®
ViewSonic
- User Guide
WPG-360
Wireless Presentation Gateway
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Pyководство пользователя
- 使用手冊(繁中)
- 使用手冊 (簡中)
Model No. : VS13670
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Radiation Exposure Statement
This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
This wireless module device complies with part 15 of FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
Industry Canada Notice
This wireless module device complies with Canadian RSS-210.To prevent radio interference to
the licensed service, this device is intended to be operated indoors and away from windows to
provide maximum shielding. Equipment (or its transmitting antenna) that is installed outdoors
is subject to licensing. The installer of this radio equipment must ensure that the antenna is
located or pointed such that it does not emit RF field in excess of Health Canada limits for the
sc.gc.ca/rpb.
R&TTE Compliance Statement
This device complies with the Essential Requirements of the R&TTE Directive of the European
Union (1999/5/EC). This equipment meets the following conformance standards:
ETSI EN 300 328
EN 301 489-01
EN 301 489-17
EN 62311
Notified Countries: Germany, UK, Netherlands, Belgium, Sweden, Denmark, Finland, France,
Italy, Spain, Austria, Ireland, Portugal, Greece, Luxembourg, Estonia, Latvia, Lithuania, Czech
Republic, Slovakia, Slovenia, Hungary, Poland and Malta.
ViewSonic WPG-360
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/
EC of the European Parliament and the Council on restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply
with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below:
Substance
Proposed Maximum Concentration
Actual Concentration
< 0,1%
Lead (Pb)
0,1%
0,1%
0,01%
0,1%
0,1%
0,1%
Mercury (Hg)
< 0,1%
Cadmium (Cd)
< 0,01%
Hexavalent Chromium (Cr6+)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
< 0,1%
< 0,1%
< 0,1%
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or
more lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
weight.
ViewSonic WPG-360
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyright © ViewSonic® Corporation, 2011. All rights reserved.
ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered
trademarks of ViewSonic® Corporation.
Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic® Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
For Your Records
Product Name:
WPG-360
Wireless Presentation Gateway
VS13670
WPG-360_UG_ENG Rev. 1B 05-16-11
Model Number:
Document Number:
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you
for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
ViewSonic WPG-360
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1-1 Package Contents ............................................................................................... 1
1-2 Requirements ...................................................................................................... 2
1-3 Highlights............................................................................................................. 3
1-4 Part Names ......................................................................................................... 4
1-5 Setup................................................................................................................... 5
1-5 Setup................................................................................................................... 6
Chapter II Using WPG ...................................................................................................... 9
2-1 Check the IP address of WPG............................................................................. 9
2-2 Connect to WPG by wireless network ............................................................... 10
2-3 Manual Network Connection Setting ..................................................................11
2-3-1 Windows XP IP address setup: ............................................................... 12
2-3-2 Windows Vista / 7 IP address setup: ....................................................... 13
2-3-3 Macintosh IP address setup:................................................................... 14
Chapter III Using Application Software............................................................................ 15
3-1 Download and launch Application Software....................................................... 15
3-2-1 Using application software ...................................................................... 17
3-2-2 Menu List................................................................................................. 18
3-3 Quarter Split Screen .......................................................................................... 19
3-4 Broadcast .......................................................................................................... 20
3-5 Capture Display................................................................................................. 21
3-6 USB Display ...................................................................................................... 22
Chapter IV Configure WPG............................................................................................. 23
4-1 Conference Control ........................................................................................... 23
4-2 Connect to Web Configuration Menu................................................................. 25
4-3 Status & Info...................................................................................................... 26
4-4 Network Settings ............................................................................................... 27
4-5 Wireless Settings............................................................................................... 28
4-5-1 ‘Basic’ Settings........................................................................................ 28
4-5-2 ‘Advanced’ Settings................................................................................. 30
4-5-3 ‘Security’ Settings.................................................................................... 31
4-5-3-1 Encryption: Disabled..................................................................... 31
4-5-3-2 Encryption: WEP........................................................................... 32
4-5-3-3 Encryption: WPA pre-shared key .................................................. 33
4-5-4 ‘WPS’ Settings......................................................................................... 34
4-6 Projection Setting .............................................................................................. 35
4-7 Password Setting............................................................................................... 36
4-8 Configuration Tools............................................................................................ 37
4-8-1 Configuration Tools ................................................................................. 37
ViewSonic WPG-360
Download from Www.Somanuals.com. All Manuals Search And Download.
