Westinghouse Flat Panel Television TX 42F810G User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
TABLE OF CONTENTS  
AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN DIG-  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TABLE OF CONTENTS  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIGITAL TELEVISION TRANSITION NOTICE  
DIGITAL TELEVISION TRANSITION NOTICE  
This device contains a digital television tuner, so it should receive digital over the air  
TV programming, with a suitable antenna, after the end of full-power analog TV  
broadcasting in the United States on June 12, 2009. The nationwide switch to digital  
television broadcasting will be complete on June 12, 2009, but your local television  
stations may switch sooner. After the switch, analog-only television sets that receive  
TV programming through an antenna will need a converter box to continue to receive  
over-the-air TV. Watch your local stations to find out when they will turn off their  
analog signal and switch to digital-only broadcasting.  
For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see  
the NTIA at 1-888-DTV-2009.  
AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN  
DIGITAL  
Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá recibir  
una programación digital televisada por aire, con una antena adecuada, cuando se  
terminará la transmisión de alta potencia de la televisión analógica en los Estados  
Unidos el 12 de Junio de 2009. Ciertos receptores de televisión antiguos, si  
dependen de una antena de TV, necesitarán un conversor de TV para recibir por el  
aire una programación digital, pero seguirán funcionando como antes para otros  
usos (por ejemplo para ver emisoras de TV de baja potencia que todavía transmiten  
en analógico, para ver películas pregrabadas, o para utilizar sus videojuegos).  
Para obtener más información, llame FCC 1-888-CALL-FCC (1-888-225-5322) o  
de TV, y acerca de los cupones del gobierno que se pueden usar para comprarlos,  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
IMPORTANT INFORMATION  
IMPORTANT INFORMATION  
To reduce the risk of fire or electric shock:  
Do not expose this product to rain or moisture.  
Do not remove the rear cover. There are no user-serviceable parts inside.  
Refer all servicing requirements to qualified service personnel.  
The plug should be connected to a mains socket outlet with a protective  
earthing connection.  
Warnings  
To reduce the risk of fire or electric shock:  
Do not expose this product to rain or moisture.  
Do not remove the rear cover. There are no user-serviceable parts inside.  
Refer all servicing requirements to qualified service personnel.  
The plug should be connected to a mains socket outlet with a protective  
earthing connection.  
The lightning flash with arrowhead inside an equilateral  
triangle symbol is intended to alert the user to the presence  
of uninsulated dangerous voltage within the product's  
enclosure that may be of sufficient magnitude to constitute a  
risk of electric shock.  
The exclamation inside an equilateral triangle symbol is intended to  
alert the user to related operating and maintenance instructions in  
the user documentation accompanying the product.  
WARNING!  
This device must be operated with the original power supply.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
IMPORTANT INFORMATION  
CAUTION:  
The power supply outlet should be located near the LCD TV and should be easily  
accessible.  
Always use the appropriate AC cord that is certified for your specific country.  
Some examples are listed below:  
USA – UL  
Canada – CSA  
Japan – Electric Appliance Control Act  
NOTICES  
Important Notices Concerning Power Cord Selection  
The specific power cord for this LCD TV is enclosed and has been selected  
according to the country of destination. Use the enclosed power cord to prevent  
electric shock. Observe the following guidelines if it is necessary to replace the  
original cord set, or if there is no cord set enclosed. The female receptacle of the  
cord set must meet IEC-60320 requirements and should look like Figure A1 below:  
Figure A2  
Figure A1  
For the United States and Canada  
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2),  
UL-listed, and CSA-labeled. For LCD TVs that are to be placed on a desk or table,  
type SVT or SJT cord sets may be used. For LCD TVs that are to be placed directly  
on the floor, only SJT type cord sets may be used. The cord set must be selected  
according to the current rating for the LCD TV. Consult the table below for the  
selection criteria of power cords used in the United States and Canada.  
Cord Type Size of Conductor in Cord Maximum Unit Current Rating  
18 AWG  
16 AWG  
14 AWG  
18 AWG  
17 AWG  
10 Amps  
12 Amps  
12 Amps  
10 Amps  
12 Amps  
SJT  
SVT  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT INFORMATION  
FCC COMPLIANCE STATEMENT  
This equipment has been tested and complies with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy, and may cause  
harmful interference to radio communications if not installed and used in accordance  
with the instructions. However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the distance between the LCD TV and the receiver.  
Connect the LCD TV to an outlet on a circuit separate from to which the  
receiver is connected.  
if the interference persists even after performing the above measures,  
consult the Westinghouse Service Center or an experienced radio/TV  
technician for assistance.  
FCC Warning  
To assure continued FCC compliance, use a grounded power supply cord and the  
provided shielded video interface cable with bonded ferrite cores. If a BNC cable is  
used, use only a shielded BNC (5) cable. Also, any unauthorized changes or  
modifications not expressly approved by the manufacturer will void the user's  
authority to operate this device.  
"Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a  
trademark of Bitstream, Inc. Permission to use Bitstream Vera Fonts is granted by  
Bitstream, Inc. under the license terms of Bitstream Vera Fonts Copyright license:  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT INFORMATION  
IMPORTANT SAFETY INSTRUCTIONS  
Make sure to note and follow all warnings and instructions marked on the LCD TV.  
Observe the following safety instructions.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding  
type plug has two blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug does not fit into  
your outlet, consult an electrician for replacement of the obsolete outlet.  
Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
Only use attachments/accessories specified by the manufacturer.  
Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to avoid injury from tip-over.  
Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT INFORMATION  
Circuit Overload  
Do not overload wall outlets, extension cords, or power strips. This can result in a fire  
or electronic shock.  
Power Cord Protection  
Power supply cords should be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them. Periodically inspect the cords for  
damage. Install the LCD TV near a wall socket outlet where the power cord can be  
readily accessed.  
Ventilation  
The slots and openings on the cabinet are provided for necessary ventilation. To  
ensure reliable operation of the LCD TV and to protect it from overheating, these  
slots and openings must never be blocked or covered.  
Never cover the slots and openings with a cloth or other materials.  
Do not block the openings by placing the LCD TV on a bed, sofa,  
rug or other similar surface.  
Do not place the LCD TV in a built-in installation such as a  
bookcase or a rack unless proper ventilation is provided or the  
manufacturer’s instructions have been adhered to.  
Safety: Lamp Disposal  
Lamp(s) inside this product contain mercury and must be recycled or disposed of  
according to local, state or federal laws. For more information, contact the electronic  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
IMPORTANT INFORMATION  
WARNINGS AND PRECAUTIONS  
Do not orient the LCD TV towards direct sunlight to reduce glare.  
If the LCD TV will not be used for a long period of time, unplug the unit and  
remove the batteries from the remote control.  
Avoid touching the display screen by hand or any object.  
