Camera User Guide
•
•
ake ead is guide, including the Safety
Precautre using the camera.
Reading thiguide will help you learn to use the camera
propey.
Sthis guide safely so that you can use it in the future.
ENGLISH
Read This First
Test Shots and Disclaimer
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or cmmercial properties by
means of a camera or other device may contrane copyright or other legal
rights even if the image was shot for persona.
Warranty Limitations
This camera’s warranty is ectiin the country of sale. If there is a
problem with the camera ad, lease return it to the country of sale
before proceedinwia waim to a Canon Customer Support Help
Desk. For CanoCustomer t contacts, please see the customer
support list suppd with our camera.
LCD Monitor (Screen)
•
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the
camera.
•
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
3
What Do You Want to Do?
Shoot
z Shoot, leaving it to the camera to make settings .........................23
Take good people shots
I
V
w
P
Portraits
(p. 64)
Kids and pets
(p. 65)
At the beach
(p. 65)
Against snow
(p. 66)
Shoot various other scenes
t
Fireworks
(p. 66)
J
O
Landscape
(p. 65)
Low Light
(p. 65)
Foliage
(p. 65)
Shoot with speial effect
Fish-eyeEffect
(p. 69)
Miniature Effect
Toy Camera Effect
(p. 71)
(p. 70)
Monochrome
(p. 72)
Super vivid colors
(p. 69)
Poster Effect
(p. 69)
z Shoot in Discreet mode................................................................68
z Adjust image settings when shooting (Live View Control) ...........67
z
Focus on faces..................................................................23, 64, 94
z Shoot in places where I cannot use the flash
(turn off the flash).........................................................................54
z Take pictures with me in them too (self-timer) .................58, 60, 76
z Insert the date and time into my shots .........................................57
4
What Do You Want to Do?
View
z Look at my pictures......................................................................26
1
z Easy playback (Easy Mode).........................................................28
z Automatically play back pictures (slideshow).............................112
z Look at my pictures on a TV ......................................................116
z Look at my pictures on a computer..............................................32
z Quickly search pictures......................................................110, 111
z Erase pictures ......................................................................27, 120
Shoot/View Movies
z Shoot movies ................................................................29
E
z View movies..................................................................31
Print
z Easily print ctures..................................................................132
Save
z Save images to a computer .........................................................32
Other
z Turn off sounds ............................................................................47
3
z Use the camera abroad........................................................37, 149
z Understand what is displayed on the screen .............................163
5
learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Table of Contents ..............................6
Conventions Used in This Guide .......9
Safety Precautions...........................10
Changing the Sound Settings ......... 47
Returning the Camera to Default
Power Saving Function
(Auto Power Down)....................... 51
Clock Functions............................... 51
1
Used Functions .................53
Compatible Memory Cards
(Sold Separately)...........................14
Turnithe lash Off ...................... 54
Inserting the Batteries and Memory
Card...............................................14
Setting the Display Language...
Viewing Images ........................26
Erasing Images........................27
Chging the Recording Pixel
Changing the Compression Ratio
Shooting or Viewing Images in
Easy Mode.....................................28
Shooting Movies ..............................29
Viewing Movies................................31
Shooting in Various Conditions....... 64
Easily Changing the Brightness
and Color When Shooting
Transferring Images to a Computer
for Viewing.....................................32
Accessories .....................................36
Adding Effects and Shooting
(Creative Filters) ........................... 68
2
Detecting a Face and Shooting
(Smart Shutter) ............................. 73
Components Guide..........................40
Screen Display.................................43
Indicators .........................................44
FUNC. Menu – Basic Operations ....45
MENU – Basic Operations...............46
Shooting Long Exposures............... 77
6
Table of Contents
5
Choosing Settings
Yourself..............................79
Shooting in Program AE ................. 80
Adjusting the Brightness
Shoot Movies That Look Like
Turning the Flash On ...................... 81
Adjusting the White Balance........... 82
Other Shooting Functions..............106
Editing ...........................................107
Correcting the Brightness and
Shooting (i-Contrast)..................... 84
Continuous Shooting....................... 85
7
Using Various Playback and
Changing the Tone of an Image
(My Colors) ................................... 86
Shooting Close-ups (Macro) ........... 87
Shooting Far Away Subjects
Changing the AF Frame Mo88
Choosing the Subject to Fo
Tagging Images as Favorites........122
Choosing the Person to Focus On
(Face Select) ................................ 94
Changing the Metering Method....... 95
Shooting with the AE Lock.............. 96
Shooting with the FE Lock .............. 96
Shooting with Slow Synchro ........... 97
Red-Eye Correction ........................ 98
Checking for Shut Eyes .................. 99
Shooting Using the Viewfinder...... 100
Organizing Images by Category
Rotating Images ............................125
Resizing Images............................126
Trimming .......................................127
Correcting the Brightness
(i-Contrast) ..................................129
Shooting Using a TV as
the Display.................................. 100
Correcting the Red-Eye Effect.......130
7
Table of Contents
8
10 Useful Information ..........155
Printing Images..............................132
Replacing the Date/Time Battery .. 156
Troubleshooting ............................ 158
Choosing Images for Printing
(DPOF) ........................................139
List of Messages That Appear
on the Screen.............................. 161
9
Customizing Camera
Settings............................143
Information Displayed
on the Screen.............................. 163
Changing Camera Settings............144
Changing Shooting Function
Settings........................................151
Handling Precautions.................... 167
Functions Available in
Each Shooting Mode................... 168
Changing Playback Function
Settings........................................154
Menus .......................................... 172
Specifcatis................................ 178
Index ..................................... 181
8
Conventions Used in This Guide
•
•
•
Icons are used in the text to represent the camera buttons and dials.
Language that displays on the screen appears inside [ ] (square brackets).
The directional buttons and FUNC./SET button are represented by the
following icons.
Up button
Left button
FUNC./SET button
Right button
Down button
•
•
•
•
•
•
•
: Things you should be careful about
: Troubleshooting tips
: Hints for getting more out of your camer
: Supplemental information
(p. xx): Reference pages (“xx” staor a pe number)
This guide assumes all functions heir deult settings.
The various types of mecardat can be used in this camera are
collectively referred to y cds in this guide.
9
Safety Precautions
• Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you
use.
Denotes the possibility of serious injury or death.
Warning
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular,
remain at least one meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Time/date battery: Dangerous if swallowed. If this occurs, ntact a doctor immediately.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat e product.
• Avoid dropping or subjecting the prodvere iacts.
• To avoid the risk of injury, do not touch rior of tproduct if it has been
dropped or otherwise damaged
• Stop using the product immet ems smoke, a strange smell, or
otherwise behaves abnormal
• Do not use organic olvets sohol, benzine, or thinner to clean the
equipment.
• Do not let the prodt come into contact with water (e.g. sea water) or other
liquids.
• Do not allow liquids or n objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the batteries.
• Do not use the camera’s viewfinder in the presence of strong light sources (such
as the sun on a clear day).
This could damage your eyesight.
• Use only the recommended batteries.
• Do not place the batteries near or in direct flame.
The batteries may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery acid
contacts eyes, mouth, skin or clothing, immediately flush with water.
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the operation of
electronic instruments and other devices. Exercise adequate caution when using the
camera in places where use of electronic devices is restricted, such as inside airplanes
and medical facilities.
10
Safety Precautions
• Do not play the supplied CD-ROM(s) in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of
a CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio
CD player (music player) could damage the speakers.
Denotes the possibility of injury.
Caution
• Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
• Avoid using, placing or storing the product ihollowing places:
-
-
-
Places subject to strong sunlight
Places subject to temperatures abo104 °F)
Humid or dusty areas
These could cause leakage, ong oexplosion of the batteries, resulting in
electrical shock, fire, burns or es.
• The slideshow tnsion ecause discomfort when viewed for
prolonged peris.
enes the possibility of damage to the equipment.
Caution
• Do not aim the camera at bright light sources (such as the sun on a clear day).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful not to allow
dust or sand to enter the camera.
This may cause the product to malfunction.
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
• Remove and store the batteries when you are not using the camera.
If the batteries are left inside the camera, damage caused by leakage may occur.
• Before you discard the batteries, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to fire or explosions.
11
Safety Precautions
• Do not charge batteries of different types at the same time, or use older batteries
together with newer batteries.
• Do not insert the batteries with the + and – terminals reversed.
This may cause the product to malfunction.
• Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the screen.
• Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
12
Getting Started
This chapter explains preparations before shooting, how to shoot in
A mode, and then how to view and erase the images you take. The
latter part of this chapter explains how to soot and view images in
Easy mode, how to shoot and view moviend how to transfer images
to a computer.
Attaching the Strap/the Camera
•
Attach the incded strap ap it around your wrist to avoid dropping
the camera dung use.
•
Keep your arms ht aainst your body while holding the camera firmly by
the sides when shooting. Be sure that your fingers do not block the flash.
Strap
13
Compatible Memory Cards (Sold Separately)
The cards below can be used without restrictions on their capacities.
•
•
•
•
•
•
*
SD memory cards*
SDHC memory cards*
SDXC memory cards*
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
This memory card complies with the SD standards. Some cards may not operate
properly depending on the brand of card used.
Depending on your computer’s OS version, SDXC memory cards may not
be recognized even when using a commercially available card reader.
Check to make sure that your OS supports SDXC memory cards
beforehand.
Inserting the Batteriend Memory Card
Insert the included batteries anmemard (sold separately).
the card’s write-protect tab.
z e memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
z Slide and hold the cover lock ( ), then
slide and open the cover ( ) as shown.
14
Inserting the Batteries and Memory Card
Insert the batteries.
z Insert the batteries with (+) and (-) ends
oriented correctly.
Insert the memory card.
z Insert the memory card as shown until it
locks into place with a click.
z Be sure the memory card is oriented
correctly. Inserting the memory card in the
wrong directicould damage the camera.
Label
Cle cov.
Clothe cover ( ), and press downward
s yoslide it until it clicks into place ( ).
What if [Memory card locked] appears on the screen?
SD, SDHC and SDXC memory cards have a write-protect tab. If this tab is in the
locked position, [Memory card locked] will appear on the screen and you will not
be able to take or erase images.
Removing the Memory Card
z Push the memory card in until you hear a
click, then slowly release it.
X The memory card will pop up.
15
Inserting the Batteries and Memory Card
Number of Possible Shots
Alkaline Batteries
NiMH Batteries
(Sold Separately)
Power Source
(Supplied)
Approx. 200
Approx. 650
Approx. 8 hours
LCD Monitor On*
LCD Monitor Off
Approx. 450
Approx. 1100
Number of
Shots
Approx. 11 hours
Playback Time
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
• Depending on the brand of alkaline batteries used, the number of shots that can be
taken may vary widely.
• The values for NiMH batteries are based on fully charged batteries.
Compatible Batteries
AA alkaline batteries and Canon AA NiMatterieold separately) (p. 37).
Can any other batteriebe u
We cannot recommend the usher atteries than those listed above
because performancvars w
Why use NiH batteries?
NiMH batteries last mucloner than alkaline batteries, especially in cold
weather.
Battery Charge Indicator
When battery charge is low, an icon and message will appear. If the batteries
are charged, the icon and message will not appear.
Display
Summary
Nearly depleted. Ready new batteries.
Depleted. Change the batteries.
“Change the batteries”
Number of Shots per Memory Card
Memory Card
4 GB
16 GB
Approx. 1231
Approx. 5042
Number of Shots
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
16
Inserting the Batteries and Memory Card
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Shooting mode (p. 23).
Number of shots that
can be taken
17
Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
z Press the power button.
X The Date/Time screen will appear.
Set the date and time.
z Press the qr buttons to choose an option.
z Press the op buttons to set a value.
Complete the setting.
z Press the m button.
X Once the date and time have been set, the
Date/Time screen will close.
z Pressing the power button will turn off the
camera.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/Time
screen will appear each time you turn on the camera.
Daylight saving time settings
If you choose
the time to daylight saving (1 hour ahead).
in Step 2 and press the op buttons to choose
, you will set
18
Setting the Date and Time
Changing the Date and Time
You can change the current date and time settings.
Display the menu.
z Press the n button.
Choose [Date/Time] from the 3
tab.
z Move the zoom lever to choose the 3 tab.
z Press the obuttons to choose
[Date/Tie], en press the m button.
Change the date and time.
z Follow Steps 2 and 3 on p. 18 to adjust the
setting.
z Press the n button to close the menu.
Date/Time battery
If the Date/Time screen appears even when the date/time have been correctly set,
insert a new date/time battery (p. 156).
19
Setting the Display Language
You can change the language that displays on the screen.
Enter Playback mode.
z Press the 1 button.
Display the settings screen.
z Press and hold the m button, then
immediately press the n button.
Set the display anguage.
z Press the oqbuttons to choose a
languthen pss the m button.
X Oncsplay laguage has been set,
e ses screen will close.
What if the clock appears when the m button is pressed?
The clock will appear if too much time passes between pressing the m button
and the n button in Step 2. If the clock appears, press the m button to
remove the clock and repeat Step 2.
You can also change the display language by pressing the n button
to choose [Language] from the 3 tab.
20
Formatting Memory Cards
Before you use a new memory card or one that has been formatted in other
devices, you should format the card with this camera.
Formatting (initializing) a memory card erases all data on the memory card.
As you cannot retrieve the erased data, exercise adequate caution before
formatting the memory card.
Display the menu.
z Press the n button.
Choose [Format].
z Move the zom lever to choose the 3 tab.
z Press thop buttons to choose [Format],
theess thm button.
Choose [OK].
z Press the qr buttons to choose [OK], then
press the m button.
Format the memory card.
z Press the op buttons to choose [OK],
then press the m button.
X The memory card will be formatted.
21
Pressing the Shutter Button
Complete formatting.
X When formatting ends, [Memory card
formatting complete] will appear on the
screen.
z Press the m button.
Formatting or erasing data on a memory card merely changes the file
completely erased. Be careful when transferring or disposing of a memory
card. When disposing of a memory card, take precautions such as
physically destroying the card to prevent personal information leaks.
• The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory cd.
• Perform a low-level format (p. 145) of the emry card when the camera
does not operate properly, the recog/readspeed of a memory card
has dropped, when continuous speed ows down, or when
movie recording stops suddenly.
Pressing the ShButton
To take images that re in focus, be sure to first press the shutter button
lightly (halfway) to focs, thepress fully to shoot.
Press halfway (Press lightly to focus).
z Press lightly until the camera beeps twice
and AF frames appear where the camera
focused.
Press fully (Press fully to shoot).
X The camera plays the shutter sound and
takes the shot.
If you shoot without pressing the shutter button halfway, the image may not
be in focus.
22
Taking Pictures (Smart Auto)
Since the camera can determine the subject and shooting conditions, you can
let it automatically select the best settings for the scene and just shoot. The
camera can also detect and focus on faces, setting the color and brightness
to optimal levels.
Turn on the camera.
z Press the power button.
X The start-up screen will appear.
Enter A mode.
z Set the mode dial to A.
z When you pot the camera toward the
subject, e cmera will make a slight
noias it drmines the scene.
X for thdetermined scene will
apn the uper right of the screen.
The amera will focus on detected
bjes and display frames on them.
Compose the shot.
z Moving the zoom lever toward i
(telephoto) will zoom in on your subject,
making it appear larger. Moving the lever
toward j (wide angle) will zoom out from
your subject, making it appear smaller.
(The zoom bar showing the zoom position
appears on the screen.)
Focus.
z Press the shutter button halfway to focus.
23
Taking Pictures (Smart Auto)
X When the camera focuses, it will beep
twice and AF frames will appear where the
camera focused.
Several AF frames will appear when the
camera focuses on more than one point.
AF Frame
Shoot.
z Press the shutter button fully to shoot.
X The camera will play the shutter sound and
shoot. The flash will automatically fire in
low light conditios.
X The image waear on the screen for
apprely twseconds.
z You e a secd picture even while
er btton again.
What if...
• What if the color abrigness of the images do not turn out as
expected?
The scene icon (p. 164) that appears on the screen may not match the actual
scene. If this happens, try shooting in G mode (p. 79).
• What if the screen is off even when the camera is turned on?
Press the l button to turn on the screen.
• What if white and gray frames appear when you point the camera toward
a subject?
A white frame appears on the face or subject that the camera detected as the
main subject, while gray frames appear on other detected faces. The frames will
follow the subjects within a certain range (p. 88).
If the subject moves, however, the gray frames will disappear, leaving only the
white frame.
• What if a frame does not appear on the subject you want to shoot?
The subject may not be detected, and frames may appear on the background.
If this happens, try shooting in G mode (p. 79).
24
Taking Pictures (Smart Auto)
• What if a blue frame appears when you press the shutter button halfway?
A blue frame appears when a moving subject is detected; the focus and
exposure will continuously adjust (Servo AF).
• What if a flashing
appears?
