Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Camera User Guide
•
•
•
Reading this guide will help you learn to use the camera
properly.
•
•
Click the buttons in the lower right to access other pages.
ENGLISH
: Next page
: Previous page
: Page before you clicked a link
To jump to the beginning of a chapter, click the chapter
title at right.
Index
Store this guide safely so that you can use it in the future.
From chapter title pages, you can access topics by
clicking their titles.
© CANON INC. 2014
CEL-SV3KA211
1
Before Use
•
•
•
Shooting modes and on-screen icons and text are indicated in brackets.
: Important information you should know
: Notes and tips for expert camera use
Part Names and Conventions in This Guide
Basic Guide
Advanced Guide
Camera Basics
• =xx: Pages with related information (in this example, “xx” represents a
page number)
•
•
Instructions in this guide apply to the camera under default settings.
For convenience, all supported memory cards are simply referred to as
the “memory card”.
The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
•
P Mode
Still Images
:
Indicates that the function is used when shooting or
viewing still images.
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Movies
:
Indicates that the function is used when shooting or
viewing movies.
Microphone
Lamp
Lens
Flash
N-Mark *
(
)
<h(Flash up)> switch
(Framing Assist – Seek)>
Zoom lever
<
button
Tripod socket
Shooting: <i(telephoto)> /
Index
<j(wide angle)>
Playback: <k(magnify)> /
DC coupler terminal cover
Memory card/battery cover
Strap mount
<g(index)>
Movie button
Shutter button
ON/OFF button
Wi-Fi antenna area
3
Before Use
•
•
In this guide, icons are used to represent the corresponding camera
buttons and dials on which they appear or which they resemble.
The following camera buttons and controls are represented by icons.
<o> Up button on back
Basic Guide
Advanced Guide
Camera Basics
<q> Left button on back
<r> Right button on back
<p> Down button on back
Auto Mode / Hybrid
Auto Mode
<5> Control dial on back
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Screen (LCD monitor)
Speaker
AV OUT (Audio/video output) /
DIGITAL terminal
HDMITM terminal
Mode dial
<l(Display)> button
(Mobile device connection)>
button
<
<b(Exposure compensation)> /
<
(Wi-Fi)> / Up button
<h(Flash)> / Right button
FUNC./SET button
<Q(Self-timer)> / <a(Single-
image erase)> / Down button
<1(Playback)> button
Control dial
<e(Macro)> / <f(Manual
focus)> / Left button
Index
<n> button
Indicator
zzTurning the control dial is one way to
choose setting items, switch images, and
perform other operations. Most of these
operations are also possible with the
<o><p><q><r> buttons.
4
Before Use
Table of Contents
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
Table of Contents...........................5
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
5
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
6
Before Use
Common Camera Operations
Applying special effects
Basic Guide
Advanced Guide
Camera Basics
4
Shoot
zzUse camera-determined settings
Vivid Colors
Poster Effect
Fish-Eye Effect
zzSee several effects applied to each shot, using camera-determined
settings (Creative Shot Mode) ............................................................. 53
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
Shooting people well
P Mode
Miniature Effect
Toy Camera Effect
Soft Focus
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
I P
Portraits
Against Snow
Monochrome
Matching specific scenes
zzFocus on faces......................................................................... 28, 55, 76
zzAdd a date stamp................................................................................. 38
zzUse Face ID................................................................................... 40, 92
Sports
Night Scenes
Index
t
Low Light
Fireworks
7
Before Use
1
View
Safety Precautions
Basic Guide
Advanced Guide
Camera Basics
zzOn a TV.............................................................................................. 157
zzOn a computer ................................................................................... 161
zzErase images..................................................................................... 101
• Before using the product, ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
• The safety precautions noted here are intended to prevent you and other
persons from being injured or incurring property damage.
• Be sure to also check the guides included with any separately sold
accessories you use.
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
Warning
Denotes the possibility of serious injury or death.
E
Shoot/View Movies
P Mode
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight.
In particular, remain at least 1 meter (3.3 feet) away from infants when
using the flash.
zzShoot movies ................................................................................. 28, 65
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
• Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a
child’s neck may result in asphyxiation.
c
Print
zzPrint pictures...................................................................................... 163
Save
• Use only recommended power sources.
• Do not disassemble, alter, or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• Do not touch the interior of the product if it is broken, such as when
dropped.
• Stop using the product immediately if it emits smoke or a strange
smell, or otherwise behaves abnormally.
Use Wi-Fi Functions
Index
zzShare images online ...........................................................................116
• Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
• Avoid contact with liquid, and do not allow liquid or foreign objects
inside.
This could result in electrical shock or fire.
If the product gets wet, or if liquid or foreign objects get inside, remove the
battery pack/batteries or unplug immediately.
8
Before Use
• Do not look through the viewfinder (if your model has one) at intense
light sources, such as the sun on a clear day or an intense artificial
light source.
• Do not allow the camera to maintain contact with skin for extended
periods.
Even if the camera does not feel hot, this may cause low-temperature
burns, manifested in redness of the skin or blistering. Use a tripod in hot
places, or if you have poor circulation or insensitive skin.
Basic Guide
Advanced Guide
Camera Basics
This could damage your eyesight.
• Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or fire. Immediately stop using the
product and distance yourself from it.
Caution
Denotes the possibility of injury.
Auto Mode / Hybrid
Auto Mode
• When carrying the product by the strap, be careful not to bang it,
subject it to strong impacts or shocks, or let it get caught on other
objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Use only the recommended battery pack/batteries.
• Do not place the battery pack/batteries near or in direct flame.
This may cause the battery pack/batteries to explode or leak, resulting in
electrical shock, fire, or injuries. If leaking battery electrolyte comes into
contact with eyes, mouth, skin, or clothing, immediately flush with water.
• If the product uses a battery charger, note the following precautions.
- Remove the plug periodically and, using a dry cloth, wipe away
any dust and dirt that has collected on the plug, the exterior of the
power outlet, and the surrounding area.
Other Shooting
Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers
or clothing.
This could result in burns or damage to the flash.
- Do not insert or remove the plug with wet hands.
- Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the plug is damaged or not fully inserted in the outlet.
- Do not allow dust or metal objects (such as pins or keys) to contact
the terminals or plug.
• Avoid using, placing, or storing the product in the following places:
- Places subject to direct sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty places
- Do not cut, damage, alter, or place heavy items on the power cord,
if your product uses one.
This could result in electrical shock or fire.
These could cause leakage, overheating, or an explosion of the battery
pack/batteries, resulting in electrical shock, fire, burns, or other injuries.
Overheating and damage may result in electrical shock, fire, burns,
or other injuries.
Index
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices is
restricted, such as inside airplanes and medical facilities.
• The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
• When using optional lenses, lens filters, or filter adapters
(if applicable), be sure to attach these accessories firmly.
If the lens accessory becomes loose and falls off, it may crack, and the
shards of glass may lead to cuts.
9
Before Use
• On products that raise and lower the flash automatically, make sure
to avoid pinching your fingers with the lowering flash.
This could result in injury.
• If your product uses multiple batteries, do not use batteries that
have different levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the + and –
terminals reversed.
Basic Guide
Advanced Guide
Camera Basics
Denotes the possibility of property damage.
Caution
This may cause the product to malfunction.
• Do not aim the camera at intense light sources, such as the sun on
a clear day or an intense artificial light source.
• Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
Auto Mode / Hybrid
Auto Mode
Doing so may damage the image sensor or other internal components.
• When putting the camera in your bag, ensure that hard objects do
not come into contact with the screen. Also close the screen (so that
it faces the body), if your product’s screen closes.
• Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
Other Shooting
Modes
• When using the camera on a sandy beach or at a windy location,
be careful not to allow dust or sand to enter the camera.
• On products that raise and lower the flash automatically, do not push
the flash down or pry it open.
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
This may cause the product to malfunction.
• Wipe off any dust, grime, or other foreign matter on the flash with
a cotton swab or cloth.
The heat emitted from the flash may cause foreign matter to smoke or the
product to malfunction.
• Remove and store the battery pack/batteries when you are not using
the product.
Any battery leakage that occurs may cause product damage.
• Before you discard the battery pack/batteries, cover the terminals
with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
Index
• Unplug any battery charger used with the product when not in use.
Do not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
• Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or explosion,
resulting in product damage or fire.
10
Basic Guide
Basic information and instructions, from initial preparations to shooting and playback
Initial Preparations........................................... 12 Trying the Camera Out..................................... 16
Attaching the Strap................................................12
Holding the Camera ..............................................12
Charging the Battery Pack ....................................12
Inserting the Battery Pack and Memory Card .......13
Setting the Date and Time.....................................14
Display Language .................................................16
Shooting (Smart Auto)...........................................16
Viewing..................................................................18
11
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
1 Insert the battery pack.
zzThread the end of the strap through the
zzAfter aligning the marks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).
2 Charge the battery pack.
zzCB-2LY: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
zzCB-2LYE: Plug the power cord into the
CB-2LY
charger, then plug the other end into a
power outlet.
zzThe charging lamp turns orange, and
charging begins.
Holding the Camera
zzWhen charging is finished, the lamp turns
green.
zzPlace the strap around your wrist.
zzWhen shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
CB-2LYE
12
Inserting the Battery Pack and Memory Card
3 Remove the battery pack.
zzAfter unplugging the battery charger,
remove the battery pack by pushing it in
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(
) and up ( ).
1 Open the cover.
• To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
zzSlide the cover ( ) and open it ( ).
• For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
2 Insert the battery pack.
zzWhile pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
• For details on charging time and the number of shots and recording time
• Charged battery packs gradually lose their charge, even when they are not
used. Charge the battery pack on (or immediately before) the day of use.
• The charger can be used in areas with 100 – 240 V AC power (50/60 Hz).
For power outlets in a different format, use a commercially available adapter
for the plug. Never use an electrical transformer designed for traveling, which
may damage the battery pack.
zzIf you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
Terminals
Battery
Lock
locks when inserted.
13
3 Check the card’s write-protect
tab and insert the memory card.
zzRecording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
Remove the memory card.
zzPush the memory card in until it clicks,
and then slowly release it.
zzThe memory card will pop up.
zzInsert the memory card facing as shown
until it clicks into the locked position.
zzMake sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Terminals
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
4 Close the cover.
zzLower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
1 Turn the camera on.
zzPress the ON/OFF button.
zzThe [Date/Time] screen is displayed.
• For guidelines on how many shots or hours of recording can be saved on one
Removing the Battery Pack and Memory Card
Remove the battery pack.
zzOpen the cover and press the battery
lock in the direction of the arrow.
zzThe battery pack will pop up.
14
2 Set the date and time.
zzPress the <q><r> buttons to choose an
option.
Changing the Date and Time
Adjust the date and time as follows.
zzPress the <o><p> buttons or turn the
<5> dial to specify the date and time.
zzWhen finished, press the <m> button.
1 Access the camera menu.
zzPress the <n> button.
2 Choose [Date/Time].
zzMove the zoom lever to choose the [3]
tab.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Date/Time], and
then press the <m> button.
3 Set the home time zone.
zzPress the <q><r> buttons to choose
your home time zone.
4 Finish the setup process.
zzPress the <m> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
3 Change the date and time.
zzFollow step 2 in “Setting the Date and
zzPress the <n> button to close the
menu.
zzTo turn off the camera, press the ON/OFF
button.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery pack or connect the camera to an AC adapter kit (sold
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Set the correct date and time as
• Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on.
Specify the correct information.
• To set daylight saving time (1 hour ahead), choose [
] in step 2 and then
choose [ ] by pressing the <o><p> buttons or turning the <5> dial.
15
Still Images
Movies
Display Language
Change the display language as needed.
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
1 Enter Playback mode.
zzPress the <1> button.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
2 Access the setting screen.
zzPress and hold the <m> button, and
then immediately press the <n>
button.
1 Turn the camera on.
zzPress the ON/OFF button.
zzThe startup screen is displayed.
3 Set the display language.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose a language,
and then press the <m> button.
zzOnce the display language has been set,
the setting screen is no longer displayed.
2 Enter [
] mode.
zzSet the mode dial to [
].
zzAim the camera at the subject.
The camera will make a slight clicking
noise as it determines the scene.
zzIcons representing the scene and image
stabilization mode are displayed in the
upper left of the screen.
zzFrames displayed around any detected
subjects indicate that they are in focus.
• The current time is displayed if you wait too long in step 2 after pressing the <m>
button before you press the <n> button. In this case, press the <m> button
to dismiss the time display and repeat step 2.
• You can also change the display language by pressing the <n> button
and choosing [Language
] on the [3] tab.
16
3 Compose the shot.
Shoot.
zzTo zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle).
zzPress the shutter button all the way
down.
zzAs the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
4 Shoot.
Shooting Still Images
Focus.
zzKeep the camera still until the shutter
sound ends.
zzPress the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
zzAfter displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
Start shooting.
zzPress the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
zzBlack bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
zzFrames displayed around any detected
faces indicate that they are in focus.
zzOnce recording begins, take your finger
off the movie button.
Elapsed Time
zzIf [Raise the flash] appears on the screen,
move the <h> switch to raise the flash.
It will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
17
Viewing
Finish shooting.
zzPress the movie button again to stop
shooting. The camera beeps twice as
recording stops.
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
zzPress the <1> button.
zzYour last shot is displayed.
2 Browse through your images.
zzTo view the previous image, press
the <q> button or turn the <5> dial
counterclockwise. To view the next
image, press the <r> button or turn the
<5> dial clockwise.
zzPress and hold the <q><r> buttons to
browse through images quickly.
zzTo access Scroll Display mode, turn the
5
5
<
<
> dial rapidly. In this mode, turn the
> dial to browse through images.
zzTo return to single-image display, press
m
the < > button.
18
zzMovies are identified by a [
To play movies, go to step 3.
] icon.
Erasing Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
1 Choose an image to erase.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
3 Play movies.
2 Erase the image.
zzPress the <m> button, choose [
]
zzPress the <p> button.
(either press the <o><p> buttons or
turn the <5> dial), and then press the
<m> button again.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [Erase], and then press the <m>
button.
zzPlayback now begins, and after the movie
is finished, [
] is displayed.
zzThe current image is now erased.
zzTo cancel erasure, press the <q><r>
buttons or turn the <5> dial to choose
[Cancel], and then press the <m>
button.
zzTo adjust the volume, press the <o><p>
buttons.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
19
Advanced Guide
Camera Basics
Other basic operations and more ways to enjoy your camera, including shooting and playback options
On/Off................................................................ 21 Using the FUNC. Menu .................................... 23
Power-Saving Features (Auto Power Down) ........21
Using Menus..................................................... 24
On-Screen Keyboard ....................................... 25
Indicator Display .............................................. 26
Clock ................................................................. 26
Shutter Button.................................................. 22
Shooting Modes ............................................... 22
Shooting Display Options ............................... 23
20
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specific period of
inactivity.
On/Off
Shooting Mode
zzPress the ON/OFF button to turn the
camera on and prepare for shooting.
zzTo turn the camera off, press the ON/OFF
button again.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off
Playback Mode
zzPress the <1> button to turn the camera
on and view your shots.
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of
inactivity.
zzTo turn the camera off, press the <1>
button again.
• You can deactivate Auto Power Down and adjust the timing of Display Off,
• Power saving is not active while the camera is connected to other devices via
• To switch to Playback mode from Shooting mode, press the <1> button.
• To switch to Shooting mode from Playback mode, press the shutter button
• The lens will be retracted after about one minute once the camera is in
Playback mode. You can turn the camera off when the lens is retracted by
pressing the <1> button.
21
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
Shooting Modes
Use the mode dial to access each shooting mode.
Live View Control Mode
P, Tv, Av, and M Modes
Customize image brightness
or colors when shooting
Take a variety of shots using
your preferred settings
1 Press halfway. (Press lightly to
focus.)
zzPress the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
Auto Mode /
Hybrid Auto Mode
Fully automatic shooting, with
camera-determined settings
Movie Mode
For shooting movies
You can also shoot movies
when the mode dial is not
set to Movie mode, simply
by pressing the movie
button.
2 Press all the way down. (From
the halfway position, press fully
to shoot.)
zzThe camera shoots, as a shutter sound
is played.
Creative Shot Mode
You can capture multiple still
images with effects using
camera-determined settings
Creative Filters Mode
Add a variety of effects to images
zzKeep the camera still until the shutter
sound ends.
Sports Mode
Shoot continuously as the camera
• Images may be out of focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Scene Mode
Shoot with optimal settings for
22
Shooting Display Options
Press the <l> button to view other information on the screen, or to hide
Using the FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
1 Access the FUNC. menu.
zzPress the <m> button.
Information is displayed
No information is displayed
2 Choose a menu item.
zzPress the <o><p> buttons or turn the
<5> dial to choose a menu item, and
then press the <m> or <r> button.
zzDepending on the menu item, functions
can be specified simply by pressing the
• Screen brightness is automatically increased by the night view function
when you are shooting under low light, making it easier to check how shots
are composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not affect recorded images.
<m> or <r> button, or another screen is
displayed for configuring the function.
Options
Menu Items
23
3 Choose an option.
Using Menus
Configure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting [4],
playback [1], and so on. Note that available menu items vary depending
zzPress the <o><p> buttons or turn the
<5> dial to choose an option.
zzOptions labeled with a [
be configured by pressing the <l>
button.
] icon can
zzTo return to the menu items, press the
<q> button.
1 Access the menu.
zzPress the <n> button.
4 Finish the setup process.
zzPress the <m> button.
zzThe screen before you pressed the
<m> button in step 1 is displayed again,
showing the option you configured.
2 Choose a tab.
zzMove the zoom lever to choose a tab.
zzAfter you have pressed the <o><p>
buttons or turned the <5> dial to choose
a tab initially, you can switch between
tabs by pressing the <q><r> buttons.
• To undo any accidental setting changes, you can restore the camera’s default
24
3 Choose a menu item.
On-Screen Keyboard
information you can enter varies depending on the function you are using.
zzPress the <o><p> buttons or turn the
<5> dial to choose a menu item.
zzFor menu items with options not shown,
first press the <m> or <r> button to
switch screens, and then either press the
<o><p> buttons or turn the <5> dial
to select the menu item.
Number of Available Characters
Entering Characters
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose a character,
and then press the <m> button to enter it.
zzThe amount of information you can enter varies
depending on the function you are using.
Moving the Cursor
zzTo return to the previous screen, press
the <n> button.
4 Choose an option.
zzChoose [ ] or [ ] and press the <m>
button.
zzPress the <q><r> buttons to choose an
option.
Entering Line Breaks
zzChoose [
Switching Input Modes
zzTo switch to numbers or symbols, choose
5 Finish the setup process.
zzPress the <n> button to return to the
screen displayed before you pressed the
<n> button in step 1.
] and press the <m> button.
[
] and press the <m> button.
zzTo switch between uppercase and
lowercase letters, choose [ ] and press
the <m> button.
zzAvailable input modes vary depending on
the function you are using.
• To undo any accidental setting changes, you can restore the camera’s default
Deleting Characters
zzChoose [ ] and press the <m> button.
The previous character will be deleted.
Confirming Input and Returning to
the Previous Screen
zzPress the <n> button.
25
Indicator Display
Clock
You can check the current time.
depending on the camera status.
Indicator
Status
zzPress and hold the <m> button.
zzThe current time appears.
zzIf you hold the camera vertically while
using the clock function, it will switch
to vertical display. Press the <q><r>
buttons or turn the <5> dial to change
the display color.
Color
Camera Status
On
Green
Starting up, recording/reading/transmitting images,
transmitting via Wi-Fi
zzPress the <m> button again to cancel
the clock display.
• When the indicator blinks green, never turn the camera off, open the
memory card/battery cover, or shake or jolt the camera, which may
corrupt images or damage the camera or memory card.
•
When the camera is off, press and hold the <m> button, then press the ON/OFF
button to display the clock.
26
Auto Mode / Hybrid Auto Mode
Convenient mode for easy shots with greater control over shooting
Shooting with Camera-Determined
Settings............................................................ 28
Shooting (Smart Auto)...........................................28
Shooting in Hybrid Auto Mode...............................30
Scene Icons ..........................................................32
Image Stabilization Icons ......................................33
On-Screen Frames................................................34
Common, Convenient Features...................... 34
Zooming In Closer on Subjects (Digital Zoom) .....34
Reacquiring Subjects Lost after Zooming
(Framing Assist – Seek)........................................35
Constantly Displaying Faces at the Same Size ....35
Using the Self-Timer..............................................37
Adding a Date Stamp............................................38
Continuous Shooting.............................................39
Using Face ID ................................................... 40 Customizing Camera Operation ..................... 50
Registering Face ID Information ...........................40
Shooting................................................................42
Checking and Editing Registered Information.......43
Deactivating the AF-Assist Beam..........................50
Deactivating the Red-Eye Reduction Lamp ..........50
Changing the Image Display Style after Shots......51
Image Customization Features....................... 46
Changing the Aspect Ratio....................................46
Changing Image Resolution (Size) .......................46
Red-Eye Correction...............................................47
Correcting Greenish Image Areas from
Mercury Lamps .....................................................47
Changing Movie Image Quality.............................48
Helpful Shooting Features .............................. 48
Displaying Grid Lines ............................................48
Magnifying the Area in Focus................................49
Checking for Closed Eyes.....................................49
27
Shooting with Camera-Determined
Settings
3 Compose the shot.
zzTo zoom in or out quickly, move the zoom
lever all the way toward <i> (telephoto)
or <j> (wide angle), and to zoom in
or out slowly, move it just a little in the
desired direction.
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Zoom Bar
Still Images
Movies
Shooting (Smart Auto)
1 Turn the camera on.
Focus Range (approx.)
zzPress the ON/OFF button.
zzThe startup screen is displayed.
4 Shoot.
Shooting Still Images
Focus.
2 Enter [
] mode.
zzSet the mode dial to [
zzPress the shutter button halfway.
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus.
].
zzAim the camera at the subject.
The camera will make a slight clicking
noise as it determines the scene.
zzSeveral AF frames are displayed when
multiple areas are in focus.
zzIcons representing the scene and image
stabilization mode are displayed in the
zzFrames displayed around any detected
subjects indicate that they are in focus.
28
zzIf [Raise the flash] appears on the screen,
move the <h> switch to raise the flash.
It will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Resize the subject and
recompose the shot as needed.
zzTo resize the subject, repeat the
However, note that the sound of camera
operations will be recorded, and movies
shot at zoom factors shown in blue will
look grainy.
Shoot.
zzPress the shutter button all the way
down.
zzWhen you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
zzAs the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
Finish shooting.
zzKeep the camera still until the shutter
sound ends.
zzPress the movie button again to stop
shooting. The camera beeps twice as
recording stops.
zzAfter displaying your shot, the camera will
revert to the shooting screen.
zzRecording will stop automatically when
the memory card becomes full.
Shooting Movies
Start shooting.
zzPress the movie button. The camera
beeps once as recording begins, and
• The flash firing during shots indicates that the camera has automatically
attempted to ensure optimal colors in the main subject and background
(Multi-area White Balance).
[
Rec] is displayed with the elapsed
Elapsed Time
time.
zzBlack bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
zzFrames displayed around any detected
faces indicate that they are in focus.
zzOnce recording begins, take your finger
off the movie button.
29
Still Images
Movies
• Battery life is shorter in this mode than in [
digest movies are recorded for each shot.