Never remove the rear cover. The LCD TV interior contains high-voltage  
parts. You may be seriously injured if you touch them.  
Always handle the LCD TV with caution when moving it.  
Do not install the LCD TV in airtight compartments, or in areas where it can  
be exposed to water or high temperature.  
Ensure that the area around the LCD TV is clean and free of moisture.  
Do not place anything on the LCD TV that can hinder heat dissipation.  
Do not place naked flame sources, such as lighted candles, on or near the  
LCD TV.  
Do not place anything on the LCD TV that can cause liquid to splash on it  
(e.g. flower vase).  
Do not place heavy objects on the LCD TV, audio/video cables, or power  
cord.  
If the LCD TV emits smoke, abnormal noise, or a strange odor, immediately  
turn it off and contact the Westinghouse Service Center by:  
Contacting the Westinghouse Customer Service at (800) 701-0680.  
E-mailing us at [email protected].  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IMPORTANT INFORMATION  
ANTENNA INSTALLATION SAFETY  
Outdoor Antenna Grounding  
If an outside antenna or cable system is connected to the LCD TV, be sure the  
antenna or cable system is grounded to prevent voltage surges and built-up static  
charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides  
information on proper grounding of the mast and supporting structure, grounding of  
the lead-in wire to an antenna discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
Antenna Grounding According to the National  
Electrical Code, ANSI/NFPA 70  
Antenna lead in wire  
Antenna discharge unit  
(NEC Section 810-20)  
Grounding clamps  
Grounding Conductors  
(NEC Section 810-21)  
Electric service  
equipment  
Grounding clamps  
Power service grounding  
electrode system  
(NEC Art 250 part H)  
NEC: National Electrical Code  
Lighting  
For added protection for the LCD TV during a lightning storm, or  
when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable  
system. DO NOT disconnect the antenna or the power cord during  
a heavy storm—lightning may strike while you are holding the  
cable cord, causing serious injury. Turn off the LCD TV and wait for  
the weather to improve.  
Power lines  
An outside antenna system should not be located in the vicinity of  
overhead power lines or other electric light or power circuits, or  
where it can fall into such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with them  
might be fatal.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
IMPORTANT INFORMATION  
CLEANING THE LCD TV  
Make sure the LCD TV is turned off and the power cord is  
disconnected from the power outlet.  
Never spray or pour any liquid directly onto the screen or the  
case.  
To clean the screen:  
1
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other  
particles.  
2
If it is still not clean, apply a small amount of non-ammonia, non-alcohol  
based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.  
To clean the case:  
1
2
Wipe the case with a soft, dry cloth.  
If it is still not clean, apply a small amount of non-ammonia, non-alcohol  
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then  
wipe the surface.  
Dolby-Digital Notice  
Manufactured under license from Dolby Laboratories. Dolby and the double-D  
symbol are registered trademarks of Dolby Laboratories.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
PACKAGE CONTENTS  
PACKAGE CONTENTS  
Remote Control (with 2x AAA batteries)  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
C
D
ENT  
Enter  
Input  
Vol  
Ch  
YPbPr1  
HDMI1  
HDMI2  
Video1  
Video2  
TV  
PC  
YPbPr2  
RMT-11  
Quick Connect Guide  
Warranty Card  
Warranty Brochure  
M4 x L10 mm Screw for Base  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CONTROL PANEL  
CONTROL PANEL  
1
2
Menu  
Volume  
Channel  
3
4
5
Source  
USB  
HDM  
I
R
Y
COMPON  
Pr  
Pb  
ENT  
L
L
R
SPD  
IF  
OU  
PC  
A
UDIO  
T
PC  
/
VG  
A
Power  
Description  
1. Menu  
Display the LCD TV setup screen.  
During playback, adjust the volume; in  
a menu screen, select an item.  
During TV viewing, adjust the channel;  
in a menu screen, select an item.  
Select the video input source; in a  
menu screen, execute a command.  
Toggles the power on and off.  
2. Volume +/-  
3. Channel +/-  
4. Source  
5. Power  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TERMINALS  
TERMINALS  
1
2
5
7
8
12  
USB  
COMPONENT  
HDMI  
Y
Pb  
Pr  
L
R
13  
14  
R
L
Y
Pb  
Pr  
L
L
R
R
SPDIF OUT  
PC AUDIO  
AV1  
AUDIO  
PC / VGA  
3
4
6
9
10  
11  
2
USB  
HDMI  
R
Y
COMPONE  
Pr  
Pb  
NT  
L
L
R
PC AUDIO SPDIF OU  
T
PC  
/
VG  
A
Function  
Connect the power cord from this outlet to a  
power source.  
1. AC in  
Connect to an external video device such as a  
DVD player, game system, cable, or satellite box.  
2. HDMI  
Using a 15-pin VGA cable, connect to a computer  
or other device with a VGA output.  
3. PC/VGA  
4. PC Audio in  
Connect to the audio out port of a computer.  
Connects to the AUDIO (R/L) input jacks on  
external AV equipment.  
5. AUDIO OUT-STEREO  
6. SPDIF (optical) audio Connect this output to an external digital audio  
out  
receiver.  
Connect an external video device with component  
output to these jacks.  
7. YPbPr input  
8. YPbPr audio input  
9. Composite video input  
10. AV audio input  
11. TV tuner  
Connect an external audio source.  
Connect to an external video device with an  
analog signal such as a VCR.  
Connect this input to an external audio source.  
Connect the LCD TV to an antenna or cable  
service.  
12. USB Service port  
For service only.  
13. Composite video  
input AV2  
Connect to an external video device with an  
analog signal such as a VCR.  
14. AV2 Audio input  
Connect this input to an external audio source.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
REMOTE CONTROL  
REMOTE CONTROL  
Description  
Mute the sound. Press it again to  
toggle the sound back on.  
1. Mute  
Toggle the TV power on and off.  
Adjust the LCD screen backlight.  
2. Power  
3. Backlight  
4. MTS  
Not supported.  
1
2
Toggle the closed caption display on  
and off.  
Set the sleep timer for the LCD TV to  
turn off automatically.  
Key in the channel number.  
Switch to the favorite channels. See  
page 23 for details on how to save a  
new favorite channel.  
5. CC  
3
5
4
6
Z
C.C.  
Z
Z
MTS  
Favorite  
6. Sleep zZz  
A
B
C
D
7. Channel keys  
8
7
8. Favorite  
ENT  
9
9. Enter ENT  
Execute a channel entry.  
10  
11  
Display the LCD TV setup screen.  
10. Menu  
12  
13  
Enter  
Switch to a previously bookmarked  
channel.  
Navigate through the on-screen  
menu.  
11. Return  
14  
17  
15  
16  
12. Arrow keys  
Input  
Vol  
Ch  
18  
Execute a command.  
