MIELE CS 1112 User Manual

Operating and Installation  
Instructions  
Ceramic Combiset  
CS 1112  
CS 1122  
en - US  
To prevent accidents and  
appliance damage,  
read these instructions  
before  
installation or use.  
M.-Nr. 07 346 400  
IMPORTANT SAFETY INSTRUCTIONS  
Only use the combiset for residential  
~
WARNING- When using your gas  
cooking, and for the purposes  
described in this manual.  
Other uses are not permitted and can  
be dangerous.  
appliance follow basic  
precautions, including the  
following:  
Persons who lack physical, sensory  
~
This gas combiset conforms to all  
uniform safety codes and  
regulations.  
or mental abilities, or experience with  
the appliance should not use it without  
supervision or instruction by a  
responsible person.  
Read all instructions before  
installation or use to prevent  
injury and appliance damage.  
Children  
Children should not be left  
~
These instructions contain  
important information on  
unattended in an area where the  
appliance is in use. Never allow  
children to sit or stand on any part of  
the appliance.  
installation, safety, use and  
maintenance of this appliance.  
They will help you avoid injury  
and damage to the appliance.  
Caution: Do not store items of interest  
to children in cabinets above the  
appliance. Children climbing on the  
appliance to reach these items could  
be injured.  
Keep these operating instructions  
in a safe place and pass them on  
to any future user.  
The appliance is hot during use and  
~
remains so for some time after being  
switched off. Keep children away from  
the appliance.  
SAVE THESE INSTRUCTIONS  
Correct usage  
Ensure that any packing material, is  
~
This appliance is not designed for  
~
disposed of safely and kept out of the  
reach of children. Danger of  
suffocation!  
commercial use. It is intended for use in  
domestic households and in similar  
working and residential environments  
such as:  
Keep all pots and pans out of the  
~
reach of children. Danger of burning or  
scalding.  
– shops, offices and similar work  
environments,  
– by customers in hotels, motels, Bed  
& Breakfasts or similar residential  
environments.  
This appliance is not intended for  
outdoor use.  
~
3
IMPORTANT SAFETY INSTRUCTIONS  
Technical safety  
Before servicing, disconnect the  
appliance from the main power supply.  
~
Installation, repair and maintenance  
~
work should be performed by a Miele  
authorized service technician. Work by  
unqualified persons could be  
Do not operate any appliance with a  
~
damaged cord or plug, or if the  
appliance has been damaged in any  
manner. Contact Miele’s Technical Ser-  
vice Department.  
dangerous and may void the warranty.  
Be sure your appliance is properly  
~
installed and grounded by a qualified  
technician.  
Under no circumstances open the  
~
outer casing of the appliance.  
Before installing the combiset,  
check for externally visible damage.  
Do not operate a damaged appliance.  
While the appliance is under  
~
~
warranty repairs should only be  
performed by an authorized service  
technician. Otherwise the warranty is  
void.  
To guarantee the electrical safety of  
~
this appliance, continuity must exist  
between the appliance and an effective  
grounding system. It is imperative that  
this basic safety requirement be met. If  
there is any doubt, have the electrical  
system of the house checked by a  
qualified electrician.  
In the event of any damage to the  
~
appliance, it must be turned off immedi-  
ately and disconnected from the main  
power supply. Contact Miele’s  
Technical Service Department.  
Do not use the appliance until it has  
been repaired. Ensure power is not  
supplied to the appliance until repair  
work is completed.  
Before installation, make sure that  
~
the voltage and frequency listed on the  
rating label correspond with the  
household electrical supply. This data  
must correspond to prevent injury and  
appliance damage. Consult a qualified  
electrician if in doubt.  
Defective components should be  
~
replaced by Miele original spare parts  
only. Only with these parts can the  
manufacturer guarantee the safety of  
the appliance.  
The combiset is not designed for  
~
use with an external timer or a remote  
control system.  
Do not cook on a broken combiset.  
~
Any breakages or cracks in the ceramic  
surface of the appliance are defects  
and must be treated as such. If the  
combiset should break, cleaning  
solutions and spills may penetrate the  
broken combiset and create a risk of  
electric shock. Do not use the  
Do not use an extension cord to  
~
connect this appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance.  
