will produce ozone during normal operation. The ozone produced is heavier than
air and is dependent on copy volume. Providing the correct environmental parameters as
specified in the Xerox installation procedure will ensure that the concentration levels meet safe
limits.
Xerox WorkCentre 4118 User Guide
Page 1-9
If you need additional information about ozone, please request the Xerox publication Ozone
by calling 1-800-828-6571 in the United States and Canada. In other markets please contact
your authorized local dealer or Service Provider.
Consumables
Store all consumables in accordance with the instructions given on the package or container.
¾ Keep all consumables away from the reach of children.
¾ Never throw toner, toner cartridges or toner containers into an open flame.
Radio Frequency Emissions
United States, Canada, Europe, Australia/New Zealand
Note: This equipment has been tested and found to comply with the limits for a class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Changes and modifications to this equipment not specifically approved by Xerox may void the
user's authority to operate this equipment.
Laser Safety Information
CAUTION: Use of controls, adjustments or performance of procedure other than those
specified herein may result in hazardous light exposure.
With specific regard to laser safety, the equipment complies with performance standards for
laser product set by government, national and international agencies as a Class 1 laser
product. It does not emit hazardous light, as the beam is totally enclosed during all phases of
customer operation and maintenance.
Page 1-10
Xerox WorkCentre 4118 User Guide
Product Safety Certification
This product is certified by the following Agency using the Safety standards listed.
AGENCY
Underwriters Laboratories Inc.
ETL SEMKO
STANDARD
UL60950-1st Edition (USA/Canada)
IEC60950 1strd Edition (2001)
This product was manufactured under a registered ISO9001 Quality system.
Xerox WorkCentre 4118 User Guide
Page 1-11
Regulatory Information
CE Mark
The CE mark applied to this product symbolizes Xerox's declaration of conformity with the
following applicable Directives of the European Union as of the dates indicated:
January 1, 1995: Council Directive 72/23/EEC amended by Council directive 93/68/EEC,
approximation of the laws of the member states related to low voltage equipment.
January 1, 1996: Council directive 89/336/EEC, approximation of the laws of the member
states related to electromagnetic compatibility.
March 9, 1999: Council Directive 99/5/EC, on radio equipment and telecommunications
terminal equipment and the mutual recognition of their conformity.
A full declaration of conformity, defining the relevant directives and referenced standards, can
be obtained from your Authorized local dealer.
WARNING: In order to allow this equipment to operate in proximity to Industrial
Scientific and Medical (ISM) equipment, the external radiation from the ISM equipment
may have to be limited or special mitigation measures taken.
WARNING: This is a Class A product. In a domestic environment the product may
cause radio frequency interference, in which case the user may be required to take
adequate measures.
FAX Function
USA
FAX Send Header Requirements:
The telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device, including a Fax machine, to send any message unless
such message clearly contains in a margin at the top or bottom of each transmitted page or
on the first page of the transmission, the date and time it is sent and an identification of the
business or other entity, or other individual sending the message and the telephone number
of the sending machine or such business, other entity or individual. (The telephone number
provided may not be a 900 number or any other number for which charges exceed local or
long distance transmission charges.)
Page 1-12
Xerox WorkCentre 4118 User Guide
Data Coupler Information:
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
Administrative Council for Terminal Attachments (ACTA). On the rear of this equipment is a
label that contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the Telephone Company.
A plug and jack used to connect this equipment to the premises wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant.
WARNING: Ask your local Telephone Company for the modular jack type installed on
your line. Connecting this machine to an unauthorized jack can damage Telephone
Company equipment. You, not Xerox, assume all responsibility and/or liability for any
damage caused by the connection of this machine to an unauthorized jack.
You may safely connect the machine to the following standard modular jack: USOC RJ-11C
using the compliant telephone line cord (with modular plugs) provided with the installation kit.
See installation instructions for details.
The Ringer Equivalence Number (or REN) is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a telephone line may result in the
devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be connected to
a line, as determined by the total RENs, contact the local Telephone Company. For products
approved after July 23, 2001, the REN for this product is part of the product identifier that has
the format US: AAAEQ##TXXXX.
For earlier products, the REN is separately shown on the label.
If this Xerox equipment causes harm to the telephone network, the Telephone Company will
notify you in advance that temporary discontinuance of service may be required. But if
advance notice isn't practical, the Telephone Company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe
it is necessary.
The Telephone Company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the Telephone
Company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
If trouble is experienced with this Xerox equipment, for repair or warranty information, please
contact the Xerox Welcome Center telephone number 800-821-2797.
If the equipment is causing harm to the telephone network, the Telephone Company may
request that you disconnect the equipment until the problem is resolved.
Xerox WorkCentre 4118 User Guide
Page 1-13
Repairs to the machine should be made only by a Xerox representative or an authorized Xerox
service agency. This applies at any time during or after the service warranty period. If
unauthorized repair is performed, the remainder of the warranty period is null and void. This
equipment must not be used on party lines. Connection to party line service is subject to state
tariffs. Contact the state public utility commission, public service commission or corporation
commission for information.
If your office has specially wired alarm equipment connected to the telephone line, ensure the
installation of this Xerox equipment does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your Telephone Company or a
qualified installer.
CANADA
This product meets the applicable Industry Canada technical specifications.
'The Ringer Equivalence Number (REN) is an indication of the maximum number of devices
allowed to be connected to a telephone interface. The termination on an interface may consist
of any combination of devices subject only to the requirement that the sum of the RENs of all
the devices does not exceed five. The REN value may be found on the label located on the
rear of the equipment.
Repairs to certified equipment should be made by an authorized Canadian maintenance
facility designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications company cause to
request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe systems, if present, are
connected together. This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but
should contact the appropriate electric inspection authority, or electrician, as
appropriate.
Page 1-14
Xerox WorkCentre 4118 User Guide
EUROPE
Radio Equipment & Telecommunications Terminal Equipment Directive:
This Xerox product has been self-certified by Xerox for pan-European single terminal
connection to the analogue public switched telephone network (PSTN) in accordance with
Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the following countries:
Austria
Belgium
Denmark
France
Italy
Germany
Greece
Iceland
Ireland
Spain
Luxembourg
Netherlands
Norway
Sweden
Switzerland
United Kingdom
Portugal
Finland
Czech Republic Poland
Bulgaria
Romania
In the event of problems you should contact your local Xerox representative in the first
instance. This product has been tested to and is compliant with TBR21, a specification for
terminal equipment for use on analogue-switched telephone networks in the European
Economic Area. The product may be configured to be compatible with other country networks.
Please contact your Xerox representative if it needs to be reconnected to another country's
network. There are no user-adjustable settings in the product.
NOTE: Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling, it is
recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and faster call
setup.
Modification of this product, connection to external control software or to external control apparatus not
authorized by Xerox, will invalidate its certification.
Xerox WorkCentre 4118 User Guide
Page 1-15
Environmental Compliance
USA
Energy Star - As an ENERGY STAR partner, Xerox Corporation has determined that (the
basic configuration of) this product meets the ENERGY STAR guidelines for energy efficiency.
The ENERGY STAR and ENERGY STAR MARK are registered United States trademarks.
The ENERGY STAR Office Equipment Program is a team effort between U.S., European
Union and Japanese governments and the office equipment industry to promote energy-
efficient copiers, printers, fax, multifunction machine, personal computers, and monitors.
Reducing product energy consumption helps combat smog, acid rain and long-term changes
to the climate by decreasing the emissions that result from generating electricity.
Xerox ENERGY STAR equipment is preset at the factory to enter a "low power" state and/or
shut off completely after a specified period of use. These energy-saving features can reduce
product energy consumption in half when compared to conventional equipment.
Canada
Environmental Choice - Terra Choice Environmental Serviced, Inc. of Canada has
verified that this product conforms to all applicable Environmental Choice EcoLogo
requirements for minimized impact to the environment.
As a participant in the Environmental Choice program, Xerox Corporation has determined that
this product meets the Environmental Choice guidelines for energy efficiency.
Environment Canada established the Environmental Choice program in 1988 to help
consumers identify environmentally responsible products and services. Copier, printer, digital
press and fax products must meet energy efficiency and emissions criteria, and exhibit
compatibility with recycled supplies. Currently, Environmental Choice has more than 1600
approved products and 140 licensees. Xerox has been a leader in offering EcoLogo approved
products.
Europe
Energy - Xerox Corporation has designed and tested this product to meet the energy
restrictions required to establish Group for Efficient Appliances (GEA) compliance and have
notified the registration authorities.
Page 1-16
Xerox WorkCentre 4118 User Guide
Illegal Copies
USA
Congress, by statute, has forbidden the reproduction of the following subjects under certain
circumstances. Penalties of fine or imprisonment may be imposed on those guilty of making
such reproductions.
¾ Obligations or Securities of the United States Government, such as:
Certificates of Indebtedness National Bank Currency
Coupons from Bonds
Silver Certificates
Federal Reserve Bank Notes
Gold Certificates
Treasury Notes
United States Bonds
Federal Reserve Notes
Certificates of Deposit
Fractional Notes
Paper Money
Bonds and Obligations of certain agencies of the government, such as FHA, etc.
Bonds. (U.S. Savings Bonds may be photographed only for publicity purposes in
connection with the campaign for the sale of such bonds.)
Internal Revenue Stamps. (If it is necessary to reproduce a legal document on which there
is a canceled revenue stamp, this may be done provided the reproduction of the document
is performed for lawful purposes.)
Postage Stamps, canceled or uncanceled. (For philatelic purposes, Postage Stamps may
be photographed, provided the reproduction is in black and white and is less than 75% or
more than 150% of the linear dimensions of the original.)
Postal money Orders.
Bills, Checks, or Draft of money drawn by or upon authorized officers of the United States.
Stamps and other representatives of value, of whatever denomination, which have been or
may be issued under any Act of Congress.
¾ Adjusted Compensation Certificates for Veterans of the World Wars.
¾ Obligations or Securities of any Foreign Government, Bank, or Corporation.
¾ Copyrighted materials, unless permission of the copyright owner has been obtained or the
reproduction falls within the "fair use" or library reproduction rights provisions of the
copyright law. Further information of these provisions may be obtained from the Copyright
Office, Library of Congress, Washington, D.C. 20559. Ask for Circular R21.
Xerox WorkCentre 4118 User Guide
Page 1-17
¾ Certificates of Citizenship or Naturalization. (Foreign Naturalization Certificates may be
photographed.)
¾ Passports. (Foreign Passports may be photographed.)
¾ Immigration Papers.
¾ Draft Registration Cards.
¾ Selective Service Induction Papers that bear any of the following Registrant's information:
Earnings or Income
Court Record
Dependency Status
Previous military service
Physical or mental condition
Exception: United States military discharge certificates may be photographed.
¾ Badges, Identification Cards, Passes, or Insignia carried by military personnel, or by
members of the various Federal Departments, such as FBI, Treasury, etc. (unless
photograph is ordered by the head or such department or bureau.)
Reproducing the following is also prohibited in certain states:
Automobile Licenses - Drivers' Licenses - Automobile Certificates of Title.
The above list is not all inclusive, and no liability is assumed for its completeness or accuracy.
In case of doubt, consult your attorney.
Canada
Parliament, by statute, has forbidden the reproduction of the following subjects under certain
circumstances. Penalties of fine or imprisonment may be imposed on those guilty of making
such reproductions.
¾ Current bank notes or current paper money.
¾ Obligations or securities of a government or bank.
¾ Exchequer bill paper or revenue paper.
¾ The public seal of Canada or of a province, or the seal of a public body or authority in
Canada, or of a court of law.
¾ Proclamations, orders, regulations or appointments, or notices thereof (with intent to
falsely cause same to purport to have been printed by the Queen's Printer for Canada, or
the equivalent printer for a province).
¾ Marks, brands, seals, wrappers or designs used by or on behalf of the Government of
Canada or of a province, the government of a state other than Canada or a department,
board, Commission or agency established by the Government of Canada or of a province
or of a government of a state other than Canada.
Page 1-18
Xerox WorkCentre 4118 User Guide
¾ Impressed or adhesive stamps used for the purpose of revenue by the Government of
Canada or of a province or by the government of a state other than Canada.
¾ Documents, registers or records kept by public officials charged with the duty of making or
issuing certified copies thereof, where the copy falsely purports to be a certified copy
thereof.
¾ Copyrighted material or trademarks of any manner or kind without the consent of the
copyright or trademark owner.
The above list is provided for your convenience and assistance, but it is not all-inclusive, and
no liability is assumed for its completeness accuracy. In case of doubt, consult your solicitor.
Other countries
Copying certain documents may be illegal in your country. Penalties of fine or imprisonment
may be imposed on those found guilty of making such reproductions.
¾ Currency notes
¾ Bank notes and cheques
¾ Bank and government bonds and securities
¾ Passports and identification cards
¾ Copyright material or trademarks without the consent of the owner
¾ Postage stamps and other negotiable instruments
This list is not inclusive and no liability is assumed for either its completeness or accuracy. In
case of doubt, contact your legal counsel.
Xerox WorkCentre 4118 User Guide
Page 1-19
Product Recycling and Disposal
If you are managing the disposal of your Xerox product, please note that the product contains
lead, mercury, and other materials whose disposal may be regulated due to environmental
considerations in certain countries or states. The presence of lead and mercury is fully
consistent with global regulations applicable at the time that the product was placed on the
market.
European Union:
Some equipment may be used in both a domestic/household and a professional/ business
application.
Domestic/Household Environment
Application of this symbol on your equipment is confirmation that you
should not dispose of the equipment in the normal household waste
stream.
In accordance with European legislation end of life electrical and electronic
equipment subject to disposal must be segregated from household waste.
Private households within EU Member States may return used electrical
and electronic equipment to designated collection facilities free of charge.
Please contact your local disposal authority for information.
In some Member States when you purchase new equipment your local
retailer may be required to take back your old equipment free of charge.
Please ask your retailer for information.
Professional/Business Environment
Application of this symbol on your equipment is confirmation that you must
dispose of this equipment in compliance with agreed national Procedures.
In accordance with European legislation end of life electrical and electronic
equipment subject to disposal must be managed within agreed
procedures.
Prior to disposal please contact your local dealer or Xerox representative
for end of life take back information.
Page 1-20
Xerox WorkCentre 4118 User Guide
North America
Xerox operates an equipment takeback and reuse/recycle program. Contact your Xerox sales
representative (1-800-ASK-XEROX) to determine whether this Xerox product is part of the
program. For more information about Xerox environmental programs, visit www.xerox.com/
environment or for recycling and disposal information, contact your local authorities. In the
United States, you may also refer to the Electronic Industries Alliance web site: www.eiae.org.
Other Countries
Please contact your local waste authorities and request disposal guidance.
Xerox WorkCentre 4118 User Guide
Page 1-21
Page 1-22
Xerox WorkCentre 4118 User Guide
2 Getting Started
unpack and setup your machine.
¾ Powering On the Machine . . . . . . . . . . . . . . . . . . 2-16
¾ Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
¾ Machine Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
¾ Installing Software . . . . . . . . . . . . . . . . . . . . . . . . 2-24
Xerox WorkCentre 4118 User Guide
Page 2-1
Unpacking
¾ Remove the shipping tape from
the front, back and sides of the
machine.
1
Tape
LCD
2
z To scan or copy a
document, the
switch must be in
the unlock
¾ Remove the label completely
from the scanner module by
pulling it straight out, away from
the unit.
position. If the
machine is not
being used for a
long period of
time, or being
moved, push the
switch to the lock
Make sure that the scan lock has
been moved to the unlock
position (
).
position (
).
Scanner
Module
¾ Pull open the paper tray and
remove the packing material from
the tray.
3
Page 2-2
Xerox WorkCentre 4118 User Guide
4
z The appearance
of the power cord
andthetelephone
line cord may
¾ Ensure the following components
are available:
vary according to
Country.
User
Documentation
AC Power Cord
Drum Cartridge
Starter Toner Cartridge
USB Cable
Telephone Line Cord
Software
CD Contents
User Guide CD
¾ The User Guide provides detailed information, technical specifications and procedural step
by step instructions on all the features available.
Xerox WorkCentre 4118 User Guide
Page 2-3
Drivers CD
¾ This CD contains the print drivers, TWAIN driver and ControlCentre software available for
your machine.
¾ Print Drivers are available for Windows 98, NT, 2000, ME and XP. Print Drivers are
available in PCL5e emulation, PCL6.
¾ The TWAIN Driver is the interface between your machine and the image manipulation
software. TWAIN Driver available for Windows 98, NT, 2000, ME and XP.
¾ The WIA Driver allows you to scan and manipulate images without using additional
software (XP only).
¾ The ControlCentre software allows you to set the machine’s fax number and phonebook
entries. Also use ControlCentre to upgrade the machine’s firmware.
Nuance CD
¾ This CD contains the PaperPort SE 10.0 and OmniPage 4.0 SE software available when
scanning from your machine. You will receive 1 CD containing different languages.
¾ PaperPort SE 10.0 is image manipulation software that has a variety of features.
¾ OmniPage 4.0 SE is an Optical Character Recognition (OCR) software that converts the
scanned image into editable text documents.
IMPORTANT RESTRICTION: THE FOLLOWING PROVISION FORMS PART OF THE
LEGALLY BINDING AGREEMENT UNDER WHICH YOU ARE LICENSED TO USE THE
SOFTWARE CONTAINED IN THIS PACKAGE. BY INSTALLING, COPYING OR USING THE
SOFTWARE, YOU AGREE TO BE LEGALLY BOUND BY THE FOLLOWING. IF YOU DO
NOT AGREE WITH THE FOLLOWING, DO NOT INSTALL, COPY OR USE THE
SOFTWARE:
This package contains multiple language versions of [PaperPort 10 SE; OmniPage SE
v4.0; Image Retriever]. This software is licensed on a single Seat basis only; that is, the
software (regardless of language version) may only be used by you on or from a single
Seat. A "Seat" means each computer (a) on which the software or a portion of the
software is either installed or run, or (b) from which the software is accessed.
Page 2-4
Xerox WorkCentre 4118 User Guide
CD Installation
Insert the appropriate CD into your CD-ROM drive. Use the instructions below to run the
required CD.
User Guide CD
¾ The program is designed to Autorun. If this is not enabled double-click on the run.exe file
on the CD.
1
12
¾ Select your preferred language.
Drivers CD
¾ The program is designed to Autorun. If this is not enabled double-click on the Xinstall.exe
file on the CD.
1
12
¾ Follow the instructions in the wizard to install the required application. Multiple applications
can be installed on your PC.
Refer to “Installing Drivers” on page 2-24 for further information.
)
Nuance CD
The program is designed to Autorun. If this is not enabled double-click on the install.exe file
on the CD.
