ViewSonic Projector PJD6211P User Manual

®
ViewSonic  
- User Guide  
- Guide de l’utilisateur  
- Bedienungsanleitung  
- Guía del usuario  
- Guida dell’utente  
- Guia do usuário  
- Användarhandbok  
- Käyttöopas  
PJD6211P  
DLP Projector  
- Руководство пользователя  
- 使用手冊 (繁體)  
- 使用手册 (简体)  
- 사용자 안내서  
IMPORTANT: Please read this User Guide to obtain important  
information on installing and using your product in a safe  
manner, as well as registering your product for future service.  
Warranty information contained in this User Guide will describe  
your limited coverage from ViewSonic Corporation, which is  
English, or in specific languages using the Regional selection  
box in the upper right corner of our website.  
- อการใชงาน  
- Podręcznik użytkownika  
- Kullanιcι kιlavuzu  
“Antes de operar su equipo lea cuidadosamente las  
instrucciones en este manual”  
Model No. : VS13729  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Projector Overview ......................................................................................................7  
Remote Control Operation ........................................................................................13  
Adjusting the Projector ..............................................................................................16  
Menu Operation ............................................................................................18  
Replacing the Lamp ..................................................................................................25  
Specifications ...............................................................................................27  
IR Control Code ........................................................................................................34  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
Important Safety Instructions  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this unit near water.  
Clean with a soft, dry cloth.  
Do not block any ventilation openings. Install the unit in accordance with the  
manufacturer’s instructions.  
8.  
9.  
Do not install near any heat sources such as radiators, heat registers, stoves, or other  
devices (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the other. A grounding type plug has two  
blades and a third grounding prong. The wide blade and the third prong are provided  
for your safety. If the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs.  
Convenience receptacles and the point where they exit from the unit. Be sure that the  
power outlet is located near the unit so that it is easily accessible.  
11. Only use attachments/accessories specified by the manufacturer.  
12.  
Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the unit. When a cart is used, use caution when  
moving the cart/unit combination to avoid injury from tipping over.  
13. Unplug this unit when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the unit  
has been damaged in any way, such as: if the power-supply cord or plug is damaged,  
if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or  
moisture, or if the unit does not operate normally or has been dropped.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
2
Declaration of RoHS Compliance  
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the  
European Parliament and the Council on restriction of the use of certain hazardous substances in  
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum  
concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:  
Proposed Maximum  
Substance  
Actual Concentration  
Concentration  
Lead (Pb)  
0.1%  
0.1%  
0.01%  
0.1%  
0.1%  
0.1%  
< 0.1%  
< 0.1%  
< 0.01%  
< 0.1%  
< 0.1%  
< 0.1%  
Mercury (Hg)  
Cadmium (Cd)  
6+  
Hexavalent Chromium (Cr  
)
Polybrominated biphenyls (PBB)  
Polybrominated diphenyl ethers (PBDE)  
Certain components of products as stated above are exempted under the Annex of the RoHS Directives  
as noted below:  
Examples of exempted components are:  
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not  
specifically mentioned in the Annex of RoHS Directive.  
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic  
parts (e.g. piezoelectronic devices).  
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).  
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up  
to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
3
Copyright Information  
Copyright© ViewSonic® Corporation, 2010. All rights reserved.  
Macintosh and Power Macintosh are registered trademarks of Apple Inc.  
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft  
Corporation in the United States and other countries.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of  
ViewSonic Corporation.  
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are  
trademarks of VESA.  
PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.  
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions  
contained herein; nor for incidental or consequential damages resulting from furnishing this material, or  
the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change  
product specifications without notice. Information in this document may change without notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose  
without prior written permission from ViewSonic Corporation.  
Product Registration  
To meet your future needs, and to receive any additional product information as it becomes available, please  
provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.  
For Your Records  
Product Name:  
PJD6211P  
ViewSonic DLP Projector  
VS13729  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
PJD6211P_UG_ENG Rev. 1A 07-19-10  
_______________________________  
_______________________________  
The lamp in this product contains mercury.  
Please dispose of in accordance with local, state or federal laws.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
4
Introduction  
Projector Features  
The projector integrates high-performance optical engine projection and a user - friendly  
design to deliver high reliability and ease of use.  
The projector offers the following features:  
®
Single chip 0.55" Texas Instruments DLP technology  
XGA (1024 x 768 pixels)  
Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling  
compression compatibility for VGA, SVGA, XGA and SXGA  
®
Compatibility with Macintosh computers  
Compatibility with NTSC, PAL, SECAM and HDTV  
D-Sub 15-pin terminal for analog video connectivity  
User-friendly, multi-language on-screen display  
Advanced electronic keystone correction  
RS-232 connector for serial control  
The information in this manual is subject to change without notices.  
The reproduction, transfer or copy of all or any part of this document is not  
permitted without express written consent.  
ViewSonic  
PJD6211P  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Package Contents  
When you unpack the projector, make sure you have all these components:  
Projector with Lens Cap  
AC Power Cord  
Remote Control (IR)  
ViewSonic CD Wizard  
Quick Start Guide  
VGA Cable (D-SUB to D-SUB)  
Optional accessories  
Filter cover  
P/N: P4R34-4600-00  
RS232 cable  
P/N: J2552-0208-00  
RGB to component adapter  
P/N: J2552-0212-00  
Contact you dealer immediately if any items are missing, appear damaged, or if  
the unit does not work  
Save the original shipping carton and Packing material; they will come-in handy  
if you ever to ship your unit. for maximum protection, repack your unit as it was  
originally packed at the factory.  
.
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
6
 
Projector Overview  
Front View  
12  
11 10 9  
8
1
2
3
4
5
6
7
Lens cap  
Filter cover  
Speaker  
1
2
3
4
5
6
7
8
Elevator button  
Lens cap strap  
Projection lens  
Focus ring  
Zoom ring  
Control panel  
Lamp cover  
9
10  
11  
12  
Front IR remote control sensor  
Ventilation holes (intake)  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
7
 