4-8-2 Firmware Upgrade .................................................................................. 38
4-9 Restart............................................................................................................... 39
4-10 Logout ............................................................................................................. 40
Chapter V Appendix..................................................................................................... 41
5-1 Hardware Specification...................................................................................... 41
5-2 Troubleshooting................................................................................................. 42
ViewSonic WPG-360
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter I Product Introduction
Congratulations on your purchase of ViewSonic Wireless Presentation Gateway WPG-360.
This section introduces you to the WPG-360 (referred to as the WPG in this user guide).
1-1 Package Contents
(1) WPG-360
(2) IR receiver extension cable
(3) AC adapter extension cable
(4) VGA cable
(1)
(5) Remote controller
(6) USB cable
(7) AC adapter
(8) CD-ROM
(9) Quick Installation Guide
ViewSonic WPG-360
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1-2 Requirements
PC CPU
Speed
Intel Pentium 4/1.5 GHz or higher
(Recommend Intel Core 2 Duo CPU)
512 MB of RAM or higher
Memory
(Recommend 1GB of RAM)
Windows XP 32 bit or above
(Recommend Windows XP 32 bit)
MAC OS X 10.5 and 10.6
(Intel Version only)
Operating
System
100Mbps Wired Fast Ethernet /
Network
USB
11Mbps 802.11b wireless Ethernet
(Recommend 54Mbps 802.11g wireless Ethernet)
USB 1.1 / 2.0 Port
(Recommend USB 2.0 port)
ViewSonic WPG-360
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1-3 Highlights
Thanks again for choosing the product. This product allows multiple users to connect to the
same projector by wired or wireless network and avoiding the hassle of using VGA cable.
Features
1. 802.11 b/g/n Wireless compatibility
2. Supports both Wireless and Ethernet connectivity
3. VGA connections
4. Conference control
5. Supports multiple users at the same time with Quarter split screen
6. WPS (Wi-Fi Protected Setup)
7. Output Resolution: 1400x1050, 1280x800, 1024x768, 800x600
8. Upgrade software via the Internet
9. Network security
10. Presentation remote
11. Video capture, to capture screen image for projection
12. USB display(Not support in MAC)
13. Broadcast for computer desktop or images.
ViewSonic WPG-360
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1-4 Part Names
Front View
Item No.
1
Description
WPS: Single Click when
the device is ON.
Turn On: Single Click
when the device is OFF.
‘POWER’ LED
2
3
4
5
1
2 - 5
‘LAN’ LED
‘WIRELESS’ LED
‘PC IN’ LED
Back View
Name
12V
Description
Connect to A/C adapter
/ ViewSonic projector’s
D/C power outlet
10/100Mbps fast
Ethernet port
LAN
IR IN
Connect to IR receiver
USB A
For mouse function
USB B
Connect to computer
for USB display
Stereo audio output
VGA video output
Receives wireless
signal
Side View
Audio Out
VGA OUT
Antenna
Name
PC IN
Description
Connect to computer’s
VGA output port
Note:
1) WPS stands for Wi-Fi Protected Setup.
ViewSonic WPG-360
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
Item No.
1 Power
Description
Stand-by mode on/off
Show user list: Single Click.
1
2
2 Login
2
WPS: Press and hold for 3 seconds.
3
5 7 6
4
Move up to select user for
presentation
3 Prev.user
4 Next user
Move down to select user for
presentation
Go to previous page
Go to next page
5 Page up
6 Page down
Confirm selected user for
presentation
7 Confirm
Press battery lid and push it
downward by your thumb to open
battery compartment
8 Battery Lid
9 IR LED
Infrared signal transmitter
8
9
Note:
1) Remote controller effective distance is 7 meters. This distance will be shortened in some
environments, or when the battery is low.
2) If there’s strong light source near WPG and / or remote controller, remote controller may
not be able to function properly.
ViewSonic WPG-360
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1-5 Setup
Connecting with your device
Start-up instructions
Connect one end of the VGA cable to the
external display, and the other to WPG
VGA-out port locates at back.
Connect the Ethernet cable to the LAN port
ViewSonic WPG-360
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the IR receiver extending cable to ‘IR
IN’ port located at the back of WPG, and place
the IR receiver at a place where you can point
the remote controller to it easily
Adjust the antennas so they are perpendicular
to the ground.
Connect the A/C power adapter to the
electrical outlet on the wall.
Connect A/C power adapter to the power jack
labeled as ‘12V’ at the back of WPG.
To fix the product placement, please use two
wall mount holes located at the back of the
product.