• A digest movie may not be recorded if you shoot a still image
immediately after turning the camera on, choosing [ ] mode,
or operating the camera in other ways.
] mode, because
Shooting in Hybrid Auto Mode
You can make a short movie of the day just by shooting still images.
The camera records 2 – 4-second clips of scenes before each shot,
which are later combined in a digest movie.
• Sounds and vibrations from operating the camera will be recorded
in digest movies.
1 Enter [ ] mode.
zzFollow step 2 in “Shooting (Smart Auto)”
• Digest movie quality is [
] and cannot be changed.
• Sounds are not played when you press the shutter button halfway or trigger
• Digest movies are saved as separate movie files in the following cases even if
they were recorded on the same day in [ ] mode.
2 Compose the shot.
- The digest movie file size reaches approximately 4 GB, or the total recording
time reaches approximately 13 minutes and 20 seconds.
zzFollow steps 3 – 4 in “Shooting (Smart
focus.
• Recorded shutter sounds cannot be modified or erased.
• If you prefer to record digest movies without still images, adjust the setting in
zzFor more impressive digest movies,
aim the camera at subjects about four
seconds before shooting still images.
3 Shoot.
zzFollow step 4 in “Shooting (Smart Auto)”
Digest Movie Playback
Display a still image shot in [ ] mode to play a digest movie, or specify the
zzThe camera records both a still image
and movie clip. The clip, which ends with
the still image and a shutter sound, forms
a single chapter in the digest movie.
30
Still Images/Movies
Movies
• If the camera is turned on while the <l> button is held down,
the camera will no longer sound. To activate sounds again, press
the <n> button and choose [Mute] on the [3] tab, and then
press the <q><r> buttons to choose [Off].
• The camera may become warm when shooting movies repeatedly
over an extended period. This does not indicate damage.
• Before shooting a movie, lower the flash
Microphone
with your finger. Be careful not to touch
the microphone when shooting a movie.
Leaving the flash raised, or blocking
the microphone may prevent audio
from being recorded or may cause the
recording to sound muffled.
Still Images
• A blinking [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.
• If your shots are dark despite the flash firing, move closer to the
• The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
• To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
• A blinking [h] icon displayed when you attempt to shoot indicates that
shooting is not possible until the flash has finished recharging. Shooting
can resume as soon as the flash is ready, so either press the shutter
button all the way down and wait, or release it and press it again.
• The shutter sound will not be played when the Sleeping and Babies
• Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• Once movie recording begins, the image display area changes and
subjects are enlarged to allow for correction of significant camera
shake. To shoot subjects at the same size shown before shooting,
• Audio is recorded in stereo.
• Distorted audio caused by recording when the wind is strong can be reduced.
However, the recording may sound unnatural when this option is used when
[4] tab > [Wind Filter] > [Off].
• Although you can shoot again before the shooting screen is
displayed, your previous shot may determine the focus, brightness,
and colors used.
31
Still Images
Movies
• The background color of [ ], [ ], [ ], [ ], and [ ] is dark blue, and the
background color of [ ] is orange.
Scene Icons
• When shooting movies, only People, Other Subjects, and At Close Range icons will
be displayed.
In [ ] and [
] modes, shooting scenes determined by the camera
are indicated by the icon displayed, and corresponding settings are
automatically selected for optimal focusing, subject brightness, and color.
• When shooting in [ ] mode, only People, Shadows on Face, Other Subjects, and
At Close Range icons will be displayed.
• When shooting with the self-timer, People (In Motion), Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), Children, Other Subjects (In Motion) icons will not be
displayed.
Background
Normal Backlit
Dark*
Sunsets Spotlights
Subject
People
and when [Hg Lamp Corr.] is set to [On] and scenes are automatically corrected
• If the flash is set to [ ], the Backlit icons for Smiling and Children will not be
displayed.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
In Motion
Shadows on Face
Smiling
–
• Babies, Babies (Smiling), Babies (Sleeping), and Children icons will be displayed
when [Face ID] is set to [On], and the face of a registered baby (under two years old)
Sleeping
Babies
actual shooting conditions, or if it is not possible to shoot with your
expected effect, color, or brightness.
Smiling
Sleeping
Children (In Motion)
Other Subjects
In Motion
–
–
–
–
–
At Close Range
* Tripod Used
The background color of icons is light blue when the background is a blue sky,
dark blue when the background is dark, and gray for all other backgrounds.
The background color of icons is light blue when the background is a blue sky,
and gray for all other backgrounds.
32
Still Images
Movies
Continuous Shooting Scenes
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in [
If you shoot a still image when the following scene icons are displayed,
the camera will shoot continuously. If you press the shutter button halfway
when one of the icons in the table below is displayed, one of the following
icons will be displayed to inform you that the camera will shoot continuous
images: [ ], [ ], or [W].
]
and [
] modes.
Image stabilization for movies,
reducing strong camera shake,
Image stabilization for still
images (Normal)
:
Consecutive images are captured, and the camera
analyzes details such as facial expressions to save
the image determined to be the best.
as when shooting while walking
(Dynamic)
Smiling (including Babies)
Sleeping (including Babies)
Children
Image stabilization for slow
camera shake, such as when
shooting movies at telephoto
(Powered)
Image stabilization for still
images when panning
(Panning)*
:
Beautiful shots of sleeping faces, created by
combining consecutive shots to reduce camera
shake and image noise.
The AF-assist beam will not light up, the flash will
not fire, and the shutter sound will not be played.
No image stabilization, because
the camera is mounted on
a tripod or held still by other
means.
Image stabilization for macro
shots (Hybrid IS)
During movie recording,
W: So you don’t miss a photo opportunity of children
who move around, the camera will capture three
consecutive images for each shot.
However, during movie
[
] is displayed, and image
recording, [
] is displayed,
stabilization for macro movie
recording is used.
and image stabilization to
• In some scenes, expected images may not be saved, and images
may not look as expected.
• Focus, image brightness, and color are determined by the first shot.
counteract wind or other sources
of vibration is used (Tripod IS).
* Displayed when you pan, following moving subjects with the camera. When you follow
subjects moving horizontally, image stabilization only counteracts vertical camera
shake, and horizontal stabilization stops. Similarly, when you follow subjects moving
vertically, image stabilization only counteracts horizontal camera shake.
• When you want to shoot single images only, press the <m> button, choose
[
] in the menu, and then select [ ].
an IS icon is not displayed.
• In [ ] mode, no [
] icon is displayed.
33
Still Images
Movies
Common, Convenient Features
On-Screen Frames
] mode, a variety of frames are displayed once the camera detects
subjects you are aiming the camera at.
Still Images
Movies
In [
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 120x enlargement.
•
•
A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
1
Move the zoom lever toward <i>.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
zzHold the lever until zooming stops.
zzZooming stops at the largest possible
zoom factor (before the image becomes
noticeably grainy), which is then indicated
on the screen.
When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus and
image brightness are constantly adjusted (Servo AF).
Zoom Factor
frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.
2 Move the zoom lever toward
<i> again.
zzThe camera zooms in even closer on the
subject.
• Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change depending
on the zoom range.
-
White range: optical zoom range where the image will not appear grainy.
- Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
following step 1.
34
• Some shooting information is not displayed while the camera is
zoomed out.
• During movie shooting, the white frame is not displayed if you press
the < > button. Also note that a changed zoom factor and camera
operating sounds will be recorded.
Zoom] > [Off].
Still Images
Reacquiring Subjects Lost after Zooming
(Framing Assist – Seek)
Movies
• If you prefer to shoot at the zoom factor of the screen in step 1, press the
shutter button all the way down.
• You can adjust the zoom factor that the camera will revert to after Zoom
Framing Assist (when you release the < > button) by moving the zoom lever
as you hold the < > button to resize the white frame.
If you lose track of a subject while zooming in, you can find it more easily by
temporarily zooming out.
• To adjust how much the camera zooms out when the < > button is pressed,
1 Look for the lost subject.
zzPress and hold the < > button.
zzThe camera zooms out and displays a
white frame around the area previously
[
Display Area].
• The zoom factor cannot be changed with the < > button after you press the
Still Images
Movies
shown (before you pressed the <
button).
>
Constantly Displaying Faces at the Same Size
a constant face size relative to the screen. If the person moves closer, the
camera will automatically zoom out, and vice versa.
1 Determine the desired face size.
zzMove the zoom lever as needed until the
face is the desired size, relative to the
screen.
2 Reacquire the subject.
2 Enter Auto mode.
zzPress and release the < > button
quickly.
zzAim the camera so that the subject enters
the white frame, and then release the
<
> button.
zz[ Auto: On] is displayed.
zzThe previous magnification is now
restored, so that the area outlined in
white fills the screen again.
35
Still Images
Movies
3 Choose the face.
zzOnce faces are detected, [ ] is
displayed.
Easily Reacquiring Lost Subjects
If zooming in causes you to lose track of a subject, and you move the
camera to look for them, the camera can automatically zoom out to help you
find the subject.
zzIf multiple faces are detected, press
the <o> button to switch to the desired
subject.
zz[ ] is displayed around the face that
the camera will continue to display at the
same size.
2 Look for the lost subject.
zzWhen you move the camera to look for
the subject, the camera zooms out to
help you find them.
4 Shoot.
zzEven after you shoot, [ ] remains
around the face displayed at a constant
size.
3 Reacquire the subject.
zzOnce you find the subject and stop
moving the camera, the camera zooms
in again.
zzTo cancel constant face size display,
press the < > button again. [ Auto:
Off] is displayed.
• Faces may not be displayed at a constant size at some zoom
factors, or if the subject’s head is tilted or facing the camera
indirectly.
• During movie recording, a changed zoom factor and camera
operating sounds will be recorded.
• In
Auto mode, some shooting information is not displayed, and
some shooting settings cannot be configured.
• If the person whose face is framed with [ ] moves toward the edge of the
screen, the camera zooms out to keep the person in view.
• In step 3, switching [ ] to another face with the <o> button is not possible
during movie recording.
• The zoom factor will remain the same after you press the shutter button all the
• This feature is not activated even if you press the < > button when choosing
4 Shoot.
zzTo cancel this mode, press the <
>
button again. [ Auto: Off] is displayed.
• Zooming is not possible while the shutter button is pressed halfway.
Auto] > [Off].
36
Still Images
Movies
zzOnce you start the self-timer, the lamp
will blink and the camera will play a
self-timer sound.
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
zzTwo seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
zzTo cancel shooting after you have
triggered the self-timer, press the
<n> button.
1 Configure the setting.
zzPress the <p> button, choose []] (either
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button.
zzTo restore the original setting, choose
[
] in step 1.
zzOnce the setting is complete, []] is
displayed.
Still Images
Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
2 Shoot.
zzFollow step 1 in “Using the Self-Timer”
zzOnce the setting is complete, [[] is
zzFor Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
displayed.
zzFor Movies: Press the movie button.
zzFollow step 2 in “Using the Self-Timer”
37
Still Images
Movies
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [$].
zzFollowing step 1 in “Using the Self-Timer”
<n> button immediately.
1 Configure the setting.
zzPress the <n> button, choose
2 Configure the setting.
zzPress the <o><p> buttons to choose
[Delay] or [Shots].
[Date Stamp
] on the [4] tab, and
zzOnce the setting is complete, [ ] is
displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose a value, and then
press the <m> button.
zzOnce the setting is complete, [$] is
displayed.
zzFollow step 2 in “Using the Self-Timer”
2 Shoot.
zzAs you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
zzTo restore the original setting, choose
[Off] in step 1.
• When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the
flash fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
• Date stamps cannot be edited or removed.
• When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the flash fires.)
38
• During continuous shooting, focus and exposure are locked at the
position/level determined when you pressed the shutter button
halfway.
• Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may
cause it to be printed twice.
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
Still Images
Continuous Shooting
In [
] mode, hold the shutter button all the way down to shoot
continuously.
For details on the continuous shooting speed, see “Continuous Shooting
1 Configure the setting.
zzPress the <m> button, choose
[
] in the menu, and then choose [W]
zzOnce the setting is complete, [W] is
displayed.
2 Shoot.
zzHold the shutter button all the way down
to shoot continuously.
39
Registering Face ID Information
You can register information (face info, names, birthdays) for up to 12
people to use with Face ID.
Using Face ID
If you register a person ahead of time, the camera will detect that person’s
face, and prioritize focus, brightness, and color for that person when
shooting. In [
] mode, the camera can detect babies and children based
on registered birthdays and optimize settings for them when shooting.
This function is also useful when searching for a specific registered person
1 Access the setting screen.
zzPress the <n> button, choose [Face
ID Settings] on the [4] tab, and then
Personal Information
•
•
Information such as images of a face (face info) registered with Face ID,
and personal information (name, birthday) will be saved on the camera.
Additionally, when registered people are detected, their names will be
recorded in still images. When using the Face ID function, be careful
when sharing the camera or images with others, and when posting
images online where many others can view them.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Add to Registry],
and then press the <m> button.
When disposing of a camera or transferring it to another person after
using Face ID, be sure to erase all information (registered faces, names,
zzPress the <o><p> buttons or turn the
<5> dial to choose [Add a New Face],
and then press the <m> button.
40
2 Register face information.
zzAim the camera so that the face of the
person you want to register is inside the
gray frame at the center of the screen.
zzA white frame on the person’s face
indicates that the face is recognized.
Make sure a white frame is displayed on
the face, and then shoot.
zzTo register a birthday, on the [Edit Profile]
screen, choose [Birthday] (either press
the <o><p> buttons or turn the <5>
dial), and then press the <m> button.
zzPress the <q><r> buttons to choose an
option.
zzPress the <o><p> buttons or turn the
<5> dial to specify the date.
zzWhen finished, press the <m> button.
zzIf the face is not recognized, you cannot
register face information.
zzAfter [Register?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [OK], and then press the <m>
button.
zzThe [Edit Profile] screen is displayed.
3 Register the person’s name and
birthday.
zzPress the <m> button to access the
keyboard, and then enter the name
41
Shooting
4 Save the settings.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Save], and then
press the <m> button.
If you register a person ahead of time, the camera will prioritize that person
as the main subject, and optimize focus, brightness, and color for that
person when shooting.
zzAfter a message is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [Yes], and then press the <m>
button.
zzWhen you point the camera toward a
subject, the names of up to 3 registered
people will be displayed when they are
detected.
5 Continue registering face
information.
zzShoot.
zzTo register up to 4 more points of face
information (expressions or angles),
repeat step 2.
zzDisplayed names will be recorded in still
images. Even if people are detected, but
their names are not displayed, the names
(up to 5 people) will be recorded in the
image.
zzRegistered faces are more easily
recognized if you add a variety of face
information. In addition to a head-on
angle, add a slight side angle, a shot
when smiling, and shots inside and
outside.
• People other than those registered may be mistakenly detected as
the registered person if they share similar facial features.
• The flash will not fire when following step 2.
• If you do not register a birthday in step 3, Babies or Children icons
• You can overwrite registered face info, and add face info later if you have not
42
Checking and Editing Registered Information
• Registered people may not be correctly detected if the captured image or
scene differs drastically from the registered face information.
• If a registered face is not detected, or not easily detected, overwrite registered
information with new face info. Registering face info right before shooting will
allow for easier detection of registered faces.
• If a person is mistakenly detected as another person and you continue
shooting, you can edit or erase the name recorded in the image during
1 Access the [Check/Edit Info]
screen.
zzFollowing step 1 in “Registering Face ID
Edit Info] and press the <m> button.
• Because faces of babies and children change quickly as they grow, you should
be recorded in the image.
• If you don’t want names to be recorded in still images, choose [Face ID
Settings] on the [4] tab, choose [Face ID], and then choose [Off].
• You can check names recorded in images in the playback screen (simple
• In [ ] mode, names are not displayed on the shooting screen, but they will be
recorded in still images.
recorded in the same position as for the first shot, even if subjects move.
2 Choose a person to check or
edit.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose the person
to check or edit, and then press the <m>
button.
3 Check or edit the information as
needed.
zzTo check a name or birthday, choose
[Edit Profile] (either press the <o><p>
buttons or turn the <5> dial), and
then press the <m> button. On the
screen displayed, you can edit names
or birthdays as described in step 3
of “Registering Face ID Information”
43
zzTo check face information, choose
[Face Info List] (either press the
Overwriting and Adding Face Information
You can overwrite existing face information with new face info. You should
update face information regularly, especially with babies and children, as
their faces change quickly as they grow.
You can also add face information when all 5 face info slots have not been
filled.
<o><p> buttons or turn the <5> dial),
and then press the <m> button. Press
the <m> button on the screen displayed,
choose face information to erase by
pressing the <o><p><q><r> buttons
or turning the <5> dial, and then
1 Access the [Add Face Info]
screen.
zzFollowing step 1 in “Registering Face ID
Info] and press the <m> button.
press the < > button. After [Erase?] is
m
displayed, choose [OK] (either press the
<q><r> buttons or turn the <5> dial),
and then press the <m> button.
• Even if you change names in [Edit Profile], the names recorded in
previously shot images will remain the same.
2 Choose the name of the person
to overwrite.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose the name
of a person whose face info you want
to overwrite, and then press the <m>
button.
entered with the software may not display on the camera, but will be correctly
recorded in images.
zzIf five items of face info have already
been registered, a message will be
displayed. Choose [OK] (either press the
<q><r> buttons or turn the < > dial),
5
and then press the <m> button.
zzIf less than five items of face info are
registered, go to step 4 to add face
information.
44
3 Choose the face info to
overwrite.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose the face info
to overwrite, and then press the <m>
button.
Erasing Registered Information
You can erase information (face info, names, birthdays) registered to Face
ID. However, names recorded in previously shot images will not be erased.
1 Access the [Erase Info] screen.
zzFollow step 1 in “Registering Face ID
[Erase Info].
4 Register face information.
zzFollow step 2 in “Registering Face ID
register the new face information.
zzRegistered faces are more easily
recognized if you add a variety of face
information. In addition to a head-on
angle, add a slight side angle, a shot
when smiling, and shots inside and
outside.
2 Choose the name of the person
whose info you want to erase.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose the name
of a person to erase, and then press the
<m> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [OK], and then press the <m>
button.
• You cannot add face information if all 5 information slots are filled. Follow the
steps above to overwrite face information.
• You can follow the above steps to register new face info when there is at least
one slot open; however, you cannot overwrite any face information. Instead
• If you erase a registered person’s info, you will not be able to
45
Still Images
Image Customization Features
Changing Image Resolution (Size)
Still Images
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each resolution setting can fit on a memory card, see
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
zzThe option you configured is now
displayed.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
zzOnce the setting is complete, the screen
aspect ratio will be updated.
zzTo restore the original setting, repeat this
process but choose [ ].
zzTo restore the original setting, repeat this
process but choose [ ].
Guidelines for Choosing Resolution Based on Paper
Size (for 4:3 Images)
Used for display on widescreen HDTVs or similar display devices.
Same aspect ratio as 35mm film, used for printing images at 5 x 7-inch or
A2 (16.5 x 23.4 in.)
postcard sizes.
zz[ ]: For e-mailing images.
Native aspect ratio of the camera screen, also used for display on standard-
definition televisions or similar display devices, or for printing images at 3.5 x
5-inch or A-series sizes.
A3 – A5 (11.7 x 16.5
– 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
Square aspect ratio.
• Not available in [ ] mode.
• Not available in [ ] mode.
46
Still Images
Still Images
Red-Eye Correction
Red-eye that occurs in flash photography can be automatically corrected as
Correcting Greenish Image Areas from
Mercury Lamps
follows.
In [
] mode, subjects or background in shots of evening scenes
illuminated by mercury lamps may appear to have a greenish tinge.
This greenish tinge can be corrected automatically when shooting, using
Multi-area White Balance.
1 Access the [Flash Settings]
screen.
zzPress the <n> button, choose
zzPress the <n> button, choose
[Hg Lamp Corr.] on the [4] tab, and
zzOnce the setting is complete, [ ] is
displayed.
[Flash Settings] on the [4] tab, and
m
zzTo restore the original setting, repeat this
process but choose [Off].
2 Configure the setting.
zzChoose [Red-Eye Corr.], and then
• After you are finished shooting under mercury lamps, you should set
[Hg Lamp Corr.] back to [Off]. Otherwise, green hues not caused by
mercury lamps may be corrected by mistake.
zzOnce the setting is complete, [R] is
displayed.
zzTo restore the original setting, repeat this
process but choose [Off].
• Try taking some test shots first to make sure you obtain the desired results.
changed.
•
Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for example).
• You can also access the screen in step 2 when the flash is up by pressing the
<r> button and immediately pressing the <n> button.
47
Movies
Helpful Shooting Features
Changing Movie Image Quality
4 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
Still Images
Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
zzPress the <m> button, choose [
in the menu, and choose the desired
zzThe option you configured is now
displayed.
]
zzPress the <n> button, choose
[Grid Lines] on the [4] tab, and then
zzOnce the setting is complete, grid lines
are displayed on the screen.
zzTo restore the original setting, repeat this
process but choose [
].
zzTo restore the original setting, repeat this
process but choose [Off].
Image
Quality
Resolution
1920 x 1080
Frame Rate
Details
• Grid lines are not recorded in your shots.
60 fps
30 fps
30 fps
30 fps
For shooting in Full HD.
[
smoother motion
] enables movies with
1920 x 1080
1280 x 720
640 x 480
For shooting in HD
For shooting in standard
definition
• In [
], [
], and [
] modes, black bars displayed on the top and
bottom edges of the screen indicate image areas not recorded.
48
Still Images
Still Images
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
Checking for Closed Eyes
] is displayed when the camera detects that people may have closed
[
their eyes.
1 Configure the setting.
zzPress the <n> button, choose
[AF-Point Zoom] on the [4] tab, and
1 Configure the setting.
zzPress the <n> button, choose
[Blink Detection] on the [4] tab, and
2 Shoot.
2 Check the focus.
zzPress the shutter button halfway.
The face detected as the main subject is
now magnified.
zz[ ] flashes when the camera detects
a person whose eyes are closed.
zzTo restore the original setting, choose
[Off] in step 1.
zzTo restore the original setting, choose
[Off] in step 1.
• When you have specified multiple shots in [$] mode, this function is only
available for the final shot.
• A frame is displayed around people whose eyes are closed when you have
• This feature is not available during continuous shooting in [ ] mode
• The area in focus is not magnified in the following cases when the shutter
button is pressed halfway.
- If a face was not detected, if the person is too close to the camera and their
face is too large for the screen, or if the camera detects subject movement
• Not available in [ ] mode.
49
Still Images
Customizing Camera Operation
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce
Customize shooting functions on the MENU [4] tab as follows.
red-eye when the flash is used in low-light shots.
Still Images
1 Access the [Flash Settings]
screen.
zzPress the <n> button, choose
[Flash Settings] on the [4] tab, and
Deactivating the AF-Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
zzPress the <n> button, choose
[AF-assist Beam] on the [4] tab, and
zzTo restore the original setting, repeat this
process but choose [On].
2 Configure the setting.
zzChoose [Red-Eye Lamp], and then
zzTo restore the original setting, repeat this
process but choose [On].
50
Still Images
Changing the Screen Displayed after Shots
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
Change the way images are displayed after shots as follows.
1 Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold]
Changing the Image Display Period after Shots
2 Configure the setting.
zzPress the <o><p> buttons or turn
the <5> dial to choose [Display Info].
Press the <q><r> buttons to choose the
desired option.