Xerox WorkCentre 4118 User Guide
Page 2-5
Machine Overview
Models and Options
WorkCentre 4118 (2 in 1) WorkCentre 4118 (4 in 1)
Option
Standard
Standard
Document Feeder
Standard
Paper Tray 1 & Bypass
Tray
Standard
Standard
Option
-
Standard
Standard
Option
Digital Copying
Direct Printing
Network Printing
Direct Scanning
Fax
Standard
Standard
Option
-
Option
Option
Option
Paper Tray 2
Option
Cabinet and Stand
Foreign Interface
Option
Page 2-6
Xerox WorkCentre 4118 User Guide
Component Location
Front View:
Document
Guides
Document Input
Document Feeder
Tray
Document
Output Tray
Paper Guides
Control Panel
Bypass Tray
Side Cover
Scanner
Module
Paper
Tray 1
Release Lever
Front Cover
Paper Tray 2
NOTE: The components on each model vary, this picture represents the WorkCentre 4118 with the
optional Paper Tray 2.
Xerox WorkCentre 4118 User Guide
Page 2-7
Rear View:
Document Feeder
Document Feeder
Connector
Document Glass
Telephone Connections
Paper Tray
AC Power Cord
Connector
Paper Exit Extension
Power Switch
Parallel Connector
USB Connector
NOTE: The components on each model vary, this picture represents the WorkCentre 4118, standard
configuration.
Page 2-8
Xerox WorkCentre 4118 User Guide
Control Panel Overview
Status keys
Navigation keys
Clear / Clear All (AC)
Copy key
Display
Menu/Exit
1
2
3
5
6
4
Enter
Status Map
Paper Supply
Numeric
Keypad
Start
Stop
Feature
keys (1 - 7)
2 in 1 Control panel
Copy/fax keys
Status keys
Navigation keys
Display
Clear / Clear All (AC)
Menu/Exit
1
2
3
5
4
6
7
Enter
Status Map
Paper Supply
Feature
keys (1 - 7)
Numeric
Keypad
Start
Stop
Fax
Functions
4 in 1 Control panel
ITEM
Lighten/Darken
DESCRIPTION
Use to adjust the contrast level to improve output quality.
1
2
Reduce/Enlarge Use to adjust copy size from 25% to 400% when using the Document
Glass, and 25% to 100% using the Document Feeder.
Xerox WorkCentre 4118 User Guide
Page 2-9
3
4
5
6
7
1-2 Sided
Collated
Use to scan 1 Sided originals and produce 2 Sided output.
Use to produce collated output.
Original Type
Color Original
Resolution
Copy
Used to select the type of original being scanned.
Use this option when scanning a color original.
Use to adjust the scan resolution (4 in 1 only).
Select to activate the Copy mode. The Copy key illuminates when
selected.
Fax
Menu/Exit
Enter
Select to activate the Fax mode. The Fax key illuminates when selected (4
in 1 only).
Use to access the menu functions and also to move up through the menu
levels.
Use to confirm the selection on the display.
Navigation Keys
Use to scroll through the menu items and the options available for each
menu item.
Paper Supply
Use to select a paper type and source. Each press of the Paper Supply key
changes the selection. The Status Map indicates the selected tray.
NOTE: Paper Tray 2 is available as an option.
Status Map
The Status Map identifies which paper tray is selected, when a paper tray
is empty and when an error occurs.
Bypass
The Status Map has a light for each paper tray. A paper tray can be
selected using the Paper Supply key. Each time the key is pressed, a
different tray is selected and a green light displays to indicate the selected
tray. When two tray lights display together, the Auto Tray Switching feature
is active. This enables the machine to switch to a different tray if the current
tray runs out of paper.
Paper
Jam
Tray 1
Tray 2
If a paper tray is empty, the light will flash and if enabled, an error tone will
sound.
If an error occurs, a red light displays and a message appears on the
display providing further information.
For a detailed description of the error messages, refer to “LCD Error
)
Messages” on page 10-11.
Page 2-10
Xerox WorkCentre 4118 User Guide
Display
Displays the current status and the menu prompts and selections.
Job Status
Use to view the current job status, add pages to jobs in memory and to
delete jobs.
Machine Status
Manual Group
Manual Dial
Use to access setup menus and customize the machine.
Use to manually enter multiple destinations for a fax job (4 in 1 only).
Use to dial a fax number manually (4 in 1 only).
Speed Dial
Use to dial fax numbers and send faxes by entering a Speed Dial number
which has been set up previously and stored in the machine’s Dial
Directory (4 in 1 only).
Pause/Redial
Use to redial the last phone number called or to add a pause when storing
a number in the dial directory (4 in 1 only).
Numeric Keypad
Start
Use to enter alphanumeric characters.
Use to activate a job.
Stop
Use to stop an operation at any time.
Clear/Clear All (AC)
Press once to clear a current entry e.g. an incorrect number or character
entry. Press twice to clear all programmed settings, the display requests
confirmation.
Xerox WorkCentre 4118 User Guide
Page 2-11
Installing Drum and Toner Cartridges
¾ Pull the release latch to open the
1
side cover.
CAUTION: Ensure the side cover
is always open before opening
the front cover.
¾ Open the front cover.
2
¾ If the cartridge locking lever is in
3
the lower position, turn the lever
upward until it locks into place.
Page 2-12
Xerox WorkCentre 4118 User Guide
¾ Remove the drum cartridge from
its bag and slide it into the
machine firmly until it locks into
place.
4
5
CAUTION: Do not expose the
green drum to light for an
extended period. Never expose
the drum to direct sunlight or
touch the drum surface. Damage
or poor image quality may result.
z Xerox
¾ Remove the starter toner
has included a
Starter Toner
Cartridge.
cartridge from its bag.
¾ Gently shake the cartridge to
Purchased
loosen the toner.
replacement
toner cartridges
will yield
approximately
two times the
number of copies.
Shaking the cartridge will ensure
maximum copies per cartridge.
¾ Slide the toner cartridge into the
machine, aligning the cartridge to
the left of the slot, until it locks
into place.
6
7
z Whenthe drumor
toner cartridge
need to be
¾ Turn the cartridge locking lever
downwards until it locks in place.
replaced a
message
displays.
¾ Close the front cover and the side
cover.
Xerox WorkCentre 4118 User Guide
Page 2-13
Making Connections
Document Feeder
1
¾ Connect the Document Feeder
cord to the port shown and fasten
the side screws.
Telephone Line (WorkCentre 4118, 4 in 1 only)
2
z You should use
the telephone line
cord which is
¾ Connect the supplied telephone
line to the LINE jack and the other
end to the wall jack.
suppliedwithyour
machine. If you
are replacing it
with another
If you want to use your machine
for receiving both faxes and voice
calls, you will need to connect a
telephone and/or answering
machine.
vendor’s, it
should be AWG
#26 or larger tele-
communication
line cord.
¾ If required, plug the cord of your
extension phone into the EXT
jack.
Page 2-14
Xerox WorkCentre 4118 User Guide
USB or Parallel Port Cable
3
CAUTION: Shut down the
computer before connecting the
cable.
¾ Connect the USB Cable which
came with your machine.
OR
¾ If you want to use a parallel print
cable, only use an IEEE-1284
compliant cable and connect it to
the parallel connector on your
machine.
Only connect one of the above cables. If you are using a USB cable, you must be running
)
Windows 98, Me, 2000 or XP. When using the USB connection, your machine provides two USB
modes; Fast and Slow. Fast is the default mode. Some PC User’s may experience poor
functionality in the default mode. If this occurs, select the Slow mode. For information about
changing the USB mode, refer to “Machine Setup” on page 2-20.
Xerox WorkCentre 4118 User Guide
Page 2-15
Loading Paper
1
z An additional
¾ Pull open the Paper Tray.
Paper Tray is
available as an
option. The
instructions for
loading both
paper trays are
the same.
¾ Push down on the pressure plate
until it locks into position.
2
3
¾ Adjust the rear paper guide to the
required paper length.
It is preset to A4 or Letter size
depending on country.
¾ To load another size, lift the rear
guide out of the current position
and into the required position.
Rear
Guide
L
The Paper Trays can hold a
maximum of 550 sheets of 80 g/m²
(20 lb) plain paper. You can use
A4, Folio, Letter or Legal size
paper only.
Xerox WorkCentre 4118 User Guide
Page 2-17
4
z If you experience
problems with
paper feed, turn
the paper around
and if the problem
continues, use
¾ Fan the paper and insert it into
the tray.
If loading Letterhead, ensure the
design is face-up and the top
edge of the sheet is placed at the
right side.
the Bypass Tray.
¾ Ensure that the paper is
positioned under the snubbers.
5
Corner
snubbers
¾ Do not fill above the Maximum Fill
Line.
Max Fill
Line
Page 2-18
Xerox WorkCentre 4118 User Guide
6
z When printing
¾ Position the side guide by
squeezing the lever and sliding it
toward the stack of paper, until it
gently touches the side of the
stack.
from your PC,
ensure you select
the Paper Source
and the correct
paper size from
your software
application.
against the edge of the paper
tightly.
¾ Close the Paper Tray.
Refer to “Machine Setup” starting on page 2-20 to set the correct size for the Paper Tray.
)
For more detailed information about Paper Supply, refer to the Chapter “Paper and Other Media”
starting on page 4-1.
Xerox WorkCentre 4118 User Guide
Page 2-19
Machine Setup
Use the following instructions to customize your machine to meet your individual
requirements.
¾ Press the [Machine Status] key.
1
Enter Machine
Status
¾ Using the Navigation Keys select [Machine Setup] and press [Enter].
2
3
¾ Using the Navigation Keys select the required setup option and press [Enter].
¾ Using the “Machine Setup Options” starting on page 2-21 customize the settings to meet
your requirements.
¾ Press [Enter] to save your selections.
¾ Press [Menu/Exit] to exit each menu level and return to standby mode.
4
Page 2-20
Xerox WorkCentre 4118 User Guide
Machine Setup Options
OPTION
SETTINGS
DESCRIPTION
Tray 1 Size
Tray 2 Size
Bypass Size
LTR / A4 / LGL / Folio Use to set the default paper size for Tray 1.
Paper Size options are Letter, A4, Legal (216 x
356 mm / 8.5 x 14 inch) or Folio.
LTR / A4 / LGL / Folio Use to set the default paper size for Tray 2.
Paper Size options are Letter, A4, Legal (216 x
356 mm / 8.5 x 14 inch) or Folio.
LTR / A4 / LGL / Folio / Use to set the default paper size for the Bypass
A5 / Statement
Tray. Paper Size options are Letter, A4, Legal
(216 x 356 mm / 8.5 x 14 inch), Folio, A5 or
Statement.
L
If feeding media smaller than A4/Letter through
the bypass tray, the setting can remain set at
A4, Letter or Legal size.
When copying onto a paper size smaller than
A4/Letter, the printed image may be offset and
not reproduce correctly, even when Auto Fit is
selected.
Collated
On
Off
Use to produce sets in the order 1,2,3 / 1,2,3 /
1,2,3.
Use to produce stacks in the order 1,1,1 / 2,2,2
/ 3,3,3.
Power Save
On
Off
Use to enable the Power Save feature. If On is
selected, set the period of time the machine
waits before Power Save is activated. Choose
between 15, 30, 60, 120 minutes.
Machine Time Out
Stamp RX Name
15 / 30 / 60 / 180
Seconds
Sets the number of seconds the machine
remains idle before the current job settings are
reset back to the default settings. Use Off to
deactivate the option.
Off
On
Off
Set to On to enable sender information, the
machine ID, the page number, the date and
time of reception and the reduction rate of the
image to be printed on each page of each
received transmission. The information is
printed on the bottom edge of each page.
Xerox WorkCentre 4118 User Guide
Page 2-21
OPTION
Alarm Sound
SETTINGS
On
DESCRIPTION
Set to On to enable an alarm sound when an
error occurs or a fax communication ends.
Off
Key Sound
On
Set to On to enable a sound when any key is
pressed.
Off
Speaker Control
Low
Med
High
Off
The speaker can be set to Low, Medium High
or Off.
English, French, German,
Italian, Spanish, Brazilian
Portuguese, Dutch, Danish,
Swedish, Finnish, Norwegian,
Russian
Language
The display uses the language selected.
Localization
Inch
MM
Use to set whether measurements are
displayed and entered in inches or millimeters.
UK, Greece, Turkey, Ukraine,
Slovenia, Russia, Yugoslavia,
Australia, Hong Kong, New
Zealand, South Africa, Israel,
Korea, K.Xerox, China, India,
Asia_STD, Malaysia,
Select Country
Setting the Country option sets the correct fax
communication settings for each country.
Singapore, USA/Canada,
Brazil, Chile, Columbia,
Mexico, Argentina, Peru,
Germany, France, Austria,
Switzerland, Italy, Spain,
Portugal, Norway, Finland,
Sweden, Netherlands,
Denmark, Belgium, Hungary,
Poland, Czech, Romania,
Bulgaria, Ireland
USB Mode
Machine ID
Fast
Use to set the USB speed. Fast is the default
mode. Some PC users may experience poor
USB implementation in the default mode. If this
occurs, select Slow.
Slow
Fax
Use to enter the fax number and name of the
machine.
Name
Page 2-22
Xerox WorkCentre 4118 User Guide
OPTION
Date & Time
SETTINGS
DESCRIPTION
Enter the current date and time using the
Numeric Keypad. Use Clock Mode to set
whether the machine uses a 12 or 24 hour
clock.
Clock Mode
Toner Save
12 hour
24 hour
On
The machine can be configured to display time
using either a 12-hour or 24-hour format.
If On, the machine produces a lower quality
output to reduce toner consumption. Useful if
your machine is used for internal documents
only.
Off
Discard Size
[00 - 30]
If the Fax Setup option Auto Reduction is set to
Off, and the received document is as long or
longer than the paper selected, the machine
will discard any excess image from the bottom
of the page that is longer than the selected
length.
If the received page is outside the discard
margin set, it will print on two sheets of paper at
the actual size. Margins can be set between 0 -
30mm (1.2").
Xerox WorkCentre 4118 User Guide
Page 2-23
Installing Software
Installing Drivers
Programs for Windows
To use your machine as a printer and scanner in Windows, you must install the MFP driver.
You can install some or all the following components:
¾ Printer driver - Use this driver to take full advantage of your printer’s features. The PCL
Print driver is standard. The PostScript driver is available with the optional Network Kit.
¾ Scan driver - TWAIN and Windows Image Acquisition (WIA) driver is available for
scanning documents on your machine (4 in 1 only).
¾ ControlCentre - Use this program to create phonebook entries (4 in 1 only), edit printer
settings and upgrade machine firmware.
Macintosh Driver
You can print and scan to and from Macintosh operating systems using your machine. This
driver is available with the optional Network Kit.
Linux Driver
You can print and scan to and from Linux operating systems using your machine. This driver
is available with the optional Network Kit.
System Requirements
Your machine supports the following operating systems.
Windows 98/Me/NT 4.0/2000/XP
The following table shows Windows requirements.
ITEM
CPU
REQUIREMENTS
Windows 98/Me/NT 4.0/ Pentium II 400 MHz or
RECOMMENDED
Pentium III 933 MHz
2000
higher
Windows XP
Pentium III 933 MHz or
higher
Pentium IV 1 GHz
Page 2-24
Xerox WorkCentre 4118 User Guide
ITEM
RAM
REQUIREMENTS
RECOMMENDED
Windows 98/Me/NT 4.0/
64 MB or higher
128 MB
2000
Windows XP
128 MB or higher
300 MB or higher
256 MB
1 GB
Free disk
space
Windows 98/Me/NT 4.0/
2000
Windows XP
5.0 or higher
1 GB or higher
5 GB
5.5
Internet
Explorer
Macintosh
Macintosh 10.3 or later - with Network Kit option
Linux
Various Linux - with Network Kit option.
Installing Drivers in Windows
All applications should be closed on your PC before beginning installation.
Installing Xerox Drivers in Microsoft Windows XP or Windows 2000
using the USB port
¾ Insert the Xerox Drivers CD into the CD-ROM drive.
1
2
¾ When the language selection window appears, select the appropriate language.
Xerox WorkCentre 4118 User Guide
Page 2-25
¾ Choose the appropriate radio button for the hardware selected and then click [Next].
3
4
¾ Choose the components you want to install and then click [Next].
¾ The confirmation screen summarizes your selections. Either Click [Back] to reselect or
Click [Next] to install your selections.
5
6
¾ When the setup has completed click [Finish].
Page 2-26
Xerox WorkCentre 4118 User Guide
¾ Plug the USB cable into the WorkCentre 4118 and connect it to your Personal Computer
(PC).
7
8
¾ The Hardware Wizard will search for and find the drivers. Follow the on screen
instructions.
Installing Xerox Drivers in Microsoft Windows XP, 2000, NT or Windows
98/ME using the Parallel port
¾ Plug the Parallel cable into the WorkCentre 4118 and connect it to your PC. Start your PC
and switch on the WorkCentre 4118.
1
2
¾ Insert the Xerox Drivers CD into the CD-ROM drive. In Microsoft Windows click [Start] and
then [Run]. Type [E:\Xinstall.exe], replacing "E" with the letter of your CD-ROM drive and
click [OK].
¾ When the language selection window appears, select the appropriate language.
3
¾ Choose the appropriate radio button for the WorkCentre you have and select [Next].
4
Xerox WorkCentre 4118 User Guide
Page 2-27
¾ Choose the components you want to install and then click [Next].
5
6
¾ The confirmation screen summarizes your selections. Either Click [Back] to reselect or
Click [Next] to install your selections.
¾ Click [Finish]. The driver installation is now complete.
7
Page 2-28
Xerox WorkCentre 4118 User Guide
Installing Xerox Drivers in Microsoft Windows 98 or Windows
Millennium using the USB port
¾ Plug the USB cable into the WorkCentre 4118 and connect it to your Personal Computer
(PC). Start your PC and switch on the WorkCentre 4118.
1
2
3
4
¾ Insert the Xerox Drivers CD into the CD-ROM drive.
¾ The Add New Hardware Wizard will display. Click [Next].
¾ Confirm that the radio button Search for the best driver for your device is chosen. Click
[Next].
i
In Windows Millennium (ME) the add Hardware Wizard will search and find the scan
driver. Click [Finish] when this process is complete. Windows ME will then display the
Add New Hardware Wizard for the print driver, click [Next]. Click [Finish] when this
process is complete. The drivers are installed and you can skip to step 9.
ii In Windows 98 you must specify the location. Browse to the CD-ROM drive and the
"Usb" folder on the CD and click [OK]. Click [Next] when prompted then [Finish]. The
USB composite driver is then loaded.
