OWNER’S MANUAL
Dear Whistler Owner,
Model Features Summary .................... 2-3
Installation ........................................... 4-6
If you have questions concerning the operation of
•Battery Installation
4
5
this Whistler product please call:
•Mounting Guidelines
•Windshield Mounting
5- 6
CuSTOmer SeRVICE
•Power Connection and Fuse Replacement
6
XTR-180/ XTR-185
XTR-190/XTR-195
Operation .......................................... 6 - 13
•Battery Life
6
6
1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT
or visit our website
•Battery Charging
•Power On, Self-Test Mute
•Setting Saver
7
7
•Feature Engaged Confirmation
•Audio Level Adjustment
•Quiet Mode
7
7
8
www.whistlergroup.com
Battery
•Auto Quiet Mode
•City/City 1/ City 2 Mode
•Highway Mode
8
9
Please keep the receipt in a safe place. You may regis-
warranty verification purposes, a copy of your dated
store receipt must still accompany any unit sent in for
warranty work. If the unit is returned without a dated
store receipt an out of warranty service charge applies.
Note: Your wwaarrantyy ppeeriiood bbeginss at thhe ttiimme ooff puur--
chase. The warranty is validated only by the dated
store receipt! Now is the time to record the serial
number of the unit in the space provided in the war-
ranty section of the manual.
10
10
10
11
11
12
13
Powered
•Teach/Tutorial Mode
•Dim/Dark
•Engaging/Disengaging VG-2
•VG-2 Detection/Alerts
•Auto Shut Off Mode
•Stay Alert Feature
LASER-RADAR
Safety Warning System™ ......................... 13
Laser/Radar Alerts ................................. 14
DETECTOR
•Speed Radar Audio/Visual Alerts
•Laser Audio/Visual Alerts
14
14
14
15
®
The Whistler Group Corporate Headquarters
13016 N. Walton Blvd. • Bentonville, AR 72712
Tel 479.273.6012 • Fax 479.273.2927
•Pulse Protection
•Alert Priority
POP™ Mode Alerts ................................. 15
Reset Features ....................................... 16
Troubleshooting Guide ..................... 16-17
Care and Maintenance ........................... 18
Are Detectors Legal? ............................. 18
FCC Information ..................................... 19
Speed Monitoring ............................ 19 - 22
To fully acquaint yourself with the operation of your
Whistler and to better understand the differences
between detecting radar, laser and safety radar sig-
nals, we recommend reading this entire manual or
group.com
Customer Return Center
551 N. 13th St. • Rogers, AR 72756
Customer Service Tel 800.531.0004
www.whistlergroup.com
•Radar Facts
19
19
20
20-21
21 -22
™
•POP Mode
P/N 203343
©
2008 The Whistler Group, Inc.
Enjoy your Whistler and please drive safely.
Sincerely,
™
•Total Band Protection
•Laser Facts/Tips
•Other Speed Detection Systems
Warranty Information ....................... 22-25
Specifications ......................................... 25
Accessories ............................................ 26
The Whistler Group, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
OPERATION
OPERATION
Windshield Mounting
Battery Life
Power On and Self-Test
• Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
The unit can provide approximately 15 hours of
laser/radar detection. There are settings that can
maximize battery life.
Each time your Whistler detector is turned on,
an automatic self-test sequence confirms that
the speaker and visual displays are functional.
• Press Power. Display shows in order:
1) Display intensity set to Dim
2) Auto Quiet engaged
1. X-Band 2. K-Band
3. Ka-Band 4. LASER
3) Auto Shut Off set to 1 hour
5. SWS
6. Battery Status
7. Highway
Rubber Bumper
4) Using a lower volume setting
Self Test Mute
5) Using Mute whenever possible
Important: The detector’s display will flash a “I”
and three fast beeps will sound when the batter-
ies have approximately one hour of battery life
left. This is a reminder to recharge your batter-
ies.
• Press the suction cups onto the windshield at the
location you have chosen.
Simply press the Quiet button during the
self-test sequence to cancel the self-test audio. This
will not affect radar/laser alerts. To restore the
self-test audio, simply press the Quiet button during
the next self-test.
Windshield
Mounting
• Slide the detector onto the bracket until it locks
into place.
Battery Charging
Setting Saver
Setting Saver saves your personalized settings
when the detector is turned off or you lose power.