Rear View  
4
2
3
5
1
6
Connection ports  
AC power socket  
Kensington lock  
Rear IR remote control sensor  
Ventilation holes (exhaust)  
Security bar  
1
2
3  
4
5
6
Bottom View  
1
2
Ceiling mount holes (M4*6)  
Tilt-adjustment feet  
1
2
This projector can be used with a ceiling mount for support. The ceiling mount is  
not included in the package.  
Contact your dealer for information to mount the projector on a ceiling.  
ViewSonic  
PJD6211P  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Product  
Control Panel  
LED  
9
1
2
3
4
5
6
8
7
4
Power (Power LED indicator)  
Refer to “LED Indicator Messages”.  
TEMP (Temperature LED indicator)  
Refer to “LED Indicator Messages”.  
LAMP (Lamp LED indicator)  
1
2
3
Refer to “LED Indicator Messages”.  
Button Function  
/
Keystone  
4
5
6
7
8
9
Manually correct distorted images resulting from an angled projection.  
Four directional buttons  
Use four directional buttons to select items or make adjustments to your selection.  
ENTER  
Enter to sub-menu and confirm the menu selection.  
SOURCE  
Manually select an input source.  
MENU/EXIT  
Display or exit the on-screen display menus.  
Power  
Turn the projector on or off.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
9
   
Connection Ports  
8
9
3
4
5
7
1
2
6
1
COMPUTER IN 1  
Connect image input signal (analog RGB or component) to this jack.  
1
2
3
4
5
6
7
COMPUTER IN 2  
Connect image input signal (analog RGB or component) to this jack.  
MONITOR OUT  
Connect to a computer display, etc.  
S-VIDEO  
Connect S-Video output from video equipment to this jack.  
VIDEO  
Connect composite video output from video equipment to this jack.  
USB  
This connector is for firmware update and mouse function support.  
RS-232  
When operating the projector via a computer, connect this to the controlling  
computer's RS-232C port.  
AUDIO IN  
8
9
Connect an audio output from video equipment to this jack.  
AUDIO OUT  
Connect to a speaker or other audio input equipment.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
10  
 
Remote Control  
POWER  
1
Turn the projector on or off.  
Four directional buttons  
2
Use four directional buttons to  
select items or make adjustments  
to your selection.  
MENU  
3
Display or exit the on-screen display  
menus.  
Enter  
4
Confirmed selections.  
Exit  
5
Exit OSD Menu.  
Keystone+ / -  
6
Adjust image distortion caused by  
tilting the projector.  
Magnify  
Freeze  
12  
13  
7
Press “Freeze” to pause the screen image.  
Press again to cancel the freeze function.  
Zoom in and out the images.  
Source  
Manually select an input source.  
Mute  
8
Cut off the sound temporarily. Press again  
to cancel the Mute function.  
Auto  
Blank  
14  
15  
9
Resynchronize the projector to the  
input signal from a computer. This  
function is available for computer  
mode only.  
Cut off the screen temporarily. Press  
again to cancel the Blank Screen  
function.  
Mouse  
Volume + / -  
Adjust the volume level.  
10  
Switch between OSD control and  
Mouse control (Apply to  
Navigation buttons, Enter/Mouse  
Left Click, and Exit/Mouse Right  
Click buttons).  
ViewM  
11  
Switch in between high brightness  
performance or Accuracy color  
performance.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
11  
 
Replacing the Battery  
For the first time use:  
Remove the transparent insulation tape by pulling  
it before use.  
For battery change:  
1.  
Push the catch to the left and remove the battery  
holder.  
2.  
3.  
Remove the old Lithium coin cell and install new one  
(CR2025). Ensure that the side with the mark “+” is up.  
Push the battery holder back into the remote control  
until you feel a click.  
Caution  
Risk of explosion if battery is replaced by an incorrect type.  
Dispose of used batteries according to the instructions.  
Make sure the plus and minus terminals are correctly aligned when loading a battery.  
Keep the battery out of the reach of children.  
Do not recharge the battery or expose the battery to fire or water.  
Do not dispose the used battery along with household waste. Dispose used  
batteries according to local regulations.  
Danger of explosion may happen if batteries are incorrectly replaced.  
Replace only with the same type recommended by the manufacturer.  
Battery should not be in or near to fire or water, keep batteries in a dark, cool  
and dry place.  
If suspect battery leakage, wipe out the leakage and then replace a new battery. If  
the leakage adheres to your body or clothes, rinse well with water immediately.  
ViewSonic  
PJD6211P  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote Control Operation  
Point the remote control at the infrared remote sensor and press a button.  
Operating the projector from  
the front  
Operating the projector from  
the rear  
5m  
7m  
5m  
The remote control may not operate when there is sunlight or other strong  
light such as a fluorescent lamp shining on the remote sensor.  
Operate the remote control from a position where the remote sensor is visible.  
Do not drop the remote control or jolt it.  
Keep the remote control out of locations with excessively high temperature or  
humidity.  
Do not get water on the remote control or place wet objects on it.  
Do not disassemble the remote control.  
ViewSonic  
PJD6211P  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation  
Connecting the Projector  
1
2
3
4
2
5
6
7
1
1
Audio Cable  
S-Video Cable  
1
5
6
7
VGA Cable (D-Sub to D-Sub)  
Composite Video Cable  
VGA (D-Sub) to HDTV (RCA) Cable  
2
RS-232 Cable  
3
USB Cable  
4
The figure above is a sample connection. This does not mean that all of these  
devices can or must be connected simultaneously.  
The cables that come with the projector may differ from the above illustration.  
The included cables are based on actual shipment delivery.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
14  
   
