ViewSonic Car Video System VS15006 User Manual

VSD221  
Smart Display  
User Guide  
Model No. VS15006  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Canada Statement  
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is  
subject to the following two conditions: (1) this device may not cause interference, and (2)  
this device must accept any interference, including interference that may cause undesired  
operation of the device.  
Caution: Exposure to Radio Frequency Radiation  
To comply with RSS 102 RF exposure compliance requirements, a separation distance of  
at least 20 cm must be maintained between the antenna of this device and all persons.  
Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de  
séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes  
les personnes.  
CE Conformity for European Countries  
The device complies with the EMC Directive 2004/108/EC and Low Voltage  
Directive 2006/95/EC, R&TTE Directive 1999/5/EC.  
Following information is only for EU-member states:  
The mark shown to the right is in compliance with the Waste Electrical and  
Electronic Equipment Directive 2002/96/EC (WEEE).  
The mark indicates the requirement NOT to dispose the equipment as unsorted  
municipal waste, but use the return and collection systems according to local law.  
If the batteries, accumulators and button cells included with this equipment,  
display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a  
heavy metal content of more than 0.0005% Mercury, or more than 0.002%  
Cadmium, or more than 0.004% Lead.  
European Union Regulatory Conformance  
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council  
Recommendation of 12 July 1999 on the limitation of exposure of the general public to  
electromagnetic fields (0-300 GHz). This equipment meets the following conformance  
standards: EN301489-1, EN301489-17, EN55022/24, EN60950-1, EN300328.  
We, hereby, declare that this Wi-Fi & Bluetooth radio is in compliance with the essential  
requirements and other relevant provisions of Directive 1999/5/EC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ii  
Declaration of RoHS2 Compliance  
This product has been designed and manufactured in compliance with Directive 2011/65/  
EU of the European Parliament and the Council on restriction of the use of certain  
hazardous substances in electrical and electronic equipment (RoHS2 Directive) and  
is deemed to comply with the maximum concentration values issued by the European  
Technical Adaptation Committee (TAC) as shown below:  
Proposed Maximum  
Concentration  
Substance  
Actual Concentration  
Lead (Pb)  
Mercury (Hg)  
Cadmium (Cd)  
Hexavalent Chromium (Cr6+)  
Polybrominated biphenyls (PBB)  
Polybrominated diphenyl ethers  
(PBDE)  
0.1%  
0.1%  
0.01%  
0.1%  
< 0.1%  
< 0.1%  
< 0.01%  
< 0.1%  
< 0.1%  
0.1%  
0.1%  
< 0.1%  
Certain components of products as stated above are exempted under the Annex III of the  
RoHS2 Directives as noted below:  
Examples of exempted components are:  
1. Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps  
(CCFL and EEFL) for special purposes not exceeding (per lamp):  
(1) Short length (500 mm): maximum 3.5 mg per lamp.  
(2) Medium length (500 mm and 1,500 mm): maximum 5 mg per lamp.  
(3) Long length (1,500 mm): maximum 13 mg per lamp.  
2. Lead in glass of cathode ray tubes.  
3. Lead in glass of fluorescent tubes not exceeding 0.2% by weight.  
4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.  
5. Copper alloy containing up to 4% lead by weight.  
6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by  
weight or more lead).  
7. Electrical and electronic components containing lead in a glass or ceramic other than  
dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic  
matrix compound.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
Important Safety Instructions  
1. DO NOT place objects on top of the device, as objects may scratch the screen.  
2. DO NOT expose the device to dirty or dusty environments.  
3. DO NOT place the device on an uneven or unstable surface.  
4. DO NOT insert any foreign objects into the device.  
5. DO NOT expose the device to strong magnetic or electrical field.  
6. DO NOT expose the device to direct sunlight as it can damage the LCD Screen. Keep  
it away from heat sources.  
7. DO NOT use the device in the rain.  
8. Please check with your Local Authority or retailer for proper disposal of electronic  
products.  
9. The device and the adapter may produce some heat during normal operation or  
charging. To prevent discomfort or injury from heat exposure, DO NOT leave the  
device on your lap.  
10. POWER INPUT RATING: Refer to the rating label on the device and be sure that  
the power adapter complies with the rating. Only use accessories specified by the  
manufacturer.  
11. DO NOT use a pen or any sharp object to tap the screen.  
12. Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly before  
cleaning. Never use abrasives or cleaning solutions.  
13. Always power off the device to install or remove external devices that do not support  
hot-plug.  
14. Disconnect the device from an electrical outlet and power off before cleaning the  
device.  
15. DO NOT disassemble the device. Only a certified service technician should perform  
repair.  
16. The device has apertures to disperse heat. DO NOT block the device ventilation, the  
device may become hot and malfunction as a result.  
17. Users have to use the connection to USB interfaces with USB 2.0 version or higher.  
18. PLUGGABLE EQUIPMENT: the socket-outlet shall be installed near the equipment  
and shall be easily accessible.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
Copyright Information  
Copyright © ViewSonic® Corporation, 2013. All rights reserved.  
Android™ is a trademark of Google Inc. Use of this trademark is subject to Google  
Permissions.  
This product has an Android™ platform based on Linux, which can be expanded by a  
variety of JME-based application SW.  
All products used in this device and trademarks mentioned herein are trademarks or  
registered trademarks of their respective owners.  
Google™, the Google logo, Android™, the Android logo and Gmail™ are trademarks of  
Google Inc. Use of this trademark is subject to Google Permissions.  
Wi-Fi and the Wi-Fi CERTIFIED logo are registered trademarks of the Wireless Fidelity  
Alliance.  
microSD™ is a trademark of SD Card Association.  
Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.Java,  
JME and all other Java-based marks are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and other countries.  
is a trademark of SRS Labs, Inc. SRS® 3D technology is incorporated under license  
from SRS Labs, Inc. SRS® 3D restores the original three-dimensional sound field of stereo  
recordings by retrieving spatial information buried in the recordings to create an immersive  
3D sound-field using only two speakers or headphones.  
The actual included applications (apps) may differ from the illustrated screen shots.  
VESA® is a registered trademark of the Video Electronics Standards Association. DPMS  
and DDC are trademarks of VESA®.  
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors  
or omissions contained herein; nor for incidental or consequential damages resulting  
from furnishing this material, or the performance or use of this product.In the interest of  
continuing product improvement, ViewSonic Corporation reserves the right to change  
product specifications without notice. Information in this document may change without  
notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for  
any purpose without prior written permission from ViewSonic Corporation.  
Intellectual Property Right Information  
Right to all technologies and products that comprise this device are the property of their  
respective owners:  
This product has an Android platform based on Linux, which can be expanded by a variety  
of Java-Script-based application SW.  
