Samsung Aw0819 User Manual

OWNER’S  
INSTRUCTIONS  
AW0719  
AW0819  
WINDOW-TYPE  
ROOM AIR CONDITIONER  
( Cool )  
E
S
DB68-00322A (1)  
Contents  
PREPARING YOUR AIR CONDITIONER  
Safety Precautions .........................................................................................  
Air Conditioning Unit - Main Parts and Control Panel ....................................  
Getting Started ...............................................................................................  
2
4
5
OPERATING YOUR AIR CONDITIONER  
Cooling Your Room ........................................................................................  
Airing Your Room ...........................................................................................  
Switching the Air Conditioner Off ....................................................................  
Adjusting the Air Flow Direction Horizontally ..................................................  
Adjusting the Air Flow Direction Vertically ......................................................  
6
7
7
8
8
RECOMMENDATIONS FOR USE  
Operating Recommendation ...........................................................................  
Temperature and Humidity Ranges ................................................................  
9
9
Cleaning Your Air Conditioner ........................................................................ 10  
Solving Common Problems ............................................................................ 11  
Technical Specifications ................................................................................. 11  
INSTALLATION ....................................................................................................... 12  
E-3  
Air Conditioning Unit - Main Parts and Control Panel  
HOW TO OPEN THE OPERATING UNIT.  
Press the area marked “ ”on the door.  
The design and shape are subject to  
change according to the model.  
Inner air flow blades  
Air outlet  
(right/left orientation)  
Outer air flow blades  
(up/down orientation)  
Air inlet (Outside)  
Air inlet (Inside)  
Ventilation lever  
Air filter  
(The air filter is  
located in inside.)  
Power plug  
(The type of the power plug  
may differ according to the  
type of local power supply.)  
OPERATION  
THERMOSTAT  
OFF  
6
LOW  
FAN  
LOW  
COOL  
8
4
2
10  
Temperature  
control dial  
Operating mode  
selection dial  
HI  
FAN  
HI  
COOL  
12  
COOLEST  
E-4  
Getting Started  
You have just purchased a w indow -type room air conditioner and it has been installed  
by your installation specialist.  
Your Ow ners Instructions contain much valuable information on using your air conditioner.  
Please take the time to read them as they w ill help you take full advantage of the units features.  
The booklet is organized as follow s.  
The illustration on page 4 show s the air conditioning unit;  
it indicates the location and purpose of the m ain parts and controls on the unit.  
In the m ain part of the docum ent, you w ill find a series of step-by-step  
procedures for each function available.  
The illustrations in the step-by-step procedures use four different symbols:  
PRESS  
PUSH  
IMPORTANT  
NOTE  
E-5  
Cooling Your Room  
You must select the Cool mode if you w ish to low er the temperature  
in your room. You can also set the fan speed.  
1
Select the operating mode and fan speed.  
OPERATION  
OFF  
To cool your room with a...  
Set the operating mode  
selection dial to...  
High fan speed  
Low fan speed  
HI COOL  
LOW  
FAN  
LOW  
COOL  
LOW COOL  
Result: The air conditioner starts up in Cool mode.  
HI  
FAN  
HI  
COOL  
The fan starts up at the speed selected.  
You can change modes at any time.  
2
To adjust the temperature, turn the temperature control dial  
to the desirde position.  
THERMOSTAT  
81˚F ~ 73˚F  
Possible temperatures: Between 64°F and 84°F inclusive.  
6
Result: The air conditioner starts cooling if the room temperature  
is higher than the selected temperature.  
8
4
81˚F  
~ 84˚F  
73˚F  
~ 64˚F  
2
10  
12  
COOLEST  
3
To control the direction of the air flow, refer to page 8.  
E-6  
Airing Your Room  
If the atmosphere in your room is stale, you can air it using  
the Fan feature and if necessary, evacuate the stale air outside.  
1
If you wish to evacuate stale air outside, push the ventilation lever on the front  
of the unit to the right and the open position ( ).  
Result: The air inside the room circulates and stale air is evacuated outside.  
Otherwise, push the ventilation lever to the left and the closed position (  
Result: The air simply circulates inside the room.  
).  
2
Set the operating mode selection dial to the HI FAN or LOW FAN position.  
OPERATION  
OFF  
HI FAN : The fan turns rapidly.  
LOW FAN : The fan turns slowly.  
LOW  
FAN  
LOW  
COOL  
Result: The air conditioner starts up in Fan mode.  