Install the appliance so that the  
~
power cord does not come into contact appliance until it has been repaired.  
with any portion of the combiset which  
may become hot during use.  
4
IMPORTANT SAFETY INSTRUCTIONS  
Be sure that the power cord does Never use the appliance to heat a  
not come in contact with any "hot spots" room. Due to the high temperatures  
~
~
after installation.  
radiated, objects left near the appliance  
could catch fire.  
Safety  
Do not use the appliance until it has  
been properly installed in the  
countertop.  
~
DO NOT TOUCH THE COOKING  
~
AREA OR THE VICINITY AROUND THE  
COOKING AREA - During operation,  
the cooking area and its surroundings  
will get hot and can cause burns. When  
the combiset is shut off, the surface  
may remain hot enough to cause harm  
although the glow is not visible through  
the dark glass. During and after use, do  
not touch or let clothing or other  
Do not store items on the appliance  
~
when not in use. Items could melt or  
catch fire from residual heat or if the  
appliance is turned on inadvertently.  
Always switch the cooking zone(s) off  
after use.  
Never cover the burner with a cloth  
~
or protective oven foil. If inadvertently  
turned on or if there is residual heat, a  
fire could result.  
flammable materials contact the  
cooking area or the vicinity around the  
cooking area until they have had  
sufficient time to cool. As long as the  
surface temperature is high enough to  
cause a burn, the Residual Heat  
Indicator will remain lit. Once sufficient  
time has passed the indicator will go  
out and the surface is safe to touch.  
When more than one combiset is  
~
installed next to each other, be sure not  
to place hot pots or pans on the center  
line. This could damage the seal.  
Be aware of loose fitting or hanging  
~
garments when operating the  
appliance, they may present a fire  
hazard.  
Protect your hands with oven mitts  
~
or potholders when using the  
appliance. Use only dry, heat resistant  
potholders. Moist or damp potholders  
used on hot surfaces can result in  
steam burns. Do not let the potholder  
touch the hot heating elements. Do not  
use towels or other bulky items near the  
appliance.  
Never leave an appliance  
~
unattended at high settings or when  
cooking with oil or fat. Overheated oil  
could ignite. Always heat oil slowly,  
monitoring it as it heats.  
Do not store aerosols, combustibles  
~
or any other easily flammable materials  
underneath or adjacent to the  
appliance.  
Do not heat unopened containers.  
Built-up pressure may cause the  
~
container to burst and result in injury.  
Do not use water on grease fires.  
~
Do not flambé under an exhaust  
~
Smother or use a dry chemical or  
foam-type extinguisher on any fire or  
flame.  
hood. Flames could be drawn up into  
the hood by the suction and the grease  
filters may ignite.  
5
IMPORTANT SAFETY INSTRUCTIONS  
Make certain that the power cords of  
Before using glass, glass/ceramic,  
ceramic, earthenware or other glazed  
cookware verify that they can be used  
on a cooking surface.  
~
~
small appliances do not come in  
contact with the appliance. The  
insulation of the cable could become  
damaged. Danger of electric shock!  
To prevent burns and breathing  
~
Be careful not to drop anything on  
difficulty, allow the combiset to cool  
before cleaning. Some cleaners may  
produce toxic fumes if applied to a hot  
surface.  
~
the ceramic surface of the combiset.  
Even lightweight objects may cause  
damage.  
Use the proper pan size. Select  
~
cookware with flat bottoms large  
Keep the combiset clean. Salt,  
~
sugar, and grit can cause scratches.  
enough to cover the heating element.  
Using undersized cookware will expose  
a portion of the heating element and  
may result in ignition of clothing or  
handles becoming hot. The proper size  
pot or pan will also improve efficiency.  
When wiping spills on a hot  
combiset with a wet sponge or cloth, be  
careful to avoid steam burns.  
~
Do not let flammable materials,  
~
i.e. cooking grease, accumulate on the  
appliance.  
Pot and pan handles should be  
~
turned inward and not extend over the  
countertop to reduce the risk of burns,  
ignition of flammable materials, and  
spills.  
Do not use a steam cleaner to clean  
~
this appliance. Steam could penetrate  
electrical components and cause a  
short circuit.  