Not supported.  
13. Enter  
14. G  
19  
21  
23  
YPbPr1  
HDMI1  
HDMI2  
Video1  
Video2  
TV  
PC  
20  
22  
YPbPr2  
Display the input source or channel  
information as well as the system  
date and time.  
24  
26  
25  
27  
15. Info  
RMT-11  
16. Input  
17. Vol +/-  
Select the video input source.  
Ajust the system volume.  
Change the current TV channel.  
18. Ch  
/
Select the video display format.  
Enable YPbPr as the input source.  
Enable TV or HDTV as the input  
source.  
19. Aspect ratio  
20. YPbPr1  
21. TV  
22. HDMI1  
23. Video1  
24. YPbPR2  
25. PC  
Enable HDMI1 as the input source.  
Enable Video1 or video2 as input.  
Not supported.  
Enable VGA as the input source.  
Enable HDMI2 as the input source  
Enable S-Video as the input source.  
26. HDMI2  
27. Video2  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
REMOTE CONTROL OPERATION  
REMOTE CONTROL OPERATION  
INSTALLING THE REMOTE CONTROL BATTERIES  
CAUTIONS:  
Only use AAA batteries.  
Do not mix new and old batteries. This may result in cracking or leakage,  
which may pose a fire risk or lead to personal injury.  
Insert batteries according to the (+) and (-) markings. Inserting the  
batteries incorrectly may result in cracking or leakage, which may pose a  
risk of fire or lead to physical injury.  
Dispose of used batteries in accordance with local laws and regulations.  
Keep batteries away from children and pets.  
When the remote control will not to be used for an extended period,  
remove the batteries.  
1
Remove the battery cover.  
2
Insert the batteries. Make sure the (+) and (–) marks on the batteries match  
those inside the compartment.  
3
Re-attach the battery cover.  
REMOTE CONTROL TRANSMISSION RANGE  
Transmission range depends upon the reception angle. The range of coverage is 20°  
horizontal/vertical at a distance of 10 feet from the LCD TV.  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
LCD TV BASE  
LCD TV BASE  
CAUTION:  
The LCD TV unit may be too heavy for one person to lift. If this is the case,  
make sure to ask for assistance in handling the LCD TV to prevent  
physical injury and/or damage to the unit.  
INSTALLING THE LCD TV BASE  
1
2
3
4
5
6
7
8
9
Open the LCD TV carton box.  
Remove the LCD TV base.  
Remove the plastic bag.  
Remove the two top carton stabilizers from the LCD TV.  
Remove the protective plastic covering the LCD TV.  
Grasp the two sides of the LCD TV and then pull it out of the carton box.  
Remove the two bottom carton stabilizers from the LCD TV.  
Lay the LCD TV on a clear, flat, and stable surface.  
Align the base to the bottom side of the LCD TV and use one M4 x L10 mm  
screw to secure it.  
U
S
B
2
U
S
AV  
B
2
AV  
10 Carefully orient the LCD TV in an upright position.  
USB  
HDM  
I
R
Y
COMP  
ONE  
Pb  
NT  
Pr  
L
L
U
R
AV  
SP  
DIF  
PC  
A
UDIO  
OU  
T
PC  
/
VG  
A
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
LCD TV BASE  
REMOVING THE LCD TV BASE  
If you intend to repack the LCD TV unit (for shipping or storage) or you want to  
change the installation to a wall mount option, you must first remove the LCD TV  
base.  
1
2
3
4
Turn off the LCD TV and all connected devices.  
Disconnect the power cord from the LCD TV.  
Disconnect all signal cables from the I/O port terminals.  
Lay the LCD TV on a clear, flat, and stable surface.  
USB  
HD  
MI  
R
Y
COM  
PO  
NE  
NT  
Pb  
Pr  
L
U
L
B
R
2
SP  
PC  
DIF  
AUD  
IO  
O
UT  
PC  
/
V
GA  
5
6
Remove the screw securing the base to the LCD TV.  
Detach the base from LCD TV.  
U
S
B
2
AV  
U
S
B
2
AV  
7
Pack the screws you removed in step 5 together with the LCD TV base for  
future reassembly.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ANTENNA CONNECTION  
ANTENNA CONNECTION  
OUTDOOR ANTENNA CONNECTION  
Cable TV lead in  
VHF, UHF or VHF/UHF  
combination antenna  
75 ohm coaxial cable (round)  
300-75 ohm ADAPTER  
RF IN  
300 ohm twin-lead (flat)  
(Not supplied)  
Separate VHF/UHF Antenna  
VHF Antenna UHF Antenna  
Home Antenna  
terminal (75 ohm)  
300 ohm twin-lead  
COMBINER  
(Not supplied)  
300 ohm twin-lead  
IN OUT  
75 ohm coaxial cable  
NOTE:  
The F-type connector should be finger-tightened only.  
When connecting the RF cable to the LCD TV, do not  
tighten F-type connector with any tool. If tools are  
used, it may cause damage to the LCD TV (e.g.  
breaking of internal circuit).  
CABLE TV (CTV/DTV) CONNECTION  
The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O  
panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit,  
screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium  
pay channels. Since the signals of these channels are scrambled, a cable TV  
converter/descrambler is usually provided to the subscriber by the cable TV  
company. This converter/descrambler is necessary for normal viewing of the  
scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels  
is used. If a channel is unknown, consult your cable TV company.) For more specific  
instructions on installing cable TV, consult your cable TV company. One possible  
method of utilizing the converter/descrambler provided by your cable TV company is  
explained below.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
EXTERNAL DEVICE CONNECTIONS  
A position on the RF switch (not supplied) – You can view all unscrambled  
channels by using the TV's channel keys.  
B position on the RF switch (not supplied) – You can view the scrambled  
channels via the converter/descrambler by using the converter's channel  
keys.  
RF switch (not supplied)  
Two-set  
A
signal  
OUT  
IN  
B
Cable TV line  
splitter  
(Not  
supplied)  
Cable TV  
converter/descrambler  
(Not supplied)  
EXTERNAL DEVICE CONNECTIONS  
IMPORTANT:  
Turn off the LCD TV first before connecting an external device to prevent  
any possible damage or physical injury.  
For more information about external device connections, see the operation  
manual of the external device you wish to connect to the LCD TV.  
Make sure that the correct cables are connected to each terminal.  
Improper cable connections may cause damage to the LCD TV.  
You can enjoy picture and sound by connecting various audio-video devices to the  
terminals located on the rear and side I/O panels of the LCD TV.  
TV cable input – You can use a commercially available audio/video cable.  
Component (YPbPr) input – Picture can be displayed only when a 480i,  
480P, 720P or 1080i signal is received.  