3
To control the direction of the air flow, refer to page 8.  
HI  
COOL  
HI  
FAN  
Switching the Air Conditioner Off  
You can sw itch the air conditioner off w henever you w ant.  
1
To switch the unit off, simply set the operating mode selection dial  
to the OFF position.  
OPERATION  
OFF  
Result:  
The air conditioner stops operating.  
LOW  
FAN  
LOW  
COOL  
HI  
FAN  
HI  
COOL  
E-7  
Adjusting the Air Flow Direction Horizontally  
Depending on the position of the unit in your room, you can adjust the  
orientation of the inner air flow blades on the right-hand side of the  
unit, thus increasing the efficiency of the air conditioner.  
Hold the inner air flow blades, and adjust them to the desired direction.  
Adjusting the Air Flow Direction Vertically  
Again depending on the position of the unit in your room , you can  
adjust the orientation of the outer air flow blades on the right-hand  
side of the unit.  
RECOMMENDATION When...  
Adjust the blades to face...  
Cooling  
Upwards.  
Adjust the air flow blades to the desired position, by pushing them  
upwards or downwards.  
If you orient the air flow blades downwards and the unit operates  
in Cool mode for long periods of time, dew may:  
Form on the surface of the blades  
Drip from the blades  
E-8  
Operating Recommendation  
Here is a recommendation that you should follow w hen using your  
air conditioner.  
Topic  
Recommendation  
Power failure If a power failure occurs when the air conditioner is operating,  
the unit is switched off. When the power returns,  
the air conditioner starts up again automatically.  
Temperature and Humidity Ranges  
The follow ing table indicates the temperature and humidity ranges  
w ithin w hich the air conditioner can be used.  
Mode  
Outdoor  
Indoor  
Indoor Humidity  
Temperature  
Temperature  
Cooling  
69.8°F to 109.4°F approx.  
69.8°F to 89.6°F approx.  
80% or less  
If the air conditioner is used at...  
Then...  
Higher temperature  
The automatic protection feature may be triggered  
and the air conditioner stopped.  
Lower temperature  
A water leakage or some other malfunction may happen  
if the heat exchanger freezes.  
Higher humidity levels  
Water may condense on and drip from the surface of the unit  
if it is used for long periods.  
E-9  
Cleaning Your Air Conditioner  
To get the best possible use out of your air conditioner,  
you m ust clean it regularly to rem ove the dust on the air filter.  
Before cleaning your air conditioner, ensure that it is  
switched off and unplugged from the wall socket.  
1
Hold the handle of the air filter, pull it slightly forward, and then pull it  
out to the right side.  
2
3
Remove all dust on the air filter with a vacuum cleaner or brush.  
When you have finished, insert the air filter into the original position.  
4
Clean the outer surfaces with a damp cloth and mild detergent  
(do NOT use benzene, solvents or other chemicals).  
Wipe them dry with a clean, soft cloth.  
If you...  
Then...  
Will not be using the  
air conditioner for a  
long period of time  
Set the fan going for a few hours  
to dry the inside of the air conditioner  
thoroughly.  
Switch the air conditioner off and  
unplug it from the wall socket.  
Clean the filter and outer surfaces.  
Have not used the air  
conditioner for a long  
period of time  
Set the fan going for a few hours to  
dry the inside of the air conditioner  
thoroughly.  
E-10  
Solving Common Problems  
Before contacting the after-sales service, perform the follow ing simple checks.  
They may save you the time and expense of an unnecessary call.  
PROBLEM  
EXPLANATION / SOLUTION  
◆◆ Check that the circuit breaker used for the air conditioner  
The air conditioner does not  
operate at all  
has not been triggered.  
Check that the power cable is plugged into a wall socket and the  
socket is switched on, if necessary.  
Check that the correct operating mode has been selected  
(cooling or airing).  
Check that the correct operating mode has been selected.  
The air conditioner does not  
cool  
The room temperature may be too low.  
Dust may be blocking the air filter;  
refer to page 10 for cleaning instructions.  
Check that there is no obstacle blocking the air flow into or out of the unit.  
Air the room.  
Odours are permeated in the  
room during air conditioning  
Technical Specifications  
Design and specifications are subject to change w ithout notice.  
Model  
Power Supply  
AW0719  
AW0819  
115V~, 60Hz  
E-11  
Installation  
Before installation, be sure to check the installation area  
for the air conditioner, and installation method of the drain hose.  