• If necessary, the unit may be leveled by bending
the windshield bracket.
Power Cord: Plug your included power cord into
your detector and into your lighter socket to
slowly charge the rechargeable batteries. This
will also provide power to the detector. The dis-
play will dimly blink the “III” icon when the unit
is charging the batteries. When the power cable
is removed from the detector or the vehicle’s
lighter socket is switched off, the unit will alarm
and illuminate the icons in a sequencing fashion,
then turn off.
Note: As with all battery operated devices, remove
the batteries when this unit will not be used for an
extended period of time. Damage caused by leaky
or improperly charged batteries are not covered
under warranty.
• Press the bracket release button and remove the
detector before bending.
Feature Engaged Confirmation
Each time a button is pressed, one beep confirms
feature “on”, two beeps confirm feature “off”.
Power Cord Connection
• Plug the small end of the power cord into the
unit’s power jack.
• Plug the large end into the vehicle’s cigarette
lighter socket.
Audio Level Adjustment
The audio levels can be adjusted high to low or
low to high.
Note: Cord fits tightly into detector. When installing
• Press and hold the “VOL” button and the
volume level will increase (Level “III”) then
proceed to lower the volume (Level 0).
Continuing to hold this button will repeat the
sequence. As audio level is adjusted, beeps are
provided and the display indicates volume level.
the cord, expect some resistance.
Fuse Replacement
The lighter socket plug is equipped with a
replaceable 2 amp 3AG fuse located behind the
silver tip. To replace the fuse, carefully unscrew
the tip of the plug.
Solar Panel: In direct sunlight, the solar panel
provides an additional charge to the batteries.
The solar panel is not functional when the unit is
powered by the power cord.
Important: Unscrew slowly. The tip contains a spring
which may fly out when disassembling. Insert the new fuse
with the spring and screw on the tip. With use, screw cap
on plug may loosen. Retighten occasionally.
Unscrew the tip of the lighter socket plug
carefully when replacing the 2 amp fuse.
5
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
OPERATION
Quiet Mode
City/City I/City II Mode
Highway Mode
Quiet cancels audio during an alert and any new
alert within 20 seconds. After 20 seconds,
approximately 2 beeps are provided on any new
alert and unit then remains quiet.
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door open-
ers, intrusion alarms and other devices which
share frequencies with police radar. Generally, X
band is used for these devices.
Highway mode provides full audio warnings any
time radar (X, K, Ka, Safety Radar) or laser sig-
nals are detected, and is recommended for open
road driving.
• Press Quiet to cancel the audio.
For more information on City and Highway mode,
please visit our FAQ page on our website:
www.whistlergroup.com
• Press Quiet a second time during an alert to
restore the standard audio alert pattern; or turn
the unit off, then on.
• Press City to cancel Highway mode and
engage City. Display will switch from “H” to “C”
• Press City again to enter City I Mode
• Press City again to enter City II Mode
Note: After 3 seconds, “I” or “II” City Mode
indicator turns off.
• Pressing City a fourth time cancels City II Mode
and returns the unit to Highway Mode.
Teach/Tutorial Mode
Auto Quiet Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet simultaneously and release.
• Unit will go thru all the bands detected.
• Press Power to exit.
Auto Quiet reduces the selected audio level to
level (1) approximately 5 seconds after a radar or
safety radar signal is detected. The alert for any
new signal within 20 seconds will resume at level
(1). Auto Quiet does not affect VG-2 or laser
alerts.
Dim/Dark Mode
Dim/Dark Mode reduces the illumination of the
display
In City Mode, weak speed/safety radar signals
give an initial alarm of two beeps, and then
remains quiet unless the signal becomes very
strong. When the signal strength increases, two
additional beeps are provided. City I and City II
Modes operate the same as Highway Mode, but
in City I Mode, only the X band sensitivity is low-
ered. In City II Mode, X-band is not detected.
• Press Quiet/Menu (before a signal is detected)
to engage Auto Quiet.
• Once the Auto Quiet mode is engaged, you
may cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
• Press and hold “Power” for 2 seconds to
reduce illumination to a dim setting
• Pressing and holding the “Power” button a
second time engages Dark Mode. The
display illumination is further reduced.
Dim or Dark can be engaged during an alert. In
Dark Mode, the display goes dark for as long as
a signal is being detected and 20 seconds after,
then the display returns to the dimmer setting.