1 Access the [Review image after
shooting] screen.
zzPress the <n> button, choose
[Review image after shooting] on the
[4] tab, and then press the <m> button
zzTo restore the original setting, repeat this
process but choose [Off].
2 Configure the setting.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Display Time].
Press the <q><r> buttons to choose the
desired option.
Off
Displays only the image.
Detailed
[Off] and cannot be changed.
• By pressing the <l> button while an image is displayed after shooting,
you can switch the display information. Note that the settings of [Display Info]
are not changed. By pressing the <m> button, you can do the following
operations.
zzTo restore the original setting, repeat this
process but choose [Quick].
Quick
Displays images only until you can shoot again.
2 sec., 4 sec., Displays images for the specified time. Even while the shot is displayed,
8 sec.
Hold
Off
you can take another shot by pressing the shutter button halfway again.
Displays images until you press the shutter button halfway.
No image display after shots.
51
Other Shooting Modes
Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special
functions
Enjoying a Variety of Images
from Each Shot (Creative Shot)..................... 53
Image Effects (Creative Filters) ...................... 57 Shooting Various Movies ................................ 65
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect) ...................................................58
Shots Resembling Miniature Models
Shooting Movies in [E] Mode ..............................65
Shooting iFrame Movies .......................................66
Shooting Super Slow Motion Movies ....................66
Brightness / Color Customization
(Live View Control) ......................................... 54
(Miniature Effect)...................................................58
Shooting with a Toy Camera Effect
(Toy Camera Effect) ..............................................59
Shooting with a Soft Focus Effect .........................60
Shooting in Monochrome ......................................60
Auto Shooting after Face Detection
Moving Subjects (Sports)................................ 54
Specific Scenes................................................ 55
(Smart Shutter)......................................................61
High-Speed Continuous Shooting
(High-Speed Burst HQ).........................................64
52
Still Images
• Shooting will take some time when the flash fires, but hold the camera steady
until the shutter sound is played three times.
• Simultaneous display of the six images as shown in step 2 is only available
immediately after you shoot.
Enjoying a Variety of Images from
Each Shot (Creative Shot)
The camera determines the subject and shooting conditions, automatically
applying special effects and recomposing the shot to emphasize the
subject. Six still images are recorded for each shot. You can capture
multiple still images with effects using camera-determined settings.
Still Images
Choosing Effects
You can choose effects for images captured in [ ] mode.
1 Enter [ ] mode.
zzAfter choosing [ ] mode, press the
<l> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose the effect, and then
press the <m> button.
zzSet the mode dial to [ ].
2 Shoot.
zzPress the shutter button all the way
down. As you shoot, the shutter sound is
played three times.
zzAfter the six images are displayed
in succession, they are displayed
simultaneously for about two seconds.
zzTo keep the images displayed until
you press the shutter button halfway,
press the <m> button. For full-screen
display in this state, choose an image by
pressing the <o><p><q><r> buttons,
and then press the <m> button.
zzTo return to the original display, press the
<n> button.
Auto
All effects
Retro
Images resemble old photos
Images are generated in one color
Bold, distinctive-looking images
Subdued, natural-looking images
Monochrome
Special
Natural
53
Still Images
Brightness / Color Customization
(Live View Control)
Movies
Still Images
Moving Subjects (Sports)
Shoot continuously as the camera focuses on moving subjects.
Image brightness or colors when shooting can be easily customized as
follows.
1 Enter [ ] mode.
zzSet the mode dial to [ ].
1 Enter [
] mode.
zzSet the mode dial to [
].
2 Focus.
zzWhile you are pressing the shutter button
halfway, the camera will continue to
adjust focus and image brightness where
the blue frame is displayed.
2 Configure the setting.
zzPress the <m> button to access the
setting screen. Press the <o><p>
buttons to choose a setting item, and
then press the <q><r> buttons or turn
3 Shoot.
zzHold the shutter button all the way down
to shoot continuously.
5
the < > dial to adjust the value as you
watch the screen.
zzShooting stops when you release the
shutter button or reach the maximum
number of shots, after which [Busy] is
displayed and the shots are shown in the
order you took them.
zzPress the <m> button.
3 Shoot.
For brighter images, adjust the level to the right, and for darker
images, adjust it to the left.
Brightness
Color
• Continuous shooting is not available in
For more vivid images, adjust the level to the right, and for more
subdued images, adjust it to the left.
For a warm, reddish tone, adjust the level to the right, and for a cool,
bluish tone, adjust it to the left.
Tone
54
Specific Scenes
increased to suit the shooting conditions.
• There may be a delay after continuous shooting before you can shoot again.
Note that some types of memory cards may delay your next shot even longer.
SD Speed Class 6 or higher memory cards are recommended.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
1 Enter [K] mode.
zzSet the mode dial to [K].
Image Display during Playback
2 Choose a shooting mode.
zzPress the <m> button, choose [I] in the
menu, and then choose a shooting mode
Each set of images shot continuously is managed as a single group, and
only the first image in that group will be displayed. To indicate that the
image is part of a group, [
] is displayed in the upper left of the screen.
also erased. Be careful when erasing images.
• Grouped images can be viewed individually when played back using Image
temporarily ungrouped.
• The following actions are not available for grouped images: editing Face
3 Shoot.
Still Images
Movies
IShoot portraits (Portrait)
zzTake shots of people with a softening
effect.
55
Still Images
Still Images
Movies
Shoot evening scenes without
using a tripod (Handheld
NightScene)
tShoot fireworks (Fireworks)
zzVivid shots of fireworks.
zzBeautiful shots of evening scenes or
portraits with evening scenery in the
background, without the need to hold the
camera very still (as with a tripod).
zzA single image is created by combining
consecutive shots, reducing camera
shake and image noise.
• Subjects appear larger in [ ] mode compared to other modes.
• In [ ] mode, shots may look grainy because the ISO speed
• Because the camera will shoot continuously in [ ] mode, hold it
steady while shooting.
• In [ ] mode, excessive motion blur or certain shooting conditions
may prevent you from obtaining the desired results.
• In [t] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
Still Images
Shoot under low light (Low Light)
zzShoot with minimal camera and subject
shake even in low-light conditions.
• When you use a tripod for evening scenes, shooting in [
] mode instead of
[
Still Images
Movies
• [ ] mode resolution is [ ] (2304 x 1728) and cannot be changed.
• In [t] mode, although no frames are displayed when you press the shutter
button halfway, optimal focus is still determined.
PShoot with snowy backgrounds
(Snow)
zzBright, natural-colored shots of people
against snowy backgrounds.
56
Image Effects (Creative Filters)
Still Images
Movies
Shoot in vivid colors
(Super Vivid)
zzShots in rich, vivid colors.
Add a variety of effects to images when shooting.
1 Enter [ ] mode.
zzSet the mode dial to [ ].
Still Images
Movies
2 Choose a shooting mode.
zzPress the <m> button, choose [ ] in
the menu, and then choose a shooting
Posterized shots (Poster Effect)
zzShots that resemble an old poster or
illustration.
• In [ ] and [ ] modes, try taking some test shots first, to make sure
you obtain the desired results.
3 Shoot.
57
Still Images
Still Images
Shots Resembling Miniature Models
(Miniature Effect)
Movies
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect)
Shoot with the distorting effect of a fish-eye lens.
Creates the effect of a miniature model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is
not recorded.
1 Choose [ ].
zzFollow steps 1 – 2 in “Image Effects
[
].
2 Choose an effect level.
zzPress the <l> button, choose an
effect level (either press the <q><r>
buttons or turn the <5> dial), and then
press the <l> button again.
1 Choose [ ].
zzFollow steps 1 – 2 in “Image Effects
[
].
zzA white frame is displayed, indicating the
image area that will not be blurred.
zzA preview is shown of how your shot will
look with the effect applied.
2 Choose the area to keep in
focus.
zzPress the <l> button.
zzMove the zoom lever to resize the frame,
and press the <o><p> buttons to
move it.
3 Shoot.
• Try taking some test shots first, to make sure you obtain the desired
results.
3 For movies, choose the movie
playback speed.
zzPress the <n> button, and then
choose the speed by pressing the
<q><r> buttons or turning the <5>
dial.
58
Still Images
4 Return to the shooting screen
and shoot.
zzPress the <n> button to return to the
shooting screen, and then shoot.
Shooting with a Toy Camera Effect
(Toy Camera Effect)
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
Playback Speed and Estimated Playback Time (for One-
Minute Clips)
1 Choose [ ].
Speed
Playback Time
zzFollow steps 1 – 2 in “Image Effects
Approx. 12 sec.
[
].
Approx. 6 sec.
Approx. 3 sec.
2 Choose a color tone.
zzPress the <l> button, choose a color
tone (either press the <q><r> buttons or
turn the <5> dial), and then press the
<l> button again.
• The zoom is not available when shooting movies. Be sure to set the
zoom before shooting.
• Try taking some test shots first, to make sure you obtain the desired
results.
zzA preview is shown of how your shot will
look with the effect applied.
• To switch the orientation of the frame (from horizontal to vertical or vice-versa),
press the <m> button in step 2. You can move the frame in vertical orientation
by pressing the <q><r> buttons.
• Holding the camera vertically will change the orientation of the frame.
• Movie image quality is [ ] at an aspect ratio of [ ] and [ ] at an aspect
• The zoom factor cannot be changed with the < > button on the screens in
steps 2 and 3, or while shooting movies.
3 Shoot.
Standard Shots resemble toy camera images.
Warm
Cool
Images have a warmer tone than with [Standard].
Images have a cooler tone than with [Standard].
• Try taking some test shots first, to make sure you obtain the desired
results.
59
Still Images
Still Images
Movies
Shooting with a Soft Focus Effect
This function allows you to shoot images as if a soft focus filter were
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
attached to the camera. You can adjust the effect level as desired.
1 Choose [ ].
1 Choose [ ].
zzFollow steps 1 – 2 in “Image Effects
zzFollow steps 1 – 2 in “Image Effects
[
].
[
].
2 Choose a color tone.
2 Choose an effect level.
zzPress the <l> button, choose an
effect level (either press the <q><r>
buttons or turn the <5> dial), and then
press the <l> button again.
zzPress the <l> button, choose a color
tone (either press the <q><r> buttons or
turn the <5> dial), and then press the
<l> button again.
zzA preview is shown of how your shot will
look with the effect applied.
zzA preview is shown of how your shot will
look with the effect applied.
3 Shoot.
Black and white shots.
3 Shoot.
B/W
Sepia
Blue
Sepia tone shots.
• Try taking some test shots first, to make sure you obtain the desired
results.
Blue and white shots.
60
Still Images
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
Auto Shooting after Face Detection
(Smart Shutter)
• To change the number of shots, press the <o><p> buttons after choosing
[
Auto Shooting after Smile Detection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
• Automatic shooting is not available while you are holding down the <
>
button.
1 Choose [ ].
zzFollow steps 1 – 2 in “Specific Scenes”
press the <l> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <l> button.
zzThe camera now enters shooting standby
mode, and [Smile Detection on] is
displayed.
2 Aim the camera at a person.
zzEach time the camera detects a smile,
it will shoot after the lamp lights up.
zzTo pause smile detection, press the <p>
button. Press the <p> button again to
resume detection.
• Switch to another mode when you finish shooting, or the camera will
continue shooting each time a smile is detected.
61
Still Images
4 Face the camera and wink.
zzThe camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
zzTo cancel shooting after you have
triggered the self-timer, press the
<n> button.
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1 Choose [ ].
zzFollow steps 1 – 2 in “Specific Scenes”
press the <l> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <l> button.
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
2 Compose the shot and press
the shutter button halfway.
zzMake sure a green frame is displayed
around the face of the person who will
wink.
• If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
• The zoom factor cannot be changed with the < > button after you press the
shutter button all the way down.
3 Press the shutter button all the
way down.
zzThe camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
zzThe lamp blinks and the self-timer sound
is played.
62
Still Images
4 Join the subjects in the
shooting area and look at the
camera.
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
shots.
zzAfter the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
1 Choose [ ].
zzTo cancel shooting after you have
triggered the self-timer, press the
<n> button.
zzFollow steps 1 – 2 in “Specific Scenes”
press the <l> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <l> button.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
2 Compose the shot and press
the shutter button halfway.
zzMake sure a green frame is displayed
around the face you focus on and white
frames around other faces.
• The zoom factor cannot be changed with the < > button after you press the
shutter button all the way down.
3 Press the shutter button all the
way down.
zzThe camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
zzThe lamp blinks and the self-timer sound
is played.
63
Still Images
• HQ: High Quality
• Focus, image brightness, and color are determined by the first shot.
• The screen is blank while you are shooting.
• There may be a delay after continuous shooting before you can shoot again.
Note that some types of memory cards may delay your next shot even longer.
SD Speed Class 6 or higher memory cards are recommended.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
High-Speed Continuous Shooting
(High-Speed Burst HQ)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
1 Choose [ ].
zzFollow steps 1 – 2 in “Specific Scenes”
2 Shoot.
zzHold the shutter button all the way down
to shoot continuously.
zzShooting stops when you release the
shutter button or reach the maximum
number of shots, after which [Busy] is
displayed and the shots are shown in the
order you took them.
zzEach set of images shot continuously is
managed as a single group, and only the
first image in that group will be displayed
• The drive mode is [W] in
changed.
64
Movies
Movies
Movies
Shooting Various Movies
Locking or Changing Image Brightness before Shooting
Before shooting, you can lock the exposure or change it in 1/3-stop
increments within a range of –2 to +2.
Shooting Movies in [E] Mode
1 Lock the exposure.
zzPress the <o> button to lock the
exposure. The exposure shift bar is
displayed.
1 Enter [E] mode.
zzSet the mode dial to [E].
zzBlack bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
zzTo unlock the exposure, press the <o>
button again.
2 Adjust the exposure.
zzTurn the <5> dial to adjust the
exposure, as you watch the screen.
2 Configure the settings to suit
3 Shoot.
zzPress the movie button.
zzTo stop movie recording, press the movie
button again.
65
Movies
Movies
Shooting iFrame Movies
Shoot movies that can be edited with iFrame-compatible software or
devices. You can quickly edit, save, and manage your iFrame movies using
Shooting Super Slow Motion Movies
You can shoot fast-moving subjects for playback later in slow motion.
Note that sound is not recorded.
1 Choose [ ].
zzSet the mode dial to [E].
zzPress the <m> button, choose [E]
1 Choose [ ].
zzSet the mode dial to <E>.
zzPress the <m> button, choose [E]
in the menu, and then choose [
]
in the menu, and then choose [
]
2 Choose a frame rate.
zzBlack bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
zzPress the <m> button, choose [
]
in the menu, and choose the desired
zzThe option you configured is now
displayed.
• The resolution is [
• iFrame is a video format developed by Apple Inc.
zzA bar showing the elapsed time is
displayed. Maximum clip length is approx.
30 sec.
66
Playback Time
(For a 30-sec. Clip)
Frame Rate
Image Quality
240 fps
120 fps
(320 x 240)
(640 x 480)
Approx. 4 min.
Approx. 2 min.
• Zooming is not available during recording, even if you move the
zoom lever.
• Focus, exposure, and color are determined when you press the
movie button.
• You can change the playback speed of movies by using the software
67
P Mode
More discerning shots, in your preferred shooting style
•
Instructions in this chapter apply to the camera with the mode dial set to
[G] mode.
[G]: Program AE; AE: Auto Exposure
Before using a function introduced in this chapter in modes other than [G],
•
•
Shooting in Program AE ([P] Mode) ............... 69 Shooting Range and Focusing ....................... 74 Other Settings .................................................. 82
Shooting Close-Ups (Macro).................................74
Shooting in Manual Focus Mode...........................74
Digital Tele-Converter............................................75
Changing the AF Frame Mode..............................76
Changing the Focus Setting..................................78
Shooting with the AF Lock.....................................79
Shooting Continuously as the Camera Keeps
the Subject in Focus..............................................79
Flash.................................................................. 80
Changing the Flash Mode.....................................80
Adjusting the Flash Exposure Compensation .......81
Shooting with the FE Lock ....................................81
Changing the Compression Ratio
(Image Quality)......................................................82
Changing the IS Mode Settings ............................82
Image Brightness (Exposure) ......................... 69
Adjusting Image Brightness
(Exposure Compensation) ....................................69
Locking Image Brightness /
Exposure (AE Lock) ..............................................70
Changing the Metering Method.............................70
Changing the ISO Speed ......................................71
Correcting Image Brightness (i-Contrast)..............71
Image Colors .................................................... 72
Adjusting White Balance .......................................72
Changing Image Color Tones (My Colors)............73
68
Still Images
Movies
Image Brightness (Exposure)
Shooting in Program AE ([P] Mode)
You can customize many function settings to suit your preferred shooting
style.
Still Images
Adjusting Image Brightness
(Exposure Compensation)
Movies
1 Enter [G] mode.
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
zzSet the mode dial to [G].
2 Customize the settings as
then shoot.
zzPress the <o> button. As you watch
the screen, turn the <5> dial to adjust
brightness, and then press the <o>
button again when finished.
• If adequate exposure cannot be obtained when you press the shutter button
halfway, shutter speeds and aperture values are displayed in orange. In this
• Movies can be recorded in [G] mode as well, by pressing the movie button.
automatically adjusted for movie recording.
zzThe correction level you specified is now
displayed.
69
Still Images
Still Images
Locking Image Brightness / Exposure
(AE Lock)
Before shooting, you can lock the exposure, or you can specify focus and
exposure separately.
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
zzThe option you configured is now
displayed.
1 Lock the exposure.
zzAim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
zz[ ] is displayed, and the exposure is
locked.
For typical shooting conditions, including backlit shots.
Evaluative
Automatically adjusts exposure to match the shooting conditions.
zzTo unlock AE, release the shutter button
and press the <o> button again. In this
case, [ ] is no longer displayed.
Determines the average brightness of light across the entire
image area, calculated by treating brightness in the central area
as more important.
Center
Weighted Avg.
2 Compose the shot and shoot.
zzAfter one shot, AE is unlocked and [ ] is
no longer displayed.
Metering restricted to within the [ ] (Spot AE Point frame),
Spot
displayed in the center of the screen.
• AE: Auto Exposure
• After the exposure is locked, you can adjust the combination of shutter speed
and aperture value by turning the <5> dial (Program Shift).
70
Still Images
Still Images
Changing the ISO Speed
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insufficient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
zzThe option you configured is now
displayed.
zzPress the <n> button, choose
[i-Contrast] on the [4] tab, and then
zzOnce the setting is complete, [@] is
displayed.
Automatically adjusts the ISO speed to suit the shooting mode and
conditions.
AUTO
100, 200
400, 800
Low For shooting outdoors in fair weather.
For shooting in cloudy conditions, or at twilight.
For shooting night scenes, or in dark rooms.
High
1600, 3200
• Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
• To view the automatically determined ISO speed when you have set the ISO
speed to [AUTO], press the shutter button halfway.
• Although choosing a lower ISO speed may reduce image graininess,
there may be a greater risk of subject and camera shake in some shooting
conditions.
• Choosing a higher ISO speed will increase shutter speed, which may reduce
subject and camera shake and increase the flash range. However, shots may
look grainy.
71
Still Images
Movies
Image Colors
Custom White Balance
Still Images
Movies
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
zzAim the camera at a plain white subject,
so that the entire screen is white.
Press the <l> button.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
zzThe option you configured is now
displayed.
zzThe tint of the screen changes once the
white balance data has been recorded.
• Colors may look unnatural if you change camera settings after
recording white balance data.
Automatically sets the optimal white balance for the shooting
conditions.
Auto
Day Light
Cloudy
For shooting outdoors in fair weather.
For shooting in cloudy conditions, in the shade, or at twilight.
For shooting under ordinary incandescent (tungsten) lighting
and similarly colored fluorescent lighting.
Tungsten
For shooting under warm-white (or similarly colored) or cool-
white fluorescent lighting.
Fluorescent
For shooting under daylight fluorescent and similarly colored
fluorescent lighting.
Fluorescent H
Custom
72
Still Images
Movies
Adjust contrast, sharpness, color saturation, and other
Custom Color
Changing Image Color Tones (My Colors)
• With [ ] and [ ] modes, colors other than people’s skin tone may
change. These settings may not produce the expected results with
some skin tones.
Change image color tones as desired, such as converting images to sepia
or black and white.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
Still Images
Movies
zzThe option you configured is now
displayed.
Custom Color
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
1 Access the setting screen.
choose [ ], and then press the <l>
button.
–
My Colors Off
Vivid
Emphasizes contrast and color saturation, making images
sharper.
Neutral
Sepia
B/W
Tones down contrast and color saturation for subdued images.
Creates sepia tone images.
2 Configure the setting.
zzPress the <o><p> buttons to choose
an option, and then specify the value by
pressing the <q><r> buttons or turning
the <5> dial.
zzFor stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to
the left.
Creates black and white images.
Combines the effects of Vivid Blue, Vivid Green, and Vivid
Red to produce intense yet natural-looking colors resembling
images on positive film.
Positive Film
Lighter Skin Tone Lightens skin tones.
Darker Skin Tone Darkens skin tones.
Emphasizes blues in images. Makes the sky, ocean, and other
Vivid Blue
blue subjects more vivid.
Emphasizes greens in images. Makes mountains, foliage, and
other green subjects more vivid.
Vivid Green
Vivid Red
zzPress the <l> button to complete the
setting.
Emphasizes reds in images. Makes red subjects more vivid.
73
Still Images
Movies
Shooting Range and Focusing
Shooting in Manual Focus Mode
Still Images
When focusing is not possible in AF mode, use manual focus. You can
specify the general focal position and then press the shutter button halfway
to have the camera determine the optimal focal position near the position
Shooting Close-Ups (Macro)
To restrict the focus to subjects at close range, set the camera to [e].
zzPress the <q> button, choose [e] (either
press the <q><r> buttons or turn the
<5> dial), and then press the <m>
button.
1 Choose [f].
zzPress the <q> button, choose [f]
(either press the <q><r> buttons or turn
the <5> dial), and then press the <m>
button.
zzOnce the setting is complete, [e] is
displayed.
zz[f] and the MF indicator are displayed.
• If the flash fires, vignetting may occur.
• In the yellow bar display area below the zoom bar, [e] will turn gray
and the camera will not focus.
2 Specify the general focal
position.
zzReferring to the on-screen MF indicator
bar (which shows the distance and focal
position) and the magnified display area,
press the <o><p> buttons or turn the
<5> dial to specify the general focal
• To prevent camera shake, try mounting the camera on a tripod and shooting
MF Indicator
position, and then press the <m> button.
zzTo adjust the magnification, press the
<r> button.
3 Fine-tune the focus.
zzPress the shutter button halfway to have
the camera fine-tune the focal position
(Safety MF).
74
Still Images
Movies
be changed.
but the magnified display will not appear.
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.6x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it
would be if you zoomed (including using digital zoom) in to the same zoom
factor.
• To focus more accurately, try attaching the camera to a tripod to stabilize it.
[MF-Point Zoom] > [Off].
• To deactivate automatic focus fine-tuning when the shutter button is pressed
zzPress the <n> button, choose
[Digital Zoom] on the [4] tab, and then
zzThe view is enlarged and the zoom factor
is displayed on the screen.
Still Images
Easily Identifying the Focus Area (MF Peaking)
Edges of subjects in focus are displayed in color to make manual focusing
easier. You can adjust the colors and the sensitivity (level) of edge detection
as needed.