ViewSonic WPG-360
7
Download from Www.Somanuals.com. All Manuals Search And Download.
If you can see this start screen display on
projector, indicates WPG-360 is working and all
connection cables are correctly connected.
Note:
DO NOT USE VELCRO STICKER ALONE TO FIX THE PRODUCT ON THE WALL!
ViewSonic WPG-360
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter II Using WPG
2-1 Check the IP address of WPG
When WPG is powered on, check the connected display, you can find the IP address and
login code Instruction Page:
The IP Address (Wireless / Wired Ethernet)
of the device.
You can connect to WPG by the IP address of the connection type you’re using (wired /
wireless).
ViewSonic WPG-360
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2 Connect to WPG by wireless network
Use your computer’s Wireless Network Connection window to access an available wireless
network. Select the device from the list. Click Connect. The default device name is
WPG-360.
Note: If using a wireless client other than Windows, the screen above may look differently.
For more details, see your PC user guide.
ViewSonic WPG-360
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3 Manual Network Connection Setting
If there’s no DHCP server available on your LAN, please follow the following instructions to
set the IP address of the computer.
If the operating system of your computer is….
Windows XP
Windows Vista / 7
Macintosh
- please go to section 2-3-1
- please go to section 2-3-2
- please go to section 2-3-3
ViewSonic WPG-360
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3-1 Windows XP IP address setup:
Click ‘Start’ from windows toolbar locate at
bottom, open control panel, then select Network
and Internet Connections, click Network
Connections, and then double-click Local Area
Connection, Local Area Connection Status
window will appear, and then click ‘Properties’
Select ‘Use the following IP address’, then input
the following settings in respective field:
IP address: 192.168.0.x (where x is an integer
greater or less than 200, if there’s more than
one computer need to use this WPG on the
same network, each computer should use an
unique number)
Subnet Mask: 255.255.255.0
Click ‘OK’ when finish.
ViewSonic WPG-360
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3-2 Windows Vista / 7 IP address setup:
Click ‘Start’ from windows toolbar locate at bottom
to select control panel. Click View Network Status
and Tasks, then click Manage Network
Connections. Right-click Local Area Netwrok, then
select ‘Properties’. Local Area Connection
Properties window will appear, select ‘Internet
Protocol Version 4 (TCP / Ipv4), and then click
‘Properties’
Select ‘Use the following IP address’, then input
the following settings in respective field:
IP address: 192.168.0.x (where x is an integer
greater or less than 200, if there’s more than one
computer need to use this WPG on the same
network, every computer should use an unique
number)
Subnet Mask: 255.255.255.0
Click ‘OK’ when finish.
ViewSonic WPG-360
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2-3-3 Macintosh IP address setup:
Select ‘System Preferences’, and
double-click ‘Network’.
Select ‘Manually’ in ‘Configure’ field, then
input the following settings in respective
field:
IP address: 192.168.0.x (where x is an
integer greater or less than 200, if there’s
more than one computer need to use this
WPG on the same network, every
computer should use an unique number)
Subnet Mask: 255.255.255.0
ViewSonic WPG-360
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter III Using Application Software
3-1 Download and launch Application Software
Before any computer can use the WPG, application software must be installed first. Please
follow instructions to download and install WPG application software according to your
system:
Use the web browser to connect to the
IP address shown on WPG (Wireless /
Wired IP address)
WPG’s IP address is shown at the
Instruction page.
Click ‘For Windows’ or ‘For MAC’ button
to download application software.
For Windows XP, please download and
install the video driver.
A window is prompted, to execute,
please check “run”, or “save” to save
application software for future usage.
During the MAC application software
installation, you will also be asked to
install “soundflower” program to make
your MAC PC to output audio correctly,
please install it before going to next
step.
ViewSonic WPG-360
15
Download from Www.Somanuals.com. All Manuals Search And Download.
If you see this message (or anything
similar from your antivirus program)
when running WPG, please click
‘Unblock’ to allow WPG client software
to access network, or WPG client
program will not be able to work
properly.
WPG will auto detect ‘Server IP’ and
‘User Name’, please input login code as
shown on instruction page.
If login code is correct, application
software will appear.
NOTE:
‧If your computer display’s resolution is not 1024x768, you’ll receive a message:
Click ‘Yes’ to adjust your computer display’s resolution automatically, or click ‘No’ to keep
original resolution, but some display area on projector may not able to be used.
‧If no WPG is found on your network, please check if WPG device is turned on or Ethernet
cable is well-connected.