Google, the Google logo, Android, the Android logo, Gmail, and YouTube are trademarks  
of Google Inc.Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG,  
Inc.Java, JME and all other Java-based marks are trademarks or registered trademarks of  
Sun Microsystems, Inc. in the United States and other countries.microSD is a trademark  
of SD Card Association.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v
Product Registration  
To meet your future needs, and to receive any additional product information as it  
For Your Records  
Product Name:  
VSD221  
ViewSonic Smart Display  
VS15006  
VSD221_UG_ENG Rev. 1B 06-28-13  
_______________________________  
_______________________________  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
Product disposal at end of product life  
ViewSonic respects the environment and is committed to working and living green. Thank  
you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn  
more.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi  
Table of Contents  
Table of Contents  
1 VSD221 Smart Display Features  
1.1 Installing wall mount bracket .............................................. 3  
2 Set Up Your VSD221 Smart Display  
2.1 Connection ......................................................................... 4  
2.2 Get Your Smart Display Ready for Use.............................. 4  
2.3 Turn On Your Device .......................................................... 6  
2.4 Turn Off Your Device .......................................................... 6  
3 About Your VSD221 Smart Display  
3.1 Touch Screen ..................................................................... 7  
3.2 Applications, Widgets and Shortcuts.................................. 7  
3.3 Home Screen ..................................................................... 8  
3.4 Navigation buttons............................................................ 10  
3.5 Notifications and Status.....................................................11  
3.5.1 Managing Notifications .........................................11  
3.5.2 Status Detail .........................................................11  
3.6 Customizing Your Home Screen ...................................... 12  
3.6.1 Add an Item (Shortcut) ........................................ 12  
3.6.2 Move an Item ...................................................... 12  
3.6.3 Delete an Item .................................................... 12  
3.6.4 Change the Wallpaper ........................................ 12  
3.7 Navigating the Applications .............................................. 13  
3.7.1 Apps screen......................................................... 13  
3.7.2 Application Shortcuts........................................... 14  
3.7.3 Recent Applications............................................. 14  
3.7.4 Screen Lock Wallpaper........................................ 15  
4 Using Your VSD221 Smart Display  
4.1 Managing Contacts .......................................................... 16  
4.1.1 Add a new contact............................................... 16  
4.1.2 Find a contact...................................................... 17  
4.1.3 E-mail or send a message to a contact ............... 17  
4.2 Pop-up Menu.................................................................... 19  
4.3 Google Search ................................................................. 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vii  
Table of Contents  
4.4 Managing Your Device Settings ....................................... 21  
4.4.1 Check storage spaces......................................... 21  
4.4.2 Remove the SD card safely................................. 21  
4.4.3 Erase all data from your device........................... 22  
4.5 Connecting to HDMI-compliant Devices via Micro HDMI  
Input ................................................................................. 22  
4.6 Bluetooth Connection....................................................... 23  
4.6.1 Turn on Bluetooth and make the device  
discoverable ........................................................ 24  
4.6.2 Pair with a Bluetooth device ................................ 24  
4.6.3 Terminate a pairing partnership........................... 25  
4.6.4 Change your device’s Bluetooth name................ 25  
5 Internet  
5.1 Connecting to the Internet................................................ 26  
5.1.1 Wi-Fi connection.................................................. 26  
5.1.2 Check the current Wi-Fi network connection....... 27  
5.1.3 Connect to another Wi-Fi network....................... 27  
5.2 Synchronizing Your Google Data ..................................... 28  
5.3 Video Chat........................................................................ 28  
6 Customizing Your VSD221 Smart Display  
6.1 Display Settings................................................................ 30  
6.2 Sound and Ringtone Settings........................................... 30  
6.2.1 System settings ................................................... 31  
6.2.2 Notifications settings............................................ 31  
6.3 Date, Time, and Time Zone.............................................. 31  
6.4 Language & Input Settings............................................... 32  
6.5 OSD Settings.................................................................... 33  
6.5.1 Adjustment Bars .................................................. 33  
6.5.2 Functions Buttons................................................ 33  
6.5.3 OSD Notice.......................................................... 34  
7 Protecting Your VSD221 Smart Display  
7.1 Protect Your Device Data with a Screen Unlock Pattern.. 35  
7.1.1 Create a screen unlock pattern ........................... 35  
7.1.2 Change unlock pattern settings........................... 36  
7.2 Disable the screen unlock security................................... 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
viii  
Table of Contents  
7.3 Protect Your Device Data with a PIN................................ 36  
7.3.1 Disable or change PIN......................................... 37  
7.4 Protect Your Device Data with a Password...................... 37  
7.4.1 Disable or change the password ......................... 37  
7.5 Power Saving Feature...................................................... 38  
7.6 Power Management Information ...................................... 38  
8 Troubleshooting  
8.1 Touch Screen Problems ................................................... 39  
8.2 Messaging Problems........................................................ 39  
8.3 Other Problems ................................................................ 40  
9 Appendix  
Specification ............................................................................. 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ix  
VSD221 Smart Display Features  
1 VSD221 Smart Display Features  
This section introduces you to the features of your Smart Display.  
NOTE  
• The features or applications described in this User’s manual may vary depending on the  
device model purchased.  
Front View  
9
1
8
7
2
6
5
4 3  
No. Components  
Descriptions  
Used for receiving audio or audio input.  
Microphone  
1
USB Ports x 2  
Used for keyboard, mouse, Flash Disk or printer  
connections.  
2
Power Button  
Press and hold to power on/off the device.  
3
- Press and Hold about 2-3 seconds to turn on the  
power (green light)  
- Press about 0.5 seconds to let the system enter the  
power saving mode (sleep mode - orange light) or  
wake up the system from the power saving mode.  
- Press about 3-4 seconds to pop-up a system  
shutdown or not dialog screen.  
- Press about 10 seconds to force the system shutdown.  
LED Indicator  
Speaker  
Indicates the status of power. (power on, off or power  
saving)  
4
Audio output.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
VSD221 Smart Display Features  
No. Components  
Descriptions  
Connect to earphone or headset.  
Earphone Jack  
6
Micro USB Port Connect to windows computer for data transferring.  
(Need MTP driver)  
7
Touch Screen  
Touch the screen to control the on-screen configurations  
including menu items, applications, buttons, keyboard  
and so on.  
8
9
Front-Panel  
Camera  
- Used for taking a front picture just the same as a self-  
portrait.  
- Used for making video calls with supportive web  
applications, such as Google talk.  
Back View  
5
1
4
2
3
No. Components  
Descriptions  
LAN Connector  
DC Jack  
Connect to a RJ45 cable for network connection  
1
2
3
Connect to power adapter.  
Back  
Compartment  
Open the compartment cover on the back of the smart  
display to connect power adapter, LAN cable, HDMI  
cable and insert the SD card.  
SD Card Slot  
Micro HDMI  
Input micro SD card to extend storage capacity.  
4
Connect to digital high quality device for video and  
audio configurations (e.g. DVD Player, BD Player VPG  
or Notebook).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
VSD221 Smart Display Features  
1.1 Installing wall mount bracket  
The VSD221 supports wall mount bracket installation. We recommend using  
mounting interface that comply with Video Electronics Standards Association  
(VESA®) standard. Please follow the steps to install your bracket:  
Turn off your monitor and unplug its power cord.  
1
Lay the monitor face-down on a flat surface. Take care to protect the  
screen.  
2
Remove the screws for wall mount and then remove the cover plate.  
3
Align the wall mount bracket with the holes which are compliant  
4
with VESA® standard mounting hole pattern 100mmx100mm in the  
mounting pad and secure it with the four screws supplied with the arm-  
type base, wall mount hanger or other base.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Set Up Your VSD221 Smart Display  
2 Set Up Your VSD221 Smart Display  
2.1 Connection  
Keyboard  
Printer  
External Computer  
HDMI  
SD  
LAN  
Power  
Mouse  
USB Storage  
Internet  
Earphone  
Notebook  
SD Card  
Outliet  
Bluetooth Devices  
Wi-Fi Devices  
2.2 Get Your Smart Display Ready for Use  
Insert the SD card  
Open the compartment cover on the  
back of the smart display.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Set Up Your VSD221 Smart Display  
Insert a micro SD card if desired and/  
or available.  
2
Connect the Power Cord  
Open the compartment cover on the back of the smart display.  
1
2
Connect the included power cord to  
the power jack.  
Connect the other end of the power cord to a suitable power outlet.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Set Up Your VSD221 Smart Display  
2.3 Turn On Your Device  
Press and hold power button about 1-2 seconds  
Slide the lock icon to unlock the screen  
After connecting the power cord, you can press and hold the power  
button about 1-2 seconds on the lower right corner to power on your  
device.  
1
Once powered-up, the LED indicator will show solid Green.  
The lock screen will appear after a short boot-up period.  
Touch and slide the lock icon to unlock the screen.  
2
3
4
5
The device is ready for use when the Home screen is displayed.  
2.4 Turn Off Your Device  
Press and hold the power button more than 4 seconds.  
1
When the power off menu appears, touch OK.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
About Your VSD221 Smart Display  
3 About Your VSD221 Smart Display  
3.1 Touch Screen  
The main way to control the device is using your finger to touch the sensitive  
surface of the screen directly. You can manipulate icons, buttons, menu  
items, on-screen keyboard and other items on the touch screen with below  
methods:  
Methods  
Descriptions  
Touch  
Simply touch the items with you finger.  
- Act on items on the screen including application and settings  
icons.  
- Type letters and symbols using the on-screen keyboard  
- Press the on-screen buttons  
Touch and  
Hold  
Touch and hold an item on the screen by touching it without  
lifting your finger until an action occurs.  