Caution: Some towns/small cities may still be
using X band radar. City Modes do not change
the audio alert for laser or VG-2.
• Pressing and holding the “Power” button a
third time restores the display to full
illumination.
8
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION
OPERATION
Engaging/Disengaging VG-2
To engage VG-2:
Auto Shut Off Mode
Stay Alert Feature
Auto Shut Off Mode automatically shuts off the
detector if you forget.
The timer is reset:
The Stay Alert Feature is designed to test a dri-
ver’s alertness. To engage (when unit is not alarm-
ing):
• Press and hold the “Quiet” button until the
“V/L” is illuminated.
To disengage VG-2:
1. Each time the detector is turned off
2. The optional power cord is unplugged
3. Any button is pressed before the timer has
expired.
The detector will alert you with an audible and
visual warning before it shuts off. This auto off
function can be programmed for the following:
Off, 1, 2, or 3 hours.
• Press and hold City until a first audible alert is
given. The “H” or “C” will flash indicating Stay
Alert is activated.
• Press and hold the “Quiet” button until the
“V/L” turns off.
VG-2 Detection
Within 30-60 seconds two beeps are sounded;
to show alertness, the driver must press either
the “City”, “Volume”, or “Quiet” buttons within
3-5 seconds. If a button is pressed within 3-5 sec-
onds, the cycle is repeated.
When a VG-2 signal is detected, the VG-2 alert is
sounded for 3 seconds and the display flashes
the “V/L” icon for 30 seconds.This cycle is
repeated if the VG-2 signal is again detected.
During the period a VG-2 signal is detected, a
radar signal cannot be detected. However,
because the VG-2 alert has confirmed that a
patrol car is nearby, you are already aware of the
potential for speed monitoring and can adjust
your speed accordingly. Laser detection is not
affected while a VG-2 signal is detected.
During this warning you can reset the timer by
pressing any button.
If a button is not pressed within 3-5 seconds an
alarm sounds and displays multiple scrolling icons
If the unit has automatically turned itself off, press
the Power button to turn the unit back on. You can
manually engage the Auto Shut Off Mode by
pressing and holding the City button until one
beep is heard.
• Press Power to cancel Stay Alert.
WARNING!!! Stay Alert is NOT intended as a
substitute for adequate rest. You should NOT oper-
ate a vehicle if you are drowsy. During extended
periods of vehicle operation, you should take fre-
quent breaks. Improper reliance on the Stay Alert
feature may result in vehicle damage, personal
injury or death. NEVER OPERATE A VEHICLE IF
YOU ARE DROWSY.
VG-2 Audio/Visual Alerts
Note: You must turn this feature on before it will
detect VG-2.
When a VG-2 signal is detected, the detector ‘hides’ its
own radiated signal and becomes undetectable by
the VG-2.
Every 30 seconds, the detector checks for a VG-2
signal. If a VG-2 signal is still present, the unit
continues to hide and repeats the VG-2 alert. If no
signal is detected, two beeps are provided,
indicating an “all clear” condition. During a VG-2
Alert X, K, and Ka band signals cannot be
received (Reference page 21 for VG-2 information).
The Auto Shut Off feature can be disabled or
changed to 1 hour, 2 hours, or 3 hours. Press
and hold the “Quiet” button for approximately
2 seconds until a single beep is heard. The dis-
play will flash the “H” or “C” and the signal
strength indicators “I”, “II” or “III”, representing
hours. Pressing the “Volume” button will change
the selection. When no signal strength icons are
flashing, the feature is disabled.
SWS
Safety Warning System™
In communities where Safety Warning System™
transmitters are located, the detector will
receive over 60 messages. When Safety Radar is
detected, the audio alert is given and the dis-
play alternately flashes the “I”, “III” and “II”
icons.
Note: Not all areas have Safety Warning System™
transmitters.
11
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LASER/RADAR ALERTS
ALERT PRIORITY
RESET FEATURES
Speed Radar Audio/Visual Alerts
When X, K, or Ka band is detected, the band ID
and signal strength is displayed. The audio alert
is continuous and has a geiger counter-like
pattern. The faster the beep, the closer or
stronger the radar source.
Alert Priority
Reset Features
When two or more signals are received at the
same time, the alert priority is:
1. Laser
All user features can be reset to factory settings.
• Unplug Power Cord from unit.
