Panasonic Kx Pw708dwe5 User Manual

Facsimile  
Quick Reference Guide  
Model No.  
KX-PW708DLE5  
KX-PW708DWE5  
Main unit:  
KX-PW708  
Portable handset: KX-FKN516  
KX-PW708DLE5  
Thank you for purchasing a Panasonic facsimile.  
Table of Contents  
Finding the controls …………………………………………………………… 2  
Installations and connections ………………………………………………… 4  
Setting the date and time……………………………………………………… 7  
Setting your facsimile telephone number …………………………………… 7  
Setting your logo ……………………………………………………………… 8  
Character input and command key table …………………………………… 9  
Voice guide…………………………………………………………………… 10  
Automatic dialing on the main unit ………………………………………… 11  
Automatic dialing on the portable handset (KX-FKN516) ……………… 12  
Repeat call dialing ………………………………………………………… 13  
Intercom ……………………………………………………………………… 14  
Sending faxes ……………………………………………………………… 15  
Receiving faxes…………………………………………………………… 16  
Operating the built-in answering device ………………………………… 17  
Night mode…………………………………………………………………… 18  
Call block …………………………………………………………………… 19  
Specifications ……………………………………………………Back cover  
This guide explains some basic features and operations, but not all of them.  
For further details, see the Japanese operating instructions.  
This product is designed for use in Japan.  
Panasonic cannot provide service for this product if used outside Japan.  
Any details given in this guide are subject to change without notice.  
This unit is equipped with the voice guide features. (Japanese only)  
For details about voice guide, please see page 10.  
Finding the controls  
Portable handset (KX-FKN516)  
Liquid crystal display  
Earpiece  
How to use  
key  
To use the phonebook.  
To redial the phone  
numbers in the redial  
list. The last 10 phone  
numbers dialed are  
stored in memory.  
Portable handset number  
(and name)  
No link to the main unit  
Function menu that is  
To change Hiragana into  
Kanji.  
To adjust the volume.  
controlled by  
or  
To adjust the ringer  
Battery strength  
volume when the portable  
handset is on stand by  
(Select “呼出音量”)  
How to use  
buttons  
(press  
and  
buttons refer to the function  
repeatedly)  
or  
displayed on the bottom of the display.  
They function differently depending on  
the mode.  
To adjust the receiver  
volume while talking,  
press  
repeatedly  
To adjust the speaker  
Secure button  
While the portable handset is  
ringing, press this button.  
The portable handset  
volume while listening to  
the recorded messages or  
using the speakerphone,  
press  
repeatedly  
announces a message to the  
caller . The message is  
announced in Japanese and  
means “This unit is currently  
set to Caller Verifying mode.  
Could you please speak out  
your name?”  
To make/answer calls.  
To end a call.  
To end or exit from editing or  
other operations.  
To talk to the caller,  
Microphone  
To put a call on hold.  
To start a search in the  
Number Display log.  
(For Number Display  
service users.)  
press  
.
Do not cover the  
microphone while  
talking.  
To hung up, press  
.
Mute button  
To mute your voice to the  
other party by pressing this  
button for about 2 seconds.  
(To release the mute,  
To page the main unit  
and/or portable handset(s).  
press this button again.)  
Dial buttons  
Tone button  
For call waiting service  
users.  
To clear letters/numbers.  
To switch to tone dialing.  
Sharp button  
Key lock button  
To lock the portable handset so that no calls or setings  
can be made. To turn key lock on, press this button for  
about 3 seconds until a single beep is heard.  
To use the speakerphone.  
” is displayed.  
To turn key lock off, press this button for about 3  
seconds until a single beep is heard.  
3
Installations and connections  
Installing the ink film  
1
Open the control panel.  
2
3
Open the back cover.  
Insert the orange  
gear into the left slot  
of the main unit.  
Insert the ink film.  
Insert the white gear into the right slot  
of the main unit.  
If the ink film is slack, tighten it by  
winding this gear (orange).  
4
5
Close the back cover pressing  
” down on both sides  
until it clicks into place.  
6
Close the control panel.  
When the unit runs out of ink film, the following message will be displayed.  
フィルムなし  
U23  
交換してください  
:  
KX-FAN190  
Install a new ink film.  