Checkpoints prior to installation  
1 Check the cabinet and front grille of the unit for any harmful defects  
such as scratches.  
2 Be sure to check the power supply.  
- Refer to the specifications on the label attached to the unit.  
Installation Conditions  
1 Electrical Requirements  
For personal safety:  
◆◆ This appliance must be properly grounded. See installation instructions.  
◆◆ Do not, under any circumstances, cut or remove the third grounding  
prong from the power cord.  
◆◆ We recommend that you do not use an extension cord or an adapter  
plug with this appliance.  
◆◆ Do not change the plug on the power cord of this appliance.  
◆◆ Follow national electrical codes or local codes and ordinances.  
115V  
15 AMP circuit  
"parallel" type  
230V/208V  
20 AMP circuit  
"perpendicular" type  
230V/208V  
15 AMP circuit  
"tandem" type  
230V/208V  
30 AMP circuit  
"tandem" type  
◆◆ If the electric supply provided does not meet the above specifications,  
call a licensed electrician.  
◆◆ Aluminum house wiring may pose special problems - consult a qualified  
electrician.  
◆◆ This unit requires a separate circuit serving only this appliance.  
Window Requirements  
2
◆◆ Standard double - hung window with actual opening width of 251/2" to 37".  
The installation will need to be modified for windows other than  
the standard double-hung type.  
◆◆ Clear vertical opening of 143/4" minimum from bottom of sash to sill.  
251/2" to 37"  
◆◆ Install the air conditioner in a window where there will be enough  
clearance around the cabinet to allow ample circulation of air through  
the unit.  
143/4" min.  
All supporting parts should be secured to firm wood,  
masonry or metal.  
E-12  
Installation of the Drain Tube  
Fix the drain tube as shown in the figure.  
Rear  
Rubber cap  
Gasket  
Drain Tube  
Screws(2EA)  
Installation of the Drain Pan  
The procedure for installing the drain pan should be determined by the  
condition of the installing area.  
In the case of an area where the drain pan can not be directly  
installed on the rear side of the unit after installing the air conditioner.  
Example: High storage  
1
Hold the handle of the air filter, pull it slightly forward, and then pull it  
out to the right side.  
Screw  
2
3
Remove the screw.  
Disassemble the front grille.  
3-1 Hold the lower part of the front grille, and then move it slightly to  
the left side.  
3-2 Pull the lower part of the front grille slightly forward.(below three inches)  
3-3 Lift the front grille upward.  
Applying excessive force to disassemble the front grille  
Front grille  
may cause damage to the tab ; be sure not to use  
excessive force.  
4
5
Remove two screws on the lower, right and left sides of the unit.  
Remove the chassis from the cabinet.  
6
7
Remove the rubber cap inserted into the basepan.  
Fix the drain pan as shown in the figure, and then connect the drain hose.  
(You can use any commercially-available drain hose.)  
Drain Pan  
Rear  
8
Install the cabinet at the specified area after installing the drain pan,  
and then re-assemble it in the original condition.  
Rubber cap  
Drain Hose  
Screw  
In the case of an area where the drain pan can be directly installed  
on the rear side of the unit after installing the air conditioner.  
Bottom-Side View with  
Drain Pan and Hose in Place  
1
Follow steps 6 and 7 only  
E-13  
Installation  
Window installation  
Tools needed  
◆◆ Philips head screw driver  
◆◆ Adjustable wrench  
◆◆ Scissors  
◆◆ Ruler or tape measure  
◆◆ Pencil  
◆◆ Leveler  
Parts furnished  
Type A  
Type B  
Qty-17  
Type C  
Qty-2  
Type D  
Qty-2  
Qty-7  
Adhesive seal strip  
Window gasket  
Top channel  
Screw  
Hold the handle of the air filter, pull it slightly forward,  
and then pull it out to the right side.  
1
Remove the screw.  
2
3
Disassemble the front grille.  
3-1 Hold the lower part of the front grille, and then move it slightly to  
the left side.  
Front grille  
3-2 Pull the lower part of the front grille slightly forward. (below three inches)  
3-3 Lift the front grille upward.  
Applying excessive force to disassemble the front grille  
may cause damage to the tab ; be sure not to use  
excessive force.  
Remove two screws on the lower, right and left sides of the unit.  
4
5
Remove the chassis from the cabinet.  
E-14  
6
Attach the window filler panels to the cabinet.  
Top Channel  
6-1 Install the top "L" shaped cannel with three Type B screws provided.  