¾ The Add New Hardware Wizard will display. Click [Next] to install the USB hardware driver
for the WorkCentre 4118.
5
6
¾ You must specify the location. Browse to the CD-ROM drive and the "Usb" folder on the
CD and click [OK]. Click [Next] when prompted then click [Finish].
The USB hardware driver for the WorkCentre 4118 is now loaded.
¾ The Add New Hardware Wizard will display. Click [Next] to install the Scan driver for the
WorkCentre 4118.
7
Xerox WorkCentre 4118 User Guide
Page 2-29
¾ Again, you must specify the location. Browse to the CD-ROM drive and the Driver folder
on the CD. Then click the scan directory and then the Win98ME directory and click [OK].
Click [Next] when prompted then click [Finish].
8
The scan driver for the WorkCentre 4118 is now loaded.
¾ In Microsoft Windows click [Start] and then [Settings] and then [Printers]. Double-click the
[Add Printer] icon.
9
¾ The Add Printer Wizard will begin. Click [Next]. Choose Local Printer and click [Next].
10
¾ At the next screen click [Have Disk], and browse to your CD-ROM drive. Open the Driver
directory, then open the Print directory, then open the AddPrint directory and them choose
the Win9x directory and click [OK].
11
12
¾ The next screen will display the Xerox WorkCentre 4118 driver, click [Next].
Page 2-30
Xerox WorkCentre 4118 User Guide
¾ Click the port that the printer cable is attached to, in this case USB and click [Next].
13
¾ You can type in a name for your new printer or accept the default then click [Next].
14
15
¾ Choose [Yes] to print a test page and click [Finish].
The WorkCentre 4118 driver will now be installed and a test page should print.
Xerox WorkCentre 4118 User Guide
Page 2-31
Test Print or Scan
To ensure the WorkCentre 4118 has been installed correctly a test print or scan should be
submitted from the Workstation. Use the following instructions to send a test print or scan.
Test Print
¾ Open a document on the Workstation.
1
2
3
¾ Select the Xerox WorkCentre 4118 as the printer to which the document will be sent.
¾ Print the selected document on the device and verify that it prints correctly.
The installation process is now complete.
Test Scan
¾ Open the Twain compliant application being used to scan documents.
1
2
¾ Follow the instructions provided in “Scan (4 in 1 only)” starting on page 7-1 to scan a
document and verify that it scans correctly.
The installation process is now complete.
Page 2-32
Xerox WorkCentre 4118 User Guide
3 Copy
WorkCentre 4118.
¾ Copying Procedure . . . . . . . . . . . . . . . . . . . . . . . . 3-2
¾ Basic Copy Features . . . . . . . . . . . . . . . . . . . . . . . 3-6
¾ Special Copy Features . . . . . . . . . . . . . . . . . . . . . 3-9
¾ Compatible Features . . . . . . . . . . . . . . . . . . . . . . 3-13
Xerox WorkCentre 4118 User Guide
Page 3-1
Copying Procedure
Select Copy Mode
1
¾ Ensure Ready to Copy displays.
Ready To Copy
100%
001
Current Reduction /
Number of Copies
Enlarge Setting
Copy Key
¾ If necessary, press the [Copy]
key to change to Copy mode.
The Copy key remains
illuminated when selected.
Select the Paper Supply
z For instructions
on loading media,
refer to “Loading
Paper” on page 4-
2.
¾ To select a paper tray, press the
[Paper Supply] key until the
required tray is lit on the Status
Map.
For full media
specifications
refer to “Media
Specifications”on
page 11-7.
Tray 1 and the Bypass Tray are
available as standard, Tray 2 is
optional.
If two tray lights display together,
the Auto Tray Switching feature is
active. When one tray runs out of
paper, the machine will switch to
the other selected tray.
Status Map
Paper Supply
Page 3-2
Xerox WorkCentre 4118 User Guide
When copying onto a paper size smaller than A4/Letter, the printed image may be offset and not
reproduce correctly, even when Auto Fit is selected.
)
¾ If the Bypass Tray is selected the
Paper Type option displays. Use
the Navigation Keys to select the
Paper Type being loaded and
press [Enter].
If using the Bypass, remember to
load the required stock.
Navigation Keys
Enter
Load the Originals
3
Document Feeder: (optional on the 2 in 1)
¾ Remove all staples and paper
clips prior to loading.
¾ Adjust the sliding document
Document
Guides
guides to the size required.
¾ Insert the originals neatly into the
Document Feeder, face up.
The first page should be on top
with the headings towards the
back or left of the machine.
rear edges of the tray. Adjust the
guides to just touch the edges of
the originals.
L
Up to 40 sheets of 80 g/m² (20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m²
(12.5 - 28lb). Sizes range from B5 to Legal (7” x 10” to 8.5” x 14” ). Refer to “Scanner and Copier
Specifications” on page 11-5 for full Document Feeder specifications.
Xerox WorkCentre 4118 User Guide
Page 3-3
Document Glass:
z When using the
Document Glass,
ensure there are
no documents in
the Document
Feeder.
¾ Raise the Document Feeder or
Document Cover and position the
original face down on the
Document Glass.
Align with the registration arrow in
the rear left corner.
Leaving the
Document
Feeder open
while scanning
will affect the
image quality and
toner
¾ Lower the Document Feeder or
Document Cover.
consumption.
Select the Copy Features
4
z Only those
features relevant
to the machine
configuration will
be available.
¾ Press the Copy feature key
Lighten/Darken
Original Type
jobs are Lighten/Darken, Reduce/
Enlarge, 1-2 Sided, Collated,
Reduce/
Enlarge
Original Type and Color Original.
1-2 Sided
Collated
For information about all the
available Copy features, refer to
“Basic Copy Features” on page
3-6, and “Special Copy
)
Color Original
Features” on page 3-9.
¾ Using the Navigation Keys, select
the setting required for the
feature and press [Enter].
Page 3-4
Xerox WorkCentre 4118 User Guide
Enter the Quantity
5
z The maximum
¾ Use the Numeric Keypad to enter
copy quantity is
999.
the number of copies required.
¾ If necessary, press [Clear/Clear
All] to clear the current quantity
and enter a new quantity.
Numeric Keypad
Clear/Clear All
6
z You can cancel a
copy job while it is
copying by
pressing the
[Stop] key twice.
Press Start
¾ Press [Start] to begin the copy
job.
¾ If the Document Glass is used
and Collated is On, and a quantity
higher than 1 has been entered,
the [Scan Another?] option
displays.
Navigation Keys
Start
¾ To scan another original, load the
next original and using the
Navigation Keys select [Yes] and
press [Enter].
Continue the procedure until all
the originals have been scanned.
¾ Select [No] when all the originals
have been scanned, and press
[Enter].
Printing commences and copies
are delivered to the Output Tray.
Xerox WorkCentre 4118 User Guide
Page 3-5
Basic Copy Features
There are seven basic Copy features available. These features can be selected using the
feature keys located on the Control Panel.
Lighten/Darken
Original Type
Reduce/
Enlarge
1-2 Sided
Collated
Color Original
Feature Description
FEATURE
OPTIONS
INSTRUCTIONS
Lighten/Darken 5 Contrast Settings
¾ Press [Copy].
¾ Press [Lighten/Darken].
z Useto adjust the
contrast for a
document
¾ Using the Navigation Keys select a contrast
containing faint
or dark images.
setting.
Each time the key is pressed the selection block
on the display moves to the left or right. As the
selection block moves to the right the contrast
becomes darker.
¾ Press [Enter] to save the selection.
Reduce/Enlarge 25 - 400% Reduce/Enlarge from 25 - ¾ Press [Copy].
400% using the
Document Glass, and
from 25 - 100% using the ¾ Enter the percentage required using the Numeric
Document Feeder.
¾ Press [Reduce/Enlarge].
z Use to reduce or
enlarge an
image from 25%
to 400%,
depending on
the input area
used.
Keypad. The selected number displays.
¾ Press [Enter] to save the selection.
Page 3-6
Xerox WorkCentre 4118 User Guide
Clone
Use to print multiple
images on a single sheet
of paper. The number of
images produced is
determined automatically
based on the original
image size.
¾ Press [Copy].
¾ Press [Reduce/Enlarge].
¾ Using the Navigation Keys, select [Clone] and
press [Enter].
Clone displays.
z Only available using the
Document Glass, ensure
the Document Feeder is
empty.
Auto Fit Use to reduce or enlarge ¾ Press [Copy].
the image to fit the paper
size automatically.
¾ Press [Reduce/Enlarge].
¾ Using the Navigation Keys, select [Auto Fit] and
z Only available using the
Document Glass, ensure
the Document Feeder is
empty.
press [Enter].
Auto Fit displays.
1-2 Sided
1-1 Sided Use when originals are
printed on 1 side and 1-
¾ Press [Copy].
¾ Press [2 Sided].
z Use to produce
1 or 2 sided copy
output from 1
sided copies are required.
¾ Use the Navigation Keys to select the option
1-2 Sided Use when originals are
sided originals.
required and press [Enter] to save the selection.
Long
printed on 1 side only and
2 Sided copies, with the
conventional "head to
¾ If necessary, use the [Scan Side 2] option to scan
side 2. Position side 2 on the Document Glass
and select [Yes] then [Enter] to scan side 2.
head" layout are required.
¾ Continue the procedure until all the originals have
1-2 Sided Use when originals are
been scanned.
Short
printed on 1 side only and
2 Sided copies, with the
"head to toe" layout are
required.
¾ Select [No] when all the originals have been
scanned, and press [Enter].
Collated
On
Use to produce collated
output e.g. 2 copies of a 3
page job will print one
complete document,
¾ Press [Copy].
¾ Press [Collated].
z Use to produce
collated copy
sets.
¾ Use the Navigation Keys to select [On] and press
followed by the second
complete document.
[Enter].
Xerox WorkCentre 4118 User Guide
Page 3-7
Original Type
Text
Use for documents
¾ Press [Copy].
containing mostly text.
¾ Press [Original Type].
z Use to select the
type of
document being
scanned.
Mixed
Use for documents with
mixed text and graphics.
¾ Use the Navigation Keys to select the option
required and press [Enter].
Photo
On
Use for photographs.
Color Original
Use when scanning color ¾ Press [Copy].
originals.
¾ Press [Color Original].
z Use when
scanning a color
original.
¾ Use the Navigation Keys to select [On] and press
[Enter].
Paper Supply
Status
Map
The Status Map identifies ¾ Press [Copy].
which paper tray is
selected, when a paper
tray is empty and when an
error occurs.
¾ To select a paper tray, press the [Paper Supply]
z Use to select the
paper source.
key until the required tray is lit on the Status Map.
The Status Map identifies which paper tray is
selected, when a paper tray is empty and when an
error occurs. The Status Map has a light for each
paper tray.
Bypass
Paper
Jam
Each time the [Paper Supply] key is pressed, a
different tray is selected and a green light displays
to indicate the selected tray. When two tray lights
display together, the Auto Tray Switching feature
is active. This enables the machine to switch to a
different tray if the current tray runs out of paper.
Tray 1
Tray 2
If a paper tray is empty, the light will flash and if
enabled, an error tone will sound.
Bypass Use to notify the machine ¾ If the Bypass Tray is selected the Paper Type
the type of paper loaded
option displays. Use the Navigation Keys to select
in the Bypass Tray.
the Paper Type being loaded and press [Enter].
If using the Bypass, remember to load the
required stock.
Page 3-8
Xerox WorkCentre 4118 User Guide
Special Copy Features
The special Copy features available can be accessed by pressing the Menu/Exit key and then
selecting Copy Features on the display.
Menu/Exit
Enter
Navigation Keys
Feature Description
FEATURE
OPTIONS
TO SELECT
ID Card Copy
-
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Copy Features]
z Useto copy both
sides of an ID
document e.g. a
drivers license,
onto one side of
paper.
and press [Enter].
¾ Use the Navigation Keys to select [ID Card Copy]
and press [Enter].
¾ [Press Start S.1] displays. Load Side 1 of the
original on the Document Glass and press [Start].
¾ Repeat for Side 2 when [Press Start S.2] displays.
The machine prints both sides of the ID document
on one side of paper.
Xerox WorkCentre 4118 User Guide
Page 3-9
Edge Erase
Off
Use to de-activate the
feature.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Copy Features]
z Use to ’clean up’
the edges of an
original e.g. if it
is frayed or has
hole punch or
and press [Enter].
Small Orig Use to erase 6 mm (0.25")
Edges
from the edge of the
document.
¾ Use the Navigation Keys to select [Edge Erase]
and press [Enter].
staple marks.
Binder Use to erase 24 mm (1.0")
¾ Select the required Edge Erase option and press
Holes
from the left edge of the
document.
[Enter] to save the selection.
Book
Use to erase 6 mm (0.25")
Center & from the left and right
Edges edge of the document.
Border Use to create a border
Surround around all edges of the
document.
Margin Shift
Off
Use to de-activate the
feature.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Copy Features]
z Use to create a
binding edge for
the document.
and press [Enter].
Auto
Use to center the image
Center on the paper.
¾ Use the Navigation Keys to select [Margin Shift]
and press [Enter].
Left
Use to enter a shift
Margin amount for the left margin.
¾ Select the required Margin Shift option and press
[Enter].
Right
Use to enter a shift
Margin amount for the right
¾ If required, enter a shift amount using the Numeric
margin.
Keypad and press [Enter].
Top
Use to enter a shift
Margin amount for the top
margin.
Bottom Use to enter a shift
Margin amount for the bottom
margin.
Page 3-10
Xerox WorkCentre 4118 User Guide
Book Copy
Off
Use to de-activate the
feature.
¾ Use the Document Glass when copying bound
documents.
z Use when
copying bound
documents. If
the document is
too thick, lift the
cover until its
hinges are
caught by the
stopperandthen
close the cover.
¾ Press [Menu/Exit].
Left Page Use to scan and copy the
left page of a bound
¾ Using the Navigation Keys select [Copy Features]
document.
and press [Enter].
Right
Page
Use to scan and copy the
right page of a bound
document.
¾ Use the Navigation Keys to select [Book Copy]
and press [Enter].
¾ Select the required Book Copy option and press
Both
Pages
Use to scan and copy
both pages of a bound
document.
[Enter].
Auto Suppress
On
Off
Use to activate the Auto ¾ Press [Menu/Exit].
Suppress feature.
¾ Using the Navigation Keys select [Copy Features]
z Use when
copyingoriginals
which require
the background
removing.
and press [Enter].
Use to de-activate the
feature.
¾ Use the Navigation Keys to select [Auto
Suppress] and press [Enter].
¾ Select [On] and press [Enter].
Covers
Off
Use to de-activate the
feature.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Copy Features]
z Use to
automatically
add covers to
your copied set
using stock
taken from
and press [Enter].
Front
Use to add a blank or
printed front cover to the
copies.
¾ Use the Navigation Keys to select [Covers] and
press [Enter].
Back
Use to add a blank or
printed back cover to the
copies.
another tray.
¾ Select the required Covers option and press
[Enter].
¾ Select the Paper Tray containing the covers stock
Front & Use to add a blank or
and press [Enter].
Back
printed front and back
cover to the copies.
¾ Select [Blank] or [Printed] depending on your
requirement, and press [Enter].
Xerox WorkCentre 4118 User Guide
Page 3-11
Transparencies
Off
Use to de-activate the
feature.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Copy Features]
z Use to create a
single set of
transparencies
with blank or
printed
and press [Enter].
Bypass Use to create a single set
of transparencies with a
blank or printed divider
between each
¾ Use the Navigation Keys to select
[Transparencies] and press [Enter].
separators.
¾ Use the Navigation Keys to select [Bypass] and
transparency.
press [Enter].
¾ Use the Navigation Keys to select [Off], [Printed]
or [Blank] for the separators and press [Enter].
¾ Select a Paper Tray for the separators and press
[Enter].
Create Booklet
On
Off
Use to activate the Create ¾ Press [Menu/Exit].
Booklet feature.
¾ Using the Navigation Keys select [Copy Features]
z Use to copy a
document as a 2
Sided job and
arrange the
pages to
and press [Enter].
Use to de-activate the
feature.
¾ Use the Navigation Keys to select [Create
Booklet] and press [Enter].
produce a
booklet when
folded.
¾ Select [On] and press [Enter].
N Up
Off
Use to de-activate the
feature.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys to select [Copy
z Use to print 2 or
4 original
images reduced
on to one page.
Features] and press [Enter].
2 Up
Use to print the images
from 2 originals on to one
page.
¾ Use the Navigation Keys to select [N Up] and
press [Enter].
4 Up
Use to print the images
from 4 originals on to one
page.
¾ Select the required N Up option and press [Enter].
Page 3-12
Xerox WorkCentre 4118 User Guide
Compatible Features
The following table indicates which features are compatible with other features. It also shows
which input area can be used for a feature e.g. the Document Feeder or Document Glass.
Document
Feeder or Glass
ID Copy Book Create N Up
Copy Booklet
Edge Erase
Margin
Shift Suppress
Auto
Covers
Trans-
parencies
COPY
FEATURE
ID Copy
Glass
Glass
Book Copy
Create Booklet
X
Document Feeder
X
X
X
X
2 Up
Glass / Document
Feeder
N Up
O
4 Up
Document Feeder
Glass
X
X
X
X
X
X
Small Orig
Edges
Edge
Erase
X
O
X
O
X
X
X
X
X
O
X
Binder Holes Glass / Document
X
X
X
X
X
X
X
X
X
X
X
O
X
X
X
O
X
X
X
X
X
O
X
Feeder
Book Center
& Edges
Glass
Border
Surround
Glass / Document
Feeder
Auto Center
Glass
Margin
Shift
X
O
Small Orig Only
Left
Glass / Document
Feeder
O
O
O
O
O
O
O
Not Book Center & Edges
Right
Glass / Document
Feeder
O
Not Book Center & Edges
Top
Glass / Document
Feeder
O
Not Book Center & Edges
Bottom
Glass / Document
Feeder
O
Not Book Center & Edges
Glass / Document
Feeder
Auto Suppress
Covers
O
O
Glass / Document
Feeder
O
O
O
O
O
Not Book Center & Edges
Not Auto
Center
Glass / Document
Feeder
Transparencies
X
X
O
O
X
X
X
X
O
O
X
Not Auto
Center
%
Glass / Document
Feeder
R/E
O
X
O
O
Binder Holes & Border
Surround Only
AutoFit
Clone
Glass
Glass
X
X
X
X
O
X
X
X
X
X
X
X
O
X
X
O
O
O
O
X
X
O
O
O
X
Small Orig Only
O
Small Orig Only
Glass / Document
Feeder
Collate
O
Not Book Center & Edges
Key:
O
=Compatible
X
=Incompatible
Xerox WorkCentre 4118 User Guide
Page 3-13
Page 3-14
Xerox WorkCentre 4118 User Guide
4 Paper and Other Media
purchase as an option.