• The digital tele-converter cannot be used with digital zoom
• The shutter speed may be equivalent when you move the zoom lever all the
way toward <i> for maximum telephoto, and when you zoom in to enlarge
the subject to the same size following step 2 in “Zooming In Closer on Subjects
1 Access the setting screen.
zzPress the <n> button, choose
[MF Peaking Settings] on the [4] tab,
2 Configure the setting.
zzChoose a menu item to configure, and
• Colors displayed for MF peaking are not recorded in your shots.
75
Still Images
Movies
Still Images
Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
Face AiAF
•
•
Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
zzPress the <n> button, choose
[AF Frame] on the [4] tab, and then
•
•
When the camera detects movement, frames will follow moving subjects,
within a certain range.
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
Still Images
Movies
• If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
AF frame is displayed in the center of the screen when you press
the shutter button halfway.
• Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in profile, at an angle, or partly hidden
Center
One AF frame is displayed in the center. Effective for reliable focusing.
• A yellow AF frame is displayed with [ ] if the camera cannot focus
when you press the shutter button halfway.
• To reduce the AF frame size, press the <n> button and set [AF Frame
• To compose shots so that subjects are positioned at the edge or in a corner,
first aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down (Focus Lock).
• The camera may misinterpret non-human subjects as faces.
• No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
• The AF frame position is enlarged when you press the shutter button halfway
76
Still Images
3 Shoot.
zzPress the shutter button halfway. [
]
Choosing Subjects to Focus On (Tracking AF)
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
zzPress the shutter button all the way down
to shoot.
Shoot after choosing a subject to focus on as follows.
1 Choose [Tracking AF].
[Tracking AF].
zzEven after your shot, [ ] is still
displayed and the camera continues to
track the subject.
zz[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
zzAim the camera so that [ ] is on the
desired subject, and then press the <q>
button.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [AF-Point Zoom] on the [4] tab is not available.
• [e] is not available.
• The camera can detect subjects even if you press the shutter button halfway
without pressing the <q> button. After your shot, [ ] is displayed in the
center of the screen.
least one second.
• If [Face ID] is set to [On], names will not display when registered people
However, a name will display if the subject chosen to focus on is the same as
a person detected with Face ID.
zzWhen the subject is detected, the camera
beeps and [ ] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
zzIf no subject is detected, [ ] is
displayed.
zzTo cancel tracking, press the <q> button
again.
77
Still Images
Still Images
Changing the Focus Setting
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the shutter
button halfway.
1 Configure the setting.
zzPress the <n> button, choose
[Servo AF] on the [4] tab, and then
zzPress the <n> button, choose
[Continuous AF] on the [4] tab, and then
2 Focus.
zzThe focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
Helps avoid missing sudden photo opportunities, because the camera
constantly focuses on subjects until you press the shutter button halfway.
On
Off
Conserves battery power, because the camera does not focus constantly.
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
• AF lock shooting is not available.
78
Still Images
Movies
Still Images
Shooting Continuously as the Camera Keeps
the Subject in Focus
Shooting with the AF Lock
The focus can be locked. After you lock the focus, the focal position will not
change even when you release your finger from the shutter button.
Shoot continuously as the camera keeps the subject in focus. For details
1 Lock the focus.
zzWith the shutter button pressed halfway,
press the <q> button.
1 Configure the setting.
zzThe focus is now locked, and [f] and
the MF indicator are displayed.
zzPress the <m> button, choose
[
] in the menu, and then choose [
]
zzTo unlock the focus, after you release
the shutter button, press the <q> button
again and choose [ ] (either press the
<q><r> buttons or turn the <5> dial).
zzOnce the setting is complete, [ ] is
displayed.
2 Shoot.
2 Compose the shot and shoot.
zzHold the shutter button all the way down
to shoot continuously.
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
• [ ] is not available in
79
Flash
• In [Z] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
• In [Z] mode, even after the flash fires, ensure that the main subject
does not move until the shutter sound is finished playing.
Still Images
Changing the Flash Mode
You can change the flash mode to match the shooting scene. For details on
[!] Off
1 Raise the flash.
For shooting without the flash.
zzMove the <h> switch.
• If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
2 Configure the setting.
zzPress the <r> button, choose a flash
mode (either press the <q><r> buttons
or turn the <5> dial), and then press the
<m> button.
zzThe option you configured is now
displayed.
• The setting screen cannot be accessed by pressing the <r> button
when the flash is lowered. Move the <h> switch to raise the flash,
then configure the setting.
[
] Auto
Fires automatically in low-light conditions.
[h] On
Fires for each shot.
[Z] Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
80
Still Images
Still Images
Adjusting the Flash Exposure Compensation
flash exposure from –2 to +2 stops, in 1/3-stop increments.
Shooting with the FE Lock
shots.
1 Raise the flash and set it to [h]
zzPress the <m> button, choose [X] in
the menu, and adjust the setting by either
pressing the <o><p> buttons or turning
zzThe correction level you specified is now
displayed.
2 Lock the flash exposure.
zzAim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
zzThe flash fires, and when
• When there is a risk of overexposure, the camera automatically adjusts the
shutter speed or aperture value during the flash shots to reduce washed-
out highlights and shoot at optimal exposure. However, you can deactivate
automatic adjustment of the shutter speed and aperture value by accessing
• You can also configure the flash exposure compensation by accessing MENU
flash is up by pressing the <r> button and immediately pressing the <n>
button.
[
] is displayed, the flash output level is
retained.
zzTo unlock FE, release the shutter button
and press the <o> button again. In this
case, [ ] is no longer displayed.
3 Compose the shot and shoot.
zzAfter one shot, FE is unlocked and [ ] is
no longer displayed.
• FE: Flash Exposure
81
Still Images
Movies
Other Settings
Changing the IS Mode Settings
Still Images
1 Access the setting screen.
zzPress the <n> button, choose
[IS Settings] on the [4] tab, and then
Changing the Compression Ratio
(Image Quality)
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as
follows. For guidelines on how many shots at each compression ratio can fit
2 Configure the setting.
zzChoose [IS Mode], and then choose the
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
Optimal image stabilization for the shooting conditions is automatically
Shoot Only* Image stabilization is active only at the moment of shooting.
Continuous
Off Deactivates image stabilization.
* The setting is changed to [Continuous] for movie recording.
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
82
Movies
Shooting Movies with Subjects at the Same Size Shown
before Shooting
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
shake. To shoot subjects at the same size shown before shooting, you can
choose not to reduce significant camera shake.
[IS Settings] screen.
zzChoose [Dynamic IS], and then choose
• You can also set [IS Mode] to [Off], so that subjects are recorded at
the same size shown before shooting.
83
Tv, Av, and M Mode
Take smarter, more sophisticated shots
•
Instructions in this chapter apply to the camera as set to the respective mode.
Specific Shutter Speeds ([Tv] Mode).............. 85
Specific Aperture Values ([Av] Mode) ............ 85
Specific Shutter Speeds and Aperture Values
([M] Mode)........................................................ 86
Adjusting the Flash Output....................................87
84
Still Images
Still Images
Specific Shutter Speeds ([Tv] Mode)
Set your preferred shutter speed before shooting as follows. The camera
automatically adjusts the aperture value to suit your shutter speed.
Specific Aperture Values ([Av] Mode)
Set your preferred aperture value before shooting as follows. The camera
automatically adjusts the shutter speed to suit your aperture value.
1 Enter [M] mode.
1 Enter [B] mode.
zzSet the mode dial to [M].
zzSet the mode dial to [B].
2 Set the shutter speed.
zzTurn the <5> dial to set the shutter
speed.
2 Set the aperture value.
zzTurn the <5> dial to set the aperture
value.
• In shooting conditions requiring slower shutter speeds, there will
be a delay before you can shoot again, as the camera processes
images to reduce noise.
• When shooting at low shutter speeds on a tripod, you should set
• Maximum shutter speed with the flash is 1/2000 second. If you
specify a faster speed, the camera will automatically reset the speed
to 1/2000 second before shooting.
• Orange display of aperture values when you press the shutter
button halfway indicates that the settings deviate from standard
exposure. Adjust the shutter speed until the aperture value is
• Orange display of shutter speeds when you press the shutter button
halfway indicates that the settings deviate from standard exposure.
Adjust the aperture value until the shutter speed is displayed in
white, or use safety shift (see below).
• [B]: Aperture value (size of the opening made by the iris in the lens)
• To avoid exposure problems in [M] and [B] modes, you can have the
camera automatically adjust the shutter speed or aperture value, even when
standard exposure cannot otherwise be obtained. Press the <n> button
However, safety shift is disabled when the flash fires.
• [M]: Time value
85
Still Images
Specific Shutter Speeds and Aperture
Values ([M] Mode)
• After you set the shutter speed or aperture value, the exposure level
may change if you adjust the zoom or recompose the shot.
• Screen brightness may change depending on your specified shutter
speed or aperture value. However, screen brightness remains the
same when the flash is up and the mode is set to [h].
• To have the setting you did not configure in step 2 (whether shutter
speed or aperture value) automatically adjusted to obtain standard
exposure, hold the shutter button halfway and press the <o>
button. Note that standard exposure may not be possible with some
settings.
Follow these steps before shooting to set your preferred shutter speed and
aperture value to obtain the desired exposure.
1 Enter [D] mode.
zzSet the mode dial to [D].
• With shutter speeds of 1.3 seconds or slower, ISO speed is [100]
and cannot be changed.
2 Configure the setting.
zzPress the <o> button, choose
adjustment of shutter speed or aperture
value, and turn the <5> dial to specify
a value.
• [D]: Manual
• Calculation of standard exposure is based on the specified metering method
zzAn exposure level mark based on your
specified value is shown on the exposure
level indicator for comparison to the
Aperture Value
standard exposure level.
Shutter Speed
zzThe exposure level mark is shown in
orange when the difference from standard
exposure exceeds 2 stops.
Exposure
Standard
Exposure Level
Level Indicator
Exposure Level
Mark
86
Still Images
Adjusting the Flash Output
Choose from the three flash levels in [D] mode.
1 Enter [D] mode.
zzSet the mode dial to [D].
2 Configure the setting.
zzPress the <m> button, choose [X] in
the menu, and adjust the setting by either
pressing the <o><p> buttons or turning
5
zzOnce the setting is complete, the flash
output level is displayed.
[
]: low, [
]: medium, [
]: high
[4] tab > [Flash Settings] > [Flash Output].
• You can set the flash level in [M] or [B] mode by accessing MENU
• You can also access the [Flash Settings] MENU screen when the flash is up by
pressing the <r> button and immediately pressing the <n> button.
87
Playback Mode
Have fun reviewing your shots, and browse or edit them in many ways
•
To prepare the camera for these operations, press the <1> button to enter Playback mode.
• It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras.
Viewing.............................................................. 89 Protecting Images............................................ 98 Editing Still Images........................................ 106
Switching Display Modes ......................................90
Viewing Short Movies Created When Shooting
Still Images (Digest Movies)..................................91
Checking People Detected in Face ID ..................92
Using the Menu.....................................................99
Choosing Images Individually ...............................99
Selecting a Range...............................................100
Specifying All Images at Once ............................101
Resizing Images..................................................106
Cropping..............................................................107
Changing Image Color Tones (My Colors)..........108
Correcting Image Brightness (i-Contrast)............109
Correcting Red-Eye.............................................109
Browsing and Filtering Images....................... 93 Erasing Images............................................... 101
Editing Movies................................................ 110
Reducing File Sizes ............................................ 112
Editing Digest Movies.......................................... 112
Navigating through Images in an Index.................93
Finding Images Matching Specified Conditions ....93
Viewing Individual Images in a Group...................94
Erasing Multiple Images at Once ........................102
Rotating Images ............................................. 104
Using the Menu...................................................104
Deactivating Auto Rotation..................................105
Editing Face ID Information ............................ 95
Image Viewing Options.................................... 96 Tagging Images as Favorites........................ 105
Magnifying Images................................................96
Viewing Slideshows ..............................................96
Auto Playback of Related Images
(Smart Shuffle)......................................................97
88
Still Images
Movies
zzMovies are identified by a [
] icon.
Viewing
To play movies, go to step 3.
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
zzPress the <1> button.
zzYour last shot is displayed.
3 Play movies.
zzTo start playback, press the <m> button,
choose [ ] (either press the <o><p>
buttons or turn the <5> dial), and then
press the <m> button again.
2 Browse through your images.
zzTo view the previous image, press
the <q> button or turn the <5> dial
counterclockwise. To view the next
image, press the <r> button or turn the
<5> dial clockwise.
4 Adjust the volume.
zzPress the <o><p> buttons to adjust the
volume.
zzPress and hold the <q><r> buttons to
browse through images quickly.
zzTo adjust the volume when the volume
indicator is no longer displayed, press the
<o><p> buttons.
Volume Indicator
zzTo access Scroll Display mode, turn the
5 Pause playback.
zzTo pause or resume playback, press the
<m> button.
5
5
<
<
> dial rapidly. In this mode, turn the
> dial to browse through images.
zzTo return to single-image display, press
m
zzAfter the movie is finished, [
displayed.
] is
the < > button.
zzTo browse images grouped by shooting
date, press the <o><p> buttons in
Scroll Display mode.
89
Still Images
Movies
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
Display] > [Off].
• To have the most recent shot displayed when you enter Playback mode,
choose your desired effect in [1] tab > [Transition Effect].
Overexposure Warning (for Image Highlights)
Washed-out highlights in the image flash on the screen in detailed
Still Images
Movies
Histogram
High
Low
zzThe graph in detailed information display
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
Still Images
Movies
Switching Display Modes
Press the <l> button to view other information on the screen, or to hide
Dark
Bright
No Information
Display
Simple
Information
Display
Detailed
Information
Display
GPS Information
Display
90
Still Images
Movies
Movies
Viewing Short Movies Created When
Shooting Still Images (Digest Movies)
of still image shooting as follows.
GPS Information Display
zzUsing a smartphone connected to the
camera via Wi-Fi, you can geotag images
on the camera, adding information such
as latitude, longitude, and elevation
in the GPS information display.
1 Choose an image.
zzStill images shot in [ ] mode are labeled
zzLatitude, longitude, elevation, and UTC
(shooting date and time) are listed from
top to bottom.
with an [
] icon.
GPS Display
• GPS information display is not available for images that lack this
information.
• [---] is shown instead of numerical values for items not available on
your smartphone or items not recorded correctly.
2 Play the movie.
zzPress the <m> button, and then choose
[
• UTC: Coordinated Universal Time, essentially the same as Greenwich Mean
zzThe movie recorded automatically on the
day of still image shooting is played back,
from the beginning.
Time
• After a moment, [
] will no longer be displayed when you are using the
91
Still Images
Viewing by Date
Checking People Detected in Face ID
displayed.
Digest movies can be viewed by date.
1 Choose a movie.
zzPress the <n> button, choose
[List/Play Digest Movies] on the [1] tab,
zzPress the <l> button several
times until simple information display is
activated, and then press the <q><r>
buttons to choose an image.
2 Play the movie.
zzPress the <m> button to start playback.
zzNames will be displayed on detected
people.
• If you prefer not to have names displayed on images shot using Face ID,
92
Still Images
Movies
Browsing and Filtering Images
Finding Images Matching Specified Conditions
Find desired images quickly on a memory card full of images by filtering
image display according to your specified conditions. You can also protect
Still Images
Movies
Navigating through Images in an Index
By displaying multiple images in an index, you can quickly find the images
you are looking for.
Name
Displays images with detected faces.
People
1 Display images in an index.
zzMove the zoom lever toward <g> to
display images in an index. Moving the
lever again will increase the number of
images shown.
Shot Date
Favorites
Displays the images shot on a specific date.
Displays only still images or movies.
Displays still images, movies, or movies shot in
Still image/Movie
[
zzTo display fewer images, move the zoom
lever toward <k>. Fewer images are
shown each time you move the lever.
1 Choose a search condition.
zzPress the <m> button, choose [ ] in the
zzWhen you have selected [ ], [ ], or
2 Choose an image.
zzTurn the <5> dial to scroll through the
images.
[
], choose the condition by pressing
the <o><p><q><r> buttons on the
screen displayed, and then press the
<m> button.
zzPress the <o><p><q><r> buttons to
choose an image.
zzAn orange frame is displayed around the
selected image.
2 View the filtered images.
zzImages matching your conditions are
displayed in yellow frames. To view only
these images, press the <q><r> buttons.
zzTo cancel filtered display, choose [ ] in
step 1.
zzPress the <m> button to view the
selected image in single-image display.
• To deactivate the 3D display effect (shown if you hold down the <o><p>
[Index Effect] > [Off].
• When the camera has found no corresponding images for some
conditions, those conditions will not be available.
93
3 View images in the group
individually.
zzPressing the <q><r> buttons or turning
the <5> dial will display only images in
the group.
• To show or hide information, press the <l> button in step 2.
them to a photobook by choosing [Select All Images in Search] in “Protecting
zzTo cancel group playback, press the
<m> button, choose [ ] in the menu,
and press the <m> button again
is displayed, and the images that were found are no longer shown.
• During group playback (step 3), you can browse through images quickly
• To ungroup images so that they are displayed only as single still images,
However, grouped images cannot be ungrouped during individual playback.
Still Images
Viewing Individual Images in a Group
for display, and these grouped images can be viewed one at a time.
1 Choose a grouped image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image labeled
• Simultaneous display in [
immediately after you shoot.
with [
].
2 Choose [ ].
zzPress the <m> button, and then choose
[
94
Editing Face ID Information
3 Choose the editing option.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose [Overwrite],
and then press the <m> button.
If you notice that a name is incorrect during playback, you can change it or
erase it.
However, you cannot add names for people who are not detected by Face
ID (names are not displayed), and for people whose names have been
erased.
4 Choose the name of the person
to overwrite with.
zzFollow step 2 in “Overwriting and Adding
the name of the person you want to
overwrite with.
Changing Names
1 Access the setting screen.
zzPress the <n> button and choose
zzPress the <o><p> buttons or turn the
<5> dial to choose [Edit ID Info], and
then press the <m> button.
Erasing Names
zzFollowing step 3 in “Changing Names”
<m> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [OK], and then press the <m>
button.
2 Choose an image.
choose an image and press the <
button.
>
m
zzAn orange frame is displayed around the
selected face. When multiple names are
displayed in an image, press the <q><r>
buttons or turn the <5> dial to choose
the name to change, and then press the
<m> button.
95
Still Images
Movies
Image Viewing Options
Viewing Slideshows
Still Images
Automatically play back images from a memory card as follows. Each image
is displayed for about three seconds.
Magnifying Images
1 Magnify an image.
zzPress the <m> button, choose [.] in
the menu, and choose the desired option
zzThe slideshow will start after [Loading
image] is displayed for a few seconds.
zzPress the <n> button to stop the
slideshow.
zzMoving the zoom lever toward <k> will
zoom in and magnify the image. You can
magnify images up to about 10x by
continuing to hold the zoom lever.
zzTo zoom out, move the zoom lever
toward <g>. You can return to single-
image display by continuing to hold it.
2 Move the display position and
switch images as needed.
zzTo move the display position, press the
<o><p><q><r> buttons.
zzTo switch to other images while zoomed,
turn the <5> dial.
during slideshows.
• To pause or resume slideshows, press the <m> button.
• You can switch to other images during playback by pressing the <q><r>
buttons or turning the <5> dial. For fast-forward or fast-rewind, hold the
<q><r> buttons down.
played.
Approximate Position of
Displayed Area
• You can return to single-image display from magnified display by pressing the
<n> button.
96
Still Images
Changing Slideshow Settings
Auto Playback of Related Images
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
(Smart Shuffle)
Based on the current image, the camera offers four images that you may
wish to view. After you choose to view one of those images, the camera
offers four more images. This is an enjoyable way to play back images in
an unexpected order. Try this feature after you have taken many shots, in
many kinds of scenes.
1 Access the setting screen.
zzPress the <n> button, and then
choose [Slideshow] on the [1] tab
2 Configure the settings.
zzChoose a menu item to configure, and
zzTo start the slideshow with your settings,
choose [Start] and press the <m>
button.
1 Choose Smart Shuffle.
zzPress the <m> button, and then choose
[
zzFour candidate images are displayed.
zzTo return to the menu screen, press the
<n> button.
2 Choose an image.
• [Play Time] cannot be modified when [Bubble] is chosen in [Effect].
zzPress the <o><p><q><r> buttons to
choose the image you want to view next.
zzYour chosen image is displayed in the
center, surrounded by the next four
candidate images.
zzFor full-screen display of the center
image, press the <m> button. To restore
the original display, press the <m>
button again.
zzPress the <n> button to restore
single-image display.
97
Still Images
Movies
• Only still images shot with this camera are played back using
Smart Shuffle.
Protecting Images
• Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
Protect important images to prevent accidental erasure by the camera
zzPress the <m> button, and then choose
is displayed.
zzTo cancel protection, repeat this process
and choose [:] again, and then press
the <m> button.
• Protected images on a memory card will be erased if you format the
• Protected images cannot be erased using the camera’s erasure function.
To erase them this way, first cancel protection.
98
Using the Menu
Choosing Images Individually
1 Choose [Select].
1 Access the setting screen.
zzPress the <n> button and choose
zzFollowing step 2 in “Using the Menu”
<m> button.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button. [ ] is displayed.
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to specify other
images.
2 Choose a selection method.
zzChoose a menu item and an option as
zzTo return to the menu screen, press the
<n> button.
3 Protect the image.
zzPress the <n> button. A confirmation
message is displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
99
Selecting a Range
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
zzImages before the first image cannot be
selected as the last image.
1 Choose [Select Range].
zzFollowing step 2 in “Using the Menu”
press the <m> button.
2 Choose a starting image.
zzPress the <m> button.
4 Protect the images.
zzPress the <p> button to choose
[Protect], and then press the <m>
button.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
• You can also choose the first or last image by turning the <5> dial when the
top screen in steps 2 and 3 is displayed.
3 Choose an ending image.
zzPress the <r> button to choose [Last
image], and then press the <m> button.
100
Still Images
Movies
Specifying All Images at Once
Erasing Images
1 Choose [Select All Images].
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered. However, protected
zzFollowing step 2 in “Using the Menu”
press the <m> button.
2 Protect the images.
1 Choose an image to erase.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Protect], and then
press the <m> button.
2 Erase the image.
zzPress the <p> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [Erase], and then press the <m>
button.
• To cancel protection for groups of images, choose [Unlock] in step 4 of
“Selecting a Range” or in step 2 of “Specifying All Images at Once”.
zzThe current image is now erased.
zzTo cancel erasure, press the <q><r>
buttons or turn the <5> dial to choose
[Cancel], and then press the <m>
button.
101
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when erasing
images, because they cannot be recovered. However, protected images
Choosing Images Individually
1 Choose [Select].
zzFollowing step 2 in “Choosing a Selection
press the <m> button.
Choosing a Selection Method
2 Choose an image.
1 Access the setting screen.
zzPress the <n> button, and then
zzOnce you choose an image following
step 2 in “Choosing Images Individually”
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to specify other
images.
2 Choose a selection method.
zzPress the <o><p> buttons or turn the
<5> dial to choose a selection method,
and then press the <m> button.
zzTo return to the menu screen, press the
<n> button.
3 Erase the image.
zzPress the <n> button. A confirmation
message is displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
102
Selecting a Range
Specifying All Images at Once
1 Choose [Select Range].
zzFollowing step 2 in “Choosing a Selection
1 Choose [Select All Images].
zzFollowing step 2 in “Choosing a Selection
Images] and press the <m> button.