Attach the camera to a tripod so that the camera does not move and blur the
image.
• What if the camera does not play any sounds?
Pressing the l button while turning on the camera power will turn off all
sounds. To turn the sounds on, press the n button to choose [Mute] from
the 3 tab, then press the qr buttons to choose [Off].
• What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. The effective flash range is
approximately 30 cm – 4.0 m (12 in. – 13 ft.) at maximum wide angle (j), and
approximately 50 cm – 2.0 m (1.6 – 6.6 ft.) at mimum telephoto (i).
• What if the camera beeps once when the shuer button is pressed
halfway?
Your subject may be too close. Whamera at maximum wide angle
(j), move about 3 cm (1.2 in.) or ay from our subject and shoot.
Move about 80 cm (2.6 ft.re awhen the camera is at maximum
telephoto (i).
• What if the lamlhts hutter button is pressed halfway?
To reduce redye and to aocusing, the lamp may light when shooting
in dark areas.
• What if the screturnoff when you try to shoot?
When flash rechargibegins, the screen turns off. The screen turns on again
when recharging ends.
What if an icon appears in the upper right of the screen?
The icon for the determined scene will appear in the upper right of the screen. For
details on the icons that appear, see “Scene Icons” (p. 164).
Choosing the subject to focus on (Tracking AF)
After pressing the o button and displaying
, point the camera so that
is
on the subject you want to focus on. Press and hold the shutter button halfway to
display a blue frame where focus and exposure will be maintained (Servo AF).
Press the shutter button fully to shoot.
25
Viewing Images
You can view the images you have taken on the screen.
Enter Playback mode.
z Press the 1 button.
X The last image you took will appear.
Choose an image.
z Pressing the q button will cycle through
the images from newest to oldest.
z Pressing the r button will cycle through
the images from oldest to newest.
z Pressing and hoing the qr buttons will
display imagiline letting you quickly
searcm. Preing the m button
restgle imae playback (p. 110).
e leill retract after approximately 1
te apses.
ing the 1 button again while the
is retracted will turn off the power.
Switching to hoong mode
Pressing the shutter button halfway, or turning the mode dial in Playback mode
switches the camera to Shooting mode.
26
Erasing Images
You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Enter Playback mode.
z Press the 1 button.
X The last image you took will appear.
Choose an image to erase.
z Press the qr buttons to display an image
to erase.
Erase the image.
z Press the p button.
X [Erase?] appears on the screen.
z Press the qr buttons to choose [Erase],
then press the m button.
X The displayed image will be erased.
z To exit instead of erasing, press the qr
buttons to choose [Cancel], then press the
m button.
27
Shooting or Viewing Images in Easy Mode
In Easy mode, operational instructions are displayed on the screen, and the
camera is set so that only the buttons and the zoom lever explained on this
page are functional. This prevents incorrect operation of the camera, allowing
even beginners to take worry-free pictures.
Shooting
z Set the mode dial to 9.
z Follow Steps 3 – 5 on pp. 23 – 24 to shoot
(no sound will play).
z Press the r button to turn off the flash. !
will appear on the screen. Pressing the r
button again turns on the flash and
appears on the reen. The flash will
automaticalfire n low light conditions.
Viewing
z Press the 1 button, then press the qr
buttons to switch images.
z Press the 1 button, then press the m
button, and all the shots you have taken
will display for about 3 seconds each.
Press the m button again to stop the
slideshow.
z To erase images, follow the steps on p. 27.
28
Shooting Movies
The camera can automatically select all settings so that you can shoot movies
just by pressing the shutter button.
Enter E mode.
z Set the mode dial to E.
Remaining Time
mpose the shot.
oving the zoom lever toward i will
oom in on your subject, making it appear
larger. Moving the lever toward j will
zoom out from your subject, making it
appear smaller.
Focus.
z Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice.
Shoot.
z Press the shutter button fully.
29
Shooting Movies
X Recording will start, and [ Rec] and the
elapsed time will appear on the screen.
z Once shooting begins, take your finger off
the shutter button.
Elapsed Time
z If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
z Do not touch the microphone while
shooting.
z Do not press any buttons other than the
shutter button whle shooting. The sound
the buttons makwill be recorded in the
movie.
Microphone
Stop sing.
s thshutter button fully again.
amera will beep once and stop
ting the movie.
X The movie will record to the memory card.
X Shooting will automatically stop when the
memory card fills.
Zooming while shooting
Pressing the zoom lever while shooting will zoom in on or out from the subject.
However, movies shot at zoom factors that appear in blue will be coarse.
Operation sounds will be recorded.
Shooting Time
Memory Card
Shooting Time
4 GB
16 GB
Approx. 26 min. 48 sec.
Approx. 1 hr. 49 min. 48 sec.
• Shooting times are based on default settings.
• Maximum clip length is approx. 10 minutes.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
30
Viewing Movies
You can view the movies you have shot on the screen.
Enter Playback mode.
z Press the 1 button.
X The last image you took will appear.
X
appears on movies.
Choose a movie.
z Press the qr buttons to choose a movie,
then press the m button.
z The movie control panel will appear.
y the movie.
z Press the qr buttons to choose
(Play), then press the m button.
X The movie will play.
z If you press the m button, you can pause
or resume playback.
z Press the op buttons to adjust the
volume.
X After the movie finishes,
appears.
How can I play back movies on a computer?
Install the included software (p. 33).
• When watching a movie on a computer, frames may drop, it may not play
smoothly, and the audio may stop suddenly depending on the computer’s
capabilities.
• If you use the supplied software to copy the movie back onto the memory card,
you can play back the movie smoothly with the camera. For enhanced playback
you can also connect the camera to a TV.
31
Transferring Images to a Computer for Viewing
You can use the included software to transfer images you have shot with the
camera to a computer for viewing. If you are already using software included
with another Canon-brand compact digital camera, install the software from
the included CD-ROM, overwriting your current installation.
System Requirements
Windows
Windows 7
OS
Windows Vista Service Pack 1 and 2
Windows XP Service Pack 3
The above OS should be pre-installed on computers with built-in
USB ports.
Computer model
CPU
Pentium 1.3 GHz or higher (still images), Core2 Duo 1.66 GHz or
higher (movies)
Windows 7 (64 bit): 2 GB or me
RAM
Windows 7 (32 bit), Windows Vistbit, 32 bit): 1 GB or more
Windows XP: 512 MB still imes), 1 GB or more (movies)
Interface
USB
Free Hard Disk
Space
ZoomBrows00 Mr more
CameraWiMB more*
MUploTub30 MB or more
hotoStitch: more
Display
24 x 768 pixels or higher
*
For Windows XP, Micrft .NT Framework 3.0 or later (max. 500 MB) must be
installed. Installation may take some time depending on your computer’s capabilities.
Macintosh
Mac OS X (v10.5 – v10.6)
OS
Computer model
The above OS should be pre-installed on computers with built-in
USB ports.
Intel Processor (still images), Core Duo 1.66 GHz or higher
(movies)
CPU
RAM
Mac OS X v10.6: 1 GB or more
Mac OS X v10.5: 512 MB or more (still images), 1 GB or more
(movies)
Interface
USB
Free Hard Disk
Space
ImageBrowser: 250 MB or more
CameraWindow: 150 MB or more
Movie Uploader for YouTube: 30 MB or more
PhotoStitch: 50 MB or more
Display
1,024 x 768 pixels or higher
32
Transferring Images to a Computer for Viewing
Preparations
Windows Vista and Mac OS X (v10.5) are used for these explanations.
Install the Software.
Windows
Place the CD in the computer’s CD-
ROM drive.
z Place the supplied CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.
Begin installaon.
z Click [Ey Itallation] and follow the
on-screen iuctions to proceed with the
on.
z If ser Accont Control] window
apprs, follow the on-screen instructions
preed.
n the installation finishes, click
[Restart] or [Finish].
Remove the CD-ROM.
z Remove the CD-ROM when your desktop
screen appears.
Macintosh
Place the CD in the computer’s CD-
ROM drive.
z Place the supplied CD-ROM (DIGITAL
CAMERA Solution Disk) (p. 2) into the
computer’s CD-ROM drive.
Begin installation.
z Double-click the
on the CD.
z Click [Install], and follow the on-screen
instructions to proceed with the
installation.
33
Transferring Images to a Computer for Viewing
Connect the camera to the
computer.
z Turn off the camera.
z Open the cover and insert the included
interface cable’s smaller plug (p. 2) firmly
into the camera terminal in the direction
shown.
z Insert the interface cable’s larger plug into
the computer. For connection details, refer
to the user guide provided with the
computer.
Turn on the caera.
z Press the 1 tn to turn on the camera.
Open raWidow.
W
[Downloads Images From Canon
era using Canon CameraWindow].
X CameraWindow will appear.
z If CameraWindow does not appear, click
the [Start] menu and choose [All
Programs], followed by [Canon Utilities],
[CameraWindow] and [CameraWindow].
Macintosh
X CameraWindow will appear when you
establish a connection between the
camera and computer.
z If CameraWindow does not appear, click
the CameraWindow icon on the Dock (the
bar which appears at the bottom of the
desktop).
34
Transferring Images to a Computer for Viewing
For Windows 7, use the following steps to display CameraWindow.
Click
on the task bar.
In the screen that appears, click the
link to modify the program.
Choose [Downloads Images From Canon Camera using Canon
CameraWindow] and click [OK].
Double click
.
Transfer and View Images
z Click [Import Images from Camera], and
then click [Import Untransferred Images].
X All images not previously transferred will
transfer to the computer. Transferred
images will bsorted by date and saved in
separate lds in the Pictures folder.
z CCamerWindow when image
ts comte.
z Tuf the camera and unplug the cable.
or tails on how to view images using a
mputer, refer to the Software Guide.
You can trnsfer images en without using the image transfer function in
the includeoftwaby simply connecting your camera to a computer.
There are, hothe following limitations.
• It may take a few minutes from when you connect the camera to the
computer until you can transfer images.
• Images shot in the vertical orientation may be transferred in the horizontal
orientation.
• Protection settings for images may be lost when transferred to a
computer.
• There may be problems transferring images or image information
correctly depending on the version of the operating system in use, the file
size, or the software in use.
• Some functions in the included software may not be available, such as
editing movies, and transferring images to the camera.
35
Separately Sold Accessories
The following camera accessories are sold separately. Some accessories are
not sold in some regions, or may no longer be available.
Power Supplies
AC Adapter Kit ACK800
z This kit lets you power the camera using
household power. Recommended for
powering the camera for an extended
period of time or when connecting to a
computer or printer. Cannot be used to
charge the camera batteries.
Battery and Charger Kit CBK4-300
z This dedicatebattery charger kit includes
both Batty harger CB-5AH and four
NH rechgeable AA NiMH (nickel
dride) tteries. Recommended
for ering the camera for an extended
eriof time.
You can ao purchasattery NB4-300, a set of four rechargeable
AA NiMH tteries separBattery and Charger Kit CBK4-200 can also
be used.
Using Accessories Abroad
The battery charger and the AC adapter kit can be used in regions that have 100 –
240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use electrical transformers for foreign travel as they will cause damage.
Flash
High-Power Flash HF-DC1
z This externally mounted flash can be used
to capture photographic subjects that are
too distant for the built-in flash to
illuminate.
37
Separately Sold Accessories
Other Accessories
AV Cable AVC-DC300
z Use this cable to connect to a TV for
shooting and viewing images.
Printers
Canon-Brand PictBridge Compliant
Printers
z By connecting your camera to a Canon-
brand PictBridge compliant printer, you
can print your imges without having to
use a comput
For forman, visit your nearest
Canoer.
SELPHY series
PIXMA series
Use of genuine Canoaccesries is recommended.
This product is designed to eve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
38
Components Guide
Viewfinder
Microphone (p. 30)
Lens
Mode Dial
Zoom Lever
p (pp. , 60, 76, 151)
h (pp. 541, 97)
GITAL Terminal (pp. 34, 132)
V OUT (Audio/Video Output)
Tminal (p. 116)
Shooting: i (Telehoto) / j (
Angle) (pp. 23, 29, 5)
Playback: k (Magni) / g (dex)
(pp. 110, 114)
Shutter Button (p. 22)
Power Button (p. 18)
DC IN (Power Input) Terminal (p. 157)
Tripod Socket
Cover Lock (p. 14)
Memory Card / Battery Cover (p. 14)
Strap Mount ( p. 13)
40
Components Guide
Mode Dial
Use the mode dial to change the Shooting mode.
P Mode
Choose settings yourself to take
various types of pictures (p. 80).
Movie Mode
For shooting movies
(pp. 29, 101).
Live View Control Mode
The brightness and color can be
easily set to your preferences for
shooting (p. 67).
You can use the largest
possible portion of the
screen to shoot movies
(p. 104).
Auto Mode
You can leave it to the camera
to select settings for fully
automatic shooting (p. 23).
Discreet Mode
disabled and all camera
sounds muted (p. 68).
Easy Mode
You can shoot just by pressing
Crtive Filters Mode
the shutter button (p. 28).
You can add various
effects to images when
shooting (p. 68).
Special Scene M
You can witm
settingor the scen
If you turn thmode ial while in Playback mode, the camera will switch to
Shooting mode.
41
Components Guide
Screen (LCD Monitor)
(pp. 43, 163, 165)
Speaker
Viewfinder
Indicators (p. 44)
0 (Face Selector) Button (p.
1 (Playback) Button . 26,
l (Display) Bun (p. 43)
n Button (p. 4
d (Ju111) / o Button
Macro) 87) / q Button
UNC./SButton (p. 45)
Flash) (pp. 54, 81, 97) / r Button
(Self-Timer) (pp. 58, 59, 60) /
a Single Image Erase) (p. 27) /
p Button
42
Screen Display
Switching the Display
You can change the screen display using the l button. Refer to p. 163
for details on information that appears on the screen.
Shooting
No Information Display
Off
Information Display
Playback
No Information
Display
SimpInformation DetailedInformation
isplay Display
Focus Check
Display (p. 113)
You can also switch the display by pressing the l button while the
image displays right after shooting. However, Simple Information Display is
not available. You can change the display that appears first by pressing the
n button, then choosing [Review info] from the 4 tab (p. 152).
43
Indicators
Screen Display in Dark Shooting Conditions
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
recorded may be different. Screen noise may appear and the movement of
the subject may appear somewhat jagged on the screen. This has no effect
on the recorded image.
Overexposure Warning during Playback
In Detailed Information Display (p. 43), overexposed areas of the image flash
on the screen.
Histogram during Playback
z The graph that apears in Detailed
Information spy (p. 165) is called the
histogr. The ogram shows the
distof brigness in an image
horizand the amount of brightness
ticalWhen the graph approaches the
aches the left side, the image is dark,
in this way you can judge the
exposure.
High
Low
Dark
Bright
Indicators
The indicators on the back of the camera (p. 42) will light or blink depending
on the camera’s status.
Colors Status
Operation Status
Lights Camera ready, display off (p. 149)
Green
During camera start-up, recording/reading/transmitting image data,
proximity warning (p. 25), cannot focus (flash will not fire) (p. 159)
Blinks
Lights Camera ready (flash will fire)
Orange
Blinks Proximity warning (p. 25), cannot focus (flash will fire) (p. 159)
When the indicator blinks green, do not turn off the power, open the
memory card slot/battery cover, shake or jolt the camera. These actions
may corrupt the image data or cause the camera or memory card to
malfunction.
44
FUNC. Menu – Basic Operations
You can set commonly used shooting functions using the FUNC. menu.
The menu items and options differ depending on the Shooting mode (pp. 168
– 171).
Display the FUNC. menu.
z Press the m button.
Choose a menu item.
z Press the op buttons to choose a menu
item.
X The availabloptions for the menu item
appear ihe wer part of the screen.
z Ching somenu items changes the
o displfurther menu options.
Available Options
hoe an option.
Menu Items
ess he qr buttons to choose an option.
ou can also choose settings by pressing
the l button on options that display
.
Complete the setting.
z Press the m button.
X The shooting screen will reappear and the
setting you chose will display on the
screen.
45
MENU – Basic Operations
Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The options differ
depending on the Shooting mode and the Playback mode (pp. 172 – 177).
Display the menu.
z Press the n button.
Choose a tab.
z Move the zoom lever or press the qr
buttons to choose a tab.
Choose an item
z Press op ons to choose an item.
z Somrequirou to press the m or
r butdisplay a submenu in which
chage the setting.
Choose an option.
z Press the qr buttons to choose an option.
Complete the setting.
z Press the n button to restore the
normal screen.
46
Changing the Sound Settings
You can silence or adjust the volume of camera sounds.
Muting Sounds
Display the menu.
z Press the n button.
Choose [Mute].
z Move the zoom lever to choose the 3 tab.
z Press the op buttons to choose [Mute],
then press the qr buttons to choose [On].
z Press the n button to restore the
normal scr
• You cannchangthe sound settings in
.