Do not use pots or pans with  
~
pronounced edges or ridges on the  
Do not allow either solid or liquid  
~
sugar, pieces of plastic or foil to fall on  
ceramic combiset. These could scratch the burners when they are hot. If these  
residues are allowed to cool on the  
ceramic surface pitting or even  
the combiset permanently. See  
"Selecting cookware" for more  
information. Grains of salt and sand can cracking may occur.  
cause scratches. Make sure that the  
Any spills should be removed as  
quickly as possible to prevent them  
from burning on and becoming difficult  
to remove.  
~
bases of any pots and pans are clean,  
free of any fat or oils and are dry.  
To prevent damage to the combiset  
~
do not use pots and pans with thin  
bases on the combiset. Never heat an  
empty pan unless the pan manufacturer  
states that you can do so.  
SAVE THESE INSTRUCTIONS  
AND REVIEW THEM  
PERIODICALLY  
6
Description of the combiset  
CS 1112  
aVariable burner :  
C 4" or 7" (100 mm or 180 mm) -  
Power: 700 W or 1800 W  
Control knobs for the burners:  
fStandard burner (front)  
gVariable burner (rear)  
bStandard burner :  
C 5 11/16" (145 mm) -  
Power: 1200 W  
Indicators  
cBurner indicators  
dDisplay  
kOn/Off indicator  
lSymbol for the outer-ring of the  
variable burner  
m"Residual Heat" indicator  
7
Description of the combiset  
CS 1122  
aExtended burner  
C 7" or 7" x 10 7/16"  
Control knobs for the burners:  
fStandard burner (front)  
gExtended burner (rear)  
(180 mm or 180 mm x 265 mm) -  
Power: 1500 W / 2400 W  
bStandard burner  
C 5 11/16" (145 mm) -  
Power: 1200 W  
cBurner indicators  
Indicators  
dDisplay  
kOn/Off indicator  
lExtended burner indicator  
m"Residual Heat" indicator  
8
Before using for the first time  
Clean the combiset  
Metal components of the appliance  
have a protective coating which may  
give off a slight odor the first time the  
appliance is heated.  
^ Remove any protective coverings or  
stickers.  
^ Before using for the first time, clean  
the appliance with a damp cloth and  
dry with a soft cloth.  
The smell will dissipate after a short  
time and does not indicate a faulty  
connection or appliance defect.  
Do not use liquid dish soap to clean  
the combiset, this may cause  
permanent blue discolorations.  
9
How the burners work  
One-ring burners use one heating strip, One-ring burner  
and two-ring burners and grill zones  
use two heating strips. Depending on  
the model, the heating strips may be  
separated by a certain distance. See  
the illustrations.  
Every burner is equipped with overheat  
protection (inside temperature limiter),  
to prevent the glass ceramic combiset  
from overheating (see the section on  
"Overheat protection").  
aOverheating protection  
When you select a power setting, the  
heating element switches on and you  
will see the heating strip through the  
combiset.  
bHeating strip  
Two-ring burner  
The power setting determines how hot  
the burner will get, and this is  
electronically regulated. This means  
that the burner will switch on and off as  
needed to maintain the selected power  
level.  
aTechnical detail (not a defect)  
bOverheating protection  
cOutside heating strip  
dSeparation strip  
eInside heating strip  
10  
Use  
Turning a burner On/Off  
Turning on the second ring on  
a Variable/Extended burner  
^ To turn a burner on, press the control  
knob down and turn it clockwise a  
to the desired setting.  
^ Press the control knob down and turn  
it clockwise past "12" to the n  
symbol.  
^ Then turn the control knob  
counterclockwise to the desired  
setting.  
Turning off the burner will also turn off  
the second ring. When the cooking  
zone is turned back on again, only the  
inside ring will be active.  
^ To turn a burner off, turn the control  
knob counterclockwise b to "0".  
Do not turn a burner on without  
pressing the control knob down, and  
do not turn the knob past "12" or n  
to reach "0".  
This will result in damage.  
When selecting level "12", make sure  
that the control knob is set exactly to  
the "12" position.  
11  
Use  
Residual Heat Indicator  
When a cooking zone is switched on,  
the On/Off indicator will light followed  
by the residual heat indicator.  