HDMI input – Picture can be displayed only when a 640 x 480, 480P, 720P  
or 1080i signal is received. When you connect to the HDMI terminal with a  
DVI-HDMI conversion cable, there is a possibility that the picture may not  
display correctly.  
Audio output – You can output audio signals from the LCD TV set through  
the analog audio out and SPDIF terminals.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EXTERNAL DEVICE CONNECTIONS  
The following diagram shows the external device connections.  
HDMI  
DVI-HDMI  
HDMI  
conversion cable  
DVI  
DVD Player  
Audio amplifier  
HDMI  
* If your external device has a  
component terminal, COMPONENT  
connection is recommended  
DVD Player  
(high-quality pictures can be viewed)  
Audio output terminal  
AUDIO OUT  
(with DVI terminal)  
(with HDMI terminal)  
Cable system or antenna  
Audio Audio  
Pb  
Pr  
Y
Audio  
(L)  
Audio  
(R)  
(R)  
(L)  
Antenna cable  
Component  
cable  
Audio cable  
Audio cable  
USB  
COMPONENT  
HDMI  
Y
Pb  
Pr  
L
R
R
L
Y
Pb  
Pr  
L
R
R
SPDIF OUT  
PC AUDIO  
AV1  
L
AUDIO  
PC / VGA  
RGB  
cable  
3.5 mm  
stereo mini  
jack cable  
SPDIF cable  
Video  
Audio  
Video Audio Audio  
(L) (R)  
HDMI  
HDMI  
HDMI  
Home Video  
PC  
AUDIO OUT  
game system Camcorder  
VCR  
DVI-HDMI  
conversion cable  
Audio amplifier  
DVI  
DVD Player  
DVD Player  
DVD Player  
Digital TV turner  
(with DVI terminal)  
(with HDMI terminal)  
Audio output terminal  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER CONNECTION  
POWER CONNECTION  
CONNECTING AC POWER  
IMPORTANT:  
The LCD TV works on a 120 VAC, 60 Hz power input voltage ONLY. Turn  
off all connected devices before plugging in the power cord.  
Connect the power cord to the LCD TV then to a proper AC outlet.  
USB  
HD  
MI  
CO  
M
R
Y
PO  
Pr  
NE  
Pb  
NT  
L
L
R
SP  
PC  
DIF  
AU  
O
U
DIO  
T
PC  
/
V
GA  
INITIAL SETUP  
Press on the control panel or on the remote control to turn on the LCD TV. Select  
the desired language and select Yes to use the SetupWizard. The SetupWizard  
will guide you on how to set up the LCD TV’s operational settings.  
Menu  
Volume  
Channel  
Source  
Power  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
BASIC OPERATIONS  
BASIC OPERATIONS  
TURNING THE POWER ON AND OFF  
Turning on the power  
Press  
on the control panel or on the remote control to turn on the LCD TV.  
Turning off the power  
Press  
on the control panel or on the remote control to turn off the LCD TV.  
The LED behavior will depend on the enabled Power settings.  
Menu  
Turns from amber  
Description  
When LED Setting  
Volume  
to blue when power is set to ON.  
on and turns from  
Channel  
blue to amber when  
power off.  
Source  
Power  
Remains in blue.  
When LED Settings  
is set to OFF.  
Z
C.C.  
Z
Z
MTS  
Favorite  
A
B
NOTES:  
If you are not going to use the TV for a long time, be sure to disconnect the  
power cord from the wall outlet and remove the batteries from the remote  
control.  
In standby mode, a small amount of electricity is still consumed even when  
the power is turned off.  
ADJUSTING THE VOLUME  
Volume  
Mute  
Z
C.C.  
Z
Z
MTS  
Favorite  
Press Vol+ to increase the volume; press Vol-  
to decrease the volume.  
A
B
C
D
ENT  
Mute  
Enter  
Press  
to turn off the sound. Mute appears  
Input  
on the volume bar. Press again to turn on the  
sound.  
Vol  
Ch  
Volume  
YPbPr1  
YPbPr2  
HDMI1  
HDMI2  
Video1  
Video2  
TV  
PC  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
BASIC OPERATIONS  
CHANGING CHANNELS  
Referred to in the following instructions to change channels.  
Using the Ch  
/
Buttons  
Input  
Browse channels  
Vol  
Ch  
To browse through the available channels, press Ch  
/
on  
YPbPr1  
HDMI1  
Video1  
TV  
the remote control or on the control panel.  
Using the Channel Keys  
Favorite  
Selecting channel  
A
B
C
D
To change to a certain channel, key in the channel number using  
the channel keys and press ENT.  
Selecting digital channel  
ENT  
To select a digital channel, key in the digital channel number using  
the channel keys and the • key then press ENT.  
Using the Favorite Keys  
Z
C.C.  
Z
Z
MTS  
Selecting favorite channels  
Favorite  
A
B
C
D
To select a favorite channel, press the Favorite button (A, B, or C)  
corresponding to the preferred favorite channel.  
Saving a channel as a favorite  
ENT  
1
Display the channel you want to add as a favorite.  
2 Press and hold the Favorite channel key for 3 seconds you  
want to add the current channel to.  
3 The Channel Saved message appears to confirm the new  
favorite channel item.  
SELECTING THE INPUT SOURCE  
There are two ways to select the video input source.  
Using the Individual Input Keys  
TV, PC, Video, YPbPr, HDMI Keys  
YPbPr1  
HDMI1  
Video1  
TV  
YPbPr2  
HDMI2  
Video2  
PC  
Press any of the following remote control keys to change the input  
source: TV, PC, Video, YPbPr, or HDMI.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
BASIC OPERATIONS  
Using the Input Key  
Select source using Input Key  
Press Input  
2 A list of supported video sources is displayed.  
Input  
Vol  
Ch  
1
.
YPbPr1  
HDMI1  
Video1  
TV  
3 Press  
4 Press  
/
to select the preferred source.  
to switch to the selected input source.  
ADJUSTING THE DISPLAY FORMAT  
The input source can sometimes affect the way images are displayed on-screen.  
You can adjust the display format to view the image properly.  
Input  
Format Options  
Vol  
Ch  
YPbPr1  
HDMI1  
HDMI2  
Video1  
Video2  
TV  
PC  
Press  
repeatedly to toggle the display format. As you toggle  
YPbPr2  
each option on, the actual display will change accordingly. Options  
include:  
Standard: Picture is displayed in its original size.  
Fill: Picture is displayed to cover the entire screen.  
Overscan: Picture is scaled down to fit the display area.  
1:1 Mode: Matches the incoming resolution exactly to the  
pixels without any scaling.  
ADJUSTING THE LCD BACKLIGHT  
Different viewing conditions can affect the quality of the display. You can adjust the  
LCD backlight to suit the current viewing condition.  
Backlight options  
Z
C.C.  