ViewSonic WPG-360
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2-1 Using application software
No. Name
Function Description
1
2
Menu
Access menu list.
Play / Pause
Start / pause presentation. When pausing a progressing
presentation, the displaying image will freeze; press play
button again to resume
3
4
5
6
Minimize
Close
Minimizes Application Software window
Closes Application Software window
Stop a progressing presentation
Stop
Presentation Mode Switches between presentation/Video mode
/ Video Mode
7
Broadcast
You can broadcast some specific content to more than one
WPGs on your network.
8
9
Capture Display
‘1’ to ‘4’
Displays a specific area from your computer desktop to the
projector.
Quarter split display control. Click number 1 to 4 to start / stop
presentation of corresponding quarter split display area.
1
3
2
4
ViewSonic WPG-360
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2-2 Menu List
Besides the buttons, you can also click ‘Menu’ button to access menu list.
Item Name
Function Description
Go to ‘ADMIN’ page of web menu
Check the information of connected WPG.
Switch to different input source.
Administrator
Information
Source Select
VGA1: Displays your computer’s display content on projector.
VGA2: Display ‘VGA IN’ port’s display content on projector.
Search: Search for other available WPG.
Controls the projection:
Projection
Control
Play: Start presentation.
Pause: Pauses presentation.
Stop: Stop presentation.
Blank: Blank displaying image.
Output Resolution: Changes display resolution and you can check
‘Follow Desktop’ to equivalent to output based on original user desktop
resolution setting.
Mode Setting:
‧Presentation Mode: Premium setting for data presentation.
‧Video Mode: Premium setting for smooth video.
‧Custom: Customize the display quality level.
The option is only available in MAC.
Enable Audio
Advanced
After selected, if you do not install “soundflower” program during the
MAC application software installation, you will be asked to install it to
make your MAC PC to output audio correctly.
Broadcast: You can broadcast some specific content to more than one
WPGs on your network.
Capture Display: Displays a specific area from your computer desktop to
the projector.
Logout from WPG.
Logout
Exit
Close menu list
ViewSonic WPG-360
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3 Quarter Split Screen
When there is more than one presenter, you can use this function to display up to 4
presenter’s content to present on display screen simultaneously.
To use Quarter Split Function, please login to WPG, and select a key (1 to 4) to present:
Number 1 to 4 correspond to different area
of display screen:
1
2
3
4
When you click a number, your content will
be displayed in corresponding Quarter-Split
display area
To show content in full-screen mode, simply click ‘Play’ button; to resume to Quarter-Split
display, simply click number key 1 to 4.
NOTE: When ‘Presentation Lock’ is checked, no one will be able to interrupt a progressing
presentation.
ViewSonic WPG-360
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3-4 Broadcast
With this function, you can broadcast the content to multi-WPGs simultaneously on your
network just by simple check the desired WPGs on the list.
To activate broadcast function, click broadcast button
Broadcast, then broadcast control panel will appear:
or select Menu -> Advanced ->
Descriptions of every function will be given below:
Item
Description
Select All
Cancel All
Enable Audio
Select all WPGs found on your network.
Unselect all selected WPGS.
For Windows: Check to enable or disable audio.
For MAC: Click
to enable or disable audio.
NOTE:
‧ Broadcast will not work when doing the presentation. Please stop the presentation
before use.
NOTE:
‧ The maximum length of device name display at broadcast is 15 characters.
3-5 Capture Display
To display a specific area from your computer desktop to the projector.
To use this function, click ‘Capture Display’ button
Capture Display.
, or or select Menu -> Advanced ->
ViewSonic WPG-360
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Descriptions of every function will be given below:
Item
Select Object For Windows:
Select an object (a window, explorer bar, notification area etc.) on your
Description
computer’s player for projection.
For MAC:
It requires “Get” and “Set” two steps to make your computer’s player for
projection.
Get: Select “Get” to get a frame on your computer’s player.
Set: Select “Set” to confirm the frame of the player for projection.
Close: To unlock the frame of your player for projection.
Select a desired area on your computer’s desktop for projection.
Select Area
When you selected an object or area for projection, click ‘Play’ button to start projection. In
this mode, only the object or area you selected will be displayed on projector.
3-6 USB Display
The function allows to project your computer’s desktop on screen via the connection of Mini
USB Type B to USB Type A cable.
Once the connection and detection are succeed, a inquiry window will automatically pop up
ViewSonic WPG-360
21
Download from Www.Somanuals.com. All Manuals Search And Download.
to ask you to execute “vsPresenter” to make the desktop of your PC output to the screen. If
the inquiry window is not pop up, please access to the disk “vsPresenter” from
“COMPUTER” and execute “vsPresenter.exe”.
