Yamaha Stereo Receiver DSP AX757SE User Manual

RX-V757

AV Receiver

DSP-AX757SE

AV Amplifier

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

Download from Www.Somanuals.com. All Manuals Search And Download.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

To assure the finest performance, please read this

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

manual carefully. Keep it in

reference.

safe place for future

Install this sound system in

a well ventilated, cool,

dry, clean place

–

away from direct sunlight, heat

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power plug

from the wall outlet.

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top,

20 cm on the left and right, and 20 cm on the back of

this unit.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

17 Before moving this unit, press STANDBY/ON to set

this unit in the standby mode, and disconnect the

AC power plug from the wall outlet.

Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

–

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet, even

if this unit itself is turned off. This state is called the

standby mode. In this state, this unit is designed to

consume a very small quantity of power.

Other components, as they may cause damage

and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

■

For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Do not cover this unit with

newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

Note

Do not plug in this unit to

connections are complete.

wall outlet until all

The plug severed from the mains lead must be destroyed, as

plug with bared flexible cord is hazardous if engaged in

socket outlet.

live

Do not operate this unit upside-down. It may

overheat, possibly causing damage.

■

Special Instructions for U.K. Model

Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use

12 Only voltage specified on this unit must be used.

Using this unit with higher voltage than specified

clean, dry cloth.

Blue: NEUTRAL

Brown: LIVE

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

of this unit with

voltage other than specified.

13 To prevent damage by lightning, disconnect the

power cord and outdoor antenna from the wall outlet

during an electrical storm.

om Www.Somanuals.com. All Manuals Search And

CONTENTS

INTRODUCTION

SOUND FIELD PROGRAMS

FEATURES............................................................. 2

GETTING STARTED............................................ 3

Supplied accessories.................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel................................................................. 4

Remote control........................................................... 6

Using the remote control ........................................... 7

Front panel display .................................................... 8

Rear panel................................................................ 10

SOUND FIELD PROGRAM

DESCRIPTIONS...............................................49

For movie/video sources.......................................... 49

For music sources .................................................... 51

ADVANCED OPERATION

ADVANCED OPERATIONS ..............................52

Selecting the OSD mode.......................................... 52

Using the sleep timer ............................................... 52

Manually adjusting speaker levels........................... 53

SET MENU............................................................54

Using SET MENU................................................... 56

PREPARATION

SPEAKER SETUP ............................................... 11

Speaker placement................................................... 11

Speaker connections ................................................ 12

CONNECTIONS .................................................. 15

Before connecting components................................ 15

Connecting video components................................. 16

Connecting audio components................................. 19

Connecting the FM and AM antennas

(RX-V757 only) .................................................. 21

Connecting the power supply cord .......................... 22

Speaker impedance setting ...................................... 23

Turning on the power............................................... 23

AUTO SETUP....................................................... 24

Introduction.............................................................. 24

Optimizer microphone setup.................................... 24

Starting the setup ..................................................... 25

SOUND MENU.................................................... 57

INPUT MENU...................................................... 62

OPTION MENU................................................... 64

ADVANCED SETUP MENU...............................66

REMOTE CONTROL FEATURES ...................68

Control area ............................................................. 68

Setting remote control codes ................................... 69

Controlling other components ................................. 71

Programming codes from other remote controls ..... 72

Changing source names in the display window....... 73

Clearing function sets .............................................. 74

Clearing individual functions .................................. 75

ZONE

Zone

(RX-V757 ONLY) ..................................76

connections.................................................. 76

Remote controlling Zone 2...................................... 77

ADDITIONAL INFORMATION

BASIC OPERATION

EDITING SOUND FIELD PARAMETERS ......79

PLAYBACK.......................................................... 30

Basic operations....................................................... 30

Selecting sound field programs ............................... 32

Selecting input modes.............................................. 37

FM/AM TUNING (RX-V757 ONLY)................. 39

Automatic and manual tuning.................................. 39

Presetting stations.................................................... 40

Selecting preset stations........................................... 42

Exchanging preset stations ...................................... 43

Receiving Radio Data System stations.................... 44

Changing the Radio Data System mode.................. 45

PTY SEEK function ................................................ 46

EON function........................................................... 47

RECORDING ....................................................... 48

What is sound field ............................................... 79

Changing parameter settings ................................... 79

SOUND FIELD PARAMETER

DESCRIPTIONS...............................................81

TROUBLESHOOTING .......................................86

RESETTING THE FACTORY PRESETS ........91

GLOSSARY...........................................................92

Audio formats.......................................................... 92

Sound field programs............................................... 93

Audio information ................................................... 93

Video signal information......................................... 94

SPECIFICATIONS...............................................95

om Www.Somanuals.com. All Manuals Search And

FEATURES

Built-in 7-channel power amplifier

Other features

◆

Minimum RMS output power

(0.06% THD, 20 Hz to 20 kHz, 8 !)

Front: 100 W + 100 W

Center: 100 W

Surround: 100 W + 100 W

Surround back: 100 W + 100 W

◆

YPAO: YAMAHA Parametric Room Acoustic

Optimizer for automatic speaker setup

192-kHz/24-bit D/A converter

A SET MENU that provides you with items for

optimizing this unit for your audio/video system

8 additional input jacks for discrete multi-channel input

PURE DIRECT for pure fidelity sound with analog and

PCM sources

◆

Sound field features

◆

Proprietary YAMAHA technology for the creation of

sound fields

◆

On-screen display function helpful in controlling this

unit

◆

Dolby Digital/Dolby Digital EX decoder

DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6,

DTS 96/24 decoder

Dolby Pro Logic/Dolby Pro Logic II/

Dolby Pro Logic IIx decoder

◆

S-video signal input/output capability

Component video input/output capability

Video signal conversion (Composite video " S-video

# Component video) capability for monitor out

Optical and coaxial digital audio signal jacks

Sleep timer

Cinema and music night listening modes

Remote control with preset remote control codes and

“learning” capability

◆

Virtual CINEMA DSP

™

SILENT CINEMA

Sophisticated AM/FM tuner (RX-V757 only)

◆

40-station random and direct preset tuning

Automatic preset tuning

Preset station shifting capability (preset editing)

◆

Zone 2 custom installation facility (RX-V757 only)

•

This document is the owner’s manual for both RX-V757 and DSP-AX757SE. Model names are given where the details of functions

are unique to each model. Illustrations for RX-V757 are mainly used for explanations.

•

indicates tip for your operation.

Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button

names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

•

This manual is printed prior to production. Design and specifications are subject to change in part as

case of differences between the manual and product, the product has priority.

result of improvements, etc. In

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol

are trademarks of Dolby Laboratories.

“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of

Digital Theater Systems, Inc.

“SILENT CINEMA” is

CORPORATION.

trademark of YAMAHA

om Www.Somanuals.com. All Manuals Search And

GETTING STARTED

Supplied accessories

Please check that you received all of the following parts.

Remote control

Batteries (4)

(AAA, R03, UM-4)

AM loop antenna

(RX-V757 only)

TRANSMIT

RE-NAME

CLEAR

LEARN

SYSTEM

POWER

STANDBY

SLEEP

INPUT MODE

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

-AUX

TUNER

DTV/CBL

VCR

DVD

SELECT

POWER

AMP

REC

AUDIO

DISC SKIP

Optimizer microphone

Indoor FM antenna

(RX-V757 only)

VOL

FREQ/TEXT

EON

MODE

START

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

TITLE

SRCH MODE

A/B/C/D/E

TV MUTE

ENTER

ON SCREEN STRAIGHT

DISPLA

TV VOL

PRESET

RETURN

MEMORY

EFFECT

STEREO

MUSIC ENTERTAIN MOVIE

STANDARD SELECT EXTD SUR. PURE DIRECT

SPEAKERS

NIGHT

ENT.

CHP/INDEX

Notes on batteries

Installing batteries in the remote

control

•

Change all of the batteries if you notice the following

conditions; the operation range of the remote control decreases,

the indicator does not flash or its light becomes dim.

Do not use old batteries together with new ones.

•

Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

•

If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries, set up the remote control code and program

any acquired functions that may have been cleared.

Press the

compartment cover off.

part and slide the battery

Insert four supplied batteries (AAA, R03,

UM-4) according to the polarity markings

(+ / –) on the inside of the battery

compartment.

Slide the cover back until it snaps into place.

om Www.Somanuals.com. All Manuals Search And

CONTROLS AND FUNCTIONS

Front panel

7* 8*

VOLUME

ZONE ON/OFF

MAIN ZONE

OPTIMIZER MIC

PRESET/TUNING FM/AM

A/B/C/D/E

PRESET/TUNING

MEMORY TUNING MODE

EDIT

SEARCH MODE

LEVEL

MAN'L/AUTO FM

^AUTD^O/I^MS^AP^NL^'LA^MY^ONO

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

INPUT MODE

MULTI CH

INPUT

PURE DIRECT

VIDEO AUX

AUDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

RX-V757 only

C*D E*

K L*

STANDBY/ON

PRESET/TUNING

(RX-V757 only)

Turns on this unit or sets it to the standby mode. When you

turn on this unit, you will hear a click and there will be a 4

to 5-second delay before this unit can reproduce sound.

Selects preset station number 1 to 8 when the colon (:) is

displayed next to the band indication in the front panel

display when the unit is in tuner mode. Selects the tuning

frequency when the colon (:) is not displayed.

LEVEL –/+

Note

In standby mode, this unit consumes

small amount of power in

Adjusts the level of the speaker channel selected using

NEXT.

order to receive infrared-signals from the remote control.

OPTIMIZER MIC jack

MEMORY (MAN’L/AUTO FM)

(RX-V757 only)

Use to connect and input audio signals from the supplied

microphone for use with the AUTO SETUP function (see

page 24).

Stores a station in the memory. Hold down this button for

more than 3 seconds to start automatic preset tuning.

Remote control sensor

TUNING MODE (AUTO/MAN’L MONO)

(RX-V757 only)

Receives signals from the remote control.

Front panel display

Switches the tuning mode between automatic (AUTO

indicator on) and manual (AUTO indicator off).

Shows information about the operational status of this

unit.

VIDEO AUX jacks

A/B/C/D/E

Input audio and video signals from a portable external

source such as a game console. To reproduce source

signals from these jacks, select V-AUX as the input

source.

(RX-V757 only)

Selects one of the 5 preset station groups (A to E) when

the unit is in tuner mode.

VOLUME

Selects the speaker channel to be adjusted.

Controls the output level of all audio channels.

This does not affect the REC OUT level.

om Www.Somanuals.com. All Manuals Search And

CONTROLS AND FUNCTIONS

ZONE ON/OFF buttons

(RX-V757 only)

PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with

headphones. When you connect headphones, no signals

are output to the PRE OUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down

to the left and right headphone channels.

MAIN

Switches this unit’s operation to control the component in

the main room (see page 77).

ZONE 2

SPEAKERS A/B

Switches this unit’s operation to control the component in

the second room (Zone 2) (see page 77).

Turns on or off the set of front speakers connected to the A

and/or B terminals on the rear panel each time the

corresponding button is pressed.

PRESET/TUNING (EDIT)

(RX-V757 only)

Switches the function of PRESET/TUNING l / h

(LEVEL) between selecting preset station numbers and

tuning.

STRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is

selected, input signals (2-channel or multi-channel) are

output directly from their respective speakers without

effect processing.

FM/AM

(RX-V757 only)

Switches the reception band when the unit is in tuner

mode.

PROGRAM

Use to select sound field programs or adjust the bass/treble

balance (in conjunction with TONE CONTROL).

TONE CONTROL

Use to adjust the bass/treble balance for the front left and

right, center, presence and subwoofer channels (see

page 31).

INPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of

signals received when one component is connected to two

or more of this unit’s input jacks (see page 37).

INPUT selector

Selects the input source you want to listen to or watch.

MULTI CH INPUT

Selects the source connected to the MULTI CH INPUT

jacks. When selected, the MULTI CH INPUT source takes

priority over the source selected with INPUT (or the input

selector buttons on the remote control).

PURE DIRECT

Turns on or off PURE DIRECT mode (see page 35).

om Www.Somanuals.com. All Manuals Search And

CONTROLS AND FUNCTIONS

Remote control

This section describes the function of each control on the

remote control used to control this unit. To operate other

components, see “REMOTE CONTROL FEATURES” on

page 68.

Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

TRANSMIT indicator

Flashes while the remote control is sending signals.

STANDBY

TRANSMIT

RE-NAME

CLEAR

LEARN

Sets this unit in the standby mode.

SYSTEM

POWER

STANDBY

SLEEP

INPUT MODE

SYSTEM POWER

Turns on the power of this unit.

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

Input selector buttons

V-AUX

DTV/CBL

TUNER

Select the input source and change the control area.

VCR

DVD

Display window

Shows the name of the selected source component that

you can control.

SELECT

LEVEL

Selects the speaker channel to be adjusted and sets the

level.

POWER

AMP

REC

Cursor buttons

/ ENTER

AUDIO

Use to select and adjust sound field program parameters or

SET MENU items.

DISC SKIP

VOL

Press i to select a preset station group (A to E) when the

unit is in tuner mode (RX-V757 only).

Press u / d to select a preset station number (1 to 8)

when the unit is in tuner mode (RX-V757 only).

FREQ/TEXT

EON

MODE

START

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

TITLE

TV VOL

TV INPUT

SRCH MODE

RETURN

A/B/C/D/E

TV MUTE

ENTER

Returns to the previous menu level when adjusting the

SET MENU parameters.

ON SCREEN STRAIGHT

TV VOL

PRESET

RETURN

DISPLAY

Sound field program/numeric buttons

MEMORY

EFFECT

STEREO

MUSIC ENTERTAIN MOVIE

Use to select sound field programs.

Use numbers 1 through 8 to select preset stations when the

unit is in tuner mode (RX-V757 only).

STANDARD SELECT EXTD SUR. PURE DIRECT

Use SELECT to playback 2-channel sources in surround

(see page 34).

Use EXTD SUR. to switch between 5.1 or 6.1/7.1-channel

playback of multi-channel software (see page 33).

Use PURE DIRECT to turn on or off PURE DIRECT

mode (see page 35).

SPEAKERS

NIGHT

ENT.

CHP/INDEX

SPEAKERS A/B

Use to turn on or off the set of front speakers connected to

the A and/or B terminal on the rear panel each time the

corresponding button is pressed.

RE-NAME

Use to change the input source name in the display

window (see page 73).

om Www.Somanuals.com. All Manuals Search And

CONTROLS AND FUNCTIONS

CLEAR

Radio Data System tuning buttons

(RX-V757 only)

Use to clear functions acquired when using the learn and

rename features, or setting remote control codes (see

page 74).

FREQ/TEXT

Press this button when the unit is receiving a Radio Data

System station to cycle the display between the PS mode,

PTY mode, RT mode, CT mode (if the station offers those

Radio Data System data services) and/or the frequency

display (see page 45).

LEARN

Use to set up manufacturer codes or program functions

from other remote controls (see pages 69 and 72).

SLEEP

PTY SEEK MODE

Sets the sleep timer.

Press this button to set the unit to the PTY SEEK mode

(see page 46).

INPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of

signals received when one component is connected to two

or more of this unit’s input jacks (see page 37).

PTY SEEK START

Press this button to begin searching for a station after the

desired program type has been selected in the PTY SEEK

mode (see page 46).

MULTI CH IN

Selects MULTI CH INPUT when using an external

decoder (etc.).

EON

Press this button to select a radio program type (NEWS,

INFO, AFFAIRS, SPORT) to tune in automatically (see

page 47).

SELECT k /n

Selects another component that you can control

independently of the input component selected with the

input selector buttons.

Using the remote control

AMP

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

Selects the AMP mode. You must select the AMP mode to

control the main unit.

VOL +/–

Increases or decreases the volume level.

VOLUME

MUTE

A/B/C/D/E

PRESET/TUNING

MEMORY

Mutes the sound. Press again to restore the audio output to

the previous volume level.

SEAR

ITMODE

XIM

^XTORY

LEVEL

DISPLAYONO

AUTO/MAN'L M

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

MULTI CH

INPUT

VIDEO

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SET MENU

Approximately

Activates the SET MENU function.

TRANSMIT

–

SLEEP

PHONO

V-AUX

DTV

TUNER

MULTI CH IN

CD-R

ON SCREEN

VCR

SELECT

AMP

POWER

Selects the display mode of the on-screen display (OSD)

this unit sends to your video monitor.

REC

FREQ/TEXT

EON

MODE

LEVEL

MUTE

TITLE

A/B/C/D/E

TV MUTE

ENTER

PRESET

ON SCREEN

DISPLA

STRAIGHT

RETURN

MEMO

EFFECT

STEREO

STRAIGHT (EFFECT)

SPEAKERS

NIGHT

+10

CHP/INDEX

Switches the sound fields off or on. When STRAIGHT is

selected, input signals (2-channel or multi-channel) are

output directly from their respective speakers without

effect processing.

■

•

Handling the remote control

Do not spill water or other liquids on the remote

NIGHT

control.

Turns on or off the night listening modes (see page 35).

•

Do not drop the remote control.

Do not leave or store the remote control in the

following types of conditions:

–

places of high humidity, such as near a bath

places of high temperature, such as near a heater or

stove

–

extremely low temperatures

dusty places

om Www.Somanuals.com. All Manuals Search And

CONTROLS AND FUNCTIONS

Front panel display

8*9* 0*A*

TUNER

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

PHONO

MATRIX DISCRETE

DIGITAL

VIRTUAL SILENT CINEMA

YPAO AUTO TUNED STEREO MEMORY MUTE VOLUME

STANDARD ZONE2 NIGHT

HiFi DSP

PTY HOLD PS PTY RT CT EON SLEEP

96/24

LFE SL SB SR

PCM

O* FGH

L M

RX-V757 only

Decoder indicators

STEREO indicator

(RX-V757 only)

When any of this unit’s decoders function, the respective

indicator lights up.

Lights up when this unit is receiving a strong signal for an

FM stereo broadcast while the AUTO indicator is lit.

VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see

page 36).

MEMORY indicator

(RX-V757 only)

Flashes to show that a station can be stored.

MUTE indicator

Flashes while the MUTE function is on.

VOLUME level indication

Indicates the current volume level.

PCM indicator

SILENT CINEMA indicator

Lights up when headphones are connected and a sound

field program is selected (see page 31).

Input source indicators

cursor lights to show the current input source.

Sound field indicators

Light to indicate the active DSP sound fields.

Lights up when this unit is reproducing PCM (Pulse Code

Modulation) digital audio signals.

Presence DSP sound field

STANDARD indicator

Listening position

Lights up when a decoder is selected (see page 34).

Left surround

DSP sound field

Right surround

DSP sound field

NIGHT indicator

Surround back DSP sound field

Lights up when you select night listening mode.

SP A B indicators

CINEMA DSP indicator

Light up according to the set of front speakers selected.

Both indicators light up when both sets of speakers are

selected.

Lights up when you select a CINEMA DSP sound field

program.

YPAO indicator

Headphones indicator

Lights up during the auto setup procedure and when the

auto setup speaker settings are used without any

modifications.

Lights up when headphones are connected.

HiFi DSP indicator

AUTO indicator

(RX-V757 only)

Lights up when you select a HiFi DSP sound field

program.

Lights up when this unit is in automatic tuning mode.

Multi-information display

Shows the current sound field program name and other

information when adjusting or changing settings.

TUNED indicator

(RX-V757 only)

Lights up when this unit is tuned into a station.

om Www.Somanuals.com. All Manuals Search And

CONTROLS AND FUNCTIONS

SLEEP indicator

Lights up while the sleep timer is on.

96/24 indicator

Lights up when a DTS 96/24 signal is input to this unit.

LFE indicator

Lights up when the input signal contains the LFE signal.

Input channel indicators

Indicate the channel components of the current digital

input signal.

ZONE 2 indicator

(RX-V757 only)

Lights up when Zone 2 power is on.

Radio Data System indicators

(RX-V757 only)

The name(s) of the Radio Data System data offered by the

currently received Radio Data System station light(s) up.

EON lights up when an Radio Data System station that

offers the EON data service is being received.

PTY HOLD lights up while searching for stations in the

PTY SEEK mode.

om Www.Somanuals.com. All Manuals Search And

CONTROLS AND FUNCTIONS

Rear panel

5* 6*

COMPONENT VIDEO

TUNER

GND

DVD

75Ω UNBAL.

ANT

AUDIO

DTV

/CBL

PHONO

GND

VIDEO

DIGITAL

OUTPUT

MD/CD-R

MONITOR

OUT

DVD

REMOTE

PRE OUT

AC OUTLETS

SWITCHED

CENTER

SINGLE

DTV/

CBL

OPTICAL

MD/CD-R

DVD

(PLAY)

CONTROL

OUT

/CD-R

OUT

(REC)

OUT

PRESENCE/

+12V

15mA MAX.

VCR

SUB

SURROUND

BACK

ZONE

FRONT

SPEAKERS

FRONT

OUT

DTV/CBL

SURROUND

DVR/

SURROUND

VCR

SURROUND

BACK

OUT

DVD

FRONT

CENTER

SURROUND BACK

COAXIAL

SUB

WOOFER

VIDEO

MONITOR OUT

VIDEO

CENTER

DIGITAL

INPUT

ZONE

MULTI CH INPUT

OUTPUT

RX-V757 only (or DSP-AX757SE has different jacks)

DIGITAL OUTPUT jacks

CONTROL OUT jack

(RX-V757 only)

See page 19 for details.

This is a control expansion terminal for commercial use.

Audio component jacks

See page 19 for connection information.

AC OUTLET(S)

Use to supply power to your other A/V components (see

page 22).

Video component jacks

See pages 16 and 18 for connection information.

DIGITAL INPUT jacks

Antenna terminals

(RX-V757 only)

See pages 16, 18 and 19 for details.

MULTI CH INPUT jacks

See page 21 for connection information.

See page 17 for connection information.

PRESENCE/ZONE 2 speaker terminals

(RX-V757 only)

ZONE 2 OUTPUT jacks

(RX-V757 only)

PRESENCE speaker terminals

(DSP-AX757SE only)

These jacks output analog signals only. See page 76 for

details.

See page 13 for connection information.

TUNER INPUT jacks

(DSP-AX757SE only)

These jacks input signals from the external tuner.

REMOTE IN/OUT jacks

(RX-V757 only)

See page 76 for details.

PRE OUT jacks

See page 20 for connection information.

Speaker terminals

See page 12 for connection information.

om Www.Somanuals.com. All Manuals Search And

SPEAKER SETUP

Surround speakers (SR and SL)

Speaker placement

The speaker layout below shows the standard ITU-R

speaker setting. You can use it to enjoy CINEMA DSP and

multi-channel audio sources.

The surround speakers are used for effect and surround

sounds. Place these speakers behind your listening

position, facing slightly inwards, about 1.8 m above the

floor.

Surround back speakers (SBR and SBL)

The surround back speakers supplement the surround

speakers and provide for more realistic front-to-back

transitions. Place these speakers directly behind the

listening position and at the same height as the surround

speakers. They should be positioned at least 30 cm apart.