Z
Z
MTS  
Favorite  
Press  
repeatedly to toggle the Backlight options: Bright  
A
Room, Medium Room, and Dark Room.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
SETUP MENUS  
SETUP MENUS  
SETUP MENU OPERATION  
Use the setup menus to configure the various operational settings of the LCD TV.  
Displaying the setup menu screen  
Press on the remote control or Menu on the control panel to display the setup  
menu screen.  
Navigating the setup menu screen  
Use the buttons on the remote control or on the control panel to navigate through  
the menu screens.  
Menu  
Volume  
Enter  
Channel  
COMPONENT  
HDMI  
Y
Pb  
Pr  
L
R
R
L
S
P
D
I
F
O
U
T
Y
Pb  
Pr  
L
L
R
R
P
C
A
U
D
I
O
AV1  
PC  
/
VGA  
AUDIO  
Source  
Power  
Action  
Remote Control  
Control Panel  
MENU  
Display or close the menu bar.  
Select and display a primary  
menu.  
Volume +/- then  
/
/
then  
then  
Source  
Adjust sub-menu options.  
Select and display a sub-menu.  
Channel +/- then  
Select a menu or a sub-menu  
option.  
Source  
Return to the primary menu tab  
from a sub-menu screen.  
Menu  
Return to the previous screen.  
Apply the selected menu setting or  
cycle though available menu  
options.  
Source  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting Contrast  
1
Use the  
/
keys to select Contrast and press  
keys on the remote control to adjust the option level.  
to save and exit the screen.  
.
2 Press the  
3 Press  
/
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The following options are available:  
Showroom: Increased color and sharpness for a vibrant picture display.  
Movie: Images are displayed as accurately near to its original recording  
condition.  
Game: Increased brightness and response time level for enjoying video  
games.  
Sports: High contrast display for clear-cut images ideal for viewing sports  
events.  
Custom: Customize your own settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
There are three available settings:  
Warm: Pictures appear more reddish.  
Neutral: Pictures appear more white.  
Cool: Pictures appear with a bluish tint.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE:  
The configuration settings for the Picture sub-menus will only be applied to the  
current input source.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
AUDIO  
Use the Audio sub-menus to configure the audio quality. These settings apply to the  
LCD TV speakers only. Any connected audio devices are not affected.  
Press  
on the remote control or Menu on the control panel to display the setup  
menu screen then select Audio to display the Audio sub-menu. The following  
options are available: Bass, Treble, Balance, TV Speaker, Audio Presets, and Reset.  
Bass  
Use Bass to calibrate low-pitched sounds.  
Bass  
Adjusting Bass  
1
Use the  
/
keys to select Bass and press  
keys on the remote control to adjust the option level.  
to save and exit the screen.  
.
2 Press the  
3 Press  
/
Treble  
Use Treble to calibrate high-pitched sounds.  
Treble  
Adjusting Treble  
1
Use the  
/
keys to select Treble and press  
keys on the remote control to adjust the option level.  
to save and exit the screen.  
.
2 Press the  
3 Press  
/
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUP MENUS  
Balance  
Use Balance to adjust the sound balance between the L/R speakers.  
Balance  
Adjusting Balance  
1
Use the  
/
keys to select Balance and press  
keys on the remote control to adjust the option level.  
to save and exit the screen.  
.
2 Press the  
3 Press  
/
TV Speaker  
Use this sub-menu to toggle the LCD TV speakers on and off.  
TV Speaker  
ON  
OFF  
Adjusting TV Speaker  
Use the keys to select TV Speaker and press  
keys on the remote control to select ON or OFF.  
to save and exit the screen.  
1
/
.
2 Press the  
3 Press  
/
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Audio Preset  
Use this sub-menu to select one of four preset audio options optimized for different  
sounding conditions.  
Audio Presets  
Rock  
POP  
Classical  
Flat  
Custom  
The following options are available:  
Rock: Sets the equalizer to the Rock mode.  
Pop: Sets the equalizer to the Pop mode.  
Classical: Sets the equalizer to the Classical mode.  
Flat: Sets the equalizer to the Flat mode.  
Custom: Customizes your own settings.  
Adjusting Audio Preset  
1
Use the  
/
keys to select Audio Preset and press  
.
2 Press the  
/
keys on the remote control to select the desired option.  
3 Press  
to save and exit the screen.  
Reset  
Select Yes on this sub-menu to reset all audio-related settings.  
Reset  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
VIEW MODE  
Use the View Mode sub-menu to select the display's aspect ratio.  
Press  
on the remote control or Menu on the control panel to display the setup  
menu screen then select View Mode to display the View Mode sub-menu.  
View Mode  
The following options are available:  
Standard  
Picture is displayed in its original size.  
FILL  
1 : 1  
Standard  
Fill  
Picture is displayed to cover the entire screen.  
1 : 1  
FILL  
Fill  
Overscan  
Picture is scaled down to fit the display area.  
FILL  
1 : 1  
Overscan  
1:1 Mode  
Picture is displayed to cover the entire screen.  
FILL  
1 : 1  
1:1 Mode  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUP MENUS  
Adjusting View Mode  
Press the  
2 Press or  
1
/
keys on the remote control to select the desired option.  
to save and exit the screen.  
VIEW MODE (VGA)  
Select VGA as your input source and use the View Mode sub-menu to adjust the  
display in VGA mode.  
Press  
on the remote control or Menu on the control panel to display the setup  
menu screen then select View Mode to display the View Mode sub-menu.  
The following options are available:  
Aspect Ratio  
Use this sub-menu to select the display's aspect ratio in the following options:  
Standard: Picture is displayed in its original size.  
Fill: Picture is displayed to cover the entire screen.  
1:1 Mode: Matches the incoming resolution exactly to the pixels without any  
scaling.  
A
16:9  
Aspect Ratio  
Standard  
Fill  
1:1 Mode  
H. Position  
Use this sub-menu to adjust the display’s horizontal position.  
16:9  
A
H. Position  
V. Position  
Use this sub-menu to adjust the display’s vertical position.  
16:9  
A
V. Position  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUP MENUS  
Fine Tune  
Use this sub-menu to fine tune the display.  
16:9  
A
Fine Tune  
Auto Sync  
Use this sub-menu to synchronize the display automatically.  
16:9  
A
Auto Sync  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
CHANNELS  
Use the Channels sub-menus to manage the channel list, language sound, and to  
scan for available TV channels in your area.  
Press  
on the remote control or Menu on the control panel to display the setup  
menu screen then select Channels to display the Channels sub-menu. The following  
options are available: Skip List, Channel Edit, MTS, Audio Language, Auto Search,  
and Manual Add.  
Skip List  
Use Skip List to select the channels you want to skip.  