NOTE:
‧ Only “Play”, “Stop”, “Pause”, “Minimize”, and “Close” keys are available during the USB
display operation.
‧ If the image can not be projected, please disable firewall on your system.
‧ USB display will not work when someone is doing the presentation. Please stop the
presentation before use.
‧ The function is not available in MAC.
‧ Please do not store any data to the disk of "vsPresenter" under "COMPUTER", or the
system will not work properly.
‧ USB Display will not work when presentation or broadcast function is operating. Please
stop them before use.
ViewSonic WPG-360
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter IV Configure WPG
4-1 Conference Control
When there is more than one presentation login to WPG, you can control the content from
different presenter via Conference Control webpage.
Use the web browser to connect to
the IP address of WPG (Wireless /
Wired IP address). WPG’s IP
address can be found at the
lower-left corner of Instruction page
(refer to chapter 2-1).
Click ‘Conference Control’ from
WPG’s web user interface.
All users currently logged in will be
displayed here. To select a user’s
display content in certain area of
Quarter-Split Display, click number 1
to 4; to display in full-screen, click
button of the presenting user. To
stop a progressing presentation,
click
NOTE:
‧ When “Administrator Mode” is enabled, all buttons of the application software will be
disabled.
ViewSonic WPG-360
23
Download from Www.Somanuals.com. All Manuals Search And Download.
To select user by remote controller:
When there is more than one connected application software, you can also use remote
controller to select one of them to display the content (same as ‘Conference control’
function described in last chapter). Press ‘Login’ button on remote control.
You can use ‘Prev.’ and ‘Next’ button on the remote controller to move the bar, then click
button to select the presenting user.
ViewSonic WPG-360
24
Download from Www.Somanuals.com. All Manuals Search And Download.
4-2 Connect to Web Configuration Menu
Use the web browser to connect to the
IP address of WPG (Wireless / Wired
IP address). WPG’s IP address can be
found at the lower-left corner of
Instruction page (refer to chapter 2-1).
Click ‘Administrator Login’ link on the
left.
Please input ‘admin’ as username. For
1st time login you don’t have to input
password, just click ‘OK’ to continue.
You can change password after login.
If you set password before, please
input password in ‘Password’ field.
ViewSonic WPG-360
25
Download from Www.Somanuals.com. All Manuals Search And Download.
4-3 Status & Info
Displays system information, like system software version and IP address. Many useful
information can be obtained here when you need help about system configuration and
firmware upgrade.
ViewSonic WPG-360
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4-4 Network Settings
Displays and configures the network settings.
Item
Description
Obtain an IP address WPG will obtain an IP address from DHCP server automatically.
automatically
Use the following IP
address
Set WPG IP address manually. Fill the fields below to setup IP
address.
DNS Server
Please input the IP address of the DNS (Domain Name Service)
server.
Click ‘Apply’ button to save the settings.
NOTE: When the configuration settings are changed, you must restart the network
connection. You can restart the network connection by clicking “Restart” on the web
configuration menu.
ViewSonic WPG-360
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5 Wireless Settings
Configures wireless network settings.
4-5-1 ‘Basic’ Settings
ViewSonic WPG-360
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays and configures the wireless settings.
Item Description
Wireless Function Select ‘Enable’ to enable wireless network function; ‘Disable’ to
disable it.
Mode
Band
Select wireless mode. Only AP (Access Point) mode is supported.
Select the wireless band. Available options are:
2.4GHz (B) - 802.11b clients only.
2.4GHz (N) - 802.11 Draft-n clients only.
2.4GHz (B+G) - 802.11b and 802.11n clients.
2.4GHz (G) - 802.11g clients only.
2.4GHz (B+G+N) - 802.11b, 802.11g, and 802.11n clients.
Input the Device Name of presentation gateway here. Default is
‘WPG-360”.
Device Name
(SSID)
Channel Number Select the wireless channel number: 1 to 13. (1 to 11 in certain
version of product)
Associated Client Shows all connected wireless clients (wired clients will not be
displayed here).
Click ‘Refresh’ button to reload list.
Click ‘Apply’ button to save the settings.
NOTE: When the configuration settings are changed, you must restart the network
connection. You can restart the network connection by clicking “Restart” on the web
configuration menu.
ViewSonic WPG-360
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5-2 ‘Advanced’ Settings
Display and configures the advanced settings.