Range] and press the <m> button.
2 Choose images.
2 Erase the images.
zzFollow steps 2 – 3 in “Selecting a Range”
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
3 Erase the images.
zzPress the <p> button to choose [Erase],
and then press the <m> button.
103
Still Images
Using the Menu
Rotating Images
1 Choose [Rotate].
Change the orientation of images and save them as follows.
zzPress the <n> button and choose
1 Choose [ ].
\
zzPress the < > button, and then choose
m
[
\
2 Rotate the image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
zzThe image is rotated 90° each time you
press the <m> button.
2 Rotate the image.
zzPress the <q> or <r> button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the <m> button to complete
the setting.
zzTo return to the menu screen, press the
<n> button.
104
Still Images
Movies
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates
images based on the current camera orientation.
Tagging Images as Favorites
You can organize images by tagging them as favorites. By choosing a
category in filtered playback, you can restrict the following operations to all
of those images.
zzPress the <n> button, choose
[Auto Rotate] on the [1] tab, and then
•
zzPress the <m> button, and then choose
[
zz[Tagged as Favorite] is displayed.
zzTo untag the image, repeat this process
and choose [ ] again, and then press
the <m> button.
[Off]. Additionally, images already rotated will be displayed in the
original orientation.
[Off], images shot vertically will be displayed vertically, and rotated
images will be displayed in the rotated orientation.
105
Editing Still Images
Using the Menu
1 Choose [Favorites].
card has sufficient free space.
zzPress the <n> button and choose
Still Images
Resizing Images
Save a copy of images at a lower resolution.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button. [ ] is displayed.
zzTo untag the image, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to choose additional
images.
1 Choose [Resize].
zzPress the <n> button and choose
3 Finish the setup process.
zzPress the <n> button. A confirmation
message is displayed.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
3 Choose an image size.
zzPress the <q><r> buttons or turn the
<5> dial to choose the size, and then
press the <m> button.
• Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.
zz[Save new image?] is displayed.
• Favorite images will have a three-star rating (
) when transferred
to computers running Windows 8, Windows 7, or Windows Vista. (Does not
apply to movies.)
106
Still Images
4 Save the new image.
Cropping
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
You can specify a portion of an image to save as a separate image file.
zzThe image is now saved as a new file.
1 Choose [Cropping].
zzPress the <n> button, and then
choose [Cropping] on the [1] tab
5 Review the new image.
zzPress the <n> button. [Display new
image?] is displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [Yes], and then
press the <m> button.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
zzThe saved image is now displayed.
• Editing is not possible for images shot at a resolution of [
]
• Images cannot be resized to a higher resolution.
107
Still Images
Cropping Area
3 Adjust the cropping area.
zzA frame is displayed around the portion of
the image to be cropped.
Changing Image Color Tones (My Colors)
You can adjust image colors and then save the edited image as a separate
zzThe original image is shown in the upper
left, and a preview of the image as
cropped is shown in the lower right.
zzTo resize the frame, move the zoom
lever.
1 Choose [My Colors].
zzPress the <n> button, and then choose
zzTo move the frame, press the
<o><p><q><r> buttons.
zzTo change the frame orientation, press
the <l> button.
Preview of Image After Cropping
Resolution After Cropping
2 Choose an image.
zzFaces detected in the image are
enclosed in gray frames in the upper-left
image. To crop the image based on this
frame, turn the <5> dial to switch to the
other frame.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
3 Choose an option.
zzPress the <m> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose an option, and then
press the <m> button.
4 Save as a new image and
review.
zzFollow steps 4 – 5 in “Resizing Images”
4 Save as a new image and review.
zzFollow steps 4 – 5 in “Resizing Images”
• Editing is not possible for images shot at a resolution of [
]
• Images supported for cropping will have the same aspect ratio after cropping.
• Cropped images will have a lower resolution than uncropped images.
people left in the cropped image will remain.
• Image quality of pictures you repeatedly edit this way will be a little
lower each time, and you may not be able to obtain the desired color.
• The color of images edited using this function may vary slightly from the color
108
Still Images
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
Still Images
1 Choose [i-Contrast].
zzPress the <n> button, and then
choose [i-Contrast] on the [1] tab
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1 Choose [Red-Eye Correction].
zzPress the <n> button, and then
choose [Red-Eye Correction] on the [1]
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
3 Choose an option.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an option, and then
press the <m> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
4 Save as a new image and
review.
zzFollow steps 4 – 5 in “Resizing Images”
109
Movies
3 Correct the image.
zzPress the <m> button.
Editing Movies
zzRed-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
zzEnlarge or reduce images as needed.
You can cut movies to remove unneeded portions at the beginning or end.
1 Choose [*].
zzFollowing steps 1 – 5 in “Viewing”
<m> button.
zzThe movie editing panel and editing bar
are now displayed.
4 Save as a new image and
review.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose [New File],
and then press the <m> button.
zzThe image is now saved as a new file.
zzFollow step 5 in “Resizing Images”
Movie Editing Panel
2 Specify portions to cut.
zzPress the <o><p> buttons to choose
[
] or [ ].
zzTo view the portions you can cut
(identified by [ ] on the screen), press
the <q><r> buttons or turn the <5>
dial to move [ ]. Cut the beginning of the
movie (from [ ]) by choosing [ ], and
cut the end of the movie by choosing
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
Movie Editing Bar
[
].
zzIf you move [ ] to a position other than a
] mark, in [ ] the portion before the
[
nearest [ ] mark on the left will be cut,
while in [ ] the portion after the nearest
[
] mark on the right will be cut.
110
3 Review the edited movie.
• To overwrite the original movie with the cut one, choose [Overwrite]
in step 4. In this case, the original movie will be erased.
• If the memory card lacks sufficient space, only [Overwrite] will be
available.
• Movies may not be saved if the battery pack runs out while saving
is in progress.
zzPress the <o><p> buttons to choose
[
], and then press the <m> button.
The edited movie is now played.
zzTo edit the movie again, repeat step 2.
zzTo cancel editing, press the <o><p>
buttons to choose [ ]. Press the <m>
button, choose [OK] (either press the
<q><r> buttons or turn the <5> dial),
and then press the <m> button again.
• When editing movies, you should use a fully charged battery pack or
4 Save the edited movie.
zzPress the <o><p> buttons to choose
[
], and then press the <m> button.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose [New File],
and then press the <m> button.
zzThe movie is now saved as a new file.
zzChoose [Save w/o Comp.], and then
press the <m> button.
111
Movies
Reducing File Sizes
Movie file sizes can be reduced by compressing movies as follows.
Editing Digest Movies
needed. Be careful when erasing clips, because they cannot be recovered.
zzOn the screen in step 2 of “Editing
Movies”, choose [ ]. Choose [New File],
and then press the <m> button.
zzChoose [Compress & Sav.], and then
press the <m> button.
1 Select the clip to erase.
zzFollow steps 1 – 2 in “Viewing Short
Movies Created When Shooting Still
play a movie created in [ ] mode, and
then press the <m> button to access the
movie control panel.
• Compressed movies are saved in [
• [ ] movies cannot be compressed.
] format.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ] or [ ], and
then press the <m> button.
• Edited movies cannot be saved in compressed format when you choose
[Overwrite].
• However, you can compress and save edited movies as new files by choosing
[Compress & Sav.].
2 Choose [ ].
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <m> button.
zzThe selected clip is played back repeatedly.
3 Confirm erasure.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
zzThe clip is erased, and the short movie is
overwritten.
•
[
] is not displayed if you select a clip when the camera is connected to a printer.
112
Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible devices, and use the camera with Web services
What You Can Do with Wi-Fi ......................... 114 Accessing the Wi-Fi Menu............................. 123 Saving Images to a Computer....................... 136
Uploading Images to Web Services.................... 114
Sending Images to a Smartphone....................... 115
Sending Images to a Computer .......................... 115
Printing Images Wirelessly.................................. 116
Sending Images to Another Camera................... 116
Registering Web Services............................. 116
Registering CANON iMAGE GATEWAY ............. 117
Registering Other Web Services......................... 119
Initial Connection via Wi-Fi..................................123
After the Initial Wi-Fi Connection.........................123
Connecting via an Access Point................... 124
Confirming Access Point Compatibility................124
Connecting to WPS-Compatible Access
Points ..................................................................125
Connecting to Access Points in the List ..............128
Connecting without an Access Point........... 129
Previous Access Points.......................................132
Connecting to Another Camera .................... 132
Using the < > Button................................... 137
Registering a Smartphone to the < > Button ...137
Registering Image Sync to the < > Button.......138
Clearing Registered Destinations........................139
Sending Images Automatically
(Image Sync) ................................................. 139
Initial Preparations ..............................................139
Sending Images ..................................................140
Geotagging Images on the Camera.............. 141
Shooting Remotely ........................................ 141
Editing or Erasing Wi-Fi Settings ................. 142
Installing CameraWindow
on a Smartphone .......................................... 119
Preparing to Register a Computer................ 120
Sending Images.............................................. 133
Checking Your Computer Environment...............120
Installing the Software.........................................121
Configuring the Computer for a Wi-Fi
Sending Images Individually ...............................133
Sending Multiple Images.....................................135
Adding Comments...............................................136
Editing Connection Information...........................142
Returning the Wi-Fi Settings to Default...............144
Connection (Windows Only)................................122
113
Uploading Images to Web Services
What You Can Do with Wi-Fi
This camera is an approved Wi-Fi® product. You can wirelessly connect to
and send images to the following devices and services.
Note that, in this chapter, wireless LAN functions other than Wi-Fi may be
referred to as Wi-Fi.
Images can be sent to social network services and other Web services
via CANON iMAGE GATEWAY*. Unsent images on the camera can also
be sent automatically to a computer or Web service via CANON iMAGE
GATEWAY.
Sending images via Wi-Fi requires some initial preparation on the camera
and target devices. Preparations and methods of sending images vary
depending on the destination.
nickname on the camera.
* CANON iMAGE GATEWAY is an online photo service available to those who have
purchased this product.
Steps in sending images
SNS, video-
CANON iMAGE
sharing sites,
GATEWAY
e-mail
• Wi-Fi is a brand name that indicates interoperability certification of wireless
LAN devices.
Access point
Camera
Computer or smartphone
browsers
* You can send images to a computer or Web service.
114
Sending Images to a Smartphone
Send images to smartphones and tablet computers that have Wi-Fi
functions. You can also shoot remotely and geotag your shots from a
smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other compatible
devices are collectively referred to as “smartphones”.
Sending Images to a Computer
Use the software to wirelessly send images from the camera to a computer.
Steps in sending images
Internet
CameraWindow
Steps in sending images
Access point
App Store/Google Play
CameraWindow
Camera
Computer
Camera
Smartphone
Tablet computer
Access point
115
Printing Images Wirelessly
Send images wirelessly to a PictBridge-compatible printer (supporting DPS
over IP) to print them.
Registering Web Services
Use a smartphone or computer to add to the camera Web services that you
want to use.
•
A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY and
other Web services.
Steps in sending images
•
Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and
version information.
Camera
Printer
Access point
•
•
For information on countries and regions where CANON iMAGE GATEWAY
is available, visit the Canon website (http://www.canon.com/cig/).
You must have an account with Web services other than CANON iMAGE
GATEWAY if you desire to use them. For further details, check the
websites for each Web service you want to register.
•
Separate ISP connection and access point fees may be applicable.
Sending Images to Another Camera
Use the Wi-Fi function to send images between Canon-brand cameras.
Steps in sending images
Camera
Camera
116
Registering CANON iMAGE GATEWAY
After linking the camera and CANON iMAGE GATEWAY, add CANON
iMAGE GATEWAY as a destination Web service on the camera.
3 Access the Wi-Fi menu.
zzOn the camera, access the Wi-Fi menu
4 Choose [ ].
1 Log in to CANON iMAGE
GATEWAY and access the
camera settings page.
zzFrom a computer or smartphone, access
http://www.canon.com/cig/ and visit the
CANON iMAGE GATEWAY site for your
region.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose [
then press the <m> button.
], and
5 Establish a connection with an
access point.
zzPress the <q><r> buttons or turn the
<5> dial to choose [Authenticate], and
then press the <m> button.
zzOnce the login screen is displayed,
enter your user name and password
to log in. If you do not have a CANON
iMAGE GATEWAY account, follow
the instructions to complete member
registration (free of charge).
zzAccess the camera settings page.
6 Choose an access point.
zzPress the <o><p> buttons or turn the
<5> dial to choose a network (access
point), and then press the <m> button.
2 Choose your camera model.
zzOn this camera model, [
] is displayed
in the Wi-Fi menu.
zzOnce you choose the model, a page is
displayed for entering the authentication
code. On this page in step 9, you will
enter the authentication code displayed
on the camera after steps 3 – 8.
117
7 Enter the access point
password.
zzPress the <m> button to access the
keyboard, and then enter the password
zzPress the <o><p> buttons or turn the
<5> dial to choose [Next], and then
press the <m> button.
10 Check the confirmation
numbers and complete the
setup process.
zzMake sure the confirmation number on
the camera matches the number on the
smartphone or computer.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
8 Choose [Auto] and establish the
connection.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Auto], and then
press the <m> button.
zzComplete the setup process on the
smartphone or computer.
GATEWAY are now added as
zzOnce the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
destinations, and the [
to [ ].
] icon changes
zzA message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure in
“Registering Other Web Services” from
9 Enter the authentication code.
zzOn the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
zzA six-digit confirmation number is
displayed.
• You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in “Connecting to WPS-
118
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the
camera. Note that CANON iMAGE GATEWAY must be registered on the
Installing CameraWindow on
a Smartphone
Before connecting your camera to a smartphone, first install the free
dedicated application, CameraWindow, on your smartphone.
1 Access the Web service
settings screen.
to CANON iMAGE GATEWAY, and then
access the Web service settings screen.
1 Connect the smartphone to
a network.
2 Install CameraWindow.
zzFor an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera’s
N-Mark ( ) will start Google Play on the
smartphone. Once the CameraWindow
download page is displayed, download
and install the app.
2 Configure the Web service you
want to use.
zzFollow the instructions displayed on the
smartphone or computer to set up the
Web service.
3 Choose [ ].
[
] (either press the <o><p><q><r>
zzFor other Android smartphones, find
CameraWindow in Google Play and
download and install the app.
buttons or turn the <5> dial), and then
press the <m> button.
zzThe Web service settings are now
updated.
zzFor an iPhone, iPad, or iPod touch, find
CameraWindow in the App Store and
download and install the app.
• If any configured settings change, follow these steps again to update the
camera settings.
zzAfter installation, use the camera
to establish a connection with the
119
Preparing to Register a Computer
Prepare to register a computer. To save images to the computer wirelessly,
you must install CameraWindow.
• When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone. This may damage
the devices.
- Depending on the smartphone, the devices may not recognize each other
immediately. In this case, try holding the devices together in slightly different
positions.
Checking Your Computer Environment
- Do not place other objects between the camera and smartphone. Also,
note that camera or smartphone covers or similar accessories may block
communication.
The camera can connect via Wi-Fi to computers running the following
operating systems. For detailed system requirements and compatibility
information, including support in new operating systems, visit the Canon
website.
• For details on this application (supported smartphones and included functions),
refer to the Canon website.
• Not all NFC-compatible smartphones have an N-Mark ( ). For details, refer
to the smartphone user manual.
Windows
Mac OS
Mac OS X 10.9
Mac OS X 10.8.2 or later
Mac OS X 10.7
Operating
System
Windows 8/8.1
Windows 7 SP1
• Windows 7 Starter and Home Basic editions are not supported.
• Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
120
Installing the Software
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
3 When a message is displayed
prompting you to connect the
camera, choose whether to
connect or not.
When Connecting the Camera to
the Computer
zzWith the camera turned off, open the
cover ( ). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal ( ).
What you will need:
zzComputer
zzUSB cable (camera end: Mini-B)*
* A USB cable is not included. Although you can install the software without using a
cable, some features will not be added.
1 Download the software.
zzWith a computer connected to the Internet,
access http://www.canon.com/icpd/.
zzAccess the site for your country or region.
zzDownload the software.
2 Begin the installation.
zzClick [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
zzInsert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.
zzTurn the camera on, and follow the
on-screen instructions to complete the
installation process.
Without Connecting the Camera
zzSelect [Install without connecting
the device] and follow the on-screen
instructions to complete the installation
process.
121
Configuring the Computer for a Wi-Fi
4 Install the files.
zzInstallation may take some time,
depending on computer performance and
the Internet connection.
Connection (Windows Only)
On a computer running Windows, configure the following settings before
connecting the camera to the computer wirelessly.
zzClick [Finish] or [Restart] on the screen
after installation.
1 Confirm that the computer is
connected to an access point.
zzFor instructions on checking your network
connection, refer to the computer user
manual.
zzAfter installation when the camera is
connected to the computer, turn the
camera off before disconnecting the
cable.
2 Configure the setting.
zzClick in the following order: [Start] menu
► [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [Wi-Fi connection
setup].
• Because the content and functions of software vary according to the camera
model, if you have several cameras, you must use each camera to update to
its latest version of the software.
zzIn the application that opens, follow the
on-screen instructions and configure the
setting.
•
The following Windows settings are configured when you run the utility in step 2.
- Turn on media streaming.
This will enable the camera to see (find) the computer to access via Wi-Fi.
- Turn on network discovery.
This will enable the computer to see (find) the camera.
- Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
- Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
• Some security software may prevent you from completing the settings as
described here. Check the settings of your security software.
122
Accessing the Wi-Fi Menu
• When connecting wirelessly to any device other than a computer, a memory
card must be inserted in the camera. Additionally, the memory card must
contain images before you can access Web services or connect to a printer
wirelessly.
Settings] > [Change Device Nickname].
• If the Wi-Fi menu is not displayed but only the information changes when
you press the <o> button, first press the <p> button to switch from detailed
• A message will be displayed if the nickname you attempt to enter in step 2
begins with a symbol or space. Press the <m> button and enter a different
nickname.
Initial Connection via Wi-Fi
To start with, register a camera nickname.
This nickname will be displayed on the screen of target devices when
connecting to other devices via Wi-Fi.
1 Access the Wi-Fi menu.
zzPress the <1> button to turn the camera
on.
zzPress the <o> button.
After the Initial Wi-Fi Connection
2 Enter a nickname.
•
•
Once you have connected to devices via Wi-Fi, recent destinations will
be listed first when you access the Wi-Fi menu by pressing the <o>
button. You can easily connect again by pressing the <o><p> buttons
to choose the device name and then pressing the <m> button.
To add a new device, display the device selection screen by pressing the
<q><r> buttons, and then configure the setting.
zzPress the <m> button to access the
keyboard, and then enter a nickname
zzUp to 16 characters can be used.
zzPress the <o><p> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
[3] tab > [Wi-Fi Settings] > [Target History] > [Off].
zzThe Wi-Fi menu is displayed.
123
Check sheet
Connecting via an Access Point
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Also called the “access point name” or “network name”.
○ None
○ WEP (open system
authentication)
○ WPA-PSK (TKIP)
Confirming Access Point Compatibility
Network authentication / data encryption
(encryption method / encryption mode)
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
If you are already using Wi-Fi, confirm the following items. For instructions
on checking network settings, refer to the access point user manual.
The method for encrypting data during wireless transmission. ○ WPA-PSK (AES)
○ WPA2-PSK (TKIP)
○ WPA2-PSK (AES)
Password (encryption key / network key)
The key used when encrypting data during wireless
transmission. Also called the “encryption key” or
“network key”.
• If system administrator status is needed to adjust network settings,
contact the system administrator for details.
• These settings are very important for network security. Exercise
adequate caution when changing these settings.
Key index (transmit key)
The key set when WEP is used for network authentication / ○ 1
data encryption.
Connection methods vary depending on whether the access point supports
Wi-Fi Protected Setup (WPS) or not. Refer to the user manual provided with
your access point to check if it supports WPS.
• A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
• This guide refers to all Wi-Fi routers and base stations as “access points”.
• If you use MAC address filtering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s
[Check MAC Address].
124
Connecting to WPS-Compatible
Access Points
WPS makes it easy to complete settings when connecting devices over
Wi-Fi. You can use either Push Button Configuration Method or PIN Method
for settings on a WPS supported device.
zzTo connect to a Web service, choose
the service icon. If multiple recipients
or sharing options are used with a Web
service, choose the desired item on the
[Select Recipient] screen (either press
the <o><p> buttons or turn the <5>
dial), and then press the <m> button.
1 Confirm that the target device is
connected to the access point.
zzThis step is not required when connecting
to Web services.
4 Choose [Add a Device].
zzPress the <o><p> buttons or turn the
<5> dial to choose [Add a Device], and
then press the <m> button.
zzTo connect to a smartphone or printer,
when the [Waiting to connect] screen
Network] (either press the <q><r>
buttons or turn the <5> dial), and then
press the <m> button.
zzFor instructions on checking the
connection, refer to the device and
access point user manuals.
2 Access the Wi-Fi menu
3 Choose the target device.
zzChoose the target device (either press
the <o><p><q><r> buttons or turn
the <5> dial), and then press the <m>
button.
zzA list of detected access points will be
displayed.
5 Choose [WPS Connection].
zzPress the <o><p> buttons or turn the
<5> dial to choose [WPS Connection],
and then press the <m> button.
zzTo connect to a smartphone, choose [ ].
zzTo connect to a computer, choose [ ].
zzTo connect to a printer, choose [2].
125
6 Choose [PBC Method].
zzPress the <o><p> buttons or turn the
<5> dial to choose [PBC Method], and
then press the <m> button.
8 For a smartphone connection:
Start CameraWindow.
zzFor an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera’s N-Mark
(
on the smartphone.
7 Establish the connection.
zzOn the access point, hold down the WPS
connection button for a few seconds.
zzFor other smartphones, start
CameraWindow on the smartphone.
zzThe first time CameraWindow is opened,
register a smartphone nickname to be
displayed on the camera.
zzOn the camera, press the <m> button to
go to the next step.
zzOnce the smartphone is recognized on
the camera, the device connection screen
will be displayed on the camera.
zzThe camera will connect to the access
point.
zzIf you have selected [ ], [2], or [ ] in
step 3, devices connected to the access
point are listed on the [Select a Device]
screen displayed next.
zzIf you have selected a Web service in
step 3, go to step 12.
126
9 To connect to a smartphone,
printer, or computer:
Choose the target device.
zzChoose the target device name (either
press the <o><p> buttons or turn the
<5> dial), and then press the <m>
button.
11 For a smartphone connection:
Adjust the privacy setting.
zzPress the <q><r> buttons or turn the
<5> dial to choose [Yes], and then
press the <m> button.
zzYou can now use the smartphone to
images on the camera or shoot remotely
zzIf you have selected a smartphone, go to
step 11.
zzIf you have selected a printer or
Macintosh computer, go to step 12.
12 Send or print the images.
zzThe screen displayed when the devices
are connected varies depending on the
target device.
10 If you have selected a computer
running Windows in step 9 for
the first time:
zzWhen the camera is connected to a
smartphone or Web service, an image
transfer screen is displayed.