¾ Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
¾ Setting the Paper Size. . . . . . . . . . . . . . . . . . . . . . 4-8
¾ Media Specifications . . . . . . . . . . . . . . . . . . . . . . . 4-9
Xerox WorkCentre4118 User Guide
Page 4-1
Loading Paper
Preparing Paper for Loading
Before loading paper into the Paper Trays, fan the edges. This procedure separates any
sheets of paper that are stuck together and reduces the possibility of paper jams.
To avoid unnecessary paper jams and misfeeds do not remove paper from its packaging until
)
required.
Using the Paper Trays
Loading the Paper Trays
Using the instructions provided, load paper into the machine. Up to two Paper Trays are
available, depending on your machine configuration. The Paper Trays can hold a maximum of
550 sheets of 80 g/m² (20 lb) plain paper.
¾ To load paper, pull open the
1
2
Paper Tray.
¾ Push down on the pressure plate
until it locks into position.
Page 4-2
Xerox WorkCentre4118 User Guide
¾ Adjust the rear paper guide to the
required paper length.
3
It is preset to A4 or Letter size
depending on country.
¾ To load another size, lift the rear
guide out of the current position
and into the required position.
Rear
Guide
L
The Paper Trays can hold a
maximum of 550 sheets of 80 g/m²
(20 lb) plain paper. You can use
A4, Letter, Folio or Legal size
paper only.
4
z If you experience
problems with
paper feed, turn
the paper around
and if the problem
continues, use
¾ Fan the paper and insert it into
the tray.
If loading Letterhead, ensure the
design is face-up and the top
edge of the sheet is placed at the
right side.
the Bypass Tray.
Xerox WorkCentre4118 User Guide
Page 4-3
¾ Ensure that the paper is
5
positioned under the snubbers.
Corner
snubbers
¾ Do not fill above the Maximum Fill
Line.
Max Fill
Line
6
z When printing
¾ Position the side guide by
squeezing the lever and sliding it
toward the stack of paper, until it
gently touches the side of the
stack.
from your PC,
ensure you select
the Paper Source
and the correct
paper size from
your software
application.
Do not allow the guide to press
against the edge of the paper
tightly.
¾ Close the Paper Tray.
Use the instructions “Setting the Paper Size” on page 4-8 to set the correct size for the Paper
Tray.
)
Page 4-4
Xerox WorkCentre4118 User Guide
¾ To select a paper tray, press the
[Paper Supply] key until the
required tray is lit on the Status
Map.
7
Tray 1 and the Bypass Tray are
available as standard, Tray 2 is
optional.
If two tray lights display together,
the Auto Tray Switching feature is
active. When one tray runs out of
paper, the machine will switch to
the other selected tray.
Status Map
Enter
Paper Supply
Using the Bypass Tray
The Bypass Tray is located on the right side of your machine. It can be closed when not in use,
making the product more compact. Use the Bypass Tray to print transparencies, labels,
envelopes or postcards in addition to making quick runs of paper types or sizes that are not
currently loaded in the paper tray.
Acceptable print media is plain paper with sizes ranging from 98 x 148 mm (3.86 x 5.83 inch),
to Legal size (216 x 356 mm / 8.5 x 14 inch) and weighing between 60 g/m² and 160 g/m² (16
lb and 43 lb).
The following table summarizes the print media allowed and the maximum stacking height for
each paper type.
PAPER TYPE
MAXIMUM STACKING HEIGHT
100 sheets or 9 mm (0.35 inch)
Plain/Bond/Colored and Pre-
printed Paper
Envelope
Transparency
Label
10 envelopes or 9 mm (035 inch)
30 sheets or 9 mm (0.35 inch)
10 sheets or 9 mm (0.35 inch)
10 sheets or 9 mm (0.35 inch)
Cardstock
L
The height is measured with the stack of sheets laid on a flat surface.
Xerox WorkCentre4118 User Guide
Page 4-5
Loading the Bypass Tray
1
z Remove any curl
on postcards,
envelopes, and
labels before
¾ Lower the Bypass Tray, located
on the right side of the product.
¾ Unfold the Paper Support
loading them into
the Bypass Tray.
extension.
Paper
Support
Bypass Tray
¾ Prepare a stack of paper or
envelopes for loading by flexing
or fanning them back and forth.
Straighten the edges on a level
surface.
2
3
z Hold
¾ Load the print material with the
print side facing down and
transparenciesby
the edges and
avoid touching
the print side.
against the right edge of the tray.
¾ Adjust the paper guide to the
width of the stack of print
material.
34
Ensure you have not loaded too
much print media. The stack
should be under the Max. Fill
Line.
Page 4-6
Xerox WorkCentre4118 User Guide
¾ To select the Bypass Tray, press
the [Paper Supply] key until the
Bypass Tray is lit on the Status
Map.
5
¾ When the Bypass Tray is selected
the Paper Type option displays.
the Paper Type being loaded and
press [Enter].
Status Map
Enter
Paper Supply
Use the instructions “Setting the Paper Size” on page 4-8 to set the correct size for the Bypass
Tray.
)
Xerox WorkCentre4118 User Guide
Page 4-7
Setting the Paper Size
After loading paper in the Paper Trays, you will need to set the default Paper Size. Use the
following instructions to set the default Paper Size for each tray.
¾ Press the [Machine Status] key on the Control Panel.
1
2
¾ Select [Machine Setup] using the Navigation Keys and press [Enter].
The display shows [Tray 1 Size] on the bottom line.
¾ Press [Enter].
¾ Use the Navigation Keys to select the Paper Size required and press [Enter] to save the
selection.
13
4
¾ Repeat the procedure for [Tray 2 Size] if available, and [Bypass Size].
¾ Press [Menu/Exit] to exit each menu level and return to Standby mode.
Page 4-8
Xerox WorkCentre4118 User Guide
Media Specifications
Media Sizes and Types
The table below identifies the media sizes which can be used in the Paper Tray and Bypass
Tray, and the capacities which can be loaded.
a
MEDIA SIZE
INPUT SOURCE CAPACITY
Paper Tray Bypass Tray
Plain paper
Letter (8.5 x 11 inch)
550
100
YES
YES
YES
NO
YES
YES
YES
YES
YES
YES
YES
Folio (8.5 x 13 inch)
Legal (8.5 x 14 inch)
Executive (7.25 x 10.5 inch)
A4 (210 x 297 mm)
B5 (182 x 257 mm)
A5 (148 x 210 mm)
550
550
0
100
100
100
100
100
100
550
0
YES
NO
0
NO
Envelopes
No. 10 (8.5 x 14 inch)
C5 (6.38 x 9.37 inch)
DL (110 x 220 mm)
0
0
0
0
0
10
10
10
10
10
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
Monarch (3.87 x 7.5 inch)
B5 (176 x 250 mm)
b
Labels
0
0
10
10
NO
NO
YES
YES
Letter (8.5 x 11 inch)
A4 (210 x 297 mm)
b
Transparency films
Letter (8.5 x 11 inch)
0
0
30
30
NO
NO
YES
YES
A4 (210 x 297 mm)
b
Card stocks
0
0
0
10
10
NO
NO
NO
YES
YES
A6 (105 x 148.5)
Post Card (4 x 6 inch)
Hagaki (5.83 x 8.27 inch)
L
a.
b.
Depending on paper thickness, maximum capacity may be reduced.
Feed one sheet at a time through the Bypass Tray if jams occur.
NOTE: For information about Media weight specifications, refer to “General Specifications” starting on
page 11-6.
Xerox WorkCentre4118 User Guide
Page 4-9
When selecting or loading paper, envelopes, or other special media please adhere to these
guidelines:
¾ Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and
poor print quality.
¾ Use only high quality copier grade paper. Avoid paper with embossed lettering,
perforations, or texture that is too smooth or too rough.
on the floor. Do not place heavy objects on top of the paper, whether it is packaged or
unpackaged. Keep it away from moisture, or other conditions that can cause it to wrinkle or
curl.
¾ During storage, moisture-proof wrap (any plastic container or bag) should be used to
prevent dust and moisture from contaminating your paper.
¾ Always use paper and other media that conform with the specifications detailed in
“General Specifications” on page 11-6.
¾ Use only well-constructed envelopes with sharp, well creased folds:
-
-
DO NOT use envelopes with clasps and snaps.
DO NOT use envelopes with windows, coated lining, self-adhesive seals, or other
synthetic materials.
-
DO NOT use damaged or poorly made envelopes.
¾ It is recommended that you feed special paper types one sheet at a time.
¾ Only use the special media recommended for use in laser printers.
¾ To prevent special media such as transparencies and label sheets from sticking together,
remove them from the exit tray as they are printed.
¾ Place transparencies on a flat surface after removing them from the machine.
¾ Do not leave the film in the paper tray for long periods of time. Dust and dirt may
accumulate on them resulting in spotty printing.
¾ To avoid smudging caused by fingerprints, handle transparencies and coated paper
carefully.
¾ To avoid fading, do not expose the printed transparencies to prolonged sunlight.
o
o
o
o
¾ Store unused media at temperatures between 59 F and 86 F (15 C to 30 C). The relative
humidity should be between 10% and 70%.
¾ Do not load more than 10 sheets of special media into the Bypass Tray at a time.
o
o
¾ Verify that your labels’ adhesive material can tolerate fusing temperature of 200 C (392 F)
for 0.1 second.
Page 4-10
Xerox WorkCentre4118 User Guide
¾ Ensure that there is no exposed adhesive material between labels. Exposed areas can
cause labels to peel off during printing, which can cause paper jams. Exposed adhesive
can also cause damage to machine components.
¾ Do not feed a sheet of labels through the machine more than once. The adhesive backing
is designed for one pass through the machine.
¾ Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or
otherwise damaged.
Xerox WorkCentre4118 User Guide
Page 4-11
Page 4-12
Xerox WorkCentre4118 User Guide
5 Fax (4 in 1 only)
WorkCentre 4118, 4 in 1 only.
¾ Fax Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
¾ Mailbox Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
¾ Mailbox Procedures. . . . . . . . . . . . . . . . . . . . . . . 5-17
¾ Fax Setup Options. . . . . . . . . . . . . . . . . . . . . . . . 5-22
Xerox WorkCentre 4118 User Guide
Page 5-1
Faxing Procedure
Load the Originals
1
Document Feeder:
¾ Remove all staples and paper
clips prior to loading.
¾ Adjust the sliding document
Document
Guides
guides to the size required.
¾ Insert the originals neatly into the
Document Feeder, face up.
The first page should be on top
with the headings towards the
back or left of the machine.
rear edges of the tray. Adjust the
guides to just touch the edges of
the originals.
L
Up to 40 sheets of 80 g/m² (20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m²
(12.5 - 28lb). Sizes range from B5 to Legal (7” x 10” to 8.5” x 14” ). Refer to “Scanner and Copier
Specifications” on page 11-5 for full Document Feeder specifications.
Page 5-2
Xerox WorkCentre 4118 User Guide
Document Glass:
z Ensure no
documents are
loaded in the
Document
¾ Raise the Document Feeder and
position the original face down on
the Document Glass.
Feeder when
using the
Document Glass.
Align with the registration arrow in
the rear left corner.
Leaving the
Document
¾ Lower the Document Feeder.
Feeder open
while scanning
will affect the
image quality and
toner
consumption.
z On completion of
the job, ensure
the Document
Feeder is closed.
Select the Fax key
2
Fax Key
¾ Press the [Fax] key to activate
Fax mode.
The Fax key remains illuminated
when selected.
Xerox WorkCentre 4118 User Guide
Page 5-3
Select the Fax Features
z For more
information about
the available Fax
features, refer to
“Basic Fax
Features” on
page 5-8, and
“Special Fax
¾ Press the Fax feature key
Lighten/Darken
Original Type
jobs are Lighten/Darken, 1-2
Sided, Original Type, Color
Original and Resolution.
Features” on
page 5-10.
1-2 Sided
For information about all the
available Fax features, refer to
“Basic Fax Features” on page 5-
8, and “Special Fax Features” on
page 5-10.
Color
Original
)
Resolution
¾ Using the Navigation Keys, select
the setting required for the
feature and press [Enter].
Enter the Fax Number
z There are several
methods
¾ Use the Numeric Keypad to enter
the telephone number of the
remote fax machine.
available for
entering the
remote fax
number, for more
information refer
to “Dialing
Methods” on
page 5-6.
¾ If an incorrect number is entered,
use the Navigation Keys to select
the incorrect number and then
press the correct number.
Numeric Keypad
Clear/Clear All
Pressing the [Clear/Clear All] key
will delete the entire fax number
entered.
Page 5-4
Xerox WorkCentre 4118 User Guide
Press Start
5
6
¾ Press [Start] to begin the Fax job.
¾ If the display shows [Scan
Another?] and another original
requires scanning, load the next
original and select [Yes]. Press
[Enter].
Navigation Keys
Start
Continue the procedure until all
the originals have been scanned.
¾ Select [No] when all the originals
have been scanned, and press
[Enter].
The Fax is scanned and sent.
Job Status
¾ To view the status of a job, press
the [Job Status] key.
Job Status
¾ A list of current jobs and the job
details displays.
¾ To delete a job, select the
required job and press [Enter].
Select [Cancel Job?] and press
[Enter]. A confirmation message
displays, select [1:Yes] and press
[Enter].
Enter
Navigation Keys
¾ Press [Menu/Exit] to exit Job
Status.
Xerox WorkCentre 4118 User Guide
Page 5-5
Dialing Methods
There are several methods which can be used to enter a fax number or a group of fax number.
The following table identifies and explains all the dialing methods available.
DIALING METHOD
Keypad Dialing
INSTRUCTIONS
¾ Load the originals and select the [Fax] key.
¾ Use the Numeric Keypad to enter the telephone number of the
z Use when entering the remote fax
number using the Numeric Keypad.
remote fax machine.
¾ Press [Start] to send the fax.
Speed Dialing
¾ Load the originals and select the [Fax] key.
¾ Program the features required for the job.
¾ Press [Speed Dial] and enter the Speed Dial number (1-200).
z Use to access a fax number which
has previously been stored in the
machine’s memory.
The name displays and the original is scanned into memory
ready for sending.
¾ If the original is loaded on the Document Glass, the display
asks if you want to send another page. Select [Yes] to add more
originals, or [No] to begin transmission. Press [Enter].
The fax number stored in the speed dial location will be dialed
automatically and the fax is sent.
Group Dialing
¾ Load the originals and select the [Fax] key.
¾ Program the features required for the job.
z Use to access a group of numbers
which have previously been stored in
the machine’s memory.
¾ Press [Speed Dial] and enter the Group Dial number (1-200).
¾ When the required number displays, press [Enter].
The original is scanned into memory.
¾ If the original is loaded on the Document Glass, the display
asks if you want to send another page. Select [Yes] to add more
originals, or [No] to begin transmission. Press [Enter].
The machine automatically sends the fax to each of the
numbers in the Group.
Page 5-6
Xerox WorkCentre 4118 User Guide
Manual group dialing
¾ Load the originals and select [Fax].
¾ Press [Manual Group].
z Use to manually program a broadcast
send to multiple destinations.
The display requests a destination fax number.
¾ Enter the first fax number and press [Enter].
¾ ’Another No.?’ displays. Select [Yes] to add another number
and press [Enter].
¾ Repeat the procedure until all numbers have been entered.
Then select [No] and press [Enter].
The originals are scanned and faxed to the destinations
entered.
Manual Dialing
¾ Load the originals and select [Fax].
¾ Press [Manual Dial].
z Use to dial the fax number with the
telephone line open.
The dial tone is audible and the LCD displays ’Phone’.
¾ Dial the fax number. When the fax tone is heard, press [Start] to
begin faxing.
Redial
¾ Load the originals and select [Fax].
¾ Press [Pause/Redial].
z Numbers which have already been
entered recently can be quickly
The last number is automatically dialled and the originals are
scanned and faxed.
accessed using the Redial function.
¾ Load the originals and select [Fax].
¾ Press [Pause/Redial] for approximately 2 seconds.
The Redial Memory in the machine retains the last 10 numbers
dialled.
¾ Using the Navigation Keys, select the number required and
press [Enter].
¾ Press [Start] to dial the number. The fax is automatically
scanned and sent.
Xerox WorkCentre 4118 User Guide
Page 5-7
Basic Fax Features
There are five basic Fax features available. These features can be selected using the feature
keys located on the Control Panel.
Original Type
Lighten / Darken
2 Sided
Color Original
Resolution
Feature Description
FEATURE
OPTIONS
INSTRUCTIONS
Lighten/Darken 5 Contrast Settings
¾ Press [Fax].
¾ Press [Lighten/Darken].
z Useto adjust the
contrast for a
document
¾ Using the Navigation Keys select a contrast
containing faint
or dark images.
setting.
Each time the key is pressed the selection block
on the display moves to the left or right. As the
selection block moves to the right the contrast
becomes darker.
¾ Press [Enter] to save the selection.
¾ Press [Fax].
Original Type
Text
Use for documents
containing mostly text.
¾ Press [Original Type].
z Use to select the
type of
document being
scanned.
Mixed
Photo
Use for documents with
mixed text and graphics.
¾ Using the Navigation Keys, select the option
required and press [Enter].
Use for photographs.
Page 5-8
Xerox WorkCentre 4118 User Guide
Color Original
On
Use to scan a color
original and send to the
remote fax.
¾ Press [Fax].
¾ Press [Color Original].
z Use to scan and
send a color
original.
¾ Using the Navigation Keys, select the [On] and
z The remote fax must have
the capability to receive a
color fax to use this
feature.
press [Enter].
Resolution
Standard Use for documents with
¾ Press [Fax].
normal sized characters.
¾ Press [Resolution].
z Use to increase
sharpness and
clarity.
Fine
Use for documents
containing small
characters or thin lines.
Also used when sending a
color fax.
¾ Using the Navigation Keys, select the option
required and press [Enter].
Super Fine Use for documents
containing extremely fine
detail. This is available
only if the remote
machine also supports
Super Fine resolution.
Xerox WorkCentre 4118 User Guide
Page 5-9
Special Fax Features
The special Fax features available can be accessed by pressing the Menu/Exit key and then
selecting Fax Features on the display.
Menu/Exit
Enter
Navigation Keys
Feature Description
FEATURE
Toll Save
OPTIONS
INSTRUCTIONS
Off
On
Use to de-activate the
feature.
¾ Press [Menu/Exit].
¾ Using the Navigation keys select [Fax Features]
z Use to set a low
rate period for
sending faxes.
and press [Enter].
Use to enable the feature.
¾ Select [Toll Save] and press [Enter].