Item
Description
Fragment
Set the Fragment threshold of wireless radio.
Default value is 2346.
Threshold
RTS Threshold
Beacon Interval
DTIM Period
Data Rate
Set the RTS threshold of wireless radio. Default value is 2347.
Set the beacon interval of wireless radio. Default value is 100.
Set the DTIM period of wireless radio. Default value is 3.
Change data transfer rate. Default value is ‘Auto’ and it’s
recommended to use default setting.
N Data Rate
Same as above, but only for 802.11n clients.
Set channel width of wireless radio. Default setting is ‘Auto 20/40
MHz’.
Channel Width
Preamble Type
Set the type of preamble of wireless radio, Default setting is ‘Short
Preamble’.
Broadcast Device
Name (SSID)
CTS Protect
Decide if the product will broadcast its own device name or not. You
can hide the device name of this product (set the option to ‘Disable’)
Enable to reduce the chance of radio signal collisions between
802.11b and 802.11g wireless access points. It’s recommended to
ViewSonic WPG-360
30
Download from Www.Somanuals.com. All Manuals Search And Download.
set this option to ‘Auto’ or ‘Always’.
Tx Power
You can set the output power of wireless radio.
Enhances the data transfer rate of network. Default setting is
“Enable”.
Turbo Mode
Wi-Fi MultiMedia Quality of Service is a set of features for Wi-Fi networks
that improve the user experience for audio, video, and voice applications
by prioritizing data traffic. Default setting is “Disable”.
WMM
Click ‘Apply’ button to save the settings.
NOTE: When the configuration settings are changed, you must restart the network
connection. You can restart the network connection by clicking “Restart” on the main menu.
4-5-3 ‘Security’ Settings
4-5-3-1 Encryption: Disabled
Disables wireless encryption.
ViewSonic WPG-360
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5-3-2 Encryption: WEP
Enable WEP encryption. Wireless clients must support WEP encryption and know the
encryption key you set here.
Display and configures the encryption settings.
Item
Description
Key Length
Select WEP key length (64 bit or 128 bit), longer WEP key provides
better security. Recommend to select ‘128-bit’ for better security.
Select key format: ASCII or Hex.
Key Format
ASCII: 5 characters (64 bit key length) / 13 characters (128 bit key
length)
HEX: 10 characters (64 bit key length) / 26 characters (128 bit key
length)
Default Tx Key
You can set up to four sets of WEP key and decide which key is
being used by default here. Default setting is ‘1’
Input WEP key characters here. Use any alphanumerical characters
(0-9, a-z, and A-Z) if you select ‘ASCII’ key format, and use
characters 0-9, a-f, and A-F for HEX
Encryption Key 1
to 4
Click ‘Apply’ button to save the settings.
NOTE: When the configuration settings are changed, you must restart the network
connection. You can restart the network connection by clicking “Restart” on the main menu.
ViewSonic WPG-360
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5-3-3 Encryption: WPA pre-shared key
Enable WEP encryption. Wireless clients must support WPA encryption and know the
encryption passphrase you set here.
Display and configures the encryption settings.
Item
Description
WPA Unicast
Cipher Suite
Select the type of WPA cipher suite. Select ‘WPA (TKIP) for
maximum compatibility and WPA2 (AES) / WPA2 Mixed for better
security.
Pre-shared Key
Format
Select the type of pre-shared key: Passphrase or HEX characters.
Pre-shared Key
Input WPA Passphrase here.
Passphrase: 8 or more alphanumerical characters, up to 63
characters
Hex: 64 characters (0-9, a-f, and A-F)
Click ‘Apply’ button to save the settings.
NOTE: When the configuration settings are changed, you must restart the network
connection. You can restart the network connection by clicking “Restart” on the main menu.
ViewSonic WPG-360
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4-5-4 ‘WPS’ Settings
In this menu, you can use WPS (Wi-Fi Protected Setup) to setup secure wireless
connections quickly and easily with WPS-compatible wireless clients.
Display and configures the WPS setting.
Item
Description
Enable WPS
Check this box to enable WPS functionality; uncheck to disable
WPS.
WPS Status
Self PinCode
Displays WPS configuration status: Configured (WPS ready), or
Unconfigured. If you set wireless security as described in previous
section already, WPS status will be ‘Configured’.
Displays WPS self pin code. This code will be used when pin-style
WPS pairing mode is being used, and WPS wireless clients will
need to know this code.
Device Name
(SSID)
Displays the device name of this WPG.
Authentication
Mode
Displays current wireless authentication mode.