• You can also camera sounds by holding down the l button and
turning on the power.
• If you mute camera sounds, the sound will also be muted when playing
back movies (p. 31). If you press the o button while playing back a
movie, the sound will play back, and you can adjust the volume with the
op buttons.
47
Changing the Sound Settings
Adjusting the Volume
Display the menu.
z Press the n button.
Choose [Volume].
z Move the zoom lever to choose the 3 tab.
z Press the op buttons to choose
[Volume], then press the m button.
e the volume.
z Press the op buttons to choose an item,
then press the qr buttons to adjust the
volume.
z Press the n button twice to restore
the normal screen.
48
Adjusting the Screen Brightness
You can adjust the brightness of the screen.
Display the menu.
z Press the n button.
Choose [LCD Brightness].
z Move the zoom lever to choose the 3 tab.
z Press the op buttons to choose [LCD
Brightness].
Adjust the bightness.
z Press thqr uttons to adjust the
bress.
z e n button twice to restore
the mal screen.
49
Returning the Camera to Default Settings
When you have mistakenly changed a setting, you can reset the camera to
the default settings.
Display the menu.
z Press the n button.
Choose [Reset All].
z Move the zoom lever to choose the 3 tab.
z Press the op buttons to choose [Reset
All], then press the m button.
Reset the settings.
z Press the qr buttons to choose [OK], then
press the m button.
settings.
• The [Date/Time] (p. 19), [Language] (p. 20), [Video System] (p. 116), [Time
Zone] (p. 149), and the image registered in [Start-up Image] (p. 146) in the 3
tab.
• The recorded custom white balance data (p. 82).
• The shooting mode chosen in K (p. 64) or
(p. 68).
• The Movie mode (p. 29).
50
Power Saving Function (Auto Power Down)
To save battery power, the screen turns off, and the camera shuts down
automatically when it is not operated for a certain time.
Power Saving during Shooting
The screen will turn off approximately 1 minute after you stop operating the
camera. After about 2 more minutes, the lens will retract and the power will
turn off. When the screen has turned off but the lens has not yet retracted,
can continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after you stop operating the
camera.
• You can turn off the power saving functiop. 148).
• You can adjust the time before the scrn rns off (p. 149).
Clock Functions
You can check the curren
Press and hold the m button.
X The current time appears.
z If you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the qr buttons to
change the display color.
z Press the m button again to cancel the
clock display.
When the camera power is off, press and hold the m button, then press
the power button to display the clock.
51
52
Shooting with Commonly
Used Functions
This chapter explains how to use common unctions, such as the self-
timer, and how to turn off the flash.
•
This chapter assumes that the camera is set to A mode. When shooting
in another mode, check which functions are available in that mode (pp. 168
– 171).
53
Turning the Flash Off
You can shoot with the flash turned off.
Press the r button.
Choose !.
z Press the qr buttons to choose !, then
press the m button.
X Once set, ! will appear on the screen.
z To turn the flash back on, follow the steps
above to choose
.
What if a flhing
ars?
When you press the stter bton halfway in low light conditions where camera
shake is likely, a flashing will appear on the screen. Attach the camera to a
tripod to prevent it from moving.
54
Zooming in More Closely on Subjects
(Digital Zoom)
You can use the digital zoom to zoom up to approximately 16x maximum, and
capture subjects that are too far away for the optical zoom to enlarge.
However, depending on the recording pixel setting (p. 61) and zoom factor,
the images may appear coarse (the zoom factor will appear in blue).
Move the zoom lever toward i.
z Hold the lever until zooming stops.
X Zooming stops at the largest possible
zoom factor without image deterioration.
The zoom factor will appear on the screen
when you release the zoom lever.
Zoom Factor
Move it twad i again.
X Tital zom will zoom in even further
oubject.
Turning off tdigital zoom
To turn off the digital zoom, press the n button to choose [Digital Zoom] from
the 4 tab, then choose [Off].
The focal length when using the optical zoom and digital zoom together is
approximately 28 – 448 mm, and 28 – 112 mm when using the optical
zoom alone (all focal lengths are 35mm film equivalent).
55
Zooming in More Closely on Subjects (Digital Zoom)
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.5x or
approximately 2.0x. This enables a faster shutter speed and less chance of
camera shake than the zoom (including digital zoom) used by itself at the
same zoom factor.
However, a recording pixel setting (p. 61) of
or
will cause images to
appear coarse (the zoom factor will appear in blue).
Display the menu.
z Press the n button.
Choose [DitaZoom].
z Movoom ler to choose the 4 tab.
z Presp buttns to choose [Digital
om]
e te setting.
s the qr buttons to choose a
magnification.
z Press the n button to complete the
setting and restore the shooting screen.
X The view will be enlarged and the zoom
factor will appear on the screen.
z To return to standard digital zoom, choose
[Digital Zoom] and the [Standard] option.
• The respective focal lengths when using [1.5x] and [2.0x] are
approximately 42.0 – 168 mm and approximately 56.0 – 224 mm (35mm
film equivalent).
• The digital tele-converter cannot be used together with the digital zoom.
• The shutter speeds may be the same when at maximum telephoto (i),
and when zoomed in on the subject using Step 2 on p. 55.
56
Inserting the Date and Time
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 18).
Display the menu.
z Press the n button.
Choose [Date Stamp].
z Move the zoom lever to choose the 4 tab.
z Press the op buttons to choose [Date
Stamp].
Choose thtting.
z e qr ttons to choose [Date] or
[DTime].
Presthe n button to complete the
ttinand restore the shooting screen.
nce set, [DATE] will appear on the
screen.
Shoot.
X The shooting date or time will be recorded
in the image’s lower right corner.
z To restore to the original setting, choose
[Off] in Step 3.
57
Using the Self-Timer
embedded date and time as follows. However, if you do this for images with
an embedded date and time, the date and time may be printed twice.
• Use the DPOF print settings (p. 139) to print.
• Use the included software to print.
Refer to the Software Guide for details.
• Print using printer functions (p. 134).
Using the Self-Timer
The self-timer can be used to shoot a group photo that includes the
photographer. The camera will shoot approximately 10 seconds after the
shutter button is pressed.
Press p buon.
Cse Ò.
z Press the op buttons to choose Ò, then
press the m button.
X Once set, Ò will appear on the screen.
58
Using the Self-Timer
Shoot.
z Press the shutter button halfway to focus
on the subject, then press it fully.
X When the self-timer starts, the lamp blinks
and the self-timer sound plays.
X Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
the countdown has started, press the p
button.
z To restore the original setting, choose
in Step 2.
You can change the delay and er of ss (p. 60).
The camera will soappy 2 seconds after the shutter button is
pressed, prevenng any cake that occurs when pressing the shutter
button.
Choose Î.
z Follow Step 2 on p. 58 to choose Î.
X Once set, Î will appear on the screen.
z Follow Step 3 above to shoot.
59
Using the Self-Timer
Customizing the Self-Timer
You can set the delay (0 – 30 seconds) and the number of shots (1 – 10
shots).
Choose $.
z Follow Step 2 on p. 58 to choose $, then
press the n button immediately.
Choose the settings.
z Press the op btons to choose [Delay]
or [Shots].
z Prer butns to choose a value,
then he m btton.
ce s$ will appear on the screen.
w Sp 3 on p. 59 to shoot.
What if the umber of is set to two or more shots?
• Exposure and white lancsettings are set with the first shot.
• If the flash fires or you set a high number of shots, the shooting interval may take
longer than usual.
• If the memory card fills, shooting stops automatically.
When you set the delay for more than 2 seconds, the lamp and self-timer
sound speed up 2 seconds before the shutter releases (the lamp remains
lit when the flash will fire).
60
Changing the Recording Pixel Setting
(Image Size)
You can choose from 5 recording pixel settings.
Choose the recording pixel setting.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
z To restore the original setting, choose
in Steps 1 –
If you choose
, you cnnot udigital zoom (p. 55) or digital tele-
converter (p. 56).
Changing the Cpression Ratio
(Image Qualiy)
You can choose from the following 2 compression ratios (image quality):
(Fine),
(Normal).
Choose the compression ratio
setting.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
z To restore the original setting, choose
in Steps 1 – 2.
61
Changing the Compression Ratio (Image Quality)
Approximate Values for Recording Pixels and Compression Ratio
Number of Shots per
Memory Card
(Approx. shots)
Compression Single Image Data
Recording Pixels
Ratio
Size (Approx. KB)
4 GB
1231
2514
2320
4641
6352
12069
20116
30174
1630
3352
16 GB
3084
1474
1620
780
5042
10295
9503
(Large)
12M/4000x3000
(Medium 1)
6M/2816x2112
19007
26010
49420
82367
123550
6677
558
(Medium 2)
2M/1600x1200
278
150
(Small)
0.3M/640x480
84
(Widescreen)
4000x2248
13727
• The values in the table are measordio Canon standards and may change
depending on the subject, memd caera settings.
Approximate Vues for Pr Size
z
For sending images as e-mail
attachments.
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
z
For displaying on wide-screen HD TVs
with an aspect ratio of 16:9.
5 x 7 in.
Postcard size
3.5 x 5 in.
62
Shooting in Various Conditions
The camera will select the necessary settings for the conditions in which you
wish to shoot when you choose the matching mode.
Enter K mode.
z Set the mode dial to K.
Choose a Shooting mode.
z After pressing the m button, press the
op buttons to choose
.
z Press the qr buttons to choose a
Shooting mode, en press the m button.
Shoot.
Take shots with reduced blur
(Blur Reduction)
z Lets you shoot with reduced camera shake
and subject blur.
I Take portraits (Portrait)
z Produces a soft effect when
photographing people.
64
Shooting in Various Conditions
JTake landscapes (Landscape)
z Lets you shoot majestic landscapes with a
real sense of depth.
V Take shots of kids and pets
(Kids&Pets)
z Lets you capture subjects that move
around, such as children and pets, without
missing photo opportunities.
z Move approxately 1 m (3.3 ft.) or more
away from subject and shoot.
Taots in ow light conditions
Low ght)
ets ou take shots in dark places with
duced camera shake and subject blur.
w Take shots of people at the beach
(Beach)
z Lets you take shots of brightly lit people on
sandy beaches where the reflected
sunlight is strong.
OTake shots of foliage (Foliage)
z Lets you shoot trees and leaves, such as
new growth, autumn leaves or blossoms,
in vivid colors.
65
Shooting in Various Conditions
P Take shots of people in snow
(Snow)
z Lets you take bright, natural-colored shots
of people against snowy backgrounds.
t Take shots of fireworks
(Fireworks)
z Lets you take shots of fireworks in vivid
colors.
In t mode, attach the camera to a tripod to ent the camera from
moving and blurring the image.
• In
and
modes, thecordel setting will be fixed at
(1600 x 1200 pixels).
• In V mode, images mcoare because the ISO speed (p. 83)
is increased o match thg conditions.
66
Easily Changing the Brightness and Color
When Shooting (Live View Control)
You can easily change the brightness, color and tone to match your
preferences when shooting.
Set the camera to
mode.
z Set the mode dial to
.
Press the m button.
X The setting screen will appear.
Adjust the setting.
z Press the op buttons to choose an
option, then ess the qr buttons while
watching e reen to adjust the setting.
z Phe m utton.
Sho
You cadjust ss ohe image. The more to the right, the
brighr the imagmore to the left, the darker the image gets.
Brightness
Color
You n change the cor of the image. The more to the right, the more
vivid timage ets, the more to the left, the more neutral the image gets.
You can athe tone of the image.The more to the right, the stronger the
Tone
warm red tones get, the more to the left, the the stronger the cool blue tones
get.
67
Shooting in Discreet Mode
You can shoot with camera sounds muted, and the flash and lamp
deactivated. Use this mode in areas where camera sounds, lights and flash
are not permitted.
Set the camera to
mode.
z Set the mode dial to
.
Shoot.
When the camera is set to
mode, sounds will remain muted even when
in Playback mode. Operation sounds will be muted, and audio will not play
back when viewing movies.
Adding Effects and Shooting
(Creative Filters)
You can add various effects ts wn shooting.
e camera to
mode.
z Set the mode dial to
.
Choose a Shooting mode.
z After pressing the m button, press the
op buttons to choose
.
z Press the qr buttons to choose a
Shooting mode, then press the m button.
Shoot.
Since you may not achieve the expected results with images shot in
and , try taking some test shots first.
,
,
,
68
Adding Effects and Shooting (Creative Filters)
Shoot images with vivid colors
(Super Vivid)
z Lets you take shots with vivid, intense
colors.
Take posterized shots
(Poster Effect)
z Lets you take shots that look like an old
poster or illustration.
eye Effect)
Lets you shoot with the disefff a fish-eye lens.
ose
.
Follow Steps 1 – 2 on p. 68 to choose
.
Choose an effect level.
z Press the l button.
X [Effect Level] will appear on the screen.
z Press the qr buttons to choose an effect
level, then press the l button.
X You can check the effect on the screen.
Shoot.
69
Adding Effects and Shooting (Creative Filters)
Take Shots That Look Like a Miniature Model
(Miniature Effect)
Blurs chosen portions in the top and bottom of an image to produce the effect
of a miniature model.
Choose
.
z Follow Steps 1 – 2 on p. 68 to choose
X A white frame (the area that will not be
blurred) appears on the screen.
.
Choose the area to keep in focus.
z Press the l button.
z Move the zoom ver to change the frame
size, and presop buttons to change
the fositiothen press the l
butto
t.
• If you press e m button ep 2, the horizontal/vertical orientation of
the frame wilwitch, nd you can press the qr buttons to change the
frame position en is displayed vertically.
• Holding the camera vertically will change the orientation of the frame.
70
Adding Effects and Shooting (Creative Filters)
Shoot with the Effects of a Toy Camera
(Toy Camera Effect)
This effect darkens and blurs the corners of the image, and changes the
overall color so that it looks like an image shot with a toy camera.
Choose
.
z Follow Steps 1 – 2 on p. 68 to choose
.
Choose a color tone.
z Press the l button.
X [Color Tone] will appear on the screen.
z Press the qr buttons to choose a color
tone, then prs the l button.
X You can cethe color tone on the
s
Sho
Standard
Warm
Cool
Imagelook re sot with a toy camera.
Giveimages a wane than [Standard].
Gives mages cooler tone than [Standard].
71
Adding Effects and Shooting (Creative Filters)
Shooting in Monochrome
You can shoot images in black and white, sepia or blue and white.
Choose
.
z Follow Steps 1 – 2 on p. 68 to choose
.
Choose a color tone.
z Press the l button.
X [Color Tone] will appear on the screen.
z Press the qr buttons to choose a color
tone, then press the l button.
X You can check the color tone on the
screen.
Shoot.
B/W
Lets you shoot black white s.
Sepia
Blue
Lets you shoot sepage
Lets you hooblue mages.
72
Detecting a Face and Shooting
(Smart Shutter)
Detecting a Smile and Shooting
The camera will shoot, even without pressing the shutter button, when it
detects a smile.
Choose
.
z Follow Steps 1 – 2 on p. 64 to choose
,
then press the l button.
z Press the qr buttons to choose
, then
press the l button.
X The camra l enter shooting stand-by,
and mile Dction on] will appear on the
oinhe camera at a person.
ach me the camera detects a smile it will
oot after the lamp lights.
Press the p button to pause smile
detection. Press the p button again to
resume smile detection.
What if a smile is not detected?
Smiles are easier to detect if the subject faces the camera, and opens their mouth
enough to show some teeth when smiling.
Changing the number of shots
After choosing
in Step 1, press the op buttons.
• You should switch to another mode when you finish shooting, or the
camera will continue taking shots each time the camera detects a smile.
• You can also shoot by pressing the shutter button.
73
Detecting a Face and Shooting (Smart Shutter)
Using the Wink Self-Timer
Point the camera at a person and press the shutter button fully. The camera
will shoot approximately two seconds after it detects a wink.
Choose
.
z Follow Steps 1 – 2 on p. 64 to choose
,
then press the l button.
z Press the qr buttons to choose
, then
press the l button.
Compose the shot and press the
shutter button halfway.
z Confirm that a gen frame appears
around the fathe person who will
wink
ess shutter button fully.
camra will enter shooting stand-by,
Wink to take picture] will appear on
creen.
X The lamp will blink and the self-timer
sound will play.
Face the camera and wink.
X The shutter will release approximately 2
seconds after a wink is detected from the
person inside the frame.
z To cancel the countdown, press the p
button.
74
Detecting a Face and Shooting (Smart Shutter)
What if a wink is not detected?
• Wink a bit slowly.
• A wink may not be detected if eyes are covered by hair or a hat, or when wearing
glasses.
Changing the number of shots
After choosing
in Step 1, press the op buttons.
• Shutting both eyes will also be detected as a wink.
• If a wink is not detected, the shutter will release approximately 15
seconds later.