Replacement ink film:  
KX-FAN190 (15 m)  
KX-FAN190W (15 m X 2)  
KX-FAN191 (15 m) (*1)  
714  
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film  
than does the KX-FAN190/190W.  
1,208  
893  
KX-FAN191W (15 m X 2) (*1) 1,523  
As of October 2008.  
Tax included.  
4
Installations and connections  
Installing recording paper (A4 size)  
1
Open the recording paper tray.  
2
Set up the recording paper stands.  
Pull out the front stand first.  
3
Insert the recording paper into the  
recording paper tray. (Up to 15 sheets)  
Recording paper  
Printing side is  
on the back.  
Fan the stack of recording paper.  
Folding the recording paper tray  
1 Remove the recording paper and fold the recording  
2 Close the recording paper tray.  
paper stands in.  
5
Installations and connections  
Connecting the main unit  
Setting up the portable handset  
(KX-FKN516)  
1
Raise the antenna.  
1
Press  
on the battery cover and slide the cover.  
2
Connect the cord and  
place the handset on  
the main unit.  
2
Insert the battery into the compartment and close the  
battery cover.  
Telephone line cord  
(supplied accessory)  
Wall jack  
Battery  
3
Connect the telephone line cord.  
Power cord  
Power outlet  
(AC 100 V)  
3
Connect the charger to the power outlet, then place  
the portable handset on the charger for about  
10 hours.  
4
Connect the power cord.  
Power outlet  
(AC 100 V)  
After the Power On...  
1 This unit will automatically select the dialing  
mode (Pulse/Tone).  
2 When the following is displayed, press  
(Stop).  
選んでケータイの設定  
If you cannot make a call...  
Set the dialing mode with the main unit.  
1. Press  
2. Press  
3. Press  
(Function/Resolution).  
.
(Search button) repeatedly until the  
desired setting is selected.  
Example :  
Charger  
回線種別  
自動  
After your Panasonic battery is fully charged,  
it will last up to about 5 hours of conversation.  
プッシ: Tone  
20: Pulse (20 PPS)  
10: Pulse (10 PPS)  
: Auto (Default)  
4. Press  
5. Press  
(Set).  
(Stop).  
6
Setting the date and time  
Setting your facsimile  
telephone number  
1
2
Press  
Press  
(Function/Resolution).  
1
Press  
Press  
(Function/Resolution).  
機能登録モード  
機能登録モード  
.
Example :  
2
3
.
日付時刻  
あなたの電話番号  
2
2008  
11  
30  
15  
3 0  
Enter your facsimile telephone number, up to  
20 digits.  
Example: 098 7654··  
Cursor  
+
3
Enter the correct year/month/day.  
Example: December 1, 2008  
Press  
あなたの電話番号  
    
 
+09887654 . .  
.
日付時刻  
The  
(Tone) button replaces  
2008  
12  
01  
the digit with “+”.  
15  
3 0  
1
The  
(Hold/Call memory) button  
4
5
Enter the correct hour/minute in a 24-hour clock entry.  
Example: 15:45 (3:45 PM)  
replaces the digit with a space.  
Press  
.
To correct a mistake, press  
(Secure/Erase).  
日付時刻  
2
2008  
12  
01  
15  
4 5  
4
5
Press  
(Set).  
Press  
(Set).  
登録しました  
登録しました  
日付時刻  
あなたの電話番号  
2
12  
01  
    
 
+09887654 . .  
15  
4 5  
Press  
(Stop).  
6
Press  
(Stop).  
Example :  
Example :  
1
15  
45  
1
15  
45  
  録音  
0
  録音  
0
7
Setting your logo  
Example: Micah  
1. Press  
once.  
名前  
印刷用  
M
Cursor  
2. Press  
six times.  
six times.  
i cah印刷用  
i
M
3. Press  
i ccah印刷用  
M
4. Press  
to move the cursor to the next space  
four times.  
1
2
Press  
Press  
(Function/Resolution).  
and press  
機能登録モード  
i cah印刷用  
a
M
5. Press  
five times.  
.
名前  
印刷用  
名前 漢  
印刷用  
h
M
i c a h  
_
Cursor  
4
5
Press  
(Set).  
登録しました  
3
Enter your logo, up to 30 characters, using the dial  
keypad.  
To enter English characters easily, press  
i cah印刷用  
(Intercom/Edit/Character input mode) repeatedly  
and select “” (English and sign input mode).  