Channel Skip List  
Clear List  
26  
27  
28  
30  
33  
34  
35  
36  
37  
38  
:Select  
Enter: Confirm  
Menu: Exit  
Adding Channels to Skip List  
1
Use the  
/
keys to select Skip List and press  
. The Channel Skip  
List screen appears.  
2 Use the  
3 Press  
/
keys to select the desired channel.  
repeatedly to check (add to the Skip list) or uncheck (clear to  
the Skip list) the channels.  
4 Repeat steps 2 and 3 to add more channels.  
5 Press  
to save and exit the screen.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUP MENUS  
Channel Edit  
Use Channel Edit to assign a name to a channel.  
Channel Name Edit  
26  
27  
28  
30  
33  
34  
35  
36  
37  
38  
:Select  
Enter: Confirm  
Menu: Exit  
Editing Channel Names  
1
Use the  
/
keys to select Channel Edit and press  
. The Channel  
Name Edit screen appears.  
2 Use the keys to select the desired channel and press  
/
to open  
the Edit Name screen.  
3 Use the  
/
/
/
keys to move the cursor to the character you want  
button to enter characters.  
to enter and press the  
4 Select Accept when finished.  
5 Repeat steps 2, 3, and 4 to add more channels.  
6 Press  
to save and exit the screen.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
MTS  
Use MTS to select multichannel television sound.  
en  
MTS  
Mono  
Stereo  
SAP  
The following options are available:  
Mono: Allows mono output (useful when stereo is noisy or inconsistent).  
Stereo: Allows stereo sound for superior TV viewing experience.  
SAP: Allows second audio program from the speakers while watching a  
scene in the original program.  
Adjusting MTS  
1
Use the  
/
keys to select MTS and press  
keys on the remote control to select the desired option.  
to save and exit the screen.  
.
2 Press the  
3 Press  
/
Audio Language  
Use this sub-menu to select the audio language to English, French, or Spanish.  
en  
Audio Language  
English  
French  
Spanish  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Adjusting Audio Language  
1
Use the  
/
keys to select Audio Language and press  
.
2 Press the  
Spanish.  
/
keys on the remote control to select English, French or  
3 Press  
to save and exit the screen.  
Auto Search  
Select Auto Search and press  
and Auto Search automatically creates a list of  
receivable channels for the source you select:  
Cable: Choose this setting if you are receiving TV channels with a CATV  
(cable TV)  
AIR: Choose this setting if you are receiving TV channels with an antenna  
(over the air)  
Manual Add  
Use Manual Add to add channels manually.  
Channel Add  
_
Enter  
:Select  
Enter: Confirm  
Menu: Exit  
Adding Channels Manually  
1
Use the  
/
keys to select Manual Add and press  
. The Channel Add  
screen appears.  
2 Use the Channel keys on the remote control to enter the channel number  
and select Enter. Wait a few moment for the TV to search the channel.  
3 When the channel is found, you can select Add to add to channel.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
SETTINGS  
Use the Settings sub-menus to configure the LCD TV operational setup and view the  
current firmware version.  
Press  
on the remote control or Menu on the control panel to display the setup  
menu screen then select Settings to display the Settings sub-menu. The following  
options are available: Date and Time, Closed Captions, Parental Control, OSD  
Timeout, OSD Language, Power settings, and Reset All.  
Date and Time  
Use Date and Time to adjust the current date and time.  
Date and Time  
Date  
Day of Week  
Thursday  
JAN 1, 2009  
Time Zone  
Current Time  
10:54 AM  
Eastern (UTC-5)  
Adjust for Daylight Saving Time  
Auto Calibration  
:Select  
Enter: Confirm  
Menu: Exit  
Adjusting Auto Calibration  
1
Use the  
/
keys to select Date and Time and press  
.
2 Press  
repeatedly to check (enable) or uncheck (disable) Auto  
Calibration.  
3 Press  
to save and exit the screen. Enable this option to view the  
system’s current time; Date and Current time options are unavailable for  
adjustments when Auto Calibration is enabled.  
Adjusting Time Zone  
1
2
Use the  
Use the  
/
keys to select Date and Time and press  
keys to select Time Zone and press  
.
/
.
3 Use the  
/
keys to select the desired Time Zone: Samoa, Hawaii,  
Alaska, Pacific, Mountain, Central, Eastern, Atlantic, or  
Newfoundland.  
4 Press  
to save and exit the screen.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SETUP MENUS  
Adjusting Date and Time  
1
Use the  
/
keys to select Date and Time and press  
.
2 Use the  
/
/
keys to select Date or Current Time and press  
.
3 Use the  
4 Use the  
/
keys to select a date or time segment.  
keys to adjust the value.  
5 Press  
to save and exit the screen.  
Adjusting Daylight Saving  
1
Use the  
/
keys to select Date and Time and press  
.
2 Press  
repeatedly to check (enable) or uncheck (disable) Adjust for  
Daylight Saving Time.  
3 Press  
to save and exit the screen.  
Closed Captions  
Use Closed Captions to configure the settings for closed captioning in TV programs.  
Closed Captions  
Closed Captions  
Analog Type  
Digital Type  
ON  
CC1  
CS1  
Font  
Size  
As Broadcaster  
As Broadcaster  
As Broadcaster  
As Broadcaster  
Font Color  
Background Color  
:Select  
Enter: Confirm  
Menu: Exit  
The following options are available:  
Closed Captions: Can be set to ON (enable) or OFF (disable).  
Analog Type: Can be set to CC1,CC2, CC3, CC4, T1, T2, T3, or T4.  
Digital Type: Can be set to CS1, CS2, CS3, CS4, CS5, or CS6.  
Font: Can be set to As Broadcaster, Style 1, Style 2, Style 3, Style 4,  
Style 5, Style 6, or Style 7.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Size: Can be set to As Broadcaster, Small, Medium, or Large.  
Font Color: Can be set to As Broadcaster, Black, White, Green, Blue,  
Red, Cyan, Yellow, or Magenta.  
Background Color: Can be set to As Broadcaster, Black, White, Green,  
Blue, Red, Cyan, Yellow, or Magenta.  
Adjusting Closed Captions Settings  
1
Use the  
/
keys to select Closed Captions and press  
.
2 Use the  
3 Use the  
4 Press  
/
keys to select a desired Closed Captions option.  
keys to adjust the value.  
/
to save and exit the screen.  
Parental Control  
Use Parental Control to block channels and change password. You must enter a six-  
digit password to use the Parental Control. The factory password is 999999.  
Enter Password  
Enter: Confirm  
Menu: Exit  
After you enter the correct password, the Parental Control menu is shown. By  
default, only the Rating and Change Password submenu are displayed. To display  
the hidden submenu, set Rating to ON.  
The following options are available:  
Rating: Select ON/OFF to hide or display the hidden submenu.  
Block Unrated: Select ON/OFF to block/unlock all unrated programs.  