• Remove Batteries.
2. VG-2
• Press and hold Power and Quiet.
• Plug Power Cord into unit.
• Wait for 2 beeps.
3. Speed Radar
4. Safety Radar
“I” = weak signal, “III” = strong signal
• Release Power and Quiet buttons.
Example:
Unit is now reset to the following features
and settings.
Default factory settings are:
1. Audio to level (4)
2. Display shows “H”
3. Auto Quiet Mode OFF
4. VG-2 Detection Mode OFF
5. Auto Shut Off to 1 hour
6. Full Power Up sequence
7. Dim/Dark to full Illumination
If X band is alerting, then suddenly a VG-2
signal is detected, the VG-2 warning will
override the X band alert.
“K/Ka” Icon will flash for Ka detection
Laser Audio/Visual Alerts
When a laser signal is detected, the “V/L” will
be illuminated.
POP MODE ALERTS
POP™ Mode Alerts
®
Pulse Protection
Because POP™ Mode travels on regular radar
bandwidth, there is no particular alert for POP™
Mode transmissions. POP™ Mode alerts will be
displayed as a regular radar alert.
Pulse (or instant-on) radar is more difficult to
detect than conventional radar because it
remains off until activated to measure the speed
of a targeted vehicle.
TROUBLESHOOTING
When a pulse type transmission is detected, your
Whistler detector sounds an urgent 3-second
audio warning and the display will show a max
signal strength level.
Your Whistler detector is expertly engineered
and designed to exacting quality standards to
provide you with reliable, trouble-free operation.
If your unit has been correctly installed following
the guidelines in this manual, but is not
operating optimally, please refer to the
troubleshooting guide below.
Max Signal
After the 3-second pulse alert, the standard alert
pattern continues for as long as the signal is
present.
It is important to respond promptly to a pulse
alert, since warning time may be minimal.
PROBLEM: No display or audio.
• Make sure batteries are installed with the
correct polarity.
• Make sure batteries are fully charged.
• Make sure battery contacts are clean.
• Check fuse in Whistler plug; replace if
necessary with a 2 amp 3AG type.
14
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
CARE AND MAINTENANCE
FCC INFORMATION
• Check fuse for lighter socket; replace if
necessary.
FCC ID : HSXWH15
Care And Maintenance
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device many not cause harmful interfer-
ence, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Important: FCC requirements state that
changes or modifications not expressly approved
by Whistler could void the user’s authority to
operate the equipment.
During the summer months, avoid prolonged
exposure to direct sunlight by removing your unit
from the dash when your vehicle is parked for an
extended period of time. Do not spray water,
cleaners, or polishes directly onto the unit. The
spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive
cleaners on the unit’s exterior.
• Make sure lighter socket is clean.
PROBLEM: Unit alarms when vehicle hits
bumps.
• Make sure batteries are seated properly.
• Make sure that the battery door is fully closed.
• Make sure battery contacts are clean.
• Check for loose lighter socket; tighten and
clean.
• Check connections at both ends of power
cord. Substitute another cord to determine if
cord is defective. Return defective cord to
the factory.
As with all battery operated devices remove the
batteries when this unit will not be used for an
extended period of time. Damage caused by
leaky or improperly charged batteries are not
covered under warranty. Check with the battery
manufacturer about the specific battery warranty.
SPEED MONITORING
Radar Facts
PROBLEM: Audio alerts are not loud
enough.
• Cancel Auto Quiet Mode or City Mode.
• Check audio level setting (see pages 7-8 ).
A radar gun operates by transmitting radio
waves at certain frequencies which reflect off
objects and are picked up by the radar gun’s
receiving section. When a radar beam reflects
off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles
per hour to determine your vehicle’s speed.
Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar
guns at X Band (10.500 - 10.550 GHz), K Band
(24.050 - 24.250 GHz), and Ka Band (33.400 -
36.000 GHz).
ARE DETECTORS LEGAL?
In Most States YES!
Laser-Radar detectors are legal in every state
(with the exception of Virginia and Washington,
D.C., which have local regulations restricting the
use of radar receivers in any vehicle) when used
in automobiles or light trucks (under 10,000 lbs.).
PROBLEM: Low Battery Life.
• One or more of the batteries may be
defective.
• See the battery life tips on page 6.