Powering On/Off the Projector  
Powering On the Projector:  
1.  
2.  
3.  
Remove the projector lens cap.  
Complete the AC power cord and peripheral signal cable(s) connections.  
Press  
button to turn on the projector.  
The projector takes a minute or so to warm up.  
Turn on your source (computer, notebook, DVD, etc.). The projector automatically  
detects your source.  
4.  
If you are connecting multiple sources to the projector simultaneously, press  
the SOURCE button on the control panel or the Source button on the remote  
control.  
Warning  
Remove the lens cap first before powering on.  
Never look into the lens when the lamp is on. This can damage your eyes.  
This focal point concentrates high temperature. Do not place any object near  
it to avoid possible fire hazard.  
Powering Off the Projector:  
1.  
Press  
off? Press Power again" appear on the screen.  
Press button again to confirm.  
button to turn off the projector lamp. You will see a message "Power  
2.  
The cooling fans continue to operate for cooling cycle.  
When the Lamp LED begins flashing, the projector has entered stand-by mode.  
If you want to turn the projector back on, you must wait until the projector has  
completed the cooling cycle and has entered stand-by mode. Once in stand-  
by mode, simply press  
button to restart the projector.  
3.  
4.  
Disconnect the AC power cord from the electrical outlet and the projector.  
Do not turn on the projector right after power off.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
15  
 
Adjusting the Projector  
Adjusting the Projector Height  
Tilt-adjustment foot  
Elevator foot  
Elevator button  
The projector is equipped with an elevator foot to adjust the image height.  
To raise or lower the image:  
1.  
To raise or lower the image, press the elevator button and raise or lower the front  
of the projector. Release the button to lock the adjustment.  
To level the image on the screen, turn the tilt-adjustment foot to fine-tune the  
height.  
2.  
To avoid damaging the projector, make sure that the elevator foot and tilt-  
adjustment foot are fully retracted before placing the projector in its carrying  
case.  
Adjusting the Projector Zoom and Focus  
Zoom ring  
Focus ring  
1.  
2.  
Focus the image by rotating the focus ring. A still image is recommended for focusing.  
Adjust the image by sliding the zoom ring.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
16  
 
Adjusting Projection Image Size  
Refer to the graphic and table below to determine the screen size and projection distance.  
200"  
120"  
100"  
60"  
40"  
Wide: 1.57m Tele: 1.73m  
Wide: 2.35m Tele: 2.59m  
Wide: 3.92m Tele: 4.31m  
Wide: 4.71m Tele: 5.18m  
Wide: 7.84m Tele: 8.63m  
4 : 3 Screen  
Wide  
Tele  
Projection distance  
inch  
Screen size  
Diagonal (inch)  
Projection distance  
m
inch  
m
40  
50  
1.57  
1.96  
2.35  
2.75  
3.14  
3.53  
3.92  
4.71  
5.88  
7.84  
9.80  
11.76  
61.76  
1.73  
2.16  
2.59  
3.02  
3.45  
3.88  
4.31  
5.18  
6.47  
8.63  
10.78  
12.94  
67.93  
84.92  
77.20  
60  
92.64  
101.90  
118.88  
135.86  
152.85  
169.83  
203.80  
254.75  
339.66  
424.58  
509.49  
70  
108.07  
123.51  
138.95  
154.39  
185.27  
231.59  
308.78  
385.98  
463.18  
80  
90  
100  
120  
150  
200  
250  
300  
Position the projector in a horizontal position; other positions can cause heat  
build-up and damage to the projector.  
Keep a space of 30 cm or more between the sides of the projector.  
Do not use the projector in a smoky environment. Smoke residue may build-  
up on critical parts and damage the projector or its performance  
.
Consult with your dealer for special installation such as suspending from a  
ceiling.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
17  
Menu Operation  
The projector has multilingual on-screen display menus that allow you to make image  
adjustments and change a variety of settings.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
18  
 