Ideally, they should be positioned at the same width as the

front speakers.

ITU-R is the radio communication sector of the ITU

(International Telecommunication Union).

30˚

Subwoofer

The use of a subwoofer, such as the YAMAHA Active

Servo Processing Subwoofer System, is effective not only

for reinforcing bass frequencies from any or all channels,

but also for high fidelity reproduction of the LFE (low-

frequency effect) channel included in Dolby Digital and

DTS software. The position of the subwoofer is not so

critical, because low bass sounds are not highly

directional. But it is better to place the subwoofer near the

front speakers. Turn it slightly toward the center of the

room to reduce wall reflections.

60˚

80˚

SBL

SBR

30 cm or more

Presence speakers (PR and PL)

Presence speakers supplement the sound from the front

speakers with extra ambient effects produced by CINEMA

DSP (see page 49). These effects include sounds that

filmmakers intend to locate a little farther back behind the

screen in order to create more theater-like ambience. Place

these speakers at the front of the room about 0.5 – 1 m

outside the front speakers, facing slightly inwards, and

about 1.8 m above the floor.

1.8

Front speakers (FR and FL)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers an equal distance from

the ideal listening position. The distance of each speaker

from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system. Align the front

face of the center speaker with the front face of your video

monitor. Place the speaker centrally between the front

speakers and as close to the monitor as possible, such as

directly over or under it.

om Www.Somanuals.com. All Manuals Search And

SPEAKER SETUP

Speaker connections

Tighten the knob to secure the wire.

Be sure to connect the left channel (L), right channel (R),

“+” (red) and “–” (black) properly. If the connections are

faulty, no sound will be heard from the speakers, and if the

polarity of the speaker connections is incorrect, the sound

will be unnatural and lack bass.

CAUTION

•

If you will use 4 or 6 ohm speakers, be sure to

set this unit’s speaker impedance setting to 4

ohms before using (see page 23).

Red: positive (+)

Black: negative (–)

•

Before connecting the speakers, make sure that the

power of this unit is off.

Do not let the bare speaker wires touch each other or do

not let them touch any metal part of this unit. This

could damage this unit and/or speakers.

■

Connecting to PRESENCE/ZONE 2 or

PRESENCE speaker terminals

•

Use magnetically shielded speakers. If this type of

speakers still creates the interference with the monitor,

place the speakers away from the monitor.

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (red)

terminals on this unit and your speaker. Connect the plain

cable to the “–” (black) terminals.

Open the tab.

Insert one bare wire into the hole of each

terminal.

10 mm

Return the tab to secure the wire.

Remove approximately 10 mm of insulation

from the end of each speaker cable.

Twist the exposed wires of the cable together

to prevent short circuits.

Unscrew the knob.

Insert one bare wire into the hole in the side

of each terminal.

om Www.Somanuals.com. All Manuals Search And

SPEAKER SETUP

Subwoofer

system

Presence speakers

Surround speakers

Right Left

Right

Left

PRE OUT

CENTER

SINGLE

PRESENCE/

ZONE

SUB

SURROUND

BACK

FRONT

SPEAKERS

SURROUND

FRONT

CENTER

SURROUND BACK

Front

speakers

(B)

Center

speaker

Right

Left

Surround back

speakers

Right

Left

Front speakers (A)

You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously.

•

The surround back speakers output the surround back channel included in Dolby Digital EX and DTS-ES software and only

operate when the Dolby Digital EX, DTS-ES or Dolby Pro Logic IIx decoder is turned on.

The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields

are selected.

•

om Www.Somanuals.com. All Manuals Search And

SPEAKER SETUP

■

FRONT terminals

Connect one or two speaker systems (6, 7) to these

terminals. If you use only one speaker system, connect it

to the FRONT A or B terminals.

■

CENTER terminals

Connect a center speaker (8) to these terminals.

■

SURROUND terminals

Connect surround speakers (4, 5) to these terminals.

■

SUBWOOFER jack

Connect subwoofer with built-in amplifier (1), such as

the YAMAHA Active Servo Processing Subwoofer

System, to this jack.

■

SURROUND BACK terminals

Connect surround back speakers (9, 10) to these terminals.

If you only connect one surround back speaker, connect it

to the left (L) terminals.

Speaker layout

■

PRESENCE terminals

Connect presence speakers (2, 3) to these terminals.

If you are using RX-V757, you can also use these speakers as

Zone

speakers (see page 65).

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

Dust protection cap

Before connecting components

Pull out the cap from the optical jack before you connect

the fiber optic cable. Do not discard the cap. When you are

not using the optical jack, be sure to put the cap back in

place. This cap protects the jack from dust.

CAUTION

Do not connect this unit or other components to the mains

power until all connections between components are

complete.

■

Cable indications

For analog signals

■

Video jacks

left analog cables

This unit has three types of video jacks. Connection

depends on the availability of input jacks on your monitor.

The signals input through the S VIDEO jacks on this unit

are automatically converted for output through the VIDEO

jacks. When VIDEO CONV. is set to ON (see page 64),

signals input through the VIDEO jacks can be output

through the S VIDEO and COMPONENT VIDEO jacks.

Likewise, signals input through the S VIDEO jacks can

also be output through the COMPONENT VIDEO jacks.

right analog cables

For digital signals

optical cables

coaxial cables

For video signals

video cables

COMPONENT VIDEO

VIDEO

S-video cables

component video cables

VIDEO jacks

For conventional composite video signals.

■

Analog jacks

S VIDEO jacks

You can input analog signals from audio components by

connecting audio pin cable to the analog jacks on this unit.

Connect red plugs to the right jacks and white plugs to the

left jacks.

For S-video signals, separated into luminance (Y) and

color (C) video signals to achieve high-quality color

reproduction.

COMPONENT VIDEO jacks

■

Digital jacks

For component signals, separated into luminance (Y) and

color difference (P^B, PR) to provide the best quality in

picture reproduction.

This unit has digital jacks for direct transmission of digital

signals through either coaxial or fiber optic cables. You

can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. When you connect components to both

the COAXIAL and OPTICAL jacks, priority is given to

the input signals from the COAXIAL jack. All digital

input jacks are compatible with 96-kHz sampling digital

signals.

Signal flow inside this unit

Output

Input

(MONITOR OUT)

COMPONENT

VIDEO

Note

VIDEO

This unit handles digital and analog signals independently. Thus

audio signals input to the analog jacks are only output to the

analog OUT (REC) jacks. Likewise audio signals input to the

digital (OPTICAL or COAXIAL) jacks are only output to the

DIGITAL OUTPUT jack.

Only when VIDEO CONV. is set to ON

(see page 64).

Note

When signals are input through both the

VIDEO and VIDEO

jacks, signals input through the VIDEO jack have priority.

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

Connecting video components

■

Connections for DVD playback

Note

Be sure to connect your video source components in the same way you connect your video monitor to this unit if VIDEO CONV. (see

page 64) is set to OFF. For example, if you connect your video monitor to this unit using VIDEO connection, connect your video

source components to this unit using the VIDEO connections. (Even when VIDEO CONV. is set to OFF, S-video signals input from

your video source component are automatically converted to composite signals in this unit.)

Coaxial out

Optical out

Video out

DVD player

Audio out

P^R

COMPONENT VIDEO

PR PB

DVD

AUDIO

VIDEO

MONITOR

OUT

Video in

Video

DVD

monitor

DVD

COAXIAL

DIGITAL

INPUT

MONITOR OUT

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

■

Connecting to the MULTI CH INPUT jacks

This unit is equipped with 8 additional input jacks (left and right FRONT, CENTER, left and right SURROUND, left and

right SURROUND BACK and SUBWOOFER) for discrete multi-channel input from a multi-format player, external

decoder, sound processor or pre-amplifier.

Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to

match the left and right outputs to the left and right input jacks for the front and surround channels.

For 6-channel input

For 8-channel input

FRONT

SURROUND

BACK

SUB

WOOFER

CENTER

WOOFER

CENTER

MULTI CH INPUT

Subwoofer

out

Subwoofer

out

Center

out

Center

out

Multi-format player/

External decoder

Multi-format player/

External decoder

Surround

back out

Front

out

Surround

out

Front

out

Surround

out

Notes

•

When you select MULTI CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you

cannot select sound field programs.

This unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that

you connect at least

5.1-channel speaker system before using this feature.

When headphones are used, only front left and right channels are output.

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

Connections for other video components

■

Notes

Be sure to connect your video source components in the same way you connect your video monitor to this unit if VIDEO CONV. (see

•

page 64) is set to OFF. For example, if you connect your video monitor to this unit using

source components to this unit using the VIDEO connections.

VIDEO connection, connect your video

•

Converted video signals are only output to MONITOR OUT jacks. When recording, you must make the same type of video

connections (i.e., S-video) between each component.

Video out

Optical out

Cable TV or

satellite tuner

Audio out

P^R

COMPONENT VIDEO

AUDIO

DTV/

CBL

VIDEO

MONITOR

OUT

Video in

Video

monitor

DTV/

CBL

VCR

OUT

DTV/CBL

COAXIAL

VIDEO

MONITOR OUT

VIDEO

DIGITAL

INPUT

Audio in

Audio out

Video in

DVD recorder

or VCR

Video out

VIDEO AUX

AUDIO

VIDEO

OPTICAL

■

VIDEO AUX jacks (on the front panel)

Use these jacks to connect any video source, such as a

game console or video camera, to this unit.

Optical out

Audio out

Game

console or

video

camera

Audio out

Video out

S-video out

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

Connecting audio components

■

Connections for audio components

Turntable

GND

Audio out

AUDIO

PHONO

GND

DIGITAL

OUTPUT

MD/CD-R

Audio out

Optical in

CD player

(PLAY)

OPTICAL

Optical out

MD/

CD-R

OUT

(REC)

MD/CD-R

Audio out

MD recorder or

tape deck

Coaxial out

Audio in

COAXIAL

DIGITAL

INPUT

■

Connecting a turntable

Connect your turntable to the GND terminal to reduce noise in

the signal. However you may hear less noise without the

connection to the GND terminal for some record players.

PHONO jacks are for connecting a turntable with an MM

or high-output MC cartridge. If you have a turntable with

a low-output MC cartridge, use an in-line boosting

transformer or MC-head amplifier when connecting to

these jacks.

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

Connecting to an external amplifier

■

If you want to increase the power output to the speakers,

or want to use another amplifier, connect an external

amplifier to the PRE OUT jacks as follows.

Notes

•

When audio pin plugs are connected to the PRE OUT jacks for

output to an external amplifier, do not make connections to the

corresponding SPEAKERS terminals. Set the volume of the

amplifier connected to this unit to the maximum.

The signals output through the FRONT PRE OUT and

CENTER PRE OUT jacks are affected by the TONE

CONTROL settings.

•

If SPEAKERS

is turned off and SP

is set to ZONE

(see

page 65), signals will only be output from the FRONT PRE

OUT jacks.

PRE OUT

CENTER

SINGLE

SUB

SURROUND

BACK

FRONT

SURROUND WOOFER

FRONT PRE OUT jacks

Front channel line output jacks.

SURROUND PRE OUT jacks

Surround channel line output jacks.

CENTER PRE OUT jack

Center channel line output jack.

SURROUND BACK PRE OUT jacks

Surround back or presence channel line output jacks.

SUBWOOFER PRE OUT jack

Connect subwoofer with built-in amplifier, such as the

YAMAHA Active Servo Processing Subwoofer System,

to this jack.

Notes

•

Each PRE OUT jack outputs the same channel signals as the

corresponding speaker terminals.

Adjust the volume level of the subwoofer with the control on

the subwoofer. It is also possible to adjust the volume level

using the remote control (see “Manually adjusting speaker

levels” on page 53).

•

Some signals may not be output from the SUBWOOFER PRE

OUT jack depending on the SPEAKER SET (see page 57) and

LFE/BASS OUT (see page 58) settings.

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

Connecting the FM and AM

antennas (RX-V757 only)

Both FM and AM indoor antennas are included with this

unit. In general, these antennas should provide sufficient

signal strength. Connect each antenna correctly to the

designated terminals.

■

Connecting the AM loop antenna

Set up the AM loop antenna.

Indoor FM antenna

(included)

AM loop antenna

(included)

TUNER

75Ω UNBAL.

ANT

Press and hold the tab to

insert the AM loop antenna

lead wires into the AM ANT

and GND terminals.

Ground (GND terminal)

For maximum safety and minimum

interference, connect the antenna GND

Orient the AM loop antenna

for the best reception.

terminal to

good earth ground.

good

earth ground is

moist earth.

metal stake driven into

Notes

•

The AM loop antenna should be placed away from this unit.

The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

•

properly installed outdoor antenna provides clearer reception

than an indoor one. If you experience poor reception quality, an

outdoor antenna may improve the quality. Consult the nearest

authorized YAMAHA dealer or service center about outdoor

antennas.

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

Connecting the power supply cord

■

Connecting the AC power cord

Plug the power cord into an AC wall outlet.

■

AC OUTLET(S) (SWITCHED)

DSP-AX757SE ..................................................... 1 outlet

RX-V757 ..............................................................2 outlets

Use these outlets to connect the power cords from your

other components to this unit. Power to the AC

OUTLET(S) is controlled by this unit’s STANDBY/ON

(or SYSTEM POWER and STANDBY). The outlet(s)

supply power to any connected component whenever this

unit is turned on. For information on the maximum power

(total power consumption of components), see

“SPECIFICATIONS” on page 95.

■

Memory back-up

The memory back-up circuit prevents the stored data from

being lost even if this unit is in the standby mode.

However if the power cord is disconnected from the AC

wall outlet, or the power supply is cut for more than one

week, the stored data will be lost.

om Www.Somanuals.com. All Manuals Search And

CONNECTIONS

Speaker impedance setting

Turning on the power

When all connections are complete, turn on the power of

this unit.

CAUTION

If you are using 4 or 6 ohm speakers, set the impedance to

4 or 6 ohms as follows before turning on the power.

VOLUME

Be sure this unit is in the standby mode.

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

SEAR

ITMODE

ORY

LEVEL

DISPLAY

AUTO/MAN'L MONO

PROGRAM

INPUT

Turn off the power to this unit, and while

holding down STRAIGHT (EFFECT), press

STANDBY/ON.

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

This unit turns on, and “SP IMP.” appears in the front

panel display.

STRAIGHT

While holding

STANDBY

TRANSMIT

RE-NAME

CLEAR

LEARN

/ON

down, press

SYSTEM

POWER

STANDBY

SLEEP

INPUT MODE

EFFECT

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

-AUX

TUNER

DTV/CBL

VCR

DVD

SP I MP.

SELECT

POWER

AMP

REC

Press STRAIGHT (EFFECT) repeatedly to

select “4 ! MIN”.

Press STANDBY/ON (or SYSTEM POWER on

the remote control) to turn on the power of

this unit.

STRAIGHT

EFFECT

SYSTEM

POWER

STANDBY

/ON

Press STANDBY/ON to turn off the power.

Front panel

Remote control

STANDBY

/ON

Turn on the video monitor connected to this

unit.

The setting you made is reflected the next time this

unit’s power is turned on.

om Www.Somanuals.com. All Manuals Search And

AUTO SETUP

Optimizer microphone setup

Introduction

This receiver employs YAMAHA Parametric Room

Acoustic Optimizer (YPAO) technology which lets you

avoid troublesome listening-based speaker setup and

achieves highly accurate sound adjustments. The supplied

optimizer microphone collects and analyzes the sound

your speakers produce in your actual listening

environment.

Connect the supplied optimizer microphone

to the OPTIMIZER MIC jack on the front

panel.

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

Notes

SEAR

ITMODE

CAT

XTORY

LEVEL

PROGRAM

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

INPUT MODE

•

Please be advised that it is normal for loud test tones to be

output during the auto setup procedure.

STANDBY

/ON

SILENT CINEMA

•

If auto setup stops and error messages appear on the screen,

follow the troubleshooting on page 28.

YPAO performs the following checks and makes

appropriate adjustments to give you the best possible

sound from your system.

WIRING:

Notes

Checks which speakers are connected and the polarity of

each speaker.

•

After you have completed the auto setup procedure, be sure to

disconnect the optimizer microphone.

•

The optimizer microphone is sensitive to heat.

– Keep it away from direct sunlight.

– Do not place it on top of this unit.

SIZE:

Checks the speakers frequency response and sets the

crossover/high cut frequency for the subwoofer to improve

the sound relationship between the speakers and the

subwoofer.

Place the optimizer microphone on a flat

level surface with the omni-directional

microphone head upward, at your normal

listening position.

If possible, use a tripod (etc.) to affix the optimizer

mic at the same height as your ears would be when

you are seated in your listening position.

DISTANCE:

Checks the distance of each speaker from the listening

position and adjusts the delay of each channel so that the

sound from each speaker reaches the listening position at

the same time. Also checks the phase of each speaker.

Optimizer microphone position

EQUALIZING:

Adjusts frequency and levels of each channel’s parametric

equalizer to reduce coloration across the channels and

create cohesive sound field. This is particularly

important if you use different brands or sizes of speakers

for some channels or have a room with unique sonic

characteristics.

YPAO equalizing calibration incorporates three

parameters (frequency, level and Q factor) for each of the

seven bands in its parametric equalizer to provide highly

precise automatic adjustment of frequency characteristics.

LEVEL:

Checks and adjusts the sound level (volume) of each

speaker.

om Www.Somanuals.com. All Manuals Search And

AUTO SETUP

Starting the setup

For best results, make sure the room is as quiet as possible

during the auto setup procedure (YPAO). If there is too

much ambient noise, the results may not be satisfactory.

Press

to select SETUP, then press

/ i

to select the desired setting.

AUTO:MENU

SETUP;;;;;;;AUTO

START

ꢀꢀꢀꢀ

If your subwoofer has adjustable volume and crossover/high cut

frequency controls, set the volume between

ꢀꢀAutomatic

ꢀꢀprocessing

ꢀꢀof all items

and 11 o’clock (as

[

]/[ ]:Up/Down

viewed on conventional clockface) and set the crossover/high

[<]/[>]:Select

cut frequency to the maximum.

CROSSOVER/

HIGH CUT

VOLUME

AUTO

To perform the auto setup procedure

(YPAO).

RELOAD

To reload the last auto setup (YPAO)

settings to override any manual

changes.

MIN

MAX

MIN

MAX

Subwoofer

UNDO

To undo the last auto setup (YPAO) and

restore the previous settings.

DEFAULT To restore the factory preset (default)

Switch on this unit and your video monitor.

Make sure the OSD is displayed.

setup parameters.

You can choose RELOAD or UNDO only if you have

already performed the auto setup procedure.

Press AMP.

AMP

Press

to select “START”, then press

ENTER to start the setup procedure.

The screen changes as follows.

Press SET MENU.

SET MENU

SRCH MODE

AUTO:

ENU

SETUP; ; ;

;

AUTO

START

When MEMORY GUARD is set to ON, you cannot select

any other SET MENU items (see page 60).

Aut oma t

pr oc e s

of a l

e m

Up/ Down

St a r

[

]

[

]

ENTER]

Press

to select AUTO SETUP, then

press ENTER.

PRESET

TV VOL

SET MENU

ꢀINITIALZING

AUTO:CHECK

.ꢀ;AUTOꢀSETUP

ꢀꢀ;MANUALꢀSETUP

ꢀꢀ;SIGNAL INFO.

TV MUTE

ENTER

.ꢀWIRING

.ꢀSIZE/DISTANCE

.ꢀEQUALIZING

TV VOL

PRESET

.ꢀLEVEL

ꢀꢀCHECK CH=CENTER

ꢀꢀ|||||;;;;;;;;

ꢀꢀꢀꢀꢀꢀ[ꢀ]:ꢀExit

ꢀꢀ[ ]/[ ]:Up/Down

ꢀꢀ[ENTER]:Enter

PRESET

TV VOL

RESULT:EXIT

.ꢀWARNING (3)

ꢀꢀRESULT

TV MUTE

ENTER

ꢀꢀ SP

ꢀꢀ DIST: 10.0/ 12.0ft

5/4/0.1

ꢀꢀ LVL

.ꢀ>SET CANCEL

-9.0/ +6.5dB

TV VOL

PRESET

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[ENTER]:Enter

om Www.Somanuals.com. All Manuals Search And

AUTO SETUP

The results displayed in the RESULT:EXIT screen

■

Use u

If an error screen appears

are as follows:

/ i to select RETRY or EXIT, then press

ENTER.

The number of connected speakers

displayed in the order:

Front/Back/Subwoofer

RROR

.ꢀE-9:USER CANCEL

.ꢀ

DI ST

LVL

The distance of the speakers from this

unit displayed in the order:

Closest speaker distance/Farthest

speaker distance

The speaker output level displayed in

the order:

.ꢀDon't operate

.ꢀany function.

.ꢀ>RETRYꢀꢀEXIT

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[ENTER]:Enter

RETRY

EXI

To retry the auto setup procedure.

To exit auto setup.

Lowest output level/Highest output

level

•

If you selected AUTO in step 5, “WAITING”

appears when the auto setup procedure is started,

then loud test tones are output from each speaker in

turn.

•

If you selected DEFAULT, RELOAD or UNDO in

step 5, no test tones are output.

If an ERROR screen appears, see “If an error

screen appears” on page 26.

If a WARNING screen appears, see “If a warning

screen appears” on page 27.

You can display the detailed result information by using

ENTER to select “RESULT”. In the detailed result information

screen, you can switch information by pressing

and

Press

to select SET or CANCEL, then

press ENTER to return to the SET MENU

screen.

RESULT:EXIT

ꢀWARNING (3)

ꢀꢀRESULT

ꢀꢀ SP

ꢀꢀ DIST: 10.0/ 12.0ft

5/4/0.1

ꢀꢀ LVL

.ꢀ>SET CANCEL

-9.0/ +6.5dB

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[ENTER]:Enter

SET

To apply the auto setup (YPAO)

settings.

CANCEL

To cancel the auto setup (YPAO)

without making any changes.

If you are not satisfied with the result or want to manually adjust

each setup parameter, use the manual setup parameters (see page

52).

Notes

•

If E-10 appears during testing, restart the procedure from step 3.

To cancel the auto setup procedure before completion, press

om Www.Somanuals.com. All Manuals Search And

AUTO SETUP

■

If a warning screen appears

Press ENTER to display detailed information

about the warning.

Press j / i to switch between warning messages.

RESULT:EXIT

.ꢀWARNING (3)

ꢀꢀRESULT

ꢀꢀ SP

ꢀꢀ DIST: 10.0/ 12.0ft

5/4/0.1

ꢀꢀ LVL

.ꢀ>SET CANCEL

-9.0/ +6.5dB

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[ENTER]:Enter

WARNING:W-1

.ꢀ<OUT OF PHASE>

.ꢀReverse Channel

.ꢀFL

.ꢀCENTER

.ꢀPL

.ꢀSL

SBR

.ꢀSBL

ꢀꢀ[<]/[>]:Select

ꢀꢀ[ENTER]:Return

W-1 example screen

For details about each message, see page 29.

•

Warnings let you know about potential problems detected

during auto setup. Warnings will not cancel the auto setup.