¾ Select [On] and press [Enter].
¾ Select [Start Time] and enter a date and time to
start the Toll Save period. Press [Enter].
¾ Select [End Time] and enter a date and time to
end the Toll Save period. Press [Enter].
Page 5-10
Xerox WorkCentre 4118 User Guide
Memory Fax
No.
Used to enter the fax
phone number for the
remote machine.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
z Use to send a
fax from
memory.
and press [Enter].
¾ Select [Memory Fax] and press [Enter].
¾ Enter the fax number for the remote machine.
Press [Enter].
¾ Another No? displays, if required enter another
number and press [Enter].
¾ When all the numbers have been entered the
originals are scanned and stored in memory. The
fax is then sent from memory.
Delay Fax
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
z Use to set a
specific time for
sending your
fax.
and press [Enter].
¾ Select [Delay Fax] and press [Enter].
¾ Enter the fax number using the Numeric Keypad
or Speed Dial, and press [Enter]. Enter another
number if required. When all numbers have been
entered select [No] and press [Enter].
z When the
machine has
more than one
fax stored in
memory, the
status message
Delayed Fax is
displayed.
¾ Enter a name for the job and press [Enter].
¾ The displays shows the current time, enter a time
for the delay fax and press [Enter].
If you set a time earlier than the current time, the
job will be sent at that time the following day.
The originals are scanned into memory ready for
sending.
Xerox WorkCentre 4118 User Guide
Page 5-11
Priority Fax
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
z Use this option
to send your fax
ahead of
and press [Enter].
reserved
operations.
¾ Select [Priority Fax] and press [Enter].
¾ Enter the fax number using the Numeric Keypad
or Speed Dial, and press [Enter]. Enter another
number if required. When all numbers have been
entered select [No] and press [Enter].
¾ Enter a name for the job and press [Enter].
The originals are scanned into memory ready for
sending.
Polling
TX Poll Use to store a document ¾ Press [Menu/Exit].
on the machine ready to
be polled by a remote fax
machine.
¾ Using the Navigation Keys select [Fax Features]
z Polling is used
to retrieve
documents from
remote fax
and press [Enter].
¾ Select [Polling] and press [Enter].
¾ Select [TX Poll] and press [Enter].
¾ Enter a 4 digit Poll Code and press [Enter].
machines.
Remote fax
machines can
also poll your
machine.
¾ To store the originals in the Bulletin Board select
[On]. If the Bulletin Board is not required, select
[Off].
¾ Press [Start]. The originals are scanned into
memory ready to be polled.
Page 5-12
Xerox WorkCentre 4118 User Guide
Delay RX Use to retrieve a
¾ Press [Menu/Exit].
Poll
document from a remote
fax machine at a specified
time.
¾ Using the Navigation Keys select [Fax Features]
and press [Enter].
¾ Select [Polling] and press [Enter].
¾ Select [Delay RX Poll] and press [Enter].
¾ Enter the fax number using the Numeric Keypad
or Speed Dial, and press [Enter].
¾ The display shows the current time, enter a start
time for the remote fax machine to be polled.
Press [Enter] when the correct time displays.
If you set a time earlier than the current time, the
job will be sent at that time the following day.
¾ Enter a 4 digit Poll Code and press [Enter].
The machine will poll the remote machine at the
specified time.
Batch TX
On
Off
Activates the Batch TX
feature.
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
z Use to send
faxes that are
going to the
samelocation,in
one batch.
and press [Enter].
Deactivates the Batch TX
feature.
¾ Use the Navigation Keys to select [Batch TX] and
press [Enter].
¾ Select [On] and press [Enter]. Enter a Batch
Interval between 0 - 99 and press [Enter].
Secure Receive
Print
Print secure faxes
¾ Press [Menu/Exit].
¾ Using the Navigation Keys select [Fax Features]
z Feature must be
enabled in Fax
Setup.
and press [Enter].
¾ Select [Secure Receive] and press [Enter].
¾ Select [Print] and press [Enter].
¾ Enter a passcode and press [Enter].
Xerox WorkCentre 4118 User Guide
Page 5-13
Fax Forwarding
This feature sets up the forwarding details for faxes. This can be set for received and or
transmitted faxes and can also print a copy at the WorkCentre 4118.
To configure fax forwarding:
¾ Press the [Machine Status] button.
1
2
¾ Press
or
until System Admin Tools is displayed and press [Enter].
If the System Admin Tools have been passcode protected, type in the password and press
[Enter].
¾ Press
or
or
until Forward to Fax is displayed and press [Enter].
3
4
¾ Press
until the required forwarding condition is displayed and press [Enter].
The choices are:
Off - don’t forward
RX - forward received
TX - forward transmitted
All - forward RX and TX
Enter the fax number to receive the forwarded fax and press [Enter].
¾ If you want to forward the Fax to another number, press
or
until Yes is displayed
and press [Enter]. Otherwise, choose No and press [Enter].
5
Enter the fax number to receive the forwarded fax and press [Enter].
¾ If you want to print a local copy, press
or
until Yes is displayed and press [Enter].
Otherwise, choose No and press [Enter].
6
7
¾ If you want to delete the assigned recipient of the forwarded faxes, press
or
until
Yes is displayed and press [Enter]. Otherwise, choose No and press [Enter].
Page 5-14
Xerox WorkCentre 4118 User Guide
Mailbox Setup
This feature sets up the forwarding details for faxes. This can be set for received and or
transmitted faxes and can also print a copy at the WorkCentre 4118.
Create a Mailbox
To create a mailbox:
¾ Press the [Machine Status] button.
1
2
¾ Press
or
until System Admin Tools is displayed and press [Enter].
If the System Admin Tools have been passcode protected, type in the password and press
[Enter].
¾ Press
or
or
until Mailbox Setup is displayed and press [Enter].
3
Press
until Mailbox is displayed and press [Enter].
¾ Press
or
until Create is displayed and press [Enter].
4
5
¾ Press
or
until the required Mailbox Type is displayed and press [Enter]. The
choices are:
Set_Conf_MBX (confidential)
Set_Bull_MBX (bulletin)
¾ Press
or
until Enter Box No is displayed and press [Enter].
6
7
Enter the Mailbox Number and press [Enter].
¾ If you want to passcode protect press
or
until Security is displayed and press
[Enter].
Press
or
until Yes is displayed and press [Enter].
Enter the passcode using the keypad and press [Enter].
Enter the Mailbox Id. using the keypad and press [Enter].
¾ If you want to create another Mailbox, press
or
until Another is displayed and
press [Enter]. Repeat steps 6 and 7.
8
Xerox WorkCentre 4118 User Guide
Page 5-15
Delete a Mailbox
To delete a mailbox:
¾ Press the [Machine Status] button.
1
2
¾ Press
or
until System Admin Tools is displayed and press [Enter].
If the System Admin Tools have been passcode protected, type in the password and press
[Enter].
¾ Press
or
or
until Mailbox Setup is displayed and press [Enter].
3
4
Press
until Mailbox is displayed and press [Enter].
¾ Press
or
until Delete is displayed and press [Enter]
¾ Enter the Box Number to be deleted.
¾ Enter the Passcode for the mailbox.
Confirm the deletion.
Page 5-16
Xerox WorkCentre 4118 User Guide
Mailbox Procedures
These procedures allow you to store a document in a mailbox, delete a document from a
mailbox, print a document from a mailbox and to poll a mailbox. Mailboxes are setup by the
System Administrator.
Storing Documents in a Mailbox
¾ Load the originals you want to
1
store in the mailbox.
¾ Press the [Menu/Exit] key.
Menu/Exit
Enter
¾ Using the Navigation Keys select [Mailbox] and press [Enter].
2
3
Select [Store] and press [Enter].
¾ Enter the Box Number for the mailbox and press [Enter].
The originals are scanned and stored in the mailbox. The display shows the number of
pages stored.
Xerox WorkCentre 4118 User Guide
Page 5-17
Printing Mailbox Contents
¾ Press the [Menu/Exit] key.
1
¾ Using the Navigation Keys select
[Mailbox] and press [Enter].
Menu/Exit
Enter
¾ Select [Print] and press [Enter]
2
¾ Enter the Box Number for the mailbox and press [Enter].
3
¾ Enter the Passcode for the mailbox and press [Enter].
The contents of the mailbox are printed and deleted.
Page 5-18
Xerox WorkCentre 4118 User Guide
Deleting Mailbox Contents
¾ Press the [Menu/Exit] key.
1
¾ Using the Navigation Keys select
[Mailbox] and press [Enter].
Menu/Exit
Enter
¾ Select [Delete] and press [Enter].
2
¾ Enter the Box Number for the mailbox and press [Enter].
3
¾ Enter the Passcode for the mailbox and press [Enter].
The contents of the mailbox are deleted.
Xerox WorkCentre 4118 User Guide
Page 5-19
Polling from a Mailbox
¾ Press the [Menu/Exit] key.
1
¾ Using the Navigation Keys select
[Mailbox] and press [Enter].
Menu/Exit
Enter
¾ Select [Poll From] and press [Enter].
2
3
¾ Enter the Box Number to be polled and press [Enter].
Enter the Passcode for the mailbox and press [Enter].
¾ Enter a remote fax number and press [Enter].
The display shows the current time.
4
¾ Enter a Start Time for the mailbox to be polled and press [Enter].
If you set a time earlier than the current time, the originals will be retrieved at that time the
following day.
The mailbox will be polled at the specified time.
Page 5-20
Xerox WorkCentre 4118 User Guide
Sending to a Mailbox
¾ Press the [Menu/Exit] key.
1
¾ Using the Navigation Keys select
[Mailbox] and press [Enter].
Menu/Exit
Enter
¾ Select [Send] and press [Enter].
2
3
¾ Enter the Box Number for where the originals are to be sent, and press [Enter].
¾ Enter the Passcode for the mailbox and press [Enter].
¾ Enter a remote fax number and press [Enter].
The display shows the current time.
4
¾ Enter a Start Time for the originals to be sent and press [Enter].
If you set a time earlier than the current time, the job will be sent at that time the following
day.
The originals will be sent to the mailbox at the specified time.
Xerox WorkCentre 4118 User Guide
Page 5-21
Fax Setup Options
Changing the Fax Setup Options
¾ Press the [Machine Status] key.
1
Enter Machine
Status
¾ Using the Navigation Keys select [Fax Setup] and press [Enter].
2
3
¾ Using the Navigation Keys select the required setup option and press [Enter].
¾ Using the “Fax Setup Options” starting on page 5-23 customize the settings to meet your
requirements.
Press [Enter] to save your selections.
¾ Press [Menu/Exit] to exit each menu level and return to standby mode.
4
Page 5-22
Xerox WorkCentre 4118 User Guide
Fax Setup Options
The following table lists all the Fax Setup options available and provides a instructions for
customizing each setting. Instructions for accessing the Fax Setup options are provided on
page 5-22.
OPTION
Lighten/Darken
Resolution
SETTINGS
5 Contrast Settings
Standard
DESCRIPTION
Use to set the default Lighten/Darken setting.
Use to set the default resolution for fax jobs.
Fine
Super Fine
Tel
Receive Mode
Use to operate in manual mode. When a call is
received pick up the external phone handset or
press [Manual Dial]. If a fax tone can be heard,
press [Start] and replace the handset.
Fax
The machine answers the incoming call and
immediately switches to fax receive mode.
Ans/Fax
Use if attaching an answering machine to the
machine. If the machine detects a fax tone, it
switches to Fax mode automatically.
DRPD
You can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature. This option is
available when you setup DRPD mode.
Fax Duplex
Off
Use to de-activate Fax Duplex.
Long Edge
Use to set fax jobs to print 2 sided, with the
binding edge on the long edge.
Short Edge
Use to set fax jobs to print 2 sided, with the
binding edge on the short edge.
Xerox WorkCentre 4118 User Guide
Page 5-23
Speed Dials
New
¾ Enter a Speed Dial number using the
Numeric Keypad and then press [Enter].
If a number is already stored in the location a
message displays. Enter a different Speed
Dial number.
¾ Enter the fax number you want to store using
the Numeric Keypad and press [Enter].
To insert a pause press the [Pause/Redial]
key and a ’P’ displays.
¾ To assign a name, enter the required name
using the Numeric Keypad. If you do not
require a name leave empty and press
[Enter].
To store more Speed Dial numbers repeat
the procedure.
Edit
¾ If you want to delete a specific Speed Dial
number from the group, press the [Speed
Dial] key and enter the number. The display
shows [Delete].
Delete
To add a new number, press the [Speed Dial]
key and enter the number, the display shows
[Add].
¾ Press [Enter]. Repeat the procedure until all
the editing has been completed.
¾ Press the [Menu/Exit] key when you have
finished editing. The name appears in the
upper line of the display. Change the name if
required and press [Enter].
Page 5-24
Xerox WorkCentre 4118 User Guide
Group Dials
New
¾ Enter a Group number between 1 and 200
using the Numeric Keypad and then press
[Enter].
If a number is already stored in the location a
message displays.
¾ The display asks you to enter a Speed Dial
number to add to the Group. Enter the
number and then press [Enter].
¾ Continue entering Speed Dial numbers until
all the group members have been added.
Press the [Menu/Exit] key when you have
finished entering numbers.
¾ To assign a name to the Group, enter the
required name. If a name is not required.
Press [Enter].
¾ To assign another Group, repeat the
procedure.
Edit
¾ If you want to delete a specific Speed Dial
number from the Group, press the [Speed
Dial] key. The display shows [Delete].
Delete
To add a new number, press the [Speed Dial]
key, the display shows [Add].
¾ Press [Enter]. Repeat the procedure until all
the editing has been completed.
¾ Press the [Menu/Exit] key when you have
finished editing. The name appears in the
upper line of the display. Change the name if
required and press [Enter].
MSG Confirm
On
Sets the machine to print a transmission report
for every fax transmission.
Off
De-activates printing a transmission report.
On-Err
Sets the machine to print a transmission report
only if an error has occurred.
Xerox WorkCentre 4118 User Guide
Page 5-25
Auto Reduction
On
Off
Use to activate the machine performing an
automatic reduction for over-sized fax jobs.
Use to de-activate the automatic reduction.
Over-sized jobs are printed on two pages.
Prefix Dial
Up to 5 digits
The number entered will be added to the
beginning of each fax sent.
Auto Report
On
Off
On
Use to enable a report listing details about the
previous 50 communication operations.
ECM Mode
Use to switch on ECM for all transmissions.
Transmission time may be increased when
ECM is enabled.
Off
Use to switch off ECM.
Redials
[0 - 13]
[1 - 7]
Use to set the number of redial attempts.
Ring to Answer
Use to set the number of rings before
answering. This feature is disabled when
Receive Mode is set to Ans/Fax.
Redial Term
Ringer
[1 - 15]
Use to set the number of minutes between
redial attempts.
Off
Low
Med
High
On
Use to set the ringer volume.
Junk Fax Setup
Secure Receive
Use to restrict receipt of junk mail by only
allowing faxes to be received from remote
machines registered on your machine.
Off
On
Off
Use to set the default option for receiving
secure faxes.
To switch On, enter passcode, then confirm
passcode.
To switch Off, enter current passcode. Any
secure faxes still in memory will be printed.
Page 5-26
Xerox WorkCentre 4118 User Guide
Fax Auto Tray
Tray 1
Tray 1 & Tray 2
All
Selects the default Paper Tray for Fax jobs.
Dial Mode
Tone
Selects the default Dial Mode.
Pulse
DRPD Mode
Set
You can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature that enables
a user to use a single telephone line to answer
several different phone numbers. In this menu
you can set the machine to recognize which ring
patterns to answer.
Before using the Distinctive Ring Pattern
Detection option, Distinctive Ring service must
be installed on your telephone line by the
telephone company. To set up Distinctive Ring
Pattern Detection you will need another
telephone line at your location or someone to
dial your fax number from outside.
To set up the DRPD mode:
From [Fax Setup]:
¾ Press the scroll button
or
until you
see [DRPD Mode] on the bottom line and
press [Enter].
¾ When [Set] is displayed on the bottom line,
press [Enter]. [Waiting Ring] appears on the
display.
¾ Call your fax number from another telephone.
It is not necessary to place the call from a fax
machine.
¾ When your machine begins to ring, do not
answer the call. The machine requires
several rings to learn the pattern.
Xerox WorkCentre 4118 User Guide
Page 5-27
Page 5-28
Xerox WorkCentre 4118 User Guide
Printing a Document
The Xerox WorkCentre 4118 supports printing from these operating systems:
Windows XP
Windows 2000
-
-
-
-
-
Windows NT V4.0
Windows 98/Millennium Edition
Mac OS10.3 and Linux are supported in the optional Network Kit
Your Workstation and the Xerox WorkCentre 4118 must be connected and configured for
printing from these environments.
A PCL print driver is supplied as standard and a PostScript driver is supplied in the optional
Network Kit.
Instructions for loading drivers and connecting the machine via USB or Parallel port are provided
)
in the Getting Started chapter. For network connections, refer to the System Administration
Guide supplied with your Xerox WorkCentre 4118, or contact your System Administrator.
Prior to printing, ensure all relevant connections have been made, the machine is powered on
and there is paper in the paper tray.
¾ Start the program you are using to create the document and create or open the document
requiring printing.
1
2
¾ Select [Print] or [Print Setup] from the File menu.
Ensure that your Xerox WorkCentre 4118 is selected as your default printer.
¾ Select [Properties] if you want to make any programming selections for your print job.
3
4
¾ Select [OK] to close the Properties dialog box.
¾ Select [OK] to process and send the print job.
The job will automatically be printed on your machine.
Page 6-2
Xerox WorkCentre 4118 User Guide
Printer Settings
Most Windows software applications allow you to make changes to the printer settings. This
includes settings that determine how a print job looks such as paper size, paper orientation,
and margins.
Settings made in the application to create the document will usually override settings made in
the printer driver.
You do not need to use any of the control panel keys to use the machine as a printer. For
)
example, if you want to adjust the printing contrast you select the settings in the printer driver,
not the Lighten/Darken feature on the machine’s control panel.
Accessing Printer Settings
You can access printer settings by using either of these methods.
Windows 98/Me
¾ Select File > Print > Properties or File > Print Setup from within any Windows application.
OR
¾ Select Xerox WorkCentre 4118 printer from the Printers folder, then select File >
Properties (or select the printer icon in the Printers folder, and click the right mouse
button).
Windows NT 4.0
¾ Select File > Print > Properties or File > Print Setup from within any Windows application.
OR
¾ Select Xerox WorkCentre 4118 printer from the Printers folder, click the right mouse
button, then select Document Defaults from the drop-down list.
Windows 2000
¾ Select File > Print from within any Windows application.