1 Adjustable range and default setting vary depending on signal type.  
2 This function is only available when the projector is installed an optional filter cover.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
19  
How to operate  
1.  
2.  
3.  
Press the MENU button to open the OSD menu.  
When OSD is displayed, use to select any feature in the main menu.  
After selecting the desired main menu item, press to enter sub-menu for  
feature setting  
Use to select the desired item and adjust the settings with  
Press the MENU button, the screen will return to the main menu.  
S
/
T
X
.
4.  
5.  
6.  
S
/
T
W
/
X.  
To exit OSD, Press the MENU button again. The OSD menu will close and the  
projector will automatically save the new settings.  
Picture (Computer / Video Mode)  
Brightness  
Brighten or darken the image.  
Contrast  
Set the difference between light and dark areas.  
Color Setting  
Adjust the color temperature. At higher temperature the screen looks colder; at lower  
temperature, the screen looks warmer. If you select “User”, then you can change the  
intensity of each of 3 color (Red, Green, Blue) to customize user color temperature.  
User Color  
User Color provides six sets (RGBCMY) of colors to be adjusted. When you select  
each color, you can independently adjust its range and saturation according to your  
preference.  
Keystone  
Manually correct distorted images resulting from an angled projection.  
Aspect Ratio  
Select how the picture fits on the screen:  
4:3  
:
The input source will be scaled to fit the projection screen.  
16:9 : The input source will be scaled to fit the width of the screen.  
Image  
There are many factory presets optimized for various types of images.  
PC  
:
:
:
:
For computer or notebook.  
For home theater.  
For PC standard color.  
Memorize user’s settings.  
Movie  
ViewMatch  
User  
White Board : For white projection screen type.  
Black Board : For black projection screen type.  
Green Board: For green projection screen type.  
Brightest  
:
For a daylight environment.  
White Intensity  
Increase the brightness of white areas.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
20  
Gamma  
Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter.  
3D Sync  
Off: Disable 3D function  
3D-Vision: For NVIDIA 3D Vision application  
DLP-LINK: For TI 3D DLP-LINK application  
3D Sync Invert (for TI 3D DLP-LINK only)  
On: Invert left and right frame contents.  
Off: Default frame contents.  
Computer Image (Computer Mode)  
Frequency  
Adjust the timing of the projector relative to the computer.  
Tracking  
Adjust the phase of the projector relative to the computer.  
H Position (Horizontal Position)  
Adjust the image left or right within the projection area.  
V Position (Vertical Position)  
Adjust the image up or down within the projection area.  
Video Image (Video Mode)  
Color  
Adjust a video image from black and white to fully saturated color.  
Sharpness  
Sharpen or soften the image.  
Tint  
Shift colors toward red or green.  
Sound (Computer / Video Mode)  
Volume  
Adjust the volume level.  
Mute  
Cut off the sound temporarily.  
Setting (Computer / Video Mode)  
Menu Position  
Choose the menu location on the display screen.  
Projection  
Adjust the picture to match the orientation of the projector: upright or upside-down, in  
front of or behind the screen. Invert or reverse the image accordingly.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
21  
Signal Type  
Specify the source to the COMPUTER IN 1/COMPUTER IN 2 terminal that you wish to  
project.  
Auto : Automatically detect the input signal type from COMPUTER IN 1 and  
COMPUTER IN 2 terminals.  
RGB : For VGA signal  
YCbCr/YPbPr:For component signal  
Lamp Hours  
Display the lamp’s elapsed operating time (in hours).  
Lamp Hours Reset  
Reset the lamp Hour to 0 hours.  
Filter Mode  
Use this function to activate filter mode after the projector is installed an optional filter  
cover.  
Filter Hours  
Display the filter’s elapsed operating time (in hours).  
When Filter Mode is turned on, the Filter Hours also turns on automatically.  
Filter Hours Reset  
Reset the filter Hour to 0 hours.  
Power Saving  
If no operation is performed for a specific period of time, projector will automatically  
turn off.  
Auto Source  
Automatically scan through all the input source.  
ECO Mode  
Use this function to dim the projector lamp light output which will lower power  
consumption and increase lamp life.  
This function will be unavailable when the DCR function is on.  
High Altitude  
Use this function to allow the fans operates at full speed continuously to achieve  
proper high altitude cooling of the projector.  
OSD Timeout  
Duration of OSD menu display countly starts (at idle state by second).  
Option (Computer / Video Mode)  
Blank Screen  
Blank the screen temporarily, and select the screen color when this function is active.  
Password  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
22  
Set or change the password. When the password function is added, image projection  
will require to input the preset password when turning on the projector.  
Screen Capture  
Capture the current projection screen as a start-up screen.  
Screen Capture Delete  
Delete the captured projection screen.  
Start-up Screen  
Select start-up screen when the projector is powered on or when no signal is input.  
"User" is the screen that you captured.  
Zoom  
Zoom in and out the images.  
DCR (Dynamic Contrast Ratio)  
Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable  
DCR will resume to normal contrast performance. DCR will impact lamp life and  
system noise performance.  
Closed Caption  
Enable or Disable closed captions by selecting CC1 (closed caption1, the most  
common channel), CC2, CC3, CC4, T1, T2 or OFF.  
Brilliant Color  
Produce an expanded on-screen color spectrum that delivers enhanced color  
saturation for bright, true-to-life images. Suggesting to turn Off for most video sources  
and On for most computer sources.  
Green Mode  
Enable this function when power consumption is under 1W.  
Message  
Enable or disable the message box at the right bottom of the screen.  
Language (Computer / Video Mode)  
Select the language used by the on-screen menu.  
Factory Default (Computer / Video Mode)  
Restore settings to factory default .  
System Info (Computer / Video Mode)  
Source  
Display the current input source.  
Resolution  
Display current input source resolution.  
H. Frequency  
Display current image horizontal frequency.  
V. Frequency  
Display current image vertical frequency.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
23  
Maintenance  
The projector needs proper maintenance. You should keep the lens clean as dust, dirt  
or spots will project on the screen and diminish image quality. If any other parts need  
replacing, contact your dealer or qualified service personnel. When cleaning any part  
of the projector, always switch off and unplug the projector first.  
Warning  
Never open any of the covers on the projector. Dangerous electrical voltages  
inside the projector can cause severe injury. Do not attempt to service this  
product yourself. Refer all servicing to qualified service personnel.  
Cleaning the Lens  
Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.  
Cleaning the Projector Housing  
Gently wipe with a soft cloth. If dirt and stains are not easily removed, use a soft cloth  
damped with water, or water and neutral detergent, and wipe dry with a soft, dry cloth.  
Cleaning the Filter Cover  
The filter cover, which is located at the side of the projector, should be cleaned after  
every 100 hours of use. If it is not cleaned periodically, it can become clogged with  
dust and prevent the projector from being ventilated properly. This can cause over  
heating and damage the projector.  
To clean the filter cover:  
1.  
2.  
3.  
Switch the projector off and unplug the AC  
power cord from the wall socket.  
Remove the filter cover as the illustration  
shown.  
Clean the filter cover.  
To clean the filter cover, you are  
advised to use a small vacuum  
cleaner designed for computers and  
other office equipment.  
If the filter cover is torn, replace it.  
Replace the filter cover.  
4.  
5.  
6.  
Attach the filter cover.  
Plug the power back into the projector.  
Turn off the projector and remove the AC power cord from the power outlet  
before beginning maintenance work.  
Make sure the lens is cool before cleaning.  
Do not use detergents or chemicals other than those noted above. Do not use  
benzene or thinners.  
Do not use chemical sprays.  
Use a soft cloth or lens paper only.  
ViewSonic  
PJD6211P  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Replacing the Lamp  
As the projector operates over time, the brightness of the projector lamp gradually  
decreases and the lamp becomes more susceptible to breakage. We recommend  
replacing the lamp if a warning message is displayed. Do not attempt to replace the  
lamp yourself. Contact the qualified service personnel for replacement.  
The lamp is extremely hot right after turning off the projector. If you touch the  
lamp, you may scald your finger. When you replace the lamp, wait for at least  
45 minutes for the lamp to cool down.  
Do not touch the lamp glass at any time. The lamp may explode due to  
improper handling, including the touching of the lamp glass.  
Lamp lifetime may differ from lamp to lamp and according to the environment  
of use. There is no guarantee of the same lifetime for each lamp. Some lamps  
may fail or terminate their lifetime in a shorter period of time than other similar  
lamps.  
A lamp may explode as a result of vibration, shock or degradation as a result of  
hours of use as its lifetime draws to an end. Risk of explosion may differ  
according to the environment or conditions in which the projector and lamp are  
being used.  
Wear protective gloves and eyeglasses when fixing or detaching the lamp.  
Faster on-off-cycles will damage the lamp and reduce lamp life. Wait at least  
for 5 minutes to turn off the projector after powering on.  
Do not operate the lamp in proximity to paper, cloth, or other combustible  
material nor cover it with such materials.  
Do not operate the lamp in an atmosphere containing an inflammable  
substance, such as thinner.  
Thoroughly ventilate the area or the room when operating the lamp in an  
oxygen atmosphere (in the air). If ozone is inhaled, it could cause headaches,  
nausea, dizziness, and other symptoms.  
The inorganic mercury is involved in the lamp. If the lamp bursts, the mercury  
inside the lamp will be exposed. Leave the area immediately if the lamp  
shatters while being operated and ventilate the area for at least 30 minutes in  
order to avoid the inhalation of mercury fumes. Otherwise it could be harmful to  
user’s health.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
25  
 
