Westinghouse Flat Panel Television UW40T User Manual

USER’S MANUAL  
MANUEL DE L’UTILISATEUR  
MANUAL DEL USUARIO  
UW40T SERIES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
TABLE OF CONTENTS  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TABLE OF CONTENTS  
SETUP ..................................................................... 21  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIGITAL TELEVISION TRANSITION NOTICE  
DIGITAL TELEVISION TRANSITION NOTICE  
This device contains a digital television tuner, so it should receive digital over the air  
TV programming, with a suitable antenna, after the end of full-power analog TV  
broadcasting in the United States on June 12, 2009. The nationwide switch to digital  
television broadcasting will be complete on June 12, 2009, but your local television  
stations may switch sooner. After the switch, analog-only television sets that receive  
TV programming through an antenna will need a converter box to continue to receive  
over-the-air TV. Watch your local stations to find out when they will turn off their  
analog signal and switch to digital-only broadcasting.  
For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see  
the NTIA at 1-888-DTV-2009.  
ENERGY STAR DISCLAIMER  
This Westinghouse product has earned the ENERGY STAR® for meeting U.S.  
Federal energy efficiency guidelines as set by the Department of Energy and  
Environmental Protection agency. The ENERGY STAR® program exists to provide  
energy saving guidelines and help promote energy efficient products and practices.  
Changes to certain features, settings and functions of this TV can change and/or  
increase its power consumption. Depending on how settings are changed, power  
consumption may exceed the limits required for ENERGY STAR® qualification. This  
Westinghouse TV will operate at optimal energy efficiency in “Home” mode.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
IMPORTANT INFORMATION  
IMPORTANT INFORMATION  
Warnings  
To reduce the risk of fire or electric shock:  
Do not expose this product to rain or moisture.  
Do not remove the rear cover. There are no user-serviceable parts inside.  
Refer all servicing requirements to qualified service personnel.  
The plug should be connected to a mains socket outlet with a protective  
earthing connection.  
The lightning flash with arrowhead inside an equilateral  
triangle symbol is intended to alert the user to the presence  
of uninsulated dangerous voltage within the product's  
enclosure that may be of sufficient magnitude to constitute a  
risk of electric shock.  
The exclamation inside an equilateral triangle symbol is intended to  
alert the user to related operating and maintenance instructions in  
the user documentation accompanying the product.  
WARNING!  
This device must be operated with the original power supply.  
WARNING!  
To prevent injury, this apparatus must be securely attached to the floor/wall in  
accordance with the installation instructions.  
CAUTION:  
The power supply outlet should be located near the LED TV and should be easily  
accessible.  
Always use the appropriate AC cord that is certified for your specific country.  
Some examples are listed below:  
USA – UL  
Canada – CSA  
Japan – Electric Appliance Control Act  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
IMPORTANT INFORMATION  
NOTICES  
Important Notices Concerning Power Cord Selection  
The specific power cord for this LED TV is enclosed and has been selected  
according to the country of destination. Use the enclosed power cord to prevent  
electric shock. Observe the following guidelines if it is necessary to replace the  
original cord set, or if there is no cord set enclosed. The female receptacle of the  
cord set must meet IEC-60320 requirements and should look like Figure A1 below:  
Figure A2  
Figure A1  
For the United States and Canada  
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2),  
UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table,  
type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly  
on the floor, only SJT type cord sets may be used. The cord set must be selected  
according to the current rating for the LED TV. Consult the table below for the  
selection criteria of power cords used in the United States and Canada.  
Cord Type Size of Conductor in Cord Maximum Unit Current Rating  
18 AWG  
16 AWG  
14 AWG  
18 AWG  
17 AWG  
10 Amps  
12 Amps  
12 Amps  
10 Amps  
12 Amps  
SJT  
SVT  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT INFORMATION  
FCC COMPLIANCE STATEMENT  
This equipment has been tested and complies with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy, and may cause  
harmful interference to radio communications if not installed and used in accordance  
with the instructions. However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the distance between the LED TV and the receiver.  
Connect the LED TV to an outlet on a circuit separate from to which the  
receiver is connected.  
If the interference persists even after performing the above measures,  
consult the Westinghouse Service Center or an experienced radio/TV  
technician for assistance.  
FCC Warning  
To assure continued FCC compliance, use a grounded power supply cord and the  
provided shielded video interface cable with bonded ferrite cores. If a BNC cable is  
used, use only a shielded BNC (5) cable. Also, any unauthorized changes or  
modifications not expressly approved by the manufacturer will void the user's  
authority to operate this device.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT INFORMATION  
IMPORTANT SAFETY INSTRUCTIONS  
Make sure to note and follow all warnings and instructions marked on the LED TV.  
Observe the following safety instructions.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding  
type plug has two blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug does not fit into  
your outlet, consult an electrician for replacement of the obsolete outlet.  
Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
Only use attachments/accessories specified by the manufacturer.  
Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to avoid injury from tip-over.  
Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT INFORMATION  
Circuit Overload  
Do not overload wall outlets, extension cords, or power strips. This can result in a fire  
or electronic shock.  
Power Cord Protection  
Power supply cords should be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them. Periodically inspect the cords for  
damage. Install the LED TV near a wall socket outlet where the power cord can be  
readily accessed.  
Ventilation  
The slots and openings on the cabinet are provided for necessary ventilation. To  
ensure reliable operation of the LED TV and to protect it from overheating, these  
slots and openings must never be blocked or covered.  
Never cover the slots and openings with a cloth or other materials.  
Do not block the openings by placing the LED TV on a bed, sofa,  
rug or other similar surface.  
Do not place the LED TV in a built-in installation such as a  
bookcase or a rack unless proper ventilation is provided or the  
manufacturer’s instructions have been adhered to.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
IMPORTANT INFORMATION  
WARNINGS AND PRECAUTIONS  
Do not orient the LED TV towards direct sunlight to reduce glare.  
If the LED TV will not be used for a long period of time, unplug the unit and  
remove the batteries from the remote control.  
Avoid touching the display screen by hand or any object.  
Never remove the rear cover. The LED TV interior contains high-voltage  
parts. You may be seriously injured if you touch them.  
Always handle the LED TV with caution when moving it.  
Do not install the LED TV in airtight compartments, or in areas where it can  
be exposed to water or high temperature.  
Ensure that the area around the LED TV is clean and free of moisture.  
Do not place anything on the LED TV that can hinder heat dissipation.  
Do not place naked flame sources, such as lighted candles, on or near the  
LED TV.  