For details, see the table on page 9 for instructions.  
M
M
_
Press  
(Stop).  
Example :  
1
15  
45  
  録音  
0
8
Character input and command key table  
Pressing the dial keys will select a character as shown below.  
Character  
Hiragana  
Katakana  
English  
Numbers  
Display of the  
main unit and the  
portable handset  
[漢]  
[カナ]  
[英]  
[数]  
Dial key  
Portable  
handset  
KX-FKN516  
Main  
unit  
(
)
(
)
あいうえお  
ぁぃぅぇぉ  
アイウエオ  
ァィゥェォ  
^
@ . _ – & $ ¥ % + = ~  
1
かきくけこ  
カキクケコ  
A B C a b c  
D E F d e f  
2
3
4
5
6
7
8
9
さしすせそ  
たちつてとっ  
なにぬねの  
はひふへほ  
まみむめも  
やゆよゃゅょ  
らりるれろ  
サシスセソ  
タチツテトッ  
ナニヌネノ  
ハヒフヘホ  
マミムメモ  
ヤユヨャュョ  
ラリルレロ  
G H I g h i  
J K L j k l  
M N O m n o  
P Q R S p q r s  
T U V t u v  
W X Y Z w x y z  
! ? / ー  
( ) [ ]  「 」  
# ‚ ; : ’ ”  
わをんー!? ( )  
゛°。  
ワヲンー!? ( )  
0
、 。  
Used to change the character input  
mode.  
(Main unit),  
(Portable handset)  
Used to move the cursor to the left  
and right.  
(Main unit),  
(Portable handset)  
Command keys  
Used to delete a character.  
Used to insert a space.  
(Main unit),  
(Main unit),  
(Portable handset)  
(Portable handset)  
The characters on the display are somewhat different from those shown in the character input and command key table.  
9
Voice guide  
Operation guide  
The unit starts the following voice guidance in Japanese:  
Operations  
To cancel the operation guide (using the main unit)  
Send a fax  
(Select  
)
なし  
Copy  
Add entries to the phonebook  
Store entries in the repeat call dialer  
(Select  
)
なし  
Make a call using the phonebook/redial/  
call memory  
(Select  
(Select  
)
なし  
なし  
Change a ink film  
Print fax documents from the main unit  
memory  
)
Reading-out dial  
The unit announces the number dialed in Japanese, when you make a call with the main unit.  
To cancel the reading-out dial  
(Select “なし”)  
Reading-out phonebook  
The unit reads out stored names* when the phonebook is searched.  
To cancel the reading-out phonebook  
(Select “なし”)  
Incoming name announcement (for Number Display service  
subscribers only)  
The unit announces the caller’s name* when a call is received from a caller whose name and phone number are  
stored in the phonebook.  
To cancel the incoming name announcement  
(Select “なし”)  
* Names will only be read out when their “ フリガナ ” (readings) are stored in katakana in the phonebook.  
English, numbers and signs in “ フリガナ ” are not read out.  
10  
Automatic dialing on the main unit  
Storing names and telephone  
numbers in the phonebook  
Making a voice call using the  
phonebook  
1
2
Press  
(Phonebook).  
Press  
(Search button) repeatedly until the  
desired name is displayed.  
3
Lift the handset.  
Editing a stored name or number  
in the phonebook  
1
Press  
(Phonebook).  
1
Press  
(Phonebook).  
“XXX” shows the remaining  
station numbers you can  
store.  
電話帳空き XXX  
登録は[ 決定 ]押  
2
Press  
(Search button) repeatedly until the  
検索は[ , ]押  
desired name is displayed.  
You can program up to  
150 stations, including  
4 pre-programmed stations.  
3
4
Press  
(Intercom/Edit/Character input mode).  
2
3
Press  
(Set).  
Edit the name (see the table on page 9 for  
instructions).  
名前  
_
If you do not need to edit the name, skip to step 5.  
5
6
Press  
(Set).  
Enter the name, up to 20 characters (see the table on  
page 9 for instructions).  
Edit the kana.  
If you do not need to edit the kana, skip to step 7.  
4
5
Press  
(Set) 2 times.  
7
8
Press  
(Set).  
Enter the telephone number, up to 24 digits.  
To correct a mistake, press  
(Secure/Erase).  
Edit the telephone number.  
If you do not need to edit the telephone number,  
skip to step 9.  