Adjusting Rating and Block Unrated  
1
Use the  
/
keys to select Rating or Block Unrated and press  
keys to select ON or OFF.  
.
2 Use the  
/
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
3 Press  
to save and exit the screen.  
TV Rating: Use this sub-menu to customize US TV Rating programs.  
TV- Y (TV Rating)  
Lock All  
UnLock All  
FV  
D
L
S
V
TV-Y  
TV-Y7 / FV  
TV-G  
TV-PG / V / S / L / D  
TV-14 / V / S / L / D  
TV-MA / V / S / L  
:Select  
Enter: Confirm  
Menu: Exit  
TV-Y  
TV-Y7  
TV-G  
Description  
Suitable for young children.  
May not be suitable for children under 7.  
Suitable for all audiences.  
Parental guidance suggested.  
Parental guidance suggested for children  
under 14.  
TV-PG  
TV-14  
Suitable for mature audiences only; may  
be unsuitable for children under 17.  
Fantasy violence, combative situations.  
Suggestive dialogue.  
TV-MA  
FV  
D
L
L Coarse language.  
S
Sexual situations.  
V
Violence.  
Adjusting TV Rating  
1
Use the  
/
keys to select TV Rating and press  
.
2 Use the  
/
/
/
keys to select the desired rating and press  
repeatedly to block or unblock. You can also select Lock All to block all or  
Unlock All to unblock all.  
3 Press  
to save and exit the screen.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
MPAA Rating: Use this sub-menu to select the ratings of allowable movies.  
USA - Movies  
G
PG  
PG-13  
R
NC-17  
X
:Select  
Enter: Confirm  
Menu: Exit  
Description  
Contains nothing most parents will consider offensive for even  
their youngest children to see or hear; suitable for young children.  
May contain some material parents might not like to expose to their  
young children-material that will clearly need to be examined or  
inquired about before children are allowed to view the film.  
May contain some scenes of drug use; use of one of the harsher  
sexually-derived words may be heard. May be inappropriate for  
preteens.  
May contain some adult material. Parents are urged to learn more  
about the film before letting their children view it.  
May contain explicit sex scenes, an accumulation of sexually-  
oriented language, and/or scenes of excessive violence. Suitable  
for adult audiences only. Rating does not signify that the film is  
obscene or pornographic.  
G
PG  
PG-13  
R
NC-17  
Contains extreme violence or explicit sex; suitable for adult  
audiences only.  
X
Adjusting MPAA Rating  
1
Use the keys to select MPAA Rating and press  
/
.
2 Use the  
/
/
/
keys to select the desired rating and press  
repeatedly to block or unblock.  
3 Press to save and exit the screen.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Canada English: Use this sub-menu to select the classification categories  
(based on Canadian ratings) of allowable TV programs  
and movies.  
en-C8 (Canada English Rating)  
E
C
C8+  
G
PG  
14+  
18+  
:Select  
Enter: Confirm  
Menu: Exit  
Description  
Suitable for viewing by children of all  
ages.  
C
Not suitable for children under 8 years of  
age.  
C8+  
G
PG  
Suitable for general audiences.  
Parental guidance advised.  
Suitable for people 14 years of age or  
older.  
Suitable for people 18 years of age or  
older.  
14+  
18+  
Adjusting Canada English Rating  
Use the keys to select Canada English and press  
1
/
.
2 Use the  
/
/
/
keys to select the desired rating and press  
repeatedly to block or unblock.  
3 Press  
to save and exit the screen.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Canada French: Use this sub-menu to select the ratings of allowable TV  
programs and movies. These ratings are based on the  
classification categories determined by La Régie du  
cinéma du Québec.  
fr-8+ (Canada French Rating)  
E
G
8 ans+  
13 ans+  
16 ans+  
18 ans+  
:Select  
Enter: Confirm  
Menu: Exit  
Description  
G
For general audiences.  
Not suitable for children under 8  
years of age.  
Not suitable for persons under 13  
years of age.  
Not suitable for persons under 16  
years of age.  
Not suitable for persons under 18  
years of age.  
8 ans +  
13 ans+  
16 ans+  
18 ans+  
Adjusting Canada French Rating  
Use the keys to select Canada French Rating and press  
1
/
.
2 Use the  
/
/
/
keys to select the desired rating and press  
repeatedly to block or unblock.  
3 Press  
to save and exit the screen.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Channel Block: Channel Block allows you to block channels.  
Channel Block  
Clear List  
Ch 24-0  
Ch 26-0  
Ch 27-0  
Ch 28-0  
Ch 29-0  
Ch 30-0  
Ch 33-0  
Ch 34-0  
Ch 35-0  
Ch 36-0  
:Select  
Enter: Confirm  
Menu: Exit  
Adjusting Channel Block  
1
Use the  
2 Use the  
repeatedly to block or unblock.  
/
keys to select Channel Block and press  
.
/
keys to select the desired channel and press  
3 Press  
to save and exit the screen.  
Change Password: Change password allows you to change your current  
password.  
Changing Password  
1
Use the  
/
keys to select Change Password and press  
.
2 Use the Channel keys to enter the current password and press  
3 Use the Channel keys to enter the new password and press  
.
.
4 Use the Channel keys to enter the new password again for confirmation  
and press  
.
5 Press  
to save and exit the screen.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
OSD Timeout  
Use OSD Timeout to adjust the OSD duration on the screen: 10 sec, 20 sec, or 30  
sec.  
en  
OSD Timeout  
10 sec  
20 sec  
30 sec  
Adjusting OSD Timeout  
Use the keys to select OSD Timeout and press  
keys on the remote control to select 10 sec, 20 sec, or 30  
1
/
.
2 Press the  
sec.  
/
3 Press  
to save and exit the screen.  
OSD Language  
Use OSD Language to select the language to display on the screen: English,  
French, or Spanish.  
en  
OSD Language  
English  
French  
Spanish  
Adjusting OSD Language  
Use the keys to select OSD Language and press  
keys on the remote control to select English, French or  
1
/
.
2 Press the  
Spanish.  
/
3 Press  
to save and exit the screen.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Power Settings  
Use this sub-menu to configure power-related settings for the LCD TV.  
Power Settings  
VGA port-DPMS  
Backlight  
OFF  
Dark Room  
:Select  
Enter: Confirm  
Menu: Exit  
The following options are available:  
VGA port -DPMS: Use this setting to enable or disable VGA port -DPMS.  
Backlight: Using this setting to select backlight options: Bright Room,  
Medium Room, and Dark Room.  
Adjusting Power Settings  
1
Use the  
/
keys to select Power Settings and press  
.
2 Use the  
3 Use the  
4 Press  
/
keys to select a desired option.  