Do not place anything on the LED TV that can cause liquid to splash on it  
(e.g. flower vase).  
Do not place heavy objects on the LED TV, audio/video cables, or power  
cord.  
If the LED TV emits smoke, abnormal noise, or a strange odor, immediately  
turn it off and contact the Westinghouse Service Center by:  
Contacting the Westinghouse Customer Service at (800) 701-0680.  
E-mailing us at [email protected].  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT INFORMATION  
ANTENNA INSTALLATION SAFETY  
Outdoor Antenna Grounding  
If an outside antenna or cable system is connected to the LED TV, be sure the  
antenna or cable system is grounded to prevent voltage surges and built-up static  
charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides  
information on proper grounding of the mast and supporting structure, grounding of  
the lead-in wire to an antenna discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
Antenna Grounding According to the National  
Electrical Code, ANSI/NFPA 70  
Antenna lead in wire  
Antenna discharge unit  
(NEC Section 810-20)  
Grounding clamps  
Grounding Conductors  
(NEC Section 810-21)  
Electric service  
equipment  
Grounding clamps  
Power service grounding  
electrode system  
(NEC Art 250 part H)  
NEC: National Electrical Code  
Lightning  
For added protection for the LED TV during a lightning storm, or  
when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable  
system. DO NOT disconnect the antenna or the power cord during  
a heavy storm—lightning may strike while you are holding the  
cable cord, causing serious injury. Turn off the LED TV and wait for  
the weather to improve.  
Power lines  
An outside antenna system should not be located in the vicinity of  
overhead power lines or other electric light or power circuits, or  
where it can fall into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with them  
might be fatal.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
IMPORTANT INFORMATION  
CLEANING THE LED TV  
Make sure the LED TV is turned off and the power cord is  
disconnected from the power outlet.  
Never spray or pour any liquid directly onto the screen or the  
case.  
To clean the screen:  
1
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other  
particles.  
2
If it is still not clean, apply a small amount of non-ammonia, non-alcohol  
based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.  
To clean the case:  
1
2
Wipe the case with a soft, dry cloth.  
If it is still not clean, apply a small amount of non-ammonia, non-alcohol  
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then  
wipe the surface.  
Dolby-Digital Notice  
Manufactured under license from Dolby Laboratories. Dolby and the double-D  
symbol are registered trademarks of Dolby Laboratories.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PACKAGE CONTENTS  
PACKAGE CONTENTS  
40LED TV Unit  
Remote Control (with 2x AAA batteries)  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
C
D
ENT  
Enter  
Input  
Vol  
Ch  
YPbPr1  
HDMI1  
HDMI2  
Video1  
Video2  
TV  
PC  
YPbPr2  
RMT-11  
LED TV Base  
CD-ROM (User’s manual)  
Power Cord  
Warranty Card  
AC Adapter  
Warranty Brochure  
Screws for Base  
M6 x 10 *4 pcs  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CONTROL PANEL  
CONTROL PANEL  
1
2
3
4
5
Item  
1. MENU  
Description  
Displays the LED TV setup screen.  
• Adjusts the volume during playback.  
• Selects an item on a menu screen.  
• Switches the channel during TV viewing.  
• Selects an item on a menu screen.  
• Selects the video input source.  
2. Volume +/-  
3. Channel  
/
4. INPUT  
5. Power  
• Executes a command on a menu screen.  
Toggles the power on and off.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TERMINALS  
TERMINALS  
1
2
DC IN  
AUDIO  
IN  
VGA  
3
4
VIDEO  
L
IN  
R
5
6
TUNER  
L
OUT  
R
HDMI2  
HDMI1  
USB  
SPDIF  
7
8
9
Item  
Function  
Connects the AC to DC adapter from this outlet to  
a power source.  
Connects to the audio out port of a computer.  
Connects to a computer or other device with a  
VGA output using a 15-pin VGA cable.  
1. DC in  
2. Audio in  
3. VGA  
Connect to an external AV device such as a VCR,  
DVD player, set-top box, or game system.  
4. Composite AV input  
Connects the LED TV to an antenna or cable  
service.  
5. TV tuner  
6. Audio out  
7. HDMI 1/2  
Connect to an analog audio output device.  
Connects to an external AV device such as a  
VCR, DVD player, set-top box, or game system.  
8. USB Service port  
9. SPDIF audio out  
For service only.  
Connects to an external digital audio receiver.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
REMOTE CONTROL  
REMOTE CONTROL  
Item  
Description  
Mutes the sound. Press again to toggle  
the sound back on.  
1. Mute  
Toggles the TV power on or off.  
Adjusts the LED screen backlight.  
2. Power  
3. Backlight  
Toggles the Multichannel Television  
Sound options.  
Toggles the closed caption display on or  
off.  
1
2
4. MTS  
5. CC  
3
5
4
6
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
C
D
Sets the sleep timer for the LED TV to  
turn off automatically.  
Use to key in the channel number.  
Switches to the favorite channels (for  
details on how to save a new favorite  
channel, see page 29).  
6. Sleep zZz  
7. Channel keys  
8
7
8. Favorite  
ENT  
9
9. Enter ENT  
Executes a channel entry.  
10  
11  
Accesses the LED TV setup menus.  
12  
13  
10. Menu  
Enter  
Switches to the last selected channel.  
Navigate through the on-screen menus.  
Executes a command.  
11. Return  
12. Arrow keys  
14  
17  
15  
16  
13. Enter  
Input  
Vol  
Ch  
18  
Displays the Electronic Program Guide  
(EPG). It contains the program  
information for the channel you’re  
watching.  
Displays the input source or channel  
information as well as the system time.  
19  
21  
23  
YPbPr1  
HDMI1  
HDMI2  
Video1  
Video2  
TV  
PC  
14. G  
20  
22  
YPbPr2  
24  
26  
25  
27  
15. Info  
RMT-11  
16. Input  
17. Vol +/-  
Selects the video input source.  
Ajusts the system volume.  
Switches to other TV channels.  
Selects the video display format.  
18. Ch  
/
19. Aspect ratio  
20. YPbPr1  
Selects VGA-Component as the input  
source.  
Selects TV or HDTV as the input  
source.  
21. TV  
22. HDMI1  
23. Video1  
Selects HDMI1 as the input source.  
Selects the Composite AV device as the  
input source.  
24. YPbPr2  
25. PC  
Not supported.  
Selects VGA as the input source.  
Selects HDMI2 as the input source  
Not supported.  