Install a driver.
zzWhen the screen at left is displayed on
the camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
zzFor instructions on sending images, see
zzWhen the camera is connected to a
computer, the camera screen is blank.
the computer.
zzDouble-click the connected camera icon.
zzDriver installation will begin.
zzAfter driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
zzWhen the camera is connected to a
printer, you can print by following the
same steps as for printing via USB. For
127
Connecting to Access Points in the List
• All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 11. To keep camera
images private, so that they cannot be viewed from the smartphone,
choose [No] in step 11.
• To change privacy settings for smartphones added to the list,
choose the smartphone whose settings you want to change from
[Edit a Device] in step 4, and then choose [View Settings].
1 View the listed access points.
zzView the listed networks (access
points) as described in steps 1 – 4 of
“Connecting to WPS-Compatible Access
2 Choose an access point.
zzPress the <o><p> buttons or turn the
<5> dial to choose a network (access
point), and then press the <m> button.
• If you chose [PIN Method] in step 6, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user manual included
with your access point.
• To add multiple destinations, repeat this procedure from the first step.
Previous Access Points
You can reconnect to any previous access points automatically by following
To reconnect to the access point, confirm that the target device is already
connected to it, and then follow the procedure from step 9. Note that this
step is not required when connecting to Web services.
3 Enter the access point
password.
zzPress the <m> button to access the
keyboard, and then enter the password
zzPress the <o><p> buttons or turn the
<5> dial to choose [Next], and then
press the <m> button.
•
•
To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure from step 5.
128
4 Choose [Auto].
Connecting without an Access Point
When connecting to a smartphone or printer via Wi-Fi, you can use the
camera as an access point (Camera Access Point mode) instead of using
another access point.
Similarly, no access point is used in camera-to-camera connections
zzPress the <o><p> buttons or turn the
<5> dial to choose [Auto], and then
press the <m> button.
zzIf you selected [ ], [2], or [ ] as the
target device, see “Connecting to WPS-
Compatible Access Points”, starting with
zzIf you selected a Web service as the
destination, see “Connecting to WPS-
Compatible Access Points”, starting with
1 Access the Wi-Fi menu
2 Choose the target device.
zzChoose the target device (either press
the <o><p><q><r> buttons or turn
the <5> dial), and then press the <m>
button.
• To determine the access point password, check on the access point itself or
refer to the user manual.
• Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 2 to manually set an access point. Follow on-
screen instructions and enter an SSID, security settings, and a password.
• When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the password in step 3.
To use the same password, choose [Next] (either press the <o><p> buttons
or turn the <5> dial) and press the <m> button.
zzTo connect to a smartphone, choose [ ].
zzTo connect to a printer, choose [2].
3 Choose [Add a Device].
zzPress the <o><p> buttons or turn the
<5> dial to choose [Add a Device], and
then press the <m> button.
129
zzThe camera’s SSID is displayed.
5 For a smartphone connection:
Start CameraWindow.
zzFor an NFC-compatible Android
smartphone (OS version 4.0 or later),
activating NFC and touching the
smartphone against the camera’s N-Mark
(
on the smartphone.
4 Connect the target device to the
network.
zzIn the smartphone or printer’s Wi-Fi
setting menu, choose the SSID (network
name) displayed on the camera to
connect to it.
zzFor other smartphones, start
CameraWindow on the smartphone.
zzThe first time CameraWindow is opened,
register a smartphone nickname to be
displayed on the camera.
zzOnce the smartphone is recognized on
the camera, the device connection screen
will be displayed on the camera.
6 Choose the target device.
zzChoose the target device name (either
press the <o><p> buttons or turn the
<5> dial), and then press the <m>
button.
130
7 For a smartphone connection:
Adjust the privacy setting.
zzPress the <q><r> buttons or turn the
<5> dial to choose [Yes], and then
press the <m> button.
• To add multiple devices, repeat this procedure from the first step.
• For better security, you can require password input on the screen in step 3
[Password] > [On]. In this case, in the password field on the device in step 4,
enter the password displayed on the camera.
zzYou can now use the smartphone to
images on the camera or shoot remotely
8 Send or print the images.
zzThe screen displayed when the devices
are connected varies depending on the
target device.
zzWhen the camera is connected to a
smartphone, an image transfer screen is
displayed.
zzFor instructions on sending images, see
zzWhen the camera is connected to a
printer, you can print by following the
same steps as for printing via USB. For
• All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 7. To keep camera
images private, so that they cannot be viewed from the smartphone,
choose [No] in step 7.
• To change privacy settings for smartphones added to the list,
choose the smartphone whose settings you want to change from
[Edit a Device] in step 3, and then choose [View Settings].
131
Previous Access Points
You can reconnect to any previous access points automatically by following
To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
• Only Canon-brand cameras equipped with a Wi-Fi function can be connected
to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot
be connected to if they do not have a Wi-Fi function. You cannot connect to
DIGITAL IXUS WIRELESS cameras with this camera.
•
•
•
When reconnecting via a previous access point, connect the target
device to the access point in step 4.
1 Access the Wi-Fi menu
To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Connecting to WPS-Compatible Access Points” from step 5
2 Choose camera.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose [4], and
then press the <m> button.
3 Choose [Add a Device].
zzPress the <o><p> buttons or turn the
<5> dial to choose [Add a Device], and
then press the <m> button.
zzFollow steps 1 – 3 on the target camera
too.
zzCamera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
132
zzWhen the target camera has been added
successfully, the image transfer screen
will be displayed. Proceed to “Sending
Sending Images
Send images wirelessly to destinations registered on the camera as follows.
Note that when images are sent to a computer, the computer is used
Sending Images Individually
• To add multiple cameras, repeat this procedure from the first step.
• Once a camera is added, the camera name will be displayed on the screen in
step 3. To connect to a camera again, simply choose the camera name from
the list.
1 Choose an image.
zzTurn the <5> dial to choose an image
to send.
133
2 Send the image.
Covering this may decrease the speed of your image transfers.
• Depending on the condition of the network you are using, it may take a long
time to send movies. Be sure to keep an eye on the camera battery level.
• When sending movies to smartphones, note that the supported image quality
varies depending on the smartphone. For details, refer to the smartphone user
manual.
• To disconnect from the camera, press the <n> button, choose [OK] on
the confirmation screen (either press the <q><r> buttons or turn the <5>
dial), and then press the <m> button. You can also use the smartphone to
end the connection.
zzPress the <q><r> buttons to choose
[Send this image], and then press the
<m> button.
zzWhen uploading to YouTube, read the
terms of service, choose [I Agree], and
press the <m> button.
zzImage transfer will begin. The screen
darkens during image transfer.
zzAfter images are uploaded to a Web
service, [OK] is displayed. Press the
<m> button to return to the playback
screen.
• On the screen, wireless signal strength is indicated by the following icons.
[
] high, [ ] medium, [ ] low, [ ] weak
• Sending images to Web services will take less time when resending images
you have already sent that are still on the CANON iMAGE GATEWAY server.
zzAfter sending images to a camera or
smartphone, [Transfer completed] will be
displayed, and the display will return to
the image transfer screen.
Choosing the Image Resolution (Size)
On the image transfer screen, choose [ ] by pressing the <o><p>
buttons, and then press the <m> button. On the next screen, choose the
resolution by pressing the <o><p> buttons, and then press the <m>
button.
compressed file is sent instead of the original file. Note that this
may delay transmission, and the file cannot be sent unless there is
enough space for it on the memory card.
•
•
To send images at original size, select [No] as the resizing option.
Choosing [ ] or [ ] will resize images that are larger than the selected
size before sending.
• Movies cannot be resized.
134
Sending Multiple Images
• Up to 50 images can be sent together at once. One movie up to five minutes
(or one digest movie up to 13 minutes) can be sent. However, Web services
may limit the number of images or length of movies you can send. For details,
refer to the Web service you are using.
• You can also choose images in step 2 by moving the zoom lever twice toward
<k> to access single-image display and then pressing the <q><r> buttons or
turning the <5> dial.
1 Choose [Select and send].
zzPress the <q><r> buttons to choose
[Select and send], and then press the
<m> button.
• In step 3, you can choose the desired resolution (size) of your images before
2 Choose images.
zzPress the <o><p><q><r> buttons to
choose an image to send, and then press
the <m> button. [ ] is displayed.
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to choose additional
images.
zzAfter you finish choosing images, press
the <n> button.
3 Send the images.
zzPress the <q><r> buttons or turn the
<5> dial to choose [Send], and then
press the <m> button.
135
Adding Comments
Using the camera, you can add comments to images that you send to
e-mail addresses, social networking services, etc. The number of characters
and symbols that can be entered may differ depending on the Web service.
Saving Images to a Computer
When sending images to a computer, use the computer instead of the
camera.
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some
software excluded).
1 Access the screen for adding
comments.
zzPress the <o><p><q><r> buttons to
choose [ ], and then press the <m>
button.
1 Display CameraWindow.
zzWindows: Access CameraWindow by
clicking [Downloads Images From Canon
Camera].
zzMac OS: CameraWindow is automatically
displayed when a Wi-Fi connection is
established between the camera and
computer.
3 Send the image.
2 Import images.
zzClick [Import Images from Camera], and
then click [Import Untransferred Images].
zzImages are now saved to the Pictures
folder on the computer, in separate
folders named by date.
• When a comment is not entered, the comment set in CANON iMAGE
GATEWAY is automatically sent.
zzClick [OK] in the screen that is displayed
after image import is complete. For
instructions on viewing images on a
computer, refer to “Software Instruction
136
Using the < > Button
• Movies will take longer to import since the file size is larger than still images.
• To disconnect from the camera, turn off the camera.
• You can also specify to save all images or only selected images to the
computer, and you can change the destination folder. Refer to “Software
<
> button, you can connect to the registered destination simply by
pressing the < > button.
• Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the
taskbar.
Registering a Smartphone to the < > Button
Once you have connected to a smartphone initially via Wi-Fi by pressing
the < > button, you can simply press the < > button after that to connect
again for viewing and saving camera images on connected devices.
• Mac OS: If CameraWindow is not displayed, click the [CameraWindow] icon
in the Dock.
• Although you can save images to a computer simply by connecting your
camera to the computer without using the software, the following limitations
apply.
- It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
1 Press the < > button.
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
- Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image
file sizes.
2 Choose the destination.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <m> button.
- Some functions provided by the software may not be available, such as
movie editing.
137
3 Establish the connection.
zzConnect to the smartphone as described
in steps 5 – 9 in “Connecting to WPS-
127) or steps 4 – 6 in “Connecting
zzAfter a connection is established with the
smartphone, the smartphone nickname
is displayed on the camera. (This screen
will close in about one minute.)
zzYou can now use the smartphone to
import images from the camera. (The
camera cannot be used to send images
to the smartphone.)
zzUse the smartphone to end the
connection; the camera will automatically
turn off.
Registering Image Sync to the < > Button
By registering Image Sync to the < > button, you can simply press the
> button to send any unsent images on the memory card to a computer
via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending
<
1 Prepare the camera.
zzRegister [ ] as the destination
zzInstall the software on the destination
computer, and configure the camera
2 Press the < > button.
zzFrom now on, you can simply press the
<
> button to connect to the registered
smartphone.
3 Choose the destination.
zzPress the <q><r> buttons or turn the
<5> dial to choose [ ], and then press
the <m> button.
zzThe camera will automatically reconnect
to any previous access points and send
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 2. To change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 5 – 9 in “Connecting to WPS-
• All images in the camera can be viewed from the connected
smartphone. Note that if you have assigned the < > button,
zzFrom now on, you can simply press the
<
> button to send images.
• One smartphone can be registered to the < > button. If you wish to register
138
Clearing Registered Destinations
Sending Images Automatically
(Image Sync)
Images on the memory card that have not been transferred already can be
sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
zzPress the <n> button, and then
choose [Mobile Device Connect Button]
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
zzAfter a confirmation message is
displayed, press the <m> button.
Initial Preparations
Install and configure the software on the destination computer.
• Registered destinations are also cleared when you reset Wi-Fi settings
1 Install the software.
zzInstall the software on a computer
2 Register the camera.
zzWindows: In the taskbar, right-click [ ],
and then click [Add new camera].
zzMac OS: In the menu bar, click [ ], and
then click [Add new camera].
zzA list of cameras linked to CANON
Choose the camera from which images
are to be sent.
zzOnce the camera is registered and the
computer is ready to receive images, the
icon changes to [ ].
139
3 Choose the type of images
to send (only when sending
movies with images).
zzPress the <n> button, and then
choose [Wi-Fi Settings] on the [3] tab
zzPress the <o><p> buttons to choose
[Image Sync], and then press the <q><r>
buttons to choose [Stills/Movies].
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer
and save the images.
choose [ ].
zzOnce the connection is established, the
images are sent.
zzWhen the images have been sent
successfully to the CANON iMAGE
GATEWAY server, [ ] is displayed on
the screen.
zzImages are automatically saved to the
computer when you turn it on.
zzImages are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer
is off.
• When sending images, you should use a fully charged battery pack
• Even if images were imported to the computer through a different method, any
images not sent to the computer via CANON iMAGE GATEWAY will be sent to
the computer.
• Sending is faster when the destination is a computer on the same network as
the camera, because images are sent via the access point instead of CANON
iMAGE GATEWAY. Note that images stored on the computer are sent to
CANON iMAGE GATEWAY, so the computer must be connected to the Internet.
140
Geotagging Images on the Camera
GPS data recorded on a smartphone using the dedicated CameraWindow
tagged with information including the latitude, longitude, and elevation.
Shooting Remotely
As you check a shooting screen on your smartphone, you can use it to
shoot remotely.
1 Secure the camera.
• Before shooting, make sure the date and time and your home time
destinations that are in other time zones.
• The smartphone you will use for geotagging must be authorized to
• Others may be able to locate or identify you by using location data
in your geotagged still images or movies. Be careful when sharing
these images with others, as when posting images online where
many others can view them.
zzOnce remote shooting begins, the
camera lens will come out. Lens motion
from zooming may also move the camera
out of position. Keep the camera still by
mounting it on a tripod or taking other
measures.
2 Connect the camera and
choose [Yes].
3 Choose remote shooting.
smartphone, choose remote shooting.
zzThe camera lens will come out. Do not
press near the lens, and make sure no
objects will obstruct it.
zzOnce the camera is ready for remote
shooting, a live image from the camera
will be displayed on the smartphone.
zzAt this time, a message is displayed
on the camera, and all operations
except pressing the ON/OFF button are
disabled.
141
4 Shoot.
Editing or Erasing Wi-Fi Settings
zzUse the smartphone to shoot.
Edit or erase Wi-Fi settings as follows.
• The camera works in [G] mode during remote shooting. However,
some FUNC. and MENU settings you have configured in advance
may be changed automatically.
Editing Connection Information
• Movie shooting is not available.
• In camera settings, the smartphone must be allowed to view camera
1 Access the Wi-Fi menu
2 Choose a device to edit.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose the icon
of the device to edit, and then press the
<m> button.
• Any jerky subject motion shown on the smartphone due to the connection
environment will not affect recorded images.
• No AF frames are displayed. Capture a test image to check the focus.
• Captured images are not transferred to the smartphone. Use the smartphone
to browse and import images from the camera.
• Remote control is also possible from the smartphone assigned to the <
>
3 Choose [Edit a Device].
zzPress the <o><p> buttons or turn the
<5> dial to choose [Edit a Device], and
then press the <m> button.
4 Choose a device to edit.
zzPress the <o><p> buttons or turn the
<5> dial to choose the device to edit,
and then press the <m> button.
142
5 Choose an item to edit.
zzPress the <o><p> buttons or turn the
<5> dial to choose an item to edit, and
then press the <m> button.
zzThe items you can change depend on
what device or service the camera will
access.
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on
the camera.
zzFollowing step 5 in “Editing Connection
Device Nickname] and press the <m>
button.
Connection
Web
Configurable Items
zzSelect the input field and press the <m>
button. Use the keyboard displayed to
4
c
Services
–
O
–
O
O
O
O
–
O
–
–
–
Erasing Connection Information
Erase connection information (information about devices that you have
connected to) as follows.
O
O
O
–
O
: Configurable : Not configurable
zzFollowing step 5 in “Editing Connection
Connection Info] and press the <m>
button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <5> dial to
choose [OK], and then press the <m>
button.
zzThe connection information will be
erased.
143
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the camera
to another person, or dispose of it.
1 Choose [Wi-Fi Settings].
zzPress the <n> button, and then
choose [Wi-Fi Settings] on the [3] tab
2 Choose [Reset Settings].
zzPress the <o><p> buttons or turn the
<5> dial to choose [Reset Settings],
and then press the <m> button.
3 Restore the default settings.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
zzThe Wi-Fi settings are now reset.
• Resetting the Wi-Fi settings will also clear all Web service settings. Be sure
that you want to reset all Wi-Fi settings before using this option.
• To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] in the
144
Setting Menu
Customize or adjust basic camera functions for greater convenience
Formatting Memory Cards ..................................149
Adjusting Basic Camera Functions.............. 146
File Numbering....................................................151
Date-Based Image Storage.................................151
Metric / Non-Metric Display.................................151
Checking Certification Logos ..............................152
Display Language ...............................................152
Adjusting Other Settings .....................................152
Restoring Defaults...............................................152
Silencing Camera Operations .............................146
Adjusting the Volume ..........................................146
Hiding Hints and Tips ..........................................146
Date and Time.....................................................147
World Clock.........................................................147
Lens Retraction Timing .......................................147
Using Eco Mode..................................................148
Power-Saving Adjustment...................................148
Screen Brightness...............................................149
Hiding the Start-Up Screen .................................149
145
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
Adjusting Basic Camera Functions
commonly used functions as desired, for greater convenience.
zzChoose [Volume], and then press the
<m> button.
zzChoose an item, and then press the
<q><r> buttons to adjust the volume.
Silencing Camera Operations
Silence camera sounds and movies as follows.
zzChoose [Mute], and then choose [On].
Hiding Hints and Tips
• Operation can also be silenced by holding down the <l> button as you
turn the camera on.
To restore sound during movies, press the <o> button. Adjust volume with the
<o><p> buttons, as needed.
zzChoose [Hints & Tips], and then choose
[Off].
146
Date and Time
Adjust the date and time as follows.
2 Switch to the destination time
zone.
zzPress the <o><p> buttons or turn the
<5> dial to choose [ World], and then
press the <n> button.
zz[ ] is now shown on the shooting screen
zzChoose [Date/Time], and then press the
<m> button.
zzPress the <q><r> buttons to choose an
option, and then adjust the setting, either
by pressing the <o><p> buttons or
turning the <5> dial.
update your [
Home] time and date.
World Clock
Lens Retraction Timing
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the
Date/Time setting manually.
Before using the world clock, be sure to set the date and time and your
The lens is normally retracted for safety about one minute after you press
immediately after you press the <1> button, set the retraction timing to
[0 sec.].
zzChoose [Lens Retract], and then choose
[0 sec.].
1 Specify your destination.
zzChoose [Time Zone], and then press the
<m> button.
zzPress the <o><p> buttons or turn the
<5> dial to choose [ World], and then
press the <m> button.
zzPress the <q><r> buttons to choose the
destination.
zzTo set daylight saving time (1 hour
ahead), choose [ ] by pressing the
<o><p> buttons or turning the <5>
dial, and then choose [ ] by pressing
the <q><r> buttons.
zzPress the <m> button.
147
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
zzChoose [Power Saving], and then press
the <m> button.
zzAfter choosing an item, press the
<q><r> buttons to adjust it as needed.
1 Configure the setting.
zzChoose [Eco Mode], and then choose
[On].
zz[ ] is now shown on the shooting
zzThe screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
• These power-saving functions are not available when you have set Eco mode
2 Shoot.
zzTo activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
148
Screen Brightness
Adjust screen brightness as follows.
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images
on the memory card to a computer, or take other steps to back them up.
zzChoose [LCD Brightness], and then
press the <q><r> buttons to adjust the
brightness.
1 Access the [Format] screen.
zzChoose [Format], and then press the
<m> button.
2 Choose [OK].
• For maximum brightness, press and hold the <l> button for at least
two seconds when the shooting screen is displayed or when in single-image
display. (This will override the [LCD Brightness] setting on the [3] tab.)
To restore the original brightness, press and hold the <l> button again for
at least two seconds or restart the camera.
zzPress the <o><p> buttons to choose
[Cancel], choose [OK] (either press the
<q><r> buttons or turn the <5> dial),
and then press the <m> button.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
zzChoose [Start-up Image], and then
choose [Off].
149
3 Format the memory card.
zzTo begin the formatting process, press
the <o><p> buttons or turn the <5>
dial to choose [OK], and then press the
<m> button.
zzWhen formatting is finished, [Memory
card formatting complete] is displayed.
Press the <m> button.
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing is
slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level
formatting, copy images on the memory card to a computer, or take other
steps to back them up.
zzOn the screen in step 1 of “Formatting
<o><p> buttons or turn the <5> dial
to choose [Low Level Format], and then
press the <q><r> buttons to select this
option. A [ ] icon is displayed.
• Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
zzFollow steps 2 – 3 in “Formatting Memory
formatting process.
• The total card capacity indicated on the formatting screen may be less than
the advertised capacity.
because data is erased from all storage regions of the memory card.
• You can cancel low-level formatting in progress by choosing [Stop]. In this
case, all data will be erased, but the memory card can be used normally.
150
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns file numbers.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
zzChoose [Create Folder], and then choose
[Daily].
zzChoose [File Numbering], and then
choose an option.
zzImages will now be saved in folders
created on the shooting date.
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information
elsewhere from m/cm to ft/in as needed.
Images are numbered consecutively (until the 9999th shot is taken/
saved) even if you switch memory cards.
Continuous
Image numbering is reset to 0001 if you switch memory cards,
or when a new folder is created.
Auto Reset
• Regardless of the option selected in this setting, shots may be numbered
consecutively after the last number of existing images on newly inserted
memory cards. To start saving shots from 0001, use an empty (or formatted
folder structure and image formats.
zzChoose [Units], and then choose [ft/in].
151
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed
on the screen. Other certification logos are printed in this guide, on the
camera packaging, or on the camera body.
Adjusting Other Settings
The following settings can also be adjusted on the [3] tab.
•
•
•
•
zzChoose [Certification Logo Display], and
then press the <m> button.
Restoring Defaults
If you accidentally change a setting, you can restore default camera
settings.
Display Language
Change the display language as needed.
1 Access the [Reset All] screen.
zzChoose [Reset All], and then press the
<m> button.
zzChoose [Language ], and then press
the <m> button.
zzPress the <o><p><q><r> buttons or
turn the <5> dial to choose a language,
and then press the <m> button.
2 Restore default settings.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
• You can also access the [Language] screen in Playback mode by pressing and
holding the <m> button and immediately pressing the <n> button.
zzDefault settings are now restored.
152
• The following functions are not restored to default settings.
[Language
153
Accessories
Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately
System Map .................................................... 155 Using the Software......................................... 160
Software..............................................................160
Computer Connections via a Cable ....................161
Saving Images to a Computer.............................161
Optional Accessories..................................... 156
Power Supplies ...................................................156
Other Accessories...............................................156
Printers................................................................156
Printing Images .............................................. 163
Easy Print............................................................163
Configuring Print Settings ...................................164
Printing Movie Scenes ........................................166
Adding Images to the Print List (DPOF)..............167
Adding Images to a Photobook...........................169
Using Optional Accessories.......................... 157
Playback on a TV................................................157
Powering the Camera with Household Power.....159
154
Use of genuine Canon accessories is recommended.