1.  
2.  
3.  
4.  
5.  
Turn off the projector.  
If the projector is installed in a ceiling mount, remove it  
Unplug the power cord.  
Loosen the screw in the side of the lamp cover and remove the cover.  
Remove the screws from the lamp module, raise the handle, and lift out the  
module.  
6.  
7.  
8.  
Insert the new lamp module into the projector and tighten the screws.  
Replace the lamp cover and tighten the screw.  
Turn on the projector. If the lamp does not turn on after the warm-up period, try  
reinstalling the lamp.  
9.  
Reset the lamp hour. Refer to the “Setting” menu.  
Dispose the used lamp according to local regulations.  
Ensure that screws are tightened properly. Screws not tightened fully may  
result in injury or accidents.  
Since the lamp is made of glass, do not drop the unit and do not scratch the  
glass.  
Do not reuse the old lamp. This could cause the lamp to explode.  
Be sure to turn off the projector and unplug the AC power cord before  
replacing the lamp.  
Do not use the projector with the lamp cover removed.  
ViewSonic  
PJD6211P  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Display system  
Resolution  
Zoom  
Single 0.55" DLP panel  
XGA (1024 × 768)  
1.1X  
F/No.  
2.51 - 2.69  
Focal length  
Screen size  
Lamp  
21.95 - 24.18mm  
27” – 300”  
180W  
Input terminal  
D-Sub 15-pin x 2, S-VIDEO x 1, VIDEO x 1, Audio signal input  
(3.5 mm stereo mini jack) x 1  
Output terminal  
D-Sub 15 pin x 1, Audio signal output (3.5 mm stereo mini jack) x  
1
Control terminal  
Speaker  
RS-232 x 1, USB x 1  
2 watt x 1  
Video compatibility  
NTSC, NTSC 4.43  
PAL, PAL-N, PAL M  
SECAM, HDTV (480p, 576p, 720p, 1080i/p), Composite video  
Scanning frequency  
Horizontal frequency  
Vertical frequency  
Environment  
31 - 100 KHz  
50 - 120 Hz  
Operating:  
Temperature: 0°C to 40°C  
Humidity: 10%-80%  
Storage:  
Temperature: -20°C to 60°C  
Humidity: 30%-85%  
AC 100-240 V, 50 - 60 Hz, 2.5A  
235W (typical), <1W (Standyby)  
280 x 218 x 114 mm  
2.6 kg (5.7 lbs)  
Power requirement  
Power consumption  
Dimension (W x D x H)  
Weight  
Note: Design and Specifications are subject to change without prior notice.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
27  
 
Appendix  
LED Indicator Messages  
LED Type  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Color  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Blue  
Red  
Red  
Status  
Flash  
Off  
Meaning  
The projector is in standby  
mode.  
Off  
Solid  
Off  
Powering up  
Off  
Solid  
Off  
Normal operation  
Power-down  
Off  
Flash  
Off  
Off  
Solid  
Solid  
Flash  
Flash  
Off  
The projector system has some  
problems with its fans, so the  
projector cannot start up.  
The lamp is in good condition  
and is projecting at maximum  
brightness.  
Off  
Solid  
Solid  
Off  
The lamp has reached its end  
of life and must be changed  
soon. The lamp will continue to  
operate until it fails . Change  
the lamp. If the lamp is off, then  
the ballast will become  
malfunction.  
Power LED  
Lamp LED  
Temp LED  
Blue  
Red  
Red  
Solid  
Flash  
Off  
The projector is shutting and  
the fan motor is cooling the  
lamp for shutdown. Do not  
unplug the power cord or turn  
the power off before the Lamp  
LED changes to flashing. The  
fan motor will turn off when the  
lamp has cooled.  
Power LED  
Lamp LED  
Temp LED  
Power LED  
Lamp LED  
Temp LED  
Blue  
Red  
Red  
Blue  
Red  
Red  
Solid  
Flash  
Off  
Temperature is too high. The  
lamp will turn off. The fan motor  
is cooling the lamp.  
Off  
The lamp ignition failed. If  
temperature is too high, the  
fans will cool the lamp.  
Solid  
Solid  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
28  
   