The number of warnings is displayed to the right of

“WARNING”.

When the warning is not applicable to

displayed.

speaker, “– –” is

When you are finished, press ENTER to

return to the RESULT:EXIT screen.

Continue from step 7 on page 26.

Notes

•

If you change speakers, speaker positions, or the layout of your

listening environment, perform auto setup again to re-calibrate

your system.

•

Depending on listening environments, SWFR PHASE:REV

appears in AUTO:CHECK and SUBWOOFER PHASE

parameter in SET MENU (see page 59) is automatically set to

REVERSE. To select the desired setting, change the

SUBWOOFER PHASE parameter in SET MENU.

In the DISTANCE results, the distance displayed may be longer

than the actual distance depending on the characteristics of your

subwoofer.

•

om Www.Somanuals.com. All Manuals Search And

AUTO SETUP

Troubleshooting for auto setup procedure

■

Before auto setup

Error message

Cause

Remedy

Optimizer microphone is not connected.

•

Connect the supplied optimizer microphone to the

OPTIMIZER MIC jack on the front panel.

Conne c t MI

Unpl ug HP

Headphones are connected.

Unplug the headphones.

Errors during auto setup

Error message

Cause

Remedy

Front L/R channel signal(s) is (are) not

detected.

•

Select the front speakers with SPEAKERS A/B.

Check the front left and right speaker connections.

Turn on the power to the external amplifier (when the

front speaker signals are output from an external

amplifier).

E- 1: NO FRONT SP

Only one surround channel signal is detected.

Only one presence channel signal is detected.

•

Check the surround speaker connections.

Check the presence speaker connections.

E- 2: NO SURR. SP

E- 3: NO PRES. SP

E- 4: SBR- >SBL

Only right surround back channel signal is

detected.

Connect the surround back speaker to the LEFT

SURROUND BACK SPEAKERS terminal if you

only have one surround back speaker.

Background noise is too loud.

•

Try the auto setup procedure in quiet environment.

E- 5: NOI SY

Turn off noisy electric equipment like air conditioners

(etc.) or move them away from the optimizer

microphone.

Surround back speaker(s) is (are) connected,

though surround L/R speakers are not.

•

Connect surround speakers when you use (a)

surround back speaker(s).

E- 6: CHECK SUR.

•

Check the surround speaker connections.

The optimizer microphone was unplugged

during the auto setup procedure.

Do not touch the optimizer microphone during the

auto setup procedure.

E- 7: NO MI

The optimizer microphone does not detect test

tones.

•

Check the microphone setting.

Check the speaker connections and placement.

E- 8: NO SI GNAL

The auto setup procedure was cancelled due to

user activity.

•

Perform the auto setup procedure again. Do not adjust

VOLUME (etc.) during the auto setup procedure.

E- 9: USER CANCEL

DSP communication error or hangup

•

Perform the auto setup procedure again.

E- 10:

ERROR

NTERNAL

occurred.

om Www.Somanuals.com. All Manuals Search And

AUTO SETUP

Warnings after auto setup

Press j to display detailed information about individual warnings.

Warning message

Cause

Remedy

Check the speaker connections for proper polarity

Speaker polarity is not correct. This message

may appear depending on the speakers even

when the speakers are connected correctly.

•

W- 1: OUT OF PHASE

(+ / –).

The distance between the speaker and the

•

Move the speaker closer to the listening position.

Check the speaker connections for proper polarity

W- 2: OVER 24m

listening position is 24

or more.

(+ / –).

The difference of volume level among speakers

is excessive. (No level correction is made.)

•

Readjust the speaker installation so that all speakers

are set in locations with similar conditions.

Check the speaker connections for proper polarity

W- 3: LEVEL ERROR

–).

Use speakers of similar quality and efficiency.

•

If the ERROR or WARNING screens appears, check the cause of the problem, then perform the auto setup procedure again.

If warning W-1 appears, corrections are made, but they may not be optimal.

If warning W-2 or W-3 appears, no corrections are made.

If error E-10 occurs repeatedly, please contact qualified YAMAHA service center.

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

Basic operations

Select the input source.

Rotate INPUT (or press one of the input selector

buttons on the remote control) to select the input you

desire.

VOLUME

INPUT

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

OPTIMIZER MIC

V-AUX

DTV/CBL

TUNER

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

SEAR

ORY

LEVEL

DISPLAY

AUTO/MAN'L MONO

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VCR

DVD

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

Front panel

Remote control

The current input source name and input mode appear

in the front panel display and video monitor for a few

seconds.

REC

TRANSMIT

RE-NAME

CLEAR

LEARN

AUDIO

DISC SKIP

SYSTEM

POWER

STANDBY

SLEEP

INPUT MODE

VOL

FREQ/TEXT

EON

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

MODE

START

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

V-AUX

TUNER

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

PHONO

VOLUME

TITLE

TV INPUT

SRCH MODE

DTV/CBL

VCR

DVD

A/B/C/D/E

TV MUTE

ENTER

ON SCREEN STRAIGHT

DISPLA

TV VOL

PRESET

SELECT

RETURN

MEMORY

EFFECT

STEREO

MUSIC ENTERTAIN MOVIE

POWER

AMP

3,7

Selected input source

Input mode

STANDARD SELECT EXTD SUR. PURE DIRECT

REC

SPEAKERS

NIGHT

ENT.

CHP/INDEX

Start playback or select a broadcast station

on the source component.

Refer to the operating instructions for the component.

Press STANDBY/ON (or SYSTEM POWER on

the remote control) to turn on the power.

Adjust the volume to the desired output level.

VOLUME

SYSTEM

POWER

STANDBY

/ON

VOL

Front panel

Remote control

Turn on the video monitor connected to this

unit.

Remote control

Front panel

Press SPEAKERS A or B (or press AMP to

select the AMP mode, then press SPEAKERS

A or B on the remote control).

Each press turns the respective speakers on or off.

AMP

SPEAKERS

Remote control

Front panel

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

■

To adjust the tone

Select a sound field program if desired.

Use PROGRAM (or press AMP to select the AMP

mode, then press one of the sound field program

buttons) to select a sound field program. See page 49

for details about sound field programs.

You can adjust the tonal quality

of your front left and right,

TONE CONTROL

center, and subwoofer speakers or

headphones (when connected).

Press TONE CONTROL on the

front panel repeatedly to select

TREBLE or BASS, then rotate

PROGRAM to the right or left to

increase or decrease.

PROGRAM

•

Select TREBLE to adjust the

high frequency response.

Select BASS to adjust the low

frequency response.

Front panel

•

Speaker and headphone adjustments are stored independently.

STEREO

MUSIC ENTERTAIN MOVIE

Notes

AMP

STANDARD SELECT EXTD SUR. PURE DIRECT

•

TONE CONTROL is not effective during playback in the PURE

DIRECT mode, or when MULTI CH INPUT is selected

(page 35).

SPEAKERS

NIGHT

ENT

CHP/INDEX

Remote control

•

When TONE BYPASS is set to “AUTO” (page 61), and BASS

and TREBLE are set to

dB, audio output automatically

bypasses this unit's tone control circuitry.

■

To listen with headphones

(“SILENT CINEMA”)

■

To mute the sound

Press MUTE on the remote control.

The MUTE indicator flashes in the

front panel display.

To resume the audio output, press

MUTE again (or press VOL –/+).

The MUTE indicator disappears

from the display.

“SILENT CINEMA” allows you to enjoy multi-channel

music or movie sound, including Dolby Digital and DTS

surround, through ordinary headphones. “SILENT

CINEMA” activates automatically whenever you connect

headphones to the PHONES jack while listening to

CINEMA DSP or HiFi DSP sound field programs. When

activated, the “SILENT CINEMA” indicator lights up in

the front panel display.

MUTE

You can adjust the muting level (see page 61).

Notes

•

This unit will not be set to “SILENT CINEMA” when MULTI

CH INPUT is selected as the input source.

“SILENT CINEMA” is not effective when PURE DIRECT or

the 2ch Stereo program is selected, or in STRAIGHT mode.

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

Selecting MULTI CH INPUT

Press MULTI CH INPUT (or MULTI CH IN on the

remote control) so that “MULTI CH INPUT” appears in

the front panel display and video monitor.

■

Selecting sound field programs

■

Front panel operation

MULTI CH

INPUT

MULTI CH IN

VOLUME

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

SEAR

CAT

ORY

LEVEL

AUT

MONO

Front panel

Remote control

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

MULTI CH I NPUT

PROGRAM

Note

Rotate PROGRAM to select the desired program.

The name of the selected program appears in the front

panel display and video monitor.

When “MULTI CH INPUT” is shown in the front panel display,

no other source can be played. To select another input source with

INPUT (or one of the input selector buttons), press MULTI CH

INPUT (or MULTI CH IN on the remote control) to turn off

“MULTI CH INPUT” in the front panel display.

PROGRAM

■

Playing video sources in the

background

You can combine a video image from a video source with

sound from an audio source. For example, you can enjoy

listening to classical music while viewing beautiful

scenery from the video source on the video monitor.

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

PHONO

VOLUME

HiFi DSP

TV Sports

Use the input selector buttons on the remote

control to select a video source, then select an

audio source.

Program name

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

V-AUX

DTV/CBL

TUNER

Audio sources

Video sources

VCR

DVD

Note

If you want to enjoy audio from the MULTI CH INPUT jacks

together with video source, first select the video source, then

press MULTI CH INPUT (or MULTI CH IN on the remote

control).

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

Enjoying multi-channel software

■

Remote control operation

■

If you connected a surround back speaker, use this feature

to enjoy 6.1/7.1-channel playback for multi-channel

sources using the Dolby Pro Logic IIx, Dolby Digital EX

or DTS-ES decoders.

LEVEL

TITLE

PRESET/CH

TV VOL

SET MENU

MUTE

TRANSMIT

RE-NAME

CLEAR

LEARN

TV INPUT

SRCH MODE

A/B/C/D/E

SYSTEM

POWER

TV MUTE

ENTER

STANDBY

SLEEP

INPUT MODE

ON SCREEN STRAIGHT

DISPLA

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

TV VOL

PRESET

RETURN

MEMORY

EFFECT

V-AUX

TUNER

STEREO

MUSIC ENTERTAIN MOVIE

Sound field

program

buttons

Press AMP to select the AMP mode, then press

EXTD SUR. on the remote control to switch

between 5.1 and 6.1/7.1-channel playback.

DTV/CBL

VCR

DVD

STANDARD SELECT EXTD SUR. PURE DIRECT

SPEAKERS

NIGHT

ENT

CHP/INDEX

SELECT

AMP

POWER

AMP

REC

EXTD SUR.

AMP

AUDIO

Press AMP to select the AMP mode, then press

one of the sound field program buttons to select

the desired program.

The name of the selected program appears in the front

panel display.

To select a decoder, press

PLIIxMusic (etc.) is displayed.

repeatedly when

PRESET

TV VOL

STEREO

MUSIC ENTERTAIN MOVIE

TV MUTE

ENTER

AMP

STANDARD SELECT EXTD SUR. PURE DIRECT

TV VOL

PRESET

SPEAKERS

NIGHT

ENT

CHP/INDEX

Auto (AUTO)

When a signal (flag) that can be recognized by the unit is

input, the unit selects the optimum decoder for playing

back the signal in 6.1/7.1 channels.

If the unit cannot recognize the flag or no flag is present in

the input signal, it cannot automatically be played in 6.1/

7.1 channels.

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

PHONO

VOLUME

HiFi DSP

TV Sports

Program name

Decoders (select with

i )

Choose a sound field program based on your listening preference,

and not on the name of the program.

You can select from the following decoders depending on

the format of the software you are playing.

PLI

xMovi

Notes

For playing back Dolby Digital or DTS signals in 6.1/7.1

channels using the Pro Logic IIx movie decoder.

•

When you select an input source, this unit automatically selects

the last sound field program used with that source.

Sound field programs cannot be selected when MULTI CH

INPUT is selected.

Sampling frequencies higher than 48 kHz (except for DTS 96/

24 signals) will be sampled down to 48 kHz, then sound field

programs will be applied.

PLI

xMus i

For playing back Dolby Digital or DTS signals in 6.1/7.1

channels using the Pro Logic IIx music decoder.

EX/ ES

For playing back Dolby Digital signals in 6.1/7.1 channels

using the Dolby Digital EX decoder.

DTS signals are played back in 6.1/7.1 channels using the

DTS-ES decoder.

For playing back Dolby Digital or DTS signals in 6.1/7.1

channels using the Dolby Digital EX decoder.

Off (OFF)

Decoders are not used to create 6.1/7.1 channels.

When “SUR.

L/R SP” is set to SMLx1 or LRGx1 (see

page 58), the surround back channel will be output from the left

SURROUND BACK speaker terminals.

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

Notes

When you select the SUR. STANDARD program:

PRO LOGI

Dolby Pro Logic processing for any sources.

PLI Movi

Dolby Pro Logic II processing for movie software.

PLI Mus i

Dolby Pro Logic II processing for music software.

PLI Ga me

Dolby Pro Logic II processing for game software.

PLI Movi

Dolby Pro Logic IIx processing for movie software.

PLI Mus i

Dolby Pro Logic IIx processing for music software.

PLI Ga me

Dolby Pro Logic IIx processing for game software.

Ne o: Ci ne ma

DTS processing for movie software.

Ne o: Mus i

•

Some 6.1-channel compatible discs do not have

which this unit can automatically detect. When playing these

kinds of discs with 6.1-channel, select decoder (PLIIx Movie,

PLIIx Music, EX/ES or EX) manually.

signal (flag)

•

6.1-channel playback is not possible even if EXTD SUR. is

pressed in the following cases:

– When “SUR. L/R SP” (see page 57) or “SUR.

page 58) is set to NONE.

– When the source connected to the MULTI CH INPUT jack is

being played.

– When the source being played does not contain surround left

and right channel signals.

L/R SP” (see

– When Dolby Digital KARAOKE source is being played.

– When “2ch Stereo” or PURE DIRECT is selected.

When the power of this unit is turned off, this setting will be

reset to AUTO.

The Pro Logic IIx decoder is not available when “SUR.

SP” is set to NONE (see page 58).

•

L/R

PLIIxMovie cannot be selected when “SUR. B L/R SP” is set to

SMLx1 or LRGx1 (see page 58).

■

Enjoying 2-channel software in surround

Signals input from 2-channel sources can also be played

back on multiple channels.

DTS processing for music software.

Press AMP to select the AMP mode, then press

STANDARD on the remote control to switch

between the SUR. STANDARD and SUR.

ENHANCED programs.

When you select the SUR. ENHANCED or MOVIE

THEATER program:

PRO LOGI

Dolby Pro Logic processing for any sources.

STANDARD

AMP

PLI Movi

Dolby Pro Logic II processing for movie software.

PLI Movi

Dolby Pro Logic IIx processing for movie software.

Ne o: Ci ne ma

Or press MOVIE to select the MOVIE THEATER

program.

MOVIE

DTS processing for movie software.

You can also select

decoder by pressing

on the remote

Press SELECT on the remote control to select

the decoder.

control when the decoder type is displayed in the short message

display.

Note

SELECT

The Pro Logic IIx decoder is not available when “SUR.

SP” is set to NONE (see page 59).

L/R

You can select from the following modes depending on the

type of software you are playing and your personal

preference.

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

■

Listening to high fidelity stereo sound

(PURE DIRECT)

■

Night listening modes

The night listening modes are designed to improve

listenability at lower volumes or at night. Choose either

NIGHT:CINEMA or NIGHT:MUSIC depending on the

type of material you are playing.

PURE DIRECT allows you to bypass this unit’s decoders

and DSP processors, and turn off the video circuitry and

front panel display to enjoy pure high fidelity sound from

analog and PCM sources.

Press AMP to select the AMP mode, then press

NIGHT repeatedly on the remote control to select

cinema or music.

When night listening is selected, the NIGHT indicator in

the front panel display lights up.

Press PURE DIRECT (or press AMP to select the

AMP mode, then press PURE DIRECT on the

remote control) to activate pure direct.

The indicator around the front panel button lights up.

AMP

NIGHT

PURE DIRECT

AMP

PURE DIRECT

ENT.

CHP/INDEX

Front panel

Remote control

•

Select NIGHT:CINEMA when watching films to

reduce the dynamic range of film soundtracks and

make dialog easier to hear at lower volumes.

Select NIGHT:MUSIC when listening to music sources

to preserve ease-of-listening for all sounds.

The front panel display switches on momentarily when an

operation is performed.

•

Select OFF if you do not want to use this function.

To cancel, press PURE DIRECT again.

The indicator around the front panel button goes out and

the previous settings are restored.

Press

to adjust the effect level while

NIGHT:CINEMA or NIGHT:MUSIC is displayed.

This adjusts the level of compression.

Notes

PRESET

TV VOL

•

To avoid unexpected noise, do not play DTS-encoded CDs in

this mode.

TV MUTE

ENTER

•

When a multi-channel signal (Dolby Digital or DTS) is input,

this unit automatically switches to the corresponding analog

input.

No sound will be output from the subwoofer.

The following operations are not possible during PURE

DIRECT operation:

TV VOL

PRESET

•

Remote control

Ef f e c t . Lvl : MI D

– switching the sound field program

– displaying the OSD

– adjusting SET MENU parameters

– all video functions (video conversion etc.)

PURE DIRECT is automatically cancelled whenever this unit is

set to the standby mode.

•

Select MIN for minimum compression.

Select MID for standard compression.

Select MAX for maximum compression.

•

NIGHT:CINEMA and NIGHT:MUSIC adjustments are stored

independently.

Notes

•

You cannot use the night listening modes with PURE DIRECT

or MULTI CH INPUT.

The night listening modes may vary in effectiveness depending

on the input source and surround sound settings you use.

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

Downmixing to 2 channels

■

Listening to unprocessed input signals

You can enjoy 2-channel stereo playback even from multi-

channel sources.

In STRAIGHT mode, two channel stereo sources are

output from only the front left and right speakers. Multi-

channel sources are decoded straight into the appropriate

channels without any additional effect processing.

Rotate PROGRAM (or press AMP to select the

AMP mode, then press STEREO on the remote

control) to select 2ch Stereo.

Press STRAIGHT to select STRAIGHT.

STRAIGHT

PROGRAM

STRAIGHT

STEREO

AMP

EFFECT

Front panel

Remote control

Front panel

STRAI GHT

Press STRAIGHT (EFFECT) again so that “STRAIGHT”

disappears from the display when you want to turn the

sound effect back on.

2c h St e r e o

You can use

subwoofer with this program when SWFR or

BOTH is selected in “BASS OUT”.

■

Virtual CINEMA DSP

Virtual CINEMA DSP allows you to enjoy the CINEMA

DSP programs without surround speakers. It creates

virtual speakers to reproduce the natural sound field.

If you set “SUR. L/R SP” to NONE (see page 57), Virtual

CINEMA DSP activates automatically whenever you

select a CINEMA DSP sound field program.

Note

Virtual CINEMA DSP will not activate, even when “SUR. L/R

SP” is set to NONE (see page 57) in the following cases:

– When MULTI CH INPUT is selected as the input source.

– When headphones are connected to the PHONES jack.

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

Notes

Selecting input modes

This unit comes with a variety of input jacks. Do the

following to select the type of input signals you want to

use.

•

When playing

to DTS.

DTS-CD/LD, be sure to set the INPUT MODE

•

If the digital output data of the player has been processed in any

way, you may not be able to perform DTS decoding even if you

make

digital connection between this unit and the player

depending on the player.

Rotate INPUT (or press one of the input

selector buttons on the remote control) to

select the input source.

■

Displaying information about the input

source

You can display the type, format and sampling frequency

of the current input signal.

INPUT

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

V-AUX

DTV/CBL

TUNER

Select the input source.

VCR

DVD

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

Front panel

Remote control

V-AUX

DTV/CBL

TUNER

VCR

DVD

Press INPUT MODE to select an input mode.

In most cases, use AUTO.

INPUT MODE

Press STRAIGHT.

INPUT MODE

STRAIGHT

EFFECT

Front panel

Remote control

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

PHONO

VOLUME

STRAI GHT

Input source

Input mode

AUTO

Automatically selects input signals in

the following order:

1) Digital signals

2) Analog signals

DTS

Selects only digital signals encoded in

DTS. If no DTS signals are input, no

sound is output.

ANALOG

Selects only analog signals. If no

analog signals are input, no sound is

output.

If this unit detects Dolby Digital or DTS signal, the

decoder automatically switches to the appropriate

decoder.

You can adjust the default input mode of this unit (see page 63).

om Www.Somanuals.com. All Manuals Search And

PLAYBACK

Press

to display the following

information about the input signal.

PRESET

TV VOL

TV MUTE

ENTER

TV VOL

PRESET

(Format)

Signal format display. When the unit

cannot detect a digital signal it

automatically switches to analog input.

Number of source channels in the input

signal. For example, a multi-channel

soundtrack with 3 front channels, 2

surround channels and LFE, is

displayed as “3/2/LFE”.

Sampling frequency. When the unit is

unable to detect the sampling

frequency “Unknown” appears.

Bit rate. When the unit is unable to

detect the bit rate “Unknown” appears.

Flag data encoded with DTS or Dolby

Digital signals that cue this unit to

automatically switch decoders.

a t

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

Automatic and manual tuning

There are 2 tuning methods; automatic and manual.

Automatic tuning is effective when station signals are

strong and there is no interference.

Press TUNING MODE (AUTO/MAN’L MONO)

so that the AUTO indicator lights up in the

front panel display.

TUNING MODE

AUTO

AUTO/MAN'L MONO

DISPLAY

Lights up

■

Automatic tuning

If a colon (:) appears in the front panel display, tuning

is not possible. Press PRESET/TUNING (EDIT) to

turn the colon (:) off.

VOLUME

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

SEAR

ORY

LEVEL

DISPLAY

AUTO/MAN'L MONO

PRESET/TUNING

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

EDIT

SEARCH MODE

SILENT CINEMA

R/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R TUNER

AUTO TUNED

Rotate INPUT to select TUNER as the input

source.

Press PRESET/TUNING

automatic tuning.

once to begin

INPUT

Press h to tune into

higher frequency, or press l

to tune into a lower frequency.

PRESET/TUNING

LEVEL

Press FM/AM to select the reception band.

“FM” or “AM” appears in the front panel display.

R/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R TUNER

AUTO TUNED

FM/AM

When tuned into a station, the TUNED indicator

lights up and the frequency of the received station is

shown in the front panel display.

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

■

Manual tuning

Presetting stations

If the signal from the station you want to select is weak,

tune into it manually. Manually tuning into an FM station

will automatically switch the tuner to monaural reception

to increase the signal quality.

■

Automatically presetting FM stations

You can use the automatic preset tuning feature to store

FM stations. This function enables this unit to

automatically tune into FM stations with strong signals,

and to store up to 40 (8 stations in 5 groups, A1 through

E8) of those stations in order. You can then recall any

preset station easily by selecting the preset station number.

Select TUNER and the reception band

following steps 1 and 2 as described in

“Automatic tuning”.

Press TUNING MODE (AUTO/MAN’L MONO)

so that the AUTO indicator disappears from

the front panel display.