Drag  
Touch and hold an item then move the item with your finger until  
reaching the target position.  
- Move an item on the screen.  
- Scroll through Home screens, web pages, lists, entries, photo  
thumbnails, contacts and so on.  
Swipe or Slide Quickly move your finger across the surface of the screen  
without pausing when you first touch it.  
Zoom Out  
Move two fingers close together on the screen to reduce the  
view of an image or web page.  
Zoom In  
Move two fingers apart on the screen to enlarge the view of an  
image or web page.  
3.2 Applications, Widgets and Shortcuts  
The soft buttons or icons offer a variety of functions and shortcuts. On the  
Home screen, it is your starting point to access all the features on your  
device. It displays application icons, widgets, shortcuts and so on.  
Applications: Software allows you to perform a specific task. Power on your  
device, it is preloaded with a variety of applications already. You can also  
download additional applications from the Google Play Store.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
About Your VSD221 Smart Display  
Widgets: Widgets are applications that you can use directly on the Home  
screen. Example: Analog clock, Bookmark, Picture frame, the Google search  
bar and so on.  
Shortcuts: A link that you can create on your Home screen to provide  
quicker access to applications you have installed.  
3.3 Home Screen  
Once you power on your device, and unlock your screen, the central Home  
screen will display. You can also touch the  
Home button to go to Home  
screen. On the Home screen, it allows you to access all the features installed  
in your device.  
The Home screen is composed of five screen panels. You can slide your  
finger to left or right across the central Home screen to view more widgets,  
shortcuts, and other items located on each screen panel. You can also add  
shortcuts, widgets or change the desktop wallpaper on each screen panel.  
13  
12  
11  
10  
9
1
2
8
3 4 5 6  
7
No.  
Items  
Descriptions  
Google  
Search  
Use the Google Search application to search  
the web faster and easier from Google.  
1
Google  
Located at the bottom of the Home screen, it  
includes Back, Home, Recent Applications,  
OSD configurations, Screenshot, Time,  
Bluetooth, WiFi and other functions.  
2
System bar  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
About Your VSD221 Smart Display  
No.  
Items  
Descriptions  
3
Return to the previous screen or option.  
Back  
This button will indicate you to go back to  
central Home screen at any time.  
4
Home  
Touch this button to show you a list of images  
about the applications you have accessed  
recently. You can touch the listed image to  
open the applications.  
Recent  
Applications  
5
Touch this to open screen display related  
configurations including Volume, Brightness,  
Contrast, SRS, HDMI and restore to Default  
values and so on.  
OSD can only be operated with touch screen  
and will not respond to mouse input.  
6
OSD  
Time  
7
Display the current time.  
9:03  
Touch Bluetooth button on the right of system  
bar to pop-up current system configuration  
screen. In the configuration screen, you can:  
- Configure Wi-Fi  
8
Bluetooth  
- Review all items in the Settings  
- Configure Notifications to enable or disable  
- Magnify the Time viewing  
To add a shortcut or widget to the Home  
screen, touch and hold the icon you want  
to add. The icon will appear on the Home  
screen. Drag it to a suitable place.  
Home  
screen  
9
You can add a shortcut button to the Home  
screen by touching and holding the specified  
icon. This icon allows you to open a shortcut  
item quickly.  
10  
Shortcuts  
Touch the Apps button to show all of the  
applications installed on your device.  
11  
Apps  
Widgets are small applications that reside on  
the Home screen to provide quick access to  
information.  
12  
Widgets  
Use voice input as an alternative to text entry  
via keyboard.  
13  
14  
Voice Input  
Navigation  
Flick or drag the screen horizontally until the  
desired Home screen is displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
About Your VSD221 Smart Display  
3.4 Navigation buttons  
On the left of system bar, you can find the navigation buttons described as  
below:  
Buttons  
Descriptions  
In the OSD configuration screen, drag the slider bar  
to adjust Volume, Brightness and Contrast to your  
OSD. Here you can also configure the SRS and HDMI  
functions, or touch Default to restore the factory default  
values.  
OSD  
A short-cut way for you to open recent applications you  
have accessed. Select and touch one of the images from  
the list to open the application directly.  
Recent Apps.  
Home  
- Touch this button to go to the central Home screen  
when viewing other Home screens.  
- Touch this button to go back to the last Home screen  
you have viewed when launching any functions on the  
device. Or touch this button again to go back to central  
Home screen.  
- Touch this button to go back to the previous screen or  
option.  
Back  
- If the on-screen keyboard is displayed, the button  
changes to  
keyboard.  
. Touch it to close the on-screen  
Screehshot  
Tap this button to capture an image of your screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
About Your VSD221 Smart Display  
3.5 Notifications and Status  
The right side of the system bar displays current time and status buttons.  
Area  
Descriptions  
Time area  
Displays the current time.  
Notification button informs you of new e-mail, messages  
and so on. Touch it for viewing.  
Notification area  
Status area  
Show you the current state of your device just like  
network connections.  
3.5.1 Managing Notifications  
You can touch Time area to pop-up status  
configuration screen to disable/enable the  
Notification function. Or touch the notification  
button directly to view the information.  
Touch notification button to view the detail.  
• Swipe left or right on the notification message to remove it.  
Touch Time area to view all current notifications  
3.5.2 Status Detail  
You can touch Time area to pop-up status  
Detail screen to configure device settings and  
Wi-Fi. And touch any other area of the screen  
to close the Status Detail.  
• View the detail about date and time  
• View the state of network connections  
Touch Settings to open Settings configuration screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
About Your VSD221 Smart Display  
3.6 Customizing Your Home Screen  
3.6.1 Add an Item (Shortcut)  
Touch the Home button to go back the central Home screen  
• Drag on the screen horizontally to select a Home screen where you want  
to add the item.  
Touch the Apps button  
located on the upper right corner of your  
screen.  
• On the Apps screen, touch APPS or WIDGETS tab to enter APPS or  
WIDGETS configuration screen.  
• Select one of APPS or WIDGETS item that you want to add.  
Touch and hold the item to add it onto the selected Home screen.  
NOTE  
Touch and hold a newly added item on the selected Home screen without lifting your  
finger to drag it to any place you want on the Home screen.  
3.6.2 Move an Item  
• On the Home screen, touch and hold the item that you want to move.  
• The screen will soon display the shape of the item to indicate that it can be  
repositioned.  
• Move the item to the specified position.  
• Then release your finger to add the item to the new position.  
3.6.3 Delete an Item  
• On the Home screen, touch and hold the item that you want to delete such  
as a widget or shortcut.  
• An X” will soon be displayed at the top of the Home screen.  
• Drag the item over the “X”.  
• Then release your finger to delete the item.  
3.6.4 Change the Wallpaper  
• Long Touch (touch and hold) an empty  
space on the screen.  
• A Choose wallpaper from” configuration  
screen will appear.  
• Select one of the wallpaper sources by  
touching the specified icon.  
• (Wallpaper sources: Gallery, Live Wallpapers and Wallpapers)  
Tap on the desired wallpaper image. You can always exit by tapping  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
About Your VSD221 Smart Display  
• Once finishing the wallpaper selection, touch “Set wallpaper” to renew the  
wallpaper of Home screen.  
• Some wallpapers allow you to change the wallpaper color, ex. Magic  
Smoke. If “Settings…” displays during the changing wallpaper, touch it  
and on the top of screen, will display “Tap to change”, touch the screen to  
configure the wallpaper color. Tap the screen to cycle through the different  
colors.  
You can touch Back button to go back previous screen without renew any  
changed settings.  
NOTE  
• All Home Screens share the same background. You cannot set different wallpapers for  
individual Home Screen panels.  
3.7 Navigating the Applications  
You can find applications available on your device in the All Apps menu:  
3.7.1 Apps screen  
Open the Apps screen  
You can access Apps screen from any  
Home screen by touching the Apps button  
located on the upper right corner of your  
screen. The Apps screen contains all of the  
applications installed on the device including  
those you have downloaded.  
Navigate pages of applications  
Flick the Apps screen horizontally and touch an application to launch it.  
Close the Apps Screen  
Touch the Home button on the system bar to go back the central Home  
screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
About Your VSD221 Smart Display  
3.7.2 Application Shortcuts  
To quickly launch applications on the Home  
screen, you can add shortcuts for frequently-  
used application to the Home screen.  
