USER’S MANUAL
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
LVM-37w3
1080p Monitor
Moniteur 1080p
Monitor 1080p
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1. PRODUCT SAFETY
SAFETY GUIDELINES ........................................................................2
PRODUCT SAFETY INSTRUCTIONS .....................................................3
2. INSTALLATION
PACKAGE CONTENTS........................................................................4
FRONT VIEW OF THE 1080PMONITOR ................................................5
REAR VIEW OF THE 1080P MONITOR .................................................5
SIDE VIEW OF THE 1080P MONITOR ..................................................6
REMOTE CONTROL...........................................................................8
INSTALLATION ..................................................................................9
3. OSD FUNCTION
OSD FUNCTION.............................................................................12
PICTURE .......................................................................................13
PC PARAMETERS...........................................................................14
AUDIO...........................................................................................15
PICTURE-IN-PICTURE .....................................................................17
GENERAL SETTINGS.......................................................................17
4. APPENDIX
TROUBLESHOOTING .......................................................................18
CLEANING THE 1080P MONITOR......................................................20
SPECIFICATIONS ............................................................................20
i
Download from Www.Somanuals.com. All Manuals Search And Download.
1
PRODUCT SAFETY
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1
PRODUCT SAFETY
Safety Guidelines
WARNING: This device must be operated with the original power supply, part number FSP273-4F01.
CAUTION: The power supply outlet should be located near the 1080p monitor and should be easily
accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples
are listed below:
USA..................UL
Canada.............CSA
Germany..........VDE
Switzerland ..... SEV
Britain ............. BASE/BS
Japan ............... Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The specific power cord for this 1080p monitor is enclosed and has been selected according to the country
of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must
meet IEC-60320 requirements and should look like Figure A1 below:
Figure A1
Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For 1080p monitors that are placed on a desk or table, only SJT type cord sets may be used. For
1080p monitors placed directly on the floor, type SVT or SJT cord sets may be used. The cord set must be
selected according to the current rating for the monitor. Please consult the table below for the selection
criteria for power cords used in the United States and Canada.
Cord Type
Size of Conductors in Cord Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
SVT
FCC Compliance Statement
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may
cause harmful interference to radio communications if not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or video reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the 1080p monitor and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the Westinghouse Service Center or an experienced technician for assistance.
FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a
shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by
Westinghouse Digital will void the user's authority to operate this device.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
PRODUCT SAFETY
Product Safety Instructions
Follow and obey all warnings and instructions marked on the 1080p Monitor. For your
safety, please read all the safety and operating instructions before you operate the 1080p
Monitor. Keep this user’s manual for future reference.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to a void injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Other Notices
• Avoid exposing the 1080p monitor to direct sunlight or high temperatures.
• Avoid exposing the monitor to moisture or high humidity
• Do not attempt repairs yourself. Your warranty does not cover repairs or attempted
repairs by anyone not authorized by the manufacturer
• If your 1080p monitor will not be used for a long period of time, unplug it and
remove the batteries from the remote control
• Only use attachments/accessories specified by the manufacturer.
• Avoid touching the screen. Skin oils are difficult to remove.
• Never remove the rear cover. Your 1080p monitor contains high-voltage parts. You
may be seriously injured if you touch them.
• Always handle your LCD display with care when moving it.
• If the monitor emits smoke, abnormal noise, or a strange odor, immediately turn it
off and contact the Westinghouse Service Center.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INSTALLATION
Package Contents
Your product package includes:
• 37” Westinghouse LCD 1080p Monitor
• Remote Control (with batteries)
• Power Cord
• User’s Manual
• Quick Connect Guide
• Warranty Card
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INSTALLATION
Front View of the 1080p Monitor
Use the buttons on the right side of the 1080p Monitor or the buttons on the remote control
to display the On Screen Display (OSD) menu and adjust the options. The OSD controls
are defined in “OSD Functions” on page 16.
Power Indicator
“IR” Receiver
Speakers
Rear View of the 1080p Monitor
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INSTALLATION
Side View of the 1080p Monitor
1. Menu
Turn OSD Menu On or Off
Increase/Decrease sound volume or
adjust a highlighted control while in the
OSD Menu.
2. Volume + / -
3. T/S
Highlight a control while in the OSD
Menu.
( OSD Selection)
Select active video input or choose a
selection while in the OSD menu.
4. Input
5. Power Button
Turn Power On or Off
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INSTALLATION
SIDE CONNECTORS
2
1. HDMI
Connect to an external HDMI device such as a cable/satellite
receiver or DVD player.
2. DVI2 (HDCP) / Audio2 (Left / Right)
Connect to an external DVI-HDCP device such as a DVD,
cable/satellite receiver, or computer.
3
4
3. S-Video
Connect to an external video device such as a VCR.