VOLUME

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

SEAR

ORY

LEVEL

AUTO

MONO

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

TUNING MODE

VIDEO AUX

UDIO

AUTO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

AUTO/MAN'L MONO

DISPLAY

Disappears

If a colon (:) appears in the front panel display, tuning

is not possible. Press PRESET/TUNING (EDIT) to

turn the colon (:) off.

Press FM/AM to select the FM band.

PRESET/TUNING

FM/AM

EDIT

SEARCH MODE

Press TUNING MODE (AUTO/MAN’L MONO)

so that the AUTO indicator lights up in the

front panel display.

R/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R TUNER

AUTO TUNED

TUNING MODE

AUTO

Press PRESET/TUNING

the desired station manually.

to tune into

AUTO/MAN'L MONO

DISPLAY

Lights up

Hold down the button to

continue searching.

If a colon (:) appears in the front panel display, tuning

is not possible. Press PRESET/TUNING (EDIT) to

turn the colon (:) off.

PRESET/TUNING

LEVEL

PRESET/TUNING

EDIT

SEARCH MODE

R/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R TUNER

AUTO TUNED

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

Manually presetting stations

■

Press and hold MEMORY (MAN’L/AUTO FM)

for more than 3 seconds.

You can also store up to 40 stations (8 stations in 5 groups,

A1 through E8) manually.

The preset number, the MEMORY and AUTO

indicators flash. After about 5 seconds, automatic

presetting starts from the frequency currently

displayed and proceeds toward the higher

frequencies.

VOLUME

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMOR

TUNING MODE

SEAR

ORY

LEVEL

AUTO

MONO

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

MEMORY

MAN'L/AUTO FM

2,5

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

AUTO TUNED

MEMORY

PHONO

VOLUME

Tune into a station.

See page 39 for tuning instructions.

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

PHONO

VOLUME

When automatic preset tuning is completed, the front

panel display shows the frequency of the last preset

station.

Notes

When tuned into a station, the front panel display

shows the frequency of the station received.

•

Any stored station data existing under

preset number is

cleared when you store new station under that preset number.

•

If the number of received stations does not reach 40 (E8),

automatic preset tuning has automatically stopped after

searching all stations.

Only FM stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you

want to store is weak in signal strength, tune into it manually,

and store it by following the procedure in “Manually presetting

stations”.

Press MEMORY (MAN’L/AUTO FM).

The MEMORY indicator flashes for about 5 seconds.

•

MEMORY

MAN'L/AUTO FM

Flashes

Automatic preset tuning options:

You can select the preset number from which this unit will

store FM stations and/or begin tuning toward lower

frequencies.

After pressing MEMORY in step 3:

Press A/B/C/D/E (NEXT) repeatedly to select

a preset station group (A to E) while the

MEMORY indicator is flashing.

The group letter appears. Check that the colon (:)

appears in the front panel display.

Press A/B/C/D/E, then PRESET/TUNING l

select the preset number under which the first station

will be stored. Automatic preset tuning will stop when

stations have all been stored up to E8.

A/B/C/D/E

CAT^NE^EG^XO^TRY

Press PRESET/TUNING (EDIT) to turn off the colon

(:) and then press PRESET/TUNING l to begin

tuning toward the lower frequencies.

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

MEMORY

PHONO

VOLUME

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is set in the standby

mode, the power cord is disconnected from the AC

outlet, or the power supply is temporarily cut due to

power failure. However, if the power is cut for more

than one week, the preset stations may be cleared. If

so, store the stations again by using the presetting

station methods.

Preset group

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

Selecting preset stations

You can tune any desired station simply by selecting the

preset station number under which it was stored.

Press PRESET/TUNING

preset station number (1 to 8) while the

MEMORY indicator is flashing.

Press h to select a higher preset station number.

Press l to select a lower preset station number.

to select a

VOLUME

PRESET/TUNING

OPTIMIZER MIC

LEVEL

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

SEAR

ITMODE

ORY

LEVEL

DISPLAY

AUTO/MAN'L MONO

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

MEMORY

PHONO

VOLUME

Preset number

LEVEL

PRESET

TV VOL

SET MENU

MUTE

TITLE

TV INPUT

SRCH MODE

A/B/C/D/E

TV MUTE

ENTER

Press MEMORY (MAN’L/AUTO FM) on the

front panel while the MEMORY indicator is

flashing.

ON SCREEN STRAIGHT

DISPLA

TV VOL

PRESET

RETURN

MEMORY

EFFECT

The station band and

frequency appear in the front

When performing this operation with the remote control, first

press TUNER to set the remote to tuner mode.

MEMORY

panel display with the preset

group and number you have

selected.

MAN'L/AUTO FM

Press A/B/C/D/E (NEXT) (or A/B/C/D/E

the remote control) to select the preset

station group.

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

MEMORY

PHONO

VOLUME

The preset group letter appears in the front panel

display and changes each time you press the button.

PRESET

TV VOL

Shows the displayed station has been stored as C3.

A/B/C/D/E

TV MUTE

ENTER

Repeat steps 1 to 5 to store other stations.

CAT^NE^EG^XO^TRY

TV VOL

PRESET

Notes

•

Any stored station data existing under

preset number is

Front panel

Remote control

cleared when you store new station under that preset number.

The reception mode (stereo or monaural) is stored along with

the station frequency.

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

Exchanging preset stations

You can exchange the assignment of two preset stations

with each other. The example below describes the

procedure for exchanging preset station “E1” with “A5”.

Press PRESET/TUNING

(or PRESET on the remote control) to

select a preset station number (1 to 8).

The preset group and number appear on the front

panel display along with the station band, frequency

and the TUNED indicator lights up.

PRESET

TV VOL

VOLUME

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

PRESET/TUNING

SEAR

ORY

LEVEL

AUTDO/IMSAPNL'LAMYONO

TV MUTE

ENTER

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

LEVEL

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

TV VOL

PRESET

Front panel

Remote control

2,4 1,3 1,3

Select preset station “E1”.

See “Selecting preset stations”.

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

Press and hold PRESET/TUNING (EDIT) for

more than 3 seconds.

“E1” and the MEMORY indicator flash in the front

panel display.

PRESET/TUNING

EDIT

SEARCH MODE

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

MEMORY

Select preset station “A5” using A/B/C/D/E

and PRESET/TUNING

“A5” and the MEMORY indicator flash in the front

panel display.

PRESET/TUNING

A/B/C/D/E

LEVEL

CAT^NE^EG^XO^TRY

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

MEMORY

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

Receiving Radio Data System

stations

Press PRESET/TUNING (EDIT) again.

The stations stored at the two preset assignments are

exchanged.

Radio Data System is a data transmission system used by

FM stations in many countries. The Radio Data System

function is carried out among the network stations.

This unit can receive various Radio Data System data such

as PS (Program Service name), PTY (Program Type), RT

(Radio Text), CT (Clock Time), EON (Enhanced Other

Networks) when receiving Radio Data System

broadcasting stations.

PRESET/TUNING

EDIT

SEARCH MODE

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

■

PS (Program Service name) mode

The name of the Radio Data System station being received

is displayed.

■

PTY (Program Type) mode

There are 15 program types to classify Radio Data System

stations.

NEWS

AFFAIRS

INFO

News

Current affairs

General information

Sports

SPORT

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

Education

Drama

Culture

Science

Light entertainment

Pops

POP

ROCK

Rock

M.O.R.

Middle-of-the-road music

(easy-listening)

LIGHT

Light classics

Serious classics

Other music

CLASSICS

OTHER

■

RT (Radio Text) mode

Information about the program (such as the title of the

song or name of the singer) on the Radio Data System

station being received is displayed using a maximum of 64

alphanumeric characters, including the umlaut symbol. If

other characters are used for RT data, they are displayed

with an underbar (_).

■

CT (Clock Time) mode

The current time is displayed and updated every minute.

If the data are accidentally cut off, “CT WAIT” may

appear.

■

EON (Enhanced Other Networks)

See “EON function” on page 47.

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

Notes

Changing the Radio Data System

mode

Four modes are available for displaying Radio Data

System data. The PS, PTY, RT and/or CT indicators that

correspond to the Radio Data System data services offered

by the station light up in the front panel display.

•

Do not press FREQ/TEXT until Radio Data System indicator

lights up in the front panel display. You cannot change the mode

if you press the button prior to this. This is because this unit has

not finished receiving all of the Radio Data System data from

the station.

•

Radio Data System data not offered by the station cannot be

selected.

This unit cannot utilize the Radio Data System data source if

the signal received is not strong enough. In particular, the RT

Press TUNER on the remote control to set

this unit to tuner mode.

mode requires large amount of data, so it is possible that the

RT mode may not be displayed even if other Radio Data System

modes (PS, PTY, etc.) are displayed.

TUNER

•

Radio Data System data may not be received under poor

reception conditions. In such cases, press TUNING MODE

(AUTO/MAN’L MONO) so that the AUTO indicator

disappears from the front panel display. Although this will

change the reception mode to manual, Radio Data System data

may be displayed when you change the display to Radio Data

System mode.

Press FREQ/TEXT repeatedly on the remote

control to display the various Radio Data

System data offered by the transmitting

station.

If the signal strength is weakened by external interference

during the reception of Radio Data System station, the Radio

Data System data service may be cut off suddenly and

“...WAIT” will appear in the front panel display.

FREQ/TEXT

Remote control

PTY

Frequency display

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

PTY SEEK function

If you select the desired program type, this unit

automatically searches all preset Radio Data System

stations that are broadcasting a program of the required

type.

Press PRESET/TUNING

CH u / d on the remote control) to select the

desired program type.

The selected program type appears in the front panel

display.

(or PRESET/

PRESET/TUNING

LEVEL

VOLUME

Front panel

POP

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMOR

TUNING MODE

SEARC

ITMODE

ORY

LEVEL

DISPLAY

AUTO/MAN'L MONO

PROGRAM

INPUT

PRESET

TV VOL

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

TV MUTE

ENTER

TV VOL

PRESET

Remote control

REC

AUDIO

DISC SKIP

VOL

1,3

PTY SEEK

Press PTY SEEK START on the remote

control to begin searching all preset Radio

Data System stations.

The selected program type flashes and the PTY

HOLD indicator lights up in the front panel display

while searching for stations.

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

TITLE

TV INPUT

SRCH MODE

A/B/C/D/E

TV MUTE

ENTER

ON SCREEN STRAIGHT

DISPLA

TV VOL

PRESET

RETURN

MEMORY

EFFECT

To cancel searching, press PTY SEEK START again.

When performing this operation with the remote control, first

press TUNER to set the remote to tuner mode.

PTY HOLD

MODE

START

PTY SEEK

Lights up

Press PTY SEEK MODE on the remote

control to set this unit in the PTY SEEK

mode.

The program type of the station being received or

“NEWS” flashes in the front panel display.

To exit from the PTY SEEK mode, press PTY SEEK

MODE again.

Remote control

•

The unit stops searching when it finds a station

broadcasting the selected type of program.

If the found station is not the one you desire, press

PTY SEEK START again. This unit resumes

searching for another station broadcasting the same

type of program.

MODE

START

PTY SEEK

Remote control

Flashes

om Www.Somanuals.com. All Manuals Search And

FM/AM TUNING (RX-V757 ONLY)

To cancel this function

Press EON repeatedly until no program type name is

shown in the front panel display.

■

EON function

This function uses the EON data service on the Radio

Data System station network. If you select the desired

program type (NEWS, INFO, AFFAIRS or SPORT), this

unit automatically searches for all preset Radio Data

System stations that are scheduled to broadcast the

selected type of program and switches from the station

currently being received to the new station when the

broadcast starts.

REC

AUDIO

DISC SKIP

VOL

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

TITLE

TV INPUT

SRCH MODE

A/B/C/D/E

TV MUTE

ENTER

ON SCREEN STRAIGHT

DISPLA

TV VOL

PRESET

RETURN

MEMORY

EFFECT

When performing this operation with the remote control, first

press TUNER to set the remote to tuner mode.

Note

This function can only be used when a Radio Data System station

that offers the EON data service is being received. When such

station is being received, the EON indicator lights up in the front

panel display.

Check that the EON indicator is lit in the front

panel display.

If the EON indicator is not lit up, tune into another

Radio Data System station so that the EON indicator

lights up.

Press EON repeatedly on the remote control

to select the desired program type (NEWS,

INFO, AFFAIRS or SPORT).

The selected program type name appears in the front

panel display.

EON

Remote control

•

If a preset Radio Data System station type starts

broadcasting the selected type of program, the unit

automatically switches from the program being

received to that program. (The EON indicator

flashes.)

When broadcasting of the selected program ends,

the unit returns to the previous station (or another

program on the same station).

om Www.Somanuals.com. All Manuals Search And

RECORDING

Recording adjustments and other operations are

performed from the recording components. Refer to the

operating instructions for those components.

Notes

•

When this unit is set in the standby mode, you cannot record

between other components connected to this unit.

The setting of TONE CONTROL, VOLUME, “SPEAKER

LEVEL” (page 59) and programs does not affect recorded

material.

•

VOLUME

•

source connected to the MULTI CH INPUT jacks of this unit

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMOR

TUNING MODE

SEAR

ITMODE

LEVEL

AUTDO/IMSAPNL'LAYMONO

cannot be recorded.

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

S-video and composite video signals pass independently

through this unit’s video circuits. Therefore, when recording or

dubbing video signals, if your video source component is

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

connected to provide only an S-video (or only composite

video) signal, you can record only an S-video (or only

composite video) signal to your VCR.

•

Digital signals input to the DIGITAL INPUT jacks are not

output to the analog AUDIO OUT (L/R) jacks for recording.

Likewise, analog signals input to the AUDIO IN (L/R) jacks are

not output to the DIGITAL OUTPUT jack. Therefore, if your

source component is connected to provide only digital (or

analog) signals, you can only record digital (or analog) signals.

TRANSMIT

RE-NAME

CLEAR

LEARN

SYSTEM

POWER

STANDBY

SLEEP

INPUT MODE

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

V-AUX

TUNER

DTV/CBL

VCR

DVD

•

given input source is not output on the same REC OUT

channel. (For example, the signal input from VCR IN is not

output on VCR OUT.)

SELECT

Check the copyright laws in your country to record from

records, CDs, radio, etc. Recording of copyrighted material may

infringe copyright laws.

Turn on the power of this unit and all

connected components.

If you playback a video source that uses scrambled or

encoded signals to prevent it from being dubbed, the

picture itself may be disturbed due to those signals.

Select the source component you want to

record from.

INPUT

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

■

Special considerations when recording

DTS software

V-AUX

DTV/CBL

TUNER

VCR

DVD

The DTS signal is a digital bitstream. Attempting to

digitally record the DTS bitstream will result in noise

being recorded. Therefore, if you want to use this unit to

record sources that have DTS signals recorded on them,

the following considerations and adjustments need to be

made.

For DVDs and CDs encoded with DTS, when your player

is compatible with the DTS format, follow its operating

instructions to make a setting so that the analog signal will

be output from the player.

Front panel

Remote control

Start playback (or select a broadcast station)

on the source component.

Start recording on the recording component.

test recording before you start an actual recording.

om Www.Somanuals.com. All Manuals Search And

SOUND FIELD PROGRAM DESCRIPTIONS

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from

almost any sound source (stereo or multi-channel). This unit is also equipped with a YAMAHA digital sound field

processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.

Most of these sound field programs are precise digital recreations of actual acoustic environments found in famous

concert halls, music venues, and movie theaters.

The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set the input mode to

AUTO (see page 37) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal.

Notes

•

This unit’s DSP sound field programs are recreations of real-world acoustic environments made from precise measurements taken in

the actual hall, etc. Thus you may notice variations in the strength of the reflections coming from the front, back, left and right.

•

Feel free to choose sound field program based on your listening preference, and not purely on the name of the program itself.

For movie/video sources

You can select from the following sound fields when playing movie or video sources. The sound fields marked “MULTI”

can be used with multi-channel sources, like DVD, digital TV, etc. Those marked “2-CH” can be used with 2-channel

(stereo) sources like TV programs, video tapes, etc.

Program selection methods vary depending on sound field program types. For details on how to

select sound field programs, see “Selecting sound field programs” on pages 32 to 36.

Remote

control

button

Program

Features

Sources

Downmixes multi-channel sources to

sources as is.

channel (left and right) or plays back 2-channel

STEREO:

2c h St e r e o

This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at

an actual jazz or rock concert.

USI C:

POP/ ROCK

Though the presence sound field is relatively narrow, the surround sound field employs the

ENTERTAI NMENT:

sound environment of large concert hall. This effect enhances the experience of watching

TV Spor

various TV programs such as news, variety shows, music programs or sports programs.

This program is provided for reproducing monaural video sources (such as old movies). The

program produces the optimum reverberation to create sound depth using only the presence

sound field.

ENTERTAI NMENT:

Mono Movi

This program adds deep and spatial feeling to video game sounds.

ENTERTAI NMENT:

Ga me

MULTI

2-CH

CINEMA DSP processing. This program creates the extremely wide sound field of 70-mm

OVI

THEATER:

movie theater. It precisely reproduces the source sound in detail, making both the video and

the sound field incredibly real. This is ideal for any kind of video source encoded with Dolby

Surround, Dolby Digital or DTS (especially large-scale movie productions).

Spe c t a c l

CINEMA DSP processing. This program clearly reproduces dialog and sound effects in the

Sc i

OVI

THEATER:

latest sound form for science fiction films, thus creating

broad and expansive cinematic

virtual-space sound field that

space amid silence. You can enjoy science fiction films in

includes Dolby Surround, Dolby Digital and DTS-encoded software employing the most

advanced techniques.

CINEMA DSP processing. This program is ideal for precisely reproducing the sound design

of the newest 70-mm and multi-channel soundtrack films. The sound field is made to be

similar to that of the newest movie theaters, so the reverberations of the sound field itself are

restrained as much as possible.

OVI

THEATER:

Adve nt ur

CINEMA DSP processing. This program is for reproducing sounds from 70-mm and multi-

THEATER:

channel soundtrack films, and is characterized by soft and extensive sound field.

OVI

Ge ne r a l

om Www.Somanuals.com. All Manuals Search And

SOUND FIELD PROGRAM DESCRIPTIONS

Remote

control

button

Program

Features

Sources

Standard processing for the selected decoder.

SUR. STANDARD

SUR. ENHANCED

MULTI

2-CH

Enhanced processing for the selected decoder.

om Www.Somanuals.com. All Manuals Search And

SOUND FIELD PROGRAM DESCRIPTIONS

For music sources

You can select from the following sound fields when playing music sources, like CD, FM/AM broadcasting, tapes, etc.

Program selection methods vary depending on sound field program types. For details on how to

select sound field programs, see “Selecting sound field programs” on pages 32 to 36.

Remote

control

button

Program

Features

Sources

2-channel (left and right) playback.

STEREO:

2c h St e r e o

2-CH

Use to increase the output stereo sources (in stereo) from all speakers. This provides

larger sound field and is ideal for background music at parties, etc.

STEREO:

7c h St e r e o

HiFi DSP processing.

seats. Pillars and ornate carvings create extremely complex reflections which produce

very full, rich sound.

classic shoe-box type concert hall with approximately 1700

Ha l

USI C:

Vi e nna

HiFi DSP processing. This is the sound field at stage front in “The Bottom Line”,

famous New York jazz club. The floor can seat 300 people to the left and right in

USI C:

The Bt

Li ne

sound field offering real and vibrant sound.

MULTI

2-CH

HiFi DSP processing. The ideal program for lively, dynamic rock music. The data for

this program was recorded at LA’s “hottest” rock club. The listener’s virtual seat is at

the center-left of the hall.

USI C:

The Roxy Tht

HiFi DSP processing. This program recreates the acoustic environment of

lively

ENTERTAI NMENT:

Di s c o

disco in the heart of big city. The sound is dense and highly concentrated. It is also

characterized by high-energy, “immediate” sound.

Standard processing for the selected decoder.

SUR. STANDARD

SUR. ENHANCED

MULTI

2-CH

Enhanced processing for the selected decoder.

om Www.Somanuals.com. All Manuals Search And

ADVANCED OPERATIONS

Selecting the OSD mode

Using the sleep timer

You can display this unit’s operating information on a

video monitor. If you display the SET MENU and sound

field program parameter settings on a monitor, it is much

easier to see the available options and parameters than it is

by reading this information on the front panel display.

Use this feature to automatically set this unit in the

standby mode after a certain amount of time. The sleep

timer is useful when you are going to sleep while this unit

is playing or recording a source. The sleep timer also

automatically turns off any external components

connected to AC OUTLET(S).

Turn on the video monitor connected to this

unit.

■

Setting the sleep timer

TRANSMIT

RE-NAME

CLEAR

LEARN

SYSTEM

POWER

Press ON SCREEN repeatedly to change the

OSD mode.

STANDBY

SLEEP

INPUT MODE

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

-AUX

TUNER

The OSD mode changes in the

ON SCREEN

DTV/CBL

VCR

DVD

following order: full display, short

display, and display off.

DISPLAY

SELECT

POWER

AMP

Full display

Always shows the sound field program parameter settings

as well as the contents of the front panel display.

Short display

Briefly shows the contents of the front panel display at the

bottom of the screen each time you operate this unit.

Select a source and start playback on the

source component.

Display off

Press SLEEP repeatedly to set

SLEEP

the amount of time.

Each time you press SLEEP, the front

panel display changes as shown

below. The SLEEP indicator flashes

while switching the amount of time

for the sleep timer.

Only operations performed using ON SCREEN are

displayed. The OSD is displayed when using SET MENU,

even if the OSD mode is set to “Display off”.

P04 MOVIE THEATER

.ꢀꢀꢀꢀꢀGeneral

ꢀꢀDSPꢀLEVEL;;;;0dB

ꢀꢀP.INIT.DLY;;15ms

ꢀꢀP.ROOMꢀSIZE;;1.0

ꢀꢀS.INIT.DLY;;20ms

ꢀꢀS.ROOMꢀSIZE;;1.0

P04ꢀꢀMOVIEꢀTHEATER

ꢀꢀꢀꢀꢀꢀꢀꢀGeneral

SLEEP 120min

SLEEP 90min

SLEEP 60min

SLEEP OFF SLEEP 30min

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

PHONO

VOLUME

Full display

Short display

HiFi DSP

SLEEP

Notes

•

The OSD signal is not output to the REC OUT jack, and will

not be recorded.

The SLEEP indicator lights up in the front panel

display, and the display returns to the selected sound

field program.

•

You can set the OSD to turn on (gray background) or off when a

video source is not being reproduced (or the source component

is turned off) by using “DISPLAY SET” (see page 64).

When using component video signals, the “Short display” is not

output to the COMPONENT VIDEO MONITOR OUT jacks.

To display the OSD with component video signal input, set the

OSD mode to “Full display” while GRAY BACK in DISPLAY

SET (see page 64) is set to AUTO.