26. HDMI2  
27. Video2  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
REMOTE CONTROL OPERATION  
REMOTE CONTROL OPERATION  
INSTALLING THE REMOTE CONTROL BATTERIES  
CAUTIONS:  
Only use AAA batteries.  
Do not mix new and old batteries. This may result in cracking or leakage,  
which may pose a fire risk or lead to personal injury.  
Insert batteries according to the (+) and (-) markings. Inserting the  
batteries incorrectly may result in cracking or leakage, which may pose a  
risk of fire or lead to physical injury.  
Dispose of used batteries in accordance with local laws and regulations.  
Keep batteries away from children and pets.  
When the remote control will not to be used for an extended period,  
remove the batteries.  
1
Remove the battery cover.  
2
Insert the batteries. Make sure the (+) and (–) marks on the batteries match  
those inside the compartment.  
3
Re-attach the battery cover.  
REMOTE CONTROL TRANSMISSION RANGE  
Transmission range depends upon the reception angle. The range of coverage is 20°  
horizontal/vertical at a distance of 10 feet from the LED TV.  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
LED TV BASE  
LED TV BASE  
CAUTION:  
The LED TV unit may be too heavy for one person to lift. If this is the case,  
make sure to ask for assistance in handling the LED TV to prevent  
physical injury and/or damage to the unit.  
INSTALLING THE LED TV BASE  
1
2
3
4
5
6
7
8
9
Open the LED TV carton box.  
Remove the LED TV base.  
Remove the plastic bag.  
Remove the two top carton stabilizers from the LED TV.  
Remove the protective plastic covering the LED TV.  
Grasp the two sides of the LED TV and then pull it out of the carton box.  
Remove the two bottom carton stabilizers from the LED TV.  
Lay the LED TV on a clear, flat, and stable surface.  
Align the base to the bottom side of LED TV and use four M6 x 10 screws to  
secure it.  
10 Carefully orient the LED TV in an upright position.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
LED TV BASE  
11 IMPORTANT: Use one M6 x 10 screws to fix the  
stand base and LED TV on a wooden table.  
REMOVING THE LED TV BASE  
If you intend to repack the LED TV unit (for shipping or storage) or you want to  
change the installation to a wall mount option, you must first remove the LED TV  
base.  
1
2
3
Turn off the LED TV and all connected devices.  
Disconnect the power cord from the LED TV.  
Disconnect all signal cables from the I/O port  
terminals.  
4
5
6
7
Remove the M6 x 10 screw securing the base to  
the desk.  
Lay the LED TV on a clear, flat, and stable  
surface.  
Remove the screws securing the base to the  
LED TV.  
Detach the base from LED TV.  
8
Pack the screws you removed in step 5 together with the LED TV base for  
future reassembly.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ANTENNA CONNECTION  
ANTENNA CONNECTION  
OUTDOOR ANTENNA CONNECTION  
Cable TV lead in  
VHF, UHF or VHF/UHF  
combination antenna  
75 ohm coaxial cable (round)  
300-75 ohm ADAPTER  
RF IN  
300 ohm twin-lead (flat)  
(Not supplied)  
Separate VHF/UHF Antenna  
VHF Antenna UHF Antenna  
Home Antenna  
terminal (75 ohm)  
300 ohm twin-lead  
COMBINER  
(Not supplied)  
300 ohm twin-lead  
IN OUT  
75 ohm coaxial cable  
NOTE:  
The F-type connector should be finger-tightened only.  
When connecting the RF cable to the LED TV, do not  
tighten F-type connector with any tool. If tools are  
used, it may cause damage to the LED TV (e.g.  
breaking of internal circuit).  
CABLE TV (CTV/DTV) CONNECTION  
The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O  
panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit,  
screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium  
pay channels. Since the signals of these channels are scrambled, a cable TV  
converter/descrambler is usually provided to the subscriber by the cable TV  
company. This converter/descrambler is necessary for normal viewing of the  
scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels  
is used. If a channel is unknown, consult your cable TV company.) For more specific  
instructions on installing cable TV, consult your cable TV company. One possible  
method of utilizing the converter/descrambler provided by your cable TV company is  
explained below.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
EXTERNAL DEVICE CONNECTIONS  
A position on the RF switch (not supplied) – You can view all unscrambled  
channels by using the TV's channel keys.  
B position on the RF switch (not supplied) – You can view the scrambled  
channels via the converter/descrambler by using the converter's channel  
keys.  
RF switch (not supplied)  
Two-set  
A
signal  
OUT  
IN  
B
Cable TV line  
splitter  
(Not  
supplied)  
Cable TV  
converter/descrambler  
(Not supplied)  
EXTERNAL DEVICE CONNECTIONS  
IMPORTANT:  
Turn off the LED TV first before connecting an external device to prevent  
any possible damage or physical injury.  
For more information about external device connections, see the operation  
manual of the external device you wish to connect to the LED TV.  
Make sure that the correct cables are connected to each terminal.  
Improper cable connections may cause damage to the LED TV.  
You can enjoy picture and sound by connecting various audio-video devices to the  
terminals located on the rear and side I/O panels of the LED TV.  
TV cable input – You can use a commercially available audio/video cable.  
Component (YPbPr) input – Picture can be displayed only when a 480i,  
480P, 720P, 1080i, or 1080P signal is received.  
HDMI input – Picture can be displayed only when a 480i, 480P, 720P, 1080i,  
or 1080P signal is received. When you connect to the HDMI terminal with a  
DVI-HDMI conversion cable, there is a possibility that the picture may not  
display correctly.  
Audio output – You can output audio signals from the LED TV set through  
the analog audio out and SPDIF terminals.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EXTERNAL DEVICE CONNECTIONS  
The following diagram shows the external device connections.  
AC to DC adapter  
DC IN  
3.5 mm stereo  
mini jack cable  
AUDIO  
IN  
Audio  
amplifier  
RGB cable  
VGA  
Power outlet  
Home video  
PC  
Composite AV  
cable  
VIDEO  
AUDIO OUT  
game system  
Camcorder  
VCR  
L
IN  
R
SPDIF cable  
DVD  
player  
Digital TV  
tuner  
TUNER  
L
OUT  
R
Antenna cable /  
Cable TV line  
Antenna /  
Cable system  
HDMI2  
HDMI1  
USB  
SPDIF  
DVI-HDMI  
cable  
HDMI-HDMI  
cable  
Audio amplifier  
Audio cable  
AUDIO OUT  
DVD player  
DVD player  
with a DVI  
terminal  
with an HDMI  
terminal  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER CONNECTION  
POWER CONNECTION  
CONNECTING AC POWER  
IMPORTANT:  
The LED TV is designed to be powered via an AC adapter. Use ONLY the  
AC adapter included in the package. Turn off all connected devices before  
plugging the AC adapter into the power outlet.  
Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet.  
INITIAL SETUP  
Press  
on the control panel or on the remote control to turn on the LED TV. Select  
the desired language and select Yes to use the SetupWizard. The SetupWizard will  
guide you on how to set up the LED TV’s operational settings.  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
POWER CONNECTION  
ANTENNA OR COAXIAL CABLE CONNECTION SETUP  
Select Language  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
language to be used for menus and  
messages. Press Enter to continue.  
Time Zone  
Use the up and down arrows on your HDTV  
control panel or remote control to select your  
local time zone. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
Power On Mode  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
power on mode. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
Let’s Get Connected  
Select “Click here to scan channels from the  
Antenna or coaxial cable input.” and press  
Enter on your remote control to start scanning  
channels. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
POWER CONNECTION  
Select Channel Scan Type  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
channel scan type. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
NOTE: Antenna users selecting to scan Over-  
the-Air ATSC channels need a Channel  
Access Code in order to perform a channel  
scan and receive broadcast signals.  
For Antenna [ATSC] only:  
Antenna [ATSC] Channel Access  
Select “Next” and then press Enter to  
continue.  
Press Go Back to return to the previous  
screen.  
Antenna Channel Access Information  
Take note of the channel access information.  
Select “Next” and then press Enter to  
continue.  
Press Go Back to return to the previous  
screen.  
Enter Channel Access Code  
Use the number keys on the remote control to  
enter the channel access code. Press Enter to  
continue.  
Press Go Back to return to the previous  
screen.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER CONNECTION  
Channel Scan in progress  
The channel scan may take a while to  
complete. When the scan is complete, you will  
be able to watch your local TV programming.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER CONNECTION  
CABLE OR SATELLITE BOX CONNECTION SETUP  
Select Language  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
language to be used for menus and  
messages. Press Enter to continue.  
Time Zone  
Use the up and down arrows on your HDTV  
control panel or remote control to select your  
local time zone. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
Power On Mode  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
power on mode. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
Channel Scan - Cable/Satellite Box  
Select “Click here to connect a Cable Box or  
Satellite Box.” and press Enter on your  
remote control to start scanning channels.  
Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
POWER CONNECTION  
Cable/Satellite Box Input  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
input connected to the set top box. Press  
Enter to continue.  
Press Go Back to return to the previous  
screen.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER CONNECTION  
OTHER INPUT SOURCE CONNECTION SETUP  
Select Language  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
language to be used for menus and  
messages. Press Enter to continue.  
Time Zone  
Use the up and down arrows on your HDTV  
control panel or remote control to select your  
local time zone. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
Power On Mode  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
power on mode. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
Let’s Get Connected  
Select “Click here to connect a Game,  
Blu-Ray, DVD, or other player.” and press  
Enter on your remote control. Press Enter to  
continue.  
Press Go Back to return to the previous  
screen.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
POWER CONNECTION  
Select Input Source  
Use the up and down arrows on your HDTV  
control panel or remote control to select the  
input source. Press Enter to continue.  
Press Go Back to return to the previous  
screen.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
BASIC OPERATIONS  
TURNING THE POWER ON AND OFF  
Turning on the power  
Press  
on the control panel or on the remote control to turn on the LED TV.  
Turning off the power  
Press  
on the control panel or on the remote control to turn off the LED TV. The  
LED behavior will depend on the enabled Power settings.  
LED indicator  
Operation  
Turns from none to red. Turn the power on.  
Turns from red to none. Turn the power off.  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
NOTES:  
If you are not going to use the TV for a long time, be sure to disconnect the  
power cord from the wall outlet and remove the batteries from the remote  
control.  
In standby mode, a small amount of electricity is still consumed even when  
the power is turned off.  
ADJUSTING THE VOLUME  
Volume  
Mute  
Press Vol+ to increase the volume; press Vol-  
to decrease the volume.  
Z
C.C.  
Z
Z
MTS  
Mute  
Favorite  
Input  
Press  
to turn off the sound. The mute icon  
Vol  
Ch  
Volume  
appears on the screen. Press again to turn on  
the sound.  
YPbPr1  
HDMI1  
Video1  
TV  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
BASIC OPERATIONS  
CHANGING CHANNELS  
Follow the instructions below to change channels.  
Using the Ch  
/
Buttons  
Browse channels  
Input  
Vol  
Ch  
To browse through the available channels, press Ch  
/
on  
the remote control or on the control panel.  
YPbPr1  
HDMI1  
Video1  
TV  
Using the Channel Keys  
Favorite  
Selecting channel  
A
B
C
D
To change to a certain channel, key in the channel number using  
the channel keys and press ENT.  
Selecting digital channel  
ENT  
To select a digital channel, key in the digital channel number using  
the channel keys and the • key, then press ENT.  
Using the Favorite Keys  
Z
C.C.  
Z
Z
MTS  
Selecting favorite channels  
Favorite  
A
B
C
D
To select a favorite channel, press the Favorite button (A, B, C, or  
D) corresponding to the preferred channel.  
Saving a channel as a favorite  
ENT  
1
Switch to the channel you want to add as a favorite.  
2 Press and hold the Favorite button which you want to add  
the current channel to for 3 seconds.  
3 The Channel Saved message appears to confirm the new  
favorite channel item.  
SELECTING THE INPUT SOURCE  
There are two ways to select the video input source.  
Using the Individual Input Keys  
TV, PC, Video, YPbPr, HDMI Keys  
YPbPr1  
HDMI1  
Video1  
TV  
Press any of the following remote control keys to change the input  
YPbPr2  
HDMI2  
Video2  
PC  
source: TV, PC, Video1, YPbPr1, HDMI1, or HDMI2.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
BASIC OPERATIONS  
Using the Input Key  
Select source using Input Key  
Press Input  
2 A list of supported video sources is displayed.  
Input  
Vol  
Ch  
1
.
YPbPr1  
HDMI1  
Video1  
TV  
3 Press  
4 Press  
/
to select the preferred source.  
to switch to the selected input source.  
ADJUSTING THE DISPLAY FORMAT  
The input source can sometimes affect the way images are displayed on-screen.  
You can adjust the display format to view the image properly.  