OR
¾ Select Xerox WorkCentre 4118 printer from the Printers folder, click the right mouse
button, then select Properties and Printing Preferences from the drop-down list.
Xerox WorkCentre 4118 User Guide
Page 6-3
Windows XP
¾ Select File > Print > Properties from within any Windows application.
¾ Select Xerox WorkCentre 4118 printer from the Printers and Faxes folder, click the right
mouse button, then select Printing Preferences from the drop-down list.
Page 6-4
Xerox WorkCentre 4118 User Guide
PCL Driver
When the Printer Properties are displayed, the print job settings can be reviewed and
changed. The Properties window consists of six tabs:
-
-
-
-
-
-
Layout
Paper
Image Options
Output Options
Watermark
About
If the Printer Properties are accessed through the Printers folder, additional Windows-based
tabs are available.
For information on the Windows-based tabs, refer to documentation provided with Windows.
)
For detailed information about the printer settings available on each tab, please refer to the
printer driver on-line Help.
If you access Printer Properties through the Printers folder, any settings made will become the
)
default settings for the printer. Settings made when Printer Properties are accessed through an
application File menu and Print or Print Setup will remain active until the application you are
printing from is closed.
Xerox WorkCentre 4118 User Guide
Page 6-5
Layout Tab
Portrait
Landscape
Use to print across the width
of the page, letter style.
Use to print across the length
of the page, spreadsheet
style.
Rotate 180 Degrees
Favorites
Use to rotate the images 180
degrees.
Use this option to store
your selections for a
particular job. After making
selections, enter a job title
in the window and select
[Save].
Long Edge
Use this option when you require 2
sided output in a Book orientation.
Help
Short Edge
Use to access the
Help system which
provides detailed
information about all
the Print Driver
features.
Use this option when you require 2
sided output in a Calendar
orientation.
OK
Cancel
More Layout Options
Apply
Use to accept
the selections
made and
close the
dialog.
Closes the dialog and
returns all settings to the
values in place before the
dialog was opened.
Provides access to additional layout
Saves all the selections
made without closing the
dialog.
features such as multiple pages per side,
poster, booklet printing, fit to page and
reduce/enlarge.
Page 6-6
Xerox WorkCentre 4118 User Guide
Paper Tab
Size
Print Quantity
Use to select the size of paper
required from the drop down
menu.
Use to select the number of
prints required.
Custom
Use to enter a
customized paper size.
Type
Use to select the type of
paper required.
Cover Page
Source
Use to select the required
paper source for a cover
page.
Use to select the required
paper source for the job.
Banner Page
Use to select whether a banner
page is required.
Xerox WorkCentre 4118 User Guide
Page 6-7
Image Options Tab
Print Quality Mode
Use to select the print resolution. 1200
dpi produces the highest quality output,
600 dpi is the lowest.
Image Quality
Use to select the Image
Quality setting to apply to
the job. The options
available depend on the
resolution selected.
Toner Save Mode
Use to activate Toner
Save mode. Produces a
lower quality output and
uses less toner.
Graphic Options
Provides access to additional options which allow you to
select to print your output as graphics or bitmaps. You
can also select to print all text in black.
Page 6-8
Xerox WorkCentre 4118 User Guide
Output Options Tab
Print Order
Use to select a sequence for your print
job. Select whether to reverse all pages,
print odd pages or print even pages.
Use Print Fonts
If this option is selected
the fonts which are
resident on the printer will
be used for the job.
Collate
Select to produce
collated output
Xerox WorkCentre 4118 User Guide
Page 6-9
Watermark Tab
Current Watermarks
Watermarks are background images which print on each page.
They are useful for adding information such as Draft or
Confidential, or the name of your company. Select the Watermark
required from the list shown, or create a new Watermark.
Add, Update and Delete
Use these options to create
new Watermarks, edit
Watermarks or delete a
Watermark.
Font Attributes
Watermark Message
Select the font type, style,
size and greyscale to use
for your Watermark.
Use this window to enter
the text you would like to
add as a Watermark.
First Page Only
Select this option if you
want the Watermark to print
on the first page only, and
not the rest of the
Message Angle
document.
Select to print the
Watermark horizontally,
vertically or a specified
angle.
Page 6-10
Xerox WorkCentre 4118 User Guide
About Tab
The About Tab provides information about the printer driver. It provides the program version
number and copyright information relating to the printer driver. Clicking on this page will
connect you to the Xerox website, provided you have access to the Internet.
Xerox WorkCentre 4118 User Guide
Page 6-11
Page 6-12
Xerox WorkCentre 4118 User Guide
TWAIN Scanner Program
The Xerox WorkCentre 4118 TWAIN Scanner program is used to scan images, graphics,
photographs, and printed text. Documents can be fed from the Document Feeder or placed
on the Document Glass.
The TWAIN driver is a program for PC printing that supports Windows 98, Windows NT4.0,
Windows 2000, Windows ME and Windows XP environments. Using an independent protocol
and the USB or parallel port, the TWAIN driver converts the scanned image into a standard
format that you can edit.
Macintosh 10.3 or higher and Linux TWAIN Scanning are supported with the Network / PS3
Kit.
Page 7-2
Xerox WorkCentre 4118 User Guide
Open the Image Editing Application
z For instructions
on loading media,
refer to “Loading
Paper” on page 4-
2.
¾ Open your image editing
application and acquire the
WorkCentre 4118 TWAIN
Scanner.
For full media
specifications
refer to “Media
Specifications”on
page 11-7.
This feature allows you to convert
hard copy images into electronic
images that you can use in other
documents.
Load the Originals
32
Document Feeder:
¾ Remove all staples and paper
clips prior to loading.
¾ Adjust the sliding document
Document
Guides
guides to the size required.
¾ Insert the originals neatly into the
Document Feeder, face up.
The first page should be on top
with the headings towards the
back or left of the machine.
¾ Align the stack with the left and
rear edges of the tray. Adjust the
guides to just touch the edges of
the originals.
Xerox WorkCentre 4118 User Guide
Page 7-3
z When using the
Document Glass,
ensure there are
no documents in
the Document
Feeder.
L
Up to 40 sheets of 80 g/m² (20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m²
(12.5 - 28lb). Sizes range from B5 to Legal (7” x 10” to 8.5” x 14” ). Refer to “Scanner and Copier
Specifications” on page 11-5 for full Document Feeder specifications.
Document Glass:
Leaving the
Document
Feeder open
while scanning
will affect the
image quality.
¾ Raise the Document Feeder and
position the original face down on
the Document Glass.
Align with the registration arrow in
the rear left corner.
¾ Lower the Document Feeder.
Select the Scan Features
3
z For Scanner
specifications
refer to “Scanner
and Copier
Specifications”on
page 11-5.
¾ Select [New Scan] in your
application to access the TWAIN
driver options.
¾ Customize the settings available
on the TWAIN driver for the job,
for example Image Type,
Resolution, Document Type and
Enlarge/Reduce.
Page 7-4
Xerox WorkCentre 4118 User Guide
Select Preview
4
¾ Select the [Preview] option on the
TWAIN driver window.
The image displays on the
screen. This gives you the
opportunity to select the specific
area you wish to scan.
¾ If necessary, drag the selection
tool to the area requiring
scanning.
Preview
Select Scan
5
6
¾ Select the [Scan] option on the
TWAIN driver window.
The specified image displays on
the screen.
Scan
Save the Image
¾ Select [File] and [Save].
The image is saved and can now
be used in another document if
required.
¾ Remove your original from the
Document Glass or Document
Feeder.
Xerox WorkCentre 4118 User Guide
Page 7-5
Scanning Using the WIA Driver
Your machine also supports the Windows Image Acquisition (WIA) driver for scanning images.
WIA is one of the standard components provided by Microsoft® Windows® XP and works with
digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan and
easily manipulate images without using additional software.
L
The WIA driver works only on Windows XP with USB port.
WIA Scanning Procedure
¾ Load the document(s) face up into the Document Feeder.
1
OR
Place a single document face down on the Document Glass.
¾ From the Start menu on your desktop window, select [Settings], [Control Panel], and then
[Scanners and Camera].
2
3
4
¾ Double click your scanner driver icon. The Scanner and Camera Wizard launches.
¾ Choose your scanning preferences and click [Preview] to see how your preferences affect
the picture.
¾ Click [Next].
5
Page 7-6
Xerox WorkCentre 4118 User Guide
¾ Enter a picture name, and select a file format and destination to save the picture.
6
7
¾ Follow the on-screen instructions to edit the picture after it is copied to your computer.
If you want to cancel the scan job, press the Cancel button on the Scanner and Camera Wizard.
)
Xerox WorkCentre 4118 User Guide
Page 7-7
Page 7-8
Xerox WorkCentre 4118 User Guide
8 Machine Administration
individual requirements.
¾ Passcode Protection . . . . . . . . . . . . . . . . . . . . . . . 8-7
¾ Clear Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
¾ Maintenance Tools. . . . . . . . . . . . . . . . . . . . . . . . 8-10
¾ Enabling or Disabling Auxiliary Access . . . . . . . . 8-13
Xerox WorkCentre 4118 User Guide
Page 8-1
Reports
Various Reports are available to assist in confirming and monitoring machine activity. Reports
can be set up to include specific information, or to print automatically.
Reports Available
REPORT
DESCRIPTION
Fax Phonebook
This list contains all the numbers currently stored in the machine’s
fax phonebook as Speed Dial and Group Dial numbers.
Fax TX
This report contains information about recent transmission
activities.
Fax RX
This report contains information about recent reception activities.
System Data
This report shows the status of the user-selectable options. After
settings are changed, print this list to confirm your changes.
Scheduled Jobs
This list identifies the documents currently stored for Delay Send,
Priority Send, Group Dial and TX Poll operations. This list shows
the starting time and type of operation.
Fax TX Confirm
Junk Fax List
This list shows a list of confirmed fax transmissions.
This list shows the fax numbers defined as junk fax numbers by
using the Junk Fax Setup menu.
Billing Counters
Connect Page
This report lists the billing counters and their current amounts.
Provides connection information when the optional Network Kit is
installed.
Print All Reports
Use this option to print all the available reports.
Page 8-2
Xerox WorkCentre 4118 User Guide
Printing Reports
Use the following instructions to print a report.
¾ Press the [Machine Status] key.
1
Enter Machine
Status
¾ Using the Navigation Keys select [Reports] and press [Enter].
2
3
¾ Using the Navigation Keys select the required report and press [Enter].
The report is processed and printed.
Xerox WorkCentre 4118 User Guide
Page 8-3
ControlCentre
ControlCentre is software available for the Xerox WorkCentre 4118 which enables Fax and
Print options and features to be setup and viewed remotely using a PC. This tool also enables
firmware upgrades.
After setting up Fax options, creating phonebooks or setting Print options simply click [Apply]
Installing ControlCentre
When Xerox WorkCentre 4118 software is installed the ControlCentre utility is installed
automatically.
For information on installing refer to “Maintenance Tools” on page 8-10.
)
Running ControlCentre
Use the following instructions to run ControlCentre:
¾ Start the Windows software.
1
12
¾ From Programs select [Xerox WorkCentre 4118], then [ControlCentre].
The ControlCentre screen displays.
Using ControlCentre
The ControlCentre software provides three tabs:
-
-
-
Phonebook (4 in 1 only)
Firmware Update
Printer
To exit ControlCentre, click the [Exit] key in the bottom of each tab screen.
For further details, click the [Help] key in the bottom of each tab screen.
When the settings on ControlCentre are changed, or when ControlCentre is run, the settings on
)
the machine and on ControlCentre will be automatically updated to the latest settings made
either on the machine or on ControlCentre.
Page 8-4
Xerox WorkCentre 4118 User Guide
Phonebook Tab (4 in 1 only)
Click on the [Phonebook] tab to create and edit phonebook entries for use with Fax.
Retrieves the
phonebook entries
from the Xerox
WorkCentre 4118 to
ControlCentre
Phonebook entries
Allows the
phonebook entries
to be downloaded
from ControlCentre
to the Xerox
Allows a selected
phonebook entry to
be edited in a
WorkCentre 4118
separate Edit dialog
box
Deletes a selected
phonebook entry
Deletes all phonebook
entries
Firmware Update Tab
Click on the [Firmware Update] tab to update the firmware of the machine.
z This feature
should be used
by System
Administrator
only. For further
information,
pleaserefertothe
System
Administration
Guide.
Xerox WorkCentre 4118 User Guide
Page 8-5
Passcode Protection
System Administration functions can be restricted to individual users by requiring that a
passcode be entered before access to the functions can be granted.
Enable Passcode Protection
¾ Press the [Machine Status] key.
1
2
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Passcode Protect] using the Navigation Keys and press [Enter].
3
When the machine is first installed, the passcode is blank. When you choose Yes, you will be
asked to enter the passcode. Simply press [Enter] when requested to enter the passcode.
)
¾ Using the Navigation Keys select the Function to protect from the table below and press
[Enter].
4
5
¾ Using the Navigation Keys select the Permissions from the table below for the function you
chose in the previous step. Press [Enter].
FUNCTION
Machine Setup
PERMISSIONS
Protect All
Allow All
Allow Tray Sizes
Protect All
Fax Setup
Allow All
Allow Speed Dials
Allow Group Dials
Allow Speed and Group Dials
Xerox WorkCentre 4118 User Guide
Page 8-7
System Admin
Reports
Protect All
Allow All
Protect All
Allow All
¾ To protect more Functions select [Yes], press [Enter] and repeat steps 4 and 5.
6
7
To end, select [Done] and enter the passcode.
¾ If you enabled Passcode Protection, refer to “Change the Passcode” starting on page 8-8
to enter the new passcode.
Change the Passcode
This procedure is used to change an existing passcode or to enter a passcode after Passcode
Protect has been enabled.
¾ Press the [Machine Status] key.
1
2
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Change Passcode] using the Navigation Keys and press [Enter].
3
¾ Enter the existing passcode and press [Enter].
This will be blank if you have just enabled Passcode Protection
)
¾ Enter the new passcode and press [Enter].
4
5
¾ Confirm the new passcode and press [Enter].
Page 8-8
Xerox WorkCentre 4118 User Guide
Clear Memory
This tool is provided to let you clear the data from selected areas of memory. For Fax, you can
clear the phonebook and both receive and transmit history data.
Clearing the Memory
¾ Press the [Machine Status] key.
1
2
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Clear Memory] using the Navigation Keys and press [Enter].
¾ Select the option required and press [Enter].
The choices are:
3
System Data
Fax Phone Book
Fax RX History
Fax TX History
Xerox WorkCentre 4118 User Guide
Page 8-9
Maintenance Tools
A number of maintenance tools are provided in System Admin Tools:
Serial Number
Notify Toner Low
-
-
-
-
-
New Drum
Clean Drum
Billing Counters
These tools can also be accessed using Xerox CentreWare, refer to the System Administration
Guide for more information.
)
Check the Serial Number
¾ Press the [Machine Status] key.
1
2
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Maintenance] and press [Enter].
3
¾ Select [Serial Number] and press [Enter].
The serial number of the Xerox WorkCentre 4118 is displayed.
¾ Press [Menu/Exit] to exit this function.
Page 8-10
Xerox WorkCentre 4118 User Guide
Notify Toner Low
If the Notify Toner option is set to On, when the toner cartridge needs to be replaced, the
machine automatically sends a fax to the service company or the dealer to notify them that the
machine requires a new toner cartridge. This feature will be activated only when the phone
number of the service company or the dealer is stored in the machine’s memory.
¾ Press the [Machine Status] key.
1
2
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Notify Toner Low] and press [Enter].
3
4
¾ Select [On] and press [Enter].
¾ When prompted, enter:
Your Customer Number
Your Customer Name
The Supplier’s Fax Number
The Suppliers Name
New Drum
This function is used to reset the drum counter after the drum has been replaced.
¾ Press the [Machine Status] key.
1
2
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [New Drum] and press [Enter].
3
¾ To set the drum counter to zero, select [On] and press [Enter]. Otherwise, select [Off] and
press [Enter] to exit the selection.
Xerox WorkCentre 4118 User Guide
Page 8-11
Clean Drum
If streaks or spots appear on the prints, the drum cartridge may require cleaning. Ensure that
paper is loaded prior to selecting this option.
¾ Press the [Machine Status] button.
1
2
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Clean Drum] and press [Enter].
3
The Xerox WorkCentre 4118 will print a special cleaning page.
Billing Counters
Billing can display the contents of a number of counters used in the WorkCentre 4118. These
counters are:
-
-
-
-
-
-
-
Total Impressions - the total number of prints produced by the machine.
Toner Impressions - the number of prints produced by the toner.
Drum Impressions - the number of prints produced by the drum.
ADF Scan Page - the number of originals scanned from the Document Feeder.
Platen Scan Page - the number of originals scanned from the Document Glass.
Replaced Toner - the number of prints since the toner was last replaced.
Replaced Drum - the number of prints since the drum was last replaced.
¾ Press the [Machine Status] key.
1
2
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Billing] and press [Enter].
3
¾ Select the required Counter and press [Enter].
Page 8-12
Xerox WorkCentre 4118 User Guide
Enabling or Disabling Auxiliary Access
Auxiliary Access is available as an option. It allows a foreign interface board to be recognized.
Use these instructions to enable or disable Auxiliary Access:
¾ Press the [Machine Status] key.
1
Enter Machine
Status
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
2
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Auxiliary Access] and press [Enter].
3
¾ To enable Auxiliary Access, select [On] is displayed and press [Enter]. Otherwise, select
[Off] and press [Enter].
Xerox WorkCentre 4118 User Guide
Page 8-13
Page 8-14
Xerox WorkCentre 4118 User Guide
9 Maintenance
provided in this chapter for all the maintenance tasks required.
¾ Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
¾ Ordering Supplies . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
¾ Customer Replaceable Units. . . . . . . . . . . . . . . . . 9-5
Xerox WorkCentre 4118 User Guide
Page 9-1
Cleaning
Cleaning the Document Glass and Constant Velocity Transport
(CVT) Glass
Keeping the Document Glass clean helps ensure the best possible output. It is recommended
that the Document Glass is cleaned at the start of each day and during the day as needed.
The Constant Velocity Transport (CVT) glass is the strip of glass located to the left of the
Document Glass and is used to scan originals fed through the Document Feeder. The CVT
glass also requires cleaning.
CAUTION: DO NOT use organic or strong chemical solvents or aerosol cleaners or
pour fluids directly onto any area. Use supplies and cleaning materials only as
directed in this documentation. Keep all cleaning materials out of the reach of
children.
WARNING: DO NOT remove the covers or guards that are fastened with screws or
attempt any maintenance procedure that is not specifically described in this
documentation.
¾ Slightly dampen a soft lint-free
cloth or paper towel with water.
¾ Open the Document Feeder.