• If there are no people in the shot when the hutter button is pressed fully,
the camera will shoot after a person entethe shot and winks.
75
Detecting a Face and Shooting (Smart Shutter)
Using the Face Self-Timer
The shutter will release approximately two seconds after the camera detects
a new face (p. 88). You can use this when the photographer wants to be in
the image, such as a group photo.
Choose
.
z Follow Steps 1 – 2 on p. 64 to choose
,
then press the l button.
z Press the qr buttons to choose
, then
press the l button.
Compose the shot and press the
shutter button alfway.
z Make sure a eframe appears on the
face d on ad white frames appear
on otes.
s thshutter button fully.
amera will enter shooting stand-by,
Look straight at camera to start count
down] will appear on the screen.
X The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
X When the camera detects a new face, the
lamp and self-timer sound will speed up
(the lamp remains lit when the flash will
fire), and two seconds later the shutter will
release.
z To cancel shooting with the timer after
countdown has started, press the p
button.
Changing the number of shots
After choosing
in Step 1, press the op buttons.
76
Shooting Long Exposures
Even if your face is not detected after joining the subjects, the shutter will
release approximately 15 seconds later.
Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to shoot
long exposures. However, you should attach the camera to a tripod to prevent
the camera from moving and blurring the image.
Choose ≈.
z Follow Steps 1 – 2 on p. 64 to choose ≈.
hooe the shutter speed.
ess he o button.
ess the qr buttons to choose the
shutter speed, then press the m button.
Confirm the exposure.
z When you press the shutter button
halfway, the exposure for the chosen
shutter speed will appear on the screen.
• The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.
77
78
Choosing Settings Yourself
In this chapter you will learn how to use the various functions in G
mode to progressively advance your shootg skills.
•
•
•
This chapter asmes hat you have set the mode dial to G mode.
G stands for Program AE.
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those modes
(pp. 168 – 175).
79
Shooting in Program AE
You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure. The focusing range is approximately 5 cm
(2.0 in.) – infinity at maximum wide angle (j), and approximately 80 cm
(2.6 ft.) – infinity at maximum telephoto (i).
Enter G mode.
z Set the mode dial to G.
Adjust the settings according to
your purposes (pp. 81 – 99).
Shoot.
What if the shutter speed and aperturvalappear in orange?
If a correct exposure cannot be obtained ressinthe shutter button
halfway, the shutter speed and aperture vpear in onge. Try the following
settings to obtain the correct ex.
• Turn on the flash (p. 81)
• Choose a higher ISsed
80
Adjusting the Brightness
(Exposure Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of -2 to +2.
Enter Exposure Compensation
mode.
z Press the o button.
Adjust the brightness.
z While watching the screen, press the qr
buttons to adjust the brightness, then
press the m button.
X The exposurcompensation amount will
appear on creen.
Turning the Flh O
You can make the sh fire yu shoot. The effective flash range is
approximately 3cm – 4.0 – 13 ft.) at maximum wide angle (j),
and approximat50 cm – 2.0 m (1.6 – 6.6 ft.) at maximum telephoto (i).
Choose h.
z After pressing the r button, press the qr
buttons to choose h, then press the m
button.
X Once set, h will appear on the screen.
81
Adjusting the White Balance
The white balance (WB) function sets the optimal white balance for natural
looking colors to match the shooting conditions.
Choose the white balance function.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
Automatically sets the optimal white balance for the shooting
conditions.
Auto
Day Light
Cloudy
For shooting outdoors, in fine weeonditions.
For shooting in cloudyr twilighonditions.
For shooting under tungd bulb-typ(3-wavelength)
fluorescent li
Tungsten
For shooting m-we fluorescent, cool-white fluorescent
anwam-whwavelength) fluorescent lighting.
Fluorescent
Fshooting unlight fluorescent and daylight-type (3-
welength) luorescent lighting.
Fluorescent H
Custom
For nuasetting a custom white balance.
Custom White Balance
You can adjust the white balance to match the light source at the shooting
location. Make sure that you set the white balance under the light source of
the actual scene you will shoot.
z In Step 2 above, choose
.
z Make sure the entire screen is filled with a
plain, white colored subject, then press the
l button.
X The tint on the screen will change when
white balance data is set.
If you change camera settings after recording white balance data, the tone
may not turn out properly.
82
Changing the ISO Speed
Choose the ISO speed.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
Automatically adjusts the ISO speed to the Shooting mode and shooting
conditions.
For shooting outdoors, in fine weather conditions.
For shooting in cloudy, or twiliconditions.
For shooting nightscapes, in ark interiors.
Low
High
Changing the ISO speed
• Lowering the ISO speed shaer images, but there may be an
increased chance of imain ctain shooting conditions.
• Raising the ISO speed resster shutter speed, reducing image blurring
and letting the ash reach grdistances to the subject. The images,
however, will apear coase.
When the camera is set to
, you can press the shutter button halfway to
display the automatically set ISO speed.
83
Correcting the Brightness and Shooting
(i-Contrast)
The camera can detect areas in the scene, such as faces or backgrounds,
that are too bright or dark and automatically adjust them to the optimum
brightness when shooting. Also, when the overall image is lacking in contrast,
the camera will automatically correct the image for a sharper impression
when shooting.
Choose [i-Contrast].
z Press the n button to choose
[i-Contrast] from the 4 tab, then press the
X Once set, @ will appear on the screen.
• Under some conditions, the imaappeaoarse or may not be
corrected properly.
• You can correct recordges 29).
84
Continuous Shooting
You can shoot continuously at a maximum speed of approximately 1.0
images/second while the shutter button is pressed fully and held.
Choose a Drive mode.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose W, then
press the m button.
z Once set, W will appear on the screen.
X As long s yohold the shutter button
dowthe cra will shoot successive
• Cannot be used wilf-ti(pp. 58, 59, 60).
• In (p. 64) and mos, continuous shooting speed
increase
• For conuous shootfocus and exposure are locked when the
shutter bton is pssed halfway.
• Depending n the hooting conditions and the camera settings, the
camera may stop shooting momentarily, or the shooting speed may slow
down.
• As the number of images increases, the shooting speed may slow down.
• If the flash fires, the shooting speed may slow down.
85
Changing the Tone of an Image (My Colors)
You can change the tone of an image, for example to sepia or black and
white, when shooting.
Choose My Colors.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
My Colors Off
Vivid
—
Emphasizes the contrast and color saation for a vivid impression.
Changes the image to s.
Neutral
Sepia
B/W
Changes the o blad white.
You can adjushaness, and color saturation etc. to your
prere.
Custom Color
The white balce cannot be set in
and
(p. 82).
Custom Color
The contrast, sharpness, and color saturation in an image can be chosen and
set at 5 different levels.
z Follow Step 2 above to choose
, then
press the l button.
z Press the op buttons to choose an
option, then press the qr buttons to
choose a value.
z The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
z Press the l button to complete the
setting.
86
Shooting Close-ups (Macro)
You can shoot an object at a close distance or even shoot extreme close-ups
of it. The focusing range is approximately 3 – 50 cm (1.2 in. – 1.6 ft.) from the
end of the lens at maximum wide angle (j).
Choose e.
z After pressing the q button, press the qr
buttons to choose e, then press the m
button.
X Once set, e will appear on the screen.
The edges of the image may darken if the flash fires.
How can I take better close-ups?
Try attaching the camera to a tripod aing in Î o prevent the camera from
moving and blurring the imag. 59).
e will turn gray in thdisays in the yellow bar underneath the
zoom bar, d e caot focus.
Shooting Far Away Subjects (Infinity)
When it is difficult to focus because your shot contains subjects that are both
near and far, you can change the focusing range to focus more reliably on far
away subjects (approx. 3.0 m (9.8. ft.) or more from the camera) only.
Choose u.
z After pressing the q button, press the qr
buttons to choose u, then press the m
button.
X Once set, u will appear on the screen.
87
Changing the AF Frame Mode
You can change the AF (Auto Focus) frame mode to match the scene you
want to shoot.
Choose [AF Frame].
z Press the n button to choose [AF
Frame] from the 4 tab, then press the qr
buttons to choose an option.
Face AiAF
•
Detects people’s faces and sets the focus, exposure (evaluative metering
only) and white balance (
only).
•
When the camera is pointed at subjects, a whitfme appears on the face
the camera judges to be the main sand grframes (max. 2) will
appear on other faces.
•
•
A frame will follow a movint wn a certain range.
When the shutter button is alfy, up to 9 green frames will
appear on faces tat the cases on.
• If a face is ndetecte, or only gray frames (no white frame) appear, up
to 9 green frams wilppear on the areas the camera focuses on when
the shutter button is pressed halfway.
• If a face is not detected when Servo AF (p. 93) is set to [On], the AF frame
will appear in the center of the screen when you press the shutter button
halfway.
• Examples of faces that cannot be detected:
- Subjects that are far away or extremely close
- Subjects that are dark or light
- Faces turned to the side or at an angle, or faces with a portion hidden
• The camera may mistakenly identify non-human subjects as a face.
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
88
Changing the AF Frame Mode
Tracking AF
You can choose the subject you want to focus on and shoot (p. 90).
Center
The AF frame is locked to the center. This is effective for focusing on a
specific point.
You can reduce the AF frame size
• Press the n button to choose [AF Frame Size] from the 4 tab, then
choose [Small].
• The AF frame is set to [Normal] when using the digital zoom (p. 55) or digital
tele-converter (p. 56).
If the camera cannot focus when you pess e shutter button halfway, the
AF frame will turn yellow and
will ap
Changing the Composition he Fous Lock
While you keep the shuttepreed halfway, the focus and exposure
are locked. You can now e anshoot. This is called Focus Lock.
ocus.
z Center the subject you want in focus, and
press the shutter button halfway.
z Confirm that the AF frame on the subject is
green.
Recompose.
z Keep the shutter button pressed halfway
and move the camera to recompose the
scene.
Shoot.
z Press the shutter button fully.
89
Choosing the Subject to Focus On
(Tracking AF)
You can choose the subject you want to focus on and shoot.
Choose [Tracking AF].
z Press the n button to choose [AF
Frame] from the 4 tab, then press the qr
buttons to choose [Tracking AF].
X
will appear in the center of the screen.
Choose the subject to focus on.
z Point the camerso that
is on the
subject you ant focus on and press the
q button.
camra will beep and
will appear
a subject is detected. The camera
ontinue to track the subject within a
certain range even if the subject moves.
X If the camera does not detect the subject,
will appear on the screen.
z To cancel tracking, press the q button
again.
Shoot.
z Press the shutter button halfway.
will
change into a blue which will follow the
subject while the camera continues to
adjust the focus and exposure (Servo AF)
(p. 93).
z Press the shutter button fully to shoot.
X Even after shooting completes,
will
appear, and the camera will continue to
track the subject.
90
Magnifying the Focal Point
• The camera will detect a subject even if you press the shutter button half
way without pressing the q button. When shooting completes,
appear in the center of the screen.
will
• Servo AF (p. 93) is fixed to [On].
• The camera may not be able to track the subject if the subject is too small,
moves too quickly or if the contrast between the subject and the
background is too low.
• Not available in e or u.
Magnifying the Focal Point
If you press the shutter button halfway, the AF frame will magnify and you can
check the focus.
Ch[AF-oint Zoom].
z Pe n button to choose [AF-
PoiZoom] from the 4 tab, then press
e qbuttons to choose [On].
Check the focus.
z Press the shutter button halfway.
X In [Face AiAF] (p. 88), the face detected as
the main subject will appear magnified.
X In [Center] (p. 89), the contents of the
center AF frame will appear magnified.
What if the display does not magnify?
The display will not appear magnified in [Face AiAF] if a face cannot be detected
or is too big in relation to the screen. In [Center], it will not appear magnified if the
camera cannot focus.
The magnified display will not appear when using the digital zoom (p. 55),
digital tele-converter (p. 56), Tracking AF (p. 89), Servo AF (p. 93) or when
using a TV as a display (p. 100).
91
Shooting with the AF Lock
The focus can be locked. After locking the focus, the focal distance will not
change even when you release your finger from the shutter button.
Lock the focus.
z Keep the shutter button pressed halfway
and press the q button.
X The focus locks and % appears on the
screen.
z If you release your finger from the shutter
button and press the q button again, %
will disappear and the focus will unlock.
Compose the scene and shoot.
92
Shooting with Servo AF
While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
Choose [Servo AF].
z Press the n button to choose [Servo
AF] from the 4 tab, then press the qr
buttons to choose [On].
Focus.
z The focus and exposure will be maintained
where the blue AF frame appears while
you press thshutter button halfway.
• The camera may not be able to focus e conditions.
• In low light conditions, AF fray not n blue even after pressing
the shutter button halfway. In e, you n set the focus and
exposure with the Ae se.
value appaorase yur finger from the shutter button, then
press it ain halfwa
• You cant shoot with the AF lock in this mode.
• The [AF-Pnt Zom] option in the 4 tab is not available in Servo AF
mode.
• Not available when using the self-timer (pp. 58, 59, 60).
93
Choosing the Person to Focus On
(Face Select)
You can choose a specific person’s face to focus on and then shoot.
Enter Face Select mode.
z Point the camera toward the face of the
subject and press the 0 button.
X After [Face Select : On] appears, a face
frame
will appear around the face
detected as the main subject.
z Even if the subject moves, the face frame
will follow the subject within a certain
range.
z If a face is not dected,
will not
appear.
Chooface o focus on.
ou ss the 0 button, the face frame
will ove to another face detected by
mera.
n the frame has made a full circuit of
all detected faces, [Face Select : Off] will
appear, and the AF frame mode screen will
reappear.
Shoot.
z Press the shutter button halfway. When
the camera focuses,
will change into
.
z Press the shutter button fully to shoot.
94
Changing the Metering Method
You can change the metering method (brightness measuring function) to
match the shooting conditions.
Choose the metering method.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The setting will appear on the screen.
For standard shooting conditions, including back lit shots.
Automatically adjusts the expose to match the shooting
conditions.
Evaluative
Center
Averages the light md from entire frame, but gives greater
Weighted Avg. weight to the cen
Only metithin
Spot
(Spot AE Point frame) that appears at
the censcre.
95
Shooting with the AE Lock
You can lock the exposure and shoot, or set the focus and exposure
separately to shoot. AE stands for “Auto Exposure”.
Choose ! (p. 54).
Lock the exposure.
z Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
X When & appears, the exposure will be
locked.
z If you release your finger from the shutter
button and preshe o button again, &
will disappeaanAE will unlock.
Comhe scne and shoot.
Shooting with tLock
Just as with the AE lk, you can lock the exposure for shooting with the flash.
FE stands for “Flash xposue”.
Choose h (p. 81).
Lock the flash exposure.
z Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
X The flash will fire and when ( appears,
the flash output will be retained.
z If you release your finger from the shutter
button and press the o button again, (
will disappear and FE will unlock.
Compose the scene and shoot.
96
Shooting with Slow Synchro
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Choose ….
z After pressing the r button, press the qr
buttons to choose …, then press the m
button.
X Once set, … will appear on the screen.
Shoot.
z Even if the flah fires, ensure that the main
subject es ot move until the shutter
souends
Attach the camera to a tripod tt the caera from moving and
blurring the image.
97
Red-Eye Correction
You can automatically correct red-eye that occurs in images taken with the
flash.
Choose [Flash Settings].
z Press the n button to choose [Flash
Settings] from the 4 tab, then press the
m button.
Choose the setting.
z Press the op buttons to choose [Red-
Eye Corr.], then ess the qr buttons to
choose [On].
X Once Πwill ppear on the screen.
Red-eye correction may d to reas other than red eyes. For
example, when makeen sed around eyes.
• You can alscorrect recormages (p. 129).
• You can also splay e screen in Step 2 by pressing the r button, then
the n butto
98
Checking for Shut Eyes
When the camera detects the possibility that people have their eyes shut,
appears on the screen.
Choose [Blink Detection].
z Press the n button to choose [Blink
Detection] from the 4 tab, then press the
qr buttons to choose [On].
Shoot.
X When a person with shut eyes is detected,
a frame and
appear on the screen.
• This function is only available for the last image shot when you have set
the camera to 2 or more shots in
or $ mode.
• Not available in W mode.
99
Shooting Using the Viewfinder
If you want to save battery power, you can use the viewfinder for shooting
screen. The camera will automatically focus on subjects, but it will not detect
and focus on faces.
Turn off the screen.
z Press the l button to turn off the
screen (p. 43).
Compose the scene and shoot.
z Look into the viewfinder to compose the
scene and shoot.
The area visible in the viewfinder er sligy from the image taken.
You may be able to see e lethrough the viewfinder depending
on the zoom position.
Shooting Using a TV as the Display
You can use a TV to dispy the camera screen content while shooting.
•
•
To connect the camera to a TV, follow the Steps in “Viewing Images on a
TV” (p. 116).
Shooting procedures are the same as when using the camera screen.