Input  
Format Options  
Vol  
Ch  
YPbPr1  
HDMI1  
HDMI2  
Video1  
Video2  
TV  
PC  
Press  
repeatedly to toggle the display format. As you toggle  
YPbPr2  
each option on, the actual display will change accordingly. The  
available options are:  
Standard: Picture is displayed in its original size.  
Fill: Picture is displayed to cover the entire screen.  
Overscan: Picture is scaled up to fit the display area.  
ADJUSTING THE LED BACKLIGHT  
Different viewing conditions can affect the quality of the display. You can adjust the  
LED backlight to suit the current viewing condition.  
Backlight options  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
Press  
repeatedly to toggle the Backlight mode. The available  
options are: Bright Room, Medium Room, and Dark Room.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETUP MENUS  
SETUP MENUS  
SETUP MENU OPERATION  
Use the setup menus to configure the various operational settings of the LED TV.  
Displaying the setup menu screen  
Press on the remote control or MENU on the control panel to display the setup  
menu screen.  
Navigating the setup menu screen  
Use the buttons on the remote control or on the control panel to navigate through  
the menu screens.  
Enter  
Action  
Remote Control  
Control Panel  
MENU  
Displays or closes the menu bar.  
Select and display a primary  
menu.  
Volume +/- then  
/
/
then  
then  
INPUT  
Adjust sub-menu options.  
Select and display a sub-menu.  
Channel  
/
Select a sub-menu or a sub-  
menu option.  
then INPUT  
Returns to the primary menu tab  
from a sub-menu screen.  
MENU  
INPUT  
Returns to the previous screen.  
Applies the selected menu setting.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
AUDIO  
Use the Audio sub-menus to configure the audio quality.  
Press  
on the remote control or MENU on the control panel to display the setup  
menu screen then select Audio to display the Audio sub-menu. The following  
options are available: Bass, Treble, Balance, SS 3D, TV Speaker, Audio Presets,  
and Reset.  
Bass  
Use Bass to calibrate low-pitched sounds.  
Bass  
Adjusting Bass  
1
Use the  
/
keys to select Bass and press  
keys on the remote control to adjust the bass level.  
to save and exit the screen.  
.
2 Press the  
3 Press  
/
Treble  
Use Treble to calibrate high-pitched sounds.  
Treble  
Adjusting Treble  
1
Use the  
/
keys to select Treble and press  
keys on the remote control to adjust the treble level.  
to save and exit the screen.  
.
2 Press the  
3 Press  
/
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUP MENUS  
Balance  
Use Balance to adjust the sound balance between the L/R speakers.  
Balance  
Adjusting Balance  
1
Use the  
/
keys to select Balance and press  
keys on the remote control to adjust the balance level.  
to save and exit the screen.  
.
2 Press the  
3 Press  
/
SS 3D  
Use this sub-menu to toggle the SS 3D on and off.  
SS 3D  
ON  
OFF  
Adjusting SS 3D  
Use the  
1
/
keys to select SS 3D and press  
.
2 Press the  
/
keys on the remote control to select ON or OFF.  
3 Press  
to save and exit the screen.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
TV Speaker  
Use this sub-menu to toggle the LED TV speakers on and off.  
TV Speaker  
ON  
OFF  
Adjusting TV Speaker  
Use the keys to select TV Speaker and press  
keys on the remote control to select ON or OFF.  
to save and exit the screen.  
1
/
.
2 Press the  
3 Press  
/
Audio Preset  
Use this sub-menu to select one of four preset audio options optimized for different  
sounding conditions.  
Audio Presets  
Rock  
POP  
Classical  
Flat  
Custom  
The following options are available:  
Rock: Sets the equalizer to the Rock mode.  
Pop: Sets the equalizer to the Pop mode.  
Classical: Sets the equalizer to the Classical mode.  
Flat: Sets the equalizer to the Flat mode.  
Custom: Uses the customized settings.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Adjusting Audio Preset  
Use the keys to select Audio Preset and press  
1
/
.
2 Press the  
/
keys on the remote control to select the desired option.  
3 Press  
to save and exit the screen.  
Reset  
Select Yes on this sub-menu to reset all audio-related settings.  
Reset  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
VIEW MODE  
Use the View Mode sub-menu to select the aspect ratio of the display.  
Press  
on the remote control or MENU on the control panel to display the setup  
menu screen then select View Mode to display the View Mode sub-menu. The  
following options are available: Standard, Fill, and Overscan.  
Standard  
Picture is displayed in its original size.  
Fill  
Picture is displayed to cover the entire screen.  
Overscan  
Picture is scaled up to fit the display area.  
Adjusting View Mode  
1
Press the  
/
keys on the remote control to select the desired option.  
to save and exit the screen.  
2 Press or  
VIEW MODE (VGA)  
Select VGA as your input source and use the View Mode sub-menu to adjust the  
display in VGA mode.  
Press  
on the remote control or MENU on the control panel to display the setup  
menu screen then select View Mode to display the View Mode sub-menu. The  
following options are available: Aspect Ratio, H. Position, V. Position, Fine Tune, and  
Auto Sync.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETUP MENUS  
Aspect Ratio  
Use this sub-menu to select the display's aspect ratio in the following options:  
Standard: Picture is displayed in its original size.  
Fill: Picture is displayed to cover the entire screen.  
H. Position  
Use this sub-menu to adjust the horizontal position of the display.  
16:9  
A
H. Position  
V. Position  
Use this sub-menu to adjust the vertical position of the display.  
16:9  
A
V. Position  
Fine Tune  
Use this sub-menu to fine tune the display.  
16:9  
A
Fine Tune  
Auto Sync  
Use this sub-menu to synchronize the display automatically.  
16:9  
A
Auto Sync  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
TV PROGRAM  
Use the TV Program sub-menus to manage the channel list, language sound, and to  
scan for available TV channels in your area.  
Press  
on the remote control or MENU on the control panel to display the setup  
menu screen then select TV Program to display the TV Program sub-menu. The  
following options are available: Skip List, Channel Edit, MTS, Auto Search, and  
Manual Add.  
Skip List  
Use Skip List to select the channels you want to skip.  
Channel Skip List  
Clear List  
11.0  
13.0  
16.1  
17.0  
21.0  
22.0  
23.0  
24.0  
:Select  
Enter: Confirm  
Menu: Exit  
Adding Channels to Skip List  
1
Use the  
/
keys to select Skip List and press  
. The Channel Skip  
List screen appears.  