For more information, please refer to 3.6  
Customizing Your Home Screen.  
Use the shortcut to open an application  
Touch the Home button on the system bar.  
1
If the desired application shortcut displays on the Home screen, touch  
the shortcut to launch the application.  
2
3.7.3 Recent Applications  
Open a recently used application  
Touch the Recent Applications button  
to view the recently used applications.  
1
Scroll the list of recently used applications, and touch the desired  
application thumbnail to launch the application.  
2
Tap the Back button  
to close the Recent Applications list.  
3
4
Slide your finger horizontally across any one of the applications to  
remove it from the Recent Applications list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
About Your VSD221 Smart Display  
3.7.4 Screen Lock Wallpaper  
You can set the display to turn off automatically after a timeout period of  
inactivity, or turn it off manually by pressing the power button. When you  
press the power button to wake up the display, the screen lock wallpaper  
appears to avoid unintentional touch of the screen. When the screen lock  
wallpaper appears, touch and hold the lock icon, drag it to the edge of the  
larger circle that surrounds it to unlock the screen. Refer to 2.3 Turn On Your  
Device.  
NOTE  
• Set the duration of screen to remain on before entering sleeping mode, touch the Home  
button│Apps button│Settings│Display│Sleep.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Using Your VSD221 Smart Display  
4 Using Your VSD221 Smart Display  
4.1 Managing Contacts  
Touch Home button│Apps button│People to view and manage your contacts.  
4.1.1 Add a new contact  
Touch  
New.  
1
2
Select the account where you want to add this contact, such as your  
Gmail account.  
• This area shows the account in which the new contact is stored.  
Take photo: Touch to take a photo to use as the contact’s visual call-  
er ID.  
• Select photo from Gallery: Touch to select a photo from the Gallery  
application to use as the contact’s visual caller ID.  
• Enter the contact information using the on-screen keyboard. You can  
tap on the “Add another field” tab to add more information.  
Touch to replace a default information label with another label that  
you can choose from the list. For example, you can change the label  
from Home phone number to Mobile phone number.  
Touch to add a new item to the current information category. For ex-  
ample, you can add a second phone number.  
Touch to remove an item from the current information category  
Touch to fill more information about the contact.  
Touch to display more options.  
Touch Cancel to return to your Contacts list.  
Touch Done to save the new contact to your Contacts list.  
Touch to return to your Contacts list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Using Your VSD221 Smart Display  
4.1.2 Find a contact  
To locate a contact, you can either:  
1
• Flick the All tab contacts list on the up-  
per left of screen until you find the con-  
tact. Or, drag the scroll bar on the left  
of the screen to scroll through the con-  
tacts list.  
Touch Find contacts on the upper  
right of screen, and then type either the  
contact’s full name or only the first let-  
ters of it into the text box. The screen  
displays the matching contacts.  
Once the contact is located, touch the contact’s entry to view the  
contact’s details.  
2
4.1.3 E-mail or send a message to a contact  
On the contacts list, find a desired contact.  
1
Touch the contact entry to view the contact details, and then touch to  
send e-mail using the e-mail accounts you have set up on your device,  
or touch it to send a message.  
2
Edit a contact  
On the contacts list, find a desired contact.  
1
Touch the contact entry to view the contact details.  
2
Touch  
to edit the contact details.  
3
4
Touch Done to save the changes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Using Your VSD221 Smart Display  
Share a contact  
On the contacts list, find a desired  
contact.  
1
Touch the contact entry to view the contact details.  
2
Touch the Menu button on the upper right of screen, then select  
3
Share contact.  
From the Share contact via menu that appears, select the way you  
want to share the contact information with your friends, such as  
through Bluetooth or Gmail.  
4
Join contacts  
Since your device can synchronize with a  
variety of accounts, when synchronizing con-  
tacts from these accounts with your device,  
you may have multiple contacts for the same  
person. Joining contacts allows you to view  
all the contact’s numbers, addresses, and so  
on, in one single contact entry.  
On the Contacts list, find a desired contact.  
1
Touch the contact entry to view the contact details, and then touch Edit  
2
on the upper right of the screen.  
Then, touch the Menu button on the upper right of the screen│Join.  
3
From the Join contacts list, touch another contact to link, and then  
touch Done. The joined contact’s information is displayed with the  
original Contacts settings.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Using Your VSD221 Smart Display  
In People , touch the Menu button on the device or the Menu button on the  
screen.  
Settings  
Descriptions  
Accounts  
NOTE: If you want to  
synchronize individual  
Contacts stored on your device can besynchronized  
with a computer using Mobile Sync; contacts stored  
on your personal e-mail account such as Gmail can  
data manually, clear Auto- be synchronized through an Internet connection.  
sync, and then from your To select the data to synchronize:  
account, touch a data item 1 Select Background data to make all the sync  
to start synchronization of options available.  
that data.  
2 Select Auto-sync to let the deviceautomatically  
While data is syncing, the synchronize the selected data in your Twitter  
sync icon appears on the  
option of the data being  
synced.  
account or e-mail account, which may include  
Twitter contacts and data, or Calendar, Contacts,  
Gmail, and Picasa WebAlbums data.  
To select the data to sync from your e-mail  
account:  
1 Touch your e-mail account to open the Data &  
synchronization list.  
2 Select the data that you want the device to  
synchronize automatically, such as Sync Calendar,  
Sync Contacts, Sync Gmail, Sync Picasa Web  
Albums.  
Import/Export  
You can import contacts from SD card to your  
device, export Contacts from your device to your SD  
card, and share visible contacts in multiple ways,  
such as Bluetooth or Gmail.  
4.2 Pop-up Menu  
Touch the Menu button on the device or the Menu button on the screen to  
open or close the pop-up menu that lists available options for the current ap-  
plication, or actions that you can perform on the current screen.  
Select an option or item on the pop-up menu  
Touch the Menu button on the device or the Menu button on the screen  
to open the pop-up menu.  
1
Touch the desired item on the pop-up menu.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Using Your VSD221 Smart Display  
4.3 Google Search  
You can use the Google Search widget to find  
websites and information on Google, applica-  
tions installed on your device, and contacts  
stored in your Contacts list.  
Search by typing  
From the Google Search widget on the Home screen, touch “Google”  
to open the Google Search widget below.  
1
Type a keyword or text into the box using the keyboard. As you type,  
the search results that fully or partially match the text being typed  
appear.  
2
Scroll the listed search results and touch the desired result.  
3
The matching application or the browser with matching web links  
opens.  
4
Touch the desired link if you want to view a web page.  
5
Search by voice  
Touch the microphone that appears beside the search box.  
1
Say the name or keyword of the item you want to search.  
2
The browser with matching web links opens.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Using Your VSD221 Smart Display  
4.4 Managing Your Device Settings  
4.4.1 Check storage spaces  
Touch the Home button │ Apps button │ Set-  
tings │ Storage. The screen displays the total  
and available space on the device, USB stor-  
age and SD card.  
Erase unwanted application data  
Touch the Home button │ Apps button │  
Settings │ Apps.  
1
Touch the application whose cache or data you want to remove.  
2
Touch Clear data under Storage to erase unwanted application data;  
touch Clear cache under Cache to erase unwanted cache.  
3
4.4.2 Remove the SD card safely  
Touch the Home button │ Apps button │  
Settings │ Storage.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Using Your VSD221 Smart Display  
Touch Unmount SD card under the SD Card section.  
2
Press and hold the Power button until the Power off menu appears.  
Then, touch OK to turn off the device.  
3
Pull out the compartment cover and then remove the SD card from  
your device.  
4
NOTE  
• Removing the SD card while the device is working may cause data loss or result in ap-  
plication errors. We suggest you unmount the SD card before removing it.  
4.4.3 Erase all data from your device  
Touch the Home button │ Apps button │  
Settings Backup & reset  
1
Touch Factory data reset tablet.  
2
Touch “Reset smart display” to erase everything after you read the  
warning.  
3
NOTE  
• Ensure that you have back up all the required data before erasing all data from your  
device.  