5
6
4. AV Video
Connect the composite video to an external video device
such as a VCR.
7
8
5. S-Video & AV Audio (Left / Right)
Connect an external audio source to this jack.
connection supports either S-Video or AV input.
This
6. Audio Out (Left / Right)
Connect this output to an external audio amplifier.
9
7. Service Port
For Factory Use only.
8. VGA
10
Using a 15-pin VGA cable, connect to a computer
9. VGA Audio-In
Using a 3.5mm mini-jack cable, connect to the Audio out
(Green) on a computer.
10. DVI1 (HDCP) / Audio1 (Left / Right)
Connect to an external DVI-HDCP device such as a DVD,
cable/satellite receiver, or computer
11
12
11. YPbPr1 / Audio1 (Left / Right)
Connect the component video to an external video device
such as a DVD player or gaming system.
12. YPbPr2 / Audio2 (Left / Right)
13
Connect the component video to an external video device
such as a DVD player or gaming system.
13. AC-IN (Power)
Connect the power cord from AC-IN to a power source.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INSTALLATION
Remote Control
Use the Remote Control to adjust your Westinghouse 1080p Monitor.
1. POWER:
Switch the power on/off
2. MUTE:
Turn the sound on/off
3. PIP:
Display Picture-In-Picture
4. SWAP:
23. DVI:
Switch to DVI1/DVI2 source
24. Video:
Switch directly to Video source
25. S-Video:
Switch directly to S-Video source
Switch PIP between main and sub-screen
pictures
5. BACKLIGHT:
Shortcut to backlight adjustment
6. SLEEP:
Set sleep timer
7. FAVORITE:
For use with Westinghouse HDTVs only.
8. OSD SUB-MENU SELECTION:
Select OSD sub-menu option directly by
number
2
5
7
3
4
6
9. VOL - / +:
Volume Up/Down adjustment
10. INPUT:
Scroll input source list
11. CH/SOURCET / S:
Source selection up/down
12.SCALING:
8
10
11
Set screen to STANDARD or FILL
13.MENU:
9
Turn OSD Menu on/off
14.EXIT:
Exit the OSD Menu
15.W / X:
12
13
14
16
17
19
21
OSD Menu control; adjust settings
16.T / S:
Navigate within OSD Menu
17. ENTER:
To choose a selection
18. EPG:
For use with Westinghouse HDTVs only.
19. INFO:
Display main/sub-screen picture source
20. PC:
Switch directly to PC source
21. HDMI:
15
18
20
23
22
24
25
Switch directly to HDMI source
22. YPbPr:
Switch to YPbPr1/YPrPr2 source
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INSTALLATION
Installation
1. Insert Remote Control Batteries
1) Remove the battery cover.
2) Insert the batteries corresponding to the (+) and (−) marks on the battery
compartment.
3) Re-attach the battery cover.
CAUTION:
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage, which may pose a
fire risk or lead to personal injury.
• Insert batteries according to (+) and (−) markings. Inserting the batteries incorrectly may
result in cracking or leakage, which may pose a fire risk or lead to personal injury.
• Dispose of used batteries in accordance with local laws and regulations.
• Keep batteries away from children and pets.
• When the remote control will not be used for an extended period, remove the batteries.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INSTALLATION
2. Connect the 1080p Monitor to a computer
Connect a VGA or DVI cable and an audio cable to the back of the 1080p Monitor.
IMPORTANT: Before you begin, make sure all devices are turned off.
VGA CONNECTION: Connect an analog VGA cable from your computer VGA OUT
port to the 1080p Monitor VGA IN port. Connect a stereo mini cable from the
computer’s AUDIO OUT port to the VGA AUDIO IN port on the 1080p Monitor.
DVI CONNECTION: Connect a Digital DVI cable from your computer to the 1080p
Monitor DVI port. Using a 3.5mm mini cable to RCA Red/White (Left/Right) audio
converter cable, connect the 3.5mm cable plug into the computer’s AUDIO OUT port
and the RCA Red/White cable plug into the DVI AUDIO IN port on the 1080p Monitor.
3. Connect the 1080p Monitor to AV Devices
Connect one or all of the following compatible devices into the back of the 1080p
Monitor.
4. Connect power cable and power on the 1080p Monitor
Connect the power cord to the back of the 1080p Monitor then to a properly grounded
AC outlet and press the Power button to turn on the monitor.
NOTE: The monitor will take a few seconds to power up.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2
INSTALLATION
5. Turn on your computer
The 1080p Monitor will auto adjust to the resolution of the computer.
For the best picture quality, set the PC timing mode to 1920 x 1080 at 60Hz, then turn
off and reboot the computer. Refer to your computer’s graphic card user guide for
questions on how to set this timing mode.
