EPSON BRIGHTLINK 595WI 02 User Manual

595Wi/595Wi+  
The BrightLink interactive pens turn any wall or table into  
an interactive area, with or without a computer.  
Start Here  
With a computer, you can use Easy Interactive Tools.  
This software lets you use the interactive pen or your  
finger as a mouse to annotate, save, and interact with  
content from your computer.  
Follow the steps on this card to get started with your  
BrightLink:  
Connect your computer and make sure interactive  
1
software is installed  
Calibrate  
• Pen calibration  
2
• Finger touch calibration  
Command toolbar  
Use the PC interactive features  
• Interactive pens  
• Finger touch  
3
Use PC Free Annotation  
4
Drawing toolbar  
Using the remote control  
• Choosing the right tool  
5
BrightLink Interaction  
The projector control toolbar lets you control the  
projector from the screen just as you would using the  
remote control.  
Without a computer, you can use the toolbar that is  
built into the projector (PC Free Annotation). This  
lets you annotate images from a document camera,  
tablet, DVD player, or other source connected to your  
projector.  
Students and colleagues can connect their own  
laptops and annotate on the fly using the built-in  
toolbar, without installing software.  
1 Connect Your Computer and Make Sure  
Interactive Software Is Installed  
You may already have interactive software on your  
computer, or you may need to install it. For  
OS X, you need Easy Interactive Driver and Easy  
Interactive Tools (or other interactive software). For  
Windows, you only need Easy Interactive Tools (or other  
interactive software).  
Turn on the projector by pressing the blue  
button on the remote control.  
power  
1
2
Connect an HDMI or VGA cable from the projector to  
your computer.  
Here’s how to find out if the Easy Interactive Tools (Ver.  
3.00) software is installed on your computer:  
HDMI  
If you are using a Mac: Look for the Easy Interactive  
Driver and Easy Interactive Tools folders in the  
Application folder on your hard drive. If you see these  
folders, the Easy Interactive software is installed.  
VGA  
Connect the USB cable from the projector’s USB  
TypeB port directly to any available USB port on  
your computer.  
3
If you are using Windows:  
Windows 8.x - Navigate to the Apps screen and select  
Easy Interactive Tools Ver. 3.00.  
All other versions - Select  
or Start > All Programs  
or Programs > EPSON Projector > Easy Interactive  
Tools Ver. 3. If you see Easy Interactive Tools Ver. 3, the  
software is installed.  
If the software is not installed, do one of the following to  
install it:  
The default language of the menu system is English.  
To select another language, press the Menu button  
on the remote control. Select Extended and press  
4
5
Use the CD that came with the projector, labeled  
“EPSON Projector Software for Easy Interactive  
Function”  
. Select Language and press  
. Select your  
language and press  
. Press the Menu button to  
exit the menu system.  
Display an image from your computer. If the image  
doesn’t appear, try one of the following:  
On some Windows laptops, you may need to  
hold down the Fn key on the keyboard and press  
F7 or the function key that lets you display on  
an external monitor. It may have an icon such as  
, or it may be labelled CRT/LCD.  
Download the most up-to-date version from:  
epson.com/brightlinkdownloads (U.S.)  
epson.ca/brightlinkdownloads (Canada)  
global.latin.epson.com/soporte (Latin America;  
site available in Spanish)  
On a Mac, you may need to open System  
Preferences and select Displays. Select the  
display or Color LCD option if necessary, then  
click the Arrange or Arrangement tab, and select  
the Mirror Displays check box.  
For more information about Easy Interactive Tools, see  
the online Easy Interactive Tool Tips sheet or the online  
BrightLink User’s Guide.  
Try pressing the Source Search button on the  
remote control.  
2 Calibrate  
Calibration coordinates the position of the pen or your  
finger with the location of your cursor. If the pen or  
finger position and cursor location don’t match, you can  
perform auto calibration, or you can calibrate manually  
for even greater accuracy. You don’t need a computer,  
and you won’t need to calibrate again unless the  
projector or image is moved, or the image is resized.  
Finger Touch Calibration  
To start finger touch calibration, press the User  
1
button on the remote control.  
When you see the Auto Calibration screen, do one  
of the following:  
2
Press  
to run auto calibration, then wait until  
calibration is complete.  
Pen Calibration  
Select No, then press  
and follow the steps  
below to calibrate manually.  
To start pen calibration, press the User button on  
1
the remote control.  
Select Touch Unit Setup, then press  
.
When you see the Auto Calibration screen, do one  
of the following:  
3
4
2
Select Installation Pattern and press  
the on-screen instructions.  
. Follow  
Press  
to run auto calibration, then wait until  
calibration is complete.  
Select Touch Calibration, then press  
.
Select No, then press  
and follow the steps  
below to calibrate manually.  
5
6
When you see the Touch Calibration screen, press  
Select Manual Calibration, then press  
.
to select Yes.  
3
4
A green circle appears in the upper left corner of  
your projected image.  