Passphrase Key
Config Mode
Here uses asterisk mark ( * ) to show WPA passphrase key.
Select WPS configuration mode: ‘Registrar’ and ‘Enrollee’. Default
and recommend setting: Registrar.
Configure via Push Click “Start PBC” to handshake with other device with WPS function.
Button
NOTE 1: When WPG is in ‘Registrar mode’, another wireless device
must set to ‘Enrollee’ mode; and vice versa.
NOTE 2: When no WPS connection is established within 2 minutes,
this mode will be turned off.
NOTE 3: You can also press ‘WPS’ button located on the front of
wireless presentation gateway to enter WPS mode, too.
Configure via
Client PinCode
Input the PIN code (up to 8 characters) of the WPS-enabled device
here, then click ‘Start PIN’ button, then WPG will establish
connection with it automatically.
ViewSonic WPG-360
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4-6 Projection Setting
Displays and configures the projection setting.
Item
Description
Instruction Page
Language
Selection
Select the displaying language.
Output Resolution Select output resolution for projection.
Presentation lock Check this box to prevent other users to interrupt current
presentation.
Click ‘Apply’ button to save the settings.
NOTE: When the configuration settings are changed, you must restart the network
connection. You can restart the network connection by clicking “Restart” on the main menu.
ViewSonic WPG-360
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4-7 Password Setting
Displays and configures the password setting.
Item
Description
Current Password Input current password here.
New Password /
Confirmed
New Password: Enter new password.
Confirmed Password: Confirmed the new entered password.
Password
Click ‘Apply’ button to save the settings.
NOTE: When the configuration settings are changed, you must restart the network
connection. You can restart the network connection by clicking “Restart” on the main menu.
ViewSonic WPG-360
36
Download from Www.Somanuals.com. All Manuals Search And Download.
4-8 Configuration Tools
4-8-1 Configuration Tools
Allows you to backup / restore the setting of WPG.
Displays and configures the configuration tools.
Item
Description
Backup Settings
Click ‘Save…’ button to save wireless presentation gateway’s
current setting as a file and store it on your computer.
Click ‘Browse…’ button to select a previously-saved configuration
file stored in your computer’s folder.
Restore Settings
Reset
Reset all settings of wireless presentation gateway back to factory
default settings.
ViewSonic WPG-360
37
Download from Www.Somanuals.com. All Manuals Search And Download.
4-8-2 Firmware Upgrade
Upgrade the firmware of this WPG.
Select ‘Auto’, WPG will download and upgrade latest firmware automatically once WPG
connects to Internet.
Note:
‧ It’s recommended to use wired Ethernet connection to perform firmware upgrade.
‧ The upgrade might take more than 30 minutes, vary by Internet speed. Please be
patient during the upgrade, and do not turn off the power until the device restarts and
resumes the screen back to instruction page.
ViewSonic WPG-360
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4-9 Restart
Restart WPG when the device is not working properly or to apply changes made on web
configuration menu.
Note: Restart takes about 60 seconds.
Click ‘Apply’ to restart the WPG.
Click ‘OK’ to restart the WPG, or click ‘Cancel’ to abort.
ViewSonic WPG-360
39
Download from Www.Somanuals.com. All Manuals Search And Download.
4-10 Logout
If you wish to logout from web configuration menu, click ‘Logout’.
ViewSonic WPG-360
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter V Appendix
5-1 Hardware Specification
Product name
Power Supply
Dimensions
Weight
WPG-360
External power supply (12V DC, 1A)
133.4 x 92.4 x 31.08mm
218.5g (0.48lbs)
Connectivity
VGA Connector :
VGA OUT ------ D-sub 15 pin mini x 1(Black) x 1
PC IN ------------D-sub 15 pin mini x1(Blue) x 1
Audio Output Interface:
3.5mm jack x 1
USB Connector :
USB Type A ----- For mouse control.
USB Mini Type B ----- For USB display.
Wired Network Interface :
10/100Mbps auto-sensing/auto-cross-over Ethernet port x 1
Wireless Network Interface :
Built-in 802.11b/g/n
Output Resolution
1400x1050, 1280x800, 1024 x 768, 800x600
Operating Temperature: 0 ~ 40°C
Operating Humidity: 5 ~ 85%, non-condensing
Supported OS :
Environmental Requirements
Operating System
1. Windows XP 32/63-bit (SP2 or higher)
2. Windows Vista 32/63-bit (SP1 or higher)
3. MAC OS 10.5 / 10.6 (Intel Version only)
Supported Web browsers :
1. Microsoft Internet Explorer 6.0 (SP2) or higher
2. Mozilla’s Firefox 3.0 or later
3. Safari
Software
Wireless Presentation Gateway software application
ViewSonic WPG-360
41
Download from Www.Somanuals.com. All Manuals Search And Download.