System Map
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Included Accessories
Canon shall not be liable for any damage to this product and/or accidents such as fire,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that this warranty does not apply to
repairs arising out of the malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
Battery Pack
NB-6LH*1
Battery Charger
CB-2LY/CB-2LYE*1
Wrist Strap
Note that availability varies by area, and some accessories may no longer be available.
USB Cable (camera end: Mini-B)*2
Memory Card
Card Reader
Power
Computer
HDMI Cable (camera end: Type D)*3
Cables
AC Adapter Kit
ACK-DC40
TV/Video
System
Stereo AV Cable AVC-DC400ST
Canon-Brand PictBridge-Compatible
Printers
*1Also available for purchase separately.
*2A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
*3Use a commercially available cable no longer than 2.5 m.
155
Optional Accessories
• The battery charger and AC adapter kit can be used in areas with
100 – 240 V AC power (50/60 Hz).
• For power outlets in a different format, use a commercially available
adapter for the plug. Never use an electrical transformer designed
for traveling, which may damage the battery pack.
The following camera accessories are sold separately. Note that availability
varies by area, and some accessories may no longer be available.
Power Supplies
Other Accessories
Battery Pack NB-6LH
zzRechargeable lithium-ion battery
Interface Cable IFC-400PCU
zzFor connecting the camera to a computer
or printer.
Battery Charger CB-2LY/CB-2LYE
zzCharger for Battery Pack NB-6LH
• The battery pack includes a convenient cover which you can attach to know
the charging status at a glance. Attach the cover so that is visible on a
charged battery pack, and attach it so that is not visible on an uncharged
battery pack.
Stereo AV Cable AVC-DC400ST
zzConnect the camera to a TV to enjoy
playback on the larger TV screen.
• Battery Pack NB-6L is also supported.
AC Adapter Kit ACK-DC40
zzFor powering the camera using
household power. Recommended when
using the camera over extended periods,
or when connecting the camera to a
printer or computer. Cannot be used to
charge the battery pack in the camera.
Printers
Canon-Brand PictBridge-
Compatible Printers
zzPrinting images without a computer is
possible by connecting the camera to
a Canon-brand PictBridge-compatible
printer.
For details, visit your nearest Canon
retailer.
156
Still Images
Movies
Movies
zzOn the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
Using Optional Accessories
Still Images
Playback on a TV
By connecting the camera to a TV, you can view your shots on the larger
screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
3 Turn the TV on and switch to
video input.
zzSwitch the TV input to the video input you
connected the cable to in step 2.
Still Images
Movies
4 Turn the camera on.
zzPress the <1> button to turn the camera
on.
Playback on a High-Definition TV
You can view your shots on a TV by connecting the camera to an HDTV
with a commercially available HDMI cable (not exceeding 2.5 m, with a
Type D terminal on the camera end). Movies shot at a resolution of [
zzImages from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
zzWhen finished, turn off the camera and
TV before disconnecting the cable.
],
[
] or [
] can be viewed in high definition.
1 Make sure the camera and TV
are off.
• Camera operating sounds are not played while the camera is connected to an
HDTV.
2 Connect the camera to the TV.
zzOn the TV, insert the cable plug fully into
the HDMI input as shown.
157
Still Images
Movies
4 Control the camera with the TV
remote.
zzPress the <q><r> buttons on the remote
to browse images.
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
Depending on the TV, you may need to adjust some TV settings.
For details, refer to the TV manual.
zzTo display the camera control panel,
press the OK/Select button. Select
control panel options by pressing the
<q><r> buttons to choose an option,
and then pressing the OK/Select button
again.
1 Configure the setting.
zzPress the <n> button, choose
[Ctrl via HDMI] on the [3] tab, and then
Camera Control Panel Options Shown on the TV
Return
Closes the menu.
when a grouped image is selected.)
]
2 Connect the camera to the TV.
zzFollow steps 1 – 2 in “Playback on a
the camera to the TV.
Group Playback
Starts movie playback. (Only displayed when a movie
is selected.)
Play Movie
Slideshow
Starts slideshow playback. To switch images during
playback, press the <q><r> buttons on the remote
control.
3 Display images.
.
zzTurn on the TV. On the camera, press the
<1> button.
Index Playback
Change Display
Displays multiple images in an index.
zzImages from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
l
• Pressing buttons, such as the <n> button, on the camera will switch
control to the camera itself, which will prevent remote control until you return to
single-image display.
• Moving the zoom lever on the camera will switch control to the camera itself,
which will prevent remote control until you return to single-image display.
• The camera may not always respond correctly even if the remote is for an
HDMI CEC-compatible TV.
158
Still Images
Movies
• When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
Playback on a Standard-Definition TV
Connecting the camera to a TV with the Stereo AV Cable AVC-DC400ST
(sold separately) enables you to view your shots on the larger screen of the
TV as you control the camera.
Still Images
Movies
1 Make sure the camera and TV
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC40 (sold separately)
eliminates the need to monitor the remaining battery level.
are off.
White
Red
2 Connect the camera to the TV.
Yellow
Yellow
zzOn the TV, insert the cable plugs fully into
the video inputs as shown.
1 Make sure the camera is off.
Red
White
2 Insert the coupler.
zzFollow step 1 in “Inserting the Battery
open the cover.
zzOn the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
zzInsert the coupler facing the direction
shown, just as you would a battery pack
(following step 2 in “Inserting the Battery
zzFollow step 4 in “Inserting the Battery
close the cover.
Terminals
3 Display images.
zzFollow steps 3 – 4 in “Playback on a
images.
3 Connect the adapter to the
coupler.
zzOpen the cover and insert the adapter
plug fully into the coupler.
• Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the <n> button and choose
[Video System] on the [3] tab.
159
4 Connect the power cord.
zzInsert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
Using the Software
The software available for download from the Canon website is introduced
below, with instructions for installation and saving images to a computer.
zzTurn the camera on and use it as desired.
zzWhen finished, turn the camera off and
unplug the power cord from the outlet.
Software
After downloading the software from the Canon website and installing it,
you can do the following things on your computer.
• Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
• Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
CameraWindow
zzImport images and change camera settings
ImageBrowser EX
zzManage images: view, search, and organize
zzPrint and edit images
• Internet access is required, and any ISP account charges and
access fees must be paid separately.
Software Instruction Manual
Refer to the instruction manual when using the software. The manual can
be downloaded from the following URL:
http://www.canon.com/icpd/
160
Computer Connections via a Cable
Saving Images to a Computer
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (some
software excluded).
Checking Your Computer Environment
The software can be used on the following computers. For detailed system
requirements and compatibility information, including support in new
operating systems, visit the Canon website.
1 Connect the camera to the
computer.
zzWith the camera turned off, open the
cover ( ). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal ( ).
Windows
Mac OS
Windows 8/8.1
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Operating
System*
Mac OS X 10.9
Mac OS X 10.8
Mac OS X 10.7
* When sending images to a computer via Wi-Fi, check the system requirements in
zzInsert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.
• Check the Canon website for the latest system requirements, including
supported OS versions.
Installing the Software
2 Turn the camera on to access
CameraWindow.
zzPress the <1> button to turn the camera
on.
zzMac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
zzWindows: Follow the steps introduced
below.
zzIn the screen that displays, click the [
]
link to modify the program.
161
zzChoose [Downloads Images From Canon
Camera] and then click [OK].
• Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the
taskbar.
• Windows Vista or XP: To start CameraWindow, click [Downloads Images From
Canon Camera] on the screen displayed when you turn the camera on in
step 2. If CameraWindow is not displayed, click the [Start] menu and choose
[All Programs] ► [Canon Utilities] ► [CameraWindow] ► [CameraWindow].
• Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
zzDouble-click [
].
•
Although you can save images to a computer simply by connecting your camera
to the computer without using the software, the following limitations apply.
- It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
CameraWindow
- Images shot in vertical orientation may be saved in horizontal orientation.
- Image protection settings may be cleared from images saved to a computer.
3 Save the images to the
computer.
zzClick [Import Images from Camera], and
then click [Import Untransferred Images].
zzImages are now saved to the Pictures
folder on the computer, in separate
folders named by date.
- Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image
file sizes.
- Some functions provided by the software may not be available, such as
movie editing.
zzAfter images are saved, close
CameraWindow, press the <1> button
to turn the camera off, and unplug the
cable.
zzFor instructions on viewing images on a
computer, refer to “Software Instruction
162
Still Images
Movies
3 Turn the printer on.
Printing Images
Your shots can easily be printed by connecting the camera to a printer.
On the camera, you can specify images to set up batch printing, prepare
orders for photo development services, and prepare orders or print images
for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
4 Turn the camera on.
zzPress the <1> button to turn the camera
on.
5 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image.
6 Access the printing screen.
Still Images
m
zzPress the < > button, choose [c], and
Easy Print
press the < > button again.
m
Easily print your shots by connecting the camera to a PictBridge-compatible
printer (sold separately) with the USB cable.
1 Make sure the camera and
printer are off.
7 Print the image.
zzPress the <o><p> buttons or turn the
<5> dial to choose [Print], and then
press the <m> button.
2 Connect the camera to the
printer.
zzOpen the cover. Holding the smaller
cable plug in the orientation shown, insert
the plug fully into the camera terminal.
zzConnect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
zzPrinting now begins.
zzTo print other images, repeat the above
procedures starting from step 5 after
printing is finished.
zzWhen you are finished printing, turn the
camera and printer off and disconnect
the cable.
• For Canon-brand PictBridge-compatible printers (sold separately), see
163
Still Images
Still Images
Configuring Print Settings
Cropping Images before Printing
By cropping images before printing, you can print a desired image area
instead of the entire image.
1 Access the printing screen.
zzFollow steps 1 – 6 in “Easy Print”
1 Choose [Cropping].
zzAfter following step 1 in “Configuring Print
screen, choose [Cropping] and press the
<m> button.
2 Configure the settings.
zzPress the <o><p> buttons or turn
the <5> dial to choose an item, and
then choose an option by pressing the
<q><r> buttons.
zzA cropping frame is now displayed,
indicating the image area to print.
Default
Date
Matches current printer settings.
Prints images with the date added.
Prints images with the file number added.
Prints images with both the date and file number added.
–
2 Adjust the cropping frame as
needed.
zzTo resize the frame, move the zoom lever
or turn the <5> dial.
zzTo move the frame, press the
<o><p><q><r> buttons.
zzTo rotate the frame, press the <l>
button.
File No.
Both
Off
Default
Off
Matches current printer settings.
–
Uses information from the time of shooting to print under
optimal settings.
On
zzWhen finished, press the <m> button.
Red-Eye 1 Corrects red-eye.
3 Print the image.
to print.
No. of Copies Choose the number of copies to print.
–
Cropping
Paper
Settings
Specify the paper size, layout, and other details
–
• Cropping may not be possible at small image sizes, or at some
aspect ratios.
• Dates may not be printed correctly if you crop images shot with
[Date Stamp
] selected.
164
Still Images
4 Choose a layout.
zzPress the <o><p> buttons or turn the
<5> dial to choose an option.
zzWhen choosing [N-up], press the
<q><r> buttons to specify the number of
images per sheet.
Choosing Paper Size and Layout before Printing
1 Choose [Paper Settings].
zzAfter following step 1 in “Configuring Print
screen, choose [Paper Settings] and
press the <m> button.
zzPress the <m> button.
5 Print the image.
2 Choose a paper size.
zzPress the <o><p> buttons or turn the
<5> dial to choose an option, and then
press the <m> button.
Available Layout Options
Default
Matches current printer settings.
Bordered
Borderless
N-up
Prints with blank space around the image.
Borderless, edge-to-edge printing.
Choose how many images to print per sheet.
Prints images for identification purposes.
Only available for images with a resolution of L and an aspect ratio of 4:3.
ID Photo
3 Choose a type of paper.
zzPress the <o><p> buttons or turn the
<5> dial to choose an option, and then
press the <m> button.
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Fixed Size
Still Images
Printing ID Photos
1 Choose [ID Photo].
zzFollowing steps 1 – 4 in “Choosing
Paper Size and Layout before Printing”
press the <m> button.
165
Movies
2 Choose the long and short side
length.
Printing Movie Scenes
zzPress the <o><p> buttons or turn the
<5> dial to choose an item. Choose the
length by pressing the <q><r> buttons,
and then press the <m> button.
1 Access the printing screen.
zzFollow steps 1 – 6 in “Easy Print”
at left is displayed.
2 Choose a printing method.
zzPress the <o><p> buttons or turn
the <5> dial to choose [ ], and then
press the <q><r> buttons to choose the
printing method.
3 Choose the printing area.
zzFollow step 2 in “Cropping Images before
area.
3 Print the image.
4 Print the image.
Movie Printing Options
Single
Prints the current scene as a still image.
Prints a series of scenes, a certain interval apart, on a single sheet of
paper. You can also print the folder number, file number, and elapsed
time for the frame by setting [Caption] to [On].
Sequence
• To cancel printing in progress, press the <m> button.
• [ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridge-
compatible printers from CP720/CP730 and earlier models.
166
Still Images
• Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
Adding Images to the Print List (DPOF)
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of copies,
as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
• Setting [Date] to [On] may cause some printers to print the date
twice.
Still Images
• Specifying [Index] will prevent you from choosing [On] for both [Date] and
[File No.] at the same time.
• Index printing is not available on some Canon-brand PictBridge-compatible
printers (sold separately).
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and
other settings as follows. These settings apply to all images in the print list.
• The date is printed in a format matching setting details in [Date/Time] on the
zzPress the <n> button, and then
choose [Print Settings] on the [2] tab.
Choose and configure items as desired
Still Images
Setting Up Printing for Individual Images
1 Choose [Select Images & Qty.].
zzPress the <n> button, choose
[Select Images & Qty.] on the [2] tab,
Standard
Index
One image is printed per sheet.
and then press the < > button.
m
Smaller versions of multiple images are printed
per sheet.
Print Type
Both
On
Both standard and index formats are printed.
Images are printed with the shooting date.
–
Date
Off
On
Images are printed with the file number.
File No.
–
Off
All image print list settings are cleared after
printing.
On
Off
Clear DPOF
data
–
167
Still Images
2 Choose an image.
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
Setting Up Printing for All Images
zzFollowing step 1 in “Setting Up Printing
[Select All Images] and press the <m>
button.
zzYou can now specify the number of copies.
zzIf you specify index printing for the image, it
is labeled with a [ ] icon. To cancel index
printing for the image, press the <m>
button again. [ ] is no longer displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
3 Specify the number of prints.
zzPress the <o><p> buttons or turn the
<5> dial to specify the number of prints
(up to 99).
zzTo set up printing for other images and
specify the number of prints, repeat
steps 2 – 3.
zzPrinting quantity cannot be specified for
index prints. You can only choose which
images to print, by following step 2.
zzWhen finished, press the <n> button
to return to the menu screen.
Still Images
Clearing All Images from the Print List
zzFollowing step 1 in “Setting Up Printing
[Clear All Selections] and press the <m>
button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
Still Images
Setting Up Printing for a Range of Images
zzFollowing step 1 in “Setting Up Printing
[Select Range] and press the <m> button.
zzFollow steps 2 – 3 in “Selecting a Range”
zzPress the <o><p> buttons to choose
[Order], and then press the <m> button.
168
Still Images
Still Images
Adding Images to a Photobook
Printing Images Added to the Print List (DPOF)
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the software on your computer,
where they are stored in their own folder. This is convenient when ordering
printed photobooks online or printing photobooks with your own printer.
zzWhen images have been added to the
at left is displayed after you connect
the camera to a PictBridge-compatible
printer. Press the <o><p> buttons to
choose [Print now], and then simply press
the <m> button to print the images in the
print list.
Choosing a Selection Method
zzPress the <n> button, choose
[Photobook Set-up] on the [1] tab, and
then choose how you will select images.
zzAny DPOF print job that you temporarily
stop will be resumed from the next image.
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
169
Still Images
Still Images
Adding Images Individually
Adding All Images to a Photobook
1 Choose [Select].
[Select All Images] and press the <m>
button.
[Select] and press the <m> button.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
2 Choose an image.
Still Images
zzPress the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
Removing All Images from a Photobook
[Clear All Selections] and press the <m>
button.
zz[ ] is displayed.
zzTo remove the image from the photobook,
press the <m> button again. [ ] is no
longer displayed.
zzPress the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
zzRepeat this process to specify other
images.
zzWhen finished, press the <n> button
to return to the menu screen.
170
Appendix
Helpful information when using the camera
Troubleshooting............................................. 172 Functions and Menu Tables.......................... 180 Handling Precautions .................................... 188
Functions Available in Each Shooting Mode.......180
FUNC. Menu .......................................................182
On-Screen Messages..................................... 175
Specifications................................................. 189
On-Screen Information .................................. 178
Shooting (Information Display)............................178
Playback (Detailed Information Display) .............179
4
Shooting Tab Menu........................................184
3Set Up Tab Menu ...........................................187
1Playback Tab Menu .......................................187
2Print Tab Menu...............................................187
Playback Mode FUNC. Menu..............................188
171
Shooting
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Cannot shoot.
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are
recorded in movies.
Power
Nothing happens when the ON/OFF button is pressed.
• The screen may flicker and horizontal banding may appear under fluorescent or LED
lighting.
No date stamp is added to images.
• Configure the [Date Stamp
added to images automatically, merely because you have configured the [Date/Time]
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery pack a few times.
The battery pack runs out of power quickly.
• Battery performance decreases at low temperatures. Try warming the battery pack a
little by putting it in your pocket, for example, ensuring that the terminals do not touch
any metal objects.
[h] flashes on the screen when the shutter button is pressed, and
• If these measures do not help and the battery pack still runs out of power soon after
charging, it has reached the end of its life. Purchase a new battery pack.
[
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery pack a few times.
• Mount the camera on a tripod or take other measures to keep it still. In this case, you
The lens is not retracted.
• Do not open the memory card/battery cover while the camera is on. Close the cover,
The battery pack is swollen.
Shots are out of focus.
• Battery swelling is normal and does not pose any safety concerns. However, if
battery swelling prevents the battery pack from fitting in the camera, contact a Canon
Customer Support Help Desk.
• Press the shutter button halfway to focus on subjects before pressing it all the way
Display on a TV
• Confirm that unneeded functions such as macro are deactivated.
172
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
activated in flash shots. For best results, have subjects look at the red-eye reduction
lamp. Also try increasing the lighting in indoor scenes and shooting at closer range.
Subjects in shots look too dark.
Recording to the memory card takes too long, or continuous shooting
is slower.
Shooting settings or FUNC. menu settings are not available.
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
Subjects look too bright, highlights are washed-out.
The Babies or Children icon does not display.
• The Babies and Children icons will not display if the birthday is not set in face
• Reduce the lighting on subjects.
• Adjust brightness by using flash exposure compensation or changing the flash output
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
• Use the camera to format the memory card, or switch to a card that supports high-
speed recording. Note that even if the elapsed time display is incorrect, the length
190).
Subjects in flash shots look too bright, highlights are washed-out.
• Adjust brightness by using flash exposure compensation or changing the flash output
[
] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
Zooming is not possible.
modes.
173
Subjects look distorted.
• Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
Wi-Fi
Cannot access the Wi-Fi menu by pressing the <o> button.
• The Wi-Fi menu is not available in Shooting mode. Switch to Playback mode and try
again.
Playback
• In Playback mode, the Wi-Fi menu cannot be accessed during magnified display or
index display. Switch to single-image display and try again. Similarly, the Wi-Fi menu
cannot be accessed during group playback or filtered image display according to
specified conditions. Cancel group or filtered image playback.
Playback is not possible.
• Image or movie playback may not be possible if a computer is used to rename files or
on folder structure and file names.
• The Wi-Fi menu cannot be accessed while the camera is connected to a printer,
computer, or TV via a cable. Disconnect the cable.
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
• There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
Cannot add a device/destination.
• A total of 20 items of connection information can be added to the camera. Erase
unneeded connection information from the camera first, and then add new devices/
• To add a smartphone, first install the dedicated application CameraWindow on your
• To add a computer, first install the software CameraWindow on your computer.
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
the movie is faint.
because audio is not recorded in these modes.
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Memory Card
The memory card is not recognized.
Cannot connect to the access point.
• Confirm that the access point channel is set to a channel supported by the camera
supported channel manually.
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the <1> button to enter Playback mode. Hold the <n> button down as
you press the <o> and <m> buttons at the same time. On the next screen, press
the <q><r> buttons to choose [B], and then press the <m> button.
174
Cannot send images.
• The destination device has insufficient storage space. Increase the storage space on
the destination device and resend the images.
On-Screen Messages
If an error message is displayed, respond as follows.
• The write-protect tab of the memory card in the destination camera is set to the
locked position. Slide the write-protect tab to the unlocked position.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
• Images are not sent to CANON iMAGE GATEWAY or other Web services if you move
or rename image files or folders on the computer that received images sent using
files or folders on the computer, make sure the images have already been sent to
CANON iMAGE GATEWAY or other Web services.
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
Cannot resize images for sending.
• Images cannot be resized to be bigger than the resolution setting of their original size.
• Movies cannot be resized.
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
Images take a long time to send./The wireless connection is disrupted.
• If the same error message is displayed even after you have formatted a supported
a Canon Customer Support Help Desk.
• Multiple images may take a long time to send. Try resizing the image to [ ] or [
]
• Movies may take a long time to send.
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note
that images may take a long time to send even when [ ] is displayed.
Insufficient space on card
•
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
No Image.
• The memory card does not contain any images that can be displayed.
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
175
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to
category/Unselectable image./No identification information
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
A camera error was detected (error number)
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case,
write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
File Error
images that have been altered using computer software, even if the camera is
connected to the printer.
Invalid selection range
choose an initial image that was after the final image, or vice-versa.
Print error
setting is correct, restart the printer and complete the setting on the camera again.
Exceeded selection limit
correctly. Reduce the number of selected images and try again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Naming error!
• The folder could not be created or images could not be recorded, because the highest
supported folder number (999) for storing images on the card has been reached and
the highest supported image number (9999) for images in folders has been reached.
Lens Error
• This error may occur if the lens is held while it is moving, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error message may indicate camera damage. In this case,
contact a Canon Customer Support Help Desk.
176
Receiving failed
Insufficient space on card
Wi-Fi
Connection failed
• There is not enough free space on the memory card in the target camera to receive
images. Erase images to create space on the memory card, or insert a memory card
with sufficient space.
• A device could not be found. Turn the camera off and on again, and retry the
connection.
Receiving failed
Memory card locked
• The write-protect tab of the memory card in the camera to receive the images is set to
• Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
• The WPS buttons on numerous access points were pressed simultaneously.
Try reconnecting again.
the locked position. Slide the write-protect tab to the unlocked position.
Receiving failed
Naming error!
No access points found
• Check to make sure that the access point is turned on.
• When the highest folder number (999), and the highest image number (9999) have
been reached on the receiving camera, images cannot be received.
• When connecting to an access point manually, make sure that you entered the
correct SSID.
Insufficient space on server
• Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.
Incorrect password/Incorrect Wi-Fi security settings
IP address conflict
• Reset the IP address so that it does not conflict with another.
Check network settings
• Check to make sure your computer can connect to the Internet with the current
network settings.
Disconnected/Receiving failed/Sending failed
• You may be in an environment where Wi-Fi signals are obstructed.
• Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices,
and other devices that operate on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
• Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk.