CVT Glass
¾ Wipe the surface of the
Document Glass and CVT Glass
until they are clean and dry.
¾ Wipe the underside of the
Document Feeder until it is clean
and dry.
¾ Close the Document Feeder.
Page 9-2
Xerox WorkCentre 4118 User Guide
Control Panel and LCD
Regular cleaning keeps the Control Panel and LCD free from dust and dirt. To remove finger
prints and smudges, clean the Control Panel and LCD screen with a soft, lint-free cloth, lightly
dampened with water.
Outside Areas of the Machine
Use a cloth moistened with water to clean the outside areas of the machine.
Xerox WorkCentre 4118 User Guide
Page 9-3
Ordering Supplies
The Toner Cartridge and the Drum Cartridge are available as customer replaceable units.
The customer replaceable unit part numbers are listed below:
CUSTOMER
REPLACEABLE UNIT
PART NUMBER
Toner Cartridge
006R01278
113R00671
Drum Cartridge
To obtain supplies, contact your local Xerox representative, giving the company name, the
product number and the machine serial number.
Use the space below to keep a record of the telephone number.
Supplies Telephone Number:
# ____________________________________________
Page 9-4
Xerox WorkCentre 4118 User Guide
Customer Replaceable Units
Toner Cartridge
Expected Cartridge Life
The life of the toner cartridge depends on the amount of toner used in each printed job. For
instance, when printing a typical business letter with about 5% page coverage, expect a toner
cartridge life of approximately 8,000 pages (4,000 pages only for the toner cartridge shipped
with the machine). The actual number may vary according to the print density of the pages
being printed. If printing a lot of graphics the cartridge may require changing more often.
Toner Save Mode
The life of the toner cartridge can be extended by using Toner Save mode. The Toner Save
mode uses less toner than normal printing. The printed image is much lighter, and is adequate
for printing drafts or proofs.
For instructions on setting the Toner Save mode refer to “Machine Setup” on page 2-20.
)
Replacing the Toner Cartridge
When the toner cartridge is near the end of its life, white streaks or hue change will occur. The
LCD displays a warning message ‘Toner Low’.
When the ‘Toner Low’ message displays, remove the toner cartridge and gently shake it to
temporarily re-establish the print quality. Shaking the cartridge re-distributes the remaining
toner in the cartridge. This procedure can only be performed once prior to changing the Toner
Cartridge.
¾ Pull the release latch to open the
side cover.
1
CAUTION: Ensure the side cover
is always open before opening
the front cover.
Xerox WorkCentre 4118 User Guide
Page 9-5
¾ Open the front cover.
2
¾ Turn the cartridge locking lever
upwards to release the toner
cartridge.
3
4
z If the
toner gets on
To Re-distribute the Toner:
clothing, wipe it
off with a dry cloth
andwashclothing
in cold water. Hot
water sets toner
into fabric.
¾ Pull out the toner cartridge and
gently shake the cartridge to
distribute the toner evenly inside
the cartridge.
¾ Reinstall the toner cartridge, then
lock the lever.
¾ Close the front cover and the side
cover.
¾ The display shows [New Toner?],
select [No] and press [Enter].
The machine returns to standby.
Page 9-6
Xerox WorkCentre 4118 User Guide
Replacing the Toner
Cartridge:
5
¾ Shake the new toner cartridge
horizontally four or five times.
¾ Slide the new toner cartridge in
until it locks in place.
¾ Turn the toner locking lever
downwards until it locks in place.
¾ Close the front cover and the side
cover.
¾ The display shows [New Toner?],
select [Yes] and press [Enter].
The machine returns to standby.
If the Notify Toner menu option is set to On, when the toner cartridge needs to be replaced,
the machine automatically sends a fax to the service company or the dealer to notify them that
the machine requires a new toner cartridge. This feature will be activated only when the phone
number of the service company or the dealer is stored in the machine’s memory.
For instructions on setting the Send Toner Low Information to On, refer to “Maintenance Tools”
)
on page 8-10.
Xerox WorkCentre 4118 User Guide
Page 9-7
Drum Cartridge
The Drum Cartridge requires replacement when the drum life warning is displayed, after
approximately 20,000 copies.
If streaks or spots are being experienced on the prints there is an option for cleaning the
drum.
For instructions on Cleaning the Drum, refer to “Maintenance Tools” on page 8-10.
)
CAUTION: Do not expose the green drum to light for an extended period. Never
expose the drum to direct sunlight or touch the drum surface. Damage or poor image
quality may result.
Replacing the Drum Cartridge
The useful life of the drum cartridge is approximately 20,000 copies/prints. A high rate of 2
Sided copying/printing reduces the overall life of a drum. The machine displays ‘Drum
Warning’ when the drum is near the end of life. Approximately 1,000 more copies/prints can
be made, but a replacement cartridge should be available. Replace the drum cartridge when
copy/print quality becomes degraded.
¾ Pull the release latch to open the
side cover.
1
2
CAUTION: Ensure the side cover
is always open before opening
the front cover.
¾ Open the front cover.
Page 9-8
Xerox WorkCentre 4118 User Guide
3
z The toner
cartridge must be
removed to
¾ Turn the cartridge locking lever
upwards to release the toner
cartridge.
replace the drum
cartridge.
¾ Pull out the used drum cartridge.
4
5
¾ Unpack the new drum cartridge
and slide it in place, making sure
not to touch the surface of the
drum.
Xerox WorkCentre 4118 User Guide
Page 9-9
¾ Reinstall the toner cartridge, then
lock the lever.
6
¾ Close the front cover and the side
cover.
¾ The display shows [New Drum
Unit?]. Select [Yes] and press
[Enter].
The machine returns to Standby
mode.
If the counter is not reset, ‘Drum Warning’ may appear before the new drum reaches its
)
maximum life. To reset the counter manually refer to the “Maintenance Tools” on page 8-10.
Page 9-10
Xerox WorkCentre 4118 User Guide
10 Troubleshooting
further assistance.
¾ Fault Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
¾ Customer Support . . . . . . . . . . . . . . . . . . . . . . . 10-10
¾ LCD Error Messages. . . . . . . . . . . . . . . . . . . . . 10-11
¾ Problem and Solutions Charts. . . . . . . . . . . . . . 10-14
Xerox WorkCentre 4118 User Guide
Page 10-1
General
A variety of situations can affect the quality of the output. For optimal performance, ensure the
following guidelines are followed:
¾ Do not position the machine in direct sunlight or near a heat source such as a radiator.
¾ Avoid sudden changes in the environment surrounding the machine. When a change
occurs, allow the machine at least two hours to adjust to its new environment, depending
on the extent of the change.
¾ Follow routine maintenance schedules for cleaning areas such as the Document Glass
and Control Panel.
¾ Always set the guides in the Paper Trays to the size of the media in the tray.
¾ Ensure paper clips and paper debris do not contaminate the machine.
Page 10-2
Xerox WorkCentre 4118 User Guide
Fault Clearance
When a fault occurs, check the Status Map on the Control Panel. A red flashing LED identifies
the problem area:-
Status Map
Bypass
Paper
Jam
Tray 1
Tray 2
Document Jams
If a document jams while it is feeding through the Document Feeder, ‘Document Jam’ displays
and the Document Jam LED on the Status Map flashes.
Details for clearing the three areas of the Document Feeder are given below.
Input Misfeed
¾ Open the Document Feeder top
cover.
1
Xerox WorkCentre 4118 User Guide
Page 10-3
¾ Pull the document gently to the
right and out of the Document
Feeder.
2
¾ Close the Document Feeder top
cover.
¾ Feed the documents back into
the Document Feeder.
Exit Misfeed
¾ Open the Document Feeder and
turn the roller knob to remove the
misfed documents from the exit
area.
1
2
If the jammed document
cannot be easily removed,
skip to Roller Misfeed.
¾ Close the Document Feeder and
reload the documents.
Page 10-4
Xerox WorkCentre 4118 User Guide
Roller Misfeed
¾ Open the Document Feeder.
1
2
¾ Turn the release knob to enable
easy removal of the misfed
document from the exit area.
Carefully pull the document to the
right using both hands.
¾ Close the Document Feeder and
reload the documents.
Xerox WorkCentre 4118 User Guide
Page 10-5
Paper Jams
If paper jams occur, ‘Paper Jam’ displays and the Paper Jam or Paper Tray LED on the Status
Map flashes to indicate the problem area. Follow the steps below to clear the jam. To avoid
tearing paper, pull the jammed paper out gently and slowly.
Paper Feed Area
If the paper jams in the feed area ’Paper Jam 0’ displays.
¾ Pull out the Paper Tray.
1
¾ When the tray is fully out, lift the
front part of the tray slightly to
release the tray from the
machine.
¾ Remove the jammed paper by
gently pulling it straight out.
2
3
¾ Once you remove the jammed
paper, open the side cover and
close it to clear the ’Paper Jam 0’
message from the display.
¾ If there is any resistance and the
paper does not move immediately
when pulled, pull the release
lever to open the side cover.
¾ Carefully remove the misfed
paper in the direction shown.
Page 10-6
Xerox WorkCentre 4118 User Guide
¾ Close the cover.
4
¾ Insert the paper tray. Lower the
rear part of the tray to align the
rear edge with the corresponding
slot in the machine, then insert it
completely.
Paper Exit Area
If the paper is jammed in the exit area, ’Paper Jam 2’ displays.
¾ Pull the Release Lever to open
the side cover.
1
CAUTION: Ensure the side cover
is always open before opening
the front cover.
¾ Open the front cover.
¾ Pull down on the Fuser Lever.
This will release pressure on the
paper.
2
Xerox WorkCentre 4118 User Guide
Page 10-7
¾ Turn the Jam Remove Lever in
the direction of the arrow to move
the paper to the exit area.
3
4
5
¾ Gently pull the paper out through
the exit area.
¾ Push the Fuser Lever up.
¾ Turn the Jam Remove Lever
back to the original position.
¾ Close the front cover and side
cover.
Page 10-8
Xerox WorkCentre 4118 User Guide
2 Sided Jam
If a paper jam occurs in the 2 Sided module, ’Duplex Jam’ displays and the Paper Jam LED
on the Status Map flashes.
¾ Pull the Release Lever to open
the side cover.
1
¾ Remove the jammed paper.
¾ Close the side cover.
2
Bypass Tray Jam
If you try to print using the Bypass Tray and the machine does not detect paper due to no paper
or improper paper loading, ’Bypass Jam’ displays and the Bypass Tray LED on the Status Map
flashes.
’Bypass Jam’ may also occur when the paper has not fed correctly in the machine.
¾ Open the Bypass Tray and pull
the paper out of the machine.
1
Xerox WorkCentre 4118 User Guide
Page 10-9
Customer Support
If a fault cannot be resolved by following the LCD instructions, check the troubleshooting
tables in the next section - they may help to solve the problem quickly.
If you need further assistance or information, please visit the Xerox website for online
solutions and support:
http://www.xerox.com
If the problem persists, contact the Xerox Welcome Center or your local Xerox representative.
The serial number of the machine will be required, together with any relevant error codes.
For information on locating the serial number, please refer to “Customer Support” on page 1-5.
)
# ____________________________________________
To access the serial number open the side cover using the release latch and then open the
front door. The serial number is located on the panel above the Toner Cartridge.
The Xerox Welcome Center or local representative telephone number is provided when the
machine is installed. For convenience and future reference, please record the telephone
number in the space below:
Xerox Welcome Center or local representative telephone number:
# ____________________________________________
Xerox US Welcome Center:
1-800-821-2797
Xerox Canada Welcome Center: 1-800-93-XEROX (1-800-939-3769)
Page 10-10
Xerox WorkCentre 4118 User Guide
LCD Error Messages
If an abnormal condition arises in the machine or an incorrect operation is performed, a
message indicating the nature of the error is displayed. If this happens, take the corrective
action listed in the following table.
DISPLAY
Bypass Jam
MEANING
SOLUTION
The machine detects non Open the side cover and remove any jammed
feeding from the Bypass paper.
Tray.
Load paper in the Bypass Tray.
Comm. Err
The machine has a
problem in
Try resending the fax.
communication.
Document Jam
The loaded document has Clear the document jam. Refer to “Document
jammed in the Document Jams” on page 10-3
Feeder.
Door Open
The side cover is not
securely latched.
Close the side cover until it locks into place.
Drum Warning
The drum cartridge is
near the end of life.
Ensure a replacement cartridge is in stock.
quality is degraded. This may show up as dark
marks on the edge of the page. Refer to “Drum
Cartridge” on page 9-8.
Duplex Jam
Drum Empty
Paper has jammed in the Clear the jam. Refer to “2 Sided Jam” on page
middle of 2 Sided printing. 10-9.
The drum cartridge is
empty
Replace the drum cartridge. Refer to “Drum
Cartridge” on page 9-8.
Fuser Error, Open Heat There is a problem in the Unplug the power cord and plug it back in. If the
Error, Heating Error and
Overheat
fuser unit.
problem still persists, please call for service.
Group Not Available
You have tried to select a Try again. Check location for a group.
group.
Incompatible
Remote party did not
have the requested
feature such as polling.
Xerox WorkCentre 4118 User Guide
Page 10-11
DISPLAY
MEANING
SOLUTION
Non-Xerox Toner Cart
You have used an
unauthorized toner
cartridge.
You must use a Xerox approved cartridge.
Operation Not Assigned The machine has no job
to handle.
Line Busy
Line Error
The remote fax did not
answer.
Try again. Contact recipient to ensure remote
machine is functioning correctly.
Your machine cannot
Try again. If the problem persists, wait an hour
connect with the remote or so for the line to clear, then try again.
machine, or has lost
Or, turn the ECM mode on. Refer to “Fax Setup
contact because of a
Options” on page 5-22 for more information.
problem with the phone
line.
LSU Error
A problem has occurred in Try Power Off / Power On. Refer to “Powering
the LSU (Laser Scanning On the Machine” starting on page 2-16. If the
Unit).
problem still persists, please call for service.
Memory Full
The memory is full
Either delete unnecessary documents,
retransmit after more memory becomes
available, or split the transmission into more
than one operation.
No Answer
The remote fax machine Try again. Contact recipient to ensure remote
has not answered after
several redial attempts.
machine is functioning correctly.
Poll Code Err.
Polling Error
You have used an
incorrect poll code.
The remote fax machine The remote operator should know in advance
you want to poll is not that you are polling and have the fax machine
poll.
Enter the correct poll code.
Or, when setting up to poll
another fax machine, you
have used an incorrect
poll code.
No Developer Cartridge The toner cartridge is not Install the toner cartridge. Refer to “Toner
installed. Cartridge” on page 9-5.
Page 10-12
Xerox WorkCentre 4118 User Guide
DISPLAY
MEANING
SOLUTION
No. Not Assigned
The Speed Dial location
has no number assigned.
No Paper
The recording paper in
the paper tray has run
out.
Load the recording paper in the Paper Tray.
RX Tray Full
Paper Jam 0
Paper Jam 1
Paper Jam 2
Power Failure
Toner Empty
Paper is overstacked in
the output bin.
Remove paper.
Paper has jammed in the Clear the jam. Refer to “Paper Jams” on page
paper feeding area. 10-6.
Paper has jammed in the Clear the jam. Refer to “Paper Jams” on page
fuser area. 10-6.
Paper has jammed in the Clear the jam.Refer to page “Paper Jams” on
paper exit area.
page 10-6.
The machine’s memory
has not been backed up.
The Toner Cartridge has Replace with a new toner cartridge. Refer to
run out. The machine
stops.
“Toner Cartridge” on page 9-5.
Toner Low
The toner is almost
empty.
Take out the toner cartridge and gently shake it.
By doing this printing operations can be
temporarily resumed.
Retry Redial?
Function Full
The machine is waiting for Press [Start] to immediately redial, or [Stop] to
the programmed interval cancel the redial operation.
to automatically redial.
The memory has become Either delete unnecessary documents, or
full.
retransmit after more memory becomes
available. The transmission can also be split
into more than one operation if it is a large job.
Xerox WorkCentre 4118 User Guide
Page 10-13
Problem and Solutions Charts
The following chart lists some conditions that may occur and the recommended solutions.
Follow the suggested solutions until the problem is corrected. If the problem persists, please
call for service.
Copying Problems
CONDITION
The LCD does not turn on
SUGGESTED SOLUTION
Check that the product is plugged into an electrical receptacle and
ensure that there is power to the receptacle.
Ensure the ON/OFF switch is in the ON position.
Copies are too light or too dark If the original is light, use the Lighten/Darken key to darken the
image.
If the original is dark, use the Lighten/Darken key to lighten the
image.
Smears, lines, marks, or spots
on copies
adjust the image.
If no defects are on the original, clean the Document Glass and
If a line is present when using the Document Feeder and not when
using the Document Glass, clean the CVT glass. For stubborn
spots use a crumpled up piece of paper or a credit card. Refer to
“Cleaning the Document Glass and Constant Velocity Transport
(CVT) Glass” on page 9-2.
If the problem still persists, clean the Drum Cartridge. Refer to
“Maintenance Tools” on page 8-10 for instructions.
Copy image is skewed
Ensure that original is positioned correctly on the Document
Glass.
Check that copy paper is loaded correctly.
Blank copies
Ensure that the original is face down on the Document Glass or
face up in the Document Feeder.
Image rubs off the copy easily
Replace the paper in the tray with paper from a new package.
In high humidity areas do not leave paper in the product for
extended periods of time.
Page 10-14
Xerox WorkCentre 4118 User Guide
CONDITION
SUGGESTED SOLUTION
Frequent copy paper jams
Fan the stack of paper, then turn it over in the tray. Replace paper
in paper tray with a fresh supply. Check/adjust paper guides.
Ensure that the paper is the proper paper weight 80 g/m² (20 lb)
bond paper is recommended.
Check for copy paper or pieces of copy paper remaining in the
product after a paper jam has been cleared.
Toner yield is lower than
expected and TONER LOW
message displays
Toner may be lodged in the cartridge. Remove the Toner
Cartridge. Shake the Toner Cartridge and tap along the top of the
Toner Cartridge over a waste receptacle. Take care not to touch
the exposed toner on the left side of the cartridge.
Fewer copies from the Toner
Cartridge than expected
Originals contain pictures, solids, or heavy lines. Originals are
forms, newsletters, books etc. The product is being powered on
and off frequently. The Document Feeder is being left open while
copies are being made.
Printing Problems
PROBLEM
PROBABLE CAUSE
SUGGESTED SOLUTION
Check the cable connection.
The product does not
print
The IEEE-1284 Parallel
cable or USB cable is not
connected properly.
The IEEE-1284 Parallel
cable or USB cable is
defective.
Check the cable with a computer and printer
that work. If printing is still not possible, replace
the cable.