Compatibility Modes  
Computer:  
Compatibility  
Resolution  
H-Sync [KHz]  
24.6  
31.5  
37.9  
37.5  
43.3  
61.9  
31.5  
37.9  
31.0  
35.2  
37.9  
48.1  
46.9  
53.7  
76.3  
76.3  
48.4  
56.5  
60.0  
68.7  
97.6  
97.6  
67.5  
60.0  
85.9  
64.0  
80.0  
64.7  
75.0  
64.0  
80.0  
64.7  
75.0  
V-Sync [Hz]  
50.0  
59.9  
72.8  
75.0  
85.0  
119.5  
70.0  
85.0  
50.0  
56.0  
60.3  
72.0  
75.0  
85.1  
120.0  
120.0  
60.0  
70.1  
75.0  
85.0  
120.0  
120.0  
75.0  
60.0  
85.0  
60.0  
75.0  
60.0  
75.0  
60.0  
75.0  
60.0  
60.0  
VGA  
640 x 480  
640 x 480 @ 120Hz  
720 x 400  
SVGA  
800 x 600  
800 x 600 @ 120Hz  
1024 x 768  
XGA  
1024 x 768 @ 120Hz  
1152 x 864  
1280 x 960  
SXGA  
1280 x 1024  
1280 x 960  
1280 x 1024  
1440 x 1080  
1600 x 1200  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
29  
 
Video:  
Signal  
Horizontal Frequency (kHz)  
Vertical Frequency (Hz)  
1080i  
1080i  
1080p  
1080p  
720p  
720p  
576p  
576i  
33.8  
28.1  
67.5  
56.3  
45.0  
37.5  
31.3  
15.8  
31.5  
15.8  
60.0  
50.0  
60.0  
50.0  
60.0  
50.0  
50.0  
50.0  
60.0  
60.0  
480p  
480i  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
30  
Troubleshooting  
Refer to the symptoms and measures listed below before sending the projector for  
repairs. If the problem persists, contact your local reseller or service center. Please  
refer to "LED Indicator Messages" as well.  
Start-up problems  
If no lights turn on:  
Be sure that the power cord is securely connected to the projector and the other end  
is plugged into an outlet with power.  
Press the power button again.  
Unplug the power cord and wait for a short while, then plug it in and press the power  
button again.  
Image problems  
If the searching source is displayed:  
Press the SOURCE button on the control panel or the Source button on the remote  
control one or more times to select another active input source.  
Be sure the external source is turned on and connected.  
For a computer connection, ensure your notebook computer’s external video port is  
turned on. Refer to the computer manual.  
If the image is out of focus:  
Be sure the lens cover is removed.  
While displaying the on-screen menu, adjust the focus ring. (The image size should  
not change; if it does, you are adjusting the zoom, not the focus.)  
Check the projection lens to see if it needs cleaning.  
If the image is flickering or unstable for a computer connection:  
Press the Auto button on the remote control.  
Press the MENU button, go to Computer Image and adjust Frequency or  
Tracking.  
Remote control problems  
If the remote control does not operate:  
Be sure nothing is blocking the remote control receiver on the front of the  
projector. Use the remote control within the effective range.  
Aim the remote control at the screen or at the front or back of the projector.  
Move the remote control so it is more directly in front of or behind the projector and  
not as far to the side.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
31  
 
RS-232 Command and Configuration  
Baud Rate:19200 Parity Bit:none  
Data Bit:8 Stop Bit:1 Assign Port:COM1  
Operation  
type  
Header  
Command  
Response  
CRC  
Name  
ON  
OFF  
BE, EF, 10, 05, 00,  
BE, EF, 03, 06, 00,  
C6, FF,  
11, 11, 01, 00, 01, 00  
06  
06  
Power  
DC, DB, 69, 00, 00, 00, 00, 00  
Computer  
(Analog RGB) BE, EF, 03, 19, 00,  
19, 29, 01, 47, 02, CC, CC, 00  
06  
06  
06  
06  
YCbCr  
BE, EF, 03, 19, 00,  
BE, EF, 03, 19, 00,  
BE, EF, 03, 19, 00,  
89, E8, 01, 47, 02, CC, CC, 00  
E8, 69, 01, 47, 02, CC, CC, 00  
78, A8, 01, 47, 02, CC, CC, 00  
S-Video  
Source  
Composite  
Video  
HDTV (Y-Pb- BE, EF, 03, 19, 00,  
Pr)  
DA, 2B, 01, 47, 02, CC, CC, 00  
06  
Menu  
Up  
BE, EF, 02, 06, 00,  
BE, EF, 02, 06, 00,  
BE, EF, 02, 06, 00,  
BE, EF, 02, 06, 00,  
BE, EF, 02, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 02, 06, 00,  
BE, EF, 02, 06, 00,  
BE, EF, 02, 06, 00,  
BE, EF, 02, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
BE, EF, 03, 06, 00,  
E9, D3,  
6D, D2,  
0B, D2,  
DA, D3,  
38, D2,  
EF, DB,  
3E, DA,  
89, DB,  
58, DA,  
57, D0,  
86, D1,  
DF, DF,  
3D, DE,  
10, DB,  
23, DB,  
F2, DA,  
0D, DA,  
6B, DA,  
BA, DB,  
D5, D9,  
04, D8,  
30, 00, 00, 00, 00, 00  
34, 00, 00, 00, 00, 00  
32, 00, 00, 00, 00, 00  
33, 00, 00, 00, 00, 00  
31, 00, 00, 00, 00, 00  
6A, 00, 00, 00, 00, 00  
6B, 00, 00, 00, 00, 00  
6C, 00, 00, 00, 00, 00  
6D, 00, 00, 00, 00, 00  
2E, 00, 00, 00, 00, 00  
2F, 00, 00, 00, 00, 00  
66, 00, 00, 00, 00, 00  
64, 00, 00, 00, 00, 00  
65, 00, 00, 00, 00, 00  
66, 00, 00, 00, 00, 00  
67, 00, 00, 00, 00, 00  
68, 00, 00, 00, 00, 00  
6E, 00, 00, 00, 00, 00  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
06  
OSD  
ECO  
Down  
Left  
Right  
On  
Off  
Auto  
Source  
On  
Off  
Source  
Auto-Sync  
Blank Screen(Video)  
Keystone  
Keystone  
Up  
Down  
Image  
Aspect Ratio  
Factory Reset  
Lamp Hour  
6F, 00, 00, 00, 00, 00 Lamp Hour  
70, 00, 00, 00, 00, 00 Version  
Firmware Version  
System Status  
71, 00, 00, 00, 00, 00 03:Projector  
ON  
(Normal  
Mode)  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
32  
 