When you see the Manual Calibration screen, press  
to select Yes.  
Touch and hold the center of the circle with your  
finger until the circle disappears and another one  
appears.  
7
Touch the circles on the screen with your pen to  
perform manual calibration.  
5
Note: Make sure you touch the center of each  
circle; otherwise the calibration may not be  
accurate.  
Continue until all of the circles disappear.  
8
For more detailed instructions, see the online BrightLink  
User’s Guide.  
3 Using the Interactive Features  
Finger Touch  
Interactive Pens  
You can use your finger to perform the same functions  
as the interactive pen when the Touch Unit is installed.  
You can use either the pen or your finger, or use both at  
the same time.  
Your projector came with 2 pens that have different  
colored ends, orange (Interactive Pen A) and blue  
(Interactive Pen B). Make sure one AA battery is  
installed in each pen.  
Battery cover  
When performing finger touch operations, you can use  
two fingers in annotation and whiteboard annotation  
modes.  
To left-click, tap the board with your finger.  
To double-click, tap twice with your finger.  
To right-click, press the board with your finger for  
about 3 seconds.  
To click and drag, press on and drag an item with  
your finger.  
Pen tip  
Battery Button  
light  
To scroll, drag your finger on the screen.  
To turn on the pen, tap the pen tip or press the  
button on the side of the pen. The green light comes  
on briefly. If the battery is low, the light flashes.  
If your device supports these functions, you can also do  
the following:  
Hold the pen perpendicular to the board, as shown  
below.  
To zoom in or out, touch an item using two fingers  
and either move your fingers away from each other  
(zoom out) or toward each other (zoom in).  
To rotate an image, touch the image with your fingers  
and then rotate your hand.  
To drag up or down on a page, or move backward or  
forward in a browser window, use swiping gestures  
or flicks.  
To left-click, tap on the board.  
To double-click, tap twice.  
See the online BrightLink User’s Guide for more  
information.  
To right-click, press the button on the side of the  
pen.  
To click and drag, tap and drag with the pen.  
To move the cursor, hover over the board without  
touching it.  
When you are finished using the pen, simply place it  
in an area away from the projection screen.  
Note: The pens turn off automatically after about  
20 minutes of inactivity. Tap the pen tip or press the  
button on the side to turn the pen back on. Ready  
5 Using the Remote Control  
Remote Control  
Choosing the Right Tool  
If you already have annotation software, you can use  
it with BrightLink. If you are using Microsoft® Office  
2003 or later, you can also use the “inking tools” to add  
handwritten notes to your documents and PowerPoint®  
presentations.  
Turn projector  
on/off  
Select from various  
image sources  
connected to the  
projector  
Here are some tips on choosing among the tools that  
came with your BrightLink projector:  
Access menu  
system for  
additional  
adjustments  
Switch between PC  
Interactive and PC  
Free Annotation  
Enter  
Calibrate  
Zoom in and out  
Page through  
documents  
Temporarily  
turn off image  
and sound  
Stop video action  
Annotate on computer display  
Annotate on white background  
Annotate on images from document  
cameras or other sources  
For more information on using the remote control and  
cool time-saving buttons:  
Use both pens simultaneously  
Use pen and finger simultaneously  
Save annotations  
See the online BrightLink User’s Guide.  
Go to the training section and watch a video or two at  
epson.com/brightlinkvideos (U.S.) or  
epson.ca/brightlinkvideos (Canada).  
Need help?  
The Epson® PrivateLine® service is for you!  
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered  
logomark of Seiko Epson Corporation. BrightLink and PrivateLine are registered  
trademarks of Epson America, Inc.  
All you have to do is call (800) 637-7661. This service is  
available for the duration of your warranty period.  
Mac, OS X, and iPad are trademarks of Apple Inc., registered in the U.S. and  
other countries.  
You may also speak with a projector support specialist by  
dialing (562) 276-4394 (U.S) or (905) 709-3839 (Canada).  
General Notice: Other product names used herein are for identification purposes  
only and may be trademarks of their respective owners. Epson disclaims any and  
all rights in those marks.  
Support hours are 6 AM to 8 PM, Pacific Time, Monday  
through Friday and 7 AM to 4 PM, Pacific Time, Saturday.  
Days and hours of support are subject to change without  
notice. Toll or long distance charges may apply.  
This information is subject to change without notice.  
© 2014 Epson America, Inc., 2/14  
Printed in XXXXXX  
CPD-40733  

Whirlpool Ace184pt0 User Manual
Samsung Inkjet Facsimile Sf 331p User Manual
Samsung Aw0819 User Manual
HP ELITEBOOK 8440W User Manual
Fv 05 11vkl1 User Manual
Dewalt Wet Dry Vac User Manual
DELL U2713H User Manual
CRAFTSMAN 139.53975SRT1 User Manual
BLACK DECKER HP9048 User Manual
ASUS RT AC750 User Manual