6. Turn on the cable box or satellite receiver
If using a DVI or HDMI connection, the cable box or satellite receiver will need to be
restarted to complete HDCP authentication to view the picture.
7. Select an input source for the 1080p Monitor using the OSD menu or
remote control
To display the change the input source, press the Input button on the right side of the
1080p Monitor or the Input key on the remote control.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3
OSD FUNCTION
On-Screen Display (OSD) Function
To display the OSD main menu, press the Menu button on the right side of the 1080p
Monitor or the MENU key on the remote control. Use the ▲/▼ arrow keys to scroll up and
down the OSD main menu. Press the 4 arrow key to select the desired OSD sub-menu.
Main Menu
Using the main menu, you can adjust the Picture, PC, Audio, PIP, and General Setting
parameters. To select a sub-menu option, use the ▲/▼arrow keys on the right side of the
1080p monitor or on the remote control. Then use the 3/4arrow keys to adjust the
sub-menu setting. Finally, press the Menu button on the side of the 1080p monitor or the
Exit button on the remote control to exit the OSD menu.
OSD Main Menu
OSD Sub-Menu
Help Menu
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3
OSD FUNCTION
Picture
Function Name
Function
1. Brightness
2. Contrast
3. Saturation
4. Hue
Adjust the black level of the display.
Adjust the white level of the display.
Adjust the intensity of the colors.
Adjust the color towards either red or green.
Color temperature adjustment (Warm, Normal, Cool)
Adjust the clarity of the picture.
5. Color Temp
6. Sharpness
Set display to “STANDARD” or “FILL”
Adjusts the ratio between the width of the picture and the height
of the picture. A 16:9 picture will be displayed in its original
format.
7. Aspect Ratio
• Standard – conventional format used for viewing 4:3
programs in their normal format.
• Fill – format that horizontally stretches 4:3 pictures to the
edge of the screen (some programs will be broadcasted
with black or gray bars on the top and bottom or sides of
the picture).
Adjust the intensity of the lamp that illuminates the 1080p
monitor.
Reset the video settings to the factory default.
8. Backlight
9. Reset
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3
OSD FUNCTION
PC Parameters (VGA Only)
Function Name
Function
Automatically re-centers the image to the middle of the screen
by synchronizing both vertical and horizontal refresh rate and
resolution.
1. Auto Adjust
2. Clock
Clock adjustment
3. Phase
4. Position
Adjust the Phase control to eliminate horizontal streaking.
Adjust the horizontal and vertical position of the screen image.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3
OSD FUNCTION
Audio
Function Name
Function
1. Volume
2. Bass
Volume adjustment
Bass adjustment
3. Treble
4. Balance
5. Mute
Treble adjustment
Balance adjustment
Turn audio On or Off
6. Speaker
7. Reset
Select internal or external speakers
Reset audio settings
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3
OSD FUNCTION
Picture-in-Picture
Function Name
Function
Select display options:
Off, PIP, PBP, POP
1. Display Mode
Select main screen source:
VGA, HDMI, DVI1, DVI2, AV, S-Video, YPbPr1, YPbPr2
Select PIP sub-screen source:
VGA, HDMI, DVI1, DVI2, AV, S-Video, YPbPr1, YPbPr2
2. Main Source
3. PIP Source
4. Swap
Swap main screen and sub-screen source
5. PIP Position
Sub-screen display horizontal/vertical position adjustment
Adjust sub-screen display size:
Small, Medium, Large
6. PIP Size
Select main screen or sub-screen audio source:
Main, Sub
7. Audio Selection
The table below shows the functional combinations for PIP and SWAP (O – PIP and Swap
are functional).
INPUT/ PIP SOURCE CHART
Sub VGA
AV
S-Video YPbPr1
YPbPr2
DVI-1
DVI-2
HDMI
Main
AV
O
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
S-Video
YPbPr1
YPbPr2
VGA
X
X
X
O
O
O
O
O
O
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
X
O
X
X
O
X
HDMI
DVI-1
DVI-2
O
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3
OSD FUNCTION
General Settings
Function Name
Function
1. Menu Position
OSD Menu horizontal/vertical position adjustment
Set the amount of time before the OSD disappears.
• 10 seconds
2. Menu Timeout
• 30 seconds
• 60 seconds
Select the OSD language:
English, French, Spanish
3. Menu Language
Set the monitor to turn off after a specified amount of time:
Off, 30 minutes, 60 minutes, 120 minutes
4. Sleep Timer
NOTE: The 1080p monitor will take a few seconds to turn on
from sleep mode.
5. OSD Transparency Adjust the level of transparency of the OSD.
Power saving mode. Backlight will turn off automatically after
“No Signal” is detected for 1, 5 or 10 minutes.