D-Sub 9 pin  
Wire List  
COLOR  
Black  
1
2
3
4
5
6
7
8
9
1 CD  
RXD  
TXD  
DTR  
GND  
DSR  
RTS  
CTS  
RI  
C1  
C2  
1
1
2
Brown  
Red  
2
3
3
4
Orange  
Yellow  
Green  
Blue  
4
5
5
6
6
7
7
8
9
Purple  
White  
DW  
8
9
SHELL  
SHELL  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
33  
IR Control Code  
Key  
Power  
Format Byte1 Byte2 Byte3 Byte4  
NEC  
NEC  
NEC  
NEC  
NEC  
NEC  
NEC  
NEC  
NEC  
NEC  
NEC  
NEC  
83  
83  
83  
83  
83  
83  
83  
83  
83  
83  
83  
83  
F4  
F4  
F4  
F4  
F4  
F4  
F4  
F4  
F4  
F4  
F4  
F4  
13  
13  
13  
13  
13  
13  
13  
13  
13  
13  
13  
13  
87  
02  
82  
85  
83  
81  
84  
64  
6B  
63  
80  
8c  
Source  
Up  
Down  
Left  
Right  
MENU  
Auto  
Mouse  
ViewMatch  
Freeze  
Enter /  
Mouse Left  
Exit /  
NEC  
83  
F4  
13  
8d  
Mouse  
Right  
KeyS+  
KeyS-  
NEC  
NEC  
NEC  
83  
83  
83  
F4  
F4  
F4  
13  
13  
13  
86  
8a  
68  
Digital  
Zoom+  
Digital  
Zoom-  
NEC  
83  
F4  
13  
6a  
Volume+  
Volume-  
Mute  
NEC  
NEC  
NEC  
NEC  
83  
83  
83  
83  
F4  
F4  
F4  
F4  
13  
13  
13  
13  
88  
89  
8b  
8f  
Blank  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
34  
 