177
Remaining time
Focusing range
Shutter speed
Aperture value
Exposure
compensation level
Image stabilization
MF indicator
Exposure shift bar
Exposure level
Exposure
compensation bar
On-Screen Information
Shooting (Information Display)
(
(
74), AF lock
79)
Blink detection
Spot AE point frame
Date stamp
Hybrid Auto mode
* In [
] mode, indicates the number of shots available.
Battery Level
An on-screen icon or message indicates the battery charge level.
Shooting mode
Drive mode
Mercury lamp
White balance
Battery level
Still image
compression
Recordable shots*
Movie quality
Digital zoom
magnification
tele-converter
Display
Details
Scene icon
Sufficient charge
Slightly depleted, but sufficient
Flash mode
(Blinking red)
Nearly depleted—charge the battery pack soon
Depleted—charge the battery pack immediately
Red-eye correction
[Charge the battery]
Flash exposure
compensation /
Flash output level
Metering method
Camera shake
IS mode icon
178
Still images:
File size
Playback (Detailed Information Display)
Movies: Playback
• Some information may not be displayed when viewing images on a TV
Exit
Play
Slow Motion (To adjust the playback speed, press the <q><r> buttons or turn
Movies
Folder number – File
Shooting date/time
White balance
Mercury lamp
the <5> dial. No sound is played.)
High-speed burst
Current image no. /
Total no. of images
Battery level
Wi-Fi signal strength
Image Sync
keep holding down the <m> button.)
(
14)
Previous Frame (For fast-rewind, keep holding down the <m> button.)
My Colors
Shooting mode
Shutter speed
Aperture value
Exposure
compensation level
Metering method
Creative Shot effect
Focusing range
Red-eye correction
i-Contrast
Digest movies,
Group playback,
Image quality
(movies)
Compression (image
quality) / Resolution,
MP4 (movies)
Next Frame (For fast-forward, keep holding down the <m> button.)
holding down the <m> button.)
*
c
Shown when the camera is connected to a PictBridge-compatible printer
* Displays the frame approx. 4 sec. before or after the current frame.
Image editing
Movie compression
• During movie playback, you can skip back or forward (or to the previous or
next clip) by pressing the <q><r> buttons.
Flash exposure
compensation
179
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
K
E
DBMG
I
Pt
E
Function
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
][$
1
Delay*
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
2
Shots*
–
O
–
–
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
–
O
O
O
O
–
O
–
O
–
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
h
Z
!
O
O
O
O
–
O
*3
*3
*3
–
–
O
O
O
–
O
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
O
O
O
–
–
–
–
O
O
–
O
O
–
–
–
–
–
–
–
O
O
–
*1 Cannot be set to 0 seconds in modes without selection of the number of shots.
*2 One shot (cannot be modified) in modes without selection of the number of shots.
*3 Not available, but switches to [Z] in some cases.
O
Available or set automatically. Not available.
*4 FE lock not available in [!] flash mode.
180
Shooting Mode
K
E
DBMG
I
Pt
E
Function
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
O
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
e
f
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
–
–
–
–
–
–
–
–
Tracking AF Subject Selection
–
–
–
–
–
–
–
O
No Information Display
Information Display
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
Available or set automatically. Not available.
181
FUNC. Menu
Shooting Mode
K
E
DBMG
I
Pt
E
Function
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
–
1
1
2
*
*
*
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
–
AUTO
–
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
100/200/400/800/1600/3200
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
3
–
–
–
–
–
–
–
–
–
–
*
O
–
*1 White balance is not available.
O
Available or set automatically. Not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
*3 [ ] is set with [f], AF lock, or [t].
182
Shooting Mode
K
E
D
B
M
G
I
P
t
E
Function
*1
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
–
O
O
–
O
O
–
O
O
–
O
–
O
–
O
O
–
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
–
O
–
O
O
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
–
O
O
–
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
–
–
*2
–
O
–
–
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
–
–
–
–
O
–
O
Available or set automatically. Not available.
*1 Only [ ] and [ ] are available.
183
4
Shooting Tab Menu
Shooting Mode
K
E
DBMG
I
Pt
E
Function
Face AiAF*1
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
O
O
O
–
O
–
O
–
O
O
O
O
–
O
O
O
O
O
–
O
–
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
Tracking AF
Center
–
O
O
O
O
–
–
–
–
–
–
–
O
O
O
O
O
O
O
Normal
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Small
Standard
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
Off
1.6x/2.0x
On
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Off
O
O
O
O
O
O
O
O
O
O
O
On
–
–
*3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
On
–
–
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
Off
O
O
On
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Off
O
O
Off
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
O
O
–
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
–
2x/4x
–
*1 Operation when no faces are detected varies by shooting mode.
*2 Available when the AF frame is set to [Center].
O
Available or set automatically. Not available.
*3 [On] when subject movement is detected in [
] mode.
184
Shooting Mode
K
E
DBMG
I
Pt
E
Function
On
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Off
O
O
O
O
O
O
O
O
Peaking
On/Off
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Level
Low/High
Color
Red/Blue/Yellow
Auto
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
Flash Mode
Manual
On
Red-Eye Corr.
Off
–
–
–
–
–
–
–
–
–
O
O
O
–
O
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
Red-Eye Lamp
Flash Exp. Comp
Flash Output
On/Off
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
On
Off
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
Safety FE
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Auto
O
O
O
O
O
O
O
O
O
–
O
–
O
–
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
On/Off
On
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Auto/Off
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
Available or set automatically. Not available.
185
Shooting Mode
K
E
DBMG
I
Pt
E
Function
Off/Quick
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Display Time
2 sec./4 sec./8 sec./Hold
Off
Display Info
Detailed
On
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
On/Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Off
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
IS Mode
Continuous
Shoot Only
1
2
–
O
O
O
O
O
O
O
–
O
O
O
O
Dynamic IS
O
O
Large/Medium/Small
Framing Assist – Auto
On/Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
Date/Date & Time
Include Stills/No Stills
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
On/Off
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
with some settings, but they will be recorded in the still images.
O
Available or set automatically. Not available.
186
3Set Up Tab Menu
1Playback Tab Menu
Item
Ref. Page
Item
File Numbering
Create Folder
Units
Ref. Page
Item
List/Play Digest Movies
Slideshow
Ref. Page
Item
Ref. Page
Mute
Resize
Volume
My Colors
Hints & Tips
Date/Time
Erase
Face ID Info
Transition Effect
Index Effect
Scroll Display
Group Images
Auto Rotate
Resume
Video System
Ctrl via HDMI
Wi-Fi Settings
Protect
Time Zone
Lens Retract
Rotate
Favorites
Mobile Device Connect
Button
Photobook Set-up
i-Contrast
Eco Mode
Power Saving
LCD Brightness
Start-up Image
Format
Red-Eye Correction
Cropping
Language
Reset All
2Print Tab Menu
Item
Ref. Page
Item
Select All Images
Clear All Selections
Print Settings
Ref. Page
–
Print
Select Images & Qty.
Select Range
187
Playback Mode FUNC. Menu
Handling Precautions
The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
Item
Ref. Page
Item
Play Movie
Ref. Page
•
•
Rotate
Protect
Favorites
Print
Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic fields, which may cause malfunction or
erase image data.
Smart Shuffle
Image Search
Slideshow
•
•
•
•
If water droplets or dirt adheres to the camera or screen, wipe with a dry
soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
Group Playback
Never use cleaners containing organic solvents to clean the camera or
screen.
Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to warm
environments), put the camera in an airtight, resealable plastic bag and
let it gradually adjust to the temperature before removing it from the bag.
•
•
If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove
the battery pack and memory card, and wait until the moisture has
evaporated before resuming use.
Before long-term battery storage, use up the battery pack’s remaining
charge, remove it from the camera, and store it in a plastic bag or similar
container. Storing a partially charged battery pack over extended periods
(about a year) may shorten its life or affect performance.
188
1 – 11 (PC2091/PC2093) or 1 – 13 (PC2047)
WEP, WPA-PSK (AES/TKIP),
WPA2-PSK (AES/TKIP)
Specifications
Supported Channels
Security
Camera Effective
Approx. 16.1 million pixels
Pixels (Max.)
30x zoom: 4.5 (W) – 135.0 (T) mm
(35mm film equivalent: 25 (W) – 750 (T) mm)
Lens Focal Length
Digital Zoom Focal Length (35mm equivalent)
7.5 cm (3.0 in.) color TFT LCD
Effective Pixels: Approx. 922,000 dots
Digital Zoom [Standard]
25 – 3000 mm
(Represents the combined focal length of optical and
digital zoom.)
LCD Monitor
File Format
Design rule for Camera File system, DPOF (version 1.1)
compliant
Digital Tele-Converter 1.6x 40.0 ‒ 1200.0 mm
Still Images: Exif 2.3 (JPEG)
Digital Tele-Converter 2.0x 50.0 ‒ 1500.0 mm
Data Type
Movies: MP4 (Video: MPEG-4 AVC/H.264; Audio: MPEG-4
AAC-LC (stereo))
Number of Shots/Recording Time, Playback Time
Hi-speed USB
HDMI output
Analog audio output (stereo)
Analog video output (NTSC/PAL)
Number of Shots
Eco Mode On
Movie Recording Time*1
Continuous
Shooting*2
Playback Time
Approx. 250
Interface
Approx. 360
Approx. 40 minutes
Battery Pack NB-6LH
AC Adapter Kit ACK-DC40
Power Source
Approx. 1 hour, 10 minutes
Dimensions (Based
on CIPA Guidelines)
Approx. 4 hours
112.7 x 65.8 x 34.8 mm (4.44 x 2.59 x 1.37 in.)
*1Time under default camera settings, when normal operations are performed, such as
shooting, pausing, turning the camera on and off, and zooming.
*2Time available when shooting the maximum movie length (until recording stops
automatically) repeatedly.
Approx. 269 g (approx. 9.49 oz.; including the battery pack
and memory card)
Approx. 245 g (approx. 8.64 oz.; camera body only)
Weight (Based on
CIPA Guidelines)
• The number of shots that can be taken is based on measurement guidelines of the
Camera & Imaging Products Association (CIPA).
Wi-Fi
• Under some shooting conditions, the number of shots and recording time may be less
than mentioned above.
IEEE 802.11b/g/n*
* 2.4 GHz band only
Standards
• Number of shots/time with a fully charged battery pack.
Transmission
Methods
OFDM modulation (IEEE 802.11g/n)
DSSS modulation (IEEE 802.11b)
Infrastructure mode*1, Ad hoc mode*2
*1 Supports Wi-Fi Protected Setup
*2 Wi-Fi Certified IBSS
Communication
Modes
189
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
Number of 4:3 Shots per Memory Card
recording time reaches approximately 29 minutes and 59 seconds when shooting in
Number of Shots per Memory Card
(Approx. shots)
[
], [
] or [
], or approximately 1 hour when shooting in [
].
Compression
Ratio
Recording Pixels
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
8 GB
32 GB
1058
4272
(Large)
16M/4608x3456
Flash Range
1705
1996
3069
4723
8469
27291
40937
6883
8059
50 cm – 3.5 m (1.6 – 11 ft.)
1.0 – 2.0 m (3.3 – 6.6 ft.)
Maximum wide angle (j)
(Medium 1)
8M/3264x2448
Maximum telephoto (i)
12391
19064
34184
(Medium 2)
3M/2048x1536
Shooting Range
Maximum Wide Angle Maximum Telephoto
Shooting Mode Focusing Range
(j)
1 cm (0.4 in.) – infinity 1.4 m (4.6 ft.) – infinity
1 m (3.3 ft.) – infinity 8 m (26 ft.) – infinity
(i)
110150
165225
(Small)
0.3M/640x480
–
–
• The values in the table are based on Canon measurement conditions and may
change depending on the subject, memory card and camera settings.
5 cm (2.0 in.) – infinity 1.4 m (4.6 ft.) – infinity
• The values in the table are based on 4:3 aspect ratio. The number of shots available
1 – 50 cm
–
Other modes
e*
(0.4 in. – 1.6 ft.)
1 cm (0.4 in.) – infinity 1.4 m (4.6 ft.) – infinity
f*
Recording Time per Memory Card
* Not available in some shooting modes.
Recording Time per Memory Card
Image Quality
8 GB
32 GB
Continuous Shooting Speed
30 min. 03 sec.
2 hr. 01 min. 27 sec.
Shooting Mode
Speed
43 min. 29 sec.*1
2 hr. 03 min. 55 sec.
5 hr. 14 min. 34 sec.
2 hr. 55 min. 43 sec.*2
8 hr. 20 min. 32 sec.
21 hr. 10 min. 38 sec.
G
Approx. 3.1 shots/sec.
*
Approx. 8.5 shots/sec.
* Up to four shots at once during continuous shooting
• The values in the table are based on Canon measurement conditions and may
change depending on the subject, memory card and camera settings.
190
Shutter Speed
Battery Pack NB-6LH
Type:
Rechargeable lithium-ion battery
[
] mode, automatically set range
1 – 1/3200 sec.
Nominal Voltage:
Nominal Capacity:
Charging Cycles:
3.7 V DC
1060 mAh
Approx. 300 times
15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2, 1.6, 1.3, 1,
0.8, 0.6, 0.5, 0.4, 0.3, 1/4, 1/5, 1/6, 1/8, 1/10,
1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60,
1/80, 1/100, 1/125, 1/160, 1/200, 1/250, 1/320,
1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250,
1/1600, 1/2000, 1/2500, 1/3200
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
Available values in [M] mode (sec.)
Dimensions:
Weight:
34.4 x 41.8 x 6.9 mm (1.35 x 1.65 x 0.27 in.)
Approx. 22 g (approx. 0.78 oz.)
Battery Charger CB-2LY/CB-2LYE
Aperture
Rated Input:
100 – 240 V AC (50/60 Hz), 0.085 A (100 V) – 0.05 A (240 V)
f/number
f/3.2 – f/8.0 (W), f/6.9 – f/8.0 (T)
Rated Output:
Charging Time:
Charge Indicator:
4.2 V DC, 0.7 A
f/3.2, f/3.5, f/4.0, f/4.5, f/5.0, f/5.6, f/6.3, f/6.9,
f/7.1, f/8.0
Approx. 2 hr. (when using NB-6LH)
Charging: orange / Fully charged: green
(two-indicator system)
Available values in [B] mode*
* Depending on the zoom position, some aperture values may not be available.
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
191
Editing
Cropping...................................... 107
Servo AF ....................................... 78
Focusing range
Index
i-Contrast..................................... 109
Red-eye correction...................... 109
Resizing images.......................... 106
Macro ............................................ 74
Manual focus................................. 74
Center (AF frame mode)...................... 76
Clock.................................................... 26
Color (white balance)........................... 72
Connecting via an access point......... 124
Connecting without an access point... 129
Continuous shooting............................ 79
A
AC adapter kit............................ 156, 159
Accessories ....................................... 156
AE lock ................................................ 70
AF lock................................................. 79
Aspect ratio.......................................... 46
AV cable ............................................ 159
Av (shooting mode) ............................. 85
Focus lock ........................................... 76
FUNC. menu
Editing or erasing connection
information......................................... 142
Basic operations............................ 23
Erasing .............................................. 101
Error messages ................................. 175
Exposure
G
Grid lines ............................................. 48
High-speed burst HQ
(shooting mode) ............................ 64
FE lock .......................................... 81
Creative Shot (shooting mode)............ 53
Eye-Fi cards .......................................... 2
H
B
Handheld nightscene
(shooting mode)................................... 56
F
→
Batteries
Date/time (date/time battery)
Face AiAF (AF frame mode)................ 76
Face self-timer (shooting mode).......... 63
Favorites............................................ 105
FE lock................................................. 81
File numbering................................... 151
Flash
Power saving................................. 21
HDMI cable........................................ 157
D
High-speed burst HQ
(shooting mode)................................... 64
Date/time
Battery pack
Adding date stamps ...................... 38
Changing....................................... 15
Date/time battery........................... 15
Settings ......................................... 14
World clock.................................. 147
Charging........................................ 12
Level............................................ 178
Power saving................................. 21
Household power............................... 159
I
Black and white images....................... 73
DC coupler......................................... 159
Image quality
→
Defaults
Reset all
Digital tele-converter............................ 75
Digital zoom......................................... 34
DPOF................................................. 167
Drive mode .......................................... 79
Flash exposure compensation ...... 81
On ................................................. 80
Slow synchro................................. 80
C
→
Compression ratio (image quality)
Images
Display period ............................... 51
Camera
Reset all ...................................... 152
Camera access point mode............... 129
Focusing
CameraWindow (computer)....... 121, 160
CameraWindow (smartphone)............119
AF frames...................................... 76
AF lock .......................................... 79
AF-point zoom............................... 49
MF peaking ................................... 75
→
Playback
Viewing
E
Image stabilization............................... 82
Eco mode .......................................... 148
192
Image Sync........................................ 139
Indicator............................................... 26
ISO speed............................................ 71
Self-timer ............................................. 37
P
T
2-second self-timer........................ 37
Customizing the self-timer............. 38
Face self-timer (shooting mode) ... 63
Wink self-timer (shooting mode) ... 62
Photobook set-up .............................. 169
PictBridge .................................. 156, 163
Tracking AF ......................................... 77
Traveling with the camera ................. 147
TV display.......................................... 157
Tv (shooting mode).............................. 85
L
→
Playback
Viewing
Sending images................................. 133
Sending images to a computer...........115
Sending images to another camera....116
Sending images to a printer................116
Sending images to a smartphone.......115
Sending images to Web services .......114
Sepia tone images............................... 73
Servo AF.............................................. 78
Shooting
Lamp.................................................... 50
Live View Control (shooting mode)...... 54
Low light (shooting mode) ................... 56
Poster effect (shooting mode) ............. 57
Power ................................................ 156
→
→
AC adapter kit
Battery pack
M
V
Macro (focusing range)........................ 74
Printing .............................................. 163
Protecting ............................................ 98
P (shooting mode) ............................... 69
Image search ................................ 93
Index display ................................. 93
Slideshow...................................... 96
TV display ................................... 157
Memory cards........................................ 2
Menu
→
Shooting date/time
Date/time
Shooting information ................... 178
Basic operations............................ 24
R
Smart Shutter (shooting mode) ........... 61
Smile (shooting mode)......................... 61
Snow (shooting mode)......................... 56
Soft focus (shooting mode).................. 60
Software
Remote shooting ............................... 141
Reset all............................................. 152
Metering method.................................. 70
Monochrome (shooting mode)............. 60
Movies
W
White balance (color)........................... 72
Widescreen (resolution)....................... 46
Wi-Fi functions....................................113
Wi-Fi menu ........................................ 123
Wink self-timer (shooting mode).......... 62
Saving images to a
computer ............................. 136, 161
Editing ..........................................110
Image quality (resolution/
frame rate)......................... 46, 48, 67
S
Screen
Sounds .............................................. 146
→
Wrist strap
Strap
Z
M (shooting mode)............................... 86
Multi-area White Balance .................... 47
My Colors .................................... 73, 108
Display language........................... 16
Icons.................................... 178, 179
Zoom ....................................... 17, 28, 34
Super slow motion movie
(movie mode)....................................... 66
→
Menu
FUNC. menu, Menu
SD/SDHC/SDXC memory cards
Super vivid (shooting mode)................ 57
→
Memory cards
Searching ............................................ 93
193
•
Be sure to make notes of the wireless LAN settings you use.
Wi-Fi (Wireless LAN) Precautions
The wireless LAN settings saved to this product may change or be
erased due to incorrect operation of the product, the effects of radio
waves or static electricity, or accident or malfunction. Be sure to make
notes of wireless LAN settings as a precaution. Please note that Canon
accepts no responsibility for direct or indirect damages or loss of
earnings resulting from a degradation or disappearance of content.
•
The camera’s model number is PC2091/
PC2093/PC2047. To identify your model,
check the label on the bottom of the camera
for a number beginning with PC. The built-in
WLAN module model is written below.
•
•
When transferring this product to another person, disposing of it, or
sending it for repair, be sure to note the wireless LAN settings and reset
the product to its default settings (erase settings) if necessary.
Country/Region of Purchase
U.S.A., Canada
Other
WLAN Module Model
Canon will not make compensation for damages resulting from loss or
theft of the product.
WM224
WM223
Canon accepts no responsibility for damages or loss resulting from
unauthorized access or use of target devices registered on this product
due to loss or theft of the product.
•
Countries and Regions Permitting WLAN Use
- Use of WLAN is restricted in some countries and regions, and illegal
use may be punishable under national or local regulations. To avoid
violating WLAN regulations, visit the Canon website to check where use
is allowed.
Note that Canon cannot be held liable for any problems arising from
WLAN use in other countries and regions.
•
•
Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product within the
guidelines noted in this guide. Canon accepts no responsibility for
damages or loss if the function and product are used in ways other than
as described in this guide.
•
•
Doing any of the following may incur legal penalties:
Do not use the wireless LAN function of this product near medical
equipment or other electronic equipment.
- Altering or modifying the product
- Removing the certification labels from the product
Use of the wireless LAN function near medical equipment or other
electronic equipment may affect operation of those devices.
According to foreign exchange and foreign trade law regulations, export
permission (or service transaction permission) from the Japanese
government is necessary to export strategic resources or services
(including this product) outside Japan.
•
Because this product includes American encryption software, it falls
under U.S. Export Administration Regulations, and cannot be exported to
or brought into a country under U.S. trade embargo.
194
•
Unauthorized network access
Radio Wave Interference Precautions
Third parties with malicious intent may gain unauthorized access to
the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access
such as impersonation (where someone assumes an identity to gain
access to unauthorized information) or springboard attacks (where
someone gains unauthorized access to your network as a springboard to
cover their tracks when infiltrating other systems).
•
This product may receive interference from other devices that emit radio
waves. To avoid interference, be sure to use this product as far away as
possible from such devices, or avoid using the devices at the same time
as this product.
To prevent these types of problems from occurring, be sure to thoroughly
secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security
settings.
This product is installed with the WLAN Module which is certified to standards set by
IDA Singapore.
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
The camera can print to PictBridge-compatible printers
via Wi-Fi. PictBridge technical standards make it easy
to connect digital cameras, printers, and other devices
directly. Additionally, a new standard called DPS over IP
enables PictBridge connections in network environments,
and the camera is also compatible with this standard.
•
Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays the
results on the screen. Networks you are not authorized to use (unknown
networks) may also be displayed. However, attempting to connect to or
using such networks could be regarded as unauthorized access. Be sure
to use only networks you are authorized to use, and do not attempt to
connect to other unknown networks.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
If security settings have not been properly set, the following problems may
occur.
•
Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and
attempt to acquire the data you are sending.
195
Trademarks and Licensing
Disclaimer
•
•
•
Unauthorized reproduction of this guide is prohibited.
•
Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
All measurements based on Canon testing standards.
Information subject to change without notice, as are product
•
Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
specifications and appearance.
•
•
Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
•
•
•
App Store, iPhone, and iPad are trademarks of Apple Inc.
The SDXC logo is a trademark of SD-3C, LLC.
The above items notwithstanding, Canon cannot be held liable for any
loss arising from the use of this product.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
•
•
The iFrame logo and the iFrame symbol are trademarks of Apple Inc.
Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
•
The N Mark is a trademark or registered trademark of NFC Forum, Inc.
in the United States and in other countries.
•
•
•
All other trademarks are the property of their respective owners.
This device incorporates exFAT technology licensed from Microsoft.
This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the
AT&T patents to provide MPEG-4 compliant video. No license is granted
or implied for any other use for MPEG-4 standard.
196
|