SLEEP indicator

•

DVR/VCR2

VCR1

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER

TUNED

PHONO

VOLUME

SLEEP

TV Sports

om Www.Somanuals.com. All Manuals Search And

ADVANCED OPERATIONS

■

Canceling the sleep timer

Manually adjusting speaker levels

Press SLEEP repeatedly until “SLEEP OFF” appears in

the front panel display.

After a few seconds, “SLEEP OFF” disappears, and the

SLEEP indicator goes off.

You can adjust the output level of each speaker while

listening to a music source. This is also possible when

playing sources through the MULTI CH INPUT jacks.

Please note that this operation will override the level

adjustments made in “AUTO SETUP” (page 24),

“SPEAKER LEVEL” (page 59).

SLEEP

SLEEP OFF

POWER

AMP

The sleep timer setting can also be canceled by pressing

STANDBY on the remote control (or STANDBY/ON on the front

panel) to set this unit to the standby mode.

REC

AUDIO

DISC SKIP

VOL

FREQ/TEXT

EON

MODE

START

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

TITLE

TV INPUT

SRCH MODE

A/B/C/D/E

TV MUTE

ENTER

ON SCREEN STRAIGHT

DISPLA

TV VOL

PRESET

RETURN

MEMORY

EFFECT

Press AMP.

Press LEVEL repeatedly to select the

speaker you want to adjust.

FRONT

CENTER

FRONT

Front left speaker level

Center speaker level

Front right speaker level

Surround right speaker level

Surround left speaker level

Surround back right speaker level

Surround back left speaker level

Subwoofer level

SUR.

SUR. B.

SWFR

PRES.

Presence left speaker level

Presence right speaker level

Once you press LEVEL, you can also select the speaker by

pressing

Press

to adjust the speaker output level.

The control range is from +10 dB to –10 dB.

Press ENTER when you have completed your

adjustment.

This operation can also be performed using the controls on the

front panel. Press NEXT repeatedly to select the speaker you

want to adjust, then press LEVEL –/+ to adjust the output level.

om Www.Somanuals.com. All Manuals Search And

SET MENU

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this

unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening

environment.

■

AUTO SETUP

Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 24).

■

MANUAL SETUP

Use to manually adjust speaker and system parameters.

1 SOUND MENU

Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for

video signal processing delays when using LCD monitors or projectors.

Most of the parameters described in SOUND MENU are set automatically when you run auto setup (see page 24). You can use SOUND

MENU to make further adjustments, but we recommend running auto setup first.

Item

Features

Page

Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over

frequency.

A) SPEAKER SET

B) SPEAKER LEVEL

C) SP DI STANCE

D) EQUALI ZER

Adjusts the output level of each speaker.

Adjusts the delay time of each speaker.

Adjusts the tonal quality of the center speaker.

E) LFE LEVEL

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

Adjusts the dynamic range for Dolby Digital or DTS signals.

Customizes the muting level, audio delay and tone bypass settings.

F) DYNAMI

G) AUDI

RANGE

SET

2 INPUT MENU

Use to reassign digital input/outputs, select the input mode or rename your inputs.

Item Features

ASSI GNMENT Assigns jacks according to the component to be used.

Page

NPUT

NPUT RENAM

TRI

ODE

Selects the initial input mode of the source.

Changes the name of the inputs.

D) VOLUM

Adjusts the output volume of each jack.

om Www.Somanuals.com. All Manuals Search And

SET MENU

3 OPTION MENU

Use to adjust the optional system parameters.

Item

Features

Page

A) DI SPLAY SET

B) EMORY GUARD

C) PARAM. NI

Adjusts the brightness of the display and converts video signals.

Locks sound field program parameters and other SET MENU settings.

Initializes the parameters of

group of sound field programs.

Specifies the location of the speakers connected to the SPEAKERS

the ZONE speakers will be amplified.*

terminals or selects how

MULTI ZONE SET

* The Zone 2 amplifier feature is only available for RX-V757.

SIGNAL INFO

■

Use to check audio signal information (see page 37).

om Www.Somanuals.com. All Manuals Search And

SET MENU

Using SET MENU

Use the remote control to access and adjust each

parameter.

Press ENTER to enter MANUAL SETUP.

1 SOUND MENU appears on the front panel display.

PRESET

;MANUAL SETUP

.ꢀ1ꢀSOUNDꢀMENU

ꢀꢀ2ꢀINPUTꢀMENU

ꢀꢀ3ꢀOPTIONꢀMENU

TV VOL

POWER

AMP

TV MUTE

ENTER

REC

AUDIO

DISC SKIP

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[ENTER]:Enter

VOL

TV VOL

PRESET

FREQ/TEXT

EON

MODE

START

SET MENU

PTY SEEK

PRESET

LEVEL

MUTE

TITLE

TV INPUT

SRCH MODE

A/B/C/D/E

2,8

TV MUTE

ENTER

3-7

ON SCREEN STRAIGHT

DISPLA

TV VOL

PRESET

Press

to select the desired menu.

RETURN

MEMORY

EFFECT

STEREO

MUSIC ENTERTAIN MOVIE

STANDARD SELECT EXTD SUR. PURE DIRECT

Press ENTER to enter the selected menu.

SPEAKERS

NIGHT

ENT

CHP/INDEX

PRESET

SOUND MENU 1/2

TV VOL

ꢀꢀ.ꢀA)SPEAKERꢀSET

ꢀꢀꢀꢀB)SPEAKERꢀLEVEL

ꢀꢀꢀꢀC)SPꢀDISTANCE

ꢀꢀꢀꢀD)EQUALIZER

ꢀꢀꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀꢀꢀ[ENTER]:Enter

TV MUTE

ENTER

•

You can change SET MENU parameters while the unit is

reproducing sound.

TV VOL

PRESET

•

If you press

sound field program button during SET MENU

operation, the SET MENU is canceled.

Note

Press

and ENTER to select the

You cannot change some SET MENU parameters while the unit

is in either cinema or music night listening mode.

submenu, then press u / d to select the item

and

to change the parameter.

Press AMP.

AMP

B)SPEAKER LEVEL

ꢀꢀꢀꢀꢀꢀꢀ-ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ+

ꢀꢀ.ꢀꢀꢀFL

ꢀꢀꢀꢀꢀꢀFR

ꢀꢀꢀꢀꢀꢀ

Press SET MENU.

SET MENU

SRCH MODE

•

Repeat this operation to select and adjust each

setting.

To return to the previous menu level, press

RETURN.

Press

to select MANUAL SETUP.

PRESET

TV VOL

ꢀꢀSET MENU

ꢀꢀ;AUTOꢀSETUP

.ꢀ;MANUALꢀSETUP

.ꢀ;SIGNAL INFO.

To exit, press SET MENU when finished.

TV MUTE

ENTER

SET MENU

TV VOL

PRESET

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[ENTER]:Enter

SRCH MODE

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is in the standby mode.

However, if the power cord is disconnected from the

AC outlet, or the power supply is cut for more than one

week, the stored data will be lost. If so, adjust the

items again.

om Www.Somanuals.com. All Manuals Search And

SET MENU

Center speaker CENTER SP

Choices: LRG, SML, NONE

1 SOUND MENU

Use to manually adjust any speaker setting or compensate for

video signal processing delays when using LCD monitors or

projectors. Most of the SOUND MENU parameters are set

CENTER SP

automatically when you run auto setup (see page 24)

ꢀꢀꢀꢀꢀNONEꢀ)SMLꢀꢀLRG

SOUND MENU 1/2

ꢀꢀ.ꢀA)SPEAKERꢀSET

ꢀꢀꢀꢀB)SPEAKERꢀLEVEL

ꢀꢀꢀꢀC)SPꢀDISTANCE

ꢀꢀꢀꢀD)EQUALIZER

ꢀꢀꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀꢀꢀ[ENTER]:Enter

•

Select LRG if you have a large center speaker. The unit

directs the entire range of the center channel signal to

the center speaker.

Select SML if you have small center speaker. The unit

directs the low-frequency signals of the center channel to

the speakers selected with “LFE/BASS OUT”.

Select NONE if you do not have a center speaker. The

unit directs all of the center channel signal to the front

left and right speakers.

■

Speaker settings A) SPEAKER SET

Use to manually adjust any speaker setting.

If you are not satisfied with the bass sounds from your speakers,

you can change these settings according to your preference.

Surround left/right speakers SUR. L/

Choices: LRG, SML, NONE

Front speakers FRONT SP

Choices: LARGE, SMALL

SUR. L/R SP

FRONT SP

ꢀꢀꢀꢀꢀNONEꢀ)SMLꢀꢀLRG

ꢀꢀ ꢀꢀꢀꢀSMALLꢀ)LARGE

•

Select LRG if you have large surround left and right

speakers. The entire range of the surround channel

signal is directed to the surround left and right

speakers.

Select SML if you have small surround left and right

speakers. The low-frequency signals of the surround

channel are directed to the speakers selected with

“LFE/BASS OUT”.

Select NONE if you do not have surround speakers.

This will set the unit to the Virtual CINEMA DSP

mode (see page 36) and automatically set the surround

back speaker setting (SUR. B L/R SP) to NONE.

•

Select SMALL if you have small front speakers. The

unit directs the low-frequency signals of the front

channel to the speakers selected with “LFE/BASS

OUT”.

Select LARGE if you have large front speakers. The

unit directs the entire range of the front left and right

channel signals to the front left and right speakers.

om Www.Somanuals.com. All Manuals Search And

SET MENU

Surround back speakers SUR.

Bass out LFE/ BASS OUT

Choices: LRGx1, LRGx2, SMLx2, SMLx1, NONE

Low-frequency (bass) signals can be directed to the

subwoofer and/or the front left and right speakers

according to the characteristics of your system. This

setting also determines the routing of the LFE (low-

frequency effect) signals found in Dolby Digital or DTS

sources.

SUR.

L/R SP

Choices: SWFR, FRNT, BOTH

ꢀꢀꢀꢀꢀꢀSMLx1ꢀ)SMLx2

LFE/BASS OUT

•

Select LRGx1 if you have a large surround back

speaker. The unit directs the entire range of the

surround back channel signal to the left surround back

speaker.

Select LRGx2 if you have 2 large surround back

speakers. The unit directs the entire range of the

surround back channel signal to the surround back

speakers.

Select SMLx2 if you have 2 small surround back

speakers. The low-frequency signals of the surround

back channels are directed to the speakers selected with

“LFE/BASS OUT”.

Select SMLx1 if you have a small surround back

speaker. The low-frequency signals of the surround

back channel are directed to the speakers selected with

“LFE/BASS OUT”, and the rest of the frequency

signals are directed to the left surround back speaker.

Select NONE if you do not have a surround back

speaker. The unit directs all of the surround back

channel signal to the surround left and right speakers.

ꢀꢀꢀꢀꢀSWFRꢀFRNT)BOTH

•

Select SWFR if you connect a subwoofer. LFE and

low-frequency signals from other channels are directed

to the subwoofer according to the speaker settings.

Select FRNT if you do not use a subwoofer. LFE and

low frequency signals from other channels are directed

to the front speakers according to the speaker settings

(even if you have previously set front speakers to

SML).

Select BOTH if you connect a subwoofer and you want

to output low-frequency signals from front channels to

both the front speakers and subwoofer. LFE and low-

frequency signals from other channels are also directed

to the subwoofer according to the speaker settings. Use

this function to reinforce low-frequency signals using

the subwoofer when playing back sources such as CDs.

•

Note

Cross over CROSS OVER

If you select SMLx1 or LRGx1, connect the speaker to the left

SURROUND BACK speaker terminals.

Use this feature to select a cross-over (cut-off) frequency

for all low-frequency signals. All frequencies below the

selected frequency will be sent to the subwoofer.

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

Presence speakers PRESENCE SP

Choices: YES, NONE

PRESENCE SP

CROSS OVER

ꢀꢀꢀꢀꢀ)NONEꢀꢀꢀYES

ꢀꢀꢀꢀFREQ;;;80Hz

•

Select YES if you have presence speakers.

Select NONE if you do not have presence speakers.

When YES is selected, the unit automatically adjusts the dialog

lift parameter. To adjust it manually, see page 92.

om Www.Somanuals.com. All Manuals Search And

SET MENU

Subwoofer phase SUBWOOFER PHASE

If bass sounds are lacking or unclear, use this feature to

switch the phase of your subwoofer.

■

Speaker level B) SPEAKER LEVEL

Use these settings to manually balance the speaker level of

each speaker selected in SPEAKER SET (page 57).

Choices: –10.0 dB to +10.0 dB

Choices: NORMAL, REVERSE

Initial setting: 0 dB

02ASUBWOOFER PHASE

B)SPEAKER LEVEL

ꢀꢀꢀꢀꢀꢀꢀ-ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ+

ꢀꢀ.ꢀꢀꢀFL

ꢀꢀꢀꢀꢀꢀFR

ꢀꢀꢀꢀꢀꢀ

ꢀꢀꢀꢀ)NORMALꢀꢀREVERSE

•

Select NORMAL if you do not want to reverse the

phase of your subwoofer.

Select REVERSE to reverse the phase of your

subwoofer.

•

FL adjusts the balance of the front left speaker.

FR adjusts the balance of the front right speaker.

adjusts the balance of the center speaker.

SL adjusts the balance of the surround left speaker.

SR adjusts the balance of the surround right speaker.

Presence/Surround back channel priority

PRI ORI TY

SBL adjusts the balance of the surround back left

You can select to prioritize either the surround back or

presence speakers when playing sources that contain

surround back channel signals using CINEMA DSP sound

field programs.

speaker.

•

SBR adjusts the balance of the surround back right

speaker.

•

SWFR adjusts the balance of the subwoofer.

PL adjusts the balance of the presence left speaker.

PR adjusts the balance of the presence right speaker.

Choices: PRch, SBch

ꢀꢀꢀꢀ PRIORITY

ꢀꢀꢀꢀꢀꢀꢀ

Instead of SBL and SBR, SB will be displayed if you selected

only one surround back speaker in SUR.

L/R SP (page 58).

ꢀꢀꢀꢀ

PRch )SBch

•

Select PRch to use presence speakers even when

surround back channel signals are input. The signals

for the surround back channel will be output from

surround speakers.

Select SBch to use surround back speakers when a

surround back channel signal is detected in a CINEMA

DSP program. Presence channel signals will be output

from front speakers.

om Www.Somanuals.com. All Manuals Search And

SET MENU

Speaker distance C) SP DI STANCE

■

Center graphic equalizer D) EQUALI ZER

Use this feature to manually input the distance of each

speaker and adjust the delay applied to respective channel.

Ideally, each speaker should be the same distance from the

main listening position. However, this is not possible in

Use this feature to select the parametric (AUTO PEQ) or

graphic equalizer (CNTR GEQ).

Equalizer EQ TYPE SELECT

Select to change the type of equalizer used by this unit.

Choices: AUTO PEQ, CNTR GEQ, EQ OFF

most home situations. Thus, certain amount of delay

must be applied to the sound from each speaker so that all

sound will arrive at the listening position at the same time.

•

Select AUTO PEQ to use the equalizer adjusted in auto

setup.

•

Select CNTR GEQ to adjust the built-in 5-band graphic

equalizer so that the tonal quality of the center speaker

matches that of the front left and right speakers.

Select EQ OFF to cancel equalizing.

C)SP DISTANCE

ꢀꢀ. UNIT;;;;;;meters

ꢀꢀꢀꢀFRONTꢀL;;;;3.00m

ꢀꢀꢀꢀFRONTꢀR;;;;3.00m

ꢀꢀꢀꢀCENTER;;;;;3.00m

ꢀꢀꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀꢀꢀ[<]/[>]:Adjust

•

Center graphic equalizer CENTER GEQ

When CNTR GEQ is selected, use this feature to output a

test tone and adjust the tonal quality so that it matches that

of the front left speaker.

You can adjust 5 frequency bands:

100Hz, 300Hz, 1kHz, 3kHz, 10kHz

Choices: –6 to +6 dB

Unit UNI

Choices: meters (m), feet (ft)

•

Select meters to input speaker distances in meters.

Select feet to input speaker distances in feet.

Initial setting: 0 dB

Speaker distances

Choices: 0.3 to 24.0 m

D)EQUALIZER

ꢀꢀꢀꢀꢀꢀꢀ-ꢀꢀꢀꢀꢀꢀ+

ꢀꢀ100Hzꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ0dB

ꢀꢀ300Hzꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ0dB

ꢀꢀꢀ1kHzꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ0dB

ꢀꢀꢀ3kHzꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ0dB

ꢀꢀ10kHzꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ0dB

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[<]/[>]:Adjust

•

FRONT L adjusts the distance of the front left speaker.

Initial setting: 3.0

FRONT R adjusts the distance of the front right

speaker. Initial setting: 3.0 m

.ꢀTESTꢀꢀ)OFFꢀꢀON

CENTER adjusts the distance of the center speaker.

Initial setting: 3.0

•

Select ON to output test tones from the front left and

center speakers, and adjust the tonal quality of the

center speaker.

Select OFF to stop the test tone and output the

currently selected source component.

Press u / d to select a frequency band.

SUR. L adjusts the distance of the surround left

speaker. Initial setting: 3.0 m

SUR. R adjusts the distance of the surround right

speaker. Initial setting: 3.0 m

SB L adjusts the distance of the surround back left

•

speaker. Initial setting: 2.10 m

Press j

to adjust the selected frequency band.

SB R adjusts the distance of the surround back right

speaker. Initial setting: 2.10 m

SWFR adjusts the distance of the subwoofer. Initial

setting: 3.0 m

PRES L adjusts the distance of the presence left

speaker. Initial setting: 3.0 m

PRES R adjusts the distance of the presence right

speaker. Initial setting: 3.0 m

Instead of SB

and SB R, SUR.

will be displayed if you

selected only one surround back speaker in SUR.

(page 58).

L/R SP

om Www.Somanuals.com. All Manuals Search And

SET MENU

■

Low-frequency effect level E) LFE LEVEL

■

Audio settings G) AUDI

SET

Use to adjust the output level of the LFE (low-frequency

effect) channel according to the capacity of your

subwoofer or headphones. The LFE channel carries low-

frequency special effects which are only added to certain

scenes. This setting is effective only when this unit

decodes Dolby Digital or DTS signals.

Use to customize this units overall audio settings.

G)AUDIO SET

ꢀꢀ.ꢀMUTING TYPE;;FULL

ꢀꢀꢀꢀAUDIOꢀDELAY;;0ms

ꢀꢀꢀꢀTONE BYPASS;;AUTO

ꢀꢀꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀꢀꢀ[<]/[>]:Select

Choices: –20 to 0 dB

E)LFE LEVEL

.ꢀSPEAKER;;;;;;0dB

ꢀꢀHEADPHONE;;;;0dB

Muting type

MUTI NG TYPE

Use to adjust how much the mute function reduces the

output volume.

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[<]/[>]:Adjust

Choices: FULL, –20dB

•

Select FULL to completely halt all output of sound.

Select –20dB to reduce the current volume by 20 dB.

Speaker SPEAKER

Select to adjust the speaker LFE level.

Audio delay AUDI

DELAY

Use to delay the sound output and synchronize it with the

video image. This may be necessary when using certain

LCD monitors or projectors.

Headphone HEADPHONE

Select to adjust the headphone LFE level.

Choices: 0 to 160 ms

Note

Tone bypass TONE BYPASS

Use to select whether audio output bypasses tone control

circuitry when TREBLE and BASS are set to 0 dB (see

page 31).

Depending on the settings of “LFE LEVEL”, some signals may

not be output from the SUBWOOFER OUTPUT jack.

■

Dynamic range F) DYNAMI

RANGE

Choices: AUTO, OFF

Use to select the amount of dynamic range compression to

be applied to your speakers or headphones. This setting is

effective only when the unit is decoding Dolby Digital and

DTS signals.

Choices: MIN (minimum), STD (standard), MAX

(maximum)

•

Select AUTO if you want signals to bypass tone control

circuitry to provide the purest signal possible.

Select OFF if you do not want signals to bypass tone

control circuitry.

•

F)DYNAMIC RANGE

.ꢀSP:ꢀMINꢀSTD)MAX

ꢀꢀHP:ꢀMINꢀSTD)MAX

ꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀ[<]/[>]:Select

Speaker SP

Select to adjust the speaker compression.

Headphone HP

Select to adjust the headphone compression.

•

Select MIN if you regularly listen at low volume levels.

Select STD for general use.

Select MAX to preserve the greatest amount of

dynamic range.

om Www.Somanuals.com. All Manuals Search And

SET MENU

For OPTICAL INPUT jack 2 (OPTI CAL

(OPTI CAL 3) ) and 4 (OPTI CAL

Choices: (2) PHONO, CD, (TUNER*), MD/CD-R, DVD,

DTV/CBL, VCR1, DVR/VCR2

(

2) ),

4) )

2 INPUT MENU

Use to reassign digital input/outputs, select the input mode

or rename your inputs.

(

(3) PHONO, CD, (TUNER*), MD/CD-R, DVD,

DTV/CBL, VCR1, DVR/VCR2

(4) PHONO, CD, (TUNER*), MD/CD-R, DVD,

DTV/CBL, VCR1, DVR/VCR2

ꢀꢀꢀꢀ2ꢀINPUTꢀMENU

ꢀꢀ.ꢀA)I/OꢀASSIGNMENT

ꢀꢀꢀꢀB)INPUTꢀMODE

ꢀꢀꢀꢀC)INPUTꢀRENAME

ꢀꢀꢀꢀD)VOLUME TRIM

ꢀꢀꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀꢀꢀ[ENTER]:Enter

* DSP-AX757SE only

ꢀꢀꢀꢀOPTICALꢀIN

ꢀꢀ.ꢀ(2);;;;;MD/CD-R

(MD/CD-Rꢀ)

■

Input/output assignment

(3);;;;; DVD

ꢀꢀꢀ(ꢀꢀDVD ꢀꢀ)

(4);;;;;DTV/CBL

ASSI GNMENT

ꢀꢀꢀ(DTV/CBL

)

You can assign jacks according to the component to be

used if this unit’s initial settings do not correspond to your

needs. Change the following parameters to reassign the

respective jacks and effectively connect more components.

Once the inputs have been reassigned, you can select the

corresponding component by using INPUT on the front

panel or the input selector buttons on the remote control.

For COAXIAL INPUT jacks 5 (COAXI AL

and 6 (COAXI AL 6) )

Choices: (5) PHONO, CD, (TUNER*), MD/CD-R, DVD,

DTV/CBL, V-AUX, VCR1, DVR/VCR2

(6) PHONO, CD, (TUNER*), MD/CD-R, DVD,

DTV/CBL, V-AUX, VCR1, DVR/VCR2

* DSP-AX757SE only

(

5) )

(

For COMPONENT VIDEO jacks A (CMPNT-

NPUT A] ) and B (CMPNT- NPUT B] )

[

Choices: [A] DVD, DTV/CBL, V-AUX, VCR1,

DVR/VCR2

[B] DVD, DTV/CBL, V-AUX, VCR1,

DVR/VCR2

ꢀꢀꢀꢀCOAXIALꢀIN

ꢀꢀ.ꢀ(5);;;;;

(

)

(6);;;;; DVD

ꢀꢀꢀ(ꢀꢀDVD ꢀꢀ)

ꢀꢀꢀꢀCMPNT-VꢀINPUT

ꢀꢀ.ꢀ[A];;;;;ꢀꢀDVD

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ(ꢀꢀDVDꢀꢀꢀ)

ꢀꢀꢀꢀ[B];;;;;DTV/CBL

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ(DTV/CBLꢀ)

Notes

•

You cannot select

type of jack.

specific item more than once for the same

•

When you connect component to both the COAXIAL and

OPTICAL jacks, priority is given to the input signals from the

COAXIAL jack.