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
Note : You will need the product serial number.  
T = Telephone  
F = FAX  
Country/Region  
Website  
Email  
AUS= 1800 880 818  
NZ= 0800 008 822  
Australia/New Zealand  
T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533  
F= 1-909-468-3757  
Canada  
Europe  
Hong Kong  
India  
T= 852 3102 2900  
T= 1800 11 9999  
support/call-desk/  
Ireland (Eire)  
Korea  
T= 080 333 2131  
T= 0800-4441185  
T= 1230-020-7975  
T= 01800-9-157235  
T= 001-8882328722  
Latin America  
(Argentina)  
Latin America (Chile)  
Latin America  
(Columbia)  
Latin America (Mexico)  
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS  
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16  
Latin America (Peru)  
Macau  
ap.viewsonic.com/me/  
T= 0800-54565  
T= 853 2870 0303  
Contact your reseller  
Middle East  
T= 1-800-688-6688 (English)  
T= 1-866-379-1304 (Spanish)  
F= 1-909-468-3757  
Puerto Rico & Virgin Islands www.viewsonic.com  
T= 65 6461 6044  
South Africa  
ap.viewsonic.com/za/  
Contact your reseller  
support/call-desk/  
United Kingdom  
T (Toll-Free)= 1-800-688-6688  
T (Toll)= 1-424-233-2530  
F= 1-909-468-3757  
United States  
ViewSonic  
PJD6211P  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
®
VIEWSONIC PROJECTOR  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal  
use, during the warranty period. If a product proves to be defective in material or workmanship during  
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.  
Replacement product or parts may include remanufactured or refurbished parts or components.  
Limited Three (3) year General Warranty  
Subject to the more limited one (1) year warranty set out below, North and South America: Three (3) years  
warranty for all parts excluding the lamp, three (3) years for labor, and one (1) year for the original lamp  
from the date of the first consumer purchase; Europe except Poland: Three (3) years warranty for all parts  
excluding the lamp, three (3) years for labor, and ninety (90) days for the original lamp from the date of  
the first consumer purchase; Poland: Two (2) years warranty for all parts excluding the lamp, two (2) years  
for labor, and ninety (90) days for the original lamp from the date of the first consumer purchase.  
Limited One (1) year Heavy Usage Warranty:  
Under heavy usage settings, where a projector’s use includes more than four (4) hours average daily  
usage, North and South America: One (1) year warranty for all parts excluding the lamp, one (1) year for  
labor, and ninety (90) days for the original lamp from the date of the first consumer purchase; Europe:  
One (1) year warranty for all parts excluding the lamp, one (1) year for labor, and ninety (90) days for  
the original lamp from the date of the first consumer purchase.  
Other regions or countries: Please check with your local dealer or local ViewSonic office for the  
warranty information.  
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s  
installed lamp only. All accessory lamps purchased separately are warranted for 90 days.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration, failure, or malfunction resulting from:  
a. Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, improper  
maintenance, unauthorized product modification, or failure to follow instructions supplied  
with the product.  
b. Operation outside of product specifications.  
c. Operation of the product for other than the normal intended use or not under normal conditions.  
d. Repair or attempted repair by anyone not authorized by ViewSonic.  
e. Any damage of the product due to shipment.  
f. Removal or installation of the product.  
g. Causes external to the product, such as electric power fluctuations or failure.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
36  
h. Use of supplies or parts not meeting ViewSonic’s specifications.  
i. Normal wear and tear.  
j. Any other cause which does not relate to a product defect.  
3. Removal, installation, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer Support  
(please refer to “Customer Support” page). You will need to provide your product’s serial number.  
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name,  
(c) your address, (d) a description of the problem, and (e) the serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service  
center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein  
including the implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not  
be liable for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,  
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,  
interference with business relationships, or other commercial loss, even if advised of the possibility  
of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary from state  
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of  
incidental or consequential damages, so the above limitations and exclusions may not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,  
contact ViewSonic or your local ViewSonic dealer.  
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is  
subject to the terms and conditions of the Maintenance Guarantee Card.  
com under Support/Warranty Information.  
4.3: Projector Warranty  
PRJ_LW01 Rev. 1h 06-25-07  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
37  
Mexico Limited Warranty  
®
VIEWSONIC PROJECTOR  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the  
warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic  
will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include  
remanufactured or refurbished parts or components & accessories.  
How long the warranty is effective:  
3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase.  
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only.  
All accessory lamps purchased separately are warranted for 90 days.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification,  
unauthorized attempted repair, or failure to follow instructions supplied with the product.  
b. Any damage of the product due to shipment.  
c. Causes external to the product, such as electrical power fluctuations or failure.  
d. Use of supplies or parts not meeting ViewSonic’s specifications.  
e. Normal wear and tear.  
f. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is  
displayed on the product for an extended period of time.  
4. Removal, installation, insurance, and set-up service charges.  
How to get service:  
For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the  
attached Customer Support page). You will need to provide your product’s serial number, so please record the product  
information in the space provided below on your purchase for your future use. Please retain your receipt of proof of  
purchase to support your warranty claim.  
For Your Records  
Product Name: ________________________  
Document Number: ____________________  
Purchase Date: ________________________  
Model Number: __________________________  
Serial Number: ___________________________  
Extended Warranty Purchase? _______________(Y/N)  
If so, what date does warranty expire? _________  
1. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c)  
your address, (d) a description of the problem, and (e) the serial number of the product.  
2. Take or ship the product in the original container packaging to an authorized ViewSonic service center.  
3. Round trip transportation costs for in-warranty products will be paid by ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein including the  
implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of  
the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business  
relationships, or other commercial loss, even if advised of the possibility of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
4. Repair or attempted repair by anyone not authorized by ViewSonic.  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
38  
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico:  
Name, address, of manufacturer and importers:  
México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas,  
Col. San Fernando Huixquilucan, Estado de México  
NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004  
Hermosillo:  
Villahermosa:  
Distribuciones y Servicios Computacionales SA de CV.  
Calle Juarez 284 local 2  
Col. Bugambilias C.P: 83140  
Tel: 01-66-22-14-9005  
Puebla, Pue. (Matriz):  
Compumantenimietnos Garantizados, S.A. de C.V.  
AV. GREGORIO MENDEZ #1504  
COL, FLORIDA C.P. 86040  
Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09  
Veracruz, Ver.:  
RENTA Y DATOS, S.A. DE C.V. Domicilio:  
29 SUR 721 COL. LA PAZ  
72160 PUEBLA, PUE.  
CONEXION Y DESARROLLO, S.A DE C.V. Av. Americas # 419  
ENTRE PINZÓN Y ALVARADO  
Fracc. Reforma C.P. 91919  
Tel: 01(52).222.891.55.77 CON 10 LINEAS  
Chihuahua  
Tel: 01-22-91-00-31-67  
Cuernavaca  
Soluciones Globales en Computación  
C. Magisterio # 3321 Col. Magisterial  
Chihuahua, Chih.  
Tel: 4136954  
Distrito Federal:  
Compusupport de Cuernavaca SA de CV  
Francisco Leyva # 178 Col. Miguel Hidalgo  
C.P. 62040, Cuernavaca Morelos  
Tel: 01 777 3180579 / 01 777 3124014  
Guadalajara, Jal.:  
QPLUS, S.A. de C.V.  
SERVICRECE, S.A. de C.V.  
Av. Coyoacán 931  
Av. Niños Héroes # 2281  
Col. Del Valle 03100, México, D.F.  
Tel: 01(52)55-50-00-27-35  
E-Mail : [email protected]  
Col. Arcos Sur, Sector Juárez  
44170, Guadalajara, Jalisco  
Tel: 01(52)33-36-15-15-43  
Monterrey:  
Guerrero Acapulco  
GS Computación (Grupo Sesicomp)  
Progreso #6-A, Colo Centro  
39300 Acapulco, Guerrero  
Tel: 744-48-32627  
Global Product Services  
Mar Caribe # 1987, Esquina con Golfo Pérsico  
Fracc. Bernardo Reyes, CP 64280  
Monterrey N.L. México  
Tel: 8129-5103  
Oaxaca, Oax.:  
MERIDA:  
ELECTROSER  
CENTRO DE DISTRIBUCION Y  
SERVICIO, S.A. de C.V.  
Murguía # 708 P.A., Col. Centro, 68000, Oaxaca  
Tel: 01(52)95-15-15-22-22  
Av Reforma No. 403Gx39 y 41  
Mérida, Yucatán, México CP97000  
Tel: (52) 999-925-1916  
Fax: 01(52)95-15-13-67-00  
FOR USA SUPPORT:  
Tijuana:  
STD  
ViewSonic Corporation  
Av Ferrocarril Sonora #3780 L-C  
Col 20 de Noviembre  
Tijuana, Mexico  
381 Brea Canyon Road, Walnut, CA. 91789 USA  
Tel: 800-688-6688 (English); 866-323-8056 (Spanish);  
Fax: 1-800-685-7276  
4.3: ViewSonic Mexico Limited Warranty  
PRJ_LW03 Rev. 1A 06-25-07  
ViewSonic  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PJD6211P  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Tech Craft TV Video Accessories BCE60 User Manual
Technicolor Thomson Flat Panel Television 32LM051B6 User Manual
Tekkeon Battery Charger MP3450 10 User Manual
Toshiba Blu ray Player BDX2250KU User Manual
Toshiba IP Phone iES16 User Manual
Toshiba Power Supply 1600 XP UPS User Manual
Tripp Lite Power Supply APSX750F User Manual
Universal Smoke Alarm 1422 User Manual
Vizio TV Mount XMT500 User Manual
Watlow Electric Heating System Freeflex User Manual