If difficulties occur which cannot be solved by
information in this Troubleshooting Guide, please
call Whistler Customer Service at 1-800-531-0004
or visit our FAQ page at
www.whistlergroup.com/faq-detectors.asp,
before returning your unit for service.
Concerning trucks over 10,000 lbs., the Federal
Highway Administration (FHWA) issued a
regulation, effective January, 1994 which prohibits
radar and laser detector use in these types of
vehicles nationally. Prior to the FHWA regulation,
laws existed in the state of New York restricting
the use of radar detectors in trucks over 18,000
lbs. and in Illinois in trucks over 26,000 lbs.
Note: A radar detector will not alarm if an offi-
cer is not transmitting on any one of the above
radar bands.
PROBLEM: Unit turns itself off
• See Auto Shut Off Mode feature on page 12.
POP™ Mode
POP™ Mode is a feature on some newer radar
guns operating on K and Ka bands. When the
gun is in POP™ Mode and activated, a brief burst
of energy, less that 1/15 of a second, is transmit-
ted and the vehicle’s speed is quickly acquired. A
detector without POP™ Mode detection capabili-
ty cannot respond to this brief transmission.
19
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEED MONITORING
SPEED MONITORING
SPEED MONITORING
Note: Having a radar detector capable of
detecting the VG-2 may alert you to the pres-
ence of a speed trap. The newest tool Police
have to detect radar detectors is called Spectre.
Spectree can detect the majority of undetectable
(VG-2) laser/radar detectors on the market.
Total Band Protection™
Laser Tips
Complete Band Coverage that detects laser,
radar, VG-2 and safety radar bands.
If you are the targeted vehicle, a laser gun can
often determine your speed within a few
seconds after you receive an alert. In this situa-
tion there is generally no time to safely adjust
your speed. However, if you are traveling near or
behind the targeted vehicle and receive an alert,
response time should be sufficient. Any laser
alert, regardless of duration, requires immediate
action!
Laser Facts
It’s well documented that many radar guns
cannot reliably provide the speed of a targeted
vehicle that is traveling in a group of vehicles. In
contrast, a laser gun can target a specific vehicle
out of a line of traffic and determine its speed.
The advantage of laser over radar in terms of
target identification is the result of the laser gun’s
narrow beam. A radar gun’s transmission can
cover more than a four-lane highway at a dis-
tance of 1,000 feet, compared with a laser gun’s
transmission which covers about 3 feet at the
same distance. For best protection, keep these
points in mind:
It is the responsibility of the individual radar detector
owner to know and understand the laws in your area
regarding the legality of the use of radar detectors.
WARRANTY INFORMATION
Other Speed Detection Systems
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can provide
a warning. These techniques include:
Consumer Warranty
This Whistler Laser-Radar detector is warranted
to the original purchaser for a period of one year
from the date of original purchase against all
defects in materials and workmanship. This
limited warranty is void if the unit is abused,
modified, installed improperly, if the housing and/or
serial numbers have been removed. There are no
express warranties covering this product other than
those set forth in this warranty. All express or
implied warranties for this product are limited to the
above time. Whistler is not liable for damages
arising from the use, misuse, or operation of this
product.
• Pacing - A patrol car drives behind you and
matches your driving speed.
• Vascar/Aircraft - The time it takes a vehicle to
travel a known distance is measured.
• Because the vehicle’s license plate or
headlights are the laser gun’s primary targets,
mounting the Whistler detector on the
dashboard can improve laser detection at short
range.
• Do not follow closely behind any vehicle you
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your detector
won’t either.
• The receiving range of a laser detector will
not be the same as a radar signal. Laser guns
are most often used at short range.
Radar Detector Detectors: VG-2,
Spectre
The Interceptor VG-2 or simply VG-2, is one type of
microwave receiver used by Police to detect signals
radiated by the local oscillator of a radar detector.
Because it purpose is to identify persons driving with
radar detectors, these devices are known as a “radar
detector detector” (RDD).
Note: Damaged caused by incorrect battery
placement or battery leakage is not covered
under this warranty.
An RDD is the primary tool used by the police to
identify radar detector equipped vehicles. If caught
in a state or country where detectors are illegal (see
page 18). drivers risk losing their radar detector and
receiving a fine. In addition, instant-on radar is
almost always used in combination with a RDD,
leaving unsuspecting motorists vulnerable to receive
two tickets - one potentially for speeding, the other
for possession of a detector.