100
Using Various Functions for
Shooting Movies
This chapter serves as a more advanced vrsion of the “Shooting
Movies” and “Viewing Movies” sections in apter 1, and explains how
to use various functions for shond vieng movies.
•
•
This chapter assumes that you have set the mode dial to E.
The latter half of the chapter explaining movie playback and editing
assumes that you have pressed the 1 button to enter Playback mode.
101
Changing the Movie Mode
You can choose among 2 different Movie modes.
Choose a Movie mode.
z After pressing the m button, press the
op buttons to choose E.
z Press the qr buttons to choose a Movie
mode, then press the m button.
E
Standard
For shooting standard movies.
You can shoot movies that look like a miniature model (p. 102).
Miniature Effect
Shoot Movies That Look Like a Miniature
Model (Miniature Eff)
You can shoot movies that loooviminiature models. You create the
miniature model effect by chouppr and lower portions of the scene
that will be blurred, ad e plaed, which makes people and objects
in the scene move uickly durinack. Audio will not be recorded.
Choose
.
z Follow the steps above to choose
.
X A white frame (the area that will not be
blurred) appears on the screen.
Choose the area to keep in focus.
z Press the l button.
z Move the zoom lever to change the frame
size, and press the op buttons to change
the frame position.
102
Shoot Movies That Look Like a Miniature Model (Miniature Effect)
Choose a playback speed.
z Press the n button.
z Press the qr buttons to choose a
playback speed.
z Press the n button to complete the
setting and restore the shooting screen.
Shoot.
Playback Speeds and Estimated Playback Times
(for 1 Min. Clips)
Speed
Playback Time
Approx. 12 sec.
Approx. 6 sec.
pprox. 3 sec.
• If you press the m Ste2, the horizontal/vertical orientation of
the frame switccan ress the qr buttons to change the
frame pition when ayed vertically.
• Holding e camera vertially will change the orientation of the frame.
• Since you ay noachieve the expected results depending on the
shooting conns, try taking some test shots first.
103
Changing the Image Quality
You can choose among 3 different image quality settings.
Choose the image quality setting.
z After pressing the m button, press the
op buttons to choose
.
Choose an option.
z Press the qr buttons to choose an option,
then press the m button.
X The option you set will appear on the
screen.
Image Quality and Shooting Time per Memory Card
emory Card Capacity
Image RecordingPixels,
Quality Frame Rate
Content
GB
16 GB
Approx.
1 hr.
49 min. 48 sec.
1280 x 720 pixels, For shooting
Appox.
24 frames/sec.*
hign mes. 26 min. 48 sec.
The ity w
be hi
Approx.
Approx.
3 hr.
25 min. 54 sec.
640 x 480 pels,
30 frames/se
compareh
, but
50 min. 17 sec.
the ecording time will
bhorter.
Since the file size is
small, shooting time
will increase, but the
image quality will
decrease.
Approx.
3 hr.
Approx.
12 hr.
320 x 240 pixels,
30 frames/sec.
2 min. 52 sec. 28 min. 47 sec.
*
movies play back at 30 fps.
• Based on Canon’s testing standards.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 10 minutes when shooting in , and
approximately 1 hour when shooting in or
.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
104
AE Lock/Exposure Shift
You can lock the exposure or change it in 1/3 steps within a range of ±2
before shooting.
Focus.
z Press the shutter button halfway to focus.
Lock the exposure.
z After releasing the shutter button, press
the o button to lock the exposure. The
exposure shift bar appears.
z Press the o button again to release the
lock.
Change the xposure.
z While watcthe screen, press the qr
o adjuthe exposure.
ho
105
Other Shooting Functions
The following functions can be used in the same way as for still images. Some
Refer to “Functions Available in Each Shooting Mode” and “Shooting Menu”
(pp. 168 – 175).
• Zooming in More Closely On Subjects
before shooting.
• Using the Self-Timer (p. 58)
The number of shots cannot be set.
• Adjusting the White Balance (p. 82)
• Shooting Close-ups (Macro) (p. 87)
• Shooting Far Away Subjects (Infinity) (p. 87)
• Shooting with the AF Lock (p. 92)
• Shooting Using a TV as the Display (p. 100)
• Turning Off the AF Assist Beam (p. 1
• Displaying the Overlay (p. 153)
106
Editing
You can trim the beginnings and ends of recorded movies.
Choose *.
z Follow Steps 1 – 3 on p. 31 to choose *,
then press the m button.
X The movie editing panel and the movie
editing bar will appear.
Movie Editing Panel
Set the editing range.
z Press the obuttons and choose
or
.
z If you press qr buttons to move
ar at ints where the movie can
bd. If you hoose , you can trim
the ginning of the movie from . If you
, you can trim the end of the
,
oo
Movie Editing Ba
ovie from
.
Even if you move to a point other than a
, only the portion from the nearest
to the left will be trimmed when
chosen. Only the portion from the nearest
to the right will be trimmed when is
chosen.
is
Check the edited movie.
z Press the op buttons to choose
(Play), then press the m button. The
edited movie will play.
z To edit the movie again, repeat Step 2.
z To cancel editing, press the op buttons
to choose
. After pressing the m
button, press the qr buttons to choose
[OK], then press the m button again.
107
Editing
Save the edited movie.
z Press the op buttons to choose
press the m button.
, then
z Press the qr buttons to choose [New
File], then press the m button.
X The movie will be saved as a new file.
• When [Overwrite] is chosen in Step 4, the unedited movie is overwritten
with the edited movie, erasing the original.
can be chosen.
• If the batteries are depleted partway through saving, the edited movie
clips may not be saved.
• When editing movies, you should use bariewith sufficient charge,
fully charged NiMH AA batteries oompaower adapter (both sold
separately) (p. 37).
108
Using Various Playback and
Editing Functions
This chapter explains various ways to play ack and edit images.
•
Press the 1 button to enter Playode befre operating the camera.
• It may not be possbaor edit images that have been edited
on a comuthavfile names changed, or have been taken
on a diffent camer
• The edit nction (pp. 126 – 130) cannot be used if the memory card does
not have eugh ee space available.
109
Quickly Searching Images
Searching Images Using Index Display
Displaying multiple images at the same time lets you quickly find the image
you want.
Move the zoom lever toward g.
X Images will display in an index.
z The number of images increase each time
you move the lever toward g.
z The number of images decrease each time
you move the lever toward k.
Choose an image.
z Press the opqbuttons to choose an
image.
X An rame pears on the chosen
imag
ss tm button to display the chosen
e btself.
Searching Images bolling
Pressing the qr butns for ore than 1 second will display images in a line
letting you quickly seah thm. You can also jump by the shooting date
(Scroll Display).
Choose an image.
z If you set the camera to single image
playback and press the qr buttons for
more than 1 second, the screen at the left
will appear. Press the qr buttons to
choose an image.
z Press the m button to restore single
image playback.
z
Press the op buttons during scroll display
to search images by the shooting date.
To turn off this effect, press the n button to choose [Scroll Display]
from the 1 tab, then choose [Off].
110
Searching for Images Using the Jump Display
When there are many images on the memory card, you can search them by
a specified method or image unit.
Choose a jump method.
z In single image playback, press the o
button.
X The jump method and the position of the
currently displayed image will appear at
the bottom of the screen.
z Press the op buttons to choose the
desired jump method.
Switch images.
z Press thqr buttons.
X Imas will sch according to the chosen
Position of currently
jthod.
displayed image
z To n to single image playback, press
he n button.
Jump to Favites
Jump 10 Imes
Jump 100 Imas
Jump Shot Date
Jump to My Category
Jump to first
s the images tagged as favorites (p. 122).
s over 10 images at a time.
Jumps over 100 images at a time.
Jumps to the first image in each shooting date group.
Displays images in each category (p. 123).
Jumps to still images only.
—
Jump to Movie
Jumps to movies only.
• The number of images matching the jump method will display on the right side of the
screen except for and
.
If there are no images matching the jump method, the qr buttons will not
function.
111
Viewing Slideshows
You can automatically play back images recorded to a memory card.
Choose [Slideshow].
z Press the n button to choose
[Slideshow] from the 1 tab, then press the
m button.
Choose a setting.
z Press the op buttons to choose a menu
item, then press the qr buttons to choose
an option.
Repeat
Replayback of images
Play isplay e for each image
Transition effects when switching
between images
ct
e [Start].
z Press the op buttons to choose [Start],
then press the m button.
X The slideshow will start a few seconds
after [Loading image...] displays.
z You can pause/restart a slideshow by
z Press the n button to stop the
slideshow.
• If you press the qr buttons during playback, the image will switch. If you
keep the qr buttons pressed, you can fast-forward through images.
• The power saving function (p. 51) does not work during slideshows.
• You cannot change [Play Time] if [Bubble] is chosen in [Effect].
112
Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame
to check the focus.
Press the l button to switch to
the focus check display (p. 43).
z For images with detected faces, you can
also switch to the focus check display by
pressing the 0 button.
X A white frame will appear where the AF
frame was when the focus was set.
X A gray frame will appear on a face
detected during playback.
X The area witn the orange frame appears
magnifie
Swrame
z Me zoom lever toward k once.
The creen shown on the left will appear.
ess he 0 button to switch between
ames on detected faces. Press the m
button to move to other frames.
Change the magnification level or
location.
z Use the zoom lever to change the display
size, and the opqr buttons to change
the display position while checking the
focus.
z Press the n button to reset the
display to Step 1.
The focus check display is not available for movies.
113
Magnifying Images
Move the zoom lever toward k.
z The display will zoom in on the image and
will appear. If you continue to hold
the zoom lever, it will zoom in up to a
maximum factor of approximately 10x.
z If you press the opqr buttons, you can
move the location of the displayed area.
z Move the zoom lever toward g to zoom
out, or continue to hold it to return to single
image playback.
z When
the m button to switch to
appears on the screen, press
. Press
Approximate Location of
Displayed Area
the qr buttons tswitch between images
while zoomedss the m button again
to rethe ornal setting.
• In magnified display, prthe button restores single image
playback.
• Movies cannomag
Displaying Various Images (Smart Shuffle)
The camera will choose four images based on the displayed image.
If you choose one of those images, the camera will select four more images
letting you enjoy playing back images in an unexpected order.
This will work best if you take many shots of various scenes.
Choose [Smart Shuffle].
z Press the n button to choose [Smart
Shuffle] from the 1 tab, then press the m
button.
X Four images will appear as possibilities.
114
Changing Image Transitions
Choose an image.
z Press the opqr buttons to choose the
image you want to view next.
X The chosen image will be displayed in the
middle, and the next four possibilities will
appear.
z Press the m button to display the middle
image at full size. Press the m button
again to restore the original display.
z Press the n button to restore single
image playback.
• Only still images shot with this camera wiplay back in Smart Shuffle.
• Smart Shuffle is not available in the fowg situations:
- If there are less than 50 images en with camera on the memory card
- If you play back images not by SmShuffle
- During filtered playback
Changing Imaansitions
You can choose om 3 transition effects when switching between images in
single image playck.
Choose [Transition].
z Press the n button to choose
[Transition] from the 1 tab, then press the
qr buttons to choose a transition effect.
115
Viewing Images on a TV
Using the separately sold AV cable (p. 2), you can connect the camera to a
TV to view images you have shot.
Turn off the camera and TV.
Connect the camera to the TV.
z Open the camera’s terminal cover and fully
insert the cable plug into the camera’s
terminal.
z Insert the cable plug fully into the video
White or black
input terminals as shown in the illustration.
Yellow
Turn on the TV nd switch it to the
input the cabls connected to.
Yellow
Black
on he camera.
the 1 button to turn on the camera.
X image will appear on the TV (nothing
will appear on the screen of the camera).
z After you finish, turn off the camera and
TV, and unplug the cable.
What if the images don’t display correctly on the TV?
Images will not display correctly if the camera’s video output setting (NTSC/PAL)
does not match the TV system. Press the n button and choose [Video
System] from the 3 tab to switch to the correct video system.
116
Protecting Images
You can protect important images so that they cannot be accidentally erased
with the camera (pp. 27, 120).
Choose a selection method
Choose [Protect].
z Press the n button to choose
[Protect] from the 1 tab, then press the
m button.
Choose a selection method.
selion md, then press the m
z Pre n button to complete the
settg and restore the menu screen.
If you formt the mempp. 21, 145), protected images will also be
erased.
Protected imes cnnot be erased with the camera’s erase function. To
erase an image, cancel protection settings first.
Choosing Images Individually
Choose [Select].
z Follow Step 2 above to choose [Select],
then press the m button.
Choose images.
z Press the qr buttons to choose an image,
then press the m button.
X
will appear on the screen.
z Press the m button again to deselect the
image. will disappear.
z To choose additional images, repeat the
above procedure.
117
Protecting Images
Protect the image.
z If you press the n button, a
confirmation screen will appear.
z Press the qr buttons to choose [OK], then
press the m button.
If you switch to Shooting mode or turn off the power before performing the
operations in Step 3, images will not be protected.
Select Range
Choose [Select Range].
z Follow Step on . 117 to choose [Select
Rangen prthe m button.
Chootartinimage.
ss tm button.
z Press the qr buttons to choose an image,
then press the m button.
118
Protecting Images
Choose an ending image.
z Press the r button to choose [Last image],
then press the m button.
z Press the qr buttons to choose an image,
then press the m button.
z You cannot choose images before the first
image.
Primags.
z Pe p buton to choose [Protect],
heress the m button.
Choose All Images
Choose [All Images].
z Follow Step 2 on p. 117 to choose [All
Images], then press the m button.
Protect images.
z Press the op buttons to choose [Protect],
then press the m button.
You can unlock groups of protected images if you choose [Unlock] in Step
4, while in [Select Range] or Step 2 while in [All Images].
119
Erasing All Images
You can erase all images at once. Since erased images cannot be recovered,
exercise adequate caution before erasing. Protected images (p. 117) cannot
be erased.
Choose a selection method
Choose [Erase].
z Press the n button to choose [Erase]
from the 1 tab, then press the m button.
Choose a seleion method.
z Press the op tons to choose a
seleethod, hen press the m
butto
ss n button to restore the
scen.
Choosing Imges Individually
Choose [Select].
z Follow Step 2 above to choose [Select],
then press the m button.
Choose an image.
z Press the qr buttons to choose an image,
then press the m button.
z
will appear on the screen.
z Press the m button again to deselect the
image. will disappear.
z To choose additional images, repeat the
above procedure.
120
Erasing All Images
Erase.
z If you press the n button, a
confirmation screen will appear.
z Press the qr buttons to choose [OK], then
press the m button.
Select Range
Choose [Select Range].
z Follow Step 2 on p. 120 to choose [Select
Range], then ress the m button.
Choose iaes.
z teps 2 nd 3 on p. 118 to choose
im
ase
ess the p button to choose [Erase],
hen press the m button.
Choose All Images
Choose [All Images].
z Follow Step 2 on p. 120 to choose [All
Images], then press the m button.
Erase.
z Press the qr buttons to choose [OK], then
press the m button.
121
Tagging Images as Favorites
When you tag images as favorites, you can easily categorize just those
images. You can also filter out just those images for viewing (p. 111).
Choose [Favorites].
z Press the n button to choose
[Favorites] from the 1 tab, then press the
m button.
Choose an image.
z Press the qr buttons to choose an image,
then press the m button.
X
will appeothe screen.
z Press m bun again to untag the
imagisappers.
chadditional images, repeat the
e pcedure.
ete the setting.
z If you press the n button, a
confirmation screen will appear.
z Press the qr buttons to choose [OK], then
press the m button.
If you switch to Shooting mode or turn off the power before completing the
setting in Step 3, images will not be tagged as favorites.
If you use Windows 7 or Windows Vista and transfer tagged images to the
computer, they will be given a star rating of 3 (
movies).
) (except for
122
Organizing Images by Category
(My Category)
You can organize images into categories, then choose the categories to filter
and play back (p. 111).
Images are automatically categorized by shooting condition as they are
shot.
: Images with detected faces, or images shot in I or V.
: Images detected as
shot in Jor O.
: Images shot in w, P or t.
,
or
in A or 9 modes, or images
Choosing a Selection Method
Choose [My Category].
z Press thn button to choose [My
Category] fthe 1 tab, then press the
n.
ose a selection method.
z Press the op buttons to choose a
selection method, then press the m
button.
z Press the n button to restore the
menu screen.
Choosing Images Individually
Choose [Select].
z Follow Step 2 above to choose [Select],
then press the m button.
Choose an image.
z Press the qr buttons to choose an image.
Choose a category.
z Press the op buttons to choose a
category, then press the m button.
123
Organizing Images by Category (My Category)
X
will appear on the screen.
z Press the m button again to deselect the
image.
will disappear.
z To choose additional images, repeat the
above procedure.