5-2 Troubleshooting
Scenario: Can’t connect to wireless presentation gateway
Solution:
1. Check the LED lights located at the front of WPG. If ‘Power’ LED does not light, do the
following check:
Check the connection of A/C adapter, and if the electrical outlet you used with A/C
adapter is functioning properly.
Press ‘Power’ button on remote controller to see if ‘Power’ LED lights now.
2. Check the network connection.
3. Make sure you connected to correct IP address.
4. If you’re using wireless network, make sure you connected to correct device.
5. If you’re using wireless network, check the WEP / WPA password.
Scenario: Remote controller does not work
Solution: 1. Replace the battery of remote controller with a new one (CR-2032 lithium
battery).
2. Please point the IR transmitter (located at the top of remote controller) to the IR receiver
of WPG.
3. Make sure the IR receiver of WPG (labeled as ‘Remote’) is not blocked by any object.
4. If there’s strong / fluorescent light source near IR transmitter / receiver, remote controller
may not be able to function properly.
5. If the distance between IR transmitter / receiver is longer than 7 meters, remote controller
may not working properly.
6. Make sure the IR extending cable is correctly inserted to ‘IR IN’ jack at the back of WPG,
not ‘AUDIO OUT’ jack.
ViewSonic WPG-360
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Scenario: No image displayed on WPG’s display
Solution:
1. Check the connection between video display and WPG.
2. Make sure the video display you’re using supports the video output mode you selected
(in VGA mode).
3. Make sure the video display is switched on.
Scenario: I hear noise when WPG is operating.
Solution: If you smell something strange or even see smoke come out from WPG, unplug
the A/C adapter (if possible), and return the WPG back to dealer of purchase immediately.
Scenario: No image output via USB display in Windows system
Solution:
1. Make sure the cable is well-connected between WPG-360 and your PC.
2. Make sure no one is doing the presentation.
3. Please access to the disk “vsPresenter” from “COMPUTER” and execute
“vsPresenter.exe”.
Scenario: No audio output in MAC
Solution:
1. Please make sure “Enable Audio” is selected.
2. An inquiry window will pop up to ask you to install extra program to you’re your MAC PC
to output audio to WPG-360.
Scenario: No image display when operating some media players (e.g. Windows Media
Player) under Windows XP.
Solution:
1. Please download video driver from the “Download” page and install to your computer.
Please always reboot the computer to make it effectively after the installation.
2. The video driver installation inquiry will automatically pop up whenever WPG-360
ViewSonic WPG-360
43
Download from Www.Somanuals.com. All Manuals Search And Download.
application software is activated. Once installed, it will not be shown next time.
NOTE:
‧ If certain web content (e.g. youtube) could not be displayed, please go to “Device
Manager” of the computer and uninstall the “mirage driver”.
Scenario: When USB mouse does not work at certain application programs under Windows
Vista or Windows 7.
Solution:
1. Please go to “Change User Account settings”, uncheck “Use User Account Control (UAC)
to help protect your computer” (for Windows Vista) or set to “Never notify” (for Windows 7).
ViewSonic WPG-360
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
For technical support or product service, see the table below or contact your reseller.
NOTE: You will need the product serial number.
T = Telephone
F = FAX
Country/Region
Website
Email
AUS= 1800 880 818
NZ= 0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
Canada
Europe
Hong Kong
India
T= 852 3102 2900
T= 1800 266 0101
support/call-desk/
Ireland (Eire)
Korea
T= 080 333 2131
T= 0800-4441185
T= 1230-020-7975
T= 01800-9-157235
T= 001-8882328722
Latin America
(Argentina)
Latin America (Chile)
Latin America
(Columbia)
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16
Latin America (Peru)
Macau
ap.viewsonic.com/me/
T= 0800-54565
T= 853 2870 0303
Contact your reseller
Middle East
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
Puerto Rico & Virgin
Islands
Singapore/Malaysia/
Thailand
ap.viewsonic.com/za/
T= 65 6461 6044
South Africa
Contact your reseller
support/call-desk/
United Kingdom
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
United States
ViewSonic WPG-360
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Please go to the Customer Support table in this guide for the ViewSonic website in your region
to get warranty information.
ViewSonic WPG-360
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|