When the cooking zone is switched off,  
the On/Off indicator goes out. The  
residual heat indicator will turn off once  
the cooking zone is safe to the touch.  
Do not touch the burner or rest any  
objects on the combiset when the  
residual heat indicator is on. Danger  
of burns!  
12  
Use  
Settings  
Use for  
Power level*  
Melt butter, chocolate, etc.  
Dissolving gelatine  
Prepare yogurt  
1 - 2  
Warming small quantities of food/liquid  
Keeping delicate dishes warm  
Cooking rice,  
1 - 3  
Thawing frozen vegetables  
Warming liquid or half-set foods  
Thickening sauces, e.g., hollandaise sauce  
Cooking rice pudding  
3 - 5  
4 - 6  
Defrosting frozen foods  
Steaming vegetables, fish, etc.  
Cooking pasta, soups, etc.  
Steaming grains  
Boiling and continued cooking of large quantities of food  
7
Gently sautéing fish, cutlets, sausages, fried eggs, etc.  
(without smoking the oil/fat)  
8 - 9  
Frying pancakes, crepes, etc.  
9 - 11  
Boiling large quantities of water  
Parboil  
11 - 12  
Symbol for the second heating ring  
n
* These settings are intended as guidelines only. When cooking with large pots,  
large quantities or without using a lid, a higher setting is needed. For smaller  
quantities select a lower setting.  
13  
Use  
Overheat protection  
Each cooking zone is equipped with a  
temperature limiter. This feature  
automatically turns off the heating  
element before the glass ceramic  
becomes too hot. Once the ceramic  
surface has cooled to a safe  
temperature the heating element will  
automatically turn back on.  
The overheat protection may be  
activated by:  
– turning on a burner without putting a  
pan on it.  
– heating an empty pan.  
– an uneven pan not sitting evenly on  
the burner.  
– the pan not conducting heat  
properly.  
If the heating elements cycle on and  
off, even at the highest setting, the  
overheating protection has been  
activated.  
14  
Selecting cookware  
Following these tips will allow you to  
make the most of your ceramic  
combiset.  
Pots and pans  
Special cookware is not required, but  
as is true with all types of cooking  
appliances, the better the cookware,  
the better the performance.  
The cooking surface  
The ceramic combiset is made of an  
extremely hard and durable material.  
The surface is scratch resistant, not  
scratch proof. Avoid using cookware  
with ridged bottoms. Ridged pots with  
dirty or chipped enamel bottoms may  
scratch the combiset if they are pulled  
across the ceramic surface.  
– For the most even and energy  
efficient cooking, the diameter of the  
pots/pans should match the diameter  
of the burners as closely as possible.  
Make sure the combiset and pot  
bottoms are clean before cooking.  
Certain items, particularly sugar grains  
or crystallized liquids such as molasses  
or syrups are harder than ceramic and  
can scratch the surface if they are not  
cleaned off immediately. Small or light  
scratches will not affect the safety or  
performance of the combiset.  
– Use cookware with thick, flat, smooth  
bottoms. Slightly concave bottoms  
will also work adequately. Pans with  
convex bottoms will not cook well.  
– Whenever possible, keep pots and  
pans closed while cooking. This  
helps keep in the most possible heat.  
– For longer cooking periods, you can  
switch off the cooking zone 5 to 10  
minutes before the total cooking time  
is completed. The residual heat will  
continue to cook the food.  
15  
Selecting cookware  
Copper bottom and aluminum pans  
may leave a residue on the combiset in  
the form of metallic lines. This is normal.  
These lines can be removed using a  
non-abrasive ceramic combiset cleaner  
or a shielded scraper blade.  
Be sure to clean the combiset after  
each use. Each time this residue is  
allowed to melt it becomes harder to  
remove and may mar the  
appearance of the combiset.  
Let the combiset cool before  
cleaning.  
Cast iron, glass or stoneware should  
not be used because they have poor  
heat transfer and may scratch the  
combiset surface.  
16  
Cleaning and care  
Do not use a steam cleaner to clean  
this appliance. Steam could  
Be sure that pot and pan bases are  
clean and dry.  
penetrate electrical components and  
cause a short circuit. Pressurized  
steam could cause permanent  
damage to the surface.  
After cleaning dry the ceramic  
surface with a soft cloth to prevent a  
build up of limescale deposits.  