4.5 Connecting to HDMI-compliant Devices via Micro  
HDMI Input  
HDMI (High-Definition Multimedia Interface) is a compact audio/video  
interface for transferring uncompressed digital audio/video data. You can  
obtain the best user experience for video playback and gaming via HDMI.  
VSD221 is equiped with a micro HDMI input for connection to an external  
HDMI-compliant device. You can connect your PC, notebook, Blu-ray player  
or any other HDMI-compliant device to VSD221 for high-definition video  
display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Using Your VSD221 Smart Display  
How to begin  
A type A (HDMI) to type D (micro HDMI) HDMI cable must be available.  
1
2
Connect the Type A connector of the HDMI cable to the desired HDMI-  
compliant device.  
Connect the Type D connector of the HDMI cable to the micro HDMI  
port located on the back of your VSD221.  
3
4
5
For PC or notebook connection, always set the appropriate resolution.  
VSD221 supports with max. resolution of 1920*1080.  
To enable the touch screen function, connect the micro USB cable to  
micro USB connector of VSD221 and connect the other end to your  
PC or notebook.  
NOTE  
• The touch screen function will work with computers running Windows 7 or later versions  
without the need for additional drivers.  
4.6 Bluetooth Connection  
Bluetooth is a short-range wireless communi-  
cations technology that allows your device to  
connect to other Bluetooth-enabled devices  
over a wireless network. Bluetooth on your  
device operates in three different modes:  
Status  
On  
Descriptions  
Bluetooth is turned on. Your device is enabled to detect  
Bluetooth devices within range, but will not be found by  
them.  
Discoverable  
Off  
Bluetooth is turned on, and other Bluetooth devices can  
detect your device.  
Bluetooth is turned off. Your device cannot send and  
receive data using Bluetooth.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Using Your VSD221 Smart Display  
4.6.1 Turn on Bluetooth and make the device discoverable  
Touch the Home button │ Apps button │ Settings │ Bluetooth.  
1
Enable the Bluetooth function by touching “ON” to turn on Bluetooth.  
The Bluetooth icon appears in the status area of the system bar.  
2
4.6.2 Pair with a Bluetooth device  
Touch the Home button │ Apps button │ Settings │ Bluetooth. Ensure  
Bluetooth has been enabled on the device you want to pair with, and  
the device is in Discoverable state.  
1
Touch SEARCH FOR DEVICES. Your device starts to scan for  
Bluetooth devices within range and then displays all detected devices  
below the AVAILABLE DEVICES list.  
2
Detect more devices, touch Scan for devices.  
3
Initiate a connection with a device; touch the name of the device.  
4
You may be prompted to enter a password to authenticate. Enter the  
5
same password on both devices, or enter the password provided by  
the device manufacturer. Ensure that you read the documentation of  
the pairing device to check if it requires a default password.  
When the pairing is successful, paired but not connected devices are  
displayed under the “PAIRED DEVICES”.  
6
NOTE  
1. The message indicating successful pairing may vary depending on the type of the  
paired device.  
2. Pairing is a one-time process. Once your device successfully pairs with another device,  
your device recognizes that device without the need to re-enter the password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Using Your VSD221 Smart Display  
4.6.3 Terminate a pairing partnership  
Touch the Home button│ Settings │ Bluetooth.  
1
2
Under the Paired devices section, touch the icon next to a paired  
device.  
Touch Unpair to erase all pairing information with that device. You need  
to re-enter the password if you want to restore a Bluetooth connection  
to that device.  
3
4.6.4 Change your device’s Bluetooth name  
1
Ensure that you have turned on Bluetooth  
on your device  
(Icon in the status area of the system bar  
indicates that Bluetooth is enabled).  
Touch the Home button │ Settings Bluetooth. Tap the Menu button  
2
on the upper right-hand side of the screen to rename your smart  
display.  
Enter a name to identify the device when you connect using Bluetooth.  
3
Tap Rename. Your device’s Bluetooth name has been changed.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Internet  
5 Internet  
5.1 Connecting to the Internet  
To browse the web and access web-based  
utilities such as instant messaging, you can  
connect VSD221 to a LAN network via RJ-  
45 cable on LAN connector or set up a Wi-Fi  
connection.  
5.1.1 Wi-Fi connection  
Touch the Home button │ Apps button │Settings Wi-Fi to enable  
Wi-Fi function by touching “ON”. The device scans for available  
wireless networks.  
1
Touch Wi-Fi settings. The network names and security settings (Open  
network or Secured with WEP/WPA/WPA2/WPS) of discovered Wi-Fi  
networks display in the Wi-Fi networks list.  
2
Flick the list and touch to select a Wi-Fi network you want to connect  
to.  
3
Enter a password (if necessary), then touch Connect to connect to the  
Wi-Fi network.  
4
Connect to a network protected by Wired Equivalent Privacy (WEP), Wi-Fi  
Protected Access (WPA), WPA2, or Wireless Protected Setup (WPS), you  
must enter the WEP/WPA/WPA2/WPS security key to obtain authorized  
access to the network. The next time your device connects to a previously  
accessed secured wireless network, you will not be required to enter the  
WEP/WPA/WPA2/WPS key again, unless you reset your device to its factory  
default settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Internet  
5.1.2 Check the current Wi-Fi network connection  
From the status area of the system bar: When your device is connected to a  
wireless network, the Wi-Fi icon in the status area of the system bar  
indicates the signal strength (number of bands that light up). If Settings│Wi-  
Fi│ Network notification is enabled, the “?” icon appears in the notifications  
area of the system bar, as the device discovers an accessible Wi-Fi network  
within range.  
From the Wi-Fi network:  
Touch the Home button │ Apps button │ Settings Wi-Fi.  
1
Touch the Wi-Fi network that the device is currently connected to  
2
(labeled Connected). A screen opens displaying the Wi-Fi network’s  
name, status, security information, signal strength, link speed, and IP  
address.  
If you want to disconnect the Wi-Fi network from your device, touch  
Forget on this screen. You will need to configure the Wi-Fi settings  
again if you want to restore connection to this wireless network.  
3
5.1.3 Connect to another Wi-Fi network  
Touch the Home button │ Apps button │ Settings Wi-Fi. The  
detected Wi-Fi networks are displayed in the Wi-Fi networks list.  
1
Start a new search for available Wi-Fi networks, on the Wi-Fi settings  
2
screen, touch the Menu button on the upper right of screen │ Scan.  
Flick through the Wi-Fi networks list and touch the name of the network  
you want to connect to.  
3
If the wireless network you want to connect to is not on the list, tap the  
+” sign on the upper right-hand side to add your Wi-Fi network. Enter  
the Wi-Fi network settings, and then touch Save.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Internet  
5.2 Synchronizing Your Google Data  
Through a web connection, your device can  
synchronize your Google data including  
Gmail, calendar, and contacts with your com-  
puter or any other device that you use to ac-  
cess your Google account.  
Select the applications to synchronize  
1
Touch the Home button │ Apps button │  
Settings ACCOUNTS.  
In the ACCOUNTS section, tap the  
all the sync options. Such as Sync Calendar, Sync Contacts, Sync  
Gmail, Sync Picasa Web Albums.  
icon to check the box to enable  
2
3
If you want to add an account to be synchronized, tap on “+ Add  
Account” on the left of the screen under the account you want to  
synchronize.  
NOTE  
• While data is syncing, the sync icon appears on the option of the data being synced.  
5.3 Video Chat  
Equipping with a front webcam and a microphone, VSD221 allows  
communication with other users on the Internet. VSD221 supports various  
video chat apps from Google Play. By default, Google Talk is the most  
simple video chat application for Android devices and pre-installed already.  
Here’s a short list of what you will need to use the video chat function of  
Google Talk:  
• VSD221  
• Google Account  
• People to chat with (who also have a Google account and have been  
added into your Google Talk friend list)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Internet  
How to begin  
Authenticate your Google account  
1
2
You can do this by opening up Google Talk and then signing in to your  
Google Account. Before using video chat, you must first sign-in to your  
Google account.  
Invite the person  
Open Google Talk application. Locate to the person in your Google  
Talk friend list who you want to invite to the video chat. Make sure  
that the friend who you want to chat with is online. Then tap the video  
button  
in the right of your friend’s name.  