6
7
8
Press  
(Set).  
9
Press  
(Set).  
Enter the group number (  
to  
).  
10 Edit the group number.  
Press  
(Set).  
If you do not need to edit the group number,  
To program other items, repeat steps 3 to 8.  
skip to step 11.  
11 Press  
(Set).  
9
Press  
(Stop) to exit the program.  
12 Press  
(Stop).  
11  
Automatic dialing on the portable handset (KX-FKN516)  
Storing names and telephone  
numbers in the phonebook  
Making a voice call using the  
phonebook  
1
2
Press  
(Phonebook).  
Press  
(Search button) repeatedly until the  
desired name is displayed.  
3
Press (Talk).  
Editing a stored name or number  
in the phonebook  
1
2
Press  
(Phonebook).  
1
2
Press  
(Phonebook).  
検索は  
す  
,
Press  
(Search button) repeatedly until the  
desired name is displayed.  
Press  
.
“XXX” shows the remaining  
station numbers you can  
store.  
名前  
3
Press  
.
空き ×××  
4
Edit the name (see the table on page 9 for  
instructions).  
You can program up to  
150 stations, including  
4 pre-programmed stations.  
If you do not need to edit the name, skip to step 5.  
5
6
Press  
.
3
Enter the name, up to 20 characters (see the table on  
page 9 for instructions).  
Edit the kana.  
If you do not need to edit the kana, skip to step 7.  
4
5
Press  
2 times.  
7
8
Press  
.
Enter the telephone number, up to 24 digits.  
To correct a mistake, press  
(Flash/Erase).  
Enter the correct telephone number.  
If you do not need to edit the telephone number,  
6
7
8
Press  
.
skip to step 9.  
Enter the group number (  
to  
).  
9
Press  
.
Press  
.
10 Edit the group number.  
To program other items, repeat steps 3 to 8.  
If you do not need to edit the group number, skip to  
step 11.  
9
Press  
(Off) to exit the program.  
11 Press  
.
12 Press  
(Off) to exit the program.  
12  
Repeat call dialing  
When you make a call using the repeat call dialer and the recipient’s line is busy, the unit will automatically redial the  
number up to 15 times at 30-second intervals.  
Storing telephone numbers in the  
repeat call dialer  
Making a voice call using the  
repeat call dialer  
You can store up to 3 telephone numbers for the repeat  
call dialer. The dialing buttons (  
memory stations.  
to  
) function as  
1
2
Press  
(Repeat call).  
Press the memory station number (  
to  
).  
If the line is busy, the unit redials the number up to  
15 times automatically.  
3
When the other party answers, lift the handset.  
Editing a stored telephone  
number in the repeat call dialer  
1
2
Press  
(Function/Resolution).  
Press  
(Repeat call) and the memory station  
1
2
Press  
Press  
(Function/Resolution).  
(Repeat call).  
number (  
to  
).  
機能登録モード  
3
4
Move the cursor to the number you want to edit and  
press (Secure/Erase).  
くり返しコール番号?  
Enter the correct number, then press  
(Set).  
      
[
1
-
3
]
5
Press  
(Stop) to exit the program.  
3
4
Press the memory station number (  
to  
).  
くり返しコールが  
登録されて  
いません  
Erasing a stored telephone  
number in the repeat call dialer  
Enter the telephone number, up to 24 digits.  
1
2
Press  
(Function/Resolution).  
To correct a mistake, press  
Example:  
(Secure/Erase).  
電話番号  
Press  
(Repeat call) and the memory station  
0987654  
number (  
to  
).  
5
6
Press  
Press  
(Set).  
3
4
Press  
(Secure/Erase) for more than 2  
seconds, then press  
(Set).  
(Stop) to exit the program.  
Press (Stop) to exit the program.  
13  
Intercom  
An intercom is available between the portable handsets or between the main unit and portable handset(s).  
Using the main unit:  
Using the portable handset (KX-FKN516):  
1
For single portable handset users  
1
For single portable handset users  
Press (Intercom).  
1 Lift the handset.  
電話番号  
For multiple portable handset users  
1 Press (Intercom).  
2 Press  
(Intercom/Edit/Character input  
mode).  
2 Call the main unit and/or portable handset(s) in  
the following ways:  
子機1呼出中  
To call a specific portable handset, press the  
portable handset number (  
you want to call.  
to  
) which  
For multiple portable handset users  
1 Lift the handset.  
To call the main unit, press  
.