2 Use the  
3 Press  
/
keys to select the desired channel.  
repeatedly to check (add to the Skip list) or uncheck (clear to  
the Skip list) the channels.  
4 Repeat steps 2 and 3 to add more channels.  
5 Press  
to save and exit the screen.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUP MENUS  
Channel Edit  
Use Channel Edit to assign a name to a channel.  
Channel Name Edit  
11.0  
13.0  
16.1  
17.0  
21.0  
22.0  
23.0  
24.0  
:Select  
Enter: Confirm  
Menu: Exit  
Editing Channel Names  
1
Use the  
/
keys to select Channel Edit and press  
. The Channel  
Name Edit screen appears.  
2 Use the keys to select the desired channel and press  
/
to open  
the Edit Name screen.  
3 Use the  
/
/
/
keys to move the cursor to the desired symbol and  
press the  
button to enter.  
• Select Shift to toggle different symbol tables: uppercase and lowercase  
letters, numerals, and special symbols.  
• Select Back to backspace.  
• Select Clear to delete all typed text.  
4 Select Accept when finished.  
5 Repeat steps 2, 3, and 4 to edit more channels.  
6 Press  
to save and exit the screen.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
MTS  
Use MTS to select multichannel television sound.  
The following options are available:  
Mono: Allows mono output (useful when stereo is noisy or inconsistent).  
Stereo: Allows stereo sound for superior TV viewing experience.  
SAP: Allows second audio program from the speakers while watching a  
scene in the original program.  
Adjusting MTS  
1
Use the  
/
keys to select MTS and press  
.
2 Press the  
3 Press  
/
keys on the remote control to select the desired option.  
to save and exit the screen.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Auto Channel Search  
Select Auto Search and press  
. Three options are available:  
Cable: Choose this option to scan for CATV (cable TV) channels when the  
TV is connected using a coaxial cable connection.  
QAM: Choose this option to scan for QAM channels when the TV is  
connected using a coaxial cable connection. When this option is  
selected for the first time, a Channel Access Code must be entered to  
peform channel scan and receive broadcast signals.  
AIR: Choose this option to scan for Over-the-Air ATSC channels with an  
antenna. When this option is selected for the first time, a Channel  
Access Code must be entered to peform channel scan and receive  
broadcast signals.  
Auto Search automatically creates a list of receivable channels for the selected  
source.  
NOTE: To get a free Channel Access Code, contact Westinghouse’s Channel  
Access Service by one of the following methods:  
• Select Channel Access and enter the Access info  
• No personal info is required or collected  
Text Message: Text Tuner to 95495  
Phone: 1-800-701-0680, and then follow the instructions.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Manual Add  
Use Manual Add to add channels manually.  
Channel Add  
_
Enter  
:Select  
Enter: Confirm  
Menu: Exit  
Adding Channels Manually  
1
Use the  
/
keys to select Manual Search and press  
. The Channel  
Add screen appears.  
2 Use the Channel keys on the remote control to enter the channel number  
and select Enter. Wait a few moment for the TV to search for the channel.  
3 When the channel is found, you can select Add to add to channel.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
SETTINGS  
Use the Settings sub-menus to configure the LED TV operational setup and view the  
current firmware version.  
Press  
on the remote control or MENU on the control panel to display the setup  
menu screen then select Settings to display the Settings sub-menu. The following  
options are available: Date and Time, Closed Captions, Parental Control, OSD  
Timeout, OSD Language, Power settings, Reset All, and Version.  
Date and Time  
Use Date and Time to adjust the current date and time.  
Date and Time  
Date  
Day of Week  
Thursday  
JAN 1, 2009  
Time Zone  
Current Time  
10:54 AM  
Eastern (UTC-5)  
Adjust for Daylight Saving Time  
Auto Calibration  
:Select  
Enter: Confirm  
Menu: Exit  
Adjusting Auto Calibration  
1
Use the  
2 Press  
Calibration.  
/
keys to select Date and Time and press  
.
repeatedly to check (enable) or uncheck (disable) Auto  
3 Press  
to save and exit the screen.  
• Enable this option to view the system’s current time.  
• Both Date and Current Time are unavailable for adjustments when  
Auto Calibration is enabled.  
Adjusting Time Zone  
1
2
Use the  
Use the  
/
keys to select Date and Time and press  
keys to select Time Zone and press  
.
/
.
3 Use the  
/
keys to select the desired Time Zone: Samoa, Hawaii,  
Alaska, Pacific, Mountain, Central, Eastern, Atlantic, or  
Newfoundland.  
4 Press  
to save and exit the screen.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUP MENUS  
Adjusting Date and Time  
1
Use the  
/
keys to select Date and Time and press  
.
2 Use the  
/
keys to select Date or Current Time and press  
.
3 Use the  
4 Use the  
/
keys to select a date or time segment.  
keys to adjust the value.  
/
5 Press  
to save and exit the screen.  
Adjusting Daylight Saving  
Use the keys to select Date and Time and press  
2 Press  
1
/
.
repeatedly to check (enable) or uncheck (disable) Adjust for  
Daylight Saving Time.  
3 Press  
to save and exit the screen.  
Closed Captions  
Use Closed Captions to configure the settings for closed captioning in TV programs.  
The following options are available:  
Closed Captions: Can be set to ON or OFF.  
Analog Type: Can be set to CC1,CC2, CC3, CC4, T1, T2, T3, or T4.  
Digital Type: Can be set to CS1, CS2, CS3, CS4, CS5, or CS6.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Font: Can be set to As Broadcaster, Style 1, Style 2, Style 3, Style 4,  
Style 5, Style 6, or Style 7.  
Size: Can be set to As Broadcaster, Small, Medium, or Large.  
Font Color: Can be set to As Broadcaster, Black, White, Green, Blue,  
Red, Cyan, Yellow, or Magenta.  
Background Color: Can be set to As Broadcaster, Black, White, Green,  
Blue, Red, Cyan, Yellow, or Magenta.  
Edge Type: Can be set to As Broadcaster, None, Raised, Depressed,  
Uniform, Shadow Left, or Shadow Right.  
Edge Color: Can be set to As Broadcaster, Black, White, Green, Blue,  
Red, Cyan, Yellow, or Magenta.  
Foreground Opacity: Can be set to As Broadcaster, Solid, Translucent,  
Transparent, or Flashing.  
Background Opacity: Can be set to As Broadcaster, Solid, Translucent,  
Transparent, or Flashing.  