Wait for response  
3
Now, simply wait for the invited person to join in the video chat. Once  
your request has been accepted by the invited person, the display will  
be switched to the video chat window and the chat will begin.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
Customizing Your VSD221 Smart Display  
6 Customizing Your VSD221 Smart Display  
You can customize your device using the options available in the Settings  
application.  
6.1 Display Settings  
Change the display settings:  
Touch the Home button │ Apps button │ Settings Display  
1
You can configure the Wallpaper, Sleep and Font size here. For  
Wallpaper, you can also touch an area on the Home screen to open  
the Wallpaper configuration screen.  
2
Enable a setting, touch the setting option to select the check box.  
Disable a setting, touch the setting option to clear the check box  
3
Items  
Descriptions  
Refer to  
Wallpaper  
Sleep  
3.6.4 Change the Wallpaper  
Here you can configure the idling time for entering power  
saving mode. (e.g. 15 sec., 30 sec., 1, 2, 5, 10 or 30  
min. by default, it is set to 30 minutes.)  
Font size  
Set the Font size to your screen. (Small, Normal, Large  
or Huge, by default, it is set to Normal)  
6.2 Sound and Ringtone Settings  
Change the sound and ringtone settings:  
Touch the Home button │ Apps button │ Settings Sound.  
1
Select the list to locate and touch a desired option.  
2
To enable a setting, touch the setting option to select the checkbox ; to  
disable a setting, touch the setting option to clear the check box.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Customizing Your VSD221 Smart Display  
6.2.1 System settings  
Items  
Descriptions  
Touch Sounds  
Select this item check box to enable the touch sounds. By  
default, it is set to enable.  
Screen lock sound Plays a tone when the screen is locked and unlocked. By  
default, it is set to enable.  
6.2.2 Notifications settings  
Items  
Descriptions  
Notification  
ringtone  
1. Select a desired ringtone for notifications from the  
Ringtones menu that appears.  
2. Touch OK to confirm the selection.  
6.3 Date, Time, and Time Zone  
Manually set the date, time and time zone:  
Touch the Home button │ Apps button │ Settings Date & time.  
1
The related configuration about Date & time will appear on the right  
section.  
2
Touch the desired item.  
3
If you want to automatic date & time, please select the Automatic date  
& time check box. When this check box is not selected, you can set the  
date & time by manually.  
4
Items  
Descriptions  
Automatic date &  
time  
Use network-provide time zone automatically.  
Set date  
1. Touch Set date item to adjust the day, month, and  
year; you can also touch the day, month, or year to  
flick to the desired value.  
2. Touch Done to confirm the date.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Customizing Your VSD221 Smart Display  
Items  
Descriptions  
Set time  
1. Touch Set time item to adjust the hour and minute;  
you can also touch the hour or minute to flick to the  
desired value.  
2. Touch the AM/PM field if the 12-hour format is in use.  
3. Touch Done to confirm the time.  
Set time zone  
Select a city or region that represents the time zone for  
your device. Touch the Menu button to sort the time zone  
list alphabetically or by time zone.  
Use 24-hour format  
Select date format  
Clear this check box to display the time in 12- hour  
format.  
Select the format to be used for displaying the date.  
6.4 Language & Input Settings  
Set the language of the display text:  
Touch the Home button │ Apps button │ Settings Language &  
input Language. By default, the Language is set to English.  
1
Select a language of your choice from the list that appears.  
2
A Spell checker function is also supported. Tap the Spell checker  
check box to enable this function.  
3
For extra defined wording, touch the Personal dictionary, then touch  
ADD on the upper right of screen to add new defined wordings to your  
personal dictionary.  
4
Set the Keyboard & Input:  
Touch the Home button │ Apps button │ Settings Language &  
input Keyboard & input methods  
1
To enable a setting, touch the setting option to select the check box; to  
disable a setting, touch the setting option to clear the check box.  
2
You can also touch setting icon for each selection for advanced  
configurations.  
3
NOTE  
• Here you can also configure the speech of voice, test output and pointer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
Customizing Your VSD221 Smart Display  
6.5 OSD Settings  
Touch the OSD icon on the left of system  
bar to pop-up OSD configuration screen.  
Refer to 3.4 Navigation buttons. The OSD  
configuration screen can be used to adjust  
the volume, brightness, contrast and so on.  
6.5.1 Adjustment Bars  
Volume:  
Touch and drag the slider on the Volume bar to adjust the volume. Drag the  
slider to the right, the volume is louder. By default, the volume is set to 70.  
Brightness:  
Touch and drag the slider on the Brightness bar to adjust the brightness of  
your screen. Drag the slider to the right, the screen is brighter. By default, the  
brightness is set to 75.  
Contrast:  
Touch and drag the slider on the Contrast bar to adjust the contrast of  
screen display. Drag the slider to the right, the contrast is larger. By default,  
the contrast is set to 75.  
6.5.2 Functions Buttons  
SRS:  
SRS (Sound Retrieval System), touch this  
button to enable SRS function.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Customizing Your VSD221 Smart Display  
Main or HDMI:  
- When input source is internal HDMI  
(Android), this item will show you HDMI.  
- When input source is external HDMI, this  
item will show you Main.  
Default:  
Touch Default button to restore the Volume, Brightness and Contrast to  
default value.  
Back:  
Touch Back button to close the OSD configuration screen and go back to the  
original processing screen.  
NOTE  
• OSD language supports English, Deutsch (German), Francais (French), Italian, Span-  
ish, Japanese, Simplified Chinese and Traditional Chinese.  
6.5.3 OSD Notice  
Waiting:  
The ViewSonic notice screen will pop-up  
during your OSD configurations.  
No signal:  
The connection for your HDMI is not ready.  
The connection between HDMI device and  
your smart display is not normalization.  
The No signal information screen will pop-up  
as below:  
Power off or OSD setting for HDMI source:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
Protecting Your VSD221 Smart Display  
7 Protecting Your VSD221 Smart Display  
7.1 Protect Your Device Data with a Screen Unlock  
Pattern  
You can protect your device data against unauthorized access by locking the  
touch screen with a screen unlock pattern. Once the unlock pattern is en-  
abled and the screen is locked, you need to draw the correct unlock pattern  
to unlock the screen.  
After you fail to draw the correct unlock pattern on the screen for five consec-  
utive times, you will be asked to wait for 30 seconds before you can try again.  
If you no longer remember your screen unlock pattern, follow these steps to  
unlock your screen:  
Touch Forgot pattern.  
1
When prompted, sign in to the Google website using your Google  
account name and password.  
2
Draw a new screen unlock pattern.  
3
7.1.1 Create a screen unlock pattern  
Touch the Home button │ Apps button │ Settings Security.  
1
Touch Screen Lock section → Pattern.  
2
Read the instructions on the screen and study the animated example  
of how to draw a pattern. Then, touch Next when you are ready to  
draw your own pattern.  
3
Drag your finger to draw the unlock pattern by connecting at least four  
dots in a vertical, horizontal and/or diagonal direction. Take your finger  
off the screen when a pattern is drawn.  
4
NOTE  
You must touch and drag your finger on the screen to create the pattern.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Protecting Your VSD221 Smart Display  
The device records the pattern if it is correctly drawn. Touch Continue.  
1
Draw the pattern again as prompted, and then touch Confirm.  
2
NOTE  
• If you want to change your unlock screen pattern, you need to draw the old pattern to  
confirm before creating a new pattern.  
7.1.2 Change unlock pattern settings  
Touch the Home button │ Apps button │ Settings Security.  
1
Once the pattern setting is enabled; under the Screen lock, Unselect  
Make pattern visible check box if you do not want the lines of the  
unlock pattern to display on the screen when you draw it.  
2
7.2 Disable the screen unlock security  
Touch the Home button │ Apps button │ Settings Security.  
1
Select None to disable screen unlock security.  
2
7.3 Protect Your Device Data with a PIN  
Touch the Home button │ Apps button │ Settings Security.  
1
Touch Screen Lock section → PIN.  
2
On the Choose your PIN screen appears, enter a PIN in the textbox.  
Your PIN must be 4 characters at least.  
3
Touch Continue to proceed.  
4
Enter the PIN again to confirm.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Protecting Your VSD221 Smart Display  
Touch OK.  