Complete the setting.
z If you press the n button, a
confirmation screen will appear.
z Press the qr buttons to choose [OK], then
press the m button.
setting in Step 4, images will not be tagged aCategory.
Select Range
se Select Range].
w Step 2 on p. 123 to choose [Select
e], then press the m button.
Choose images.
z Follow Steps 2 and 3 on p. 118 to choose
images.
Choose a category.
z Press the p button to choose an item,
then press the qr buttons to choose a
category.
Complete the setting.
z Press the p button to choose [Select],
then press the m button.
If you choose [Deselect] in Step 4, you can deselect all of the images in the
[Select Range] category.
124
Rotating Images
You can change the orientation of an image and save it.
Choose [Rotate].
z Press the n button to choose [Rotate]
from the 1 tab, then press the m button.
Rotate the image.
z Press the qr buttons to choose an image.
X The image will rotate 90° with each press
of the m bun.
z Press the n button to restore the
mcreen.
• Movies with an imality sg of
cannot be rotated.
• Images cannot be AutRotate] is set to [Off] (p. 154).
125
Resizing Images
You can resize images to a lower pixel setting and save the resized image as
a separate file.
Choose [Resize].
z Press the n button to choose
[Resize] from the 1 tab, then press the
m button.
Choose an image.
z Press the qr buttons to choose an image,
then press the m button.
Choose an image size.
z Press the qr buons to choose an option,
then press the button.
X [Samagewill appear on the
scree
he new image.
z Press the qr buttons to choose [OK], then
press the m button.
X The image will be saved as a new file.
Display the new image.
z When you press the n button,
[Display new image?] will appear on the
screen.
z Press the qr buttons to choose [Yes],
then press the m button.
X The saved image will be displayed.
• You cannot resize an image to a larger size.
• Images recorded at a pixel setting of
3 cannot be edited.
(p. 62), or saved as
in Step
• Movies cannot be edited.
126
Trimming
You can cut out a portion of a recorded image and save it as a new image file.
Choose [Trimming].
z Press the n button to choose
[Trimming] from the 1 tab, then press the
m button.
Choose an image.
z Press the qr buttons to choose an image,
then press the m button.
Adjust the trimming area.
Trimming Area
X A frame will pear around the portion of
the imagto e trimmed.
X The iginal ge will display in the upper
he trimed image will display in
thr right.
f yomove the zoom lever to the left or
ht, ou can change the frame size.
you press the opqr buttons, you can
move the frame.
Trimming AreDisplay
z If you press the l button, you can
change the frame orientation.
Recorded pixels
after trimming
z In an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch between
frames by pressing the 0 button.
z After pressing the m button, press the qr
buttons to choose [OK], then press the m
button again.
Save as a new image and display.
z Follow Steps 4 and 5 on p. 126.
127
Trimming
• Images recorded at a pixel setting of
to (p. 126) cannot be edited.
or
(p. 62), or images resized
• The width and height ratio of an image that can be trimmed is fixed at 4:3.
• The number of recorded pixels in a trimmed image will be smaller than
before trimming.
• Movies cannot be edited.
128
Correcting the Brightness (i-Contrast)
The camera can detect areas in an image, such as faces or backgrounds, that
are too dark and automatically adjust them to the optimum brightness. Also,
when the overall image is lacking in contrast, the camera will automatically
correct the image for a sharper impression. You can choose from 4 levels of
correction, and save the image as a new file.
Choose [i-Contrast].
z Press the n button to choose
[i-Contrast] from the 1 tab, then press the
m button.
Choose an image.
z Press the qr buttons to choose an image,
then pres thm button.
Chan otion.
z Pe qr buons to choose an option,
theress the m button.
e as a new image and display.
ollow Steps 4 and 5 on p. 126.
• Under some tions, the image may appear coarse or not be
corrected properly.
• Repeatedly adjusting the same image may cause it to become coarse.
What if the image wasn’t corrected by the [Auto] option as
well as you would like?
Choose [Low], [Medium] or [High] and adjust the image.
Movies cannot be corrected.
129
Correcting the Red-Eye Effect
You can automatically correct red eyes in images and save them as new files.
Choose [Red-Eye Correction].
z Press the n button to choose [Red-
Eye Correction] from the 1 tab, then
press the m button.
Choose an image.
z Press the qr buttons to choose an image.
Correct the image.
z Press the m button.
X Red-eye detecteby the camera will be
corrected aa ame will appear around
the corcted pon.
z You gnify oreduce the size of the
image the procedures in “Magnifying
gesp. 114).
s a new image and display.
z ss the opqr buttons to choose [New
File], then press the m button.
X The image will be saved as a new file.
z Follow Step 5 on p. 126.
• Some images may not be corrected properly.
• When [Overwrite] in Step 4 is chosen, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
Movies cannot be corrected.
130
Printing
This chapter explains how to choose images for printing, and print
using a Canon-brand PictBridge compliant rinter (sold separately).
Canon-Brand PictBCompiant Printers
This chapter uses Canon-brand SELPHY CP series printers in the
explanations. The displayed screens and available functions will differ
depending on the printer. Please also refer to the Printer User Guide.
131
Easy Print
You can easily print the pictures you take by connecting the camera to a
PictBridge compliant printer (sold separately) using the supplied interface
cable (p. 2).
Turn off the camera and printer.
Connect the camera to the printer.
z Open the cover and insert the cable’s
small plug firmly into the camera terminal
in the direction shown.
z Insert the cae’arge plug into the
printer conntion details, refer to the
user rovidewith the printer.
n the printer.
Turn on the camera.
z Press the 1 button to turn on the camera.
X
will appear on the screen.
132
Printing Images
Choose an image.
z Press the qr buttons to choose an image,
then press the m button.
Print images.
z Press the op buttons to choose [Print],
then press the m button.
X Printing will start.
z If you want to print additional images,
repeat Steps 5 and 6 after printing has
completed.
z After printing as completed, turn off the
camera annter, and unplug the
ie cable
• Refer to p. 38 for Cd Pibridge compliant printers (sold
separate).
• Index prting is not ave on certain Canon-brand PictBridge
complianrinters sold separately).
133
Printing Images
Making Print Settings
Connect the camera to the printer.
z Follow Steps 1 – 5 on p. 132 to display the
screen on the left.
Choose a menu option.
z Press the op buttons to choose an
option.
Choose the option settings.
z Press the qr buttons to choose the option
setting.
Default
Date
Follows the printesengs.
Prints the
File No.
Both
Prints the ber.
oth tdate and file no.
Off
—
he printer's settings.
—
efault
Off
O
Uses shooting information to optimize print settings.
Corrects red-eye.
Red-Eye1
Uses [NR], [Face
image.
] and [Red-Eye1] to correct the
Red-Eye2*
Vivid*
Greens in trees, and blues in the sky and ocean are
enhanced to be more vivid.
NR*
Reduces image noise.
Vivid+NR*
Uses both [Vivid] and [NR] to correct the image.
Corrects brightness for dark faces,such as in backlit
shots.
Face
*
No. of Copies Choose the number of copies.
Trimming
—
—
Choose the area for printing.
Sets the paper size and layout.
Paper Settings
*
Only appears when connected to a PIXMA series printer.
134
Printing Images
Trimming and Printing (Trimming)
You can cut out a portion of an image for printing.
Choose [Trimming].
z Follow Steps 1 – 2 on p. 134 to choose
[Trimming], then press the m button.
X A frame will appear around the portion of
the image to be trimmed.
Choose the trimming area.
z Move the zoom lever to can change the
frame size.
z Press the qr buttons to change the
fosition
z Pe l utton to rotate the frame.
Prethe m button to complete the
ettin.
nt.
z Follow Step 6 on p. 133 to print.
• You may not be able to trim images depending on the aspect ratio, or if
they are too small.
• Trimming photos with embedded dates may not show the dates properly.
135
Printing Images
Choosing the Paper Size and Layout for Printing
Choose [Paper Settings].
z Follow Steps 1 – 2 on p. 134 to choose
[Paper Settings], then press the m button.
Choose a paper size.
z Press the op buttons to choose an
option, then presthe m button.
ose paper type.
thop buttons to choose an
n, then press the m button.
Choose a layout.
z Press the op buttons to choose a layout,
then press the m button.
z Press the qr buttons to set the number of
prints when [N-up] is chosen.
Print.
136
Printing Images
Available Layout Options
Follows the printer's settings.
Default
Prints with a border.
Bordered
Borderless
Prints without a border.
Choose how many copies of an image are printed on a
sheet.
N-up
Prints ID photos.
ID Photo
Only images with the same resolution as the camera's L
(Large) recording pixel setting can be chosen.
Choose the print size.
Choose from 3.5 x 5 in., postcard and wide sized prints.
Fixed Size
Printing ID Photos
Cho[ID oto].
z Fteps 1 4 on p. 136 to choose
[ID oto], then press the m button.
oosthe length of the long side
short side.
z Press the qr buttons to choose the
length, then press the m button.
Choose the printing area.
z Follow Step 2 on p. 135 to choose the
printing area.
Print.
137
Printing Images
Printing Movies
Connect the camera to the printer.
z Follow Steps 1 – 5 on p. 132 to choose a
movie.
z Press the qr buttons to choose 2, then
press the m button to display the screen
on the left.
Choose a printing method.
z Press the op buttons to choose
, then
press the qr buttons to choose a printing
method.
Print.
Printing methods for m
Prindisplayed scene as a still image.
Single
Prints a uence of images from a specified scene on a
sle sheet of paper.
Sequence
ICaption] is set to [On], you can print the folder number,
file number, and the elapsed time for the frame at the
same time.
• Pressing the m button during printing will cancel printing.
• [ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridge
compliant printers from CP720/CP730 and earlier models.
138
Choosing Images for Printing (DPOF)
You can choose up to 998 images on a memory card for printing and specify
settings such as the number of copies so that they can be printed together
(p. 142) or processed at a photo developer service. These selection methods
comply with the DPOF (Digital Print Order Format) standards.
Movies cannot be chosen.
Print Settings
You can set the print type, date and file number. These settings apply to all
images chosen for printing.
Choose [Print Settings].
z Press the n button to choose [Print
Settings] m he 2 tab, then press the
m on.
Adjhe settings.
resthe op buttons to choose a menu
m, then press the qr buttons to choose
n option.
z Press the n button to complete the
setting and restore the menu screen.
Standard
Index
Prints 1 image per page.
Print Type
Prints several reduced size images per page.
Both
On
Off
On
Off
On
Off
Prints both standard and index formats.
Prints the shooting date.
Date
—
Prints the file number.
File No.
—
Removes all print settings after printing.
—
Clear DPOF
data
139
Choosing Images for Printing (DPOF)
• Some printers or photo developer services may not be able to reflect all
of the settings in the prints.
•
may appear when using a memory card with print settings set by a
different camera. These settings will be overwritten with those set by your
camera.
• If [Date] is set to [On], some printers may print the date twice.
• With [Index] chosen, the [Date] and [File No.] options cannot be set to
[On] at the same time.
• The date will be printed in the style set in the [Date/Time] function in the
3 tab, which can be chosen after you press the n button (p. 18).
Choosing the Number of Copies
Choose [Seecmages & Qty.].
z Press n utton to choose [Select
Imay.] frohe 2 tab, then press
e m ton.
se an image.
the qr buttons to choose an image,
then press the m button.
X You will be able to set the number of print
copies.
z If you choose images in [Index],
appears on the screen. Press the m
button again to deselect the image.
disappear.
will
Set the number of prints.
z Press the op buttons to set the number
of prints (maximum 99).
z Repeat Steps 2 and 3 to choose other
images and the number of prints for each.
z You cannot set the number of copies for
index prints. You can only choose which
images to print (as shown in Step 2).
z Press the n button to complete the
setting and restore the menu screen.
140
Choosing Images for Printing (DPOF)
Select Range
Choose [Select Range].
z Follow Step 1 on p. 140 to choose [Select
Range], then press the m button.
Choose images.
z Follow Steps 2 and 3 on p. 118 to choose
images.
Make print settings.
then press the m button.
Set All Images to Print Once
ChSeleAll Images].
FolStep 1 on p. 140 to choose [Select
ll Imges], then press the m button.
ke print settings.
press the m button.
Clearing All Selections
Choose [Clear All Selections].
z Follow Step 1 on p. 140 to choose [Clear
All Selections], then press the m button.
All selections will be cleared.
z Press the qr buttons to choose [OK], then
press the m button.
141
Choosing Images for Printing (DPOF)
Printing chosen images (DPOF)
• When there are images added to the print list
(pp. 139 – 141), the screen on the left will appear
when you connect the camera to a PictBridge
compliant printer. Press the op buttons to
choose [Print now], then press the m button to
easily print images added to the print list.
• If you stop the printer during printing and start
again, it will start from the next print.
142
Changing Camera Settings
You can customize convenient and commonly used functions from the 3 tab
(p. 46).
Changing Sounds
You can change each of the camera’s operation sounds.
z Choose [Sound Options], then press the
m button.
z Press the op buttons to choose a menu
item.
z Press the qr buttons to choose an option.
Preset sounds
(cannot be mdified)
1
Preset und
2
You can usincluded software to
the sods (p. 2).
You cannot change the settin
.
Turning Off Hints &
When you choose aitem in he FUNC. menu (p. 45) or MENU (p. 46), a
description of the funcn (nts and tips) is displayed. You can turn off this
function.
z Choose [Hints & Tips], then press the qr
buttons to choose [Off].
144
Changing Camera Settings
Low Level Memory Card Formatting
Perform low level formatting when [Memory card error] appears, the camera
does not operate properly, you think that the recording/reading speed of a
memory card has dropped, or recording suddenly stops while shooting a
movie. As you cannot retrieve the erased data, exercise adequate caution
before formatting the memory card.
Choose [Low Level Format].
z Choose [Format], then press the m
button.
z Press the op buttons to choose [Low
Level Format], then press the qr buttons
to display
z Press the qr buttons to choose [OK],
thess thm button.
Stalow level format.
resthe op buttons to choose [OK],
en pess the m button.
ow level formatting starts.
X When low level formatting ends, [Memory
card formatting complete] will appear on
the screen.
Complete the low level format.
z Press the m button.
• Low level formatting may take longer than standard formatting (p. 21),
since all recorded data is erased.
• You can stop a low level format of a memory card by choosing [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
145
Changing Camera Settings
Changing the Start-up Screen
You can change the start-up screen that appears when you turn on the
camera.
z Choose [Start-up Image], then press the
m button.
z Press the qr buttons to choose an option.
No start-up image
Preset images
1
(cannot be modified)
Preset images
2
You can set recorded images, and use the
included softre to change the images.
Registering Recorded Imaes as he Start-up
Screen
When you press the 1 button the mera to Playback mode, you can
register an image.
z ose [Start-up Image], then press the
m button.
z Press the qr buttons to choose [2], then
press the m button.
z Press the qr buttons to choose an image,
then press the m button.
z Press the qr buttons to choose [OK], then
press the m button to complete
registration.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
146
Changing Camera Settings
Register the start-up image or sounds with the included
software
The dedicated operation sounds and start-up images on the included software
can be registered to the camera. Refer to the Software Guide for details.
Changing the File Number Assignment
Images you shoot are automatically assigned file numbers in the order they
were taken, from 0001 – 9999, and saved to folders of up to 2,000 images.
You can change the file number assignment.
z Choose [File Numbering], then press the
qr buttons to choose an option.
en if you shoot using a new
mory card, the file numbers are
us aigned consecutively until an
imae with the number 9999 is
taken/saved.
If you replace the memory card
created, file numbering begins
to Reset
with 0001 again.
• If you use a emy card already containing images, the newly assigned
file numbers may continue the existing numbering for both [Continuous]
and [Auto Reset]. If you want to start over with file number 0001, format
the memory card before use (p. 21).
• Refer to the Software Guide for information regarding folder structure or
image types.
147
Changing Camera Settings
Creating Folders by Shooting Date
Images are saved into folders created each month, however, you can also
create folders by shooting date.
z Choose [Create Folder], then press the
qr buttons to choose [Daily].
z Images will be saved into folders created
on each shooting date.
Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 nutafter pressing the 1
button when in a Shooting mode (p. 26). ou wahe lens to retract
immediately when you press the 1 bt the rract time to [0 sec.].
ose Lens Retract], then press the qr
ns tchoose [0 sec.].
Turning Off the Power Saving Function
You can set the power saving function (p. 51) to [Off]. Setting it to [On] is
recommended to save battery power.
z Choose [Power Saving], then press the m
button.
z Press the op buttons to choose [Auto
Power Down], then press the qr buttons
to choose [Off].
z If you set the power saving function to
[Off], be sure to turn the camera off after
use.
148
Changing Camera Settings
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 51). This
also works when [Auto Power Down] is set to [Off].
z Choose [Power Saving], then press the m
button.
z Press the op buttons to choose [Display
Off], then use the qr buttons to choose a
time.
z In order to save battery power, you should
choose less than [1 min.].