Whistler Laser-Radar detectors receive all current
laser guns which operate at a laser wavelength of 905
+/- 10nm.
•Pro Laser™ I II III
•LT1 20-20
•Ultra Lyte
20
21
22
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
WARRANTY INFORMATION
WARRANTY INFORMATION
ACCESSORIES
3. Be certain your unit is returned with its serial
number. For reference, please write your unit’s
serial number in the following space:
s/n______________.
Important: When returning your unit for service,
be certain to include a daytime telephone
number and an email address (if applicable).
Service Under Warranty
These and other accessories can be
ordered directly from Whistler by calling
1-800-531-0004 or visiting our online store
at www.whistlergroup.com
During the warranty period, defective units will
be repaired without charge to the purchaser when
returned with a dated store receipt to the address
below. Units returned without a dated store
receipt will be handled as described in section
“Service Out Of Warranty.”
Due to the specialized equipment necessary for
testing a Laser-Radar receiver, there are no
authorized service stations for Whistler brand
detectors other than Whistler.
Customer Service
Units without serial numbers are not covered under warranty.
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call Customer Service at:
Important: To validate that your unit is within
the warranty period, make sure you keep a
copy of your dated store receipt. You may
register your warranty online at
O
Price
$ 9.95
202152
206552
206553
206880
Windshield Bracket Kit
Straight Power Cord (5’)
Coiled Power Cord (7’)
1-800-531-0004
Representatives are available to answer your questions
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or
visit the FAQ’s at www.whistlergroup.com.
warranty verification purposes, a copy of
your dated store receipt must accompany any
unit sent in for warranty work.
$14.95
$15.95
$ 9.95
When returning a unit for service under
warranty, please follow these instructions:
Hardwire Kit (10' )
(for wiring to fuse box)
Service Out of Warranty
SPECIFICATIONS
Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
Units will be repaired at ‘out of warranty’ service
rates when:
1. Ship the unit in the original carton or in a
suitable sturdy equivalent, fully insured, with
return receipt requested to:
206666
Modular Cord Package
(includes coiled and straight
cords, and power adapter)
$17.95
• The unit’s original warranty has expired.
• A dated store receipt is not supplied.
• The unit has been returned without its serial
number.
Whistler Repair Dept.
551 N. 13th St.
Rogers, AR. 72756
402081
206660
Non Skid Dash Pad
$ 6.95
$11.95
Straight Modular Cord &
Socket Multiplier
• The unit has been abused, modified,
installed improperly, or had its housing
removed.
Operating Temperature Range:-20˚ C to +80˚ C
(-4˚ F to +176˚ F)
Please allow 3 weeks turnaround time.
206661
500501
Coiled Modular Cord &
Socket Multiplier
Zipped Travel Case
$12.95
$ 9.95
Important: Whistler will not assume responsi-
bility for loss or damage incurred in shipping.
Therefore, please ship your unit insured with
return receipt requested. CODs will not be
accepted!
The minimum out of warranty service fee for
your Whistler detector is $55.00 (U.S.). If you
require out of warranty service, please return
your unit as outlined in the section “Service
Under Warranty” along with a certified check or
money order for $55.00. Payment may also be
made by MasterCard, VISA or American
Express; personal checks are not accepted.
Power Requirements:
3 AA Ni-MH batteries 1.2 volts each.
12 volts with power cord.
Modular: Interconnecting pieces cord and plug.
Shippiing andd handlling (peer ordeer) $5..000 . Priices are
subject tto changee withoutt notice.
One or more U.S. patents may apply:
#5,146,227, #5,379,456, #5,666,120, #5,990,821,
#7,215,276
2. Include with your unit the following
information, clearly printed:
• Your name and street address (for
shipping via UPS), a daytime telephone
number and an email address, if applicable.
• A detailed description of the problem (e.g.,
“Unit performs self-test but does not respond
POP™ Mode is a trademark of MPH Industries,
Inc.
In the event repairs cannot be covered by the
minimum $55.00 service fee, you will be con-
tacted by a Whistler technical service special-
ist who will outline options available to you.
If you elect not to have your unit repaired, it will
be returned to you along with your certified
check or money order.
Specifications are subject to change
without notice.
`
to radar”).
• A copy of your dated store receipt or bill of
sale.
SWS® is a trademark of Safety Warning System L.C.
23
24
25
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|