Clean any spills immediately before  
they become difficult to remove.  
Do not use any sharp pointed  
objects which could damage the  
seal between the ceramic surface,  
the surrounding frame and the  
countertop.  
Do not use liquid dish soap to clean  
the ceramic surface. When using  
dish soap a film is left on the surface  
which can lead to discolorations on  
the ceramic surface. These  
discolorations cannot be removed.  
Clean the ceramic surface regularly  
with a ceramic cleaner.  
Never use abrasive cleaners,  
caustic (oven) cleaners, dishwasher  
detergent, scouring pads, steel wool  
or hard brushes. They will damage  
the surface.  
Clean the appliance regularly,  
preferably after each use. Allow the  
appliance to cool before cleaning.  
The ceramic surface can be cleaned  
using a cleaner for ceramic  
surfaces. Follow the manufacturer’s  
instructions.  
Make sure that no cleaner residue  
remains on the ceramic surface by  
carefully wiping the combiset with a  
damp cloth. They may damage the  
combiset or produce toxic fumes  
when heated.  
17  
Cleaning and care  
Ceramic surfaces  
Stainless steel  
^ Wipe off any soiling using a damp  
cloth. Stubborn soiling is best  
removed with a shielded scraper  
blade.  
Clean stainless steel surfaces with  
warm water and liquid dish soap  
applied with a non-abrasive sponge  
and then wipe dry with a soft cloth.  
Soak baked or hardened spills first to  
loosen them.  
^ Apply a ceramic cleaner (available  
from Miele) using a soft cloth or  
paper towel.  
Stainless steel surfaces can be cleaned  
using a non-abrasive stainless steel  
cleaner (available from Miele).  
^ To remove any limescale deposits or  
metallic residue apply a ceramic  
cleaner using a soft cloth or use a  
shielded scraper blade if necessary.  
To help prevent resoiling, a conditioner  
for stainless steel can also be used.  
Apply sparingly with even pressure.  
^ After cleaning wipe the ceramic  
surface with a damp cloth and dry.  
Do not use stainless steel cleaner on  
or around the printing, it may rub  
off. Use only a soft sponge with a  
mild solution of warm water and  
liquid dish soap to clean this area.  
A cleaner with a special additive to  
prevent water marks and smears on the  
ceramic surface may be used.  
Any melted solids like sugar, plastic or  
aluminum foil should be removed as  
quickly as possible, while the burner is  
still warm. If they are allowed to harden  
the combiset may become pitted.  
^ Turn the burner off.  
^ Using a shielded scraper blade,  
scrape the melted item immediately  
off the burner while it is still hot.  
Use caution: Danger of burns!  
^ Allow the combiset to cool and clean  
as previously described.  
18  
Frequently asked questions  
,Repairs should only be carried out by an authorized technician in  
accordance with local and national safety regulations. Unauthorized repairs  
could cause injury or appliance damage.  
What if the appliance does not heat up after it is turned on?  
Possible fault  
Solution  
The circuit breaker has tripped.  
Check whether a fuse is blown. If the  
problem persists contact Miele.  
What if a heating element turns off then on again?  
Possible fault  
Solution  
The overheating protection has  
activated.  
See "Overheating protection".  
What if the food seems to take too long to boil?  
Possible fault Solution  
The control knob may be set past level Turn the control knob exactly to "12".  
"12". When the knob is sitting between  
"12" and "0" the appliance operates at  
reduced power.  
19  
Technical Service  
In the event of a fault which you cannot  
easily fix yourself, please contact the  
Miele Technical Service Department at  
the address on the back of this booklet.  
When contacting Technical Service  
please quote the serial number and  
model of the appliance.  
Adhere rating label sticker supplied  
with the appliance below.  
20  
Technical Service  
MieleCare  
(USA only)  
MieleCare, our Extended Service  
Contract program; gives you the  
assurance of knowing that your  
appliance investment is covered by 5  
years of worry free ownership.  
MieleCare is the only Extended Service  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
factory trained professionals can  
guarantee the safety, reliability and  
longevity of your Miele appliance.  
Please note that unless expressly  
approved in writing by the Miele Ser-  
vice department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
21  
22  
Installation Instructions  
IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE  
Information is subject to change. Please refer to our website to obtain the most  
current product specification, technical & warranty information.  