Using the World Clock
When traveling abroad, you can record imas ith local dates and times
simply by switching the time zone s. If you re-register the destination
time zones, you can enjoy the cone of noaving to switch the Date/
Time settings.
the home time zone.
Choose [Time Zone], then press the m
button.
z When setting this for the first time, check
the information that displays on the screen
at the left, then press the m button.
z Press the qr buttons to choose the home
time zone.
z To set daylight saving time (adds 1 hour),
press the op buttons to choose
z Press the m button.
.
149
Changing Camera Settings
Set the world time zone.
z Press the op buttons to choose
[
World], then press the m button.
z Press the qr buttons to choose the world
time zone.
z You can also set the daylight saving time
as in Step 1.
Choose the world time zone.
z Press the op buttons to choose
[
World], then press the n button.
will appear othe shooting screen
X
(p. 163).
If you change the date or n the
setting (p. 18), your [
Home]
time and date will automang.
150
If you set the mode dial to G, you can change the settings in the 4 tab
(p. 46).
Before attempting to shoot using a function explained in this section in
modes other than G, check if the function is available in those modes
(pp. 168 – 175).
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
z Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
Turning Off the Re Reduction Function
The red-eye redction lamp order to reduce the red-eye effect that
occurs when shting in dark cnditions with the flash. You can turn off this
function.
z Choose [Flash Settings], then press the
m button.
z Press the op buttons to choose [Red-
Eye Lamp], then press the qr buttons to
choose [Off].
151
Changing Shooting Function Settings
Changing the Image Display Time Right After
Shooting
You can change the length of time the images display right after shooting.
z Choose [Review], then press the qr
buttons to choose an option.
Displays images for the set time.
2 – 10 sec.
The image displays until you press
the shutter button halfway.
Hold
Images will not display.
Off
Changing the Way the Image Dislays Right After
Shooting
You can change the way the image diight afr shooting.
oosReview Info], then press the qr
ns tchoose an option.
Displays the image only.
Displays detailed information
(p. 165).
Detailed
The area inside the AF frame is
magnified, allowing you to check
Focus Check the focus. The procedure is the
same as in “Checking the Focus”
(p. 113).
152
Changing Shooting Function Settings
Displaying the Overlay
You can display grid lines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for 3.5" x 5" and postcard size prints.
z Choose [Disp. Overlay], then press the qr
buttons to choose an option.
Off
–
Grid Lines
A grid overlays the screen.
Gray bars appear on the top and
bottom of the screen. This area
will not print when printing on
paper with a 3:2 aspect ratio.
3:2 Guide
Both
th grid lines, and the 3:2 guide
pear.
• In
, you cannot set [3:2 G[Both].
• Grid lines will not be rded e image.
• The gray areas disth [Guide] are the areas that will not be
printed. The actuaordewill include the portion in the gray
areas.
153
Changing Playback Function Settings
You can adjust the settings in the 1 tab by pressing the 1 button (p. 46).
Choosing the Image that First Displays in
Playback
z Choose [Resume], then press the qr
buttons to choose an option.
Resumes with the image last
Last seen
viewed.
Resumes with the most recently
shot image.
Last shot
Turning off the Auto Rotate Function
When you play back images on the camera, imgeshot in vertical
orientation automatically rotate and disperticalYou can turn off this
function.
ct [uto Rotate], then press the qr
ns to select [Off].
• Images cannot be rotated (p. 125) if you have set [Auto Rotate] to [Off].
Rotated images will also appear in their original orientation.
• In Smart Shuffle (p. 114), even if [Auto Rotate] is set to [Off], images
taken vertically will be displayed vertically, while rotated images will
appear in their rotated orientation.
154
Replacing the Date/Time Battery
The life of the date/time battery (back-up battery) is approximately 7 years. If
replace the date/time battery with a new one (CR1220).
Turn off the camera.
Open the cover and remove the AA
batteries (p. 14).
Remove the date/time battery
holder.
Replae batty.
(-)
ert battery with (+) and (-) sides
ted orrectly.
(+)
Insert the battery holder.
Insert the batteries and close the
cover.
Turn on the camera and set the
date/time (p. 18).
156
Using Household Power
If you use AC Adapter Kit ACK800 (sold separately), you can use the camera
without worrying about how much charge is left in the battery.
Turn off the camera.
Plug the cord into the camera.
z Open the cover and fully insert the plug
into the camera.
Connect the power cord.
z Connect the power cord to the compact
power adaptethen plug the other end into
a power ole
z Te cama on to use it.
z Afinish, rn off the camera and
unthe power cord from the power
utle
Do not unug the plug cord with the camera turned on. This could
erase imas you have tan or damage the camera.
157
Troubleshooting
If you think there is a problem with the camera, first check the following. If the
Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
• Confirm that the batteries are the correct type, and is not depleted (p. 16).
• Confirm that the batteries are properly inserted (p. 15).
• Confirm that the memory card/battery cover is securely closed (p. 15).
• If the battery terminals are dirty, battery performance will decrease. Clean the terminals
with a cotton swab and re-insert the batteries several times.
Batteries are consumed quickly.
• Battery performance decreases at low temperatures. Warm the batteries, for example,
by placing them in your pocket, taking care that the termials do not come into contact
with any metal objects.
Lens will not retract.
• Do not open the memory card/battery covhe powis on. After closing the
memory card/battery cover, turn the power back off . 15).
TV output
Shooting
Cannot shoot.
• Set the mode dial to a Shooting mode (p. 41).
• When in Playback mode (p. 20), press the shutter button halfway (p. 22).
The screen is off (p. 25).
Screen does not display properly in dark places (p. 44).
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded in movies.
• When the camera is subjected to powerful light sources, the display may darken.
screen.
The screen turns off and you cannot shoot when you press the shutter button
(p. 25).
appears when the shutter button is pressed halfway (p. 54).
• Set the flash to h (p. 81).
• Increase the ISO speed (p. 83).
• Attach the camera to a tripod.
158
Troubleshooting
Image is blurred.
Press the shutter button halfway to focus on the subject, then press fully to shoot (p. 22).
•
• Shoot the subject within the focusing distance (p. 178).
• Set the [AF-assist Beam] to [On] (p. 151).
• Confirm that functions which you do not intend to use (macro, etc.) are not set.
• Shoot using the focus lock or AF lock (pp. 89, 92).
Even when you press the shutter button halfway, the AF frame does not
appear, and the camera does not focus.
• If you center on the light and dark contrasting area of the subject and push the shutter
button halfway, or repeatedly push the shutter button halfway, the AF frame will appear
and the camera will focus.
Subject is too dark.
• Set the flash to h (p. 81).
• Correct the brightness with exposure compensation . 81).
• Adjust the image with i-Contrast (pp. 84, 129).
• Use spot metering or AE Lock to shoot (pp. 95, 9
Subject is too bright (overexposed
• Set the flash to ! (p. 54).
• Correct the brightness with comnsation (p. 81).
• Use spot metering or AE Lo(pp5, 96).
Image is dark en though tfired (p. 25).
• Shoot within an aropriate distance for flash photography (p. 81).
• Increase the ISO sed (p3).
Image taken using the flash is too bright (overexposed).
• Shoot within an appropriate distance for flash photography (p. 81).
• Set the flash to ! (p. 54).
Image appears rough or grainy.
• Shoot with the ISO speed on a lower setting (p. 83).
• Depending on the Shooting mode, when shooting in a high ISO speed the image may
appear rough or grainy (pp. 65, 66).
Eyes appear red (p. 98).
• Set the [Red-Eye Lamp] to [On] (p. 151). When shooting with the flash, the lamp (on the
front of the camera) lights (p. 40), and for approximately 1 second while the camera is
reducing red-eye, it is not possible to shoot. It is more effective if the subject is looking
directly at the lamp. Even better results can be obtained by increasing the lighting in
indoor settings or approaching closer to the subject.
• Correct images with red-eye correction (p. 130).
159
Troubleshooting
Recording images to the memory card takes a long time, or continuous
shooting slows down.
• Perform a low-level format of the memory card in the camera (p. 145).
Cannot make settings for shooting functions or FUNC. menu.
• The items in which settings can be made differ depending on the shooting mode. Refer
to “Functions Available in Each Shooting Mode” and “Shooting Menu” (pp. 168 – 175).
Cannot operate buttons.
• When the mode dial is set to 9, some buttons cannot be used (p. 28).
Shooting movies
Correct shooting time does not display, or stops.
high speeds. Even when the shooting time does not display properly, the recorded
appeared on the screen and shooting endd aomatically.
The camera’s internal memory was insufficient. Try one e following:
• Perform a low-level format of the memory he cama (p. 145).
• Change the image quality setting (p. 104).
• Use a memory card capable of rg at speeds (p. 104).
Zoom does not operate (p. 1
Playback
Cannot play back imges or movies.
• If the file name or foldestructis changed on a computer, you may not be able to
play back images or movefer to the Software Guide for information regarding
folder structure or file names.
Playback stops, or audio cuts out.
•
Use a memory card that has had a low-level format performed on it with this camera (p. 145).
• If you copy a movie to a memory card that reads slowly, playback may interrupt
momentarily.
• Depending on its capabilities, when playing movies on a computer, frames may drop or
the audio may cut out.
Cannot operate buttons.
• When the mode dial is set to 9, some buttons cannot be used (p. 28).
Computer
Cannot transfer images to a computer.
It may be possible to solve the problem when the camera is connected to a computer via
cable by reducing the transfer speed.
• Press the 1 button to enter Playback mode. Then press and hold the n button
and press the o and m buttons together. In the screen that appears, press the qr
buttons to choose [B] and press the m button.
160
List of Messages That Appear on the Screen
No memory card
• The memory card is not installed in the correct direction. Install the memory card in the
correct direction (p. 15).
Memory card locked
• The SD memory card, SDHC memory card or SDXC memory card’s write protect tab is
set to “LOCK”. Unlock the write protect tab (pp. 14, 15).
Cannot record!
correct direction to shoot (p. 15).
Memory card error (p. 145)
correct direction, contact a Canon Customer Support Help Desk (p. 15).
Insufficient space on card
edit images (pp. 126 – 130). Erase the ims (pp. 120) to open space for new
images, or insert an empty memory c).
Change the batteries (p. 16)
No Image.
• There are no imagerecordemocard that can be displayed.
Protected! (p. 1)
Unidentified Imae/Incompatible JPEG/Image too large./Cannot play back
AVI/RAW
• Unsupported images, omages with corrupted data cannot be displayed.
Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot
rotate/Cannot modify image/Cannot register this image!/Cannot modify/
Cannot assign to category/Unselectable image.
• Incompatible images cannot be magnified (p. 114), played back in Smart Shuffle
(p. 139).
• Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not be magnified, played back in Smart Shuffle,
tagged as favorites, rotated, edited, registered to the start-up screen, categorized, or
added to a print list.
• Movies cannot be magnified (p. 114), played back in Smart Shuffle (p. 114), edited
(pp. 126 – 130), added to a print list (p. 139), or registered to the start-up screen
(p. 146).
161
List of Messages That Appear on the Screen
Invalid selection range
starting image that was after the last image or you tried to choose an ending image that
was before the starting image.
Exceeded selection limit
• You chose more than 998 images in print settings. Choose less than 998 images
(p. 140).
• Print settings could not be saved correctly. Reduce the number of selected images and
try again (p. 140).
• You chose 501 or more images in Protect (p. 117), Erase (p. 120), Favorites (p. 122),
My Category (p. 123) or Print Settings (p. 139).
Communication error
• Images could not be transferred to the computer or printed due to the large amount of
card reader to transfer the images. Insert the memory cainto the printer’s card slot to
print.
Naming error!
• The folder or image could not be created bhere is aimage with the same file
name as the folder or image that mera empting to create, or the highest
possible file number has alreadcheIn the 3 menu, change [File
Numbering] to [Auto Reset] (p. at thmemory card (p. 21).
Lens Error
• This error can occur ou hold the leile it is in motion or when using it in a location
with excessive dust oand in e air.
• If this error message coueo appear, contact a Canon Customer Support Help
Desk as there may be a problem with the lens.
A camera error was detected (Error number)
• If an error code appears directly after taking a picture, the shot may not have been
recorded. Check the image in Playback mode.
• If this error code reappears, note the Error number (Exx) and contact a Canon
Customer Support Help Desk as there may be a problem with the camera.
File Error
• Photos from other cameras or images that have been altered using computer software
may not be printable.
Print error
• Check the paper size settings. If this message appears when the settings are correct,
turn the printer off and back on, then make the settings again.
Ink absorber full
• Contact a Canon Customer Support Help Desk for an ink absorber replacement.
162
Information Displayed on the Screen
Shooting (Information Display)
Battery Charge Indicator
(p. 16)
Tim
Date Stamp (p. 57)
ISO Speed (p. 83)
AE Lock (p. 96),
e (p8)
(
Camera Orientatio
White Balance . 82)
My Colors (p. 8
Drive Mode (p. 8
Camera Shake Wang
(p. 25)
Metering Method (p. 95)
Compression (Image
Quality) (p. 61) /
Recording Pixels
(pp. 61, 104)
Aperture Value
Magnification (p. 55) /
(p. 56)
Focusing Range (p. 87),
AF Lock (p. 92)
Shooting Mode (p. 168),
Scene Icon (p. 164)
Flash Mode
Amount (p. 81)
3:2 Guide (p. 153)
i-Contrast (p. 84)
Exposure Shift Bar
(p. 105)
Still Images: Recordable
Shots (p. 62)
Movies: Remaining Time
(p. 104)
Zoom Bar (p. 23)
Blink Detection (p. 99)
(pp. 54, 81, 97)
Red-Eye Correction
(p. 130)
Time Zone (p. 149)
*
: Standard,
: Held vertically
When shooting, the camera detects if it is held vertically or horizontally, and adjusts
settings accordingly for the best shot. It also detects orientation during playback, so you
can hold the camera in either orientation and it will automatically rotate images for
correct viewing. This function may not operate correctly when the camera is pointed
straight up or down.
163
Information Displayed on the Screen
Scene Icons
In A mode, the camera displays an icon for the scene it has determined
and then automatically focuses and selects the optimum settings for subject
brightness and color.
Subject
People
Non-Human Subjects
Icon
Background
Color
With
Strong
Moving Facial
Shadows
When
When
Moving Close
When
Background
Bright
Gray
Backlit
—
Including
Blue Skies
Light Blue
Orange
Backlit
Sunsets
Spotlights
Dark
—
—
Dark Blue
When
Using
Tripod
*
—
*
—
*
Appears when the scene is dark and the camera is attached to a tripod.
164
Information Displayed on the Screen
Playback (Detailed Information Display)
My Category (p. 123)
Shooting Mode (p. 168)
ISO Speed (p. )
Exposure Comnsation
Amount (p. 81),
(p. 105)
White Balance (p. 82)
Histogram (p. 44)
Compression (Image
Quality) (p. 61) /
ber (p. 147)
Shutter Speed
Aperture Value, Image
Quality (Movies) (p. 104)
Flash (p. 81)
i-Contrast (pp. 84, 129)
Focusing Range (p. 87)
File Size (pp. 62, 104)
Pixels (p. 61)
(p. 104)
(pp. 126 – 130)
Protect (p. 117)
Favorites (p. 122)
My Colors (p. 86)
Red-Eye Correction
(pp. 98, 130)
Recording Pixels (pp. 61,
104), MOV (Movies)
Battery Charge Indicator
(p. 16)
Shooting Date and Time
(p. 18)
165
Information Displayed on the Screen
Summary of Movie Control Panel in “Viewing Movies”
(p. 31)
Exit
Playback
Slow motion playback (You can use the qr buttons to adjust the speed. Sound
will not play back.)
Skip backward* (Continues to skip backward if button is held.)
Previous frame (Rewind if you hold down the m button.)
Next frame (Fast forward if you hold down the m button.)
Skip forward* (Continues to skip forward if button is held.)
Edit (p. 107)
*
Appears when connected to a PictBridge cmplit printer (p. 132).
* Displays the frame of approx. 4 sec. befoafter tcurrent frame.
You can skip forward and skip bacuring mie playback by
pressing the qr buttons
166
Handling Precautions
•
•
This camera is a high-precision electronic device. Do not drop it or subject
it to strong impacts.
Never place the camera close to magnets, motors or other devices that
generate strong electromagnetic fields. Exposure to strong magnetic fields
may cause malfunctions or corrupt image data.
•
•
•
If water droplets or dirt become stuck on the camera or screen, wipe with
a dry soft cloth or eyeglass wiper. Do not rub or apply force.
Never use cleaners containing organic solvents to wipe the camera or
screen.
Use a commercially available blower brush to remove dust from the lens.
For stubborn dirt contact a Canon Customer Support Help Desk as listed
on the customer support leaflet supplied with your camera.
When you move the camera rapidly from colto hot temperatures,
condensation may form on the internal or extnal surfaces of the camera.