For OPTICAL OUTPUT jack 1 (OPTI CAL OUT

(

1) )

Choices: PHONO, CD, MD/CD-R, DVD, DTV/CBL,

V-AUX, VCR1, DVR/VCR2

ꢀꢀꢀꢀOPTICALꢀOUT

ꢀꢀ.ꢀ(1);;;;;MD/CD-R

(MD/CD-R

)

om Www.Somanuals.com. All Manuals Search And

SET MENU

■

Input mode B)

NPUT

MODE

■

Volume Trim D) VOLUM

TRI

Use this feature to designate the input mode for sources

connected to the DIGITAL INPUT jacks when you turn on

this unit (see page 37 for details about the input mode).

Choices: AUTO, LAST

Use this feature to adjust the level of the signal input to

each jack. This is useful if you want to balance the level of

each input source to avoid sudden changes in volume

when switching between input sources.

Choices: PHONO, CD, MD/CD-R, TUNER, DVD,

DTV/CBL, V-AUX, VCR1, DVR/VCR2

ꢀꢀꢀꢀB)INPUTꢀMODE

ꢀꢀꢀꢀꢀ)AUTOꢀꢀLAST

ꢀꢀꢀꢀ[<]/[>]:Select

ꢀꢀꢀꢀ[ENTER]:Return

•

Select AUTO to allow this unit to automatically detect

the type of input signal and select the appropriate input

mode.

Select LAST to set this unit to automatically select the

last input mode used for that source.

Note

Even if LAST is selected, the last setting for the EX/ES button

will not be recalled.

■

Input rename C)

NPUT RENAM

Use this feature to change the name of the inputs on the

OSD and front panel display.

ꢀꢀꢀꢀC)INPUTꢀRENAME

ꢀꢀꢀꢀꢀDVDꢀ->ꢀꢀDVD

ꢀꢀꢀꢀ[<]/[>]:Position

ꢀꢀꢀꢀ[ꢀ]/[ꢀ]:Chara.

Press an input selector button to select the

input you want to change the name of.

Press AMP.

Press

to place the _ (under-bar) under

the space or the character you want to edit.

Press u / d to select the character you want,

then use

to move to the next space.

You can use up to 8 characters for each input.

Press to change the character in the following

order, or press to go in the reverse order:

•

A to Z, a space, 0 to 9, a space, a to z, a space,

symbols (#, *, –, +, etc.)

Repeat steps 1 through 4 to rename each

input.

To exit, press SET MENU when finished.

om Www.Somanuals.com. All Manuals Search And

SET MENU

Gray back GRAY BACK

3 OPTION MENU

Use to adjust the optional system parameters.

Selecting AUTO for the on-screen display setting displays

a gray background when there’s no video signal input.

Nothing is displayed if OFF is selected.

Choices: AUTO, OFF

ꢀꢀꢀꢀ3ꢀOPTIONꢀMENU

ꢀꢀ.ꢀA)DISPLAYꢀSET

B)MEMORYꢀGUARD

Notes

•

When only the component video signals are input, the OSD is

not displayed if GRAY BACK is set to OFF. To display the

OSD with component video signal input, set GRAY BACK to

AUTO while the OSD mode (see page 52) is set to “Full

display”.

C)PARAM.ꢀINI

D)MULTI ZONEꢀSET

ꢀꢀꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀꢀꢀ[ENTER]:Enter

•

When video signals are not being input, set GRAY BACK to

AUTO to display the OSD.

■

Display settings A) DI SPLAY SET

Component OSD CMPNT OSD

Use this feature to turn on/off OSD output to the

COMPONENT VIDEO MONITOR OUT jacks when

using the SET MENU.

ꢀꢀꢀꢀA)DISPLAYꢀSET

ꢀꢀ.ꢀDIMMER;;;;;;;;;0

ꢀꢀꢀꢀVIDEOꢀCONV.;;;ON

ꢀꢀꢀꢀOSD SHIFT;;;;;;0

ꢀꢀꢀꢀGRAYꢀBACK;;;AUTO

ꢀꢀꢀꢀCMPNTꢀOSD;;;;;ON

ꢀꢀꢀꢀ[ꢀ]/[ꢀ]:Up/Down

ꢀꢀꢀꢀ[<]/[>]:sELECT

Choices: ON, OFF

•

Select ON to output the OSD signals from

COMPONENT VIDEO MONITOR OUT jacks.

Select OFF if you do not want to output the OSD

signals from COMPONENT VIDEO MONITOR OUT

jacks.

•

Dimmer DI

Use to adjust the brightness of the front panel display.

Choices: –4 to 0

Note

SET MENU functions even when OFF is selected.

Video conversion VI DEO CONV.

Use this feature to turn on/off conversion of composite

(VIDEO) signals to both S-video and component signals.

This allows you to output converted video signals from the

S VIDEO or COMPONENT VIDEO jacks when no

S-video or component signals are input. This feature also

converts S-video signals to component signals when no

component signals are input.

■

Memory guard B) EMORY GUARD

Use this feature to prevent accidental changes to DSP

program parameter values and other system settings.

Choices: OFF, ON

ꢀꢀꢀꢀB)MEMORYꢀGUARD

ꢀꢀꢀꢀꢀꢀꢀ)OFFꢀꢀꢀON

Choices: ON, OFF

•

Select OFF not to convert any signals (except S-video

signals to composite signals).

ꢀꢀꢀꢀ[<]/[>]:Select

ꢀꢀꢀꢀ[ENTER]:Return

•

Select ON to convert composite signals to S-video and

component signals, and to convert S-video signals to

component signals.

•

Regardless of the setting, S-video signals are always

converted to composite signals.

Select ON to protect:

•

DSP program parameters

All SET MENU items

All speaker levels

The on-screen display (OSD) mode

Notes

•

Converted video signals are only output to the MONITOR OUT

jacks. When recording you must make the same type of video

connections (i.e., S-video) between each component.

Note

•

When converting composite video or S-video signals from

VCR to component video signals, the picture quality may suffer

depending on your VCR.

When MEMORY GUARD is set to ON, you cannot select any

other SET MENU items.

OSD shift OSD SHI FT

Use to adjust the vertical position of the OSD.

Choices: +5 (downward) to –5 (upward)

•

Press + to lower the position of the OSD.

Press to raise the position of the OSD.

–

om Www.Somanuals.com. All Manuals Search And

SET MENU

■

Parameter initialization C) PARAM.

Notes

Use this feature to initialize the parameters for each sound

field program within a sound field program group. When

•

If you connect headphones to the PHONES jack on the unit

when “SP B” is set to ZONE B, the sound is output from both

headphones and SPEAKERS B.

you initialize sound field program group, all of the

parameter values within that group revert to their initial

settings.

Press the corresponding numeric button for the sound field

program that you want to initialize.

Choices:

•

DSP program is selected when “SP B” is set to ZONE B,

the unit automatically enters the Virtual CINEMA DSP mode.

Zone 2 amplifier ZONE2 AM

(RX-V757 only)

An asterisk (*) appears next to program numbers that have

been changed from their initial settings.

Choices: STEREO, MUSIC, ENTERTAINMENT,

MOVIE, STANDARD

Use to select how the ZONE 2 speakers will be amplified.

Choices: INT, EXT

ꢀꢀꢀꢀD)MULTI ZONEꢀSET

ꢀꢀ.ꢀSPꢀB;;;;;;;;FRONT

ꢀꢀꢀꢀZONE2 AMP;;;;;EXT

ꢀꢀꢀꢀC)PARAM.ꢀINI

STEREO

ꢀꢀꢀꢀ[<]/[>]:Select

ꢀꢀꢀꢀ[ENTER]:Return

*MUSIC

ENTERTAINMENT

MOVIE THEATER

*STANDARD

•

Select EXT if you do not use Zone

connect your Zone 2 speakers through an external amplifiers

connected to this unit’s ZONE OUTPUT jacks.

Select INT to use this unit’s internal amplifier if you

connect your Zone 2 speakers directly to this unit’s

PRESENCE/ZONE 2 speaker terminals.

speakers or if you

Press DSP Key

Notes

•

You cannot automatically revert to the previous parameter

settings once you initialize a sound field program group.

You cannot separately initialize individual sound field

programs.

You cannot initialize any program groups when “MEMORY

GUARD” is set to ON.

•

■

Zone set D)

MULTI ZONE SET

Use to specify the location of speakers connected to the

SPEAKERS B terminals.

ꢀꢀꢀꢀD)MULTI ZONEꢀSET

ꢀꢀ.ꢀSPꢀB;;;;;;;;FRONT

ꢀꢀꢀꢀZONE2 AMP;;;;;EXT

ꢀꢀꢀꢀ[<]/[>]:Select

ꢀꢀꢀꢀ[ENTER]:Return

Speaker B setting SP

Use this feature to select the location of the front speakers

connected to the SPEAKERS B terminals.

Choices: FRONT, ZONE B

•

Select FRONT to turn on/off SPEAKERS A and B

when the speakers connected to the SPEAKERS B

terminals are set in the main room.

•

Select ZONE B if the speakers connected to the

SPEAKERS B terminals are set in another room. If

SPEAKERS A is turned OFF and SPEAKERS B is

turned ON, all the speakers including the subwoofer in

the main room are muted and the unit outputs sound

from SPEAKERS B only.

om Www.Somanuals.com. All Manuals Search And

ADVANCED SETUP MENU

The ADVANCED SETUP menu is displayed in the front

panel display.

Press STRAIGHT (EFFECT) repeatedly to

toggle between the available parameters.

•

During the advanced setup procedure, audio output is muted.

During the advanced setup procedure, only the STANDBY/ON,

STRAIGHT (EFFECT) buttons, and PROGRAM selector on

the front panel are available for operation.

STRAIGHT

EFFECT

CAUTION

Be sure to set the speaker impedance before using this unit

to play back audio or video signals.

Press STANDBY/ON to confirm your

selection.

STANDBY

/ON

VOLUME

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMORY

TUNING MODE

SEAR

CAT

ORY

LEVEL

AUTO

This completes the advanced setup procedure.

The settings you made are reflected the next time this

unit’s power is turned on.

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VIDEO AUX

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

1,4

1,3

Turn off the power to this unit, and while

holding down STRAIGHT (EFFECT), press

STANDBY/ON.

This unit turns on, and the ADVANCED SETUP

menu appears in the front panel display.

STRAIGHT

While holding

STANDBY

/ON

down, press

EFFECT

Rotate PROGRAM to move through the menu

and select the item you want to set up.

See the end of this section for a complete list of

available parameters.

PROGRAM

om Www.Somanuals.com. All Manuals Search And

ADVANCED SETUP MENU

Remote REMOTE

■

ADVANCED SETUP menu items

Change the initial settings (indicated in bold under each

parameter) to reflect the needs of your listening

environment.

Use to switch the ID for the remote control of this unit.

Choices: ID1, ID2

•

Select ID1 to operate this unit using the default code.

Select ID2 to operate this unit using an alternative

code.

Speaker impedance SP

MP.

Use to switch the speaker impedance for this unit.

Note

Choices: 8 ! MIN$%4 !%MIN

•

Select 8 !%MIN%to set the speaker impedance to 8 !.

Select 4 !%MIN to set the speaker impedance to 4 !.

You must also make settings for the remote control (see page 69).

SP IMP.

Speaker

Impedance level

If you use one set (A or B),

the impedance of each

speaker must be

higher.

Front

If you use two sets (A and

B), the impedance of each

!%&'(

speaker must be

higher.

Center

Surround

The impedance of each

speaker must be

higher.

Surround back

If you use one set (A or B),

the impedance of each

speaker must be

higher.

Front

If you use two sets (A and

B), the impedance of each

!%&'(

speaker must be 16

higher.

Center

Surround

The impedance of each

speaker must be

higher.

Surround back

Factory presets PRESET

Use to reset all parameters to the factory presets (see

page 91).

Choices: CANCEL, RESET

•

Select CANCEL if you do not want this unit’s

parameters to be initialized when you reset the factory

presets.

•

Select RESET if you want all of this unit’s parameters

to be initialized when you reset the factory presets.

Note

This setting does not affect ADVANCED SETUP menu item

parameters.

om Www.Somanuals.com. All Manuals Search And

REMOTE CONTROL FEATURES

In addition to controlling this unit, the remote control can also operate other A/V components made by YAMAHA and

other manufacturers. To control other components, you must set up remote control with the appropriate remote control

codes. This remote control also has a learn feature which allows the remote to acquire functions from other remote

controls equipped with an infrared remote control transmitter.

Control area

■

Controlling this unit

■

Controlling other components

The shaded areas below can be used to control this unit

after pressing AMP to activate the AMP mode.

The shaded areas below can be used to control other

components. Each button has a different function

depending on the selected component. Select the

component you want to control by pressing an input

selector button or SELECT k /n . The name of the selected

component appears in the display window.

TRANSMIT

RE-NAME

CLEAR

LEARN

The buttons in the

dotted lines control

this unit in any

mode (SYSTEM

POWER,

SYSTEM

POWER

STANDBY

SLEEP

INPUT MODE

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

V-AUX

DTV/CBL

TUNER

The A/B and input selector

buttons switch the function

of the component control

area below.

STANDBY,

VCR

DVD

SLEEP, INPUT

MODE, MULTI CH

IN, VOL +/–,

MUTE,

SELECT

^*Use the A/B buttons to

TRANSMIT

RE-NAME

CLEAR

LEARN

control other components

regardless of whether they

are connected to this unit.

Factory setting:

A...LD player

B...CD recorder

SYSTEM

POWER

STRAIGHT and

input selector

buttons).

POWER

AMP

STANDBY

SLEEP

INPUT MODE

Press AMP

to control

this unit.

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

REC

AUDIO

DISC SKIP

V-AUX

DTV/CBL

TUNER

VOL

FREQ/TEXT

EON

VCR

DVD

SELECT k /n switches

control to another

MODE

START

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

component without

changing the input source

on this unit.

TITLE

TV VOL

SELECT

TV INPUT

SRCH MODE

A/B/C/D/E

TV MUTE

ENTER

POWER

AMP

ON SCREEN STRAIGHT

POWER

TV VOL

PRESET

REC

RETURN

DISPLAY

AUDIO

MEMORY

EFFECT

DISC SKIP

STEREO

MUSIC ENTERTAIN MOVIE

REC

AUDIO

VOL

DISC SKIP

STANDARD SELECT EXTD SUR. PURE DIRECT

FREQ/TEXT

EON

MUTE

SPEAKERS

NIGHT

LEVEL

TITLE

PRESET/CH

SET MENU

ENT

CHP/INDEX

TV VOL

MODE

START

PTY SEEK

SRCH MODE

BAND

TV INPUT

LEVEL

SET MENU

PRESET

TITLE

A-E/CAT

TV VOL

TV MUTE

TV INPUT

SRCH MODE

ENTER

Component control

area

TV MUTE

ON SCREE_ENN_TERSTRAIGHT

TV VOL

RETURN

DISPLAY

You can control up to 11

different components by

setting appropriate remote

control codes (see

page 69).

MEMORY

EFFECT

ON SCREEN

TV VOL

MUSIC ENTERTAIN MOVIE

RETURN DISPLAY

STEREO

2_MEMORY

PRESET

MUSIC ENTERTAIN MOVIE

Fixing the remote to AMP mode

STEREO

STANDARD SELECT EXTD SUR. PURE DIRECT

You can fix the remote permanently to AMP mode (fixed AMP

mode) so that the shaded areas above always control this unit.

This is useful, if you primarily want to use the remote control in

STANDARD SELECT EXTD SUR. PURE DIRECT

SPEAKERS

NIGHT

ENTER

CHP/INDEX

SPEAKERS

NIGHT

ENT

CHP/INDEX

AMP mode. To fix AMP mode, hold down AMP for at least

seconds so that “A:___” appears in the display window.

A: DVD

Fixed AMP mode

DVD

Component control mode

To temporarily switch to component control mode, press AMP.

To cancel fixed AMP mode, hold down AMP for at least

seconds.

om Www.Somanuals.com. All Manuals Search And

REMOTE CONTROL FEATURES

Setting remote control codes

You can control other components by setting the

appropriate manufacturer codes. Codes can be set up for

each input area.

Press and hold LEARN for about 3 seconds

using a ballpoint pen or similar object.

“SETUP” and the selected component name appear

alternately in the display window.

The following table shows the factory preset component

(Library: component category) and the remote control

code for each area.

LEARN

Remote Control Code Default Settings

Component

Input area

category

(Library)

Manufacturer

Be sure to press and hold LEARN for at least 3

seconds, otherwise the learning process will start.

CD-R

Yamaha

PHONO

V-AUX

TUNER

MD/CD-R

–

Complete each of the following steps in 30 seconds.

Otherwise, the learning mode will be automatically

canceled. In this case, press LEARN again.

VCR

TUNER

Yamaha-3

Yamaha-1

–

If you want to change a library (component

category), press

i . You can set a different

type of component.

DTV/CBL

Library choices: L:DVD, L:DVR, L:LD, L:CD,

L:CDR, L:MD, L:TAP (tape), L:TUN, L:AMP*,

L:TV, L:CAB (cable), L:DBS, L:SAT, L:VCR

The amplifier Library (L:AMP) code is preset to “ID1” to

operate this unit. However, you can switch between the

following two codes if necessary.

VCR

DVR

DVD

–

DVR/VCR2

DVD

Yamaha

Yamaha-1

Note

You may not be able to operate your YAMAHA component even

The initial setting for “Amplifier library” is “ID1”.

if YAMAHA remote control code is initially set as listed above.

In this case, try to set other YAMAHA remote control code(s).

AMP library

code

(remote

control

setting)

Remote

control ID

(this unit’s

setting: see

page 67)

Function

Press an input selector button to select the

source component you want to set up.

ID1

To operate this unit using the

(initial setting) default code.

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

ID1

(initial

setting)

ID1Z

To operate this unit using the

V-AUX

DTV/CBL

TUNER

default code.

To operate Zone

or Zone

VCR

DVD

features (see page 76).

(RX-V757 only)

To operate this unit using an

alternative code.

ID2

To operate this unit using an

alternative code.

ID2

ID2Z

To operate Zone

or Zone

features (see page 76).

(RX-V757 only)

When using multiple YAMAHA receivers/amplifiers, you may be

able to operate the other components simultaneously with the

default code setting. In this case, set one of the alternative codes

to operate this unit separately

om Www.Somanuals.com. All Manuals Search And

REMOTE CONTROL FEATURES

Press

to select the name of your

Press LEARN again to exit from the setup

mode.

component’s manufacturer.

You will find the names of most worldwide audio-

video manufacturers in alphabetical order in the

display window.

LEARN

Notes

PRESET

TV VOL

•

The supplied remote control does not contain all possible

manufacturer codes for commercially available AV components

(including YAMAHA AV components). If operation is not

possible with any of the manufacturer codes, program the new

remote control function with the Learn feature (see below) or

use the remote control supplied with the component.

TV MUTE

ENTER

TV VOL

PRESET

•

If you have already programmed a remote control function for

button, the function by learning programming takes priority

over the setup remote control code’s function.

“ERROR” appears in the display window if you press button

not indicated in the respective step, or when you press more

than one button at the same time.

Press one of the buttons shaded below to

see if you can control your component. If you

can, the remote control code is correct.

POWER

AMP

REC

AUDIO

DISC SKIP

VOL

FREQ/TEXT

EON

MODE

START

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

TITLE

TV VOL

TV INPUT

SRCH MODE

•

If the manufacturer of your component has more than one

codes, try each of them until you find the correct one.

•

If you continuously want to set up code for another

component, press TV MUTE/ENTER and repeat steps 1, 3

and 4.

om Www.Somanuals.com. All Manuals Search And

REMOTE CONTROL FEATURES

Controlling other components

Once you set the appropriate remote control codes, you

can use this remote to control your other components.

Note that some buttons may not correctly operate the

selected component. Use the input selector buttons to

select the component you want to operate. The remote

control automatically switches to the appropriate control

mode for that component.

POWER

AMP

REC

AUDIO

DISC SKIP

VOL

FREQ/TEXT

EON

MODE

START

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

TITLE

TV VOL

TV INPUT

SRCH MODE

A/B/C/D/E

TV MUTE

ENTER

ON SCREEN STRAIGHT

TV VOL

PRESET

RETURN

DISPLAY

MEMORY

EFFECT

STEREO

MUSIC ENTERTAIN MOVIE

STANDARD SELECT EXTD SUR. PURE DIRECT

SPEAKERS

NIGHT

ENT.

CHP/INDEX

DVD player/

DVD recorder

Digital TV/

Cable TV

MD/CD

recorder

VCR

LD player

CD player

Tuner

AV POWER

TV POWER

Power

VCR power

TV power

Power

TV power

Disc skip (player)

Rec (recorder)

REC/DISC

SKIP

Rec

VCR rec

Disc skip

Play

Rec (MD)

Play

VCR play

Play

VCR search

backward

Search backward

Search forward

Search backward

Search forward

Search backward

Search forward

Search backward

Search forward

VCR search

Search forward

forward

AUDIO

Audio

Sound

Pause

VCR pause

Pause

Skip backward

Skip forward

Stop

Skip backward

Skip forward

Stop

Skip backward

Skip forward

Stop

Skip backward

Skip forward

Stop

VCR stop

TV input

TITLE/

TV INPUT

Title

TV input

TV mute

TV input

TV mute

TV input

TV mute

TV input

TV mute

TV MUTE/

ENTER

Select

TV mute

TV volume

Preset up (1

Preset down (1

Preset up (A

–

TV VOL

–

TV volume

–

Down

Right

Left

TV volume

TV channel

–

TV volume

TV channel

–

TV volume

TV channel

–

TV volume

TV channel

–

VCR channel

–

Return

RETURN

1-9, 0, +10

Numeric buttons

Preset stations (1-8)

Display

Enter

Display

Index

Display

Index

DISPLAY

ENT.

Title/Index

Enter

Chapter/Time

^*1This button functions only when the original remote control of the component has POWER button.

^*2These buttons can operate your TV without switching the input if the remote control code is set in DTV/CBL or PHONO. When the

remote control code for your TV is set up in both the DTV/CBL and PHONO areas, priority is given to the signal in the DTV/CBL

area.

^*3These buttons can operate your VCR without switching the input to VCR

if the remote control code is set in VCR 1.

om Www.Somanuals.com. All Manuals Search And

REMOTE CONTROL FEATURES

Programming codes from other

remote controls

If you want to program functions not included in the basic

operations covered by the remote control code, or an

appropriate remote control code is not available, do the

following. You can program any of the buttons available in

the component control area (see page 68). The buttons can

be programmed independently for each component.