Adjusting Closed Captions Settings  
1
Use the  
/
keys to select Closed Captions and press  
.
2 Use the  
3 Use the  
4 Press  
/
keys to select the desired Closed Captions option.  
keys to adjust the value.  
/
to save and exit the screen.  
Parental Control  
Use Parental Control to block channels and change the password. You must enter a  
six-digit password to use the Parental Control. The factory password is 999999.  
Enter Password  
~
0
9: Key in password  
Enter: Confirm  
Menu: Exit  
After you enter the correct password, the Parental Control menu is shown. By  
default, only the Rating and Change Password submenu are displayed. To display  
the hidden submenu, set Rating to ON.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
The following options are available:  
Rating: Select ON/OFF to hide or display the hidden submenu.  
Block Unrated: Select ON/OFF to block/unlock all unrated programs.  
Adjusting Rating and Block Unrated  
1
Use the  
/
keys to select Rating or Block Unrated and press  
keys to select ON or OFF.  
.
2 Use the  
3 Press  
/
to save and exit the screen.  
TV Rating: Use this sub-menu to customize US TV Rating programs.  
Rating  
TV-Y  
TV-Y7  
TV-G  
Description  
Suitable for young children.  
May not be suitable for children under 7.  
Suitable for all audiences.  
Parental guidance suggested.  
Parental guidance suggested for children  
under 14.  
TV-PG  
TV-14  
Suitable for mature audiences only; may  
be unsuitable for children under 17.  
Fantasy violence, combative situations.  
Suggestive dialogue.  
TV-MA  
FV  
D
L
L Coarse language.  
S
Sexual situations.  
V
Violence.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Adjusting TV Rating  
Use the keys to select TV Rating and press  
2 Use the keys to select the desired rating and press  
1
/
.
/
/
/
repeatedly to block or unblock. You can also select Lock All to block all or  
Unlock All to unblock all.  
3 Press  
to save and exit the screen.  
MPAA Rating: Use this sub-menu to select the ratings of allowable movies.  
Rating  
Description  
Contains nothing most parents will consider offensive for even  
their youngest children to see or hear; suitable for young children.  
May contain some material parents might not like to expose to their  
young children-material that will clearly need to be examined or  
inquired about before children are allowed to view the film.  
May contain some scenes of drug use; use of one of the harsher  
sexually-derived words may be heard. May be inappropriate for  
preteens.  
May contain some adult material. Parents are urged to learn more  
about the film before letting their children view it.  
May contain explicit sex scenes, an accumulation of sexually-  
oriented language, and/or scenes of excessive violence. Suitable  
for adult audiences only. Rating does not signify that the film is  
obscene or pornographic.  
G
PG  
PG-13  
R
NC-17  
X
Contains extreme violence or explicit sex; suitable for adult  
audiences only.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Adjusting MPAA Rating  
1
Use the  
/
keys to select MPAA Rating and press  
.
2 Use the  
/
/
/
keys to select the desired rating and press  
repeatedly to block or unblock.  
3 Press to save and exit the screen.  
Canada English: Use this sub-menu to select the classification categories  
(based on Canadian ratings) of allowable TV programs  
and movies.  
Rating  
Description  
E
Exempt shows  
Suitable for viewing by children of all  
ages.  
C
Not suitable for children under 8 years of  
age.  
C8+  
G
PG  
Suitable for general audiences.  
Parental guidance advised.  
Suitable for people 14 years of age or  
older.  
Suitable for people 18 years of age or  
older.  
14+  
18+  
Adjusting Canada English Rating  
Use the keys to select Canada English Rating and press  
1
/
.
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
2 Use the  
/
/
/
keys to select the desired rating and press  
repeatedly to block or unblock.  
3 Press  
to save and exit the screen.  
Canada French: Use this sub-menu to select the ratings of allowable TV  
programs and movies. These ratings are based on the  
classification categories determined by La Régie du  
cinéma du Québec.  
Rating  
Description  
E
Exempt shows  
G
For general audiences.  
Not suitable for children under 8  
years of age.  
Not suitable for persons under 13  
years of age.  
Not suitable for persons under 16  
years of age.  
Not suitable for persons under 18  
years of age.  
8 ans +  
13 ans+  
16 ans+  
18 ans+  
Adjusting Canada French Rating  
Use the keys to select Canada French Rating and press  
2 Use the keys to select the desired rating and press  
1
/
.
/
/
/
repeatedly to block or unblock.  
3 Press  
to save and exit the screen.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Channel Block: Channel Block allows you to block channels.  
11.0  
13.0  
16.1  
17.0  
21.0  
22.0  
23.0  
Adjusting Channel Block  
1
Use the  
2 Use the  
repeatedly to block or unblock.  
/
keys to select Channel Block and press  
.
/
keys to select the desired channel and press  
3 Press  
to save and exit the screen.  
Change Password: Change Password allows you to change your current  
password.  
Changing Password  
1
Use the  
/
keys to select Change Password and press  
.
2 Use the Channel keys to enter the current password and press  
3 Use the Channel keys to enter the new password and press  
.
.
4 Use the Channel keys to enter the new password again for confirmation  
and press  
.
5 Press  
to save and exit the screen.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
OSD Timeout  
Use OSD Timeout to adjust the OSD duration on the screen: 10 sec, 20 sec, or 30  
sec.  
en  
OSD Timeout  
10 sec  
20 sec  
30 sec  
Adjusting OSD Timeout  
Use the keys to select OSD Timeout and press  
1
/
.
2 Press the  
sec.  
/
keys on the remote control to select 10 sec, 20 sec, or 30  
3 Press  
to save and exit the screen.  
OSD Language  
Use OSD Language to select the language to display on the screen: English,  
French, or Spanish.  
en  
OSD Language  
English  
French  
Spanish  
Adjusting OSD Language  
Use the keys to select OSD Language and press  
1
/
.
2 Press the  
Spanish.  
/
keys on the remote control to select English, French or  
3 Press  
to save and exit the screen.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Power Settings  
Use this sub-menu to configure power-related settings for the LED TV.  
The following options are available:  
VGA port -DPMS: Use this setting to enable or disable VGA port -DPMS.  
Backlight: Use this setting to select the backlight mode: Bright Room,  
Medium Room, or Dark Room.  
Dynamic Contrast: Use this setting to enable or disable Dynamic Contrast.  
Power Light: Use this setting enable or disable Power Light.  
Adjusting Power Settings  
1
Use the  
/
keys to select Power Settings and press  
.