To prevent accidents  
and appliance damage  
read these instructions  
before  
installation or use.  
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS  
Note to the installer:  
This appliance must not be used in  
a non-stationary location (e.g. on a  
ship).  
~
Please leave this instruction book  
with the consumer for the local  
electrical inspector’s use.  
Do not install this appliance above  
~
an oven unless the countertop is at  
least 1 9/16" (40 mm) thick.  
The minimum distances given in  
these Installation Instructions must  
be observed in order to ensure safe  
operation. Failure to do so increases  
the risk of fire.  
You must ensure the power cable  
~
for the appliance will not come into  
contact with the floor panel after  
installation, nor be subject to any  
mechanical strain.  
The cabinetry and venting hood  
should be installed first to prevent  
damage to the combiset.  
The appliance must not be  
~
permanently sealed into the countertop  
when installed. The sealing strip under  
the edge of the appliance provides a  
sufficient seal for the countertop. See  
"Sealing".  
The countertop must be bonded  
~
with heat resistant (212°F/100°C)  
adhesive to prevent distortion or  
dissolving.  
Any back splashes should be  
heat-resistant as well.  
Keep this instruction book in a safe  
place for reference and pass it on to  
any future user.  
The combiset must not be installed  
~
over a dishwasher, washer, dryer,  
refrigerator or freezer. Heat radiated by  
the combiset may damage them.  
To eliminate the risk of burns or fire  
~
by reaching over heated surfaces  
cabinet storage space above the  
appliance should be avoided. If cabinet  
storage is necessary, the risk can be  
reduced by installing a venting hood to  
project horizontally a minimum of 5"  
(127 mm) beyond the bottom of the  
cabinets.  
24  
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS  
Safety distances above the  
appliance  
The minimum safety distance given by  
the hood manufacturer must be  
maintained between the combiset and  
the hood above it. See the installation  
instructions of the hood for these safety  
measurements.  
If the hood manufacturers instructions  
are not available or if flammable objects  
are installed over the combiset (e.g.  
cabinets, utensil rail, etc.), a minimum  
safety distance of 30" (760 mm) must  
be maintained.  
If there is more than one appliance  
beneath a hood (e.g. wok burner  
and electric combiset), and they  
have different minimum safety  
distances always observe the  
greater distance.  
25  
IMPORTANT INSTALLATION SAFETY INSTRUCTIONS  
Safety distances to the sides  
of the appliance  
The appliance should only be installed  
as shown in the illustrations, while  
(50 mm)  
2 "  
maintaining the required safety  
distances shown. Do not install the  
appliance between two tall cabinets,  
this is a fire hazard.  
A distance of at least 2" (50 mm) must  
be kept between the countertop cut-out  
and the rear wall because of the high  
temperatures radiated.  
recommended  
The minimum distance required from  
the countertop cut-out to the side wall  
or cabinet a:  
2"  
(50mm)  
2" (50 mm)  
for CS 1112  
CS 1122  
CS 1212  
CS 1221  
CS 1223  
CS 1326  
CS 1327  
CS 1411  
1
not recommended  
6" (150 mm)  
for CS 1312  
CS 1322  
CS 1421  
10" (250 mm)  
for CS 1011  
CS 1012  
CS 1012-1  
CS 1028  
not allowed  
26  
Installation  
Safety distance from the wall covering  
If a wall covering is installed, a minimum safety distance must be maintained  
between the countertop cut-out and the covering, since high temperatures can  
damage these materials.  
If the covering is made of a combustible material (such as wood), the distance  
between the countertop cut-out and the wall covering must be a minimum of  
2" (50 mm).  
For coverings made of non-combustible materials (such as metal, marble, granite  
or ceramic tiles) the minimum safety distance e between the countertop cut-out  
and the wall covering must be 2" (50 mm) minus the thickness of the covering.  