Press LEARN using a ballpoint pen or similar

object.

Do not press and hold LEARN. If you hold it down

for more than three seconds, the remote enters the

remote control code setting mode.

LEARN

Note

This remote control transmits infrared rays. If the other remote

control also uses infrared rays, this remote control can learn most

of its functions. However, you may not be able to program some

special signals or extremely long transmissions. (Refer to the

operating instructions for the remote control of your component.)

Flashes alternately

Complete each of the following steps in 30 seconds.

Otherwise, the learning mode will be automatically

canceled. In this case, press LEARN again.

Press an input selector button to select a

source component.

Press the button at which you want to

program the new function.

“LEARN” is displayed.

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

V-AUX

DTV/CBL

TUNER

VCR

DVD

Place this remote control about 5 to 10 cm

apart from the other remote control on a flat

surface so that their infrared transmitters are

aimed at each other.

Press and hold the button you want to

program on the other remote control until

“OK” appears in the display window.

to 10 cm

om Www.Somanuals.com. All Manuals Search And

REMOTE CONTROL FEATURES

Notes

Changing source names in the

•

“NG” appears in the display window if programming was

unsuccessful. In this case, start over from step 4.

This remote control can learn approximately 120 functions.

However depending on the signals learned, “FULL” may

appear in the display before you program 120 functions. In this

case, clear unnecessary programmed functions to make room

for further learning.

display window

•

You can change the name that appears in the display

window on the remote control if you want to use a

different name to the one that is set as the factory preset.

This is useful when you have set the input selector to

control a different component.

Repeat steps 4 and 5 to program additional

functions.

Press an input selector button to select the

source component you want to rename.

The selected component name appears in the display

window.

Press LEARN again to exit from the learning

mode.

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

V-AUX

DTV/CBL

TUNER

LEARN

VCR

DVD

Notes

•

Press RE-NAME using a

ballpoint pen or similar

object.

Learning may not be possible in the following cases:

– When the batteries in the remote control for this unit or other

components are weak.

RE-NAME

– When the distance between the two remote controls is too

great or too small.

– When the remote control infrared windows are not facing at

the appropriate angle.

Press

to select and enter a character.

Pressing d changes the character as follows:

– When the remote control is exposed to direct sunlight.

– When the function to be programmed is continuous or

uncommon.

A to Z, a to z, 0 to 9, space, -(hyphen), and /(slash).

(Pressing u changes the characters in reverse order.)

•

“ERROR” appears in the display window if you press more than

one button at the same time.

PRESET

TV VOL

TV MUTE

ENTER

TV VOL

PRESET

Press

position.

to move the cursor to the next

PRESET

TV VOL

TV MUTE

ENTER

TV VOL

PRESET

If you want to continue setting up names for other

components, press TV MUTE/SELECT and repeat steps 1,

and 4.

Press RE-NAME again to exit from the

renaming mode.

RE-NAME

om Www.Somanuals.com. All Manuals Search And

REMOTE CONTROL FEATURES

Clearing function sets

You can clear all changes made in each function set, such

as learned functions, renamed source names and setup

manufacturer codes.

Press CLEAR to exit from the clearing mode.

Once you have cleared a learned function for a

button, the button reverts to the factory preset setting.

CLEAR

Press CLEAR by using a ballpoint pen or

similar object.

Note

“ERROR” appears in the display window under the following

circumstances:

CLEAR

– When

button other than the cursor is pressed.

– When more than one button is pressed at the same time.

Complete each of the following steps in 30 seconds. Other

wise, the learning mode will be automatically canceled. In

this case, press CLEAR again.

Press

to select the clear mode.

component)

L: DVD (L: name of

Clears all learned functions in the respective

component control area. Press an input selector

button to select the component.

L: AMP

Clears all learned functions for this unit’s control

area.

L: ALL Clears all learned functions.

RNAM Clears all renamed source names.

FCTRY Clears all remote functions and returns the remote

to the factory settings.

Press and hold CLEAR again for about 3

seconds.

“C:OK” appears in the display window.

CLEAR

Note

“C:NG” appears in the display window if the operation is

unsuccessful. In this case, start over from step 2.

om Www.Somanuals.com. All Manuals Search And

REMOTE CONTROL FEATURES

Clearing individual functions

Repeat step 3 to clear other learned

functions.

■

Clearing a learned function

You can clear the function learned in a certain

programmed button in each area.

Press LEARN again to exit.

Press an input selector button to select the

source component containing the function

you want to clear.

The selected component name appears in the display

window.

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

V-AUX

DTV/CBL

TUNER

VCR

DVD

Press LEARN using a ballpoint pen or similar

object.

“LEARN” and the selected component name appear

alternately in the display window.

LEARN

Complete each of the following steps in 30 seconds.

Otherwise the learning mode will be automatically canceled.

In this case, press LEARN again.

Press and hold CLEAR using a ballpoint pen

or similar object, then press the button you

want to clear for about 3 seconds.

“C:OK” appears in the display window.

TRANSMIT

RE-NAME

CLEAR

LEARN

SYSTEM

POWER

STANDBY

SLEEP

INPUT MODE

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

-AUX

TUNER

DTV/CBL

VCR

DVD

When you clear a learned function, the button reverts

to the factory preset setting (or manufacturer setting if

you have set manufacturer codes).

om Www.Somanuals.com. All Manuals Search And

ZONE

(RX-V757 ONLY)

ZONE 2 (RX-V757 ONLY)

This unit allows you to configure a multi-room audio system. You can control this unit from the second room using the

supplied remote control.

Only analog signals are sent to the second room. Any source you want to listen to in the second room must be

connected using the analog (AUDIO L/R) input jacks on this unit.

Zone 2 connections

You need the following additional equipment to use the multi-room functions of this unit:

•

An infrared signal receiver in the second room.

An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second

room to the main room (to a CD player, for example).

•

An amplifier and speakers for the second room.

•

Since there are many possible ways to connect and use this unit in a multi-room installation, we recommend that you consult with your

nearest authorized YAMAHA dealer or service center about the Zone

connections that best meet your requirements.

•

Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products,

you may not need to use an infrared emitter. Up to

YAMAHA components can be connected as shown.

REMOTE

CONTROL OUT

OUT

This unit

•

■

System configuration and connections example

ZONE

OUTPUT

Amplifier

DVD player

(or other component)

This unit

Remote control

DVD INPUT

Infrared signal

receiver

Infrared emitter

Main room

Second room

REMOTE CONTROL OUT

ZONE

REMOTE IN

Notes

•

When not using the main room, turn down the volume of this unit in the main room. Adjust the volume control on the amplifier in the

second room.

•

To avoid unexpected noise, DO NOT USE the Zone feature with CDs encoded in DTS.

om Www.Somanuals.com. All Manuals Search And

ZONE

(RX-V757 ONLY)

Using this unit’s internal amplifier

To use this unit’s internal amplifier, set “ZONE2 AMP” to “INT” in SET MENU (see page 65).

–

PRESENCE

/ZONE

Second room

This unit

Press LEARN to complete the Zone setup.

The remote control will be able to operate this unit

and Zone 2.

Remote controlling Zone 2

The supplied remote control can be used to control Zone

2. You can even select the input source and control

components located in the main room directly from the

second room regardless of the listening condition in the

main room.

LEARN

■

To control Zone 2

You can also turn on/off the MAIN and Zone

mode by pressing

MAIN or ZONE

on the front panel.

Press SELECT

“ZONE2” in the display window.

repeatedly to display

■

To enable Zone 2 mode on the remote

control

You will be able to switch the remote control mode from

one room to another, and use STANDBY, SYSTEM

POWER, MUTE and VOL –/+ to control the selected

room.

SELECT

Repeat steps 1 and 2 of the procedure in

“Setting remote control codes” on page 69.

Press

to select “L:AMP”.

PRESET

TV VOL

Press SYSTEM POWER to turn Zone 2 power

on.

TV MUTE

ENTER

TV VOL

PRESET

Press

to select “ID1Z”.

PRESET

TV VOL

TV MUTE

ENTER

TV VOL

PRESET

Notes

•

To select the Zone feature with ID2, select “ID2Z”.

Since the Zone code is common to “ID1Z” and “ID2Z”, the

Zone code does not change even if the AMP library code

(remote control setting) is switched.

om Www.Somanuals.com. All Manuals Search And

ZONE

(RX-V757 ONLY)

■

Turning this unit to either on or standby

Press an input selector button to select the

input source you want to listen to in the

second room.

The display window shows “2: name of selected

input” if the remote control is in the Zone 2 mode.

SYSTEM POWER and STANDBY work differently

depending on the selected mode that appears on the

display window.

•

When normal, Zone 2 mode is selected, you can turn

the main unit, Zone 2 to on/standby individually.

When system mode is selected, or when ID1/ID2 is

selected as the amplifier library (L:AMP) code, you

can turn the main unit, Zone 2 to on/standby all

together simultaneously.

•

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

V-AUX

DTV/CBL

TUNER

VCR

DVD

LCD display

SYSTEM POWER/

STANDBY

Normal mode^*

Zone mode

System mode

Name of component

Turns the main unit

on/standby

You can control Zone 2 using the input

selector, STANDBY, SYSTEM POWER, MUTE

and VOL –/+.

“ZONE2” or “2:name

of component”

Turns Zone to on/

standby

“SYSTM”

Turns everything (the

main unit and Zone

2) on/standby

REC

TRANSMIT

RE-NAME

CLEAR

LEARN

AUDIO

DISC SKIP

SYSTEM

POWER

STANDBY

SLEEP

INPUT MODE

VOL

FREQ/TEXT

EON

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

“MAIN” appears for few seconds when SYSTEM POWER

or STANDBY is pressed.

MODE

START

PTY SEEK

PRESET

LEVEL

SET MENU

MUTE

-AUX

TUNER

TITLE

TV VOL

TV INPUT

SRCH MODE

DTV/CBL

VCR

DVD

A/B/C/D/E

■

Special considerations for DTS software

TV MUTE

ENTER

The DTS signal is a digital bitstream. If you attempt to

send the DTS signal to the second room you will only hear

digital noise (that may damage your speakers). Thus, the

following considerations and adjustments need to be made

when playing DTS-encoded discs.

TV VOL

PRESET

RETURN

DISPLAY

MEMORY

EFFECT

If “ZONE2 AMP” in OPTION MENU is set to INT, you

can use VOL –/+ to adjust sound output from speakers

connected to the PRESENCE/ZONE

speaker terminals

(see page 65). However, VOL –/+ cannot be used to

adjust sound output from the ZONE2 OUTPUT jacks.

For DVDs encoded in DTS

Only 2 channel analog audio signals may be sent to the

second room.

Use the disc menu to set the DVD player’s mixed

2-channel left and right audio outputs to the PCM or

Dolby Digital soundtrack.

Press SELECT k /n to exit from the Zone 2

mode.

Notes

For CDs encoded in DTS

•

“ZONE2” will appear in the display window only when

pressed, and SYSTM only when is pressed.

If you press SELECT k when the unit is set to Zone 2 mode, the

unit switches to Zone mode. However, this unit does not

support Zone mode. To exit Zone mode, press SELECT n .

Since the Zone code is common to “ID1Z” and “ID2Z”, the

Zone code does not change even if the AMP library code

(remote control setting) is switched.

To avoid unexpected noise, DO NOT USE the Zone 2

feature with CDs encoded in DTS.

•

om Www.Somanuals.com. All Manuals Search And

EDITING SOUND FIELD PARAMETERS

What is a sound field

Changing parameter settings

What really creates the rich, full tones of a live instrument

are the multiple reflections from the walls of the room. In

addition to making the sound “live”, these reflections

enable us to tell where the player is situated, and the size

and shape of the room in which we are sitting.

You can enjoy good quality sound with the factory preset

parameters. Although you do not have to change the initial

settings, you can change some of the parameters to better

suit the input source or your listening room.

REC

TRANSMIT

RE-NAME

CLEAR

LEARN

AUDIO

■

Elements of a sound field

SYSTEM

POWER

DISC SKIP

STANDBY

SLEEP

INPUT MODE

VOL

In any environment, in addition to the direct sound coming

straight to our ears from the player’s instrument, there are

two distinct types of sound reflections that combine to

make up the sound field:

FREQ/TEXT

EON

PHONO

MD/CD-R

DVR/VCR2

MULTI CH IN

MODE

START

PTY SEEK

PRESET

-AUX

TUNER

LEVEL

SET MENU

MUTE

TITLE

TV INPUT

SRCH MODE

DTV/CBL

VCR

DVD

A/B/C/D/E

TV MUTE

ENTER

ON SCREEN STRAIGHT

DISPLA

SELECT

TV VOL

PRESET

RETURN

MEMORY

EFFECT

Early reflections

STEREO

MUSIC ENTERTAIN MOVIE

POWER

AMP

STANDARD SELECT EXTD SUR. PURE DIRECT

Reflected sounds reach our ears extremely rapidly (50 ms

– 100 ms after the direct sound), after reflecting from one

surface only – for example, from the ceiling or a wall.

Early reflections actually add clarity to the direct sound.

REC

SPEAKERS

NIGHT

ENT

CHP/INDEX

Reverberations

Press AMP.

AMP

These are caused by reflections from more than one

surface – walls, ceiling, the back of the room – so

numerous that they merge together to form a continuous

sonic “afterglow”. They are non-directional, and lessen

the clarity of the direct sound.

Turn on the video monitor and

press ON SCREEN repeatedly

to select the full display

mode.

ON SCREEN

DISPLAY

Direct sound, early reflections and subsequent

reverberation taken together help us to determine the

subjective size and shape of the room, and it is this

information that the digital sound field processor

reproduces in order to create sound fields.

Select the sound field program you want to

adjust.

If you could create the appropriate early reflections and

subsequent reverberations in your listening room, you

would be able to create your own listening environment.

The acoustics in your room could be changed to those of a

concert hall, a dance floor, or virtually any size room at

all. This ability to create sound fields at will is exactly

what YAMAHA has done with the digital sound field

processor.

STEREO

MUSIC ENTERTAIN MOVIE

STANDARD SELECT EXTD SUR. PURE DIRECT

SPEAKERS

NIGHT

ENT.

CHP/INDEX

Program No.

Program name

P04 MOVIE THEATER

.ꢀꢀꢀꢀꢀGeneral

Cursor

ꢀꢀDSPꢀLEVEL;;;;0dB

ꢀꢀP.INIT.DLY;;15ms

ꢀꢀP.ROOMꢀSIZE;;1.0

ꢀꢀS.INIT.DLY;;20ms

ꢀꢀS.ROOMꢀSIZE;;1.0

Parameters

Parameter values

om Www.Somanuals.com. All Manuals Search And

EDITING SOUND FIELD PARAMETERS

■

Resetting parameters to the factory

presets

Press

the parameters.

to select

PRESET

TV VOL

To reset all parameters

Use PARAM. INI (see page 65).

TV MUTE

ENTER

TV VOL

PRESET

Press

to change

PRESET

TV VOL

the parameter value.

When you set a parameter

to a value other than the

factory-set value, an

TV MUTE

ENTER

asterisk mark (*) appears

by the parameter name on

the on-screen display.

TV VOL

PRESET

If you press and hold </> to change the parameter value, the

front panel display automatically stops at the factory preset

parameter momently.

Repeat steps 3 through 5 as necessary to

change other program parameters.

Note

You cannot change parameter values when “MEMORY GUARD”

is set to ON. If you want to change the parameter values, set

“MEMORY GUARD” to OFF (see page 64).

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is set in the standby

mode, the power cord is disconnected from the AC

outlet, or the power supply is temporarily cut due to

power failure. However, if the power is cut for more

than one week, the parameter values will return to the

factory settings. If this happens, edit the parameter

value again.

om Www.Somanuals.com. All Manuals Search And

SOUND FIELD PARAMETER DESCRIPTIONS

You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your

listening room. Not all of the following parameters are found in every program.

■

DSP LEVEL (DSP level)

Function:

Description:

Adjusts the level of all the DSP effect sounds within a narrow range.

Depending on the acoustics of your listening room, you may want to increase or decrease the DSP

effect level relative to the level of the direct sound.

Control range: –6 dB to +3 dB

■

INIT. DLY/P. INIT. DLY (Initial delay)

Function:

Changes the apparent distance from the source sound by adjusting the delay between the direct sound

and the first reflection heard by the listener.

Description:

Control range:

The smaller the value, the closer the sound source seems to the listener. The larger the value, the farther

it seems. For a small room, set to a small value. For a large room, set to a large value.

to 99 msec

Source Sound

Early

Reflections

Time

Delay

Sound Source

Reflection Face

Small value

Large value

99 ms

■

ROOM SIZE/P. ROOM SIZE (Room size)

Function:

Adjusts the apparent size of the surround sound field. The larger the value, the larger the surround

sound field becomes.

Description:

As the sound is repeatedly reflected around a room, the larger the hall is, the longer the time between

the original reflected sound and the subsequent reflections. By controlling the time between the

reflected sounds, you can change the apparent size of the virtual venue. Changing this parameter from

one to two, doubles the apparent length of the room.

Control range: 0.1 to 2.0

Source Sound

Early

Reflections

Time

Sound Source

Large value

2.0

Small value

0.1

om Www.Somanuals.com. All Manuals Search And

SOUND FIELD PARAMETER DESCRIPTIONS

■

LIVENESS (Liveness)

Function: Adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections

decay.

Description:

The early reflections of a sound source decay much faster in a room with acoustically absorbent wall

surfaces than in one which has highly reflective surfaces. A room with acoustically absorbent surfaces

is referred to as “dead”, while a room with highly reflective surfaces is referred to as “live”. The

LIVENESS parameter lets you adjust the early reflection decay rate, and thus the “liveness” of the

room.

Control range:

to 10

Source Sound

Live

Dead

Time

Small Reflected

Sound

Large

Reflected Sound

Small value

Large value

■

S. INIT. DLY (Surround initial delay)

Function:

Adjusts the delay between the direct sound and the first reflection on the surround side of the sound

field. You can only adjust this parameter when at least two front channels and two surround channels

are used.

Control Range:

to 49 msec

■

S. ROOM SIZE (Surround room size)

Function: Adjusts the apparent size of the surround sound field.

Control Range: 0.1 to 2.0

■

S. LIVENESS (Surround liveness)

Function:

Adjusts the apparent reflectivity of the virtual walls in the surround sound field.

Control Range:

0 to 10

■

SB INI. DLY (Surround back initial delay)

Function:

Adjusts the delay between the direct sound and the first reflection in the surround back sound field.

Control Range:

1 to 49 msec

■

SB ROOM SIZE (Surround back room size)

Function: Adjusts the apparent size of the surround back sound field.

Control Range: 0.1 to 2.0

■

SB LIVENESS (Surround back liveness)

Function:

Adjusts the apparent reflectivity of the virtual wall in the surround back sound field.

Control Range:

to 10

om Www.Somanuals.com. All Manuals Search And

SOUND FIELD PARAMETER DESCRIPTIONS

■

REV.TIME (Reverberation time)

Function:

Adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at

1 kHz). This changes the apparent size of the acoustic environment over an extremely wide range.

Set a longer reverberation time for “dead” sources and listening room environments, and a shorter time

for “live” sources and listening room environments.

Description:

Control Range: 1.0 to 5.0 sec

Reverberation

Source Sound

Reverberation

Early Reflections

60 dB

Reverberation time

Long

Reverberation

Sound Source

Short

Reverberation

Small value

1.0

Large value

5.0

■

REV.DELAY (Reverberation delay)

Function:

Adjusts the time difference between the beginning of the direct sound and the beginning of the

reverberation sound.

Description:

The larger the value, the later the reverberation sound begins. A later reverberation sound makes you

feel like you are in a larger acoustic environment.

Control Range: 0 to 250 msec

Source Sound

(dB)

60 dB

Reverberation

Time

Reverberation

delay

Reverberation time

■

REV. LEVEL (Reverberation level)

Function:

Adjusts the volume of the reverberation sound.

Description:

The larger the value, the stronger the reverberation becomes.

Control Range: 0 to 100%

Source Sound

Reverberation level

Time

om Www.Somanuals.com. All Manuals Search And

SOUND FIELD PARAMETER DESCRIPTIONS

DIALG.LIFT (Dialog lift)

■

Function:

Adjusts the height of the front and center channel sounds by assigning some of the front and center

channel elements to the presence speakers.

Description:

Choices:

The larger the parameter, the higher the position of the front and center channel sound.

0/1/2/3/4/5, initial setting is 0.

For 2ch Stereo:

DIRECT (Direct)

■

Function:

Choices:

Notes

Bypasses this unit’s decoders and DSP processors for pure high fidelity sound when playing 2-channel

analog sources.

AUTO, OFF

•

When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to

right speakers.

When “BASS OUT” is set to BOTH, or “FRONT SP” set to SMALL and “BASS OUT” set to SWFR, front left and right speaker low-

frequency signals are redirected to the subwoofer.

channels and output from the front left and

For 7ch Stereo:

Function:

These parameters adjust the volume level for each channel in 7-channel stereo mode.

Control Range: 0 – 100%

■

CT LEVEL (Center level)

SL LEVEL (Surround left level)

SR LEVEL (Surround right level)

SB LEVEL (Surround back level)

PL LEVEL (Presence left level)

PR LEVEL (Presence level)

For PRO LOGIC IIx Music and PRO LOGIC II Music:

PANORAMA (Panorama)

■

Function:

Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect.

Choices:

OFF, ON

■

DIMENSION (Dimension)

Function:

Gradually adjusts the sound field either towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).

■

CENTER WIDTH (Center width)

Function:

Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the

center image towards the front left and right speakers.

Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only

from front left and right speakers)

Initial setting:

Note

This parameter can be set only when SUR.STANDARD is selected.

om Www.Somanuals.com. All Manuals Search And

SOUND FIELD PARAMETER DESCRIPTIONS

For DTS Neo:6 Music:

C. IMAGE (Center image)

■

Function: Adjusts the center image from all three front speakers to varying degrees.

Control range: 0 to 1.0

Initial setting: 0.3

Note

This parameter can be set only when SUR.STANDARD is selected.

om Www.Somanuals.com. All Manuals Search And

TROUBLESHOOTING

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below

or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the

nearest authorized YAMAHA dealer or service center.

■

General

Refer to

page

Problem

Cause

Remedy

This unit fails to turn

on when STANDBY/

ON (or SYSTEM

POWER) is pressed,

or enters the standby

mode soon after the

power has been

The power cord is not connected or the

plug is not completely inserted.

Connect the power cord firmly.

—

The impedance setting is incorrect.

Set the impedance to match your speakers.

The protection circuitry has been

activated.

Make sure all speaker wire connections on this unit

and on all speakers are secure and that the wire for

each connection does not touch anything other than

its respective connection.

11-14

turned on.

This unit has been exposed to

external electric shock (such as lightning

or strong static electricity).

strong

Set this unit in the standby mode, disconnect the

power cord, plug it back in after 30 seconds, then use

it normally.

—

On-screen display

does not appear.

The setting for the on-screen display is set Select the full display or short display mode.

to “DISPLAY OFF”.