7 System Information Displays the system information
6. DPMS
8. LED
Turns the LED power indicator On or Off
Resets all OSD menu settings of the 1080p monitor back to the
factory default values
9. Factory Reset
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4
APPENDIX
Troubleshooting
No Power
• Make sure the power cord is securely connected to the AC In jack on the back of
the 1080p monitor.
• Make sure the AC power cord is securely connected to the AC socket.
• Plug another electrical device (such as a radio) to the power outlet to verify that the
outlet is supplying the proper voltage.
Power is suddenly turned off
• Check if Sleep Timer is set. If so, turn it off.
Remote Control Does Not Work
• Press only one button at a time.
• Make sure the batteries are inserted correctly.
• Replace the batteries with new ones, if necessary.
Remote Control Code Not Found in a “Universal” Remote
• Purchase a separate “learning” remote control.
No Picture
• Check the video connection for the source input.
• Make sure the video cable connected to the 1080p monitor is tightly secured to the
video output port on the back of the computer. If the other end of the video cable
is not attached properly to the 1080p monitor, secure it tightly.
• Adjust the brightness and contrast level.
• If you are using a Macintosh computer older than G3, you need a Macintosh
adapter.
No Picture or “No Input Signal” (VGA Source)
• Check the VGA cable connection.
• Lower the video resolution on the computer and try plugging in the cable again.
Picture is cut off/with sidebar screen.
• Use Auto Adjust.
• Make sure the aspect ratio is set correctly.
Wrong or Abnormal Colors
• If any colors (red, green, or blue) are missing, check the video cable to make sure it
is connected securely. Loose or broken pins in the cable connector could cause an
improper connection.
• Connect the 1080p monitor to another computer.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4
APPENDIX
Troubleshooting (cont’d)
AUDIO Interconnection Issues
• Remember that the S-Video and Composite AV input share the same audio source.
No Sound
• Check the audio connection.
• Press MUTE on the remote control, so that MUTE disappears from the screen.
• Press the Volume + (Up) key on the remote control.
.
How Can I Find More Help?
• Contact Westinghouse Customer Service at (866) 287-5555 or write us at
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4
APPENDIX
Cleaning the 1080p Monitor
•
•
MAKE SURE THE 1080p MONITOR IS TURNED OFF
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner
onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-
abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Disclaimer
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on
the 1080p monitor screen or case. Some chemical cleaners have been reported to damage the
screen and or 1080p monitor case. Westinghouse Digital will not be liable for damage resulting
from use of any ammonia or alcohol-based cleaners.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
4
APPENDIX
Specifications
Model Name
LVM-37w3
37" TFT (Thin Film Transistor), Active Matrix LCD, 1920*1080 vertical
stripe
Panel
Type
Color
Anti-glare coating
Viewing Angles
Input Signal
176° (H) / 176° (V) (typ.)
Video/Audio
RGB Analog * 1 (75 ohms, 0.7 Vp-p)/Mini-Stereo *1
- H/V separated (TTL) for PC
HDMI-HDCP * 1
DVI-D * 2 (HDCP support) / RCA (L/R) * 2
- fh: 30-80 kHz, fv: 50-75 Hz NTSC
Component Video * 2 / RCA (L/R) Stereo * 2
Composite * 1 / S–Video * 1 / RCA (L/R) stereo * 1 (shared)
RCA (L/R)
Output Signal
Compatibility
PC Compatible
Audio
480i, 480P, 720P, 1080i, 1080p
Recommended 1920 x 1080P/I @ 60Hz
Supported
1280 x 1024 @ 60 Hz
720 x 400 @ 70 Hz
1280 x 768 @ 60Hz
1280 x 720 @ 60 Hz
1024 x 768 @ 60 Hz
800 x 600 @ 60 Hz
640 x 480 @ 60 Hz
Speaker Output
15W (x2 Channels)
Power
Voltage
~100-264 VAC, 50-60Hz, 3.5A, universal.
0 to +35° C (Hum < 90%)
-20 to +60o C (Hum < 35%)
Temperature
Operating
Storage
Operating
Storage
Physical
20 to 90% non-condensing
Humidity (Relative)
10 to 90% non-condensing.
37.3” (W) x 25.9” (H) x 8.17” (D)
Dimensions
Weight
Net / Gross
49.6 lbs / 60.6 lbs
Regulations
Power saving
Modes
UL/C-UL, FCC-B
On
<210W Typical (White LED)
<1.4W (LED Off)
Active Off
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in
permanent damage to the 1080p monitor.
Note: Product Specifications are subject to change without notice.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Westinghouse Digital Electronics
Santa Fe Springs, CA
SE-UM-3702-0601
Download from Www.Somanuals.com. All Manuals Search And Download.
|