To call the main unit and all the portable  
handsets, press  
2 Press  
(Intercom/Edit/Character input  
.
mode).  
3
Call the portable handset(s) in the following ways:  
To call a specific portable handset, press the  
2
3
Start talking.  
内線通話中  
portable handset number (  
you want to call.  
To call all the portable handsets, press  
to  
) which  
.
Press  
(Off) to end the intercom call.  
2
3
Start talking.  
Example :  
子機1内線通話中  
Replace the handset to end the intercom call.  
14  
Sending faxes  
Sending a fax manually  
Sending a fax using automatic  
dialing  
Document  
Document cover  
Document  
FACE UP  
Document  
guides  
FACE UP  
Using the phonebook  
1
2
3
Open the document cover, and adjust the width of the  
document guides to the size of the document.  
1
Insert the document (up to 5 pages) FACE UP until a  
single beep is heard.  
Insert the document (up to 5 pages) FACE UP until a  
single beep is heard.  
2
3
Press  
(Phonebook).  
Press  
(Search button) repeatedly until the  
If necessary, press  
repeatedly to select the  
desired name is displayed.  
desired resolution while “画 質=” is displayed  
(see below).  
4
Press  
(Fax).  
The unit will start fax transmission.  
4
5
6
Press  
(Fax).  
Using the repeat call dialer  
Dial the fax number.  
1
Insert the document (up to 5 pages) FACE UP until a  
single beep is heard.  
Press  
(Fax).  
The unit will start fax transmission.  
2
3
Press  
(Repeat call).  
Press the memory station number (  
to  
).  
The unit will start fax transmission.  
To select the resolution  
Select the desired resolution according to the type of document, by pressing  
To display “画 質=”, press (Function/Resolution) once or twice.  
repeatedly while “画 質=” is displayed.  
(Standard) for printed or typewritten originals with normal-sized characters.  
(Fine) for originals with minute printing.  
画 質  
画 質  
画 質  
ふつう字  
小さい字  
(Photo) for originals containing photographs.  
写真  
15  
Receiving faxes  
Receiving a fax manually  
(AUTO ANSWER off)  
2
When:  
– document reception is required,  
– a fax calling tone (slow beep) is heard, or  
– no sound is heard,  
Using the main unit:  
press  
.
3
4
Press  
(Search button) repeatedly until the  
” is displayed, then press  
ファクス受信  
.
Press  
.
The main unit will start fax reception.  
1
2
When you hear a ring, lift the handset to answer the  
call.  
Receiving a fax automatically  
(AUTO ANSWER on)  
When:  
– document reception is required,  
– a fax calling tone (slow beep) is heard, or  
– no sound is heard,  
light on  
press  
(Fax), then replace the handset.  
The unit will start fax reception.  
Using the portable handset (KX-FKN516):  
1
2
If the  
(Auto answer) light is off, turn it on by  
pressing  
.
When receiving a call, the unit will receive a fax  
document or record a voice message automatically  
depending on the caller’s request.  
1
When you hear a ring, lift the portable handset from  
the charger, then press (Talk) to answer the call.  
16  
Operating the built-in answering device  
Recording your own greeting  
message  
Activating the answering device  
1
2
Turn the  
(Auto answer) light on by pressing  
.
light on/  
flash  
When receiving a call, a greeting message will be  
played and the unit will record a voice message.  
To record your own greeting message, see left.  
Listening to recorded messages  
When new messages are recorded, the  
(Auto  
answer) light will flash.  
Press  
to listen to recorded messages.  
You can record your own greeting message. When  
receiving a call, it will be played to callers instead of the  
pre-recorded Japanese greeting message.  
After the messages are played back, the following will be  
displayed.  
再生した用件を  
消去しますか?  
To erase the messages, press  
To save the messages, press  
.
.
はい  
 いいえ  
=#  
1
2
Press  
Press  
(Function/Resolution).  
.
Listening to all of the recorded  
messages  
自作応答録音  
Press  
recorded.  
(Playback) when new messages are not  
    []  
3
4
5
Press  
(Set).  
When new messages are recorded, only the new  
messages will be played back.  
Lift the handset.  
After all of the recorded messages are played back, the  
following will be displayed.  