To avoid condensation, put the camera in aight, resealable plastic bag
and let it adjust to temperature cslowly efore removing it from the
bag.
•
•
If condensation has forthe mera, stop using it immediately, as
continued use may daamra. Remove the batteries and
memory card, nd wait oisture has completely evaporated
before resumg use.
167
Shooting modes
K
G
A
9
I
J
V
Function
Exposure Compensation (p. 81)
—
—
{
{
{
{
{
{
{
{
{
*1
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
*5
{
—
—
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
—
—
—
—
—
Î
$
Delay
Self-Timer (pp. 58, 59, 60)
Custom Timer (p. 60)
Flash (pp. 54, 81, 97)
2
3
*
Shots
*
{
—
h
…
!
4
—
—
*4
{
—
—
—
{
—
—
—
{
—
—
—
{
—
—
—
AE Lock/FE Lock (p. 96)
6
*
AE Lock/Exposure Shift (Movies) (p. 105)
AF Lock (p. 92)
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
Focusing Range (p. 87)
Face Select (p. 94)
e
u
{
{
{
{
{
{
{
{
Screen Display (p. 43)
No Information Display
Information Display
{
{
{
*1 Set in [Dark] and [Light].
*2 Cannot be set to 0 seconds when in modes where the number of shots cannot be set.
*3 Fixed to 1 shot when in modes where the number of shots cannot be set.
*4 Cannot be set, but switches to … depending on the circumstances.
*5 Cannot be set, but switches to … when the flash fires.
*6 FE Lock not available when set to !.
168
Functions Available in Each Shooting Mode
K
w
E
O
P
t
≈
E
—
—
—
—
{
{
—
—
—
—
—
{
{
—
—
—
—
—
{
{
—
—
—
—
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
—
—
—
—
—
—
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
—
{
{
—
{
{
—
{
*5
{
—
{
—
—
—
{
—
—
—
{
—
—
—
{
—
—
—
{
—
—
—
{
—
—
—
{
—
—
{
—
—
—
{
—
—
—
—
—
—
{
—
—
—
{
—
—
—
{
—
—
—
{
—
—
—
{
{
{
{
{
—
—
{
{
{
{
{
{
{
—
—
{
—
—
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
—
—
—
{
{
{
—
—
—
{
{
{
{
—
—
{
{
{
{
—
—
{
{
{
{
—
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
—
{
—
—
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{ Selectable, or set automatically. – Not selectable.
169
Functions Available in Each Shooting Mode
FUNC. Menu
G
K
A
9
I
J
V
Function
{
{
{
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
ISO Speed (p. 83)
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
—
{
—
—
—
—
{
—
—
—
—
—
—
{
{
{
{
{
{
{
{
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
White Balance (p. 82)
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
My Colors (p. 86)
7
7
*
*
{
—
{
—
{
—
{
{
{
—
—
—
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
Drive Mode (p. 85)
W
{
—
—
{
—
—
{
—
—
Metering Method (p. 95)
{
—
—
—
—
—
{
{
{
—
{
—
—
—
—
—
{
{
{
—
{
{
{
—
{
{
{
—
Recording Pixels (p. 61)
{
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
—
—
—
—
{
—
—
—
—
{
{
—
—
—
Compression Ratio
(Image Quality) (p. 61)
Image Quality (Movies)
(p. 104)
*7 White balance is not selectable. *8 Contrast, sharpness and color saturation can be set in 5 levels.
170
Functions Available in Each Shooting Mode
FUNC. Menu
K
w
E
O
P
t
≈
E
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
{
—
—
—
—
—
{
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
—
—
{
—
—
—
{
—
—
—
—
—
—
—
—
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
{
{
—
—
—
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
{
{
—
—
{
—
{
—
—
{
—
—
{
—
—
{
—
—
{
—
—
—
—
—
—
—
—
—
—
{
—
—
—
—
—
—
—
—
—
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
—
—
—
—
—
{
—
—
—
—
—
{
—
—
—
—
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
{
{
—
—
—
{
{
—
—
—
{
{
—
—
—
{
{
—
—
—
{
{
—
—
—
{
{
{
{
{
—
{ Selectable, or set automatically. – Not selectable.
171
Menus
Shooting Modes
K
G
A
9
I
J
V
Function
Face AiAF
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
*2
{
—
—
—
—
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
—
AF Frame (p. 88)
Tracking AF
Center
Normal
Small
Off
—
—
—
AF Frame Size (p. 89)
Digital Zoom (p. 55)
3
*
{
{
{
{
—
{
—
—
—
—
{
—
—
1.5x
2.0x
On
{
{
{
{
{
{
{
{
{
{
—
AF-Point Zoom (p. 91)
Servo AF (p. 93)
Off
{
—
{
{
—
On
Off
On
Off
4
*
{
{
{
{
{
{
{
{
—
{
*5
{
{
{
{
{
{
—
AF-assist Beam (p. 151)
—
—
On
Off
Red-Eye Cor
d-Eye mp
{
{
{
—
{
{
—
Flash Settings
(pp. 98, 151)
Auto
{
—
—
i-Contrast (p. 84)
Review (p. 152)
Off
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
Off
{
{
{
{
{
{
{
{
{
2 sec.
– 10 sec.
Hold
{
—
—
Off
{
—
—
—
Review Info (p. 152)
Blink Detection (p. 99)
Detailed
Focus Check
On
Off
{
*1 Operation differs depending on the shooting mode when faces are not detected.
*2 Only available by pressing o button (p. 25).
*3 Available when the AF frame is set to [Center].
*4 [On] when moving people are detected in A.
*5 [On] when the flash is set to
.
172
Menus
K
w
E
O
P
t
≈
E
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
—
—
—
—
{
—
—
—
—
{
—
—
—
—
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
—
{
{
—
{
{
—
—
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
{
{
{
—
{
{
—
—
—
{
—
—
{
—
—
—
{
—
—
{
—
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
—
{
—
{
—
—
{
—
{
—
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
—
{
{
{
{
{
{
—
{
—
{
{
{
—
{
{
{
—
{
{
{
{
—
—
—
{
—
—
—
—
—
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{ Selectable, or set automatically. – Not selectable.
173
Menus
Shooting Modes
K
G
A
9
I
J
V
Function
Off
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
Grid Lines
3:2 Guide
Both
Disp. Overlay (p. 153)
Off
{
—
—
Date Stamp (p. 57)
Date
Date & Time
174
Menus
K
w
E
O
P
t
≈
E
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
—
—
{
{
{
{
{
—
—
{
{
{
{
{
—
—
{
{
{
{
{
—
—
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
—
—
{
—
—
{
—
—
{
—
—
{ Selectable, or set automatically. – Not selectable.
175
Menus
3 Set up Menu
Item
Content
Ref. Page
p. 47
Mute
On/Off*
Volume
Set all operation sounds (5 levels).
Set the sounds for each camera operation.
On*/Off
p. 48
Sound Options
Hints & Tips
LCD Brightness
Start-up Image
Format
p. 144
p. 144
p. 49
Sets screen brightness (5 levels).
Add an image as a start-up image.
Formats memory card, erasing all data
Continuous*/Auto Reset
p. 146
pp. 21, 145
p. 147
p. 148
p. 148
File Numbering
Create Folder
Lens Retract
Monthly*/Daily
1 min.*/0 sec.
Auto Power Down: On*/O
Display Off: 10, 20 0 sec./or 3 min.
pp. 51, 148,
149
Power Saving
Time Zone
Date/Time
Video System
Language
Reset All
Home*/World
p. 149
p. 19
Date ansetti
NTSC
p. 116
p. 20
oosguae.
Returns default settings.
p. 50
*
Default setting
176
Menus
1 Playback Menu
Item
Content
Ref. Page
p. 114
p. 112
p. 120
p. 117
p. 125
p. 122
p. 123
Smart Shuffle
Slideshow
Erase
Starts Smart Shuffle.
Plays back images automatically.
Erases images (Select, Select Range, All Images).
Protects images (Select, Select Range, All Images).
Rotates images.
Protect
Rotate
Favorites
My Category
Tags or untags images as favorites.
Categorizes images (Select, Select Range).
Corrects dark portions and contrast in still
images.
i-Contrast
p. 129
Red-Eye Correction
Trimming
Corrects red eyes in still imges.
Trims portions of still age
Resizes and sastill ims.
On*/Off
p. 130
p. 127
p. 126
p. 110
p. 154
p. 154
p. 115
Resize
Scroll Display
Auto Rotate
Resume
On*/
Last sot
Faide/Off
Transition
*
Default setting
2 Print Meu
Item
Content
Ref. Page
Displays printing screen (When connected to a
printer).
—
Print
Select Images & Qty.
Select Range
Chooses individual images for printing.
Chooses starting and ending images for printing.
Chooses all images for printing.
Cancels all settings for printing.
Sets the printing style.
p. 140
p. 141
p. 141
p. 141
p. 139
Select All Images
Clear All Selections
Print Settings
177
Specifications
Image Sensor
Camera Effective Pixels..................Approx. 12.1 million pixels
Lens
Focal Length ...................................4x zoom: 5.0 (W) – 20.0 (T) mm
(35mm film equivalent : 28 (W) – 112 (T) mm)
Focusing Range..............................3 cm (1.2 in.) – infinity (W), 80 cm (2.6 ft.) – infinity (T)
Macro 3 – 50 cm (W) (1.2 in. – 1.6 ft. (W))
•
Imaging Processor .............................DIGIC 4
Optical Viewfinder ..............................Real-image zoom viewfinder
LCD Monitor
Type................................................TFT color (wide viewing angle type)
Size.................................................2.7 type
Effective Pixels................................Approx. 230,000 dots
Aspect Ratio....................................4:3
Features..........................................Brightness adjustment (evels)
Focus
Control System ...............................Autofocus(Contius in Auto mode)
AF Frame........................................Face AiAg AF, Cer
Metering System ................................tive, r-weighted average, Spot
Exposure Compensation (Still Imag
Exposure Shift (Movies) ...........1/3-op increments
ISO Speed (Standard Oput Sensitivi
Recommended Exposurndex).........Auto, ISO 80/100/200/400/800/1600
White Balance.............................Auto, Day Light, Cloudy, Tungsten, Fluorescent,
Fluorescent H, Custom
Shutter Speed .....................................1 – 1/1600 sec.
15 – 1/1600 sec. (Total shutter speed range)
Aperture
Type................................................Circular (Used together with ND filter)
f/number..........................................f/2.8 / f/8.0 (W), f/5.9 / f/17 (T)
Flash
Modes .............................................Auto, On, Slow Synchro, Off
Range .............................................30 cm – 4.0 m (W), 50 cm – 2.0 m (T)
(12 in. – 13 ft. (W), 1.6 – 6.6 ft. (T))
178
Specifications
1
Shooting Modes...................................P, Live View Control, Auto, Easy, SCN* , Creative
2
3
Filters* , Discreet, Movie*
*1 Blur Reduction, Portrait, Landscape, Kids&Pets,
4
Smart Shutter* , Low Light, Beach, Foliage, Snow,
Fireworks, Long Shutter
*2 Fish-eye Effect, Miniature Effect, Toy Camera Effect,
Monochrome, Super Vivid, Poster Effect
*3 Standard, Miniature Effect
*4 Smile, Wink Self-timer, Face Self-timer
Digital Zoom ........................................Still images/Movies: Approx. 4.0x (up to approx. 16x in
combination with the optical zoom)
Safety Zoom, Digital tele-converter
Continuous Shooting
Mode ...............................................Normal
Speed (Normal)...............................Approx. 1.0 shots/sec. (In P mode)
Approx. 3.6 shots/s(In Blur Reduction and Low Light
mode)
Number of Shots (Approximate)
(CIPA compliant) .................................Alkaox. 200
NiMH450
Recording Media .......................memcard, SDHC memory card, SDXC memory
MultediaCard, MMCplus card, HC MMCplus card
File Format ............................rule for Camera File system, DPOF (Version 1.1)
iant
Data Type
Still Images.............................Exif 2.3 (JPEG)
Movies.............................................MOV (Image data: H.264; Audio data: Linear PCM
(monaural))
Number of Recording Pixels
Still Images......................................Large: 4000 x 3000, Medium 1: 2816 x 2112, Medium 2:
1600 x 1200, Small: 640 x 480, Widescreen: 4000 x 2248
1
2
Movies.............................................Standard: 1280 x 720 (24 fps* ), 640 x 480 (30 fps* ),
2
320 x 240 (30 fps* )
Miniature Effect 1280 x 720* , 640 x 480*
3
3
*1 Actual frame rate is 23.976 fps
*2 Actual frame rate is 29.97 fps
*3 Shooting: 6 fps, 3 fps, 1.5 fps
2
Playback: 30 fps*
Interface...............................................Hi-Speed USB
Analog audio output (monaural)
Analog video output (NTSC/PAL)
Direct Print Standard ...........................PictBridge
179
Specifications
Power Source......................................AA alkaline batteries (AA NiMH batteries NB-3AH) x 2
Compact Power Adapter CA-PS800
Dimensions (CIPA compliant) .............97.5 x 62.5 x 30.7 mm (3.84 x 2.46 x 1.21 in.)
Weight (CIPA compliant).....................Approx. 185 g (6.53 oz.) (Including the battery and
memory card)
Approx. 137 g (4.83 oz.) (camera body only)
•
•
All data is based on tests by Canon.
Camera specifications or appearance are subject to change without notice.
180
Index
DIGITAL CAMERA Solution Disk ................2
AE Lock .............................................96, 105
AF Frames...........................................24, 88
AF J Focus
AF-Point Zoom ..........................................91
asing Imes..................................27, 120
Battery
Power Saving......................51, 148, 149
Battery and Charger Kit.............................
Blur Reduction (Shong de)
Camera
Center (AF Frame Mode) ..........................89
Clock Functions.........................................51
Compression Ratio (Image Quality) ..........61
File Numbering ........................................147
Slow Synchro......................................97
Focus
D
Date and Time J Date/Time
Date/Time
AF Frames....................................24, 88
AF Lock...............................................92
AF-Point Zoom....................................91
Face Select.........................................94
Servo AF.............................................93
Adding to Image..................................57
Changing ............................................19
Date/Time Battery.............................156
Setting ................................................18
World Clock ......................................149
181
Index
Focus Check ........................................... 113
Focus Lock................................................ 89
Focusing Range
M
Infinity ................................................. 87
Macro.................................................. 87
Foliage (Shooting Mode)........................... 65
Formatting (Memory Card)................ 21, 145
FUNC. Menu
Memory Cards
Shooting Time ....................................30
Basic Operations ................................46
List....................................................172
Basic Operations ................................ 45
List.................................................... 168
G
I
me Rat.....................................104
i-Contrast........................................... 84, 129
Images
Editing J Editing
Playback J Viewing
Protect.................................. 117
Included Items J Accessories
Indicator............................................... 42, 44
Infinity (Focus Mode)................................. 87
ISO Speed......................................... 83, 163
Playback J Viewing
Portrait (Shooting Mode) ...........................64
Poster Effect (Shooting Mode) ..................69
Jump Display........................................... 111
Kids&Pets (Shooting Mode) ...................... 65
L
R
Lamp ................................................. 40, 151
Landscape (Shooting Mode) ..................... 65
LCD Monitor J Screen
Live View Control (Shooting Mode)........... 67
Long Shutter (Shooting Mode) .................. 77
Recording Pixels (Image Size)..................61
Red-Eye Correction........................... 98, 130
Resizing (Making Images Smaller)..........126
Rotate......................................................125
182
S
Screen
Display Language...............................20
Information Display...................163, 165
Menu J FUNC. Menu, Menu
Switching the Display..........................43
SD/SDHC/SDXC Memory Card J Memory
Cards
Magnified Display .............................114
Slideshow .........................................112
Self-Timer
Changing Delay and Number of
Shooting
W
Wrist Strap J Strap
Shooting Date and Time J
Shooting Time................
Smart Shutter (Shooting M).................73
Smile (Shooting Mode)..............................73
Software
Z
DIGITAL CAMERA Solution Disk .........2
Installation...........................................33
Software Guide.....................................2
Transferring Images to a Computer
T
Tag Images as Favorites.........................122
Terminal.............................34, 116, 132, 157
Toy Camera Effect (Shooting Mode).........71
Tracking AF .........................................25, 90
Travel Abroad....................................37, 149
183
MEMO
184
MEMO
185
MEMO
186
MEMO
187
MEMO
188
MEMO
189
MEMO
190
MEMO
191
MEMO
192
MEMO
193
MEMO
194
MEMO
195
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohied.
• Canon reserves the right to change the conntof this guide at any
time without prior notice.
• Illustrations and screenshots in this may difr slightly from the
actual equipment.
• The above items notwithsCann accepts no liability for
damages due to miaken of te products.
CDP-E112-010
© CANON INC. 2011
|