6-2 Slide the window filler panels and their frames into the channels on the  
top and bottom of the cabinet and assemble them to the cabinet using  
six Type B screws.  
7
Attach the support brackets to the cabinet.  
7-1 Select the Type D support bracket position that will place the bracket  
near the outermost point on the window sill. In most cabinets this will  
be the first set of holes. Using eight Type B screws, attach the  
support brackets to each side of the cabinet bottom.  
Type B  
Screws  
7-2 Thread the Type C bolts into the support brackets, making sure the  
cabinet maintains a slightly downward slant to the outside.  
A 1/4" slant, from the cabinet front to the rear, is necessary.  
Use the level to determine the slant.  
Type C Bolts  
8
Attach the seal strip to the window.  
8-1 Cut the adhesive-backed foam seal strip to the window width.  
8-2 Remove the backing from the seal strip and attach the strip to the  
underside of the bottom window.  
9
Install the cabinet in the window.  
9-1 Place the cabinet into the window with the frame on the top of the  
cabinet positioned just in front of the bottom window.  
Pull the window down until it rests on the cabinet just behind the top  
channel of the frame on the top of the cabinet.  
Top  
Channel  
9-2 Locate three screw holes along the cabinet bottom front edge.  
Center the cabinet, side to side, in the window and mount it to the  
window stool using three Type A screws.  
E-15  
Installation  
10 Extend the window filler panels.  
Screw  
10-1 When the window is pulled down, the window should rest on the  
cabinet just behind the window filler panel frames.  
10-2 Slide the filler panels outward until they touch the sides of the window.  
Secure the panels by putting four Type A screws through the mounting  
holes in the panels and driving them into the window stool and sash.  
Screw  
11 Slide the air conditioner into the cabinet.  
11-1 Carefully slide the air conditioner back into the cabinet.  
11-2 Reinstall the air conditioner-to-cabinet retaining screws removed  
in page 14.  
12 Install the window gasket.  
Cut the window gasket to the window width and stuff it between the  
window and the glass to prevent air and insects from getting into the room.  
13 Reinstall the grille.  
Refer to page 14.  
14 Check for air leaks.  
Some installations may require additional sealing around the window and  
air conditioner. Check for air leaks and seal.  
E-16  
YOUR SAMSUNG ROOM AIR CONDITIONER  
WARRANTY  
Limited Warranty to Original Purchaser  
Samsung will repair or replace, at our option, this product if found defective within the warranty  
period beginning from the original date of purchase. This Samsung Product is warranted by  
SAMSUNG ELECTRONICS America Inc. against manufacturing defects in materials or  
workmanship for the period specified.  
Labor  
Parts  
1 Year (In home)  
1 Year  
Limited 5-Years Compressor Warranty  
Within one year of purchase Samsung Electronics America Inc. will provide a replacement  
compressor if it is found to be defective in material or workmanship. During the existing four  
years (second through fifth year) Samsung Electronics America Inc. will provide a replacement  
only, without charge, if it is found to be defective in material or workmanship. Labor to install  
the compressor during these existing four years is not included in the warranty. All warranty  
repairs must be performed by a Samsung Authorized Service Station.  
Obligation of the Original Owner  
The original dated purchase receipt must be retained as proof of purchase and presented to  
the Authorized Serivec Station before warranty services are rendered.  
Exclusions of the Warranty  
This warranty does not cover damage due to accident, fire, flood and/or other Acts of God:  
misuse, incorrect line voltage, improper installation, improper or unauthorized repairs,  
commercial use, or damages which occur in shipping. Exterior and interior finish and plastic  
parts, are not covered under this warranty, Customer adjustments which are explained in the  
instruction manual are not covered under the terms of this warranty. This warranty will  
automatically be voided for any unit found with a missing or altered serial number.  
This warranty is valid only on products purchased and used in America.  
E-17  
ELECTRONICS  
SAMSUNG ELECTRONICS AMERICA INC.  
105 Challenger Road Ridgefield Park, NJ 07660.  
Printed in Korea  

Whirlpool Whispure Air Purifier User Manual
Samsung Scx 4x24 User Manual
Panasonic Kx Ft33hk User Manual
KENWOOD MULTIONE KHH30 02 User Manual
KENWOOD KRC 407 User Manual
JVC AV 20NN11 User Manual
HP DESKJET 640C C6464A User Manual
Ct87k4446 User Manual
BROTHER HL L2375DW 02 User Manual
BROTHER FAX 235 User Manual