Press  
(Set) and speak your greeting message  
To erase the messages, press  
.
すべて  
after a beep, up to 16 seconds, to the handset.  
消去しますか?  
To save the messages, press  
.
はい  
 いいえ  
=#  
6
Press  
(Stop) and replace the handset.  
Erasing a specific message  
Your greeting message will be played back  
automatically.  
Press  
(Secure/Erase) while listening to the  
message you want to erase, then press  
.
Erasing your own greeting  
message  
Erasing all of the recorded  
messages  
1
2
Press  
Press  
(Function/Resolution).  
.
1
2
Press  
Press  
(Function/Resolution).  
.
用件全消去  
自作応答消去  
    []  
    []  
3
4
Press  
Press  
(Set).  
3
4
Press  
(Set).  
.
Press  
.
The pre-recorded Japanese greeting message will  
be played when you receive a call.  
17  
Night mode  
Operating the built-in  
answering device  
Turn on the night mode  
Operating the answering device  
from a remote location  
light on  
Press  
(Night mode) for about 3 seconds.  
“ ”  
is displayed and  
lights on.  
Preparation: Programming the remote operation ID  
When a call is received during night mode, the unit  
will handle the call silently, either by storing the  
received fax into memory or by recording the caller’s  
message.  
1. Press  
(Function/Resolution).  
2. Press  
.
3. Enter any 4-digit number (remote operation ID) except  
Night mode allows you to select a block of time  
during which the unit will not ring for outside calls  
or make sounds when you change the settings.  
This feature is useful when you do not want to be  
disturbed, for example, while sleeping.  
or #.  
Example :  
留守電暗証番号  
234  
1
4. Press  
(Set).  
5. Press  
(Stop).  
Listening to recorded messages  
When new messages are recorded, the following will be  
displayed.  
新しい用件が  
Operation: Listening to a recorded message from a  
remote location  
録音されました  
Press  
(Playback) to listen to recorded messages.  
After the messages are played back, the following will be  
displayed.  
Turn the  
(Auto answer) light on before you go out.  
Remote operations are available only from a touch tone  
telephone.  
再生した用件を  
消去しますか?  
To erase the messages, press  
To save the messages, press  
.
.
1. Call your unit.  
2. Enter the remote operation ID during the greeting  
はい  
 いいえ  
=#  
message.  
Printing received fax documents  
2
3. Press or wait 4 seconds.  
When new faxes are received, the following will be  
Only the new recorded messages will be played  
displayed.  
ファクスが  
届いています  
back.  
4
To listen to all the recorded messages, press after  
印刷は[決定]押  
the new messages have been played back.  
Press  
(Set) 2 times to print fax documents.  
Turn off the night mode  
Press  
(Night mode) for about 3 seconds.  
18  
Call block  
Blocking the incoming calls  
Using the main unit:  
Using the portable handset (KX-FKN516):  
To block a call using a message  
To block a call using a message  
While the unit is ringing, press  
OR  
(Block).  
While the unit is ringing, press  
2 times.  
OR  
While you are on an incoming call,  
While you are on an incoming call, press  
(Block),  
then press  
.
1
2
Press  
Press  
.
The unit announces a message to the caller  
2 times, then hangs up automatically. The message  
is announced in Japanese and means  
(Search button) repeatedly until “通話拒否”  
is displayed.  
“We’re sorry, but your call cannot be connected..  
3
Press  
2 times.  
The unit announces a message to the caller  
2 times, then hangs up automatically. The message  
is announced in Japanese and means  
To block a call using chimes  
“We’re sorry, but your call cannot be connected..  
To block a call using chimes  
1
2
While you are on an incoming call, press  
(Block).  
1
2
While you are on an incoming call, press  
.
Press  
.
Press  
(Search button) repeatedly until “通話拒否”  
Chimes are heard by the caller.  
is displayed, then press  
.
3
Explain to the caller that a visitor came and hang up.  
3
4
Press  
(Search button) repeatedly until “チャイム” is  
displayed, then press  
.
Explain to the caller that a visitor came and hang up.  
For Number Display service subscribers  
If you subscribe to Number Display service, the message heard by the caller will change according to the caller’s  
situation.  
Example : If the caller requested not to send caller’s information, the message heard by the caller will change to mean  
Your phone number is blocked by service provider. Please call again with adding ‘186’ to the beginning of  
the phone number..  