The port setting is
incorrect.
Check the printer settings in the Windows
Control Panel to ensure that the print job is
being sent to the correct port. (For Example:
LPT1.)
The toner and drum
cartridges are not
installed properly.
Check that the toner and drum cartridges are
installed properly.
The printer driver may not Reinstall the software.
be installed properly.
The Parallel port cable
specifications may not be cable.
correct.
Use an IEEE-1284 compliant Parallel port
Xerox WorkCentre 4118 User Guide
Page 10-15
PROBLEM
PROBABLE CAUSE
SUGGESTED SOLUTION
Half of the page is blank The page layout is too
Reduce the resolution setting from 600 dpi to
300 dpi. Install more RAM in the computer.
complex.
The page orientation may Change the page orientation in the printer setup
be incorrect.
dialog.
Printing is too slow
The computer parallel
port may not be set for
high speed
If the computer is equipped with an ECP parallel
port, enable this mode of operation. Refer to the
Enabling High Speed Printer Communications
section of the PC’s user guide.
communications.
Computer may not have Install more RAM in the computer.
enough memory (RAM).
Print job is too large
Irregular faded patches There is a paper quality
Reduce resolution from 1200 dpi to 600 dpi.
Use only paper that meets the specifications
required by the product.
of print
problem.
Toner may be unevenly
distributed.
Remove the Toner Cartridge and shake it gently
to distribute the toner evenly. Then reinstall the
toner cartridge.
Black staining
There is a paper quality
problem.
Use only paper that meets the specifications
required by the product.
Character voids
Background scatter
The paper may be too
dry.
Try printing with a different batch of paper.
The paper may be too
damp.
Try printing with a different batch of paper. Do
not open packages of paper until necessary so
that the paper does not absorb too much
moisture from the air.
Printing over uneven
surfaces.
If printing onto envelopes, change the printing
layout to avoid printing over areas that have
overlapping seams on the reverse side.
Missing characters
The paper may be too
damp.
Try printing with a different batch of paper. Do
not open packages of paper until necessary so
that the paper does not absorb too much
moisture from the air.
Back of printout is dirty The transfer roller may be Print a few blank pages to clean the transfer
dirty.
roller.
Incorrect fonts
TrueType fonts may be
disabled.
Use the fonts dialog box in the Control Panel to
enable TrueType fonts.
Page 10-16
Xerox WorkCentre 4118 User Guide
PROBLEM
PROBABLE CAUSE
SUGGESTED SOLUTION
Faded graphics
Toner may be low.
Remove the Toner Cartridge and shake it gently
to distribute the toner evenly. Then reinstall the
Toner Cartridge.
Ensure that a spare Toner Cartridge is
available.
Faxing Problems Solution Chart
PROBLEM
SUGGESTED SOLUTION
Originals are fed diagonally
(skewed)
Ensure the Document Guides are adjusted to the width of the
original being fed.
Check the original meets the conditions established for use with
this device.
The original is not being printed Ensure the originals were placed face-up in the Document Feeder
on the paper of the remote Fax
even though it is being sent
or face-down on the Document Glass.
Originals are not sent even if
operations are carried out
normally
Check that the remote Fax is compatible with the machine. This
machine supports G3 communications but not G4
communications.
Originals cannot be received
even if [Start] is pressed
Ensure the bell rings before picking up the handset.
Ensure the handset is not replaced before pressing [Start]. When
answering a call using the handset and a Fax is being received, do
not replace the handset until [Start] is pressed and the phone line
switches to the machine.
Check the telephone cord has not been disconnected.
Check the power plug has not been unplugged from the power
outlet.
Check with the party trying to send the original that there are no
problems with the remote fax.
Paper is not collated
Ensure the machine has paper loaded.
Check if a paper jam has occurred.
Xerox WorkCentre 4118 User Guide
Page 10-17
PROBLEM
SUGGESTED SOLUTION
dark and is illegible or black
stripes are printed on the
original
clean copy.
Check with the party sending the original that the problem is not
due to a fault or operator error at the remote Fax. For example,
dirty scan glass or dirty scan lamp.
If the same problem occurs even when copies are made on the
machine, clean the drum. Refer to “Maintenance Tools” on page 8-
10 for instructions.
Paper is collated but not printed. Ensure there enough toner.
Check with the party sending the fax that the original was placed
correctly when scanned at the remote Fax.
Page 10-18
Xerox WorkCentre 4118 User Guide
6
11 Specifications
of your machine.
¾ Fax Specifications . . . . . . . . . . . . . . . . . . . . . . . . 11-4
¾ Scanner and Copier Specifications . . . . . . . . . . . 11-5
¾ General Specifications. . . . . . . . . . . . . . . . . . . . . 11-6
¾ Media Specifications . . . . . . . . . . . . . . . . . . . . . . 11-7
Xerox WorkCentre 4118 User Guide
Page 11-1
Introduction
The Xerox WorkCentre 4118 adheres to strict specifications, approvals and certifications.
These specifications are designed to provide for the safety of users and to ensure that the
machine operates in a fully functional state. Use the specifications listed in this chapter to
quickly identify the capabilities of the machine.
z If further
specification
information is
required please
refer to
www.xerox.com.
Page 11-2
Xerox WorkCentre 4118 User Guide
Printer Specifications
ITEM
DESCRIPTION
Emulation
PCL6
Resolution
True 600 x 600 dpi, 1200 dpi class
17 ppm for A4 / 18 ppm for Letter
Printing speed
Effective printing width
208 mm (8.2 inches) for letter / legal (216 x 356 mm / 8.5 x 14 inch)
202 mm (8 inches) for A4
Xerox WorkCentre 4118 User Guide
Page 11-3
Fax Specifications
ITEM
DESCRIPTION
Applicable line
G3 PSTN (Public Switched Telephone Network)
ITU G3, Super G3
Communication Standard
Resolutions
Standard203 x 98 dpi
Fine203 x 196 dpi
Super Fine (Fine Photo)300 x 300 dpi
Super Fine203 x 392 dpi
Super Fine406 x 394 dpi
Halftone (Error Diffusion)
Receiving Resolutions
Data coding
203 x 98 dpi, 203 x 196 dpi, 300 x 300 dpi, 203 x 392 dpi, 406 x 394 dpi
MH/MR/MMR/JBIG/JPEG (Color Transmission)
33.6 kbps
Maximum modem speed
Transmission speed
Fax Memory
<3 seconds (Standard resolution, MMR, 33.6 kbps)
8 MB receive
Printing speed
17 ppm (for A4) 18 ppm (letter size)
208 mm (8.2 inches)
Effective scanning width
Effective printing width
208 mm (8.2 inches) for letter / legal (216 x 356 mm / 8.5 x 14)
202 mm (8 inches) for A4
Document width and weight
Document Feeder:
176 ~ 216 mm (7 ~ 8.5 inches)
45 ~ 105 g/m² (12.5 ~ 28 lb)
Document Glass:
Maximum Legal (216 x 356 mm / 8.5 x 14 inch)
Input paper tray capacity
Document Feeder
Tray 1 and Tray 2 (optional):
Bypass Tray:
550 sheets 80 g/m² (20 lb) Each
100 sheets 80 g/m² (20 lb)
Document Feeder:
Document Glass:
Up to 40 pages 80 g/m² (20 lb)
1 page
Page 11-4
Xerox WorkCentre 4118 User Guide
Scanner and Copier Specifications
ITEM
Scanning method
Copy speed
DESCRIPTION
CCD, Flat-bed
17 A4 / 18 Letter Copies Per Minute
2.5 msec/line MONO
Scan speed
Scan resolution
600 x 600 dpi (Document Glass)
600 x 300 (Document Feeder)
True Color, 250 Gray, Black and white
Black and White
Scan mode
Copy mode
Effective scanning width
Maximum document width
Multi copy range
208 mm (8.2 inches)
216 mm (8.5 inches)
1 ~ 999
Reduction & Enlargement
25% ~ 400% in 1% increments (from Document Glass)
25% ~ 100% in 1% increments (from Document Feeder)
Top, Bottom, Each side 4 mm (0.16 inch)
Under 10 seconds (Normal - Ready)
35 seconds (from Power Save)
Maximum print edge margin
First Copy Out Time
Xerox WorkCentre 4118 User Guide
Page 11-5
General Specifications
ITEM
DESCRIPTION
Tray 1 and Tray 2 (optional): 550 sheets 80 g/m² (20 lb)
Bypass Tray: 100 sheets 80 g/m² (20 lb)
Input paper tray capacity
Output tray capacity
Toner cartridge life
Drum life
250 sheets 80 g/m² (20 lb), face down
8,000 pages (for Starter Cartridge 4,000 pages) at 5% coverage
20,000 pages (5% coverage)
Operating Environment
Temperature: 10 - 32° C / 50 - 90° F (20 ~ 80% RH)
Paper size and weight
Trays 1 & 2:
Bypass tray:
Duplex:
A4, Letter, Folio, Legal (216 x 356 mm / 8.5 x 14 inch
60 ~ 90 g/m² (16 ~ 24 lb)
A6 ~ Legal (216 x 356 mm / 8.5 x 14 mm)
60 ~ 160 g/m² (16 ~ 43 lb)
A4, Letter, Folio, Legal (216 x 356 mm / 8.5 x 14 inch)
80 ~ 90 g/m² (20 ~ 24 lb)
Original document width and
weight
Document Feeder:
176 ~ 216 mm (7 ~ 8.5 inches)
45 ~ 105 g/m² (12.5 lb ~ 28 lb)
Document Glass:
Maximum legal (216 x 356 mm / 8.5 x 14 inch)
Document Feeder capacity
Power rating
40 sheets 80 g/m² (20 lb)
AC220 ~ 240V (Europe), 50/60 Hz 3.0A
AC110 ~ 127V (US, Canada), 50/60 Hz 6.0A
35 W in Power Save mode
Power consumption
115 W in Standby mode
430 W / 420 W during operation
Weight
32 kg (Drum and Toner Cartridges included)
540 x 441 x 488 mm (21 x 17 x 19 inches) without Tray 2
540 x 441 x 619 mm (21 x 17 x 24.4 inches) with Tray 2
64MB
Dimensions (WxDxH)
Memory Size
Page 11-6
Xerox WorkCentre 4118 User Guide
Media Specifications
ITEM
DESCRIPTION
Plain paper, OHP film, Label, Envelope, Card, Postcard
Paper types
available
Paper Type
W x L (mm)
215.9 x 279
W x L (Inch)
8.5 x 11
Letter
Legal
JIS B5
A4
215.9 x 355.6
182 x 257
8.5 X 14
7.17 x 10.12
8.27 x 11.69
7.25 x 10.5
5.85 x 8.27
4.13 x 5.85
4 x 6
210x 297
Executive
A5
184.2 x 266.7
148.5 x 210
105 x 148.5
101.6 x 152.4
100 x 148
A6 card
Paper Sizes
Post Card 4x6
HagaKi
3.94 x 5.83
3.88 x 7.5
4.12 x 9.5
4.33 x 8.66
6.38 x 9.02
Envelope 7-3/4
Envelope COM-10
Envelope DL
Envelope C5
Custom
98.4 x 190.5
105 x 241
110 x 220
162 x 229
98 x 148 ~
215.9 x 355.6
3.86 x 5.83 ~
8.5 x 14
Xerox WorkCentre 4118 User Guide
Page 11-7
ITEM
DESCRIPTION
Input Source
Source
Media Types
Sizes
Thickness
60 ~ 90 g/m²
Paper Tray
Plain Paper
A4, Letter, Legal,
Folio
(16lb ~ 24lb)
Bypass Tray
Plain Paper,
Envelope,
Transparency,
A4, Letter, Legal,
Folio, Executive, A5,
B5, A6, Monarch (7
60 ~ 160 g/m²
(16lb ~ 43lb)
Label, Cardstock 3/4), COM10, #9,
C5, DL, Custom
Duplex
Plain Paper
A4, Letter, Folio,
Legal
80 ~ 90 g/m²
(20lb ~ 24lb)
L
B5 means JIS and ISO
Transparency film thickness: 150 µm
Paper Label thickness: 140 µm
Page 11-8
Xerox WorkCentre 4118 User Guide
Index
Cancel Scan 7-7
Clean Drum 8-12
Numerics
2 Sided
copy 3-7
Document Glass and Constant Velocity Trans-
Outside Areas 9-3
copy 3-7
Collated
copy 3-7
Color Original 5-9
A
About this guide 1-3
Adding Paper 2-17
Administration Tools
Clear Memory 8-9
Maintenance Tools 8-10
Passcode Protection 8-7
Auto Fit
copy 3-7
Auto Suppress
copy 3-11
ControlCentre 8-4
B
Basic Troubleshooting
LCD Error Messages 10-11
Printing Problems Solution Chart 10-15
Solving Problems 10-14
Batch TX 5-13
PCL Button 8-6
Printer Tab 8-6
Using ControlCentre 8-4
Conventions 1-3
Billing Counters 8-12
Book Copy
copy 3-11
Bypass Tray 4-5
Copier Problems Solution Chart 10-14
Copy 3-6
1-2 Sided 3-7
Auto Fit 3-7
C
Auto Suppress 3-11
Book Copy 3-11
Calling for Service 1-5
Xerox WorkCentre 4118 User Guide
Index - 1
Clone 3-7
collated 3-7
Color Original 3-8
Covers 3-11
Create Booklet 3-12
ID Card Copy 3-9
Lighten/Darken 3-6
Margin Shift 3-10
N Up 3-12
Original Type 3-8
Paper Supply 3-8
Reduce/Enlarge 3-6
start 3-5
Fax 5-9
Batch TX 5-13
Delay Fax 5-11
Transparencies 3-12
Copy Features 3-6
Copy Mode 3-2
Copy quantity 3-5
Copying Procedure 3-2
Covers
Mailbox Setup 5-15
Original Type 5-8
Polling 5-12
Priority Fax 5-12
Secure Receive 5-13
start 5-5
copy 3-11
Create Booklet
copy 3-12
Customer Replaceable Units 9-5
Drum Cartridge 9-8
Toner Cartridge 9-5
Fax Specification 11-4
D
Delay Fax 5-11
Dialing Methods
Keypad Dialing 5-6
Manual Dialing 5-7
Manual Group Dialing 5-7
Redial 5-7
Document Feeder 3-3, 5-2, 7-3
Document Glass 3-4, 5-3, 7-4
Cleaning 9-2
General Problems 10-2
General Specification 11-6
Getting Started
Drum Cartridge 9-8
Copying Procedure 3-2
Loading Paper 4-2
Replacing the Drum Cartridge 9-8
Drum Cartridge, installing 2-12
Drum Cleaning 8-12
Drum Replacement 8-11
I
ID Card Copy
Index - 2
Xerox WorkCentre 4118 User Guide
copy 3-9
Margin Shift
copy 3-10
Memory Fax 5-11
Information Sources 1-4
Installing ControlCentre 8-4
Installing Software 2-24
Introduction 1-2
Models and Options 2-6
J
Job Status 5-5
K
Keypad Dialing 5-6
fax 5-8
L
Lighten/Darken
copy 3-6
fax 5-8
Loading Paper 2-17, 4-2
Bypass Tray 4-5
Paper Specification 11-7
Paper Supply
Paper Tray 4-2
Preparation 4-2
Stock Types 4-9
Bypass Tray 4-5
Local Connection
Test Print 2-32
Paper Tray 4-2
Location of Components 2-7
Stock Types 4-9
Paper Tray 4-2
Enable 8-7
PCL Button 8-6
Phonebook Tab 8-5
Polling 5-12
Power Off 2-16
Power On 2-16
M
Machine Overview 2-6
Machine Setup 2-20
ControlCentre 8-4
Machine Setup Options 2-21
Mailbox 5-17
Mailbox Setup 5-15
Maintenance Tools
Billing Counters 8-12
Check Serial Number 8-10
Clean Drum 8-12
Preparing paper for loading 4-2
Print 6-2
Printer Specification 11-3
Printer Tab 8-6
New Drum 8-11
Notify Toner Low 8-11
Making Connections 2-14
Manual Dialing 5-7
Xerox WorkCentre 4118 User Guide
Index - 3
Printing a Document 6-2
Printing Problems Solution Chart 10-15
Printing Procedure 6-2
Priority Fax 5-12
Problem Solving 10-14
Problems
Software Installation 2-24
Solutions, Faxing Problems 10-17
Specifications
Fault Clearance 10-3
General 10-2
Paper 11-7
Q
Printer 11-3
Quantity 3-5
R
Redial 5-7
Reduce/Enlarge
Auto Tray Switching 2-10
Stock Types 4-9
Switching Off 2-16
Switching On 2-16
Windows 2-24
copy 3-6
Regulations 1-6
Replacing the Drum Cartridge 9-8
Resolution 5-9
Fax 5-9
Running ControlCentre 8-4
S
Safety 1-6
Scan
mation 9-7
Canceling a Scan 7-7
TWAIN 7-3
WIA driver 7-6
Scanning Procedure 7-3
Secure Receive 5-13
Selecting Copy Mode 3-2
Selecting Start 3-5, 5-5
Selecting the Paper Supply 3-2
Sending a Fax 5-2
Serial Number 8-10
Serial number 1-5
Setting the Product to Send Toner Low Information
9-7
Setting up the Machine 2-20, 2-21
ControlCentre 8-4
Toner Cartridge, installing 2-12
Transparencies
copy 3-12
Troubleshooting
Copier Problems Solution Chart 10-14
Fault Clearance 10-3
Faxing Problems Solution Chart 10-17
General Problems 10-2
LCD Error Messages 10-11
Printing Problems Solution Chart 10-15
Index - 4
Xerox WorkCentre 4118 User Guide
Solving Problems 10-14
TWAIN 7-3
U
Welcome Center 1-5
Canada 1-5, 10-10
US 1-5, 10-10
Unpacking 2-2
User Interface 2-9
Using ControlCentre 8-4
WIA driver 7-6
Using the Document Feeder 3-3
Using the document feeder 5-2, 7-3
Using the Document Glass 3-4
Using the document glass 5-3, 7-4
X
Xerox Website 1-5
Xerox Welcome Center 1-5
Xerox WorkCentre 4118 User Guide
Index - 5
Index - 6
Xerox WorkCentre 4118 User Guide
|
Xerox Phaser 8560mfp User Manual
Xerox Color Qube 9202 User Manual
Sanyo N 1u User Manual
Mitsubishi Electronics Muz Ge18na User Manual
HARPER HB 513 User Manual
Discovery Kids Volcano Eruption Kit Instruction User Manual
DENON AH D1001 User Manual
DELL WYSE 5010 02 User Manual
DELL STUDIO HYBRID User Manual
BLACK DECKER EPC14 User Manual