For example: thickness of wall covering 9/16" (15 mm)  
2" (50 mm) - 9/16" (15 mm) = minimum safety distance 1 3/8" (35 mm).  
aWall frame  
bWall covering  
x = thickness of the wall covering  
cCountertop  
dCountertop cut-out  
eMinimum safety distance  
with flammable materials 2" (50 mm)  
with non-flammable materials 2" (50 mm) minus x  
27  
Installation  
Installation dimensions CS 1112  
aSpring clips  
bAppliance front  
cInstallation height  
dPower supply box with connection cable, L = 78 3/4" (2000 mm)  
eRating label  
28  
Installation  
Installation dimensions CS 1122  
aSpring clips  
bAppliance front  
cInstallation height  
dPower supply box with connection cable, L = 78 3/4" (2000 mm)  
eRating label  
29  
Installation  
Cut out  
If during installation the seal around  
the frame does not sit flush with the  
countertop in the corners, the corner  
radius, maximum 3/16" (4 mm), can  
be carefully filed down to fit.  
^ Make the countertop cut-out for the  
desired number of appliances  
according to the dimensions  
drawings.  
Remember to maintain a minimum  
safety distance from the back wall,  
as well as from any tall unit or side  
wall to the left or right of the  
combiset.  
See also the "IMPORTANT  
INSTALLATION SAFETY  
INSTRUCTIONS".  
^ Seal the cut surfaces with a suitable  
sealant to avoid swelling caused by  
moisture.  
The materials used must be heat  
resistant.  
30  
Installation  
Installation of multiple  
appliances  
When installing more than one combiset appliance, a support bar b must be  
installed between the appliances.  
Countertop cut-out  
two appliances  
Countertop cut-out  
three appliances  
For the installation of two appliances  
the width of the countertop cut-out D is  
the sum of A and C.  
For the installation of three appliances  
the width of the countertop cut-out D is  
the sum of A and B and C.  
A, B and C = appliance width  
11 5/16", 15" or 22 11/16"  
(288 mm, 380 mm or 576 mm)  
minus 5/16" (8 mm) to allow for the  
overhang  
If more than three appliances are  
being installed, you will need to add,  
A, B or C for each additional  
appliance.  
D = width of the countertop cut-out  
31  
Installation  
Sample calculations for a countertop cut-out for three appliances  
A
B
appliance width  
C
D
appliance width  
minus 5/16"  
(8 mm)  
appliance width  
minus 5/16"  
(8 mm)  
Countertop  
cut-out  
11" (280 mm)  
11" (280 mm)  
11 5/16" (288 mm)  
15" (380 mm)  
11" (280 mm)  
33 3/8" (848 mm)  
40 5/8" (1032 mm)  
14 5/8" (372 mm)  
11" (280 mm) 22 11/16" (576 mm) 22 3/8" (568 mm) 56 1/16" (1424 mm)  
14 5/8" (372 mm) 11 5/16" (288 mm)  
14 5/8" (372 mm) 15" (380 mm)  
11" (280 mm)  
37" (940 mm)  
14 5/8" (372 mm)  
44 1/4" (1124 mm)  
14 5/8" (372 mm) 22 11/16" (576 mm) 22 3/8' (568 mm) 59 11/16" (1516 mm)  
22 3/8" (568 mm) 11 5/16" (288 mm)  
11" (280 mm)  
14 5/8" (372 mm)  
22 3/8" (568 mm)  
44 3/4" (1136 mm)  
52" (1320 mm)  
22 3/8" (568 mm)  
22 3/8" (568 mm)  
15" (380 mm)  
-
44 3/4" (1136 mm)  
32  
Installation  
aSpring clips  
bSupport bars  
cSpace between support bar and countertop  
dCover  
The illustration represents the attachment of spring clips a and support bars b  
for 3 appliances.  
An additional support bar is required for each additional appliance. The position  
for attachment of an additional support bar depends on the width of appliance B.  
33  
Installation  
Attach the spring clips and  
support bars  
Wood or solid surface countertops  
^ Place the supplied spring clips a  
and the support bars b at the  
marked positions as shown above,  
by laying them on the upper edge of  
the cut-out and then securing them  
with the 1/8" x 1" (3.5 x 25 mm) screws  
(supplied).  
34  
Installation  
Granite countertop  
The screws are not needed for  
granite countertops.  
^ Coat the side and lower edges of the  
spring clips between a and b with  
silicone.  
^ Fill the space e between the support  
bars b and the countertop with  
silicone.  