/
keys to adjust the value.  
to save and exit the screen.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP MENUS  
Reset All  
Select Yes on this sub-menu to reset all LCD TV operational settings. Do this only if  
any of the following conditions occurs:  
The system fails to respond to the remote control (make sure the remote  
control batteries are still working and that you are within the transmission  
range).  
The new configuration settings caused unexpected results.  
You forget the system PIN.  
en  
Reset All  
Version  
Use this sub-menu to view the LCD TV’s serial number and firmware version.  
en  
Version  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WALL MOUNT OPTION  
WALL MOUNT OPTION  
The LCD TV has been fitted with VESA FPMPMI compliant mounting holes. These  
200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four  
M6 x L10 mm screws to wall mount the LCD TV.  
USB  
HD  
M
I
CO  
R
M
Y
PO  
Pr  
NE  
Pb  
NT  
L
L
R
SPDIF  
O
PC  
A
UD  
IO  
UT  
PC  
/
V
G
A
WALL MOUNT INSTALLATION REMINDERS  
Remove the LCD TV base first before mounting the unit on a wall.  
It is the user's responsibility to use a UL listed wall mount unit rated to  
support the weight of this LCD TV.  
Please consult qualified contractors for wall mount installation.  
CAUTION:  
The incomplete or improper mounting of this unit to a wall may cause it to fall down  
resulting to property damage and/or potentially serious injury.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
TROUBLESHOOTING  
TROUBLESHOOTING  
Problem  
Corrective Action  
Make sure the power indicator is illuminated  
blue.  
Make sure the power cord is securely  
connected to the AC-in jack and is plugged  
into a functional AC outlet. You may want to  
plug in another electrical device to the power  
outlet to verify that it is supplying the proper  
voltage.  
No power  
Power is suddenly  
turned off.  
Make sure the sleep timer is turned off.  
Use Reset All in Settings menu to reset your  
password.  
Forgotten PIN  
Press only one button at a time.  
Remote control  
does not work.  
Make sure the batteries are properly inserted.  
The batteries may already be drained out.  
Replace batteries with new ones.  
Remote control  
code cannot be  
detected by a  
Purchase a separate learning remote control.  
codes.  
universal remote.  
Make sure the video input cable is properly  
connected to the correct terminal, and that the  
correct input mode is enabled. To illustrate,  
when a VGA cable is connected to display a  
computer screen, the PC input mode must be  
enabled.  
No picture  
Verify that the antenna is properly connected  
and that the preferred channel is enabled in  
the channel list. Press and select  
Channels/Channel List.  
Adjust the display settings.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TROUBLESHOOTING  
Problem  
Corrective Action  
Make sure the VGA cable is properly  
connected to the LCD TV’s VGA port.  
No picture or the No  
Signal message  
appears when a  
VGA cable is  
Decrease the video resolution setting on the  
computer and try again.  
connected.  
Adjust the display settings.  
Picture is cut off or  
appear in a sidebar  
screen.  
Press  
to adjust the Aspect ratio.  
Check your antenna connection. If necessary,  
rotate the antenna and wait up to ten seconds  
for a signal.  
Reduce signal splitters and excessively long  
cables.  
Poor image quality  
in TV mode (cutoff  
picture, snowy  
images).  
Replace poor antenna cables and/or  
connectors to improve signal quality.  
Press  
to adjust the Aspect ratio.  
Adjust the Noise Reduction setting in Picture  
menu.  
In HDMI mode, make sure the external device  
is compatible with the LCD TV.  
If any colors (red, green or blue) are missing,  
check the video cable to make sure it is  
securely connected. Loose or broken pins in  
the cable connector could cause an improper  
connection.  
Wrong, abnormal or  
missing colors  
Adjust the Hue, Saturation and Color  
Temperature settings in Picture menu.  
Connect the TV to another computer and  
check if the problem is with the computer  
screen.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Problem  
No sound  
NOTES:  
Corrective Action  
Make sure the audio input cable is properly  
connected to the correct terminal, and that the  
correct input mode is enabled.  
The volume may be muted, press or Vol+ key  
to turn on the volume.  
Adjust the Bass, Treble, and Balance settings  
in Audio menu.  
If you are using the TV speakers, make sure  
the TV Speakers option is set to On in Audio  
menu.  
If you are using an external audio device,  
press and select Audio to make sure the TV  
Speakers option is set to Off in Audio menu.  
If the problem condition persists even after performing the  
recommended corrective actions, contact us by:  
Contacting the Westinghouse Customer Service at (800) 701-0680  
or e-mail us at [email protected]  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
SPECIFICATIONS  
Item  
Specification  
Model Name  
Cezanne 42  
Active Area  
(Diagonal, mm)  
697.6845 x 392.256  
1920 x 1080  
Resolution  
Brightness  
(Nits, typ)  
400 nits (min) to 500 nits (typical)  
Panel  
Contrast Ratio  
(min)  
3000:1  
Response Time  
(min)  
6.5ms(g-g)  
Aspect Ratio  
Display color  
1.77 (16:9)  
16.7M  
HDMI x3  
AV with R/L Audio x2  
YPbPr with R/L Audio x1  
VGA with Audio mini jack blue x1  
SPDIF Out x1  
Audio/Video  
Input/Output  
Terminals  
USB for service x1  
Tuner x1  
R/L Audio Line Out X1  
Speaker Out  
AV Timing  
8W (2 channels)  
480i/p, 720p, 1080i  
640 x 480 @ 60Hz/75Hz, 800 x 600 @ 60Hz/75Hz,  
1024 x 768 @ 60Hz/75Hz, 1280 x 720 @ 60Hz,1360  
x 768 @ 60Hz, 1280 x 1024 @ 60Hz, 1366 x 768 @  
60Hz  
PC Timing  
Power Consumption  
(Watts)  
163W  
<1W  
Power Consumption  
(Standby, Watts)  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
SPECIFICATIONS  
Item  
Specification  
With stand: 774x549x193 mm  
Dimensions  
(WxHxD)  
Physical  
Specifications  
Without stand: 774x507x88 mm  
9 kgs  
Weight (Net)  
Weight (Gross) 11.43 kgs  
NOTES:  
These product specifications are subject to change without user  
notification.  
Do not set your computer graphics card to exceed the unit’s refresh  
rates; doing so may cause damage to the LCD TV.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

West Bend Coffeemaker QUIKSERVE User Manual
Westell Technologies Network Router 36R566 User Manual
Westinghouse Car Satellite TV System DWM40F1Y1 User Manual
Westinghouse Stereo System SK 16H120S User Manual
Whirlpool Freezer RT14DK User Manual
Whirlpool Range W10309091A User Manual
Woods Equipment Brush Cutter BW126XHD User Manual
Xerox All in One Printer 4118P User Manual
Yamaha Home Theater System DSP AX861SE User Manual
Yamaha Music Mixer EM1620 User Manual