When the following is displayed after blocking an incoming call, you can set the unit to block the call from the same  
telephone number.  
Using the main unit:  
Using the portable handswet:  
迷惑設定  
To block the call, press  
.
迷惑設定  
しますか  
To block the call, press  
.
しますか?  
To cancel blocking, press  
.
To cancel blocking, press  
.
はい  
 いいえ  
=#  
=#  
When the following is displayed, press  
to cancel.  
When the following is displayed,  
press to cancel.  
拒否設定  
しますか  
拒否設定  
しますか?  
はい  
 いいえ  
19  
Specifications  
KX-PW708DLE5  
KX-PW708DWE5  
Main unit  
Portable handset (KX-FKN516)  
Battery charger  
Ni-MH battery  
Power supply  
AC 100 V (50 Hz/60 Hz)  
(Part no. KX-FAN51)  
DC 3.6 V, 650 mAh  
AC 100 V (50 Hz/60 Hz)  
Transmission: Approx. 10 W  
•ꢀCharging:  
Reception:  
Copy:  
Stand by:  
Approx. 13 W  
Approx. 16 W  
Approx. 0.7 W  
Approx. 1.2 W  
•ꢀStandꢀby:  
Power  
consumption  
Approx. 0.5 W  
(When the F-net service is not in use.)  
Maximum(*1): Approx. 130 W  
(When the portable handset  
is off the charger.)  
Approx. 86 X 296 X 191 mm  
(without handset, projections)  
Approx. 265 X 296 X 231 mm  
(recording paper tray opened,  
without handset, projections)  
Dimensions  
(H x W x D)  
Approx. 171 X 44.5 X 33.5 mm Approx. 34 X 72.5 X 100.5 mm  
Approx. 2.4 kg  
(10 m ink film installed)  
Approx. 157 g  
Approx. 160 g  
(battery installed)  
Mass (Weight)  
Operating  
environment  
5 °C – 35 °C, 45 % – 85 % RH (Relative Humidity)  
KX-PW708DLE5  
KX-PW708DWE5  
Applicable line  
Main unit  
Public Switch Telephone Network (Pulse/Tone), F-Net, NCC Lines  
DC resistance  
275 W  
Compatibility  
G3 compatible  
Document size  
A4–A5 (Max. 210 mm in width, Max. 600 mm in length)  
208 mm (A4)  
Effective scanning size  
Effective printing size  
Transmission time  
Modem speed  
202 mm (A4 size plain paper)  
Approx. 15 s/page (Original mode) (*2)  
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic fallback  
64-level  
Halftone level  
Horizontal: 8 pels/mm  
Vertical : 7.7 lines/mm (Fine/Photo), 3.85 lines/mm (Standard)  
Scanning density  
Scanner type  
Contact image sensor  
Printer type  
Thermal transfer printing on plain paper  
Modified Huffman (MH), Original mode  
A4: 210 mm x 297 mm (Plain paper)  
Data compression system  
Recording paper size  
Greeting message: Digital recording system (up to 16 sec)  
Pre-recording greeting message  
Answering device  
Memory capacity  
ICM Recording:  
Digital recording system (Approx. 12 min. in total) (*3)  
Max. Approx. 50 pages (Only receiving fax etc.) (*4)  
Max. Approx. 12 min. (Only recording message) (*3)  
*1 When copying a 100 % black document.  
*2 Transmission speed is based on an A4-size document of 700 characters sent in standard resolution at 9,600 bps. The  
actual transmission speed depends upon the contents of the page, resolution, telephone line conditions and capability  
of the other party’s machine.  
*3 If there is a silent pause, the total recording time will be longer.  
*4 The memory capacity is based on an A4-size document of 700 characters sent in standard resolution  
(8 x 3.85 lines/mm).  
C
Panasonic Communications Co., Ltd. 2008  
PNQX1850ZA FK1008FG0  

Mitsubishi Electronics Msz Ga25va User Manual
Mitsubishi Electronics Pe 8myc User Manual
Panasonic Cw C101mu User Manual
Philips 32pw9551 User Manual
Ricoh Mp 5001 User Manual
Sanyo 42tw72r User Manual
Sanyo Chdx14053 User Manual
Sears 20071310 User Manual
Sharp Ar M300u User Manual
Xantrex Technology Ip1012 Al User Manual