“GRAY BACK” in SET MENU is set to

OFF, and no video signal is currently

being received.

Set “GRAY BACK” to AUTO to always show the

OSD.

No sound

Incorrect input or output cable

connections.

Connect the cables properly. If the problem persists,

the cables may be defective.

15-20

The optimizer microphone is connected.

Disconnect the optimizer microphone.

Select AUTO.

The input mode is set to DTS or

ANALOG.

No appropriate input source has been

selected.

Select an appropriate input source with INPUT,

MULTI CH INPUT (or MULTI CH IN on the remote

control) or the input selector buttons.

Speaker connections are not secure.

Secure the connections.

The front speakers to be used have not

been selected properly.

Select the front speakers with SPEAKERS

and/or

The volume is turned down.

The sound is muted.

Turn up the volume.

—

Press MUTE or any operation button of this unit to

resume audio output, then adjust the volume.

The input mode is set to ANALOG while

Set the input mode to AUTO or DTS.

—

playing

signal.

source encoded with DTS

Signals this unit cannot reproduce are

being received from source component,

such as CD-ROM.

Play a source whose signals can be reproduced by this

unit.

No picture

The output and input for the picture are

connected to different types of video

jacks.

Turn on the video conversion function.

om Www.Somanuals.com. All Manuals Search And

TROUBLESHOOTING

Referto

page

Problem

Cause

Remedy

The sound suddenly

goes off.

The protection circuitry has been activated Check that the impedance selector setting is correct.

—

because of short circuit, etc.

Check that the speaker wires are not touching each

other and then turn this unit back on.

The sleep timer has turned the unit off.

The sound is muted.

Turn on the power, and play the source again.

—

Press MUTE to cancel mute.

Only the speaker on

one side can be

heard.

Incorrect cable connections.

Connect the cables properly. If the problem persists,

the cables may be defective.

Incorrect balance settings in SET MENU. Adjust the SPEAKER LEVEL settings.

Only the center

speaker outputs

substantial sound.

When playing monaural source with

CINEMA DSP program, the source signal

is directed to the center channel, and the

front and surround speakers output effect

sounds.

No sound from the

effect speakers.

The sound field programs are turned off.

Press STRAIGHT (EFFECT) to turn them on.

Try another sound field program.

You are using source or program

combination that does not output sound

from all channels.

No sound from the

center speaker.

The output level of the center speaker is

set to minimum.

Raise the level of the center speaker.

—

“CENTER SP” in SET MENU is set to

NONE.

Select the appropriate setting for the center speaker.

One of the HiFi DSP programs (except for Try another sound field program.

7ch Stereo) has been selected.

No sound from the

surround speakers.

The output level of the surround speakers

is set to minimum.

Raise the output level of the surround speakers.

“SUR. L/R SP” in SET MENU is set to

NONE.

Select the appropriate setting for the surround left and

right speakers.

monaural source is being played with

Press STRAIGHT (EFFECT) to turn on the sound

fields.

STRAIGHT.

No sound from the

surround back

speakers.

Presence speakers are selected.

Select surround back speakers in SUR.

L/R SP.

“SUR. L/R SP” in SET MENU is set to

NONE.

If the surround left and right speakers are set to

NONE, the surround back speaker setting is

automatically set to NONE. Select the appropriate

setting for the surround speakers.

“SUR.

NONE.

L/R SP” in SET MENU is set to Select LRGx1 or SMLx1.

No sound from the

subwoofer.

“LFE/BASS OUT” in SET MENU is set

to FRNT when Dolby Digital or DTS

signal is being played.

Select SWFR or BOTH.

Select BOTH.

“LFE/BASS OUT” in SET MENU is set

to SWFR or FRNT when 2-channel

source is being played.

The source does not contain low bass

signals.

om Www.Somanuals.com. All Manuals Search And

TROUBLESHOOTING

Referto

page

Problem

Cause

Remedy

Dolby Digital or DTS

sources cannot be

played. (Dolby Digital

or DTS indicator on

the front panel

The connected component is not set to

output Dolby Digital or DTS digital

signals.

Make an appropriate setting following the operating

instructions for your component.

—

The input mode is set to ANALOG.

Set the input mode to AUTO or DTS.

display does not light

up.)

“humming” sound

Incorrect cable connections.

Firmly connect the audio plugs. If the problem

persists, the cables may be defective.

—

can be heard.

No connection from the turntable to the

GND terminal.

Connect the grounding cord of your turnable to the

GND terminal of this unit.

The volume level is

low while playing

record.

The record is being played on

with an MC cartridge.

turntable

The turntable should be connected to this unit through

an MC-head amplifier.

The volume level

The component connected to the OUT

(REC) jacks of this unit is turned off.

Turn on the power to the component.

—

cannot be increased,

or the sound is

distorted.

The sound effect

It is not possible to record the sound effect

cannot be recorded.

with

recording component.

source cannot be

The source component is not connected to Connect the source component to the DIGITAL

15-19

recorded by digital

this unit’s DIGITAL INPUT jacks.

INPUT jacks.

recording component

connected to this

DIGITAL OUTPUT

jack.

Some components cannot record the

Dolby Digital or DTS sources.

source cannot be

The source component is not connected to Connect the source component to the analog AUDIO

15-19

recorded by an

this unit’s analog AUDIO IN jacks.

IN jacks.

analog component

connected to the

AUDIO OUT jacks.

The sound field

“MEMORY GUARD” in SET MENU is

Select OFF.

parameters and some set to ON.

other settings on this

unit cannot be

changed.

This unit does not

operate properly.

The internal microcomputer has been

frozen by an external electric shock (such

as lightning or excessive static electricity)

Disconnect the AC power cord from the outlet and

then plug it in again after about 30 seconds.

—

or by

power supply with low voltage.

“CHECK SP WIRES”

appears in the front

panel display.

Speaker cables are short circuited.

Make sure all speaker cables are connected correctly.

om Www.Somanuals.com. All Manuals Search And

TROUBLESHOOTING

Referto

page

Problem

Cause

Remedy

There is noise

This unit is too close to the digital or high- Move this unit further away from such equipment.

frequency equipment.

—

interference from

digital or radio

frequency equipment,

or this unit.

The picture is

disturbed.

The video source uses scrambled or

encoded signals to prevent dubbing.

There is noise when

the OSD is displayed.

The OSD may be disturbed when

displaying OSD through component video

connections.

Select OFF in CMPNT OSD.

—

This unit suddenly

The internal temperature becomes too

Wait about hour for this unit to cool down and then

turns into the standby high and the overheat protection circuitry

mode. has been activated.

turn it back on.

■

Tuner (With the exception of U.K. model)

Refer

to page

Problem

Cause

Remedy

Check the antenna connections.

FM stereo reception is

noisy.

The characteristics of FM stereo

broadcasts may cause this problem

when the transmitter is too far away or

the antenna input is poor.

Try using high-quality directional FM

antenna.

Use the manual tuning method.

—

There is distortion, and

clear reception cannot

There is multipath interference.

Adjust the antenna position to eliminate

multipath interference.

be obtained even with

FM good FM antenna.

The desired station

The signal is too weak.

Use

high-quality directional FM antenna.

cannot be tuned in with

the automatic tuning

method.

Use the manual tuning method.

Previously preset

stations can no longer

be tuned in.

This unit has been disconnected for

long period.

Preset the stations again.

—

The desired station

cannot be tuned in with

the automatic tuning

method.

The signal is weak or the antenna

connections are loose.

Tighten the AM loop antenna connections

and orient it for the best reception.

Use the manual tuning method.

—

There are continuous

crackling and hissing

noises.

Noises result from lightning,

fluorescent lamps, motors, thermostats

and other electrical equipment.

Use an outdoor antenna and ground wire.

This will help somewhat, but it is difficult to

eliminate all noise.

There are buzzing and

whining noises.

TV set is being used nearby.

Move this unit away from the TV.

—

om Www.Somanuals.com. All Manuals Search And

TROUBLESHOOTING

■

Remote control

Problem

Referto

page

Cause

Remedy

The remote control

does not work nor

function properly.

Wrong distance or angle.

The remote control will function within

maximum

range of

and no more than 30 degrees off-axis

from the front panel.

Direct sunlight or lighting (from an

inverter type of fluorescent lamp, etc.) is

striking the remote control sensor of this

unit.

Reposition this unit.

—

The batteries are weak.

Replace all batteries.

The remote control code was not correctly Set the remote control code correctly.

set.

Try setting another code for the same manufacturer.

The remote control ID and this unit’s ID

do not match.

Switch the library code.

67, 69

Even if the remote control code is

correctly set, there are some models that

do not respond to the remote control.

Program the necessary functions independently into

the programmable buttons using the Learn feature.

The remote control

does not “learn” new

functions.

The batteries of this remote control and/or Replace the batteries.

the other remote control are too weak.

The distance between the two remote

controls is too much or too little.

Place the remote controls at the proper distance.

—

The signal coding or modulation of the

other remote control is not compatible

with this remote control.

Learning is not possible.

Memory capacity is full.

Delete other unnecessary functions to make room for

the new functions.

om Www.Somanuals.com. All Manuals Search And

RESETTING THE FACTORY PRESETS

If you want to reset all of your unit’s parameters for any

reason, do the following. This procedure completely resets

ALL parameters, including the SET MENU, level, assign

and tuner presets.

Press STANDBY/ON to confirm your

selection.

Be sure this unit is in standby mode.

STANDBY

/ON

VOLUME

If you selected “RESET”, the unit is reset to its

factory presets and switches to standby mode.

If you selected “CANCEL”, the unit switches to

standby mode and nothing is reset.

OPTIMIZER MIC

PRESET/TUNING

FM/AM

XIM

A/B/C/D/E

PRESET/TUNING

MEMOR

TUNING MODE

SEAR

ITMODE

LEVEL

DISPLAY

AUTO/MAN'L MONO

PROGRAM

INPUT

PHONES

SPEAKERS

STRAIGHT

EFFECT

TONE CONTROL

MULTI CH

INPUT

PURE DIRECT

VIDEO

UDIO

STANDBY

/ON

VIDEO

OPTICAL

SILENT CINEMA

1,4

1,3

With the unit in the standby mode, hold down

STRAIGHT (EFFECT) on the front panel and

press STANDBY/ON.

The ADVANCED SETUP menu appears in the front

panel display.

STRAIGHT

While holding

STANDBY

/ON

down, press

EFFECT

To cancel the initialization procedure without making any

changes, press STANDBY/ON.

Rotate PROGRAM to move through the menu

and select “PRESET”.

PROGRAM

Press STRAIGHT (EFFECT) to select the

desired setting.

STRAIGHT

EFFECT

RESET

CANCEL

To reset the unit to its factory presets.

To cancel without making any changes.

om Www.Somanuals.com. All Manuals Search And

GLOSSARY

■

Dolby Surround

Audio formats

Dolby Surround uses a 4 channel analog recording system

to reproduce realistic and dynamic sound effects: 2 front

left and right channels (stereo), a center channel for dialog

(monaural), and a surround channel for special sound

effects (monaural). The surround channel reproduces

sound within a narrow frequency range.

Dolby Surround is widely used with nearly all video tapes

and laser discs, and in many TV and cable broadcasts as

well. The Dolby Pro Logic decoder built into this unit

employs a digital signal processing system that

automatically stabilizes the volume on each channel to

enhance moving sound effects and directionality.

■

Dolby Digital

Dolby Digital is a digital surround sound system that gives

you completely independent multi-channel audio. With 3

front channels (left, center, and right), and 2 surround

stereo channels, Dolby Digital provides 5 full-range audio

channels. With an additional channel especially for bass

effects, called LFE (low frequency effect), the system has

a total of 5.1-channels (LFE is counted as 0.1 channel). By

using 2-channel stereo for the surround speakers, more

accurate moving sound effects and surround sound

environment are possible than with Dolby Surround. The

wide dynamic range (from maximum to minimum

volume) reproduced by the 5 full-range channels and the

precise sound orientation generated using digital sound

processing provide listeners with previously unheard of

excitement and realism.

■

DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality

for multi-channel sound on DVD-Video, and is fully

backward-compatible with all DTS decoders. “96” refers

to a 96 kHz sampling rate (compared to the typical 48 kHz

sampling rate). “24” refers to 24-bit word length. DTS 96/

24 offers sound quality transparent to the original 96/24

master, and 96/24 5.1-channel sound with full-quality full-

motion video for music programs and motion picture

soundtracks on DVD-video.

With this unit, any sound environment from monaural up

to a 5.1-channel configuration can be freely selected for

your enjoyment.

■

Dolby Digital EX

Dolby Digital EX creates 6 full-bandwidth output

channels from 5.1-channel sources. This is done using a

matrix decoder that derives 3 surround channels from the

2 in the original recording. For the best results, Dolby

Digital EX should be used with movie sound tracks

recorded with Dolby Digital Surround EX. With this

additional channel, you can experience more dynamic and

realistic moving sound especially with scenes with

“flyover” and “fly-around” effects.

■

DTS (Digital Theater Systems)

Digital Surround

DTS digital surround was developed to replace the analog

soundtracks of movies with a 6-channel digital sound

track, and is now rapidly gaining popularity in movie

theaters around the world. Digital Theater Systems Inc.

has developed a home theater system so that you can enjoy

the depth of sound and natural spatial representation of

DTS digital surround in your home. This system produces

practically distortion-free 6-channel sound (technically, a

left, right and center channels, 2 surround channels, plus

an LFE 0.1 channel as a subwoofer, for a total of 5.1-

channels). The unit incorporates DTS-ES decoder that

enables 6.1-channel reproduction by adding the surround

back channel to existing 5.1-channel format.

■

Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to

decode vast numbers of existing Dolby Surround software.

This new technology enables a discrete 5-channel

playback with 2 front left and right channels, 1 center

channel, and 2 surround left and right channels (instead of

only 1 surround channel for conventional Pro Logic

technology). Music and Game modes are also available for

2-channel sources in addition to the Movie mode.

■

Neo:6

Neo:6 decodes the conventional 2-channel sources for 6

channel playback by the specific decoder. It enables

playback with the full-range channels with higher

separation just like digital discrete signal playback. Two

modes are available: “Music mode” for playing music

sources and “Cinema mode” for movies.

■

Dolby Pro Logic IIx

Dolby Pro Logic IIx is a new technology enabling discrete

multi-channel playback from 2-channel or multi-channel

sources. There is a Music mode for music, a Movie mode

for movies and a Game mode for games.

om Www.Somanuals.com. All Manuals Search And

GLOSSARY

Sound field programs

Audio information

■

CINEMA DSP

■

ITU-R

Since the Dolby Surround and DTS systems were

originally designed for use in movie theaters, their effect

is best felt in a theater having many speakers and designed

for acoustic effects. Since home conditions, such as room

size, wall material, number of speakers, and so on, can

differ so widely, it’s inevitable that there are differences in

the sound heard as well. Based on a wealth of actually

measured data, YAMAHA CINEMA DSP uses

YAMAHA original sound field technology to combine

Dolby Pro Logic, Dolby Digital and DTS systems to

provide the visual and audio experience of movie theater

in the listening room of your own home.

ITU-R is the radio communication sector of the ITU

(International Telecommunication Union). ITU-R

recommends a standard speaker placement which is used

in many critical listening rooms, especially for mastering

purposes.

■

LFE 0.1 channel

This channel is for the reproduction of low bass signals.

The frequency range for this channel is 20 Hz to 120 Hz.

This channel is counted as 0.1 because it only enforces a

low frequency range compared to the full-range

reproduced by the other 5/6 channels in Dolby Digital or

DTS 5.1/6.1-channel systems.

■

SILENT CINEMA

■

PCM (Linear PCM)

YAMAHA has developed a natural, realistic sound effect

Linear PCM is a signal format under which an analog

audio signal is digitized, recorded and transmitted without

using any compression. This is used as a method of

recording CDs and DVD audio. The PCM system uses a

technique for sampling the size of the analog signal per

very small unit of time. Standing for “pulse code

modulation”, the analog signal is encoded as pulses and

then modulated for recording.

DSP algorithm for headphones.

Parameters for headphones have been set for each sound

field so that accurate representations of all the sound field

programs can be enjoyed on headphones.

■

Virtual CINEMA DSP

YAMAHA has developed a Virtual CINEMA DSP

algorithm that allows you to enjoy DSP sound field

surround effects even without any surround speakers by

using virtual surround speakers.

It is even possible to enjoy Virtual CINEMA DSP using a

minimal two-speaker system that does not include a center

speaker.

■

Sampling frequency and number of

quantized bits

When digitizing an analog audio signal, the number of

times the signal is sampled per second is called the

sampling frequency, while the degree of fineness when

converting the sound level into a numeric value is called

the number of quantized bits.

The range of rates that can be played back is determined

based on the sampling rate, while the dynamic range

representing the sound level difference is determined by

the number of quantized bits. In principle, the higher the

sampling frequency, the wider the range of frequencies

that can be played back, and the higher the number of

quantized bits, the more finely the sound level can be

reproduced.

om Www.Somanuals.com. All Manuals Search And

GLOSSARY

Video signal information

■

Component video signal

With the component video signal system, the video signal

is separated into the Y signal for the luminance and the P^B

and P^Rsignals for the chrominance. Color can be

reproduced more faithfully with this system because each

of these signals is independent. The component signal is

also called the “color difference signal” because the

luminance signal is subtracted from the color signal.

A monitor with component input jacks is required in order

to use the component signal for output.

■

Composite video signal

With the composite video signal system, the video signal

is composed of three basic elements of a video picture;

color, brightness and synchronization data. A composite

video jack on a video component transmits these three

elements combined.

■

S-video signal

With the S-video signal system, the video signal normally

transmitted using a pin cable is separated and transmitted

as the Y signal for the luminance and the C signal for the

chrominance through the S-video cable. Using the

S VIDEO jack eliminates video signal transmission loss

and allows recording and playback of even more beautiful

images.

om Www.Somanuals.com. All Manuals Search And

SPECIFICATIONS

AUDIO SECTION

VIDEO SECTION

•

Minimum RMS Output Power for Front, Center, Surround,

•

Video Signal Type ........................................................ PAL/NTSC

Signal to Noise Ratio .............................................. 50 dB or more

Frequency Response (MONITOR OUT)

Surround back

20 Hz to 20 kHz, 0.06% THD,

Maximum Power (EIAJ)

!% ................................... 100

•

Composite, S-video ................................

Component .............................................

Hz to 10 MHz, –3 dB

Hz to 60 MHz, –3 dB

[China, Korea and General models]

kHz, 10% THD, !%....................................................... 140

•

Dynamic Power (IHF)

8/6/4/2 ....................................................... 135/170/200/245

FM SECTION*

•

Tuning Range

[U.S.A. and Canada models] ......................... 87.5 to 107.9 MHz

[General model] ...................... 87.5/87.50 to 108.0/108.00 MHz

[Other models] .......................................... 87.50 to 108.00 MHz

DIN Standard Output Power [U.K. and Europe models]

kHz, 0.7% THD, !%...................................................... 150

IEC Output Power [U.K. and Europe models]

kHz, 0.06% THD, !%.................................................... 110

•

Usable Sensitivity (IHF)...................................... 1.0 µV (11.2 dBf)

Signal to Noise Ratio (IHF)

Damping Factor (IHF)

20 Hz to 20 kHz, !%.................................................120 or more

Mono/Stereo ............................................................ 76 dB/70 dB

•

Harmonic Distortion (1 kHz)

Frequency Response

CD terminal to Front L/R .................... 10 Hz to 100 kHz, –3 dB

Mono/Stereo ............................................................... 0.2%/0.3%

•

Stereo Separation (1 kHz) ..................................................... 42 dB

Frequency Response ........................ 20 Hz to 15 kHz, +0.5, –2 dB

Total Harmonic Distortion

PHONO to REC OUT (20 Hz to 20 kHz, V) ..... 0.02% or less

CD, etc. to Front L/R

(20 Hz to 20 kHz, 50 W,

!)%............................ 0.06% or less

AM SECTION*

•

Tuning Range

•

Signal to Noise Ratio (IHF-A Network)

[U.S.A. and Canada models] ............................. 530 to 1710 kHz

[General model] ................................ 530/531 to 1710/1611 kHz

[Other models] .................................................. 531 to 1611 kHz

Phono (5 mV) to REC OUT

[U.K., Europe and Australia models] ....................81 dB or more

[Other models] .......................................................86 dB or more

CD (250 mV) to Front L/R, Effect Off ................100 dB or more

•

Usable Sensitivity ............................................................ 300 µV/m

•

Residual Noise (IHF-A Network)

Front L/R .............................................................. 150 µV or less

GENERAL

•

Power Supply

Channel Separation (1 kHz/10 kHz)

PHONO (shorted) to Front L/R ................. 60 dB/55 dB or more

CD (5.1 k! terminated) to Front L/R ........ 60 dB/45 dB or more

[U.S.A. and Canada models] ............................ AC 120 V, 60 Hz

[Australia model] ............................................. AC 240 V, 50 Hz

[China model] ................................................... AC 220 V, 50 Hz

[Korea model] .................................................. AC 220 V, 60 Hz

[U.K. and Europe models] ............................... AC 230 V, 50 Hz

[General model] ............. AC 110/120/220/230–240 V, 50/60 Hz

•

Tone Control (Front L/R)

BASS Boost/Cut ..................................................... ±6 dB/50 Hz

BASS Turnover Frequency ............................................... 350 Hz

TREBLE Boost/Cut .............................................. ±6 dB/20 kHz

TREBLE Turnover Frequency ......................................... 3.5 kHz

•

Power Consumption

[U.S.A. and Canada models] ................................ 400 W/500 VA

[Other models] .................................................................. 440

•

Phones Output ......................................................... 150 mV/100

Input Sensitivity/Input Impedance

•

Standby Power Consumption ..................................... 0.1

AC Outlets

or less

PHONO ................................................................. 2.5 mV/47 k!

CD, etc. ................................................................ 200 mV/47 k!

MULTI CH INPUT .............................................. 200 mV/47 k!

[U.K. and Australia models] .............

[U.S.A., Canada and China models] ...2 (Total 100

[Europe and General models]................2 (Total 50

(Total 100

maximum)

•

Output Level/Output Impedance

REC OUT ........................................................... 200 mV/1.2 k!

PRE OUT .................................................................... 2 V/1.2 k!

V/1.7 k!

•

Dimensions (W

D) ................................ 435

171 420 mm

SUBWOOFER ...........................................................

ZONE OUTPUT

[U.S.A., Canada, Australia and

Europe models] ................................................... 200 mV/1.2 k!

Weight ................................................................................. 12.5 kg

*Except DSP-AX757SE

om Www.Somanuals.com. All Manuals Search And

Weider Home Gym WEBE09310 User Manual
Westinghouse Computer Monitor LCM 19v5 User Manual
Whirlpool Oven RM288PW User Manual
Whirlpool Range 9763069 User Manual
Woods Equipment Tiller TC60 User Manual
Xantech Universal Remote 48195D User Manual
Xerox Printer 180MX User Manual
Xpelair DVR GX6 User Manual
Yamaha DVD Player DVD S557 User Manual
Zanussi Washer ZWS 568 User Manual