2 Use the  
3 Use the  
4 Press  
/
keys to select a desired option.  
/
keys to adjust the value.  
to save and exit the screen.  
Reset All  
Select Yes on this sub-menu to reset all LED TV operational settings.  
en  
Reset All  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Version  
Use this sub-menu to view the LED TV’s serial number and firmware version.  
en  
Version  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WALL MOUNT OPTION  
WALL MOUNT OPTION  
These 266 x 275 mm mounting holes allow the unit to be mounted on a wall. Please  
take out four M6 bolts from accessory packing. Use the four M6 bolts and four M6 x  
10 screws to wall mount the LED TV.  
WALL MOUNT INSTALLATION REMINDERS  
Remove the LED TV base first before mounting the unit on a wall.  
It is the user's responsibility to use a UL listed wall mount unit rated to  
support the weight of this LED TV.  
Please consult qualified contractors for wall mount installation.  
CAUTION:  
The incomplete or improper mounting of this unit to a wall may cause it to fall down  
resulting to property damage and/or potentially serious injury.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
TROUBLESHOOTING  
TROUBLESHOOTING  
Problem  
Corrective Action  
Make sure the power indicator is illuminated  
red.  
Make sure the power cord is securely  
connected to the AC-in jack and is plugged  
into a functional AC outlet. You may want to  
plug in another electrical device to the power  
outlet to verify that it is supplying the proper  
voltage.  
No power  
Power is suddenly  
turned off.  
Make sure the sleep timer is turned off.  
Press only one button at a time.  
Remote control  
does not work.  
Make sure the batteries are properly inserted.  
The batteries may already be drained out.  
Replace batteries with new ones.  
Remote control  
code cannot be  
detected by a  
Purchase a separate learning remote control.  
codes.  
universal remote.  
Make sure the video input cable is properly  
connected to the correct terminal, and that the  
correct input mode is enabled. To illustrate,  
when a VGA cable is connected to display a  
computer screen, the PC input mode must be  
enabled.  
No picture  
Verify that the antenna is properly connected  
and that the preferred channel is enabled in  
the channel list. Press and select  
Channels/Channel List.  
Adjust the display settings.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TROUBLESHOOTING  
Problem  
Corrective Action  
Make sure the VGA cable is properly  
connected to the LED TV’s VGA port.  
No picture or the No  
Signal message  
appears when a  
VGA cable is  
Decrease the video resolution setting on the  
computer and try again.  
connected.  
Adjust the display settings.  
Picture is cut off or  
appear in a sidebar  
screen.  
Press  
to adjust the Aspect ratio.  
Check your antenna connection. If necessary,  
rotate the antenna and wait up to ten seconds  
for a signal.  
Reduce signal splitters and excessively long  
cables.  
Poor image quality  
in TV mode (cutoff  
picture, snowy  
images).  
Replace poor antenna cables and/or  
connectors to improve signal quality.  
Press  
to adjust the Aspect ratio.  
Adjust the Noise Reduction setting in Picture  
menu.  
In HDMI mode, make sure the external device  
is compatible with the LED TV.  
If any colors (red, green or blue) are missing,  
check the video cable to make sure it is  
securely connected. Loose or broken pins in  
the cable connector could cause an improper  
connection.  
Wrong, abnormal or  
missing colors  
Adjust the Hue, Saturation and Color  
Temperature settings in Picture menu.  
Connect the TV to another computer and  
check if the problem is with the computer  
screen.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Problem  
No sound  
NOTES:  
Corrective Action  
Make sure the audio input cable is properly  
connected to the correct terminal, and that the  
correct input mode is enabled.  
The volume may be muted, press or Vol+ key  
to turn on the volume.  
Adjust the Bass, Treble, and Balance settings  
in Audio menu.  
If you are using the TV speakers, make sure  
the TV Speakers option is set to On in Audio  
menu.  
If you are using an external audio device,  
press and select Audio to make sure the TV  
Speakers option is set to Off in Audio menu.  
If the problem condition persists even after performing the  
recommended corrective actions, contact us by:  
Contacting the Westinghouse Customer Service at (800) 701-0680  
or e-mail us at [email protected]  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
SPECIFICATIONS  
Item  
Specification  
Model Name  
UW40T3PW  
Active Area  
(Diagonal, mm)  
885.6 (H) x 498.15 (V)  
1920 (H) x 1080 (V)  
3000:1  
Resolution  
Contrast Ratio  
(min)  
Panel  
Response Time  
(min)  
6 ms (g-g)  
Aspect Ratio  
Display color  
1.77 (16:9)  
1.07 Billion  
HDMI x2  
AV with R/L Audio x1  
VGA with 3.5 mm mini jack x1  
SPDIF Out x1  
Audio/Video  
Input/Output  
Terminals  
USB for service x1  
Tuner x1  
R/L Audio Line Out X1  
Speaker Out  
AV Timing  
10W (2 channels)  
480i/p, 720p, 1080i/p  
640 x 480 @ 60Hz/75Hz,  
800 x 600 @ 60Hz/75Hz,  
1024 x 768 @ 60Hz/75Hz,  
1280 x 1024 @ 60Hz,  
1920 x 1080 @ 60Hz  
PC Timing  
Power Consumption  
(Watts)  
90W (@ 19V DC)  
Power Consumption  
(Standby, Watts)  
<1W  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SPECIFICATIONS  
Item  
Specification  
With stand:  
937.83 x 622.16 x 200.89 mm  
36.9 x 24.5 x 7.9 inch  
Dimensions  
(WxHxD)  
Physical  
Without stand:  
Specifications  
937.83 x 572.38 x 68.23 mm  
36.9 x 22.5 x 2.7 inch  
12.7 kg (28 lb)  
Weight (Net)  
Weight (Gross) 16 kg (35.27 lb)  
NOTES:  
These product specifications are subject to change without user  
notification.  
Do not set your computer graphics card to exceed the unit’s refresh  
rates; doing so may cause damage to the LED TV.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Westinghouse Flat Panel Television SK 32H640G User Manual
Whirlpool Dishwasher DP8700XTN0 User Manual
Whirlpool Oven GY396LXPB02 User Manual
Whistler Radar Detector XTR 180 User Manual
Winegard TV Antenna HD 9022 User Manual
Xantrex Technology Power Supply 18V 10A User Manual
Zanussi Clothes Dryer TC 7103 W User Manual
Zanussi Convection Oven 240202 User Manual
Zanussi Cooktop FH10 User Manual
Zanussi Dishwasher ZSF 4111 User Manual