^ Position and attach the spring clips  
a and support bars b with strong,  
double-sided tape c.  
35  
Installation  
Installing the appliance(s)  
^ Place the front edge of the next  
appliance into the cut-out.  
^ Feed the power cord down through  
the cut-out.  
^ Connect the appliance(s) to the main  
power supply (see "Electrical  
connection").  
^ Place the front edge of the appliance  
into the cut-out.  
^ Turn the appliance(s) on and check  
the function.  
^ With a hand on each side of the  
appliance press down evenly on the  
edges until it clicks into position.  
When doing so make sure that the  
appliance seal sits tightly on the  
countertop to ensure it is sealed  
correctly. This is important to ensure  
an effective seal. Do not permanently  
seal into the countertop.  
The appliance may be lifted out  
using a special tool.  
The appliance can also be pushed  
up and out from underneath.  
Note: push the rear out first.  
^ Push the installed appliance to the  
side until the holes in the support bar  
are visible.  
^ Insert the cover d into the holes in  
the support bar b.  
36  
Installation  
Sealing  
Tiled surfaces  
The appliance must not be  
The grouting a and shaded area under  
the appliance frame must be flat and  
even so that the frame will lie evenly  
and the sealing strip under the edge of  
the upper part of the appliance can  
provide an adequate seal against the  
countertop.  
permanently sealed into the countertop  
when installed. The sealing strip under  
the edge of the appliance provides a  
sufficient seal for the countertop.  
If the appliance is sealed into  
position, the countertop or appliance  
could be damaged if it needs to be  
removed for maintenance or service.  
37  
Electrical connection  
Power supply  
,CAUTION: Before installation or  
servicing, disconnect the power  
supply by either removing the fuse,  
shutting off the main power or  
manually "tripping" the circuit  
breaker.  
^ Be sure your electrical supply  
matches the rating label.  
The rating label is located on the  
underside of the appliance.  
The combiset is equipped with a power  
cord encasing 3 wires ready for  
connection to a grounded power  
supply.  
They must be connected to a  
dedicated line through the use of an  
approved junction box.  
Installation work and repairs should  
only be performed by a qualified  
technician in accordance with all  
applicable codes and standards.  
Repairs and service by unqualified  
persons could be dangerous.  
Black : connect to L1 (hot)  
Red: connect to L2 (hot)  
Green: connect to GND (ground):  
Before connecting the appliance to  
the power supply, make sure that  
the voltage and frequency listed on  
the rating label correspond with the  
household electrical supply. This  
data must correspond to prevent  
appliance damage. Consult an  
electrician if in doubt.  
208 V, 60 Hz, 20 A fuse rating  
240 V, 60 Hz, 15 A fuse rating  
Be sure the power outlet is accessible  
after installation.  
For further information, see the wiring  
diagram provided with the appliance.  
Only operate the appliance after it  
has been installed into the  
countertop.  
, WARNING:  
THIS APPLIANCE MUST BE  
GROUNDED!  
Installer:  
Please leave these instructions with  
the consumer.  
38  
Help protect our environment  
Disposal of packing materials  
Disposal of an old appliance  
The cardboard box and packing  
materials are biodegradable and  
recyclable. Please recycle.  
Old appliances contain materials that  
can be recycled. Please contact your  
local recycling authority about the  
possibility of recycling these materials.  
Ensure that any plastic wrappings,  
bags, etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
Before discarding an old appliance  
disconnect it from the electrical supply  
and cut off the power cord to prevent it  
from becoming a hazard.  
39  
Alteration rights reserved / 3911  
M.-Nr. 07 346 400 / 04  
                                                                   
                                                                   
                                                                    
                                                                     
                                                                      
                                                                      
                                                                       
                                                                         
                                                                          
                                                                           
                                                                            
                                                                             
                                                                              
                                                                               
                                                                                
                                                                                 
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST  
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.  

Trion M3000 User Manual
Ricoh Aficio 2020d User Manual
Ricoh 3260 User Manual
Nokia Ddc 1 User Manual
MAKITA UH008G User Manual
LG 42PM1MA TA User Manual
LG 29LY340C User Manual
EPSON BRIGHTLINK 575WI 02 User Manual
DELL 2355DN User Manual
CRAFTSMAN 917.270514 User Manual