6
7.3.1 Disable or change PIN  
Touch the Home button │ Apps button │ Settings Security.  
Touch Screen Lock section.  
1
2
3
4
Enter the PIN code you have configured, and then touch Continue.  
Select None secured to disable the PIN; select PIN to change PIN  
code.  
7.4 Protect Your Device Data with a Password  
Touch the Home button │ Apps button │ Settings Security.  
1
Touch Screen Lock section → Password.  
2
On the Choose your password screen appears, enter a password in  
the text box. A valid password consists of at least 4 characters and  
contains at least one letter.  
3
Touch Continue to proceed.  
4
Enter the password again to confirm.  
5
Touch OK.  
6
7.4.1 Disable or change the password  
Touch the Home button │ Apps button │ Settings Security.  
1
Touch Screen Lock section.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Protecting Your VSD221 Smart Display  
Enter the password you have configured.  
3
Select None secured to disable the password; select Password to  
change the password.  
4
NOTE  
• Once the screen lock is secured with Pattern, FaceUnlock, Pin and Password, the Au-  
tomatically lock will appear under Screen lock. By default, it is set to 5 seconds after  
entering sleeping mode.  
7.5 Power Saving Feature  
In order to save energy,this device supports power saving mode (sleeping  
mode). The device will enter power saving mode when you idle without  
processing. Then, the screen will go off. You can set the duration of screen  
to remain on before entering sleeping mode, touch the Home button │ Apps  
button │ Settings Display Sleep.  
7.6 Power Management Information  
Please turn of the product when it will not be used for long time. This could  
potentially increase the life and decrease the power consumption of the  
product.  
Power Indicator  
LED Status  
Power ON  
Green  
Power Standby  
Power OFF  
Orange  
LED OFF  
Power On – In off mode, push the power button 1-2 seconds to enter power  
on mode  
Power Standby – In power on mode, push the power button to enter standby  
mode  
Power Off – In power on mode, push the power button more than 4 seconds  
and select “OK” in the dialog box to enter off mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
Troubleshooting  
8 Troubleshooting  
8.1 Touch Screen Problems  
Problems  
Causes  
Solutions  
Touch screen does  
not respond to hand  
gestures or render  
them properly.  
Dust, particles or any  
foreign material on the  
camera’s or reflector’s  
surface may affect image  
quality and the display’s  
touch function.  
1. Remove any dust or  
particles from the reflector  
and camera using  
compressed air.  
2. Gently clean the cameras  
and reflector surface  
carefully with a soft  
antistatic brush to avoid  
scratches.  
3. Clean any remaining dust  
with a clean, dry dust-free  
cloth.  
8.2 Messaging Problems  
Problems  
Causes  
Solutions  
Unable to send  
or receive text  
messages.  
The signal strength is not Try moving to a different  
strong enough.  
location for better signal  
reception.  
Unable to send or  
receive e-mail.  
The Internet connection  
or the e-mail setting is not connection, and confirm with  
configured properly.  
Check your network  
your e-mail service provider  
if your e-mail setting has  
been configured correctly.  
Unable to connect to You are not within the  
Check the service area with  
your service provider.  
the network.  
network’s service area.  
Poor signal.  
Move to an open space or  
if you are inside a building  
move closer to a window.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Troubleshooting  
8.3 Other Problems  
Problems  
Solutions  
No power  
Press and hold the power button for at least three seconds  
(Page 12, Section 2.3), if the LED does not light green with  
the device booting-up then:  
-
Ensure that the power adaptor is plugged-in to a suitable  
power socket  
-
Ensure that the DC connector is fully inserted into the correct  
socket on the rear of the VSD221 located under the cover  
(see page 8 and 11)  
-
-
Check the power socket with another device (i.e. table lamp)  
If there is still no power then contact ViewSonic support or  
the Reseller from whom the device was purchased  
No display  
Lock-up  
Check external HDMI device and connections.  
Restart by pressing and holding power button.  
Check with App author.  
App doesn't  
function  
No network  
No audio  
Check WiFi settings, try Ethernet if available.  
Check volume level setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
Appendix  
9 Appendix  
Specification  
LCD Spec.  
Size  
54.6 cm (21.5”)  
Resolution  
1920x1080  
White Luminance  
Contrast Ratio  
Response time  
Viewing Angle  
250/200 (Max./typ)  
1000/700 (typ/min.)  
5ms (typ)  
170/160 (horizontal/vertical)  
System  
Operating System  
CPU  
System Memory  
Storage  
Android Jelly Bean 4.1  
TI OMAP 4470, Dual-core ARM® Cortex-A9, 1.5GHz  
DDR2 1GB  
eMMC 8GB  
WLAN/Bluetooth  
Camera  
802.11b/g/n + Bluetooth V2.1  
Front: MIPI 1.3M - HD  
Microphone  
LED Indicator  
Power Switch  
Internal MIC x1, digital type  
Green (on) / Orange (saving)  
One standby power button (power on/off/suspend/  
resume)  
I/O ports  
HDMI x 1 (Micro type)  
USB x 2  
USB x 1 (Micro type, supports OTG)  
3.5mm Headphone-out  
LAN (RJ45, supports 10/100 Mbps)  
DC Jack (ID 1.7mm, OD4.0mm)  
SD card slot (Micro type)  
Touch screen  
Touch controller  
Speakers  
Optical touch type, with glass  
One touch & Gesture  
1W x 2  
Adapter (DC)  
Input: 100~240Vac, 50-60Hz, 1.2A (or 1A)  
Output: DC Jack 19V, 2.1A, 40W max.  
Power Consumption  
Power Save  
Stand  
30W typ.  
Standby mode < 1W, Off mode < 0.5W  
Photo-frame type  
Optional  
512.8 mm (L) x 353 mm (H) x 24.8mm (W)  
Gross: 5.8kg  
Net: 4.8Kg  
VESA® mount  
Dimension  
Weight  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
Appendix  
Operation environment  
Temperature  
Humidity  
+0oC~+40oC  
5%~85%  
Air pressure  
86~106 Kpa  
Storage environment  
Temperature  
-20oC~+60oC  
Relative Humidity  
Air pressure  
Radiation Solar heat  
20%~95%  
86~106 Kpa  
1.12 kWh/m2 (IEC68-2-5, 72hrs)  
Accessories  
Power cord (1M)  
Power adapter  
Micro HDMI to HDMI cable (Optional)  
Micro USB to USB cable (Optional)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
NOTE: You will need the product serial number.  
T = Telephone  
F = FAX  
Country/Region  
Website  
Email  
AUS= 1800 880 818  
NZ= 0800 008 822  
Australia/New Zealand  
T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533  
F= 1-909-468-3757  
Canada  
Europe  
Hong Kong  
India  
T= 852 3102 2900  
T= 1800 266 0101  
T= 080 333 2131  
T= 0800-4441185  
T= 1230-020-7975  
T= 01800-9-157235  
T= 001-8882328722  
Korea  
Latin America  
(Argentina)  
Latin America (Chile)  
Latin America  
(Columbia)  
Latin America (Mexico)  
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS  
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16  
Latin America (Peru)  
Macau  
ap.viewsonic.com/me/  
T= 0800-54565  
T= 853 2870 0303  
Contact your reseller  
Middle East  
T= 1-800-688-6688 (English)  
T= 1-866-379-1304 (Spanish)  
F= 1-909-468-3757  
Puerto Rico & Virgin  
Islands  
Singapore/Malaysia/  
Thailand  
ap.viewsonic.com/za/  
T= 65 6461 6044  
South Africa  
Contact your reseller  
T (Toll-Free)= 1-800-688-6688  
T (Toll)= 1-424-233-2530  
F= 1-909-468-3757  
United States  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
Limited Warranty  
ViewSonic® Smart Display  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship,  
under normal use, during the warranty period. If a product proves to be defective in  
material or workmanship during the warranty period, ViewSonic will, at its sole option,  
repair or replace the product with a like product. Replacement product or parts may  
include remanufactured or refurbished parts or components.The replacement unit will be  
covered by the balance of the time remaining on the customer’s original limited warranty.  
ViewSonic provides no warranty for the third-party software included with the product or  
installed by the customer.  
