| ® Range Hood – 24" (58cm), 30" (76.2 cm), 36" (91.4 cm)   PRODUCT MODEL NUMBERS   OVERALL DIMENSIONS   1-1/2"   RH2330XJ   RH2336XJ   RH2630XJ   (3.8 cm)   12"   1"   (2.5 cm)   (30.5 cm)   9"   Electrical: 120-volt, 60-Hz, AC-only, 15-amp. electrical   supply. Use copper wire only. A time-delay fuse or circuit   breaker and separate circuit is recommended.   (22.9 cm)   2"   (5.1 cm)   6"   (15.2 cm)   CABINET OPENING DIMENSIONS   3/4"   (1.9 cm)   1-1/2"   (3.8 cm)   3/8"   (9.5 mm)   7-1/2"   (19.1 cm)   24" (61.0 cm) or   30" (76.2 cm) or   36" (91.4 cm)   min. cabinet   23-7/8" (60.6 cm) – 24" (61.0 cm) model   29-7/8" (75.9 cm) – 30" (76.2 cm) model   35-7/8" (91.1 cm) – 36" (91.4 cm) model   opening width   17-1/2"   (44.5 cm)   24" (61.0 cm ) min.   30" (76.2 cm)   suggested max.   bottom of hood to   cooking surface   VENTING REQUIREMENTS   13" (33 cm)   cabinet depth   Roof Venting   Wall Venting   18" (45.7 cm) min.   24" (61 cm)   suggested max.   bottom of cabinet   to cooking   A D A surface   B B D 36" (91.4 cm)   base cabinet   height   C C A. 6" (15.2 cm) round vent or a 3¹⁄₄" x 10" A. 6" (15.2 cm) round vent or a 3¹⁄₄"   (8.3 x 25.4 cm) vent through roof   (8.3 x 25.4 cm) vent through wall   B. Round vent: use 6" (15.2 cm) round   damper (purchased separately)   B. 3¹⁄₄" x 10" (8.3 x 25.4 cm) vent   through the wall   C. 18" (45.7 cm) to 24" (61.0 cm)   above cooking surface   C. 18" (45.7 cm) to 24" (61.0 cm)   above cooking surface   D. Roof cap   D. Wall cap   3-1/4" x 10" (8.3 x 25.4 cm) vent system   6" (15.2 cm) vent system   3-1/4" x 10"   (8.3 x 25.4 cm)   elbow   elbow   wall   cap   6 ft. (1.8 m)   6 ft. ( 1.8 m)   wall cap   Maximum length   = 35 ft. (10.7 m)   = 35 ft.   (10.7 m)   2 ft.   (0.6 m)   1 - 90° elbow   8 ft. (2.4 m) straight   1 - wall cap   = = = 5 ft. (1.5 m)   8 ft. (2.4 m)   5 ft.   8 ft.   0 ft.   (1.5 m)   (2.4 m)   (0 m)   0 ft.   (0 m)   2 ft.   (0.6 m)   Length of 3-1/4" x   10" (8.3 x 25.4 cm) system   (17.8 cm) system   = 13 ft. (3.9 m)   = 13 ft.   (3.9 m)   Note: Flexible vent is not recommended   Note: Flexible vent is not recommended   6" (15.2 cm) vent system   3-1/4" x 10" (8.3 x 25.4 cm) vent system   3-1/4" x 10"   3-1/4" x 10"   90° elbow =   5 ft. (1.5 m)   45° elbow =   6" (15.2 cm)   3-1/4" x 10"   (8.3 x 25.4 cm)   flat elbow =   12 ft. (3.7 m)   3-1/4" x 10"   (8.3 x 25.4 cm)   wall cap =   3-1/4" x 10"   (8.3 x 25.4 cm)   90° elbow =   5 ft. (1.5 m)   (8.3 x 25.4 cm) to (8.3 x 25.4 cm)   2.5 ft. (0.8 m) wall cap =   0 ft. (0 m)   6" (15.2 cm) =   4.5 ft. (1.4 m)   to 6" (15.2 cm)   90° elbow =   5 ft. (1.5 m)   0 ft. (0 m)   Because Whirlpool Corporation policy includes a continuous commitment to improve   our products, we reserve the right to change materials and specifications without notice.   Dimensions are for planning purposes only. For complete details, see Installation   Instructions packed with product. Specifications subject to change without notice.   Ref. W10112419   02-13-08   Download from Www.Somanuals.com. All Manuals Search And Download.   |