How long the warranty is effective:  
ViewSonic Smart Display products are warranted for at least 1 year for labor from the  
date of the first customer purchase.  
User is responsible for the back up of any data before returning the unit for service.  
ViewSonic is not responsible for any data lost.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature,  
unauthorized product modification, or failure to follow instructions supplied with  
the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Causes external to the product, such as electric power fluctuations or failure.  
d. Use of supplies or parts not meeting ViewSonic’s specifications.  
e. Normal wear and tear.  
f. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as “image burn-in” which results  
when a static image is displayed on the product for an extended period of time.  
4. Removal, installation, insurance, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer  
Support (Please refer to the web site and Customer Support pages). You will need to  
provide your product’s serial number.  
2. To obtain warranty service, you will be required to provide (a) the original dated sales  
slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the  
serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized  
ViewSonic service center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center,  
contact ViewSonic.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description  
contained herein including the implied warranty of merchantability and fitness for a  
particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product.  
ViewSonic shall not be liable for:  
1. Damage to other property caused by any defects in the product, damages based  
upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of  
business opportunity, loss of goodwill, interference with business relationships, or  
other commercial loss, even if advised of the possibility of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
4. Repair or attempted repair by anyone not authorized by ViewSonic.  
OTA update disclaimer:  
ViewSonic Corporation assumes no liability for any errors or omissions in the information  
displayed. This firmware update is intended for ViewSonic® smart display. ViewSonic  
assumes no liability for data loss or any damages caused as a result of any updates  
made on any device or damage to or failure of other equipment to which the products  
are connected, whether incidental, consequential or otherwise. You agree to take full  
responsibility for all files and data and to maintain all appropriate backup of files and data  
stored on any device prior to performance of any update. Users shall be responsible  
for obtaining the necessary rights to access and use any third party content. ViewSonic  
assumes no liability for the performance, availability and use of third party products and  
services. Corporate names and trademarks mentioned herein are the property of their  
respective companies. Copyright © 2013 ViewSonic Corporation. All rights reserved.  
4.3: ViewSonic Smart Display Warranty  
SD_LW01 Rev. 1A 08-21-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
Manufacturer’s Declaration of Conformity  
The ViewSonic brand Product VS15006 (Model name: VSD221) has been designed  
and manufactured in accordance with the Directive 1999/5/EC of European Parliament  
and the Council on Radio equipment and Telecommunication Terminal equipment. The  
product is in conformity with the following standards and/or other normative documents:  
1. EMC  
Standard  
Title  
Testing Body  
Report No.  
EN55022: 2010  
Limits and methods of measurement of radio Burea Veritas  
CE120605D14A  
interference characteristics of information  
technology equipment  
Consumer  
Products  
Services(H.K.) Ltd.  
Taoyuan Branch  
EN55024:2010  
Information Technology Immunity standard  
EN61000-3-2: 2009 Disturbances to residential supply system  
Part 2 : Harmonics  
EN61000-3-3: 2008 Disturbances in supply systems caused by  
household appliances and similar electrical  
equipment.  
Part 3: Voltage fluctuations  
Part 1: Common technical requirements  
2. HEALTH & SAFETY  
Standard  
Title  
Testing Body  
Report No.  
EN60950-1: 2011  
Information technology equipment – Safety - UL-DEMKO  
Part 1: General requirements  
DK-27650-UL  
EN50332-1:2000  
EN50332-2:2003  
Sound system equipment: Headphones  
and earphones associated with portable  
audio equipment-Maximum sound pressure  
level measurement methodology and limit  
considerations. Part 1: General method for  
“one package equipment”. Part 2: Matching  
of set with headphones if either or both are  
offered separately.  
N/A  
N/A  
EN62311:2008  
EN62209-1:2006  
EN62209-2:2010  
Assessment of electronic and electrical  
equipment related to human exposure  
restrictions for electromagnetic fields (0 Hz -  
300 GHz)  
Procedure to determine the specific  
absorption rate (SAR) for hand-held devices  
used in close proximity to the ear (frequency  
range of 300 MHz to 3GHz  
Human exposure to radio frequency fields  
from hand-held and body-mounted wireless  
communication devices. Human models,  
instrumentation, and procedures. Procedure  
to determine the specific absorption rate  
(SAR) for wireless communication devices  
used in close proximity to the human body  
(frequency range of 30MHz to 6GHz)  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
3. SPECTRUM  
Standard  
Title  
Testing Body  
SGS  
Report No.  
EC/2012/70005  
EN301489-1 V1.8.1 Electromagnetic compatibility and Radio  
EN301489-17  
V2.1.1  
spectrum Matters (ERM); Electromagnetic  
Compatibility (EMC) standard for radio  
equipment and services. Part 1: Common  
technical requirements. Part 17: Specific  
conditions for Wideband data and HIPERLAN  
equipment. Part 24: Specific conditions for  
IMT-2000 CDMA Direct Spread(UTRA) for  
Mobile and portable(UE) radio and ancillary  
equipment.  
Part 3: Specific conditions of Short-Range  
Devices(SRD) operating on frequencies  
between 9kHz and 40GHz.  
Part 7: Specific conditions for mobile and  
portable radio and ancillary equipment of  
digital cellular radio telecommunications  
systems(GSM and DCS).  
EN300328 V1.7.1  
Electromagnetic compatibility and Radio  
spectrum Matters (ERM) - Wideband  
transmission systems - Data transmission  
equipment operating in the 2,4 GHz ISM band  
and using wide band modulation techniques  
- Harmonized EN covering essential  
requirements under article 3.2 of the R&TTE  
Directive  
SGS  
EF/2012/70011  
EN301511 V9.0.2  
Global System for Mobile  
N/A  
N/A  
EN301908-2 V4.2.1 communication(GSM) Harmonized EN for  
mobile stations in the GSM900 and GSM1800  
bands covering essential requirements of  
article 3.2 of the R&TTE directive(1999/5/EC)  
Eletromagnetic compatibility and Radio  
spetrum Matters(ERM); Base Stations(BS)  
and User Equipment(UE) for IMT-2000  
Third-Generation cellular networks;Part 2:  
Harmonized standrad for IMT-2000, CDMA  
Direct Spread(UTRA FDD)(UE) covering  
essential requirement of article 3.2 of the  
R&TTE Directive  
EN301908-1 V4.2.1 Eletromagnetic compatibility and Radio  
spetrum Matters(ERM); Base Stations(BS)  
and User Equipment(UE) for IMT-2000  
Third-Generation cellular networks;Part 1:  
Harmonized EN for IMT-2000 introduction and  
common requirements, covering the essential  
requirements of article 3.2 of the R&TTE  
Directive  
EN300440-1 V1.6.1 Electromagnetic compatibility and Radio  
EN300440-2 V1.4.1 spectrum Matters(ERM);Short range  
devices;Radop equipment to be used in the  
1GHz to 40GHz frequency range;Part 1:  
Technical characteristics and test methods.  
Part 2:Harmonized EN covering essential  
requirements of article 3.2 of the R&TTE  
Directive  
N/A  
N/A  
N/A  
N/A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
3. ErP Directive : 2009/125/EC  
Standard  
Title  
Testing Body  
Report No.  
(EC) 1275/2008  
Eco-design requirements for standby and  
off mode electric power consumption of  
electrical and electronic household and office  
equipment  
Quanta Computer N/A  
(EC) 278/2009  
Eco-design requirements for no-load condition Delta Electronics N/A  
electric power consumption and average  
active efficiency of external power suppliers  
Inc.  
__________________________  
Sophia Wu, Compliance Manager  
ViewSonic Corporation  
August 23, 2012  
Date  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Technicolor Thomson CRT Television 14MG10F User Manual
Topfield TV Receiver High Definition Digital Satellite Receiver Personal Video Recorder User Manual
Toshiba All in One Printer E1 17063A User Manual
Toshiba Projector TLPX10E User Manual
Transition Networks Power Supply CPSMP 200 User Manual
Ultimate Ears Headphones UE4 0000 0 User Manual
Vornado Electric Heater IR400 User Manual
Weber Gas Grill 3500 LX User Manual
Weber Gas Grill 42097 User Manual
Weed Eater Blower 545186752 User Manual